sohatel.comsohatel.com/wp-content/uploads/2017/02/catalog_2013-en.pdf · icon key 3 video storage...
TRANSCRIPT
DE ITITDEFR ESESFREN
Catalog 2013Security Solutions
ICON KEY 3
Video StorageDIVA VMS 5
Box CamerasBC14WDR 11BC620WDR 15BC620WDR-AID 21BC820 27BC820H1 31BL820M1IR 35
Fixed Dome CamerasFD820 39IFD820 43CD820F1 47CD820F2 51
Mini Dome CamerasMD10A 55MD12A 59MSD620 63MSD622 67
High Speed Dome CamerasHD10A 73HD12A 77HD16AWDR 81HSD620 85HSD622 91HSD626 97HSD820H1-IM 103HSD820H1-EP 107HSD820H2-I 113HSD820H2-E 119HD10APRH 123HD11APRH 127HSD620PRH 131HSD621PRH 135HD18 EXP 139HSD628EXP 143
Camera AccessoriesCamera Power Adapters 149Box Camera Housings and Accessories 153
Ceiling Mount Accessories 157Pole Mount Accessories 161Wall Mount Accessories 165Dome Covers 169Multifunction Monitor 173Lenses 177Surveillance Controller 181
Codecs and ServersS-50 E -MSA 183S-54 E 187S-60 D-MC 191S-60 E 195S-64E 199S-68 E 203S620 E 207C-50 E-MC 211C-54 E-MC 215C-60 E-MC 219C620 E 223TrafficServer™ 227A-80 231
Access ControliProtect™ 235iPU-8 237Mifare® 239Orbit 1, 2, or I/O Door Controller 243Polyx Network Controller 247Sirius 251
Intrusion DetectionAlphaTool 253AlphaVision AlphaCom XL 255AlphaVision DL-600 PSTN Dialer 257AlphaVision DLM-600 GSM/GPRS Dialer 261AlphaVision Input + 8 OC Expansion Module 265AlphaVision ML 267AlphaVision ML DSP Speech Board 271AlphaVision ML GSM/GPRS Dialer 273AlphaVision ML Wireless Expansion Module 275AlphaVision ML/XL LCD Proximity Keypad 277AlphaVision ML/XL PSTN Dialer 279AlphaVision Proximity Reader 281AlphaVision PSTN-2-IP ML 283AlphaVision Relay Output Module 285AlphaVision XL 287AlphaVision XL Communication Board 291AlphaVision XL Wireless Expansion Module 293
Managed Switches
www.tkhsecurity.com
Table of Contents
XSNet™ C4208SW PoE 295XSNet™ C4216SW PoE 299XSNet™ S4124SW and XSNet™ S4124SWSFP
303
Unmanaged SwitchesXSNet™ 4000SW 307XSNet™ C4104SW 311XSNet™ S4104SW 315XSNet™ C4108SW 319XSNet™ S4108SW 323
Media ConvertersXSNet™ 3100MC 327XSNet™ 3200MC PoE 331XSNet™ 3300MC SFP 335
SFP DevicesECO-plug 339XSNet™ SFP 343
One Video - SiquraPico™ series 347Up-the-Fiber™ 4000 351VBS 2000 355Up-the-Fiber™ 4200 MM 359Up-the-Fiber™ 4200 SM 363Up-the-Fiber™ 4200 Bilinx™ 367
One Video - Optelecom9111D Series 3719711D Series 3759221D Series 3799281D Series 3839241D Series 387
Two Video - Optelecom9191D Series 3919292D Series 3959421D Series 399
Four Video - SiquraTETRA 4000 403TETRA 4200 407TETRA 4300 411
Four Video - Optelecom
9741D Series 4159341D Series 4199701D Series 4239762D Series 4279442D Series 431
Eight Video - SiquraOCTA 4000 435OCTA 4300 439
Eight Video - Optelecom9752D Series 4439782D Series 447
Multichannel Video - OptelecomSpectraStream™ 451SpectraStream™ and SpectraStreamPlus™ 455
Network Accessories - SiquraADS 1200 459CCM 1010(/RS-232) 463MC10, MC11 467MT 03 4719010, PSA, PSR 473
Network Accessories - Optelecom4132B, 4185A 4759522A Series 4799525A Series 4839551 Series 4879571Y Series 4919591 Series 4959672Y Series 4999771 Series 5039621AY, 9622AY 5079900-NMS, 9942A 5119961A-C, 9962A-C 5159971-C, 9973-C 519Option Modules 5239002, 9050BF 5279003 5299008 531
Index
www.tkhsecurity.com
Table of Contents
Refers to the number and direction ofserial data channels per module pair.One data channel can typically controlseveral PTZ cameras, leaving theremaining channels available for thecontrol and management of other serialdevices in the field.
Small Form-Factor Pluggables (SFPs), arestandardised modular optical transceiversfor Gigabit Ethernet (1000 Base-FX) orFast Ethernet (100 Base-FX).
Refers to the number and direction ofaudio channels per module pair.
Indicates automatic infrared sensitivityunder difficult lighting situations.
Refers to the number and direction ofvideo channels per link.
Indicates wide dynamic rangefunctionality.
Refers to the number and direction ofserial high-speed data channels permodule pair.
Indicates the Ingress Protection rating(also IP66).
Refers to the number and direction ofcontact closures (dry contact) per modulepair.
Refers to the (number of) privacy masks.
Refers to the number and direction offast ethernet channels per module pair.
Indicates vandal-resistant features.
Refers to the availability of GigabitEthernet on a device.
Indicates Power over Ethernet (PoE)capability (also PoE+).
Refers to a 3.0 Megapixel imager (Also1.3 and 2.0 Megapixel).
Refers to H.264 encoding capabilities ona device.
Refers to the network video recorderstorage capacity.
Refers to the MPEG-2 encodingcapabilities on a device.
Refers to the option module supportchannels per module pair. User definableservice per option module channel:1. Contact Closure; 2. Audio; 3. Stereoaudio 4. RS-422/485 and RS-232 data; 5.Intercom (AiPhone).
Refers to the MPEG-4 encodingcapabilities on a device.
Refers to analog output capabilities ofthe device.
Refers to High-Definition capabilities ofthe device.
Refers to digital input/output capabilitiesof the device.
Refers to support for and compatibilitywith the ONVIF open standardspecification.
Refers to device‘s capability for videocontent analytics (including facial andnumber plate recognition).
Indicates a device is field hardened forextended temperature ranges.
Refers to the low power consumption ofthe product.
www.tkhsecurity.com
ICON KEY
Description
The Digital Intelligence Video Architecture (DIVA) videomanagement solution for IP-based devices offers built-inintelligence for VCA, including automatic incident detection fortraffic management and facial and license plate recognition forsecurity applications. In combination with IP cameras and codecs,DIVA offers the perfect solution for any security situation,including perimeter and homeland security, theft and vandalismprevention, and intrusion detection.
AdaptableDIVA successfully manages any size network, from a smalloperation of 10 streams to networks of over 1000 cameras. DIVAuses analytics algorithms to detect and classify faces and numberplates. It is also possible to configure a customised user interfaceand video wall layout for each predefined user profile.
IntegrationDIVA is easily integrated with third-party systems and supports awide range of subsystems, including access control, datasynchronisation, intrusion, and building management. DIVA alsoprovides flexible XML data output to communicate its events tothird-party applications. Furthermore, DIVA provides a hybridsolution to facilitate migration from analog infrastructure to an IPinstallation.
Guaranteed availabilityThe DIVA failover server ensures the reliability and availability ofthe entire system. If no response is received from one of theservers, the failover server takes on the settings and functionalityof that server. Several failover servers can be defined to monitordifferent groups of active servers.
Quality monitorDIVA monitors the position and image quality of connectedcameras to verify the effectiveness of the applied analytics. Thisultimately guarantees the dependability of the completesurveillance management solution.
Service Level Agreement (SLA)All DIVA software modules are delivered with a standard warrantyof one year. An optional extended warranty is available for up tofive years.
DIVA VMSSingle and multiple server surveillance platform
Features
• Scalable and modular architecture
• Graphical maps simplify remote management
• Centralised user management
• Automated switching to failover server(s)
• HD quality video in multiple compression standards
• Automated event – reaction macro
• Support for multiple security subsystems
• Customizable video wall management
• Facial and license plate recognition video analytics
• AID plug-in for traffic management system
• Light web-client viewer
VideoAlgorithms Supports MJPEG, MPEG-4, and H.264 for analog and IP cameras
RecordingRecording Continuous, motion, or event triggered (e.g., FaceR or CarR) recording can be
scheduled using the calendar object for repetitive action.
Screen layout and video wallScreen layout and video wall Layout management supports a virtual matrix structure; monitors can display
video streams from any camera in any layout, including on multiple workstations,monitors, and/or spot (active) layout management.
Screen modeScreen mode1
Live viewing Includes digital zoom for all live/playback video
Playback Used to display stored video from the selected camera with user-interfacecontrols
Event live and playback Displays the live and/or associated video of selected events
Floor map/plan The map/plan uses standard graphics file types, such as BMP or JPG
Clock System clock display
Target Displays video double-clicked from panel in full screen on second monitor
HTML page Enables display of web page or a predefined address
On-screen PTZ control Can also be performed using any USB joystick managed by Windows OS
User events Runs a macro linked to user event, such as a macro defined for a sequence oflayouts
1 Screen modes can be used to define a monitor layout. A screen layout can be directed to any monitor as a default setting, manualselection, or as the result of a macro. Different layouts can be combined. The display of multiple screens can be activated by a singleoperator action or alarm input.
Web clientLight web client viewer Allows authorised users remote access to video devices via a standard Internet
browser
Picture and video exportPicture and video export Still images are time-stamped and exported to PDF format. A video clip with a
selected start and end time from one or more cameras can be exportedsimultaneously. All video material can be exported to a network location orportable device. A video player is necessary when viewing exports on aWindows-based PC.
Log filesLog files All events, macros, changes, and specific user activities are logged in the
database.
ProfilesProfiles Profiles comprise user settings and macro commands. Profiles describe the
behaviour of all connected devices through predefined time frames and/orsituations. Profiles can be (de)activated through the calendar function, externalXML commands, internal macro commands, user events, and I/O contacts.
www.tkhsecurity.com
Technical SpecificationsDIVA VMS
Failover managementFailover management The DIVA failover server ensures the reliability and availability of the entire
system. If no response is received from one of the servers, the failover servertakes on the settings and functionality of that server. Several failover servers canbe defined to monitor different groups of active servers.
User managementUser management User management can only be performed by an administrator; administrators can
grant multilevel access to users among all predefined objects in the system.
CalendarCalendar Used to (de)activate profiles and run automated macros within specified periods
StatisticsStatistics Generated for devices, hard disks, and network in real time to assist support
engineers, technicians, and network managers
MacrosMacros Macros automate action(s) when a predefined combination of events (rules)
occurs. Both server and viewer macros are supported.
DatabaseDatabase The system database is Postgres, an open source enterprise database server on
which all events are stored. If VCA features are used, then more specificmetadata are stored to provide search efficiency.
Smart searchSmart search The search engine allows quick access to the selected event types and selected
times. Event criteria include motion, scene change, license plate number, andface. The results are displayed in a list with the corresponding images.
SceneRSceneR (tampering) Compares live video with a reference image to detect and track unwanted
changes in the scene such as obstruction, slight movement, and anti-masking
IntegrationIntegration (option) Integration/interaction with third-party software applications is performed via a
Software Development Kit (SDK). Communication messages can be exchangedto and from the database. This SDK is XML command-line based and enablesinteraction to and from other systems. For example, a detected face or licenseplate can trigger an action, such as a third-party access control platform,switching a layout, or starting recording.
CarRCarR (license plate recognition option) CarR detects license plates in video frames with country type classification. The
detected plates are compared to a black and white list (if defined) with a match/mismatch event result type.
www.tkhsecurity.com
Technical SpecificationsDIVA VMS
FaceRFaceR (facial recognition option) A 2D algorithm that extracts faces from live video and compares them with a
black and white list of subjects. A match/mismatch event type is generated forthe appropriate action.
AIDAID (traffic monitoring option) Collects events and incidents from the Siqura Traffic Server encoder. These can
be processed within the existing DIVA framework.
Operating systemSupported operating systems Windows Server 2008 R2 and Windows 7 Professional
Client platform hardware requirementsClient platform requirements2,3
Processor Intel® Xeon® E3-1225, 3.10GHz, 6MB, QC or Core i5 (quad core)
Memory 4GB
RAID 2x serial ATA III (7200RPM) hard drive in RAID1
Graphics card Dual or quad graphic 256MB (or higher) PCI express card with minimumresolution of 1280/1024
Network interface card 1Gb Ethernet network interface card
Audio Standard audio card
DVD 16x DVD+/RW drive
Operating system Microsoft Windows 7 SP1 Professional (64Bit); Microsoft Windows XP ProSP2/SP3 32bit
2 This platform can be used to handle both DIVA modes: Standalone mode or the real server-client mode. For more information, referto the corresponding DIVA manuals.
3 When used in standalone mode, it is recommended to have two different hard disk partitions, one for the operating system and theother for video storage (in which case the Windows allocation unit (cluster) size is 64K).
Server platform requirementsServer platform requirements4,5
Processor Intel® Xeon® E5607 Processor 2.26GHz, 8MB cache, DDR3-1066MHz
Memory 4GB
RAID Minimum of 3x HDD SATA 7200RPM, RAID5 and hot plug; RAID controller,512MB cache, for 8x HDD chassis
Resolution Standard SVGA display with minimum resolution of 1024 x 768
Network interface card Dual gigabit Ethernet network interface card
DVD 16x DVD+/RW drive
Power Redundant power supply
Operating system Microsoft Windows Server 2008 R2, Standard Edition4 It is recommended to have two different hard disk partitions, one for the operating system and the other for video storage (in whichcase the Windows allocation unit (cluster) size is 64K).Note: When defining the RAID storage partition, the stripe element size must be set to 256KB.
5 This configuration is not used for operator display and monitoring. The display is performed as from a client workstation (see above).
www.tkhsecurity.com
Technical SpecificationsDIVA VMS
Ordering informationModels Description
DIVA-S Free demo/trial of DIVA START software version
DIVA-B xxxx Standalone DIVA BASIC software version
DIVA-P-yyyy Multiple client/server DIVA PRO software version
Where xxxx and yyyy represent different available options. For more complete information, please refer to the DIVA pricing guideand price list.
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsDIVA VMS
Description
The Siqura® BC14WDR is a network box camera which providessuperior low light performance and wide dynamic range.
Image ControlThe Pixim Seawolf image sensor provides the Siqura® BC14WDRwith top-of-the-line wide dynamic range (WDR) capability as wellas 690 HTVL effective resolution. Additionally, this sensor doesnot smear, bloom or generate colour noise like older analogCCD image sensors. This makes the BC14WDR ideal forapplications using video analytics algorithms, such as automaticincident detection (AID). Video codecs can take advantage of itsprogressive scan output for smooth motion video without theneed for de-interlacing.
Power source choicesThe BC14WDR camera can be powered by 12VDC or 24VAC(terminal block).
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
Siqura surveillance solutionsThe Siqura BC14WDR is part of Siqura’s complete collection ofvideo surveillance equipment and solutions. Siqura offers videocodecs/servers, IP cameras, video management, networkstorage, and configuration software.
BC14WDRAnalog Box Camera with Super WDR
Features
• 1/3” Pixim DPS® Seawolf imager
• Day/night with IR-cut filter
• Super wide dynamic range
• Backlight compensation
• Alarm input
• Focus assistant
• 12 privacy masks
• UTC menu controller
• Power input 12VDC/24VAC
12
CameraImage sensor 1/3" Pixim DPS® Seawolf imager
Video standards PAL/NTSC (selectable via menu or switch)
Optical format 1/3” (6.3mm diagonal)
Image capture Progressive scan
Image resolution - horizontal
NTSC 690 HTVLE
PAL 690 HTVLE
Image resolution - vertical
NTSC 460+VTVL
PAL 460+VTVL
Pixel count 720 (H) x 540 (V), 388,800 active pixels
Shutter 1/30 (1/25) ~ 1/30, 720 auto
Shuttering Global electronic shuttering
Output modes Interlaced or progressive
Video output 1 Vpp, 75Ω, BNC
Lens mount CS/C
Lens type DC iris, manual
Minimum scene illumination 0.1 lux colour, 0.05lux (b/w), F1.2, 50IRE
Synchronisation system Phase-adjustable line-lock, or internal
Signal-to-noise ratio >50dB, 53dB (maximum)
www.tkhsecurity.com
Technical SpecificationsBC14WDR
Image controlWide dynamic range Configurable: 17-bits and 102dB (minimum); 20-bits and 120dB (maximum)
Backlight compensation Yes
Auto white balance ATW, AWB (push to set)
ATW range Normal: 2800K – 7500Kextended: 2000K – 11000K
Metering zones 4 predefined
Noise reduction 3D motion adaptive
Automatic gain control On/off (0-50dB gain selectable)
Flicker reduction On (Pixim EFR)/off
Day/night (IR-cut filter) Auto/manual/GPIO
Digital slow shutter 2x - 32x
Focus assistant Yes
FunctionsPrivacy masks 12
Image rotation None/180°
On-screen display 24 character, selectable position
Contact closuresInput/output 1 GPIO
Connectors Removable plug connector
DataSerial port RS485 2-wire (for remote menu control)
PoweringPower consumption <3W
Power 12VDC/24VAC
Power connector Removable plug connector
Power adapter (included) 110 - 230 VAC to 12VDC, 1.5A 50/60Hz
MechanicalDimensions (h x w x d) 63.8 x 64 x 150mm (2.51 x 2.52 x 5.90in)
Colour Black/Grey
Connector type BNC
Remote control RS-485, multi-drop; camera ID; Up-the-Coax controller
EnvironmentalOperating temperature Continuous -20°C to +55°C (-4°F to +131°F)
www.tkhsecurity.com
Technical SpecificationsBC14WDR
Ordering informationModels Description
BC14WDR Analog Box Camera, Super WDR, 690 HTVLE
PSA-UN12DC with ferrules Power adapter, 110-230VAC, 60/50hz to 12VDC, 1.5A, ferrules, with US/EU/UK plug adapters(included)
Siqura WM04 Indoor wall bracket
Siqura HSG01 Housing, fixed camera
Siqura HSG02 Housing, fixed camera, heater/blower, 24 VAC
Siqura HSG03 Housing, fixed camera, IR illuminator, heater/blower, 24 VAC
Siqura HSG02LV Housing, fixed camera, heater/blower, 90-230VAC
Siqura HSG03LV Housing, fixed camera, IR illuminator, heater/blower, 90-230VAC
Siqura HSG/WALL Bracket, wall
Siqura HSG/POLE Bracket, pole
Siqura HSG/CORNER Bracket, corner
Siqura HSG/CEILING Bracket, ceiling
Siqura HSG/SUN Housing, fixed camera, sunshield
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsBC14WDR
Description
The Siqura® BC620WDR is a network box camera which providessuperior low light performance and wide dynamic range. It is alsoa highly flexible platform which can provide both embeddedanalytics as well as multi-stream encoding. With a built-in SFPoption, the BC620WDR is ready for the widest range ofapplications.
Multistream/multicodecThe versatile BC620WDR is capable of quad streaming, with dualH.264 streams simultaneous with two flexible encoding outputswhich can provide MPEG-2, MPEG-4 or MJPEG streams. Eachstream is optimised for its purpose. The H.264 implementation isbased on dedicated hardware resulting in unparalleled videoquality.
Image quality monitor and tampering alarmThe BC620WDR is fitted with video analytics to check the healthof the camera. This image quality monitor analyzes contrast,exposure, sharpness and noise. Camera tampering analyticsdetect any changes in the camera’s position or field of view. Theinstant a camera is subject to failure or tampering, an alert can beraised.
Open Streaming Architecture (OSA)The BC620WDR is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.The BC620WDR also supports the unique Siqura® MX™protocol.
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the BC620WDR provides all the interfacesnecessary for any IP CCTV application. The BC620WDR is ahybrid solution and can provide local video for a public viewmonitor or local DVR.
Power source choicesThe BC620WDR can be powered by 12VDC or 24VAC (terminalblock) or over the network with 802.3af-compliant PoE sources.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
BC620WDRNetwork Super WDR Box CameraBC620WDRNetwork Super WDR Box Camera
Features
• 1/3” Pixim DPS® Seawolf imager
• Day/night with IR-cut filter
• Super wide dynamic range
• Backlight compensation
• 2 alarm inputs/2 outputs
• Analog output
• Two-way audio
• 10 privacy masks
• 24VAC/12VDC/802.3af PoE
• Optical output option
10
x2/x2
Features
• 1/3” Pixim DPS® Seawolf imager
• Day/night with IR-cut filter
• Super wide dynamic range
• Backlight compensation
• 2 alarm inputs/2 outputs
• Analog output
• Two-way audio
• 10 privacy masks
• 24VAC/12VDC/802.3af PoE
• Optical output option
10
x2/x2
Award-winning cameraAt the ISC West 2012 trade show, the BC620WDR series receivedthe New Product Showcase Judges’ Choice Award from theSecurity Industry Association. The Judges’ Choice Award is oneof two primary awards and is given for the product or servicethat, in the opinion of the judges, deserves recognition for itsunique approach to a security solution.
Fiber optionA fiber option is available for direct connection of fiber to thecamera via a flexible SFP interface. The XSNet™ range of SFPmodules, with options for both single mode and multi-mode arecertified for use with this camera.
Technical Specifications
Image controlWide dynamic range 17-bits and 102dB (minimum); 20-bits and 120dB (maximum)
WDR zones 4 predefined
Backlight compensation Yes
Auto white balance ATW, AWB (push to set)
ATW range Normal: 2800K – 7500K; extended: 2000K – 11000K
Metering zones Center, left, right, top, bottom, or auto
Noise reduction 3D motion adaptive
Automatic gain control On/off (0-50dB gain selectable)
Flicker reduction On (Pixim EFR)/off
Day/night (IR-cut filter) Auto/manual/GPIO
Digital slow shutter 2x - 32x
Focus assistant On-screen meter (via push button/ webpage)
www.tkhsecurity.com
BC620WDR
CameraImage sensor 1/3" Pixim DPS® Seawolf imager
Video standards PAL/NTSC (selectable via menu)
Optical format 1/3” (6.3mm diagonal)
Image capture Progressive scan
Image resolution - horizontal 690 HTVLE
Image resolution - vertical 460+VTVL
Output resolutions
D1 720x480 (NTSC)/ 720x576 (PAL)
½D1 352x480 (NTSC)/ 352x576 (PAL)
2CIF 720x240 (NTSC)/ 720x288 (PAL)
CIF 352x240 (NTSC)/ 352x288 (PAL)
QCIF 176x120 (NTSC)/ 176x144 (PAL)
Pixel count 409,388
Shutter 1/30 (1/25) ~ 1/30, 720 auto
Shuttering Global electronic shuttering
Output modes Interlaced or progressive
Video output 1 Vpp, 75Ω, BNC
Lens mount CS/C
Lens type DC iris, manual
Signal-to-noise ratio 50dB, 53dB (maximum)
Minimum scene illumination 0.1 lux colour, 0.05lux (b/w), F1.2, 50IRE
FunctionsPrivacy masks 10
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Video motion detection Yes (user-defined masking)
Camera health Focus, contrast, SNR, exposure
Tamper monitoring Image positioning (up to 16 presets)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
VideoNumber of video streams 2x H.264, 2x MPEG-4, MPEG-2, and/or MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264 MP or HP (ISO/IEC 14496-10), MPEG-4 SP Layer 5 (ISO/IEC 14496-2),MPEG-2 (ISO/IEC 13818-2), MJPEG
Types of streaming UDP/IP (multicast and/or unicast)
Number of output streams Up to 20
Encoding latency <130ms typ
GOP structure I, IP (selectable/user profiles)
Quad streaming 2x D1 at 30fps H.264+ D1 at 30fps MPEG-2, MPEG-4, or MJPEG+ CIF at 5fps MPEG-2, MPEG-4, or MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
www.tkhsecurity.com
Technical SpecificationsBC620WDR
NetworkInterface(s) RJ-45 or SFP (modules not included)
Protocols H.264 BP, MPEG-4 ES, MPEG-2, RTP, UDP, IP, DHCP, IGMPv2, RTSP, (S)NTP,MX/IP, HTTP, SNMP v2, DiffServ, SAP, UPnP
AudioNumber of channels 1 full-duplex stereo (line level); mono (mic level)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8-bit linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3V pk-pk
Input impedance >20kΩ or 600Ω
Output impedance <100Ω
Data/serial portNumber of channels 1 (full-duplex)
Number of streams 2 x 3 (multicast and/or unicast)
Interface(s) 1x RS-422/485 (2- or 4-wire)
Streams TCP, UDP, MX configurable
Data rate 300b/s to 230.4kbps
PTZ control interface(s) Serial tunneling, webpage, HTTP (API), NTCIP (SNMP)
PTZ control protocols Standard Pelco-D, Bosch, other remote loadable protocols
Contact closuresInputs Normally open (fail-safe) (2)
Outputs Fail-safe, potential-free (2)
StorageStorage options Micro SD card, 32 GB
PoweringPower consumption 8W
Power 24 VAC/12VDC/802.3af PoE
Power adapter (included) 110 - 230 VAC to 12VDC, 1.5A 50/60Hz
EnvironmentalOperating temperature Continuous -30 °C to +50 °C (-22 °F to +122 °F)
MechanicalDimensions (h x w x d) 63.8 x 64 x 150mm (2.51 x 2.52 x 5.90in)
Weight 146g (6.09oz)
Mounting interface ¼inch 20-thread top or bottom (removable block)
Colour Black/Grey
www.tkhsecurity.com
Technical SpecificationsBC620WDR
Ordering informationModels Description
BC620WDR Network box camera, Super WDR, VCA, D1 resolution, dual H.264
BC620WDR /SFP Network box camera, Super WDR, VCA, D1 resolution, dual H.264 with SFP interface
PSA-UN12DC with ferrules Power adapter, 110-230VAC, 60/50hz to 12VDC, 1.5A, ferrules, with US/EU/UK plug adapters(included)
Siqura WM-04 Indoor wall bracket
Siqura HSG01 Housing, fixed camera
Siqura HSG02 Housing, fixed camera, heater/blower, 24 VAC
Siqura HSG03 Housing, fixed camera, IR illuminator, heater/blower, 24 VAC
Siqura HSG02LV Housing, fixed camera, heater/blower, 90-230VAC
Siqura HSG03LV Housing, fixed camera, IR illuminator, heater/blower, 90-230VAC
Siqura HSG/WALL Bracket, wall
Siqura HSG/POLE Bracket, pole
Siqura HSG/CORNER Bracket, corner
Siqura HSG/CEILING Bracket, ceiling
Siqura HSG/SUN Housing fixed camera, sunshield
ECO-plug Ethernet over coax, SFP Module, 100Mb with accessory cable, 40cm
XSNet SFP MM/850 2-fiber multimode SFP (100/1000Base-FX)
XSNet SFP MM/1310 2-fiber multimode SFP (100Mb only)
XSNet SFP SM/10 Single-mode SFP,dual LC connector
XSNet SFP SM/BidiA 1-fiber single-mode SFP, SC connector
XSNet SFP SM/BidiB 1-fiber single-mode SFP, SC connector
XSNet SFP SM/60 Long distance single-mode SFP, dual LC connector
XSNet SFP SM/CWDM CWDM SFP, dual LC connector
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsBC620WDR
Description
The Siqura® BC620WDR-AID is a network box camera whichprovides superior low-light performance and wide dynamicrange. It is also a highly flexible platform which can provide bothembedded analytics as well as multistream encoding. With abuilt-in SFP option, the BC620WDR-AID is ready for the widestrange of applications.
Dual streamThe versatile BC620WDR-AID is capable of streaming two H.264,two MJPEG, or one H.264 and one MJPEG streamsimultaneously. The H.264 implementation is based on dedicatedhardware resulting in unparalleled video quality.
Image quality monitor and tampering alarmThe BC620WDR-AID is fitted with video analytics to check thehealth of the camera. This image quality monitor analyzescontrast, exposure, sharpness and noise. Camera tamperinganalytics detect any changes in the camera’s position or field ofview. The instant a camera is subject to failure or tampering, analert can be raised.
Automatic Incident DetectionThe BC620WDR-AID generates relevant traffic data and incidentdetection information by analyzing the incoming images. Therequired suite of functions, such as alerts on stopped vehicles,wrong-way drivers, pedestrians, lost cargo, smoke, and trafficflow data, can be set according to the application.
Traffic Data (/TDC only)Retrieving accurate traffic data is essential for traffic flowmanagement. The BC620WDR-AID/TDC add specificmeasurements with relation to traffic flow management to theAID analytics. It adds real-time information on volume, speed,classification, gap-time, etc.
Open Streaming Architecture (OSA)The BC620WDR-AID is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.The BC620WDR-AID also supports the unique Siqura® MX™protocol.
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the BC620WDR-AID provides all the interfacesnecessary for any IP CCTV application. The BC620WDR-AID is ahybrid solution and can provide local video for a public viewmonitor or local DVR.
Award-winning cameraAt the ISC West 2012 trade show, the BC620WDR series receivedthe New Product Showcase Judges’ Choice Award from theSecurity Industry Association. The Judges’ Choice Award is oneof two primary awards and is given for the product or servicethat, in the opinion of the judges, deserves recognition for itsunique approach to a security solution.
BC620WDR-AIDBox Camera with dual H.264, embedded AID
Features
• 1/3” Pixim DPS® Seawolf imager
• Day/night with IR-cut filter
• Super wide dynamic range
• Backlight compensation
• Traficon-powered incident detection
• 2 alarm inputs/2 outputs
• Analog output
• Two-way audio
• 24VAC/12VDC/802.3af PoE
• Optical output option
x10
x2/x2
Fiber optionA fiber option is available for direct connection of fiber to thecamera via a flexible SFP interface. The XSNet™ range of SFPmodules, with options for both single mode and multi-mode arecertified for use with this camera.
Technical Specifications
Image controlBacklight compensation Yes
Auto white balance ATW, AWB (push to set)
ATW range Normal: 2800K – 7500K; extended: 2000K – 11000K
Metering zones Center, left, right, top, bottom, or auto
Noise reduction 3D motion adaptive
Automatic gain control On/off (0-50dB gain selectable)
Flicker reduction On (Pixim EFR)/off
Day/night (IR-cut filter) Auto/manual/GPIO
Focus assistant On-screen meter (via push button/webpage)
www.tkhsecurity.com
BC620WDR-AID
CameraImage sensor 1/3" Pixim DPS® Seawolf imager
Video standards PAL/NTSC (selectable via menu)
Optical format 1/3” (6.3mm diagonal)
Image capture Progressive scan
Image resolution - horizontal 690 HTVLE
Image resolution - vertical 460+VTVL
Output resolutions
D1 720x480 (NTSC)/ 720x576 (PAL)
½D1 352x480 (NTSC)/ 352x576 (PAL)
2CIF 720x240 (NTSC)/ 720x288 (PAL)
CIF 352x240 (NTSC)/ 352x288 (PAL)
QCIF 176x120 (NTSC)/ 176x144 (PAL)
Pixel count 409,388
Shutter 1/30 (1/25) ~ 1/30, 720 auto
Shuttering Global electronic shuttering
Output modes Interlaced or progressive
Video output 1 Vpp, 75Ω, BNC
Lens mount CS/C
Lens type DC iris, manual
Signal-to-noise ratio 50dB, 53dB (maximum)
Minimum scene illumination 0.1 lux colour, 0.05lux (b/w), F1.2, 50IRE
FunctionsPrivacy masks 10
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Video motion detection Yes (user-defined masking)
Camera health Focus, contrast, SNR, exposure
Tamper monitoring Image positioning (up to 16 presets)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
VideoNumber of video streams 2x H.264/MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264 MP or HP (ISO/ IEC 14496-10), MJPEG
Types of streaming UDP/IP (multicast and/or unicast), TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Encoding latency <130ms typ
GOP structure I, IP (selectable/user profiles)
Dual streaming 2x D1 at 30fps H.264/MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
www.tkhsecurity.com
Technical SpecificationsBC620WDR-AID
NetworkInterface(s) 10/100Mb Ethernet
Protocols H.264 MP or HP, RTP, UDP, IP, DHCP, IGMPv2, RTSP, (S)NTP, MX/IP, HTTP,SNMP v2, DiffServ, SAP, UPnP
Connector type RJ-45 or SFP (modules not included)
AudioNumber of channels 1full-duplex stereo (line level); mono (mic level)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8-bit linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ or 600Ω, single-ended
Output impedance <100Ω, single-ended
Data/serial portNumber of channels 1 full-duplex
Number of streams 2 x 3 (multicast and/or unicast)
Interface(s) 1x RS422/485 (2- or 4-wire)
Streams TCP/UDP/MX configurable
Data rate 300b/s to 230.4kbps
PTZ control interface(s) Serial tunneling, webpage, HTTP (API), NTCIP (SNMP)
PTZ control protocols Standard Pelco-D, Bosch, other remote loadable protocols
Contact closuresInputs Normally open (fail-safe) (2)
Outputs Fail-safe, potential-free (2)
StorageStorage options Micro SD card, 32 GB
Embedded automatic incident detectionStopped vehicle 16 stop zones
Inverse direction 8 zones
Speed drop 8 zones
Levels of service Normal, dense, delayed, congested, stop and go (8 zones)
Pedestrian 16 zones
Debris/fallen object 16 zones
Smoke Only for tunnel applications
www.tkhsecurity.com
Technical SpecificationsBC620WDR-AID
Traffic data collectionIndividual vehicle traffic data
Timestamp Yes
Lane number Yes
Individual speed Yes
Classification Yes
Gap time per length class per lane
Length average vehicle length per lane
Confidence volume per class per lane, maximum 8 lanes
Average speed per class per lane
Headway Yes
Occupancy per lane
Density per lane, number of vehicles/km
PoweringPower consumption 8W
Power 24 VAC/ 12VDC/ 802.3af PoE
Power adapter (included) 110 - 230 VAC to 12VDC, 1.5A 50/60Hz
EnvironmentalOperating temperature Continuous -30 °C to +50 °C (-22 °F to +122 °F)
MechanicalDimensions (h x w x d) 63.8 x 64 x 150mm (2.51 x 2.52 x 5.90in)
Colour Black/Grey
www.tkhsecurity.com
Technical SpecificationsBC620WDR-AID
Ordering informationModels Description
BC620WDR-AID Network box camera, Super WDR, AID, D1 resolution, dual H.264
BC620WDR-AID /SFP Network box camera, Super WDR, AID, D1 resolution, dual H.264 with SFP interface
BC620WDR-TDC Network box camera, Super WDR, TDC, D1 resolution, dual H.264
BC620WDR-TDC /SFP Network box camera, Super WDR, TDC, D1 resolution, dual H.264 with SFP interface
PSA-UN12DC with ferrules Power adapter, 110-230VAC, 60/50hz to 12VDC, 1.5A, Ferrules, with US/EU/UK plug adapters(included)
Siqura WM-04 Indoor wall bracket
Siqura HSG01 Housing, fixed camera
Siqura HSG02 Housing, fixed camera, heater/blower, 24 VAC
Siqura HSG03 Housing, fixed camera, IR illuminator, heater/blower, 24 VAC
Siqura HSG02LV Housing, fixed camera, heater/blower, 90-230VAC
Siqura HSG03LV Housing, fixed camera, IR illuminator, heater/blower, 90-230VAC
Siqura HSG/WALL Bracket, wall
Siqura HSG/POLE Bracket, pole
Siqura HSG/CORNER Bracket, corner
Siqura HSG/CEILING Bracket, ceiling
Siqura HSG/SUN Housing, fixed camera, sunshield
ECO-plug Ethernet over coax, SFP Module, 100Mb with accessory cable, 40cm
XSNet SFP MM/850 2-fiber multimode SFP (100/1000Base-FX)
XSNet SFP MM/1310 2-fiber multimode SFP (100Mb only)
XSNet SFP SM/10 Single-mode SFP, dual LC connector
XSNet SFP SM/BidiA 1-fiber single-mode SFP, SC connector
XSNet SFP SM/BidiB 1-fiber single-mode SFP, SC connector
XSNet SFP SM/60 Long distance single-mode SFP, dual LC connector
XSNet SFP SM/CWDM CWDM SFP, dual LC connector
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsBC620WDR-AID
Description
The Siqura® BC820 is a full-featured network box cameraproviding high-quality, high-definition images.
Multistream high definitionThe BC820 series cameras have dual-stream capability forsimultaneous streaming of H.264/H.264 or H.264/MJPEG. FullHD 1080p streaming with a D1 second stream or dual 720pstreams is possible. Multiple combinations of resolution andframe rate can be configured to satisfy different live viewing andrecording scenarios.
Open standardsMultiple options are available to easily integrate the BC820 to avideo management system. In support of open standards, theBC820 is compliant with both the ONVIF specification andSiqura's Open Streaming Architecture (OSA) HTTP API.
Day/night, backlight compensation, and wide dynamicrangeThe BC820 provides automatic day/night functionality, for use inlow light situations. Backlight compensation enhances imagevisibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Power source choicesThe BC820 can be powered by 12VDC or 24VAC (terminal block)or over the network with 802.3af-compliant PoE sources.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
BC820High Definition Box Camera with Day/Night, H.264
Features
• Multiple resolutions: 1080p/720p
• 1/2.7” progressive scan CMOS imager
• Dual-stream H.264 and MJPEG video
• ONVIF-compliant
• Two-way audio
• Day/night with IR-cut filter
• 24VAC/12VDC/802.3af PoE
• Contact closures (alarms) - 1 output, 1 input
RS-485 x5
x1/x1
CameraImage sensor 1/2.7” progressive scan CMOS
Video standards PAL/NTSC
Output resolutions 1080p (1920x1080); 720p (1280x720); 1024x768; 800x600; D1 (720x480); CIF(352x240)
Effective pixels 1920(H) x 1080(V)
Digital slow shutter 1 ~ 1/15 sec
Shutter speed 1- 1/10000 sec
Signal-to-noise ratio >40dB
Analog output BNC (1 Vpp)
Lens type C/CS-mount
Minimum scene illumination 0.2lux colour; 0.02lux (b/w)
Image controlWide dynamic range On/off
WDR value 69 dB
Backlight compensation On/off
White balance Auto/manual
Saturation Manual
Hue Manual
Iris control DC iris
Exposure Auto/manual
Contrast Manual
Brightness Manual
Sharpness Manual
3D Noise reduction On/off
Day/night (IR-cut filter) Auto/on/off/smart
Digital zoom Yes
www.tkhsecurity.com
Technical SpecificationsBC820
FunctionsPrivacy masks 5
Privacy mask type Colour
Video motion detection 10 user-defined; rectangular masking; adjustable detection level, sensitivity, timeinterval
Language support English, French, German, Italian, Korean, Simplified Chinese, Traditional Chinese,Russian
Event notification HTTP, FTP, SMTP
Tampering alarm On/off
VideoNumber of video streams 2x H.264 or H.264/MJPEG
Compression algorithm(s) H.264 MP (ISO/IEC 14496-10), MJPEG
Maximum streaming capabilities
Stream 1 H.264 - 1080p30H.264 - 1080p15H.264 - 720p30MJPEG - 1080p30
Stream 2 H.264- D1 30fpsMJPEG- D1 30fpsH.264 - 1080p15MJPEG- 1080p15H.264 - 720p30H.264 - 720p30MJPEG- 720p30
NetworkInterface(s) 10/100 Ethernet (RJ-45)
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP,PPPoE, UPnP, IGMP, SNMP, IEEE 802.1x, QoS, ONVIF
Password levels User and administrator
Supported browsers Internet Explorer (6.0+), Chrome, Firefox, Safari
User accounts 20
AudioTwo-way audio G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
DataSerial port RS-485- 2-wire
Protocols Pelco-D, Pelco-P
Contact closuresInput 5V 10kΩ pull-up
Output Photo relay output 300VDC/AC
Reactions 4-pin terminal block, pitch 3.5mm
StorageStorage options Micro SD card, 32 GB
www.tkhsecurity.com
Technical SpecificationsBC820
PoweringPower consumption 4W
Power 12VDC/24VAC/Power over Ethernet (PoE)
Power connector Terminal block
EnvironmentalOperating temperature -10 °C to +50 °C (+14 °F to +122 °F)
Relative humidity 10% to 90%, no condensation
MechanicalDimensions (h x w x d) 125 x 82 x 52mm (without lens)
Weight 330g (0.73lbs)
Colour Black/Grey
Ordering informationModels Description
BC820 Network box camera, 1080p CMOS, day/night, H.264/MJPEG
PSA-UN12DC with ferrules Power adapter, 110-230VAC, 60/50Hz to 12VDC, 1.5A, ferrules, with US/EU/UK plug adapters(included)
WM04 Indoor wall bracket
HSG01 Housing, fixed camera
HSG02 Housing, fixed camera, heater/blower, 24 VAC
HSG02LV Housing, fixed camera, heater/blower, 90-230VAC
HSG03LV Housing, fixed camera, IR illuminator, heater/blower, 90-230VAC
HSG/WALL Bracket, wall
HSG/POLE Bracket, pole
HSG/CORNER Bracket, corner
HSG/CEILING Bracket, ceiling
HSG/SUN Sunshield for fixed camera housing
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.6 - Subject to modification.
Technical SpecificationsBC820
Description
The Siqura® BC820H1 is a full-featured network box cameraproviding high-quality, high-definition images. The integrated18x optical zoom, auto-focus lens makes for the easiestinstallation and remote adjustment.
Multistream high definitionThe BC820H1 series cameras have dual-stream capability forsimultaneous streaming of H.264/H.264 or H.264/MJPEG. FullHD 1080p streaming with a D1 second stream or dual 720pstreams is possible. Multiple combinations of resolution andframe rate can be configured to satisfy different live viewing andrecording scenarios.
Open standardsMultiple options are available to easily integrate the BC820H1 toa video management system. In support of open standards, theBC820H1 is compliant with both the ONVIF specification andSiqura's Open Streaming Architecture (OSA) HTTP API.
Day/night, backlight compensation, and wide dynamicrangeThe BC820H1 provides automatic day/night functionality, for usein low light situations. Backlight compensation enhances imagevisibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Power source choicesThe BC820H1 camera can be powered by 12VDC or 24VAC(terminal block).
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
BC820H1HD box camera with integrated optics
Features
• Sony Progressive CMOS
• Full HD 1080p resolution
• H.264 and MJPEG compression
• Two-way audio
• 18x optical zoom
• Day/night with IR-cut filter
• 5 privacy masks
• Micro SD support
• ONVIF-compliant
5
x1
CameraImage sensor Sony Progressive CMOS
Video standards PAL/NTSC
Maximum streaming capabilities
Stream 1 H.264 - 1080p30H.264 - 1080p15H.264 - 720p30MJPEG - 1080p30
Stream 2 H.264- D1 30fpsMJPEG- D1 30fpsH.264 - 1080p15MJPEG- 1080p15H.264 - 720p30H.264 - 720p30MJPEG- 720p30
Output resolutions 1080p (1920x1080); 720p (1280x720); XVGA (1024x768); SVGA (800x600); D1(720x480); VGA (640x480) CIF (352x240)
Effective pixels 1920(H) x 1080(V)
Shutter speed 1~ 1/10000 sec.
Signal-to-noise ratio >40dB (AGC off)
Minimum scene illumination 0.2lux colour, 0.02lux (b/w)
Horizontal field of view 61.5˚ wide to 3.3˚ tele
Focal length 4.7 – 84.6mm (F1.6 wide, F2.8 tele)
Analog output BNC 1 Vpp/75Ω impedance
www.tkhsecurity.com
Technical SpecificationsBC820H1
Image controlWide dynamic range On/off
WDR value 75 dB
Backlight compensation On/off
White balance Auto/manual
Saturation Manual
Hue Manual
Exposure Auto/manual
Brightness Manual
Contrast Manual
Sharpness Manual
3D Noise reduction On/off
Day/night (IR-cut filter) Auto/on/off
Digital zoom 8x
Optical zoom 18x
FunctionsPrivacy masks 5 solid colour
Image rotation Normal, flip, mirror,90° (clockwise, counterclockwise), and 180° rotate
VideoNumber of video streams 2x H.264 or H.264/MJPEG
Compression algorithm(s) H.264 MP (ISO/IEC 14496-10), MJPEG
NetworkInterface(s) 10/100Mbps Ethernet (RJ-45)
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP,PPPoE, UPnP, IGMP, SNMP, QoS, ONVIF
AudioTwo-way audio Line out, line in/mic in (jack Ø3.5 mm)
Compression G.711 (µ-law, a-law)/G.726
Input level Adjustable gain, mic or line level
Output level Adjustable gain
Contact closuresAlarm input 1x 5V 10kΩ pull-up input
Operational modes Normally open/normally closed
Triggered actions Enable output; email message, email image, FTP message, FTP image, record onSD card, API event
Alarm output Photo relay output 300VDC/AC
www.tkhsecurity.com
Technical SpecificationsBC820H1
StorageStorage options Micro SD card, 32 GB
Local recording Continuous, scheduled, alarm
Management OSA (API), webpage
PoweringPower consumption 6W (500mA)
Power 12VDC/24 VAC
Power adapter (included) 110 - 230 VAC to 12VDC, 1.5A 50/60Hz
EnvironmentalOperating temperature 0°C to +40°C (+32°F to +104°F)
Relative humidity 10% to 90%, no condensation
MTBF (mean time between failures) >100,000 hours at 50˚C
Mechanical (camera)Dimensions (h x w x d) 183.2 x 80.2 x 52.40mm (7.22 x 3.16 x 2.1in)
Weight 450g (1.0lbs)
Housing Aluminium
Colour Black/Grey
Ordering informationModels Description
BC820H1 IP fixed box camera, 1080p, integrated 18x zoom; H.264/ MJPEG, day/night
PSA-UN12DC with ferrules Power adapter, 110-230VAC, 60/50Hz to 12VDC, 1.5A, ferrules, with US/EU/UK plug adapters(included)
WM04 Indoor wall bracket
HSG01 Housing, fixed camera
HSG02 Housing, fixed camera, heater/blower, 24 VAC
HSG03 Housing, fixed camera, IR illuminator, heater/blower, 24 VAC
HSG02LV Housing, fixed camera, heater/blower, 90-230VAC
HSG03LV Housing, fixed camera, IR illuminator, heater/blower, 90-230VAC
HSG/WALL Bracket, wall
HSG/POLE Bracket, pole
HSG/CORNER Bracket, corner
HSG/CEILING Bracket, ceiling
HSG/SUN Sunshield for fixed camera housing
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.3 - Subject to modification.
Technical SpecificationsBC820H1
Description
The Siqura® BC820M1IR is an HD bullet camera with built in IRillumination providing clear images under any lighting condition.With its cable-managed bracket, IP67 construction and motorisedlens, installation is fast and easy and remote adjustment issimple.
Multistream high definitionThe BC820M1IR series cameras have dual-stream capability forsimultaneous streaming of H.264/H.264 or H.264/MJPEG. FullHD 1080p streaming with a D1 second stream or dual 720pstreams is possible. Multiple combinations of resolution andframe rate can be configured to satisfy different live viewing andrecording scenarios.
Open standardsMultiple options are available to easily integrate the BC820M1IRto a video management system. In support of open standards,the BC820M1IR is compliant with both the ONVIF specificationand Siqura's Open Streaming Architecture (OSA) HTTP API.
Day/night, backlight compensation, and wide dynamicrangeThe BC820M1IR provides automatic day/night functionality, foruse in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Power source choicesThe BC820M1IR can be powered by 12VDC or 24VAC (terminalblock) or over the network with 802.3af-compliant PoE sources.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
BL820M1IRFull HD IR Bullet IP Camera
Features
• 1/2.7” progressive scan CMOS imager
• Full HD 1080p resolution
• H.264 and MJPEG compression
• Two-way audio
• 3-9mm motorised varifocal lens
• Built-in IR illuminator (effective distance: 25m)
• Day/night with IR-cut filter
• 5 privacy masks
• Micro SD support
• Sunshield and cable management
• ONVIF-compliant
x5
x1/x1
CameraImage sensor 1/2.7” progressive scan CMOS
Effective pixels 1920(H) x 1080(V)
Shutter speed 1~1/10000 sec.
Signal-to-noise ratio >40dB
Lens 3.0 - 9.0mm
Lens type Varifocal/motorized lens F1.2/ f=3-9 mm
Minimum scene illumination 0.2lux colour, 0.02lux (b/w), F1.2; 0lux with IR
FOV (16:9) 103.5°(w) ~ 34.3°(t)
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Saturation Manual
Hue Manual
Brightness Manual
Exposure Auto/manual
Contrast Manual
Sharpness Manual
Noise reduction Off, 3D (low, medium, high), SPQ (Smart Picture Quality), SPQ + 3D (3 levels)
Motion detection On/off
Digital zoom Yes
Day/night (IR-cut filter) Auto/on/off
www.tkhsecurity.com
Technical SpecificationsBL820M1IR
FunctionsPrivacy masks 5
Video motion detection On/off
Tamper monitoring On/off
ICR Auto/on/off
VideoNumber of video streams 2x H.264 or H.264/MJPEG
Compression algorithm(s) H.264 MP (ISO/IEC 14496-10), MJPEG
Supported resolutions 1080p (1920x1080); 720p (1280x720); 1024x768; 800x600; D1 (720x480); CIF(352x240)
TV systems NTSC, PAL
Maximum streaming capabilities
Stream 1 H.264 1080p (25/30 fps) + MJPEG D1 (25/30 fps)
Stream 2 H.264 1080p (25/30 fps) + H.264 D1 (25/30 fps)
Analog output BNC (1 Vpp)
NetworkInterface(s) 10/100 Ethernet (RJ-45)
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP,PPPoE, UPnP, IGMP, SNMP, IEEE 802.1x, QoS, ONVIF
Password levels User and administrator
Supported browsers Internet Explorer (6.0+), Chrome, Firefox, Safari
Security HTTPS, IP Filter, IEEE 802.1X
User accounts 20
AudioTwo-way audio Line out, line in/mic in (jack Ø3.5 mm)
Compression G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
Contact closuresInput 5V 10kΩ pull-up
Output Photo relay output 300VDC/AC
Operational modes Normally open; normally closed
Connector type 4-pin terminal block, pitch 3.5mm
StorageStorage options Micro SD card, 32 GB
PoweringPower consumption System: 5W (built-in IR illuminator: +3W, motorized lens: +3.6W, heater: +12W)
Power 24 VAC/12VDC/802.3at PoE+
www.tkhsecurity.com
Technical SpecificationsBL820M1IR
EnvironmentalOperating temperature -10 °C to +50 °C (+14 °F to +122 °F)
w/Heater, powered by DC12V/AC24V: -35°C ~ 50°C (-31° ~ 122° F)
Relative humidity 10% to 90%, no condensation
MechanicalDimensions Ø 84 x 180mm (Ø 3.3 x 7.1in)
with sunshield: Ø 84 x 193mm (Ø 3.3 x 7.6in)
Weight 0.94kg (2.07lbs)
Colour RAL 9003 (signal white)
Built-in IR illuminator
Working distance up to 25m
Wavelength 850nm
Number of LEDs 23
Connectors
Ethernet RJ-45
Micro SD Micro SD card, 32 GB
Audio out Female stereo phone jack, ø 3.5mm
Mic in / Line in Female stereo phone jack, ø 3.5mm
Alarm input / Alarm output 4-pin alarm wires
Analog output 1 Vpp 75Ω BNC (gold-plated center pin)
Ordering informationModels Description
Siqura BL820M1IR Network bullet camera, 1080p CMOS, 3x motorised zoom, H.264/MJPEG, built-in IR
PA01 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 1.5A, indoor
PA02 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 3.0A, indoor
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PA03 /US Power supply,110VAC to 24VAC ,tinned leads, 3.0A, outdoor (IP66)
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsBL820M1IR
Description
The Siqura® FD820 is a 1080p fixed-dome network camera in avandal-resistant housing. The modular snap-in chassis andmotorised lens makes the FD820 the easiest dome camera toinstal, for both indoor and outdoor applications.
Multistream high definitionThe FD820 series cameras have dual-stream capability forsimultaneous streaming of H.264/H.264 or H.264/MJPEG. FullHD 1080p streaming with a D1 second stream or dual 720pstreams is possible. Multiple combinations of resolution andframe rate can be configured to satisfy different live viewing andrecording scenarios.
Open standardsMultiple options are available to easily integrate the FD820 to avideo management system. In support of open standards, theFD820 is compliant with both the ONVIF specification andSiqura's Open Streaming Architecture (OSA) HTTP API.
Day/night, backlight compensation, and wide dynamicrangeThe FD820 provides automatic day/night functionality, for use inlow light situations. Backlight compensation enhances imagevisibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Power source choicesThe FD820 can be powered by 12VDC or 24VAC (terminal block)or over the network with 802.3af-compliant PoE sources.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
FD820High Definition Fixed-Dome Camera with D/N
Features
• Multiple resolutions: 1080p/720p
• 1/2.7” progressive scan CMOS imager
• Dual-stream H.264 and MJPEG video
• ONVIF-compliant
• Two-way audio
• Day/night with IR-cut filter
• Optional IR illuminator (effective distance: 25m)
• 3.0 - 9mm Varifocal, motorized lens
• IP66 ingress rating
• 24VAC/12VDC/802.3af PoE
• Contact closures (alarms) - 1 output, 1 input
x5
x1/x1
CameraImage sensor 1/2.7". progressive scan 1080p CMOS
Pixel count 1920(H) x 1080(V)
Shutter speed 1- 1/10000 sec
Signal-to-noise ratio >40dB
Lens 3.0 - 9.0mm, F1.2
Lens type DC auto iris, motorised zoom, focus
Minimum scene illumination 0.6 lux colour, 0.2lux (b/w) at F1.2
Horizontal field of view 103.5°(w) ~ 34.3°(t)
Analog output BNC (1 Vpp)
Image controlWide dynamic range On/off
WDR value 69 dB
Backlight compensation On/off
White balance Auto/manual
Brightness Manual
Saturation Manual
Exposure Auto/manual
Contrast Manual
Sharpness Manual
Hue Manual
Noise reduction 2D/3D
Automatic gain control Auto
Digital zoom Yes
www.tkhsecurity.com
Technical SpecificationsFD820
FunctionsPrivacy masks 5
Image rotation Flip, mirror,90° (clockwise, counterclockwise), and 180° rotate
On-screen display Date, time, and title (20 characters)
Local recording Continuous, scheduled, alarm
Video motion detection On/off (10 zones)
Tamper monitoring Blocked/moved image
NetworkInterface(s) 10/100 Ethernet (RJ-45)
Protocols TCP/IP, UDP, RTP, RTSP, HTTP, ICMP, FTP, SMTP, DHCP, NTP, PPPoE, UPnP,IGMP, SNMP, 802.1x, HTTPS and IPv4/v6
Password levels User and administrator
Supported browsers Internet Explorer (6.0+), Chrome, Firefox, Safari
User accounts 20
VideoNumber of video streams 2x H.264 or H.264/MJPEG
Frame rate 1 to 30 fps (NTSC)/ 1 to 25fps (PAL)
Compression algorithm(s) H.264 MP (ISO/IEC 14496-10); MJPEG
Supported resolutions 1080p (1920x1080); 720p (1280x720); 1024x768; 800x600; D1 (720x480); CIF(352x240)
Video formats NTSC, PAL
Maximum streaming capabilities
Stream 1 H.264 - 1080p30H.264 - 1080p15H.264 - 720p30MJPEG - 1080p30
Stream 2 H.264- D1 30fpsMJPEG- D1 30fpsH.264 - 1080p15MJPEG- 1080p15H.264 - 720p30H.264 - 720p30MJPEG- 720p30
AudioCompression G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
Contact closuresInput 5V 10kΩ pull-up
Output Photocoupler transistor output
Connector type 4-pin terminal block, pitch 3.5mm
StorageStorage options Micro SD card, 32 GB
www.tkhsecurity.com
Technical SpecificationsFD820
PoweringPower consumption 5.5W, 12W with heater/fan (+3.6W for IR option)
Power 24 VAC/12VDC/802.3at PoE+
Power connector 3-pin terminal block
Power adapter (included) 110-230VAC to 12VDC, 1.5A 50/60Hz
EnvironmentalOperating temperature (12VDC/24VAC) -40°C to +50°C (-40°F to +122°F)
Operating temperature (PoE) -30 °C to +50 °C (-22 °F to +122 °F)
Operating temperature -IR model (PoE) -10 °C to +50 °C (+14 °F to +122 °F)
Relative humidity 10% to 90%, no condensation
MechanicalDimensions Ø151.4 x 130mm (Ø5.96 x 5.14in)
Weight 1kg (2.2lbs)
Colour RAL 9003 (signal white)
Connector types RJ-45, BNC
Built-in IR illuminator (optional)
Working distance up to 25m
Wavelength 850nm
Number of LEDs 23
Ordering informationModels Description
FD820 M1 Network fixed dome camera, 1080p CMOS, H.264/MJPEG, motorised lens, IP66
FD820 M1IR Network fixed dome camera, 1080p CMOS, H.264/MJPEG, motorised lens, IR, IP66
WM02/FD6 Tube adapter/pendant mount for FD6x/82x-series, indoor/outdoor
CM06 Flush mount kit for FD6x/82x-series
DC16FD Smoked bubble accessory, FD6x/82x series
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsFD820
Description
The Siqura® IFD820 is a 1080p indoor fixed-dome networkcamera. The IFD820‘s modular snap-in chassis makes installationsimple, and the built in IR illumination provides for clear imagesunder any lighting condition.
Multistream high definitionThe IFD820 series cameras have dual-stream capability forsimultaneous streaming of H.264/H.264 or H.264/MJPEG. FullHD 1080p streaming with a D1 second stream or dual 720pstreams is possible. Multiple combinations of resolution andframe rate can be configured to satisfy different live viewing andrecording scenarios.
Open standardsMultiple options are available to easily integrate the IFD820 to avideo management system. In support of open standards, theIFD820 is compliant with both the ONVIF specification andSiqura's Open Streaming Architecture (OSA) HTTP API.
Day/night, backlight compensation, and wide dynamicrangeThe IFD820 provides automatic day/night functionality, for use inlow light situations. Backlight compensation enhances imagevisibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Power source choicesThe IFD820 can be powered by 12VDC or 24VAC (terminal block)or over the network with 802.3af-compliant PoE sources.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
IFD820High Definition Indoor Fixed-Dome Camera with D/N
Features
• Multiple resolutions: 1080p/720p
• 1/2.7” progressive scan CMOS imager
• Dual-stream H.264 and MJPEG video
• ONVIF-compliant
• Two-way audio
• Day/night with IR-cut filter
• 1 IR illuminator (effective distance: 25m)
• 3.0 - 9mm varifocal lens
• 24VAC/12VDC/802.3af PoE
• Contact closures (alarms) - 1 output, 1 input
x5
x1/x1
CameraImage sensor 1/2.7" progressive scan 1080p CMOS
Pixel count 1920(H) x 1080(V)
Shutter speed 1- 1/10000 sec
Lens 3.0 - 9.0mm, F1.2
Lens type DC auto iris, manual zoom, focus
Minimum scene illumination 0.6 lux colour, 0.2lux (b/w) at F1.2
Signal-to-noise ratio >40dB
Horizontal field of view 103.5°(W) ~ 34.3°(T)
Analog output BNC (1 Vpp)
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Saturation Manual
Brightness Manual
Exposure Auto/manual
Contrast Manual
Sharpness Manual
Hue Manual
Noise reduction 2D/3D
Automatic gain control Auto
Motion detection On/off (10 zones)
Digital zoom Yes
www.tkhsecurity.com
Technical SpecificationsIFD820
FunctionsPrivacy masks 5
Image rotation Normal, flip, mirror, 90° (clockwise, counterclockwise), and 180° rotate
On-screen display Date, time, and title (20 characters)
Local recording Continuous, scheduled, alarm
Tamper monitoring Blocked/moved image
VideoCompression algorithm(s) H.264 main profile/MJPEG
NetworkInterface(s) 10/100 Ethernet (RJ-45)
Protocols TCP/IP, UDP, RTP, RTSP, HTTP, ICMP, FTP, SMTP, DHCP, NTP, PPPoE, UPnP,IGMP, SNMP, 802.1x, HTTPS and IPv4/v6
Password levels User and administrator
Supported browsers Internet Explorer (6.0+), Chrome, Firefox, Safari
User accounts 20
AudioCompression G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
Contact closuresInput 5V 10kΩ pull-up
Output Photocoupler transistor output
Connector type 4-pin terminal block, pitch 3.5mm
StorageStorage options Micro SD card, 32 GB
PoweringPower consumption 5.0W; 8.0W with IR on
Power 24 VAC/12VDC/802.3af PoE
Power connector 3-pin terminal block
Power adapter (included) 110-230VAC to 12VDC, 1.5A 50/60Hz
EnvironmentalOperating temperature (12VDC/24VAC) -10 °C to +50 °C (+14 °F to +122 °F)
Relative humidity 10% to 90%, no condensation
www.tkhsecurity.com
Technical SpecificationsIFD820
MechanicalDimensions Ø149 x 131mm (Ø5.9 x 5.2in)
Weight 0.7kg (1.5lbs)
Colour RAL 9003 (signal white)
Connector type RJ-45, BNC
Built-in IR illuminator
Working distance up to 25m
Wavelength 850nm
Number of LEDs 23
Ordering informationModels Description
IFD820V1IR Network fixed dome camera, 1080p CMOS, H.264/MJPEG, 3-9mm varifocal lens, IR
WM02/FD6 Tube adapter/pendant mount for FD6x/82x-series, indoor/outdoor
CM06 Flush mount kit for FD6x/82x-series
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsIFD820
Description
The Siqura® CD820F1 is a mini IP fixed-dome camera in animpact-resistant ruggedised dome housing with an integratedlens providing high resolution pictures. It is an aestheticallypleasing compact fixed camera, specially designed for indoorand outdoor applications that require a small footprint.
Multistream high definitionThe CD820F1 has dual-stream capability for simultaneousstreaming of H.264 and MJPEG video. The CD820F1 can providedual streaming 720p full frame rate high definition (HD) videowith both H.264 and MJPEG streams simultaneously or a singlestream 1080p in either H.264 or MJPEG. Multiple combinationsof resolution and frame rate can be configured to satisfy differentlive viewing and recording scenarios.
Open standardsMultiple options are available to easily integrate the CD820F1 toa video management system. In support of open standards, theCD820F1 is compliant with both the ONVIF specification andSiqura's Open Streaming Architecture (OSA) HTTP API.
Power sourceThe CD820F1 camera can be powered by 12 VDC or over thenetwork with 802.3af-compliant PoE sources.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
CD820F1Compact network fixed-dome camera
Features
• Multiple resolutions: 1080p/720p
• 1/2.7” progressive scan CMOS imager
• Dual-stream H.264 and MJPEG video
• ONVIF-compliant
• Audio - mic input
• 4mm fixed lens
• Compact surface mount design
• Ruggedised construction
• 802.3af Power-over-Ethernet/12 VDC
• IP66 ingress rating
2
CameraImage sensor 1/2.7” CMOS (1920 x 1080 pixels)
Compression algorithm(s) Dual H.264, H.264/MJPEG
Progressive scan Yes
Resolution/frame rate
Single stream H.264 1920 x 1080 at 30 fps
Single stream MJPEG 1920 x 1080 at 30 fps
Dual stream H.264 720p at 30 fps 720p + D1/CIF at 30 fps
Dual stream MJPEG 720p/D1/CIF at 30 fps
Shutter speed 1~1/10000 s
Lens mount 4 mm fixed, F1.5
Lens type Fixed iris
Minimum scene illumination 0.1 lux colour
Signal-to-noise ratio >40 dB
Image controlWhite balance Auto/manual
Brightness Manual
Saturation Manual
Exposure Auto/manual
Contrast Manual
Sharpness Manual
Hue Manual
Automatic gain control Auto
AudioMic input Unidirectional
Compression G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
www.tkhsecurity.com
Technical SpecificationsCD820F1
FunctionsPrivacy masks 2
Image rotation Normal, flip, mirror, and 180° rotate
On-screen display Date, time, and title (20 characters)
Local recording Continuous, scheduled, alarm
Video motion detection Off, low, high
NetworkInterface(s) 10/100 Ethernet (RJ-45)
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP,PPPoE, UPnP, SNMP, QoS, IGMP, and ONVIF
Password levels User and administrator
Supported browsers Internet Explorer (6.0+), Chrome, Firefox, Safari
User accounts 20
StorageStorage options Micro SD card, 32 GB
PoweringPower consumption 3.8 W
Power 802.3af Power-over-Ethernet/12 VDC
Power connector RJ-45/4-pin DIN connector
EnvironmentalOperating temperature -10 °C to +50 °C (+14 °F to +122 °F)
Relative humidity 10% to 90%, no condensation
Ingress protection IP66
Impact rating IK10
MechanicalDimensions Ø117 x 50 mm (Ø4.60 x 2.0 in)
Weight 180 g (0.40 lb)
Colour RAL 9003 (signal white)
Connector type IP66 rated RJ-45 and 4-pin circular DIN on 0.5 m harness
Bubble Polycarbonate
Cover ABS/polycarbonate blend
Mount Surface mount
Ordering informationModels Description
CD820F1 Network fixed dome camera, compact, indoor/outdoor, 1080p, H.264/MJPEG
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsCD820F1
Description
The Siqura® CD820F2 is a mini IP fixed-dome camera in animpact-resistant ruggedised dome housing with an integratedlens providing high resolution pictures. It is an aestheticallypleasing compact fixed camera, specially designed for indoorand outdoor applications that require a small footprint.
Multistream high definitionThe CD820F2 has dual-stream capability for simultaneousstreaming of H.264 and MJPEG video. The CD820F2 can providedual streaming 720p full frame rate high definition (HD) videowith both H.264 and MJPEG streams simultaneously or a singlestream 1080p in either H.264 or MJPEG. Multiple combinationsof resolution and frame rate can be configured to satisfy differentlive viewing and recording scenarios.
Open standardsMultiple options are available to easily integrate the CD820F2 toa video management system. In support of open standards, theCD820F2 is compliant with both the ONVIF specification andSiqura's Open Streaming Architecture (OSA) HTTP API.
