ieee-std-287 conformed precision coaxial connectors...precision coaxial connectors 3.5mm/2.4mm dc -...
TRANSCRIPT
DC - 110GHz1mm/1mm
DC - 65GHz1.85mm/1.85mm
DC - 50GHz2.4mm/2.4mm
DC - 40GHz2.92mm/2.92mm
DC - 26.5GHz3.5mm/3.5mm
DC - 40GHz2.92mm/2.4mm
DC - 40GHz
2.92mm/1.85mmDC - 50GHz
2.4mm/1.85mmDC - 67GHz
1.85mm/1mm
DC - 65GHz1.85mm/1.85mm
DC - 65GHz1.85mm
DC - 40GHz2.92mm
1mm for DC - 110GHz,1.85mm for DC - 60GHzand DC - 65GHz, 2.92mm for DC - 40GHz,Also available between-assemblies Re-Formable
Semirigid CableAssemblies
Adapters Within Series
Adapters Between Series
Panel Adapters
Launchers & Glass Beads
Hermetic Adapter
1.85mm/1.85mm DC - 65GHz
IEEE-std-287 Conformed
Precision Coaxial Connectors
3.5mm/2.4mmDC - 26.5GHz
FOE2007
2.92mm/2.92mmDC - 40GHz
2.92mm/2.92mm DC - 40GHz
DC - 65GHz1.85mm/1.85mm
Front Panel Adapter
DC - 110GHz1mm
〒214-0031 川崎市多摩区東生田 1-3-5
営業 電話FAX
技術 電話FAX
044-911-7052044-911-2561
044-911-7073044-911-9621
同軸、光、コネクタ製造
株式会社 川島製作所
Note: All dimensions are in Millimeters. (*) Calibration as Insertable-Device (**) Calibration as Non-Insertable-Device
Typical Performance
KPC100MF/FF/MM Rev. 02 Oct. 17.2006
DC - 110GHz, Coaxial Adapters, In-Series1mm/1mm
SPECIFICATIONS: Electrical: Frequency Range DC - 110 GHz Return Loss Better than 18dB(*),15dB(**) Insertion Loss <0.45dB Electrical Length 11.6 mm [Nominal] Temperature Range -55 to +125 ℃
Mechanical: Body and Outer Conductors: -Gold Plated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 45 N-cm(Nominal) Connect/Disconnect Life >500 Cycles [Predicted]
DESCRIPTION These "KPC100MF,FF and MM"coaxial adapters that small size, lowSWR and low loss, are designed forthe ultra-broadband (up to sub-millimeter wave) measurement,instrument and system use.
Specifications Subject to Change Without Notice.
14.15
11(Reference Plane)
3.5 ACROSSFLATS
TYPE: KPC100MM 1mm Male/1mm Male
14.33.5 ACROSSFLATS
11(Reference Plane)
TYPE: KPC100FF 1mm Female/1mm Female
Interface Mating Dimensions of KPC100
MaleFemale
abd e
g
M4 x 0.7 -6H
HEX 6Reference Planef
a b c
M4 x 0.7 -6gReference Plane
a φ 0.434b φ 1.000c φ 2.390d φ 2.358e φ 0.250f 0-0.025g 0-0.025
-45-40-35-30-25-20-15-10-50
0 10 20 30 40 50 60 70 80 90 100 110
-1.0-0.9-0.8-0.7-0.6-0.5-0.4-0.3-0.2-0.10.0
0 10 20 30 40 50 60 70 80 90 100 110
-45-40-35-30-25-20-15-10-50
0 10 20 30 40 50 60 70 80 90 100 110
-1.0-0.9-0.8-0.7-0.6-0.5-0.4-0.3-0.2-0.10.0
0 10 20 30 40 50 60 70 80 90 100 110
-45-40-35-30-25-20-15-10-50
0 10 20 30 40 50 60 70 80 90 100 110-1.0-0.9-0.8-0.7-0.6-0.5-0.4-0.3-0.2-0.10.0
0 10 20 30 40 50 60 70 80 90 100 110
11(Reference Plane)
14.21
3.5 ACROSSFLATS
TYPE: KPC100MF 1mm Male/1mm Female
Inser
tion L
oss (
dB)
Retur
n Los
s (dB
)
Frequency (GHz) Frequency (GHz)
Inser
tion L
oss (
dB)
Retur
n Los
s (dB
)
Frequency (GHz) Frequency (GHz)
Inser
tion L
oss (
dB)
Retur
n Los
s (dB
)
Frequency (GHz) Frequency (GHz)
Number of samples:4 pcs
Number of samples:4 pcs
Number of samples:7 pcsKPC100MF (*)
KPC100FF (**)
KPC100MM (**)
Copyright(C) 2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved.
Kawashima Manufacturing Co., Ltd.1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621http://www.kmco.biz/ e-mail: [email protected]
ISO9001:2000 Certified
KPC185MF
17.02(Reference Plane)
22.025.5 ACROSSFLATS
TYPE: KPC185MF 1.85mm Male/1.85mm Female
Data File:MF82819
Note: All dimensions are in Millimeters.
KPC185MM
20.89
17.04(Reference Plane)
5.5 ACROSSFLATS
Data File:MM83012
TYPE: KPC185MM 1.85mm Male/1.85mm Male
KMCOKPC185FF
23.115.5 ACROSSFLATS
17.02(Reference Plane)
Data File:FF82922TYPE: KPC185FF 1.85mm Female/1.85mm Female
Typical PerformanceSWR Insertion Loss
Note: This SWR is combined with a Through-Line adapter for the calibration.
Note: This SWR is combined with a Through-Line adapter for the calibration.
185K Rev._ Aug.2002
a 0.803b 1.850c 4.770d 4.750e 0.511f 0-0.080g 0-0.080 ���
���������
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H������
������������
������abd e
g 8 HEX.Reference Plane
Female Male
Interface Mating Dimensions of KPC185 (1.85mm Connectors<*>)
<*> Matable with 2.4mm Connectors
DC - 65GHz, Coaxial Adapters, In-Series1.85mm/1.85mm
SPECIFICATIONS: Electrical: Frequency Range DC - 65 GHz SWR <1.3 Insertion Loss <0.35 dB Electrical Length 17.5 mm(Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION These "KPC185MF,FF and MM" coaxialadapters that small size, low SWR and lowloss, are designed for broadbandmeasurement, instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
http://www.kmco.biz/ e-mail: [email protected] Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
17.02(Reference Plane)
22.025.5 ACROSSFLATS
KPC240MF
TYPE: KPC240MF 2.4mm Male/2.4mm Female
Note: All dimensions are in Millimeters.
20.9
17.04(Reference Plane)
5.5 ACROSSFLATS
KPC240MM
TYPE: KPC240MM 2.4mm Male/2.4mm Male
23.055.5 ACROSSFLATS
17.05(Reference Plane)
KMCOKPC240FF
TYPE: KPC240FF 2.4mm Female/2.4mm Female
Typical PerformanceSWR Insertion Loss
Note: Terminated with broad band load
240 Rev._ Jan.2003
1.042 2.400 4.770 4.750 0.5110-0.0800-0.080
abcdefg ���
���������
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H������
������������
������abd e
g 8 HEX.Reference Plane
Female Male
Interface Mating Dimensions of KPC240 (2.4mm Connectors<*>)
<*> Matable with 1.85mm Connectors
DC - 50GHz, Coaxial Adapters, In-Series2.4mm/2.4mm
SPECIFICATIONS: Electrical: Frequency Range DC - 50 GHz SWR <1.25 Insertion Loss <0.3 dB Electrical Length 17.5 mm(Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION These "KPC240MF,FF and MM" coaxialadapters that small size, low SWR and lowloss, are designed for broadbandmeasurement, instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
Note: Terminated with broad band load
http://www.kmco.biz/ e-mail: [email protected]
17.04(Reference Plane)
20.955.5 ACROSSFLATS
KPC292MF
TYPE: KPC292MF 2.92mm Male/2.92mm Female
Note: All dimensions are in Millimeters.
