ICCE-19 July 24-30, 2011 Shanghai, China

July 24, 2011 Sunday night reception andc registration 7:00PM-9:00PM

July 25, 2011 Monday Keynote Lectures, 8AM-12:45PM

Chairs: H.U. Habermeier, J. Nogues Globalization of Education and Research (opening speech) Kendall T. HARRIS (Dean of Engineering, Prairie View A&M U., Texas) 8:00AM-8:15AM

A Few Interesting Size-Scale Problems Of Low-Dimentional Ferroelectric Materials Daining FANG (Peking U., China) 8:15AM - 8:45AM

Advanced Continuous Nanofibers And Structural Supernanocomposites: Status And Prospects Yuris DZENIS (U. Nebraska-Lincoln) 8:45AM-9:15AM

Status In The Growth Of Anisotropic Oxide Thin Films And Heterostructures For Future Electronics Kazuhiro ENDO (Kanazawa I.T. Japan) 9:15AM-9:45AM

Carbon Nanopaper Enabled Structural And Multifunctional Nanocomposites Jihua GOU (U. Cen. Florida) 9:45AM-10:15AM

Chairs: K.T. Haris, L. Feo Complex Oxide Interfaces – A Tool To Design New Materials Hanns-Ulrich HABERMEIER (Max-Planck-Inst. Stuttgart, Germany) 10:15AM-10:45AM

Directions For Hypersonic Thermal Protection Systems And Materials Severed At Ultra- High-Temperature Environment Jiecai HAN (Harbin I.T., China)

Novel Structural And Magnetic Effects In Passivated Antiferromagnetic Transition Metal Monoxides: Inverted Antiferromagnetic (AFM)/Ferrimagnetic (FIM),

Core/Shell Nanoparticles Josep NOGUES (UAB, Bellaterra, Spain) 11:15AM-11:45AM

Advancement of Basalt Fibers towards Structural Applications Zhishen WU (Southeast U., Nanjing, China and Ibaraki, Japan) 11:45AM-12:15PM

Multiple Levels, Scales And Functions In Micro/Nano Structures Of Dragonfly Wing Veins Zheng ZHONG (Tongji U., Shanghai, China) 12:15PM-12:45PM

12:45PM-2:15PM LUNCH

Session 1a MATH 1

Monday 2:15PM-4:45PM Ballroom 1

Chairs Q. Gao, B. Tian, G. Westin, K.C. Chuang

A Precise Numerical Method for Surface

Waves in a Layered Space Q. GAO, W.X.

Zhong (Dalian U.T., China)

Theoretical Analysis And Numerical Modeling

Of Elastic Wave Propagation In Honeycomb-

Type Periodic Structures Biyu TIAN, Bing

Tie, Denis Aubry (Ecole Centrale Paris, France),

Xianyue Su (LTCS, Prking U., China) Scalable Solution Based Processes To Energy

Materials Gunnar WESTIN, Annika Pohl, Åsa

Ekstrand (Uppsala U., Sweden), Kjell Jansson

(Stockholm U., Sweden)

In-Plane Dynamic Displacement Measurement

Using A Pointwise Fiber Bragg Grating Sensing

System Kuo-Chih CHUANG (Zhejiang U., Hangzhou, China), Chien-Ching Ma (Nat. Taiwan U.,

Teipei) Mon-Tues

Nonlinear Thermo-Mechanical Responses Of Smart

Skin Sturctures Kwang-Kyu YOO, Ji-Hwan Kim

(Seoul Nat.U., S. Korea) Mon-Tues

Hygrothermal Effects On The Structural Behaviors

Of Functionally Graded Plates Chang-Yull LEE, Ji-

Hwan Kim (Seoul N.U., S.Korea) Mon-Tues

Effects Of Cutout Shapes On Postbuckling

Response Of Quasi-Isotropic Laminate Under

Combined In-Plane Loads Dinesh KUMAR, S.B.

Singh (Birla I.T.,and Sci., India) Mon-Tues 4PM

An Effective Flaw Model On Analyzing Nanofiller

Agglomeration In Nanocomposite Materials L.

Roy XU, Arun Krishnan (U. Texas-El Paso) Mon-Tues

Session 1b MAGNETIC 1

Monday 2:15PM-4:45PM Ballroom 2 Chairs: C. Ke, D.S. McLachlan, V. Kudrle, S.K. Bose

Preparation And Magnetization Of Iron Nanowire

Arrays With Different Configurations C. KE

(Southwest Jiaotong U., Chengdu, China), C.H. Cheng

(U. NSW, Sydney, Australia), G.X. Yang (SWJTU),

Y. Zhao (SWJTU, and U. NSW)

Percolation Behavior in the Magnetic Permeability

and Conductivity of Conducting Magnetic -

Insulating Non Magnetic Binary Composites David

S. McLACHLAN (U. Stellenbosch, S.Africa), T B Doyle (Faure, S. Africa), Godfrey Sauti.(Hampton,

VA)

Versatile Pecvd Process For Preparation Of Iron-

Based Magnetic Nanoparticles P. Zelina, O. Jasek, V.

KUDRLE (Masaryk U., Brno, Czech Rep.), B. David,

N. Pizúrova (ASCR, Brno, Czech Rep.), D. Hemzal (Masaryk U., Brno)

Magnetism And Electronic Transport in

(Cu,Ni)2MnSn Heusler Alloys Under Ambient And

Elevated Pressures S.K. BOSE (Brock U., Ontario,

Canada), J. Kudrnovsky, V. Drchal (Czech Acad Sci, Prague)

Magnetism and Half-Metallicity Of Some Cr-based

Alloys And Their Potential For Application In

Spintronic Devices Yong LIU (Yanshan U., Hebei,

China), Shyamal K. Bose (Brock U., Ontario, Canada)

Temperature Behavior Of Light Scattering by

Ba2NaNb5O15 Crystal S. IVANOVA (Lebedev Phy.

Inst. RAS, Moscow, Russia) Formation Of CuxO

(x=1, 2)

Nanowires By Thermal Annealing Copper Film

Deposited On Ti/Si Substrate Yao WANG, Ruiqi

Shen, Yinghua Ye, Yan Hu, Peng Zhu (Nanjing U. Sci.Tech., China)

Session 1c INFRA 1

Monday 2:15PM-4:45PM Ballroom 3

Chairs: H.Y. Jeon, Na Wang, J.Y. Wu, H.S. Ahn

Dependence Analysis Between Stress Crack

Resistances And Long-Term Performance Of

HDPE Geomembrane Han-Yong JEON,

SuKyung Kim, JuHee Park (Inha U., S. Korea)

Structural Health Monitoring and Next

Generation SCADA Of Pipes Network

Retrofitted With FRP Composites

Ayman MOSALLAM, M. Shinozuka

(UC Irvine, Calif.)

Study of Coaxial Connecting Methods of FRP

Rebars with Winding Fiber Cloth Composites

G.Q. YUAN, G. Dong, J. Ma (Tongji U.,

Shanghai, China), Luciano Feo (U. Salerno,

Italy), David Hui (U. New Orleans)

Investigation Of Natural Rubber Composites

With Addition Of Mesoporous MCM-41

Fillers Na WANG, Xiangzhou Wang, Jing

Zhang, Qinghong Fang (Shenyang U. Chem.

Tech., China), David Hui (U. New Olreans)

Flexural Behavior Of Recycled Polymeric

Composite Railroad Ties Vijaya GOPU (U.

New Olreans)

Dynamic Characterization Of A Delaminated

Ship Deck Plate Ionel Chirica, Elena-Felicia

Beznea (U. Galati Romania), David Hui (U. New

Orleans)

Session 1d BIO 1

Monday 2:15PM-4:45PM Dalian Room

H. Bao, P.C. Chen, S. Kambo, Jinhai Yu

Simulation For Exogenous Microbial Depolymerization Of

Polyethylene Glycol Hongmei BAO, Masaji Watanabe (Okayama U.,

Japan), Fusako Kawai (Kyoto I.T., Japan)

Searching for the Optimum Conditions of NLC-Sunscreen Formulae

by Using Taguchi’s Method Pao-Chi CHEN, H.C. Chen, J.W. Huang

(Lunghwa U.Sci.Tech., Taoyuan), J. Pang (Taiwan AC Sci. Inc.,

Taoyuang) Citric Acid As An Effective Release Retarding Agent In Matrix Tablets

Formulation Sunil KAMBOJ (M.M. Univ., Ambala, India), G.D. Gupta (Punjab,

India), Suman Kamboj, Anroop B. Nair, Sumeet Gupta, Vipin Saini (M.M. Univ.,

India)

Engineering of a Novel Pluronic F127/Graphene Nanohybrid for Drug Delivery

Jinhai Yu (Qingdao U. Sci.Tech., China), Haiqing Dong, Yongyong LI (Tongji U.

Shanghai, China) Human Bone As Composite Material M.E. Aksoy (Min. of Health, Istanbul,

Turkey), I. Kutbay, M. Usta (Gebze I.T., Turkey), C. Bindal (Sakarya U.), A. Gul (Istanbul T.U.), A. Hikmet UCISIK (Bogazici U., Bebek- Istanbul, Turkey)

Diagrams For Quasi-Brittle Fracture Of Bimaterial V.M. KORNEV, V.D.

Kurguzov, N.S. Astapov (Novosibirsk, Russia) Preparation And Characterisation

Of Hydrophilic/Hydrophobic Composite Scaffolds Chengdong JI, Xia Zhong (U.

Sydney, Australia), Sergei G. Kazarian (U. College, London, UK), Andrew Ruys,

Fariba Dehghani (U. Sydney) Mon-Wed Bioactive Glass Scaffolds for Bone Tissue Engineering Qiang FU (Lawrence

Berkeley Nat La., Calif.), Eduardo Saiz (Imperial Coll., UK), Antoni P. Tomsia

(Lawrence Berkeley N.L.) Mon-Tues

Session 1e GENERAL 1

Monday 2:15PM-4:45PM Hangzhou Room

Chairs: W. Gennari, F. Rumiche, J .Ihm, A.A. Kadir

Epoxy Granite Toolholders for Turning Applications Walter GENNARI

(U. Brasilia, Brazil)

Double-Walled Carbon Nanotube Structured Hydrogen Sensors

Francisco RUMICHE (Pontificia U. Catolica Peru, Lima), H.H. Wang

(Argonne N.L., IL), J.E. Indacoche (U. Illinois Chicago)

Hydrogen Storage In Metal-Decorated Nanostructureed Materials

Jisoon IHM, Keunsu Choi, Jaehyun Bae, Changwon Park (Seoul Nat U., S.

Korea) Mon-Tues before 3PM

Microstructure Analyses On The Effect Of Incorporating Cigarette

Butts In Fired Clay Bricks Aeslina Abdul KADIR (UTHM, Johor,

Malasia), Abbas Mohajerani (RMIT, Melbourne, Australis) Mon An Investigation On The Tribological Properties Of Over Deformed Al/SiCP

Composites M. Baki KARAMIS, F. Nazlı Sarı, Veysel Erturun (Erciyes U., Turkey)

Mon-Tues noon

Synthesis of TeO2 nanowires by simple thermal oxidation of Te

Nanowire Changzeng YAN, Dae Joon Kang (Sungkungkwan U.,

Suwon, S. Korea)

Computation And Stereographic Visualization Of Temperature And

Heat Flux In A Thermal Barrier Coating Of A Turbine Blade Stephen Akwaboa, S. Kodiyalam, Amitava JANA, P. Mensah, R. Diwan

(Southern U. Baton Rouge, LA) Mon-Tues

Short Break 4:45-5:00PM

Session 2a MATH 2

Monday 5:00PM-7:30PM Ballroom 1

Chairs: L.Zhao, W. Qiu, J. Majak, A. Alonso

Study On Dielectric Properties Of CNF/Pei

Composites Lijie ZHAO, Gang Sui, Xiaoping

Yang (Beijing U. Chem Tech., China)

Buckypaper (Carbon Nanotube Film) as

Mechanical Sensor by Micro-Raman

Spectroscopy Wei QIU, Yi-Lan Kang, Wei-

Lin Deng, Qiu Li (Tianjin U., China)

Ballistic Properties Of Polymer Matrix

Composites And Ceramic Plates Used In

Armor Design Mehmet COLAKOGLU (U.

Pretoria, S. Africa), Omer Soykasap (Afyon

K.Univ., Turkey)

Stationary Of The Strain Energy Density In

Anisotropic Solids Juri MAJAK, Meelis

Pohlak (Tallinn U.T., Estonia) Electrohydrodynamic Generalized Dispersion of

Unsteady Convective Diffusion in Couple Stress

Poorly Conducting Fluid Bounded by Porous Layer

K.S. MALLIKA, N..Rudraiah (Global Acad Tech., Bangalore, India)

Effective Properties Of Multilayered Composites In

Spherical Coordinates

Alejandro ALONSO Fúster , Raúl Guinovart Díaz,

David Guinovart Sanjuán, Julián Bravo Castillero,

Reinaldo Rodríguez Ramos (La Habana, Cuba)

Modelling Of Effective Elastic Properties And

Crack Bridging In Metal-Ceramic Interpenetrating

Phase Composites Michał BASISTA, Zuzanna Poniżnik (Polish Acad Sci, Warsaw)

Investigation Of Interlaminar Resistance Of Angled

Laminate Beams

Gang ZHOU, P. Nash (Loughborough U., UK), J.

Callahan, J. Haworth, K. O’Brien, B. Aspinall, P.

Ripley, J. Rishton (Aircelle Ltd, Burnley, UK)

Session 2b MAGNETIC 2

Monday 5:00PM-7:30PM Ballroom 2

Chairs: Y. Shen, N.D. Sang, J. Zeng, T.C. Chen

Is The Dip Of Reflectance Always Caused By

Plasma? Yan SHEN, Wei-Xi Zhou, Jian-Bo Chen, Jing Li, Yu-Xiang Zheng, Hai-Bin Zhao, Rong-Jun

Zhang, Liang-Yao Chen (Fudan U., Shanghai, China),

Wei Li, Xun-Ya Jiang, (Shanghai Inst. Microsys Inform Tech, CAS, China), David W. Lynch (Iowa St.U.,

Ames)

Effect Of Sulfamic Acid As Complexing Agent On

Electrodeposition of CIGS Absorber Thin Film

Pham Hong QUANG, Dang Thi Bich Hop, Ngo Dinh

Sang, Le Tuan Tu, Nguyen Hoang Nghi (Hanoi U. Science, Vietnam)

Effect Of Electrodeposition Potential On The

Composition And Morphology Of CIGS Absorber

Thin Film NgoDinh SANG (Nat. U. Civil Eng.,

Hanoi, Vietnam), Pham Hong Quang, , Le Tuan Tu,

Dang Thi Bich Hop, Nguyen Thanh Nghi (Hanoi U. Sci, Vietnam)

Influence Of Humidity And Elevated Temperature

On Magnetic Properties Of Nd-Fe-B Anisotropic

Bonded Magnets Dariusz KAPELSKI, Barbara

Slusarek, Bartosz Jankowski, Marcin Karbowiak,

Marek Przybylski (Tele and Radio R.I., Warsaw, Poland)

Rapid Initiation Of Reactions In Al/CuO-Based

Reactive Multilayer Films Xiang ZHOU, Ruiqi Shen (Nanjing U. Sci.Tech., China)

Percolation and Conductivity of SWNT Networks

with Layer-By-Layer Spray Deposition

Y. Miao, L. Chen, Q.Q. Yang, R. Sammynaiken, W.J.

(Chris) Zhang (U. Saskatchewan, Canada)

Nanoscale Mechanical And Mechanically-Induced

Electrical Behaviors Of Silicon Nanowires

Tei-Chen CHEN, Yen-Hung Lin (Nat. Cheng Kung U., Tainan), Yuh J. Chao (U. South Carolin), Xiaodong Li

(Nat. Cheng Kung U.)

Session 2c INFRA 2

Monday 5:00PM-7:30PM Ballroom 3

Chairs: H. Lim, X.Y. Wang, B.C. Tobias, Z.

Ouyang

Properties Of Non-Shrinkage Chemical Grout

Using Silanol/Si-Oh For Repairing And

Strengthening Of Concrete Structures H.J.

JU, D.H. Lee, K.S. Kim, D.H. Kim,

J.Y. Kwak (G-stone, Seoul, S. Korea)

Consolidation Of Silica Sand-Cement

Frogbrick Composites

Benjamin C. TOBIAS (Catholic U. Daegu,

Hayang, S. Korea)

Experimental Study On Basalt Fiber

Reinforced Syntactic Foams

Morampudi Vijay, Zhenyu OUYANG (Southern

U. A&M U., Baton Rouge, LA)

Buckling And Postbuckling Behaviour Of A

Delaminated Ship Deck Plate Subjected To

Shear Loading Ionel CHIRICA, Elena-Felicia

Beznea (U. Galati, Romania), David Hui (U.

New Orleans) Longitudinal Wave Velocity Of Bonded PSC Wires

Embedded In Nuclear Containment

Byeong Hwa KIM (Kyungnam U., S. Korea), Do Hyung Lee (Paichai U., Daejeon, S. Korea)

Storage Stability And Physical Properties Of

Asphalt Modified With Nanoclay And Warm

Asphalt Additives

Mohd Ezree ABDULLAH, Kemas Ahmad Zamhari,

Nafarizal Nayan (UTHM, Johor, Malaysia), Mohd Rosli Hainin (U.Teknologi Malaysia), Madi Hermadi

(UTHM, Johor, Malaysia)

Bayesian Belief Network Model for the

Deterioration of a Suspension Bridge

Taejun CHO (Daejin U., Pocheon, S. Korea)

Session 2d OXIDE 1

Monday 5:00PM-6:55PM Dalian Room

Chairs: K. Fujiwara, P. Mele, Y. Tsuchiya Q. Guo

Structural Properties Of Magnetite Films Grown By Pulsed Laser

Deposition Qixin GUO, Kazuki Nakamura, Katsuhiko Saito, Tooru

Tanaka, Mitsuhiro Nishio (Saga U., Japan), Makoto Arita, Yoshifumi Ikoma

(Kyushu U.,Fukuoka, Japan), Jian Ding, Di Zhang (Shanghai Jiaotong U.,

China) INVITED

Observation of Local Electrochemical Phase Change in Resistive

Switching Devices Kohei FUJIWARA (Osaka U., Japan), Yosuke Konno,

Yoshinobu Nakamura (U. Tokyo, Japan), M.J. Rozenberg (U. Paris-Sud,

France), Hidenori Takagi (RIKEN, Saitama, Japan) INVITED

Synthesis and Characterization of YBa2Cu3Ox Thin Films

Incorporating BaSnO3 Length-Controlled Nanorods

Paolo MELE (Hiroshima U., Japan), K.Matsumoto, Y. Honda, I. Tanaka

(Kyushu I.T., Japan), A. Ichinose (CRIEPI), Y. Yoshida, Y. Ichino (Nagoya

U., Japan), R. Kita (Shizuoka U., Japan) INVITED

Single-Walled Carbon Nanotube/PMMA Composite via an

Electrostatic Adsorption Assembly Technique Hiroyuki MUTO, Norio

Hakiri, Go Kawamura, Atsunori Matsuda (Toyohashi U.T., Japan)

INVITED

Pulsed Laser Deposition Of LaFeO3 Thin Films Using The Target

Prepared By Pechini Method Yoshito TSUCHIYA, Kento Norota, Yuta

Watabe, Takuji Kuroda, Nobuyuki Iwata,Takuya Hashimoto, Hiroshi

Yamamoto (Nihon U., Chiba, Japan)

Growth Of AFeOX (A = Ca, Sr) By Pulsed Laser Deposition Method At

High Pressure Oxygen And Ozone Atmosphere Kento NOROTA,

Yoshito Tsuchiya, Yuta Watabe,Takuji Kuroda, Nobuyuki Iwata, Takuya

Hashimoto, Hiroshi Yamamoto (Nihon U.,Chiba, Japan)

Special OXIDE BREAKOUT SESSION Monday 7:00PM-7:30PM Dalian Room

Chairs: T. Endo, H. Muto, K. Tanaka

K. ENDO, H.-U. HABERMEIER, J. NOGUES 5`talks, and discussion

Session 2e GENERAL 2

Monday 5:00PM-7:30PM Hanzhou Room

Chairs: L. Feo, S.R. Das, H. Marzouk, D.Z. Chen, M.A. Omar

Crashworthiness Of Vehicle Composite Sandwich Structures P. C. Neves (IDMEC, Porto, Portugal), A. A. Fernandes, A. J. M. Ferreira

(U. Porto, Portugal)

Formation Of Heterogeneous Microstructure In Steel Plate Processed

By Accumulative Surface Forming

Libor KRAUS, Michal Zemko, Zbysek Novy (COMTES Fht, Czech Rep.)

Experimental Study Of The Instability Of Longshore Currents On

Different Plane Beaches Zhili ZOU, C.P. Ren, D.H. Qiu (Dalian U.T.,

China)

Two-Input Or/Nor Cascade In Space Compression In VLSI

Sunil R. DAS (Troy U., Montgomery, AL), Satyendra N. Biswas (Dhaka,

Bangladesh), Altaf Hossain, Mansour H. Assaf (U. Ottawa, Canada)

Impact-Echo Technique For Detecting The Cracks Propagation In

Concrete Plates N. Dawood, H. MARZOUK (Ryerson U., Toronto,

Canada)

Composite Repair Using Vartm Techniques

Ronald STERKENBURG, PengHao Wang (Purdue U., W. Lafayette, IN)

Advanced Simulation and Analysis of Materials Behavior during

Intense Power Deposition in Tokamaks, Inertial Fusion, and EUV

Lithography Devices Ahmed HASSANEIN, V. Sizyuk, T. Sizyuk, G.

Mihloshevsky, S. Harilal (Purdue U., W. Lafayette, IN)

Development Of Fracture Fixation Plates Prototype Through Metal

Injection Moulding (Mim) Process

Mohd A. OMAR, I. Subuki, N. Abdullah, M.F. Ismail, A.H. Hashim

(SIRIM, Kedah, Malaysia), A.H. Zulkifly (U. Malyasia Kuantan, Pahang)

Session 3a MATH 3

Monday 7:30PM-10:00PM Ballroom 1

Chairs: S. Jafari, H.S. Ullah Butt,

O. Benjeddou, S.Y. Sun

Natural Frequency Analysis Of Thick

Rectangular FGM Plates Under In-Plane

Loading By Differential Quadrature

Method Saeed JAFARI, Mansour

Mohieddin Ghomshei (Islamic Azad U.,

Iran)

Basic Study of Wimax Simulation

Monika RANI, Anil Rose (Denhandhu C.R.

Univ., Haryana, India)

Coupled Structural/Thermal Analysis Of

Cylindrical Part Of Multilayered

Composite Vessel

A. HOCINE, H. Ghouaouala, F. Kara Achira

(Hassiba BEnbouali U.,Algeria)

Size Effect On Tensile Stress Of Dry

Unidirectional Carbon Fibers Sheets

Omrane BENJEDDOU, Oualid Limam,

Mongi Ben Ouezdoua (Ecole Nat Ing

Tunis,Tunisia)

Interfacial Toughening Mechanism Of

Foam Core Composite Sandwich Beams

With Chopped Fibers

Shiyong SUN, Chen Haoran (Dalian U.T.,

China) Analysis of Micromechanical Behavior in

Short Fiber Composites

HongGun KIM, Lee Ku Kwac, Seung Gyu Oh,

Tae Hoon Kim, Bophang Sorn,Hee Jae Shin

(Jeonju U., S. Korea), Chai Young Lim, Ki Hyun

Yoo, Jeong Sang Song,Yong Hong (Chonbuk, S.

