ifo sign toilet increased height p trap - enwareresource.enware.com.au/installation...
TRANSCRIPT
Version: Sep 15
Call 1300 369 273www.enware.com.au/ifo Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: 02 8536 4000 Fax: 02 8556 4055
Certi�kate Nr. 2004-SKM-AE-825ISO 14001:2004
Certi�kate Nr. 2004-SKM-AQ-2054ISO 9001:2000
Certi�kate Nr. 2004-SKM-AE-825ISO 14001:2004
Certi�kate Nr. 2004-SKM-AQ-2054ISO 9001:2000
AS 1172.1AS 1172.2
WMKA21026IAPMO R&T
Ifo Sign Toilet Increased Height P Trap AS1428.1:2009
IFO6872
IFO6872 - IFO - Toilet AS1428.1:2009 set up - P Trap
Product Code
FEATURES
• Free Standing WC
• 460 mm seat height (excluding seat)
• 800 mm finished wall to front of pan (based on 200 mm off set)
• 95 degree cistern to pan angle
• Cistern complies with all angles thrust test (for AS1428.1:2009) of 1100 N for backrest requirements
• Pan load rated to 400 kg
• Seamless cistern offering back and side transfer support
• Increased foot print for enhanced stability
• Allows for undisturbed coving seal
• Tested to comply with 90% of commonly used Australian shower commode chairs
• WELS 4 star rated (4.5/3L Flush)
• Fully glazed on back and inside rim to avoid bacteria growth
• Patented Fresh WC blue stick technology enabled for increased infection control
• All pans are to be fixed using high grade anti-bacterial silicone of appropriate colour and where exposed mounting holes are provided, 316 stainless steel screws are to be used.
• Provides 100% consistency and reliability as combined wc and back support - no additional backrest needed to meet requirements of AS1428.1:2009**
** Refer to AS1428.1:2009 for height and spacial requirements
*Seat not included
White freestanding toilet suite with 460mm seat height, with cistern as resevior and backrest.
OPTIONS
Pressalit Hard Seat - anthracite grey IFO554112-BD1999
IFO Sign Raised Flush Button IFO98308
Floor Anchor IFO98015
Fresh Sticks - 10 packets of 5 sticks IFO94568
The morestars the morewater efficient
A joint government and industry program
Licence No. 0058
When tested in accordance with Standard AS/NZS 6400
For more information and to compareproducts, refer to:
www.waterrating.gov.au
litres per full flush4.5
3.3 litres per average flush
litres per half flush3
Images show Raised Height Button and Pressalit Care Toilet Seats - these are not supplied as standard, but can be ordered separately - see options.
Call 1300 369 273www.enware.com.au/ifo Enware Australia Pty Limited 9 Endeavour Rd Caringbah NSW 2229 Australia Ph: 02 8536 4000 Fax: 02 8556 4055
Version: Sep 15
Ifo Sign Toilet Increased Height P Trap AS1428.1-2009
355
900
460
95
400-455
650
40
190
Ø100
40100
95˚
IFO6872
1100 N all anglesthrust test compliant
400 kg loadrating compliant
Back View Side View
9528
1
www.ifosanitar.com
Assembly instructions
Ifö Sign/Sign Fix/Sign Art 39-12-3
6832, 6840, 6860, 6861, 6862, 6870, 6872, 6873, 6893, 6894
WC-Unit
6860 6862
6870 6893
68406832 6861
6872 6873 6894
2
Spare parts •
9676620
9895198960 27
27
91966 29
96773 31
1 96763
966602
917823
9676121
9675921 96777
2196784
21
983046
983057
983024
983035
983008
983079
9830810
9830911
9831012
9831213
9831314
9053136
9053334
9043937
9043738
3290532
3390536
3590441
3990442
91967 för 6893/6894,6832
30
15 96767
16 96768
17 96765
96769189678218
9838145
94751 44
9894942
94752 43
9803047
9801546
9053540
9053441
90610199061319
2396770
2296771
2491930
2525
9676496783
96783
26 96781 26 96772
96760 28
9
Ifö Sign 6860, 6861You have chosen the optimum standard WC unit with built-in S-trap. It can usually be installed as quickly and easily, and in the same situations, as WC units with traditional open S-traps.