Power sourceThe CD820F2 camera can be powered by 12 VDC or over thenetwork with 802.3af-compliant PoE sources.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
CD820F2Compact network fixed-dome camera
Features
• Multiple resolutions: 1080p/720p
• 1/2.7” progressive scan CMOS imager
• Dual-stream H.264 and MJPEG video
• ONVIF-compliant
• Audio - mic input
• 2.8 mm fixed lens
• Compact surface mount design
• Ruggedised construction
• 802.3af Power-over-Ethernet/12 VDC
• IP66 ingress rating
2
CameraImage sensor 1/2.7” CMOS (1920 x 1080 pixels)
Compression algorithm(s) Dual H.264, H.264/MJPEG
Progressive scan Yes
Resolution/frame rate
Single stream H.264 1920 x 1080 at 30 fps
Single stream MJPEG 1920 x 1080 at 30 fps
Dual stream H.264 720p at 30fps 720p + D1/CIF at 30 fps
Dual stream MJPEG 720p/D1/CIF at 30 fps
Shutter speed 1~1/10000 s
Lens mount 2.8 mm fixed, F2.0
Lens type Fixed iris
Minimum scene illumination 0.1 lux colour
Signal-to-noise ratio >40 dB
Image controlWhite balance Auto/manual
Brightness Manual
Saturation Manual
Exposure Auto/manual
Contrast Manual
Sharpness Manual
Hue Manual
Automatic gain control Auto
AudioMic input Unidirectional
Compression G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
www.tkhsecurity.com
Technical SpecificationsCD820F2
FunctionsPrivacy masks 2
Image rotation Normal, flip, mirror, and 180° rotate
On-screen display Date, time, and title (20 characters)
Local recording Continuous, scheduled, alarm
Video motion detection Off, low, high
NetworkInterface(s) 10/100 Ethernet (RJ-45)
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP,PPPoE, UPnP, SNMP, QoS, IGMP, and ONVIF
Password levels User and administrator
Supported browsers Internet Explorer (6.0+), Chrome, Firefox, Safari
User accounts 20
StorageStorage options Micro SD card, 32 GB
PoweringPower consumption 3.8 W
Power 802.3af Power-over-Ethernet/12 VDC
Power connector RJ-45/4-pin DIN connector
EnvironmentalOperating temperature -10 °C to +50 °C (+14 °F to +122 °F)
Relative humidity 10% to 90%, no condensation
Ingress protection IP66
Impact rating IK10
MechanicalDimensions Ø117 x 50 mm (Ø4.60 x 2.0 in)
Weight 180 g (0.40 lb)
Colour RAL 9003 (signal white)
Connector type IP66 rated RJ-45 and 4-pin circular DIN on 0.5 m harness
Bubble Polycarbonate
Cover ABS/polycarbonate blend
Mount Surface mount
Ordering informationModels Description
CD820F2 Network fixed dome camera, compact, indoor/outdoor, 1080p, H.264/MJPEG
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsCD820F2
Description
The Siqura® MD10A is a compact PTZ dome camera in a vandal–resistant housing providing excellent pictures.
Mini domeThe MD10A has a 12x optical zoom lens with 12x digital zoom.The lens can move in almost any direction offering a wide viewwithout missing any details. Precision 300° per second pan andtilt drive technology offers almost instant preset positioning.
Vandal-resistant housingThe MD10A is made for indoor applications and is made vandal-resistant by using a robust housing.
Day/night and backlight compensationThe MD10A is provided with an automatic day/nightfunctionality, which is used in low light situations and backlightcompensation functionality for use in different scenes. Thismeans that the MD10A provides a clear picture for the operator,no matter what the lighting situation is.
MD10AMini PTZ Dome with Day/Night (Indoor)
Features
• Vandal-resistant indoor mini PTZ dome
• 12x optical zoom/12x digital zoom
• Day/night with IR-cut filter
• Backlight compensation
• 300°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• 16 privacy masks
• Contact closures (alarms) - 8 input, 1 output
16
x8/x1
CameraImage sensor 1/4” EXview CCD
Image resolution - horizontal 540TVL
Effective pixels (PAL/NTSC) 380k/440k
Electronic shutter 1~1/10ks.
Synchronisation Internal
Signal-to-noise ratio >50dB (AGC off)
Video output 1 Vpp/75Ω BNC (gold-plated center pin)
Minimum scene illumination 0.1 lux colour, 0.01 lux (b/w)
Focal length 3.8-45.6mm
Focus mode Auto/manual
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Optical zoom 12x
Digital zoom 12x
FunctionsPrivacy masks 16
www.tkhsecurity.com
Technical SpecificationsMD10A
Pan / TiltPan travel 360° continuous
Tilt travel 0°~180°
Preset speed 300°/s
Manual speed 0.5°/s
Presets 256 presets
Preset accuracy 0.225°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Mechanical/off
NetworkPTZ control interface(s) RS-485
PTZ control protocols Pelco-D (bidirectional), Pelco-P, Kalatel, Philips, AD422
Contact closuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 14W
Power 24 VAC (+/- 20%)
EnvironmentalOperating temperature 0°C to +40°C (+32°F to +104°F)
MechanicalDimensions Ø133 x 172.8mm (Ø5.2 x 6.8in)
Weight 1.2kg (2.7lbs)
Colour RAL 9003 (signal white)
www.tkhsecurity.com
Technical SpecificationsMD10A
Ordering informationModels Description
MD10A/N Mini PTZ Dome, day/night, vandal-resistant
MD10A/P Mini PTZ Dome, day/night, vandal-resistant
PA01 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 1.5A, indoor
PA02 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 3.0A, indoor
CM01 Straight tube 25cm
CM02 Straight tube 50cm
CM03 /HD Hard ceiling mount indoor HD and MD10A/HSD and MSD620
CM04 /MD Flush mount indoor MD10A/620 series
WM01A/MD Mini wall mount for MD series
WM02/HD Tube adapter for indoor MD10x/620 and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsMD10A
Description
The Siqura® MD12A is a compact PTZ dome camera in a vandal-resistant housing providing excellent pictures.
Mini domeThe MD12A has a 12x optical zoom lens with 12x digital zoom.The lens can move in almost any direction offering a wide viewwithout missing any details. Precision 300° per second pan andtilt drive technology offers almost instant preset positioning.
Day/night and backlight compensationThe MD12A is provided with an automatic day/nightfunctionality, which is used in low light situations and backlightcompensation functionality for use in different scenes. Thismeans that the MD12A provides a clear picture for the operator,no matter what the lighting situation is.
Vandal-resistant housing with integrated varifocal lensThis fixed-dome camera is suited for indoor and outdoorapplications, even in severe environments. The MD12A is madevandal-resistant by using a robust housing and security Torx®
screws.
MD12AVandal-Resistant Mini PTZ Dome with D/N (Outdoor)
Features
• 12x optical zoom/12x digital zoom
• Day/night with IR-cut filter
• Backlight compensation
• 300°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• 16 privacy masks
• Contact closures (alarms) - 8 input, 1 output
• IP66 ingress rating
• Polycarbonate bubble
• 24VAC
16
x8/x1
CameraImage sensor 1/4” EXview CCD
Image resolution - horizontal 540TVL
Effective pixels (PAL/NTSC) 380k/440k
Electronic shutter 1~1/10ks.
Video output 1 Vpp, 75Ω BNC (gold-plated center pin)
Signal-to-noise ratio >50dB (AGC off)
Minimum scene illumination 0.1 lux colour, 0.01 lux (b/w)
Synchronisation system Internal
Focal length 3.8-45.6mm
Focus mode Auto/manual
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Digital zoom 12x
Optical zoom 12x
FunctionsPrivacy masks 16
ControlsPTZ control interface(s) RS-485
PTZ control protocols Pelco-D (bidirectional), Pelco-P, Kalatel, Philips, AD422
www.tkhsecurity.com
Technical SpecificationsMD12A
Pan / TiltPan travel 360° continuous
Tilt travel 0°~180°
Preset speed 300°/s
Manual speed 0.5°/s
Presets 256 presets
Preset accuracy 0.225°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Mechanical/off
Contact closuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 52W (with heater)
Power 24 VAC (+/- 20%)
EnvironmentalOperating temperature -30°C to +45°C (-22°F to +113°F)
MechanicalDimensions Ø190 x 260mm (Ø7.5 x 10.2in) (with sunshield)
Weight 1.2kg (2.7lbs)
Colour RAL 9003 (signal white)
www.tkhsecurity.com
Technical SpecificationsMD12A
Ordering informationModels Description
MD12A/N Mini PTZ Dome, day/night, vandal-resistant, IP66
MD12A/P Mini PTZ Dome, day/night, vandal-resistant, IP66
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
WM01A/MD Mini wall mount for MD series
WM02/MD Tube adapter for outdoor MD- and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsMD12A
Description
The Siqura® MSD620 is an indoor PTZ dome camera withexceptional imaging controls to provide excellent pictures evenin the most difficult circumstances.
Mini domeThe MSD620 has a 12x optical zoom lens with 12x digital zoom.The lens can move in almost any direction offering a wide viewwithout missing any details. Precision 300° per second pan andtilt drive technology offers almost instant preset positioning.
Image quality monitor and tampering alarmThe MSD620 is fitted with video analytics to check the health ofthe camera. This image quality monitor analyzes contrast,exposure, sharpness and noise. Camera tampering analyticsdetect any changes in the camera’s position or field of view. Theinstant a camera is subject to failure or tampering, an alert can beraised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the MSD620 provides all the interfacesnecessary for any IP CCTV application. The MSD620 is a hybridsolution and can provide local video for a public view monitor orlocal DVR.
Open Streaming Architecture (OSA)The MSD620 is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.The MSD620 also supports the unique Siqura® MX™ protocol.
Multistream/multicodecThe versatile MSD620 is capable of quad streaming, with dual H.264 streams simultaneous with two flexible encoding outputswhich can provide MPEG-2, MPEG-4 or MJPEG streams. Eachstream is optimised for its purpose. The H.264 implementation isbased on dedicated hardware resulting in unparalleled videoquality.
MSD620IP Mini PTZ Dome with Day/Night, WDR (Indoor)
Features
• Quad-stream support of dual H.264, MPEG-2, MPEG-4,MJPEG
• Image quality monitor and tamper detector
• 12x optical zoom/12x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• 300°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• Two-way audio, digital I/O
• 16 privacy masks
• Analog output
16
x8/x1
Day/night, backlight compensation, and wide dynamicrangeThe MSD620 provides automatic day/night functionality, for usein low light situations. Backlight compensation enhances imagevisibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Technical Specifications
CameraImage sensor 1/4” EXview CCD
Image resolutions PAL/NTSC
D1 720x480/720x576
½D1 352x480/352x576
2CIF 720x240/720x288
CIF 352x240/352x288
QCIF 176x120/176x144
Image resolution - horizontal 540TVL
Effective pixels (PAL/NTSC) 380k/440k
Electronic shutter 1/1~1/10 sec.
Synchronisation system Internal
Video output 1 Vpp, 75Ω BNC (gold-plated center pin)
Minimum scene illumination 0.1 lux colour, 0.01 lux (b/w)
Focal length 3.8~45.6mm
Focus mode Auto/manual
www.tkhsecurity.com
MSD620
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual/indoor
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital zoom 12x
Optical zoom 12x
FunctionsPrivacy masks 8
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
PTZ coordinate data Via API or Pelco-D (set/get)
VideoNumber of video streams 2x H.264, 2x MPEG-4, MPEG-2, and/or MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264 BP (ISO/IEC 14496-10), MJPEG, MPEG-4 SP layer 5, (ISO/IEC 14496-2),MPEG-2 (ISO/IEC 13818-2)
Types of streaming UDP/IP (multicast and/or unicast) TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Encoding latency <130ms
GOP structure I, IP selectable
Quad streaming 2x D1 at 30fps H.264 + D1 at 30fps MPEG-4 + CIF at 1fps MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
Live-view encoder HTTP, FTP pull
NetworkInterface(s) RJ-45
Protocols H.264 BP, MPEG-4 ES, MPEG-2, (M)JPEG, RTP, RTCP, RTSP, TCP, UDP, IP,DHCP, IGMPv2, (S)NTP, MX/IP, HTTP, SNMPv2, FTP, TelNet, DiffServ, SAP, UPnP
Management and control SNMP v2, MX™, HTTP API v1.30, HTML (password protected)
AudioTwo-way audio Line out, line in/mic in (jack Ø3.5 mm)
Number of channels 1 (mono, full-duplex)
Number of streams 3 multicast and/or unicast
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ (600Ω balanced)
Output impedance <100Ω (balanced)
www.tkhsecurity.com
Technical SpecificationsMSD620
Contact closuresNumber of channels 8x in, 1x out
Number of streams 2 x 3 multicast and/or unicast
Reactions Preset, sequence, auto pan, cruise
StorageStorage options Micro SD card, 32 GB
PoweringPower consumption 21W
Power 19.2- 28.8VAC, 24 VAC nominal
EnvironmentalOperating temperature 0°C to +40°C (+32°F to +104°F)
MechanicalDimensions Ø133 x 173mm (Ø5.2 x 6.8in)
Weight 1.2kg (2.7lbs)
Housing Aluminium
Colour RAL 9003 (signal white)
Bubble Optically clear polycarbonate
Ordering informationModels Description
MSD620 /N Mini network indoor PTZ dome, day/night, vandal-resistant
MSD620 /P Mini network indoor PTZ dome, day/night, vandal-resistant
PA01 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 1.5A, indoor
PA02 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 3.0A, indoor
CM01 Straight tube 25cm
CM02 Straight tube 50cm
CM03 /HD* Hard ceiling mount indoor HD and MD10A/HSD and MSD620
CM04 /MD Flush mount indoor MD10A/620 series
WM01A/MD Mini wall mount for MD series
WM02/HD Tube adapter for indoor MD10x/620 and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
PTM01 1-1/2” pipe thread adapter
* CM03/MD included with each indoor unit
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsMSD620
Description
The Siqura® MSD622 is a compact network PTZ dome camera ina weather- and vandal-resistant housing which provides highspeed performance and superior encoding technology.
Mini domeThe MSD622 has a 12x optical zoom lens with 12x digital zoom.The lens can move in almost any direction offering a wide viewwithout missing any details. Precision 300° per second pan andtilt drive technology offers almost instant preset positioning.
Image quality monitor and tampering alarmThe MSD622 is fitted with video analytics to check the health ofthe camera. This image quality monitor analyzes contrast,exposure, sharpness and noise. Camera tampering analyticsdetect any changes in the camera’s position or field of view. Theinstant a camera is subject to failure or tampering, an alert can beraised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
Open Streaming Architecture (OSA)The MSD622 is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.The MSD622 also supports the unique Siqura® MX™ protocol.
Multistream/multicodecThe versatile MSD622 is capable of quad streaming, with dual H.264 streams simultaneous with two flexible encoding outputswhich can provide MPEG-2, MPEG-4 or MJPEG streams. Eachstream is optimised for its purpose. The H.264 implementation isbased on dedicated hardware resulting in unparalleled videoquality.
Day/night, backlight compensation, and wide dynamicrangeThe MSD622 provides automatic day/night functionality, for usein low light situations. Backlight compensation enhances imagevisibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
MSD622IP Mini PTZ Dome with Day/Night (Outdoor)
Features
• Quad-stream support of dual H.264, MPEG-2, MPEG-4,MJPEG
• Image quality monitor and tamper detector
• 12x optical zoom/12x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• 300°/second preset targeting
• 360 degree continuous rotation
• 256 presets/1 programmable cruise
• Two-way audio; digital I/O
• IP66 ingress rating
• Analog output/optical output options
16
x8/x1
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the MSD622 provides all the interfacesnecessary for any IP CCTV application. The MSD622 is a hybridsolution and can provide local video for a public view monitor orlocal DVR.
Technical Specifications
CameraImage sensor 1/4” EXview CCD
Image resolution - horizontal 540TVL
Streaming capabilities
D1 720x480 (NTSC)/720x576 (PAL)
½D1 352x480 (NTSC)/352x576 (PAL)
2CIF 720x240 (NTSC)/720x288 (PAL)
CIF 352x240 (NTSC)/352x288 (PAL)
QCIF 176x120 (NTSC)/176x144 (PAL)
Synchronisation system Internal
Effective pixels 380k (NTSC)/440k (PAL)
Shutter 1/1~1/10 sec. 1/1~1/10 sec.
Video output 1 Vpp, 75Ω BNC (gold-plated center pin)
Minimum scene illumination 0.1 lux colour, 0.01 lux (b/w)
Focal length 3.8~45.6mm
Focus mode Auto/manual
www.tkhsecurity.com
MSD622
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual; indoor/outdoor
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Motion detection Yes (user-defined masking)
Digital zoom 12 x
FunctionsPrivacy masks 16
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
Live-view encoder HTTP, FTP pull
VideoNumber of video streams 2x H.264, 2x MPEG-4, MPEG-2, and/or MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264 BP (ISO/IEC 14496-10), MJPEG, MPEG-4 SP layer 5, (ISO/IEC 14496-2),MPEG-2 (ISO/IEC 13818-2)
Types of streaming UDP/IP (multicast and/or unicast) TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Encoding latency <130ms
GOP structure I, IP selectable
Quad streaming 2x D1 at 30fps H.264 + D1 at 30fps MPEG-4 + CIF at 1fps MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
NetworkInterface(s) RJ-45
Protocols H.264 BP, MPEG-4 ES, MPEG-2, (M)JPEG, RTP, RTCP, RTSP, TCP, UDP, IP,DHCP, IGMPv2, (S)NTP, MX/IP, HTTP, SNMPv2, FTP, TelNet, DiffServ, SAP, UPnP
Management and control SNMP v2, MX™, HTTP API v1.30, HTML (password protected)
AudioTwo-way audio Line out, line in/mic in (jack Ø3.5 mm)
Number of channels 1 (mono, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ (600Ω balanced)
Output impedance <100Ω (balanced)
www.tkhsecurity.com
Technical SpecificationsMSD622
Pan / TiltPan travel 360° continuous
Tilt travel 0°~180° default, -10°~190° maximum
Preset speed 5~300°/s
Manual speed 0.5°/s~55°/s
Presets 256 presets
Preset accuracy 0.225°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact closuresNumber of channels 8x in, 1x out
Number of streams 2 x 3 multicast and/or unicast
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 58W (with heater)
Power 24 VAC +/- 10%
EnvironmentalOperating temperature -30°C to +45°C (-22°F to +113°F)
Ingress protection IP66
Impact rating IK10
MechanicalDimensions Ø190 x 260mm (with sunshield) (Ø7.5 x 10.2in)
Weight 1.2kg (2.7lbs)
Colour RAL 9003 (signal white)
www.tkhsecurity.com
Technical SpecificationsMSD622
Ordering informationModels Description
MSD622 / N Mini network outdoor PTZ dome, day/night, vandal-resistant (NTSC)
MSD622 / P Mini network outdoor PTZ dome, day/night, vandal-resistant (PAL)
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
WM01A/MD Mini wall mount for MD series
WM02/MD Tube adapter for outdoor MD- and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsMSD622
Description
The Siqura HD10A ensures excellent pictures even under themost difficult circumstances by offering features such as day/night and digital slow shutter.
High-speed domeThe HD10A high-speed PTZ dome camera combines a 26xautofocus zoom lens with 12x digital zoom. Because the lens canmove in almost any direction (pan and tilt), this camera offers awide range of observation without missing the smallest details. Inaddition, the precision 400° per second pan and tilt drivetechnology offers almost instant preset positioning.
Day/night and digital slow shutterUnder poor light conditions, this high-speed dome automaticallybecomes infrared-sensitive by removing the IR-cut filter. Thisday/night feature ensures that even in minimal light the camerastill produces clear images. The digital slow shutter increases thecamera’s light sensitivity by delaying the shutter.
Backlight compensationIn situations where the observed object is unclear due to beingunderlit or overlit (such as in a hallway entrance with manywindows), backlight compensation improves image exposure byusing the light near the object as a reference.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
HD10APTZ Dome with Day/Night (Indoor)
Features
• 26x optical zoom/12x digital zoom
• Day/night with IR-cut filter
• Backlight compensation
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• Contact closures (alarms) 8x in/1x out
• 24 privacy masks
• Polycarbonate bubble
• 24VAC
x24
x8/x1
CameraImage sensor 1/4” EXview CCD
Resolution NTSC/PAL
Effective pixels 380k/440k
Image resolution - horizontal 530TVL
Electronic shutter 1~1/10ks.
Synchronisation system Internal/line lock
Signal-to-noise ratio >50dB (AGC off)
Video output 1 Vpp, 75Ω BNC (gold-plated center pin)
Minimum scene illumination 0.09lux colour, 0.01 lux (b/w)
Focal length 3.5~91mm
Focus mode Auto/manual
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Optical zoom 26x
Digital zoom 12x
FunctionsPrivacy masks 24
Video motion detection On/off
www.tkhsecurity.com
Technical SpecificationsHD10A
NetworkInterface(s) RS-485
Protocols Pelco-D (bidirectional), Pelco-P, Kalatel, Philips, AD422
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact closuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 20W
Power 19.2 - 28.4VAC (24 VAC nominal +/- 20%)
EnvironmentalOperating temperature 0°C to +40°C (+32°F to +104°F)
MechanicalDimensions Ø131 x 220.5mm (Ø5.2 x 8.68in)
Weight 1.6kg (3.5lbs)
Colour RAL 9003 (signal white)
www.tkhsecurity.com
Technical SpecificationsHD10A
Ordering informationModels Description
HD10A/N High-speed PTZ dome camera, day/night (NTSC)
HD10A/P High-speed PTZ dome camera, day/night (PAL)
PA01 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 1.5A, indoor
PA02 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 3.0A, indoor
CM01 Straight tube 25cm
CM02 Straight tube 50cm
CM03 /HD Hard ceiling mount indoor HD and MD10A/HSD and MSD620
CM04 /HD Flush mount, indoor HD-series
WM01A/MD Mini wall mount for MD series
WM02/HD Tube adapter for indoor MD10x/620 and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHD10A
Description
TheSiqura® HD12A ensures excellent pictures even under themost difficult circumstances by offering features like day/nightand digital slow shutter.
High-speed domeThe HD12A high-speed PTZ dome camera combines a 26xautofocus zoom lens with 12x digital zoom. Because the lens canmove in almost any direction (pan and tilt), this camera offers awide range of observation without missing the smallest details. Inaddition, the precision 400° per second pan and tilt drivetechnology offers almost instant preset positioning.
Day/night and backlight compensationThe HD12A is provided with an automatic day/night functionality,which is used in low light situations and backlight compensationfunctionality for use in different scenes. This means that theHD12A provides a clear picture for the operator, no matter whatthe lighting situation is.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
HD12APTZ dome with day/night (outdoor)
Features
• 26x optical zoom/12x digital zoom
• Day/night with IR-cut filter
• Backlight compensation
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• Contact closures (alarms) 8x in/1x out
• 24 privacy masks
• IP66 ingress rating
• 24 VAC/12VDC
24
x8/x1
CameraImage sensor 1/4” EXview CCD
Video standards NTSC/PAL
Image resolution - horizontal 530TVL
Effective pixels 380k/440k
Electronic shutter 1~1/10ks
Video output 1 Vpp/, 75Ω BNC (gold-plated center pin)
Synchronisation system Internal/line lock
Signal-to-noise ratio >50dB (AGC off)
Minimum scene illumination 0.09lux colour, 0.01 lux (b/w)
Focus mode Auto/manual
Focal length 3.5~91mm
Image ControlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Optical zoom 26 x
Digital zoom 12 x
FunctionsVideo motion detection On/off
VideoCompression algorithm(s) H.264 main profile/ MJPEG
www.tkhsecurity.com
Technical SpecificationsHD12A
NetworkInterface(s) RS-485
PTZ control protocols Pelco-D (bidirectional), Pelco-P, Kalatel, Philips, AD422
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact ClosuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 65W (with heater)
Power 19.2 - 28.4VAC (24 VAC nominal +/- 20%)
EnvironmentalOperating temperature -40°C to +50°C (-40°F to +122°F) 60°C maximum
Ingress protection IP66
MechanicalDimensions Ø190 x 302.5mm (7.5 x 11.9in)
Weight 2.6kg (5.7lbs)
Colour RAL 9003 (signal white)
www.tkhsecurity.com
Technical SpecificationsHD12A
Ordering InformationModels Description
HD12A /N High-speed PTZ dome camera,day/night, IP66, including sunshield, NTSC
HD12A /P High-speed PTZ dome camera, day/night, IP66, including sunshield, PAL
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, Outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, Outdoor (IP66)
WM01A/HD Mini wall mount for HD/HSD series
WM02/HD Tube adapter for indoor MD10x/620 and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHD12A
Description
The Siqura® HD16AWDR ensures excellent high-resolutionpictures (540 TVL) even under the most difficult circumstances byoffering features such as day/night, digital slow shutter, widedynamic range, and image stabiliser.
High-speed domeThe HD16AWDR high-speed PTZ dome camera combines a 35xautofocus zoom lens with 12x digital zoom. Precision 400° persecond pan and tilt drive technology offers almost instant presetpositioning. This camera's robust feature set includes multiplesequences, cruises, and autopan functions.
Day/night and digital slow shutterUnder poor light conditions, this high-speed dome automaticallybecomes infrared-sensitive by removing the IR-cut filter. Thisday/night feature ensures that even in minimal light the camerastill produces clear images. The digital slow shutter increases thecamera’s light sensitivity by delaying the shutter.
Backlight compensation and wide dynamic rangeIn situations where the observed object is unclear due to beingunder- or overlit (such as in a hallway entrance with manywindows), backlight compensation improves image exposure byusing the light near the object as a reference. Wide dynamicrange solves the problem of overlit images by taking the best oftwo pictures with different light references.
Image stabiliserWhen the camera is in its maximum zoom range, every smallmovement of the camera gives relatively large movement in thepicture. The image stabiliser digitally compensates thismovement for a stable picture. This feature is especially useful forpole-mounted cameras.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
HD16AWDRPTZ Dome with D/N and WDR (Outdoor)
Features
• 35x optical zoom/12x digital zoom
• Day/night with IR-cut filter
• Wide dynamic range
• Backlight compensation
• Electronic image stabilisation
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• Contact closures (alarms) 8x in/1x out
• 24VAC
x8
x8/x1
CameraImage sensor 1/4” Exview CCD
Image resolution - horizontal 540TVL
Effective pixels 380k (NTSC)/440k (PAL)
Electronic shutter 1~1/30ks.
Signal-to-noise ratio >50dB (AGC off)
Synchronisation system Internal/line lock
Minimum scene illumination 0.1 lux colour, 0.01 lux (b/w)
Video output 1 Vpp, 75Ω BNC (gold-plated center pin)
Focal length 3.4~119mm
Focus mode Auto/manual
Image controlWide dynamic range On/off
Backlight compensation On/off
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off (ratio, shutter, iris levels 0-128)
Motion detection On/off
Digital zoom 12x
Optical zoom 35x
FunctionsPrivacy masks 8 black/white/mosaic (3 levels)
Electronic image stabiliser On/off (ratio, shutter, iris levels 0-128)
www.tkhsecurity.com
Technical SpecificationsHD16AWDR
NetworkPTZ control interface(s) RS-485
PTZ control protocols Pelco-D (bidirectional), Pelco-P, Kalatel, Philips, AD422
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact closuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 65W (with heater)
Power 19.2 - 28.4VAC (24 VAC nominal +/- 20%)
EnvironmentalOperating temperature -45 °C to +50 °C (-49 °F to +122 °F); 60°C maximum
Ingress protection IP66
MechanicalDimensions Ø190 x 302.5mm (7.5 x 11.9in)
Weight 2.6kg (5.7lbs)
Colour RAL 9003 (signal white)
www.tkhsecurity.com
Technical SpecificationsHD16AWDR
Ordering informationModels Description
HD16AWDR/N High-speed PTZ dome camera, wide dynamic range, day/night, IP66, including sunshield (NTSC)
HD16AWDR/P High-speed PTZ dome camera, wide dynamic range, day/night, IP66, including sunshield (PAL)
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PA03 /US Power supply,110VAC to 24VAC tinned leads, 3.0A, outdoor (IP66)
WM01A/HD Mini wall mount for HD/HSD series
WM02/HD Tube adapter for indoor MD10x/620 and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHD16AWDR
Description
The Siqura® HSD620 is an indoor High Speed PTZ dome camerawith exceptional imaging controls to provide excellent pictureseven in the most difficult circumstances.
High-speed domeThe HSD620 high-speed PTZ dome camera combines a 26xautofocus zoom lens with 12x digital zoom. Because the lens canmove in almost any direction (pan and tilt), this camera offers awide range of observation without missing the smallest details. Inaddition, the precision 400° per second pan and tilt drivetechnology offers almost instant preset positioning.
Image quality monitor and tampering alarmThe HSD620 is fitted with video analytics to check the health ofthe camera. This image quality monitor analyzes contrast,exposure, sharpness and noise. Camera tampering analyticsdetect any changes in the camera’s position or field of view. Theinstant a camera is subject to failure or tampering, an alert can beraised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
Open Streaming Architecture (OSA)The HSD620 is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.The HSD620 also supports the unique Siqura® MX™ protocol.
Multi-stream/multi-codecThe versatile HSD620 can simultaneously stream H.264, dualMPEG-4, MPEG-2, and MJPEG. Each stream is optimised for itsspecific purpose. The H.264 implementation uses dedicatedhardware to improve video quality while lowering bandwidthrequirements.
Day/night, backlight compensation, and wide dynamicrangeThe HSD620 provides automatic day/night functionality, for usein low light situations. Backlight compensation enhances imagevisibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the HSD620 provides all the interfacesnecessary for any IP CCTV application. The HSD620 is a hybridsolution and can provide local video for a public view monitor orlocal DVR.
HSD620IP PTZ dome with day/night, wide dynamic range (indoor)
Features
• Quad-stream support of dual H.264, MPEG-2, MPEG-4,MJPEG
• Image quality monitor and tamper detector
• 35x optical zoom/12x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• Electronic image stabilisation
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• Two-way audio; digital I/O
• Analog output/optical output options
24
x8/x1
Fiber optionA fiber option is available for direct connection of fiber to thecamera via a flexible SFP interface. The XSNet™ range of SFPmodules, with options for both single mode and multi-mode arecertified for use with this camera. The SFP interface is built intothe dome itself so a wide range of mounting options areavailable.
Technical Specifications
CameraImage sensor 1/4” CCD
Image resolutions NTSC/PAL
D1 720x480/720x576
½D1 352x480/352x576
2CIF 720x240/720x288
CIF 352x240/352x288
QCIF 176x120/176x144
Image resolution - horizontal 540TVL
Effective pixels 380k (NTSC)/440k (PAL)
Electronic shutter 1~1/10ks
Signal-to-noise ratio >50dB (AGC off)
Minimum scene illumination 0.09lux colour, 0.01 lux (b/w)
Video output 1 Vpp, 75Ω, BNC
Focal length 3.5~91mm
Focus mode Auto/manual
www.tkhsecurity.com
HSD620
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Motion detection On/off
Digital zoom 12x
Optical zoom 26x
FunctionsPrivacy masks 24
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Directional on-screen display Compass direction, azimuth, elevation
Video motion detection Yes (user-defined masking)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
PTZ coordinate data Via API or Pelco-D (set/get)
VideoNumber of video streams 2x H.264, 2x MPEG-4, MPEG-2, and/or MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264 BP (ISO/IEC 14496-10), MPEG-4 SP Layer 5 (ISO/IEC 14496-2), MPEG-2(ISO/IEC 13818-2), MJPEG
Types of streaming UDP/IP (multicast and/or unicast) TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Encoding latency <130ms typ
GOP structure I, IP selectable/ user profiles
Quad streaming 2x D1 at 30fps H.264 + D1 at 30fps MPEG-4 + CIF at 1fps MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
NetworkInterface(s) RJ-45 (factory installed) or SFP cage (accessory included); SFP modules not
included
Protocols H.264 BP, MPEG-4 ES, MPEG-2, RTP, UDP, IP, DHCP, IGMPv2, RTSP, (S)NTP,MX/IP, HTTP, SNMP v2, DiffServ, SAP, UPnP
AudioTwo-way audio Line out, line in/mic in (jack Ø3.5 mm)
www.tkhsecurity.com
Technical SpecificationsHSD620
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact closuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 27W
Power 19.2 - 28.4VAC (24 VAC nominal +/- 20%)
EnvironmentalOperating temperature Continuous 0°C to +40°C (+32°F to +104°F)
MechanicalDimensions Ø190 x 302.5mm (Ø7.5 x 11.9in)
Housing Aluminium
Colour RAL 9003 (signal white)
Bubble Optically clear polycarbonate
www.tkhsecurity.com
Technical SpecificationsHSD620
Ordering informationModels Description
HSD620/N High-speed PTZ dome camera, IP, day/night, (NTSC)
HSD620/P High-speed PTZ dome camera, IP, day/night, (PAL)
PA01 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 1.5A, indoor
PA02 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 3.0A, indoor
CM03 /HD Hard ceiling mount indoor HD and MD10A/HSD and MSD620
WM01A/HD Mini wall mount for HD/HSD series
WM02/HD Tube adapter for indoor MD10x/620 and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
XSNet SFP MM/850 2-fiber multimode SFP (100/1000Base-FX)
XSNet SFP MM/1310 2-fiber multimode SFP (100Mb only)
XSNet SFP SM/10 Single-mode SFP, dual LC connector
XSNet SFP SM/BidiA 1-fiber single-mode SFP, SC connector
XSNet SFP SM/BidiB 1-fiber single-mode SFP, SC connector
XSNet SFP SM/60 Long distance single-mode SFP, dual LC connector
XSNet SFP SM/CWDM CWDM SFP, dual LC connector
MFM Multifunction monitor
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHSD620
Description
The Siqura® HSD622 is an outdoor High Speed PTZ domecamera with exceptional imaging controls to provide excellentpictures even in the most difficult circumstances.
High-speed domeThe HSD622 high-speed PTZ dome camera combines a 26xautofocus zoom lens with 12x digital zoom. Because the lens canmove in almost any direction (pan and tilt), this camera offers awide range of observation without missing the smallest details. Inaddition, the precision 400° per second pan and tilt drivetechnology offers almost instant preset positioning.
Image quality monitor and tampering alarmThe HSD622 is fitted with video analytics to check the health ofthe camera. This image quality monitor analyzes contrast,exposure, sharpness and noise. Camera tampering analyticsdetect any changes in the camera’s position or field of view. Theinstant a camera is subject to failure or tampering, an alert can beraised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
Open Streaming Architecture (OSA)The HSD622 complies with worldwide approved standards forstreaming video and is tested with different vendors, makingthird-party integration easy. Its OSA offers standardisedstreaming video and remote control. The HSD622 also supportsthe unique Siqura® MX™ protocol.
Multi-stream/multi-codecThe versatile HSD622 can simultaneously stream H.264, dualMPEG-4, MPEG-2, and MJPEG. Each stream is optimised for itsspecific purpose. The H.264 implementation uses dedicatedhardware to improve video quality while lowering bandwidthrequirements.
Day/night, backlight compensation, and wide dynamicrangeThe HSD622 provides automatic day/night functionality, for usein low light situations. Backlight compensation enhances imagevisibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Complete systemThe HSD622 combines streaming video with duplex audio andI/O contacts over IP and balanced audio inputs/outputs suitablefor all industrial audio systems. With its analog output, the hybridHSD622 solution can provide local video for a public viewmonitor or local DVR.
HSD622IP PTZ dome with day/night, SFP interface (outdoor)
Features
• Quad-stream support of dual H.264, MPEG-2, MPEG-4,MJPEG
• Image quality monitor and tamper detector
• 26x optical zoom/12x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• Two-way audio; digital I/O
• 24 privacy masks
• Analog output/optical output options
24
x8/x1
Fiber optionA fiber option is available for direct connection of fiber to thecamera via a flexible SFP interface. The XSNet™ range of SFPmodules, with options for both single mode and multi-mode arecertified for use with this camera. The SFP interface is built intothe dome itself so a wide range of mounting options areavailable.
Technical Specifications
CameraImage sensor 1/4” CCD
Image resolutions PAL/NTSC
D1 720x480/720x576
½D1 352x480/352x576
2CIF 720x240/720x288
CIF 352x240/352x288
QCIF 176x120/176x144
Image resolution - horizontal 540TVL
Effective pixels 380k (NTSC)/440k (PAL)
Electronic shutter 1~1/10ks
Signal-to-noise ratio >50dB (AGC off)
Minimum scene illumination 0.09lux colour, 0.01 lux (b/w)
Video output 1 Vpp, 75Ω, RJ-45, SPF
Focal length 3.5~91mm
Focus mode Auto/manual
www.tkhsecurity.com
HSD622
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Motion detection On/off
Digital zoom 12x
Optical zoom 26x
FunctionsPrivacy masks 24
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Directional on-screen display Compass direction, azimuth, elevation
Video motion detection Yes (user-defined masking)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
PTZ coordinate data Via API or Pelco-D (set/get)
VideoNumber of video streams 2x H.264, 2x MPEG-4, MPEG-2, and/or MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264 BP (ISO/IEC 14496-10), MPEG-4 SP Layer 5 (ISO/IEC 14496-2), MPEG-2(ISO/IEC 13818-2), MJPEG
Types of streaming UDP/IP (multicast and/or unicast) TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Encoding latency <130ms typ
GOP structure I, IP selectable
Quad streaming 2x D1 at 30fps H.264 + D1 at 30fps MPEG-4 + CIF at 1fps MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
NetworkInterface(s) RJ-45 (factory installed) or SFP cage (accessory included); SFP modules not
included
Protocols H.264 BP, MPEG-4 ES, MPEG-2, RTP, UDP, IP, DHCP, IGMPv2, RTSP, (S)NTP,MX/IP, HTTP, SNMP v2, DiffServ, SAP, UPnP
AudioTwo-way audio Line out, line in/mic in (jack Ø3.5 mm)
www.tkhsecurity.com
Technical SpecificationsHSD622
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact closuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 73W
Power 19.2 - 28.4VAC (24 VAC nominal +/- 20%)
EnvironmentalOperating temperature Continuous -45 °C to +50 °C (-49 °F to +122 °F), 60°C maximum
Ingress protection IP66
MechanicalDimensions Ø190 x 302.5mm (Ø7.5 x 11.9in)
Weight 2.6kg (5.7lbs)
Housing Aluminium
Colour RAL 9003 (signal white)
Sunshield ABS/polycarbonate blend
Bubble Optically clear polycarbonate
Impact rating IK10
www.tkhsecurity.com
Technical SpecificationsHSD622
Ordering informationModels Description
HSD622/N IP High-speed PTZ dome camera, IP66, including sunshield (NTSC)
HSD622/P IP High-speed PTZ dome camera, IP66, including sunshield (PAL)
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
WM01A/HD Mini wall mount for HD/HSD series
WM02S Tube adapter for outdoor MD/MSD/HD/HSD series PTZ cameras
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
XSNet SFP MM/850 2-fiber multimode SFP (100/1000Base-FX)
XSNet SFP MM/1310 2-fiber multimode SFP (100Mb only)
XSNet SFP SM/10 Single-mode SFP, dual LC connector
XSNet SFP SM/BidiA 1-fiber single-mode SFP, SC connector
XSNet SFP SM/BidiB 1-fiber single-mode SFP, SC connector
XSNet SFP SM/60 Long distance single-mode SFP, dual LC connector
XSNet SFP SM/CWDM CWDM SFP, dual LC connector
MFM Multifunction monitor*WM02S is included with each outdoor MD/MSD/HD/HSD camera.
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHSD622
Description
The Siqura® HSD626 is an outdoor High speed PTZ domecamera with exceptional imaging controls to provide excellentpictures even in the most difficult circumstances.
High-speed domeThe HSD626 high-speed PTZ dome camera combines a 35xautofocus zoom lens with 12x digital zoom. Precision 400° persecond pan and tilt drive technology offers almost instant presetpositioning. This camera's robust feature set includes multiplesequences, cruises, and autopan functions.
Image quality monitor and tampering alarmThe HSD626 is fitted with video analytics to check the health ofthe camera. This image quality monitor analyzes contrast,exposure, sharpness and noise. Camera tampering analyticsdetect any changes in the camera’s position or field of view. Theinstant a camera is subject to failure or tampering, an alert can beraised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
NEMA TS 2The HSD626 has been tested and approved according to theNEMA TS 2 standard.
Open Streaming Architecture (OSA) and ONVIFThe HSD626 is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.The HSD626 also fully supports ONVIF and is listed as ONVIFProfile S conformant.
Multistream/multicodecThe versatile HSD626 is capable of quad streaming, with dual H.264 streams simultaneous with two flexible encoding outputswhich can provide MPEG-2, MPEG-4 or MJPEG streams. Eachstream is optimised for its purpose. The H.264 implementation isbased on dedicated hardware resulting in unparalleled videoquality.
Day/night, backlight compensation, and wide dynamicrangeThe HSD626 provides automatic day/night functionality, for usein low light situations. Backlight compensation enhances imagevisibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
HSD626IP PTZ dome with D/N and Wide Dynamic Range (outdoor)
Features
• Quad-stream support of dual H.264, MPEG-2, MPEG-4,MJPEG
• Image quality monitor and tamper detector
• 35x optical zoom/12x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• NEMA TS 2 certified
• Electronic image stabilisation
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• Two-way audio; digital I/O
• Analog output/optical output options
8
x8/x1
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the HSD626 provides all the interfacesnecessary for any IP CCTV application. The HSD626 is a hybridsolution and can provide local video for a public view monitor orlocal DVR.
Image stabiliserWhen the camera is in its maximum zoom range, every smallmovement of the camera gives relatively large movement in thepicture. The image stabiliser digitally compensates thismovement for a stable picture. This feature is especially useful forpole-mounted cameras.
SFP interface accessoryThe HSD626 comes with an SFP interface as an alternative to theRJ-45 Cat5 Ethernet connection. It supports the XSNet SFP rangefor Ethernet over fiber and the ECO-plug™ for Ethernet overcoax.
Technical Specifications
www.tkhsecurity.com
HSD626
CameraImage sensor 1/4” CCD
Image resolutions NTSC/PAL
D1 720x480/720x576
½D1 352x480/352x576
2CIF 720x240/720x288
CIF 352x240/352x288
QCIF 176x120/176x144
Image resolution - horizontal 540 TVL/540 TVL
Effective pixels 410 k/470 k
Electronic shutter 1~1/30 k s
Signal-to-noise ratio >50 dB (AGC off)
Minimum scene illumination 0.1 lux colour, 0.01 lux (b/w)
Video output 1 Vpp, 75 Ω, RJ-45, BNC
Focal length 3.4~119 mm
Focus mode Auto/manual
Image controlWide dynamic range On/off (ratio/, shutter, iris levels 0-128)
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Digital zoom 12x
Optical zoom 35x
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
www.tkhsecurity.com
Technical SpecificationsHSD626
FunctionsPrivacy masks 8 (black/white/mosaic)
Directional on-screen display Compass direction, azimuth, elevation
PTZ coordinate data Via API or Pelco-D (set/get)
Electronic image stabiliser On/off (5 Hz/10 Hz)
VideoNumber of video streams 2x H.264, 2x MPEG-4, MPEG-2, and/or MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264 BP (ISO/IEC 14496-10), MPEG-4 SP Layer 5 (ISO/IEC 14496-2), MPEG-2(ISO/IEC 13818-2), MJPEG
Types of streaming UDP/IP (multicast and/or unicast), TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Video motion detection Yes (user-defined masking)
Encoding latency <130 ms typ
GOP structure I, IP selectable/user profiles
Quad streaming 2x D1 at 30 fps H.264 + D1 at 30 fps MPEG-4 + CIF at 1 fps MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
AudioTwo-way audio Line out, line in/mic in (jack Ø3.5 mm)
Contact closuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
NetworkInterface(s) RJ-45 (factory installed) or SFP cage (accessory included); SFP modules not
included
Protocols H.264 BP, MPEG-4 ES, MPEG-2, RTP, UDP, IP, DHCP, IGMPv2, RTSP, (S)NTP,MX/IP, HTTP, SNMP v2, DiffServ, SAP, UPnP, ONVIF
PoweringPower consumption 73 W
Power 19.2 - 28.4 VAC (24 VAC nominal +/- 20%)
EnvironmentalOperating temperature Continuous -45 °C to +60 °C (-49 °F to +140 °F), 74 °C maximum
Ingress protection IP66
www.tkhsecurity.com
Technical SpecificationsHSD626
NEMA TS 2 certificationTest Standard/Test Method
Low Temperature Low Voltage NEMA TS 2 Section 2.2.7.3 Test C
Low Temperature High Voltage NEMA TS 2 Section 2.2.7.4 Test D
High Temperature High Voltage NEMA TS 2 Section 2.2.7.5 Test E
High Temperature Low Voltage NEMA TS 2 Section 2.2.7.6 Test F
Power Interruption 500 mSec NEMA TS 2 Section 2.2.10.1
Power Interruption 1000 mSec NEMA TS 2 Section 2.2.10.1
Vibration NEMA TS 2 Section 2.2.8
Shock NEMA TS 2 Section 2.2.9
MechanicalDimensions Ø190 x 302.5 mm (Ø7.5 x 11.9 in)
Weight 2.6 kg (5.7 lbs)
Housing Aluminium
Colour RAL 9003 (signal white)
Sunshield ABS/polycarbonate blend
Bubble Optically clear polycarbonate
Impact rating IK10
Ordering informationModels Description
HSD626 /N High-speed PTZ dome camera, IP, wide dynamic range, day/night, IP66, including sunshield (NTSC)
HSD626 /P High-speed PTZ dome camera, IP,wide dynamic range, day/night, IP66, including sunshield (PAL)
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
WM01A/HD Mini wall mount for HD/HSD series
WM02S* Tube adapter for outdoor MD/MSD/HD/HSD series PTZ cameras
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
MFM Multifunction monitor*WM02S is included with each outdoor MD/MSD/HD/HSD camera.
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsHSD626
Description
The Siqura® HSD820H1-IM is an indoor high speed PTZ domecamera with exceptional imaging controls to provide highdefinition (1080p) pictures for highly detailed surveillancefootage.
High-speed domeThe HSD820H1-IM high-speed PTZ dome camera has an 18xautofocus zoom lens with 8x digital zoom. Precision 400° persecond pan and tilt drive technology offers almost instant presetpositioning. Support for many presets, cruises and sequencesprovides for highly flexible manual or automatic operation.
Multistream high definitionThe HSD820H1-IM series cameras have dual-stream capability forsimultaneous streaming of H.264/H.264 or H.264/MJPEG. FullHD 1080p streaming with a D1 second stream or dual 720pstreams is possible. Multiple combinations of resolution andframe rate can be configured to satisfy different live viewing andrecording scenarios.
Open standardsMultiple options are available to easily integrate the HSD820H1-IM to a video management system. In support of open standards,the HSD820H1-IM is compliant with both the ONVIF specificationand Siqura's Open Streaming Architecture (OSA) HTTP API.
Day/night, backlight compensation, and wide dynamicrangeThe HSD820H1-IM provides automatic day/night functionality,for use in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the HSD820H1-IM provides all the interfacesnecessary for any IP CCTV application. The HSD820H1-IM is ahybrid solution and can provide local video for a public viewmonitor or local DVR.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
HSD820H1-IMHD Indoor PTZ Dome with dual stream H.264
Features
• Full HD 1080p resolution
• Dual stream H.264/H.264 or H.264/MJPEG
• 18x optical zoom/8x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• 2 alarm inputs/2 outputs
• Analog output
• 16 privacy masks
• 24VAC and 802.3at PoE+
x2/x2
CameraImage sensor 1/2.8” CMOS
Video standards PAL/NTSC
Stream 1 H.264 - 1080p30H.264 - 1080p15H.264 - 720p30
Stream 2 H.264 - D1 30fpsMJPEG - D1 30fpsH.264 - 1080p15MJPEG - 1080p15H.264 - 720p30H.264 - 720p30MJPEG- 720p30
Output resolutions 1080p (1920x1080); 720p (1280x720); 1024x768; 800x600; D1 (720x480); CIF(352x240)
Electronic shutter 1~1/10k s
Minimum scene illumination 0.3lux colour, 0.04lux (b/w), 1/30 sec shutter, 30IRE, F1.6
Focal length 4.7 to 84.6mm
Focus mode Auto/manual
Analog output BNC (1.0Vpp)
Image controlWide dynamic range On/off
WDR value 84 dB
Backlight compensation On/off
White balance Auto/indoor/outdoor/ATW/manual
Iris control Auto/manual
Noise reduction On/off
Automatic gain control Auto/manual
Day/night (IR-cut filter) Auto/on/off
Digital zoom 8x
Optical zoom 18x
www.tkhsecurity.com
Technical SpecificationsHSD820H1-IM
FunctionsPrivacy masks 16
Image rotation Normal, flip, mirror, 180°
Local recording Continuous, scheduled, alarm
Video motion detection On/off
VideoNumber of video streams 2x H.264 or H.264/MJPEG
Frame rate 1-30fps (NTSC), 1-25 (PAL)
Compression algorithm(s) H.264 MP (ISO/IEC 14496-10)
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 5°~400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Home function Preset, sequence, auto pan, cruise
Auto flip Mechanical/off
NetworkInterface(s) 10/100Mb Ethernet
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP,PPPoE, UPnP, IGMP, SNMP, IEEE 802.1x, QoS, ONVIF
Connector type RJ-45
AudioTwo-way audio G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
Contact closuresInputs 2- 5V 10kΩ pull-up input
Outputs 2- photocoupler transistor output
Reactions Preset, sequence, auto pan, cruise
StorageStorage options Micro SD card, 32 GB
www.tkhsecurity.com
Technical SpecificationsHSD820H1-IM
PoweringPower consumption 20W
Power 19.2 - 28.4VAC (24 VAC nominal +/- 20%), 802.3at Power-over-Ethernet (PoE+)
EnvironmentalOperating temperature 0°C to +40°C (+32°F to +104°F)
MechanicalDimensions Ø171.7 × 228.71mm (Ø6.76 × 9in)
Weight 1.62kg (3.57lbs)
Housing Aluminium
Colour RAL 9003 (signal white)
Bubble Optically clear polycarbonate
Ordering informationModels Description
HSD820H1-IM High-speed PTZ dome camera, dual H.264, HD1080p, 18x optical zoom, indoor mount, 50/60hz
PA01 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 1.5A, indoor
PA02 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 3.0A, indoor
CM07 Recessed mount (flush kit), HSD820-IM
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
WM08 Tube adapter (pendant), HSD820-IM
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsHSD820H1-IM
Description
The Siqura® HSD820H1-EP is an outdoor high speed PTZ domecamera with exceptional imaging controls providing highdefinition (1080p) pictures for highly detailed surveillancefootage.
High-speed domeThe HSD820H1-EP high-speed PTZ dome camera has an 18xautofocus zoom lens with 8x digital zoom. Precision 400° persecond pan and tilt drive technology offers almost instant presetpositioning. Support for many presets, cruises and sequencesprovides for highly flexible manual or automatic operation.
Multistream high definitionThe HSD820H1-EP series cameras have dual-stream capability forsimultaneous streaming of H.264/H.264 or H.264/MJPEG. FullHD 1080p streaming with a D1 second stream or dual 720pstreams is possible. Multiple combinations of resolution andframe rate can be configured to satisfy different live viewing andrecording scenarios.
Open standardsMultiple options are available to easily integrate the HSD820H1-EP to a video management system. In support of open standards,the HSD820H1-EP is compliant with both the ONVIF specificationand Siqura's Open Streaming Architecture (OSA) HTTP API.
Day/night, backlight compensation, and wide dynamicrangeThe HSD820H1-EP provides automatic day/night functionality,for use in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the HSD820H1-EP provides all the interfacesnecessary for any IP CCTV application. The HSD820H1-EP is ahybrid solution and can provide local video for a public viewmonitor or local DVR.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
HSD820H1-EPHigh definition outdoor PTZ with dual stream H.264
Features
• Full HD 1080p resolution
• Dual stream H.264/H.264 or H.264/MJPEG
• 18x optical zoom/8x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• 2 alarm inputs/2 outputs
• Two-way audio
• 16 privacy masks
16
CameraImage sensor 1/2.8” Progressive scan CMOS
Video standards NTSC/PAL
Streaming capabilities
Stream 1 H.264 - 1080p30H.264 - 1080p15H.264 - 720p30
Stream 2 H.264 - D1 30fpsMJPEG - D1 30fpsH.264 - 1080p15MJPEG - 1080p15H.264 - 720p30H.264 - 720p30MJPEG- 720p30
Output resolutions 1080p (1920x1080); 720p (1280x720); 1024x768; 800x600; D1 (720x480); CIF(352x240)
Electronic shutter 1/30~1/10000s
Minimum scene illumination 0.3lux colour, 0.04lux (b/w), 1/30 sec shutter, 30IRE, F1.6
Focal length 4.7 to 84.6mm
Focus mode Auto/manual
Analog output BNC (1.0Vpp)
www.tkhsecurity.com
Technical SpecificationsHSD820H1-EP
Image controlWide dynamic range On/off
WDR value 84 dB
Backlight compensation On/off
White balance Auto/indoor/outdoor/ATW/manual
Iris control Auto/manual
Sharpness 15 levels
2D Noise reduction On/off
Automatic gain control Auto/manual
Day/night (IR-cut filter) Auto/on/off
Digital zoom 8x
Optical zoom 18x
FunctionsPrivacy masks 16
Image rotation Normal, flip, mirror, 180°
On-screen display Date, time, and title (20 characters)
Local recording Continuous, scheduled, alarm
Video motion detection On/off
Tamper monitoring On/off
VideoNumber of video streams 2x H.264 or H.264/MJPEG
Frame rate 1-30fps (NTSC), 1-25 (PAL)
Compression algorithm(s) H.264 MP (ISO/IEC 14496-10)
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 5°~400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Home function Preset, sequence, auto pan, cruise
Auto flip Mechanical/off
www.tkhsecurity.com
Technical SpecificationsHSD820H1-EP
NetworkInterface(s) 10/100Mb Ethernet
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP,PPPoE, UPnP, IGMP, SNMP, IEEE 802.1x, QoS, ONVIF
Connector type RJ-45
AudioTwo-way audio G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
Contact closuresInputs 2- 5V 10kΩ pull-up input
Outputs 2- photocoupler transistor output
Reactions Preset, sequence, auto pan, cruise
StorageStorage options Micro SD card, 32 GB
PoweringPower consumption 20W; 65W with heater
Power 19.2 - 28.4VAC (24 VAC nominal +/- 20%); 802.3at Power-over-Ethernet (PoE+)
EnvironmentalOperating temperature - 24 VAC Continuous -40°C to +50°C (-40°F to +122°F)
Operating temperature - PoE+ 0°C to +50°C (+32°F to +122°F)
Ingress protection IP66
MechanicalDimensions Ø191.97 × 282.11mm (Ø7.55 × 11.1in)
Weight 2.32kg (5.11lbs)
Housing Aluminium
Colour RAL 9003 (signal white)
Sunshield ABS/polycarbonate blend
Bubble Optically clear polycarbonate
Impact rating IK10
www.tkhsecurity.com
Technical SpecificationsHSD820H1-EP
Ordering informationModels Description
HSD820H1-EP Outdoor HD 1080P High-speed PTZ dome camera, day/night, wide dynamic range, 50/60hz
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
WM01A/HD Mini wall mount for HD/HSD series
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsHSD820H1-EP
Description
The Siqura® HSD820H2-I is an indoor High Speed PTZ domecamera with exceptional imaging controls providing highdefinition (1080p) pictures for highly detailed surveillancefootage.
High-Speed DomeThe HSD820H2-I high-speed PTZ dome camera has a 20xautofocus zoom lens with 8x digital zoom. Precision 400° persecond pan and tilt drive technology offer almost instant presetpositioning. Support for many presets, cruises, and sequencesprovides for highly flexible manual or automatic operation.
Multistream high definitionThe HSD820H2-I series cameras have dual-stream capability forsimultaneous streaming of H.264/H.264 or H.264/MJPEG. FullHD 1080p streaming with a D1 second stream or dual 720pstreams is possible. Multiple combinations of resolution andframe rate can be configured to satisfy different live viewing andrecording scenarios.
Open standardsMultiple options are available to easily integrate the HSD820H2-Ito a video management system. In support of open standards,the HSD820H2-I is compliant with both the ONVIF specificationand Siqura's Open Streaming Architecture (OSA) HTTP API.
Day/night, backlight compensation, and wide dynamicrangeThe HSD820H2-I provides automatic day/night functionality, foruse in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the HSD820H2-I provides all the interfacesnecessary for any IP CCTV application. The HSD820H2-I is ahybrid solution and can provide local video for a public viewmonitor or local DVR.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
Fiber optionIn addition to the RJ-45 interface, an SFP interface comesstandard with the HSD820H2-I for direct connection of fiber tothe camera. The XSNet™ range of SFP modules, with options forboth single mode and multimode is available. The SFP interfaceis built into the device itself so a wide range of mounting optionsis available.
HSD820H2-IHigh Definition Indoor PTZ with dual stream H.264
Features
• Full HD 1080p resolution
• Dual stream H.264/H.264 or H.264/MJPEG
• 20x optical zoom/8x digital zoom
• Optical output/analog output options
• Day/night with IR-cut filter/WDR/BLC
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• 2 alarm inputs/2 outputs
• Two-way audio
• 16 privacy masks
x2/x2
16
CameraImage sensor 1/2.8” Progressive scan CMOS
Electronic shutter 1/30~1/10000s
Minimum scene illumination 0.3lux colour, 0.04lux (b/w), 1/30 sec shutter, 30IRE, F1.6
Focal length 4.7 to 94mm
Focus mode Auto/manual
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 5°~400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Home function Preset, sequence, auto pan, cruise
Auto flip Mechanical/off
FunctionsPrivacy masks 16
Image rotation Normal, flip, mirror, 180°
On-screen display Date, time, and title (20 characters)
Local recording Continuous, scheduled, alarm
Video motion detection On/off
Tamper monitoring On/off
www.tkhsecurity.com
Technical SpecificationsHSD820H2-I
Image ControlWide dynamic range On/off
WDR value 84 dB
Backlight compensation On/off
White balance Auto/indoor/outdoor/ATW/manual
Iris control Auto/manual
Sharpness 15 levels
2D Noise reduction On/off
Automatic gain control Auto/manual
Day/night (IR-cut filter) Auto/on/off
Digital zoom 8x
Optical zoom 20x
VideoVideo standards NTSC, PAL
Number of video streams 2x H.264 or H.264/MJPEG
Frame rate 1-30fps (NTSC), 1-25fps (PAL)
Compression algorithm(s) H.264 (ISO/IEC 14496-10)
Supported resolutions 1080p (1920x1080); 720p (1280x720); 1024x768; 800x600; D1 (720x480); CIF(352x240)
Streaming capabilities
Stream 1 H.264 - 1080p30H.264 - 1080p15H.264 - 720p30
Stream 2 H.264 - D1 30fpsMJPEG - D1 30fpsH.264 - 1080p15MJPEG - 1080p15H.264 - 720p30H.264 - 720p30MJPEG- 720p30
Analog output BNC (1.0Vpp)
AudioTwo-way audio G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
Contact closuresInputs 2- 5V 10kΩ pull-up input
Outputs 2- photocoupler transistor output
Reactions Preset, sequence, auto pan, cruise
NetworkInterface(s) 10/100Mb Ethernet
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP,PPPoE, UPnP, IGMP, SNMP, IEEE 802.1x, QoS, ONVIF
Connector type RJ-45 or SFP
www.tkhsecurity.com
Technical SpecificationsHSD820H2-I
StorageStorage options Micro SD card, 32 GB
PoweringPower consumption 20W
Power 19.2 - 28.4VAC (24 VAC nominal +/- 20%), 802.3at Power-over-Ethernet (PoE+)
EnvironmentalOperating temperature 0°C to +40°C (+32°F to +104°F)
MechanicalDimensions Ø191.97 × 282.11mm (Ø7.55 × 11.1in)
Weight 2.32kg (5.11lbs)
Housing Aluminium
Colour RAL 9003 (signal white)
Sunshield ABS/polycarbonate blend
Bubble Optically clear polycarbonate
Impact rating IK10
www.tkhsecurity.com
Technical SpecificationsHSD820H2-I
Ordering InformationModels Description
HSD820H2-I High-speed PTZ dome camera, dual H.264, HD 1080P, 20x optical zoom, indoor mount, 50/60hz
PA01 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 1.5A, indoor
PA01 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 1.5A, indoor
PA02 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 3.0A, indoor
PA02 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 3.0A, indoor
CM07 Recessed mount (flush kit), HSD820H2-I
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
WM08 Tube adapter (pendant), HSD820H2-I
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
XSNet SFP MM/850 2-fiber multimode SFP, 100/1000Base-FX
XSNet SFP MM/1310 Single-mode SFP, 100Mb only
XSNet SFP SM/10 Single-mode SFP, dual LC connector
XSNet SFP SM/BidiA 1-fiber single-mode SFP, SC connector
XSNet SFP SM/BidiB 1-fiber single-mode SFP, SC connector
XSNet SFP SM/60 Long distance single-mode SFP, dual LC connector
XSNet SFP SM/CWDM CWDM SFP, dual LC connector
MFM Multifunction monitor
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsHSD820H2-I
Description
The Siqura® HSD820H2-E is an outdoor High Speed PTZ domecamera with exceptional imaging controls providing highdefinition (1080p) pictures for highly detailed surveillancefootage.
High-Speed DomeThe HSD820H2-E high-speed PTZ dome camera has a 20xautofocus zoom lens with 8x digital zoom. Precision 400° persecond pan and tilt drive technology offer almost instant presetpositioning. Support for many presets, cruises, and sequencesprovides for highly flexible manual or automatic operation.
Multistream high definitionThe HSD820H2-E series cameras have dual-stream capability forsimultaneous streaming of H.264/H.264 or H.264/MJPEG. FullHD 1080p streaming with a D1 second stream or dual 720pstreams is possible. Multiple combinations of resolution andframe rate can be configured to satisfy different live viewing andrecording scenarios.
Open standardsMultiple options are available to easily integrate the HSD820H2-E to a video management system. In support of open standards,the HSD820H2-E is compliant with both the ONVIF specificationand Siqura's Open Streaming Architecture (OSA) HTTP API.
Day/night, backlight compensation, and wide dynamicrangeThe HSD820H2-E provides automatic day/night functionality, foruse in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Audio, I/O contacts, and analog outputBy combining streaming video with duplex audio and I/Ocontacts over IP, the HSD820H2-E provides all the interfacesnecessary for any IP CCTV application. The HSD820H2-E is ahybrid solution and can provide local video for a public viewmonitor or local DVR.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
Fiber optionIn addition to the RJ-45 interface, an SFP interface comesstandard with the HSD820H2-E for direct connection of fiber tothe camera. The XSNet™ range of SFP modules, with options forboth single mode and multimode is available. The SFP interfaceis built into the device itself so a wide range of mounting optionsis available.
HSD820H2-EHigh Definition Outdoor PTZ with dual stream H.264
Features
• Full HD 1080p resolution
• Dual stream H.264/H.264 or H.264/MJPEG
• 20x optical zoom/8x digital zoom
• Optical output/analog output options
• Day/night with IR-cut filter/WDR/BLC
• 400°/second preset targeting
• 360 degree continuous rotation
• 256 presets/8 programmable cruises
• 2 alarm inputs/2 outputs
• Two-way audio
• 16 privacy masks
x2/x2
16
CameraImage sensor 1/2.8” Progressive scan CMOS
Electronic shutter 1/30~1/10000s
Minimum scene illumination 0.3lux colour, 0.04lux (b/w), 1/30 sec shutter, 30IRE, F1.6
Focal length 4.7 to 94mm
Focus mode Auto/manual
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 5°~400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Home function Preset, sequence, auto pan, cruise
Auto flip Mechanical/off
FunctionsPrivacy masks 16
Image rotation Normal, flip, mirror, 180°
On-screen display Date, time, and title (20 characters)
Local recording Continuous, scheduled, alarm
Video motion detection On/off
Tamper monitoring On/off
www.tkhsecurity.com
Technical SpecificationsHSD820H2-E
Image ControlWide dynamic range On/off
WDR value 84 dB
Backlight compensation On/off
White balance Auto/indoor/outdoor/ATW/manual
Iris control Auto/manual
Sharpness 15 levels
2D Noise reduction On/off
Automatic gain control Auto/manual
Day/night (IR-cut filter) Auto/on/off
Digital zoom 8x
Optical zoom 20x
VideoVideo standards NTSC, PAL
Number of video streams 2x H.264 or H.264/MJPEG
Frame rate 1-30fps (NTSC), 1-25fps (PAL)
Compression algorithm(s) H.264 (ISO/IEC 14496-10)
Supported resolutions 1080p (1920x1080); 720p (1280x720); 1024x768; 800x600; D1 (720x480); CIF(352x240)
Streaming capabilities
Stream 1 H.264 - 1080p30H.264 - 1080p15H.264 - 720p30
Stream 2 H.264 - D1 30fpsMJPEG - D1 30fpsH.264 - 1080p15MJPEG - 1080p15H.264 - 720p30H.264 - 720p30MJPEG- 720p30
Analog output BNC (1.0Vpp)
AudioTwo-way audio G.711, 8 kHz, A-law, μ-law, 64 kbit/s; G.726, 8 kHz, 40 kbit/s
Contact closuresInputs 2- 5V 10kΩ pull-up input
Outputs 2- photocoupler transistor output
Reactions Preset, sequence, auto pan, cruise
NetworkInterface(s) 10/100Mb Ethernet
Protocols IPv4/v6, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP,PPPoE, UPnP, IGMP, SNMP, IEEE 802.1x, QoS, ONVIF
Connector type RJ-45 or SFP
www.tkhsecurity.com
Technical SpecificationsHSD820H2-E
StorageStorage options Micro SD card, 32 GB
PoweringPower consumption 20W; 65W with heater
Power 19.2 - 28.4VAC (24 VAC nominal +/- 20%); 802.3at Power-over-Ethernet (PoE+)
EnvironmentalOperating temperature - 24 VAC Continuous -40°C to +50°C (-40°F to +122°F)
Operating temperature - PoE+ 0°C to +40°C (+32°F to +104°F)
Ingress protection IP66
MechanicalDimensions Ø191.97 × 282.11mm (Ø7.55 × 11.1in)
Weight 2.32kg (5.11lbs)
Housing Aluminium
Colour RAL 9003 (signal white)
Sunshield ABS/polycarbonate blend
Bubble Optically clear polycarbonate
Impact rating IK10
Ordering InformationModels Description
HSD820H2-E High-speed PTZ dome camera, HD 1080P, outdoor, day/night, wide dynamic range, 50/60hz
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
WM01A/HD Mini wall mount for HD/HSD series
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
XSNet SFP MM/850 2-fiber multimode SFP (100/1000Base-FX)
XSNet SFP MM/1310 2-fiber multimode SFP (100Mb only)
XSNet SFP SM/10 Single-mode SFP, dual LC connector
XSNet SFP SM/BidiA 1-fiber single-mode SFP, SC connector
XSNet SFP SM/BidiB 1-fiber single-mode SFP, SC connector
XSNet SFP SM/60 Long distance single-mode SFP, dual LC connector
XSNet SFP SM/CWDM CWDM SFP, dual LC connector
MFM Multifunction monitor
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsHSD820H2-E
Description
The Siqura® HD10A PRH provides a robust housing whichprotects the camera in severe environments where excessivemoisture, dirt, and pollution are present. In addition, theadvanced features such as day/night, wide dynamic range, andbacklight compensation ensure excellent pictures in the mostdifficult lighting situations.
High-speed domeThe HD10A PRH high-speed PTZ dome camera combines a 26xautofocus zoom lens with 12x digital zoom. Because the lens canmove in almost any direction (pan and tilt), this camera offers awide range of observation without missing the smallest details. Inaddition, the precision 400° per second pan and tilt drivetechnology offers almost instant preset positioning. The robustfeature set includes multiple sequences, cruises, and autopanfunctions.