21
17.04(Reference Plane)
5.5 ACROSSFLATS
KPC292MM
TYPE: KPC292MM 2.92mm Male/2.92mm Male
KMCOKPC292FF
20.9
5.5 ACROSSFLATS
17.04(Reference Plane)
TYPE: KPC292FF 2.92mm Female/2.92mm Female
Typical PerformanceSWR Insertion Loss
Note: This SWR is combined with a Through-Line adapter for the calibration.
Note: This SWR is combined with a Through-Line adapter for the calibration.
292Rev._ Jan.2003
DC - 40GHz, Coaxial Adapters, In-Series2.92mm/2.92mm
SPECIFICATIONS: Electrical: Frequency Range DC - 40 GHz SWR <1.15 (MF & MM) <1..20 (FF) Insertion Loss <0.2 dB Electrical Length 17.5 mm(Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION These "KPC292MF,FF and MM" coaxialadapters that small size, low SWR and lowloss, are designed for broadbandmeasurement, instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
1.270 2.920 4.640 4.580 0.9200-0.0800-0.080
abcdefg
������������
f
a b c
1/4-36 UNS-2A
Reference Plane
����
����
��������������
������
abd e
g
1/4-36 UNS-2B
8 HEX.Reference PlaneFemale Male
Interface Mating Dimensions of KPC292 (2.92mm Connectors)
http://www.kmco.biz/ e-mail: [email protected]
Note: All dimensions are in Millimeters.
Typical PerformanceSWR Insertion Loss
350 _ Feb.2003
Female MaleInterface Mating Dimensions of KPC350 (3.5mm Connectors<*>)
���
���f
a
b c
1/4-36 UNS-2AReference Plane
������
������
������
��
��
abd e
g1/4-36 UNS-2B
HEX 8Reference Plane
abcdefg
1.520 3.500 4.640 4.580 0.9200-0.0800-0.080
<*> Matable with SMA and 2.92mm Connectors
DC - 26.5GHz, Coaxial Adapters, In-Series3.5mm/3.5mm
SPECIFICATIONS: Electrical: Frequency Range DC - 26.5 GHz(Moding:34GHz) SWR <1.15 Insertion Loss <0.2 dB Electrical Length 17.5 mm(Nominal) Temperature Range -55 to +125 deg.C Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION These "KPC350MF,FF and MM" coaxialadapters that small size, low SWR and lowloss, are designed for broadbandmeasurement, instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
21.26
17.04(Reference Plane)
5.5 ACROSSFLATS
KPC350MM
TYPE: KPC350MM 3.5mm Male/3.5mm Male
Data File:03012102
Terminated with broadband Load
KMCOKPC350FF
20.915.5 ACROSSFLATS
17.04(Reference Plane)
Data File:03012909TYPE: KPC350FF 3.5mm Female/3.5mm Female
Terminated with broadband Load
17.04(Reference Plane)
21.085.5 ACROSSFLATS
KPC350MF
TYPE: KPC350MF 3.5mm Male/3.5mm Female
Data File:03013005
http://www.kmco.biz/ e-mail: [email protected]
Note: All dimensions are in Millimeters. (1) As for the return loss and insertion loss of the adapters, 1.8mm ports are mated and 1mm ports are measured as an interface.
185-100 Rev.02 Oct. 17 2006
DC - 67GHz, Coaxial Adapters, Between-Series1.85mm/1mm
SPECIFICATIONS: Electrical: Frequency Range DC - 67 GHz Return Loss Better than 16dB (1)
Insertion Loss <0.6 dB (1)
Electrical Length 14.6 mm(Nominal) Temperature Range -55 to +125 ℃
Mechanical: Body and Outer Conductors: -Gold Plated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm for KPC185 (Nominal) 45 N-cm for KPC100 (Nominal) Connect/Disconnect Life >500 Cycles [Predicted]
DESCRIPTION The coaxial adapters between 1.85mmand 1.00mm that small size, low SWRand low loss, are designed for broadbandmeasurement, instrument and systemuse.
Copyright(C) 2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
Interface Mating DimensionsKPC185(1.85mm)
KPC100(1mm)a φ0.434b φ1.000c φ2.390d φ2.358e φ0.250f 0-0.025g 0-0.025
a φ0.803b φ1.850c φ4.770d φ4.750e φ0.511f 0-0.050g 0-0.050
KPC185(1.85mm)f
a b c
M7x0.75 -6g
Reference PlaneFemale
M7x0.75-6H
abd e
g 8 HEX.Reference Plane
Male f
a b c
M4 x 0.7 -6gReference Plane
Female
abd e
g
M4 x 0.7 -6H
HEX 6Reference PlaneMale
KPC100(1mm)
Kawashima Manufacturing Co., Ltd.1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621http://www.kmco.biz/ e-mail: [email protected]
ISO9001:2000 Certified
TYPE: KPC185M100M 1.85mm Male/1mm Male
17.54
14(Reference Plane)
3.5 ACROSSFLATS
TYPE: KPC185M100F 1.85mm Male/1mm Female
14(Reference Plane)
17.633.5 ACROSSFLATS
TYPE: KPC185F100M 1.85mm Female/1mm Male
14(Reference Plane)
18.573.5 ACROSSFLATS
TYPE: KPC185F100F 1.85mm Female/1mm Female
18.653.5 ACROSSFLATS
14(Reference Plane)
Performance test configurationVNA with millimeter wavemodules
Port 1 Port 2
1mm 1mm1.85/1.85mm
(Adapter pair : Insertable-device)
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 10 20 30 40 50 60 70
R
etur
n Lo
ss|S
11|,
dB
Frequency GHz
-1.0-0.9
-0.8-0.7
-0.6-0.5-0.4
-0.3-0.2
-0.10.0
0 10 20 30 40 50 60 70
I
nser
tion
Loss
|S21
|, dB
Frequency GHz
Typical Performance
(Number of Adapter-pair samples : 4 pcs)
Note: All dimensions are in Millimeters.
240_185 Rev._ Nov.2002
Interface Mating Dimensions
DC - 50GHz, Coaxial Adapters, Between-Serise2.4mm/1.85mm
SPECIFICATIONS: Electrical: Frequency Range DC - 50 GHz SWR <1.25 (*) Insertion Loss <0.4 dB (**) Electrical Length 17.5 mm(Nominal) Temperature Range -55 to +125 deg.C Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION The coaxial adapters between 2.4mmand 1.85mm that small size, low SWR andlow loss, are designed for broadbandmeasurement, instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
KPC240 and 185 Connectors
Typical Performance
SWR
Inse
rtio
n Lo
ss
23.115.5 ACROSSFLATS
17.05(Reference Plane)
ID:1.85mm
TYPE: KPC240F185F 2.4mm Female/1.85mm Female
17.05(Reference Plane)
22.035.5 ACROSSFLATSID:2.4mm
TYPE: KPC240F185M 2.4mm Female/1.85mm Male
20.89
17.05(Reference Plane)
5.5 ACROSSFLATS
ID:2.4mm
TYPE: KPC240M185M 2.4mm Male/1.85mm Male
17.05(Reference Plane)
22.025.5 ACROSSFLATS
ID:1.85mm
TYPE: KPC240M185F 2.4mm Male/1.85mm Female
Note: (*) Measured from 1.85mm port and Terminated with 2.4mm broad band loadType: KPC240M185F
Note: (**) Measured for 1.85mm test port cablesType: KPC240M185F
1.042 2.400 4.770 4.750 0.5110-0.0800-0.080
KPC240(2.4mm)abcdefg
0.803 1.850 4.770 4.750 0.5110-0.0800-0.080
KPC185(1.85mm)abcdefg
������������
f
a b c
M7x0.75 -6g
Reference PlaneFemale
M7x0.75-6H���
���
����
����
abd e
g 8 HEX.Reference Plane
Male
1.01.11.21.31.41.51.6
0 10 20 30 40 50
2.4mm/2.4mm Coaxial Adapter mated to 1.85mm test port cables(Example: KMCO "KPC240MF")
Frequency in GHz
SWR
To solve the following SWR degradation,these adapters have been designed.
Data file:02102506 Data file:02102501
http://www.kmco.biz/ e-mail: [email protected]
Note: All dimensions are in Millimeters.
