id a20l:using embedded tools for i2c, spi, and usb debugging and development for renesas mpu and...
TRANSCRIPT
![Page 1: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/1.jpg)
ID A20L: Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs
Kumaran Santhanam
VP Technology
Version: 1.1
Total Phase
12 October 2010
![Page 2: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/2.jpg)
2
Kumaran Santhanam
Vice President of Technology Aardvark and Cheetah host adapter lines Beagle protocol analyzer lines
Education B.S. EECS from the University of California at Berkeley M.S. EE from Stanford University
Work Experience 20 years experience with embedded systems development 9 years at Total Phase designing hardware and software
development tools Currently responsible for developing technology for use in
current and future products Key role in providing architecture and technical direction for the
product development team
![Page 3: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/3.jpg)
3
Solutions for Innovation
I2C, SPI, and USB communication is ubiquitous across embedded systems.
![Page 4: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/4.jpg)
4
Total Phase Solutions
By using debugging tools manufactured by Total Phase, you can:
Debug in real-time
Quickly evaluate embedded systems
Program EEPROMS and flash memories
Easily collaborate with colleagues
Maximize productivity
![Page 5: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/5.jpg)
5
Agenda
Introduction to the Renesas SH7216 Demo Kit Introduction to Total Phase Development Tools Lab
Lab Set Up Aardvark host adapter and Control Center Software Beagle protocol analyzers and Data Center Software Bug 1: I2C LCD Bug 2: Read I2C Advanced: Implement SPI Feature
Q&A
![Page 6: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/6.jpg)
6
Renesas SH7216 Demonstration Kit
![Page 7: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/7.jpg)
77
Renesas SH 7216 Demo Kit
The SH7216 board can be used to develop custom prototypes using the on-board I/O expansion headers.
The board features:– SH7216 (running at 192 MHz)– FS USB Device Controller– MicroSD Card Socket– On-Board E10A Debugger– 3-Axis Analog Accelerometer– Microphone– 2x8 Character LCD– EEPROM– 12 LEDs (to simulate motor winding)– Potentiometer
Your Company Logo HERE
![Page 8: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/8.jpg)
88
Renesas SH7216 Demo Board
SH7216
MotorLEDs
LCD
E²
EEPROM
Beagle
Beagle Header
Power
Micro SD
E10A Debugger Circuitry
USB Port
Mini USB
Ethernet
USB Port
CAN Circuit
Reset
JN5 JN1
JN6 JN2
PHY
Expansion Area
Volume
Audio
Mic
3D
3-Axis Accelerometer
![Page 9: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/9.jpg)
99
Renesas SH7216 Demo Board
SH7216
MotorLEDs
LCD
E²
EEPROM
Beagle
Beagle Header
Power
Micro SD
E10A Debugger Circuitry
USB Port
Mini USB
USB Port
Reset
![Page 10: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/10.jpg)
1010
Renesas SH7216 Demo Board
SH7216
MotorLEDs
LCD
E²
EEPROM
Beagle
Beagle Header
Power
Micro SD
E10A Debugger Circuitry
USB Port
Mini USB
USB Port
Reset
USB
SPI
I2C
![Page 11: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/11.jpg)
1111
Total Phase Development Tools
![Page 12: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/12.jpg)
12
Aardvark I2C/SPI Host Adapter
General purpose I2C/SPI master or slave Active communication on the I2C bus up to 800 kHz Active communication up to 8 MHz as an SPI master and up to 4 MHz as an SPI slave GPIO with selectable pins
Aardvark I2C/SPIHost Adapter
![Page 13: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/13.jpg)
1313
Beagle Protocol Analyzers
Beagle USB 480 Protocol Analyzer Non-intrusively monitor high-, full-, and low-speed USB 2.0 Interactive Real-Time Display, Filter, and Search Real-time class-level decoding
Beagle I2C/SPI Protocol Analyzer Non-intrusively monitor I2C and SPI Interactive Real-Time Display, Filter, and Search
Beagle USB 480Protocol Analyzer
Beagle I2C/SPIProtocol Analyzer
![Page 14: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/14.jpg)
1414
Total Phase Software
Data Center Software LiveDisplay LiveFilter LiveSearch 32-bit and 64-bit support Tree View and Block View Cross-platform compatible
Control Center Software Read and Write I2C/SPI messages XML Batch Script support Built-in Help System Multiple adapter support Cross-platform compatible
![Page 15: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/15.jpg)
1515
Section 1: Lab Set Up
![Page 16: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/16.jpg)
