ibm certified deployment professional - tivoli … certified deployment professional - tivoli...

IBM Certified Deployment Professional - Tivoli Netcool/Impact V6.1

Number: C2010-573Passing Score: 800Time Limit: 120 minFile Version: 1.0

http://www.gratisexam.com/

Exam A

QUESTION 1An IBM Tivoli Netcool/lmpact V6.1 system is configured to perform event enrichment by retrieving ObjectServerevents which have an empty Location field. Which Service Log can be used to verify that Netcool/lmpact isselecting events from the ObjectServer based upon that condition?

A. the PolicyLogger serviceB. the PolicyActivator serviceC. the OMNIbusEventReader serviceD. the OMNIbusEventListener service

Correct Answer: CSection: (none)Explanation

Explanation/Reference:Explanation:

QUESTION 2Which command line function should be executed prior to applying a product fix or upgrading the IBM TivoliNetcool/lmpact Server as best practice?

A. nci_cryptB. nci_policyC. nci_triggerD. nci_export

Correct Answer: DSection: (none)Explanation


QUESTION 3How is the name of the IBM Tivoli N etcooI/Imp act Server Instance on the console identified?

A. check the IBM Installer utility litslll.sh to show the Impact Server Instance Names that have been set upB. check the TIPProfile/logs/server1 directory - the SystemOutlog holds the Impact Service Instance nameC. use the nci_server command line utility to show the Impact Server Instance Names that have been set upD. check the impact/etc directory - all Impact Server Instance-related files use the Instance Name

in the beginning of every file name



QUESTION 4In which folder are the IBM Tivoli Netcool/lmpact V6.1 service logs stored?

A. $NCHOME/logs

B. $IMPACT_HOME/logC. $IMPACT_HOME/IogsD. $IMPACT_HOME/services/logs



QUESTION 5A new Impact Server will be installed using the console mode of the installer application. Which statement istrue?

A. All default ports must be available.B. The installer will not check if the required ports are available.C. A starting point of ports can be selected if the default ports are not available.D. The installer will adapt the required ports if some are tested as in use during the installation.



QUESTION 6In order for IBM Tivoli Netcool/lmpact V6.1 to start using the ObjectServer for authentication, the server mustbe configured so that it can map the roles that the application exposes to groups and/or users managed in IBMTivoli Netcool/OMNIbus. Which file must be edited for this purpose?


A. omnibus.confB. omnibususersC. guiserver.settingD. objectserver.conf



QUESTION 7On a server with only command line access, the server in an IBM Tivoli Netcool/lmpact cluster is identified asacting as a primary server by using which command line utility?

A. nci_serverB. nci_triggerC. nci_get_primaryD. nci_findendpoint



QUESTION 8Which component of IBM WebSphere is installed with IBM Tivoli Netcool/lmpact V6.1?

A. WebSphere MQB. WebSphere Portal ServerC. WebSphere Process ServerD. Embedded WebSphere Application Server



QUESTION 9What is the purpose of a project in IBM Tivoli Netcool/lmpact V6.1?

A. It allows for creating subsets of the elements stored in the global repository.B. It allows for creating subsets of the elements stored in the Impact repository.C. It allows for creating subsets of the elements stored across cluster members.D. It allows for creating supersets of the elements stored in the global repository.

Correct Answer: ASection: (none)Explanation


QUESTION 10Which three IBM Tivoli Netcool/lmpact roles in Tivoli Integrated Portal can be used to control users access tonavigation pages in the GUI and to permit users to unlock their own files?

A. impactSuperUser. impactFullAccessUser, and impactOpViewUserB. impactAdminUser, impactReadWriteUser, and impactOpViewUserC. impactAdminUser, impactFullAccessUser, and impactOpViewUserD. impactAdminUser, impactFullAccessUser, and impactReadOnlyUser



QUESTION 11Which step is required to design an IBM Tivoli Netcool/lmpact V6.1 solution from stakeholder requirements?

A. Determine if the correct Java version is installed.B. Create an architecture and a raw functional design of policies.C. Determine if enough disk space is provided on the installation servers.D. Interview the operational staff to determine their most efficient way to resolve a problem

Correct Answer: BSection: (none)Explanation


QUESTION 12What are two ways Data Source Adapters are used in IBM Tivoli Netcool/lmpact V6.1? (Choose two.)

A. to monitor Netcool/lmpact servicesB. to communicate with external data sourcesC. to extend the capabilities of Netcool/lmpactD. to apply product fixes to the Netcool/lmpact ServerE. to start the policy logging service in Netcool/lmpact

Correct Answer: BCSection: (none)Explanation


QUESTION 13Given only command line access, where is it verified that a newly started IBM Tivoli Netcool/lmpact Serverinstance is registering itself as a slave or primary in a cluster?