292_185 Rev._ Oct.2002
0.803 1.850 4.770 4.750 0.5110-0.0800-0.080
abcdefg
Interface Mating Dimensions
<*> Matable with 2.4mm Connectors
DC - 40GHz, Coaxial Adapters, Between-Serise2.92mm/1.85mm
SPECIFICATIONS: Electrical: Frequency Range DC - 40 GHz SWR <1.3 Insertion Loss <0.35 dB Electrical Length 17.5 mm(Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION The coaxial adapters between 2.92mmand 1.85mm that small size, low SWR andlow loss, are designed for broadbandmeasurement, instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
1.270 2.920 4.640 4.580 0.9200-0.0800-0.080
abcdefg
����������������
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H���
���
����
����
abd e
g 8 HEX.Reference Plane
Female Male
������������
f
a b c
1/4-36 UNS-2A
Reference Plane
���
���
������������
������
abd e
g
1/4-36 UNS-2B
8 HEX.Reference PlaneFemale Male
KPC185 (1.85mm Connectors<*>)KPC292 (2.92mm Connectors)
Typical Performance
SWR
Inse
rtio
n Lo
ss
22.035.5 ACROSSFLATS
17.04(Reference Plane)
TYPE: KPC292F185F 2.92mm Female/1.85mm Female
17.04(Reference Plane)
20.905.5 ACROSSFLATS
TYPE: KPC292F185M 2.92mm Female/1.85mm Male
20.94
17.04(Reference Plane)
5.5 ACROSSFLATS
TYPE: KPC292M185M 2.92mm Male/1.85mm Male
17.03(Reference Plane)
22.345.5 ACROSSFLATS
TYPE: KPC292M185F 2.92mm Male/1.85mm Female
Note: Terminated with 1.85mm broad band loadType: KPC292M185M
Note: Included 1.85 to 2.92mm adapter loss for output port connectionType: KPC292F185M
http://www.kmco.biz/ e-mail: [email protected]
Note: All dimensions are in Millimeters.
292_240 Rev._ Jan.2003
1.042 2.400 4.770 4.750 0.5110-0.0800-0.080
abcdefg
Interface Mating Dimensions
DC - 40GHz, Coaxial Adapters, Between-Serise2.92mm/2.4mm
SPECIFICATIONS: Electrical: Frequency Range DC - 40 GHz SWR <1.22 Insertion Loss <0.25dB Electrical Length 17.5 mm(Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION The coaxial adapters between 2.92mmand 2.4mm that small size, low SWR andlow loss, are designed for broadbandmeasurement, instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
abcdefg
1.270 2.920 4.640 4.580 0.9200-0.0800-0.080
����������������
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H���
���
����
����
abd e
g 8 HEX.Reference Plane
Female Male
������������
f
a b c
1/4-36 UNS-2A
Reference Plane
���
���
������������
������
abd e
g
1/4-36 UNS-2B
8 HEX.Reference PlaneFemale Male
KPC240 (2.4mm Connectors<*>)KPC292 (2.92mm Connectors)
Typical Performance
SWR
Inse
rtio
n Lo
ss
22.035.5 ACROSSFLATS
17.04(Reference Plane)
TYPE: KPC292F240F 2.92mm Female/2.4mm Female
17.04(Reference Plane)
20.905.5 ACROSSFLATS
TYPE: KPC292F240M 2.92mm Female/2.4mm Male
20.92
17.04(Reference Plane)
5.5 ACROSSFLATS
TYPE: KPC292M240M 2.92mm Male/2.4mm Male
17.04(Reference Plane)
22.15.5 ACROSSFLATS
TYPE: KPC292M240F 2.92mm Male/2.4mm Female
Note: Terminated with 2.4mm broad band loadType: KPC292M240F
Note: Included 2.4 to 2.92mm adapter loss for output port connectionType: KPC292M240F
http://www.kmco.biz/ e-mail: [email protected]
Note: All dimensions are in Millimeters.
350_240 Rev._ Sept.2003
abcdefg
1.042 2.400 4.770 4.750 0.5110-0.0800-0.080
Interface Mating Dimensions
<*> Matable with 1.85mm Connectors
DC - 26.5GHz, Coaxial Adapters, Between-Series3.5mm/2.4mm
SPECIFICATIONS: Electrical: Frequency Range DC - 26.5 GHz(Mording:34GHz) SWR <1.2 Insertion Loss <0.3 dB Electrical Length 17.5 mm(Nominal) Temperature Range -55 to +125 deg.C Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION The coaxial adapters between 3.5mmand 2.4mm that small size, low SWR andlow loss, are designed for broadbandmeasurement, instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2003 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
http://www.kmco.biz/ e-mail: [email protected] Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
abcdefg
1.520 3.500 4.640 4.580 0.9200-0.0800-0.080
����������������
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H���
���
����
����
abd e
g 8 HEX.Reference Plane
Female Male
������������
f
a b c
1/4-36 UNS-2A
Reference Plane
���
���
������������
������
abd e
g
1/4-36 UNS-2B
8 HEX.Reference PlaneFemale Male
KPC240 (2.4mm Connectors<*>)KPC350 (3.5mm Connectors)
Typical Performance
SWR
Inse
rtio
n Lo
ss
22.025.5 ACROSSFLATS
17.04(Reference Plane)
TYPE: KPC350F240F 3.5mm Female/2.4mm Female
17.04(Reference Plane)
20.915.5 ACROSSFLATS
TYPE: KPC350F240M 3.5mm Female/2.4mm Male
21.09
17.04(Reference Plane)
5.5 ACROSSFLATS
TYPE: KPC350M240M 3.5mm Male/2.4mm Male
17.04(Reference Plane)
22.25.5 ACROSSFLATS
TYPE: KPC350M240F 3.5mm Male/2.4mm Female
Note: Terminated with 2.4mm broad band loadType: KPC350M240M
Note: Included 2.4 to 3.5mm adapter loss for output port connectionType: KPC350F240M
TYPE: KPC185MF FPA 1.85mm Male/1.85mm Female
Note: - All dimensions are in Millimeters. - (*)The toothed lockwasher is nickel plated steel.
185MF FPA Rev.01 Apr.2006
0.803 1.850 4.770 4.750 0.5110-0.0500-0.050
abcdefg
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H
abd e
g 8 HEX.Reference Plane
Female Male
Interface Mating Dimensions of KPC185MF FPA (1.85mm Connectors<*>)
<*> Matable with 2.4mm Connectors
DC - 65GHz, Coaxial Panel Adapters For Front Access Ports1.85mm/1.85mm
SPECIFICATIONS: Electrical: Frequency Range DC - 65 GHz SWR <1.3 Insertion Loss <0.5 dB Electrical Length Below (Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body: Passivated Stainless steel (*) Outer Conductors: Gold Plated Stainless steel Inner Conductors: Gold Plated Beryllium Copper Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION This "KPC185MF FPA" called coaxialfront panel adapter that easy to mate, lowSWR and low loss, are designed forfrequently connect/disconnect accessedbroadband measurement, instrument andsystem use.
Production Status Three weeks Lead-Time will
be available for shipping.
Copyright(C) 2002-2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
http://www.kmco.biz/ e-mail: [email protected] Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
Mounting Hole and Thickness(Recommended)
10.02
(Dia.)
8.05
Thickness: 2 to 5.4mm
31.22(Reference Plane)
36.4
<Electrical Length: 32.3 mm>
M10xP1-6g
16.6
4 102
810.3
5
15.9(
Dia.)
16.8 HEX.
14 Across Flats
7.95 Across Flats
8 HEX.
(*)
Typical PerformanceNo. of Samples:13pcs
1.001.051.101.151.201.251.30
0 5 10 15 20 25 30 35 40 45 50 55 60 65
-0.60-0.50-0.40-0.30-0.20-0.100.00
0 5 10 15 20 25 30 35 40 45 50 55 60 65
Frequency GHz
Elec
trica
l Len
gth
mm
Inse
rtion
Los
s dB
SWR
S/N 03120401-03120413
31.30
31.80
32.30
32.80
33.30
0 5 10 15 20 25 30 35 40 45 50 55 60 65
TYPE: KPC292MF FPA 2.92mm Male/2.92mm Female
Note: - All dimensions are in Millimeters. - (*)The toothed lockwasher is nickel plated steel.
