ideal placement product description ... guides/2016...product description posterior anterior bridges...
TRANSCRIPT
Taper between4° & 8°
Occlusal reduction of at least 2.0 mm in contact area
360° Shoulder preparation of at least 1.0 mm proximal reduction
Coronal Length at least 4.0 mm
Butt joint margin
Rounded internalline angels
Football-shaped
Butt joint margin 1.0 mm reductionat gingival margin
1.0 mm to 1.5 mm facial reduction
1.5 mm lingualcontact clearance
1.5 mm to 2.0 mm incisal reduction
ANTERIOR CROWN PREPARATION POSTERIOR CROWN PREPARATION
Rounded internalline angels
1.0 mm reductionat gingival margin
1.5 mm to 2.0 mm occlusal reduction
1.5 mm axial reduction
diamond bur is utilized to establish a butt joint margin
Depth cuts of 0.6 mm to 0.8 mm
Incisal 1.0-1.5 mm
LAMINATE VENEER PREP
CEMENTATION
REQUIREMENTSVeneers, IPS Empress® must be adhesively bonded (light cure or dual cure). e.max® Pressed adhesive bonding suggested. All other products on this list may utilize conventional cementations or adhesive bond. Cementations or adhesive bond.
Metal Free CHAIRSIDE GUIDE 800.259.3717 | dentalservices.netA
ll ce
ram
ic o
ptio
ns
PRODUCT DESCRIPTION POSTERIOR ANTERIOR BRIDGES INLAY/ONLAY VENEERS STRENGTHPREP REQUIRED
IDEAL PLACEMENT
3 units, with one pontic
3 units, with one pontic
CAD/CAM milled monolithic full contour zirconia crown ideal for bruxing patients
Ideal prep required
Ideal prep, 360° shoulder/chamfer 7
Highly esthetic solid zirconia is designed speci�cally to satisfy the esthetic and functional requirements of the anterior region of the mouth
Highly esthetic solid zirconia is designed speci�cally to satisfy the esthetic and functional requirements of the anterior region of the mouth
0.8mm required, 1.25mm is ideal,stumpf shade needed
0.8mm required, 1.25mm is ideal,stumpf shade needed
6
6
Laminate Veneers Ultra thin porcelain veneers, stacked or pressedMin. prep and ideal esthetics, stumpf shade needed
Leucite-reinforced glass ceramic that
Pressed lithium discillicate with great �tand esthetics
provides a highly esthetic solution for single unit restorations that are adhesively bonded.
Circular shoulder or chamfer®EmpressIP
S
ESTHETIC
Empress®
IPS
ESTHETIC
Lava™CAD/CAM Zirconia substructure with porcelain overlay, translucent 2-6 units, splinted crowns, cantilever
bridges, Maryland bridges
Chamfer 1mm axial/1m5mmocclusial
CAD/CAM Zirconia substructure with porcelain overlay, translucent Splinted crowns, cantilever bridges,
Maryland bridges
Chamfer 1mm axial/1m5mmocclusial
3 units. Available only through premolars
Circular shoulder or chamfer,stump shade neededPRESSED
CAD milled lithium discillicate available in high or low translucency
Circular shoulder or chamfer,stump shade needed
CAD
CAD/CAM milled monolithic full contour zirconia crown ideal for bruxing patients
Ideal prep, 360° shoulder/chamferDSmz™
DSz™
DSez™
Ideal prep required7
5
3
4
2
5
1
(1 TO HIGHEST STRENGTH)
≥1.2≥1.2
1.5 1.5
2.0
OCCLUSAL REDUCTION1.5 mm minimum
COPING DESIGNDoctor’s choice: metal to the edge, metal collar, and/or porcelain butt
≥1.2≥1.2
1.5
1.5
1.5
2.0 2.0
MARGIN DESIGNDoctor’s choice: knife-edge, chamfer, shoulder, bevel
AXIAL WALL PREPARATION• Reduction: 1-1.5 mm• Taper: no more than 22 degrees• Height: posterior 4 mm; anterior 3 mm
MARGIN DESIGNDoctor’s choice: knife-edge, chamfer, shoulder, bevel
≥1.2≥1.2
1.5 1.5
2.0
OCCLUSAL REDUCTION1.5 mm minimum
COPING DESIGNDoctor’s choice: metal to the edge, metal collar, and/or porcelain butt
≥1.2≥1.2
1.5
1.5
1.5
2.0 2.0
MARGIN DESIGNDoctor’s choice: knife-edge, chamfer, shoulder, bevel
AXIAL WALL PREPARATION• Reduction: 1-1.5 mm• Taper: no more than 22 degrees• Height: posterior 4 mm; anterior 3 mm
MARGIN DESIGNDoctor’s choice: knife-edge, chamfer, shoulder, bevel
Full
Cast
Allo
y
Hign Noble/Precious - Contains at least 40% gold and 60% (total) gold, palladium, and platinum.
Porcelain to “Composite Metal” Gold, platinum, and palladium attraction Up to 15mm span
Standard
Standard PFM CHAIRSIDE GUIDE
PRODUCT DESCRIPTION POSTERIOR ANTERIOR BRIDGES INLAY/ONLAY VENEERS PREP REQUIRED
IDEAL PLACEMENT
Porc
elai
n to
Met
al
Standard
Standard
Noble/Semi-Precious - Contains at least (total) 25% gold, palladium and platinum.
Predominately Base/Non-precious
Hign Noble/Precious - Contains at least 40% gold and 60% (total) gold, palladium, and platinum.
Noble/Semi-Precious - Contains at least (total) 25% gold, palladium and platinum.
Predominately Base/Non-precious
Porcelain Fused to Metal Preparation
122015FCSG1
800.259.3717 | dentalservices.net