Remember that the cover must be positioned before installation, see image .6
DosingWC connections
The water connection to the cistern inlet is a 1/2" BSP male. Looking from the front of the pan, it is located on the right hand side, on the bottom of cistern. See Image 1
See page 29 for connection dimensions and other dimensions on WC units.
Bonding/Siliconing
Thank you for choosing Ifö Sign.You have chosen an environmentally friendly, easy to clean and elegantly designed WC unit. To guarantee correct and reliable installation of this product we urge you to follow the installation instructions. Enware cannot accept liability for damage that occurs as a result of faulty installation.
Ifö Sign 6832, 6862, 6872
These WC units are designed for connection to waste in walls – P-trap.
For toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports, it is recommended that the toilet pan be �xed tothe �oor using stainless steel pan screws (supplied - IFO98381) together with a silicone bed, or �xed using a water proof �oor mounting bracket (IFO98015). The �oor surface should be as �at and level as possible, to ensure stability. Fixing the toilet pan with only the silicone seal is not considered to be an adequate method of �xing.
Waterproof Floor Mounting
Aavailable as options:
Waterproof �oor mounting IFO98015 - installation- see image 7.
Waterproof �oor mounting IFO98030 - installation- see image 8.
This WC unit is suitable for bonding/siliconing, see images 11-15.The method applies to installation of WC units using elastic silicone joint. First clean the �oor to obtain a dry and grease-free surface. Do not use the WC before the silicone has cured.
If the WC unit is bonded / siliconed to the �oor, thesupplied blind cover plugs (IFO94752) must be usedin the screw holes on the WC unit.
This WC is prepared for the Fresh WC function, with ahygienic dosing of a tablet through the �ush button.The tablet is placed inside the �ush armature by opening the �ush button and releasing the tablet in the blue coverscrew, as illustrated in images 16 - 17.
Depending on the content of the tablet, it produces a fresh odour, cleaning e�ect on the whole bowl and colour.
This solution di�ers from traditional odour and cleaningblocks that are suspended from the rim of the bowl, by perfectly rinsing the entire bowl and retaining full �ushinge�ect.
Ifo Fresh Sticks are available from Enware. Product code IFO94568 - 10 packets of 5 sticks.
Each increment is 1 litre, adjustable from 2-5 litres, or from 2-3 litres for model 6832.
unit by turning it a quarter turn clockwise and then lifting
Flush volume
button, cut away the catch on the lever arm as shown in
so that the rear catch is installed facing forwards
10
Flush button
Removal of Flush Button and cistern cover
Servicing Cistern Components
This WC-unit is test approved according to NT VVS 120
If necessary
See images 30 - 32.
, . 2423
30
31
Reinstalling
Maintenance advice and cleaning
Reinstall in reverse order. The screws for the cistern mounting must be tightened alternately to a maximum torque of 2.5 Nm as illustrated in image 35. The cover screw must be tightened to a maximum torque of 1.0 Nm as illustrated in image 37.
32
33
WC units, bidets and wash basins have a glazed surface. Glazed surfaces are easy to keep clean and are resistant against most chemicals. Clean regularly to prevent cleaning problems. Use normal cleaning agents.
“Clean regularly to prevent cleaning problems. However,
use hot water and soap and wipe dry with a cloth”.This is because cleaning agents for porcelain are not intended for chrome parts/plastics and can risk cracking
Cleaning utensils, which contain abrasive agents, such as wire wool and green scouring pads, must not be used. Strong acids, e.g. hydrochloric acid and sulphuric acid and strong alkalines, e.g. caustic soda should not be used. Dripping taps and running WC units must be repaired immediately.
For repair or to purchase spare parts, contact your local plumbing contractor or plumbing centre. For more inform-ation, contact Enware.