A. in the server.log fileB. in the netcool.log fileC. in the systemOut.log fileD. using the nci_server utility



QUESTION 14Which tool will start a policy from the command line?

A. nci_cryptB. nci_policy

C. nci_triggerD. nci_import



QUESTION 15What is true about the LDAP DSA?

A. It does not support data saved in UTF-8 format.B. It does not retrieve information from LDAPV2/V3.C. It allows IBM Tivoli Netcool/lmpactto add, modify, or delete information managed by the LDAP server.D. It does not allow IBM Tivoli Netcool/lmpactto add. modify, or delete information managed by the LDAP

server.



QUESTION 16What must occur before a data type can be defined?

A. Data Type service must be startedB. Policy Activator service is activatedC. Data Source definition is configuredD. ObjectServer Event Reader is activated



QUESTION 17What must be done to receive an IBM Tivoli Netcool/OMNIbus event when a policy run raises any unknownexception?

A. use the action function exceptionnameOand add policy code to insert the event between the bracketsB. use handle exceptionnameO in the policy and add policy code to insert the event between the bracketsC. create an ExceptionHandlerPolicy that inserts the event and define this in the Policytogger configurationD. configure the Self-Monitoring service to log exceptions into the ObjectServer defined in the service

configuration



QUESTION 18What is the minimum memory requirement for installing a Tivoli Integrated Portal profile and an IBM TivoliNetcool/lrnpact profile running on the same physical machine?

A. 2 GBB. 4 GBC. 6 GBD. 8 GB



QUESTION 19Which utility edits the installed GUI server deployment and maps the roles to the specified users?

A. roles.[bat|sh]B. user-roles.[bat|sh]C. update-impact-roles.[bat|sh]D. impact-security-roles.[bat|sh]



QUESTION 20Which functional step should be completed when designing an IBM Tivoli Netcool/lmpact V6.1 solution?

A. write an enrichment policyB. develop Netcool/lmpact startup scriptsC. test high availability and fail-over scenariosD. determine methods of achieving customer requirements



QUESTION 21The log function of the Impact Policy Language (IPL) provides a convenient mechanism for generatingmessages during the execution of a policy. These messages can be configured to indicate success or failure ofdata retrieval from a data type. Which statement describes where the output from the messages can be viewedby a user?

A. view the ObjectServer event list to find Self-Monitoring alerts

B. use the View Service Log button in the PolicyLogger windowC. use the View Data Type button in the data type configurationD. use the View Service Log button in the EventProcessor window



QUESTION 22The ncijrigger tool is executed with a user_name that has no password set. Which statement is true?

A. Use the command line with blank password.B. The NULL option needs to be used instead of a password.C. This is not possible because a user must always have a password set.D. The nci_crypt tool provides a dummy encrypted password that can be used instead.



QUESTION 23An e-mail will be used to trigger a policy using the e-mail reader service. Which two protocols are supported?(Choose two.)

A. ICQB. POPC. IMAPD. OutlookE. Outlook Express

Correct Answer: BCSection: (none)Explanation


QUESTION 24Which three options can be monitored by IBM Tivoli Netcool/lmpact V6.1 Self-Monitoring service? (Choosethree.)

A. Event FiltersB. Queue StatusC. Service FiltersD. Cluster StatusE. Version ControlF. Memory Status

Correct Answer: BDFSection: (none)Explanation


QUESTION 25What must be exactly the same on all members of an IBM Tivoli Netcool/lmpact cluster?

A. cluster nameB. GUI Server nameC. Impact Server nameD. GUI Server port number



QUESTION 26Which IBM Tivoli Netcool/lmpact Programming Language (PL) code block implements the pseudo- code?

INPUT: Events from OMNIBUS where Customer is NULL.

For each event, collect the data from external customerHost data type.

And populate the corresponding field.

"Pass Any Exam. Any Time." - www.actualtests.com 10 IBM C2010-573 ExamOUTPUT: Populate Customer

A. Option AB. Option BC. Option CD. Option D



QUESTION 27What is only configured on the primary portion of a data source definition?

A. the data source user nameB. the data source IP addressC. the data source port numberD. the data source server name



QUESTION 28How is the command line interface started?

A. ftp <hostname> <commandlineport>B. SSh <hostnanie> <commandlineport>C. telnet <hostname> <commandlineport>D. Rlogin <hostname> <commandlineport>



QUESTION 29What are two ways to verify the installed version of IBM Tivoli Netcool/lmpact V6.1? (Choose two.)