Korea)

Session 3b METAL 1

Monday 7:30PM-10:00PM Ballroom 2 Chairs: Y. Tian, R. Kozera, P. Chabera,H.

Bayrakdar

Corrosion Behavior of KFRP at High

Temperature Dry-Wet Cycle In Salt Water

Ye TIAN, Dongxing Zhang, Dihong Li, Haiying

Xiao, Jin Jia (Harbin I.T., China)

Corrosion Behavior Of Different Prestressing

Strand Types For Use In The Post Tensioning

Of Bridges R.D. Kalina, S. MacLean, J.E.

Breen, Harovel G. WHEAT (U. Texas, Austin)

Effect Of Electroless Metallization Parameters

Of Carbon Fibres On Ni-P Coatings

Rafał KOZERA, Jerzy Bieliński, Anna

Sałacińska, Joanna Olejniczak, Anna

Boczkowska, Krzysztof J.Kurzydłowski (Warsaw

U.T., Poland)

Microstructure And Mechanical Properties Of

Cermic-Metal Composites Obtained By

Pressure Infiltration PAULINA CHABERA,

Anna Boczkowska, Artur Oziębło, Zbigniew

Pakieła, Krzysztof J. Kurzydłowski (Warsaw

U.T., Poland)

Microwave Absorption Properties Of Ferrite–

Acrylated Epoxy Polymer Nanocomposites

Harun BAYRAKDAR (Gebze I.T., Turkey)

Laser Cladding Of Cu0.5 NiAlCoCrFeSi High

Entropy Alloy On AZ91D Magnesium

Substrates T.M. YUE, K.J. Huang (Hong

Kong Poly U., SAR, China) Mon-Tues

Core-Shell Structure And Mechanical

Behavior Of A New Type Of Iron-Containing

Titanium/Hydroxyapatite Composites Q.

Chang, Daolun CHEN (Ryerson U.,

Toronto, Canada), H.Q. Ru, X.Y. Yue, L. Yu, C.P.

Zhang (Northeastern U., China) Mon-Wed

Oxidation Behaviour Of Ion-Implanted

Nanocrystalline Fe-Cr Alloy Fabricated By

Different Densification Techniques: Spark

Plasma Sintering And Hot-Pressing

Darwin SEBAYANG, Deni S. Khaerudini, H.

Saryanto, M.A. Othman, S. Hasan(UTHM, Johor,

Malaysia), D. Fredrick (Santa Rosa, Calif.), T.

Sujitno, P. Untoro (Banten, Indonesia)

Session 3c CHEM 1

Monday 7:30PM-10:00PM Ballroom 3 Chairs: Y.N. Makogon, B. Jiang, F.M.B. Marques

M.B. Agustin

Thermostimulated Synthesis Of MoO3 And

WxMo 1-XO3 Nano- And Microscale Particles

And Their Application For Deposition Of Ni-

Oxide Composites T.V. SVIRIDOVA, L.I.

Stepanova, D.V. Sviridov (Belarusian St.U.,

Belarus)

Formation of L10(FePt) Phase In

Nanodimensional Fe/Ag/Pt and

Fe50Pt50/Ag/Fe50Pt50 Film Compositions On

Substrates of SiO2/Si(001) Yu N. MAKOGON (Nat. T.U. KPT, Kiev, Ukraine), M. Albrecht, G.

Beddies (Chemnitz U.T., Germany), D.L. Beke, G.L. Katona (U. Debrecen, Hungary), E.P. Pavlova, S.I.

Sidorenko, T.I. Verbitska, I.A. Vladimyrskiy (Nat. T.U.,

KPI)

Preparation of Organic-Inorganic Hybrid AR

Coating by Sol-gel Process

Xinxiang Zhang, Xi Ke, Sida Zhang, Zhili He,

Bo JIANG (Sichuan U., Chengdu, China)

Mixed Ionic Conduction In Homogeneous And

Layered Composite Electrolytes F.M.B.

MARQUES, T. Saradha, A.S. Fereira, S.G.

Patrício, F.M.L. Figueiredo(U. Aveiro, Portugal) Reinforcement Of Starch-Based Biocomposite Film

By Microcrystalline Cellulose From Corn Husk

Melissa B. AGUSTIN, Rohit C. Tilwani, Eriel May T. Bandong, Joel R. Salazar (Central Luzon St.U., Nueva

Ecija, Philippines), Weerachai Phutdhawong

(Kasertsart U., Nakhorn Pathom, Thailand)

Vortex-Induced Assembly Of Protein Nanofibrils:

Towards New Scaffold Materials

Wojciech DZWOLAK (U. Warsaw, Poland)

Novel Application Of Insulin Amyloid

Superstructures As Templates For Surface-

Enhanced Raman Scattering

Slawomir WOJCIK, Wojciech Dzwolak (U. Warsaw,

Poland)

Perylene Diimide (PDI) Based Organic Photovoltaic

Cells with Nano-Fabric Composite Structure

Yong MIN, June H. Park, Austin R. Carter, Lynetta M.

Mier, Sharlene M. Lewis, Raju P. Nandyala (Ohio St.U., Columbus)

Session 3d NANO 1

Monday 7:30PM-10:00PM Dalian Room Chairs: Xiaoyun Jin, Y.ongjian Yang, F. Zairi, x.Y. Jin

Micromechanics-based Modeling of the Effective Viscoelastic Behavior

of Polymer/clay Nanocomposites: Application to Polyamide-6

Reinforced with Modified and Unmodified Montmorillonite Clay K.

Anoukou, F. ZAIRI, M. Naït-Abdelaziz, A. Zaoui, J.M. Gloaguen (U. Lille

Nord de France)

Template-Based Synthesis Of Al/Ni Nanocomposite On Silicon

Substrate Xiaoyun JIN, Yan Hu, Ruiqi Shen, Yinghua Ye (Nanjing U.

Science & Tech.)

Structure and Thermomechanical Properties of Amorphous/Nano-

Crystalline Composites of Shape Memory Ti2NiCu Pnina Ari-Gur (U.

Western Michigan, Kalamazoo), Yongjian YANG (U. Auckland, New

Zealand), S. Belyaev (St. Petersburg, Russia), V. Koledov, D. Kuchin

(Moscow, Russia), W. Gao (U. Auckland), N. Resnina (St. Petersburg),

Plasma-Assisted Synthesis And Modification Of Composite

Nanoparticles In Liquids Nikolai TARASENKO, Andrei Butsen, Alena

Nevar, Mikhail Nedelko, Mehdi Mardanian (NAS, Minsk, Belarus)

Formation of InAs Nanowire by Solid Source Reaction: A Promising

Material As The High Mobility Channel For Nanoelectronics Yu-Lun

CHUEH (Nat. Tsinghua U., Hainchu), Alexandra C. Ford, Ali Javey (UC

Berkeley, Calif.) chair

Preparation and Properties of GRAPHENE and its

NANOCOMPOSITES Chen-Chi M. MA, Shin-Yi Yang, Hsi-Wen Tien,

Jen-Yu Wang, Shin-Ming Li, Yu-Sheng Wang, Chia-Hong Liu, Shu-Han

She, Wei-Ning Lin (Nat. Tsinghua U., Hsinchu) Mon-Tues

Session 3e GENERAL 3

Monday 7:30PM-10:00PM Hangzhou Room Chairs: R. Pan, J.W. Kim, J.M. Ting, A.K. Bharimalla

Polyurethane Hybrid Composites Containing Trisilanolisobutyl Poss:

Preparation, Structure And Properties Rui PAN (Sichuan Normal U.,

Chengdu, China), Ing Kong, Robert. Shanks (RMIT, Australia)

Optimization Of An Airbag Inflator For The Protection Of Occupant

Injury Jin-wu KIM, Sheikh-Md. Rasel, Jung-il Song (Changwon N.U.,

Kyungnam, S. Korea) Mon-Tues

Effect of Refining Pretreatment on Preparation Of Cellulose

Nanofibrils By Mechanical Process A.K. BHARIMALLA, V.S.

Karande, S.T. Mhaske, N. Vigneshwaran (Mumbai, India)

Application Of Atmospheric Pressure Plasma Treatment To Improve

Hydrophilc Property Of Aluminum Foil JaeHa LEE, JaeYoung Jang,

Kyong Yop Rhee (Kyung Hee U., Yongin, S. Korea), HyunWook Kim

(Dongwon Tech Co. Kimhae, S. Korea) 5 min

Atmospheric Pressure Plasma Treatment Of Polypropylene As Door

Panel Part Material JaeYoung JANG, JaeHa Lee, KyongYop Rhee

(Kyung Hee U., Yongin, S. Korea), Hyun Wook Kim (Dongwon Tech Co.,

Gimhae, S. Korea) 5 min

Improvement Of Hydrophilic Property Of Magnesium Alloy Panel

Through Oxygen Plasma Modification Kyong Yop RHEE, Jae Young

Jang (Kyung Hee U., Yongin,S. Korea) 5 min

Non-covalently Functionalized Carbon Nanotubes as Catalyst Supports

for Fuel Cell Applications

Shuangyin WANG, Xin Wang (Nanyang T.U., Singapore)

Session 4a MATH 4

Tuesday 8:00AM-10:30AM Ballroom 1

Chairs: M.F. Ren, C.L. Zhang, N.H. Zhang, J.Y.

Liu

Calculating Investigation On Some Effective

Properties Of Interpenetrating Phase

Composites Hongtao ZHANG (Jiangxi Blue

Sky U., Nanchang, China)

Structural Behaviour Of Composite Cladding

Panels

Jian YANG, Yumin Sun (U. Birmingham, UK)

Inspection Of Subsurface Defects In

Honeycomb Structure Composites Using

Infrared Lock-Cn Thermography Junyan

LIU, Yang Wang (Harbin Inst. Tech., China)

Reinforcement Efficiency Of Carbon

Nanotubes: Probablistic Study Of Nanotube

Waviness Roham RAFIEE (U. Tehran, Iran)

The Language of Two-by-two Matrices

spoken by Optical Devices Y.S. KIM (U.

Maryland) Finite Element Analysis For Interface Crack

In Piezoelectric Composite Under Impact

Loading Rui-Xiang BAI, Liang Wang (Dalian

U.T., China), Ye-Jin Shi (COMAC,Shanghai

Aircraft Design & Res.Inst., China)

Stresses Development In An Advanced Grid-

Stiffened Plate During The Co-Curing Process

Mingfa REN, Qizhong Huang, Haoran Chen

(Dalian U.T., China)

Vibrational Analysis Of Carbon Nanotubes In

Thermal Environments

Chen-Li ZHANG, Hui-Shen Shen (Shanghai

Jiaotong U., China), Jie Yang (RMIT, Melbourne,

Australia)

A Model For Nanomechanical Behaviours Of

Microcantilever-Based Single-Stranded Dna

Chips Induced By Conformational Entropy

Neng-Hui ZHANG, Zou-Qing Tan, Jin-Ying

Shan (Shanghai U., China)

Session 4b TEXTILE 1

Tuesday 8:00AM-10:30AM Ballroom 2

Chairs: B. Provost, J. Wolodko, M.K. Yakubu,

J.M. Byeon

2D Laminated and 3D Warp Interlock Fabric

Under High Velocity Impact

Benjamin PROVOST, François Boussu, Daniel

Coutellier (U. Lille Nord de France)

Feedstock and Processing Effects on the

Performance of Natural Fiber Thermoset

Composites John WOLODKO, Kirill

Alemaskin, Aaron Fuhr, Lisa Sopkow (Alberta

Innovates, Edmonton, Canada) Tuesday-Fri

Flax Fibre Reinforced Poly Lactic Acid

Composites by Solvent-Casting Method

Mohammed K. YAKUBU (Ahmadu Bello U.,

Zaria, Nigeria) , Rakesh Kumar (CSIR, Port

Elizabeth, S. Africa

Effect Of Various Surface Treatments For

Jute Fiber Reinforced Composites

Jeong-myung BYEON, Jin-woo Kim, Gi-beop

Nam, Jung-il Song (Changwon N.U., S.)

Shape Memory Effect and Thermomechanical

Properties Shape Memory Polymer Fabric

Composite in Tension Mode M. Ahmad, D.

Singh, M. Miraftab, J.K. LUO (U. Bolton, UK) Manufacturing Biocomposite Parts Using LRTM

Jayaraman RAGHAVAN, B. O’Connor (U. Manitoba, Canada), G. Kime (Delaware, Canada), B.

Klimack, J.A. Milne (Carlson, Canada), P. Zanetel

(New Flyer Ind., Winnipeg, Canada) Mon-Tues

Session 4c CHEM 2

Tuesday 8:00AM-10:30AM Ballroom 3

Chairs: M. Ionita, A. Oki, B. Ahmmad, C.L.

Cheung

Atom Counting And Atomic Structure For

Monolayer-Protected Gold Clusters Via

Quantitative HAADF- STEM Zhiwei WANG

(U. Birmingham, UK), O. Toikkanen (Aalto U.,

Finland), F. Yin, Z.Y. Li (U. Birmingham), B.M.

Quinn (Aalto U.), R.E. Palmer (U. Birmingham)

Impact Of Chemical Functionalization Of

Swcnts On PPY Nanocomposites: Multiscale

Molecular Modeling And Experimental

Investigations Mariana IONITA, Alina Pruna

(U. Poli Bucharest, Romania)

Pd Nanoparticles Deposited On Poly(Lactic

Acid) Grafted Carbon Nanotubes: Synthesis,

Characterization And Application in Heck C-

C Coupling Reaction Gururaj M. Neelgund,

Aderemi OKI (Prairie View A&M U., TX)

Inorganic Polyoxide Thermoplastics

Alexander SHAULOV, A. Grachev, A.

Lyubimov, G. Lyubimova, E. Stegno, A. Berlin

(Semenov Inst., Moscow, Russia) Green Tea Mediated Biosynthesis Of alpha-Fe2O3

Nano˗/ Micro-Particles And Their

Characterization Bashir AHMMAD (Okayama U.,

Japan), Junichi Kurawaki (Kagoshima U., Japan), Takahiro Ohkubo, Yasushige Kuroda (Okayama U.)

Vertical Growth Of Metallic Boride Nanowires And

Their Field Emission Properties

Robert M. Jacobberger, Joseph R. Brewer, Chin Li

CHEUNG (U. Nebraska, Lincoln)

Polymer/Layered Double Hydroxide

Nanocomposites Kongli Xu (Inst.Chem, CAS, Beijing,

China), Guangming CHEN (Graduate Univ. CAS)

The Effect Of Boundary Layer On Activated Liquid

Phase Sintering Of W-bronze Composites by Co and

Fe Additions Mohamad S Kahtan, R. Azmi (U. Malaysia Perlis)

Session 4d OXIDE 2

Tuesday 8:00AM-10:30AM Dalian Room

Chairs: M. Singh, H. Kezuka, N. Iwata, M. Yokura

Improvement Of R-Plane Oriented Cr2O3 Thin Films Surface Grown

On Sapphire Substrates Nobuyuki IWATA, Takuji Kuroda, Kento

Norota, Yoshito Tuchiya,Yuta Watabe, Kouichi Takase, Hiroshi Yamamoto

(Nihon U., Chiba, Japan) INVITED

Preparation of Bi-Superconducting Grains Included Seed-Crystals By

Shock Compaction Hiroshi KEZUKA (Tokyo U.T., Japan), Kazuhiro

Endo (Kanazawa I.T., Japan), Mineo Itoh (Kinki U.) INVITED

Oxygen Plasma Induced Ultralong Lifetime Of Heat Sealing Effect Of

PET Films Miyoshi YOKURA, Kenichi Uehara, Guo Xiang, Akinobu

Okamoto (Mie U., Japan),Yoshinobu Nakamura (U. Tokyo, Japan),

Lakshmi Reddy (Kadapa, India), Tamio Endo (Mie U., Japan)

Increased Thermal Stability Of Multi-Walled Carbon Nanotube

Structure By Attaching CTAB Capped Zinc Oxide Nanoparticles

Manish Kumar (CSIO, Chandigarh, India), Mandeep SINGH

(Inst.Chem.Tech, Prague, Czech Rep.), Dushyant Kushavah, M.L Singla

(Chandigarh, India)

Nanocrystals-Glass Composites For Photonic Devices Shifeng Zhou, Yu Teng (Zhejiang U., Hangzhou, China), Jianrong QIU

(South China U.T., Guangzhou) INVITED

Depositions Of Proton Conductive Oxide Thin Films By Sol-Gel

Method For Fuel Cell Applications

Kiyoshi UCHIYAMA (Tsuruoka Nat. Coll Tech., Yamagata, Japan)

Scratch Resistance Of Transparent Conductive Oxide Film On

Polymer Substrate Inguna STRAZDINA, Toms Torims (Riga T.U.,

Latvia), Edmunds Macevskis,Viktors Kozlovs (Sidrabe Inc, Riga, Latvia)

Stannic Oxide Nanopowders Via The Co-Precipitation Method

Mohamed .M. RASHAD, Adel A. Ismail, I. Osama, Ibrahim A.Ibrahim

(CMRDI, Cairo,Egypt), Abdel-Hakim T.Kandil (Helwan U., Cairo, Egypt)

Session 4e GENERAL 4

Tuesday 8:00AM-10:30AM Hangzhou Room

Chairs: Tao Deng, D.D. Li, T. P. Chu, W. Taweepreda

Design And Simulation Of The Ultrasonic Spot Metal Welding Horn

Used To Improve Welding Performance Ziad Al-SARRAF (U.

Glasgow, UK)

Micro/Nanoengineered Thermal Ground Plane

Tao DENG, Shakti Chauhan, Chris Eastman, Peter De Bock, Pramod

Chamarthy, Stan Weaver (GE Global Res.Cen., Niskayuna, NY)

TiO2 Nanotubes- Applications in Nanotemplates and Photovoltaics

Dongdong LI, Dongfang Liu, Xiaohong Fang, Linfeng Lu, Changzhou

Wang, Xiaoyuan Chen (Shanghai Adv. Res. Inst., China)

Mechanical Properties Of Self Reinforced Poly(Lactic Acid) Prepared

By Compression Moulding Izan Roshawaty MUSTAPA, Robert A.

Shanks, Ing Kong (RMIT, Melbourne, Australia)

Preparation Of Short Carbon Fiber/Sic Multilayer Composites By

Tape Casting Wenshu YANG, Claudio Badini (Politec Torino, Italy), Laura

Fuso (Dronero, Italy), Sara Biamino, Claudia Vegabolivar Bolivar, Paolo

Fino (Politec Torino, Italy)

Non-Destructive Evaluation Of Carbon-Carbon Composites Using

Infrared Thermography

Tsuchin Philip Chu, Jarlen Don, Yicheng Pan, Anish Poudel (Southern

Illinois U.,Carbondale)

Mixing Solid Particles in Fluidized Beds

Haihong FAN, Delong Xu, Yong Min, Hui Li, Yanxin Chen, Jinhe Fan

(Xi’an U.Architecture & Tech., China)

Self-Assembled Nanometric Spacer on Surface of Natural Rubber

Composited with TiO2

Kritsada Phatcharasit, Wirach TAWEEPREDA (Prince of Songkla U.,Hat-

Yai, Thailand) Mon-Wed

Fabrication Of A Three Dimensional Superhydrophobic Surface

Structure And Characteristics Of Flow Past It Dongseob KIM,

Woonbong Hwang*(POSTECH, Pohang, S. Korea)

Tuesday 10:30AM-11:00AM break

Session 5a MATH 5

Tuesday 11:00AM-1:30PM Ballroom 1

Chairs: L. Tumonis, J.G. Zhai, P. Arato, Y. Zhao

Stochastic Approach To Simulation Of

Interaction Of Multi-Spherical Particles

Rimantas Kacianauskas (Vilnius Gediminas T.U.,

Lithuania), Liudas TUMONIS (Lithuania

Inst.Energy, Kaunas), Algis Dziugys (Lithuania

Inst.Energy)

Application Of Indentation Fracture

Mechanics Approach For Determination Of

Fracture Toughness of DLC Coating Ceramics

Materials Yan-rong WANG, Sheikh-Md.

Rasel, Hyoun-kon Ku, Jung-il Song (Changwon

N.U., S. Korea)

Structural Analysis of Steam Surface

Condenser

Jian-Guang ZHAI (Changwon Nat.U., S. Korea),

Jong-Rae Cho (Korea Maritime U., Busan), Hua-

Hou (North U. of China, Taiyuan, China), Yan-

Rong Wang, Jung-Il Song (Changwon N.U.)

Nonlinear Static Analysis Of A Beam Made Of

Functionally Graded Materials

Julien Thivend, Habib Eslami, Yi ZHAO

(Embry-Riddle Aero U., Daytona Beach, FL)

Stress Relaxation Of Impact Damaged

Composites

Yuanjian Tong (Swansea U., UK, & Beijing

U.Chem.Tech.), David H Isaac (Swansea U.)

Contacts In Ceramic-Carbon Nanocomposites

Peter ARATO (Budapest, Hungary)

Strategies For Improving Ductility Of Bulk

Nanostructured Materials

Yonghao ZHAO (U. Shanghai Sci &Tech., UC

Davis, Calif.)

Session 5b MAGNETIC 3

Tuesday 11:00AM-1:30PM Ballroom 2

Chairs: K.K. Kamani, W..Y. Wu, Kai Liu,

H. Gong

Micro-Raman Characterization of MTMO

Grayscale Photomask

Hao Hu, Jiwei Qi, Liping Sun, Penghong Liu

(Nankai U., Tianjin, China), Qi Wang, Qian Liu

(Beijing, China), Qian Sun, Jingjun Xu,

Xinzheng ZHANG (Nankai U., China) Tues-Wed

Micro and Nano Engineering Multilayer

Polymer Complexes and Opto-Electronic

Systems

K.K. KAMANI, V. Ravindrachary, Ismayil, R.K.

Rangaswami (P.G. Center,Chitradurga, India)

Electromagnetic Property Of Polyaniline With

Different Nanostructures Doped With D-CSA

Shibu ZHU, Xiangnan Chen, Zuowan Zhou

(Southwest Jiaotong U.,Chengdu,China)

Separation of components in rice straw by

environmentally friendly processes

Mengmeng ZHAO, Man Jiang, Zuowan Zhou

(Southwest Jiaotong U., Chengdu, China)

High Energy Thermionic Electron Beam for

Material Surface Modification

Munawar IQBAL, Haris Rashid (U. Punjab,

Lahore, Pakistan)

Chirality Control And Vortex Manipulation In

Nanomagnets Kai LIU, Randy K. Dumas,

Dustin A. Gilbert, Nasim Eibagi (UC Davis,

Calif.) INVITED Mon-Wed

Photoluminescence and Raman Analysis of

Ge-Rich SiGe Nanowires

Hua GONG, Yingjie Ma (Fudan U., Shanghai,

China), Peixuan Chen (IFW Dresden,Germany),

Lijun Wang (Acad Sci, Beijing, China), Armando

Rastelli (IFW Dresden),

Zuimin Jiang, Zhenyang Zhong (Fudan U.,

Shanghai)

Session 5c INFRA 3

Tuesday 11:00AM-1:30PM Ballroom 3

Chairs: M. Osmani, K. Liu, L. Ding, Z.Y. Sun

Volume Changes In Slag In The Subsoil Of

Constructions And Their Influence On Load-

Bearing Structures Radim CAJKA, Petr Martinec

(T.U. Ostrava, Czech Rep.)