16
1. Make sure you have all the materials listed on the lab handout.
2. Confirm that the board power adapter is connected and plugged into an outlet.
3. Plug the Beagle I2C/SPI analyzer and Aardvark adapter into the 10-pin split cable.
4. Connect the Beagle USB 480 analyzer to the computer via the analysis and host ports.
5. Verify the DIP switch, SW1, is set to the correct DEBUG configuration shown below.
16
Section 1: Lab Set Up
![Page 17: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/17.jpg)
1717
Section 1: Lab Set Up
SH7216
MotorLEDs
LCD
E²
EEPROM
Beagle
Beagle Header
Power
Micro SD
E10A Debugger Circuitry
USB Port
Mini USB
USB Port
Reset
I2C
SPI
6. Connect the mini-B USB cable to the debugger.
USB
![Page 18: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/18.jpg)
1818
Section 2: Aardvark Host Adapter
![Page 19: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/19.jpg)
19
Section 2: Aardvark Host Adapter
1. Open the Control Center Software
2. Click Configure Aardvark Adapter
3. Select the Device and Click OK
4. Type in the slave address 0x50
5. Set the bit rate to 100 kHz
![Page 20: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/20.jpg)
20
Section 2: Aardvark Host Adapter
6. In the message box, type 00. This is your offset.
7. Click Master Write.
8. Click Master Read.
9. In the message box type 00 00 11 22 33 44 55 66 77.
10. Click Master Write.
11. In the message box, re-enter the offset, 00.
12. Click Master Write
13. Click Master Read.
![Page 21: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/21.jpg)
2121
Section 3: Beagle Protocol Analyzers
![Page 22: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/22.jpg)
22
Section 3: Beagle Protocol Analyzers
1. Open the Data Center Software.
2. Click Connect to Analyzer.
3. Select the I2C/SPI analyzer and Click OK.
4. Click Device Settings and Select I2C.
5. Set the sampling rate to 50 MHz.
6. Set the protocol lens to I2C.
7. Start the capture.
![Page 23: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/23.jpg)
2323
Section 4: Development Start Up
![Page 24: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/24.jpg)
24
1. Open HEW
2. Select Browse to Another Workspace
3. Open the RSK7216-HID.work folder in c:\Workspace
4. Select the RSK7216-HID.hws project
24
Section 4: Development Start Up
![Page 25: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/25.jpg)
2525
Section 4: Development Start Up
5. Select Debug Connect
6. Select 10A USB Emulator OK
![Page 26: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/26.jpg)
26
7. Press the reset button and hit enter.
8. Leave the default System Clock settings to 12.00 MHz
9. Leave the ID Code as E10A (default)
26
Section 4: Development Start Up
EEPROM
Beagle Header
Mini USB
Reset
SH7216
MotorLEDs
LCD
E²
Bea
gle
Power
Micro SD
E10A Debugger Circuitry
USB Port
USB Port
I2C
SPIUSB
![Page 27: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/27.jpg)
2727
Section 4: Development Start Up
10. Select Build Build All
11. Click YES when the confirmation request appears
12. Select Debug Reset Go (Shift+F5)
![Page 28: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/28.jpg)