292MF FPA Rev.00 JLY.2007<*> Matable with 3.5mm and SMA
DC - 40GHz, Coaxial Panel Adapters For Front Access Ports2.92mm/2.92mm
SPECIFICATIONS: Electrical: Frequency Range DC - 40 GHz Return Loss Be tter than 26 dB Insertion Loss <0.3 dB Electrical Length B elow (Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body: Passivated Stainless steel (*) Outer Conductors: Gold Plated Stainless steel Inner Conductors: Gold Plated Beryllium Copper Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION This "KPC292MF FPA" called coaxialfront panel adapter that easy to mate,good return loss and low insertin loss, aredesigned for frequently connect/disconnect accessed broadbandmeasurement, instrument and systemuse.
Production Status Three weeks Lead-Time will
be available for shipping.
Copyright(C) 2002-2007 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
http://www.kmco.biz/ e-mail: sales @kmco.co.jp1-3-5 Higashiikuta, Tama-k u,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
Mounting Hole and Thickness(Recommended)
10.02
(Dia.
)
8.05
Thickness: 2 to 5 .4mm
30.91(Reference Plane)
35.8
<Electrical Length: 31.3 mm>
M10xP1-6g
16.6
4 102
7.410.3
5
15.9(
Dia.)
14 Across Flats
8 HEX.
(*)
16.8 HEX.
7.95 Across Flats
1.270 2.920 4.640 4.580 0.9200-0.0800-0.080
abcdefg
f
a b c
1/4-36 UNS-2A
Reference Plane
abd e
g
1/4-36 UNS-2B
8 HEX.Reference PlaneFemale Male
Interface Mating Dimensions of KPC292 (2.92mm Connectors)
Typical PerformanceNo. of Samples: 7 pcs
Ele
ctric
al L
engt
h m
mIn
serti
on L
oss
dB
Ret
urn
Loss
dB
Frequency GHz
31.20
31.30
31.40
31.50
0 5 10 15 20 25 30 35 40
-0.50
-0.40
-0.30-0.20
-0.10
0.00
0 5 10 15 20 25 30 35 40
-60-50-40-30-20-10
0
0 5 10 15 20 25 30 35 40
DELAY APERTURE: 10%
ISO9001:2000Certified
21.22(Reference Plane)
26.2
TYPE: KPC185MFPA 1.85mm Male/1.85mm Female
��
�11.4
1
<Electrical Length: 21.7 mm>
7.6
3/8-32 UNS -2A
D-Flat
17.5(
Dia.)
12.7 HEX.
12.7(
Dia.)
Note: - All dimensions are in Millimeters. - (*)The toothed lockwasher is chromate converted zinc plated steel.
Typical PerformanceSWR Insertion Loss
Note: This SWR is combined with a Through-Line adapter for the calibration.
Note: This SWR is combined with a Through-Line adapter for the calibration.
185pa Rev.__Sep.2002
0.803 1.850 4.770 4.750 0.5110-0.0800-0.080
abcdefg
����������������f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H
������
���
����
����
abd e
g 8 HEX.Reference Plane
Female Male
Interface Mating Dimensions of KPC185 (1.85mm Connectors<*>)
<*> Matable with 2.4mm Connectors
DC - 65GHz, Coaxial Panel Adapters1.85mm/1.85mm
SPECIFICATIONS: Electrical: Frequency Range DC - 65 GHz SWR <1.3 Insertion Loss <0.4 dB Electrical Length Below (Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body and Outer Conductors: -Passivated Stainless steel (*) Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION These "KPC185MFPA,FFPA and MMPA"coaxial panel adapters that 9.5mm "D" holedpanel mountable, low SWR and low loss,are designed for broadband measurement,instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
http://www.kmco.biz/ e-mail: [email protected] Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
17.02(Reference Plane)
23.1
TYPE: KPC185FFPA 1.85mm Female/1.85mm Female
8.41
<Electrical Length: 17.5 mm>
7.6
�
�3/8-32 UNS -2A
D-Flat
17.5(
Dia.)
12.7(
Dia.)
12.7 HEX.
25.52(Reference Plane)
29.5
TYPE: KPC185MMPA 1.85mm Male/1.85mm Male
Data File:MF8281911.4
1
<Electrical Length: 26.0 mm>
7.6
�
�
3/8-32 UNS-2A
D-Flat
17.5(
Dia.)
12.7(
Dia.)
12.7 HEX.
9.55(D
ia.)
8.75
Mounting Hole(Recommended)
Note: This SWR is combined with a Through-Line adapter for the calibration.
Note: This SWR is combined with a Through-Line adapter for the calibration.
21.22(Reference Plane)
25.1
TYPE: KPC292MFPA 2.92mm Male/2.92mm Female
11.31
<Electrical Length: 22.25 mm>
7.6
3/8-32 UNS -2A
D-Flat
17.5(
Dia.)
12.7 HEX.
12.7(
Dia.)
Note: - All dimensions are in Millimeters. - (*)The toothed lockwasher is chromate converted zinc plated steel.
Typical Performance
292pa Rev.__Mar.2004
DC - 40GHz, Coaxial Panel Adapters2.92mm/2.92mm
SPECIFICATIONS: Electrical: Frequency Range DC - 40 GHz SWR <1.15 Insertion Loss <0.25 dB Electrical Length Below (Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body : Passivated Stainless steel (*) Outer Conductors: Gold Plated Stainless steel Inner Conductors: Gold Plated Beryllium Copper Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION These "KPC292MFPA,FFPA and MMPA"coaxial panel adapters that 9.5mm "D" holedpanel mountable, low SWR and low loss,are designed for broadband measurement,instrument and system use.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002-2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
http://www.kmco.biz/ e-mail: [email protected] Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
17.02(Reference Plane)
20.9
TYPE: KPC292FFPA 2.92mm Female/2.92mm Female
7.11
<Electrical Length: 18.1 mm>
7.6
3/8-32 UNS -2A
D-Flat
17.5(
Dia.)
12.7(
Dia.)
12.7 HEX.
25.52(Reference Plane)
29.5
TYPE: KPC292MMPA 2.92mm Male/2.92mm Male
11.51
<Electrical Length: 26.5 mm>
7.6
3/8-32 UNS-2A
D-Flat
17.5(
Dia.)
12.7(
Dia.)
12.7 HEX.
9.55(D
ia.)
8.75
Mounting Hole(Recommended)
1.270 2.920 4.640 4.580 0.9200-0.0500-0.050
abcdefg
f
a b c
1/4-36 UNS-2A
Reference Plane
abd e
g
1/4-36 UNS-2B
8 HEX.Reference PlaneFemale Male
SER#:04031130
SER#:04031022
Interface Mating Dimensions ofKPC292 (2.92mm Connectors)
Note: The SWR/Insetion loss are combined with a Through-Line adapter for the calibration.
Note: The SWR/Insetion loss are combined with a Through-Line adapter for the calibration.
SER#:04031208
KPC292MFPA
KPC292FFPA
KPC292MMPA
SW
RS
WR
SW
R
Inse
rtion
Los
s dB
Inse
rtion
Los
s dB
Inse
rtion
Los
s dB
Note: - All dimensions are in Millimeters. - [1] Corners : Less than 0.05 x 0.05 mm - [2] Required "Smooth Surface" - (*) As Per MIL-STD-883E, METHOD1014.10, Test Condition A4
Typical Performance
185FFHA Rev01 Mar. 2006
f
a b c
M7x0.75 -6g
Reference PlaneFemale
Interface Mating Dimensions of KPC185 (1.85mm Connectors<*>)
<*> Matable with 2.4mm Connectors
DC - 65GHz, Hermetically Sealed, Coaxial Adapter1.85mm/1.85mm
SPECIFICATIONS: Electrical: Frequency Range DC - 65 GHz Return Loss >15 dB Insertion Loss <0.7 dB Electrical Length Below (Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body and Outer Conductors: -Gold Plated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper Inner and Outer Conductors for seal: - Gold Plated Fe/Ni/Co Alloy(KOVAR) Insulator for seal: #7070 Glass(Corning) Gasket for flange seal: Fluoroelastomer "O" Ring Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles He leak rate(*) <1x10-10 Pam3/Sec (<1x10-9 atm cc /Sec)
DESCRIPTION This "KPC185FFHA " Hermetically Sealed1.85mm to 1.85mm Coaxial Adapter that - DC to 65GHz, - Low SWR and loss, - Hermetic RF interface between vacuum and atmosphere environment, - Small mounting space,is designed for broadband devices,instrument and component testing use.