A. check the PolicyLogger LogfileB. use the command line utility nci_versionC. usethe nci_get_primary command line utilityD. use the IBM installer listlU.sh utility to retrieve the version numberE. log in to the Tivoli Integrated Portal of the Netcool/lmpact installation and use the Support tab

Correct Answer: DESection: (none)Explanation


QUESTION 30What must be started before starting the policy when executing a program with command line parameters andoutput parsed within a policy?

A. the nci_irexec serverB. the nci_trigger serviceC. the EmailReader serviceD. the PolicyLogger service



QUESTION 31What is the purpose of this IBM Tivoli Netcool/lrnpact V6.1 command?

UPDATE Service SET Running = false WHERE Name = `SelfMonitoring';

A. to start the Netcool/lrnpact ServerB. to stop the Self-Monitoring serviceC. to startthe Self-Monitoring serviceD. to verify that Netcool/lrnpact is running



QUESTION 32When using IBM Tivoli Netcool/lmpact V6.1 to insert a synthetic (or meta) event into Netcool/OMNIbus, whichfunction can be used?

A. NewEventB. MetaEventC. EventlnsertD. EventCreate



QUESTION 33What are three IBM Tivoli Netcool/lmpact V6.1 categories of data sources? (Choose three.)

A. JMSB. WSDIC. LDAPD. SOAPE. WAAPIF. Mediator

Correct Answer: ACFSection: (none)Explanation


QUESTION 34There are currently five policies defined within IBM Tivoli Netcool/lmpact V6.1 and Netcool/lmpact is being usedto launch one or more policies based upon Netcool/OMNIbus event processing requirements.

It is suspected that one of the policies that performs event enrichment is taking too much time.

Where can Profiling be enabled to potentially diagnose this problem?

A. in the Policy Logger serviceB. in the Policy Activator serviceC. in the OMNIbusEventReader serviceD. in the Netcool/OMNIbus ObjectServer

Correct Answer: ASection: (none)

Explanation


QUESTION 35A SQL data type contains items referred to as Field names. What is a key characteristic of the Field name?

A. It is only used as a source of documentation.B. It may contain characters, digits, and spaces.C. It can be set to any valid string that the user chooses.D. It must exactly match the column name in the corresponding table.



QUESTION 36What is the name of the IBM Tivoli Netcool/lmpact V6.1 installer for the UNIX installation?

A. setup.shB. install.shC. launchpad.shD. install-arcf.sh



QUESTION 37When using the Command Line Interface, what is the correct syntax for displaying the events waiting to beprocessed by the event processor?

A. Select Evt from Service where Name='EvtProcessor';B. Select Events from Service where Name='EventProcessor';C. Select WaitEvents from Service where Name = 'WaitEventProcessor';D. Select WaitingEvt from Service where Name='MaitingEventProcessor';



QUESTION 38IBM Tivoli Netcool/lmpact V6.1 is being used to perform Netcool/OMNlbus event enrichment. The data used toenrich the events is stored in three tables within a single IBM DB2 database. There are columns within the threetables that contain common values. Netcool/lmpact searches each one of the tables using the contents of aspecific column and then uses three columns from each table to enrich the Netcool/OMNlbus event records.

The requirement is for Netcool/lmpact to process up to 10 events per second. Netcool/lmpact has beensuccessfully enriching events at the required event rate.

It is recently noticed that new events in the Netcool/OMNlbus event list are slow to be enriched.What is the most likely indicator of this problem?

A. The Policy log file is empty.B. The Netcool/OMNlbus Event Reader service is no longer active.C. Queue Status events indicate increasing queue depth of events.D. Data Source Status events indicate a failed database connection.



QUESTION 39Which functional category or solution does this pseudo-code represent?

INPUT: events from OMNIbus where Contact-'

For each email address in Contact

Send email

OUTPUT: email(s) sent to contact(s)

A. Event CorrelationB. Event NotificationC. Event EnrichmentD. Event Suppression



QUESTION 40What must be determined when designing an IBM Tivoli Netcool/lmpact V6.1 solution?

A. if correct licenses are availableB. components necessary to achieve requirementsC. which custom scripts may influence the operational process flowD. if a support contract allows for efficient support in the event of problems during installation and operation



QUESTION 41Which two policy writing languages are supported in IBM Tivoli Netcool/lmpact V6.1? (Choose two.)

A. IPLB. C++C. HTMLD. PascalE. JavaScript

Correct Answer: AESection: (none)Explanation


QUESTION 42Which action is selected to receive the status events that the Self-Monitoring service inserts into theObjectServer in the OMNIbus Event Reader Mapping tab?