2828
Section 4: Development Start Up
SH7216
MotorLEDs
RenesasUSB HID
E²
LCD
Beagle
Power
Micro SD
E10A Debugger Circuitry
USB Port
USB Port
I2C
SPI
13. The motor LEDs will light up and “Renesas USB HID” will display on the LCD screen.
USB
![Page 29: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/29.jpg)
2929
Section 4: Development Start Up
SH7216
MotorLEDs
E²
Beagle
Power
Micro SD
E10A Debugger Circuitry
USB Port
USB Port
I2C
SPI
14. Plug in the USB cable to connect the board to the Beagle USB 480 analyzer
LCD
USB
![Page 30: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/30.jpg)
3030
Section 4: Development Start Up
15. Launch RSK_HID.exe from the Host directory
16. The RSK HID Application box will open
![Page 31: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/31.jpg)
3131
Section 5: Bug 1 – I2C LCD
![Page 32: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/32.jpg)
3232
Section 5: Bug 1 – I2C LCD Diagnosing the Problem
1. Click Connect in the RSK HID Application box.
2. Leave VID = 0x45b3. Leave PID = 0x2013
![Page 33: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/33.jpg)
33
Section 5: Bug 1 – I2C LCD Test Application Functions
4. Click Toggle LED
5. Click Set LCD and Type Renesas Dev Con
6. Click Clear LCD
7. Click Write I2C and type “abcdefghijklmnop”
8. Go back to the Data Center Software
9. Go back to the application box and Click I2C LCD
![Page 34: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/34.jpg)
3434
Please spend the next 5 minutes trying to find the I2C LCD bug.
SH7216
MotorLEDs
LCD
E²
EEPROM
Beagle
Beagle Header
Power
Micro SD
E10A Debugger Circuitry
USB Port
Mini USB
USB Port
Reset
I2C
![Page 35: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/35.jpg)
3535
Using the Beagle I2C analyzer, we can quickly diagnose this problem. When we Write to I2C, the Data Center displays this transaction.
The first byte of data is 00. Remember that 00 is our offset.
When we click I2C LCD, the Data Center displays these transactions.
If we closely examine the data we see that the write transaction says 08. This means that the data is being pushed to the LCD starting at offset 08. The correct offset is 00 as shown in the first write transaction.
Section 5: Bug 1 – I2C LCD Solution
![Page 36: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/36.jpg)
36
Section 5: Bug 1 – I2C LCD Solution
36
10. Select Debug | Halt Program
11. Make the corrections to source code in line 256.
12. Save (Ctrl+S)
13. Click Build (F7)
14. Click OK to download the module.
15. Click Reset Go (Shift+F5)
16. Click OK when disconnect failure appears.
17. Click Connect in the Application Box
18. Click I2C LCD to verify the solution.
![Page 37: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/37.jpg)
3737
Section 6: Bug 2 - Read I2C
![Page 38: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/38.jpg)
38
Section 6: Bug 2 - Read I2CDiagnosing the Problem
1. Click Write I2C and type “abcdefghijklmnop”
2. Click Read I2C
![Page 39: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/39.jpg)
3939
Please spend the next 5 minutes trying to isolate the Read I2C bug.
SH7216
MotorLEDs
LCD
E²
EEPROM
Beagle
Beagle Header
Power
Micro SD
E10A Debugger Circuitry
USB Port
Mini USB
USB Port
Reset
I2C
![Page 40: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/40.jpg)
4040
Using the Beagle analyzers, we can quickly diagnose this problem.
When we Read I2C, the Data Center displays these transactions.
Using the Details pane, we can see the data is being read correctly from the I2C EEPROM.
Section 6: Bug 2 - Read I2CIsolating the Problem
![Page 41: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/41.jpg)
4141
3. Open another Data Center Software
4. Connect to the Beagle USB 480 analyzer
5. Go to Capture Settings and adjust the Data Capture Limit to 700 MB
6. Start the Capture
7. Go to the Bus Pane
Section 6: Bug 2 - Read I2CIsolating the Problem
![Page 42: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/42.jpg)
4242
8. In the HEW, click Stop, then Reset Go (Shift+F5)
9. HID USB Demonstration should appear in the bus pane
10. Right click on the device and select Show Only
11. Go to the Filter tab
12. Uncheck Collapsed & SOFs
13. Apply filter
Section 6: Bug 2 - Read I2CIsolating the Problem
![Page 43: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/43.jpg)
4343
Using the Beagle USB 480 analyzer, we can diagnose this problem.