Recycling Optimisation Of Concrete

Composites: An Experimental Study

Mohamed OSMANI (Loughborough U., UK)

Fibrous Brucite and Polypropylene Hybrid

Fibers Reinforced Concrete

Kaiping LIU, Jiuran Wen, Zhihua Sun, Zhenjun

Wang (Chang’an U., Xi’an, China),Luciano Feo

(U. Salerno, Italy), D. Hui (U. New Orleans)

Reliability-Based Design Optimization Of

Adhesive Bonded Steel-Concrete Composite

Beams Yangjun Luo (Northwestern Poly U.,

Xi’an, China), Alex LI (U. Reims, France)

Durability Study Of BFRP Bars Immersed In

Water And Alkaline Solution Jingyu WU,

Guijun Xian, Hui Li (Harbin I.T., China)

Application Of DIC Method In Strain

Measurement Of FRP Adhesive Joint

Jiawei SHI, Hong Zhu, Zhishen Wu (Southeast

U., Nanjing, China)

Confinement Effectiveness of CFRP Grids of

Concrete Columns

Lining DING (Southeast U., Nanjing, China),

Sami Rizkalla (N. Carolina St.U., Raleigh), Gang

Wu, Zhishen Wu (Southeast U., Nanjing, China)

Performance of Concrete Columns Reinforced

by Steel-FRP Composite Bar under Static

loading and Dynamic Excitation

Ze-Yang SUN, Gang Wu, Sheng-Ze Yang,

Zhi-Shen Wu (Southeast U., Nanjing, China)

Enhancement of Basalt FRP by Hybridization

For Long-Span Bridges

Xin Wang, Zhishen WU (Southeast U., Nanjing,

China)

Session 5d BIO 2

Tuesday 11:00AM-1:30PM Dalian Room

Chairs: M. Watanabe, J. Lisal, M. Fan, P. Duchek

PLA-Silk Fiber Composites for Biomedical Applications

H.Y. Karen CHEUNG, A. Collier, J. Dean, B Stearn, T.W. Clyne

(Cambridge U., UK) Tues-Wed

Modeling And Simulation For Microbial Depolymerization Of

Polyethylene Glycol Masaji WATANABE (Okayama U., Japan), Fusako

Kawai (Kyoto I.T., Japan)

Poloxamer-Modified Montmorillonite Clay as Potential Antibacterial

Agent Against E. coli

Pao-Chi LIAO, Yi-Han Liao, Yung-Tang Nien (Nat. Cheng Kung U.,

Tainan)

Replacement Of Local Osteochondral Defects As Hybrid Bio-

Composite Jaroslav LISAL, Miroslav Petrtyl (Czech T.U>, Prague),

Zdenek Bastl (ASCR), Ladislav Senolt (Charles U., Prague), Zdenek

Krulis (ASCR), Pavel Cerny (Ortotika, Ltd. Czech Rep.)

Nano Technology Modification Of Natural Fibres For Bio-Composites

Dasong DAI, Mizi Fan (Brunel U., UK)

Shape Optimization Of Fiber In Biomaterials

Petr P. PROCHAZKA, Martin J. Valek (Czech T.U., Prague)

Use Of Acetylated Starches In Biodegradable Plastics And Composites

With Montmorillonite Petr DUCHEK, Jan Schubert (U. West Bohemia,

Czech Rep.)

Nanoscale Reinforcement Of Light Weight Bio-Based Foams Using

Rice Straw Nanofibers Chularat KRONGTAEW, Saniwan Srithongkham,

Lalita Vivitchanont. Siritorn Nakchamnan (Mahidol U., Nakorn Pathom,

Thailand)

Session 5e GENERAL 5

Tuesday 11:00AM-1:30PM Hongzhou room

Chairs: C.W. Lee, S.M. Mukhopadhyay, W. Nawrocki, C.H. Chen

Using Quality Tools to Reduce Surface Depression Defect on Composite

Panels M. Iqbal HUSSAIN, Zuraidah Mohd Zain, Khairul Bakhtiar b

Baharim (U. Malaysia Perlis)

Development Of Nanocomposite Mold Insert For Microfabrication Of

Polymeric Microfluidic Devices R.K. Jena, CheeYoon YUE, Y.C. Lam

(Nanyang T.U., Singapore)

Transparent Superhydrophobic Surface With Self-Cleaning Effect

Changwoo LEE, Kyungjun Lee, Sungnam Lyu, Sangmin Lee (Pohang

U.Sci.Tech., S. Korea),Youn Sang Kim, Woonbong Hwang (Seoul N.U., S.

Korea)

A Case Study On BIM Based Building Energy Evaulation

Sang-Tae NO (ChungJu Nat. U., S. Korea) Tues-Wed

Fiber-Optic Communication For Vehicles, Airplanes And Vessels

Jan LUBKOLL (Erlangen Friedrich-Alexander U., Germany), Otto Strobel

(Esslingen U. App. Sci., Germany)

Multifunctional Hybrid Structures for Energy and Environmental

Applications

Hema Vijwani, Adam Maleszewski, & Sharmila M. MUKHOPADHYAY

(Wright St.U., Dayton, OH) Mon-Wed

Towards The Quantum Limits In Scaling Of Electronic Devices

Waldemar NAWROCKI (Poznan U.T., Poland)

Glass Fiber Reinforced Vinyl Ester Containing Nano-Al2O3 Composites

for Pultrusion: Process Feasibility and Kinetic Analysis Chin-Hsing

CHEN (Chinese Culture U.,Taipei), Yun-Yun Sun (Tung Fang Design U.,

AOHSIUNG), Yih-Chern Juang (Chinese Culture U.)

1:30PM-2:30PM Lunch

Session 6a MATH 6

Tuesday 2:30PM-5:30PM Ballroom 1

Chairs: C.S. Chong, G.A. Chang, Y. Liang, F.

Boussu

Numerical Method for Calculating Load

Distribution in Multi-Bolt Thick Laminate

Joints W.X. Liu, Longquan LIU, R. Wei

(Shanghai Jiaotong U., China)

Response Of Beam Due To Impact Load

CheeSiang CHONG, Kameswara Rao N.S.V. (U.

Malaysia Sabah)

Free Vibration of Composite Plates Subjected

to Magnetic Field and Temperature Gradient

Ohseop SONG, Sung-Kyun Kim, Jong-Woon

Choi, Young-Jun Kim, Sang-Yun Park

(Chungnam N.U., Daejeon, S. Korea) Tues-Wed

Using Taguchi Method To Improve Composite

Materials Learning – MSU Example

Guanghsu A. CHANG (Minnesota St.U.,

Mankato)

Fluid-Structure Interaction Analysis Of

Pulsatile Flow In A Layered Anisotropic

Aortic Wall Ying LIU, Shuai Yang (Beijing

Jiaotong U., China)

Delamination Detection In Composite

Laminates By Ultrasonic Guided Wave

Yue LIANG (Penn St.U.), Fei Yan (FBS, St.Coll.,

PA), Cody Borigo, Joseph. L. Rose (Penn St.U.)

Degradation Measurement Of Fibrous

Reinforcement Inside Composite Material

Marie Lefebvre, Francois BOUSSU, Daniel

Coutellier (U. Lille Nord de France)

Session 6b MAGNETIC 4

Tuesday 2:30PM-5:30PM Ballroom 2

Chairs A. Lappas, A.E. Eken, D. Bhongsuwan, P.

Mueller-Buschbaum Pyroelectric Nano-Composite Thin Films

Shlomo BERGER, Nitzani (Technion, Israel) Mon-Wed

AB Initio Study Of Structural And Electronic

Properties Of InN/Si And GaN/Si Interfaces

Ilya V. MUTIGULLIN, K.K. Abgaryan (RAS, Moscow), D.I. Bazhanov (Moscow St.U.), O.V.

Stepanyuk (RAS)

Exchange Bias In Hybrid Nanocrystals Of Zinc

Oxide Alexandros LAPPAS (IESL-FORTH,

Heraklion, Greece), Athanasia Kostopoulou (IESL-

FORTH and U. Crete, Greece), Franck Thétiot (IESL-FORTH), Ioannis Tsiaoussis (Aristotle U.), Maria

Androulidaki (IESL-FORTH), Pantaleo Davide Cozzoli

(Inst. Nanoscience, Lecce, Italy). Mon-Wed

A Simulation Study On The Effects Of Nanotube

Anisotropy And Non-Straightness On The Electrical

Properties Of Carbon Nanotube/Polymer

Composites

Ali Erdem EKEN (TU Hamburg-Harburg, Germany),

E.J. Tozzi (UC Davis, Calif.), D.J. Klingenberg (U.

Wisconsin-Madison), W.

Effect Of Calcination Temperature In Production

Of Magnetic Nanoparticles For Arsenic Adsorption

Darunee BHONGSUWAN, Tripob Bhongsuwan,

Nucharee Chomchoey, Lakkana Boonchuay (Prince of

Songkla U., Thailand) Mon-Tues

Theory Of Electrostatic Interaction Between

Polymer-Coated Composte Particles

Hiroyuki OHSHIMA (Tokyo U. Sci, Japan)

Sol-Gel Templated Titaniumdioxide Films for Solar

Cell Applications Peter MUELLER-Buschbaum,

Monika Rawolle, Martin A. Niedermeier, Kuhu Sarkar, Philipp Lellig (Max-Planck, Mainz, Germany), Jochen

S. Gutmann (U. Duisburg-Essen)

Enhanced Optical Transparency In 3D

Nanostructured Films

Bernardo S. MENDOZA (CIO-Mexico), W. Luis Moch´an (ICF-UNAM-Mexico),Guillermo P. Ortiz

(Univ. Nac. del Nordeste, Argentina)

Session 6c INFRA 4

Tuesday 2:30PM-5:30PM Ballroom 3

Chairs: M.H. Baaghban, L. Feo, J.L. Wang,

S.J. Han

Bond Characteristic Of FRP Embedded In

Concrete For Retrofit Of Reinforced Concrete

Structure Soo-Yeon SEO (Chungju Nat.U., S.

Korea), Luciano Feo (U. Salerno, Italy), David

Hui (U. New Orleans) Tues-Wed

An Experimental Investigation on Internal

Hydrophobation of Cement Based Materials

Mohammad H. BAGHBAN, Per Jostein Hovde,

Stefan Jacobsen (Norwegian U. Sci. Tech.)

Environment-Assisted Subcritical Debonding

Of Epoxy-Concrete Interface

Jialai WANG, Chao Zhang, Ken Fridley (U.

Alabama, Tuscaloosa)

Estimation Of Nominal Moment Of

Reinforced Concrete Members Strengthened

With FRP Baik-Soon CHO, Young-Soo

Chung, Yeon-Wook Kim, Eunsoo Choi, Sangsoo

Jeon (Inje U., Gyeongnam, S. Korea)

Development of High-Performance Fiber-

Reinforced Cementless Composite Mortar

Hyun-Jin LIM, Chang-Geun Cho (Chosun U.,

Gwangju, S. Korea)

Seismic Strengthening of Reinforced Concrete

Columns by Applying Steel Fiber-Reinforced

Cementitious (SFRC) Mortar

Sung-Jin HAN, Chang-Geun Cho,Eui-Sik Kim

(Chosun U., Gwangju, S. Korea) Seismic Performance Improvement of RC Columns

by Applying High-Performance Fiber Cementitious

Mortar Chang-Hwan PARK, Chang-Geun Cho,

Jeong-Sup Kim (Chosun U., Gwangju, S. Korea, David Hui (U. New Orleans)

Influence Of Concrete Skin On De-Icing Salts

Resistance Pavel REITERMAN, Karel Kolar, Michaela Kostelecka, Ondrej Holcapek (Czech T.U.,

Prague)

Session 6d NANO 2

Tuesday 2:30PM-5:30PM Dalian Room

Chairs: C. Hin, Q.F. Chen, N. Daud, Y.L. Guo

Formation Of Oxide Nanoclusters In Nanostructured Ferritic Alloys

During Anisothermal Heat Treatment Celine HIN (Mass Inst Tech,

and UC Berkeley) , B.D. Wirth, J.B. Neaton (UC Berkeley, Calif.)

INVITED 25 min

Synthesis And Photocatalytic Activity Of Carbon Nanomaterials Based

CDSE Composites Mingliang CHEN, Zeda Meng, Lei Zhu, Wonchun Oh

(Hanseo U., Seosan-si, S. Korea)

Facile Preparation Of Graphene/Poly(Butylene Succinate)

Nanocomposites With Enhanced Behaviors Yuan HU, Lei Song, Xin

Wang (U. Sci.Tech. of China, Hefei, Anhui)

Issues about Strength of Nanofiber Reinforced Composites Quanfang

CHEN (U. Cen. Florida, Orlando)

Design, Preparation, Performance, Industrialization And Application

Of Advanced Clay/Rubber Nanocomposites Liqun ZHANG, Youping

Wu, Yiqing Wang, Yonglai Lu, Ming Tian (Beijing U. Chem. Tech., China)

Glass Transition Temperature And Structural Relaxation Of Polymer

Nanoparticles Under Soft And Hard Confinement Yunlong GUO,

Chuan Zhang, Christine Lai, Rodney Priestley (Princeton U., NJ) Mon-Wed

Carbon Nano Coil Synthesized On Zero-Dimensional Silica Huy-Zu

CHENG, Chang-Cheng Su, Tin-You Chen, Guo-Ju Chen, Kuo-Jung Lee (I-

Shou U., Kaohsiung)

Session 6e GENERAL 6

Tuesday 2:30PM-5:30PM Hangzhou Room

Chairs: P. Bele

Session on Novel Catalysts and Support Materials for Fuel Cells

developed by Petra Bele (TU Munich, Garching, Germany) Synthesis, Structure, and Reactivity of Dealloyed Bimetallic PtM3 Fuel Cell

Cathode Electrocatalysts Mehtap Oezaslan, Stefan Rudi (TU Berlin, Germany),

Zengcai Liu (Oak Ridge N.L., TN), Peter STRASSER (TU Berlin, Germany, Oak

Ridge N.L., TN) Tues-Fri

Behaviour of Core Shell Nanoparticle Catalysts in the PEMFC Environment

Sarah BALL (Johnson Matthey Tech., Sonning Common, UK)

Synthesis And Characterization Of Nanocatalysts For The Direct

Electrooxidation Of NaBH4 In A Solid Alkaline Membrane Fuel Cell

Christophe COUTANCEAU, M. Simoes, S. Baranton (U. Poitiers, France)

Graphene Composites as the Cathode Catalyst for Oxygen Reduction in Fuel

Cells Xiaoyan Yan (Tauyuan U. Sci. Tech., China), Xili Tong, Yingyong Wang,

Guoqiang Jin, Xiangyun GUO (G.U. Chinese Academy of Sciences, China)

Functionalized Carbon Nanotubes And Anode Degradation In High

Temperature PEM Fuel Cells A. Orfanidi, M.K. Daletou, S.G. NEOPHYTIDES

(Hellas Inst., Patras,Greece)

Alternative Support Materials And The Role Of The Support Morphology For

The Electrode Structure S. Zils (TU Darmstadt, CRP Henri Tudor, Luxembourg),

P. Bleith, F. Ettingshausen (TU Darmstadt), J. Suffner (TU Darmstadt, KIT

Karlsruhe, Germany), A. Wolz , M. Michel (CRP Henri Tudor, Luxembourg), Christina ROTH (TU Darmstadt, KIT Karlsruhe, Germany)

Nano-Sized Perovskite-Type Oxide / Carbon Nanotube Composites For An

Oxygen-Reducing Electrocatalyst Kohei MIYAZAKI, Tomokazu Fukutsuka, Takeshi Abe, Zempachi Ogumi (Kyoto U., Japan)

Metal-Oxide Based Supports For Electrocatalysis In Proton-Exchange

Membrane Fuel Cells Frederic MAILLARD, F. Micoud (Grenoble-INP, France), A. Bonnefont (U. Strrasbourg, France), M. Chatenet (Grenoble-INP, France)

The Effect Of Metal Oxide-Carbon Support On Electrocatalysts For Fuel Cell

Reactions B. Ruiz-Camacho (U. Poitiers, France), M.A. Valenzuela (ESIQIE, Mexico), Nicolas ALONSO-VANTE (U. Poitiers, France)

Degradation Studies of OMC Supported Pt Electrocatalyst for PEMFC

Application In Acid Electrolyte Juqin ZENG, Carlotta Francia, Stefania Specchia, Paolo Spinelli (Politec Torino, Italy)

Nano-Electrocatalysts Based On Carbon Nitride Supports For The Orr And For

In Pem Fuel Cells Vito DiNOTO, Enrico Negro (U. Padova, Italy) POSTER

Session 7a MATH 7

Tuesday 6:00PM-9:00PM Ballroom 1

Chairs: D. Jia, S. Lin, A. Boczkowska, Z. Chen

Effect Of Porosity On The Mechanical

Properties Of YSZ/NiO Composite Anode

Materials Dan JIA, Aixi Zhou (U. North

Carolina-Charlotte),Yang Ling, Ke An, A.D.

Stoica,Xun-Li Wang (Oak Ridge N.L., TN)

Mechanical Characterization And Finite

Element Modeling Of NBR And PDM For

Directional Drilling Henry K. GONZALEZ,

Jianren Zhou, Shield Lin

(Prairie View A&M U., TX)

Shape, Displacement And Strain

Measurements By Sampling Moire Method

Yoshiharu MORIMOTO (Moire Inst. Osaka,

Japan), Motoharu Fujigaki, Akihiro

Masaya(Wakayama U., Japan) INVITED 25 min

Thermal Stability Analysis Of Tapered Fgm

Annular Plates Under Nonuniform

Temperature Distribution- A Finite Element

Approach Mansour Mohieddin Ghomshei,

Vahid Abbasi (Islamic Azad U., Iran)

Effect Of The Microstructure On The

Properties Of Ceramic–Elastomer Composites

With 3D Connectivity Of Phases

Anna BOCZKOWSKA (Warsaw U.T., Poland)

Thermomagnetoelastic Behavior Of A

Rotating Functionally Graded Hollow

Cylinder Zengtao CHEN, A. Hamid Akbarzadeh

(U. New Brunswick, Canada)

The Effect Of Stoichiometric Ratio Of Curing

Agent On The Mechanical Properties Of

Epoxy Resins Peng WANG, Gang Sui,

Xiaoping Yang (Beijing U. Chem Tech.,China)

Session 7b METAL 2

Tuesday 6:00PM-9:00PM Ballroom 2

Chairs: P.F. Mensah, Q.H. Xu, J.H. Lee, J.Y. Jin

Mechanical Properties Of Hot Corrosion

Tested APS And EB-PVD Multilayer Thermal

Barrier Coatings Using Nano Indentation

Ravinder M. DIWAN, Patrick F. Mensah, Naresh

Polasa (Southern U., Baton Rouge, LA), Douglas

E. Wolfe (Penn St.U.) Mon-Tues

Coupled Metal Nanoparticles with Enhanced

Optical Properties and Their Applications

Zhenping Guan, Polavarapu Lakshminarayana,

Cuifeng Jiang, Qing-Hua XU (Nat. U. Singapore)

Properties Of Tin Thin Films Deposited Onto

β-TYPE Ti-14Mo-3Mb-3Al-0.2Si Alloy

Substrates At Various Processing

Temperatures By Reactive Magnetron

Sputtering Jun Hee Lee, A. Joseph Nathanael,

Sun Ig Hong (Chungnam Nat. U., Daejeon, S.

Korea) Mon-thurs noon

Creep deformation behaviors of Zr-Nb-Sn-Fe

alloy tubes Jong-Min LEE, Eun-Kyu Lee and

Sun Ig Hong (Chungnam Nat. U., Daejeon, S.

Korea) Mon-thurs noon Mechanical and Microstructural Analyses of Cu-

15at% Ag Nanocomposite Processed By High

Pressure Torsioning KiHwan OH, HoByung Kim,

SunIg Hong (Chungnam Nat. U., Daejeon, S. Korea)

Mon-thurs noon

Nanotubes Formation on Ti-6Al-4V and Zr-1Nb

Alloys Through Anodization And Its

Biomineralization Analysis Ju-Young JIN, A.J. Nathanael, S.I. Hong(Chungnam Nat. U., Daejeon, S.

Korea) Mon-thurs noon

Effect Of Alloying On The Deformation Behavior

And Slip Mode Of Cu-16at%Al Single Crystals At

Various Temperatures JongSu HA, SunIg Hong

(Cheungnam Nat. U., Daejeon, S. Korea) Mon-thurs noon

Microstucture and Mechanical properties of

Cu-Ni-Zn/Cu-Cr/Cu-Ni-Zn Processed by

HPT (High Pressure Torsioning) Ho-byung

KIM, Ki-Hwan Oh, Sun Ig Hong (Cheungnam

Nat. U., Daejeon, S. Korea) Mon-thurs noon

Session 7c COMPOSITES 1

(miscellaneous) Tuesday 6:00PM-9:00PM Ballroom 3

The Evaluation Of Mechanical And Thermal

Properties Of Blended Cement Concrete XiaoYong WANG, HyeongKyu Cho, HanSeung

Lee (Hanyang U., Ansan, S. Korea)

A Study On The CO2 Balance Evaluation Of

Building And Civil Engineering Structures HyeongKyu CHO, Hun Song, HanSeung Lee

(Hanyang U., Ansan, S. Korea)

Study On Estimating Compressive Strength

And Physical Characteristic Of Structural

Lightweight Concrete With Foam Agent TaeBeom MIN, Hanseung Lee (Hanyang U.,

Ansan, S. Korea), Luciano Feo (U. Salerno,

Italy), David Hui (U. New Orleans)

Detection and Characterization of Kissing

Debonds in Composite Adhesive Joints using

Digital Image Correlation

R L Vijaya KUMAR, C R L Murthy, M R Bhat

(Indian Inst.Sci., Bangalore)

Selective Encapsulation of Dye Molecules in

Dendrimer/Polymer Multilayer Microcapsules

by DNA Hybridization Chuan-Liang FENG,

Qinglei Liu, Wang Zhang, Jiajun Gu, Shenmin

Zhu, Di Zhang (Shanghai Jiao Tong U., China)

Development Of Radiation Shielding Concrete

Utilzing Electronic Arc Furnace Oxidizing

Slag Heeseob LIM, Hanseung Lee, Jaeseok

Choi (Hanyang U., Ansan, S. Korea)

Electrospun Nanofibers For Artificial

Scaffolds And Reinforcement Of Rubbers

Ulrike Wangenheim, Ulrich Giese, Robert H.