Superior protectionThe HD10A PRH has an IP67 ingress rating and the housing isconstructed of materials designed to withstand intense levels ofsolar heat (945VA UV protected). Pressurising the housing,particularly with inert nitrogen gas, will prevent moisture,pollution, and dust from damaging the camera.
Day/night, backlight compensation, and wide dynamicrangeThe HD10A PRH provides automatic day/night functionality, foruse in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
HD10APRHPressurized PTZ Dome with Day/Night (Outdoor)
Features
• 26x optical zoom/12x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• 400°/second preset targeting
• 256 presets/8 programmable cruises
• Compass, azimuth, and elevation OSD
• Pressurised to 7psi; holds pressure for up to 1 year
• Low-pressure sensor, Schrader and pressure relief valvesstandard
• IP67 ingress protection
• 24 VAC
24
2
CameraImage sensor 1/4” EXview CCD
Image resolution - horizontal 530TVL (NTSC)/530TVL (PAL)
Effective pixels 380k (NTSC)/440k (PAL)
Electronic shutter 1~1/10ks (NTSC)/1~1/10ks (PAL)
Signal-to-noise ratio >50dB (AGC off)
Synchronisation system Internal/line lock
Minimum scene illumination 0.09lux colour, 0.01 lux (b/w)
Video output 1 Vpp, 75Ω BNC (gold-plated center pin)
Focal length 3.5~91mm
Focus mode Auto/manual
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Digital zoom 12x
Optical zoom 26x
FunctionsPrivacy masks 24
Directional on-screen display Compass direction, azimuth, elevation
Electronic image stabiliser On/off
PTZ coordinate data Via Pelco-D
www.tkhsecurity.com
Technical SpecificationsHD10APRH
NetworkPTZ control interface(s) RS-485
PTZ control protocols Pelco-D (bidirectional), Pelco-P, Kalatel, Philips, AD422
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact closuresInputs 2 (1 General, 1 low pressure)
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 80W
Power 24 VAC
EnvironmentalOperating temperature -45 °C to +50 °C (-49 °F to +122 °F); 60°C maximum
Ingress protection IP67
Effective projected area ~0.12m2
MechanicalDimensions Ø290 x 340mm (Ø11.4 x 13.4in)
Weight 5kg (11lbs)
Housing Polycarbonate, glass-filled
Colour White/black
Bubble Optically clear polycarbonate, 0.115” thick
www.tkhsecurity.com
Technical SpecificationsHD10APRH
Ordering informationModels Description
HD10A PRH /N High-speed PTZ dome camera, outdoor, pressurised Hsg, 26x optical zoom, analog, NTSC
HD10A PRH /P High-speed PTZ dome camera, outdoor, pressurised Hsg, 26x optical zoom, analog, PAL
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, outdoor (IP66)
WM01A/HD Mini wall mount for HD/HSD series
WM02/HD Tube adapter for indoor MD10x/620 and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHD10APRH
Description
The Siqura® HD11APRH provides a robust housing whichprotects the camera in severe environments where excessivemoisture, dirt, and pollution are present. In addition, theadvanced features such as Day/Night, Wide Dynamic Range,Backlight Compensation, and image stabilisation ensureexcellent pictures in the most difficult lighting situations.
High-speed domeThe HD11APRH high-speed PTZ dome camera combines a 35xautofocus zoom lens with 12x digital zoom. Precision 400° persecond pan and tilt drive technology offers almost instant presetpositioning. This camera's robust feature set includes multiplesequences, cruises, and autopan functions.
Superior protectionThe HD11APRH has an IP67 ingress rating and the housing isconstructed of materials designed to withstand intense levels ofsolar heat (945VA UV protected). Pressurising the housing,particularly with inert nitrogen gas, will prevent moisture,pollution, and dust from damaging the camera.
Day/night, backlight compensation, and wide dynamicrangeThe HD11APRH provides automatic day/night functionality, foruse in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
HD11APRHPressurized PTZ dome with D/N and WDR
Features
• 35x optical zoom/12x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• 400°/second preset targeting
• 256 presets/8 programmable cruises
• Compass, azimuth, and elevation OSD
• Pressurised to 7psi; holds pressure for up to 1 year
• Low-pressure sensor, Schrader and pressure relief valvesstandard
• IP67 ingress protection
• 24 VAC
8
2
CameraImage sensor 1/4” EXview CCD
Image resolution - horizontal 540TVL
Effective pixels 380k (NTSC)/440k (PAL)
Electronic shutter 1~1/30ks.
Signal-to-noise ratio >50dB (AGC off)
Synchronisation system Internal/line lock
Minimum scene illumination 0.09lux colour, 0.01 lux (b/w)
Video output 1 Vpp/ 75Ω BNC (gold-plated center pin)
Focal length 3.5~119mm
Focus mode Auto/manual
Image ControlWide dynamic range On/offf (ratio, Shutter, iris levels 0-128)
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Digital zoom 12x
Optical zoom 35x
FunctionsPrivacy masks 8 (black/White/mosaic (3 levels)
Directional on-screen display Compass direction, azimuth, elevation
Electronic image stabiliser On/off
PTZ coordinate data Via Pelco-D
www.tkhsecurity.com
Technical SpecificationsHD11APRH
NetworkPTZ control interface(s) RS-485
PTZ control protocols Pelco-D (bidirectional), Pelco-P, Kalatel, Philips, AD422
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact closuresInputs 2 (1 General, 1 low pressure)
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 80W
Power 24 VAC
EnvironmentalOperating temperature Continuous -45 °C to +50 °C (-49 °F to +122 °F), 60°C maximum
Operating humidity Up to 100%
Heater Activation 15°C - 27°C (60°F - 80°F)
Ingress protection IP67
Effective projected area ~0.12m2
MechanicalDimensions Ø290 x 340mm (Ø11.4 x 13.4in)
Weight 5kg (11lbs)
Housing Polycarbonate, glass-filled
Colour White/black
Bubble Optically clear polycarbonate, 0.115” thick
www.tkhsecurity.com
Technical SpecificationsHD11APRH
Ordering InformationModels Description
HD11APRH /N High-speed PTZ dome camera, Outdoor, Pressurized Hsg, 35x optical zoom, Analog, NTSC
HD11APRH /P High-speed PTZ dome camera, Outdoor, Pressurized Hsg, 35x optical zoom, Analog, PAL
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, Outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, Outdoor (IP66)
WM01A/HD Mini wall mount for HD/HSD series
WM02/HD Tube adapter for indoor MD10x/620 and HD-series, compatible with CM01/02, WM01A, WM07A, PTM01
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHD11APRH
Description
The Siqura® HSD620PRH provides a robust housing whichprotects the camera in severe environments where excessivemoisture, dirt, and pollution are present. In addition, advancedfeatures such as Day/Night, Wide Dynamic Range and BacklightCompensation ensure excellent pictures in the most difficult oflighting situations.
Multi-stream/multi-codecThe versatile HSD620PRH can simultaneously stream H.264, dualMPEG-4, MPEG-2, and MJPEG. Each stream is optimised for itsspecific purpose. The H.264 implementation uses dedicatedhardware to improve video quality while lowering bandwidthrequirements.
Open Streaming Architecture (OSA)The HSD620PRH is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.The HSD620PRH also supports the unique Siqura® MX™protocol.
Camera health checkThe HSD620PRH is fitted with a unique feature that checks thehealth of the camera. This image quality monitor analysescontrast, exposure, sharpness and noise, and immediately alertsan operator for any malfunctioning.
Superior protectionThe HSD620PRH has an IP67 ingress rating and the housing isconstructed of materials designed to withstand intense levels ofsolar heat (945VA UV protected). Pressurising the housing,particularly with inert nitrogen gas, will prevent moisture,pollution, and dust from damaging the camera.
Day/night, backlight compensation, and wide dynamicrangeThe HSD620PRH provides automatic day/night functionality, foruse in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
High-speed domeThe HSD620PRH high-speed PTZ dome camera combines a 26xautofocus zoom lens with 12x digital zoom. Because the lens canmove in almost any direction (pan and tilt), this camera offers awide range of observation without missing the smallest details. Inaddition, the precision 400° per second pan and tilt drivetechnology offers almost instant preset positioning.
Privacy masksPrivacy masks cover sections of the image. This feature is oftenrequested for such situations as city centre surveillance and pointof sale keypads.
HSD620PRHPressurized IP PTZ dome with Day/Night
Features
• 26x optical zoom/12x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• 400°/second preset targeting
• 256 presets/8 programmable cruises
• Compass, azimuth, and elevation OSD
• Pressurised to 7psi; holds pressure for up to 1 year
• Low-pressure sensor, Schrader and pressure relief valvesstandard
• IP67 ingress protection
• 24 VAC
24
x8/x1
CameraImage sensor 1/4” CCD
Image resolutions NTSC/PAL
D1 720x480/720x576
½D1 352x480/352x576
2CIF 720x240/720x288
CIF 352x240/352x288
QCIF 176x120/176x144
Image resolution - horizontal 540TVL
Effective pixels 380k (NTSC)/440k (PAL)
Electronic shutter 1~1/10ks
Signal-to-noise ratio >50dB (AGC off)
Minimum scene illumination 0.09lux colour, 0.01 lux (b/w)
Video output 1 Vpp, 75Ω, RJ-45, SPF
Focal length 3.5~91mm
Focus mode Auto/manual
Image ControlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Motion detection On/off
Digital zoom 12x
Optical zoom 26x
www.tkhsecurity.com
Technical SpecificationsHSD620PRH
FunctionsPrivacy masks 24
Directional on-screen display Compass direction, azimuth, elevation
PTZ coordinate data Via API or Pelco-D (set/get)
VideoNumber of video streams 2x H.264, 2x MPEG-4, MPEG-2, and/or MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264BP (ISO/IEC 14496-10) MPEG-4 SP Layer 5 (ISO/IEC 14496-2), MJPEG
Types of streaming UDP/IP (multicast and/or unicast); TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Encoding latency <130ms typ
GOP structure I, IP (selectable/user profiles)
Quad streaming D1 at 30fps H.264 + D1 at 30fps MPEG-4 + CIF at 1fps MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
Video motion detection Yes (user-defined masking)
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
NetworkInterface(s) RJ-45
Protocols H.264 BP, MPEG-4 ES, MPEG-2, RTP, UDP, IP, DHCP, IGMPv2, RTSP, (S)NTP,MX/IP, HTTP, SNMPv2, DiffServ, SAP, UPnP, ONVIF
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact ClosuresInputs 4 (3 General, 1 low pressure)
Reactions Preset, sequence, auto pan, cruise
www.tkhsecurity.com
Technical SpecificationsHSD620PRH
PoweringPower consumption 80 W
Power 24 VAC
EnvironmentalOperating temperature Continuous -45 °C to +50 °C (-49 °F to +122 °F), 60°C maximum
Ingress protection IP67
Effective projected area ~0.12m2
MechanicalDimensions Ø290 x 340 mm (Ø11.4 x 13.4 in)
Weight 5 kg (11 lbs)
Housing Polycarbonate, glass-filled
Colour White/black
Bubble Optically clear polycarbonate, 0.115 in thick
Ordering InformationModels Description
HSD620PRH /N High-speed PTZ dome camera, Outdoor, Pressurised Hsg, 26x opt. zoom, Dual stream H.264, NTSC
HSD620PRH /P High-speed PTZ dome camera, Outdoor, Pressurised Hsg, 26x opt. zoom, Dual stream H.264, PAL
WM01A/HD Mini wall mount for HD/HSD series
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHSD620PRH
Description
The Siqura® HSD621 PRH provides a robust housing whichprotects the camera in severe environments where excessivemoisture, dirt, and pollution are present. In addition, theadvanced features such as Day/Night, Wide Dynamic Range,Backlight Compensation, and image stabilisation ensureexcellent pictures in the most difficult lighting situations.
Multistream/multicodecThe versatile HSD621 PRH is capable of quad streaming, withdual H.264 streams simultaneous with two flexible encodingoutputs which can provide MPEG-2, MPEG-4 or MJPEG streams.Each stream is optimised for its purpose. The H.264implementation is based on dedicated hardware resulting inunparalleled video quality.
Open Streaming Architecture (OSA) and ONVIFThe HSD621 PRH is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.The HSD621 PRH also fully supports ONVIF and is listed asONVIF Profile S conformant.
Camera health checkThe HSD621 PRH is fitted with a unique feature that checks thehealth of the camera. This image quality monitor analysescontrast, exposure, sharpness and noise, and immediately alertsan operator for any malfunctioning.
NEMA TS 2The HSD621 PRH has been tested and approved according tothe NEMA TS 2 standard.
Superior protectionThe HSD621 PRH has an IP67 ingress rating and the housing isconstructed of materials designed to withstand intense levels ofsolar heat (945VA UV protected). Pressurising the housing,particularly with inert nitrogen gas, will prevent moisture,pollution, and dust from damaging the camera.
Day/night, backlight compensation, and wide dynamicrangeThe HSD621 PRH provides automatic day/night functionality, foruse in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
High-speed domeThe HSD621 PRH high-speed PTZ dome camera combines a 35xautofocus zoom lens with 12x digital zoom. Precision 400° persecond pan and tilt drive technology offers almost instant presetpositioning. This camera's robust feature set includes multiplesequences, cruises, and autopan functions.
HSD621PRHPressurized IP PTZ dome with D/N, WDR
Features
• 35x optical zoom/12x digital zoom
• Day/night with IR-cut filter/WDR/BLC
• 400°/second preset targeting
• 256 presets/8 programmable cruises
• NEMA TS 2 certified
• Compass, azimuth, and elevation OSD
• Pressurised to 7psi; holds pressure for up to 1 year
• Low-pressure sensor, Schrader and pressure relief valvesstandard
• IP67 ingress protection
• 24 VAC
8
x4
CameraImage sensor 1/4” CCD
Image resolutions PAL/NTSC
D1 720x480/720x576
½D1 352x480/352x576
2CIF 720x240/720x288
CIF 352x240/352x288
QCIF 176x120/176x144
Image resolution - horizontal 540 TVL
Effective pixels 380 k (NTSC)/440 k (PAL)
Electronic shutter 1~1/10 ks
Synchronisation system Internal/line lock
Signal-to-noise ratio >50 dB (AGC off)
Minimum scene illumination 0.1 lux colour, 0.01 lux (b/w)
Video output 1 Vpp, 75Ω BNC (gold-plated center pin)
Focal length 3.5~91 mm
Focus mode Auto/manual
Image ControlWide dynamic range On/off (ratio, shutter, iris levels 0-128)
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Motion detection On/off
Electronic image stabiliser On/off (5 Hz/10 Hz)
Digital zoom 12x
Optical zoom 35x
www.tkhsecurity.com
Technical SpecificationsHSD621PRH
FunctionsPrivacy masks 8 (black/White/mosaic (3 levels)
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Directional on-screen display Compass direction, azimuth, elevation
Video motion detection Yes (user-defined masking)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
PTZ coordinate data Via API or Pelco-D (set/get)
VideoNumber of video streams 2x H.264, 2x MPEG-4, MPEG-2, and/or MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264BP (ISO/IEC 14496-10) MPEG-4 SP Layer 5 (ISO/IEC 14496-2), MJPEG
Types of streaming UDP/IP (multicast and/or unicast)
Number of output streams Up to 20
Encoding latency <130 ms typ
GOP structure I, IP (selectable/user profiles)
Quad streaming D1 at 30 fps H.264 + D1 at 30 fps MPEG-4 + CIF at 1 fps MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
NetworkInterface(s) RJ-45
Protocols H.264 BP, MPEG-4 ES, MPEG-2, RTP, UDP, IP, DHCP, IGMPv2, RTSP, (S)NTP,MX/IP, HTTP, SNMPv2, DiffServ, SAP, UPnP, ONVIF
Contact ClosuresInputs 4 (3 General, 1 low pressure)
Reactions Preset, sequence, auto pan, cruise
www.tkhsecurity.com
Technical SpecificationsHSD621PRH
PoweringPower consumption 80 W
Power 24 VAC
EnvironmentalOperating temperature Continuous -45 °C to +60 °C (-49 °F to +140 °F), 74 °C maximum
Ingress protection IP67
Effective projected area ~0.12 m2
NEMA TS 2 certificationTest Standard/Test Method
Low Temperature Low Voltage NEMA TS 2 Section 2.2.7.3 Test C
Low Temperature High Voltage NEMA TS 2 Section 2.2.7.4 Test D
High Temperature High Voltage NEMA TS 2 Section 2.2.7.5 Test E
High Temperature Low Voltage NEMA TS 2 Section 2.2.7.6 Test F
Power Interruption 500 mSec NEMA TS 2 Section 2.2.10.1
Power Interruption 1000 mSec NEMA TS 2 Section 2.2.10.1
Vibration NEMA TS 2 Section 2.2.8
Shock NEMA TS 2 Section 2.2.9
MechanicalDimensions Ø290 x 340 mm (Ø11.4 x 13.4 in)
Weight 5 kg (11 lbs)
Housing Polycarbonate, glass-filled
Colour White/black
Bubble Optically clear polycarbonate, 0.115 in thick
Ordering InformationModels Description
HSD621 PRH /N High-speed PTZ dome camera, Outdoor, Pressurised Hsg, 26x opt. zoom, Dual stream H.264, NTSC
HSD621 PRH /P High-speed PTZ dome camera, Outdoor, Pressurised Hsg, 26x opt. zoom, Dual stream H.264, PAL
WM01A/HD Mini wall mount for HD/HSD series
WM07A Gooseneck tube
WM05 Corner plate, compatible with WM01A and WM07A
WM06 Wall box mounting, compatible with WM01A and WM07A
PM01 Pole thin direct mounting, compatible with WM01A and WM07A
PM02 Pole wide direct mounting, compatible with WM01A and WM07A
PM03 Pole thin box mounting, compatible with WM01A and WM07A
PM04 Pole wide box mounting, compatible with WM01A and WM07A
PM05 Swan neck tube
PTM01 1-1/2” pipe thread adapter
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsHSD621PRH
Description
The Siqura® HD18 EXP is designed for use in potentiallyexplosive atmospheres and harsh environmental conditions. Thecamera housing is manufactured completely from stainless steel316 which is ideally suited for use within the offshore andonshore environments. Stainless steel screws and mountingbracket are incorporated ensuring a totally corrosion free unit.
Day/night, backlight compensation, and wide dynamicrangeThe HD18 EXP provides automatic day/night functionality, foruse in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
High-speed domeThe HD18 EXP high-speed PTZ dome camera combines a 35xautofocus zoom lens with 12x digital zoom. Precision 400° persecond pan and tilt drive technology offers almost instant presetpositioning. Support for many presets, cruises and sequencesprovides a highly flexible manual or automatic operation.
Image stabiliserWhen the camera is in its maximum zoom range, every smallmovement of the camera gives relatively large movement in thepicture. The image stabiliser digitally compensates thismovement for a stable picture. This feature is especially useful forpole-mounted cameras.
HD18 EXPExplosion-Proof PTZ Dome with Day/Night
Features
• 36x optical zoom/12x digital zoom
• Day/night with IR-cut filter
• Wide dynamic range
• Backlight compensation
• Electronic image stabilisation
• IP67 ingress rating
• ATEX-approved for gas and dust
• Fan and heater
16
x8/x1
CameraImage sensor 1/4” CCD
Image resolution - horizontal 540TVL
Effective pixels 380k (NTSC)/440k (PAL)
Electronic shutter 1~1/10k s
Signal-to-noise ratio >50dB (AGC off)
Minimum scene illumination 0.1 lux colour, 0.01 lux (b/w)
Video output 1 Vpp, 75Ω
Angle of view 55.8° wide to 1.55° tele
Focal length 3.4 - 122.4mm
Focus mode Auto/manual
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Digital zoom* 12x
Optical zoom* 36x
Electronic image stabiliser On/off*Maximum zoom operation can give optical distortion because of exd polycarbonate bubble.
FunctionsPrivacy masks 16
Directional on-screen display Compass direction, azimuth, elevation
PTZ coordinate data Via API or Pelco-D (set/get)
www.tkhsecurity.com
Technical SpecificationsHD18 EXP
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact closuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
PoweringPower consumption 20W (45W with heater)
Power 24 VAC +/- 20%
EnvironmentalOperating temperature (camera) Continuous -45 °C to +50 °C (-49 °F to +122 °F); 60°C (140°F) maximum
Certified temperature (camera)* Continuous -20°C to +40°C (-4°F to +104°F)
Ingress protection IP66, IP67 (IP68 on request)
Certification* ATEX, II 2 G/D, Exd IIB T5 T100°C zone 1/21 and 2/22
Entries 1x M20 and 2x M25 (EExd)*Certifications are site specific. Please consult factory with detailed requirements.
MechanicalDimensions Ø195 x 373mm (Ø7.7 x 14.7in)
Weight 14kg (30.9lbs)
Housing Stainless steel 316
Bubble 3mm polycarbonate
Bubble coating Factory-applied for up to 3 years maintenance-free operation.
www.tkhsecurity.com
Technical SpecificationsHD18 EXP
Ordering informationModels Description
HD18 EXP Explosion-proof PTZ dome with day/night
WMEX-01 Wall mount, stainless steel, explosion-proof PTZ
PMEX-01 Pole mount, stainless steel, explosion-proof PTZ
CMEX-01 Ceiling (pendant) mount, stainless steel, explosion-proof PTZ
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and supportof this product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHD18 EXP
Description
The Siqura® HSD628EXP is designed to endure in extremelyharsh environments, such as oil rigs and power plants. Its robustconstruction guarantees the safety of your facility even if thecamera should come in contact with hazardous material. Its fully-integrated stainless steel housing and mounting bracket protectthis Siqura camera in exceptionally taxing conditions, includingoffshore installations, where corrosion is a constant threat. Thecamera housing is manufactured completely from stainless steel316 which is ideally suited for use within the offshore andonshore environments. Stainless steel screws and mountingbracket for additional wall, ceiling or pole mount areincorporated ensuring a totally corrosion free unit.
Multi-stream/multi-codecThe versatile HSD628EXP can simultaneously stream H.264, dualMPEG-4, MPEG-2, and MJPEG. Each stream is optimised for itsspecific purpose. The H.264 implementation uses dedicatedhardware to improve video quality while lowering bandwidthrequirements.
Open Streaming Architecture (OSA)The HSD628EXP is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.The HSD628EXP also supports the unique Siqura® MX™protocol.
Camera health checkThe HSD628EXP is fitted with a unique feature that checks thehealth of the camera. This image quality monitor analysescontrast, exposure, sharpness and noise, and immediately alertsan operator for any malfunctioning.
Day/night, backlight compensation, and wide dynamicrangeThe HSD628EXP provides automatic day/night functionality, foruse in low light situations. Backlight compensation enhancesimage visibility in difficult lighting situations. This ensures qualitypictures at all times. Wide dynamic range solves the problem ofoverlit images by taking the better of two pictures with differentlight references.
High-speed domeThe HSD628EXP high-speed PTZ dome camera combines a 35xautofocus zoom lens with 12x digital zoom. Precision 400° persecond pan and tilt drive technology offers almost instant presetpositioning. Support for many presets, cruises and sequencesprovides a highly flexible manual or automatic operation.
Fiber interface accessoryA fiber option is available for direct connection of fiber to thedome via a flexible SFP interface. A choice of single-mode andmulti-mode XSNet™ SFP modules are certified for use with theHSD628EXP.
HSD628EXPExplosion-Proof IP PTZ dome with Day/NightHSD628EXPExplosion-Proof IP PTZ dome with Day/Night
Features
• H.264, MPEG-2, MPEG-4 and MJPEG
• 36x optical zoom/12x digital zoom
• Day/night with IR-cut filter
• Wide dynamic range
• Backlight compensation
• Video motion detection
• Electronic image stabilisation
• Camera health check
• IP67 ingress rating
• ATEX-approved for gas and dust
• Fan and heater
• Direct fiber options
16
x8/x1
Features
• H.264, MPEG-2, MPEG-4 and MJPEG
• 36x optical zoom/12x digital zoom
• Day/night with IR-cut filter
• Wide dynamic range
• Backlight compensation
• Video motion detection
• Electronic image stabilisation
• Camera health check
• IP67 ingress rating
• ATEX-approved for gas and dust
• Fan and heater
• Direct fiber options
16
x8/x1
CameraImage sensor 1/4” CCD
Image resolutions NTSC/PAL
D1 720x480/720x576
½D1 352x480/352x576
2CIF 720x240/720x288
CIF 352x240/352x288
QCIF 176x120/176x144
Image resolution - horizontal 540TVL/540TVL
Effective pixels 380k/440k
Electronic shutter 1~1/10k s
Angle of view 55.8° wide to 1.55° tele
Signal-to-noise ratio >50dB (AGC off)
Minimum scene illumination 0.1 lux colour, 0.01 lux (b/w)
Video output 1 Vpp, 75Ω
Focal length 3.4~122.4mm
Focus mode Auto/manual
www.tkhsecurity.com
Technical SpecificationsHSD628EXP
Image controlWide dynamic range On/off
Backlight compensation On/off
White balance Auto/manual
Iris control Auto/manual
Automatic gain control Auto/manual
Day/night (IR-cut filter) On/off
Digital slow shutter On/off
Motion detection On/off
Digital zoom* 12x
Optical zoom* 36x*Maximum zoom operation can give optical distortion because of exd polycarbonate bubble.
FunctionsPrivacy masks 16
Directional on-screen display Compass direction, azimuth, elevation
PTZ coordinate data Via API or Pelco-D (set/get)
Embedded analyticsImage quality monitor Focus, contrast, exposure, noise level
Tamper detection Blocked view, changed position (16 presets)
VideoNumber of video streams 2x H.264, 2x MPEG-4, MPEG-2, and/or MJPEG
Frame rate 1 to 30 fps
Compression algorithm(s) H.264 BP (ISO/IEC 14496-10), MPEG-4 SP Layer 5 (ISO/IEC 14496-2), MPEG-2(ISO/IEC 13818-2), MJPEG
Types of streaming UDP/IP (multicast and/or unicast), TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Video motion detection Yes (user-defined masking)
Encoding latency <130 ms typ
GOP structure I, IP selectable/user profiles
Quad streaming 2x D1 at 30 fps H.264 + D1 at 30 fps MPEG-4 + CIF at 1 fps MJPEG
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
NetworkInterface(s) RJ-45 (factory installed) or SFP cage (accessory included); SFPmodules not
included*
Protocols H.264 BP, MPEG-4 ES, MPEG-2, RTP, UDP, IP, DHCP, IGMPv2, RTSP, (S)NTP,MX/IP, HTTP, SNMP v2, DiffServ, SAP, UPnP
* Please consult factory for certification of SFP modules not listed on this data sheet.
www.tkhsecurity.com
Technical SpecificationsHSD628EXP
AudioNumber of channels 1 (mono, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8-bit linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ or 600Ω balanced
Output impedance <100Ω balanced
Pan / TiltPan travel 360° continuous
Tilt travel -10°~190°
Preset speed 400°/s
Manual speed 0.5°~90°/s
Presets 256 presets
Preset accuracy +/- .100°
Cruise 8
Sequence 8
Auto pan 4
Proportional pan and tilt On/off
Resume after power loss Yes
Zone title 16
Home function Preset, sequence, auto pan, cruise
Auto flip Digital, mechanical, off
Contact closuresInputs 8
Outputs 1
Reactions Preset, sequence, auto pan, cruise
StorageStorage options Micro SD card, 32 GB
EnvironmentalOperating temperature (camera) Continuous -45 °C to +50 °C (-49 °F to +122 °F); 60°C (140°F) maximum
Certified temperature (camera)* Continuous -20°C to +40°C (-4°F to +104°F)
Ingress protection IP66, IP67
Certification* ATEX, II 2 G/D, Exd IIB T5 T100°C zone 1/21 and 2/22
Entries 1x M20 and 2x M25 (EExd)*Certifications are site specific. Please consult factory with detailed requirements.
www.tkhsecurity.com
Technical SpecificationsHSD628EXP
MechanicalDimensions Ø195 x 373mm (Ø7.7 x 14.7in)
Weight 15kg (33.1lbs)
Housing Stainless steel 316
Bubble 3mm polycarbonate
Bubble coating Factory-applied for up to 3 years maintenance-free operation.
Ordering informationModels Description
HSD628EXP/N IP high speed dome, 36x optical zoom, explosion-proof, stainless steel, NTSC
HSD628EXP/P IP high speed dome, 36x optical zoom, explosion-proof, stainless steel, PAL
WMEX-01 Wall mount, stainless steel, explosion-proof PTZ
PMEX-01 Pole mount, stainless steel, explosion-proof PTZ
CMEX-01 Ceiling (pendant) mount, stainless steel, explosion-proof PTZ
Certified SFP modules
XSNet SFP MM/1310 2-fiber multimode SFP (100Mb only)
XSNet SFP SM/10 Single-mode SFP, dual LC connector
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and supportof this product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsHSD628EXP
Description
TKH Security Solutions offers a complete range of poweradapters to power the Siqura® camera range. The poweradapters are provided with the right connector and plug(EU=European, US=United States, UK=United Kingdom) to makeinstallation quick and easy. For the installation of a power supplynearby the camera our recommendation is found in thedescription of the type in the ordering information. In case ofmultiple (box or fixed dome) cameras powered from one pointwe recommend Siqura® PA02 (indoor) or Siqura® PA03 (outdoor).
Camera Power Adapters
Features
• Power adapters for Siqura® cameras and other Siquradevices
EnvironmentalStorage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Electrical
Input voltage range Output voltagerange Connector type Dimensions (h x w x
d) Weight
PA01 /EU 220-230VAC50/60Hz 24VAC at 1.5A tinned leads
160 x 73 x 45mm(6.29 x 2.87 x1.77in)
800g (27.05oz)
PA01 /US 100-115VAC50/60Hz, 0.63A 24VAC at 1.5A tinned leads
160 x 73 x 45mm(6.29 x 2.87 x1.77in)
800g (27.05oz)
PA01 /UK 220-235VAC50/60Hz 24VAC at 1.5A tinned leads
160 x 73 x 45mm(6.29 x 2.87 x1.77in)
800g (27.05oz)
PA02 /EU 220-230VAC50/60Hz, 0.4A 24VAC at 3A tinned leads
128 x 110 x 53mm(5.03 x 4.33 x2.08in)
1.4 kg (3.08lbs)
PA02 /US 100-115VAC50/60Hz 24VAC at 3A tinned leads
128 x 110 x 53mm(5.03 x 4.33 x2.08in)
1.4 kg (3.08lbs)
PA02 /UK 220-230VAC50/60Hz, 0.4A 24VAC at 3A tinned leads
128 x 110 x 53mm(5.03 x 4.33 x2.08in)
1.4kg (3.08lbs)
PA03 /EU 220-230VAC50/60Hz, 0.4A 24VAC at 3A Spring terminal 186.5 x 147 x 76mm
(7.30 x 5.80 x 3in) 2.60kg (5.80lbs)
PA03 /US 100-115VAC50/60Hz 24VAC at 3A Spring terminal 186.5 x 147 x 76mm
(7.30 x 5.80 x 3in) 2.60kg (5.80lbs)
PSA-UN12DC with ferrules 100-230VAC60/50Hz 12VDC at 1.5A US/EU/UK plug
adapters35.3 x 43.5 x 74mm(1.4 x 1.7 x 2.9in)
PSA-UN12DC with BarrelConnector*
100-230VAC60/50hz 12VDC at 1.5A US/EU/UK plug
adapters35.3 x 43.5 x 74mm(1.4 x 1.7 x 2.9in)
9010 PS* 100-240VAC,60/50hz 6VDC at 4A Barrell connector
73 x 65 x 58mm(2.87 x 2.55 x2.28in)
470g (15.89oz)
PSR-12DC*85-264VAC50/60Hz, 12VDC,1.5A
12VDC at 1.5A Spring ClampTerminal
73 x 65 x 58mm(2.87 x 2.55 x2.28in)
400g (13.52oz)
* Not used with Siqura cameras. For more information see the Stand-alone and mini chassis power supplies data sheet.
www.tkhsecurity.com
Technical SpecificationsCamera Power Adapters
Camera Power Adapters Compatibility Matrix
BC14WDR
BC620WDR /BC620WDR-AID /BC820 /BC820H1
BL820M1IR FD820 /IFD820 CD820 MD10A /
MSD620MD12A /MSD622
PA01/EU1 PA01/US1 PA01/UK1 PA02/EU2 PA02/US2 PA02/UK2 PA03/EU PA03/US PSAUN12DC/Ferrules3
HD10A /HSD620
HD12A /HD16A /HSD622 /HSD626
HD10APRH /HD11APRH
HD18EXP /HSD628EXP
HSD620PRH/HSD621PRH
HSD820 H1-IM
HSD820 H1-EP
PA01/EU1 PA01/US1 PA01/UK1 PA02/EU2 PA02/US2 PA02/UK2 PA03/EU PA03/US PSAUN12DC/Ferrules3
1 The PA01 models are compatible with FD820 and IFD820 outdoors (with heater) with use of a separate environmental enclosure forPA01.
2 The PA02 models are compatible with MD12A, HD12A, HD16AWDR, MSD622, HSD622, HSD626 with use of a separateenvironmental enclosure for PA02.
3 Ships in package as standard accessory with the BC620 series, BC820 series, and BC14WDR.
4 The CD820 does not require power adapters as it can utilise Power over Ethernet (PoE).
Ordering InformationModels Description
PA01 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads, 1.5A, Indoor
PA01 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 1.5A, Indoor
PA01 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 1.5A, Indoor
PA02 /EU Power supply, 230VAC, EU plug to 24VAC, tinned leads , 3.0A Indoor
PA02 /US Power supply, 110VAC, US plug to 24VAC, tinned leads, 3.0A, Indoor
PA02 /UK Power supply, 230VAC, UK plug to 24VAC, tinned leads, 3.0A, Indoor
PA03 /EU Power supply, 230VAC to 24VAC, tinned leads, 3.0A, Outdoor (IP66)
PA03 /US Power supply, 110VAC to 24VAC, tinned leads, 3.0A, Outdoor (IP66)
PSA-UN12DC with ferrules Power adapter, 110-230VAC, 60/50hz. to 12VDC, 1.5A, Ferrules, with US/EU/UK plug adapters
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsCamera Power Adapters
Description
Regardless of the application at hand, there is a Siqura camerahousing or accessory to meet the requirements of anysurveillance situation.
HSG01, HSG02, HSG03 HSG/Wall HSG/Corner
HSG/Pole HSG/Ceiling HSG/Sun
Box Camera Housings and Accessories
Features
• Wide angle IR LED lighting
• Waterproof, IP67 ingress rating
• Side opening, easy to install
• Die-cast aluminium, resistant to impacts
• 25kg (55lb) load rating
• Resistant to salt damage
• Sturdy joint
• Internal cable management
• 6mm tempered glass cover
• Available accessories: sunshield, brackets, mountadapter (corner, ceiling, pole)
HSG01 housingHousing Fixed camera housing, IP67
Material Aluminium
Dimensions (h x w x d) 145x 174 x 422mm (5.7 x 6.8 x 16.6in)
Weight 2.3kg (5.07lb)
HSG02 housingHousing Fixed camera housing; heater/blower, 24 VAC, IP67
Operating temperature -30 °C to +50 °C (-22 °F to +122 °F)
Material Aluminium
Dimensions (h x w x d) 145x 174 x 422mm (5.7 x 6.8 x 16.6in)
Weight 2.3kg (5.07lbs)
HSG02LV housingHousing Fixed camera housing; heater/blower, 90-260VAC, IP67
Operating temperature -30 °C to +50 °C (-22 °F to +122 °F)
Material Aluminium
Dimensions (h x w x d) 145x 174 x 422mm (5.7 x 6.8 x 16.6in)
Weight 2.3kg (5.07lbs)
HSG03 housingHousing Fixed camera housing; IR illuminator; heater/blower; 24 VAC, IP67
Operating temperature -30 °C to +50 °C (-22 °F to +122 °F)
Material Aluminium
Dimensions (h x w x d) 145x 174 x 422mm (5.7 x 6.8 x 16.6in)
Weight 2.3kg (5.07lb)
HSG03LV housingHousing Fixed camera housing; IR illuminator; heater/blower; 90-260VAC, IP67
Operating temperature -30 °C to +50 °C (-22 °F to +122 °F)
Material Aluminium
Dimensions (h x w x d) 145x 174 x 422mm (5.7 x 6.8 x 16.6in)
Weight 2.3kg (5.07lb)
HSG/Wall mountMaterial Aluminium
Dimensions (h x w x d) 181 x 140 x 114mm (7.1 x 5.5 x 4.5in)
Weight 600g (1.32lbs)
HSG/Pole mountDimensions (h x w x d) 240 x 260 x 59.6mm (9.45 x 10.24 x 2.35in)
Weight 1.0kg (2.2lbs)
www.tkhsecurity.com
Technical SpecificationsBox Camera Housings and Accessories
HSG/Corner mountDimensions (h x w x d) 377 x 260 x 179mm (14.84 x 10.24 x 7.05in)
Weight 1.0kg (2.2lbs)
HSG/Ceiling mountWeight 2.5kg (5.51lbs)
Dimensions 359 x 437mm (14.1 x 17.2in)
HSG/Sun shieldMaterial Aluminium
Dimensions (h x w x d) 425 x 180.5 x 73mm (16.73 x 7.11 x 2.87in)
Weight 380g (13.4oz)
Ordering informationModels Description
HSG01 Fixed camera housing
HSG02 Fixed camera housing, heater/blower, 24 VAC, IP67
HSG02LV Fixed camera housing, heater/blower, 90-260VAC, IP67
HSG03 Fixed camera housing, IR illuminator, heater/blower, 24 VAC, IP67
HSG03LV Fixed camera housing, IR illuminator,heater/blower, 90-260VAC, IP67
HSG/Wall Bracket, wall
HSG/Pole Bracket, pole
HSG/Corner Bracket, corner
HSG/Ceiling Bracket, ceiling
HSG/Sun Fixed camera housing, sunshield
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsBox Camera Housings and Accessories
Description
Siqura® offers a wide range of accessories to support a variety ofcamera installation requirements, including special optical domecovers, mounting plates, brackets, tubes, and cable assemblies.
Specific data sheets for Siqura® wall, ceiling, or pole mountingapplications and power supply options are available for the entirecamera line.
CM01 CM02 CM03/MD, CM03/HD CM04
CM06 WM02/HD CC13, CC13/IP
Ceiling Mount Accessories
CM01: Straight Tube, 25cm*Material Iron
Height 250mm (9.8in)
Diameter 50mm (2in)
Weight 1kg (2.2lbs)
CM02: Straight Tube, 50cm*Material Iron
Height 500mm (19.7in)
Diameter 50mm (2in)
Weight 1kg (2.2lbs)*Supplied with 1x rubber washer-8, 1x pendant tube washer, 1x spring washer-8 and 1x M8*12 screwWhen used with MD12A, HD12A or HD16A WDR: order CC13 cableWhen used with MSD622, HSD622 or HSD626: order CC13 /IP cable
CM03/MDStandard accessory for hard ceiling usewith the indoor MD10A and MSD620
Height 19mm
Diameter of three holes 4.5mm
Diameter of the bracket 158mm
Weight 200g (7.05oz)
CM03/HDStandard accessory for hard ceiling usewith the indoor HD10A and HSD620
Height 19mm
Diameter of three holes 4.5mm
Diameter of the bracket 158mm
Weight 200g (7.05oz)
CM04/MD: Flush MountFor in-ceiling installation of the indoorMD10A and MSD620
Height 85mm (3.35in)
Diameter 180mm (7.1in)
Weight 0.5kg (1.1lbs)
Red sticker 155 +/- 3mm (6.1 +/- 1.2in)
CM04 /HD: Fush MountFor in-ceiling installation of the indoorHD10A and HSD620
Height 85mm (3.35in)
Diameter 180mm (7.1in)
Weight 0.5kg (1.1lbs)
Red sticker 155 +/- 3mm (6.1 +/- 1.2in)
www.tkhsecurity.com
Technical SpecificationsCeiling Mount Accessories
CM06: Recessed Ceiling KitFor in-ceiling installation of FD820 andIFD820
Height 62.9mm (2.48in)
Diameter 200mm (7.87in)
Weight 340g (12oz)
WM02/HDTube adapter for indoor PTZ domes
Height 73.9mm (2.91in)
Diameter 140.7mm (5.54in)
Weight 300g (10.58oz)
CC131.3m cable BNC/RS-485/power jacks 22 pins for WM07A, PM05 and CM02
CC13/IP1.3m cable BNC/audio/power jacks 22 pins for WM07A, PM05 and CM02
Ordering informationModels Description
CM01 Straight tube 25cm
CM02 Straight tube 50cm
CM03/MD Trim ring for MD10A and MSD620 models*
CM03/HD Trim ring for HD10A and HSD620 models*
CM04/MD Flush mount for MD10A/MSD620
CM04/HD Flush mount for HD10A/HSD620
CM06 Recessed ceiling kit for FD820/IFD820
WM02/HD Tube adapter for indoor PTZ domes*The trim rings supplied with the hard ceiling mount (CM03) must be attached to the flush mount (CM04).
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsCeiling Mount Accessories
Description
Siqura® offers a wide range of accessories to support a variety of camera installation requirements, including special opticaldome covers, mounting plates, brackets, tubes, and cable assemblies.
Specific data sheets for Siqura® wall, ceiling, or pole mounting applications and power supply options are available for the entirecamera line.
PM01 PM02 PM03 PM04
PM05 PTM01 ST01 ST02
CC13; CC13/IP
Pole Mount Accessories
Pole Mount Accessories
PM01: Pole thin direct mountingApplication Supplied with4x stainless steel straps, 4x M8*16 screw, 4x washer
Dimensions (h x w x d) 232 x 136 x 60mm (9.1 x 5.4 x 2.4in)
Diameter 112~130mm (4.4~5in)
Weight 0.7kg (1.6lbs)
PM02: Pole wide direct mountingApplication Supplied with4x stainless steel straps, 4x M8*16 screw, 4x washer
Dimensions (h x w x d) 270 x 170 x 60mm (10.6 x 6.7 x 2.4in)
Diameter 112~140mm (4.4~5.5in)
Weight 1kg (2.2lb)
PM03: Pole thin boxApplication Supplied with4x stainless steel straps, 4x M8*16 screw, 4x washer
Dimensions (h x w x d) 291 x 136 x 242mm (11.5 x 5.4 x 9.5 in)
Weight 3.1kg (6.9lbs)
PM04: Pole wide boxApplication Supplied with4x stainless steel straps, 4x M8*16 screw, 4x washer
Compatible with WM01A, WM07A brackets
Dimensions (h x w x d) 270 x 166 x 155mm (10.6 x 6.5 x 6.1in)
Weight 3.2kg (7.1lbs)
PM05: Swan neckColour White
Material Iron
Height 850mm (33.5in)
Diameter 50mm (2in)
Weight 3kg (6.6lb)
Application When used with MD12A, HD12A or HD16A WDR: order CC13 cableWhen used with MSD622, HSD622 or HSD626: order CC13 /IP cable
ST01: Stainless steel strapsApplication For fixing pole direct mounting/pole box to the pole.
Length 700mm (27.5in)
Width 16mm (0.63in)
Weight 0.02kg (0.04lbs)
ST02: Stainless steel strap cutterApplication For tensioning, cutting and crimping stainless steel straps; suitable for straps
widths: 1/2”, 5/8”, 3/4”
Weight 1.4kg (3.1lbs)
CC131.3m cable BNC/RS-485/power jacks 22 pins for WM07A, PM05 and CM02
www.tkhsecurity.com
Technical SpecificationsPole Mount Accessories
CC13/IP1.3m cable BNC/audio/power jacks 22 pins for WM07A, PM05 and CM02
PTM01: Pipe thread adapterApplication For adapting from a WM02 mounting interface to a standard 1 1/2” NPT pipe
thread mount
Ordering informationModels Description
PM01 Pole thin direct mounting
PM02 Pole wide direct mounting
PM03 Pole thin box
PM04 Pole wide box
PM05 Swan neck
ST01 Stainless steel straps
ST02 Stainless steel strap cutter
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsPole Mount Accessories
Description
Siqura® offers a wide range of accessories to support a variety of camera installation requirements, including special optical dome covers,mounting plates, brackets, tubes, and cable assemblies.
Specific data sheets for Siqura® wall, ceiling, or pole mounting applications and power supply options are available for the entire cameraline.
WM01A WM02/MD; WM02/HD WM07 WM04
WM05 WM06 CC13; CC13/IP PTM01
Wall Mount Accessories
WM01A: Mini wall bracketDimensions (h x w x d) 184 x 104 x 115.2mm (7.24 x 4.09 x 4.54in)
Weight 2.1kg (4.6lbs)
Accessories Supplied with 1x rubber washer-8, 1x pendant tube washer, 1x spring washer-8and 1x M8*12 screw
WM07: Standard pendant mountDimensions (h x w x d) 348 × 104 × 138.6mm (13.7 × 4.1 × 5.5in)
Weight 1.5kg (3.3lbs)
Accessories Supplied with rubber washer-8×1, pendent tube washer×1, spring washer-8×1and M8*12 screw×1
WM02 /MD: Tube adapter*Application For mounting the indoor mini (IP) PTZ dome cameras, MD10A and MSD620, onto
a straight tube, CM01/ CM02
Diameter 140mm (5.5in)
Height 74mm (2.9in)
Weight 300g (10.58oz)
Accessories Supplied components: waterproof boot and hexagon key
WM02 /HD: Tube adapter*Application For mounting the indoor (IP) PTZ dome cameras, HD10A and HSD620, onto a
straight tube, CM01/CM02* The tube adapter (WM02) is a standard accessory supplied with the outdoor (IP) PTZ domes (MD12A, MSD622, HD12A, HD16AWDR, HSD622, HSD626)
WM04: Wall bracketAccessories For mounting of the BC14 and BC620 series
WM05: Corner standard mounting plateDimensions (h x w x d) 222 x 204 x 117mm (8.7 x 8 x 4.6in)
Weight 2kg (4.4lbs)
Accessories Supplied with: 4x washer-8, 4x spring washer and 4x M8*16 screw and 4x M8 nutCompatible with WM01A, WM07A brackets
WM06: Wall box mountingDimensions (h x w x d) 270 x 166 x 95mm (10.6 x 6.5 x 3.7in)
Weight 2.2kg (4.84lbs)
Accessories Supplied with: 4x washer-8, 4x spring washer and 4x M8*16 screwCompatible with WM01A, WM07A brackets
CC131.3m cable BNC/RS-485/power jacks 22 pins for WM07A, PM05 and CM02
CC13/IP1.3m cable BNC/audio/power jacks 22 pins for WM07A, PM05 and CM02
www.tkhsecurity.com
Technical SpecificationsWall Mount Accessories
PTM01: Pipe thread adapterApplication For adapting from a WM02 mounting interface to a standard 1 1/2” NPT pipe
thread mount
Ordering informationModels Description
WM01A Mini wall bracket
WM02 /MD* Tube adapter
WM02 /HD* Tube adapter
WM04 Bracket, wall
WM05 Corner standard mounting plate
WM06 Wall box mounting
WM07 Standard pendant mount* The tube adapter (WM02) is a standard accessory supplied with the outdoor (IP) PTZ domes (MD12A, MSD622, HD12A, HD16AWDR, HSD622, HSD626)
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsWall Mount Accessories
Description
Various lighting conditions and surveillance scenes requiredifferent shades and materials for optimal camera performance.TKH Security Solutions offers an array of Siqura dome covers toensure excellent image quality in diverse environs.
DC01, DC02, DC03 DC04 SS01
DC12 DC13, DC14
Dome Covers
DC01: Transparent and vandal-proof cover for MD10, MSD620Application For the indoor mini (IP) PTZ domes MD10A and MSD620. A security screw set is
supplied with the vandal-proof cover.
Diameter 137mm (5.4in)
DC02: Transparent and vandal-proof cover for HD10A, HSD620Application For the indoor (IP) PTZ domes HD10A and HSD620
Diameter 137mm (5.4in)
DC03: Transparent and vandal-proof cover for MD12A, MSD622Application For the outdoor mini (IP) PTZ domes MD12A and MSD622.A security screw set is
supplied with the vandal-proof cover.
Diameter 137mm (5.4in)
DC04: Transparent and vandal-proof cover for HD12A, HSD622,HD16AWDR and HSD626Application For (IP) PTZ domes HD12A, HSD622, HD16AWDR and HSD626. A security screw
set is supplied with the vandal-proof cover.
Diameter 137mm (5.4in)
DC12: Smoke cover for HD10A, HSD620Application For indoor (IP) PTZ domes HD10A and HSD620
Diameter 137mm (5.4in)
DC13: Smoke cover for MD12A and MSD622Application For outdoor mini (IP) PTZ domes MD12A and MSD622
Diameter 137mm (5.4in)
DC14: Smoke cover for HD12A and HSD622, HD16AWDR andHSD626Application For outdoor mini (IP) PTZ domes HD12A and HSD622, HD16AWDR and HSD626
Diameter 137mm (5.4in)
SS01/MD: SunshieldApplication Standard for outdoor mini (IP) PTZ domes MD12A and MSD622
Colour White
Height 89.9mm (3.54in)
Diameter 190mm (7.48in)
Weight 150g (5.29oz)
SS01/HD: SunshieldApplication Standard for outdoor mini (IP) PTZ domes HD12A, HSD622, and HSD626
Colour White
Height 129.5mm (5.05in)
Diameter 190mm (7.48in)
Weight 150g (5.29oz)
www.tkhsecurity.com
Technical SpecificationsDome Covers
Ordering informationModels Description
DC01 Transparent and vandal-proof cover for MD10A, MSD620
DC02 Transparent and vandal-proof cover for HD10A, HSD620
DC03 Transparent and vandal-proof cover for MD12A, MSD622
DC04 Transparent and vandal-proof cover for HD12A, HD16AWDR, HSD622, HSD626
DC12 Smoke cover for HD10A, HSD620
DC13 Smoke cover for MD12A, MSD622
DC14 Smoke cover for for HD12A, HD16AWDR, HSD622, HSD626
SS01/MD Sunshield for MD/MSD
SS01/HD Sunshield for HD/HSD
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsDome Covers
Description
The Siqura® Multifunction Monitor (MFM) combines an analogvideo tester, PTZ camera controller, and IP digital video testerinto a single handheld and easy-to-use device. Its ultra-bright,high-resolution 3.5’’ colour LCD touch screen and its many usefulfunctions for analog and IP applications make the MultifunctionMonitor an ideal tool for installers and field technicians. Iteliminates the need to balance on a ladder with a laptop or,alternatively, use a remote PC to check the camera’s field of viewand video quality.
Working with the Multifunction Monitor, camera adjustments canbe made conveniently and efficiently.
Widest supported camera rangeThe Multifunction Monitor supports a wide range of both analogPTZ cameras as well as IP Cameras. Using UPnP discovery, theMFM can auto-detect and connect to all Siqura equipment in thesame domain and can even control Siqura network PTZ cameras,in addition to multiple third-party cameras. With its ONVIFcompatibility, the MFM is a true Open System support tool.
Additional features• RS-485 interface for PTZ and multi protocol support• PoE meter function; UTP cable test• Audio in/speaker out• High capacity lithium battery
Multifunction MonitorHandheld Camera Setup Monitor
Features
• 3.5“ colour LCD touch panel with QVGA resolution
• Zoom for precise focusing of IP cameras up to 5MP
• IEEE 802.3af/at PSE function to power IP camera
• Supports Siqura® cameras/codecs and many third-partyIP cameras
• IP PTZ control for Siqura cameras
• Saves snapshots and video clips to memory
• NTSC/PAL analog video input
Audio/videoField display Colour, 3.5”, 320 × 240 pixels
Video input BNC ×1
Video signal format NTSC, PAL
Video level 1 Vpp, 140IRE
Audio input Line-in
Audio output Built-in speaker, phone jack Ø3.5mm
CameraAnalog PTZ
PTZ control RS-485
RS-485 ports R+, R-, T+, T
PTZ camera setting Pan, tilt, zoom, manual focus, auto focus
Supported protocols Pelco D, Pelco P, AD422, DSCP, Panasonic_C, Panasonic_N. JVC, Fastrax2
IP
Connection RJ-45
UPnP-supported cameras/ codecs Siqura MD/MSD/HD/HSD series PTZ cameras, Siqura OSA codecs and serversincluding the S50, C50, S60E, and C60.
Other supported brands/ protocols ACTi, Arecont Vision, Axis, D-Link, DVTel, DynaColor, GE, IQinVision, Level One,ONVIF, Panasonic, Planet, Sanyo, Sony, Vivotek
AccessoriesIncluded accessories Wrist strap, carrying case, car charger, CAT 5 loopback connector, BNC cable,
stylus (removable), rubber sleeve, 12VDC adapter, UTP terminal block
www.tkhsecurity.com
Technical SpecificationsMultifunction Monitor
Power outputInput voltage 12VDC, 3A
Battery type 2x 3.7V Li-Ion, 2000mAh
Charge cycle at 80% capacity >300
Charge time 3.5h
Operating time 3h
PoE (bypass/power bank device) PoE LAN In (802.3af/at standard DC 48V in)
Power bankCAT 5 Ethernet pin usage 1,2,3,6 pin
Weight/ with batteries 311g/370g (0.68lbs/0.81lbs)
Battery type 4x 3.7V Li-Ion, 2200mAh
Charge cycle at 80% capacity >300
Charge time 3h
Operation time ~8h
Operating temperature 0°C to +70°C (+32°F to +158°F)
Dimensions (h x w x d) 130 x 81 x 22mm (5.1 x 3.2 x 0.9in)
Input voltage range 12VDC +/- 10%, 5A
Output voltage range PoE 45~57VDC/12VDC
Wattage output Up to 25.5W
Other functionsPTZ data communication RS-485
CAT 5 cable detection Straight/cross cables, open, short, miswire
PoE meter function Watts, current, voltage
USB USB 2.0
Storage MicroSD HC card supported
Snapshot/video clip Internal memory, MicroSD, USB
MechanicalDimensions (h x w x d) 99 × 38 × 170mm (3.9 x 1.5 x 6.7in)
Weight (with batteries) 450g (1.0lb)
Ordering informationModels Description
MFM-2 Multifunction monitor, installation tool for IP and analog cameras
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsMultifunction Monitor
Description
Varifocal lensesSiqura® varifocal lenses are the ideal solution for almost allinstallations. Easily adjustable and easy to instal, they requirelittle or no knowledge and training. All varifocal lenses offer amaximum flexibility as they can be adjusted to match the exactscene required by the end user. All Siqura lenses are auto–iris,direct drive lenses, so they can automatically control the picture’slight and adjust to variations. The Siqura varifocal lens seriescovers a wide range of views, from 1.8mm (almost fisheye) to40mm for close-up views.
CS-mountThe Siqura lenses are CS mount and fit on Siqura BC-series CSmount cameras.*
F-stopA low f-stop or aperture, (e.g. f1.0), means the lens can passmore light, allowing the camera to produce a better image underdark conditions. However, a high f-stop will prevent the camerafrom “whitening” where there is a lot of light and gives a largerdepth of field.
IR-corrected“Day/Night” cameras, such as the Siqura BC14WDR and BC620,normally operate in the near-infrared/infrared zones at night. IR-corrected lenses are manufactured with special glass andcoating. This combination allows the lens to deliver perfect focusin normal lighting and also under IR illumination by transmittingmore light from the infrared region. As a result, refocusing is notrequired when using infrared lighting.
MegapixelMegapixel lenses offer minimal distortion and therefore provideexcellent optical performance from the center to the corners.
LensesVarifocal lenses
Features
• CS-Mount
• DC auto-iris
• Varifocal
• Options: IR-corrected; megapixel
Optical
Optical VL01 VL11 VL12 VL22 VL31IR-corrected - - - Yes -
Megapixel - - - - -
Mount CS-mount CS-mount CS-mount CS-mount CS-mount
Focal length (mm) 1.8-3.6 2.9-8.2 2.9-8.2 2.8-12 8.5-40
Back focal length (mm) tele 10.5 14.0 19.2 10.6
Back focal length (mm)wide 7.0 7.8 7.8 7.2 9.0
Flange back length (mm) 12.5 12.5 12.5 12.5 12.5
Maximum aperture ratio 1:1.6 1:1.0 1:1.0 1:1.3 1:1.3
Effective lens aperture(mm) Front ø22.0 ø18.8 ø19.0 ø23.0 ø27.0
Effective lens aperture(mm) Rear ø7.9 ø9.0 ø8.5 ø7.4 ø9.3
Operation range iris F1.6-F360C F1.0-F360C F1.0-F360C F1.3-F360C F1.3-F360C
Maximum image format(mm) 4.8 x 3.6 (ø6) 4.8 x 3.6 (ø6) 4.8 x 3.6 (ø6) 4.8 x 3.6 (ø6) 4.8 x 3.6 (ø6)
Operation range focus 0.2m-∞ 0.5m-∞ 0.5m-∞ 0.3m-∞ 0.8m-∞
Operation range zoom 1.8-3.6 2.9-8.2 2.9-8.2 2.8-12 8.5-40
Iris control DC auto iris
Control focus Manual
Control zoom Manual
Angle of view (º) with a1/3” camera - D 173.8-99.0 133.9-44.2 125.6-44.7 133.0-29.7 43.9-8.9
Angle of view (º) with a1/3” camera - H 144.2-79.4 98.3-35.2 95.0 35.6 33.5-7.1
Angle of view (º) with a1/3” camera - V 109.4-59.6 70.7-26.3 69.0-26.7 74.2-17.8 24.4-5.3
Dimensions (mm) ø37.4x42.6x51 ø33.5x46.6x44.3 ø33.5x46.6x44.3 ø37.5x48x56 ø41.7x57.5x62.9
Weight (g) 83 54 54 74 115
Operating temperature -20°C to +50°C(-4°F to +122°F)
-10 °C to +50 °C(+14 °F to +122 °F)
-10 °C to +50 °C(+14 °F to +122 °F)
-10 °C to +50 °C(+14 °F to +122 °F)
-20°C to +50°C(-4°F to +122°F)
www.tkhsecurity.com
Technical SpecificationsLenses
Optical
Optical VL23 VL24 VL32 VL34IR-corrected Yes
Megapixel Yes
Mount CS-mount CS-mount CS-mount C-mount
Focal length (mm) 2.8-12 3-8 5-50 8-80
Back focal length (mm) tele 19.2 7.8 7.46 13.32
Back focal length (mm)wide 7.2 7.8 7.52 15.65
Flange back length (mm) 12.5 12.5 12.5 17.526
Maximum aperture ratio 1:1.3 1:1.2 1:1.6 1:1.6
Effective lens aperture(mm) Front ø23.0 ø20.9 ø26.0 ø38.0
Effective lens aperture(mm) Rear ø7.4 ø10.5 7.4ø ø12.0
Operation range iris F1.3-F360C F1.2-F360C F1.6-T360 F1.6-T360
Maximum image format(mm) 4.8x3.6 (ø6) 4.8x3.6 (ø6) 4.8x3.6 (ø6) 6.4x4.8 (ø8)
Operation range focus 0.3m-∞ 0.3m-∞ 0.3m-∞ 1.5m-∞
Operation range zoom 2.8-12 3-8 5-50 8-80
Iris control DC auto iris
Control focus Manual
Control zoom Manual
Angle of view (º) with a1/3” camera - D 133.0-29.7 115.8-43.9 75.95-5.67 43.47-4.09
Angle of view (º) with a1/3” camera - H 102.2-23.7 90.7-35.2 51.17-5.30 34.58-3.32
Angle of view (º) with a1/3” camera - V 74.2-17.8 67.3-26.5 39.36-4.07 26.35-2.39
Dimensions ø37.5x48x56mm ø37x48.2x55mm ø40.5x55.2x58.6mm ø54.0x66.1x89.2mm
Weight 74g 61g 85g 85g
Operating temperature -10 °C to +50 °C (+14 °Fto +122 °F)
Ordering InformationModels Description
VL01 1/3”, 1.8-3.6mm, f1.6, DC auto iris
VL11 1/3”, 2.9-8.2mm, f1.0, DC auto iris
VL12 1/3”, 2.9-8.2mm, f1.0, DC auto iris, IR-corrected
VL22 1/3”, 2.8-12mm, f1.3, DC auto iris, IR-corrected
VL23 1/3”, 2.8-12mm, f1.3, DCauto iris , IR-corrected, 1.3MP
VL24 1/3”, 3-8mm f1.2,auto iris , IR-corrected, 3.0MP
VL31 1/3”, 8.5-40mm, f1.3, DC auto iris, IR-corrected
VL32 1/3”, 5.0-50.0mm, f1.6, DC auto iris, IR-corrected, 1.3MP
VL34* 1/2”, 8.0-80.0mm, f1.6, DC auto iris, IR-corrected, 3.0MP
* The VL-34 is a C-mount lens
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsLenses
Description
The Siqura® Surveillance Controller provides control of all SiquraIP dome cameras connected to Siqura Operator Office orOperator Storage including variable speed control and full pan/tilt/zoom operation. The Siqura Surveillance Controller includes athree-axis hall effect joystick in a small and compact design.
USB interfaceFeaturing a USB interface, the Siqura Surveillance Controllerintegrates seamlessly with any IP surveillance software platformcompatible with Microsoft’s DirectX runtime. Simply attach thecontroller and the system is operational. No additionalprogramming is required.
Program keysThe Siqura Surveillance Controller’s programmable buttons makeit easy to program and control even the largest systems withoutmemorising system commands (e.g., presets).
Surveillance Controller
Features
• Small compact design
• 3D joystick with hall effect
• Variable speed pan/tilt/zoom control
• Plug-and-Play installation
• USB interface
ControlPTZ control interface(s) Hall effect joystick
Protocol USB 2.0, DirectX
System requirementsSupported operating systems Windows XP, 2000
PoweringInput voltage 5VDC (USB)
Power consumption <0.5W
EnvironmentalOperating temperature -40°C to +80°C (-40°F to +176°F)
Safety and EMC IEC/EN 55024:1998; IEC/EN 55022, FCC Part 15
MechanicalDimensions (h x w x d) 127.76 x 158.46 x 168.66mm (5.03 x 6.16 x 6.64in)
Weight 440g (15.45oz)
Ordering informationModels Description
Surveillance Controller IP desktop USB controller with 3D hall effect
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsSurveillance Controller
Description
The Siqura® S-50 E video server is a versatile and cost-effectivesolution, available in compact (MSA) housing. Utilising MPEG-4and MJPEG, it features low-latency, low-bandwidth and DVDquality MPEG-4 video and low-frame-rate MJPEG. It also featuressimultaneous streaming at different resolutions and frame rates.
Image quality monitor and tampering alarmThe S-50 E is fitted with video analytics to check the health ofconnected cameras. This image quality monitor analysescontrast, exposure, sharpness and noise. Camera tamperinganalytics detect any changes in the camera’s position or field ofview. The instant a camera is subject to failure or tampering, analert can be raised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
Open Streaming Architecture (OSA)The S-50 E is designed with OSA offering standardised streamingvideo and remote control based on international standards andtested with different vendors. A comprehensive HTTP API givesaccess to all controls and makes integration easy. In addition, theS-50 E supports the unique Siqura® MX™ protocol.
Fiber optionThe S-50 E is available with an optional pluggable SFP slot foreither multi-mode or single-mode fiber optic connections.
Triple streaming per channelThe versatile S-50 E encoder is capable of streaming twoMPEG-4 and one MJPEG stream simultaneously. Each stream isoptimised for its purpose, low bandwidth MPEG-4 for storageand low-resolution MJPEG for web applications or remotedevices such as PDAs.
Audio, data, and I/O contactsCombining streaming video with duplex audio, serial data, andI/O contacts over IP, the S-50 E provides all the interfacesnecessary for any CCTV application (CD-quality stereo audio, lip–sync audio, PTZ control, alarm contacts, access control, etc.).Internal video motion detection (VMD) can be used forautomated security solutions or event-triggered storage.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® S-50 E is field-upgradeable.
S-50 E -MSAMPEG-4/MJPEG video server
Features
• MPEG-4 and MJPEG video encoder
• Image quality monitor and tamper detector
• Enhanced video quality
• Open Streaming Architecture
• Triple-streaming support
• Duplex serial data and stereo audio
• Video motion detection
x1
x2
2x/1x
Stereo
VideoNumber of channels 1x PAL/NTSC (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) MJPEG, MPEG-4 (ISO/IEC 14496-2, ISMA comp.)
Types of streaming UDP/IP multicast and/or unicast, TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Input impedance 75Ω/Hi-Z selectable
Video motion detection Yes (user-defined masking)
Encoding latency <130ms
Supported resolutions D1, ½D1, 2CIF, CIF, QCIF, VGA
GOP structure I, IP (selectable)
Frame rate 1 to 30 fps
Triple streaming:*
25/30fps MPEG-4 1x D1 + 1x 2CIF + MJPEG
25/30fps MPEG-4/MJPEG 1x D1 + 1x D1 + MJPEG
Output data rate 56kb/s to 20Mb/s (CBR or VBR selectable/user profiles)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Live-view encoder HTTP, FTP pull, FTP push
Connector type 75Ω BNC (gold-plated center pin)*Indicated combinations are based on 100% DSP capacity.
DataNumber of channels 2 full-duplex
Number of streams 2 x 3 multicast and/or unicast
Data interfaces 1x RS-232, 1x RS-422/485 (2- or 4-wire)
Stream TCP/UDP/MX configurable
Data rate 300b/s to 230.4kb/s
Connector type RJ-45
Contact closuresNumber of channels 2xin , 1x out
Number of streams 2 x 3 (multicast and/or unicast)
Output Fail-safe, potential-free
Connector type 5-pin screw terminal
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device
Protocols MPEG-4 ES, (M)JPEG, RTP, RTCP, RTSP, TCP, UDP, IP, DHCP, IGMPv2, (S)NTP,MX/IP, HTTP, SNMP v2, FTP, TelNet, DiffServ, SAP, UPnP
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsS-50 E -MSA
AudioNumber of channels 2 (stereo, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 8kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ (600Ω balanced, S-50 E only)
Output impedance <100Ω (balanced, S-50 E only)
Connector type 3.5mm stereo jack
ManagementLED status indicators
PWR Power-on indicator (green)
VID Video present
LNK Ethernet link operational
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
Power requirementsPower consumption <5W
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC with ferrules or PSR-12 DC)
S-50 E-MSA/PoE IEEE 802.3af
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalHousing Mini standalone
Dimensions (h x w x d) 34 x 86 x 111mm (1.3 x 3.4 x 4.4in)
Weight 300g (10.54oz)
Ordering informationModels Description
S-50 E-MSA MPEG-4/MJPEG video server with audio, data, and CCs, compact
S-50 E-MSA/SFP MPEG-4/MJPEG video server with audio, data, and CCs; empty 100MB SFP slot, compact
S-50 E-MSA/PoE MPEG-4/MJPEG video server with audio, data, and CCs; Power over Ethernet
Be sure to choose the correct power adapter for your region by adding /US for the Americas, /EU for Europe, or /UK for the UK.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsS-50 E -MSA
Description
The Siqura® S-54 E 4-channel video server is an open, compact,and cost-effective solution for IP video monitoring applications. Italso offers low latency, low bandwidth, and DVD-quality MPEG-4video and, easy to decode, low frame rate MJPEG. Each channelcan transmit these streams simultaneously, at differentresolutions and frame rates.
