im series specification - oxford flow
TRANSCRIPT
PRODUCT OVERVIEWThe IM Series gas regulator range offers excellent pressure control for gas distribution and transmission applications.
The patented, compact construction significantly reduces weight and the need for expensive lifting equipment during installation and maintenance.
The IM Series wafer-type gas regulator fits between PN or ANSI flanges, minimising installation footprint. The unique design employs a single, sensed piston instead of a diaphragm, increasing reliability and reducing maintenance costs.
APPLICATIONS
For use with all clean, dry gases. Not for use as a safety device.
Max. Inlet Pressure 100 bar / 1450 psi
Outlet Pressure range 0.02-99 bar / 0.3-1435 psi 1
Leakage ANSI FCI 70-2: CLASS VI
Lock-up Class SG 5
Accuracy Class down to AC 1
PED Category Cat II
• Certified to BS EN 334
• Low installation and maintenancecosts
• Accurate pressure control
• Compact and lightweight
• Piston sensed - no diaphragm
• Robust and reliable
• Small installation footprint
PERFORMANCE & SIZINGThe IM Series Regulators are available in sizes DN50-DN150 (2"-6"), Regulators can be installed between PN10 - PN100 and ANSI #1503 - #600 flanges.with flow capacities as follows;
IM Series CG
DN50 (2”) 966
DN80 (3”) 2,163
DN100 (4”) 3,445
IM SERIES SPECIFICATIONHigh performance, Wafer-type gas pressure regulatorDN50-DN150 (2"-6")
Rev 11/20
Temperature range -20 - 60oC / -4 - 140oF 2
CV
33
79
129
29
69
112
KV
30
27
27
C1KG
1,047
2,275
3,624
DN150 (6”) 7,691 290 8,091 253 273 DN50 and DN80 sizes not compatible with ANSI #150 flanges
1 Dependent on pilot valve. It is recommended that the IM
Regulator be used with the Oxford Flow PRX1 pilot2 With standard HNBR seals. Other seals are available, contact
Oxford Flow to discuss media compatibility
BENEFITS & FEATURES
Oxford Flow Ltd, Osney Mead, Oxford, UK, OX2 0ESOxford Flow Americas, Inc, Houston, TX 77084E: [email protected] T: UK: +44 (0)1865 595248 / US: 713-491-6191 W: oxford-flow.com
IM SERIES GAS REGULATORHigh performance, Wafer-type construction For DN50-DN150 (2"-6")
DIMENSIONS AND WEIGHTS
Key dimensions
Nominal Diameter Diameter (A) Length (B) Height (C) Width (D) Weight
(kg / lb)DN50 (2”) 107mm / 4.2" 121mm / 4.8" 240mm / 9.4" 260mm / 10.2" 11 / 24 DN80 (3”) 142mm / 5.6" 135mm / 5.3" 275mm / 10.8" 280mm / 11" 16 / 35 DN100 (4”) 162mm / 6.4" 155mm / 6.1" 295mm / 11.6" 290mm / 11.4" 21 / 46 DN150 (6”) 218mm / 8.6" 205.5mm / 8.1" 350mm / 13.8" 330mm / 13" 42 / 92
Components Materials
Body Stainless steel 316
Actuator Stainless steel 316
Seat HNBR
Trim Stainless steel 316
‘O’ Ring seals HNBR
Actuator seal HNBR
Pilot Aluminium 6082-T6 & stainless steel 316
CONSTRUCTION MATERIALS
SIMPLE INSTALLATION
Oxford Flow Ltd, Osney Mead, Oxford, UK, OX2 0ESOxford Flow Americas, Inc, Houston, TX 77084E: [email protected] T: UK: +44 (0)1865 595248 / US: 713-491-6191 W: oxford-flow.com Rev 11/20
C
B A D