SCHUSTER (DIK, Hannover, Germany)

Session 7d NANO 3

Tuesday 6:00PM-9:00PM Dalian Room

Chairs: J.M. Bai, M. Auslender, C. Harishkumar, S.V. Roth

Processing and Characterisation of a Polyamide 12-Carbon Nanotube

Composite by Laser Sintering Jiaming BAI, Ruth Goodridge, Richard

Hague, Mo Song (Loughborough U.,UK)

Optical Properties of Silica Opal Templates in the Visible and Infrared

Mark AUSLENDER, Shlomo Hava (Ben-Gurion U., Israel)

Atomic Layer Deposition and Template Replication for

Nanotechnology Engineering Diefeng GU, Gon Namkoong, Helmut

Baumgart (Old Dominion U., Norfolk, VA)

Comparing The Effect Of Nano-CaCO3 And Nano-ZnO On

Rheological Properties Of Polypropylene Using Several Models

Hassan EBADI-Dehaghani (Islamic Azad U.,Iran)

Multifunctional and Specific Interactions of MWCNT and Polymer As

Decisive Parameters For High Performance Of Nanocomposites

Chougule HARISHKUMAR,Ulrich Giese, Robert H. Schuster (DIK,

Hannover, Germany) In Situ µGISAXS Investigation of Gold Sputter Deposition onto Mesoporous

Polymer Templates. Matthias SCHWARTZKOPF, Adeline Buffet (DESY,

Hamburg,Germany), Volker Koerstgens (TU Muenchen), Kai Schlage, Jan

Perlich,Andre Rothkirch (DESY), Gunthard Benecke (DESY), Ezzeldin Metwalli (TUMuenchen), Mottakin M. Abul-Kashem, Gerd Herzog (DESY), Peter Mueller-

Buschbaum (TU Muenchen), Ralf Roehlsberger, Rainer Gehrke, Stephan V. Roth

(DESY, Germany)

Tailoring Functional Polymer-Metal Nanocomposites Via Sputter Deposition

Stephan V. ROTH, Adeline Buffet, Mottakin Abul Kashem, Gunthard

Benecke,Rainer Gehrke, Gerd Herzog (DESY, Hamburg, Germany), Volker Koerstgens (TU Muenchen), Jan Perlich (DESY), Monika Rawolle (TU Muenchen),

Ralf Roehlsberger, Andre Rothkirch, Kai Schlage, Matthias Schwartzkopf

(DESY),Peter Mueller-Buschbaum (TU Muenchen)

Nanoindentation Behavior of Naturally Layered Materials

Jianhong Zhang (Tsinghua U., China), Zhongxin Wei, Guoping Zhang (Louisiana

St.U.)

Session 7e GENERAL 7

Tuesday 6:00PM-9:00PM Hangzhou Room

Chairs: M.C.S. Ribeiro, M. Zou, M. Ghatus, H. Wong

Monolayer Molecular Doping For Cost-Effective Photovoltaics

Fei XIU (City U. Hong Kong, China), Miao Yu (Hong Kong UST), Johnny

C. Ho (City U. Hong Kong), Zhiyong Fan (HKUST)

Synthesis and Characterization of Cathode Material for Li-ion

Batteries Umair NISAR, Q.J. Khattak (GIK Inst., Topi, Pakistan), Mohsin

Saleem, R.A. Shakoor (KAIST, DAejeon, S. Korea), Ali Hussiana,

F.A.Khalid (GIK)

Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential

Application for Micro Surface Mounted Components Awad Kh. Al-

ASMARI (AlKharj U., Saudi Arabia)

Experimental Study On Polyester Based Concretes Filled With Glass

Fibre Reinforced Plastic Recyclates -A Contribution To Composite

Materials SustainabilityM.C.S. RIBEIRO, A. Fiuza, M.L. Dinis (U. Porto,

Portugal), A.C.M. Castro, F.G. Silva, J.P. Meixedo, M.R. Alvim (Polytech.

Porto, Portugal)

Tribological Properties of Quantum Dot/PMMA Nanocomposite Films

Min ZOU, Alex Arguelles (U. Arkansas, Fayetteville), Y. Andrew Wang

(Ocean NanoTech, Springdale, AR)

Experimental Investigation of the Performance of Fiber Reinforced

EPDM for Automotive Radiator Hoses Mehdi GHATUS (Lawrence

T.U., Southfield, MI), Chris Kargula (Auburn Hills, MI), Chris Riedel

(Lawrence T.U.)

Preparation Of Dielectric Embedded Silicon Nanocrystallites For Flash

Memory Applications H. WONG, O.Y. Wong, J. Liu (City U., Hong

Kong, China)

Special Technology For Industrial Production Of Sandwiches From

Metals Mark R. LIBERZON (Moscow St. Aviation T.U., Russia)

Session 8a MATH 8 Wednesday 8:00AM-10:30AM Ballroom 1

Chairs: R. Mohan, S. Zhou, G. Li

Precipitation In Alloys: A Kinetic Monte Carlo

And Class Model Study

David BOMBAC, Goran Kugler (U. Ljubljana,

Slovenia)

Modeling And Analysis Of Dynamic Crack

Propagation In A Nanoscale Bi-Layer Metallic

Composite Ram Mohan, Yojna Purohit (NCAT,

Greensboro, NC)

Buckling And Postbuckling Behavior Of

Laminated Stringer Stiffened Composite

Cylindrical Panels Haim ABRAMOVICH

(Technion, Israel)

Monte Carlo Simulation Of Defects In Hard-

Sphere Crystal Grown On A Squsre Pattern

Atsushi MORI, Yoshihisa Suzuki, Shigeki

Matsuo (U. Tokushima, Japan)

Characterization Of Fluid Dynamic

Properties Of Schwarz’s Primitive Cellular

Materials Che-Cheng Chang, Shewei ZHOU,

Yuhang Chen, Qing Li (U. Sydney, Australia)

On Particle Impact Induced Bond Breaking

Of Single-Walled Carbon Nanotubes

Puroorava Chakravarthy, Gang LI (Clemson U.,

SC)

An Experimental Metodology And

Apparatuses To Perform Impact Tests In

Composite Laminate Plates Eduardo

Henrique deCASTRO Biase, Mauricio Vicente

Donadon

(Sao Jose Campos, Brazil)

Session 8b METAL 3

Wednesday 8:00AM-10:30AM Ballroom 2

Chairs: H.B. Kim, Y.T. Liu, D. Sebayang,

M. Suszynska

Effect of Interfacial Reaction Layer On The

Cracking Behavior in 3-ply Mg/Al/STS Clad-

Metal In-Kyu KIM, Jun-Young Song, SunIg

Hong (Cheungnam Nat. U., Daejeon, S. Korea)

Mon-thurs noon

Oxidation and Mechanical Properties of Zr-

1Nb-1Sn-0.1Fe Alloys At High Temperatures

EunKyu LEE, JongMin Lee, SunIg Hong

(Cheungnam Nat. U., Daejeon, S. Korea)

Mon-thurs noon

The Improvement Of Oxidation Behavior Of

Powder Metallurgy Made Fe-Cr Alloys

Yen-Ting Liu, Shuang-Shii LIAN (Nat. Taiwan

U., Taipei), Wei-Ja Shong, R.Y. Lee (INER)

Structure And Hardness Of Copper-Doped

Soda-Lime Silica Glass

Maria SUSZYNSKA (PAS, Wroclaw, Poland)

Control Of Structure And Properties Of

Welded Connections Of Medium Alloy Steels

By Application Highly Concentrated Pulse

Energy Actions A.A. DEMYANCHENKO, Yu

N. Saraev (RAS, Tomsk, Russia)

Adaptive Pulse Technological Processes Of

Welding And Pad Weld Is A New High-

Performance Method Of Obtaining Of

Permanent Joints Of High-Strength Steels

Yu N. SARAEV (RAS, Tomsk, Russia)

The Improvement of Oxidation Behavior of

Powder Metallurgy Made Fe-Cr Alloys

Yen-Ting LIU, Shuang-Shii Lian (Nat. Taiwan

U., Taipei), Wei-Ja Shong, R.Y. Lee (Inst.

Nuclear Energ Res.) Effect Of Heat Treatment On The Mechanical

Response And Fracture Behavior In STS304/Al1050/STS439 Clad Material Jun-Young

SONG, In-Kyu Kim, Sun Ig Hong (Chungnam Nat. U.,

Daejeon, S. Korea) Mon-thurs noon

Session 8c CHEM 3

Wednesday 8:00AM-10:30AM Ballroom 3

Chairs: A. Mori, K. Nakane, M. Kikuchi

Z. Zhuang

Session on Materials Chemistry

developed by Atsusi Mori (TokushimaU., Japan)

and Masanori Kikuchi (NIMS, Japan)

Formation And Properties Of Poly(Vinyl

Butyral)-Zirconia Hybrids Koji NAKANE,

Kosuke Mizutani, Ruonan Zhang, Nobuo Ogata

(U. Fukui, Bunkyo, Japan)

Step Velocity On The {110} Faces Of

Tetragonal Lysozyme Crystals Under High

Pressure Takahisa FUJIWARA, Yoshihisa

Suzuki (U. Tokushima, Japan), Gen Sazaki

(Hokkaido U., Japan), Shin-ichiro Yanagiya,

Katsuhiro Tamura (U. Tokushima) Microfluidic Fabrication Of Colloidal Crystal Films

And Spheres Toshimitsu KANAI (Yokohama Nat. U.,

Japan) INVITED

Enlargement Of Grains Of Silica Colloidal Crystals

By Centrifugation With An Inverted-

Triangle Shaped Container KaoriHASHIMOTO,

Yoshihisa Suzuki, Atsushi Mori, Shin-ichiro Yanagiya,

Katsuhiro Tamura (U. Tokushima, Japan)

Observation Of Mobile Lattice Defects In A

Colloidal Crystal Makiko SAKABE, Yoshihisa

Suzuki, Takahisa Fujiwara, Atsushi Mori, Shin-ichiro

Yanagiya, Katsuhiro Tamura (U. Tokushima, Japan)

Preparation Of Injectable Artificial Bone

Fabricated From Hydoxyapatite / Collagen

Nanocomposite Akinori Kochi (Okayama U., Japan), Masanori KIKUCHI (NIMS, Tsukuba, Japan), Yuki

Shirosaki, Satoshi Hayakawa, Akiyoshi Osaka

(Okayama U., Japan)

Fabrication Of Calcium-Phosphate Cements From

Hydroxyapatite Powders Surface-Modified With

Various Concentrations Of Sodium Inositol

Hexaphosphate And Their Material Properties

Toshiisa KONISHI, Minori Mizumoto, Michiyo

Honda(Kanagawa Acad Sci Tech., Japan), Zhi Zhuang, Mamoru Aizawa (Meiji U., Japan)

Ultrastructural Analysis Of Synthetic

Hydroxyapatite With Preferred Orientation To C-

Plane Using High-Resolution Transmission Electron

Microscopy Zhi ZHUANG, Mamoru Aizawa (Meiji

U., Japan)

Session 8d TEXTILE 2

Wednesday 8:00AM-10:30AM Dalian Room

Chairs: Y.Q. Wang, H. Zulkafli, G. Rizvi, T. Ai

Mechanical Properties of Carbon Fabric-Phenolic Resin Composite

Using Carbon Nanotubes Yi-qi WANG, Joon-hyung Byun, Cheon Won,

Zhi-peng Hui, Jung-il Song (Changwon N.U., S. Korea)

Rubber Toughening Of Polylactic Acid Mohd BIJARIMI, A. Sahrim, R.

Rasid (U.Kebangsaan, Malaysia), H. Zulkafli(U. Malaysia Pahang)

Nanoindentation Characteristic of Nanoclay/ Rubber Toughened-UPE

Nanocomposite. S.N SURIP (U.T. MARA, Shah Alam, Malaysia), Z.Y

Zhang, H.N. Dhakal (U. Portsmouth, UK), N.N. Bonnia (U.T. MARA)

Properties Enhancement of PLA-Natural Fibre Composites Using An

Ethylene Copolymer Maryam Talimi, Ghaus RIZVI (Univ.Ontario Inst.

Tech.,Oshawa,Canada) Mon-Wed PM

A Simple Constitutive Model For Plain-Woven C/SiC Composites

Jun LI, Guiqiong Jiao, BoWang,ChengpengYang, Shifei Liang

(Northwestern Polytech.U., Xi’an, China)

Prediction Of Kink Band Formation In 3D Textile Glass Fiber

Composites Using A Multi-Scale Modeling Strategy

Dianyun ZHANG, Anthony M. Waas (U. Michigan), Chian-Fong Yen, Seth

Ghiorse (US Army. Aberdeen P.G., MD)

Modeling The Stress-Strain Behavior Of Triaxially Braided

Composites Xinran XIAO, Christopher Cater (Michigan St.U.)

Effect Of Surface Modification Of Kevlar Stitch Threads On

Interfacial Hydrothermal Properties Of Carbon Fiber Reinforced

Epoxy Stitched Composites Tao AI (Chang'an U., Xi'an, China), Rumin

Wang (Northwestern Poly U., Xi'an, China), Jie Deng (Aerospace Comp.

Mat. Res. Inst., Xi'an, China)

Session 8e GENERAL 8

Wednesday 8:00AM-10:30AM Hangzhou Room

Chairs: O. . Zheng, Strobel, J. Lu, R. Artiaga

session on Optical And Related Microwave Communication

developed by Otto Strobel (Esslingen U. App. Sci., Germany) Wed-Thurs

Optical And Microwave Communication Using New Materials – An

Overview Otto STROBEL, Elke Dietrich (Esslingen U. App Sci,

Germany), Jan Lubkoll(Erlangen Friedrich-Alexander U., Germany)

Fiber-Optic Communication For Vehicles, Airplanes And Vessels

Jan LUBKOLL (Erlangen Friedrich-Alexander U., Germany), Otto Strobel

Development Of A Correlation Speed Measurement For Automotive

Applications Christian BETZ (Esslingen U. App. Sci., Germany),

Vladimir V. Rastorguev (Moscow Aviation Inst., Russia), Otto Strobel

Enhancing Modern Mobile Communication Systems Using Tunable

Components Made Of Material Utilized In New Fields Of Application

Kira KASTELL (U. App. Sciences, Frankfurt, Germany)

Nanomaterials for Tunable Passive Microwave Devices Yuliang

ZHENG, A. Gaebler, M. Koeberle, R. Jakoby (T.U. Darmstadt, Germany)

The Complex Permittivity And Permeability Of PMMA/Fe3O4 NPS/Ag

NPS Composites In The Microwave Range WenHsien Sun (Ind.Tech

Res. Inst.Hsinchu), DungShing HUNG (Ming Chuang U., Taipei), Tsing

Tang Song (ITRI, Hsinchu), Shang Fan Lee (Academia Sinica, Taipei)

Using Microwave Transmission to Detect Decay in Wood

Graham BRODIE, Berhan Ahmed (U. Melbourne, Australia), Mohan V.

Jacob(James Cook U., Australia)

Temperature Modulation In Pressure DSC: A New Tool To Investigate

The Pressure Effect On The Curing Ramon ARTIAGA, Carlos Gracia,

Jorge LOpez-Beceiro, Silvia Gomez-Barreiro, Javier Tarrío-Saavedra

10:30AM-11:00AM Coffee Break

Session 9a MATH 9

Wednesday 11:00AM-1:30PM Ballroom 1

Chairs: Y. Hong, J.S. Song, Y. Feng, B.P. Ronge

Identifying Material Properties Of Composite

Materials From Vibration Data

Zubaidah Ismail (U. Malaya, Kuala Lumpur),

Henry Khov, Wen L. LI (Wayne St.U., Detroit,

MI)

Divergence Of Composite Aircraft Wings

Accounting The Aerodynamic Finite-Span

Effect Yan HONG, Zhanming Qin (Xi’an

Jiaotong U., China)

Nonlinear Dynamics And Vibrations For

Geometrically Nonlinear Composite Aircraft

Wings Ji-seok SONG, Hwanhee Lee, Seog-Ju

Cha, Sungsoo Na (U. Korea, Seoul),Zhanming

Qin (Xi’an Jiaotong U., China)

Internal Resonance Of Composite Sandwich

Panels With Transversely Compressible Core

Yizhe FENG, Zhanming Qin, Guiping Zhao

(Xi’an Jiaotong U., China)

Numerical Study Of Scale Effects On The

Delamination Of Laminates Under Low-

Velocity Impact Yajun Chen, Zhefeng YU, Hai

Wang (Shanghai Jiaotong U., China)

Optimization Of Drilling Conditions Of Glass

Fibre Reinforced Plastic Composite Material

Using Genetic Algorithm N.S. MOHAN,

Jagannath K, S.S. Sharma, Chandrashekar Bhat

(Manipal Inst.Tech.)

Performance of Thin Walled Composite

Beams with Stochastic Properties under

Matrix Cracking Damage Babruvahan P.

RONGE, Prashant M. Pawar (Pandharpur)

Session 9b MAGNETIC 5

Wednesday 11:00AM-1:30PM Ballroom 2

Chairs: W.Q. Huang, H.X. Zhang, K.R. Shin,

K.M. Lee, Nitrogen or Oxygen Bonds Passivating on Surface of

Si Quantum Dots Formed by Nanosecond Pulse

Laser Wei-Qi HUANG (Guizhou U., Guiyang,

China),Shi-Rong Liu (CAS, Guiyang, China), Quan Lü (Guizhou U.), Chao-Jian Qin (CAS, Guiyang)

Extrinsic-To-Intrinsic Transition And Sign Changes

of Seebeck Coefficients for PbTe Nanocrystals

Wenwen ZHOU, Wenjing Zhang, Jan Ma, Qingyu Yan

(Nanyang U., Singapore)

Electrical Properties Of Few-Layer Boron Nitride

Hongxin ZHANG, Peter X. Feng (U. Puerto Rico)

Ultrasonic Characterization for Electronic

Package’s Micro-structure Chunguang XU, Zhongzhu Liu, Xinyu Zhao, Bolong Men (Beijing I.T.,

China)

Simulated Body Fluid Evaluation Of Titanium

Oxide Layers Exhibiting Different Morphologies

Formed By Electrochemical Plasmacoating Process

Ki Ryong SHIN, Kang Min Lee, You Chan Jung

(Hanyang U., Ansan, S. Korea),Young Gun Ko

(Yeungnam U.), Dong Hyuk Shin (Hanyang U.)

Synthesis Of Cobalt/Gold Bimetallic Hollow

Microspheres And Its Optical Properties

Cheng-Seong KHE, Azizan Aziz, Zainovia Lockman

(U. Sains Malaysia, Penang)

Combination of Micro-Fluidics and Sol-Gel

Templating for Nanostructuring of Titania Thin Films for Photovoltaic Application Monika RAWOLLE, Matthias A. Ruderer, Stefan M. Prams, Qi

Zhong, David Magerl (TU Muenchen, Germany), Jan

Perlich,Stephan V. Roth (HASYLAB at DESY, Hamburg), Philipp Lellig (MPI-P, Mainz), Jochen S.

Gutmann (U. Duisburg-Essen), Peter Müller-Buschbaum (TU Muenchen)

Electrochemical Response Of ZrO2-Mgo Layer On

Mg Alloy Via Plasma Electrolytic Oxidation

Followed By Annealing Treatment KangMin LEE,

Byung Uk Lee, InJun Hwang (Hanyang U., Seoul, S.

Korea), Young Gun Ko (Yeungnam U., S. Korea),

Dong Hyuk Shin (Hanyang U.)

Session 9c INFRA 5

Wednesday 11:00AM-1:30PM Ballroom 3

Chairs: M. Fan, H.B. Shim, T.J Cho, K.B. Kim

High Strength Natural Fibre Composites for

Construction Mizi FAN (Brunel U., UK)

Induced Size Effects Of Gd3+ Ions Doped

NiZn Ferrite Nanoparticles

Balwinder KAUR (Jammu, India), Manju Arora,

A.K. Srivastava, R.P. Pant (New Delhi, India)

Experimental Study for Performance

Evaluation of Large Double Head Studs in

High Strength Concrete HakBo SHIM, Sung

Hun Jang, JooHo Lee, HyoSeon Park (Lotte

Res.Dev. Inst., S. Korea)

Air Permeability Test Of Concrete Tube

Structures With Joints

Joonam PARK, Lee-Hyeon Kim, Seong-Won

Nam (Korea Railroad Res.Inst., Kyunggi)

Fire Resistance Properties of Hybrid Fibers

Reinforced High Strength Concrete

JeongSup KIM, CheolHee Cho, MyungHwan

Yoo, JaeHwan Kim, ChangGeun Cho,YoungSuk

Shin (Chosun U., Gwangju, S. Korea)

A Study For The Changes Of The Micro

Structure By Deterioration Factors For NPP

Concrete Structures KiBeom KIM, Do

Gyeum Kim, Ho Jae Lee, Jang Hwa Lee, (Korea

Inst Construct. Tech., Gyeonggi)

Carbon Composites in Light Weight Design of

Next Generation Benefits of Mechanical

Fastening and Ways to Increased Economy

Christoph Friedrich, Thomas Gerlard (University

of Siegen, Germany)

Session 9d BIO 3

Wednesday 11:00AM-1:30PM Dalian Room

Chairs: M. D. MASHITAH, C. Gadau, R.E. Mackay, T.N. Lien Truong,

L.H. Tong

Schizophyllum commune As Nano-Factory For Biosynthesis Of Silver

Nanoparticles Mat Don MASHITAH, Yen San, Chan (U. Sains Malaysia)

Silver Nanoparticles Based Materials For Antimicrobial Treatment Of

Medical Leathers And Sheepskins Carmen GAIDAU (Leather &

Footwear R.I., Bucharest, Romania), Aurora Petica (INCDIE, Bucharest,

Romania), Wuyong Chen (Sichuan U., Chengdu, China, Lucretia Miu

(Bucharest, Romania)

Fabrication And Micromechanical Testing Of Polymer Micro-Grippers

With Compliant Force Sensing Ruth E. MACKAY (U. Dundee, UK),

H.R. Le (U. Plymouth,UK), L. Zhang (U. Dundee)

Promising Materials Made Of Bio-Hybrid Polyurethane

Ernie Suzana ALI (U. Sains Islam Malaysia), Sahrim Hj Ahmad, Syazana

Ahmad Zubir (Int. U. Malaysia, Selangor)

Sensitive Label-Free Impedimetric Immunosensor Based On

Polypyrrole For Human Chorionic Gonadotropin Hormone Detection

T.N. Lien TRUONG (Hanoi U.T., Vietnam), Miyuki Chikae, Yoshiaki

Ukita, Yuzuru Takamura (JAIST, Ishikawa, Japan) chair Liposome As A Drug Carrier System For Different Active Substances

Mont Kumpugdee-VOLLRATH, Hilal Bilek (U. App. Sci, Berlin, Germany)

Engineering Of Concentrated Emulsions As A Drug Carrier System For

Pharmaceutical Application Lihong TONG, Mont Kumpugdee-Vollrath, Jens-

Peter Krause (U. Applied Sciences, Berlin, Germany), Pornsak Sriamornsak

(Silpakorn U., Nakhon Pathon, Thailand)

Surface Roughness Evaluation Of Experimental Dental Nanocomposite After

Bleaching Dasmawati MOHAMAD, Zuryati Ab Ghani, Ooi Qian Qian, Zaid

Hameed, Mohammed Ali (U. Sains Malaysia, Kelantan)

Beta Casein Nanovehicles For Targeted Oral Drug Delivery – Towards

Treatment Of Gastric Cancer Alina SHAPIRA, Irit Davidson, Noa Oron, Yehuda

Assaraf, Yoav D. Livney (Technion, Israel I.T.) Tues-Wed

Session 9e GENERAL 9

Wednesday 11:00AM-1:30PM Hangzhou Room

Chairs: G.VanAssche, C.M. Gomez, S.F. Leung, H. Zimmermann

Studies On Polymer-ZnO Nanowires Composites For Gas Sensing

Application Shiv Kumar GUPTA, Niranjan Ramgir, Manmeet Kaur,

Niyanta Datta, Vibha Saxena, Aditee Joshi, Ajay Singh, Dinesh Kumar

Aswal (Mumbai, India)

Relations Between Phase Diagram, Kinetics Of Thermal Annealing

Process, And Morphological Stability In Polymer:Fullerene Blends For

Bulk Heterojunction Solar Cells Guy VanASSCHE, F. Demir, B. Van

Mele (Vrije U. Brussel, Belgium), J. Manca, D. Vanderzande (Hasselt U.,

Diepenbeek, Belgium)

Rheological Behavior Of Epoxy-Amine Systems Modified By Sepiolite

Clara M. GOMEZ (U. Valencia, Spain), Andres Nohales (Castellon, Spain),

Paula Felix (U. Valencia)

Design & Development Of ‘Programmable Transceiver Controller (A

Nanotechnology Device)’ For Wimax/Wifi Wireless Communication.