Image quality monitor and tampering alarmThe S-54 E is fitted with video analytics to check the health ofconnected cameras. This image quality monitor analysescontrast, exposure, sharpness and noise. Camera tamperinganalytics detect any changes in the camera’s position or field ofview. The instant a camera is subject to failure or tampering, analert can be raised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
Open Streaming Architecture (OSA)The S-54 E is designed with OSA offering standardised streamingvideo and remote control based on international standards andtested with different vendors. A comprehensive HTTP API givesaccess to all controls and makes integration easy. In addition, theS-54 E supports the unique Siqura® MX™ protocol.
Triple streaming per channelThe versatile S-54 E encoder is capable of streaming MPEG-2,MPEG-4, and MJPEG simultaneously. Each stream is optimisedfor its purpose, e.g. high quality MPEG-2 live viewing, lowbandwidth MPEG-4 storage, and low-resolution MJPEG for webapplications or remote devices (e.g. PDAs).
DataBy combining streaming video with serial data over IP, the S-54 Eprovides the necessary interface for any CCTV application.Internal video motion detection can be used for automatedsecurity solutions or event-triggered storage.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® S-54 E is field-upgradeable.
FTP pushUpon an event the S-54 E can post a JPG image to a remoteserver via one or two FTP servers. The event can be triggeredexternally, by VMD, the Image Quality Monitor, TamperDetector, etc. Or it can upload images to the remote server(s)periodically.
S-54 E4-channel MPEG-4/MJPEG video server
Features
• 4-channel MPEG-4/MJPEG video server
• Compact design for high density video
• Image quality monitor and tamper detector
• Adaptive de-interlacing for enhanced quality
• Open Streaming Architecture
• Triple-streaming support
• Duplex serial data
• Video motion detection
x4
x1
Fiber optionThe S-54 E is available with an optional pluggable SFP slot fordirect to fiber connections. The XSNet range of SFP devicesoffers a variety of multi-mode or single-mode fibre solutions.
Technical Specifications
VideoNumber of channels 4x PAL/NTSC (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) MJPEG, MPEG-4 (ISO/ IEC 14496-2, ISMA comp.)
Types of streaming UDP/IP (multicast and/or unicast), TCP/IP (RTP over RTSP)
Number of output streams Up to 20 per channel
Input impedance 75Ω/Hi-Z selectable
Video motion detection Yes (user-defined masking)
Encoding latency <130ms
Resolution D1, ½D1, 2CIF, CIF, QCIF, VGA
GOP structure I, IP (selectable/user profiles)
Frame rate 1 to 30 fps
Triple streaming*
25/30fps MPEG-4 1x D1 + 1x 2CIF + MJPEG
25/30fps MPEG-4/MJPEG 1x D1 + 1x D1 + MJPEG
Output data rate 56kb/s to 14Mb/s per channel (CBR or VBR)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Live-view encoder HTTP, FTP pull, FTP push
Connector type 75Ω BNC (gold-plated center pin)*Indicated combinations are based on 100% DSP capacity.
DataNumber of channels 1x full-duplex
Number of streams 2 x 4 multicast and/or unicast
Data interfaces 1x RS-422/485 (2- or 4-wire)
Number of streams 4x TX, 4x RX; TCP/UDP/MX configurable
Data rate 300b/s to 115kb/s
Connector type RJ-45
www.tkhsecurity.com
S-54 E
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device
Protocols MPEG-4 ES, (M)JPEG, RTP, RTCP, RTSP, TCP, UDP, IP, DHCP, IGMPv2, (S)NTP,MX/IP, HTTP, SNMP v2, FTP, TelNet, DiffServ, SAP, UPnP
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input (red)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <9W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC or PSR-12DC)
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
S-54 E 4-channel MPEG-4/MJPEG video encoder with data
S-54 E /SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsS-54 E
Description
The unique Siqura® S-60 D-MC multi-codec video decoderdecodes most streams effortlessly. With its automatic formatdetection, it can decode most H.264, MPEG-2, and MPEG-4streams. It’s an open, low latency, and cost-effective decodersolution for IP video CCTV applications producing crystal clearand highly detailed images.
Audio, data, and I/O contactsCombining streaming video with duplex audio, serial data, andI/O contacts over IP, the S-60 D-MC provides all the interfacesnecessary for any CCTV application (CD-quality stereo audio, lip–sync audio, PTZ control, alarm contacts, access control, etc.).Internal video motion detection (VMD) can be used forautomated security solutions or event-triggered storage.
Fiber optionThe S-60 D-MC is available with an optional pluggable SFP slotfor direct to fiber connections. The XSNet range of SFP devicesoffers a variety of multi-mode or single-mode fibre solutions.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® S-60 D-MC is field-upgradeable.
S-60 D-MCVideo decoder
Features
• Cost-effective multi-codec video decoder
• Supports H.264, MPEG-2, or MPEG-4 formats
• Duplex serial data and stereo audio
• 3-level access control
• SNMP and network time (NTP) support
• Remotely upgradeable
x1
x2
x2
Stereo
VideoVideo output 1x PAL/NTSC (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) H.264 BP (ISO/IEC 14496-10) MPEG-4, MPEG-2 (ISO/IEC 14496-2)
Types of streaming UDP/IP (multicast and/or unicast)
Output impedance 75Ω/Hi-Z selectable
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Live-view encoder HTTP, FTP pull
Connector type 75Ω BNC (gold-plated center pin)
DataNumber of channels 2 full-duplex
Number of streams 2 x 3 (multicast and/or unicast)
Interface(s) 1x RS-232, 1x RS-422/485 (2- or 4-wire)
Types of streaming TCP/UDP/MX configurable
Data rate 300b/s to 230.4kb/s
Connector type RJ-45
Contact closuresNumber of channels 2x in, 2x out
Number of streams 2 x 3 (multicast and/or unicast)
Output Fail-safe, potential-free
Connector type RJ-45
Transmission interfaceNumber of interfaces 1
Interface 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex, 10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device
Protocols H.264 BP, MPEG-4 ES, (M)JPEG, RTP, TCP, UDP, IP, DHCP, IGMPv2, (S)NTP,MX/IP, HTTP, SNMP v2, FTP, TelNet, SAP, UPnP
Connector type RJ-45
AudioNumber of channels 2 (stereo, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ or 600Ω balanced
Output impedance <100Ω balanced
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsS-60 D-MC
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input (red)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <5W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC or PSR-12DC)
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
S-60 D-MC Multi-codec video decoder with audio, data, and CCs
S-60 D-MC-SFP Multi-codec video decoder with audio, data, and CCs; empty 100MB SFP slot
S-60 D...../SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsS-60 D-MC
Description
The unique Siqura® S-60 E video server combines H.264 videoencoding with MPEG-4 or MJPEG. It offers an open, cost-effective solution for IP video CCTV applications. The S-60 Efeatures high quality H.264 and MPEG-4 streaming video, lowbandwidth, low latency, and interoperability with most othersystems.
Open Streaming Architecture (OSA)The S-60 E is designed with OSA offering standardised streamingvideo and remote control based on international standards andtested with different vendors. A comprehensive HTTP API givesaccess to all controls and makes integration easy. In addition, theS-60 E supports the unique Siqura® MX™ protocol.
Fiber optionThe S-60 E is available with an optional pluggable SFP slot foreither multi-mode or single-mode fiber optic connections.
Triple streaming per channelThe versatile S-60 E encoder is capable of streaming MPEG-2,MPEG-4, and MJPEG simultaneously. Each stream is optimisedfor its purpose, e.g. high quality MPEG-2 live viewing, lowbandwidth MPEG-4 storage, and low-resolution MJPEG for webapplications or remote devices (e.g. PDAs). The H.264implementation is based on dedicated hardware resulting inunparalleled video quality.
Audio, data, and I/O contactsCombining streaming video with duplex audio, serial data, andI/O contacts over IP, the S-60 E provides all the interfacesnecessary for any CCTV application (CD-quality stereo audio, lip–sync audio, PTZ control, alarm contacts, access control, etc.).Internal video motion detection (VMD) can be used forautomated security solutions or event-triggered storage.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® S-60 E is field-upgradeable.
S-60 EH.264/MPEG-4/MJPEG video server
Features
• Cost-effective H.264 video encoder
• Open Streaming Architecture
• Triple-streaming support
• Simultaneous H.264, MPEG-4/MJPEG
• Duplex serial data and stereo audio
• Video motion detection
x1
x2
x2/x2
Stereo
DataNumber of channels 2 full-duplex
Number of streams 2 x 3 (multicast and/or unicast)
Interface(s) 1x RS-232, 1x RS-422/485 (2- or 4-wire)
Stream TCP/UDP/MX configurable
Data rate 300b/s to 230.4kb/s
Connector type RJ-45
VideoNumber of channels 1x PAL/NTSC (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) H.264 BP (ISO/ IEC 14496-10) MJPEG, MPEG-4 (ISO/IEC 14496-2,ISMA comp.)
Types of streaming UDP/IP (multicast and/or unicast)
Number of output streams Up to 20
Input impedance 75Ω/Hi-Z selectable
Video motion detection Yes (user-defined masking)
Encoding latency <130ms
Resolution D1, ½D1, 2CIF, CIF, QCIF, VGA
GOP structure I, IP (selectable)
Frame rate 1 to 30 fps
Dual streaming D1 at 30fps H.264 + D1 at 30fps MPEG-4 + MJPEG
Output data rate 56kb/s to 20Mb/s (CBR or VBR selectable/user profiles)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Live-view encoder HTTP, FTP pull
Connector type 75Ω BNC (gold-plated center pin)
Contact closuresNumber of channels 2x in, 2x out
Number of streams 2 x 3 (multicast and/or unicast)
Output Fail-safe, potential-free
Connector type RJ-45
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device
Protocols H.264 BP, MPEG-4 ES, (M)JPEG, RTP, RTCP, RTSP, TCP, UDP, IP, DHCP,IGMPv2, (S) NTP, MX/IP, HTTP, SNMP v2, FTP, TelNet, DiffServ, SAP, UPnP
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsS-60 E
AudioNumber of channels 2 (stereo, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ or 600Ω balanced
Output impedance <100Ω balanced
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input (red)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <5W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC or PSR-12DC)
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
S-60 E H.264/MPEG-4/MJPEG video encoder with audio, data, and CCs
S-60 E-SFP H.264/MPEG-4/MJPEG video encoder with audio, data, and CCs; empty 100MB SFP slot
S-60 E...../SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsS-60 E
Description
The Siqura® is a versatile, and cost-effective 4-channel H.264video server featuring low-latency and crystal-clear highlydetailed video.
Open Streaming Architecture (OSA)The is designed with OSA offering standardised streaming videoand remote control based on international standards and testedwith different vendors. A comprehensive HTTP API gives accessto all controls and makes integration easy. In addition, thesupports the unique Siqura® MX™ protocol.
Triple streaming per channelThe versatile encoder is capable of streaming MPEG-2, MPEG-4,and MJPEG simultaneously. Each stream is optimised for itspurpose, e.g. high quality MPEG-2 live viewing, low bandwidthMPEG-4 storage, and low-resolution MJPEG for web applicationsor remote devices (e.g. PDAs).
DataBy combining streaming video with serial data over IP, theprovides the necessary interface for any CCTV application.Internal video motion detection can be used for automatedsecurity solutions or event-triggered storage.
Camera health checkThe is fitted with a unique feature that checks the health of thecamera. This image quality monitor analyses contrast, exposure,sharpness and noise, and immediately alerts an operator for anymalfunctioning. Camera tampering algorithms make acomparison with predefined reference images to detect anychanges in position or field of view, such as if the camerabecomes partially or fully blocked, or if mock-up images areplaced in front. The camera health check ensures that theappropriate authorities are notified the instant a camera is nolonger usable due to failure or tampering.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® is field-upgradeable.
S-64E4-channel H.264 Video Server
Features
• 4-channel H.264 video server
• Open Streaming Architecture
• 2x D1 at 30fps H.264 + MJPEG
• Duplex serial data
• Video motion detection
• Camera Health Check
• Tamper Detection
x2
x4
VideoNumber of channels 4x PAL/NTSC autodetect
Input level 1Vpp (±3dB)
Compression algorithm(s) H.264 (ISO/ IEC 14496-10)
Types of streaming UDP/IP (unicast, multicast, multi-unicast)
Number of output streams Up to 20
Input impedance 75Ω or Hi-Z
Encoding latency <130ms
Sampling resolution D1, 2/3D1, ½D1, 2CIF, CIF, QCIF, VGA
GOP structure I, IP
Frame rate 1 to 30 fps
Number of encoders 2x H.264 (each D1 at 30fps maximum) + MJPEG (LiveView) per input
Output data rate 56kb/s up to 4Mb/s per encoder (2 per input)
Video parameters Contrast, brightness, hue and saturation
On-screen display 3x text lines (fully configurable), 1x graphical image (BMP, GIF or JPEG)
Live-view encoder HTTP stream or “pull”
Connector type 75Ω BNC (gold-plated center pin)
DataNumber of channels 1 full-duplex
Number of interfaces 1x RS-422/485 (2- or 4-wire)
Stream TCP/UDP/MX configurable
Data rate 300b/s to 115kb/s
Connector type RJ-45
Video analyticsVideo motion detection Based on movement detection in free-drawn ROI, per input
Camera health checkTamper detection In free-drawn ROI: blocked and partially blocked view, spraying, cloaking,
changed position, per input
Image quality monitor In free-drawn ROI: focus, contrast, exposure and noise measurement per input
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb selectable
SFP option Empty SFP slot for 100Mbps SFP device
Protocols H.264 BP, (M)JPEG, RTP, RTSP, RTCP, DHCP, SNMPv3/v2, IGMPv2, NTP, HTTP,SAP, UPnP, DiffServ, TelNet, FTP
Connector type RJ-45
ManagementLED status indicators Power-on and operational
Network management and control SNMP, MX™, HTTP API (v1.5), HTML (password protected)
www.tkhsecurity.com
Technical SpecificationsS-64E
PoweringPower consumption 7.5W at 12VDC
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Extended Temperature (XT) option -40°C to +74°C (-40°F to +165°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC EN 50155, EN 50121-3-2, in conformity with CE regulations, UL
Vibration and shock EN 50155, EN61373
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
S-64 E 4-channel H.264/MJPEG video encoder with data
S-64 E-XT 4-channel H.264/MJPEG video encoder with data and extended temperature range
S-64 E-SFP 4-channel H.264/MJPEG video encoder with data and empty 100MB SFP slot
S-64 E /SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsS-64E
Description
The Siqura® S-68 E H.264 video server is an open, versatile, andcost-effective 8-channel solution for IP video monitoringapplications. Utilising the full power of H.264 the S-68 E featureslow-latency, crystal clear, and highly detailed video.
Image quality monitor and tampering alarmThe S-68 E is fitted with video analytics to check the health ofconnected cameras. This image quality monitor analysescontrast, exposure, sharpness and noise. Camera tamperinganalytics detect any changes in the camera’s position or field ofview. The instant a camera is subject to failure or tampering, analert can be raised.
Motion Adaptive De-interlacing (M.A.D.)Modern flat LCD monitors show artifacts with standard PAL orNTSC video. Standard de-interlacing schemes throw away half ofthe vertical resolution. Siqura developed a sophisticated de-interlacing scheme, which preserves the vertical resolution instatic images while filtering the interlacing artifacts aroundmoving objects. This scheme is called Motion Adaptive De-interlacing or M.A.D™ and results in superior video images withsmooth edges.
High channel countThe S-68 E offers the perfect solution for systems with highchannel counts. With 11 units fitting in a single MC 11 powersupply cabinet this encoder provides 88 video channels per 3RUof a 19” rack. The S-68 E clusters eight channels (encoders) undereach IP address.
Open Streaming Architecture (OSA)The S-68 E is designed with OSA offering standardised streamingvideo and remote control based on international standards andtested with different vendors. A comprehensive HTTP API givesaccess to all controls and makes integration easy. In addition, theS-68 E supports the unique Siqura® MX™ protocol.
DataBy combining streaming video with serial data over IP, the S-68 Eprovides the necessary interface for any CCTV application.Internal video motion detection can be used for automatedsecurity solutions or event-triggered storage.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® S-68 E is field-upgradeable.
S-68 E8-channel H.264 Video Server
Features
• Compact 8-channel H.264 video server
• Very high density video input solution (up to 88-channels per 3U 19” rack)
• Open Streaming Architecture
• Image quality monitor and tamper detector
• Adaptive de-interlacing for enhanced quality
• Duplex serial data
• Video motion detection per channel
• 3-level access control
• SNMP and network time (NTP) support
• Remotely upgradeable
x8
x2
VideoNumber of channels 8x NTSC, PAL
Input level 1Vpp (±3dB)
Compression algorithm(s) H.264 (ISO/ IEC 14496-10) + MJPEG
Types of streaming UDP/IP (unicast, multicast, multi-unicast) TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Input impedance 75Ω or Hi-Z
Encoding latency <130ms
Resolution D1, 2/3D1, ½D1, 2CIF, CIF, QCIF, VGA
GOP structure I, IP
Frame rate 1 to 30 fps
Number of encoders 1x H.264 + MJPEG (LiveView) per input
Output data rate 56kb/s up to 4Mb/s per input
Video parameters Contrast, brightness, hue and saturation
On-screen display 3x text lines (fully configurable), 1x graphical image (BMP, GIF or JPEG)
Live-view encoder HTTP, FTP pull, FTP push
Connector type 75Ω BNC (gold-plated center pin)
DataNumber of channels 1 full-duplex
Number of interfaces 1x RS-422/485 (2- or 4-wire)
Stream TCP/UDP/MX configurable
Data rate 300b/s to 115kb/s
Connector type RJ-45
Video analyticsVideo motion detection Based on movement detection in free-drawn ROI, per input
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb selectable
SFP option Empty SFP slot for 100Mbps SFP device
Protocols H.264 BP, (M)JPEG, RTP, RTSP, RTCP, DHCP, SNMPv3/v2, IGMPv2, NTP, HTTP,SAP, UPnP, DiffServ, TelNet, FTP
Connector type RJ-45
ManagementLED status indicators Power-on and operational
Network management and control SNMP, MX™, HTTP API (v1.5), HTML (password protected)
PoweringPower consumption 7.5W at 12VDC
www.tkhsecurity.com
Technical SpecificationsS-68 E
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC EN 50155, EN 50121-3-2, in conformity with CE regulations, UL
Vibration and shock EN 50155, EN61373
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
S-68 E 8-channel H.264/MJPEG video encoder with data
S-68 E/SFP 8-channel H.264/MJPEG video encoder with data, empty 100MB SFP slot
S-68 E/SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsS-68 E
Description
The unique Siqura® S620 E video server combines H.264 videoencoding with MPEG-4 or MJPEG. It offers an open, cost-effective solution for IP video CCTV applications. The S620 Efeatures dual-streaming H.264 with dual-streaming MPEG-4 orMJPEG, low bandwidth, low latency, and interoperability withmost other systems.
Open Streaming Architecture (OSA) and ONVIFThe S620 E, designed with OSA, offers standardised streamingvideo and remote control based on a comprehensive HTTP APIgiving access to all controls and making integration easy.Additionally, the S620 E fully supports ONVIF. It has been testedto support ONVIF Profile S.
Fiber and EoC optionsThe S620 E is available with an optional pluggable SFP slot foreither multi-mode or single-mode connections, or in combinationwith the Siqura® ECO-plug for Ethernet over Coax.
Image quality monitor and tampering alarmThe S620 E is fitted with video analytics to check the health ofconnected cameras. This image quality monitor analysescontrast, exposure, sharpness and noise. Camera tamperinganalytics detect any changes in the camera’s position or field ofview. The instant a camera is subject to failure or tampering, analert can be raised.
Quad multi-codecThe versatile S620 E encoder is capable of streaming 2x H.264full frame rate. It is also capable of streaming 2x MPEG-2,MPEG-4 or MJPEG simultaneously. Each stream is optimised forits purpose, e.g., high-quality H.264 or MPEG-2 for live viewing,low-bandwidth MPEG-4 for storage, or easy to decode MJPEGfor web applications or remote devices. The H.264implementation is based on dedicated hardware resulting inunparalleled video quality.
Audio, data, and I/O contactsCombining streaming video with duplex audio, serial data, andI/O contacts over IP, the S620 E provides all the interfacesnecessary for any CCTV application (CD-quality stereo audio, lip–sync audio, PTZ control, alarm contacts, access control, etc.).Internal video motion detection (VMD) can be used forautomated security solutions or event-triggered storage.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® S620 E is field-upgradeable.
S620 EH.264/MPEG-4 Video Encoder
Features
• Cost-effective dual H.264 video encoder
• 2x D1 at 30fps H.264 + MPEG4/MJPEG
• Image quality monitor and tamper detector
• ONVIF Profile S
• Duplex serial data and stereo audio
• Video motion detection
x1
x2
x2/x2
x2
VideoNumber of channels per unit 1x PAL/NTSC (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) H.264 BP/MP (ISO/IEC 14496-10), MJPEG, MPEG-4 (ISO/IEC 14496-2, ISMAcomp.)
Types of streaming UDP/IP (multicast and/or unicast) or TCP/IP (RTP, RTP-RTSP, RTP-RTSP-HTTP)
Number of output streams Up to 20
Input impedance 75Ω/Hi-Z selectable
Video motion detection Yes (user-defined masking)
Privacy masks 10 (user-defined)
Encoding latency <130ms typ.
Resolution D1, ½D1, 4CIF, 2CIF, CIF, VGA
GOP structure I, IP selectable
Frame rate 1 to 30 fps
Quad streaming 2x H.264 (each D1 at 30fps) 2x MPEG-4/MJPEG
Output data rate 56kb/s to 20Mb/s (CBR or VBR selectable/user profiles)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Live-view encoder (M)JPEG HTTP, FTP pull, FTP push
Connector type 1 Vpp/ 75Ω BNC (gold-plated center pin)
DataNumber of channels 2 full-duplex
Number of streams 2 x 3 (multicast and/or unicast)
Number of interfaces 1x RS-232 1x RS-422/485 (2- or 4-wire)
Stream TCP/UDP/MX configurable
Data rate 300b/s to 230.4kb/s
Connector type RJ-45
Contact closuresNumber of channels 2x in, 2x out
Number of streams 2 x 3 (multicast and/or unicast)
Output Fail-safe, potential-free
Connector type RJ-45
Transmission interfaceNumber of interfaces 1
Interface 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device or ECO-plug
Protocols H.264 BP/MP, MPEG-4 ES, (M)JPEG, RTP, RTCP, RTSP, TCP, UDP, IP, DHCP,IGMPv2, (S)NTP, MX/ IP, HTTP, SNMP v2, FTP, TelNet,DiffServ, SAP, UPnP,ONVIF
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsS620 E
AudioNumber of channels 2 (stereo, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ or 600Ω balanced
Output impedance <100Ω balanced
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input or output (red)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <5W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC with ferrules or PSR-12 DC)
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
S620 E H.264/MPEG-4/MJPEG video encoder with audio, data, and CCs
S620 E-SFP H.264/MPEG-4/MJPEG video encoder with audio, data, and CCs; empty 100MB SFP slot
S620 E.../SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsS620 E
Description
The Siqura® C-50 E-MC multi-codec video server is an open,versatile, and cost-effective solution for extreme outdoorapplications. It features low-latency, crystal-clear, and highlydetailed MPEG-2 video, DVD-quality MPEG-4 video and lowframe rate MJPEG. All streams simultaneous, at differentresolutions and frame rates.
Image quality monitor and tampering alarmThe C-50 E-MC is fitted with video analytics to check the healthof connected cameras. This image quality monitor analysescontrast, exposure, sharpness and noise. Camera tamperinganalytics detect any changes in the camera’s position or field ofview. The instant a camera is subject to failure or tampering, analert can be raised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
Open Streaming Architecture (OSA)The C-50 E-MC is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.In addition, the C-50 E-MC supports the unique Siqura® MX™protocol.
Triple streaming per channelThe versatile C-50 E-MC encoder is capable of streamingMPEG-2, MPEG-4, and MJPEG simultaneously. Each stream isoptimised for its purpose, e.g. high quality MPEG-2 live viewing,low bandwidth MPEG-4 storage, and low-resolution MJPEG forweb applications or remote devices (e.g. PDAs).
Audio, data, and I/O contactsCombining streaming video with duplex audio, serial data, andI/O contacts over IP, the C-50 E-MC provides all the interfacesnecessary for any CCTV application (CD-quality stereo audio, lip–sync audio, PTZ control, alarm contacts, access control, etc.).Internal video motion detection (VMD) can be used forautomated security solutions or event-triggered storage.
Fiber optionThe C-50 E-MC is available with an optional pluggable SFP slotfor connections via fiber optic cable (SFP). A range of multi-modeor single-mode XSNet™ SFP devices fit the empty SFP slot.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® C-50 E-MC is field-upgradeable.
C-50 E-MCMulti-codec video encoder
Features
• Multi-codec video encoder, MPEG-2, MPEG-4, andMJPEG
• Image quality monitor and tamper detector
• Enhanced video quality
• Open Streaming Architecture
• Triple-streaming support
• Duplex serial data and stereo audio
• Field-hardened
• Video motion detection
x1
x2
x2/x2
Stereo
VideoNumber of channels 1x NTSC, PAL (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) MPEG-2 (ISO/IEC 13818-2), MJPEG, MPEG-4 (ISO/IEC 14496-2, ISMA comp.)
Types of streaming UDP/IP (multicast and/or unicast) TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Input impedance 75Ω/Hi-Z selectable
Video motion detection Yes (user-defined masking)
Encoding latency <130ms
Resolution D1, 2/3D1, ½D1, 2CIF, CIF, QCIF, VGA
GOP structure I, IP (selectable/user profiles)
Frame rate 1 to 30 fps
Triple streaming*
25/30fps MPEG-2 2x D1 + MJPEG
25/30fps MPEG-4 1x D1 + 1x 2CIF + MJPEG
25/30fps MPEG-2/MPEG-4 1x 2/3D1 + 1x 2/3D1 + MJPEG
Output data rate 56kb/s to 20Mb/s (CBR or VBR selectable/user profiles)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Live-view encoder HTTP, FTP pull, FTP push
Connector type 75Ω BNC (gold-plated center pin)*Indicated combinations are based on 100% DSP capacity.
DataNumber of channels 2 full-duplex
Number of streams 2 x 3 (multicast and/or unicast)
Data interfaces 1x RS-232, 1x RS-422/485 (2- or 4-wire)
Stream TCP/UDP/MX configurable
Data rate 300b/s to 230.4kb/s
Connector type RJ-45
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device
Protocols MPEG-4 ES, MPEG-2 TS, MPEG-2 ES, (M)JPEG, RTP, RTCP, RTSP, TCP, UDP, IP,DHCP, IGMPv2, (S)NTP, MX/IP, HTTP, SNMP v2, FTP, TelNet, DiffServ, SAP,UPnP
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsC-50 E-MC
AudioNumber of channels 2 (stereo, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ or 600Ω balanced
Output impedance <100Ω balanced
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input (red)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <5W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC or PSR-12DC)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
C-50 E-MC MPEG-2/-4/MJPEG video encoder with audio, data, and CCs
C-50 E-MC-SFP MPEG-2/-4/MJPEG video encoder with audio, data, and CCs; empty 100MB SFP slot
C-50 E-MC..../SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsC-50 E-MC
Description
The Siqura® C-54 E-MC multi-codec video server is an open,versatile, and cost-effective 4-channel solution for IP videomonitoring applications, even under extreme outdoor conditions.Utilizing the full power of MPEG-2, MPEG-4, and MJPEG, theC-54 E-MC features low-latency, crystal clear, and highly detailedMPEG-2 video; low bandwidth, DVD-quality MPEG-4 video; easyto decode, low frame rate MJPEG. Each channel can transmitthese streams simultaneously, at different resolutions and framerates.
Image quality monitor and tampering alarmThe C-54 E-MC is fitted with video analytics to check the healthof connected cameras. This image quality monitor analysescontrast, exposure, sharpness and noise. Camera tamperinganalytics detect any changes in the camera’s position or field ofview. The instant a camera is subject to failure or tampering, analert can be raised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
Open Streaming Architecture (OSA)The C-54 E-MC is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.In addition, the C-54 E-MC supports the unique Siqura® MX™protocol.
Triple streaming per channelThe versatile C-54 E-MC encoder is capable of streamingMPEG-2, MPEG-4, and MJPEG simultaneously. Each stream isoptimised for its purpose, e.g. high quality MPEG-2 live viewing,low bandwidth MPEG-4 storage, and low-resolution MJPEG forweb applications or remote devices (e.g. PDAs).
DataBy combining streaming video with serial data over IP, the C-54E-MC provides the necessary interface for any CCTV application.Internal video motion detection can be used for automatedsecurity solutions or event-triggered storage.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® C-54 E-MC is field-upgradeable.
C-54 E-MCMulti-codec video encoder
Features
• 4-channel multi-codec video server
• Simultaneous MPEG-2, MPEG-4, and MJPEG
• Compact field-hardened design for high-density video
• Image quality monitor and tamper detector
• Adaptive de-interlacing for enhanced quality
• Open Streaming Architecture
• Triple-streaming support
• Duplex serial data
• Video motion detection
x4
x1
FTP pushUpon an event the C-54 E-MC can post a JPG image to a remoteserver via one or two FTP servers. The event can be triggeredexternally, by VMD, the Image Quality Monitor, TamperDetector, etc. Or it can upload images to the remote server(s)periodically.
Fiber optionThe C-54 E-MC is available with an optional pluggable SFP slotfor direct to fiber connections. The XSNet range of SFP devicesoffers a variety of multi-mode or single-mode fibre solutions.
Technical Specifications
VideoNumber of channels 4x PAL/NTSC (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) MPEG-2 (ISO/ IEC 13818-2), MJPEG, MPEG-4 (ISO/ IEC 14496-2, ISMA comp.)
Types of streaming UDP/IP (multicast and/or unicast), TCP/IP (RTP over RTSP)
Number of output streams Up to 20 per channel
Input impedance 75Ω/Hi-Z selectable
Video motion detection Yes (user-defined masking)
Encoding latency <130ms
Sampling resolution D1, ½D1, 2CIF, CIF, QCIF, VGA
GOP structure I, IP (selectable)
Frame rate 1 to 30 fps
Triple streaming*
25/30 fps MPEG-2 2x D1 + MJPEG
25/30 fps MPEG-4 1x D1 + 1x 2CIF + MJPEG
25/30 fps MPEG-2/MPEG-4 1x 2/3D1 + 1x 2/3D1 + MJPEG
Output data rate Up to 14Mb/s per channel (CBR or VBR selectable)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Live-view encoder HTTP, FTP pull, FTP push
Connector type 75Ω BNC (gold-plated center pin)
DataNumber of channels 1 full-duplex
Number of streams 2 x 4 (multicast and/or unicast)
Number of interfaces 1x RS-422/485 (2- or 4-wire)
Stream 4x TX, 4x RX; TCP/UDP/MX configurable
Output data rate 300b/s to 115kb/s
Connector type RJ-45
www.tkhsecurity.com
C-54 E-MC
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device
Protocols H.264 BP, MPEG-4 ES, (M)JPEG, RTP, RTCP, RTSP, TCP, UDP, IP, DHCP,IGMPv2, (S) NTP, MX/IP, HTTP, SNMP v2, FTP, TelNet, DiffServ, SAP, UPnP
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input (red)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <9W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC or PSR-12DC)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
C-54 E-MC 4-channel MPEG-2/-4/MJPEGvideo encoder with data
C-54 E-MC /SFP 4-channel MPEG-2/-4/MJPEG video encoder with data and empty 100MB SFP slot
C-54 E-MC /SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsC-54 E-MC
Description
The Siqura® C-60 E-MC multi-codec video server combines H.264, MPEG-2, MPEG-4, and MJPEG video encoding. It’s anopen, cost-effective solution designed to operate under extremeconditions. The C-60 E-MC features crystal clear, highly detailed,and low bandwidth video and is interoperable with most existingsystems.
Image quality monitor and tampering alarmThe C-60 E-MC is fitted with video analytics to check the healthof connected cameras. This image quality monitor analysescontrast, exposure, sharpness and noise. Camera tamperinganalytics detect any changes in the camera’s position or field ofview. The instant a camera is subject to failure or tampering, analert can be raised.
Enhanced video qualityModern flat LCD monitors show artefacts with standard PAL orNTSC video. Standard de-interlacing loses half of the verticalresolution. Siqura’s sophisticated de-interlacing schemeoptimises vertical resolution resulting in superior video imageswithout artefacts.
Open Streaming Architecture (OSA)The C-60 E-MC is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.In addition, the C-60 E-MC supports the unique Siqura® MX™protocol.
Quad-streaming per channelThe C-60 E-MC encoder is capable of streaming H.264, MPEG-2,MPEG-4, and MJPEG simultaneously. Each stream is optimisedfor its purpose, e.g. high-quality H.264 or MPEG-2 live viewing,low bandwidth H.264 or MPEG-4 storage, and low resolutionMJPEG for web applications or remote devices. The H.264implementation is based on dedicated hardware resulting inunparalleled video quality.
Audio, data, and I/O contactsCombining streaming video with duplex audio, serial data, andI/O contacts over IP, the C-60 E-MC provides all the interfacesnecessary for any CCTV application (CD-quality stereo audio, lip–sync audio, PTZ control, alarm contacts, access control, etc.).Internal video motion detection (VMD) can be used forautomated security solutions or event-triggered storage.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® C-60 E-MC is field-upgradeable.
Fiber optionThe C-60 E-MC is available with an optional pluggable SFP slotfor either multi-mode or single-mode fiber optic connections.
C-60 E-MCH.264 multi-codec video encoder
Features
• Multi-codec video encoder, supporting H.264, MPEG-2,MPEG-4, and MJPEG
• Image quality monitor and tamper detector
• Field-hardened
• Open Streaming Architecture
• Quad-stream support
• Duplex serial data and stereo audio
• Video motion detection
x1
x2
x2/x2
Stereo
VideoNumber of channels 1x PAL/NTSC (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) H.264 BP (ISO/IEC 14496-10) MPEG-2 (ISO/IEC 13818-2), MJPEG, MPEG-4(ISO/IEC 14496-2, ISMA comp.)
Types of streaming UDP/IP (multicast and/or unicast) TCP/IP (RTP over RTSP)
Number of output streams Up to 20
Input impedance 75Ω/Hi-Z selectable
Video motion detection Yes (user-defined masking)
Encoding latency <130ms
Image resolutions D1, 2/3D1, ½D1, 2CIF, CIF, QCIF, VGA
GOP structure I, IP (selectable/user profiles)
Frame rate 1 to 30 fps
Quad streaming* D1 at 30fps H.264 + 2/3D1 at 30fps MPEG-2** + 2/3D1 at 30fps MPEG-4 + CIFat 1fps MJPEG
Output data rate 56kb/s to 20Mb/s (CBR or VBR selectable/user profiles)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Live-view encoder HTTP, FTP pull, FTP push
Connector type 75Ω BNC (gold-plated center pin)*Indicated combinations are based on 100% DSP capacity.
DataNumber of channels 2 full-duplex
Number of streams 2 x 3 (multicast and/or unicast)
Interface(s) 1x RS-232, 1x RS-422/485 (2- or 4-wire)
Types of streaming TCP/UDP/MX configurable
Data rate 300b/s to 230.4kb/s
Connector type RJ-45
Contact closuresNumber of channels 2x in, 2x out
Number of streams 2 x 3 (multicast and/or unicast)
Output Fail-safe, potential-free
Connector type RJ-45
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device
Protocols H.264 BP, MPEG-4 ES, MPEG-2 TS, MPEG-2 ES, (M)JPEG, RTP, RTCP, RTSP,TCP, UDP, IP, DHCP, IGMPv2, (S)NTP, MX/ IP, HTTP, SNMP v2, FTP,TelNet,DiffServ, SAP, UPnP
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsC-60 E-MC
AudioNumber of channels 2 (stereo, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ or 600Ω balanced
Output impedance <100Ω balanced
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input (red)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <5W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC or PSR-12DC)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
C-60 E-MC H.264/MPEG-2/-4/MJPEG video encoder with audio, data, and CCs
C-60 E-MC-SFP H.264/MPEG-2/-4/MJPEG video encoder with audio, data, and CCs; empty 100MB SFP slot
C-60 E....../SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsC-60 E-MC
Description
The unique Siqura® C620 E video server combines H.264 videoencoding with MPEG-2, MPEG-4 or MJPEG. It offers an open,cost-effective solution for IP video CCTV applications. The C620E features dual-streaming H.264 with dual-streaming MPEG-2,MPEG-4 or MJPEG, low bandwidth, low latency, andinteroperability with most other systems.
Open Streaming Architecture (OSA) and ONVIFThe C620 E, designed with OSA, offers standardised streamingvideo and remote control based on a comprehensive HTTP APIgiving access to all controls and making integration easy.Additionally, the C620 E fully supports ONVIF. It has been testedto support ONVIF Profile S.
Fiber and EoC optionsThe C620 E is available with an optional pluggable SFP slot foreither multi-mode or single-mode connections, or in combinationwith the Siqura® ECO-plug for Ethernet over Coax.
Image quality monitor and tampering alarmThe C620 E is fitted with video analytics to check the health ofconnected cameras. This image quality monitor analysescontrast, exposure, sharpness and noise. Camera tamperinganalytics detect any changes in the camera’s position or field ofview. The instant a camera is subject to failure or tampering, analert can be raised.
Quad multi-codecThe versatile C620 E encoder is capable of streaming 2x H.264full frame rate. It is also capable of streaming 2x MPEG-2,MPEG-4 or MJPEG simultaneously. Each stream is optimised forits purpose, e.g., high-quality H.264 or MPEG-2 for live viewing,low-bandwidth MPEG-4 for storage, or easy to decode MJPEGfor web applications or remote devices. The H.264implementation is based on dedicated hardware resulting inunparalleled video quality.
Audio, data, and I/O contactsCombining streaming video with duplex audio, serial data, andI/O contacts over IP, the C620 E provides all the interfacesnecessary for any CCTV application (CD-quality stereo audio, lip–sync audio, PTZ control, alarm contacts, access control, etc.).Internal video motion detection (VMD) can be used forautomated security solutions or event-triggered storage.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® C620 E is field-upgradeable.
C620 EH.264 Multicodec Video Encoder
Features
• Cost-effective dual H.264 video encoder
• 2x D1 at 30fps H.264 + MPEG4/MJPEG/MPEG-2
• Field-hardened
• Open Streaming Architecture
• ONVIF Profile S
• Image quality monitor and tamper detector
• Duplex serial data and stereo audio
• Video motion detection
x1
x2
x2/x2
x2
VideoNumber of channels per unit 1x PAL/NTSC (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) H.264BP/ MP (ISO/IEC 14496-10) MPEG-2 (ISO/IEC 13818-2), MJPEG, MPEG-4(ISO/IEC 14496-2, ISMA comp.)
Types of streaming UDP/IP (multicast and/or unicast) or TCP/IP (RTP, RTP-RTSP, RTP-RTSP-HTTP)
Number of output streams Up to 20
Input impedance 75Ω/Hi-Z selectable
Video motion detection Yes (user-defined masking)
Privacy masks 10 (user-defined)
Encoding latency <130ms typ.
Resolution D1, ½D1, 4CIF, 2CIF, CIF, VGA
GOP structure I, IP selectable
Frame rate 1 to 30 fps
Quad streaming 2x H.264 (each D1 at 30fps) 2x MPEG-4/MPEG-2/MJPEG
Output data rate 56kb/s to 20Mb/s (CBR or VBR selectable/user profiles)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling)
Live-view encoder (M)JPEG HTTP, FTP pull, FTP push
Connector type 1 Vpp/ 75Ω BNC (gold-plated center pin)
DataNumber of channels 2 full-duplex
Number of streams 2 x 3 (multicast and/or unicast)
Number of interfaces 1x RS-232 1x RS-422/485 (2- or 4-wire)
Stream TCP/UDP/MX configurable
Data rate 300b/s to 230.4kb/s
Connector type RJ-45
Contact closuresNumber of channels 2x in, 2x out
Number of streams 2 x 3 (multicast and/or unicast)
Output Fail-safe, potential-free
Connector type RJ-45
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device or ECO-plug
Protocols H.264 BP/MP, MPEG-4 ES, MPEG-2 TS, MPEG-2 ES, (M)JPEG, RTP, RTCP, RTSP,TCP, UDP, IP, DHCP, IGMPv2, (S)NTP, MX/ IP, HTTP, SNMP v2, FTP,TelNet,DiffServ, SAP, UPnP, ONVIF
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsC620 E
AudioNumber of channels 2 (stereo, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ or 600Ω balanced
Output impedance <100Ω balanced
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input or output (red)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <5W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC with ferrules or PSR-12 DC)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
C620 E H.264/MPEG-4/MPEG-2/MJPEG video encoder with audio, data, and CCs
C620 E-SFP H.264/MPEG-4/MPEG-2/MJPEG video encoder with audio, data, and CCs; empty 100MB SFP slot
C620 E.../SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsC620 E
Description
The Siqura® TrafficServer™ offers a combination of incidentdetection, traffic data collection, and camera monitoring in asingle temperature-hardened module to assist traffic operators inreducing traffic jams and improving road safety. TheTrafficServer™ uses dedicated DSPs to simultaneously encodeand stream in different formats in real time with low latency andefficient bandwidth usage.
Automatic incident detection (AID)The TrafficServer™ generates relevant traffic data and incidentdetection information by analysing the incoming images. Therequired suite of functions, such as alerts on stopped vehicles,wrong-way drivers, pedestrians, lost cargo, smoke, and trafficflow data, can be set according to the application.
Open Streaming Architecture (OSA)The TrafficServer™ is designed with OSA offering standardisedstreaming video and remote control based on internationalstandards and tested with different vendors. A comprehensiveHTTP API gives access to all controls and makes integration easy.In addition, the TrafficServer™ supports the unique Siqura®
MX™ protocol.
Traffic data collection (/TDC only)The TrafficServer/TDC adds specific measurements with relationto traffic flow management (such as information on volume,speed, etc.) to the AID analytics. Traffic data and eventsgenerated by the detection analytics can be displayed in theimage, giving the operator a clear overview of the trafficsituation.
Multi-codec and multi-streamingThe versatile TrafficServer™ can simultaneously stream H.264,MPEG-2, MPEG-4, and MJPEG. Each stream is optimized for itspurpose. The power to choose between different videocompression algorithms ensures interoperability with existingapplications.
Audio, data, and I/O contactsCombining streaming video with duplex audio, serial data, andI/O contacts over IP, the TrafficServer™ provides all theinterfaces necessary for any CCTV application (CD-quality stereoaudio, lip–sync audio, PTZ control, alarm contacts, access control,etc.). Internal video motion detection (VMD) can be used forautomated security solutions or event-triggered storage.
Fiber optionThe TrafficServer™ is available with an optional pluggable SFPslot for direct to fiber connections. The XSNet range of SFPdevices offers a variety of multi-mode or single-mode fibresolutions.
TrafficServer™H.264 multi-codec with embedded AID
Features
• Traficon-powered Incident Detection- Stopped vehicle and wrong-way drivers- Smoke detection (in tunnels only)- Occupancy and flow speed- Speed drop and under speed- Pedestrians and lost cargo- Traffic data (volume, speed, etc)
• High-quality multi-codec video encoding- Triple streaming support- Low latency
• Field-hardened
• Audio, data, and digital I/O
x1
x2
x2/x2
Stereo
VideoNumber of channels 1x PAL/NTSC (Auto/PAL/NTSC)
Input level 1Vpp (±3dB)
Compression algorithm(s) H.264BP (ISO/IEC 14496-10) MPEG-2 (ISO/IEC 13818-2), MJPEG,MPEG-4(ISO/IEC 14496-2, ISMA comp.)
Types of streaming UDP/IP (multicast and/or unicast)
Number of output streams Up to 20
Input impedance 75Ω/Hi-Z selectable
Video motion detection Yes (user-defined masking)
Encoding latency <130ms
Resolution D1, 2/3D1, ½D1, 2CIF, CIF, QCIF, VGA
GOP structure I, IP (selectable/user profiles)
Frame rate 1 to 30 fps
Triple streaming* D1 at 30fps H.264 + D1 at 30fps MPEG-2 (GOP=1) + 2/3 D1 at 30fps MPEG-4
Output data rate Up to 20 Mb/s (CBR or VBR selectable/user profiles)
Video settings User profiles, contrast, brightness, colour saturation, hue, sharpness
On-screen display 3x text lines (configurable: position, colour, border/outline colour, font size)1x image in BMP, GIF, or JPEG format (configurable: position, scaling), AIDoverlay
Live-view encoder HTTP, FTP pull
Connector type 75Ω BNC (gold-plated center pin)*Indicated combinations are based on 100% DSP capacity.
DataNumber of channels 2 full-duplex
Number of streams 2 x 3 (multicast and/or unicast)
Interface(s) 1x RS-232, 1x RS-422/485 (2- or 4-wire)
Types of streaming TCP/UDP/MX configurable
Data rate 300b/s to 230.4kb/s
Connector type RJ-45
Contact closuresNumber of channels 2x in, 2x out
Number of streams 2 x 3 (multicast and/or unicast)
Output Fail-safe, potential-free
Connector type RJ-45
Transmission interfaceNumber of interfaces 1
Interface(s) 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device
Protocols H.264 BP, MPEG-4 ES, MPEG-2 TS, MPEG-2 ES, (M)JPEG, RTP, RTCP, RTSP,TCP, UDP, IP, DHCP, IGMPv2, (S)NTP, MX/ IP, HTTP, SNMP v2, FTP,TelNet,DiffServ, SAP, UPnP
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsTrafficServer™
AudioNumber of channels 2 (stereo, full-duplex)
Number of streams 3 (multicast and/or unicast)
Maximum bandwidth 20Hz to 20kHz
Sampling resolution 8/16-bits linear PCM or G.711
Input level Adjustable, mic or line
Output level Adjustable, 3Vrms maximum
Input impedance >20kΩ or 600Ω balanced
Output impedance <100Ω balanced
Connector type RJ-45
Embedded automatic incident detectionStopped vehicle 16 stop zones
Inverse direction 8 zones
Speed drop 8 zones
Levels of service Normal, dense, delayed, congested, stop and go (8 zones)
Pedestrian 16 zones
Debris/fallen object 16 zones
Smoke Only for tunnel applications
Embedded traffic data collection (/TDC only)Individual vehicle traffic data Timestamp, lane number, individual speed, classification gap time, length,
confidence
Integrated vehicle traffic data Volume (per class per lane, maximum 8 lanes), average speed (per class per lane),headway, gap time (per length class per lane), occupancy per lane, density(number of vehicles/km) per lane, average vehicle length per lane
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input (red)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <5W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC (PSA-UN12DC or PSR-12DC)
www.tkhsecurity.com
Technical SpecificationsTrafficServer™
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
TrafficServer H.264 multi-codec with embedded AID, audio, data, and CCs
TrafficServer-SFP H.264 multi-codec with embedded AID, audio, data, and CCs; empty 100MB SFP slot
TraffiServer /TDC H.264 multi-codec with AID and traffic data, audio, data, and CCs
TrafficServer/SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsTrafficServer™
Description
The unique Siqura® A-80 eight-channel audio and I/O card offersa compact solution for multiple audio and digital I/O (contactclosures) over IP. The A-80 adds audio and I/O to almost anyexisting or new CCTV solution.
AudioThe Siqura® A-80 adds eight separate bidirectional audiochannels to the CCTV system. The audio inputs support eitherline-level or microphone-level with additional biasing to powerelectric microphones. By using RTP/RTC in combination withnetwork time synchronisation (NTP) the audio streams can bemade lip-sync with almost any video stream.
Digital I/OEight digital inputs can be configured to ‘stream’ CC signals toe.g. the i-NVR or to activate a signal in the API. In addition theA-80 offers four digital outputs to connect with third-party PLCsor other telemetry systems. The digital output can be activatedthrough the API, internal triggers (alerts) or received CC-streams.
Open Streaming Architecture (OSA)The A-80 is designed with OSA offering standardised streamingvideo and remote control based on international standards andtested with different vendors. A comprehensive HTTP API givesaccess to all controls and makes integration easy. In addition, theA-80 supports the unique Siqura® MX™ protocol.
Fiber optionThe A-80 is available with an optional pluggable SFP slot forconnections via fiber optic cable (SFP). A range of multi-mode orsingle-mode XSNet™ SFP devices fit the empty SFP slot.
Web interfaceConfiguration, management, and live viewing are simplified bythe access-controlled web interface. Full in-band control isavailable through the Siqura® MX™ Configuration Tool Kit or theHTTP API. The Siqura® A-80 is field-upgradeable.
IP surveillance solutionsThe A-80 is part of Siqura’s complete collection of videosurveillance equipment and solutions. Siqura® offers videocodecs/servers, IP cameras, video management, networkstorage, and configuration software.
A-808-channel audio and I/O card
Features
• 8-channel bidirectional audio
• 8 digital inputs
• 4 digital outputs
• Comprehensive web interface
• Compact housing
• 3-level access control
• SNMP and network time (NTP) support
• Remotely upgradeable
x8
x8/x4
Contact closuresNumber of channels 8x in, 4x out
Number of streams 3 MX streams per input multicast and/or unicast
Output Fail-safe, open collector (OC)
Connector type screw terminal
Transmission interfaceNumber of interfaces 1
Interface 10/100Base-TX Fast Ethernet, autonegotiation, half-duplex/ full-duplex,10/100Mb
SFP option Empty SFP slot for 100Mbps SFP device
Protocols RTP, RTCP, RTSP, TCP, UDP, IP, DHCP, IGMPv2, (S)NTP, MX/IP, HTTP, SNMP v2,FTP
Connector type RJ-45
AudioNumber of channels 8 (mono, full-duplex)
Number of streams 5 RTSP maximum or 3 MX streams per input, multicast and/or unicast
Maximum bandwidth 20Hz to 8kHz
Compression G.711 (a- or μ-law)
Input level Adjustable, mic or line (phantom powered)
Output level Adjustable, 3Vrms maximum
Input impedance 600Ω /> 20kΩ balanced (selectable)
Output impedance <100Ω unbalanced
Connector type screw terminal
ManagementLED status indicators
DC Power-on indicator (green)
Sync All links are operational (green); failure in RX stream(s) (yellow); failure in TXstream(s) (red)
Ethernet port Green LED: on = 100Mb, off = 10Mb; amber LED: on = link okay, flashes withactivity
Network management and control SNMP v2, MX™, HTTP API, HTML (password protected)
PoweringPower consumption <6W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 19VDC(PSA-UN12DC or PSR-12DC)
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
www.tkhsecurity.com
Technical SpecificationsA-80
MechanicalDimensions (h x w x d) 128 x 34 x 190mm (5.04 x 1.34 x 7.5in)
Weight 450g (15.80oz)
Housing Rack-mount or standalone
Ordering informationModels Description
A-80 8-channel audio and digital I/O card
A-80 SFP 8-channel audio and digital I/O card with empty 100MB SFP slot
A-80...../SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsA-80
Description
iProtect™ offers a highly reliable and fully integrated web-basedsecurity management system for access control, camerasurveillance, intrusion detection, parking management, intercomcommunication, and time and attendance registration.
Remote managementUsers can manage their iProtect™ system through a standardWeb browser, so system administration can be carried out fromany location anywhere in the world. Through the ‘My iProtect’functionality, each employee can have a personalised userinterface for simple and efficient operation.
Safe workstation managementIntelligent data encryption minimises the likelihood of someonehacking into information. iProtect™ uses the Secure Socket Layer(SSL) protocol to encrypt all the data traffic between the systemhub and the workstations. SSL is the standard for securecommunication over the Internet and is used by high-riskwebsites, such as e-banking and e-commerce sites.
Multiple site applicationsiProtect™ centralises security management for applicationsspanning multiple locations. Through TCP/IP communication,iProtect™ connects various sites employing different networks,from LAN and WAN to ADSL, ISDN, and UMTS. As a result,several offices or branches can be managed centrally using justone iProtect™ system.
Unique report generatoriProtect™ makes it easy to compile and present information in aclear and concise style. Generating reports in PDF format allowsusers to efficiently save, file, or e-mail system details, as required.
BufferingThe Polyx network controller guarantees that bufferedtransactions reach their destinations. Connecting an emergencypower battery to Polyx ensures system reliability at all times andunder any circumstances.
PoE/PoE+A Power over Ethernet (PoE) connection supplies power and dataover a standard UTP cable to network devices, such as videocameras, network controllers, card readers, and locks.
End-to-end securityEnd-to-end security protects the entire system and preventshackers from tampering with its operation. In combination withDESFire EV1 smart cards and the new generation of card readers,you can rest assured that your security management system issafe and sound from start to finish.
Open standards create flexibilitySince iProtect™ is based on open standards, it is easy tointegrate with third-party systems and applications. Additionally,this open standard policy facilitates connections between thesystem and databases, such as those containing personnelinformation or building administration.
Support from start to finishiProtect™ includes support for users, from project planning andinstallation through to technical guidance, training, andconsultancy during and after deployment.
iProtect™High-end security management system
Features
• Integrated security management solution for:- Access control- Intrusion detection- Video surveillance- Intercom and parking management
• Visitor registration
• Key map with interactive plan
• Key badge and smart card printing
• I/O management
• Alarm management for all disciplines
For more information Please contact your local sales representative for more information.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsiProtect™
Description
The substation is an essential part of the iProtect™ integratedsecurity management system. To a large extent, it determines theflexibility, service life, and continuity of the entire solution.
Communication over large distancesThe iPU–8 runs on a µLinux platform. It communicates with thecentral system via TCP/IP and can be included in every existingEthernet network without additional cabling. The iPU-8 is alsosuitable for communication via VPN/ADSL. In this way, networkcomponents separated by large distances can still be part of oneintegrated system.
Guaranteed deliveryIf data traffic is too heavy or network failure occurs, databuffering is necessary. The iPU-8 has a transaction buffer foraccess control of up to 40,000 events. It ensures with 100%certainty that the buffered transactions will reach the system hub.
Ensured powerIt is possible to attach an emergency power battery to the iPU-8.The iPU-8 measures both the mains voltage and the battery, so itdetects potential problems early on. This guarantees secureoperation under all conditions.
Local intelligenceThe iPU-8 grants access locally and manages all the linkedperipherals independently of the central system. This is veryadvantageous in the event of a communication failure. It alsoallows the iPU-8 to connect to the central system via an IPconnection and to only periodically communicate with the systemhub.
Ease of installationThe iPU-8 is configured through the central software system,which reduces the installation and utilisation costs. Moreover, adiagnostic function is included in the iPU-8 firmware, so theinstaller can test the complete installation locally using a laptop.
Maintenance and materialsThe iPU-8 requires no maintenance and the electronics are cast ina moulding resin.
iPU-8Processing unit
Features
• Part of the iProtect™ Security Management System
• µCLinux platform
• Transaction buffer for access control of 40,000 events
• Zero maintenance
• IP network compatible
• Centrally configurable via the software system
MechanicalHousing Aluminium extrusion profile; electronics cast in PUR synthetic resin
Dimensions (h x w x d) 240 x 120 x 30mm
Installation Click onto rail 35mm (NEN-EN 50022)
Management system iProtect™ Security Management System
PoweringShort-circuit resistant Yes
Voltage 16.5~28VDC
Cabling UTP Cat 5 or 6
Power consumption 3W
Emergency power Connection for battery (12V, 2Ah)
Recommended Universal iPU-8 power supply (NB: Do not use as combined power supply forother equipment.)
EnvironmentalOperating temperature -20°C to +60°C (-4°F to +140°F)
Relative humidity <95% with no condensation
CommunicationNumber of readers Maximum of 16 per iPU-8
Connecting readers Orbit-1: maximum of 8 readers; Orbit-2: maximum of 16 readers
Number of I/O Maximum of 96x I/O per iPU-8
Connecting I/O Orbit I/O: maximum of 12x I/O
Orbit 8 ports for connection to reader interface; Orbit-1, Orbit-2, or Orbit I/O: RJ-45socket; Profibus; maximum distance of 1200 meters
System hub 1 communication port for connecting to system hub: RJ-45 socket (EthernetTCP/IP)
PC/laptop 1 communication port for connecting to PC/laptop: RJ-45 socket (RS-232)
Buffer for access Minimum of 40,000 transactions
Buffer for combination use Minimum of 15,000 transactions
SystemSupported operating systems Linux
Ethernet interface 10/100Mb autonegotiation
Sabotage inputs 2x sabotage inputs available (case and cover)
Diagnostic LEDs All input and output ports
Support iProtect version > 6.03
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsiPU-8
Description
Transferring large amounts of data at high speeds over a networkrequires a secure solution. Mifare® safeguards and storesinformation on a single card or tag and is characterised by itsrapid data transaction speed.
Securing information by sectorThe Mifare® chip contains 16 or 32 separate sectors, dependingon the memory card (either 1K or 4K). The first sector is typicallyused for storing directory information. The remaining sectors canbe used for storing access control or balance information. Eachsector is locked with a security key, making it possible to useseparate sectors for different applications.
Ideal for payment applicationsThe advanced security features prevent unauthorised reading ofcard data, brute force attacks, sniffing, and forwarding oftransmitted data. This consequently makes Mifare® exceptionallysuitable for payment applications.
CardsMifare® cards comply with the ISO 7810 credit card size and canbe printed with text, a logo and/ or a photo. If required the cardscan be supplied with a HiCo magnetic stripe on the back.
TagsThe small size of the Mifare® transponder permits it to be usedinto tags. The black epoxy tags are robust and have theadvantage that they can be worn on a key ring. Various othershapes and sizes are available upon demand.
Durable solutionAs a result of contactless reading and writing, the chances offailure due to wear is very limited. The applied CMOS technologyof the card and tag transponder ensures 100,000 writing cyclesand a 10-year data retention period under normal operatingconditions.
MultifunctionalThe same card or tag can be used at once for a variety ofapplications such as access control, paid parking, copying,storage of biometric data, public transport, time and attendance,and identification.
ReadersThere are two types of Mifare® readers, the PX007MF SNR andthe PX007 MF. Both readers have an operating range of 2 up to5cm. The demanded security levels for payment applicationslimit the operating distance. The Mifare® serial number readerreads the unique serial number of the Mifare® chip in the card ortag. The Mifare® sector reader offers an extra high security level.One of the sectors of the card or tag stores the identificationdata while the other sectors of the card remain untouched.
Mifare®Safe and swift proximity cards, tags, and readers
Features
• Mifare® Classic, Sector, Plus DESFire EV1
• Multifunctional
• Standard credit card size (ISO)
• Durable
• Suitable for payment applications
• Read/write distance of up to 1,000 meters
• Secure communication
ReadersCard reading principle/distance ISO/IEC 14443A-3/Mifare®/0~5cm
Frequency range 13.56MHz
Data transmission 106k baud
Power supply/current 5~12VDC
Current Average: 15~130mA; peak: 150~250mA (model dependent)
Housing Black polyurethane
Dimensions (h x w x d) 140 x 46 x 22mm
Operating temperature -20° to 65°C (-4° to 149°F)
Relative humidity 0~100% (condensation with sealed connections)
LED Indicators Power (green) and access (red) (controlled externally)
CableConnection Via plug with screw connections
Type 5 x 0.35mm 2 shielded (minimum); 8 x 0.35mm 2 shielded (maximum)
Maximum distance from the controller 20 metres
Proximity transpondersType/data transmission ISO/ IEC 14443A-3/ Mifare®/Contactless
Operating frequency/baud rate 13.56MHz/ 106kBaud
Transaction time Less than 100ms
Read/write distance Up to 1.000mm (antenna dependent)
Data integrity Fast anti-collision
Multiple card operation Fast anti-collision
Life cycle 100,000 writing cycles; 10-year data retention in operating temperatureconditions
Energy No battery; contactless energy
Chip technology High-speed CMOS EEPROM-process, single chip, one coil
Security mechanism Fast anti-collision protocol, individual access rights and keys for each block,mutual authentication according to ISO/IEC DIS 9798-2, encrypted data, securedata protocol with CRC, unique serial number, transport key
Memory 1K 1024 x 8 bit EEPROM of which 768 byte free for use divided into 16 sectors of 4blocks each; sector 0 reserved for manufacturer data, serial number, and MAD
Memory 4K 4096 x 8 bit EEPROM of which 3456 bytes free for use divided into 32 sectors of4 blocks each and 8 sectors of 16 blocks each (a block consists of 16 bytes);sector 0 reserved for manufacturer data, serial number, and MAD
CardsConnection Via plug with screw connections
Dimensions (h x w x d) 54 x 85.6 x 0.76 mm (according to ISO 7810)
Operating temperature -35 º to +50 ºC (-31º to 122ºF)
Relative humidity 0% to 90%, no condensation
Magnetic strip (optional) HiCo 3800 öerstedt
www.tkhsecurity.com
Technical SpecificationsMifare®
Proximity tagMaterial Epoxy EP 121
Dimensions (h x w x d) 245 x 31,5 x 0.16mm
Operating temperature -40°C to +85°C (-40°F to +185°F)
Relative humidity 90%
Colour Black
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsMifare®
Description
There are numerous kinds of access readers and just as manycommunication protocols, and every day new scanners areintroduced on the market. To enable our customers to use thelatest access scanners, TKH Security Solutions offers Orbit 1, 2,and I/O.
Flexible scanner interfaceThis universal scanner forms the link between the access scannerand the iPU-8 substation. Orbit supports a diversity of readertechnologies and provides an access control system with card orkey decoding, digital inputs and outputs, and data transmission.
Orbit 1 and Orbit 2The access scanner connects directly to Orbit. Orbit processesthe bits and bytes generated by the scanner into a recognisablecode, which it then transmits to the iPU-8 substation. Orbit canbe installed up to 20 metres away from the scanner.
Orbit 2 should be used in instances when it is convenient toplace two scanners in close proximity to each other. This scannerinterface has twice as many connections so that up to 16scanners can be connected to a single iPU-8 substation.
Orbit I/OOrbit I/O can be used when additional digital inputs and outputs(I/Os) are needed in the system. Orbit I/O has 12 freelyprogrammable input and output points. Orbit I/O should be usedwhen various I/O alarms and targets have to be arranged throughthe central management system.
Orbit and digital inputs and outputs (I/Os)Many installations have digital I/Os connected to them, whichcan carry out a variety of functions, such as monitoring the statusof a door. This kind of equipment can be linked directly to Orbit.Four inputs have been provided for this purpose. Only limitedcabling is needed and Orbit can manage the entire door areasince Orbit can be installed near a door or barrier.
InstallationOrbit communicates with the iPU-8 or Polyx ND+ via the Profibusprotocol. This makes it possible to instal Orbit at a considerabledistance from the iPU-8 substation (maximum of 1200 metres).Communication can occur via standard UTP or STP buildingcable networks, or via specially installed cables.
Orbit 1, 2, or I/O Door ControllerUniversal interface
Features
• Decodes the access card or key
• Provides digital I/Os
• Transmits data between the scanner and the iPU-8 orPolyx ND+ substation
PoweringCabling UTP Cat 5
Voltage
Orbit 1 8 to 24VDC (can be supplied by lock power supply)
Orbit 2 8 to 24VDC (can be supplied by lock power supply)
Orbit I/O 8 to 24VDC (can be supplied by lock power supply)
Consumption at 12V
Orbit 1 maximum 250mA, includes reader consumption of 200mA at 5.1V
Orbit 2 maximum 500mA, includes reader consumption of 200mA at 5.1V
Orbit I/O maximum 200mA
Consumption at 24V
Orbit 1 maximum 130mA, includes reader consumption of 200mA at 5.1V
Orbit 2 maximum 260mA, includes reader consumption of 200mA at 5.1V
Orbit I/O maximum 110mA
EnvironmentalOperating temperature -20°C to +60°C (-4°F to +140°F)
Relative humidity 0% to 90%, no condensation
MechanicalHousing Aluminium extrusion profile; electronic components cased in PUR synthetic resin
Dimensions (h x w x d)
Orbit 1 140 x 90 x 30mm
Orbit 2 240 x 90 x 30mm
Orbit I/O 140 x 90 x 30mm
Installation Click to 35mm rail, according to NEN-EN 50022
ReadersReader types
Orbit 1 Mifare®; SL4; DESFire®; magnetic card; PX007B (Hitag™); PX007A (EM4102)
Orbit 2 Mifare®; SL4; DESFire®; magnetic card; PX007B (Hitag™); PX007A (EM4102)
Orbit I/O N/A
Maximum number of readers per Orbit
Orbit 1 1
Orbit 2 2
Orbit I/O N/A
Maximum distance from reader to Orbit 20 metres
Maximum distance from Orbit to iPU-8 1200 metres
www.tkhsecurity.com
Technical SpecificationsOrbit 1, 2, or I/O Door Controller
Data exchangeReaders
Orbit 1 1 digital reader input with reader LED driver
Orbit 2 1 digital reader input with reader LED driver
Orbit I/O N/A
Inputs
Orbit 1 4
Orbit 2 8
Orbit I/O 12 freely programmable
Outputs
Orbit 1 2
Orbit 2 4
Orbit I/O 12 freely programmable
LEDs
Orbit 1 2 LEDs for data exchange detection; 6 LEDs for I/O status
Orbit 2 2 LEDs for data exchange detection;12 LEDs for I/O status
Orbit I/O 2 LEDs for data exchange detection;12 LEDs for I/O status
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsOrbit 1, 2, or I/O Door Controller
Description
The Polyx is a versatile and intelligent IP-based security solutionfor use as a network or door controller.
Reduce costsThe Polyx Network Controller makes it possible to use anyexisting IP network, which substantially reduces additionalcabling and installation costs.
Low powerThe Polyx Network Controller is designed to consume lessenergy and is an extremely low-power solution, with a powerconsumption of only 1.5W.
Network and door controlWhereas the interface between iPU-8 and Orbit used to becreated by conventional data cables, communication with a PolyxNetwork Controller is primarily over IP. This results in substantialsavings on cabling and installation costs.
PoE/ PoE+A Power over Ethernet (PoE) connection supplies power and dataover a standard UTP cable to network devices, such as videocameras, network controllers, card readers, locks, and the PolyxNetwork Controller. Using PoE does away with the need to usean extra power adaptor.
PoE can supply power to a Polyx Network Controller and twocard readers. It is also possible to power two slots from the PolyxNetwork Controller (maximum of 300mA per slot). In that case,the Polyx Network Controller must be powered with PoE+, whichcan supply a maximum of 30W. This makes it possible to use thePolyx Network Controller at locations where it is difficult to use asocket for the power supply.
End-to-end securityEnd-to-end security protects the entire system and preventshackers from tampering with its operation. In combination withDESFire EV1 smart cards and the new generation of card readers,you can rest assured that your Security Management System issafe and sound from start to finish.
Communication between field components and the iProtectsecurity management system is encrypted with AES 256. Eithertwo card readers or two Orbits can be connected to a Polyxnetwork controller.
Flexible solutionThe Polyx Network Controller creates a high level of flexibility,durability, and continuity in any security solution through an extraserial interface for additional connections. For example,connecting a SAM (Secure Access Module) can provideencryption keys for a hardware security system.