Copyright(C) 2006 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
http://www.kmco.biz/ e-mail: [email protected] Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
23.92(Reference Plane)
30
TYPE: KPC185FFHA 1.85mm Female/1.85mm Female
<Electrical Length: 26.4 mm>
8 HEX.Nut
12.95
+0/-0
.05
12.95+0/-0.0516 Dia.
10.42.6"O" Ring
3"T"
"T" : Vacuum wall or Flange thickness, 4(min) to 8(max) mm
AtmosphereLow Pressure
Recommended Mounting Hole and Installation
Single orSeparated MultiPort Installation
Spaced "13mm"Multi PortInstallation
7.15+
0.05/-
0( D
ia.)
4 (min)8(max)
13+0
.05/-0
(Widt
h)
7.15+
0.05/-
0( D
ia.)
0.2(Typ.)(Deep) 13+0.05/-0
(Space)
AtmosphereLow Pressure
[1][2]
[1][2]
Vacuum wallor Flange
Tightening Torque; 135 N-cm(Typ.)
0.803 1.850 4.770 ------- -------0-0.080 ------
abcdefg
ex. of 4-Adapters mounted to 70mm dia. vacuum flange
Inser
tion L
oss (
dB)
Retur
n Los
s (dB
)
Frequency (GHz)
N:5pcs
Data File:030920__
Production Status 4 weeks Lead-Time willbe available for shipping.
ISO9001:2000 Certified
Note: - All dimensions are in Millimeters. - [1] Chamfer : Less than 0.05 mm - [2] Required "Smooth Surface" - (*) As Per MIL-STD-883E, METHOD1014.10, Test Condition A4
Typical Performance
292FFHA Rev. - Mar. 2006
Interface Mating Dimensions of KPC292 (2.92mm Connectors<*>)
<*> Matable with 3.5mm and SMA
DC - 40GHz, Hermetically Sealed, Coaxial Adapter2.92mm/2.92mm
SPECIFICATIONS: Electrical: Frequency Range DC - 40 GHz Return Loss >15 dB Insertion Loss <0.45 dB Electrical Length Below (Nominal) Temperature Range -55 to +125 deg.C
Mechanical: Body and Outer Conductors: -Gold Plated Stainless steel and Brass Inner Conductors: -Gold Plated Beryllium Copper Inner and Outer Conductors for seal: - Gold Plated Fe/Ni/Co Alloy(KOVAR) Insulator for seal: #7070 Glass(Corning) Gasket for flange seal: Fluoroelastomer "O" Ring Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles He leak rate(*) <1x10-10 Pam3/Sec (<1x10-9 atm cc /Sec)
DESCRIPTION This "KPC292FFHA " Hermetically Sealed2.92mm to 2.92mm Coaxial Adapter that - DC to 40GHz, - Low SWR and loss, - Hermetic RF interface between vacuum and atmosphere environment, - Small mounting space,is designed for broadband devices,instrument and component testing use.
Copyright(C) 2006 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
http://www.kmco.biz/ e-mail: [email protected] Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
Production Status 4 weeks Lead-Time willbe available for shipping.
26.14(Reference Plane)
30
TYPE: KPC292FFHA 2.92mm Female/2.92mm Female
<Electrical Length: 2x.xmm>
8 HEX.Nut
12.95
+0/-0
.05
12.95+0/-0.0516 Dia.
10.42.6"O" Ring
3"T"
"T" : Vacuum wall or Flange thickness, 4(min) to 8(max) mm
AtmosphereLow Pressure
Recommended Mounting Hole and Installation
Single orSeparated MultiPort Installation
Spaced "13mm"Multi PortInstallation
7.15+
0.05/-
0( D
ia.)
4 (min)8(max)
13+0
.05/-0
(Widt
h)
7.15+
0.05/-
0( D
ia.)
0.2(Typ.)(Deep) 13+0.05/-0
(Space)
AtmosphereLow Pressure
[1][2]
[1][2]
Vacuum wallor Flange
Tightening Torque; 135 N-cm(Typ.)
N:5pcs
Data File:060330N5
1.270 2.920 4.640 ------- -------0-0.080----------
abcdefg
f
a b c
1/4-36 UNS-2A
Reference PlaneFemale
ISO9001:2000 Certified
Note: All dimensions are in Millimeters.
350MFPO Rev.00 Aug.27 2004
FemaleInterface Mating Dimensions of KPC350 (3.5mm Connectors<*>)
����������������
f
a
b c
1/4-36 UNS-2AReference Plane
abcdefg
1.520 3.500 4.640 ---------- ---------- 0-0.080 ----------
<*> Matable with SMA and 2.92mm Connectors
DC - 26.5GHz, Push-On Coaxial Adapter For Quick Test3.5mm/3.5mm
SPECIFICATIONS: Electrical: Frequency Range DC - 26.5 GHz(Moding:34GHz) Return Loss Better than 22 dB Insertion Loss <0.6dB Electrical Length 17.5 mm(Nominal)(*) Temperature Range -55 to +125 deg.C Mechanical: Body and Outer Conductors: -Passivated Stainless Steel Blind Outer Conductor: -Hard Nickel Plated Beryllium Copper Inner Conductors: -Gold Plated Beryllium Copper and Brass Push/Pull Force: 20 N (Typical) Connect/Disconnect Life >1,000 Cycles
DESCRIPTION The "KPC350MFPO" push-on coaxialadapter that-Easy and quick connection/disconnection-To reduce test time are designed for broadband componenttest and system test use.
Push-on port mates onto 3.5mm, 2.92mmand SMA female connectors.
Production Status Two weeks Lead-Time willbe available for shipping.
Specifications Subject to Change Without Notice.
22.51
5.5 ACROSSFLATS
TYPE: KPC350MFPO
-50
-45
-40
-35
-30
-25
-20
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
-0.60
-0.50
-0.40
-0.30
-0.20
-0.10
0.00
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27
In
sert
ion
Loss
|S21
|,dB
R
etur
n Lo
ss |S
11|,d
B
Frequency GHz
Frequency GHz
17.04(Reference Plane)
3.5mm Female
3.5mm Male (Slotted-blind mate)
Typical Performance(As Insertable-device calibration)
φ 10
Number of samples: 9
(*) The electrical length is same as KMCO KPC350MF and KPC292MF adapters.
Copyright(C) 2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved.
Kawashima Manufacturing Co., Ltd.1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621http://www.kmco.biz/ e-mail: [email protected]
ISO9001:2000 Certified
Note: - All dimensions are in Millimeters. - (**) Thermo-Sonic wire bondable gold plating
185/301GB Rev.02 Sep.2006
0.803 1.850 4.770 4.750 0.5110-0.1000-0.100
abcdefg
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H
abd e
g 8 HEX.Reference Plane
Female Male
Interface Mating Dimensions of KPC185M301 & KPC185F301 Launchers<*>
<*> Matable with 2.4mm Connectors
DC - 65GHz, Sparkplug Launcher Connectors & Glass Bead1.85mm
DESCRIPTION "KPC185M301/KPC185M301H and KPC185F301/KPC185F301H" sparkplug launcherconnectors and "GB185" glass bead are designed for broadband devices and units withcoaxial I/O interfaces.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002-2006 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
SPECIFICATIONS: Connectors Electrical: Frequency Range DC - 65 GHz Return Loss >15 dB(*) Temperature Range -55 to +125 deg.C Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
Glass Bead Electrical: Frequency Range DC - 65 GHz Temperature Range -55 to +125 deg.C
Mechanical: Outer and inner Conductors: -Gold Plated(**) Fe/Ni/Co Alloy (KOVAR) Insulator: #7070 Glass(Corning)
Others: Soldering temperature 330 deg.C(max) He leak rate <1x10-10 Pam3 /sec
15.4
0.05
7.1 ACROSS Flats
4.7
M6xP0.75-6g
3.2(D
ia.)