S. Devendra K. VERMA, P. K. Barhai (Birla I.T., India)

Optical Absorption Of Three-Dimensional Nanoporous Structures

SiuFung LEUNG, Qingfeng Lin, Miao Yu (Hong Kong U.S.T.,China),

Kyungmok Kwon (KAIST, S. Korea), Yunze Long (HKUST), Kyoungsik

Yu (KAIST), Zhiyong Fan (HKUST)

Advanced Dispersion Strategies And Property Design For CNT/Rubber

Nanocomposites Heike ZIMMERMANN, Robert H. Schuster (Hannover,

Germany)

Polymer Matrix Composites Exhibiting Ultra-High Thermal

Conductivity Greater Than 500 W/M-K Jyh-Ming TING (Nat. Cheng

Kung U., Tainan) INVITED 25 min

1:30PM-2:30PM LUNCH

Session 10a MATH 10

Wednesday 2:30PM-5:30PM Ballroom 1

Chairs: L.P. Ding, S.Y. Xing, J. L. Urrutia,

L.L. Peng

Fuzzy Logic based Matrix Crack Detection in

Thin-walled Composite Beam under Material

and Fabrication Uncertainties Prashant M.

PAWAR, Babruvahan P. Ronge

The Study On A Numerical Controlled Multi-

PinsInserting System For Z-Pinned Composite

Laminates Preparation Liping.DING,

Junwei.Qi, Biao.Yan, Jun.Xiao, Liwei.Wen

(NUAA, Nanjing, China)

Mathematical Modeling For Single-Walled

Carbon Nanotubes (SWCNTs) Based On

Magneto-Electro-Elastic Beam Model Mei-

Feng LIU, Tai-Ping Chang(I-Shou U.,

Kaohsiung)

The Influence Of Incorporation Of Pulp And

Paper Mill Secondary Sludge In Urea-

Formaldehyde Resin On Mechanical And

Physical Properties Of Particleboard Panels

Suying XING, Bernard Riedl (U. Laval, Canada),

Amed Koubaa (U. Quebec, Canada), James

Deng (FPInnovations, Quebec, Canada)

Evaluation Of Stress Field For An Elliptical

Inhomogeneity With Imperfect Interface In

Anisotropic Media C.K. Chan (Hong Kong

Poly U., China), Z.Q. HUANG, G.H. Nie (Tongji

U., Shanghai, China)

A Semidefinite Harmonic Oscillator For

Seismic Analysis Of Structures In A Complex

Space. A Physical And Mathematical Shake

Table J. L. URRUTIA-Galicia (UNAM,

Mexico D.F.) Multi-Sphere Models Of Particles In Discrete

Element Simulations

Rimantas KACIANAUSKAS, Darius Markauskas

(Vilnius Gediminas T.U., Lithuania)

Traction-Separation Laws On The Application Of

Cohesive-Zone Models To Delmination Behaviour

Of Composite Material L.L. PENG, X.J. Gong, K.J. Wong(U. Bourgogne, Nevers, France), 1,L. Guillaumat

(Arts et Metiers Paris Tech, France)

Nonlocal Conditions For The Transition Damage To

A Localized Failure in Granular and Fibre-

Reinforced Composites Under Quasistatic Triaxial

Proportional Loading Alexey V. Zaitsev, Yuriy V.

Sokolkin (Perm State Tech. Univ. Russia

Session 10b MAGNETIC 6

Wednesday 2:30PM-5:30PM Ballroom 2

Chairs: Y.Z. Sun, J.J. Hou, P.K. Barhai,

K. Habib

Research on the Characteristics of Dielectric

Barrier Discharge and Dielectric Barrier

Corona Discharge Yanzhou SUN, Mi Zeng

(Henan Poly U., Jiaozuo, China),Yan Lu (Henan

Coal and Chem. Group, Jiaozuo, China)

Synthesis And Characterization of GaAs

Nanowires On Amorphous Substrates

Jared J. HOU 1, Ning Han, Fengyun Wang, Alvin

T. Hui, Guangcun Shan, Fei Xiu, Tak F. Hung,

Johnny C. Ho (City U., Hong Kong, SAR,

China)

Synthesis And Electron Field Emission Studies

Of Nanocrystalline Diamond Films

P.K. BARHAI, Rishi Sharma, Vijay Chatterjee

(Birla I.T., Ranchi, India), N. Woehrl, Volker

Buck (U. Duisburg-Essen, Germany)

Well-Alingned And Conductive Carbon

Nanotube/TiO2 Film For Flexible

Photoelectrode Jiangtao DI, Qingwen Li

(Suzhou Inst. Nano-tech & Bio-tech., China)

Fabrication And Characterization Of Pure

Single Walled Carbon Nanotubes

Microelectrode For Electrochemical

Measurement XuanViet NGUYEN, Yoshiaki

Ukita, Yuzuru Takamura (JAIST, Ishikawa,

Japan)

Current Properties Depending on

Temperature of Hydrogenated Silicon

Oxycarbide

Teresa OH (Cheongju U., S. Korea)

Highly Aligned Carbon Nanotube/Polymer

Composites With Much Improved Electrical

Conductivities Xuemei SUN, Huisheng Peng

(Fudan U., Shanghai, China)

Resistivity/Conductivity of Inorganic Oxides

by Optical Interferometry Techniques

Khaled HABIB, Amer Al-Arbeed (KSIR, Safat,

Kuwait)

Session 10c INFRA 6

Wednesday 2:30PM-5:30PM Ballroom 3

Chairs: Po-Yu Ko, Kihak Lee, E.S. Choi, T. Yu

Analytical Evaluation For Shear Strength Of

Beam-Column Connections Strengthened

With CFRP Composites Kien Le-Trung,

Kihak LEE (Sejong U., Seoul, S. Korea),Do

Hyung Lee (Paichai U., Daejeon, S. Korea),

Luciano Feo (U. Salerno, Italy), David Hui (U.

New Orleans)

Reinforcement of Plain Concrete Piers of

Railroad Bridges using Composite of FRP-

Steel Plates Eunsoo CHOI, Young-Soo Chung,

Joonam Park, Baik-Soon Cho (Hongik U.,Seoul,

S. Korea)

Behaviour Of FRP-Confined Concrete-Filled

Steel Tubular Columns Subjected To

Combined Axial And Cyclic Lateral Loads

Tao YU, Y.M. Hu, J.G. Teng(Hong Kong Poly

U., SAR, China)

Experimental Observation Of Rc Columns

Strengthened With Stainless Steel Wire

Do Hyung LEE (PaiChai U., Daejeon, S. Korea),

Byeong Hwa Kim (Kyungnam U., Kyungnam, S.

Korea), Sung Hoon Kim (Seoul N.U., S. Korea),

Jun-Hyeok Choi (Seoul, S. Korea)

An Experimental Study For Carbonation

Effect On The Concrete Using MIP and SEM

Ho Jae LEE, Do Gyeum Kim, Ki Beom Kim

(Korea Inst Const.Tech., Gyeonggi), Hyung Ju

Kim (Seoul, Korea)

A Study On Microstructure Change By

Carbonation In NPP Concrete

Do Gyeum KIM, Ho Jae Lee (Korea Inst

Const.Tech., Gyeonggi), Hyung Ju Kim(Seoul)

Lateral And Restrained Distortional Buckling

Of Doubly-Symmetric Steel I-Beams

Alper Buyükkaragoz, Ilker KALKAN (Kirikkale

U., Turkey)

Use of Waste polyethylene as a Concrete

Additive: Surface Modification of PE by

Grafting PAM Po-Yu Ko (Nat. Chiayi U.,

Chiayi), Chun-Ku Lu (Nat. Cheng Kung U.,

Tainan),Maw-Tien LEE (Nat. Chiayi U.)

Session 10d NANO 4

Wednesday 2:30PM-5:30PM Dalian Room

Chairs: C.L. Yeh, S. Murai, J. Chen

Enhancement Of Optical Birefringence In Anisotropic Nanocomposites

Mediated By Localized Surface Plasmon Resonance Shunsuke

MURAI, Takuya Tsujiguchi, Koji Fujita, Katsuhisa Tanaka (Kyoto U.,

Japan)

Self-Organized Nanoporous Structure With Long Range Perfect

Ordering Qingfeng LIN, SiuFung Leung , Yunze Long, Zhiyong Fan

(Hong Kong U.S.T., SAR, China)

Fabrication of 2D Silicon Nano-Mold Based On Sidewall Pattern

Technique

E. CHENG, Helin Zou, Chong Liu (Dalian U.T., China)

Rheological Characterization Of Chitosan/Nanowhiskers Composites

Hugo Lisboa, Joao P. Borges, Goncalo Pereira, Ana M. Ramos, Maria T.

CIDADE (U. Nova Lisboa, Portugal)

Nanostructured Dlc Coatings For Self-Assembly Applications

Enric BERTRAN, V.M. Freire, E.J. Cabrera, C. Corbella, S. Portal, E.

Pascual,J.L. Andújar (U. Barcelona, Spain)

Combustion Synthesis Of (Α+Β)-Sialon Composites

Chun-Liang YEH (Feng Chia U., Taichung) Tues-Thurs evening

Session 10e GENERAL 10

Wednesday 2:30PM-5:30PM Hangzhou Room

Chairs: M. Zemko, L.M. Deng, Jarlen Don, G. Chen

Mechanical Properties Study of Advanced Pultrusion Epoxy

Composites

Leiming DENG, Junwei Qi, Jun Xiao, Chong Dou (NUAA, Nanjing, China

Polyethylene: The Next Frontier For Self Reinforced Polymer

Composites Lucas MORGAN, B. Weager (NetComposites, Chesterfield,

UK), J. Clarke, N. Thomas (Loughborough U., UK)

Applications Of Nanotechnology In High Voltage Power Equipment –

Nanodielectrics George CHEN (U. Southampton, UK) INVITED 25 min

Processing Of Carbon-Carbon Composites For Aircraft Brake

Applications

Jarlen DON, Tsuchin Philip Chu (Southern Illinois U., Carbondale)

Preparation and Characterization of Pb-free (Na, K)NbO3-Based

Ceramics For Eco-Friendly Piezoelectric Device Jeong Seon HAN,

Hee Chul Lee (Korea Polytech U., Kyunggi)

Optimization Of Train Seat Frame Made Of Steel-Polyurethane Foam

Composite Michal ZEMKO, Miroslav Urbanek, Martina Donatova, Jan

Dzugan, Libor Kraus (COMTES, Dobrany, Czech Rep.)

Tensile Strength of Pandanus Odoratissimus Fibers Reinforced

Unsaturated Polyester Composite Hairul ABRAL, Heri Andriyanto,

Ilhamdi (U. Andalas, Indonesia)

5:30PM-6:00PM Break

Session 11a MATH 11

Wednesday 6:00PM-9:00PM Ballroom 1

Chairs: R.M. Felfel, V.V. Lepov, Y.S. Su,

S. Naya

Multiscale Modeling Of Deformation

Processes In Situ

Valeriy V. LEPOV (Yakutsk, Russia), Boris A.

Loginov (Moscow Inst Electronics, Russia)

Study Of Dynamic Drop Impact Response Of

Open-Cell Metal Foam

Yishi SU, Xiaolu Gong (U.T. Troyes, France)

Creep-Buckling Failure Of Open-Cell Foams

Under Uniaxial Compression

Ting-Jung Chen, Jong-Shin HUANG (Nat.

Cheng Kung U., Tainan)

New Statistical Functional Nonparametric

Methods For Study Of Nanomaterials

Salvador NAYA, Ramon Artiaga, Mario

Francisco-Fernandez, Javier Tarrío-Saavedra,

Jorge López-Beceiro (U. Coruna, Ferrol, Spain)

Flexural, Shear And Compressive Properties

Of Bioresorbable PLA-PBG Fibre Reinforced

Composite Intramedullary Rods R.M. Felfel

(Mansoura U., Egypt), I. Ahmed, A.J. Parsons,

G.S. Walker, C.D. RUDD (U. Nottingham, UK)

Research Of Nanostructural Tool Materials

Servosurfaces

A.S. SYROMYATNIKOVA, M.N. Safonova,

A.A. Fedotov A.A (Yakutsk, Russia)

Development Of Methods Of Severe Plastic

Deformation And Research Methods Of

Ultrafine Steels N.D. PETROVA, A.M.

Ivanov, Eu S. Lukin (Yakutsk, Russia)

Use Of Ultradisperse Modifiers For

Production Of Wear Resistant Powder

Coatings And Materials

M.Z. BORISOVA, G.G. Vinokurov, N.F.

Struchkov, M.I. Vasileva (Yakutsk, Russia)

Session 11b METAL 4

Wednesday 6:00PM-9:00PM Ballroom 2

Chairs: P. Fajfar, S.J. Huang, Y.T. Liu, B. Zhao

Mechanical Suppression Of Tunneling

Between Metallic Beads Aymen TEKAYA, R.

Bouzerar (U. Picardie Amiens, France), V.

Bourny (U. Picardie)

Thermal Fatigue Behavior And Cracking

Characteristics Of Indefinite Chill Iron Rolls

Peter FAJFAR, Milan Tercelj, Matevz Fazarinc

(U. Ljubljana, Slovenia), Borut Zuzek

(Inst.Metals Tech., Ljubljana)

Mechanical Properties Of Particle Reinforced

Magnesium Composites SiCp/AZ80 Song-Jeng HUANG, Chi-Rung Li, Kai-Lun Yan

(Nat. Chung Cheng U., Chia-Yi) A Comparative Study Of Corrosion Resistance On

Metal Joint By Using Different Types Of Cooling

Method W.B. Wan NIK (U. Malaysia Terengganu),

R. Rosliza (TATI U. Coll., Kemaman) , O. Sulaiman

(U. Malaysia Terengganu), Y. Prawoto (U.Teknologi Malaysia), M.F.R. Zulkifli (U. Malaysia Terengganu),

David Hui (U. New Orleans)

Structure Of Al87Ni8Dy5 In Amorphous And

Nanocrystalline State

S.I, Mudry, Yu.O. Kulyk (Nat. U. Lviv, Ukraine)

Study Of Cooling Rate Effect On Back-Diffusion

During Solidification Of Continuously Cast Steel

Billet

Jana DOBROVSKA (TU Ostrava, Czech Rep.),

Frantisek Kavicka (Brno U.T., Czech Rep.), Hana

Francova, Věra Dobrovska (TU Ostrava)

SO2-Gas Corrosion Of Cr2AlC Compounds

Sang-Hwan BAK, Min-Jung Kim, Sung-June

Bong, Seul-Ki Kim (Sungkyunkwan U., Suwon,

S. Korea)

Session 11c COMPOSITES 2

Wednesday 6:00PM-9:00PM Ballroom 3

Chairs: L. Feo

Fabrication Of A Microencapsulated n-

Octadecane Material For Thermal Energy

Storage D.Z. Chen(Shenzhen

U.,Guangdong,China), C.P. TSUI, C.Y.Tang

(Hong Kong Poly U.), H. Zhu, Y.Z. Chen, G.C.

Yang, Y. Chen (Shenzhen U.), L. Chen (Hong

Kong Poly U.)

III-V Compound Semiconductor Transistors

Heterogeneously Integrated On Si Substrates

Hyunhyub KO (Ulsan Nat. I. Sci.Tech., S.

Korea)

Applications of Microbubble in Aquaculture

Gilbert Y.S. CHAN (Hong Kong Poly U.),

Jack Xiao (Ozner Group, Shanghai, China),

Li Wei, S W Kwok (Hong Kong Poly U.)

Oxidation Of Nitride Layers Formed On Ti-

6al-4v Alloys By Gas Nitriding Min-Jung KIM,

Sang-Hwan Bak, Zhao Chenguang

(Sungkyunkwan U., Suwon, S. Korea)

Construction of Surface Piezoelectricity Using

State-Space Formalism Weiqiu CHEN

(Zhejiang U., Hangzhou, China)

A Study Of Early Strength Improvement Of

Cement Mortar Mixed With Blast-Furnace

Slag Powder Jinhyoung KIM, Hanseung Lee

(Hanyang U., Ansan, S. Korea)

A Study on the Fixed Amount of CO2 and the

Estimation Of Production of CaCO3 on Waste

Concrete Powder by Wet Carbonation Heesung AHN, Hanseung Lee (Hanyang U.,

Ansan, S. Korea) Highly Efficient Ultraviolet Light Emission From

Silicon Nanocrystals Naoto SHIRAHATA (NIMS,

Tsukuba, Japan) Mon-Wed

Fabrication And Characterization Of

Cu2O/TiO2 Composite Films For Solar Cell

Applications Ayib Rosdi ZAINUN (UiTM,

UMP, Malaysia, and Nagoya I.T., Japan),

Tomoya Sakamoto (Nagoya I.T., Japan), Uzer

Mohd Noor, Mohamad Rusop (U.Tek MARA,

UiTM, Malaysia), Masaya Ichimura (Nagoya

I.T.)

Session 11d NANO 5

Wednesday 6:00PM-9:00PM Dalian Room

Chairs: A. Cornet, A.J. Nathanael, W.C. Xiao, K. Yusoh

Possible Electronic Device Applications of Graphene Nanoribbons

Gengchiau LIANG (Nat. U. Singapore) INVITED 25 min

ZrN/Hydroxyapatite Nanocomposite Coatings By Co-Sputtering

Method A. Joseph NATHANAEL, Jun Hee Lee, Sun Ig Hong

Chungnam N.U., S. Korea)

The Influence Of Nano-Fillers On The Insulation Properties Of Epoxy

Resin Qi WANG, George Chen (U. Southampton, UK)

A Novel Nano-diamond Patterning Technique using Selective

Nucleation and Growth Weican XIAO, Xi Zhou, Sean Yost, Ramjee

Balasubramanian, Sacharia Albin (Old Dominion U., Norfolk, VA)

Nanomechanical Properties Of Polyurethane Nanocomposites Studied

By Nanoindentation Kamal YUSOH (U. Malaysia Pahang, Kuantan), M.

Song (Loughborough U., UK)

Fabrication and Mechanical Properties of MWCNT Epoxy Composite

Chorng H. TWU (Tainan U.T., Tainan), Chen-Chi M. Ma, Sheng-Yen Wu,

Yuan-Li Huang, Hsi-Wen Tien, Shin-Yi Yang, Siu-Ming Yuen (Nat. Tsing

Hua U., Hsinchu)

Horizontal Suspension of Carbon Nanotubes

Jianmin MIAO, Jingyu Lu (Nanyang T.U., Singapore)

Nanowires: Your Laboratory And Theoretical Book To Understand

Surface Phenomena

Albert CORNET, J. Daniel Prades, Albert Cirera (U. Barcelona, Spain)

Session 11e GENERAL 11

Wednesday 6:00PM-9:00PM Hangzhou Room

Chairs: M. Watanabe, W. Shang, X. Meng, X.R. Zeng

Hot-Press Fast-Bonded Technology For Prepreg Wiinding

Biao YAN, Jun Xiao, Liwei Wen (NUAA, Nanjing, China)

Understandings of Solid Particle Bonding Behaviors in Warm Spray

Deposition Makoto WATANABE, KeeHyun Kim, Seiji Kuroda (NIMS,

Tsukuba, Japan)

SEM Visualization Of CNTS In CNT/Epoxy Composites At Low

Accelerating Voltage

Wenjing LI, Wolfgang Bauhofer (Hamburg U.T., Germany)

Influence Of Z-Pin’s Curing Degree On Properties Of Laminates And

Its Mechanism Wei SHANG, J. Xiao , P.Z. Cheng, L.M. Deng. Q.Y. Chu

(NUAA, Nanjing, China)

Fiber-Metal Hybrid Laminates As Structural Material In Towers For

Offshore Wind Energy Converters J.C. Suarez (U. Poli Madrid, Spain),

X. MENG (Ocean U. of China, Qingdao), S. Guzman, M.A. Herreros, I.

Diez (U. Poli Madrid)

Synergistic Effect Of Phosphorus-Containing Nanosponge On The

Intumescent Flame Retardant Polypropylene Xuejun Lai, Xingrong

ZENG, Hongqiang Li, Changyu Yin, Haili Zhang, Kecheng Gong (South

China U.T., Guangzhou)

Nanodiamonds From Pulsed Plasma Generated In Water

Imil A. AKKOZIEV, S.K. Sulaymankulova, A.S. Mametova, J.K.

Zhasnakunov (KRSU, Kyrgyzstan)

Self-Organization Of Nanoparticles Of Copper, Silver And Gold In

Pulsed Plasma In Liquid S.K. Sulaimankulova, Imil A. Akkoziev, A.S.

Mametova, Bektur K. AKKAZIEV (KRSU, Kyrgyzstan)

Session 12a MATH 12

Thursday 8:00AM-10:30AM Ballroom 1

Chairs: A. AlShehri, H.P. Song, G.M. Luo,

R. Mix

Preparation And Microstructural

Characterization Of Carbon /Carbon

Composite Ramani VENUGOPALAN, D.

Sathiyamoorthy, A.K. Tyagi (Mumbai, India)

The Interaction Between A Screw Dislocation

And A Semi-Infinite Wedge Crack With A

Nano Circular Inclusion At Tip

Hao-Peng SONG. Cun-Fa Gao (NUAA, Nanjing,

China)

A Study on Improvement of Laminate

Structures Subjected to Low-Velocity Impact

Guang-Min LUO (Nat. Kaohsiung Marine U.,

Kaohsiung)

Special Interface Design For Adhesion

Improvement Renate MIX, Huajie Yin, Joerg

Friedrich (BAM, Berlin, Germany)

A Cellular Automata Simulation For The

Tension Behavior Of Carbon Nanotubes

X.H. Huang, X.Q. HE (City U., Hong Kong,

China)

Thermal Radiation Characteristics Of Silicon

Inverse Opal In Mid Infrared Range

Jing XU, Yujie Li, Rongsheng Liu, Kai Xie (Nat.