Two ways of using the Polyx Network ControllerThere are two ways of using Polyx and iPU-8. First, the Polyx andiPU-8 software can run on separate hardware platforms. Polyx hasthe capacity to read two high-end security card readers and tocontrol a maximum of 12 freely programmable inputs andoutputs. Secondly, both the Polyx and iPU-8 software systemscan run on the Polyx hardware platform. In this case,communication between the two systems runs over IP to the localhost. Polyx has the capacity to read two high-end security cardreaders and to control a maximum of 12 freely programmableinputs and outputs. Additionally, Polyx is able to connect existingOrbits (maximum of two). That makes it possible for you to takeover the existing hardware.
Polyx Network ControllerEnd-to-end IP security solutionPolyx Network ControllerEnd-to-end IP security solution
Features
• Innovative end-to-end security
• Cost savings on installation and cabling
• Low-power consumption
• 1-slot supply, 12VDC, 600mA
• Supports all market-compliant readers
• Direct serial reader connection (RS-422, 12VDC)
• Indirect reader connection (Orbit 1/2, Wiegand andABA)
Features
• Innovative end-to-end security
• Cost savings on installation and cabling
• Low-power consumption
• 1-slot supply, 12VDC, 600mA
• Supports all market-compliant readers
• Direct serial reader connection (RS-422, 12VDC)
• Indirect reader connection (Orbit 1/2, Wiegand andABA)
CommunicationRS-422 RJ-45 connector
RJ-45 connector pin assignments
Pin 1 RXA
Pin 2 RXB
Pin 3 TXZ
Pin 4 12VDC
Pin 5 Orbit sense
Pin 6 TXY
Pins 7 and 8 GND (common)
Processor Coldfire 5208, 32bits, 166MHZ, 159MFLOPS
Memory/flash 32MB DDR RAM/32MB flash
Supported operating systems μClinux 2.6
Ethernet 10/100Mbit (1000Mbit tolerant)
Card readerCard reader types Sirius or SmartID/ISO 14443-3 (RS-422/TCL)
Maximum number per Polyx 2
Distance card reader to Polyx Maximum of 50 metres
OrbitsCompatible Orbit types Orbit-I, Orbit-II, Orbit-I/O
Maximum number per Polyx 2
Distance Orbit to Polyx Maximum of 1200 metres
Network loadResting situation of the Polyx 832,972 bytes/sec./0.007 Mbit/sec
Continuous read 1,998,430 bytes/sec./0.016 Mbit/sec
PoweringVoltage 24V VDC, PoE, PoE+ class 3
Power consumption Up to 16W, depending on configuration
Port 2 and 3 12V, 250mA (short-circuit proof)
Port4 12V, 100mA (RS-232)
Inputs/ Outputs 12 I/O; maximum 1ADC/28V or 1A/28VDC
Lock Feed 12V, 600mA
EnvironmentalOperating temperature -20°C to +60°C (-4°F to +140°F) (in operation)
Relative humidity <95% with no condensation
www.tkhsecurity.com
Technical SpecificationsPolyx Network Controller
MechanicalHousing Aluminium extrusion profile, electronics cast into PUR synthetic resin
Board dimensions (h x w x d) 16 x 118 x 273mm
Casing dimensions (h x w x d) 30 x 120 x 280mm
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsPolyx Network Controller
Description
Sirius is a versatile and multifunctional card reader solution usingthe latest technology. Sirius can be used within the existing rangeof Orbit door controllers and Polyx network controllers.
Highly responsiveThe Sirius is equipped with a new antenna technology whichconsiderably increases the reading range. This also shortens theresponse time. As a result, there is virtually no delay whenopening a door.
Wide compatibility rangeSirius is compatible with a variety of passes and tags and offerscomprehensive proximity technology. You can choose fromMifare 1K, Mifare 4K, Mifare Mini, Plus, Mifare DESFire, MifareDESFire EV1, the Rijkspas, and ISO14443A reading technologies.It is also possible for the Sirius card reader to support severalreading principles at the same time.
Sturdy and stylish housingThe Sirius housing has a stylish stainless-steel look and has beenfinished with a hard top layer which improves the lifespan of thiscard reader. Its distinct design and integrated and clearly visiblelight guide ensure that the Sirius card reader fits in well in anymodern environment.
End-to-end securityEnd-to-end security protects the entire system and preventshackers from tampering with its operation. In combination withDESFire EV1 smart cards and the new generation of card readers,you can rest assured that your security management system issafe and sound from start to finish.
SiriusCard reader solution
Features
• Distinct design
• Fits in any modern environment
• Fast transaction speed
• Several options: Mifare Classic, Mifare DESFire EV1,Rijkspas compatible
• ISO14443A cards
• Synthetic housing with stainless steel look, finished witha hard top layer
• Light guide
Sirius (Orbit)Dimensions (h x w x d) 143 x 45 x 25mm
Operating frequency 13.56MHz
Standard ISO14443A
Data type Read
Cards Read: Mifare 1K, Mifare 4K and Mifare Mini
Power supply Average: 5~12VDC, 95mA; peak: 130mA
Cable distance ABA: 20 metres; Wiegand: 75 metres; RS-485: 150 metres
Interface Wiegand, RS-485, and ABA (clock/data)
LED Indicators 1 red/green LED light guide and 1 buzzer
Reading distance 15mm ~ 70mm for ISO14443A Mifare cards (depending on transponder)
Operating temperature -25°C to +65°C (-13°F to +149°F)
Operating humidity <95% with no condensation
Connection 9-pin removable connector
Protection class IP53, electric epoxy potted for harsh environments
Sirius (Polyx)Dimensions (h x w x d) 143 x 45 x 25mm
Operating frequency 13.56MHz
Standard ISO14443-4
Data type Read/write
Cards Read/write: Mifare 1K, Mifare 4K, Mifare Mini, Plus, Mifare DESFire, MifareDESFire EV1, Rijkspas, ISO14443A
Power supply Average: 5~12VDC 110mA; peak: 130mA
Cable distance 150 metres
Interface RS-485
LED Indicators 2 red/green LEDs and 1 buzzer
Reading distance 15mm ~ 70mm for ISO14443A Mifare cards (depending on transponder)
Operating temperature -25°C to +65°C (-13°F to +149°F)
Operating humidity <95% with no condensation
Connection 9-pin removable connector
Protection class IP53, electric epoxy potted for harsh environments
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsSirius
Description
AlphaTool provides the installer with a user-friendly softwaremanagement tool for programming and controlling theAlphaVision ML and XL Control Panels and DL-600 PSTN andDLM-600 GSM/GPRS dialers both, locally and remotely.
Ease of installationAlphaTool provides options for programming, controlling, anddiagnostics. It is also possible to prepare a programming filebefore installing the product. This reduces installation time andmakes it possible for technicians who are unfamiliar withprogramming to easily configure products.
After selecting the control panel you wish to program, thecorresponding product will be displayed on your computerscreen as visual verification. During operation, audio messageswill assist the user.
Information managementAlphaTool stores client information, programming files, and theunique ID-codes of the wireless PowerCode components in aclient database, so the installer has all the client data in onesimple and easy to use software tool. Modifying or adding datacan be done either locally or remotely. AlphaTool also allowsusers to print client and programming information.
Managing wireless ID-codesAlphaTool displays the unique hexadecimal ID-codes of wirelessPowerCode components. In situations where a wirelessPowerCode component needs to be exchanged or added, theinstaller can simply enter the unique ID-code in the AlphaTooluser interface.
Help for the userAlphaTool contains a help-function with useful information andtips that can assist the user during operation.
Save time and moneyAlphaTool offers the installer an effective solution that will savehim hundreds of euros a year. Since modifications can be carriedout remotely, operators can appropriately prioritize and react tologged reports. This ensures users an efficient and effectivemanagement solution that reduces cost and time requirements.
High customer service levelInstallers can offer customers a higher level of support.AlphaTool allows the installer to efficiently modify or add usercodes, change programming, or add extra key fobs.
Prepared for the futureAlphaTool prepares you for future system expansions and itsupports various new Alphatronics products.
AlphaToolManagement Software
Features
• Multifunctional management software
• Keypad option for local or remote access
• Visual and vocal support during operation
• Backup, control, and maintenance database features
• Quick programming of wireless components
• Programming of new installations in advance
• Can be used for training
• Online help function
• New platform for all future Alphatronics systems
System requirementsSupported operating systems Windows 2000 service pack 4. AlphaTool is compatible with Windows XP and
service pack 2 or Windows 7
Memory Minimum 256MB RAM (for Windows 2000 or Windows XP);512MB RAM for Windows 7
Hard disk space 30MB for AlphaTool, maximum 250Mb for .NET software (necessary addition forWindows)
Modem For remote connection: PSTN modem with COM port connection (or USBmodem with virtual COM port); Hayes compatible commando set, support of2400 baud (V22bis)
Browser Minimal Microsoft Internet Explorer 5.0.1
Ordering informationModels Description
004255 AlphaTool management software package
003834 RS-232 programming cable (2m)
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaTool
Description
AlphaCom XL IP transceiver transmits alarm and statusinformation in a safe and reliable way over IP (AoIP) to amonitoring station.
Installation optionsThe AlphaCom XL IP transceiver is available as a board or as anencased unit with a power supply and battery pack. Both modelsare also available with an integrated GPRS module for a backupconnection in, for example, high-risk facilities (grade 4) orpremises without a wired LAN connection.
Integrated systemThe AlphaCom XL can be connected to any alarm control panelthat is equipped with an analog dialer to reliably transmit alarmmessages over IP (protocols supported: regular SIA, SIA-HS,Contact ID, or Scancom DTMF).
Standalone solutionAlphaCom XL can also work as a standalone solution using the12 analog inputs and four relay outputs. All AlphaCom IPproducts can be programmed and controlled using a standardInternet browser, so no special software is needed.
Total protectionAlphatronics IP products contain hardware and software thatprotect systems from abuse and hacking. The web-based userinterface is protected with an encrypted user name andpassword; the board itself contains a dipswitch to entirely blockthe web browser and isolate itself from the outside world. AllAlphaCom IP products contain embedded software that makesthem 100% immune to viruses.
Monitoring the connectionAll AlphaCom IP products include a unique mechanism to ensurealarms are received by the control room. The IP transceiver waitsfor a confirmation from the receiver equipment in the controlroom before affirming this to the analog dialer.
AlarmsAlphaCom IP also continually monitors its connection with thecontrol room and sends an alarm message to alert operators ofany disruptions. Any control room equipped with an AlphatronicsRC-4001 IP receiver card can receive alarm and statusinformation from the AlphaCom XL IP transceiver. Control roomsequipped with an Enai Systems RX-5000 receiver can receivealarm and status information by using the SecIP protocol.
Reduced costs and guaranteed availabilityAlphaCom XL offers many advantages for the end-user. Itreduces telephone costs for reporting the status and alarms to acontrol room and guarantees availability by monitoring thesystem and alerting operators as soon as something is amiss.
AlphaVision AlphaCom XLIP tranceiver with optional GPRS backup
Features
• Universal IP dialer (grade 4)
• Optional GPRS backup
• Easy to instal and program
• Supports Contact-ID, SIA, SIA-HS, and Scancom
• 12 analog inputs; 4 relay outputs
• Virtual connection with the monitoring station
• Management via a standard Internet browser
• Supports DHCP technology
• Supports Alphatronics Device Discovery Tool
Inputs and outputsInputs 12 inputs; RS-485 connection; 2x RS-232 serial ports; PSTN line interface; LAN
connection
Outputs 4 potential free outputs (NO/NC)
SystemIP address Static or dynamic
Port number Programmable
Indicators 4 LED status indicators
Protocols (in) Contact ID, SIA, SIA-HS, and Scancom DTMF
Protocols (out) SIA-HS data IP / SecIP
Programming Standard web browser
Security Adjustable via dip switch
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalBoard dimensions (h x w x d) 157 x 157 x 18mm
Casing dimensions (h x w x d) 250 x 190 x 70mm
Weight 200g / 275g / 1200g / 1275g
PowerPower supply 12-16VDC / 230VAC
Normal current consumption 135mA (without GPRS) /145mA (with GPRS)
Maximum current consumption 275mA (without GPRS) / 385mA (with GPRS)
Ordering informationModels Description
003630 AlphaVision AlphaCom XL IP board
003631 AlphaVision AlphaCom XL IP + GPRS board
003633 AlphaVision AlphaCom XL IP transceiver with power supply and battery pack in casing
003634 AlphaVision AlphaCom XL IP + GPRS transceiver with power supply and battery pack in casing* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaCom XL
Description
The DL-600 PSTN dialer is a compact all-in-one solution fortransmitting intruder and/or technical alarms via an analognetwork. The DL-600 is multifunctional and freely programmableusing the AlphaTool software.
Flexible installation optionsThe DL-600 PSTN dialer is available as a board, as a board in asynthetic casing, or as a board in a synthetic casing with aswitching power supply and battery pack. The DL-600 can easilybe extended with a plug-on DSP speech board, so technicalalarms and alerts can be reported to private (mobile) telephonenumbers as voice messages.
Automatic alarm notificationIn addition to traditional applications such as an analog alarmdialer for security purposes, the DL-600 is ideal for automaticallyreporting technical alarms to a monitoring station and/or toprivate (mobile) telephone numbers as voice messages or SMStexts. The dialer contains eight analog inputs that can betriggered by a pulse or voltage, which is selectable by means of ajumper setting.
The DL-600 also contains three outputs that can be configured toactivate if a failure occurs, such as a communication failure, lowbattery, power failure, or telephone failure, or if the output isremotely activated by a telephone (via DTMF tones).
Voice message supportThe DL-600 can be expanded with a speech module to transmitalarm messages and notifications as voice messages to private(mobile) telephone numbers. The voice message can be chosenfrom a standard library or recorded using the AlphaTool softwareand your computer’s sound card and microphone.
Alerts via telephoneUp to eight telephone numbers can be programmed forreporting alarms and/or potential problems. For each input, youcan define the telephone number(s) that will be called and thetype of protocol used. This creates a flexible solution to notifythe appropriate authorities the moment incidents arise.
When transmitting to a private (mobile) telephone number, theDL-600 can be configured to sound an alarm tone, send an SMStext, or play a voice message, provided a speech board isinstalled.
ProtocolsThe DL-600 transmits to monitoring stations using the ContactID, SIA Level 2, or XSIA protocol. Each input can be assigned aname and set to send an alarm and/or restore message to themonitoring station.
AlphaVision DL-600 PSTN DialerAnalog transmitterAlphaVision DL-600 PSTN DialerAnalog transmitter
Features
• Freely programmable PSTN (speech) dialer
• Suitable for alarm reporting to monitoring stationsand/or private (mobile) telephone numbers
• 8 analog inputs
• Up to 8 telephone numbers per input
• 3 outputs (possible to activate remotely)
• Option for remote activation and resetting via outputs
• Local and remote programming and control with theAlphaTool software package
Features
• Freely programmable PSTN (speech) dialer
• Suitable for alarm reporting to monitoring stationsand/or private (mobile) telephone numbers
• 8 analog inputs
• Up to 8 telephone numbers per input
• 3 outputs (possible to activate remotely)
• Option for remote activation and resetting via outputs
• Local and remote programming and control with theAlphaTool software package
ProgrammingThe AlphaTool software is used to program the DL-600 locally(RS-232) or remotely using a modem connection and PC/laptop.Programming the DL-600 is easy to do and allows users to editparameters both on the spot and from remote locations.
Technical Specifications
Inputs and outputsInputs 8 potential-free (NO or NC) or voltage controlled
Outputs 3 open collector outputs (1x 100mA, 2x 200mA) for communication failure, powerfailure, low battery, telephone failure, and remote service
IndicatorsStatus LEDs 3
TelephoneTelephone line Analog (PSTN)
Priority circuit Integrated priority circuit for analog (PSTN) line
ProtocolsProtocols Contact ID, SIA level 2, XSIA, alarm tone, SMS text message, and voice messages
(using optional speech board)
SystemProgramming AlphaTool software and laptop/PC
Watchdog Intelligent double circuit and power sense system supervision tool
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalCasing dimensions (h x w x d) 250 x 190 x 70mm
Board dimensions (h x w x d) 160 x 95mm
Weight 112g / 758g / 1178g
PowerPower consumption 60mA at rest; 105mA in alarm (excluding battery pack and activated outputs)
Power supply 12-16VDC (16VDC with battery pack)
www.tkhsecurity.com
DL-600 PSTN Dialer
Ordering informationModels Description
004020 AlphaVision DL-600 PSTN Dialer board
004021 AlphaVision DL-600 PSTN Dialer board in casing
004022 AlphaVision DL-600 PSTN Dialer board with power supply and battery pack in casing
004162 AlphaVision ML speech plug-on board
004255 AlphaVision ML speech plug-on board
003834 RS-232 programming cable (2m)* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsDL-600 PSTN Dialer
Description
More and more applications demand alarm reporting via themobile network. The DLM-600 is a multifunctional GSM/GPRSdialer designed specifically for these applications. The universalDLM-600 dialer is a compact all-in-one solution designed byAlphatronics for transmitting intruder and/or technical alarms viathe GSM or GPRS network. The DLM-600 is multifunctional andfreely programmable using the AlphaTool software.
Reliable alarm reportingThe high availability and stability of a mobile network makesalarm reporting via GSM/GPRS an extremely reliable channel foralarm reporting. Due to the universal setup of the DLM-600, itcan be used for various applications. By connecting the dialerbetween the existing analog telephone line and the fire orintrusion panel, all alarm notifications will be transmitted via GSMto the monitoring station if the PSTN telephone line is tamperedwith or fails to communicate with the central control room.
Integrated or standaloneThe DLM-600 can be connected to an existing PSTN dialer or toan alarm panel containing a PSTN dialer and can function as aprimary or backup dialer. The DLM-600 can also be connected toAlphaVision XL via the RS-485 bus, creating a fully integratedsolution. In situations where there is no analog phone line, theDLM-600 can be used as a GSM interface or as a standalonedialer to transmit messages via the GSM or GPRS network.
Inputs and outputsThe DLM-600 is equipped with four inputs for connectingdetectors or four outputs from external applications. Uponactivation of the inputs, an alarm will be reported to a monitoringstation using and/or to up to eight (mobile) telephone numbersas an SMS text message or voice message (optional).
The DLM-600 also has four outputs which arefreely programmable and can be activated if low voltage, powerfailure, telephone (PSTN) line failure, poor GSM coverage, orGSM failure occurs. The outputs can also be remotely activatedvia DTMF buttons on a (mobile) phone.
Alarm reportsAlarm reporting to a monitoring station via GSM is done throughthe Contact ID, SIA level 2, or XSIA protocols (GSM). Whenreporting via GPRS, the SIA HS IP protocol (GPRS) can beselected. Each input can selectively send reports to up to eighttelephone numbers. The reports can contain information aboutthe zone name (maximum of 16 characters) and the alarm/restorecode. Reporting to private (mobile) telephone numbers ispossible through an alarm tone, SMS text message, or as aspoken voice message by using the plug-on DSP speech board.
Flexible installation optionsThe DLM-600 GSM/GPRS dialer is available as a board, a boardin a synthetic casing, or as a board in a synthetic casing with aswitching power supply and battery pack.
AlphaVision DLM-600 GSM/GPRS DialerMobile network transmitter
Features
• Freely programmable GSM/GPRS (speech) dialer
• Suitable for alarm reporting to monitoring stationsand/or private (mobile) telephone numbers
• Universal solution as converter or backup, primary, orstandalone dialer
• 4 inputs for connecting detectors and/or outputs
• Up to 8 telephone numbers per input
• 4 outputs (possible to activate remotely)
• Local and remote programming and control with theAlphaTool software package
ConfigurationUsing the AlphaTool software, the DLM-600 can easily beprogrammed locally (using a serial connection) or via a modemconnection and a computer or laptop. AlphaTool is a universalsoftware package with a clear structure that greatly simplifiesprogramming. Files can be saved and used as reference formodifications in the future.
Technical Specifications
Inputs and outputsInputs 4 freely programmable (NO/NC) inputs
Outputs 4 freely programmable relay outputs
IndicatorsLED status indicators 3
ProtocolsProtocol GSM Contact ID, SIA level 2, and XSIA
Protocol GPRS SIA HS IP
Protocol private SMS text message, alarm tone or optional voice message
SystemGSM network 900/1800MHz
GSM configuration Subscription including data (not prepaid)
GSM line monitoring Network signaling and monitoring
Programming Programmable via AlphaTool software
Voice messages 4 voice messages via DSP speech board
Telephone numbers 8 telephone numbers (programmable per input)
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalBoard dimensions (h x w x d) 160 x 105mm
Casing dimensions (h x w x d) 250 x 190 x 70mm
Weight 114g/760g/1180g
www.tkhsecurity.com
DLM-600 GSM/GPRS Dialer
PowerPower supply 12-16VDC (16VDC with battery pack)
GSM module current drain - idle(approx.)
130mA
GSM module current drain - in alarm(approx.)
230mA
GPRS module current drain - idle(approx.)
140mA
GPRS module current drain - in alarm(approx.)
220mA
Ordering informationModels Description
004025 AlphaVision DLM-600 GSM/GPRS Dialer
004026 AlphaVision DLM-600 GSM/GPRS Dialer in casing
004027 AlphaVision DLM-600 GSM/GPRS Dialer with power supply and battery pack in casing
004162 AlphaVision ML speech plug-on board
004255 AlphaVision ML speech plug-on board
003834 RS-232 programming cable (2m)* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1 - Subject to modification.
Technical SpecificationsDLM-600 GSM/GPRS Dialer
Description
The AlphaVision Input + 8 OC Expansion Module for theAlphaVision ML and AlphaVision XL Control Panels is designed toexpand the system with eight wired zones and eight opencollector (OC) outputs (two pieces at 200mA and six pieces100mA).
Optional metal casingThe Input + 8 OC Expansion Module is available either as aboard, which can be placed in the metal casing of theAlphaVision ML or XL Control Panels, or in a standalone compactmetal casing.
PowerThe Input + 8 OC Expansion Module gets its power supply fromthe RS-485 bus and has a current drain of 58mA. The input + 8OC module needs at least eight volts. With a voltage drop of twovolts, the maximum distance between the Input + 8 OCExpansion Module and the nearest power supply is about 85meters.
AlphaVision Input + 8 OC Expansion ModuleI/O board
Features
• Easy to instal
• 8 inputs
• 8 open collector (OC) outputs
• Optional compact metal casing
• Supported by AlphaVision ML and XL Control Panels
Inputs and outputsInputs 8
OC outputs 8
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalBoard dimensions (h x w x d) 150 x 73 x 12mm
Casing dimensions (h x w x d) 177 x 155 x 35mm
Weight Board 100gIn casing 1002g
Casing colour White
PowerSupply voltage 12VDC (powered by the panel bus)
Normal current consumption 58mA
Ordering informationModels Description
009831 AlphaVision Input + 8 OC Expansion Module
004314 AlphaVision Input + 8 OC Expansion Module in metal casing
008653 KBAT-4 twisted-pair cable 2 x 2 x 0.5 + A (200m)* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsInput + 8 OC Expansion Module
Description
AlphaVision ML is one of the first control panels available in thesecurity market to offer an integrated IP dialer, providing moreflexibility while reducing costs.
Scalable systemThe AlphaVision ML is equipped by default with 12 wired zones.Adding an RS-485 bus with I/O and input modules can expandthe system to up to 44 zones. The maximum length per RS-485bus is 1200 meters, taking into account current and voltagevariances along the cable. Connecting a wireless receiver makesit possible to integrate wireless detection components and keyfob transmitters into the system.
Alarm functionalityAlarms can be reported immediately to a central control roomusing the integrated IP dialer. In high risk installations, a backuptransmission channel can be used by connecting an optionalGPRS backup dialer. It is also possible to transmit alarms via ananalog (PSTN) or mobile network (GSM) using an optional PSTNor GSM dialer.
Voice message supportAlphaVision ML can be extended with a speech module to reportvoice messages to private (mobile) telephone numbers via PSTNor GSM. Expanding the existing installation with a built-inmicrophone and speaker set (maximum one piece per keypad)allows for either one- or two-way audio communication.
User-friendlyAlphaVision ML can be operated and programmed using the newAlphaVision line of LCD and LCD proximity keypads.Alternatively, users can also program the control panel with a PC/laptop and the AlphaTool software. Local programming ispossible via a LAN or serial cable. Users can also programAlphaVision ML remotely via an IP or modem connection. Userscan arm or disarm AlphaVision ML with a wireless keyfobtransmitter or key switch.
Dutch productAlphaVision ML is a high-tech product developed andmanufactured in the Netherlands. It uses the latest technologyand reflow manufacturing techniques currently available. Fromresidential to commercial properties, AlphaVision ML offers asuitable hybrid or IP solution for every situation.
AlphaVision MLIP security alarm system control panel
Features
• Optimal security for homes, shops, and offices
• Easy to instal; user-friendly
• Up to 44 wired and/or wireless zones
• 4 sections, 8 keypads, 90 user codes
• Integrated IP dialer (for remote service)
• Optional plug-on PSTN or GSM/GPRS dialer
• Options for arming/disarming with proximity tag orwireless keyfob transmitter
• Supports SMS text message functionality
• Audio communication options
• Developed and manufactured in the Netherlands
CameraNumber of zones 12 zones, expandable up to 44 zones; normally open (NO) or normally closed
(NC) circuits with or without end of line resistors; wireless option
Zone type Alarm, sabotage, fire, gas, water, temperature, holdup, social alarm, technicalalarm, key switch, or direct dialer input
Zone characteristics Programmable as EOL and NC, NC, EOL and NO, NO, wireless, not active
PartitionsNumber of partitions Maximum of 4 partitions, with the possibility for total and partial arming
OutputsRelay 2
Open collector (OC) 2 (200mA)
Loudspeaker (LS) 1
DialerIP (integrated) Dialer with 4 telephone numbers for central control room
GPRS (plug-on) Dialer for central control room (backup) reporting
GSM (plug-on) Dialer for central control room and private reporting
PSTN (plug-on) Dialer for reporting to central control room and private (mobile) telephonenumbers
ProtocolsIP SIA-HS data
GPRS SIA-HS data
GSM SIA level 2, XSIA, Contact ID, tone, voice (with optional speech board), SMS textmessage
PSTN SIA level 2, XSIA, Contact ID, tone, voice (with optional speech board), SMS textmessage
Expansion modulesMaximum number of expansionmodules
4
Input modules 8 inputs; 8 open collector outputs (OC)
I/O modules 8 inputs; 6 open collector outputs (OC); 2 relay outputs, including a 12V at 3Apower supply
Wireless Expansion Module 32 inputs for use with wireless detectors and/or wireless transmitters
RS-485 bus 4-wire (twisted-pair) RS-485 bus cable for modules and keypads (maximum buslength 1200m)
KeypadsMaximum number of keypads 8
Options LCD keypad; LCD proximity keypads
Access controlProximity reader 1-piece waterproof proximity reader for arming and disarming
www.tkhsecurity.com
Technical SpecificationsAlphaVision ML
ProgrammingGeneral Freely programmable with a keypad or with a PC/laptop and AlphaTool
Remote access Remotely programmable using a PC/laptop, AlphaTool, and a modem or IPconnection
User management User functions programmable via the keypad
LoggingHistorical log Up to 250 events (via keypad or AlphaTool)
AuthenticationCode levels 8 levels, 1 installer level
User codes 90 (pin code and/or tag)
PowerPower supply 230V, 15 or 16VDC at 1.9A with advanced charging circuit
Normal current consumption 130mA
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) Plastic casing: 238 x 188 x 92mm; steel casing: 400 x 255 x 120mm
Weight 5480g
www.tkhsecurity.com
Technical SpecificationsAlphaVision ML
Ordering informationModels Description
004150 AlphaVision ML AlphaVision ML Control Panel with LCD keypad in plastic casing
004151 AlphaVision ML AlphaVision ML Control Panel with LCD or LCD proximity keypad in plastic casing
004155 AlphaVision ML AlphaVision ML Control Panel with LCD keypad in metal casing
004156 AlphaVision ML AlphaVision ML Control Panel with LCD proximity keypad in metal casing
004120 AlphaVision ML AlphaVision ML LCD keypad
004124 AlphaVision ML AlphaVision ML LCD proximity keypad
004128 Built-in speaker set with microphone for AlphaVision ML keypad
004326 AlphaVision proximity reader
004162 AlphaVision ML AlphaVision ML speech plug-on board
004165 AlphaVision ML AlphaVision ML GSM/GPRS plug-on dialer
004166 AlphaVision ML AlphaVision ML PSTN plug-on dialer
004209 AlphaVision ML AlphaVision ML Wireless Expansion Module
009831 AlphaVision Input + 8 OC board
004314 AlphaVision Input + 8 OC board in metal casing
004312 AlphaVision I/O expansion module in casing and power supply
009863 AlphaVision ML AlphaVision ML replacement motherboard
200076 AlphaVision ML AlphaVision ML replacement power supply 3A / 15V
004255 AlphaTool management software package
003834 RS-232 programming cable (2m)
008653 KBAT-4 twisted-pair cable 2 x 2 x 0.5 + A (200m)* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision ML
Description
Expanding the AlphaVision ML with a speech board allows usersto send voice messages to private (mobile) telephones by PSTNor GSM, for example, to send alarm reports.
Audio communicationThe AlphaVision ML keypad can be equipped with a built-inspeaker set and microphone. It is therefore possible to supportusers during operation from the AlphaVision ML with half-duplexaudio communication. Please note that only one keypad can beequipped with the built-in speakers and microphone.
Voice messagesThe speech board is a plug-on PCB including an SD card thatcontains a large number of standard voice messages, such aszone names, alarm information, failures, etc. If the AlphaVisionML Contol Panel is equipped with a microphone, thencustomized voice messages can be recorded.
AlphaVision ML DSP Speech BoardHalf-duplex audio support
Features
• Easy to instal
• SD card with standard voice messages
• Option for customised voice messages
• Suitable for vocal support with voice prompts
• Suitable for building up a half-duplex connection
• Compatible with the AlphaVision ML Control Panel andthe DL-600 and DLM-600 dialers
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) 55 x 45 x 10mm
Weight 16g
PowerSupply voltage 12VDC
Normal current consumption 40mA
Ordering informationModels Description
004162 AlphaVision ML speech plug-on board
004128 Built-in speaker set with microphone for AlphaVision ML keypad
004165 AlphaVision ML plug-on GSM/GPRS dialer
004166 AlphaVision ML plug-on PSTN dialer* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision ML DSP Speech Board
Description
The AlphaVision ML Control Panel is equipped with an integratedIP dialer for reporting alarms to a central control room.
Extending the control panel with a GSM/GPRS dialer allows usersto send alarm reports to (mobile) phone numbers. This modulecan be mounted directly on the mainboard of the AlphaVisionML Control Panel.
Alarm reports via GSMThrough the GSM/GPRS module, alarms can be reported via theGSM network to a monitoring station (protocols: Contact ID, SIAlevel-2, or XSIA) or to private (mobile) phones (protocols: siren orSMS text or voice message, provided the optional plug-onspeech board is installed).
Please note that the GSM/GPRS module must be equipped witha SIM card. It is strongly advised not to use prepaid cards as themodule cannot detect when the calling credit has expired.
Transmitting information via GPRSIt is also possible to use the GSM/GPRS module to send GPRStransmissions to a monitoring station (protocol: SIA-HS IP). ForGPRS reception, the monitoring station must have an RC-4001receiver equipped with an RC-4001 IP receiver card. The GSM/GPRS module must be equipped with a SIM card for GPRS data(not GSM!).
Backup dialerThe GSM/GPRS module can serve as a GPRS backup dialer forthe integrated IP alarm dialer of the AlphaVision ML ControlPanel. When the AlphaVision ML Control Panel is equipped witha PSTN dialer, the GSM/GPRS module can be used as a backupoption.
AlphaVision ML GSM/GPRS DialerPlug-on board for alarm reporting
Features
• Easy to instal
• GSM dialer for transmitting alarm reports
• GSM backup solution for PSTN dialer
• GPRS backup solution for IP dialer
• Supports tone and SMS text messages
• Optional plug-on speech board for sending audioreports
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) 105 x 45 x 17mm
Weight 49g
PowerSupply voltage 12VDC
Normal current consumption 30mA
Maximum current consumption 300-500mA
Ordering informationModels Description
004165 AlphaVision ML GSM/GPRS Dialer
004162 AlphaVision ML speech plug-on board* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision ML GSM/GPRS Dialer
Description
The AlphaVision ML Wireless Expansion Module is a receiverdesigned to convert the standard wired AlphaVision ML ControlPanel into a reliable and fully supervised hybrid alarm systemwith wireless options. The AlphaVision ML Wireless ExpansionModule has no address setting required and is powered directlyfrom the mainboard.
Expanding zonesThe wireless expansion module expands the system with up to 32wireless zones. Zones 13 to 44 in the AlphaVision ML can beprogrammed as wireless zones. Alarm information and statusinformation, such as low battery, tampering, and supervision, isreported by each individual zone to the control panel.
Extensive device optionsThe AlphaVision ML Wireless Expansion Module is compatiblewith Visonic wireless 868MHz devices. Besides wireless detectors,you can also incorporate up to eight keyfob transmitters orkeypads, enabling you to arm and disarm the AlphaVision MLControl Panel.
InstallationThe AlphaVision ML Control Panel can be expanded with onewireless receiver. The receiver is housed in a small compacthousing, which must be installed outside the metal casing of theAlphaVision ML Control Panel.
AlphaVision ML Wireless Expansion ModuleReceiver for integrating wireless functionality
Features
• Easy to instal
• Compact casing
• Cost-effective expansion module
• Compatible with AlphaVision ML Control Panel
• Supports up to 32 wireless devices
• Provides low battery, tampering, inactivity, and RFjamming output indications
• Supports Visonic PowerCodeTM and CodeSecureTM
868MHz wireless devices
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) 65 x 65 x 28mm
Weight 100g
Casing colour White
PowerOperating frequency 868MHz
Number of wireless zones 32
Supply voltage 12VDC
Normal current consumption 15mA
Ordering informationModels Description
004209 AlphaVision ML Wireless Expansion Module* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision ML Wireless Expansion Module
Description
AlphaVision ML and XL can be operated by the AlphaVision LCDor LCD proximity keypads. Each keypad is recognisable by amodern design and has a clearly readable text on a 2x 16-character LCD screen for displaying system information, systemprogramming, and alarm functions.
The silicon rubber keypad with blue backlight gives the userinformation about eight section LEDs and various system stateindication LEDs. The keypad is available in two versions. The LCDkeypad is operated by means of a PIN code. The LCD keypadwith integrated proximity reader is operated by a proximity tagto easily and quickly arm or disarm the system.
AlphaVision ML/XL LCD Proximity KeypadControl panel operation
Features
• Designer housing
• Keypad and display with blue backlight
• User-friendly
• Buzzer for acoustic signalling
• 2 x 16-character LCD screen
• LEDs for system state indication
• 8 LEDs for partitions state indication
• Supports AlphaVision ML and XL Control Panels
• Available as LCD proximity keypad
PowerSupply voltage 12VDC
Normal current consumption LCD: 90mALCD proximity: 140mA
Maximum current consumption LCD: 90mALCD proximity: 150mA
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) 164 x 124 x 28mm
Weight LCD: 280gLCD proximity: 290g
Colour White
Ordering informationModels Description
004120 AlphaVision ML/XL LCD keypad
004124 AlphaVision ML/XL LCD proximity keypad included with two proximity tags
004128 Built-in speaker set with microphone for AlphaVision ML keypad
008172 AlphaVision proximity tag
008653 KBAT-4 twisted-pair cable 2 x 2 x 0.5 + A (200m)* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsML/XL LCD Proximity Keypad
Description
The AlphaVision ML and XL Control Panels are equipped with anintegrated IP dialer for reporting alarms to a central controlroom. Expanding the control panel with a PSTN dialer allowsusers to send alarm reports to (mobile) phone numbers. If a plug-on speech board is also incorporated into the system, it ispossible to send these reports as voice messages.
The PSTN dialer is a plug-on board and can be mounted directlyto the mainboard of the AlphaVision ML or XL Control Panel. ThePSTN dialer is equipped with a priority circuit that ensures thatthe incoming PSTN line is always available for alarm reporting.
AlphaVision ML/XL PSTN DialerPlug-on board for alarm reporting
Features
• Easy to instal
• PSTN dialer for transmitting alarm reports
• Supports tone and SMS text message reports
• Optional plug-on speech board for sending audioreports
• Supported by AlphaVision ML and XL Control Panels
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) 75 x 50 x 15mm
Weight 47g
PowerSupply voltage 12VDC
Normal current consumption 10mA
Ordering informationModels Description
004166 AlphaVision ML/XL PSTN Dialer
004162 AlphaVision ML speech plug-on board* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision ML/XL PSTN Dialer
Description
The AlphaVision Proximity Reader integrates access control intoan AlphaVision XL installation. Users can control access and armor disarm section(s) by expanding the AlphaVision XL with up to40 external proximity readers on the RS-485 bus.
It is also possible to arm and disarm an AlphaVision MLinstallation using an AlphaVision Proximity Reader.
InstallationThe proximity reader is housed in a robust water-resistant casing,enabling it to be used outdoors. When mounting the AlphaVisionproximity reader on a metal surface or door frame, the use of theRDM-back distance plate is required. Please note that metalsurfaces can negatively affect the performance of the proximityreader.
Output for access controlThe relay output (RO) module is used in combination with theAlphaVision proximity reader to activate an output for accesscontrol purposes. The relay output module is powered by theRS-485 bus and can be used in installations where a separatepower supply is already present for the automatic door openers.
AlphaVision Proximity ReaderAccess control tag reader
Features
• Waterproof casing
• Proximity tag with arm/disarm function
• Control of access function
• Supports 125kHz proximity tags/cards
• Instals directly on a wall or door frame
• Optional barrier plate for metal surface installations
• Supported by AlphaVision ML and XL Control Panels
EnvironmentalOperating temperature -20°C to +50°C (-4°F to +122°F)
MechanicalDimensions (h x w x d) 94 x 43 x 16mm
Weight 140g
Colour Dark brown
PowerSupply voltage 12VDC
Normal current consumption 56mA
Head operating frequency 125kHz
Ordering informationModels Description
004326 AlphaVision Proximity Reader
007913 RDM-back distance plate for AlphaVision Proximity Reader
008172 AlphaVision proximity tag
004337 AlphaVision RO module
008653 KBAT-4 twisted-pair cable 2 x 2 x 0.5 + A (200m)* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision Proximity Reader
Description
The PSTN-2-IP ML is a universally applicable IP transceiver forreporting alarm messages from control panels to monitoringstations over an IP connection. Using the international IPstandard, the PSTN-2-IP ML reliably transmits alarm messages tothe central control station.
Universally applicableThe PSTN-2-IP ML transceiver can be used with any securitycontrol panel with an analog dialer, provided it uses the ContactID, SIA, SIA-HS, or Scancom DTMF protocol. The PSTN-2-IP MLtransceiver is programmed and controlled using a standardInternet browser, such as Internet Explorer.
InstallationThe PSTN-2-IP ML is supplied in a plastic casing and is very easyto instal. The transceiver is placed between a control panel withan analog dialer and a LAN connection. The analog protocolfrom the dialer is transferred to the IP protocol and sent to themonitoring station over the LAN connection using the SIA-HS IPor SecIP protocol.
Status reportsAny monitoring station which is equipped with an AlphatronicsRC-4001 IP receiver card can receive alarm and statusinformation from the PSTN-2-IP ML transceiver. Also, monitoringstations that are equipped with an Enai Systems RX-5000 receivercan receive alarm and status information when using the SecIPprotocol.
Ensured availabilityBy using a unique polling method, the connection with thecontrol station is monitored at all times, alerting the station whenthe connection is disrupted.
Reduced costs and quality controlThe PSTN-2-IP ML offers many advantages for the end-user. Itreduces telephone costs for reporting the status and alarms to acontrol room and guarantees availability by monitoring thesystem and alerting operators as soon as something is amiss.
AlphaVision PSTN-2-IP MLIP-based transceiver
Features
• Universal IP dialer
• Easy to instal and program
• Supports Contact-ID, SIA, SIA-HS, and Scancom
• Unique polling method supplies a virtual connectionwith the monitoring station
• Programming and controlling with a standard Internetbrowser
• Supports DHCP technology
• Supports Alphatronics Device Discovery Tool
• Approved according to EN50136-1 Europeanregulations
SystemInputs PSTN input, RS-485, and LAN connection
IP address Static or dynamic
Port number Adjustable
Indicators LED status indicators
Protocols (in) Contact ID, SIA, SIA-HS, and Scancom DTMF
Protocols (out) SIA-HS data IP/SecIP
Programming Standard web browser
Security Adjustable via dip switch
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) (with casing) 108 x 165 x 38mm
Weight 160g
PowerPower supply 11-15VDC
Normal current consumption 160mA
Maximum current consumption 220mA
Ordering informationModels Description
003611 AlphaVision PSTN-2-IP ML* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision PSTN-2-IP ML
Description
The AlphaVision Relay Output (RO) module is used incombination with the AlphaVision Proximity Reader to activate anoutput for access control purposes in an AlphaVision XLinstallation.
InstallationThe RO module comes in a compact synthetic casing and isdelivered in a small junction box. It is powered directly throughthe RS-485 bus. The RO module can be placed in a generalpower supply casing with backup.
Electronic door opener capabilityThis RO module can be used in existing installations where anelectric door strike is already powered by an external powersupply. Activation time is programmable in steps from two toeight seconds.
AlphaVision Relay Output ModuleOutput for access control
Features
• Compact casing
• Easy to instal
• For access control purposes
• Compatible with the AlphaVision XL Control Panel
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) 65 x 65 x 28mm
Weight 80g
PowerSupply voltage 12VDC
Normal current consumption 5mA
Maximum current consumption 50mA
Ordering informationModels Description
004337 AlphaVision Relay Output Module
004326 AlphaVision XL proximity reader
007913 RDM-back distance plate for AlphaVision XL proximity reader
008172 AlphaVision proximity tag
008653 KBAT-4 twisted-pair cable 2 x 2 x 0.5 + A (200m)* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1 - Subject to modification.
Technical SpecificationsAlphaVision Relay Output Module
Description
AlphaVision XL is one of the first security alarm systems with anintegrated IP dialer, providing more flexibility while reducingcosts.
Easy installationAlphaVision XL has a built-in web server that allows the installerto manage AlphaVision XL from any location via an IPconnection. This makes it possible to make small modificationsand solve problems quickly and efficiently.
Scalable systemAlphaVision XL has a hybrid design, allowing for the use of bothwired and wireless detectors to be used. By connecting wirelessexpansion modules, users can integrate wireless detectors andkey fob transmitters into the system.
Adding communication boards can also expand the system byeither one or four RS-485 buses capable of extending the systemby 120 or 480 zones, respectively. Up to 15 expansion modulescan be connected to each RS-485 bus, making a total of 616zones. The maximum bus length per RS-485 bus is 1200 meters,taking into account current and voltage drops along the cable.
Access controlAlphaVision XL provides access control for up to 40 doors. TheAlphaVision Proximity Reader ensures that unauthorised personsare unable to access doors both inside and outside the building.
Alarm functionalityAlarms can be reported immediately to a monitoring station viathe integrated IP dialer. It is also possible to transmit alarms viathe analog network using an optional PSTN dialer. In high riskinstallations, a backup transmission channel can be used byconnecting an optional GPRS backup dialer.
Intuitive user interfaceThe AlphaVision XL/ML Control Panels are designed with thelatest technology to provide users with effective tools that areeasy to use. The keypads were developed with LCD, LCDproximity, and an exclusive touch screen each including eightsection LEDs. Moreover, it is easy to integrate these new keypadsinto legacy systems is simple and smooth.
Arming and disarming the systemUsers can arm and disarm AlphaVision XL using a key switch, anAlphaVision Proximity Reader, or a wireless keyfob transmitter.
Easy upgradeThe AlphaVision XL mainboard functions with existingAlphaVision NG components, expansion modules, and keypads,so it is easy to upgrade existing AlphaVision systems toAlphaVision XL.
AlphaVision XLIP security alarm system control panel
Features
• Optimal protection for both luxury residential and largecommercial properties
• Easy installation and simple operation
• 16-616 zones wired or wireless
• 32 sections, 40 keypads, 500 user codes
• 1500 codes for access control
• Equipped with integrated IP dialer (remote service)
• Control on access for up to 40 doors
• New line of designer keypads
• Developed and manufactured in the Netherlands
Dutch productAlphaVision ML is a high-tech product developed andmanufactured in the Netherlands. It uses the latest technologyand reflow manufacturing techniques currently available. Fromresidential to commercial properties, AlphaVision ML offers asuitable hybrid or IP solution for every situation.
Technical Specifications
CameraNumber of zones 16 zones; expandable up to 616 zones; NO or NC with or without end-of-line and
AM per input; wireless (via Wireless Expansion Module)
Zone type Burglary, sabotage, fire, hold-up, medical/technical alarm, key switch (per zoneprogrammable as pulse/on-off), direct dialer input
Zone characteristics Programmable as direct, delayed, follower+, 24-hour, semi 24-hour
PartitionsNumber of partitions Maximum 32 sections, group structure above partitions
OutputsRelay 1
Open collector (OC) 4 (200mA)
Loudspeaker (LS) 1
DialerIP dialer 32 integrated IP dialers, programmable per section
PSTN dialer Plug-on PSTN dialer for alarm reporting to monitoring station or via SMS text
GPRS dialer GPRS dialer via RS-485 bus for GPRS alarm reporting (backup)
ProtocolsIP SIA-HS IP
PSTN SIA-HS XT, SIA level 2, XSIA, Contact ID, SMS
Expansion modulesGeneral Maximum 75 expansion modules; 15 pieces connected directly on the control
panel RS-485 bus, others via the AlphaVision XL Communication Board
AlphaVision XL Communication Board Input modules with 8 inputs and 8 open collector outputs;I/O modules with 8 inputs, 2 relay contacts, 6 open collector and 1 LS output,including 12V at 3A power supply;Wireless expansion module for receiving 8 wireless detectors and/or key fobtransmitters
RS-485 bus 4-wire (twisted pair) RS-485 bus for connecting modules and keypad (maximumbus length per bus is 1200m)
www.tkhsecurity.com
AlphaVision XL
KeypadsGeneral Maximum 40 pieces, 15 pieces directly on the control panel‘s RS-485 bus; others
via the AlphaVision XL Communication Board
AlphaVision XL Communication Board Choice of either the AlphaVision XL/ML LCD keypad or the AlphaVision XL/MLLCD proximity keypad
Access controlGeneral Maximum of 40 pieces of water-resistant AlphaVision XL proximity readers
connected to RS-485 bus for access control and arming/disarming; 8 pieces onthe control panel‘s RS-485 bus; others via the AlphaVision XL CommunicationBoard
AlphaVision XL Communication Board 1500 tags for access control only; a time schedule can be assigned perAlphaVision XL proximity reader; an output can also be assigned for a valid/invalid tag; can be linked to one or more sections; programmable if section(s) willalso be disarmed when opening the door
ProgrammingGeneral Fully programmable via the web browser; user options programmable via
keypad; fully programmable with AlphaTool; remotely programmable via IPconnection (web browser and AlphaTool)
LoggingHistorical event log Up to 500 events
AuthenticationCode levels 8 levels, 1 installer level
User codes 500 (pin code and/or tag)
PowerPower supply Switching power supply (230V-15VDC at 3A) with advanced battery charging
circuit
Normal current consumption 150mA
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) of metal cabinet 400 x 255 x 120mm
Weight 5480g
www.tkhsecurity.com
Technical SpecificationsAlphaVision XL
Ordering informationModels Description
004100 AlphaVision XL Control Panel with LCD keypad
004102 AlphaVision XL Control Panel with LCD proximity keypad
004110 AlphaVision XL Communication Board, 1 bus (120 zones)
004114 AlphaVision XL Communication Board, 4 buses (480 zones)
004120 AlphaVision XL LCD keypad
004124 AlphaVision XL LCD proximity keypad
004166 AlphaVision PSTN plug-on dialer
004025 AlphaVision DLM-600 GSM/GPRS plug-on dialer
009831 AlphaVision Input + 8 OC board
004314 AlphaVision Input + 8 OC board in metal casing
004312 AlphaVision I/O expansion module in casing and power supply
004318 AlphaVision XL Wireless Expansion Module
004326 AlphaVision proximity reader
004337 AlphaVision RO module
009863 AlphaVision XL replacement motherboard
200076 AlphaVision XL replacement power supply 3A/15V
004255 AlphaTool management software package
003834 RS-232 programming cable (2m)
008653 KBAT-4 twisted-pair cable 2 x 2 x 0.5 + A (200m)* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision XL
Description
The AlphaVision XL Communication Board is a plug-on board forexpanding the AlphaVision XL Control Panel with an extra RS-485buses. This increases the system with up to 256 zones (1-bus XLCOM).
The AlphaVision XL Communication Board is necessary when anAlphaVision XL installation exceeds 136 zones or when more thaneight AlphaVision XL Keypads and/or eight AlphaVision ProximityReaders are needed. The AlphaVision XL Communication Boardcan also be used to extend the maximum bus length beyond1200 meters.
AlphaVision XL Communication BoardZone and bus extension
Features
• Expands the AlphaVision XL Control Panel with 1-bus
• Extends each individual bus length up to
• 1200 meters
• Adds 120 zones per bus to the AlphaVision XL
• Provides up to 40 keyboards
• Provides up to 40 proximity readers
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalCasing dimensions (h x w x d) 115 x 8,5 x 30mm
Weight 75g
PowerSupply voltage 9-15VDC (via AlphaVision XL Control Panel)
Normal current consumption 20mA at 15VDC*
* This excludes the amount of current provided to equipment connected to each bus.
Ordering informationModels Description
004110 AlphaVision XL plug-on communication board for 1 bus* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision XL Communication Board
Description
The AlphaVision XL Wireless Expansion Module is a receiverdesigned to integrate wireless functionality into the standardwired AlphaVision XL Control Panel.
Extensive device optionsThe AlphaVision XL Wireless Expansion Module is compatiblewith all Visonic PowerCode™ and CodeSecure™ 868MHzdevices – including panic buttons, window/door transmitters, anda variety of detectors. The receiver has eight zones for a total ofeight wireless devices.
Notification applicationsThe receiver is designed for wireless alarm, emergency, and arm/disarm applications.
Alarm information and status information, such as low battery,tampering, and supervision, is reported by each individual zoneto the control panel.
PoweringThe wireless expansion module gets its power supply from theRS-485 bus and has a current drain of 43mA. It is advised toexpand the AlphaVision XL Control Panel with a limited numberof wireless receivers. Contact your local supplier for advice onhow best to implement a solution in a large number of wirelesszones.
AlphaVision XL Wireless Expansion ModuleReceiver for integrating wireless functionality
Features
• Easy to instal
• Compact casing
• Compatible with AlphaVision XL Control Panel
• Supports up to 8 wireless devices per module
• Provides low battery, tampering, inactivity, and RFjamming output indications
• Supports all wireless Visonic PowerCodeTM andCodeSecureTM 868MHz devices
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
MechanicalDimensions (h x w x d) 108 x 165 x 38mm
Weight 240g
Colour White
PowerOperating frequency Visonic 868MHz
Number of wireless zones 8
Supply voltage 12VDC
Normal current consumption 43mA
Ordering informationModels Description
004318 AlphaVision XL Wireless Expansion Module
008653 KBAT-4 twisted-pair cable 2 x 2 x 0.5 + A (200m)* This product is NEN certified (EN 50131) and is currently available for purchase in the Netherlands, Denmark, and Norway. Pleasecontact your local sales representative for inquiries regarding the procurement of this product in other regions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsAlphaVision XL Wireless Expansion Module
Description
The Siqura® XSNet™ C4208SW PoE switch plays a crucial role inthe reliable transport of IP streams and powering edge devices atmax 30W per port. It comprises 8 10/100Base-TX PoE ports andtwo SFP slots. The C4208SW PoE is field-hardened.
Reliable operationThe XSNet™ C4208SW PoE provides exceptional performanceunder severe conditions. For example, performance is nothindered by mechanical stress (vibration and shock) or extremetemperatures. This robust nature provides an ideal solution forcritical infrastructure and traffic applications.
This compact switch offers Rapid Spanning Tree to ensureprompt switchover times and to secure reliable transport ofvideo, audio, and data streams. The XSNet™ C4208SW PoEutilises IGMP for reliable transport of multicast data. Quality ofService is addressed via QoS (IEEE 802.1p) and tagged VLANs(802.1Q), crucial functions for reliable real-time services.
Additionally, the switch includes redundant power inputs with aconfigurable alarm contact to guarantee reliable performance.
ConfigurationThe XSNet™ C4208SW PoE offers 8 independent 10/100Base-TX ports, featuring autonegotiation and auto-MDI/MDIX. Withtwo combo 10/100/1000Base-TX or 1000Base-FX SFP slots, theC4208SW PoE can connect to other network infrastructures.
MountingThis Siqura® XSNet™ switch comes as a DIN rail mountstandalone module.
Power supplyThe XSNet™ C4208SW PoE is powered by an external 48VDCpower supply.
XSNet™ C4208SW PoE8+2-Port Gigabit Ethernet switches with PoE
Features
• Managed 8 + 2-port Ethernet switch
• 8x 10/100Base-TX ports with IEEE 802.3at PoE (30W)(total maximum 180W)
• 2x 1000Base-FX SFP slots
• Field-hardened with PoE
• Non-blocking store-and-forward switching
• Password-protected web interface
• IGMP multicast and Rapid Spanning Tree
• VLAN tagging (802.1Q)
x8
x2
PerformanceAddress table size 8192 addresses
Switching fabric Non-blocking
Switching method Store-and-forward
ElectricalInterface(s) 8x 10/100Base-TX PoE IEEE 802.3at (30W)
Max. total PoE power 180W
Connector type 8x RJ-45
Maximum distance 100m
OpticalInterface(s) 2x 1000Base-FX
Type of interface Empty SFP slot (see XSNet SFP data sheet)
StandardsIEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX
IEEE 802.3x Full-duplex operation
IEEE 802.3z 1000Base-FX
IEEE 802.1p QoS
IEEE 802.1Q Tagged VLAN
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1x Port-based Network Access Control
IEEE 802.3af Power over Ethernet (PoE) (15.4W)
IEEE 802.3at Power over Ethernet (PoE) (30W)
www.tkhsecurity.com
Technical SpecificationsXSNet™ C4208SW PoE
ManagementMulticast IGMP snooping (v1, v2, v3)
Management agent SNMP (RMON, v1, v2c, v3)
LED status indicators
DC Power indication: Power 1, Power 2, Power 3
Per electrical port PoE, Link, activity, speed
Management protocols
Out-of-band Command line interface in RS-232 console, DB9 connector
In-band SNMP (v1, v2c, v3), HTTP (password protected), TFTP
PoweringPower consumption 15W maximum, without PoE
Power connector Redundant terminal block and configurable alarm contact
Input voltage range 47 to 57VDC
EnvironmentalOperating temperature -40°C to +75°C (-40°F to +167°F)
Storage temperature -40°C to +85°C (-40°F to +185°F)
Relative humidity 5% to 95% with no condensation
Safety and EMC IEC/EN 61000; IEC/EN 55022, FCC part 15, UL508
MechanicalDimensions (h x w x d) 165 x 65 x 145mm (6.5 x 2.56 x 5.71in)
Weight 1.0kg (2.2lbs)
Housing DIN rail mounting
Ordering InformationModels Description
XSNet™ C4208SW PoE Managed 8-PoE port field-hardened switch with two 1Gb up-link SFP slots
Power supply External 48VDC; recommended type TBD
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsXSNet™ C4208SW PoE
Description
The Siqura® XSNet™ C4216SW PoE switch plays a crucial role inthe reliable transport of IP streams and powering edge devices atmax 15.4W per port. It comprises 16 10/100Base-TX ports andtwo combo 10/100/1000BaseTX or 1000Base-FX (SM or MM)ports. The C4216SW PoE is field-hardened.
Reliable operationThe XSNet™ C4216SW PoE provides exceptional performanceunder severe conditions. For example, performance is nothindered by mechanical stress (vibration and shock) or extremetemperatures. This robust nature provides an ideal solution forcritical infrastructure and traffic applications.
This compact switch offers Rapid Spanning Tree to ensureprompt switchover times and to secure reliable transport ofvideo, audio, and data streams. The XSNet™ C4216SW PoEutilises IGMP for reliable transport of multicast data. Quality ofService is addressed via QoS (IEEE 802.1p) and tagged VLANs(802.1Q), crucial functions for reliable real-time services.
Additionally, the switch includes redundant power inputs with aconfigurable alarm contact to guarantee reliable performance.
ConfigurationThe XSNet™ C4216SW PoE offers 16 independent 10/100Base-TX ports, featuring autonegotiation and auto-MDI/MDIX. Withtwo combo 10/100/1000Base-TX or 1000Base-FX ports, theXSNet™ C4216SW PoE can connect to other networkinfrastructures.
MountingThis Siqura® XSNet switch comes as a standalone or as a 19"/1 RU module.
Power supplyThe XSNet™ C4216SW PoE is powered by an external 48VDCpower supply.
XSNet™ C4216SW PoE16+2-Port Gigabit Ethernet switches with PoE
Features
• Managed 16 + 2-port Ethernet switch
• 16x 10/100Base-TX ports with IEEE 802.3af (15.4W)Power over Ethernet (PoE)
• 2x combo 10/100/1000Base-TX or 1000BaseFX ports
• Field-hardened with PoE
• Non-blocking store-and-forward switching
• Password-protected web interface
• IGMP multicast and Rapid Spanning Tree
• VLAN tagging (802.1Q)
x8
x2
PerformanceAddress table size 8192 addresses
Switching fabric Non-blocking
Switching method Store-and-forward
ElectricalInterface(s) 16 x 10/100Base-TX PoE IEEE 802.3af (15.4W)
2x 10/100/1000Base-TX
Connector type 16+2x RJ-45
Maximum distance 100m
StandardsIEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX
IEEE 802.3x Full-duplex operation
IEEE 802.3z 1000Base-FX
IEEE 802.1p QoS
IEEE 802.1Q Tagged VLAN
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1x Port-based Network Access Control
IEEE 802.3af Power over Ethernet (PoE) (15.4W)
www.tkhsecurity.com
Technical SpecificationsXSNet™ C4216SW PoE
ManagementMulticast IGMP snooping (v1, v2, v3)
Management agent SNMP (RMON, v1, v2c, v3)
LED status indicators
DC Power indication: Power 1, Power 2
Per electrical port PoE, Link, activity, speed
Management protocols
Out-of-band Command line interface in RS-232 console, DB9 connector
In-band SNMP (v1, v2c, v3), HTTP (password protected), TFTP
PoweringPower consumption 12W maximum, without PoE
Power connector Redundant terminal block with configurable alarm contact
Input voltage range 47 to 55VDC
EnvironmentalOperating temperature -40°C to +75°C (-40°F to +167°F)
Storage temperature -40°C to +85°C (-40°F to +185°F)
Relative humidity 5% to 95% with no condensation
Safety and EMC IEC/EN 61000; IEC/EN 55022, FCC part 15, UL508
MechanicalDimensions (h x w x d) 44 x 442 x 205mm (1.73 x 17.4 x 8.07in)
Weight 3.5kg (7.7lbs)
Housing 19" rack-mount (1 RU)
Optical
XSNet 4216 SW PoEMM
XSNet 4216 SW PoESM
Fiber type 2xMM 2xSM
Output wavelength 1300nm 1310nm
Link length 2km 20km
Ethernet 1000Mb 1000Mb
Connector type Dual SC Dual SC
Ordering InformationModels Description Fiber type
XSNet™ C4216SW PoE MM Managed switch with 16 PoE 10/100Base-TX ports and two combination backboneports, multimode 2xMM
XSNet™ C4216SW PoE SM Managed switch with 16 PoE 10/100Base-TX ports and two combination backboneports, single-mode 2xSM
Power supply External 48VDC; recommended type TBD
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsXSNet™ C4216SW PoE
Description
The Siqura® XSNet™ S4124SW and XSNet™ S4124SW SFPswitches play a crucial role in the reliable transport of IP streams.The XSNet™ S4124SW has 24 10/100Base-TX ports. TheXSNet™ S4124SW SFP model has 24 100Base-FX SFP slots. Bothmodels have four combination backbone ports.
Reliable operationThe XSNet™ S4124SW and XSNet™ S4124SW SFP switchesprovide exceptional performance under industrial conditions.This switch line offers Rapid Spanning Tree to ensure promptswitchover times and to secure reliable transport of video, audio,and data streams. The XSNet™ S4124SW and XSNet™ S4124SWSFP utilise IGMP for reliable transport of multicast data. Qualityof Service is addressed via QoS (IEEE 802.1p) and tagged VLANs(802.1Q), crucial functions for reliable real-time services.
ConfigurationThe XSNet™ S4124SW offers 24 independent 10/100Base-TXports, featuring autonegotiation and auto-MDI/MDIX.
The XSNet™ S4124SW SFP model offers 24 independent100Base-FX SFP slots designed to interconnect with Siqura'srange of cameras with either built-in SFP or Ethernet-over-Coaxfunctionality.
Both models provide four combo backbone ports(10/100/1000Base-TX in parallel with 1000Base-FX SFP).
Configuration and management are straightforward with thebuilt-in web interface and SNMP agent.
MountingThese Siqura® switches come as standalone or 19-inch 1 RU rack–mount modules.
XSNet™ S4124SW and XSNet™ S4124SW SFP24+4-Port Gigabit Ethernet Switches
Features
• Managed 24 + 4-port Ethernet switch
• 24 x 10/100Base-TX ports or 100Base-FX SFP slots
• 4x combo 10/100/1000Base-TX or 1000Base-FX SFPslots
• Non-blocking store-and-forward switching
• Password-protected web interface
• IGMP multicast and Rapid Spanning Tree
• VLAN tagging (802.1Q)
x24
x4
x4
PerformanceAddress table size 8192 addresses
Switching fabric Non-blocking
Switching method Store-and-forward
ElectricalInterface(s) XSNet S4124SW: 24x 10/100Base-TX + 4x 10/100/1000Base-TX
XSNet S4124SW SFP: 24x 100Base-FX SFP + 4x 10/100/1000Base-TX
Connector type XSNet S4124SW: 24 + 4x RJ-45XSNet S4124SW SFP: 4x RJ-45
Maximum distance 100m
OpticalInterface(s) XSNet S4124SW: 4x 1000Base-FX
XSNet S4124SW SFP: 24x 100Base-FX + 4x 1000Base-FX
Type of interface Empty SFP slot (see XSNet SFP data sheet)
StandardsIEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX
IEEE 802.3x Full-duplex operation
IEEE 802.3z 1000Base-FX
IEEE 802.1p QoS
IEEE 802.1Q Tagged VLAN
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1x Port-based Network Access Control
www.tkhsecurity.com
Technical SpecificationsXSNet™ S4124SW and XSNet™ S4124SW SFP
ManagementMulticast IGMP snooping (v1, v2, v3)
Management agent SNMP (RMON, v1, v2c, v3)
LED status indicators
Power Power indication
Per electrical port Link/activity
Per SFP Port Link/activity
Management protocols
Out-of-band Command line interface in RS-232 console, DB9 connector
In-band SNMP (v1, v2c, v3), HTTP (password protected), TFTP
PoweringPower consumption 42.7W maximum
Power source 90-264VAC, 50-60Hz
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Storage temperature -40°C to +85°C (-40°F to +185°F)
Relative humidity 5% to 95% with no condensation
Safety and EMC EM 50121-4 railway, IEC/EN 60950-1, IEC/EN 61000; IEC/EN 55022, FCC part 15
MechanicalDimensions (h x w x d) 44.2 x 442 x 250mm (1.74 x 17.4 x 9.8in)
Weight 6.2kg (13.7lbs)
Housing 19" rack-mount unit
Ordering informationModels Description
XSNet™ S4124SW Managed switch with 24 10/100Base-TX ports and four combination backbone ports
XSNet™ S4124SW SFP Managed switch with 24 100Base-FX SFP slots and four combination backbone ports
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsXSNet™ S4124SW and XSNet™ S4124SW SFP
Description
The compact XSNet™ 4000 SW series are versatile 5-port FastEthernet switches for indoor and outdoor applications. Theswitch offers four independent 10/100Base-TX ports, featuringautonegotiation, autosensing and auto-MDI/MDIX, as well as one100Base-FX port. Easily extend existing LANs with these switchesusing either one single-mode or two multi-mode or single-modefibers.
Reliable operationThe XSNet™ 4000 SW provides exceptional performance undersevere conditions. For example, performance is not hindered bymechanical stress (vibration and shock). This robust natureprovides an ideal solution for critical infrastructure and trafficapplications.
For applications such as IP communication along motorways, orin subways, airports, and tunnels, the XSNet™ 4000 SW seriesoffers a range of solutions. The wide operating temperaturerange guarantees reliable transport even in many outdoorapplications.
As part of Siqura’s Advanced IP Video Network solutions, theXSNet™ switch series plays a crucial role in the reliable transportof IP streams. It relies on both proven interoperability betweenthe various Advanced IP Video Network elements and on provencompatibility with third-party network equipment (e.g., Cisco andHP).
MountingThese Siqura® XSNet™ switches come as DIN rail mountstandalone modules.
XSNet™ 4000SW5-port Fast Ethernet switch
Features
• Unmanaged 4 + 1-port Fast Ethernet switch
• Industrial temperature range
• 4 x 10/100Base-TX ports (IEEE802.3u)
• 1 x 100Base-FX single or 2-fiber port
• N-way autonegotiation
• Autonegotiation and Auto-MDI/MDIX crossover
• Non-blocking store-and-forward switching
• Wide supply voltage range
4+1
PerformanceAddress table size 2048 MAC addresses
Switching method Store-and-forward
ElectricalInterface(s) 4 x 10/100Base-TX
Auto MDI, MDIX autonegotiation
Connector type 4x RJ-45
Maximum distance 100m
StandardsIEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX100Base-FX
IEEE 802.3x Full-duplex operation
PoweringPower consumption 4.3W at 72VAC
Input voltage range 12-48VDC
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Tested at -20°C to +70°C (-4°F to +158°F)
Storage temperature -25°C to +85°C (-13°F to +185°F)
Relative humidity <95% with no condensation
Safety and EMC UL 60950, IEC/EN 61000, EN 50130-4, EN 50081-1, EN 55022, FCC part 15,IEC/EN 61000 (6-4, -32-2, 3-3)
MechanicalDimensions (h x w x d) 100 x 26 x 70mm (4.33 x 3.02 x 2.76in)
Weight 490g (17.28oz)
Housing DIN rail mounting
www.tkhsecurity.com
Technical SpecificationsXSNet™ 4000SW
Optical XSNet 4010 SW XSNet 4040 SW XSNet 4050 SWA/SWB
Fiber type 2xMM 2xSM 1xSM
Output wavelength 1300nm 1310nm 1310nm/1550nm
Link length 2km 40km 40km
Ethernet 100Mb 100Mb 100Mb
Connector type Dual SC Dual SC SC
Ordering informationModels Description Fiber type
XSNet™ 4010SW 4 + 1-port Fast Ethernet switch 2xMM
XSNet™ 4040SW 4 + 1-port Fast Ethernet switch 2xSM
XSNet™ 4050SWA 4 + 1-port Fast Ethernet switch (TX = 1310, RX = 1550) 1xSM
XSNet™ 4050SWB 4 + 1-port Fast Ethernet switch (TX = 1550, RX = 1310) 1xSM
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsXSNet™ 4000SW
Description
The Siqura® XSNet™ C4104SW switch plays a crucial role in thereliable transport of IP streams. It comprises 4 10/100Base-TXports and two SFP slots. The C4104SW is field-hardened.