TYPE: KPC185M301 1.85mm Male
11.6
0.05
4 ACROSS Flats
6.3
M6xP0.75-6g
3.2(D
ia.)
3.9
TYPE: KPC185F301 1.85mm Female
Typical Performance
Test configuration
VNA
KPC185M301/301H KPC185F301/301HGB185Screw-in test housing
Std DUT: Cascaded KPC185M301/301H, GB185 and KPC185F301/301H
Note: (*) As std DUT configuration
Ret
urn
Loss
(dB
)In
serti
on L
oss(
dB)
Frequency (GHz)
N:9pcs
http://www.kmco.biz/ e-mail: [email protected]:2000 Certified
15.4
0.05
7.1 HEX.
4.7
M6xP0.75-6g
3.2(D
ia.)
TYPE: KPC185M301H 1.85mm Male
11.6
0.05
4 HEX.
6.3
M6xP0.75-6g
3.2(D
ia.)
3.9
TYPE: KPC185F301H 1.85mm Female
1.4 0.6
0.23(
Dia.)
0.79
1.72(
Dia.)
TYPE: GB185 Glass Bead
������������
0.89+/-0.030.076+/-0.02
1.42+0.04/-0.01 3.8
3
1/4-3
6UNS
-2B
6.5
1.98+
/-0.02
1.68+
/-0.04
0.84+
/-0.02
0
1.6 0.8Mounting hole detail(Recommended For Sliding Contact)
292/301GB Rev.01 Aug.2003
DC - 40GHz, Sparkplug Launcher Connectors & Glass Bead2.92mm
DESCRIPTION "KPC292M301 and KPC292F301" sparkplug launcher connectors and "GB292" glass bead aredesigned for broadband devices and units with coaxial I/O interfaces.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2002 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
SPECIFICATIONS: Connectors Electrical: Frequency Range DC - 40 GHz Return Loss >15 dB(*) Temperature Range -55 to +125 deg.C Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
Glass Bead Electrical: Frequency Range DC - 40 GHz Temperature Range -55 to +125 deg.C
Mechanical: Outer and inner Conductors: -Gold Plated(**) Fe/Ni/Co Alloy (KOVAR) Insulator: #7070 Glass(Corning)
Others: Soldering temperature 330 deg.C(max) He leak rate <1x10-10 Pam3 /sec
15.4
0.05
5.5 ACROSS Flats
4.7
1/4-36UNS-2A
4.51(
Dia.)
TYPE: KPC292M301 2.92mm Male
10.43
0.05
5.5 ACROSS Flats 1/4-36UNS-2A
4.51(
Dia.)
TYPE: KPC292F301 2.92mm Female
���������������������������������������������
1.4 0.74
0.3(D
ia.)
1.04
1.93(
Dia.)
TYPE: GB292 Glass Bead
Typical Performance Note: (*) As std DUT configuration
Ret
urn
Loss
(dB
)In
serti
on L
oss(
dB)
Frequency (GHz)
������������������������������������������������������������������������������������������
Test configuration
VNA
KPC292M301 KPC292F301GB292Screw-in test housing
Std DUT: Cascaded KPC292M301, GB292 and KPC292F301
����������������
������
N:9pcs
1.270 2.920 4.640 4.580 0.9200-0.1000-0.100
abcdefg
������������
f
a b c
1/4-36 UNS-2A
Reference Plane
����
����
��������������
������
abd e
g
1/4-36 UNS-2B
8 HEX.Reference PlaneFemale Male
Interface Mating Dimensions of KPC292 (2.92mm Connectors)
Note: - All dimensions are in Millimeters. - (**) Thermo-Sonic wire bondable gold plating
http://www.kmco.biz/ e-mail: [email protected]
-1.0
-0.9
-0.8
-0.7
-0.6
-0.5
-0.4
-0.3
-0.2
-0.1
0.0
0 10 20 30 40 50 60 70 80 90 100 110
-45
-40
-35
-30
-25
-20
-15
-10
-5
0
0 10 20 30 40 50 60 70 80 90 100 110
Note: - All dimensions are in Millimeters. - (1) Temperature Range, short period:200 deg.C - (2) Tip of PIN to be touching "Pin Convex" in final assembly
TYPE: KPC100M311 1mm Male
TYPE: KPC100F311 1mm Female
Typical PerformanceNote:(*) As Std Test Cofiguration
100M&F311 Rev.05 Oct.17 2006
DC - 110GHz, Flange Launchers1mm
SPECIFICATIONS: Electrical: Frequency Range DC - 110 GHz Return Loss Better than 15 dB (*) Insertion Loss <0.7dB (*) Electrical Length 11.1 mm [Nominal] Temperature Range -55 to +125 Deg.C (1)
Mechanical: Body and Outer Conductors: -Gold Plated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 45 N-cm(Nominal) Connect/Disconnect Life >500 Cycles [Predicted]
DESCRIPTION "KPC100F311 and KPC100M311" flangelaunchers are designed for ultra-broadbanddevices and units with coaxial I/O interfaces.
Copyright(C) 2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
Kawashima Manufacturing Co., Ltd.1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621http://www.kmco.biz/ e-mail: [email protected]
ISO9001:2000 Certified
12.15 Nominal
1.7+/-0.10.2+/-0.02
φ4.5φ3.2+/-0.02
REF.
PLAN
E
10.5 Nominal
φ16.4+/-0.05
12.2+
/-0.1
5.8+/-0.05
2-φ2.6+0.05/-0
φ16.4+/-0.05
12.2+
/-0.1
5.8+/-0.05
2-φ2.6+0.05/-0
12.06 Nominal1.7+/-0.10.2+/-0.02
φ4.5φ3.2+/-0.02
REF.
PLAN
E
10.5 Nominal
φ0.363+/-0.005
φ1.11
5+/-0
.005
0.8+/-0.02
0.03+0.02/-0.01(Pin Convex)
Std Test configuration VNA with millimeter wavemodules
Flange launcher test housingLength:8.005mmI.D=φ1.115mm
Connector pin for testLength:9.465mmO.D=φ0.483mm
KPC100M311 KPC100F311
Port 1 Port 2
Test Fixture
I
nser
tion
Loss
|S21
|, dB
R
etur
n Lo
ss|S
11|,
dB
Frequency GHz
Incl. Test Fixture Loss
(Insertable-device)
0+0.1/-0
Interface Mating Dimensions of KPC100
MaleFemale
abd e
g
M4 x 0.7 -6H
HEX 6Reference Planef
a b c
M4 x 0.7 -6gReference Plane
a φ0.434b φ1.000c φ2.390d φ2.358e φ0.250f 0-0.025g 0-0.025
Calculated test fixture lossFrequency GHz
(Number of samples : 2pairs)
φ0.483+/-0.005
9.65+/-0.1
Connector PIN(2): Heat treated BeCu4-Slots Socket Contact
The number of Connector PINs of 120% of number ofFlange-Launches is shipped (round-up below decimal point).