U. Def.Tech., Changsha, China)

Dynamic Response Analysis of Shear

Deformable Laminated Beam with the

Method of Reverberation Ray Matrix

F.X. Miao (Ningbo U., China), Guojun SUN

(Shanghai Jiaotong U., China)

Tensile And Fracture Behaviour Of Die-

Drawn Polypropylene-Clay Nanocomposites

Abdullhadi ALSHEHRI (SABIC, Riyadh, S.

Arabia), J. Sweeney, P. Caton-Rose, P.D. Coates

(Bradford U.,UK)

Session 12b TEXTILE 3

Thursday 8:00AM-10:30AM Ballroom 2

Chairs: Jing Zhou, J. Militky, P. Dolez,

C. Ha-Minh

Nanophase Treatment Of Natural Fiber For

Fiber Reinforced Polymer Composites

Sheldon Q. Shi, Jinshu Shi, Kaiwen Liang, Jinwu

WANG (Mississippi St.U., Starkville)

Prediction Of Glass Leno Fabrics Porosity

And Strength

Jirí MILITKY (TU Liberec, Czech Rep.),

Jaroslav Dvorak (Res Inst.Textile

Machinery,Liberec, Czech Rep.), Dana

Kremenakova, Brigita Kolcavova-Sirkova (TU

Liberec)

Electromagnetic Shielding Of Hybrid Weaves

Veronika SAFAROVA, Jiri. Militky (TU Liberec,

Czech Rep.)

Preparation Of Nanocellulosic Powder From

Jute Fibres By Ball Milling Process

Vijay BAHETI, Miroslava Marsalkova, Jiri

Militky (T.U. Liberec, Czech Rep.)

Factors Affecting the Tearing Resistance of

Textile Structures

Patricia DOLEZ, Ennouri Triki and Toan Vu-

Khanh (Ecole Tech Sup, Montreal, Canada)

Experimental Investigations Of The Impact

Behavior Of A Warp Interlock Fabric

Cuong HA-MINH, François Boussu, Jan Van

Roey, Toufik Kanit, David Crépin, Abdellatif

Imad (U. Lille Nord de France)

Generalized Geometric Model Of 3D Woven

Preforms From Spun Yarns

Abdel-Fattah M. SEYAM, Mehmet E. Ince (N.

Carolina St. U., Raleigh)

Compatibilizing Effect Of Epoxy On The

Structure And Properties of PET/PA6 Blend

Fibers Jing ZHOU, ByungGil Min, JuYeon

Kim (Kumoh Nat. I.T., Gumi, S. Korea)

Session 12c CHEM 4

Thursday 8:00AM-10:30AM Ballroom 3

Chairs: S. Al-Malaika, S. Zalis, L. Lapcik,

M. Ahmad

Quantum Chemical Modeling Of Spectral

Properties And Electron Transfer In Extended

Systems Stanislav ZALIS, Hana Kvapilova

(ASCR, Prague, Czech Rep.), Irena

Kratochvílova, Jakub Sebera (ASCR), Antonín

Vlcek, Jr. (U. London, UK), Rainer F. Winter (U.

Regensburg, Germany)

Kinetics And Thermodynamics Of Model

Colloidal Particle Deposition On Synthetic

Polymer Surfaces Lubomir LAPCIK, Jr., M.

Frastík, P. Smolka, B. Lapcikova(Tomas Bata U.,

Zlin, Czech Rep.)

Defect Induced Hardening And Toughening in

Mn3CuxGe 1-xN Metallic Perovskite

Yoshinobu NAKAMURA (U. Tokyo, Japan),

Koshi Takenaka (Nagoya U., Japan), Akira

Kishimoto (Okayama U., Japan), Hidenori

Takagi (U. Tokyo, Japan)

High Molecular Weight Soft Segment based

Polyethylene Shape Memory Polymers

M. AHMAD (U. Bolton, UK), B. Xu (Heriot-

Watt U., Edinburgh, UK), H. Purnawali

(Nanyang T.U., Singapore), P.J. King, P. Chalker

(U. Liverpool, UK), Y.Q. Fu (Heriot-Watt U.),

W.M. Huang (Nanyang T.U.), M. Miraftab, J.K.

LUO (U. Bolton, UK) chair

Oxidation Of MoSi2/SiOC/SiC Composite

Sung-June BONG, Min-Jung Kim, Sang-Hwan

Bak, Dong-Bok Lee(Sungkyunkwan U., Suwon)

Polymer-Containing Catalytic

Nanocomposites Esfir SULMAN, Valentina

Matveeva, Mikhail Sulman (Tver T.U., Russia)

PP-Clay Nanocomposites: Degradation and

Stabilisation S. Al-MALAIKA, H.H. Sheena

(Ashton U., Birmington, UK)

Session 12d OXIDE 3

Thursday 8:00AM-10:30AM Dalian Room

Chairs: K. Tanaka, T. Endo, T. Yamamoto, A.R. Zainun

Origin Of Ferromagnetism In Amorphous EuO-TiO2 Thin Films

Katsuhisa TANAKA, Koji Fujita, Yanhua Zong, Takahiro Kawamoto,

Hirofumi Akamatsu, Yoshiro Kususe, Shunsuke Murai (Kyoto U., Japan)

INVITED

In-plane Crystalline Orientations of LSMO/ZnO Double Layers

Tamio ENDO, Kenichi Uehara (Mie U., Japan), Miyoshi Yokura

(Kawamura Sangyo, Mie, Japan), Katsuhiko Inaba (Rigaku Corp, Tokyo),

Tomohiko Nakajima, Tetsuo Tsuchiya (NIAIST, Tsukuba, Japan), Hiroshi

Kezuka (Tokyo U.T.), Kazuhiro Endo (Kanazawa I.T., Japan) INVITED

Dominant Role Of Grain Boundary Scattering On Carrier Transport

Of Highly Transparent Conductive Ga-Doped ZnO Films

Tetsuya YAMAMOTO, Huaping Song, Hisao Makino and Naoki

Yamamoto (Koichi U.T., Japan) INVITED

Fracture Strength Nanostructured Material Based On Dioxide

Zirconium Monocrystalline

Maxim PUGACHEV, Gennadi Moskvitin, Askold Melshanov

(Inst.Machines Sci, Moscow, Russia)

Oxidation Of Ni3Al-(Cr, Zr, Mo, B) Alloy Between 900 And 1100°C In

Air Seul-Ki KIM, Min-Jung Kim, Sang-Hwan Bak, Dong-Bok Lee

(Sungkyunkwan U., Suwon, S. Korea)

The Antibacterial Activities of Ag Doped T-ZnO

Xing DUAN, Xiaoling Xu, Zuowan Zhou (Southwest Jiaotong U.)

Session 12e GENERAL 12

Thursday 8:00AM-10:30AM Hangzhou Room

Chairs: Liwei Wen, J.S. Rhyee, G.a. Ibrahim, F. Elaldi

Quasi-One-Dimensional Transport And Thermoelectricity: Peierls

Distortion In Indium Selenides

Jong-Soo RHYEE (Kyung Hee U., S. Korea)

Explosive Welding Of Magnesium Alloy With Aluminum And Stainless

Steel P. MANIKANDAN, Joonoh Lee, Akihisa Mori, Kazuyuki

Hokamoto (Kumamoto U., Japan)

Application of Box-Behnken in Turning of Inconel 718 using PVD

Carbide Tools under Minimum Quantity Lubrication

Gusri Akhyar IBRAHIM, Che Hassan Che Haron, Jaharah Abdul Ghani,

Ahmad Yasir Moh. Said, Moh. Zaid, Abu Yazid (U. Kebangsaan Malaysia,

Kuala Lumpur)

A Study On Curing Processes And Environmental Effects For Rapid

Composite Repair Faruk ELALDI (U. Baskent, Turkey), Pelin Elaldi

(Bilkent U., Turkey)

Synthesis Of Superparamagnetic, Photocatalytic Nanocomposites For

Water Purification Darko MAKOVEC (Jozef Stefan Inst., Ljubljana,

Slovenia), Marjan Sajko (Maribor, Slovenia), Aljaz Selisnik (Celje,

Slovenia) c, Miha Drofenik (U. Maribor)

Research on Automatic Tape Laying of Elliptical Cylinder

Liwei Wen, Xianfeng Wang, Junwei Qi, Xiaoping Li, Yi Wang (NUAA,

Nanjing, China), Yurong Chen (Nanjing Medical Secondary Sch., China)

Resin Flowing Analysis In Sandwich Laminates Under VARTM

Process Cheng-Hsien CHUNG (United Ship Design Dev Cen, Taipei), Yu-

Ti Jhan , Ya-Jung Lee,Yu-Chieh Wang (Nat. Taiwan U., Taipei)

10:30AM-11:00AM Coffee Break

Session 13a MATH 13

Thursday 11:00AM-1:30PM Ballroom 1

Chairs: Lifang Guo, S.I. Ibekwe, R Noorani,

M. Todt

Functional Stability Of SMP Based Syntactic

Foam Samuel I. IBEKWE (Southern U. Baton

Rouge, LA), Tao Xu (Southern U. Nanjing,

China), Guoqiang Li (S.U. Baton Rouge, and

L.S.U.)

Design Of Experiments For Improving The

Tensile Strength Of Rapid Prototyping

Polymer Materials

James Clements, Rafiq NOORANI (Loyola

Marymount U., Los Angeles, Calif.)

Mechanical Behavior Of Carbon Nano-

Crystallites Forming Carbon Fibers

Melanie TODT, Franz G. Rammerstorfer

(Vienna U.T., Austria), Oskar Paris,Franz D.

Fischer (Leoben, Austria)

Interface Fracture Mechanics Of Nanoscale

Components On A Substrate

Hiroyuki HIRAKATA, Taku Nishihira, Akio

Yonezu, Kohji Minoshima (Osaka U., Japan)

Mechanical Behavior Of Metallic Nanowires

Containing Vacancy Cluster Defects Pei-

Hsing HUANG, Lay Gaik Teoh, Yu-Ren Wu,

Ming-Yue Huang, Hong-Yi Li (Nat. Pingtung U.

Sci Tech., Neipu)

Modeling Of Ecological Plastic Lubricant

Flow Martin VASINA (Tomas Bata U., Zlin,

Czech Rep.), Lumír Hruzík (TU Ostrava,Czech

Rep.)

Compression Fatigue After Impact Testing Of

Thermosetting Composites

Volker ALTSTAEDT, Manuel Kempf, Sebastian

Schwaegele (U. Bayreuth, Germany),Andreas

Ferencz (Henkel AG, Duesseldorf, Germany)

Session 13b MAGNETIC 7

Thursday 11:00AM-1:30PM Ballroom 2

Chairs: Bablu K. Ghosh, X. Landreau, Z.

Bouchkour, Alessio Perrone, Yanbo LI Modulation of Metal-Insulator Transition

Temperature in W-doped VO2 Thin Films Toward

Mott Devices Hidefumi TAKAMI, Kenichi

Kawatani, Teruo Kanki, Shigenori Ueda 1, Keisuke

Kobayashi1, Hidekazu Tanaka (Osaka U., Japan)

Deposition Of Nanometric SiOxHyCz Films At

Different Substrate Temperatures By

Atmospheric Pressure Microwave Plasma

Torch (Tia):First Steps Towards Self-

Assembled 3-Dimensional Nano-Sensors

Xavier LANDREAU, Briac Lanfant, Thérese

Merle, Guillaume Bouscarrat, Zakaria

Bouchkour, Christelle Dublanche-Tixier, Pascal

Tristant (U. Limoges, France) Influence Of The V/Iii Ratio On The Growth Of

Group Iii Nitride Quantum Dots Deposited On

Silicon Substrate By Plasma Enhanced Chemical

Vapor Deposition Zakaria BOUCHKOUR, Pascal

Tristant, Christelle Dublanche-Tixier, Cedric Jaoul,

Xavier Landreau (U. Limoges, France), Elsa Thune, René Guinebretiere (CEC, Limoges, France)

Ultraviolet Photodetectors Made By Bridging

Wide Bandgap Semiconductor Nanowires

Yanbo LI. Jean-Jacques Delaunay (U. Tokyo,

Japan) Grown Ambient Effect In Gan Crystalline Quality

On Si(111) By MOVPE Bablu K. GHOSH (U. Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan)

Effect Of Modified-Montmorillonite And Poss On

Electrical Properties Of Solid Polymer Elecrolytes

Keun-Byoung YOON (Kyungpook Nat U., Daegu, S.

Korea), Dong-ho Lee (Dongyang Mirae U., Seoul, S.

Korea)

Time-Integrated And-Resolved Mass Spectrometric

Investigations During Laser Ablation Of Yttrium In

High Vacuum Alessio PERRONE, F. Gontad, A.

Lorusso (U. Salento,)

Nanostructured Mg Thin Films On Cu Substrates

For Photocathode Applications Carmen RISTOSCU, Ion N. Mihailescu (Magurele, Ilfov)

Session 13c INFRA 7

Thursday 11:00AM-1:30PM Ballroom 3

Chairs: L. Feo, Q.f. Liu, B.H. Kim,

M.E. Abdullah

The Characteristics of the Cement Mortar

with Acetone-treated Rubber Crumbs

Chun-Ku Lu (Nat. Cheng Kung U., Tainan),

Liang-Hsing CHOU, Ying-Yu Shiu (Nat. Chia-yi

U., Minxiong)

Multi-Phase Modeling Of Ionic Transport In

Concrete When Subjected To An Externally

Applied Electric Field Qingfeng LIU, Long-

yuan Li, Jian Yang (U. Birmingham,UK)

Numerical Modeling Of Double Skin Profiled

Composite Shear Wall System Under In-Plane

Monotonic Loadings Shahryar RAFIEI,

Khandaker M.A. Hossain,Mohamed Lachemi,

Kamran Behdinan (Ryerson U., Toronto, Canada)

On The Shear Forces Distribution In Double

Lap Bolted FRP Joints: Numerical And

Experimental Investigations Francesco

Ascione, Luciano FEO (U. Salerno, Italy)

Structural Health Monitoring Of Lattice

Girder Railway Bridges H.A.D.S. Buddika,

P.B. Ranjith DISSANAYAKE (U. Peradeniya, Sri

Lanka) chair

Neural Network Modeling Of Strength

Enhancement Of CFRP Confined Concrete

Cylinders Mojtaba FATHI, Mostafa Jalalb

(Razi U., Iran)

Session 13d BIO 4

Thursday 11:00AM-1:30PM Dalian Room

Chairs: Y.M.S. El-Shazly, S. Ghosh, P. Chow, Y.R. Wu

Intravenous Fat Nanoemulsion: a Novel Antidote for Local Anesthetic-

Induced Systemic Toxicity in Humans Guy Weinberg, Israel

RUBINSTEIN (U. Illinois-Chicago)

Kenaf Composition Boards With Termite Resistance

Poo CHOW (U. Illinois, Urbana), F.S. Nakayama, T.A. Coffelt, S.H.

Vinyard

Synthesis And Characterization Of Mesoporous CaO-B2O3-SIO2

Bioactive Glass Lay-Gaik TEOH, Yu-Ren Wu, Pei-Hsing Huang, Yi Lin

Huang (Nat. Pingtung U. Sci. Tech., Neipu)

Synthesis, Characterization And In Vitro Bioactivity Of Sol-Gel

Derived Mesoporous Bioactive Glass Yu-Ren WU, Lay Gaik Teoh, Pei-

Hsing Huang, Wei Haw Wu(Nat. Pingtung U. Sci. Tech., Neipu)

Applications of Cd-Te Quantum Dot Nanoparticles in Bio - Medical

Research Somesree GHOSHMitra, Nathaniel Mills (Texas Woman’s U.,

Denton, TX), Santaneel Ghosh, Jai N. Dahiya (Southeast Missouri St.U.,

Cape Girardeau). Tong Cai, J.A. Roberts (U. North Texas, Denton)

Improvement In Functional Properties Of Potato Starch/Nano-

Cellulose Fibre (NCF) Nanocomposite Films Niranjan R. Savadekar,

U.S. Annapure, S.T. MHASKE (Inst. Chem Tech., Mumbai, Mumbai,

India)

Mechanical Reliability of Bio-Composites from Bovine Teeth

Yehia M.S. El-SHAZLY (Alexandria U., Egypt), Mariana A. Moussa

Session 13e GENERAL 13

Thursday 11:00AM-1:30PM Hangzhou Room

Chairs: P.F. Wang, T. Chen, Huirong Le, S.S. Sharma

Research On The Deformation Of Prepreg Tape Influenced By The

Temperature

Xianfeng WANG, Liwei Wen, Junwei Qi, Xiaoping Li, Yi Wang (NUAA,

Nanjing, China), Yurong Chen (Nanjing Medical Secondary Sch., China)

Mechanical and Tribological Properties of Epoxy-CNT Nanocomposite

Coatings Huirong. LE (U. Plymouth, UK), A. Howson, M.

Ramanauskas (U. Dundee, UK) chair

Thermomechanical And Precipitation Hardening Of Stir-Cast Silica

Reinforced Aluminium Alloy Matrix Composites

S.S. SHARMA, K. Jagannath, N.S. Mohan, Chandrashekhar Bhat, P.R.

Prabhu, R.C. Chadaga (Manipal Inst. Tech., India)

Prediction of Sound Attenuation Characteristics of Muffler

Chandrashekhar BHAT, S.S. Sharma, K. Jagannath, N.S. Mohan (Manipal

Inst.Tech., India), S.G. Sathisha (QUEST, Bemgaluru, India) chair

Performance Comparison Of Carbide And HSS Drills In Drilling Of

GFRP Composite Materials- An Experimental Study Using Design Of Experiments B.R.N. MURTHY, Lewlyn L. R. Rodrigues, D. Anjaiah

Carbon Nanotube Fiber For Photovoltaic Application

Tao CHEN, Zhibin Yang, Huisheng Peng (Fudan U., Shanghai, China)

Improvements To The Design Of A Particle Beam Cluster Source For

Nanofabrication Stuart Thornton, Chris Binns, Shian GAO

Chalcogenide Microsphere Fabricated From Fibre Taper-Drawn Using

Resistive Heating Pengfei WANG, Gilberto Brambilla (U. Southampton,

UK), Yuliya Semenova,Qiang Wu, Gerald Farrell (Dublin

Inst.Tech.,Ireland)

1:30PM-2:30PM LUNCH

Session 14a MATH 14

Thursday 2:30PM-5:30PM Ballroom 1

Chairs: J.D. Yau, Sergey A. Kostyrko, S.H. Ni,

S.R. Kuo

Application Of Hilbert-Huang Transform To

The Signal Analysis Of Sonic Echo Testing

Sheng-Huoo NI, Li-Ting Hsu (Nat. Cheng-Kung

U., Tainan)

Effect Of Porosity On Impact Strength Of

Vitrified Bond Diamend Wheels

Yong-gai Hou, Fu-ren XIAO, Gui-ying Qiao

(Yanshan U., Qinhuangdao, China), Wen-jun Zou

(Henan U.T., Zhengshou, China), Bo Liao

(Yanshan U., China)

Applicability Of Gibbs Adsorption Equation

To Deformed Solid Surfaces Emmanuel M.

GUTMAN (Ben-Gurion U. Negev, Israel)

A Boundary Perturbation Analysis For A

Multilayer Film Coating Sergey A.

KOSTYRKO, M.A. Grekov (St. Petersburg State

U., Russia)

Exact Solution Of Edge-Bending Buckling Of

Rectangular Orthotropic Plates Shyh-Rong

KUO (Nat. Taiwan Ocean U., Keelung), J.D. Yau

(Tamkang U., Taipei)

Magneto-Elastic Response Of Rectangular

Orthotropic Plates Due To Multi-Lane Moving

Loads

Jong-Dar YAU (Tamkang U., Taipei)

BGA Impact Analysis: Numerical Study

Rasha M. Soliman, Medhat Awad El-Hadek,

Shaban Ibrahim ABDOU (Port-Said U.,Egypt)

On Different Projectile Nose Shapes in Soil

And Foam Penetration

Ce XU, Fenghui Wang, Shaoming Wang, Tiejun

Liu (Northwestern Polytech.U., Xi’an, China)

Session 14b MAGNETIC 8

Thursday 2:30PM-5:30PM Ballroom 2

Chairs: S.K. Bose, C.H. Wong, P.G. Li,

S.G. Yoon On The Suitability Of Some Cr-Based

Chalcogenides And Pnictides As Spintronic

Materials - Density Functional Results Yong LIU

(Yanshan U., Qinhuangdao, Hebei, China), Shyamal K.

Bose (Brock U., St. Catherines, Canada), J. Kudrnovsky (ASCR, Prague, Czech Rep.)

Magnetism of Quaternary Heusler Alloys:

(Cu,Ni)2MnSn as a Case Study

Shyamal K. BOSE (Brock U., St. Catharines, Ontario,

Canada), J. Kudrnovsky, V. Drchal (Czech Acad Sci,

Prague)

Molecular Dynamics Simulation For Ultrathin

Lubricant Nanofilms With Nonfunctional And

Functional End Groups B. Li, Chee How WONG (Nanyang T.U., Singapore),S.K. Yu, W. Hua, W.D.

Zhou (Data Storage Inst., Singapore)

Optoelectrical Properties of CdSe-Au Nanorod

Networks Peigang LI, Alexandros Lappas (IESL-

FORTH, Heraklion, Greece), Romain Lavieville, Yang

Zhang, Roman Krahne (Italian Inst.Tech., Genoa)

A Giant Dielectric Permittivity of BMNO-Bi

Composite Films Grown At Room Temperature By

Radio-Frequency Sputtering Hyun-June Jung, Hyun-Ah Song, Soon-Gil YOON (Chungnam Nat. U.,

Daejeon, S. Korea) INVITED 25

InGaN-Based MSM Photodetectors With

Transparent Ga-Doped ZnO Electrodes

P.C. CHANG (Kun Shan U., Yong-Kang, Tainan), A.N.

Tu (Nat. Cheng Kung U.,Tainan), K.H. Lee (Hsinchu) , C.L. Yu, S.J. Chang (Nat. Cheng Kung U.)

Growth and Micro Waves Characterizations of BST

and BST/BZN Hetero Structures Thin Films

Denis Remiens (U. Valenciennes, France), Lihui YANG

(Shanghai Inst. Ceramics, SICCAS, China), F. Ponchel, C. Soyer, J.F. Legier (U. Valenciennes), G. Wang, X.

Dong (SICCAS, China)

Session 14c INFRA 8

Thursday 2:30PM-5:30PM Ballroom 3

Chairs: S.H. AlSayed, F.M. Cheng, N.M. Nor,

C. Galan-Marin

Environmental Effects On Polymer Insulators

Ibrahim O. HABIBALLAH (King Fahd U. Pet.