Reliable operationThe XSNet™ C4104SW provides exceptional performance undersevere conditions. For example, performance is not hindered bymechanical stress (vibration and shock) or extreme temperatures.This robust nature provides an ideal solution for criticalinfrastructure and traffic applications.
This compact switch offers Rapid Spanning Tree to ensureprompt switchover times and to secure reliable transport ofvideo, audio, and data streams. The XSNet™ C4104SW utilisesIGMP for reliable transport of multicast data. Quality of Service isaddressed via QoS (IEEE 802.1p) and tagged VLANs (802.1Q),crucial functions for reliable real-time services.
Additionally, the switch includes redundant power inputs with aconfigurable alarm contact to guarantee reliable performance.
ConfigurationThe XSNet™ C4104SW switch offers 4 independent 10/100Base-TX ports, featuring autonegotiation and auto-MDI/MDIX. Withtwo pluggable 100Base-FX SFP slots, this switch can connect toany network infrastructure. Configuration and management arestraightforward with the built-in web interface and SNMP agent.
MountingThis Siqura® XSNet™ switch comes as a DIN rail mountstandalone module.
XSNet™ C4104SW4 +2-Port field-hardened Fast Ethernet switch
Features
• Managed 4 + 2-port Ethernet switch
• 4 x 10/100Base-TX and 2x 100Base-FX SFP slots
• Field-hardened version available
• Non-blocking store-and-forward switching
• Password-protected web interface
• IGMP multicast and Rapid Spanning Tree
• VLAN tagging (802.1Q)
x4
x2
PerformanceAddress table size 8192 addresses
Switching fabric Non-blocking
Switching method Store-and-forward
ElectricalInterface(s) 4x 10/100Base-TX
Connector type 4x RJ-45
Maximum distance 100m
OpticalInterface(s) 2x 100Base-FX
Type of interface Empty SFP slot (see XSNet SFP data sheet)
StandardsIEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3x Full-duplex operation
IEEE 802.1p QoS
IEEE 802.1Q Tagged VLAN
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1x Port-based Network Access Control
www.tkhsecurity.com
Technical SpecificationsXSNet™ C4104SW
ManagementMulticast IGMP snooping (v1, v2, v3)
Management agent SNMP (RMON, v1, v2c, v3)
LED status indicators
DC Power indication: power 1, power 2, power 3
Per electrical port Link, activity, speed
Management protocols
Out-of-band Command line interface in RS-232 console, DB9 connector
In-band SNMP (v1, v2c, v3), HTTP (password protected), TFTP
PoweringPower consumption 11W maximum
Power connector Redundant terminal block with configurable alarm contact
Input voltage range 12 to 48VDC
EnvironmentalOperating temperature -40°C to +75°C (-40°F to +167°F)
Storage temperature -40°C to +85°C (-40°F to +185°F)
Relative humidity 5% to 95% with no condensation
Safety and EMC NEMA TS2 traffic control equipment, EM 50121-4 railway, UL 508, IEC/EN61000; IEC/EN 55022, FCC part 15
MechanicalDimensions (h x w x d) 145 x 60 x 125mm (5.7 x 2.4 x 4.9in)
Weight 1.1kg (2.42lbs)
Housing DIN rail mounting
Ordering informationModels Description
XSNet™ C4104SW Managed 4-port field-hardened switch with two 100Mb up-link SFP slots
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.3 - Subject to modification.
Technical SpecificationsXSNet™ C4104SW
Description
The Siqura® XSNet™ S4104SW switch plays a crucial role in thereliable transport of IP streams. It comprises 4 10/100Base-TXports and two SFP slots.
Reliable operationThe XSNet™ S4104SW provides exceptional performance undersevere conditions. For example, performance is not hindered bymechanical stress (vibration and shock). This robust natureprovides an ideal solution for critical infrastructure and trafficapplications.
This compact switch offers Rapid Spanning Tree to ensureprompt switchover times and to secure reliable transport ofvideo, audio, and data streams. The XSNet™ S4104SW utilisesIGMP for reliable transport of multicast data. Quality of Service isaddressed via QoS (IEEE 802.1p) and tagged VLANs (802.1Q),crucial functions for reliable real-time services.
Additionally, the switch includes redundant power inputs with aconfigurable alarm contact to guarantee reliable performance.
ConfigurationThe XSNet™ S4104SW switch offers 4 independent 10/100Base-TX ports, featuring autonegotiation and auto-MDI/MDIX. Withtwo pluggable 100Base-FX SFP slots, this switch can connect toany network infrastructure. Configuration and management arestraightforward with the built-in web interface and SNMP agent.
MountingThis Siqura® XSNet™ switch comes as a DIN rail mountstandalone module.
XSNet™ S4104SW4 +2-Port Fast Ethernet switch
Features
• Managed 4 + 2-port Ethernet switch
• 4 x 10/100Base-TX and 2x 100Base-FX SFP slots
• Non-blocking store-and-forward switching
• Password-protected web interface
• IGMP multicast and Rapid Spanning Tree
• VLAN tagging (802.1Q)
x4
x2
PerformanceAddress table size 8192 addresses
Switching fabric Non-blocking
Switching method Store-and-forward
ElectricalInterface(s) 4x 10/100Base-TX
Connector type 4x RJ-45
Maximum distance 100m
OpticalInterface(s) 2x 100Base-FX
Type of interface Empty SFP slot (see XSNet SFP data sheet)
StandardsIEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX/100Base-FX
IEEE 802.3x Full-duplex operation
IEEE 802.1p QoS
IEEE 802.1Q Tagged VLAN
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1x Port-based Network Access Control
www.tkhsecurity.com
Technical SpecificationsXSNet™ S4104SW
ManagementMulticast IGMP snooping (v1, v2, v3)
Management agent SNMP (RMON, v1, v2c, v3)
LED status indicators
DC Power indication: power 1, power 2, power 3
Per electrical port Link, activity, speed
Management protocols
Out-of-band Command line interface in RS-232 console, DB9 connector
In-band SNMP (v1, v2c, v3), HTTP (password protected), TFTP
PoweringPower consumption 11W maximum
Power connector Redundant terminal block with configurable alarm contact
Input voltage range 12 to 48VDC
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Storage temperature -40°C to +85°C (-40°F to +185°F)
Relative humidity 5% to 95% with no condensation
Safety and EMC IEC/EN 61000; IEC/EN 55022, FCC part 15
MechanicalDimensions (h x w x d) 145 x 60 x 125mm (5.7 x 2.4 x 4.9in)
Weight 1.1kg (2.42lbs)
Housing DIN rail mounting
Ordering informationModels Description
XSNet™ S4104SW Managed 4-port switch with two 100Mb up-link SFP slots
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.3 - Subject to modification.
Technical SpecificationsXSNet™ S4104SW
Description
The Siqura® XSNet™ C4108SW switch plays a crucial role in thereliable transport of IP streams. It comprises 8 10/100Base-TXports and two SFP slots. The C4108SW is field-hardened.
Reliable operationThe XSNet™ C4108SW provides exceptional performance undersevere conditions. For example, performance is not hindered bymechanical stress (vibration and shock) or extreme temperatures.This robust nature provides an ideal solution for criticalinfrastructure and traffic applications.
This compact switch offers Rapid Spanning Tree to ensureprompt switchover times and to secure reliable transport ofvideo, audio, and data streams. The XSNet™ C4108SW utilisesIGMP for reliable transport of multicast data. Quality of Service isaddressed via QoS (IEEE 802.1p) and tagged VLANs (802.1Q),crucial functions for reliable real-time services.
Additionally, the switch includes redundant power inputs with aconfigurable alarm contact to guarantee reliable performance.
ConfigurationThe XSNet™ C4108SW switch offers 8 independent 10/100Base-TX ports, featuring autonegotiation and auto-MDI/MDIX. Withtwo pluggable 1000Base-FX SFP slots, this switch can connect toany network infrastructure. Configuration and management arestraightforward with the built-in web interface and SNMP agent.
MountingThis Siqura® XSNet™ switch comes as a DIN rail mountstandalone module.
XSNet™ C4108SW8+2-Port field-hardened Gigabit Ethernet switch
Features
• Managed 8 + 2-port Ethernet switch
• 8 x 10/100Base-TX and 2x 1000Base-FX SFP slots
• Field-hardened version available
• Non-blocking store-and-forward switching
• Password-protected web interface
• IGMP multicast and Rapid Spanning Tree
• VLAN tagging (802.1Q)
x8
x2
PerformanceAddress table size 8192 addresses
Switching fabric Non-blocking
Switching method Store-and-forward
ElectricalInterface(s) 8x 10/100Base-TX
Connector type 8x RJ-45
Maximum distance 100m
OpticalInterface(s) 2x 1000Base-FX
Type of interface Empty SFP slot (see XSNet SFP data sheet)
StandardsIEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX
IEEE 802.3x Full-duplex operation
IEEE 802.3z 1000Base-FX
IEEE 802.1p QoS
IEEE 802.1Q Tagged VLAN
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1x Port-based Network Access Control
www.tkhsecurity.com
Technical SpecificationsXSNet™ C4108SW
ManagementMulticast IGMP snooping (v1, v2, v3)
Management agent SNMP (RMON, v1, v2c, v3)
LED status indicators
DC Power indication: power 1, power 2, power 3
Per electrical port Link, activity, speed
Management protocols
Out-of-band Command line interface in RS-232 console, DB9 connector
In-band SNMP (v1, v2c, v3), HTTP (password protected), TFTP
PoweringPower consumption 11W maximum
Power connector Redundant terminal block with configurable alarm contact
Input voltage range 12 to 48VDC
EnvironmentalOperating temperature -40°C to +75°C (-40°F to +167°F)
Storage temperature -40°C to +85°C (-40°F to +185°F)
Relative humidity 5% to 95% with no condensation
Safety and EMC NEMA TS2 traffic control equipment, EM 50121-4 railway, UL 508, IEC/EN61000; IEC/EN 55022, FCC part 15
MechanicalDimensions (h x w x d) 145 x 60 x 125mm (5.7 x 2.4 x 4.9in)
Weight 1.1kg (2.42lbs)
Housing DIN rail mounting
Ordering informationModels Description
XSNet™ C4108SW Managed 8-port field-hardened switch with two 1Gb up-link SFP slots
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsXSNet™ C4108SW
Description
The Siqura® XSNet™ S4108SW switch plays a crucial role in thereliable transport of IP streams. It comprises 8 10/100Base-TXports and two SFP slots.
Reliable operationThe XSNet™ S4108SW provides exceptional performance undersevere conditions. For example, performance is not hindered bymechanical stress (vibration and shock). This robust natureprovides an ideal solution for critical infrastructure and trafficapplications.
This compact switch offers Rapid Spanning Tree to ensureprompt switchover times and to secure reliable transport ofvideo, audio, and data streams. The XSNet™ S4108SW utilisesIGMP for reliable transport of multicast data. Quality of Service isaddressed via QoS (IEEE 802.1p) and tagged VLANs (802.1Q),crucial functions for reliable real-time services.
Additionally, the switch includes redundant power inputs with aconfigurable alarm contact to guarantee reliable performance.
ConfigurationThe XSNet™ S4108SW switch offers 8 independent 10/100Base-TX ports, featuring autonegotiation and auto-MDI/MDIX. Withtwo pluggable 1000Base-FX SFP slots, this switch can connect toany network infrastructure. Configuration and management arestraightforward with the built-in web interface and SNMP agent.
MountingThis Siqura® XSNet™ switch comes as a DIN rail mountstandalone module.
XSNet™ S4108SW8+2-Port Gigabit Ethernet switch
Features
• Managed 8 + 2-port Ethernet switch
• 8 x 10/100Base-TX and 2x 1000Base-FX SFP slots
• Non-blocking store-and-forward switching
• Password-protected web interface
• IGMP multicast and Rapid Spanning Tree
• VLAN tagging (802.1Q)
x8
x2
PerformanceAddress table size 8192 addresses
Switching fabric Non-blocking
Switching method Store-and-forward
ElectricalInterface(s) 8x 10/100Base-TX
Connector type 8x RJ-45
Maximum distance 100m
OpticalInterface(s) 2x 1000Base-FX
Type of interface Empty SFP slot (see XSNet SFP data sheet)
StandardsIEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX
IEEE 802.3x Full-duplex operation
IEEE 802.3z 1000Base-FX
IEEE 802.1p QoS
IEEE 802.1Q Tagged VLAN
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1x Port-based Network Access Control
www.tkhsecurity.com
Technical SpecificationsXSNet™ S4108SW
ManagementMulticast IGMP snooping (v1, v2, v3)
Management agent SNMP (RMON, v1, v2c, v3)
LED status indicators
DC Power indication: power 1, power 2, power 3
Per electrical port Link, activity, speed
Management protocols
Out-of-band Command line interface in RS-232 console, DB9 connector
In-band SNMP (v1, v2c, v3), HTTP (password protected), TFTP
PoweringPower consumption 11W maximum
Power connector Redundant terminal block with configurable alarm contact
Input voltage range 12 to 48VDC
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Storage temperature -40°C to +85°C (-40°F to +185°F)
Relative humidity 5% to 95% with no condensation
Safety and EMC IEC/EN 61000; IEC/EN 55022, FCC part 15
MechanicalDimensions (h x w x d) 145 x 60 x 125mm (5.7 x 2.4 x 4.9in)
Weight 1.1kg (2.42lbs)
Housing DIN rail mounting
Ordering informationModels Description
XSNet™ S4108SW Managed 8-port switch with two 1Gb up-link SFP slots
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsXSNet™ S4108SW
Description
The versatile XSNet™ 3100MC media converter series offerscost-effective solutions for optical LAN and WAN networks.XSNet™ 3100MC modules are plug-and-play for easyinstallation, featuring autonegotiation and auto-MDI/ MDIXdetection.
The XSNet™ 3100MC offers fully operational 10 or 100Mb/sconnections over fiber in accordance with IEEE 802requirements.
The XSNet™ 3100MC series offers the possibility to select half-duplex or full-duplex mode over the optical FX port. In full-duplex mode the system can span up to 20km (12.4 miles) oversingle-mode fiber.
The XSNet™ 3100MC can be powered by a universal AC/DCadapter provided with each model.
XSNet™ 3100MC10/100Base-TX to FX media converter
Features
• 10/100Base-TX to FX media converter
• 1- or 2-fiber single-mode, or 2-fiber multi-mode
• In accordance with IEEE 802.3 and IEEE 802.3u
• Store-and-forward at full speed
• 758k buffer
• MDI/MDIX auto select
• Adjustment-free installation and operation
• Universal AC/DC adapter
x1
ElectricalInterface(s) 10/100Base-TX, autonegotiation, autosensing, auto-MDI/MDIX
Connector type RJ-45
Cable type Twisted pair (cat 5 or better)
Maximum distance 100m
StandardsIEEE 802.3 100Base-T specification
IEEE 802.3u 100Base-TX and 100Base-FX specification
IEEE 802.3x 802.3x full-duplex operation
Status LEDsLED status indicators
PWR Steady on: power on
LNK/ACT Left = FX LED; right = TX LEDSteady = valid connection; blink = activity; off = no connection
FDX/COL Left LED = FX port; right = TX portSteady = full-duplex; blink = collision; off = half-duplex
100 Steady: speed = 100Mb/sOff: speed = 10Mb/s
EnvironmentalOperating temperature 0°C to +45°C (+32°F to +113°F)
Storage temperature -10°C to +70°C (+14°F to +158°F)
Relative humidity <95% with no condensation
PoweringUniversal AC/DC adapter (included) +12VDC, 0.16A
MechanicalDimensions (h x w x d) 23.8 x 80.3 x 109.2mm (0.94 x 3.16 x 4.3in)
Weight 150g (5.29oz)
Housing Standalone
www.tkhsecurity.com
Technical SpecificationsXSNet™ 3100MC
Optical XSNet 3110 MC XSNet 3140 MC XSNet 3150 MCA XSNet 3150 MCB
Fiber type 2xMM (62.5) 2xSM (09) 1xSM (09) 1xSM (09)
Interface(s) 100Base-FX full-duplexor half-duplex selectable
100Base-FX full-duplexor half-duplex selectable
100Base-FX full-duplexor half-duplex selectable
100Base-FX full-duplexor half-duplex selectable
TX/RX wavelength 1300nm 1310nm 1310nm/1550nm 1550nm/1310nm
Link length 2km 20km 20km 20km
Connector type Dual SC Dual SC SC SC
Ordering informationModels Description Fiber type
XSNet™ 3110MC 10/100Base-TX to 100Base-FX media converter 2xMM
XSNet™ 3140MC 10/100Base-TX to 100Base-FX media converter 2xSM
XSNet™ 3150MCA 1-fiber 10/100Base-TX to 100Base-FX media converter(TX = 1310nm; RX = 1550nm) 1xSM
XSNet™ 3150MCB 1-fiber 10/100Base-TX to 100Base-FX media converter(TX = 1550nm; RX = 1310nm) 1xSM
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsXSNet™ 3100MC
Description
The versatile XSNet™ 3200MC PoE media converter series offerscost-effective solutions for optical LAN and WAN networks.XSNet™ 3200MC PoE modules are plug-and-play for easyinstallation, featuring autonegotiation and auto-MDI/MDI-Xdetection.
The XSNet™ 3200MC PoE offers fully operational 10 or 100Mb/sconnections over fiber in accordance with IEEE 802requirements. It also complies with the IEEE 802.3af PoEstandard to offer 15.4W for powering PoE/PD devices such as IPcameras.
The XSNet™ 3200MC PoE series offers the possibility to selecthalf-duplex or full-duplex mode over the optical FX port. In full-duplex mode the system can span up to 20km (12.4 miles) oversingle-mode fiber.
XSNet™ 3200MC PoE10/100Base-TX to FX media converter with Power over Ethernet
Features
• 10/100Base-TX to FX media converter
• In accordance with IEEE 802.3af PoE (15.4W)
• 1- or 2-fiber single-mode, or 2-fiber multi-mode
• Store-and-forward at full speed
• 2.25Mb buffer
• MDI/MDIX auto select
• Adjustment-free installation and operation
x1
ElectricalInterface(s) 10/100Base-TX, autonegotiation, autosensing, auto-MDI/MDIX
Connector type RJ-45
Cable type Twisted pair (cat 5 or better)
Maximum distance 100m
Power over Ethernet (PoE) Delivers 15.4W
StandardsIEEE 802.3 100Base-T specification
IEEE 802.3u 100Base-TX and 100Base-FX specification
IEEE 802.3x 802.3x full-duplex operation
IEEE 802.3af Power over Ethernet (PoE)
ManagementLED status indicators
PWR 1 or PWR 2 Power on indication
PoE On: powered devices detected
LNK/ACT (TX) Green: link operational; blink: port activity
LNK/ACT (FX) Green: link operational; blink: port activity
EnvironmentalOperating temperature -10°C to +60°C (+14°F to +140°F)
Storage temperature -40°C to +85°C (-40°F to +185°F)
Relative humidity <95% with no condensation
PoweringExternal AC/DC adapter +48VDC/0.075A (3.6W) excl. PoE
+48VDC/0.4A (19.2W) incl. PoE
MechanicalDimensions (h x w x d) 30 x 70 x 110mm (1.18 x 2.76 x 4.33in)
Weight 250g (8.8oz)
Housing Standalone
www.tkhsecurity.com
Technical SpecificationsXSNet™ 3200MC PoE
Optical
XSNet 3210MC/PoE
XSNet 3240MC/PoE
XSNet 3250MCA/PoE
XSNet 3250MCB/PoE
Fiber type 2xMM (50/62.5) 2xSM (09) 1xSM (09) 1xSM (09)
Interface(s) 100Base-FX full-duplexor half-duplex selectable
100Base-FX full-duplexor half-duplex selectable
100Base-FX full-duplexor half-duplex selectable
100Base-FX full-duplexor half-duplex selectable
Output wavelength 1300nm 1310nm 1310nm/1550nm 1550nm/1310nm
Link length 2km 20km 20km 20km
Connector type Dual SC Dual SC SC SC
Ordering informationModels Description Fiber type
XSNet™ 3210MC PoE 10/100Base-TX to 100Base-FX media converter with PoE 2xMM
XSNet™ 3240MC PoE 10/100Base-TX to 100Base-FX media converter with PoE 2xSM
XSNet™ 3250MCA PoE 1-fiber 10/100Base-TX to 100Base-FX media converter with PoE(TX = 1310nm; RX = 1550nm) 1xSM
XSNet™ 3250MCB PoE 1-fiber 10/100Base-TX to 100Base-FX media converter with PoE(TX = 1550nm; RX = 1310nm) 1xSM
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsXSNet™ 3200MC PoE
Description
The versatile XSNet™ 3300MC media converter series offerscost-effective solutions for optical LAN and WAN networks.XSNet™ 3300MC modules are plug-and-play for easyinstallation, featuring autonegotiation and auto-MDI/ MDIXdetection.
The XSNet™ 3300MC offers an SFP for every fiber type byapplying the appropriate SFP for 100 or 1000 Mb/s connectionsover fiber in accordance with IEEE 802 requirements, or by usingthe Siqura® ECO-Plug for 100 Mb/s connections over coax cable.
The XSNet™ 3300MC series offers the possibility to select half-duplex or full-duplex mode and 100 Mb/s or 1000 MB/s over theoptical FX port.
The XSNet™ 3300MC can be powered by a universal AC/DCadapter provided with each model.
XSNet™ 3300MC SFP10/100Base-TX to FX SFP Media Converter
Features
• 10/100/1000Base-TX to FX media converter
• SFP fiber interface supports 100/1000 fiber transmission
• In accordance with IEEE 802.3 and IEEE 802.3u
• Store-and-forward at full speed
• MDI/MDIX auto select
• Adjustment-free installation and operation
x1
ElectricalInterface(s) 10/100Base-TX, autonegotiation, autosensing, auto-MDI/MDIX
Connector type RJ-45
Cable type Twisted pair (cat 5 or better)
Maximum distance 100m
StandardsIEEE 802.3 10Base-T specification
IEEE 802.3u 100Base-TX and 100Base-FX specification
IEEE 802.3ab 1000Base-T specification
IEEE 802.3x 802.3x full-duplex operation
ManagementLED status indicators
PWR Power-on indicator (green)
FDX/COL (TX or FX-port) yellow: full-duplex operation; blink: collision in half-duplexoperation
LNK/ACT (TX or FX-port) green: link operational; blink: port activity
100 Green: 100Base-TX connection (TX-port); off: 10Base-TX connection
EnvironmentalOperating temperature 0°C to +50°C (+32°F to +122°F)
Storage temperature -10°C to +70°C (+14°F to +158°F)
Relative humidity <95% with no condensation
PoweringUniversal AC/DC adapter (included) +12VDC, 0.23A (2.76W)
MechanicalDimensions (h x w x d) 23.8 x 80.3 x 109.2mm (0.94 x 3.16 x 4.3in)
Weight 500g (1.1lb)
Housing Standalone
Ordering informationModels Description
XSNet™ 3300MC 10/100/1000Base-TX to 100/1000Base-FX media converter
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsXSNet™ 3300MC SFP
www.tkhsecurity.com
Technical SpecificationsXSNet™ 3300MC SFP
Description
The Siqura® ECO-plug module is the smallest form factorEthernet over coax device on the market for converting legacyanalog CCTV systems to state of the art network surveillance. Itenables Siqura IP cameras to connect directly to coaxial cables.These hot pluggable modules take power directly from thecamera or switch so no additional cabling and power supplies arerequired, reducing installation time and increasing systemreliability. When converting the head-end system with the XSNETseries multi-port SFP network switches, the Siqura ECO-plugsolution requires the least rack space and consumes the leastpower, reducing the total cost of ownership.
ECO-plugEthernet over Coax SFP Module
Features
• Support legacy analog video cabling up to 720m (coaxtype dependent)
• Hot-swappable
• Small Form Factor Pluggable (SFP) MultisourceAgreement (MSA) compliant
• Compliant with IEEE 802.3 Ethernet standard
• 100Mb SFP slot support
• Fully transparent 100BaseT Ethernet
• Supports direct connection to IP cameras
• Extends networks over existing coax
ElectricalInterface(s) Small Form-Factor Pluggable (SFP) Multi-Source Agreement (MSA)-compliant
Power consumption 0.7W
Connector type 1.0/2.3 DIN female 75Ω
Cable impedance 75Ω typical
Data throughput 100Mbps full-duplex (200Mbps total up and down)
Cable compatibilityType Gauge Core type Maximum distance
RG59 23 copper or copper clad steel 150-200m (500-650ft)
RG59 20 copper 270-300m (900-1000f)t
RG6 18 copper 400-500m (1300-1600ft)
RG11 14 copper 500-600m (1600-2000ft)
RG11 low loss 14 copper 600-720m (2000-2300ft)
Note: The lower end of the Max. Distance range applies to environments with higher EMC noise levels, such as a railwayelectromagnetic environment.For information about the use of the ferrite, EMC requirements, and railway application, download Siqura’s “Ethernet over Coax”application note at www.siqura.com.
LED indicatorsGreen - solid Ethernet link on
Green - blink Power OK, no link
Green - off No power
MechanicalHousing SFP
Cable accessory* 1.0 / 2.3 DIN male to BNC female (40cm or 2m)*Contact Siqura for other cable requirements.
www.tkhsecurity.com
Technical SpecificationsECO-plug
EnvironmentOperating temperature -25°C to +60°C (-13°F to +140°F)
Relative humidity 5% to 95% with no condensation
CompatibilityCameras and codecs Siqura codecs with SFP ports and BC620WDR-SFP and HSD62x series cameras*
Media converters Siqura XSNet™ 3000 series
XSNet 3300MC SFP 10/100/1000BASE-TX and 1-port 100/1000 FX SFP media converter
Network switches Siqura XSNet™ S4000 Series; C4000 series:
XSNet C4104SW 4-port 10/100BASE-TX and 2-port 100BASE-FX SFP Ethernet switch, hardened
XSNet S4104SW 4-port 10/100BASE-TX and 2-port 100BASE-FX SFP Ethernet switch, non-hardened
XSNet S4124SW SFP 24-port 100BASE-SFP and 4-port combo (gigabit SFP with 10/100/1000BASE-TX)managed Ethernet switch, non-hardened
* Consult Siqura for specific codec and server models.Note: Gigabit SFP ports are not supported. Consult Siqura regarding other switches/models.
Ordering informationModels Description
ECO-plug Ethernet over coax, SFP Module, 100Mb with accessory cable, 40cm
ECO-plug BNC patch panel Patch panel, 19” rack plate, 24 channels, 1RU, for BNC bulkhead grounding
ECO-plug adapter cable BNC bulkhead 40cm* Adapter cable, 40cm, for ECO-plug, DIN 1.0 / 2.3 male to BNC bulkhead female
ECO-plug adapter cable BNC bulkhead 2m* Adapter cable, 2m, for ECO-plug, DIN 1.0 / 2.3 male to BNC bulkhead female
Ferrite 1325-0530 (cable clamp type) Ferrite for ECO-Plug, for 5mm cable
ECO-plug BNC ground strap 5cm BNC grounding wire assembly for BNC bulkhead, 5cm*Contact Siqura for other cable requirements.
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical SpecificationsECO-plug
Description
Small Form-Factor Pluggables (SFPs) are standardised modularoptical transceivers for gigabit Ethernet (1000Base-FX) or FastEthernet (100Base-FX).
The XSNet™ SFPs are available in a wide range of models formulti-mode or single- mode, various distances, one or two fibers,and for CWDM applications. With this variety of models, anynetwork solution can be realised, while maintaining flexibility andscalability at a competitive price level.
The XSNet™ SFPs are available for multi-mode and single-modeoptical fiber.
They are optimised for use with many of Siqura’s HSD62x andBC620 series cameras as well as XSNet™ 3300 series mediaconverters and XSNet™ 4000 and 4200 series switches.
XSNet™ SFPSmall Form-Factor Pluggables
Features
• Small Form-Factor Pluggable (SFP) Multi-SourceAgreement (MSA)-compliant
• Compliant with the IEEE 802.3 Ethernet standard
• Hot-swappable
• Dual LC connector (SC connector for 1-fiber solution)
• Compatible with gigabit and 100Mb networks(100/1000Base-FX)
• Single power supply 3.3V
* The XSNet SFPs are supported by the XSNet 4100 and 4200 series switches and the XSNet 3300 media converter.
ElectricalInterface(s) Small Form-Factor Pluggable (SFP) Multi-Source Agreement (MSA)-compliant
StandardsIEEE 802.3u 100Base-SX, FX specification
IEEE 802.3z 1000Base-SX, LX specification
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MechanicalHousing SFP
Optical
XSNet SFPSM BidiA/BidiB
XSNet SFPMM/850
XSNet SFPMM/1310
XSNet SFPSM/10
XSNet SFPSM/60
XSNet SFPSM/CWDM-l
Fiber type 1xSM 2xMM 2xMM 2xSM 2xSM 2xSM
Optical return loss >45dB >14dB >14dB >25dB >45dB >45dB
Output wavelength 1310nm/1490nm 850nm 1310nm 1310nm 1550nm |= a, b, ..., h1
System link budget 13dB 7.5dB 12dB 10.5dB 18dB 25dB
Link length
Minimum link loss 0 dB 0dB 0dB 0dB 0dB 5dB
Output power -9 to -3dBm/-9to -3dBm -9.5 to -4dBm -14 to -20dBm -9 to -3dBm -5 to -3dBm -3 to +2dBm
Input sensitivity -22dBm/-22dBm -17dBm -32dBm -22dBm -23dBm -28dBm
Connector type SC Dual LC Dual LC Dual LC Dual LC Dual LC
Ethernet 100/1000Mb/s 100/1000Mb/s 100Mb/s 100/1000Mb/s 100/1000Mb/s 100/1000Mb/s1 a = 1470 nm, b = 1490 nm, . . ., h = 1610 nm
www.tkhsecurity.com
Technical SpecificationsXSNet™ SFP
Ordering informationModels Description
XSNet™ SFP MM/850 2-fiber multimode SFP (100/1000Base-FX)
XSNet™ SFP MM/1310 2-fiber multimode SFP (100Mb only)
XSNet™ SFP SM/10 2-fiber single-mode SFP, dual LC connector
XSNet™ SFP SM/BidiA 1-fiber single-mode SFP,SC connector
XSNet™ SFP SM/BidiB 1-fiber single-mode SFP, SC connector
XSNet™ SFP SM/60 Long distance 2-fiber single-mode SFP, dual LC connector
XSNet™ SFP SM/CWDM* 2-fiber single-mode SFP CWDM SFP, dual LC connector
* a = 1470 nm, b = 1490 nm, ..., h = 1610 nm
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsXSNet™ SFP
Description
Siqura’s Pico™ Camera Kit includes everything you need totransmit a camera signal over multi-mode fiber. The miniaturePico™ transmitter may be connected directly to the camera’sBNC output. Using multi-mode optical fiber, the camera signal istransmitted to the Pico™ RX receivers, which convert it back intoa standard video signal. The Pico™ RX is equipped withautomatic gain control (AGC) with a wide dynamic range,ensuring rapid deployment and adjustment free installation ofyour fiber optic camera link.
The optional Pico™ video adapter cord offers additionalflexibility in mounting. For even more flexibility, the Pico™transmitter and Pico™ RX receiver are interoperable with Siqura’sVBS 2000 series.
Pico™ series
Features
• Miniature optical video transmitter
• Cost-effective camera connection kit for all-in-one, plug-and-play installation
• Suitable for indoor and outdoor applications
• Direct camera mounting
• Adjustment-free installation and operation (automaticgain control)
• Video SNR >60 dBw for short link
x1
VideoVideo format NTSC, PAL, SECAM
Input/output level 1Vpp (±3dB)
Bandwidth 10MHz (-3dB)
Differential phase <5.0°
Differential gain <5.0%
Signal-to-noise ratio
Short link >60dBw
Over optical budget >45dBw
Connector type 75Ω BNC (gold-plated center pin)
ManagementLED status indicators (RX only)
DC Power-on indicator (green)
Video present Video present (green)
Network management No
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
PoweringPower consumption
Pico™ <1.5W
Pico™ RX 1.8W
Power supply Voltages
Pico™ 11 to 24VDC
Pico™ RX 11 to 16VDC (PSA-UN12DC or PSR-12DC)
www.tkhsecurity.com
Technical SpecificationsPico™ series
MechanicalPico™ 23 x 31 x 60mm (0.9 x 1.2 x 2.3in), including connector
Pico™ RX 110 x 78 x 28mm (4.3 x 3.1 x 1.1in), including connector
Pico™ 50g (1.76oz)
VBS 20xx RX 200g (7.05oz)
Optical Pico™ - Pico™ RX Pico™ - VBS 2010 RX
Fiber type MM (62.5) MM (62.5)
Output wavelength 850nm 1310nm
System link budget 16dB1 16dB1
Output power >-20dBm >-20dBm
Input sensitivity <-36dBm <-36dBm
Connector type ST ST1For 50/125μm fiber, subtract 4dB.
Ordering informationModels Description
Pico Miniature video transmitter
Pico RX Video receiver
Pico Camera Kit / x 2 1x Pico™, 1x standalone receiver (Pico™ RX), 1x power adapter
Pico AC-25 Pico™ adapter cord, BNC(M)-BNC(F), 25cm
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsPico™ series
Description
On an extremely small footprint, Siqura’s Up-the-Fiber™ digitalline of equipment provides high quality, 9-bit digitised videotransmission at an exceptionally low price. Up-the-Fiber™ 4000series receivers can handle one or two video/CC channels. TheUp-the-Fiber™ system also provides an isolated alarm contactclosure output (door contacts, anti-tamper contacts, etc.).
Their wide operating temperature range makes these compact,standalone transmitters suitable for use in outdoor camerahousings and camera connection boxes. UTF receivers are alsoavailable as standalone units. All miniature standalone modelscan be powered by the camera power supply (12VDC or 24VAC);a PSR-12DC is recommended in case of extreme environmentalconditions.
Up-the-Fiber™ 4000Miniature digital video transmitter, CC
Features
• High-quality 9-bit video ≥63dBw SNR over any type offiber
• Miniature transmitters (<2 x 2 x 1in)
• High-density receivers
• DC and AC camera powering
• Alarm contact
x1
x1
VideoNumber of channels 1
Video format NTSC, PAL, SECAM
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz (-3dB)
Sampling resolution 9-bit effective
Group delay <20ns
Differential phase <1.0°
Differential gain <2.0%
Signal-to-noise ratio >63dBw
Connector type 75Ω BNC (gold-plated center pin)
Contact closuresNumber of channels 1
Input (TX) +3.3V pull-up, 2.2kΩ
Threshold 1.4V
Output (RX) Fail-safe, isolated; 100mA/50V
ManagementLED status indicators
TX models Power-on (green), local synchronization error (red), remote synchronization error(yellow)
RX models NV: no video on input or output (red);Sync: operational link (green), local synchronization error (red), remotesynchronization error (yellow)
Network management SNM™ compatible
SNM™ variables PS voltages, module temperature, module status, configuration, etc.
www.tkhsecurity.com
Technical SpecificationsUp-the-Fiber™ 4000
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >250,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
PoweringPower consumption <3W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 12VDC (PSA-UN12DC or PSR-12DC)
Miniature standalone transmitters 12VDC or 24 VAC (PSA-UN12DC or PSR-12DC)
MechanicalStandalone
Dimensions (h x w x d) 45 x 45 x 25mm (1.77 x 1.77 x 0.98in)
Weight 250g (8.81oz)
Rack-mount units
Dimensions (h x w x d) 128 x 71 x 190mm (5 x 2.8 x 7.48in)
Weight 450g (15.87oz)
Optical
UTF 4000TX/RX
UTF 4040TX/RX
Fiber type MM (62.5) SM (9)
Output wavelength 1310nm 1310nm
System link budget 23dB1 23dB1
Link length 6km2 46km2
Minimum link loss 0dB 0dB
Output power >-12dBm1 >-12dBm1
Input sensitivity -36dBm -36dBm
Connector type SC SC1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels Description Fiber type
UTF 4000 RX Digital video receiver with alarm contact 1xMM
UTF 4000 RX-2 Dual digital video receiver with alarm contact 2xMM
UTF 4000 TX-MSA Miniature digital video transmitter with alarm contact 1xMM
UTF 4040 RX Digital video receiver with alarm contact 1xSM
UTF 4040 RX-2 Dual digital video receiver with alarm contact 2xSM
UTF 4040 TX-MSA Miniature digital video transmitter with alarm contact 1xSM
UTF 40xx/ SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsUp-the-Fiber™ 4000
Description
Siqura’s VBS 2000 series offers a complete range of low-costfiber optic video transmitters and receivers. Built-in automaticgain control (AGC) allows plug-and-play installation andmaintenance-free operation. VBS transmitters and receivers areavailable in standalone or rack-mount housings for both single-mode and multi-mode applications.
The very compact VBS 2020 TX and VBS 2050 TX transmitters aredesigned to operate over a broad temperature range and aretherefore suitable for use close to cameras or even insideoutdoor camera housings.
The rack-mount versions are designed to be slotted into MC 10or MC 11 power supply cabinets. Rack-mount models are alsoavailable as standalone units (/SA versions). The space-savingVBS 2020 TX-3 transmitters and RX-3 receivers can provide up to33 video transmission links, using only a single MC 10 or MC 11power supply cabinet at each location.
The compact VBS 2020 and 2050 standalone transmitters arepowered by a PSA-UN12DC power adapter or, for extremeenvironmental conditions, a PSR-12 DC power supply unit.
VBS 2000Video modems
Features
• AM video
• Adjustment-free operation (automatic gain control)
• Easy to instal
• Compact standalone and rack-mount versions
• Video SNR >60 dBw for short link
x1
VideoVideo format NTSC, PAL, SECAM
Input/output level 1Vpp (±3dB)
Bandwidth 10MHz (-3dB)
Differential phase <5.0°
Differential gain <5.0%
Signal-to-noise ratio
Short link >60dBw
Over optical budget >45dBw
Connector type 75Ω BNC (gold-plated center pin)
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input or output (red)
Network management SNM™ compatible
SNM™ variables Voltages, module temperature, alarm status (VBS 2050 only)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
www.tkhsecurity.com
Technical SpecificationsVBS 2000
PoweringPower consumption
VBS 2010 TX 0.5W
VBS 2010 RX 1.7W
VBS 2020 TX 0.5W
VBS 2020 TX-3 1.3W
VBS 2020 RX-3 5.2W
VBS 2050 TX 0.75W
VBS 2050 TX-3 1.7W
VBS 2050 RX-3t 6W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA)
VBS 20xx /SA 11 to 16VDC (PSA-UN12DC or PSR-12DC)
VBS 2020/2050 TX 8 to 25VDC
MechanicalVBS 2020/2050 TX
Dimensions (h x w x d) 33 x 60 x 90mm (1.3 x 2.36 x 3.54in)
Weight 140g (4.93oz)
Other models
Dimensions (h x w x d) 35 x 128 x 190mm (1.38 x 5.04 x 7.48in)
Weight 450g (15.87oz)
Optical
VBS 2010TX/RX
VBS 2020TX/RX
VBS 2050TX/RX
Fiber type MM (62.5) MM (62.5) SM (09)
Output wavelength 850nm 850nm 1300nm
System link budget 16dB1 16dB1 12dB
Link length 5km 5km 24km
Minimum link loss 0dB 0dB 0dB
Output power >-18dBm1 >-18dBm1 >-28dBm
Input sensitivity1 <-34dBm <-34dBm <-40dBm
Connector type ST ST ST1For 50/125μm fiber, subtract 4dB.
www.tkhsecurity.com
Technical SpecificationsVBS 2000
Ordering informationModels Description Fiber type
VBS 2010 TX Video transmitter 1xMM
VBS 2010 RX Video receiver 1xMM
VBS 2020 TX Video transmitter, matchbox 1xMM
VBS 2020 TX-3 Video transmitter, triple 3xMM
VBS 2020 RX-3 Video receiver, triple 3xMM
VBS 2050 TX Video transmitter, matchbox 1xSM
VBS 2050 TX-3 Video transmitter, triple 3xSM
VBS 2050 RX-3 Video receiver, triple 3xSM
VBS 20xx /SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsVBS 2000
Description
On an extremely small footprint, Siqura’s Up-the-Fiber™ (UTF)digital line of equipment provides high quality, 9-bit digitisedvideo transmission with bidirectional data at an exceptionally lowprice. UTF systems work with one or two multi-mode opticalfibers.
Up-the-Fiber receivers can handle one or two video, data, or CCchannels. The UTF module supports EasyC-s. With EasyC-s, agroup of receivers uses only one external data connection,simplifying system implementation and maintenance. The dataport only needs to be configured on the receiver; the transmitterautomatically follows.
The bidirectional RS-485/422 data interface supports PTZ datafrom all types of camera interfaces including RS-485, TTY,Manchester, Bi-phase, SensorNet, etc. In addition, the moduleoffers an isolated alarm contact closure output such as doorcontacts, anti-tamper contacts, etc.
Their wide operating temperature range makes the compact,standalone transmitters suitable for use in outdoor camerahousings and camera connection boxes, for example. UTFreceivers are also available as standalone units.
Up-the-Fiber™ 4200 MMMiniature digital video transmitter, data, CC
Features
• High-quality 9-bit video ≥63dBw SNR over any type offiber
• Miniature transmitters (<2 x 2 x 1in)
• High-density receivers
• DC and AC camera powering
• Alarm contact
x1
x1
x1
VideoNumber of channels 1
Video format NTSC, PAL, SECAM
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz (-3dB)
Sampling resolution 9-bit effective
Group delay <20ns
Differential phase <1.0°
Differential gain <2.0%
Signal-to-noise ratio >63dBw
Connector type 75Ω BNC (gold-plated center pin)
Contact closuresNumber of channels 1
Input (TX) +3.3V pull-up, 2.2kΩ
Threshold 1.4V
Output (RX) Fail-safe, isolated; 100mA/50V
ManagementLED status indicators (RX only)
TX models Power-on (green), local synchronization error (red), remote synchronization error(yellow)
RX models NV: no video on input or output (red),Sync: operational link (green), local synchronization error (red), remotesynchronization error (yellow)
Network management SNM™ compatible
SNM™ variables PS voltages, module temperature, module status, configuration, etc.
www.tkhsecurity.com
Technical SpecificationsUp-the-Fiber™ 4200 MM
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >250,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
PoweringPower consumption <3W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 12VDC (PSA-UN12DC or PSR-12DC)
Miniature standalone transmitters 12VDC (PSA-UN12DC or PSR-12DC) or 24 VAC
MechanicalStandalone
Dimensions (h x w x d) 45 x 45 x 25mm (1.77 x 1.77 x 0.98in)
Weight 250g (8.81oz)
Rack-mount units
Dimensions (h x w x d) 128 x 71 x 190mm (5 x 2.8 x 7.48in)
Weight 450g (15.87oz)
Optical
UTF 4200TX/RX
UTF 4210TX/RX
Fiber type 2xMM (62.5) 1xMM (62.5)
Output wavelength 1300nm 1310/1550nm
System link budget 15dB1 23dB1
Link length 6km2 6km2
Minimum link loss 0dB 0dB
Output power >-17dBm1 >-12dBm1
Input sensitivity -32dBm -35dBm
Connector type SC SC1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
www.tkhsecurity.com
Technical SpecificationsUp-the-Fiber™ 4200 MM
Ordering informationModels Description Fiber type
UTF 4200 TX-MSA Miniature digital video transmitter with CC and 2-way data 2xMM
UTF 4200 RX Digital video receiver with CC and 2-way data 2xMM
UTF 4200 RX-2 Dual digital video receiver with CC and 2-way data 4xMM
UTF 4210 TX-MSA Miniature digital video transmitter with CC and 2-way data 1xMM
UTF 4210 RX Digital video receiver with CC and 2-way data 1xMM
UTF 4210 RX-2 Dual digital video receiver with CC and 2-way data 2xMM
UTF 4210 TX/ Bosch Video transmitter for in-dome solutions: Bosch AutoDome™ or EnviroDome™ 1xMM
UTF 42xx/ SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsUp-the-Fiber™ 4200 MM
Description
On an extremely small footprint, Siqura’s Up-the-Fiber™ (UTF)digital line of equipment provides high quality, 9-bit digitisedvideo transmission with bidirectional data at an exceptionally lowprice. UTF systems work with one or two single-mode opticalfibers.
Up-the-Fiber receivers can handle one or two video, data, or CCchannels. The UTF module supports EasyC-s. With EasyC-s, agroup of receivers uses only one external data connection,simplifying system implementation and maintenance. Also, toconfigure the data port, only the receiver has to be set; thetransmitter automatically follows.
The bidirectional RS-485/422 data interface supports PTZ datafrom all types of camera interfaces including RS-485, TTY,Manchester, Bi-phase, and SensorNet. In addition, the moduleoffers an isolated alarm contact closure output such as doorcontacts, anti-tamper contacts, etc.
Their wide operating temperature range makes these compact,stand-alone transmitters suitable for use in outdoor camerahousings and camera connection boxes, for example. UTFreceivers are also available as standalone units.
Up-the-Fiber™ 4200 SMMiniature digital video transmitter, data, CC
Features
• High-quality 9-bit video ≥63dBw SNR over 1 or 2 single-mode fibers
• EasyC-s™ time-saving PTZ connection andconfiguration
• Miniature transmitters (<2 x 2 x 1in)
• High-density receivers
• 12VDC and 24VAC direct powering
• High-speed data channel supporting all major PTZ/dome cameras
• Alarm contact
x1
x1
x1
VideoNumber of channels 1
Video format NTSC, PAL, SECAM
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz (-3dB)
Sampling resolution 9-bit effective
Group delay <20ns
Differential phase <1.0°
Differential gain <2.0%
Signal-to-noise ratio >63dBw
Connector type 75Ω BNC (gold-plated center pin)
DataNumber of channels 1 (full-duplex)
Data interfaces RS-422/485 (2- or 4-wire)
Interface support Current loop, TTL, TTY, Manchester, Bi-phase
Data format Asynchronous, serial
Data rate DC to 230kb/s
Connector type 6-pin screw terminal
EasyC-s™ Backplane data bus wiring and single-point configuring (RX)
Contact closuresNumber of channels 1
Input (TX) +3.3V pull-up, 2.2kΩ
Threshold 1.4V
Output (RX) Fail-safe, potential-free; 100mA/50V
www.tkhsecurity.com
Technical SpecificationsUp-the-Fiber™ 4200 SM
ManagementLED status indicators
TX models Power-on (green), local synchronization error (red), remote synchronization error(yellow)
RX models NV: no video on input or output (red)Sync: operational link (green), local synchronization error (red), remotesynchronization error (yellow)
Network management SNM™ compatible
SNM™ variables PS voltages, module temperature, module status, configuration, etc.
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >250,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
PoweringPower consumption <3W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 12VDC (PSA-UN12DC or PSR-12DC)
Miniature standalone transmitters 12VDC (PSA-UN12DC or PSR-12DC) or 24 VAC
MechanicalStandalone
Dimensions (h x w x d) 45 x 45 x 25mm (1.77 x 1.77 x 0.98in)
Weight 250g (8.81oz)
Rack-mount units
Dimensions (h x w x d) 128 x 71 x 190mm (5 x 2.8 x 7.48in)
Weight 450g (15.87oz)
Optical
UTF 4240TX/RX
UTF 4250TX/RX
Fiber type 2xSM (09) 1xSM (09)
Output wavelength 1310nm 1310nm/1550nm
System link budget 23dB 23dB
Link length 46km 46km
Minimum link loss 0dBm 9dBm
Output power >-12dBm >-12dBm/>-12dBm
Input sensitivity -32dBm -35dBm/-35dBm
Connector type SC SC
www.tkhsecurity.com
Technical SpecificationsUp-the-Fiber™ 4200 SM
Ordering informationModels Description Fiber type
UTF 4240 TX-MSA Miniature digital video transmitter with CC and 2-way data 2xSM
UTF 4240 RX Digital video receiver with CC and 2-way data 2xSM
UTF 4240 RX-2 Dual digital video receiver with CC and 2-way data 2xSM
UTF 4250 TX-MSA Miniature digital video transmitter with CC and 2-way data 1xSM
UTF 4250 RX Digital video receiver with CC and 2-way data 1xSM
UTF 4250 RX-2 Dual digital video receiver with CC and 2-way data 1xSM
UTF 4250 TX /Bosch Video transmitter for in-dome solutions: Bosch AutoDome™ or EnviroDome™
UTF 42xx /SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsUp-the-Fiber™ 4200 SM
Description
On an extremely small footprint, Siqura’s fiber optic Up-the-Fiber™ series provides high-quality, 9-bit digitised videotransmission supporting Bosch’s Bilinx™ protocol over extendeddistances. UTF 4200 exceeds the normally limited Bilinx™protocol using digital processing and intelligent features.
The UTF 4200 uses either one single-mode or one or two multi-mode optical fibers and also features an isolated contact closureoutput to transport alarms from the camera (anti-tamper or doorcontact).
The miniature standalone transmitters are suitable to be usedwithin outdoor camera housings or camera connection boxes.UTF 4200 receivers are also available as standalone units (/SA).
Up-the-Fiber™ 4200 Bilinx™Digital video transmitter with Bosch Bilinx™ protocol
Features
• High-quality 9-bit video ≥63dBw SNR
• Bosch Bilinx™ Up-the-Coax protocol
• Miniature transmitters (<2 x 2 x 1in)
• High-density receivers
• 12VDC and 24VAC direct powering
• Alarm contact
• Unique time-saving connection and configuration
x1
x1
x1
Includes the Bosch Dome Camera Application with an in-dome mounting bracket.
VideoNumber of channels 1
Video format NTSC, PAL, SECAM
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz (-3dB)
Sampling resolution 9-bit effective
Group delay <20ns
Differential phase <1.0°
Differential gain <2.0%
Signal-to-noise ratio >63dBw
Connector type 75Ω BNC (gold-plated center pin)
DataNumber of channels 1 (full-duplex)
Data interfaces Up-the-Coax
Interface support Bosch Bilinx™
Contact closuresNumber of channels 1
Input (TX) +3.3V pull-up, 2.2kΩ
Threshold 1.4V
Output (RX) Fail-safe, potential-free; 100mA/50V
ManagementLED status indicators
TX models Power-on (green), local synchronization error (red), remote synchronization error(yellow)
RX models NV: no video on input or output (red)Sync: operational link (green), local synchronization error (red), remotesynchronization error (yellow)
Network management SNM™ compatible
SNM™ variables PS voltages, module temperature, module status, configuration, etc.
www.tkhsecurity.com
Technical SpecificationsUp-the-Fiber™ 4200 Bilinx™
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >250,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
PoweringPower consumption <3W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 12VDC (PSA-UN12DC with ferrules or PSR-12 DC)
Miniature standalone transmitters 12VDC (PSA-UN12DC with ferrules or PSR-12 DC) or 24 VAC
MechanicalStandalone
Dimensions (h x w x d) 45 x 45 x 25mm (1.77 x 1.77 x 0.98in)
Weight 250g (8.81oz)
Rack-mount units
Dimensions (h x w x d) 128 x 71 x 190mm (5 x 2.8 x 7.48in)
Weight 450g (15.87oz)
Optical
UTF 4200TX/RX
UTF 4210TX/RX
UTF 4250TX/RX
Fiber type 2xMM (62.5) 1xMM (62.5) 1xSM (09)
Output wavelength 1310nm 1310nm/1550nm 1310nm/1550nm
System link budget 23dB2 23dB 23dB
Link length 6km1 6km1 46km
Minimum link loss 0dBm 0dBm 9dBm
Output power >-12dBm2 >-12dBm/>-12dBm >-12dBm/>-12dBm
Input sensitivity -35dBm -35dBm/-35dBm -35dBm/-35dBm
Connector type SC SC SC1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
www.tkhsecurity.com
Technical SpecificationsUp-the-Fiber™ 4200 Bilinx™
Ordering informationModels Description Fiber type
UTF 4200 TX-MSA/ Bilinx Miniature digital video transmitter with CC for Bosch Bilinx™ 2xMM
UTF 4200 RX/ Bilinx Digital video receiver with CC for Bosch Bilinx™ 2xMM
UTF 4200 RX-2/ Bilinx Dual digital video receiver with CC for Bosch Bilinx™ 2xMM
UTF 4210 TX-MSA/ Bilinx Miniature digital video transmitter with CC for Bosch Bilinx™ 1xMM
UTF 4210 RX/ Bilinx Digital video receiver with CC for Bosch Bilinx™ 1xMM
UTF 4210 RX-2/ Bilinx Dual digital video receiver with CC for Bosch Bilinx™ 1xMM
UTF 4250 TX-MSA/ Bilinx Miniature digital video transmitter with CC for Bosch Bilinx™ 1xSM
UTF 4250 RX/ Bilinx Digital video receiver with CC for Bosch Bilinx™ 1xSM
UTF 4250 RX-2/ Bilinx Dual digital video receiver with CC for Bosch Bilinx™ 1xSM
UTF 42xx/Bilinx/ SA Standalone version of rack-mount models
In-dome mounting bracket Bracket to mount a UTF TX-MSA inside a Bosch AutoDome® or EnviroDome®
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification..
Technical SpecificationsUp-the-Fiber™ 4200 Bilinx™
Description
The Optelecom® 9111D series models transport one high qualityvideo over one optical fiber. They provide digital quality videotransmission in simple, easy-to-use packages. The rack-mountversions can support up to 54 channels in a 4 RU high, 19” rackspace.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9111D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9111D series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9111D series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9111D rack-mount card,use the 9003-2 mini chassis.
9111D Series1-channel video
Features
• Single-channel video transmitters and receivers
• 9-bit uncompressed digital video
• High-quality video ≥63dBw SNR
• Compatible with NTSC and PAL standards
• Standalone and rack-mount versions
• Network Management System (NMS) compatible
x1
VideoVideo format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 1.0% typical
Differential phase 0.7° typical
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-bit linear PCM
Video sampling rate 16MHz
Power Requirements9111DT
Voltage 6VDC
Current 200mA
9111DTTT
Voltage 6VDC
Current 500mA
9111DR
Voltage 6VDC
Current 300mA
9111DRRR
Voltage 6VDC
Current 800mA
9113DT
Voltage 8-15VDC
Current 110mA at 12VDC
9114DR
Voltage 8-15VDC
Current 150mA at 12VDC
www.tkhsecurity.com
Technical Specifications9111D Series
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9111DT, 9111DTTT, 9111DR,9111DRRR
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm(6.1 x 0.8 x 8.6in)
Weight 136g (4.79oz)
9113DT
Housing Miniature standalone
Dimensions (h x w x d) 19.0 x 19.0 x 121.9mm(0.75 x 0.75 x 4.8in)
Weight 90.7g (3.18oz)
9114DR
Housing Standalone
Dimensions (h x w x d) 25.4 x 68.6 x 109.2mm(1.0 x 2.7 x 4.3in)
Weight 136g (4.79oz)
Optical
9111DT-L9111DR-L
9111DT-LD9111DR-L
9111DTTT-LD9111DRRR-L
9113DT-LD9111DR-L
9113DT-LD9114DR-L
Fiber type MM (62.5) SM (09) SM (09) SM (09) SM (09)
Output wavelength 1310nm 1310nm 1310nm 1310nm 1310nm
Output power -17dBm -7dBm -7dBm -7dBm -7dBm
Input sensitivity -29dBm -30dBm -30dBm -30 dBm -30dBm
System link budget 12dB1 23dB 23dB 23dB 23dB
Fiber length (range)2 5km2 57km 57km 57km 57km
Connector type ST (others optional) ST (others optional) ST (others optional) ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
Ordering informationModels Description Fiber type
9111DT-L-ST 9-bit digital video transmitter 1xMM
9111DTTT-L-ST Triple 9-bit digital video transmitter 3xMM
9114DR-LM-ST Compact digital video receiver 1xMM
9111DRRR-L-ST Triple 9-bit digital video receiver 3xMM, 3xSM
9111DT-LD-ST 9-bit digital video transmitter 1xSM
9111DTTT-LD-ST Triple 9-bit digital video transmitter 3xSM
9113DT-LD-ST Mini digital video transmitter 1xSM
9114DR-L-ST Compact digital video receiver 1xSM
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9111D Series
Description
The Optelecom® 9711 series modules form a simple video/audiosolution designed to transport one video and two stereo audiochannels over one optical fiber. The high quality video and audiotransmission make this pair suitable for use in video/audiodistribution in public areas.
These modules use 16-bit digital transmission for each of the fouraudio channels. Models are available in multi-mode, single-mode, and SpectraStream CWDM versions.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9711D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9711D series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9711D series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9711D rack-mount card,use the 9003-2 mini chassis.
9711D SeriesOne-channel video with two stereo audio channels
Features
• Single-channel video and stereo audio transmitter andreceiver
• 9-bit uncompressed digital video
• High-quality video ≥63dBw SNR
• 4 simplex (2 stereo) audio channels
• Available in a SpectraStream CWDM version
• Standalone and rack-mount versions
• Network Management System (NMS) compatible
x1
x2
VideoVideo format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 1.0%
Differential phase 0.7°
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-bit linear PCM
Video sampling rate 16MHz
Audio2x stereo audio channels
Frequency response 20Hz to 20kHz, SNR ≥78dB
Input Input impedance 600Ω or 47kΩ, user-selectable, balanced or unbalanced, inputlevel 1.0 to 5.7Vpp
Output Output impedance will match input impedance into 600Ω or greater, balanced orunbalanced
I/O connector 2x 5-pin removable screw terminal
ManagementLED status indicators
9711DT Power, video present
9711DR Sync, TX video present
9715DT Power, video present (x2)
9715DR Sync, not sync, CD, TX video present
Management system 9900 Network Management System (NMS)
www.tkhsecurity.com
Technical Specifications9711D Series
Power requirements9711DT
Voltage 6VDC (chassis)
Current 220mA
9711DR
Voltage 6VDC (chassis)
Current 250mA
9715DT
Voltage 8-15VDC
Current 280mA at 12VDC
9715DR
Voltage 8-15VDC
Current 320mA at 12VDC
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9711DT, 9711DR
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (9.59oz)
9715DT, 9715DR
Housing Standalone chassis (size 5)
Dimensions (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.3 x 5.0in)
Weight 362.9g (12.8oz)
Optical9711DT-L / 9711DR-L 9711DT-LD / 9711DR-L
Fiber type MM (62.5) SM (09)
Output wavelength 1310nm 1310nm
Output power -17dBm -7dBm
Input sensitivity -29dBm -30dBm
System link budget 16dB1/23dB1 21dB/25dB
Fiber length (range)2 6km 57km
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
www.tkhsecurity.com
Technical Specifications9711D Series
Ordering informationModels Description Fiber type
9711DT-L-ST Digital video with stereo audio 1xMM
9711DR-LM-ST Digital video with stereo audio 1xMM
9711DT-LD-ST Digital video with stereo audio 1xSM
9711DR-L-ST Digital video with stereo audio 1xSM
9715DT-LD-ST Standalone version of the 9711D transmitter model
9715DR-L-ST Standalone version of the 9711D receiver model
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9711D Series
Description
The Optelecom® 9221D series models transport one video signaland one duplex data signal over one optical fiber. They combinehigh-quality digital video transmission with duplex PTZ or otherserial data in one easy-to-use unit.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9221D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9221 series comes as a rack-mount version suitable for a9002 or 9008 power supply cabinet, or as a standalone unit(9225). The 9221 series modules are managed with theOptelecom Network Management System (NMS).
To create a standalone version of the 9221D rack-mount card,use the 9003-2 mini chassis.
9221D SeriesOne-channel video, duplex data
Features
• Single-channel digital video and duplex datatransmitters and receivers
• 9-bit uncompressed digital video
• High-quality video ≥63dBw SNR
• Compatible with NTSC and PAL standards
• 1 duplex user-configurable data channel
• Standalone and rack-mount versions
• Pelco in-dome version
• Network Management System (NMS) compatible
x1
VideoVideo format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 1.0%
Differential phase 0.7˚
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-bit linear PCM
Video sampling rate 16MHz
DataPort Data
Interface Selectable duplex RS-232, RS-422 2- or 4-wire, RS-485 2- or 4-wire, Manchester,Bi-phase
Rate RS-232, RS-422, and RS-458 up to 128kb/s (auto baud), Manchester Bi-phase32kb/s
Connector type 5-pin removable screw terminal except the 9229DT-P that mounts directly to thecamera PC board
ManagementLED status indicators
9221DT, 9225DT Video in, sync, not sync, loop, RD
9221DR, 9225DR Tx video in, loop, sync, not sync, RD
9229DT-P Sync, not loop, RD
Management system 9900 Network Management System (NMS)
www.tkhsecurity.com
Technical Specifications9221D Series
Power requirements9221DT
Voltage 6VDC (chassis)
Current 500mA
9221DR
Voltage 6VDC (chassis)
Current 450mA
9225DT
Voltage 9 to 15VDC
Current 280mA
9225DR
Voltage 9 to 15VDC
Current 500mA
9229DT
Voltage Supplied by camera
Current 160mA
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9221D
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (9.55oz)
9225D
Housing Standalone
Dimensions (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.2 x 5.0in)
Weight 363g (12.8oz)
9229DT-P
Housing Pelco Spectra III internal mount
Dimensions (h x w x d) 78.7 x 19 x 121.9mm (3.1 x 0.75 x 4.8in)
Weight 90.7g (3.2oz)
www.tkhsecurity.com
Technical Specifications9221D Series
Optical
9221DT/DR-MMHTX/RX
9221DT/DR-SMTX/RX
9229DT/9221DR-SMTX/RX
9229DT/9221DR-MMHTX/RX
Fiber type MM (62.5) SM (09) SM (09/125) MM (62.5/125)
Output wavelength 1310nm/1550nm 1310nm/1550nm 1310nm/1550nm 1310nm/1550nm
Output power -7dBm/-7dBm -7dBm/-7dBm -7dBm/-7dBm -30dBm/-30dBm
Input sensitivity -29dBm/-30dBm -30dBm/-30dBm -30dBm/-30dBm -30dBm/-29dBm
System link budget 22dB1/23dB1 23dB1/23dB1 22dB/23dB1 23dB1/23dB1
Fiber length (range)2 19km 57km 57km 19km
Connector type ST (others optional) ST (others optional) ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels Description Fiber type
9221DT/MMH-ST 1-channel digital video transmitter, duplex data 1xMM
9225DT/SM-ST 1-channel digital video transmitter, duplex data 1xSM
9221DR/MMH-ST 1-channel digital video receiver, duplex data 1xMM
9225DR/SM-ST 1-channel digital video receiver, duplex data 1xSM
9229DT-P/MMH-ST In-dome transmitter for Pelco Spectra III 1xMM
9221DT/SM-ST 1-channel digital video transmitter, duplex data 1xSM
9221DR/SM-ST 1-channel digital video receiver, duplex data 1xSM
9229DT-P/SM-ST In-dome transmitter for Pelco Spectra III 1xSM
9225DT/MMH-ST Standalone version of the 9221 models
9225DR/MMH-ST Standalone version of the 9221 models
PSA-UN12DC Wall-Wart, switching power supply
PSR-12DC DIN rail mounting, switching power supply
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9221D Series
Description
The Optelecom® 9281D series modules digitise and transportone video plus duplex data in “up the coax”-type camera controlsystems such as the Panasonic Proteus™, Pelco, TOA and othersimilar systems over one optical fiber.
The Extended distance transmitter (-EX), used with a standardreceiver, overcomes the typical 1.5km distance limitation ofstandard copper and unbuffered fiber “up the coax” systems bybuffering the data and properly injecting it onto the video signalin the subsequent frame.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9281D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9281D series comes as a rack-mount version, suitable for a9002, 9003-2, or 9008 power supply cabinet, or as a standaloneunit. The 9281D series modules are managed with theOptelecom® Network Management System (NMS).
To create a standalone version of the 9281D rack-mount card,use the 9003-2 mini chassis.
9281D SeriesOne-channel video with Up-the-Coax
Features
• Single-channel video transmitters and receivers
• 9-bit uncompressed digital video
• High-quality video ≥63dBw SNR
• Transports duplex “up the coax” PTZ and cameracontrol/data channel information
• Extended distance transmitter (-EX) overcomes distancelimitations of standard “up the coax” systems (-EXversion)
• Standalone and rack-mount versions
• Network Management System (NMS) compatible
x1
UTC
VideoVideo format NTSC, PAL
Video input 1Vpp into 75Ω
Connector BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 1.0%
Differential phase 0.7˚
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-bit linear PCM
Video sampling rate 16MHz
Power requirements9281DT
Voltage 6VDC (chassis)
Current 360mA
9281DT(-EX)
Voltage 6VDC (chassis)
Current 390mA
9281DR
Voltage 6VDC (chassis)
Current 340mA
9285DT(-EX)
Voltage 8-15VDC
Current 230mA at 12VDC
9285DR
Voltage 8-15VDC
Current 150mA at 12VDC
www.tkhsecurity.com
Technical Specifications9281D Series
ManagementLED status indicators
9281DT, 9281DT-EX Sync, video present, data active, VD2 active
9285DT, 9285DT-EX Sync/not sync, loop, video present, data active, VD2 active
9281DR Sync, Tx video present, data active, VD2 active
9285DR Sync/not sync, loop, Tx video present, data active, VD2 active
Management system 9900 Network Management System (NMS)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9281DT, 9281DR
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 272.0g (9.59oz)
9285DT, 9285DR
Housing Standalone chassis (size 5)
Dimensions (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.3 x 5.0in)
Weight 453.6g (1.0lb)
Optical
9281DT/DR-MMHTX/RX
9281DT/DR-SMTX/RX
9281DT-EX/DR-SMTX/RX
Fiber type MM (62.5) SM (09) SM (09)
Output wavelength 1310nm/1550nm 1310nm/1550nm 1310nm/1550nm
Output Power -7dBm/-7dBm -7dBm/-7dBm -7dBm/-7dBm
Input sensitivity -29dBm/-30dBm -32dBm/-32dBm -32dBm/-32dBm
System link budget 22dB1/23dB1 23dB/25dB 25dB/25dB
Fiber length (range)2 approx. 1.5km3 approx. 1.5km3 62km
Connector type ST (others optional) ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
3 Varies slightly depending on the “up-the-coax” camera system used.
www.tkhsecurity.com
Technical Specifications9281D Series
Ordering informationModels Description Fiber type
9281DT/MMH-ST 1-channel “Up-the-Coax” 1xMM
9281DR/MMH-ST 1-channel “Up-the-Coax” 1xMM
9281DR/SM-ST 1-channel“Up-the-Coax” 1xSM
9281DT-EX/SM-ST Extended distance transmitter 1xSM
9285DT/XX-ST Standalone version of the 9281 transmitter model
9285DR/XX-ST Standalone version of the 9281 receiver model
PSA-UN12DC Wall-Wart, switching power supply
PSR-12DC DIN rail mounting, switching power supply
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9281D Series
Description
The Optelecom® 9241D series modules digitise and transportone video, one duplex data, and two Option Module channelsoperating in both directions over one optical fibre. Thededicated data channel and two user selected option data typesmake this model pair a flexible and powerful solution.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9241D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9241D series comes as a rack-mount version, suitable for a9002, 9003-2, or 9008 power supply cabinet, or as a standaloneunit. The 9241D series modules are managed with theOptelecom® Network Management System (NMS).