Note: - All dimensions are in Millimeters. - (**) Thermo-Sonic wire bondable gold plating
185M/F302-GB185 Rev.00 Mar.2005
0.803 1.850 4.770 4.750 0.5110-0.0500-0.050
abcdefg
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H
abd e
g 8 HEX.Reference Plane
Female Male
Interface Mating Dimensions of KPC185M302 & KPC185F302 Launchers<*>
<*> Matable with 2.4mm Connectors
DC - 65GHz, Two-hole Flange Launchers & Glass Bead1.85mm
DESCRIPTION "KPC185M302 and KPC185F302" Two-hole Flange Launchers and "GB185" glassbead are designed for broadband devices and units with coaxial I/O interfaces.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2005 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
SPECIFICATIONS: Connectors Electrical: Frequency Range DC - 65 GHz Return Loss >15 dB(*) Temperature Range -55 to +125 deg.C Mechanical: Body and Outer Conductors: -Passivated Stainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
Glass Bead Electrical: Frequency Range DC - 65 GHz Temperature Range -55 to +125 deg.C
Mechanical: Outer and inner Conductors: -Gold Plated(**) Fe/Ni/Co Alloy (KOVAR) Insulator: #7070 Glass(Corning)
Others: Soldering temperature 330 deg.C(max) He leak rate <1x10-10 Pam3 /sec
Typical Performance
Test configuration
VNA
KPC185M302KPC185F302
GB185Test housing
Std DUT: Cascaded KPC185M302, GB185 and KPC185F302
Note: (*) As std DUT configuration
N:5 pairs
http://www.kmco.biz/ e-mail: [email protected]
TYPE: GB185 Glass Bead
1.4 0.6
0.23(
Dia.)
0.79
1.72(
Dia.)
TYPE: KPC185M302 1.85mm Male
φ 3.
2
φ 15
.9
12.2
5.70.151.7
12.35 2- φ 2.6
TYPE: KPC185F302 1.85mm Female
φ 3.
2
φ 15
.9
12.2
5.7
12.37
0.151.7
2- φ 2.6
ISO9001:2000 Certified
0.89+/-0.030.076+/-0.02
1.42+0.04/-0.01 3.8
3
1/4-3
6UNS
-2B
6.5
1.98+
/-0.0
2
1.68+
/-0.0
4
0.84+
/-0.02
0
1.6 0.8Mounting hole detail(Recommended For Sliding Con tact)
292/302GB Rev.02 M ar.2007
2.92mm
DESCRIPTION "KPC292M302 and KPC292F302" Two-hole Flange launcher connectors and "GB292" glassbead are designed for broadband devices and units with coaxial I/O interfaces.
Production Status Two weeks Lead-Time willbe available for shipping.
Copyright(C) 2007 KAWASHIMA Mfg. Co., Ltd. All rights reserved.Specifications Subject to Change Without Notice.
1-3-5 Higashiikuta, Tama-k u,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621Kawashima Manufacturing Co., Ltd.
SPECIFICATIONS: Connectors Electrical: Frequency Range DC - 40 GHz Return Loss >15 dB(*) Temperature Range -55 to +125 deg.C Mechanical: Body and Outer Conductors: -Passivated S tainless steel Inner Conductors: -Gold Plated Beryllium Copper and Brass Coupling Torque 90 N-cm(Nominal) Connect/Disconnect Life >1,000 Cycles
Glass Bead Electrical: Frequency Range DC - 40 GHz Temperature Range -55 to +125 deg.C
Mechanical: Outer and inner Conductors: -Gold Plated(**) Fe/Ni/Co Alloy (KOVAR) Insulator: #7070 Glass(Corning)
Others: Soldering temperature 330 deg.C(max) He leak rate <1x10-10 Pam3 /sec
1.270 2.920 4.640 4.580 0.9200-0.0800-0.080
abcdefg
f
a b c
1/4-36 UNS-2A
Reference Plane
abd e
g
1/4-36 UNS-2B
8 HEX.Reference PlaneFemale Male
Interface Mating Dimensions of KPC292 (2.92mm Connectors)
Note: - All dimensions are in Millimeters. - (**) Thermo-Sonic wire bondable gold plating
http://www.kmco.biz/ e-mail: sales@ kmco.co.jpISO9001:2000 Certified
DC - 40GHz, Two-hole Flange Launchers & Glass Bead
VNA
Test configuration
KPC292M302 KPC292F302
GB292Test housing
Std DUT: Cascaded KPC292M302, GB292 and KPC292F3 02
TYPE: GB292 Glass Bead
1.4 0.74
0.3(D
ia.)
1.04
1.93(
Dia.)
TYPE: KPC292F302 2.92mm Female
2-φ2.6
12.2
5.7
φ15.
9
φ4.1
4
9.6
0.151.7
TYPE: KPC292M302 2.92mm Male
φ15.
9
φ4.1
4
13.1
0.151.7
2-φ2.6
12.2
5.7
Typical Performance Note: (*) As std DUT configuration
N:5 pairs
Specifications Subject to Change Without Notice.
Connector Interface 1 mm for DC - 110GHzRe-Formable Semirigid Cable Assemblies:
DESCRIPTION The Re-Formable Semirigid Cable Assemblies, up to 110 GHz,easy to install with bending by hand on your Labs./Sites, are designed for broadbandmeasurement, instrument and system use. All materials are "lead free".
SPECIFICATIONS:
Copyright(C) 2006KAWASHIMA Mfg. Co., Ltd. All rights reserved.
Kawashima Manufacturing Co., Ltd.1-3-5 Higashiikuta, Tama-k u,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621http://www.kmco.biz/ e-mail: sales@ kmco.co.jp
ISO9001:2000 Certified
MaleFemale
abd e
g
M4 x 0.7 -6H
HEX 6Reference Planef
a b c
M4 x 0.7 -6gReference Plane
a φ 0.434b φ 1.000c φ 2.390d φ 2.358e φ 0.250f 0-0.025g 0-0.025
Cable Properties:Outer Conductor: 1.19 mm Dia.Copper with Cu/Sn/Zn plated
Center Conductor: Silver plated copper
Insulator: PTFE
Moding Freq.: 112GHz(Approx.)
Delay Time: 0.476ns/100mm
Inside Bending Radius: 3 mm(min)
Non-Magnetic
Note: All dimensions are in Millimeters.
1 mm (KPC100)
CA100FFL
13(typ)
L
L
CA100MF
CA100MM
13(typ)
13(typ)
13(typ)
TYPE Dimension Connector
1 mmFemale/Female
1 mmMale/Female
1 mmMale/Male
Fig.1 Frequency vs Insertion Loss, Length=100mm
Inse
rtion
Los
s dB
(Typ
.)
Frequency GHz
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0 10 20 30 40 50 60 70 80 90 100 110
100 mm
Production Status Two weeks Lead-Time will
be available for shipping.
Type:CA100MM0200 Male/Male, L=200mm
Number of sample : 5 p.c.s
Fig.2 Typical performance
Connector Interface Mating Dimensions (IEEE-std-287 Conformed)
CA100FF/MF/MM Rev.01 Nov. 30 2006
For example: CA100MM0035 (Length:35mm) [*] Please specify length(L: see following table), when you order this item.
Insertion LossReturn LossTemperature RangeLength (L)
: See Fig.1: Better than 17dB: -55 to 100 deg.C: 30 to 200mm +/-1mm [*] (Up to 200mm , Considerable)
Insertion Loss : See Fig.1Temperature Range : -55 to 100 deg.CLength (L) : 35 to 300mm +/-2mm [**](5mm/step)-------Standard (Over 300mm to 1500mm, Considerable)
Note: All dimensions are in Millimeters. CA185_240_292 Rev.02 Aug. 31 2004Specifications Subject to Change Without Notice.
Connector Interface 1.85mm for DC - 65GHz and DC - 60GHz,2.4mm for DC - 50GHz, 2.92mm for DC - 40GHz
Re-Formable Semirigid Cable Assemblies:
CA240MML
13.9
CA240MF13.9 15.1
L
CA292MML
13.4
CA292MF13.4 14.3
L
CA292FFL
14.3
CA185-L
8.5
CA185MM LDL
13.2
CA185MF LD13.2 14.3
L
CA185MML
13.2
CA185FFL
14.3
CA185MF13.2 14.3
L
FrequencyRange
DC-65GHz
DC-60GHz
CA240FFL
15.1
DC-40GHz
InsertionLoss
SeeCurve"A"in Fig.1
SeeCurve"B"in Fig.1
ConnectorInterfaces
1.85mm
2.92mm
Male/Female
Male/Male
Female/Female
Male/Female
Male/Male
Female/Female
Male/Female
Male/Male
Female/Female
Male/Female
Male/Male
Male/Male
Cable Properties=Curve"A" in Fig.1=
Outer Conductor: 2.2mm Dia.Copper with Cu/Sn/Zn platedCenter Conductor: Silver plated copper clad steelInsulator: Low density PTFEModing Freq. :70GHz(Approx.)Delay Time: 1.27ns/300mmInside Bending Radius: 7mm(min)
=Curve"B" in Fig.1=
Outer Conductor: 2.2mm Dia.Copper with Cu/Sn/Zn plated
Center Conductor: Silver plated copper
Insulator: Solid PTFE
Moding Freq.: 61GHz(Approx.)