When we Read I2C, the Data Center displays these input reports.
Using the Details pane, we can see the data is being read backwards over USB.
Section 6: Bug 2 - Read I2CIsolating the Problem
![Page 44: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/44.jpg)
4444
Please spend the next 5 minutes trying to find the Read I2C bug.
SH7216
MotorLEDs
LCD
E²
EEPROM
Beagle
Beagle Header
Power
Micro SD
E10A Debugger Circuitry
USB Port
Mini USB
USB Port
Reset
I2C
USB
![Page 45: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/45.jpg)
4545
14. Select Debug | Halt Program
15. Make the corrections to source code.
16. Save (Ctrl+S)
17. Click Build (F7)
18. Click OK to download the module.
19. Click Reset Go (Shift+F5)
20. Click OK when disconnect failure appears.
21. Click Connect in the Application Box
22. Click Read I2C to verify the solution.
Section 6: Bug 2 - Read I2CSolution
![Page 46: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/46.jpg)
4646
Section 7: Implement SPI Feature
![Page 47: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/47.jpg)
4747
1. Go back to the Data Center Software running I2C.
2. Stop the capture and Clear the capture (Ctrl+L)
3. Change the Device Settings and Protocol Lens to SPI
4. Start the Capture
5. Go back to the Application Box
6. Click Read SPI
7. Click Write SPI and type “ABCDEFGHIJKLMNOP”
8. Click Read SPI
9. Go back to the Data Center Software and compare the data.
10. Click SPI LCD
Section 7: Implement SPI FeatureDiagnosing the Situation
![Page 48: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/48.jpg)
4848
Modify the source code so that a data stack is created.
When Write SPI is clicked, you must be able to write data by SPI multiple times in sequence to the SD Card.
When SPI LCD is clicked, you must be able to send data by SPI from the SD Card to the LCD in the reverse sequence.
When Read SPI is clicked, you must only be able to read the last data written to the SD Card.
Section 7: Implement SPI FeatureThe Task
![Page 49: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/49.jpg)
4949
Please take the next 10 minutes to implement this feature.
SH7216
MotorLEDs
LCD
E²
Beagle Micro
SD
E10A Debugger Circuitry
USB Port
Mini USB
USB Port
Reset
SPI
![Page 50: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/50.jpg)
5050
11. Select Debug | Halt Program
12. At the top of the file, create a variable for stack index.
13. In the Write SPI code, use stack index to write data to sequential locations, incrementing stack index after each write.
14. In the SPI to LCD code, use stack index to retrieve last written data, then decrement stack index to previous location.
15. In the Read SPI code, use stack index to retrieve last written data.
Section 7: Implement SPI FeatureSolution
![Page 51: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/51.jpg)
5151
16. Save (Ctrl+S).
17. Click Build (F7).
18. Click OK to download the module.
19. Click Reset Go (Shift+F5).
20. Click connect in the application box.
Section 7: Implement SPI FeatureSolution
![Page 52: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/52.jpg)
5252
21. Click Write SPI and type 1111
22. Click Write SPI and type 2222
23. Click Write SPI and type 3333
24. Click Read SPI
25. Click SPI LCD
26. Click SPI LCD
27. Click SPI LCD
28. Click SPI LCD
Section 7: Implement SPI FeatureVerify the Solution
![Page 53: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/53.jpg)
5353
Questions
![Page 54: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/54.jpg)
54
Questions
![Page 55: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/55.jpg)
55
Feedback Form
Please fill out the feedback form!If you do not have one, please raise your hand
![Page 56: ID A20L:Using Embedded Tools for I2C, SPI, and USB Debugging and Development for Renesas MPU and MCUs Kumaran Santhanam VP Technology Version: 1.1 Total](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649dd25503460f94ac8760/html5/thumbnails/56.jpg)