idt imesh · idt imesh tm multipoint to multipoint wireless networks as bt withdraw the legacy...
TRANSCRIPT
IDTIDT iMeshTM
multipoint to multipoint wireless networks
As BT withdraw the legacy leased circuits that have traditionally been used for communications
to traffic signals, UTC operators are increasingly replacing them with wireless networks using
iMesh™.
iMesh™ uses only open standards - both for client access
and backhaul. Not only does this assist integration with other
systems but also eliminates the risks associated with deploying
proprietary solutions.
Not only does iMesh™ offer substantial revenue savings over legacy BT circuits, it also
provides the opportunity to integrate other functions such as CCTV, remote wireless vehicle
detection and other UTMC-compliant systems such as parking guidance signs and counters.
One iMesh™ router is required at each node in a network (for
example, in a controller cabinet or up a signal pole). Backhaul
links (using fibre, ADSL or IDT’s iCell router) provide the
connections from the on-street network to the UTC instation.
iMesh™ has an operating range of around 500m and supports multiple hops. As
iMesh™ is simultaneously both an access point and a network client it can be
used as a repeater.
Benefits and features
Multipoint to multipoint connectivity
Re-routes automatically via other available nodes in the event of node removal or failure
Easy configuration via web broswer
Multiple hops (including repeater capability)
Very secure - WPA (Wi-FI Protected Access), Layer 2 isolation & MAC address database
Very wide operating temperature range (-30°C to +70°C)
Multi-standard: IEEE802.11 a/b/g/n/s (draft)
IPv6 compliant
Internal (cabinet-mounting) and external (pole-mounting) options
VPN (SSL and IPsec) and firewall
Multi-frequency: 2.45GHz, 5.8GHz
Multi-radio: Up to 3 radios on any band or standard
Up to 4 virtual access points per radio - allows up to 12 distinct networks each supporting a separate function
deliver comms to VMS and other UTMC devices over links shared with UTC
connect remote car park entrances and exits to a single, central car park occupancy counter
replace BT multipoint circuits in UTC systems
Example applications
Example installations
© 2017 Integrated Design Techniques Limited. All rights reserved. Specifications included in this datasheet are subject to change without notice iMesh4_3_200317.indd
For further information on any of IDT’s products or to discuss how they can be used please contact us at:
IDT Ltd, Endurance House, Seventh Avenue, Team Valley, Tyne & Wear, NE11 0EF, United Kingdom
t: +44 (0)191 491 0800 e: [email protected] www.idtuk.com
About IDT
IDT is a leading provider of communication networks for smart cities and intelligent transport systems (ITS). Our iMesh networks delivery secure communications to over 5,500 traffic signal controlled junctions and our iCell routers are in over 2,500 UTMC-compliant variable message signs and other ITS assets.
Configure via browser
QoS
Technical Specifications
WEP (64/128 bit), WPA, WPA2 Authentication
Reserved bandwidth and priority by application or IP address
Wireless SecurityMAC Address Access Control
Hidden SSID
VLAN
Firewall Netfilter - rule-based, multizone firewalling with NAT and masqueradePort forwarding
2-port Ethernet auto-switching
WAN port
Dimensions 268 x 268 x 86 mm (width x depth x height)
Weight 0.8 Kg
QoS
General
245 x 225 x 45mm (width x depth x height)
Internal option
Outdoor option
Environmental
Environmental
Dimensions
Weight 0.8 Kg
with integral 15dBi directional antenna
5 – 95% RH IP54-30 to +70°C
IP675 – 95% RH-30 to +70°C
LAN port
1-port Ethernet auto-switching
Serial port Terminal/Maintenance
VPN (SSL & IPsec)
USB For future expansion
SNMP Compliant
Power 220Vac or Power over Ethernet
696726928
globalgroupISO 9001 5965
®
696726928
IDTwww.idtuk.com