identity cctv required installation audio video cctv system by sarbini, s.pd (smk muh 3 yogyakarta)
TRANSCRIPT
Teknologi dan Rekayasa
IDENTITY CCTV REQUIRED
1. CCTV SYSTEM ELEMENTS
2. LIGHTING
3. LENS
4. FOCAL LENGTH AND AREA VIEW
Teknologi dan Rekayasa
CCTV ELEMENTS SYSTEM
SIX DESIGN CONSIDERATION
1. Enviromental picture taking
2. Camera Lens
3. Transmission media
4. Monitor
5. Video signal management
6. Controller equipment
LIGHTING
Without light in point camera can't perform task with every consideration which is give desirable image
Based on lighting, available 2 camera types :
– FULL VIDEO :
– USABLE VIDEO
LENS
Lens are optical component of system that describe picture screen include size, form and focus.
Three factor of quality lens influence
1. Glass Absorption factor
2. Coating and Polishing
3. Mechanism
LENS SELECTION
STEP FOR LENS SELECTION
1. Picture taking place identification, (to estimate with lens, broad estimation / vertical high picture taking)
2. Distance estimation of camera goes to picture taking place
3) Focal elongated computing of lens
4) Estimate horizontal's dimension and vertical area view critical
5) Determining area view critical measure in monitor
6) Choose for lens the most approaches requirement
CAMERA
QUALITY DETERMINANT AND REABILITY OF CCTV SYSTEM
Image censor resolution Signal Comparation to noise Automatic light compensation Synchronization Output signal Environmental conditions and camera reability Dimensions and weight
MONITOR
Display ( monitor) criteria grouped in two category :
Electronics factor
Human interface factor
3 parameter that regard operator ability is engaged monitor efficiently :
Display size
Operator distance goes to to monitor = (Measure monitors (in inchi) – 4 = optimum visibilities +/- 25% (feet)
Viewpoint