To create a standalone version of the 9241D rack-mount card,use the 9003-2 mini chassis.
9241D SeriesOne-channel video with 3 duplex data/option channels
Features
• Single-channel video transmitters and receivers
• 9-bit uncompressed digital video
• High-quality video ≥63dBw SNR
• 1 duplex user-configurable data channel(s)
• 2 duplex user-configurable option modules
• Standalone and rack-mount versions
• Network Management System (NMS) compatible
x1
x1
x2
VideoVideo format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 1.0%
Differential phase 0.7˚
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-bit linear PCM
Video sampling rate 16MHz
Option modulesNumber of free channels 2x duplex
A Module 1x audio
B Module 1x user-configurable data (RS-232, RS-422, RS-485)
C Module 1x contact closure
D or E Module 2x audio (simplex only)
GM or GR Module 2x intercom audio
For more information on Option Modules, refer to the Option Modules data sheet or contact TKH Security Solutions.
ManagementLED status indicators
9241DT Sync, video present
9241DR Sync, Tx video present
9245DT Sync, not sync, loop, RC, video present
9245DR Sync, not sync, loop, RC, Tx video present
Management system 9900 Network Management System (NMS)
www.tkhsecurity.com
Technical Specifications9241D Series
Power requirements9241DT
Voltage 6VDC (chassis)
Current 700mA
9241DR
Voltage 6VDC (chassis)
Current 700mA
9245DT
Voltage 8-15VDC
Current 360mA at 12VDC
9245DR
Voltage 8-15VDC
Current 360mA at 12VDC
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9241DT
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (9.55oz)
9241DR
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (9.55oz)
9245DT
Housing Standalone
Dimensions (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.2 x 5.0in)
Weight 363g (12.8oz)
9245DR
Housing Standalone
Dimensions (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.2 x 5.0in)
Weight 363g (12.8oz)
www.tkhsecurity.com
Technical Specifications9241D Series
Optical
9241DT/DR-MMHTX/RX
9241DT/DR-SMTX/RX
Fiber type MM (62.5) SM (09)
Output wavelength 1310nm/1550nm 1310nm/1550nm
Output power -7dBm/-7dBm -7dBm/-7dBm
Input sensitivity -29dBm/-30dBm -30dBm/-30dBm
System link budget 2dB1/23dB1 23dB/23dB
Fiber length (range)2 19km 57km
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels* Description Fiber type
9241DT(XX)/MMH-ST 1-channel video with 3 duplex data/option channels 1xMM
9241DR(XX)/MMH-ST 1-channel video with 3 duplex data/option channels 1xMM
9241DT(XX)/SM-ST 1-channel video with 3 duplex data/option channels 1xSM
9241DR(XX)/SM-ST 1-channel video with 3 duplex data/option channels 1xSM
9245DT Standalone version of the 9421D transmitter model
9245DR Standalone version of the 9421D receiver model
Replace (XX) in model number with code letters for desired Option Modules. For more information on Option Modules, refer to theOption Modules data sheet or contact TKH Security Solutions.
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9241D Series
Description
The Optelecom® 9191D series modules digitise and transporttwo videos and one simplex High-Speed port over one opticalfiber in one direction. 9-bit video sampling provides extremelyhigh video quality. The High-Speed port supports transmission of1.6Mb/s RS-422 or connection to an optional Option ModuleHost card for transport of either four or eight audio, data, orcontact closure signals in the same direction as the video signal.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9191D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9191D series comes as a rack-mount version only, suitablefor a 9002 or 9008 power supply cabinet. The 9191D seriesmodules are managed with the Optelecom NetworkManagement System (NMS).
To create a standalone version of the 9191D rack-mount card,use the 9003-2 mini chassis.
9191D SeriesTwo-channel video with simplex data
Features
• 2-channel video and data transmitters and receivers
• 9-bit uncompressed digital video
• High-quality video ≥63dBw SNR
• Simplex High-Speed (HS) data port
• Available in a SpectraStream CWDM version
• Rack-mount version
• Network Management System (NMS) compatible
x1
VideoVideo format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 1.0%
Differential phase 0.7˚
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-bit linear PCM
Video sampling rate 16MHz
ManagementLED status indicators
9191DT Power, video present (x2)
9191DR Status, TX video present (x2)
Management system 9900 Network Management System (NMS)
Power requirements9191DT
Voltage 6VDC (chassis)
Current 420mA
9191DR
Voltage 6VDC (chassis)
Current 380mA
www.tkhsecurity.com
Technical Specifications9191D Series
High-speed portsNumber of ports 1 x simplex
Data format RS-422 or extension port
Data rate, synchronous RS-422 15Mb/s
Data rate, asynchronous RS-422 ≤1.5Mb/s
Extension port for:
Option module host 9961A-C, 9962A-C
10Mb Ethernet 9971-C, 9972-C
For more information on CWDM options, contact TKH Security Solutions.
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9191DT
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 453.6g (16.0oz)
9191DR
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 453.6g (16.0oz)
Optical
9191DT-LDS/9191D-STX/RX
9191DT-LD/9191DR-LTX/RX
Fiber type MM (62.5) SM (09)
Output wavelength 850nm/850nm 1310nm/1310nm
Output power -7dBm/-7dBm -7dBm/-7dBm
Input sensitivity -30dBm/-30dBm -30dBm/-30dBm
System link budget 17dB1/17dB1 23dB/23dB
Fiber length (range)2 25km 57km
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels Description Fiber type
9191DT-LDS-ST 2-channel digital video and data transmitter 1xMM
9191DR-S-ST 2-channel digital video and data receiver 1xMM
9191DT-LD-ST 2-channel digital video and data transmitter 1xSM
9191DR-L-ST 2-channel digital video and data receiver 1xSM
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9191D Series
Description
The Optelecom® 9292D series modules digitise and transporttwo video channels, four 100Mb/s Fast Ethernet channels, aduplex High-Speed port data channel, and two duplex OptionModule channels over one optical fiber.
The two Option Module channels provide additional transport forany combination of two data, audio, contact closure, or intercomchannels on the same fiber as the video and High-Speed portchannels. The High-Speed port supports duplex 1.5Mb/s RS-422or connection to an optional Option Module Host card fortransport of four or eight duplex audio, data, contact closure, orintercom signals.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9292D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9292D series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9292D series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9292D rack-mount card,use the 9003-2 mini chassis.
9292D SeriesTwo-channel video w/HS port, option modules, Ethernet
Features
• 2-channel video, data, audio, CC or intercomtransmitters and receivers
• 9-bit uncompressed digital video
• Very high quality video ≥67dBw SNR
• 100Mb/s Fast Ethernet switch
• 1 duplex high-speed (HS) port channel
• 2 duplex user-configurable option modules
• Network Management System (NMS) compatible
x2
x4
x2
Video (x4)Video format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 0.7%
Differential phase 0.7˚
Signal-to-noise ratio ≥67dBw
Video encoding Uncompressed 10-bit linear PCM
Video sampling rate 15MHz
Option modulesNumber of free channels 2x duplex
A Module 1x audio
B Module 1x user-configurable data (RS-232, RS-422, RS-485)
C Module 1x contact closure
D or E Module 2x audio (simplex only)
GM or GR Module 2x intercom audio
For more information on Option Modules, refer to the Option Modules data sheet or contact TKH Security Solutions.
High-speed portsNumber of ports 1x duplex
Data format RS-422 or extension port
Data rate
Synchronous RS-422 15Mb/s
Asynchronous RS-422 ≤1.5Mb/s
Extension port for:
Option module host 9961A-C, 9962A-C
10Mb Ethernet 9971-C, 9972-C
Ethernet ports 4x 10/100 Fast Ethernet, autosensing, auto MDIX, full-duplex/half-duplex,autonegotiation, built-in 4-port unmanaged switch, RJ-45 connectors
www.tkhsecurity.com
Technical Specifications9292D Series
ManagementLED status indicators
9292DT Sync, not sync, loop, video present (x2)
9292DR Sync, not sync, loop, Tx video present (x2)
Management system 9900 Network Management System (NMS)
Power requirements9292DT
Voltage 6VDC (chassis)
Current 650mA
9592DR
Voltage 6VDC (chassis)
Current 700mA
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9292DT
Housing 2-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 453.6g (1.0lb)
9292DR
Housing 2-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 453.6g (1.0lb)
Optical
9292DT/DR-MMTX/RX
9292DT/DR-SMTX/RX
9292DT/DR-SMHTX/RX
Fiber type MM (62.5) SM (09) SM (09)
Output wavelength 1310nm/1550nm 1310nm/1550nm 1550nm/1310nm
Output power -7dBm/-7dBm -7dBm/-7dBm -3dBm/-3dBm
Input sensitivity -23dBm/-30dBm 27dBm/-30dBm 27dBm/-30dBm
System link budget 16dB1/16dB1 20dB/23dB 24dB/27dB
Fiber length (range)2 7km2 25km2 68km
Connector type ST (others optional) ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
www.tkhsecurity.com
Technical Specifications9292D Series
Ordering informationModels* Description Fiber type
9292DT(XX)/MMH-ST 2-channel digital video transmitter 1xMM
9292DR(XX)/MMH-ST 2-channel digital video receiver 1xMM
9292DT(XX)/SMH-ST 2-channel digital video transmitter 1xSM
9292DR(XX)/SMH-ST 2-channel digital video receiver 1xSM
9292DT(XX)/SM-ST 2-channel digital video transmitter 1xSM
9292DR(XX)/SM-ST 2-channel digital video receiver 1xSM
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9292D Series
Description
The Optelecom® 9421D series modules digitise and transporttwo video channels, one duplex High-Speed port data channel,and two Option Module channels over one optical fiber, with theOption Module channels operating in both directions.
The two Option Module channels provide additional transport forany combination of two data, audio, contact closure, or intercomchannels on the same fiber as the video and High-Speed portchannels. The High-Speed port supports duplex 1.5Mb/s RS-422or connection to an optional Option Module Host card fortransport of four or eight duplex audio, data or contact closure,or 10Mb/s Ethernet signals.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9421D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9421D series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9421D series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9421D rack-mount card,use the 9003-2 mini chassis.
9421D SeriesTwo-channel video w/HS port and two Option Modules
Features
• 2-channel video transmitters and receivers
• 9-bit uncompressed digital video
• High-quality video ≥63dBw SNR
• 1 duplex high-speed (HS) port
• 2 duplex user-configurable Option Modules
• Standalone and rack-mount versions
• Network Management System (NMS) compatible
x2
x2
Video (x2)Video format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 2.0%
Differential phase 1.0˚
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-bit linear PCM
Video sampling rate 15MHz
Option modulesNumber of free channels 2x duplex
A Module 1x audio
B Module 1x user-configurable data (RS-232, RS-422, RS-485)
C Module 1x contact closure
D or E Module 2x audio (simplex only)
GM or GR Module 2x intercom audio
For more information on Option Modules, refer to the Option Modules data sheet or contact TKH Security Solutions.
ManagementLED status indicators
9421DT Sync, video present (x2)
9425DT Sync, loop, not sync, video present (x2)
9421DR Sync, Tx video present (x2)
9425DR Sync, loop, not sync, Tx video present (x2)
Management system 9900 Network Management System (NMS)
www.tkhsecurity.com
Technical Specifications9421D Series
High-speed portsNumber of ports 1x duplex
Data format RS-422 or extension port
Data rate
Synchronous RS-422 15Mb/s
Asynchronous RS-422 ≤1.5Mb/s
Extension port for:
Option module host 9961A-C, 9962A-C
10Mb Ethernet 9971-C, 9972-C
Ethernet ports 10/100 Fast Ethernet, autosensing, auto MDIX, full-duplex/half-duplex,autonegotiation, built-in 4-port unmanaged switch, RJ-45 connectors
For more information on HS port capabilities, contact TKH Security Solutions.
Power requirements9421DT
Voltage 6VDC (chassis)
Current 650mA
9421DT
Voltage 6VDC (chassis)
Current 700mA
9425DT
Voltage 8-15VDC
Current 370mA at 12VDC
9425DR
Voltage 8-15VDC
Current 370mA at 12VDC
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9421DT, 9421DR
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (9.6oz)
9425DT, 9425DR
Housing Standalone chassis (size 5)
Dimensions (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.3 x 5.0in)
Weight 464g (16.4oz)
www.tkhsecurity.com
Technical Specifications9421D Series
Optical9421DT/DR-MMHTX/RX
9421DT/DR-SMTX/RX
Fiber type MM (62.5) SM (09)
Output wavelength 1310nm/1550nm 1310nm/1550nm
Output power -7dBm/-7dBm -7dBm/-7dBm
Input sensitivity -26dBm/-30dBm -25dBm/-31dBm
System link budget 19dB1/21dB1 18dB/24dB
Fiber length (range)2 13km 47km
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels* Description Fiber type
9421DT(XX)/MMH-ST 2-channel digital video transmitter 1xMM
9421DR(XX)/MMH-ST 2-channel digital video receiver 1xMM
9421DT(XX)/SM-ST 2-channel digital video transmitter 1xSM
9421DR(XX)/SM-ST 2-channel digital video receiver 1xSM
9425DT(XX)/SM-ST Standalone version of the 9421D transmitter model 1xSM
9425DR(XX)/SM-ST Standalone version of the 9421D receiver model 1xSM*For user-definable Option Modules, replace (XX) in model number with code letters for desired Option Modules.
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9421D Series
Description
The TETRA 4000 combines video signal quality with ease of useover extremely long distances.
The multiplexer simultaneously transmits four camera signals overone fiber. Uncompressed 10-bit digitising, oversampling, anddigital filtering ensure a very high video channel transmissionperformance, exceeding the requirements of the EIA RS-250Cmedium-haul specifications.
The wide operating temperature range of these units makes theTETRA 4000 series well-suited for environmentally harshapplications such as traffic monitoring, video surveillance in citycenters, and airport security.
The TETRA 4000 comes in a single Eurocard cassette, suitable foran MC 10 or MC 11 power supply cabinet, or as a standaloneunit (/SA version). LED indicators provide an instant overview ofthe system status, including power and system faults.
TETRA 4000Four-channel digital video
Features
• 4-channel digital video multiplexer
• Uncompressed 10-bit digital video
• No signal degradation over long distances
• Adjustment-free operation
• Compact standalone and rack-mount versions
x4
VideoNumber of channels 4
Video format NTSC, PAL
Input/output level 1Vpp (±3dB)
Bandwidth (-3dB) 6MHz
Sampling resolution 10-bit
Video sampling rate 56MHz
Differential gain <2%
Differential phase <1°
Group delay <20ns
Signal-to-noise ratio >63dB (weighted)
Connector type BNC
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input or output (red)
Sync Operational link (green), local synchronization error (red)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >200,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
PoweringPower consumption <2.6W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 12 to 15VDC (PSA-UN12DC or PSR-12DC)
www.tkhsecurity.com
Technical SpecificationsTETRA 4000
MechanicalDimensions (h x w x d) 128 x 35 x 190mm (5.04 x 1.38 x 7.48in)
Weight 490g (16.56oz)
Housing Rack-mount or standalone
Optical
TETRA 4010TX/RX
TETRA 4050TX/RX
Fiber type 1xMM (62.5) 1xSM (9)
Output wavelength 1310nm 1310nm
System link budget 20dB at 1310nm 27.5dB at 1310nm
Link length 4km1 65km
Minimum link loss 0dBm 0dBm
Output power -4dBm2 -4dBm
Input sensitivity -24dBm -31.5dBm
Connector type ST (others optional) SC (others optional)1Due to fiber bandwidth, the maximum transmission distance may be limited
2For 50/125μm fiber, subtract 4dB.
Ordering informationModels Description Fiber type
TETRA 4010 TX 4-channel digital video multiplexer 1xMM
TETRA 4010 RX 4-channel digital video demultiplexer 1xMM
TETRA 4050 TX 4-channel digital video multiplexer 1xSM
TETRA 4050 RX 4-channel digital video demultiplexer 1xSM
TETRA40XX/SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.3 - Subject to modification.
Technical SpecificationsTETRA 4000
Description
The TETRA 4200, provides a compact and versatile combinationof video and data and can be deployed effectively in almost anyCCTV application.
The multiplexer simultaneously transmits four camera signals andone bidirectional data signal over one fibre. Uncompressed 10-bit digitising, oversampling, and digital filtering ensure a veryhigh video channel transmission performance, exceeding therequirements of the EIA RS-250C medium-haul specifications.
The bidirectional RS-485/422 data interface supports PTZ datafrom all types of camera interfaces including RS-485, TTY,Manchester, Bi-phase, and SensorNet
The wide operating temperature range of these units makes theTETRA 4200 series well-suited for environmentally harshapplications such as traffic monitoring, video surveillance in citycenters, and airport security.
The TETRA 4200 comes in a single Eurocard cassette, suitable foran MC 10 or MC 11 power supply cabinet, or as a standaloneunit (/SA version). LED indicators provide an instant overview ofthe system status, including power and system faults.
TETRA 4200Four-channel digital video, data
Features
• 4--channel digital video multiplexer with 2-way data
• Uncompressed 10-bit digital video
• 1x full-duplex data channel
• No signal degradation over long distances
• Adjustment-free operation
• Compact standalone and rack-mount versions
x4
x1
VideoNumber of channels 4
Video format NTSC, PAL
Input/output level 1Vpp (±3dB)
Bandwidth (-3db) 6MHz
Sampling resolution 10-bit
Video sampling rate 56MHz
Differential gain <2%
Differential phase <1°
Group delay <10ns
Signal-to-noise ratio 63dBw
Connector type BNC
DataNumber of channels 1 (full-duplex)
Data interfaces 1x RS-232, RS-422 or RS-485 (2- or 4-wire)
Data format Asynchronous, serial
Data rate DC to 256kbit/s
Sampling rate 3 Msamples/s
Connector type 5-pin screw terminal
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input or output (red)
Sync Operational link (green), local synchronization error (red)
www.tkhsecurity.com
Technical SpecificationsTETRA 4200
PoweringPower consumption <2.6W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 12 to 15VDC (PSA-UN12DC or PSR-12DC)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 35 x 190mm (5.04 x 1.38 x 7.48in)
Weight 490g (16.56oz)
Housing Rack-mount or standalone
Optical
TETRA 4210TX/RX
TETRA 4250TX/RX
Fiber type 1xMM (62.5) 1xSM (9)
Output wavelength 1310nm/1550nm 1310nm/1550nm
System link budget 18dB1 at 1310nm 21dB at 1310nm
Link length 4km2 57km
Minimum link loss 0dB 0dB
Output power -4dBm1/-7dBm1 -4dBm/-7dBm
Input sensitivity 22dBm/-22dBm -25dBm/-27dBm
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels Description Fiber type
TETRA 4210 TX 4-channel digital video multiplexer with 2-way data 1xMM
TETRA 4210 RX 4-channel digital video demultiplexer with 2-way data 1xMM
TETRA 4250 TX 4-channel digital video multiplexer with 2-way data 1xSM
TETRA 4250 RX 4-channel digital video demultiplexer with 2-way data 1xSM
TETRA 42XX/SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsTETRA 4200
Description
The , providing a compact and versatile combination of video,audio, data, contact closures, and Ethernet, can be deployedeffectively in almost any CCTV application.
The multiplexer simultaneously transmits four camera signals withtwo audio, four data, and two telemetry signals, and one10/100Base-TX Fast Ethernet interface over one single-mode ormulti-mode optical fiber. Uncompressed 10-bit digitising,oversampling, and digital filtering ensure a very high videochannel transmission performance, exceeding the requirementsof the EIA RS-250C medium-haul specifications.
The bidirectional RS-485/422 data interface supports PTZ datafrom all types of camera interfaces including RS-485, TTY,Manchester, Bi-phase, and SensorNet. In addition, the moduleoffers an isolated alarm contact closure output such as door andanti-tamper contacts.
In addition to data and audio, the TETRA 4300 offers a10/100Mb/s Fast Ethernet interface with Autonegotiation,Autosensing, and Auto-MDI/MDI-X for a fast, reliable connection.
The wide operating temperature range of these units makes theseries well-suited for environmentally harsh applications such astraffic monitoring, video surveillance in city centers, and airportsecurity.
The TETRA 4300 comes as a twin Eurocard cassette, suitable foran MC 10 or MC 11 power supply cabinet, or as a standaloneunit (/SA version). LED indicators provide an instant overview ofthe system’s status, including power, communication activity andsystem faults.
TETRA 4300Four-channel digital video, audio, data, CC, and Fast Ethernet
Features
• 4-channel digital video multiplexer with 2-way audio,data, contact closures and Fast Ethernet
• Uncompressed 10-bit digital video
• 1x 10/100Base-TX Fast Ethernet (IEEE 802.3)
• 4 full-duplex data channels
• 2 CD-quality, full-duplex audio channels
• 2 full-duplex contact closures
• No signal degradation over long distances
• Adjustment-free operation
• Compact standalone and rack-mount versions
Stereo
x4
x4
x2
x1
VideoVideo format NTSC, PAL
Input/output level 1Vpp (±3dB)
DC restore (clamping) On or off (selectable)
Bandwidth (-3dB) 6MHz
Sampling resolution 10-bit
Video sampling rate 27Msamples/s, 2x over-sampled
Differential gain <2%
Differential phase <1°
Group delay <33ns
Signal-to-noise ratio 63dBw
Connector type 75Ω BNC (gold-plated center pin)
DataNumber of channels 4 (full-duplex)
Data interfaces 2x RS-232, 2x RS-422/485 (2- or 4-wire)
Interface support Current loop, TTY, TTL, Manchester, Bi-phase
Data format Asynchronous, serial
Data rate DC to 1.5Mb/s
Sampling rate 15Msamples/s
Connector type RJ-45
Contact closuresNumber of channels 2 (full-duplex)
Input activation 0.5mA
Output Fail-safe, potential-free
Switch rating 2A at 30VDC
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsTETRA 4300
AudioNumber of channels 2 (full-duplex)
Bandwidth 20Hz to 20kHz
Sampling rate 16-bit
Input/output level 0dBV (+6dBV maximum)
Total harmonic distortion <0.25% at nominal level
Signal-to-noise ratio >75dBA
Input impedance 47kΩ or 600Ω balanced
Output impedance 47Ω balanced
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input or output (red)
Sync Full-duplex link (green), local (red) or remote synchronisation error (yellow)
D1/ D3 RS-4xx data activity on input (red/ green = 1/0)
D2/ D4 RS-232 data activity on input (green/ off = 1/0)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
PoweringPower consumption <12W (2A inrush)
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 16VDC (PSA-UN12DC or PSR-12DC)
MechanicalDimensions (h x w x d) 128 x 35 x 190mm (5.04 x 1.38 x 7.48in)
Weight 490g (16.56oz)
Housing Rack-mount or standalone
www.tkhsecurity.com
Technical SpecificationsTETRA 4300
Optical
TETRA 4310TX/RX
TETRA 4350TX/RX
TETRA 4350TX/RX ED
Fiber type 1xMM (62.5) 1xSM (9) 1xSM (9)
Output wavelength 1310nm/1550nm 1310nm/1550nm 1310nm/1550nm
System link budget >16dB at 1310nm >19dB at 1310nm 19dB at 1310nm
Link length 2km1 20km1 45km1
Minimum link loss 0dB 0dB 0dB
Output power -4dBm2/-8dBm -4dBm/-8dBm -4dBm/-8dBm
Input sensitivity -20dBm/-20dBm -23dBm/-24dBm -23dBm/-24dBm
Connector type SC SC (others optional) SC (others optional)1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels Description Fiber type
TETRA 4310 TX 4-channel digital video multiplexer, Two-way audio, data, CC, and FE 1xMM
TETRA 4310 RX 4-channel digital video demultiplexer, Two-way audio, data, CC, and FE 1xMM
TETRA 4350 TX 4-channel digital video multiplexer, Two-way audio, data, CC, and FE 1xSM
TETRA 4350 RX 4-channel digital video demultiplexer, Two-way audio, data, CC, and FE 1xSM
TETRA 4350 RX/ED 4-channel digital video demultiplexer, Two-way audio, data, CC, and FE, extended distance 1xSM
TETRA 43XX /SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsTETRA 4300
Description
The Optelecom® 9741D models digitise and transport four videosignals and three duplex data channels over one optical fibre.The use of 10-bit video sampling provides extremely high videoquality. The RS-232, user-configurable RS-422/RS-485Manchester 2-wire, and RS-485 2-wire ports add capability to thisbasic four-channel transport card.
The wide operating temperature range of these units makes the9741D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9741D series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9741D series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9741D rack-mount card,use the 9003-2 mini chassis.
9741D SeriesFour-channel video with three simplex data channels
Features
• 4-channel video and data transmitters and receivers
• Uncompressed 10-bit digital video
• Very high quality video ≥67dBw SNR
• 3 data channels, 1 user-configurable
• Rack-mount version
• Network Management System (NMS) compatible
VideoNumber of channels 4
Video format NTSC, PAL
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz (-3dB)
Sampling resolution 10-bit
Differential gain <2%
Differential phase <1˚
Signal-to-noise ratio ≥67dBw
Connector type ST
Group delay <7 ns
Video sampling rate 56MHz
DataNumber of channels 3 (simplex, in the video direction)
Data port
Connector type RJ-45
Data type (bit/sampling rate) 1-channel RS-232 (DC-115.2kbps/1.5MHz)1-channel RS-422, RS-485-2W, RS-485-4W, Manchester, switch selectable (DC-25Kbps/3MHz)
RS-485 port
Connector type RJ-12
Data type 1-channel RS-485-2W (DC to 256kbit/s/3MHz)
ManagementLED status indicators Full-duplex link (green), local (red) or remote synchronisation error (yellow)
Management system 9900 Network Management System (NMS) compatible
Power requirementsVoltage 5.7 to 6.4VDC
Power consumption
TX 550mA at 6VDC (3.3W)
RX 500mA at 6VDC (3W)
Rack-mount units 9002 or 9003-2 power supply chassis
www.tkhsecurity.com
Technical Specifications9741D Series
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825-1, IEC 60825-2, EN 55024, EN 50130-4, EN61000-6-2, EN 55022, FCC part 15
MechanicalHousing Rack-mount units
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (0.6lbs)
Optical
9741DT/DR-MMTX/RX
9741DT/DR-SMTX/RX
Fiber type 1xMM (62.5) 1xSM (09)
Output wavelength 1310nm/1550nm 1310nm/1550nm
Output power -4dBm/-7dBm -4dBm/-7dBm
Input sensitivity -30dBm/-22dBm -34dBm/-27dBm
System link budget 18dB at 1310nm 23dB at 1310nm
Fiber length (range)2 4km 57km
Minimum link loss 0dB 0dB
Connector type ST ST (others optional)1Due to fiber bandwidth, the maximum transmission distance may be limited to 4km.
Ordering InformationModels Description Fiber type
9741DT-LDL-ST 4-channel digital video transmitter with 2-way data 1xMM
9741DR-LDM-ST 4-channel digital video receiver with 2-way data 1xMM
9741DT-LD-ST 4-channel digital video transmitter with 2-way data 1xSM
9741DR-L-ST 4-channel digital video receiver with 2-way data 1xSM
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical Specifications9741D Series
Description
The Optelecom® 9341D series modules digitise and transportfour videos and one simplex High-Speed port over one opticalfiber in one direction. The High-Speed port supportstransmission of 1.5Mb/s RS-422 in the same direction as thevideo signals or connection to an optional Option Module hostcard for transport of four or eight additional audio, data, orcontact closure signals in the same direction as the video.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9341D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9341D series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9341D series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9341D rack-mount card,use the 9003-2 mini chassis.
9341D SeriesFour-channel video with simplex data
Features
• 4-channel video transmitters and receivers
• 9-bit uncompressed digital video
• High-quality video ≥63dBw SNR
• 1 simplex HS port
• Rack-mount version
• Network Management System (NMS) compatible
x4
VideoVideo format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 1.0%
Differential phase 0.7˚
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-bit linear PCM
Video sampling rate 1 MHz
High-speed portsNumber of ports 1x duplex
Data format RS-422 or extension port
Data rate
Synchronous RS-422 15Mb/s
Asynchronous RS-422 ≤1.5Mb/s
Extension port for:
Option module host 9961A-C, 9962A-C
10Mb Ethernet 9971-C, 9972-C
For more information on HS port capabilities, contact TKH Security Solutions.
ManagementManagement system 9900 Network Management System (NMS)
Powering9341DT
Current 750mA
Voltage 6VDC (chassis)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
www.tkhsecurity.com
Technical Specifications9341D Series
Mechanical9341DT
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (9.59oz)
9341DR
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (9.59oz)
Optical
9341DT-LDL/9341DR-LMTX/RX
9341DT-LD/9341DR-LTX/RX
Fiber type MM (62.5) SM (09)
Output wavelength 1310nm 1310nm
Output power -7dBm -7dBm
Input sensitivity -28dBm -29dBm
System link budget 21dB1 22dB1
Fiber length (range)2 5km 54km
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
Ordering informationModels Description Fiber type
9341DT-LDL-ST 4-channel digital video transmitter 1xMM
9341DR-LM-ST 4-channel digital video receiver 1xMM
9341DT-LD-S 4-channel digital video transmitter 1xSM
9341DR-L-ST 4-channel digital video receiver 1xSM
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9341D Series
Description
The Optelecom® 9131D models digitise and transport four videosignals and three data channels over one optical fibre in onedirection. The use of 10-bit video sampling provides extremelyhigh video quality. The RS-232, user-configurable RS-422/RS-485Manchester 2-wire, and RS-485 2-wire ports add additionalcapability to this basic four-channel transport card.
The wide operating temperature range of these units makes the9131D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9131D series comes as a rack-mount version only, suitablefor a 9002 or 9008 power supply cabinet. The 9131D seriesmodules are managed with the Optelecom NetworkManagement System (NMS).
To create a standalone version of the 9131D rack-mount card,use the 9003-2 mini chassis.
9701D SeriesFour-channel video with three simplex data channels
Features
• 4-channel video transmitters and receivers
• Uncompressed 10-bit digital video
• High quality video ≥67dBw SNR
• 3 simplex user-configurable data channels
• Rack-mount version
• Network Management System (NMS) compatible
x4
x3
Video (x4)Number of channels 4
Video format NTSC, PAL
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz (-3dB)
Sampling resolution 10-bit
Differential gain <2%
Differential phase <1˚
Signal-to-noise ratio ≥67dBw
Connector type ST
Group delay <20ns
Video sampling rate 56MHz
DataNumber of channels 3 (simplex, in the video direction)
Data port
Connector type RJ-45
Data type (bit/sampling rate) 1-channel RS-232 (DC-115.2kbps/1.5MHz)1-channel RS-422, RS-485-2W, RS-485-4W, Manchester, switch selectable (DC-25Kbps/3MHz)
RS-485 port
Connector type RJ-12
Data type 1-channel RS-485-2W (DC to 256kbit/s/3MHz)
Power requirementsVoltage 5.7 to 6.4VDC
Power consumption
TX 460mA at 6VDC (2.76W)
RX 420mA at 6VDC (2.52W)
Rack-mount units 9002 or 9003-2 power supply chassis
www.tkhsecurity.com
Technical Specifications9701D Series
ManagementLED status indicators Operational link (green), local synchronization error (red)
9701DT Sync, loop, not sync
9701DR 9231DR sync, loop, error, not CD
Management system 9900 Network Management System (NMS) compatible
MechanicalHousing Rack-mount units
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (0.6lbs)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825-1, IEC 60825-2, EN 55024, EN 50130-4, EN61000-6-2, EN 55022, FCC part 15
Optical
9701DT/DR-MMTX/RX
9701DT/DR-SMTX/RX
Fiber type 1xMM (62.5) 1xSM (09)
Output wavelength 1310nm/NA 1310nm/NA
Output power -4dBm/NA -11dBm/-11dBm
Input sensitivity NA/-24dBm NA/-30dBm
System link budget 20dB at 1310nm 26dB at 1310nm
Fiber length (range)2 4km 65km
Minimum link loss 0dB 0dB
Connector type ST ST (others optional)1Due to fiber bandwidth, the maximum transmission distance may be limited to 4km.
Ordering informationDescription Models Fiber type
9701DT-LDL-ST 4-channel digital video transmitter 1xMM
9701DR-LDM-ST 4-channel digital video receiver 1xMM
9701DT-LD-ST 4-channel digital video transmitter 1xSM
9701DR-L-ST 4-channel digital video receiver 1xSM
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9701D Series
Description
The Optelecom® 9762D video/data transceivers use one opticalfiber for simultaneous transmission of four unidirectional camerasignals, three simplex data signals and four duplex optionmodule signals. The use of 10-bit video sampling providesextremely high video quality over long distances.
Data channelsThere are three data channels, including one with a configurableinterface, that are suitable for RS-232/422/485/ Manchester PTZcontrol and other applications. The configurable duplex datainterface is suitable for RS-232/422/485 and Manchesteroperation for PTZ and other applications. In addition, four OptionModule channels are available to support additional duplexaudio/data, contact closures, and intercom links requirements viaplug-in option modules.
The wide operating temperature range of these units makes the9762D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9762D comes as a rack-mount version, suitable for a 9002power supply chassis. To create a standalone version of the9762D rack-mount card, use the 9003-2 mini chassis.
9762D SeriesFour-channel video with seven duplex data/option channels
Features
• 4-channel digital video multiplexer with data and High-Speed (HS) expansion ports
• Uncompressed 10-bit digital video
• Very high quality video ≥67dBw SNR
• No signal degradation over long distances
• 3 built-in duplex data channels
• 2 high-speed data audio expansion ports (1 simplex, 1duplex)
• Network Management System (NMS) compatible
x4
x3
x4
VideoNumber of channels 4
Video format NTSC, PAL
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz
Sampling resolution 10-bit
Video sampling rate 56MHz
Differential gain <2%
Differential phase <1˚
Signal-to-noise ratio ≥67dBw
Connector type ST
Group delay <7ns
DataNumber of channels 3 (simplex, in the video direction)
Data port
Connector type RJ-45
Data type (bit/ sampling rate) 1-channel RS-232 (DC-115.2kbps/ 1.5MHz)1-channel RS-422, RS-485-2W, RS-485-4W, Manchester, switch selectable(DC-256Kbps/ 3MHz)
RS-485 port
Connector type RJ-12
Data type 1-channel RS-485-2W (DC to 256kbit/s/ 3MHz)
Option Module
Number of channels 4 (full-duplex)
Data interfaces Data interface 1 x audio (A Module); 1 x user-configurable RS-232/422/485 (B-Module), 1 x contact closure (C Module),2x audio (D or E Module), 2x intercom audio (GM or GR Module).
For more information on data interfaces, refer to the data sheet of the 9961 and 9962.
www.tkhsecurity.com
Technical Specifications9762D Series
ManagementLED status indicators Full-duplex link (green), local (red) or remote synchronisation error (yellow)
Management system 9900 Network Management System (NMS) compatible
Power requirementsVoltage 5.7 to 6.4VDC
Power consumption
TX 875mA at 6VDC (5.25W)
RX 825mA at 6VDC (5W)
Rack-mount units 9002 or 9003-2 power supply chassis
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825-1, IEC 60825-2, EN 55024, EN 50130-4, EN61000-6-2, EN 55022, FCC part 15
MechanicalHousing Rack-mount units
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 362.9g (12.74oz)
Optical
9762DT/DR-MMTX/RX
9762DT/DR-SMTX/RX
Fiber type 1xMM (62.5) 1xSM (09)
Output wavelength 1310nm/1550nm 1310nm/1550nm
Output power -4dBm/-7dBm -4dBm/-7dBm
Input sensitivity -30dBm/-22dBm -34dBm/-27dBm
System link budget 15dB at 1310nm 20dB at 1310nm
System link budget(Tx to Rx) 18dB at 1310nm 23dB at 1310nm
Fiber length (range)2 4km 57km
Minimum link loss 0dB 0dB
Connector type ST ST (FC optional)1Due to fiber bandwidth, the maximum transmission distance may be limited to 4km.
www.tkhsecurity.com
Technical Specifications9762D Series
Ordering InformationModels Description Fiber type
9762DT(XXXX)/MMH-ST 4-channel digital video with data/option channels MM
9762DR(XXXX)/MMH-ST 4-channel digital video with data/option channels MM
9762DT(XXXX)/SM-ST 4-channel digital video with data/option channels SM
9762DR(XXXX)/SM-ST 4-channel digital video with data/option channels SM
9762DT(XXXX)/SMH-ST 4-channel digital video with data/option channels SM
9762DR(XXXX)/SMH-ST 4-channel digital video with data/option channels SM
* “XXXX” represents the identification letters for the four option modules, as selected by the user upon ordering.
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.2 - Subject to modification.
Technical Specifications9762D Series
Description
The Optelecom® 9442D models digitise and transport four videosignals, two duplex data channels, and a duplex High-Speed portover one optical fiber. One of two built-in duplex data ports is setfor RS-232 operation and the other is user-configurable asRS-232, RS-485 or RS-485 2-/4-wire, or Manchester encoding.The duplex High-Speed port makes it possible to add a customconfiguration of audio, data, contact closures, intercom, or evena Fast Ethernet-compatible 10Mb Ethernet channel to the samefiber as the video and built-in data.
Uncompressed 9-bit digitising, oversampling, and digital filteringensure a very high transmission performance, exceeding therequirements of the EIA RS-250C short haul specification.
The wide operating temperature range of these units makes the9442D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9442D series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9442D series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9442D rack-mount card,use the 9003-2 mini chassis.
9442D SeriesFour-channel video with three duplex data/HS port channels
Features
• 4-channel video transmitters and receivers
• 9-bit uncompressed digital video
• High-quality video ≥63dBw SNR
• 2 duplex user-configurable data channels
• 1 user-configurable duplex high-speed (HS) port
• Rack-mount version
• Network Management System (NMS) compatible
x4
x2
Video (x4)Video format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain 1.0%
Differential phase 0.7˚
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-bit linear PCM
Video sampling rate 15MHz
High-speed portsNumber of ports 1x duplex
Data format RS-422 or extension port
Data rate
Synchronous 15Mb/s
Asynchronous RS ≤1.5Mb/s
Extension port for:
Option module host 9961A-C, 9962A-C
10Mb Ethernet 9971-C, 9972-C
For more information on HS port capabilities, contact TKH Security Solutions.
Management9442DT Status, video present (x4)
9442DR Status, TX, video present (x4)
Management system 9900 Network Management System (NMS)
www.tkhsecurity.com
Technical Specifications9442D Series
Power requirements9442DT
Voltage 6VDC (chassis)
Current 800mA
9442DR
Voltage 6VDC (chassis)
Current 700mA
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9442DT
Housing 2-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 362.9g (12.80oz)
9442DR
Housing 2-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 362.9g (12.80oz)
Optical9442DT/DR-MMTX/RX
9442DT/DR-SMTX/RX
9442DT/DR-SMHTX/RX
Fiber type MM (62.5) SM (09) SM (09)
Output wavelength 1310nm/1550nm 1310nm/1550nm 1550nm/1310nm
Output power -7dBm/-7dBm -7dBm/-7dBm -3dBm/-3dBm
Input sensitivity -23 dBm/-30 dBm <-28 dBm/<-32 dBm <-27dBm/<-32dBm
System link budget 16dB1/23dB1 21dB/25dB 24dB/25dB
Fiber length (range)2 7km 51km 62km
Connector type ST (others optional) ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
Ordering informationModels Description Fiber type
9442DT/MMH-ST 4-channel video with 3 duplex data 1xMM
9442DR/MMH-ST 4-channel video with 3 duplex data 1xMM
9442DT/SM-ST 4-channel video with 3 duplex data 1xSM
9442DR/SM-ST 4-channel video with 3 duplex data 1xSM
9442DT/SMH-ST 4-channel video with 3 duplex data 1xSM
9442DR/SMH-ST 4-channel video with 3 duplex data 1xSM
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9442D Series
Description
The OCTA 4000 provides a compact solution for the transmissionof eight unidirectional independent composite video signals viaone multi-mode or one single-mode optical fiber. Uncompressed10-bit digitising, oversampling, and digital filtering ensure a veryhigh video channel transmission performance, exceeding therequirements of the EIA RS-250C medium haul specifications.
The wide operating temperature range of these units makes theOCTA 4000 series well-suited for environmentally harshapplications such as traffic monitoring, video surveillance in citycenters, and airport security.
The OCTA 4000 comes in a twin Eurocard cassette, suitable foran MC 10 or MC 11 power supply cabinet, or as a standaloneunit (/SA version). LED indicators provide an instant overview ofthe system status, including power and system faults.
OCTA 4000Eight-channel digital video
Features
• 8-channel digital video multiplexer
• Uncompressed 10-bit digital video
• No signal degradation over long distances
• Adjustment-free operation
• Compact standalone and rack-mount versions
x8
VideoNumber of channels 4
Video format NTSC, PAL
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz (-3dB)
Sampling resolution 10-bit
Video sampling rate 56MHz
Differential gain <2%
Differential phase <1°
Group delay <20ns
Signal-to-noise ratio >63dBw
Connector type BNC
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input or output (red)
Sync Full-duplex link (green), local (red) or remote synchronisation error (yellow)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
PoweringPower consumption <12W (2A inrush)
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 16VDC (PSA-UN12DC or PSR-12DC)
www.tkhsecurity.com
Technical SpecificationsOCTA 4000
MechanicalDimensions (h x w x d) 128 x 35 x 190mm (5.04 x 1.38 x 7.48in)
Weight 490g (16.56oz)
Housing Rack-mount or standalone
Optical
OCTA 4010TX/RX
OCTA 4050TX/RX
Fiber type 1xMM (62.5) 1xSM (9)
Output wavelength 1310nm 1310nm
System link budget >18dB at 1310nm >18dB at 1310nm
Link length 2km1 54km
Minimum link loss 0dBm 0dBm
Output power >4dBm2 >4dBm
Input sensitivity <-22dBm <-22dBm
Connector type ST (others optional) SC (others optional)1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels Description Fiber type
OCTA 4010 TX 8-channel digital video multiplexer 1xMM
OCTA 4010 RX 8-channel digital video demultiplexer 1xMM
OCTA 4050 TX 8-channel digital video multiplexer 1xSM
OCTA 4050 RX 8-channel digital video demultiplexer 1xSM
OCTA 40XX/SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsOCTA 4000
Description
The OCTA 4300 provides a compact and versatile combinationof video, audio, data, contacts, and Ethernet that can bedeployed effectively in almost any CCTV application. Themultiplexer simultaneously transmits eight camera signals withtwo audio, four data, and two telemetry signals, and one10/100Base-TX Fast Ethernet interface over one single-mode ormulti-mode optical fiber.
Uncompressed 10-bit digitising, oversampling, and digitalfiltering ensure a very high transmission performance, exceedingthe requirements of the EIA RS-250C short haul specification.
The bidirectional RS-485/422 data interface supports PTZ datafrom all types of camera interfaces including RS-485, TTY,Manchester, Bi-phase, and SensorNet. In addition, the moduleoffers an isolated alarm contact closure output such as doorcontacts, anti-tamper contacts, etc.
In addition to data and audio, the OCTA offers a 10/100MbpsFast Ethernet interface with autonegotiation, autosensing, andauto MDI/MDI-X for a fast, easy, and reliable connection.
The wide operating temperature range of these units makes theOCTA 4300 series well-suited for environmentally harshapplications such as traffic monitoring, video surveillance in citycenters, and airport security.
The OCTA 4300 comes as a twin Eurocard cassette, suitable foran MC 10 or MC 11 power supply cabinet, or as a standaloneunit (/SA version). LED indicators give an instant overview of thesystem’s status.
OCTA 4300Eight-channel digital video, audio, data, CC and Fast Ethernet
Features
• 8-channel digital video multiplexer
• 2-way audio, data, contacts and Fast Ethernet
• Uncompressed 10-bit digital video
• One 10/100Base-TX Fast Ethernet (IEEE 802.3)
• 4 full-duplex data channels
• 2 CD-quality full-duplex audio channels
• 2 full-duplex contact closures
• No signal degradation over long distances
• Adjustment-free operation
• Compact standalone and rack-mount versions
x8
x4
x2
x2
x1
VideoVideo format NTSC, PAL
Input/output level 1Vpp (±3dB)
DC restore (clamping) On or off (selectable)
Bandwidth (-3dB) 6MHz
Sampling resolution 10-bit
Video sampling rate 27Msamples/s, 2x over-sampled
Differential gain <2%
Differential phase <1°
Group delay <33ns
Signal-to-noise ratio 63dBw
Connector type 75Ω BNC (gold-plated center pin)
DataNumber of channels 4 (full-duplex)
Data interfaces 2x RS-232, 2x RS-422/485 (2- or 4-wire)
Interface support Current loop, TTY, TTL, Manchester, Bi-phase
Data format Asynchronous, serial
Data rate DC to 1.5Mb/s
Sampling rate 15Msamples/s
Connector type RJ-45
ContactNumber of channels 2 (full-duplex)
Input activation 0.5mA
Output Fail-safe, potential-free
Switch rating 2A at 30VDC
Connector type RJ-45
www.tkhsecurity.com
Technical SpecificationsOCTA 4300
AudioNumber of channels 2 (full-duplex)
Bandwidth 20Hz to 20kHz
Sampling rate 16-bit
Input/output level 0dBV (+6dBV maximum)
Total harmonic distortion <0.25% at nominal level
Signal-to-noise ratio >75dBA
Input impedance 47kΩ or 600Ω balanced
Output impedance 47Ω balanced
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input or output (red)
Sync Full-duplex link (green), local (red) or remote synchronisation error (yellow)
D1/D3 RS-4xx data activity on input
D2/D4 (Red/green = 1/0)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >250,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
PoweringPower consumption <12W (2A inrush)
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 16VDC (PSA-UN12DC or PSR-12DC)
MechanicalDimensions (h x w x d) 128 x 35 x 190mm (5.04 x 1.38 x 7.48in)
Weight 490g (16.56oz)
Housing Rack-mount or standalone
www.tkhsecurity.com
Technical SpecificationsOCTA 4300
Optical
OCTA 4310TX/RX
OCTA 4350TX/RX
OCTA 4350TX/RX ED
Fiber type 1xMM (62.5) 1xSM (09) 1xSM (09)
Output wavelength 1310nm/1550nm 1310nm/1550nm 1310nm/1550nm
System link budget >16dB at 1310nm >19dB at 1310nm 19dB at 1310nm
Link length 2km2 20km2 45km
Minimum link loss 0dB 0dB 0dB
Output power -4dBm3/-8dBm1 -4dBm/-8dBm -4dBm/-8dBm
Input sensitivity -20dBm -23dBm -23dBm
Connector type SC (others optional) SC (others optional) SC (others optional)1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
3 Due to dispersion at 1550nm.
Ordering informationModels Description Fiber type
OCTA 4310 TX 8-channel digital video multiplexer, Two-way audio, data, CC, and FE 1xMM
OCTA 4310 RX 8-channel digital video demultiplexer, Two-way audio, data, CC, and FE 1xMM
OCTA 4350 TX 8-channel digital video multiplexer, Two-way audio, data, CC, and FE 1xSM
OCTA 4350 RX 8-channel digital video demultiplexer, Two-way audio,data, CC, and FE 1xSM
OCTA 4350 RX/ED 8-channel digital video demultiplexer, Two-way audio, data, CC, and FE, extended distance 1xSM
OCTA 43XX /SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsOCTA 4300
Description
The Optelecom® 9752D video/data transceivers use one opticalfiber for simultaneous transmission of eight unidirectional camerasignals, three simplex data signals and two simplex high-speeddata signals. The use of 10-bit video sampling providesextremely high video quality over long distances.
Data channelsThe RS-232, user-configurable RS-422/RS-485 Manchester 2-wire,and RS-485 2-wire ports add capability to this basic four-channeltransport card. Two simplex high-speed data expansion channelsare available to support additional simplex audio, data andcontact closures.
The wide operating temperature range of these units makes the9752D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9752D series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9752D series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9752D rack-mount card,use the 9003-2 mini chassis.
9752D SeriesEight-channel video with five simplex data channels
Features
• 8-channel video and data transmitters and receivers
• Uncompressed 10-bit digital video
• Very high quality video ≥67dBw SNR
• 3 data channels, one user-configurable
• 2 simplex High-Speed audio/data expansion ports
• Rack-mount version
• Network Management System (NMS) compatible
x8
x2
VideoNumber of channels 8
Video format NTSC, PAL
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz (-3dB)
Sampling resolution 10-bit
Video sampling rate 56MHz
Differential gain <2%
Differential phase <1˚
Signal-to-noise ratio ≥67dBw
Connector type ST
Group delay <7ns
DataNumber of channels 3 (simplex, in the video direction)
Data port
Connector type RJ-45
Data type (Bit/ sampling rate) 1-channel RS-232 (DC-115.2kbps/1.5MHz)1-channel RS-422, RS-485-2W, RS-485-4W, Manchester, switch selectable(DC-256Kbps/ 3MHz)
RS-485 port
Connector type RJ-12
Data type 1-channel RS-485-2W (DC to 256kbit/s/ 3MHz)
High-speed port
Number of channels 2 (simplex)
Data interfaces Option module host (9961A-C or 9962A-C), most appropriate for simplex alarmsand audio
For more information on data interfaces, refer to the data sheet of the 9961 and 9962.
www.tkhsecurity.com
Technical Specifications9752D Series
ManagementLED status indicators Full-duplex link (green), local (red) or remote synchronisation error (yellow)
Management system 9900 Network Management System (NMS) compatible
Power requirementsVoltage 5.7 to 6.4VDC
Power consumption
TX 600mA at 6VDC (3.6W)
RX 550mA at 6VDC (3.3W)
Rack-mount units 9002 or 9003-2 power supply chassis
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825-1, IEC 60825-2, EN 55024, EN 50130-4, EN61000-6-2, EN 55022, FCC part 15
MechanicalHousing Rack-mount units
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 272g (0.6lbs)
Optical
9752DT/DR-MMTX/RX
9752DT/DR-SMTX/RX
Fiber type 1xMM (62.5) 1xSM (09)
Output wavelength 1310nm/NA 1310nm/NA
Output power -4dBm/NA -4dBm/NA
Input sensitivity NA/-22dBm NA/-26dBm
System link budget 18dB at 1310nm 22dB at 1310nm
Fiber length (range)2 2km 54km
Minimum link loss 0dB 0dB
Connector type ST ST (FC optional)1Due to fiber bandwidth, the maximum transmission distance may be limited to 4km.
Ordering InformationModels Description Fiber type
9752DT-LDL-ST 8-channel digital video transmitter with 1-way data/HS channels 1xMM
9752DR-LM-ST 8-channel digital video receiver with 1-way data/HS channels 1xMM
9752DT-LD-ST 8-channel digital video transmitter with 1-way data/HS channels 1xSM
9752DR-L-ST 8-channel digital video receiver with 1-way data/HS channels 1xSM
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9752D Series
Description
The Optelecom® 9782D video/data transceivers use one opticalfiber for simultaneous transmission of eight unidirectional camerasignals, three simplex data signals and two duplex high-speeddata signals. The use of 10-bit video sampling providesextremely high video quality over long distances.
Data channelsThe RS-232, user-configurable RS-422/RS-485 Manchester 2-wire,and RS-485 2-wire ports add capability to this basic four-channeltransport card. Two high-speed data expansion channels areavailable to support additional duplex audio/data contactclosures, intercom links (9961A/9962A) and even Ethernet(9971/9973-C) requirements.
The wide operating temperature range of these units makes the9782D series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9782D comes as a rack-mount version, suitable for a 9002power supply chassis. To create a standalone version of the9782D rack-mount card, use the 9003-2 mini chassis.
9782D SeriesEight-channel video with five duplex data channels
Features
• 4-channel digital video multiplexer with data and High-Speed (HS) expansion ports
• Uncompressed 10-bit digital video
• Very high quality video ≥67dBw SNR
• No signal degradation over long distances
• 3 built-in duplex data channels
• 2 high-speed data audio expansion ports (1 simplex, 1duplex)
• Network Management System (NMS) compatible
x8
x3
VideoNumber of channels 8
Video format NTSC, PAL
Input/output level 1Vpp (±3dB)
Bandwidth 6MHz
Sampling resolution 10-bit
Video sampling rate 56MHz
Differential gain <2%
Differential phase <1˚
Signal-to-noise ratio ≥67dBw
Connector type ST
Group delay <7ns
DataNumber of channels 3 (simplex, in the video direction)
Data port
Connector type RJ-45
Data type (Bit/ sampling rate) 1-channel RS-232 (DC-115.2kbps/1.5MHz)1-channel RS-422/ RS-485-2W/RS-485-4W/ Manchester, switch selectable(DC-256Kbps/3MHz)
RS-485 port
Connector type RJ-12
Data type 1-channel RS-485-2W (DC to 256kbit/s/3MHz)
High-speed port
Number of channels 2 (1 simplex, 1 duplex)
Compatible plug-in expansion Option module host (9961A-C or 9962A-C), cards 10Mb Ethernet (9971-C or9972-C)
For more information on data interfaces, refer to the data sheet of the 9961 and 9962.
www.tkhsecurity.com
Technical Specifications9782D Series
ManagementLED status indicators Operational link (green), local synchronization error (red), remote synchronization
error (yellow)
Management system 9900 Network Management System (NMS) compatible
Power requirementsVoltage 5.7 to 6.4VDC
Power consumption
TX 670mA at 6VDC (4W)
RX 620mA at 6VDC (3.7W)
Rack-mount units 9002 or 9003-2 power supply chassis
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825-1, IEC 60825-2, EN 55024, EN 50130-4, EN61000-6-2, EN 55022, FCC part 15
MechanicalHousing Rack-mount units
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 362.9g (12.74oz)
Optical
9782DT/DR-MMTX/RX
9782DT/DR-SMTX/RX
Fiber type 1xMM (62.5) 1xSM (09)
Output wavelength 1310nm/1550nm 1310nm/1550nm
Output power -4dBm/-7dBm -4dBm/-7dBm
Input sensitivity -26dBm/-19dBm -30dBm/-24dBm
System link budget 15dB at 1310nm 20dB at 1310nm
Fiber length (range)2 2km 48km
Minimum link loss 0dB 0dB
Connector type ST ST (FC optional)1Due to fiber bandwidth, the maximum transmission distance may be limited to 4km.
Ordering InformationModels Description Fiber type
9782DT/MM-ST 8-channel digital video transmitter with 2-way data/HS channel MM
9782DR/MM-ST 8-channel digital video receiver with 2-way data/HS channel MM
9782DT/SM-ST 8-channel digital video transmitter with 2-way data/HS channel SM
9782DR/SM-ST 8-channel digital video receiver with 2-way data/HS channel SM
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical Specifications9782D Series
Description
The Optelecom® SpectraStream™ combines Coarse WaveDivision Multiplexing (CWDM) fiber technology with Optelecomdigital video multiplexer/demultiplexer cards to transmit between4 and 128 channels of high-quality, real-time video signals(bidirectionally) over one optical fiber. The system is extremelyflexible, with the ability to add bidirectional data, audio, contactclosure, and 10Mbps, 100Mbps, or Gigabit Ethernet channels.
The SpectraStream™ system supports a broad range of data,audio, and contact closure options including 16-bit digital monoor stereo audio options, RS-232, RS-422, RS-485 data options,Ethernet, intercom, and contact closure options. These can besimplex or duplex and are configurable, ensuring a flexiblesystem even if system requirements change after installation.
It is possible to add up to 256 stereo audio channels operating inthe same direction as the video or 128 stereo audio and 128duplex data or contact closure channels. Adding the additionaldata and audio channels does not reduce the video resolution orchannel count.
Please contact TKH Security Solutions for additional assistance indesigning a system to meet your requirements.
SpectraStream™
Features
• SpectraStream™ systems transport combinations ofquality video, audio, and duplex data on one single-mode fiber using CWDM.
• Systems may be designed in point-to-point or in opticaladd/drop configurations.
• Field-proven digital video cards exceed RS-250CMedium Haul transmission specifications.
• Data, audio, contact closures, and Ethernet transport.
• High quality uncompressed digital video without latencyor artefacts.
www.tkhsecurity.com
Technical SpecificationsSpectraStream™
Video (per channel)Video format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain ≤0.7%
Differential phase ≤0.7˚
Signal-to-noise ratio ≥63dBw
Video encoding Uncompressed 9-/10-bit linear PCM
Video sampling rate 16MHz
Data portsData port Simplex RS-485/ RS-422, simplex RS-232
RS-485 Ports Simplex RS-485
High-speed port Simplex
www.tkhsecurity.com
Technical SpecificationsSpectraStream™
Option ModuleNumber of free channels 2 x duplex
A Module 1 x audio
B Module 1 x user-configurable data (RS-232, RS-422, RS-485)
C Module 1 x contact closure
D or E Module 2 x audio (simplex only)
GM or GR Module 2 x intercom audio
For more information on Option Modules, refer to the Option Modules data sheet or contact TKH Security Solutions.
OpticalOptical CWDM
ManagementManagement system 9900 Network Management System (NMS)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
PoweringPower requirements All systems operate from 100-240VAC 50/60Hz
9002 Chassis Dimensions — 19” rack-mount chassisDimensions (h x w x d) 177.8 x 442.6 x 203.2mm (7 x 17.4 x 8in)
Weight (empty) 2721.5g (6.0lbs)
CWDM — 1RU high 19” rack-mount chassisDimensions (h x w x d) 44.45 x 482.6 x 149.09mm (1.75 x 19.0 x 5.87in.)
Weight (empty) 907.18g (2.0lbs.)
Ordering InformationModels Description
SpectraStream™ Contact TKH Security Solutions for a system design
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsSpectraStream™
Description
These preconfigured, assembled, and tested Optelecom®
SpectraStream systems utilize CWDM techniques to transport upto 128 channels of uncompressed live video on one fiber. Bycombining CWDM versions of our standard 9152D and 9252D 8-channel multiplexer and demultiplexer cards with CWDM opticalcomponents, systems transporting 16, 32, 48, 96, and 128channels of video are available.
Option cards supporting additional data, audio, contact closurechannels, and 10 or 100Mb Ethernet on the same fiber areavailable.
The system can be monitored via serial port, SNMP or Ethernetusing the optional 9942A and 9900 NMS software package.
The wide operating temperature range of these units makes thisseries well-suited for environmentally harsh applications such astraffic monitoring, video surveillance in city centers, and federaland critical infrastructures.
If a more specialized system is required, contact TKH SecuritySolutions for assistance in designing a custom system.
SpectraStream™ and SpectraStreamPlus™
Features
• Preconfigured video transport systems for 1-fibertransmission of up to 128 channels
• Uncompressed 10-bit digital video
• Very high quality video ≥67dBw SNR
• Supports multiple duplex data channels and simplexdata in the same direction as the video
• Network Management System (NMS) compatible(optional)
Up to 128
Video (per channel)Video format NTSC, PAL
Video input 1Vpp into 75Ω
Connector type BNC
Bandwidth 5Hz to 6.5MHz (-3dB)
Differential gain ≤0.7%
Differential phase ≤0.7˚
Signal-to-noise ratio ≥67dBw
Video encoding Uncompressed 10-bit linear PCM
Video sampling rate 16MHz
Data Ports1, 2SpectraStream Data port Simplex RS-485/RS-422, simplex RS-232
SpectraStream RS-485 Ports Simplex RS-485
SpectraStream High-speed port Simplex
SpectraStreamPlus Data port Duplex RS-485/422
SpectraStreamPlus RS-485 Ports Duplex 2-wire
SpectraStreamPlus High-speed port Duplex/ simplex
Connector RJ-451 Simplex ports operate in the TX to RX direction.2 For details refer to the 9152D and 9252D Specification Sheets. Other data options are available; consult TKH Security Solutions fordetails.
MultiplexingMultiplexing CWDM
ManagementManagement system 9900 Network Management System (NMS)
PoweringPower requirements All systems operate from 100-240VAC 50/60Hz
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
www.tkhsecurity.com
Technical SpecificationsSpectraStream™ and SpectraStreamPlus™
Mechanical
Model/ System Size No. of 9002 Chassis TransmitEnd
No. of 9002 Chassis ReceiverEnd CWDM Unit
16 1 1 Built-in
32 1 1 Built-in
48 1 1 Built-in; 1RU for Plus
64 1 1 1RU
96 1 1 1RU
128 1 1 1RU
9002 Chassis Dimensions — 19” rack-mount chassisDimensions (h x w x d) 177.8 x 442.6 x 203.2mm (7 x 17.4 x 8in)
Weight (empty) 2721.5g (6.0lbs)
CWDM — 1RU high 19” rack-mount chassisDimensions (h x w x d) 44.45 x 482.6 x 149.09mm (1.75 x 19.0 x 5.87in.)
Weight (empty) 907.18g (2.0lbs.)
Optical
No. of Channels 16 32 48 64 96 128Fiber type SM (09) SM (09) SM (09) SM (09) SM (09) SM (09)
System link budget 18db 18db 18db 18db 18db 18db
Link length 42km 51km 51km 51km 15km 15km
Minimum link loss 0db 0db 0db 0db 0db 0db
Output power -5dBm -3dBm -3dBm -3dBm -3dBm -3dBm
Output wavelength 1310-1550nm 1510-1570nm 1510-1610nm 1470-1610nm 1310-1610nm 1310-1610 nm
Input sensitivity -23dBm -21dBm -21dBm -21dBm -21dBm -21dBm
Connector type FC/ST FC/ST FC/ST FC/ST FC/ST FC/ST
Ordering InformationModels Description Fiber type
SpectraStream-16-FC 16-channel video transmission system with simplex data 1xSM
SpectraStream-32-FC 32-channel video transmission system with simplex data 1xSM
SpectraStream-48-FC 48-channel video transmission system with simplex data 1xSM
SpectraStream-64-FC 64-channel video transmission system with simplex data 1xSM
SpectraStream-96-FC 96-channel video transmission system with simplex data 1xSM
SpectraStream-128-FC 128-channel video transmission system with simplex data 1xSM
SpectraStreamPlus-16-FC 16-channel video transmission system with duplex data 1xSM
SpectraStreamPlus-32-FC 32-channel video transmission system with duplex data 1xSM
SpectraStreamPlus-48-FC 48-channel video transmission system with duplex data 1xSM
SpectraStreamPlus-64-FC 64-channel video transmission system with duplex data 1xSM
SpectraStreamPlus-96-FC 96-channel video transmission system with duplex data 1xSM
SpectraStreamPlus-128-FC 128-channel video transmission system with duplex data 1xSM
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsSpectraStream™ and SpectraStreamPlus™
Description
The ADS 1200 series offers a range of fiber optic transceiverswith four data channels, two audio channels, and two contactclosures, all full-duplex, providing a solution for almost everyapplication.
The two audio channels offer broadcast quality, while the twocontact closure channels have potential-free outputs. Each datachannel is fully independent and offers transmission speeds fromDC to 64kb/s. Available data interfaces are RS-232, RS-422, 2 or4-wire RS-485, TTY, Manchester, and Biphase, providing forconnection to a wide range of cameras and control interfaces.
The rack-mounted ADS transceivers are available in one or two-fiber versions for both single-mode and multi-mode applications.The flexibility this provides allows configurations ranging fromsimple point-to-point links to dedicated drop-and-insert rings.
Rack-mountable ADS transceivers are designed to be slotted intoMC 10 or MC 11 power supply cabinets.
Standalone units (/SA version) are to be powered with a PSA-UN12DC.
The bidirectional RS-485/422 data interface supports PTZ datafrom all types of camera interfaces including RS-485, TTY,Manchester, Bi-phase, and SensorNet. In addition, the moduleoffers an isolated alarm contact closure output such as doorcontacts, anti-tamper contacts, etc.
The wide operating temperature range of these units makes theADS1200 series well-suited for environmentally harshapplications such as traffic monitoring, video surveillance in citycenters, and airport security.
ADS 1200Audio and data transceiver
Features
• Full-duplex RS-422/485, RS-232, and audio over one ortwo fibers
• Adjustment-free installation and operation
• Compact, modular design
x4
x2
x2
DataNumber of channels 4 full-duplex
Data interfaces 2x RS-232, 2x RS-422/485 (2- or 4-wire)
Interface support Current loop, TTY, TTL, Manchester, and Bi-phase
Data format Asynchronous, serial
Date rate per channel DC to 64kbit/s
Sample rate per channel 512ksamples/s
Connector type RJ-45
Contact ClosuresNumber of channels 2 full-duplex
Input activation 0.5mA
Output Fail-safe, potential-free
Switch rating 2A at 30VDC
Connector type RJ-45
AudioNumber of channels 2 full-duplex
Bandwidth 40Hz to 15kHz
Sampling rate 16-bit
Input/output level 0dBV (+6dBV maximum)
Total harmonic distortion <1% at nominal level
Signal-to-noise ratio >62dBA
Input impedance >50kΩ or 600Ω balanced
Output impedance <50Ω balanced
Connector type RJ-45
ManagementLED status indicators
DC Power-on indicator (green)
NV No video on input or output (red)
Sync Full-duplex link (green), local (red) or remote synchronisation error (yellow)
D1, D3 RS-4xx data activity on input (red/ green = 1/0)
D2, D4 RS-232 data activity on input (green/ off = 1/0)
Network management SNM™ compatible
SNM™ variables PS voltages, module temperature, module status, configuration, etc.
www.tkhsecurity.com
Technical SpecificationsADS 1200
PowerPower consumption <12W (2A inrush)
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 16VDC (PSA-UN12DC or PSR-12DC)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
MechanicalDimensions (h x w x d) 128 x 35 x 190mm (5 x 1.38 x 7.48in)
Housing Rack-mount or standalone
Weight 450g (15.87oz)
Optical
ADS 1200TRX
ADS 1210TRA/TRB
ADS 1240TRX
ADS 1250TRA/TRB
Fiber type 2xMM (62.5) 1xMM (62.5) 2xSM (09/125) SM (62.5/125)
Output wavelength 850nm 1850nm/1300nm 1310nm/1550nm 1310nm/1550nm
System link budget 19dB1 19dB1 at 850nm -7dBm/-7dBm -30dBm/30dBm
Link length 6km 6km 50km 50km
Minimum link loss 0dB 0dB 0dB 0dB
Output power -16dBm1 >-16dBm1/>-24dBm1 >-7dBm >-7dBm/>-7dBm
Input sensitivity -35dBm -35dBm/<-35dBm <-32dBm <-32dBm/<-32dBm
Connector type ST ST FC FC1For 50/125μm fiber, subtract 4dB.