Delay Time: 1.43ns/300mm
Inside Bending Radius: 3.2mm(min)
Non-Magnetic
TYPE
CA185FF LDL
14.3
Female/Female
ReturnLoss
Betterthan
17 dB
DC-50GHz 2.4mm
Betterthan
20 dB
Betterthan
18 dB
Betterthan
18 dB
Betterthan
20 dB
Reference for minimum cable installationspace with rounded Re-Forming
8.6
8.6
5.4
R3.2
CA185-
16.2
16.2
9.2
R7
CA185FF/MF/MM LD
CA185FF/MF/MMCA240FF/MF/MMCA292FF/MF/MM
8.6
8.6
5.4
R3.2
Hand Bender 2200 For Re-Forming(R3.2/7mm)
[**] Please specify length(L: see following table), when you order this item. For example: CA185MM0035 (Length:35mm)
DESCRIPTION The Re-Formable Semirigid Cable Assemblies ,up to 40, 50 ,60 and 65 GHz, easy to install with bending on your Labs./Sites, are designed for broadband measurement, instrument and system use. All materials are "lead free".
SPECIFICATIONS:
[*]
[*] Non Interconnect
2.92mm (KPC292)
abcdefg
φ1.270 φ2.920 φ4.640 φ4.580 φ0.920 0-0.080 0-0.080
����������������
f
a b c
1/4-36 UNS-2AReference Plane
������
���
������������
������
abd e
g
1/4-36 UNS-2B
8 HEX.Reference Plane
Female Male����������������
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H���
���
������
������
abd e
g 8 HEX.Reference Plane
φ1.042 φ2.400 φ4.770 φ4.750 φ0.511 0-0.080 0-0.080
abcdefg
2.4mm(KPC240)
Female Male
1.85mm(KPC185 )
abcdefg
φ0.803 φ1.850 φ4.770 φ4.750 φ0.511 0-0.080 0-0.080���
���������
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H
��������
����
������
������
abd e
g 8 HEX.Reference Plane
Female Male
When you install the cableassemblies, pleasesupport a cable near theconnector and tighten thenut, because the cable thatcomposed of a thin coppertube may be damagedeasily by a twist stress.
Fig.2 Tightening of Nut
Connector Interface Mating Dimensions (IEEE-std-287 Conformed)
GHz
Inse
rtion
Los
s dB
(Typ
)
Fig.1 Frequency vs Insertion Loss, L=300mm
0.00.20.40.60.81.01.21.41.61.82.02.2 0 5 10 15 20 25 30 35 40 45 50 55 60 65
300mm (1 Feet)
"A""B"
Copyright(C) 2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved.
Kawashima Manufacturing Co., Ltd.1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621http://www.kmco.biz/ e-mail: [email protected]
ISO9001:2000 Certified
Production Status Two weeks Lead-Time willbe available for shipping.
Notice: About the cable bending with hand bender 2200
To prevent the cable damage in the joint part of thecable and the connector, Please bend the cable in aplace about 4mm away from the joint part.
4mm(Approx.)
Pre-Bend(10-20deg.)
Full-Bend(90deg.)
Insertion Loss : See Fig.1Return Loss : Better than 18dBTemperature Range : -55 to 100 deg.CLength (L) : 35 to 300mm +/-2mm [*](5mm/step)-------Standard (Over 300mm to 1500mm, Considerable)
Note: All dimensions are in Millimeters. CA185_240_292 Between, Rev.00 Sep. 24 2004Specifications Subject to Change Without Notice.
Connector Interface 2.4mm/1.85mm for DC - 50GHz and2.92mm/1.85mm, 2.92mm/2.4mm for DC - 40GHz
Re-Formable Semirigid Cable Assemblies, Between:
FrequencyRange
DC-40GHz
ConnectorInterfaces
2.4mmand
1.85mm
2.92mmand
2.4mm
Cable Properties
Outer Conductor: 2.2mm Dia.Copper with Cu/Sn/Zn plated
Center Conductor: Silver plated copper
Insulator: Solid PTFE
Moding Freq.: 61GHz(Approx.)
Delay Time: 1.43ns/300mm
Inside Bending Radius: 3.2mm(min)
Non-Magnetic
TYPE
DC-50GHz
2.92mmand
1.85mm
[*] Please specify length(L: see following table), when you order this item. For example: CA240F185M0035 (Length:35mm)
DESCRIPTION The Re-Formable Semirigid Cable Assemblies, Between, up to 40and 50 GHz, easy to install with bending on your Labs./Sites, are designed for broadband measurement, instrument and system use. All materials are "lead free".
SPECIFICATIONS:
2.92mm (KPC292)
abcdefg
φ1.270 φ2.920 φ4.640 φ4.580 φ0.920 0-0.080 0-0.080
f
a b c
1/4-36 UNS-2AReference Plane
abd e
g
1/4-36 UNS-2B
8 HEX.Reference Plane
Female Male
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H
abd e
g 8 HEX.Reference Plane
φ1.042 φ2.400 φ4.770 φ4.750 φ0.511 0-0.080 0-0.080
abcdefg
2.4mm(KPC240)
Female Male
1.85mm(KPC185 )
abcdefg
φ0.803 φ1.850 φ4.770 φ4.750 φ0.511 0-0.080 0-0.080
f
a b c
M7x0.75 -6g
Reference Plane
M7x0.75-6H
abd e
g 8 HEX.Reference Plane
Female Male
When you install the cableassemblies, pleasesupport a cable near theconnector and tighten thenut, because the cable thatcomposed of a thin coppertube may be damagedeasily by a twist stress.
Fig.2 Tightening of Nut
Connector Interface Mating Dimensions (IEEE-std-287 Conformed)
Copyright(C) 2004 KAWASHIMA Mfg. Co., Ltd. All rights reserved.
Kawashima Manufacturing Co., Ltd.1-3-5 Higashiikuta, Tama-ku,Kawasaki 214-0031 JAPAN
TEL: +81-44-911-7073 FAX: +81-44-911-9621http://www.kmco.biz/ e-mail: [email protected]
ISO9001:2000 Certified
Production Status Two weeks Lead-Time willbe available for shipping.
GHz
Inse
rtion
Los
s dB
(Typ
)
Fig.1 Frequency vs Insertion Loss, L=300mm
0.00.20.40.60.81.01.21.41.61.82.02.2 0 5 10 15 20 25 30 35 40 45 50
300mm (1 Feet)
Hand Bender 2200 For Re-Forming(R3.2/7mm)
Notice: About the cable bending with hand bender 2200
To prevent the cable damage in the joint part of thecable and the connector, Please bend the cable in aplace about 4mm away from the joint part.
4mm(Approx.)
Pre-Bend(10-20deg.)
Full-Bend(90deg.)
Reference for minimum cable installationspace with rounded Re-Forming
8.6
8.6
5.4
R3.2
CA240F185FL
15.1 14.3
2.4mm Female/1.85mm Female
CA240F185ML
15.1 13.2
2.4mm Female/1.85mm Male
CA240M185FL
14.313.9
2.4mm Male/1.85mm Female
CA240M185ML
13.213.9
2.4mm Male/1.85mm Male
CA292F185FL
14.314.3
2.92mm Female/1.85mm Female
CA292M185FL
14.313.4
2.92mm Male/1.85mm Female
CA292M185ML
13.213.4
2.92mm Male/1.85mm Male
CA292F240FL
14.3 15.1
2.92mm Female/2.4mm Female
CA292F240M2.92mm Female/2.4mm Male L
14.3 13.9
CA292M240FL
13.4 15.1
2.92mm Male/2.4mm Female
CA292M240M2.92mm Male/2.4mm Male L
13.4 13.9
CA292F185ML
13.214.3
2.92mm Female/1.85mm Male