Min, Dhahran, S. Arabia)

Numerical Study for CFRP Strengthening of

RC Columns for Blast Resistance

Saleh H. ALSAYED, Husain Abbas, Yousef Al-

Salloum (King Saud U., S. Arabia)

Application Of Ant Colony Algorithm In

Discrete Optimal Design Of Structural Truss

Yancang LI, Lina Zhao (Hebei U. Engineering,

Handan, China)

Research On Concrete Mixing Sequence At

The Time Of Feeding

Fangmeng CHENG, Yancang Li, Lei Wang

(Hebei U. Engineering, Handan, China)

Load Test on Reinforced Concrete Beams

Strengthened by Carbon Fibre Laminated

Plates—A Case Study

Humayun R. H. KABIR (Kuwait U., Safat)

Analysis Of Sandwiched Composite Long-

Span Foldable Beam

Norazman M. NOR, Agusril, Alias Yusof, Risby

Sohaimi, Ahmad M.A. Zaidi (UPNM, Nat Def.

U. Malaysia) Characterization Of Polymer Mortars Exposed To

Some Acid Solutions.

C. GALAN-MARIN; C. Rivera-Gomez (U. Sevilla,

Spain)

Bending Performances And Stiffness of FRP-steel-

Concrete Composite T-Beams With

Prefabricated BFRP Shell

Hong Zhu, Pu Zhang, Gang Wu, Zhishen

Wu(Southeast U., Nanjing, China)

Bending Performances And Stiffness Of Frp-Steel-

Concrete Composite T-Beams With Prefabricated

BFRP Shell Hong ZHU,

Pu Zhang, Gang Wu, Zhishen Wu (Southeast U.,

Nanjing, China)

Session 14d NANO 6

Thursday 2:30PM-5:30PM Dalian Room

Chairs: K. Talukdar, P.X. Feng, Jiqing He, Yu Teng

Carbon Nanotube / Poly(Vinyl Alcohol) Composites Formed By Spray

Winding Wei LIU, Yiping Qiu (Donghua U., Shanghai, China), Qingwen

LI (Suzhou Inst. Nano-Tech and Nano-Bionics, China)

A Prototype of Functional Nanowires-based 3D Biosensor Arrays

Peter X. FENG (U. Puerto Rico)

Effect Of Hot-Stretching Process On The Electrochemical Performance

Of Sn at CNFs Composite Anode Materials For Li-Ion Batteries

Xin LI, Yunhua Yu,Bingxue Liu,and Xiaoping Yang (Beijing U.

Chem.Tech., China)

Nano Fe3O4 Particles Addition Effects On YBa2Cu3O 7-δ

Superconducting Properties Wei KONG, Siti Nurdalila (Kuala Lumpur

Infrast. U.C., Malaysia), Ing Kong (RMIT,Melbourne, Australia), R. Abd-

Shukor (U. Kebangsaan)

Preparation Of Fe3O4/Cap Core-Shell Nanoparticles Exhibiting Good

Magnetism And Bio-application Yu TENG, Qing Cai, Zhou Fang, Keyu

Li, Xiaoping Yang(Beijing U. Chem.Tech., China)

Compressive Behavior Of Filament Wound Carbon Fiber/Epoxy

Composite Tubes With Different Winding Angles Gang CHEN, Gang

Li, Jinming Zhu, Feng Wen, Yunhua Yu, Xiaolong Jia, Xiaoping Yang

(Beijing U. Chem.Tech., China)

Simulation Study Of A High Performance Metal-Oxide Carbon

Nanotube Field Effect Transistor Keka TALUKDAR, Apurba Krishna

Mitra (Durgapur, India)

Session 14e GENERAL 14

Thursday 2:30PM-5:30PM Hangzhou Room

Chairs: O. Soykasap, D. Rincon, C.R.C. Lima, I.R. Mustapa

High Thermal Conductivity Diamond Composites

F.M. SHAKHOV (Ioffe, St. Petersburg, Russia), A.M. Abyzov (St.

Petersburg Inst.Tech., Russia), S.V. Kidalov (Ioffe, St. Petersburg)

Testing Of 2m Offset Thin-Shell Reflector Demonstator

Omer SOYKASAP, Sukru Karakaya (Afyon Kocatepe U., Turkey)

Application Of The Scourer Or Luffacylindrica Under Natural, Rigid

And Flexible Resin To Obtain A Natural Composite Material Daniela

RINCON P, Carlos A. Guerrero F, Fabio E. Sierra, Eliana Guerrero-

Romero (U. Colombia)

Evaluation Of Thermal Sprayed Polymers For Tribological

Applications Carlos R. C. LIMA, Lucas P. Siqueira (UNIMEP, SP, Brazil),

Flávio Camargo (OGRAMAC, SP, Brazil)

Investigation Of Powder Metallurgy Application For Uncooled

Turbines Herny EMILIE (Toulouse, France), Xinhu Wu (U. Birmingham,

UK), Jean-Francois Rideau (Toulouse, France)

Hereditary Type Model For Mechanical Behavior Of Viscous Polymers

Sofia ALEXEEVA, Alexander Mosin (Moscow, Russia) chair

Improved Mechanical Properties Of Aluminium/Epoxy Composites

Through Silane Functionalization Of Aluminium Powder Jorge Ivan

CIFUENTES, Jason Marroquin (Kyung Hee U., Yongin, S. Korea)

Nanostructured Composites: Potential Materials For Organic Light

Emitting Diodes And Organic Solar Cells NGUYEN Nang Dinh, Dinh

Van Chau, Do Ngoc Chung, Nguyen Phuong Hoai Nam (Vietnam Nat. U.

Hanoi), Tran Quang Trung (Vietnam Nat. U., HCM city)

5:30PM-6:00PM Break

Session 15a MATH 15

Thursday 6:00PM-9:00PM Ballroom 1

Chairs: N. Allen Yu, C. Bal, A. Yasin, W.Z. Dai

The Frictional Effects In Harmonic Circuit

Carmen BAL, Carmen Ioana Iuhos, Nicolae Bal

(TU Cluj Napoca, Romania)

The Blind Hole Influence In The Residual

Stresses Determination

Nicolae BAL, Carmen Ioana Iuhos, Carmen Bal

(TU Cluj Napoca, Romania)

Maximum Amplitude of Solutions on a Ball

for a Generalized Lane-Emden Equation

Abeer YASIN (U. Western Ontario, Canada)

Optimal Vibration Control of Smart Fibre

Reinforced Polymer Spherical Shells

Debabrata CHAKRABORTY, Tarapada Roy

(Indian Inst. Tech. Guwahati)

A Numerical Method for Studying Thermal

Deformation in 3D Double-Layered Thin

Films with Imperfect Interfacial Thermal

Contact Exposed to Ultrashort-Pulsed Lasers

Runzhou Liu, Weizhong DAI (Louisiana Tech.

U., Ruston)

Numerical Analysis of a Transversal Crack in

a Steel Slab

Frantisek KAVICKA, Jana Dobrovska, Karel

Stransky, Bohumil Sekanina, Josef Stetina (Brno

U.T., Czech Rep.)

Delamination Analysis At Free Edges Of

Composite Laminates Bosko RASUO. Mirko

Dinulovic (U. Belgrade, Serbia)

Fracture And Fatigue Of CNT-Reinforced

Composites Z.H. Zhang, N. Allen YU, M.M.

Huang, K.K. Hsu (Yuan Ze U., Taoyuan)

Session 15b METAL 5

Thursday 6:00PM-9:00PM Ballroom 1

Chairs: C. Bhat, M. Sob, B. Fischer,

Xiulan Hu

Strength And Magnetism Of Nanocomposites

Formed By 3d-Metal Nanochains Embedded

In A Non-Magnetic Matrix Mojmir SOB

(Masaryk U., Brno, Czech Rep.), T. Kana

(ASCR, Czech Rep.)

Further Development Of Oxide Dispersion

Hardened Platinum Alloyswith Improved

Strength At High Temperatures Bernd

FISCHER (U. Applied Sciences, Jena, Germany),

Uwe Jantsch, Michael Koch (Hanau, Germany)

Strengthen Mechanism Of In Situ TiB/TiC

Reinforced Ti 1100 Composites And Finite

Element Analysis Fei ZHAO (Shanghai

Jiaotong U., China), Xiaolu Gong (UT Troyes,

France), Di Zhang (Shanghai Jiaotong U.) A Novel Discharge Technique For Noble.Metal

Nanoparticles Xiulan HU, Osamu Takai, Nagahiro

Saito (Nagoya U., Japan) Wed-Fri

Evolution Of Goss Orientation During Rapid

Heating For Primary Recrystallization In Grain-

Oriented Electrical Steel Eun-Jin LEE, Sung-Ji Choi, No-Jin Park (Kumoh Nat. I.T., Gumi, S. Korea)

Effects Of Initial Microstructure On The

Development Of Microstructure And Mechanical

Properties In Energy Saving AZ31 Magnesium

Alloy During Hot Rolling No-Jin PARK, Sun-Hea

Hwang and Chang-Wan Ha (Kumoh Nat. I.T., Gumi, S. Korea)

Volatile Organic Compound Gas Sensor Based On

Meso-/Macro Porous Semiconducting Metal Oxide

Duc Hoa NGUYEN, Sherif A. El-Safty (NIMS,

Ibaraki, Japan) chair

Stir Casting Technique For Low Melting Point

Metal Matrix Composites And Characteristic Study

K. JAGANNATH, S.S. Sharma, N.S. Mohan, P.R.

Prabhu (Manipal, India)

Thermomechanical Structuring Of Steel For

Fabrication Of Ultrafine Grained Or

Nanocrystalline Materials Maria Z. BORISOVA, S.P. Yakovleva, S.N. Makharova(Yakutsk, Russia)

Session 15c MAGNETIC 9

Thursday 6:00PM-9:00PM Ballroom 1

Chairs: Jon-Ho Jeun, P. Yarlagadda, J.M. Kim

Effect Of Substrate Temperature On Physical

Properties Of Nanostructured Cds Thin Films

Prepared By Spray Pyrolysis Technique

N. Memarian, S.M. Rozati (U. Guilan, Iran) Thurs-Fri

Static And Dynamic Strain Sensing Using A Polymer

- Carbon Nanotube Film Strain Sensor Michael K. Njuguna, Cheng Yan, John M. Bell, Prasad

YARLAGADDA(Queensland U.T., Brisbane,

Australia) Thurs-Fri

Effect Of CdSe Nanoparticle In P3HT:PCBM

Organic Solar Cell Mijung CHOI (Myongji U.,

Gyeonggi, S. Korea), Honghong Fu, Weiling Luan (East China U.Sci.Tech., Shangha), Yong-Sang Kim

(Myongji U.) Wed-Fri

Organic Thin Film Transistor Memory Based On

CdSe Nanoparticle/PMMA Blend as a Tunneling

Layer Jung-Min KIM, Dong-Hoon Lee, Jun-Ho

Jeun, Hyun Ho Lee (Myongji U., Gyeonggi, S. Korea), Sung Sik Ko, Ik-Jun Yeon (Chungju N.U., Chungbuk,

S. Korea), Yong-Sang Kim (Myonggi U.) Wed-Fri

Microfluidic PCR CHIP Integrated With MCU

Controlled Temperature System

Dawoon HAN, Mijung Choi, You-Cheol Jang, Kamrul Islam, Rohit Chand, Sandeep K. Jha (Myonggi U.,

Gyeonggi, S. Korea), SungSik Ko, Ik-Jun Yeon

(Chungju N.U., Chungbuk, S. Korea), Yong-Sang Kim (Myunggi U.) Wed-Fri

A Study Of The Hysteresis Mechanism Of Organic

Thin Film Transistor With Poly(4-Vinylphenol)

Gate Insulator Jon-Ho JEUN, Jung-Min Kim, Dong-

Hoon Lee(Myongji U., Gyeonggi, S. Korea), Sung Sik

Ko, Ik-Jun Yeon (Chungju N.U., S. Korea),Yong-Sang Kim (Myongji U.) Wed-Fri

Physicotechnological Peculiarities Creating A New

Class Of Piezoelectric Materials Based On The

Hybrid Of Matrix Nano- And Micropiezoelectric

Composites M.K. Kerimov, M.A. Kurbanov, A.A.

BAYRAMOV, I.S. Sultanakhmedova, F.N. Tatardar,

A.A. Mextili, G.Ch. Gulieva, I.N. Orudjev (Nat. Acad.

Sci, Azerbaijan)

Session 15d NANO 7

Thursday 6:00PM-9:00PM Dalian Room

Chairs: B. Suresha, H. Musa, A.N. Banerjee, H. Hamdy, N.M. Renukappa

Synthesis And Characterisation Of Polymer-Stabilised AuNP

Haruna MUSA (Bayero U., Nigeria), Terence Cosgrove (U. Bristol, UK),

Erol A. Hasan (U. Liverpool, UK), Abdullahi A. Kogo (Ahmadu Bello U.,

Zaria, Nigeria), Hamza Abba (Ahmadu Bello U.)

Effect Of Low-Aspect Ratio On The Enhanced Field-Emission

Properties Of Densely-Packed Ni-Nanowire Arrays Electrochemically

Grown Through Porous Alumina Membrane Arghya N. BANERJEE,

Sang Woo Joo (Yeungnam U., S. Korea)

Fabrication of Transparent TiO2 Nanotubes-Film on FTO Glass By An

Electrophoretic Deposition Process Yulong LIAO, Wenxiu Que, Jin

Zhang, Peng Zhong (Xi’an Jiaotong U., China)

Cr Nanostructures Fabricated Based On Porous Anodic Alumina

Membranes Hany HAMDY (Beni-Suef U., Egypt), Sang-Wan Ryu

(Chonnam N.U., Gwangju,S. Korea), Mohamed Shaban (Ben-Seuf U.)

Strain Rate Effect On The Mechanical Properties Of Carbon

Nanotube/Epoxy Composites Yi-Ming JEN (Nat.Taiwan Ocean U.,

Keelung), Chien-Yang Huang, Pei-Ling Guo,Yung-Chuan Wang (Chung

Hua U., Hsinchu)

Properties Of Compression Moulding Starch –Nanoclay Biocomposites

Ahmad ZURAIDA, H. Anuar (IIUM, Kuala Lumpur, Malaysia)

Role Of Silicon Dioxide Filler On Dry Sliding Wear Behaviour Of

Epoxy Nanocomposites B. SURESHA, R.M. Devarajaiah

(Nat.Inst.Engrg., Mysore, India), K.N. Shivakumar (NCAT, Greensboro,

NC), Kishore (Indian Inst.Sci., Bangalore), S. Seetharamu,P.

Sampathkumaran (Central Power Res.Inst., Bangalore)

Effect of Montmorillonite Nanoclay Filler on Surface Degradation

Properties of Epoxy-Based Nanocomposites N.M. RENUKAPPA,

Rashmi, C. Ranganathaiah,Siddaramaiah (Mysore, India)

Session 15e GENERAL 15

Thursday 6:00PM-9:00PM Hangzhou Room

Chairs: W. Kong , W.B. Wan Nik, B.K. Ghosh, A.K. Tyagi,

Fabrication of Conjugated Polymer and Metal Nanoparticle

Composites toward Sensing Applications

Hsing-Lin WANG, Ping Xu, Chen-Yu Kuo, Nathan H. Mack(Los Alamos

N.L., NM)

Grown Ambient Effect In Gan Crystalline Quality On Si(111) By

MOVPE

Bablu K. GHOSH (U. Malaysia-Sabah), Akio Yamamoto (Fukui U., Japan)

Chemistry Of Some Oxide Based Nanomaterials For Energy

Conversion Applications

A.K. TYAGI (Mumbai, India) INVITED 25 min

Monitoring Composite Blade of Vertical Axis Wind Turbine using Self

Organizing Map

Ming Li, Ayo ABATAN (Miami U., Oxford, Ohio)

Increasing The Octane Number Of Gasoline Using Praseodymium(Iii)-

Ethylene Diamine Tetra Acetate/Activated Clinoptilolite Zeolite

Dewi TRISTANTINI, Eny Kusrini, Vino Hasyim (U. Indonesia, Depok)

Friction Coefficients Of Boron Mixed Brake Pads

A.M. Muzathik, Y.B. Mohd Nizam (U. Malaysia Terengganu), Y. Prawoto

(U. Moratuwa, Sr. Lanka), M.F. Ahmad, W.B. Wan Nik (U. Malaysia

Terengganu)

Thermoplastic Elastomer Composites for Barrier Applications

Junling ZHAO (Goodyear Tire & Rubber, Akron, OH)

Session 16a MATH 16

Friday 8:00AM-10:30AM Ballroom 1

Chairs: Yin Yu, K.M. Gupta, R.H. Oskouei,

H. Abral

Effect Of Poisson’s Ratio On Flexibility Of

Smooth Orthotropic Pipe Bend

K. M. GUPTA (Motilal Nehru Nat.Inst.Tech.,

India)

Load-Displacement Behaviour of AA 7075-T6

Holed And Clamped Plates At Different

Environmental Temperatures R.H.

OSKOUEI, Joe Elambasseril, R.N. Ibrahim

(Monash U., Clayton, Australia)

Meshless Methods For The Quasi-3d Analysis

Of Functionally Graded Elastic Cylinders

Chih-Ping Wu, Shih-Wei Yang (Nat. Cheng

Kung U., Tainan)

Modeling Of Creep Behaviour Of A

Composite Material Ahmed KOUADRI-

Boudjelthia (Chlef, Algeria), A. Bouabdallah

(Algiers, Agleria), M. Tahar Abbes (Chlef,

Algeria)

Effect of Debonding Damage on the

Mechanical Properties of a Particulate

Reinforced Dental Composite Y.P. CHAN,

C.Y. Tang (Hong Kong Poly U., China) Thurs-

Friday

The Research Of Debonding Damage

Identification For Foam Core Sandwich Using

Wavelet Packet Energy Method Yin YU, Hai

Wang (Shanghai Jiaotong U., China), Ai-ying

Zhao (COMAC, Shanghai, China) Thurs-Fri

Nonlinear Modeling And Optimization Of

Parameters For Viscoelastic Composites

AnNanocomposites Brian Dandurand, Irina

VIKTOROVA (Clemson U., SC), Sofia Alexeeva

(Moscow, Russia)

Session 16b METAL 6

Friday 8:00AM-10:30AM Ballroom 2

Chairs: J. Purmensky, P.S. Robi, Y. Kobayashi,

Mechanical Properties of Al-Cy-Mg Alloys

Micro-Alloyed with Sn P.S. ROBI, A.

Srinivasana, Sanjib Banerjee (Indian I.T.,

Guwahati)

Characteristics of CrAlSiN Coatings With

Post-Deposition Annealing Treatment

Wei-Yu HO, Chi-Wei Chen, Chia-Hang Tsai, Da-

Yung Wang (MingDao U., ChangHua)

Residual Stress Measurement On 2024

Aluminum With Different SMAT Treatments

Hao JIANG, Ka Po Cheung, Limin Zhou (Hong

Kong Poly U., China), Jian Lu(City U., Hong

Kong, China)

Metal-Metal Bonding Process Using Copper

Nanoparticles

Yoshio KOBAYASHI, Satoshi Ishida, Kazuaki

Ihara (Ibaraki U., Japan), Yusuke Yasuda,

Toshiaki Morita (Hitachi Ltd, Japan) Wed-Fri

Phase Separation Related To Medium Range

Order In Crystallization of Al83Ni8Si2Ce7

Metallic Glass Shanghai WANG, C.C. Yang

(Hebei U. Engineering, Handan, China)

Effects Of Electro-Discharge Machining

Parameters On Surface Integrity Of

Aluminium Composite

A.M. ABDUL-RANI, A. Mouangue Nanimina

(U.T. Petronas, Perak, Malaysia)

Structure And Mechanical Properties Of

Ultra-Fine Grain Titanium

Miroslav Greger, Jaroslav PURMENSKY (T.U.

Ostrava, Czech Rep.) An Analysis Of The Transverse Strength Of Ti-

Based Matrix Composite Reinforced By SiC Fiber Bing ZHAO, HongLiang Hou, JinHua Liao, Bo Jiang

(Beijing Aero. Manuf.Res.Inst., China)

Session 16c CHEM 5

Friday 8:00AM-10:30AM Ballroom 3

Chairs: T. Ngai, C.Y. Low, V.R. Gaval, S.K.

Varma

Pressure-Volume-Temperature Of Neat

Polyvinyl Alcohol And Blending With

Cassava Starch Compound

Chong-Yu LOW, Tin-Sin Lee (UTAR,

Kuala Lumpur, Malaysia)

Effect Of Particle Size And Concentration

Of Mica On Properties Of

Polytrimethylene Terepthalate Vivek. R.

GAVAL, R.S.N. Sahai, S.P. Deshmukh, P.A.

Mahanwar (Inst. Chem. Tech., Mumbai,

India)

Effect of Cr on the Oxidation Resistance

Of Nb-Cr-Mo-Si-B Alloys S.K.

VARMA, Benedict Portillo (U. Texas El

Paso)

The Effects of Functionalized Graphene

Sheet on The Properties of Poly (ethyl

methacrylate) Su-Jin HAN, Seong Min

Oh, Hyung-il Lee, Han-Mo Jeong (U.

Ulsan, S. Korea)

Fire Retardation Effect Of Graphite

Oxides On Epoxy Resin Kyung Min OH,

Yu Rok Lee, Soon Cheol Kim, Hyung-il

Lee, Han-Mo Jeong(U. Ulsan, S. Korea)

Hierarchical Porous Materials

Templating from Nanoparticle-Stabilized

Emulsions

To NGAI, Zifu Li (Chinese U. Hong Kong)

Session 16d BIO 5

Friday 8:00AM-10:30AM Dalian Room

Chairs: Liming Xu, R.H. Schuster, A. Aldalbahi, Chao Lin

Fabrication of Poly(propylene carbonate)/Gelatin Composite via

Layer-by-Layer Assembly for Cytocompatibility Assessment

Xia ZHONG, Fariba Dehghani (U. Sydney, Australia)

Preparation And Characterisation Of Conducting Biopolymer-Carbon

Nanotube Composite Materials Ali ALDALBAHI, Marc in het Panhuis

(U. Wollongong, Australia)

Are NHANES Reference Data Applicable to the Taller Canadian

Children?

FILLER, Abeer Yasin (U. Western Ontario, Canada)

Multifunctional Cationic Superparamagnetic Nanoparticles For Gene

Delivery And Imaging

Chao LIN (Tongji U., Shanghai, China), Qianqian Ma (Tongji Hospital),

Bo Lou (Tongji U.)