Ordering InformationModels Description Fibre Type
ADS 1200 TRX Dual fiber audio/data multiplexer 2xMM
ADS 1210 TRA One fiber audio/data multiplexer, A-side 1xMM
ADS 1210 TRB One fiber audio/data multiplexer, B-side 1xMM
ADS 1240 TRX Dual fiber audio/data multiplexer 2xSM
ADS 1250 TRA One fiber audio/data multiplexer, A-side 1xSM
ADS 1250 TRB One fiber audio/data multiplexer, B-side 1xSM
ADS 12xx /SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsADS 1200
Description
CCM1010The CCM 1010 series transports eight telemetry contactsunidirectionally over one multi-mode optical fiber.
The CCM is monitored by status LEDs indicating the linkcondition and its internal synchronisation. The contact closuresare designed to be fail-safe; they will fall back to “open” in caseof data failure, connection loss, or power loss.
CCM1010 /RS-232The CCM 1010/RS-232 contact closure multiplexer system cantransmit eight independent contact closure signalsunidirectionally over an RS-232 data link.
The CCM is monitored by status LEDs indicating the linkcondition and its internal synchronisation. The contact closuresare designed to be fail-safe; they will fall back to “open” in caseof data failure, connection loss or power loss.
CCM 1010(/RS-232)8-channel Contact Closure Extension Module
Features
• Eight-channel Contact Closure Module
• Fail-safe
• Adjustment-free operation and installation
• Potential-free (output)
• Standalone and rack-mount versions
x8
Number of channels 8 (simplex)
Input +5V pull-up, 10kΩ
Threshold 4.3V (<1.5kΩ)
Output Fail-safe, potential-free
Switch rating 2A at 30VDC
Connector type D37
RS-232 InterfaceData format RS-232
Data frequency 1 start, 1 stop, no parity
Data rate 2.4 kb/s
Connector type D37
ManagementLED status indicators
DC Power-on indicator (green)
Sync RX only: link synchronised (green),link down (red)
FR TX only: correct transmission framing (green), internal failure (red)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
Power consumption 1.2W
Rack-mount units MC 10 and MC 11 power supply cabinets
Standalone units (/SA) 11 to 16VDC (PSA-UN12DC or PSR-12DC)
MechanicalDimensions (h x w x d) 128 x 35 x 190mm (5 x 1.38 x 7.48in)
Weight 450g (15.87oz)
Housing Rack-mount or standalone
www.tkhsecurity.com
Technical SpecificationsCCM 1010(/RS-232)
Optical
CCM 1010TX/RX
Fiber type 1xMM
Output wavelength 850nm
System link budget 28dB
Link length
Minimum link loss 0dBm
Output power >-17dBm1
Input sensitivity <-45dBm
Connector type ST1For 50/125μm fiber, subtract 4dB.
Ordering InformationModels Description Fiber type
CCM 1010 TX 8-channel contact closure transmitter 1xMM
CCM 1010 RX 8-channel contact closure receiver 1xMM
CCM 1010 TX/RS232 8-channel contact closure transmitter N/A
CCM 1010 RX/RS232 8-channel contact closure receiver N/A
CCM 1010 ......./SA Standalone version of rack-mount models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification..
Technical SpecificationsCCM 1010(/RS-232)
Description
MC 11 power supply cabinets can house and power 11 Siqurasingle-width rack-mount modules. The heart of the MC 11 is apowerful, efficient power supply unit, based on the latestswitched-mode techniques, which can supply up to 105 watts.
The MC 11’s built-in fans provide sufficient cooling for full-loadoperation over a wide temperature range. Additionally, theymake it possible to stack cabinets on top of each other and useevery inch of available rack space efficiently. All connections areconcentrated on one side. Reversible mounting brackets give youthe choice to have all connections at the front or at the back.
The MC 11 DC version is fitted with two DC inputs and twoidentical DC/DC conversion circuits to provide the highestavailability possible. A power failure on or off the inputs isindicated with an LED and a galvanic isolated contact.
The EB-2 option offers network management and is compatiblewith Siqura’s Smart Network Manager (SNM™). It provides statusinformation and control over system modules, including thepower supply cabinet itself. The EB-2 option also offers twoprogrammable alarm contacts. There are MC 11 models for230VAC, 115VAC, as well as options available for DC powersystems.
MC10, MC1119” power supply cabinet
Features
• Up to 11 slots
• Efficient, state-of-the-art switched-mode power supply
• Built-in dual fan
• Reversible mounting brackets
• Programmable contact closures
• Dual redundant power supply (MC 10 version)
• Management (SNM™) interface
• Field hardened
ElectricalNumber of slots
MC 11 (DC) 11 slots
MC 10 10 slots
Type of slot 7 TE Eurocassette
ManagementLED status indicators
DC Power-on indicator (green)
EB Data activity (SNM™) on external bus (Green)
Network management SNM™ compatible
SNM™ variables Voltages, modules, module temperature, Module status, optical levels, etc.
Number of SNM interfaces 2x 9-pin sub-D per cabinet
Interface format RS-485
Data rate 19.2kb/s
Programmable contacts 2 per cabinet
Switch rating 2A at 30VDC
EnvironmentalOperating temperature -40°C to +65°C (-40°F to +149°F) (See power derating graph above)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
www.tkhsecurity.com
Technical SpecificationsMC10, MC11
MechanicalMC10, MC11 Series
Dimensions (h x w x d) 132 x 483 x 240mm (5.2 x 19.02 x 9.45in), without cabling132 x 483 x 350mm (5.2 x 19.02 x 13.78in), with cabling
Weight 4.5kg (9.92lbs)
Powering MC 10/11AC-230 MC 10/11AC-115 MC 11DC
Mains Voltage 230VAC 115VAC 24VDC nominal
Operation Voltage - - 15 to 30VDC
Frequency 40-100Hz 40-100Hz -
Maximum drop-out time 10ms 10ms -
Primary fuse 1.6A/250V slow 3.16A/250V slow -
Power efficiency (full load) ~83% >83% >95%
DC Output power 83W (at 74°C ambient),105W (at 65°C ambient)
83W (at 74°C ambient)105W (at 65°C ambient)
83W maximum(at 74°C ambient)110W (at 65°C ambient)
DC Input current - - 5A at 24VDC or 8A at 15VDC
Ordering InformationModels* Description
MC 11 AC-230 Power supply cabinet, 19”/3 RU
MC 11 AC-115 Power supply cabinet, 19”/3 RU
MC 11 AC-230 /EB-2 Power supply cabinet with SNM™ management interface, 19”/3 RU
MC 11 AC-115 /EB-2 Power supply cabinet with SNM™ management interface, 19”/3 RU
MC 10 AC-230 /EB-2 Dual power supply cabinet with SNM™ management, 19”/3 RU
MC 10 AC-115 /EB-2 Dual power supply cabinet with SNM™ management, 19”/3 RU
MC 11 DC-24V Redundant DC power supply cabinet, 19”/3 RU
* UL rated for MC10 units only.
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsMC10, MC11
Description
The MT 03 Mounting Tray offers a cost-effective solution to fitSiqura’s stand-alone equipment, such as the compact UTF 4000TX-MSA series and the S-50 Video Server in 19” installations. Inaddition, it can hold a PSR-12 DC power supply unit for poweringstand-alone models.
The tray is fitted with threaded holes that fit perfectly with thestand-alone modules.
MT 0319” Mounting Tray
Features
• 19”, 1RU mounting tray for standalone modules
• Prepared for direct mounting of: 3x stand-alone Euro cassette models 6x UTF MSA models 6x matchbox models 1x PSR-12 DC power supply Reversible mounting brackets
• Low cost
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MTBF (mean time between failures) >100,000 hours
Safety and EMC IEC/EN 60950-1, IEC/EN 60825, IEC/EN 61000, EN 50130-4, EN 50081-1, EN55022, FCC part 15
Ordering InformationModels Description
MT 03 Mounting tray for standalone modules
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical SpecificationsMT 03
Description
These power supplies meet the requirements of Siqurastandalone units and the 9003-x series of mini chassis. All unitshave a power efficiency of greater than 50%. When using thesesupplies in extremely hot or cold locations, ensure that you selecta supply rated for operation in the temperature ranges required.Most power supplies have reduced capabilities in temperatureextremes.
Make sure you select a supply with the proper AC input voltagerange specifications for the locality in which it will be used.
Call the Systems Engineers at Siqura if you have any questionsabout which supply to use or for information on power suppliesfor legacy equipment.
9010, PSA, PSRStand-alone and mini chassis power supplies
Features
• External wall-pluggable AC to DC power supplies forstandalone units
• 9010PS in-line power supply for the 9003-2 mini chassis
• PSR-12 DC
• PSA-UN12DC
Electrical9010
Input voltage range 100- 240VAC 50/60Hz
Output voltage range 6VDC at 4A
Connector type 2.3 x 5.5mm female, barrel-type, center positive
Operating temperature 0°C to +45°C (+32°F to +113°F)
PSA-UN12DC with ferrules
Input voltage range 100- 240VAC 50/60Hz
Output voltage range 12VDC at 1.5A
Connector type Ferrules for screw connector
Operating temperature 0°C to +40°C (+32°F to +104°F)
PSA-UN12DC with Barrel Connector
Input voltage range 100- 240VAC 50/60Hz
Output voltage range 12VDC at 1.5A
Connector type 2.3 x 5.5mm female, barrel-type, center positive
Operating temperature 0°C to +40°C (+32°F to +104°F)
PSR-12DC
Input voltage range 85- 264VAC 50/60Hz
Output voltage range 12VDC at 1.5A25W (18W at 74°C) maximum
Connector type Spring Clamp Terminal
Operating temperature -10°C to +60°C (+14°F to +140°F) (74°C at 18W)
EnvironmentalStorage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MechanicalDimensions (h x w x d)
9010 44.45 x 63.5 x 114.3mm (1.75 x 2.5 x 4.5in)
PSR-12DC 76.2 x 44.45 x 99.5mm (3.0 x 1.75 x 3.92in)
PSA-UN12DC 35.3 x 43.5 x 74mm (1.4 x 1.7 x 2.9in)
Ordering InformationModels Description
9010 PS In-line, Switching
PSR-12DC DIN Rail mount, switching power supply
PSA-UN12DC with Barrel Connector Wall-Wart, switching power supply
PSA-UN12DC with ferrules Wall-Wart, switching power supply
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9010, PSA, PSR
Description
These Optelecom® miniature data modems transport an RS-232,RS-422, or RS-485 data signal on a pair of fibers. Available inmulti-mode and single-mode versions, they are packaged in a D-Sub connector-size package. These units can be mixed andmatched to provide both optical data transmission and data typeconversion with one link. All units operate on two fibers.
4132B, 4185AMiniature data modems
Features
• Miniature data fiber modems
• RS-232, RS-422, and RS-485 versions available
• Optically interchangeable for converting one data typeto another
• Optically compatible with most Optelecom® drop andinsert data modems
DataData type RS-232 TD and RD (3-wire), DC to 115.2kb/s, auto baud, pulse distortion ±1.3µs
maximum (16% at 128kb/s)
Data type RS-422 2- or 4-wire, DC to 128kb/s auto baud, pulse distortion ±1.3µs maximum (16% at128kb/s) input impedance 120Ω or 1.3kΩ switchable auto baud
Data type RS-485 2- or 4-wire, DC to 128kb/sauto baud, pulse distortion ±1.3µs maximum (16% at128kb/s) input impedance 120Ω or 1.3kΩ switchable
Power requirements4132B
Voltage +5.5 to +15VDC
Current 65mA at 12VDC
4185A
Voltage +8.0 to +15VDC
Current 35mA at 12VDC
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical4132B
Dimensions (h x w x d) 15.2 x 53.3 x 66mm (0.6 x2.1 x 2.6in)
Weight 90.7g (0.2lb)
4185A
Dimensions (h x w x d) 17.8 x 53.3 x 80mm (0.7 x 2.1 x3.15in)
Weight 90.7g (0.2lb)
www.tkhsecurity.com
Technical Specifications4132B, 4185A
Optical4132B-S 4132B-LD 4185A-S 4185A-LD
Fiber type MM (62.5) SM (09) MM (62.5) SM (09)
Output wavelength 850nm 1310nm 850nm 1310nm
Output power -19dBm -18dBm -19dBm -18dBm
Input sensitivity -41dBm -41dBm -41dBm -41dBm
System link budget 22dB1 23dB 22dB1 23dB
Fiber length (range)2 6km 57km 6km 57km
Connector type ST ST ST ST1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels Description Fiber type
4132B-S-ST RS-232 miniature data fiber modem 2xMM
4132B-LD-ST RS-232 miniature data fiber modem 2xSM
4185A-S-ST RS-422/485 miniature data fiber modem 2xMM
4185A-LD-ST RS-422/485 miniature data fiber modem 2xSM
PSA-UN12DC Wall-Wart, switching power supply
PSR-12DC DIN rail mounting, switching power supply
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications4132B, 4185A
Description
These Optelecom® drop and insert data modems support specialfeatures that make them extremely adaptable for many types ofsystems. Two fully independent, user-configurable data ports oneach modem support the operation of two devices on the samelogical data link. In addition, the data tagging feature preventsmasters from receiving data from other masters, local units fromreceiving data from other local units, and makes dual mastersystems possible. It also solves compatibility problems withsoftware. These units are optically compatible with the 4132Band 4185A mini and the 9521AY and 9525AY drop and insertmodems. They are available in multi-mode and single-modeoptical versions.
Two fully independent, user-programmable data portssupporting RS-232, RS-422, or RS-485 operation at up to115.2kb/s.
The wide operating temperature range of these units makes the9522A series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9522A series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9522A series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9522A rack-mount card,use the 9003-2 mini chassis.
9522A SeriesDual port drop and insert data modems
Features
• Drop/insert data communications systems
• Fault-tolerant ring operation
• 2 user-configurable data ports
• 1- and 2-fiber versions
• Data retiming for unlimited repeating
• Unique data tagging feature
• Standalone and rack-mount versions
• Network Management System (NMS) compatible
x2
Data interfacesPrimary data port
Type User-configurable RS-232, RS-422 or RS-485 2- or 4-wire
Data rates 150, 300, 600, 1.2k, 2.4k, 3.6k, 4.8k, 7.2k, 9.6k, 14.4k, 19.2k, 28.8 k, 38.4k, 57.6k,115.2k auto baud
Baud
Retiming accuracy 0.01% of pulse width
Connector DE25S (D type female, 9-pin)
Secondary data port Identical to the primary port (buffered)
ManagementLED status indicators
9522A Power, BERT, Fault-Pri, Fault-Sec, TX1/TD, RX1/RD, TX2/CTS, RX2/TDE, PR1/RDE, PR2/CTSE
9522AY Power, BERT, Fault-Pri, Fault-Sec, TX1/TD, RX1/RD, TX2/CTS, RX2/TDE, PR1/RDE, PR2/CTSE
Power requirements9522A
Voltage 6VDC (chassis)
Current 300mA
9522AY
Voltage 6VDC (chassis)
Current 300mA
9526A
Voltage 8-15VDC
Current 360mA at 12VDC
9526AY
Voltage 8-15VDC
Current 360mA at 12VDC
www.tkhsecurity.com
Technical Specifications9522A Series
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9526A
Housing Standalone chassis
Dimensions (h x w x d) 48.3 x 152.4 x 218.4mm (1.9 x 6.0 x 8.6in)
Weight 907.2g (32.0oz)
9526AY
Housing Standalone chassis
Dimensions (h x w x d) 48.3 x 152.4 x 218.4mm (1.9 x 6.0 x 8.6in)
Weight 907.2g (32.0oz)
9522A
Housing 2-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 680.4g (24.0oz)
9522AY
Housing 2-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 680.4g (24.0oz)
Optical
9522A-S 9522A-LD 9522AY-SMTX/RX
Fiber type MM (62.5) SM (09) SM (09)
Output wavelength 850nm 1310nm 850nm/1310nm
Output power -19dBm -18dBm -23dBm/-21dBm
Input sensitivity -41dBm -41dBm -37dBm/-35dBm
System link budget 22dB1 23dB 20dB/20dB
Fiber length (range)2 6km 57km 48km
Connector type ST (others optional) ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
Ordering informationModels Description Fiber type
9522A-S-ST Drop and insert data modem 2xMM
9522A-LD-ST Drop and insert data modem 2xSM
9522AY-SM-ST Drop and insert data modem 1xSM
9526A Standalone version of the 9522A models
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical Specifications9522A Series
Description
These Optelecom® drop and insert data modems support specialfeatures that make them extremely adaptable for many types ofsystems. In addition to the user-configurable data port, there is abuffered RS-232 port available for expanding to additional ringsor daisy chains.
One user-programmable data port supports RS-232, RS-422, orRS-485 operation at up to 115.2kb/s.
These units are also optically compatible with the 9522A seriesdrop and insert modems. They are available in multi-mode andsingle-mode optical versions.
The wide operating temperature range of these units makes the9525A series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
9525A SeriesDrop and insert data modems
Features
• Drop/insert data communications systems
• 1 user-configurable data port (RS-232/422/485)
• Fault-tolerant ring operation
• Separate RS-232 expansion port
• 1- and 2-fiber versions
• Data retiming for unlimited repeating
• Rack-mount version
ManagementLED status indicators
9525A Power, BERT, Fault-Pri, Fault-Sec, TX1/TD, RX1/RD, TX2/CTS, RX2/TDE, PR1/RDE, PR2/CTSE
9525AY Power, BERT, Fault-Pri, Fault-Sec, TX1/TD, RX1/RD, TX2/CTS, RX2/TDE, PR1/RDE, PR2/CTSE
Data interfacesPrimary data port
Type User-configurable RS-232, RS-422 or RS-485 2- or 4-wire
Data rates 150, 300, 600, 1.2k, 2.4k, 3.6k, 4.8k, 7.2k, 9.6k, 14.4k, 19.2k, 28.8 k, 38.4k, 57.6k,115.2k baud, auto ranging
Retiming accuracy 0.01% of pulse width
Connector DE25S (D type female, 9-pin)
Expansion data port
Type RS-232
Data rates 150, 300, 600, 1.2k, 2.4k, 3.6k, 4.8k, 7.2k, 9.6k, 14.4k, 19.2k, 28.8 k, 38.4k, 57.6k,115.2k baud, auto ranging
Retiming accuracy 0.01% of pulse width
Connector RJ-11
Power requirements9525A, 9525AY
Voltage 9 to 15VDC
Current 200mA at 12VDC
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
www.tkhsecurity.com
Technical Specifications9525A Series
Mechanical9525A, 9525AY
Housing Standalone chassis
Dimensions (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.2 x 5.0in)
Weight 453.6g (16.0oz)
Optical
9525A-S 9525A-LD 9525AY-SMTX/RX
Fiber type MM (62.5) SM (09) SM (09)
Output wavelength 850nm 1310nm 1310nm/1550nm
Output power -9dBm -18dBm -18dBm/-18dBm
Input sensitivity -41dBm -41dBm -38dBm/-38dBm
System link budget 22dB1 23dB 20dB/20dB
Fiber length (range)2 6km 57km 43km
Connector type ST (others optional) ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
Ordering informationModels Description Fiber type
9525A-S-ST Drop and insert data modem 2xMM
9525A-LD-ST Drop and insert data modem 2xSM
9525AY/SM-ST Drop and insert data modem 1xSM
PSA-UN12DC Wall-Wart, switching power supply
PSR-12DC DIN rail mounting, switching power supply
www.tkhsecurity.com
The quality management system used in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9525A Series
Description
These Optelecom® data modems transport eight channels ofRS-232 data signal on one or two fibers. They are available inmulti-mode and single-mode optical versions and rack-mount orstandalone packages. They operate at baud rates of up to115.2kb/s and can be configured as eight independent channelsor TX/TX and handshaking signals.
The wide operating temperature range of these units makes the9551 series well-suited for environmentally harsh applicationssuch as traffic monitoring, video surveillance in city centers, andfederal and critical infrastructures.
The 9551 series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9551 series modules are managed with the Optelecom® NetworkManagement System (NMS).
To create a standalone version of the 9551 rack-mount card, usethe 9003-2 mini chassis.
9551 SeriesEight-channel RS-232 data modems
Features
• 8-channel RS-232 optical modems
• Uses time multiplexing data transmission techniques
• Synchronous or asynchronous operation
• Sources standard DCE clock frequencies
• Standalone and rack-mount versions
• Network Management System (NMS) compatible
x8
Data interfacesData type RS-232 (x8)
Asynchronous rate DC to 115.2Kbps, auto baud
Synchronous data rates 1.2k, 2.4k, 3.6k, 4.8k, 7.2k, 9.6k, 14.4k, 19.2k, 28.8k, 38.4k, 57.6k, 76.8k, 115.2kbaud, dip switch selected
Sampling rate 920 kHz
Pulse width distortion <2.0% at 19.2k, 13% at 115.2k
Connector DB25S (female 25-pin)
ManagementLED status indicators
9551 Sync, not sync, loop, loopback
9555 Power, sync, loop, Received Data (x8)
Management system 9900 Network Management System (NMS)
Power requirements9551
Voltage 6VDC (chassis)
Current 500mA
9555
Voltage 8 to 14VDC
Current 360mA at 12VDC
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9551
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 226.9g (8.0oz)
9555
Housing Standalone chassis (size 5)
Dimensions (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.3 x 5.0in)
Weight 317.5g (11.19oz)
www.tkhsecurity.com
Technical Specifications9551 Series
Optical9551-S 9551-LD
Fiber type MM (62.5) SM (09)
Output wavelength 850nm 1310nm
Output power -16dBm -10dBm
Input sensitivity -35dBm -35dBm
System link budget 19dB1 25dB
Fiber length (range)2 5km 62km
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
Ordering informationModels Description Fiber type
9551-LD-ST 8-channel fiber data modem 2xSM
9551-S-ST 8-channel fiber data modem 2xMM
9555-ST Standalone version of the 9551 models
PSA-UN12DC Wall-Wart, switching power supply
PSR-12DC DIN rail mounting, switching power supply
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9551 Series
Description
The Optelecom® 9571Y series modems transport a standardPlain Old Telephone Signal (“POTS”) over one fiber. A pairconsists of a “P” end connected to the phone and an “L” endconnected to the line. A pair of “P” ends may be connectedtogether and used with standard telephones for a phone-to-phone intercom system.
Units are available in multi-mode and single-mode versions andrack-mount or standalone packages.
9571Y SeriesFiber optic telephone line extenders
Features
• Optical POTS telephone line extension
• Compatible with many telephone–type intercomsystems
• Phone-to-phone intercom system or line-to-phoneextension
• Standalone and rack-mount versions
• Network Management System (NMS) compatible
TELCO
Data interfacesTelephone line interface Standard U.S.
I/O impedance 600Ω
Connector RJ-11C
Power requirements9571Y
Voltage 6VDC (chassis)
Current 400mA
9575Y
Voltage 9 to 15VDC
Current 400mA at 12VDC
ManagementLED status indicators
9571Y Sync, not sync, loop, loopback
9575Y Sync, not sync, loop, loopback
Management system 9900 Network Management System (NMS)
EnvironmentalAll “P” phone end versions
Operating temperature -20°C to +74°C (-4°F to +165.2°F)
All “L” phone end versions
Operating temperature -40°C to +74°C (-40°F to +165°F)
All units
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9571Y
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 363g (12.80oz)
9575Y
Housing Standalone chassis (size 5)
Dimensions (h x w x d) 40.6 x 81.3 x 127.0mm (1.6 x 3.3 x 5.0in)
Weight 363g (12.80oz)
www.tkhsecurity.com
Technical Specifications9571Y Series
Optical
9571Y/9575Y-MMTX/RX
9575Y-SMTX/RX
Fiber type MM (62.5) SM (09)
Output wavelength 850nm/1310nm 850nm/1310nm
Output power -17dBm/-18dBm -11dBm/-11dBm
Input sensitivity -35dBm/-35dBm -35dBm/-35dBm
System link budget 18dB1/17dB1 24dB/24dB
Fiber length (range)2 5km 60km
Connector type ST ST1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
Ordering informationModels Description Fiber type
9571LY/MM-08T-ST Telephone line extender, line end 1xMM
9571PY/MM-13T-ST Telephone line extender, phone end 1xMM
9571L/SM-13T-ST Telephone line extender, line end 1xSM
9571PY/SM-15T-ST Telephone line extender, phone end 1xSM
9575 Standalone version of the 9571 models
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9571Y Series
Description
The Optelecom® 9591 data modem transports an RS-232,RS-422, RS-485, or Manchester PTZ data signal on a pair offibers. This model supports both optical data transmission anddata-type conversion in one unit. Front panel signal statusindicators, local, and optical loopback functions fortroubleshooting communications links are built in. The unitoperates on two fibers. It is optically compatible with the 4132Bor 4185A mini modems and the 9522A series drop and insertmodems.
The 9591 series comes as a rack-mount version only, suitable fora 9002 or 9008 power supply cabinet. The 9591 series modulesare managed with the Optelecom® Network ManagementSystem (NMS).
To create a standalone version of the 9591 rack-mount card, usethe 9003-2 mini chassis.
Units are available in multi-mode and single-mode versions.
9591 SeriesOne-channel data modem
Features
• Single-channel 2-fiber data modem
• User-configurable for RS-232, RS-422, RS-485 2-/4-wire,and Manchester PTZ
• Compatible with Optelecom data modems
• Rack-mount card
• Network Management System (NMS) compatible
Data interfacesType RS-232, RS-422, RS-485, or Manchester
Data rates DC to 128kb/s auto baud; Manchester 32kb/s
Connector type 5-pin removable screw terminal
ManagementManagement system 9900 Network Management System (NMS)
Power requirements9591
Voltage 6VDC (chassis)
Current 140mA
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MechanicalHousing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 226.8g (8.0oz)
Optical 9591-S 9591-LD
Fiber type MM (62.5) SM (09)
Output wavelength 850nm 1310nm
Output power -19dBm -18dBm
Input sensitivity -41dBm -41dBm
System link budget 22dB1 23dB
Fiber length (range)2 5km 57km
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
www.tkhsecurity.com
Technical Specifications9591 Series
Ordering informationModels Description Fiber type
9591-S-ST Single-channel 2-fiber data fiber modem 2xMM
9591-LD-ST Single-channel 2-fiber data fiber modem 2xSM
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9591 Series
Description
The Optelecom® 9672Y provides optical transport of eightduplex High-Speed (HS) ports. Each HS port may be used notonly as a high speed RS-422 port (1.5Mb/s), but also as a duplexexpansion port for Option Module host cards or 10Mb/sEthernet, thus offering unlimited flexibility.
The 9672Y series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9672Y series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9672Y rack-mount card,use the 9003-2 mini chassis.
9672Y Series8-channel High-Speed port cards
Features
• 8 duplex high-speed (HS) ports on one fiber
• 1.5 Mb/s RS-422 port
• Unrivalled flexibility
• Rack-mount version
• Network Management System (NMS) compatible
HSP>8x
Data interfacesNumber of ports 8
Data format RS-422 or extension port
Data rate
Synchronous RS-422 ≤15Mb/s
Asynchronous RS-422 ≤1.5Mb/s
Extension port for:
Option module host 9961A-C, 9962A-C
10Mb Ethernet 9971-C, 9972-C
For more information on HS port capabilities, contact TKH Security Solutions.
ManagementLED status indicators
9672Y Sync, not sync, loop
Management system 9900 Network Management System (NMS)
Power requirements9672Y
Voltage 6VDC (chassis)
Current 1.2A
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MechanicalHousing 2-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 680g (23.98oz)
www.tkhsecurity.com
Technical Specifications9672Y Series
Optical9672Y/MMH-13T/9672Y/MMH-15TTX/RX
9672Y/SM-13T9672Y/SM-15TTX/RX
9672Y/SMH-13T9672Y/SMH-15TTX/RX
Fiber type MM (62.5) SM (09) SM (09)
Output wavelength 1310nm/1550nm 1550nm/1310nm 1310nm/1550nm
Output power -7dBm/-7dBm -7dBm/-7dBm -6dBm/-6dBm
Input sensitivity 27dBm/-27dBm -28dBm/-28dBm -36dBm/-36dBm
System link budget 16dB1/16dB1 21dB/21dB 30dB/30dB
Fiber length (range)2 12km 20km 77km
Connector type ST (others optional) ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
Ordering informationModels Description Fiber type
9672Y/MMH-13T-ST 8-channel optical high-speed data port card, A-side 1xMM
9672Y/MMH-15T-ST 8-channel optical high-speed data port card, B-side 1xMM
9672Y/SM-13T-ST 8-channel optical high-speed data port card, A-side 1xSM
9672Y/SM-15T-ST 8-channel optical high-speed data port card, B-side 1xSM
9672Y/SMH-13T-ST 8-channel optical high-speed data port card, A-side 1xSM
9672Y/SMH-15T-ST 8-channel optical high-speed data port card, B-side 1xSM
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9672Y Series
Description
The Optelecom® 9771D series adds Ethernet transportcapabilities to fiber systems. With the addition of Ethernetdevices at remote locations, providing Ethernet transport on yourexisting system without installing new fiber, can reduce costssubstantially. The Y versions operate on one fiber using WDMtechniques.
The 9771D series comes as a rack-mount version, suitable for a9002 or 9008 power supply cabinet, or as a standalone unit. The9771D series modules are managed with the Optelecom®
Network Management System (NMS).
To create a standalone version of the 9771D rack-mount card,use the 9003-2 mini chassis.
9771 SeriesFast Ethernet media converter/switch
Features
• Transports a 10/100 Mb Ethernet signal over 1- or 2fibers
• Built-in 10/100Mb unmanaged 4-port Ethernet switch
• Rack-mount version
• Network Management System (NMS) compatible
x4
Power requirementsPowering
Voltage 6VDC (chassis)
Current 550mA
Electrical
Interface(s) 4x 10/100Base-TX, MDI/MDI-X, autocrossover, autopolarity, autosensing andautodetect
Connector type 4x RJ-45
Maximum distance 100m
PerformanceAddress table size 4k entries
Switching method Store-and-forward
ManagementLED status indicators
Fiber link CD, link active
Ethernet ports (x4) Full-duplex, link active
Management system 9900 Network Management System (NMS)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9771, 9771Y
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 362.9g (12.8oz)
www.tkhsecurity.com
Technical Specifications9771 Series
Optical
9771-LDTX/RX
9771/SM-15TTX/RX
Fiber type MM (62.5) SM (09)
Output wavelength CWDM/1310nm 1310nm/1550nm
Output power -7dBm/-7dBm -7dBm/-7dBm
Input sensitivity -34dBm/-34dBm <-28dBm/<-28dBm
System link budget 27dB1/27dB1 21dB/21dB
Fiber length (range)2 68km 20km
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2 Range may be limited by fiber bandwidth.
Ordering informationModels Description Fiber type
9771-LD-ST 2-fiber Ethernet transport 2xSM
9771Y/SM-13T-ST 1-fiber Ethernet transport, A-side 1xSM
9771Y/SM-15T-ST -fiber Ethernet transport, B-side 1xSM
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9771 Series
Description
These Optelecom® Option Module host cards provide opticaltransport for four or eight duplex option module channels andmake complex system configuration easy by supporting nearlyany combination of four or eight data, audio, contact closures, orintercom channels on one fiber.
The 9621/9622 series comes as a rack-mount version, suitable fora 9002 or 9008 power supply cabinet, or as a standalone unit.The 9621/9622 series modules are managed with theOptelecom® Network Management System (NMS).
To create a standalone version of the 9621/9622 rack-mountcard, use the 9003-2 mini chassis.
9621AY, 9622AY4-/8-channel optical duplex Option Module host cards
Features
• Transport 4 or 8 duplex option module channels on 1fiber
• Option Modules available for audio, data, contactclosure, and intercom applications
• Rack-mount version
• Network Management System (NMS) compatible
Up to 8x
Option modulesNumber of free channels
9621AY 4x duplex
9622AY 8x duplex
A Module 1x audio
B Module 1x user-configurable data
C Module (RS-232, RS-422, RS-485) 1 x contact closure
D or E Module 2x audio (simplex only)
GM or GR Module 2x intercom audio
For more information on Option Modules, refer to the Option Modules data sheet or contact TKH Security Solutions.
ManagementLED status indicators
9621AY Power, sync, not sync, loop
9622AY Power, sync, not sync, loop
Management system 9900 Network Management System (NMS)
Power requirements9621AY
Voltage 6VDC (chassis)
Current 400-800mA*
9622AY
Voltage 6VDC (chassis)
Current 800-1000mA*
* Current depends on the number and type of option modules installed.
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
www.tkhsecurity.com
Technical Specifications9621AY, 9622AY
Mechanical9621AY
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4 mm (6.1 x 0.8 x 8.6in)
Weight 227g (8.0oz)
9622AY
Housing 2-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 363g (12.8oz)
Optical9621AY-MM/9622AY-MMTX/RX
9621AY-SM/9622AY-SMTX/RX
Fiber type MM (62.5) SM (09)
Output wavelength 850nm/1310nm 1310nm/1550nm
Output power -16dBm1/-17dBm1 -7dBm/-7dBm
Input sensitivity -31dBm/-31dBm <-27dBm/<-24dBm
System link budget 15dB/14dB 25dB
Fiber length (range)2 4km 62km
Connector type ST (others optional) ST (others optional)1For 50/125μm fiber, subtract 4dB.
2Range may be limited by modal and chromatic dispersion, fibre quality, and fiber bandwidth.
Ordering informationModels Description Fiber type
9621AY(XXXX)/MM-08T-ST 4-channel option module host card, A-side 1xMM
9621AY(XXXX)/MM-13T-ST 4-channel option module host card, B-side 1xMM
9621AY(XXXX)/SM-13T-ST 4-channel option module host card, A-side 1xSM
9621AY(XXXX)/SM-15T-ST 4-channel option module host card, B-side 1xSM
9622AY(XXXXXXXX)/MM-08T-ST 8-channel option module host card, A-side 1xMM
9622AY(XXXXXXXX)/MM-13T-ST 8-channel option module host card, B-side 1xMM
9622AY(XXXXXXXX)/SM-13T-ST 8-channel option module host card, A-side 1xSM
9622AY(XXXXXXXX)/SM-15T-ST 8-channel option module host card, B-side 1xSM
Replace (XX) in model number with code letters for desired Option Modules. For more information on Option Modules, refer to theOption Modules data sheet or contact TKH Security Solutions.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9621AY, 9622AY
Description
The Optelecom® 9900 network management software packageincludes 9911-NMS serial management, 9941-NMS Ethernetmanagement, and 9900-SNMP support packages.
9941-NMS and 9911-NMS support an operator mode formonitoring only and a password-protected supervisor mode forconfiguration and setup. It supports system-level, chassis-level,and card-level status screens. Functions can be configured withup to three alarm levels.
An alarm log is created and saved for up to 30 days, recording allchanges in system status. An inventory log can be created listingthe model number, serial number, and location of every cardconnected to the system.
The 9900-SNMP software includes:Optelecom’s enterprise MIB files — These files can be used withoff-the-shelf SNMP management software. The MIB files containinformation associated with the Optelecom plug-in cards for theOptelecom® 9000 series chassis that is required for an SNMPmanagement package to communicate with the 9942Amanagement card via Ethernet.
Management Upgrade Utility (MUU) — An application thatcommunicates with the 9942A using a serial connection andallows for easy upgrade of Optelecom cards managed via SNMP.(All Optelecom® 9000 series cards manufactured prior to therelease of the 9942A software require this upgrade to operate inan SNMP environment.)
9900-NMS, 9942ANetwork Management
Features
• 9900-NMS FeaturesProvides graphical user interface for monitoring andmanaging Optelecom® 9000 series systemsSupports SNMP, serial mode, Ethernet mode, and web-based management
• 9942A featuresProvides system monitoring and management ofOptelecom® 9000 series transmission systemsOperates in four different configurations: web server,SNMP, Ethernet NMS, and serial managementRS-232 serial console port for manual set up and fieldfirmware upgrades
Hardware requirementsCPU minimum Intel Pentium 4, 2GHz
CPU recommended Intel Dual-Core Pentium 3GHz or better
Memory 1024MB RAM or more
Video card DirectX 9c compatible*
Supported operating systems Windows 2000/XP
LAN port 10/100/1000Base-TX
HD free space >50MB
SNMP V1 or V2c
MIB MIB II (RFC 1213)
*Dual monitor support recommended.
Management interfaces9942A Ethernet interface
Network port 10/100BaseT, full-duplex, half-duplex, autonegotiation, connector RJ-45,Supports static or dynamic addressing
Remote console functions (DHCP, BootP) via telnet
Management bus serial interface
Port 1 RS-485 2-wire duplex, 9600 baud (fixed), 2 RJ-11 connectors wired in parallel
Ports 2 and 3 RS-232 3-wire duplex, 9600 baud (fixed), 2 RJ-11 connectors
Console port RS-232 3-wire duplex, 38400 baud (fixed), RJ-11 connector
Management system 9900 Network Management System (NMS)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9942A
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 227g (8.0oz)
www.tkhsecurity.com
Technical Specifications9900-NMS, 9942A
Ordering informationModels Description
9900-NMS Software package for Network Management
9942A Network Management card
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9900-NMS, 9942A
Description
These Optelecom® option module host cards provide transportfor four or eight option module channels on an available high-speed port, usually on a video transport card. Using these hostcards, additional Option Module channels can be added to anysystem that has cards equipped with the high-speed ports.
Option modules are available for audio, data, contact closure,and intercom links. Option modules may be installed in nearlyany combination to suit the application. The cards will operate insimplex mode on simplex high-speed ports and in duplex modeon duplex high-speed ports.
For more information on Option Modules, refer to the OptionModules data sheet or contact TKH Security Solutions.
9961A-C, 9962A-C4 and 8-channel option module host card
Features
• Transports 4 or 8 option module channels over onehigh-speed port.
• Option Modules available for audio, data, contactclosure, and intercom applications.
• Option Modules may be installed in nearly anycombination and can be changed in the field.
• Rack-mount version.
• Network Management System (NMS) compatible.
x4, x8
Option modulesModel Number of free channels
9961A-C 4x duplex
9962A-C 8x duplex
A Module 1x audio
B Module 1x user-configurable data (RS-232, RS-422, RS-485)
C Module 1x contact closure
D or E Module 2x audio (simplex only)
GM or GR Module 2x intercom audio
For more information on Option Modules, refer to the Option Modules data sheet or contact TKH Security Solutions.
Management9961A-C Power, sync, not sync, loop
9962A-C Power, sync, not sync, loop
Management system 9900 Network Management System (NMS)
Power requirements9961A-C
Voltage 6VDC (chassis)
Current 300-800mA1
9962A-C
Voltage 6VDC (chassis)
Current 800-1100mA1
1 Depends on the number and type of option modules installed
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
www.tkhsecurity.com
Technical Specifications9961A-C, 9962A-C
Mechanical9961A-C
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 227g (8.0oz)
9962A-C
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 40.6 x 218.4mm (6.1 x 1.6 x 8.6in)
Weight 363g (12.8oz)
Ordering informationModels Description
9961A-C(XXXX)2 High-speed port expansion card for four Option Modules
9962A-C(XXXXXXXX)2 High-speed port expansion card for eight Option Modules
Replace (XX) in model number with code letters for desired Option Modules. For more information on Option Modules, refer to theOption Modules data sheet or contact TKH Security Solutions.
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9961A-C, 9962A-C
Description
A pair of Optelecom® 9971-C interface cards supports transportof a 10Mb Ethernet link on a duplex high-speed port. Many 9000series data and video transport cards offer duplex high-speedports supporting the 9971-C. The 9971-C can be added toSpectraStream CWDM systems when CWDM-compatible duplexhost cards are used in the system.
9971-C, 9973-CEthernet to High-Speed port card
Features
• Converts a 10Mb Ethernet signal to the high-speed portformat
• Adds 10Mb Ethernet connectivity between a pair offiber video or data transmission cards
• 1 duplex high-speed (HS) port available
• 2 user-configurable data port
• 9000 series rack-mount cards
• 9900 series Network Management System (NMS)compatible
Data interfacesHigh-speed port type Duplex 9000 series high-speed RS-422 Port
9971-C Ethernet port: type 10Base-T Ethernet, full-duplex/half-duplex, RJ-45 connector
9973-C Ethernet ports (x4): type 10/100Base-T Ethernet, full-duplex/half-duplex,autonegotiation, RJ-45 connector (x4)
9971-C only
Number of ports 2
Type User-programmable RS-232, RS-422 2- or 4-wire, or RS-485 2- or 4-wire, data rateDC to 128kb/s, auto baud
Input impedance RS-232 ≥3kW
RS-422/RS-485 120W or 12kW
Connector 2 x 5-pin removable screw terminal
ManagementLED status indicators
9971-C
High-speed port Loop
Ethernet port TX, RX, error, full-duplex, half-duplex
9973-C
Com link (high-speed port) Status
Ethernet ports port activity, link
Management system 9900 Network Management System (NMS)
Power requirements9971A-C
Voltage 6VDC (chassis)
Current 375mA
9973A-C
Voltage 6VDC (chassis)
Current 400mA
www.tkhsecurity.com
Technical Specifications9971-C, 9973-C
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Mechanical9971A-C
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 453g (16.0oz)
9973A-C
Housing 1-slot card, 9000 series chassis
Dimensions (h x w x d) 154.9 x 20.3 x 218.4mm (6.1 x 0.8 x 8.6in)
Weight 453g (16.0oz)
Ordering informationModels Description
9971-C 10Base-T to High-speed port interface card with two additional user-configurable data ports
9973-C 10Base-T to High-speed port interface card with built-in 10/100Mb 4-port Ethernet switch
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.1 - Subject to modification.
Technical Specifications9971-C, 9973-C
Description
The Optelecom® option module is a small, plug-in circuit cardmodule that offers the capacity to transport various signal typesover a fibre transmission link. The option module is only availablefor selected fibre optic transmitter and receiver models of the9000 series.
If the basic operation of the host link is unidirectional (simplex),the video and any additional signal transmission capabilitiesoperate only in the same direction as the video.
When the operation of the host link is bidirectional (duplex), theadditional signals operate in both directions on the fiber. Theoption modules come factory pre-installed and are speciallydesigned to provide maximum flexibility in virtually anycombination of audio, data, contact closures, or intercomchannels.
Refer to the data sheet of 9000 series models that support optionmodules for ordering information.
Option Modules
Features
• Unrivalled flexibility
• User definable service per Option Module channel:- Contact closure- Audio- Stereo audio- RS-422/485 and RS-232 data- Intercom (AiPhone)
Option Module Type ADuplex audio
Frequency response 20Hz to 20kHz
Input connections Balanced or unbalanced
Input impedance 600Ω or 47Ω, selectable
Input level 1 Vpp, nominal; 5.5Vpp, maximum
Output level Equivalent to input level
Output connections Balanced or unbalanced, selectable
Signal-to-noise ratio >78dBw
Option Module Type BDuplex data
Data input types RS-232, RS-422/485
Data rate DC to 115kbps (RS-422/485 and RS-232); 32kbps (Manchester)
Option Module Type CDuplex contact closure
Input current 6mA (maximum); 0.6mA (minimum)
Maximum isolation voltage 50VDC
Output contact rating 300mA at 30VDC
Option Module Types D and ESimplex stereo audio
Frequency response 20Hz to 20kHz
Input connections Balanced or unbalanced
Input impedance 600Ω or 47Ω, selectable
Input level 1 Vpp, nominal; 5.5Vpp, maximum
Output level Equivalent to input level
Output connections Balanced or unbalanced, selectable
Signal-to-noise ratio >78dBw
Option Module Types GM & GRIntercom
Frequency response 200Hz to 3.7kHz
Input connections Twisted pair from AiPhone LEM master, and LE series remotes
Power remote end 2.0A (signaling); 350mA (normal)
Power master end 350mA (normal)
Contact closure
Input current 6mA (maximum); 0.6mA (minimum)
Maximum isolation voltage 50VDC
Output contact rating 300mA at 30VDC
www.tkhsecurity.com
Technical SpecificationsOption Modules
Ordering informationModels Description
Option Module A Audio module
Option Module B Data module
Option Module C Contact closure mudule
Option Module D Simplex stereo audio input module
Option Module E Simplex stereo audio output module
Option Module GM Aiphone intercom module, master end
Option Module GR Aiphone intercom module, remote end
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical SpecificationsOption Modules
Description
9002 21-slot 19" rack-mount chassisThe Model 9002 19" 4 RU chassis is designed for rack mountingOptelecom® Series 9000 cards. All electrical and opticalconnections are made to the front panels of the plug-in cards.Individual cards can be hot swapped without affecting theoperation of other cards in the chassis. The rack mounting earsmay be installed on the front or rear of the chassis as required forthe specific application.
The 9002 may be equipped with one or two power supplies. Youcan set these supplies to operate as load-sharing or as primaryand backup supplies. 18 slots are available for use with onesupply installed; 15 are available with two supplies installed. Thechassis supports the Network Management System.
9050BF rack-mount power supplyThese 6.0VDC power supplies are intended to meet therequirements of Optelecom Series 9000 chassis rack mount units.The supplies may be operated as a single supply or, when twosupplies are installed, primary/backup mode or load-sharingmode. Adjustments are made simple by a set of front panelmeter test points for output voltage, current, and temperatureand a voltage adjustment control.
For noise immunity and proper ventilation, instal blank panelsover unused slots. See the accessories chart in OrderingInformation below. Power supplies are ordered separately; theversion of supply required depends on the number of cardsinstalled and their total power consumption. Refer to the UserManual and system applications notes available from the factoryfor details on installing the 9002 chassis.
9002, 9050BF19“ Rack-mount chassis with power supply
Features
• Rack-mountable chassis supports Optelecom® 9000series rack-mount cards
• Supports up to 21 slots
• 3-slot, heavy duty, fan-cooled pluggable power supplymodule
• Front panel jacks for monitoring output voltage, current,and temperature
• 9900 Network Management System (NMS)
Powering requirementsInput voltage range 100-240VAC, 50/60Hz
Output voltage 6.1VDC
Maximum current 24A at -40°C to +50°C (-40°F to +122°F)
Maximum current derated 13.5A at -40°C to +65°C (-40°F to +149°F)
Number of fans 1
Mechanical9002
Number of slots 21
Measurements overall 19"; 4RU
Dimensions (h x w x d) 177.8 x 442.6 x 203.2mm (7 x 19 x 8in)
Weight 2.72kg (6lbs)
9050BF
Number of slots 3
Measurements overall 19"; 4RU
Dimensions (h x w x d) 154.9 x 60.9 x 218.4mm (6.1 x 2.4 x 8.6in)
Weight 1.45kg (3.2lbs)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Ordering informationModels Description
9002 21-slot 19" rack-mount chassis (without power supply unit, 9050BF)
9050BF 3-slot power supply unit for use with the 9002 chassis
9996 1 single blank panel (1-slot cover plate)
9998 1 triple blank panel (3-slot cover plate)
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9002, 9050BF
Description
The Optelecom® 9003-2 chassis is a compact rugged enclosurefor standalone applications of 9000 series rack-mount models.Four mounting holes are provided for attaching to vertical flatsurfaces.
The chassis is powered by the model 9010 external powersupply.
90039000 series mini chassis
Features
• 2-slot mini chassis for Optelecom® 9000 series rack-mount cards
• Uses 9010 external power supplies
• Converts rack-mount cards to standalone units
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
MechanicalDimensions (h x w x d) 180.34 x 44.42 x 217.37mm (7.1 x 1.749 x 8.558in)
Weight 535g (18.8oz)
Power input connectors 2.5 x 5.5mm male barrel-type, center position, 6VDC
Ordering informationModels Description
9003-2 2-slot mini chassis for standalone housing of 9000 series rack-mount cards
9996 Single plank panel (1-slot cover plate)
www.tkhsecurity.com
The quality management system useded in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9003
Description
The Optelecom® 9008 19” 2 RU chassis is designed for rackmounting Optelecom 9000 series cards. All electrical and opticalconnections are made to the front panels of the plug-in cards.Individual cards can be hot swapped without affecting theoperation of other cards in the chassis. The rack mounting earsmay be installed on the front or rear of the chassis as required forthe specific application.
The 9008 is equipped with a built-in power supply, so no slotsare taken by supplies.
The 9008 has a built-in fan system so that the horizontallyinstalled cards have sufficient airflow for cooling. The chassissupports the Optelecom Network Management System (NMS).
Three LEDs provide basic system status: a power LED, amanagement network LED to indicate chassis communicationactivity, and a system LED that illuminates when any card in thesystem has a serious fault. Instal blank panels to cover unusedslots for noise immunity and proper ventilation.
90089000 series cabinet
Features
• Rack-mountable cabinet supports Optelecom® 9000series products
• Built-in power supply
• 19", 2 RU
• Supports a total of eight slots
• Fans for cooling
ElectricalInput voltage range (AC) 100- 240VAC 50/60Hz
Output voltage range (DC) 6.1VDC (nominal)
Maximum current 14A at -40°C to +50°C (-40°F to +122°F)
MechanicalDimensions (h x w x d) 88.9 x 442.6 x 304.8mm (3.5 x 19.0 x 12.0in)
Weight 2.6kg (5.7lbs)
EnvironmentalOperating temperature -40°C to +74°C (-40°F to +165°F)
Storage temperature -55°C to +85°C (-67°F to +185°F)
Relative humidity <95% with no condensation
Ordering informationModels Description
9008 8-slot 2 RU 19" rack-mount power supply cabinet
9996* Single blank panel (1-slot cover plate)
9998* Triple blank panel (3-slot cover plate)
* All empty slots should have 9996 or 9998 blank panels installed to protect the installed cards and to maintain proper air flow.
www.tkhsecurity.com
The quality management system utilized in the development, production, sales, and support ofthis product is ISO 9001:2008 certified by LRQA.
© Siqura B.V. - January 2013 Version 1.0 - Subject to modification.
Technical Specifications9008
Model Page4132B, 4185A 475
4132B-LD-ST 475
4132B-S-ST 475
4185A-LD-ST 475
4185A-S-ST 475
9002 527
9002, 9050BF 527
9003 529
9003-2 529
9008 531
9010 PS 473
9010, PSA, PSR 473
9050BF 527
9111D Series 371
9111DRRR-L-ST 371
9111DT-LD-ST 371
9111DT-L-ST 371
9111DTTT-LD-ST 371
9111DTTT-L-ST 371
9113DT-LD-ST 371
9114DR-LM-ST 371
9114DR-L-ST 371
9191D Series 391
9191DR-L-ST 391
9191DR-S-ST 391
9191DT-LDS-ST 391
9191DT-LD-ST 391
9221D Series 379
9221DR/MMH-ST 379
9221DR/SM-ST 379
9221DT/MMH-ST 379
9221DT/SM-ST 379
9225DR/MMH-ST 379
9225DR/SM-ST 379
9225DT/MMH-ST 379
9225DT/SM-ST 379
9229DT-P/MMH-ST 379
9229DT-P/SM-ST 379
9241D Series 387
9241DR(XX)/MMH-ST 387
9241DR(XX)/SM-ST 387
9241DT(XX)/MMH-ST 387
9241DT(XX)/SM-ST 387
9245DR 387
9245DT 387
Model Page9281D Series 383
9281DR/MMH-ST 383
9281DR/SM-ST 383
9281DT/MMH-ST 383
9281DT-EX/SM-ST 383
9285DR/XX-ST 383
9285DT/XX-ST 383
9292D Series 395
9292DR(XX)/MMH-ST 395
9292DR(XX)/SMH-ST 395
9292DR(XX)/SM-ST 395
9292DT(XX)/MMH-ST 395
9292DT(XX)/SMH-ST 395
9292DT(XX)/SM-ST 395
9341D Series 419
9341DR-LM-ST 419
9341DR-L-ST 419
9341DT-LDL-ST 419
9341DT-LD-S 419
9421D Series 399
9421DR(XX)/MMH-ST 399
9421DR(XX)/SM-ST 399
9421DT(XX)/MMH-ST 399
9421DT(XX)/SM-ST 399
9425DR(XX)/SM-ST 399
9425DT(XX)/SM-ST 399
9442D Series 431
9442DR/MMH-ST 431
9442DR/SMH-ST 431
9442DR/SM-ST 431
9442DT/MMH-ST 431
9442DT/SMH-ST 431
9442DT/SM-ST 431
9522A Series 479
9522A-LD-ST 479
9522A-S-ST 479
9522AY-SM-ST 479
9525A Series 483
9525A-LD-ST 483
9525A-S-ST 483
9525AY/SM-ST 483
9526A 479
9551 Series 487
9551-LD-ST 487
9551-S-ST 487
www.tkhsecurity.com
Index
Model Page9555-ST 487
9571L/SM-13T-ST 491
9571LY/MM-08T-ST 491
9571PY/MM-13T-ST 491
9571PY/SM-15T-ST 491
9571Y Series 491
9575 491
9591 Series 495
9591-LD-ST 495
9591-S-ST 495
9621AY(XXXX)/MM-08T-ST 507
9621AY(XXXX)/MM-13T-ST 507
9621AY(XXXX)/SM-13T-ST 507
9621AY(XXXX)/SM-15T-ST 507
9621AY, 9622AY 507
9622AY(XXXXXXXX)/MM-08T-ST 507
9622AY(XXXXXXXX)/MM-13T-ST 507
9622AY(XXXXXXXX)/SM-13T-ST 507
9622AY(XXXXXXXX)/SM-15T-ST 507
9672Y Series 499
9672Y/MMH-13T-ST 499
9672Y/MMH-15T-ST 499
9672Y/SM-13T-ST 499
9672Y/SM-15T-ST 499
9672Y/SMH-13T-ST 499
9672Y/SMH-15T-ST 499
9701D Series 423
9701DR-LDM-ST 423
9701DR-L-ST 423
9701DT-LDL-ST 423
9701DT-LD-ST 423
9711D Series 375
9711DR-LM-ST 375
9711DR-L-ST 375
9711DT-LD-ST 375
9711DT-L-ST 375
9715DR-L-ST 375
9715DT-LD-ST 375
9741D Series 415
9741DR-LDM-ST 415
9741DR-L-ST 415
9741DT-LDL-ST 415
9741DT-LD-ST 415
9752D Series 443
9752DR-LM-ST 443
Model Page9752DR-L-ST 443
9752DT-LDL-ST 443
9752DT-LD-ST 443
9762D Series 427
9762DR(XXXX)/MMH-ST 427
9762DR(XXXX)/SMH-ST 427
9762DR(XXXX)/SM-ST 427
9762DT(XXXX)/MMH-ST 427
9762DT(XXXX)/SMH-ST 427
9762DT(XXXX)/SM-ST 427
9771 Series 503
9771-LD-ST 503
9771Y/SM-13T-ST 503
9771Y/SM-15T-ST 503
9782D Series 447
9782DR/MM-ST 447
9782DR/SM-ST 447
9782DT/MM-ST 447
9782DT/SM-ST 447
9900-NMS 511
9900-NMS, 9942A 511
9942A 511
9961A-C(XXXX)2 515
9961A-C, 9962A-C 515
9962A-C(XXXXXXXX)2 515
9971-C 519
9971-C, 9973-C 519
9973-C 519
9996 527
9998 527
A-80 231
A-80 SFP 231
A-80...../SA 231
ADS 1200 459
ADS 1200 TRX 459
ADS 1210 TRA 459
ADS 1210 TRB 459
ADS 1240 TRX 459
ADS 1250 TRA 459
ADS 1250 TRB 459
ADS 12xx /SA 459
AlphaTool 253
AlphaTool management software package 253
AlphaVision AlphaCom XL 255
AlphaVision AlphaCom XL IP + GPRS board 255
www.tkhsecurity.com
Index
Model PageAlphaVision AlphaCom XL IP board 255
AlphaVision DL-600 PSTN Dialer 257
AlphaVision DL-600 PSTN Dialer board 257
AlphaVision DL-600 PSTN Dialer board in casing 257
AlphaVision DL-600 PSTN Dialer board withpower supply and battery pack in casing 257
AlphaVision DLM-600 GSM/GPRS Dialer 261
AlphaVision DLM-600 GSM/GPRS Dialer incasing 261
AlphaVision DLM-600 GSM/GPRS Dialer withpower supply and battery pack in casing 261
AlphaVision Input + 8 OC Expansion Module 265
AlphaVision Input + 8 OC Expansion Module inmetal casing 265
AlphaVision ML 267
AlphaVision ML DSP Speech Board 271
AlphaVision ML GSM/GPRS Dialer 273
AlphaVision ML speech plug-on board 271
AlphaVision ML Wireless Expansion Module 275
AlphaVision ML AlphaVision ML Control Panelwith LCD keypad in metal casing 267
AlphaVision ML AlphaVision ML Control Panelwith LCD keypad in plastic casing 267
AlphaVision ML AlphaVision ML Control Panelwith LCD or LCD proximity keypad in plasticcasing
267
AlphaVision ML AlphaVision ML Control Panelwith LCD proximity keypad in metal casing 267
AlphaVision ML/XL LCD keypad 277
AlphaVision ML/XL LCD Proximity Keypad 277
AlphaVision ML/XL LCD proximity keypadincluded with two proximity tags 277
AlphaVision ML/XL PSTN Dialer 279
AlphaVision ML/XL PSTN Dialer 279
AlphaVision Proximity Reader 281
AlphaVision PSTN-2-IP ML 283
AlphaVision Relay Output Module 285
AlphaVision RO module 281
AlphaVision XL 287
AlphaVision XL Communication Board 291
AlphaVision XL Control Panel with LCD keypad 287
AlphaVision XL Control Panel with LCDproximity keypad 287
AlphaVision XL plug-on communication boardfor 1 bus 291
AlphaVision XL Wireless Expansion Module 293
BC14WDR 11
BC620WDR 15
Model PageBC620WDR /SFP 15
BC620WDR-AID 21
BC620WDR-AID /SFP 21
BC620WDR-TDC 21
BC620WDR-TDC /SFP 21
BC820 27
BC820H1 31
BL820M1IR 35
Box Camera Housings and Accessories 153
C-50 E-MC 211
C-50 E-MC..../SA 211
C-50 E-MC-SFP 211
C-54 E-MC 215
C-54 E-MC /SA 215
C-54 E-MC /SFP 215
C-60 E....../SA 219
C-60 E-MC 219
C-60 E-MC-SFP 219
C620 E 223
C620 E.../SA 223
C620 E-SFP 223
Camera Power Adapters 149
CCM 1010 ......./SA 463
CCM 1010 RX 463
CCM 1010 RX/RS232 463
CCM 1010 TX 463
CCM 1010 TX/RS232 463
CCM 1010(/RS-232) 463
CD820F1 47
CD820F2 51
Ceiling Mount Accessories 157
CM01 157
CM02 157
CM03/HD 157
CM03/MD 157
CM04/HD 157
CM04/MD 157
CM06 157
DC01 169
DC02 169
DC03 169
DC04 169
DC12 169
DC13 169
DC14 169
www.tkhsecurity.com
Index
Model PageDIVA VMS 5
DIVA-B xxxx 5
DIVA-P-yyyy 5
DIVA-S 5
Dome Covers 169
ECO-plug 339
ECO-plug adapter cable BNC bulkhead 2m* 339
ECO-plug adapter cable BNC bulkhead 40cm* 339
ECO-plug BNC ground strap 5cm 339
ECO-plug BNC patch panel 339
FD820 39
FD820 M1 39
FD820 M1IR 39
Ferrite 1325-0530 (cable clamp type) 339
HD10A 73
HD10A PRH /N 123
HD10A PRH /P 123
HD10A/N 73
HD10A/P 73
HD10APRH 123
HD11APRH 127
HD11APRH /N 127
HD11APRH /P 127
HD12A 77
HD12A /N 77
HD12A /P 77
HD16AWDR 81
HD16AWDR/N 81
HD16AWDR/P 81
HD18 EXP 139
HSD620 85
HSD620/N 85
HSD620/P 85
HSD620PRH 131
HSD620PRH /N 131
HSD620PRH /P 131
HSD621 PRH /N 135
HSD621 PRH /P 135
HSD621PRH 135
HSD622 91
HSD622/N 91
HSD622/P 91
HSD626 97
HSD626 /N 97
HSD626 /P 97
Model PageHSD628EXP 143
HSD628EXP/N 143
HSD628EXP/P 143
HSD820H1-EP 107
HSD820H1-IM 103
HSD820H2-E 119
HSD820H2-I 113
HSG/Ceiling 153
HSG/Corner 153
HSG/Pole 153
HSG/Sun 153
HSG/Wall 153
HSG01 153
HSG02 153
HSG02LV 153
HSG03 153
HSG03LV 153
IFD820 43
IFD820V1IR 43
iProtect™ 235
iPU-8 237
Lenses 177
MC 10 AC-115 /EB-2 467
MC 10 AC-230 /EB-2 467
MC 11 AC-115 467
MC 11 AC-115 /EB-2 467
MC 11 AC-230 467
MC 11 AC-230 /EB-2 467
MC 11 DC-24V 467
MC10, MC11 467
MD10A 55
MD10A/N 55
MD10A/P 55
MD12A 59
MD12A/N 59
MD12A/P 59
Mifare® 239
MSD620 63
MSD620 /N 63
MSD620 /P 63
MSD622 67
MSD622 / N 67
MSD622 / P 67
MT 03 471
Multifunction Monitor 173
www.tkhsecurity.com
Index
Model PageOCTA 4000 435
OCTA 4010 RX 435
OCTA 4010 TX 435
OCTA 4050 RX 435
OCTA 4050 TX 435
OCTA 40XX/SA 435
OCTA 4300 439
OCTA 4310 RX 439
OCTA 4310 TX 439
OCTA 4350 RX 439
OCTA 4350 RX/ED 439
OCTA 4350 TX 439
OCTA 43XX /SA 439
Option Module A 523
Option Module B 523
Option Module C 523
Option Module D 523
Option Module E 523
Option Module GM 523
Option Module GR 523
Option Modules 523
Orbit 1, 2, or I/O Door Controller 243
PA01 /EU 149
PA01 /UK 149
PA01 /US 149
PA02 /EU 149
PA02 /UK 149
PA02 /US 149
PA03 /EU 149
PA03 /US 149
Pico AC-25 347
Pico Camera Kit / x 2 347
Pico RX 347
Pico™ series 347
PM01 161
PM02 161
PM03 161
PM04 161
PM05 161
Pole Mount Accessories 161
Polyx Network Controller 247
PSA-UN12DC with ferrules 149
RDM-back distance plate for AlphaVisionProximity Reader 281
S-50 E -MSA 183
Model PageS-50 E-MSA/PoE 183
S-50 E-MSA/SFP 183
S-54 E 187
S-54 E /SA 187
S-60 D...../SA 191
S-60 D-MC 191
S-60 D-MC-SFP 191
S-60 E 195
S-60 E...../SA 195
S-60 E-SFP 195
S620 E 207
S620 E.../SA 207
S620 E-SFP 207
S-64 E /SA 199
S-64 E-SFP 199
S-64 E-XT 199
S-64E 199
S-68 E 203
S-68 E/SA 203
S-68 E/SFP 203
Sirius 251
SpectraStream™ 451
SpectraStream™ and SpectraStreamPlus™ 455
SS01/HD 169
SS01/MD 169
ST01 161
ST02 161
Surveillance Controller 181
TETRA 4000 403
TETRA 4010 RX 403
TETRA 4010 TX 403
TETRA 4050 RX 403
TETRA 4050 TX 403
TETRA 4200 407
TETRA 4210 RX 407
TETRA 4210 TX 407
TETRA 4250 RX 407
TETRA 4250 TX 407
TETRA 42XX/SA 407
TETRA 4300 411
TETRA 4310 RX 411
TETRA 4310 TX 411
TETRA 4350 RX 411
TETRA 4350 RX/ED 411
TETRA 4350 TX 411
www.tkhsecurity.com
Index
Model PageTETRA 43XX /SA 411
TETRA40XX/SA 403
TrafficServer/SA 227
TrafficServer-SFP 227
TrafficServer™ 227
TraffiServer /TDC 227
Up-the-Fiber™ 4000 351
Up-the-Fiber™ 4200 Bilinx™ 367
Up-the-Fiber™ 4200 MM 359
Up-the-Fiber™ 4200 SM 363
UTF 4000 RX 351
UTF 4000 RX-2 351
UTF 4000 TX-MSA 351
UTF 4040 RX 351
UTF 4040 RX-2 351
UTF 4040 TX-MSA 351
UTF 40xx/ SA 351
UTF 4200 RX 359
UTF 4200 RX/ Bilinx 367
UTF 4200 RX-2 359
UTF 4200 RX-2/ Bilinx 367
UTF 4200 TX-MSA 359
UTF 4200 TX-MSA/ Bilinx 367
UTF 4210 RX 359
UTF 4210 RX/ Bilinx 367
UTF 4210 RX-2 359
UTF 4210 RX-2/ Bilinx 367
UTF 4210 TX/ Bosch 359
UTF 4210 TX-MSA 359
UTF 4210 TX-MSA/ Bilinx 367
UTF 4240 RX 363
UTF 4240 RX-2 363
UTF 4240 TX-MSA 363
UTF 4250 RX 363
UTF 4250 RX/ Bilinx 367
UTF 4250 RX-2 363
UTF 4250 RX-2/ Bilinx 367
UTF 4250 TX /Bosch 363
UTF 4250 TX-MSA 363
UTF 4250 TX-MSA/ Bilinx 367
UTF 42xx /SA 363
UTF 42xx/ SA 359
UTF 42xx/Bilinx/ SA 367
VBS 2000 355
VBS 2010 RX 355
Model PageVBS 2010 TX 355
VBS 2020 RX-3 355
VBS 2020 TX 355
VBS 2020 TX-3 355
VBS 2050 RX-3 355
VBS 2050 TX 355
VBS 2050 TX-3 355
VBS 20xx /SA 355
VL01 177
VL11 177
VL12 177
VL22 177
VL23 177
VL24 177
VL31 177
VL32 177
VL34* 177
Wall Mount Accessories 165
WM01A 165
WM02 /HD* 165
WM02 /MD* 165
WM04 165
WM05 165
WM06 165
WM07 165
XSNet™ 3100MC 327
XSNet™ 3110MC 327
XSNet™ 3140MC 327
XSNet™ 3150MCA 327
XSNet™ 3150MCB 327
XSNet™ 3200MC PoE 331
XSNet™ 3210MC PoE 331
XSNet™ 3240MC PoE 331
XSNet™ 3250MCA PoE 331
XSNet™ 3250MCB PoE 331
XSNet™ 3300MC SFP 335
XSNet™ 4000SW 307
XSNet™ 4010SW 307
XSNet™ 4040SW 307
XSNet™ 4050SWA 307
XSNet™ 4050SWB 307
XSNet™ C4104SW 311
XSNet™ C4108SW 319
XSNet™ C4208SW PoE 295
XSNet™ C4216SW PoE 299
www.tkhsecurity.com
Index
Model PageXSNet™ C4216SW PoE MM 299
XSNet™ C4216SW PoE SM 299
XSNet™ S4104SW 315
XSNet™ S4108SW 323
XSNet™ S4124SW and XSNet™ S4124SW SFP 303
XSNet™ S4124SW SFP 303
XSNet™ SFP 343
XSNet™ SFP MM/1310 343
XSNet™ SFP MM/850 343
XSNet™ SFP SM/10 343
XSNet™ SFP SM/60 343
XSNet™ SFP SM/BidiA 343
XSNet™ SFP SM/BidiB 343
XSNet™ SFP SM/CWDM* 343
www.tkhsecurity.com
Index