If the toilet is subject to freezing temperatures, the WC
0.3 - 0.4 litres of anti-freeze into the water trap and cover
evaporation.
Ifö Sign 6893, 6894
Note: Inlet Water Pressure Max. 500 kPa (AS 3500.1)
You get more free �oor space with a wall-hung style WC unit. It facilitates easier cleaning of the bathroom �oor.
Ifo Sign WC units are supplied with:
- Polished chrome �ush button (IFO98303)
Optional:Raised Chrome Button (IFO98308)
Remove the �ush button, cover mounting and cover asillustrated in images 16-22.
If the WC unit runs - �rst check that the outlet valve'soutlet seal washer is not damaged. If it is, replace the outlet washer (IFO96765), as illustrated in images 23-25.Then check that the inlet valve closes correctly. If it doesnot, replace the inlet valve (IFO96766) as illustrated inimages 26-28.
The lever arm to the inlet �oat is normally installed on the lower �oat setting for optimum water �ow. Thissetting can handle a water pressre of 10 bars. In theevent of the WC unit running at high water pressures,the lever arm can be moved to the upper setting andthen handles a maximum water pressure of 12 bars. See image 29.
11
Spare partsPos Designation Enware Part Code
1. Cover screw IFO967632. IFO966603. 4. 5. IFO983036. 7. 8. 9. IFO9830710. IFO9830811. 12. 13. 14. 15. Bridge assembly IFO9676716. IFO9676817. Outlet valve seal washer IFO9676518. Outlet valve assembly IFO96769
Outlet valve assembly, 6832 IFO9678219. Cistern cover, white IFO90610
Cistern cover, 6832, white IFO9061320. Inlet valve assembly IFO9676621. Inlet pipe assembly IFO96761
Inlet pipe assembly, Sign 6893, 6894 IFO96759
Inlet pipe assembly, Sign 6832 IFO9678422. IFO9677123. IFO9677024. Catch IFO9193025.
O-ring frame, 6832 IFO9678326. Frame assembly IFO96772
Frame assembly, 6832 IFO9678127. Inner cistern with gasket IFO98951
Inner cistern with gasket, 6832 IFO9896028. Seal cistern – bowl IFO9676029. Water distributor 30. Water distributor for 6893/6894/6832 IFO9196731. Gasket bowl IFO9677332. Bowl with built-in S-trap, white, 6860 IFO9053233. Bowl with built-in S-trap, white, raised, 6861 IFO9053634. Bowl universal trap, white, 6862 IFO9053335. Bowl universal trap, white, raised, 6872 IFO9044136. 37. 38. Bowl, white for 6893 IFO9043739. 40. 41. 42. Cistern mounting IFO9894943. White plugs x4 IFO9475244. 45. Floor screws + white caps + white plugs IFO9838146. Floor mounting IFO9801547. Floor mounting, bonding IFO98030
25
11
13
12
14
15
12
16
17 18
GB / Make sure the surface of the tiles is clean, dry and free from grease.
* IMPORTANT NOTE for toilets with Arm Supports (e.g. IFO98125): Due to the extra force applied to the toilet pan by the arm supports, it is recommended that the toilet pan be �xed to the �oor using stainless steel pan screws (supplied - IFO98381) together with a silicone bed, or �xed using a water proof �oor mounting bracket (IFO98015). The �oor surface should be as �at and level as possible, to ensure stability. Fixing the toilet pan with only the silicone seal is not considered to be an adequate method of �xing.
30
360-415
860
355
95
190
40
650
c/c Sitsbulthå l155
420
120
Ø 102
40
6862
6872
355
900
c/c Sitsbulthål155
460
95
400- 455
650
40
190
Ø 102
40120
6893
100
660
c/c Sitsbulthål155
325
760
355
230
20
Ø 102
75
290
150
100
105
max 95min. 40
6861
900
400- 455
355
95
Ø 102
7020
650
c/c Sitsbulthå l155
40
460
860
355
95
360-415
Ø 102
2070
4040
650
c/c Sitsbulthål155
420
6860