Nanocomposite Thin Layers Synthesized By Advanced Pulsed Laser

Technologies For Biomimetic Implant Coatings

Ion N. MIHAILESCU (Ilfov, Romania)

Noise Corrected Imaging Plate Scanner – An Ideal Electron Detector

For Transmission Electron Microscopy

Petra BELE (TU Munich, Germany)

In Vivo And In Vitro Toxicity Of Ag-Nps-Containinghydrogel In

Reproductive Organs And In Hela Cells

Liming XU, Liang Chen, Xuefei Li, Zhe Dong (Nat. Inst Food Drug

Control, Beijing, China), Gang Wu (Inner Mongolia U. Sci Tech, Baotou,

China),Chunren Wang, Tingfei Xi (Beijing, China)

Session 16e GENERAL 16

Friday 8:00AM-10:30AM Hangzhou Room

Chairs: R.S.N. Sahai, F.A. Harraz, Y.F. Luo, A.A. Ali

Silicon-Conjugated Polymers Nanocomposites Fabricated By A Two-

Step Electrochemical Approach

Farid A. HARRAZ, Aliaa M. Salem (CMRDI, Cairo, Egypt)

Characterization Of Carbon Fibres Reclaimed From Steam-Thermal

Recycling Process

Shengyin YE, Arezki Bounaceur, Yannick Soudais, Radu Barna (Ecole des

Mines d’Albi, France)

Important Design Elements of Large Flexible Ferris Wheels

Yongfeng LUO, Jie Bai, Xiaonong Guo (Tongji U., Shanghai, China)

Wet Electrospun CuNP/Carbon Ultra Fine Coils for Super Air Core

Inductors Awad Kh. Al-ASMARI (King Saud U., Saudi Arabia), Ashraf

A. Ali (Al-Khari U.,Saudi Arabia)

Wet Electrospun CuNP/Carbon Nano Fibril Composites: Potential

Application for Micro Surface Mounted Components Ashraf A. ALI (Al-Kharj U., S. Arabia),Awad Kh. Al-Asmari (King Saud

U., Saudi Arabia)

Nano Loop Optical Antenna

Hengjiang Ren, Zhongxiang SHEN (Nangyang T.U., Singapore)

Composite Repair Using VARTM Techniques

Ronald Sterkenburg, PengHao WANG (Purdue U., West Lafayette, IN)

Effect of Particle Size And Concentration Of Fly Ash On Properties Of

Polyester Thermoplastic Elastomer Composites

R.S.N. SAHAI, V.R. Gaval, P.A. Mahanwar (Inst. Chem Tech., Mumbai,

India)

10:30AM-11:00AM Coffee Break

Session 17a OXIDE 4

Friday 11:00AM-1:30PM Ballroom 1

Chairs: M. Truccato, Xiaoyan Peng,

Y. Nakamura, K. Uchiyama

Fabrication Of Intrinsic Josephson Junctions

Stacks And Loosely Bound Atoms In

Superconducting Oxides Marco TRUCCATO,

Angelo Agostino, Stefano Cagliero (Torino U.,

Italy), Holger Motzkau, Andreas Rydh, Vladimir

Krasnov (Stockholm U., Sweden) INVITED

Stimuli-Responsive Periodic Micro Structures

On Oxide-Polymer Hybrid Films

Masahide TAKAHASHI, Yasuaki Tokudome

(Osaka Prefecture U., Japan) INVITED

Li1.6[MnM]1.6O4 (M=3d Transition Metal)

Spinel Type Manganese Oxides Prepared By

Hydrothermal Method Kang-Sup CHUNG

(Korea Inst. Geosci. & Min Res., Daejon, S.

Korea), Wonjin Moon, Kyoungshin Lee,

Byungkyu Park (Korea Basic SCi Inst,

Suncheon), Sujin Pang (Chonbuk Nat. U.), Soon-

Ki Jeong (Soonchunhyang U.), Hyejin Seo,

Daehee Won (Suncheon Nat. U.), Yangsoo Kim

(Korea Basic Sci Inst., Suncheon)

Growth of Catalyst-free SiC and SiC/SiO2

Nanowires using the Precursor of

Methyltrichlorosilane Yoo Youl CHOI, Doo Jin

Choi (Yonsei U., Seoul, S. Korea)

Structural Degradation And Sensing

Properties Of ZnO Nano Films

Xiaoyan PENG, J. Chu, M. Sajjad, P.X. Feng (U.

Puerto Rico, San Juan)

Rheological Properties Of Polyethylene-

Copper Oxide Composites

`Tiam-Ting TEE, Tin-Sin Lee, Yew-Sing Chin

(UTAR, Kuala Lumpur, Malaysia)

Microstructure of Magnetron Sputtered ZnO

Films on Glass Substrate

Shiuh-Chuan HER, Tsung-Chi Chi (Yuan Ze

Univ., Chung Li)

Session 17b MAGNETIC 10

Friday 11:00AM-1:30PM Ballroom 2

Chairs: F.c. Meng, J.A. Perez, Z.A. Talib,

Keryn Lian

Effect of Injection Molded

Nanoparticle/Polymer Composites on Their

Electrical Properties Haihong WU, Tiecheng

Li (Henan U.T., Zhengzhou, China), Aiyun Jiang,

Baofeng Zhang (Huanghe Sci.Tech. U., China)

Carbon Naotube Composite Films With

Switchable Transparency Fancheng MENG,

Xiaohua Zhang, Geng Xu, Zhenzhong Yong,

Hongyuan Chen,Minghai Chen, Qingwen Li

(Suzhou Inst Nanotech & Nanobionic, China),

Yuntian Zhu (N.Carolina St.U., Raleigh)

Phase Transition And Magnetic Properties Of

Ferromagnetic Shape Memory Fe66Pd30Rh4

Alloys Chien-Feng LIN, Jin-Bin Yang (Nat.

Kaohsiung First U. Sci Tech.)

Optical Properties Dependence As Function

Of The Temperature In Aln Films Deposited

By PLD Jaime A. PEREZ, H. Riascos (U.T.

Pereira, Colombia), J.C. Caicedo (U. Valle, Cali,

Colombia), L. Yate (U. Barcelona, Spain)

Beyond Complementary Metal Oxide

Semiconductor (CMOS): Materials and

Engineering Arezki BENFDILA (Univ. M.

Mammeri, Algeria)

Structural and Electrical Properties of Tin

Selenide Film Z.A. Talib, J.Y.C. Liew, W.M.M.

Yunus, Z. ZAINAL, S.A. Halim (U. Putra

Malaysia, Selangor)

Biomaterial Aisi 316l Ss Surface Film Analyses

After Electropolishing Treatments Under

Varied Magnetic Fields Tadeusz

HRYNIEWICZ, K. Rokosz (Koszalin, Poland)

Polyoxometalates - Carbon Nanotubes

Composites For Electrochemical Capacitors

Tahmina Akter, Gurvinder Bajwa, Keryn LIAN

(U. Toronto, Canada) Thurs-Fri

Session 17c INFRA 9

Friday 11:00AM-1:30PM Ballroom 3

Chairs: Con Y. Adam, S.I. Zaki, Q.H. Fang,

D. Matesan

The Use Of Nanocomposites To Develop The

Microstructure And Impermeability Of High

Performance Concrete Saaid. I. ZAKI ,

Khaled. S. Ragab, Alaa. M. Rashad (HBRC,

Cairo, Egypt)

Pultruded Natural Fibre Reinforced

Composites: Preparation, Properties and

Applications HAZIZAN Md Akil, Hafiz Zamri,

Helfy Affzan Shahidan, Zainal Arifin Mohd

Ishak, Azhar Abu Bakar (U. Sains Malaysia,

Penang) The Distributions Of The Interfacial Shear Stress

For A Single Cord/Rubber Composite In Pulling

Out Process Under Thermal Conditions Qinghong

FANG, Taimin Cheng, Huibin Wang, Baozong Huang

(Shenyang U. Chem.Tech., China), David Hui (U.

New Orleans)

Preparation Of Clinker Cementitious

Materials By Re-Melting Steel Slag

Hui LI, Delong Xu, Yong Min, Yuxiang Li, Yang

Qiu, Hongyuan Peng (Xi’an U.Architecture &

Tech., China) Discussion of Some Issues For Building Integrated

Photovoltaics (BIPV) in Architectural Design In

China Changhai PENG, Ying Huang , Zhishen Wu

(Southeast U., Nanjing,China)

Strength Capacity Of One-Way Continuous

Reinforced Concrete Slabs Domagoj Matesan, Jure

Radnic, Nikola GRGIC, Vatroslav Camber (U. Split, Croatia)

Effect Of Finger Joint Size And Orientation On The

Tension Strength Of Eucalyptus

Regnans/Delegatensis Con Y. ADAM, B M Ahmed

(Monash U., Melbourne, Australia)

Strengthening of Reinforced Concrete Beams using

Carbon Fiber Sheets bonded with

Cement-Based Mortars. Abdullah Hilal Al-SAIDY

(Sultan Qaboos U., Oman)

Session 17d NANO 8

Friday 11:00AM-1:30PM Dalian Room

Chairs: I. Kratochvilova, X. Bokhimi, B. Zhang, V. Koerstgens

Processing Of Nanomaterials In The C-B-N System

Raj N. SINGH (U. Cincinnati, OH)

Effect of the Activation Atmosphere on the Gold-Support Interaction in

Au/Rutile Catalysts Xim BOKHIMI, Rodolfo Zanella, Antonio Morales,

Viridiana Maturano, Carlos Angeles (UNAM, Mexico DF)

Facile Preparation And H2 Separation Of Multi-Walled Carbon

Nanotube Buckypaper Membranes With Tunable Pore Sizes

Xiaoshuang YANG, Lixiang Yuan, Andrew I. Minett, Andrew Harris (U.

Sydney, Australia)

Semicrystalline Polyimide/Mwcnt Hybrid Nanocomposites:Structure,

Dynamics, And Properties Baode. ZHANG (Harbin I.T., China), V. A.

Bershtein (Ioffe, Russia), T.E. Sukhanova (ST. Petersburg, Russia),

Wanchen. Zang (Jilin U., Changchun, China),P.N. Yakushev (St.

Petersburg), Yao. Li (Harbin I.T.), Chunhai. Chen (Jilin U.), L.M. Egorova,

I.V. Gofman , G. N. Gubanova, A. Y. Volkov, M. E. Vylegzhanina (St.

Petersburg)

Flow Induced Surface Attachment Of Gold Nanoparticles – An In Situ

X-Ray Investigation With Micro-Fluidic Cell Volker KOERSTGENS,

Monika Rawolle (TU Muenchen, Germany), Adeline Buffet, Gunthard

Bennecke, Gerd Herzog, Jan Perlich, Matthias Schwartzkopf (DESY,

Hamburg, Germany), Martin Trebbin, Julian Thiele,Sebastian With (U.

Bayreuth, Germany

Toughening Epoxy Thermosets And Their Carbon Fibre Reinforced

Composites With Electrospun Nanofibres Jin Zhang, Tong LIN,

Xungai Wang (Deakin U., Geelong, Australia)

Fluorescence of Variously Terminated Nanodiamond Particles

Irena KRATOCHVILOVA, A. Kovalenko, V. Rezacova, L. Fekete, F.

Fendrych,S. Zalis (Prague), V. Kocka (Charles U., Prague), M. Ledvina, P.

Cígler, J. Stursa (Prague), M. Nesládek (Diepenbeek, Belgium)

Session 17e GENERAL 17

Friday 11:00AM-1:30PM Hangzhou Room

Chairs: C.N. Suresha, Yulong Wang, J.F. Shu, A.M. Eleiche

Improved Interfacial Strength of SMA Composite With Nanotreated

Fibre Surface

Yulong WANG (Hong Kong Poly U., China), Zhenqing Wang (Harbin I.T.,

China), Limin Zhou (Hong Kong Poly U., China)

Study of the Efficiency of UV and Visible-Light Photocatalytic

Oxidation of Methanol on Mesoporous RuO2-TiO2 Nanocomposites

Adel A. ISMAIL (CMRDI, Cairo, Egypt), Detlef W. Bahnemann (U.

Hannover, Germany)

Micro-Nano Mineral Study And New Mineral Discovery

Jinfu SHU (Carnegie Inst. Of Washington, DC), Jingsui Yang, He Rong

(Inst of Geology, Beijing), Ho-kwang Mao (Carnegie Inst.)

Design Of A Polyamide Composite For High Speed Sliding Conditions

A.M. ELEICHE (King Fahd U. Pet Min, Dhahran, S. Arabia), M.O.A.

Mokhtar (Cairo U., Egypt), E.S. Nasr, G.M.A. Kamel

Characterization Of The Durability Of Surface Treatments Used In

Adhesive Bonding

Susan PITT, Daren Peng, Rhys Jones (Monash U., Australia)

Development of Composite Structural Parts for a Vertical-axis Wind

Turbine Tai-Yan KAM, H.M. Su, R.R. Chang, F.M. Lai, J.H. Wu (Nat.

Chiao Tung U., Hsinchu)

Controlled Synthesis of Sb Nanostructures and Their Conversion to

CoSb3 Nanoparticle Chains for Li-Ion Battery Electrodes Jixin Zhu,

Qingyu YAN (Nanyang T.U.,Singapore)

Development Of A Model For Online Monitoring Of Friction Stir

Welding Using Acoustic Emission Technique C.N. SURESHA, B.M.

Rajaprakash B M, Upadhya Sarala (U. Bangalore, India)

1:30PM-2:30PM Lunch

Session 18a TEXTILE 4

Friday 2:30PM-5:00PM Ballroom 1

Chairs: Wen-Ju Chuang, Shuai Jin, H.N. Tran,

An Du

Stimuli-Responsive Polymer Nanofiber with

Inorganic Nanoparticle Wen-Ju CHUANG,

Wen-Yen Chiu (Nat. Taiwan U., Taipei) Wed-Fri

Study On Test Method For Shear Properties

Of Minisize Rod―Z-Pin Ning Li, J. XIAO

(NUAA, Nanjing, China)

Effects Of Ultraviolet Aging On The

Mechanical Properties Of Hemp Fibers

Shuai JIN, Xiaolu Gong (U.T. Troyes)

Mechanical Properties Of Unidirectional Jute

Fiber Reinforced Poly(Butylene Succinate)

Biodegradable Composites Huu Nam TRAN,

Shinji Ogihara (Tokyo U. Sci., Japan)

Water Permeation In Polylactide And

Polylactide/Montmorillonite Composites

An DU, Donghun Koo, Mary Ziegler, Richard A.

Cairncross (Drexel U., PA), Genaro Gelves,

University of Calgary, Calgary Advanced Application Of Natural Fibres In High

Performance Automotive Composite Structures

V.R Soroush, Hessam GHASEMNEJAD, D.R.

Marchant, A. Aboutorabi (Kingston U., London, UK)

Chemically Modified Glass and Cotton Fibres

Reinforced Polyester Resins

A.A. KOGO, O.K. Sunmonu, E.G. Kolawole (Ahmadu Bello U., Zaria, Nigeria)

Effect Of Coupling Agent On The Interfacial

Properties of 3D Ramie/Polypropylene Composites

Yang SHEN,Jianmeng Zhao, Nanting Zhou, Qian

Zhang, Xiaomeng Fang, Yiping Qiu (Donghua U.,

Shanghai, China)

Session 18b INFRA 10

Friday 2:30PM-5:00PM Ballroom 3

Chairs: Jinmiao Tan, Min Li, Y.Yu,

Sing-Ping Chiew Preparation And Thermal Properties Of Expanded

Graphite/ Organic Montmorillonite /Paraffin

Composite Phase Change Materials Jinmiao TAN, Min Li, Zhishen Wu (Southeast U., Nanjing, China)

Preparation And Performance Montmorillonite

/Polyacrylamide Composite Materials Min LI, Meirong Chen, Zhishen Wu (Southeast U., Nanjing,

China)

Effect of Basalt Fiber-Wood-Plastic composite by

Added MAPE Yong WANG, Jinxiang Chen,

Chenglong Gu, Juan XIE, Sujun Guan (Southeast U.,

Nanjing, China)

Experiments On CFRP Strengthened Steel Beams

With Different Laminate Ends

Yi YU, Sing-Ping Chiew (Nanyang T.U., Singapore)

Thurs-Fri

RC Columns With High Cross-Sectional Aspect

Ratio Wrapped With Glass Fiber Reinforced

Polymer Sheets Sing-Ping CHIEW, Yi Yu (Nanyang

T.U., Singapore) Thurs-Fri

Fiber Composite Application To Protect Bridge Pier

Caps From Corrosion Related Deterioration In New

England K. Wayne LEE, Rachel Nichols (U. Rhode Island, Kingdton, RI), Craig M. Boyer (Electric Boat),

P. Balaguru (Rutgers, NJ), C. Franco(Rhode Island

Dept of Trans.) Friday PM

The Experimental Study For FRP Flange Structural

Characteristics M. WANG, Z.M. Huang (Tongji U.,

Shanghai, China)

Performance Of Concrete Columns Reinforced By

Steel-Frp Composite Bar Under Static Loading And

Dynamic Excitation Ze-Yang SUN (Concrete & Prestressed Lab, Nanjing), Gang Wu, Sheng-Ze Yang,

Zhi-Shen Wu (Southeast U., Nanjing, China)

Session 18c COMPOSITES 3

Friday 1:30PM-4:00PM Ballroom 2

Chairs: J. Kong, L. Feo

Nanocomposite Films Exhibiting Self-

Assembled Alternating Layers

Wan-Yu WU (Mingdao U., Changhua)

Stable Photocatalytic Properties Of Lithium

Niobate Spheres For The Degradation Of

Organic Pollutants Jingling LIU, Dae Joon

Kang (Sungkyunkwan U., Suwon, S. Korea)

Failure Estimate Of Layered Fiber-Metal

Laminates Using Experiment And Finite

Element Techniques Adam DACKO (Warsaw

U.T., Poland)

Effect Of Orientation Of Axis Of Symmetry

For Orthotropic Media Containing An

Elliptical Inhomogeneity On Elastic Field

G.N. WANG, G.H. Nie (Tongji U., Shanghai,

China), C.K. Chan (Hong Kong Poly U., China)

Research Progress of Secondary Bending in

Composite Joints Yuan Fa, Guoqing Yuan

(Tongji U., Shanghai, China)

Structural Design Optimization Of A Desktop

Machine Tool For Machining Ti Alloy By

Using Taguchi Method Based Sequential

Algorithm Sung-Hyun Jang , Sang-Hwa Lee

(Changwon N.U., S. Korea), Jay Kim (VATECH,

Gyeongsangnam, S. Korea), Young-Hyu Choi

(Changwon N.U.)

Fe3O4 / Thermo-Responsive Polymer

Composite Nanofibers

Shih-Ru HUANG, Wen-Yen Chiu, King-Fu Lin

(Nat. Taiwan U., Taipei)

Session 18d NANO 9

Friday 2:30PM-5:00PM Dalian Room

Chairs: SeungWook Shin, Y. Wang, Liqiang Mai, Xiuchun Yang

Modifying Polylactide and Polycarbonate Green Blends for Durable

Applications

Yeh WANG, T.-F. Hung, S.M. Chiao (Tunghai U., Taichung) INVITED 25

min Friday

Mechanical Properties Of Spark Plasma Sintered Al2O3-ZrO2-TiO2

Composites Ipek Akin, Filiz Sahin, Onuralp Yucel, Gultekin GOLLER

(Istanbul T.U., Turkey)

Layered Oxide Nanowires For High-Energy Lithium ION Batteries

Liqiang MAI, Lin Xu, Xu Xu, Chunhua Han, Yanzhu Luo (Wuhan U.T.,

China)

Surface Plasmon Resonance Of Ag Nanocrystallines In Opaa Template

Shanshan Han, Xiuchun YANG, Yan Liu, Junwei Hou, Xiaoning Li, Wei Lu

(Tongji U., Shanghai, China)

Atomic Mobility, Freezing, And Superconductivity In Arrays Of

Metallic Particles Within Nanoporous Matrices

Elena V. CHARNAYA (Nat. Cheng Kung U. and St.Petersburg St.U.),

Cheng Tien, M. K. Lee (Nat. Cheng Kung U.), D.Y. Xing (Nanjing U.,

China), B.F. Borisov, Yu. A. Kumzerov (Ioffe Physico, St. Petersburg,

Russia)

Synthesis of Cu2ZnSnS4 Quaternary Nanocrystal Formed by Annealing

Precursors Prepared by Microwave-Assisted Solution Method

SeungWook Shin, JunHee Han(KAIST, Daejeon, S. Korea), ChanYoung

Park, Jong-Ha Moon (Chonnam N.U., Gwangju, S. Korea), JeongYong

Lee (KAIST), JinHyeok Kim (Chonnam N.U.) Thurs-Fri

Sol Gel Derived Bioactive Glass Nanoparticles in the SiO2-CaO-MgO-

P2O5 System M.R. SAERI, A. Doostmohammadi (Shahrekord U., Iran)

Thurs-Fri

Effects Of Diameter And Stone-Wales Defect On The Functionalization

Of Single-Wall-Carbon Nanotubes By Amine Group Jun CHEN,

Bessem Ben Doudou, Alexandre Vivet, Gerard Nouet, M’hamed Ayachi (U.

Caen, France)

Session 18e GENERAL 18

Friday 2:30PM-5:00PM Hangzhou Room

Chairs: Ping Yang, H. Anuar, Rusli, Marek Burda

Optimal Design of Molded Bark Particleboard Used in Heated

Flooring System by using Finite Element Analysis Ping YANG

(Kumamoto U., Japan), Hidefumi Yamauchi (Akita Pref. U., Japan), Hikaru

Sasaki (Helix Ltd, Akita, Japan)

Laser Repair Hardfacing Of Titanium Alloy Turbine Blades

Andrzej A. KlimpeL, Marek BURDA (Silesian U.T., Gliwice, Poland)

Energy Harvester Device For Charging Applications

A.R. AKANDE, A. Nechibvute, P.V.C Luhanga (U. Botswana)

Mechanical Properties Of Injection Moulded Polylactic Acid – Kenaf

Fibre Biocomposites

Hazleen ANUAR, A. Zuraida (IIUM, Kuala Lumpur, Malaysia)

High Efficiency Si-nanowires/Poly (3,4-Ethylene-Dioxythiophene):

Poly(Styrenesulfonate) Hybrid Solar Cells

Lining He, RUSLI (Nanyang T.U., Sinagpore), Changyun Jiang (A*STAR,

Singapore), Hao Wang (Nanyang T.U.) Thurs-Fri

Luminescence Light Waveguide And Lasing Properties In Some Doped

II-Visemiconductor Nanowire Bingsuo ZOU, Guozhang Dai, Ruibin

Liu (Beijing Inst.Tech., China) Thurs-Friday

Smart Materials Tectonics: Development Of Solid Electrolyte

Dendrites With Micro Lattice Structures To Realize Fuel Cell

Miniaturizations Soshu KIRIHARA, Katsuya Noritake, Satoko Tasaki

and Hiroya Abe (Osaka U., Japan) Wed-Fri

Design Of Clamping Apparatuses And Testing Procedures Of A

Vertical-Axis Composite Wind Power System Feng-Min LAI, Chao-

Chieh Yang, Chen-Mao Yang, Chun-Hsiang Lan (Da-yeh U., Changhua)

Friday

July 29, 2011 Friday night BANQUET 7:00PM-11:00PM

PVG airport to our hotel, you can take subway (inside the Puding airport) No.2 line for 14 stops and get off at Century Avenue Stop. Then transfer subway No.4 line for 2 stops and get off at Yang Shu Pu Road Stop. Lastly, you can take a taxi to Wyndham Bund East Shanghai(No.25 Ning Guo Road) and the fare is around RMB15. The cost is RMB160 by taxi from PVG airport to hotel.

Our hotel name is Wyndham Bund East hotel, 上海兴荣温德姆酒店， the address is 宁国路 25 号。