A. Get Event StatusB. Get Status EventsC. Get Event MappingD. Get Event Matching



QUESTION 43How many OMNIbus fields can be used in one IBM Tivoli Netcool/lmpact V6.1 policy?

A. up to 256 fieldsB. only the first 128 fieldsC. all fields available in Netcool/OMNIbusD. only the new fields defined in the policy



QUESTION 44Which service is capable of generating event containers out of ICQ messages?

A. EventReaderB. JabberServiceC. PolicyActivatorD. JabberActivator



QUESTION 45What can be used to execute an IBM Tivoli Netcool/lmpact V6.1 policy?

A. PolicyListenerB. PolicyExecuterC. DatabaseEventTriggerD. OMNIbusEventReader



QUESTION 46Which component(s) are required to launch a prepared operator view?

A. a WebserverB. the ncijrigger toolC. an Impact server instance, a GUI server instanceD. an OMNIbus ObjectServer, an Impact server instance, a GUI server instance




QUESTION 47What is a key requirement if an enrichment policy is planned?

A. Clustering must be configuredB. The external data must be indexedC. Read and write access to the external dataD. A relationship must exist between data that is to be enriched and external data

Correct Answer: DSection: (none)

Explanation


QUESTION 48Which command line is required on UNIX to export all data from a Netcool/lmpact Server named NCI to the /tmp directory?

A. ./nci_export NCI /tmp/NCI_exportB. ./nci_export -all NCI /tmp/NCI_exportC. ./nci_export -impactserver NCI /tmp/NCI_exportD. ./nci_export NCI -exportdirectory /tmp/NCI_export



QUESTION 49Which item is a valid IBM Tivoli Netcool/lmpact Programming Language (IPL) control structure?

A. forB. whileC. if-thenD. do-while



QUESTION 50Which service component is responsible for querying events from IBM Tivoli Netcool/OMNIbus?

A. PolicyLoggerB. EventProcessor ServiceC. OMNIbus EventReader ServiceD. ObjectServer Data Source Adapter



QUESTION 51Which option allows data to be retrieved, added, modified and deleted from the data source?

A. Database Type

B. Schema SelectedC. Back-end Database APID. Database User Permissions



QUESTION 52Which file contains the event processor properties?

A. ep.iniB. props.iniC. NCI_eventproc propertiesD. NCI_eventprocessor.props



QUESTION 53If an IBM Tivoli Netcool/lrnpact V6.1 policy requires a new OMNIbus ObjectServer field, which method can beused to create it?

A. the NCO ConductorB. the Tivoli Integrated PortalC. IBM Tivoli NetcoolWeb GUID. the OMNIbus Administrator application



QUESTION 54In which directory are the HTML files for the operator views stored?

A. $TIPHOME/opview/displaysB. $TIPHOME/operatotview/di splaysC. $IMPACT_HOME/opview/di splaysD. $IMPACT_HOME/operatorview/di splays


Explanation/Reference:

Explanation:

QUESTION 55Which service configuration option will cause an individual Impact service to start automatically when IBM TivoliNetcool/lmpactV6.1 starts?

A. Activate Service StartB. Enable Service StartupC. Synchronize Server Startup AutomaticallyD. Startup Automatically When Server Starts



QUESTION 56Which information is provided when the nci_trigger tool is executed with the -version option?

A. It causes the nci_trigger to print the syntax of the command and then exit.B. It causes the nci_trigger to print the nci_trigger tool version number, platform, and command syntax to

standard output and then exit.C. It causes the nci_trigger to print the Netcool/lmpact version number, platform, and command syntaxto

standard output and then exit.D. It causes the nci_trigger to print the version number of: Impact, Tivoli Integrated Portal,Name Server,

Deployment Engine and then exit.



QUESTION 57Which IBM Tivoli Netcool/lmpact V6.1 elements can be managed with projects?

A. FiltersB. Data TypesC. TransactionsD. Data Servers



QUESTION 58Where is error handling policy set?

A. PolicyLogger serviceB. EventProcessor service

C. CommandExecutionManager serviceD. In the corresponding service that launches the policy



QUESTION 59Which command starts the JRExec service?

A. nci_jrexecB. jrexec startC. start jrexecD. jrexec_service



QUESTION 60Which additional jar file is used by the Data Source Adapter when configuring the IBM WebSphere MQ clienton a separate machine from the MQ server?

A. dhbcore.jarB. fscontextjarC. providerutil jarD. com.ibm.mq.jmqijar



QUESTION 61What does the Web services listener listen for at an HTTP port?

A. PUT requestsB. JMS requestsC. GET requestsD. SOAP/XML messages



QUESTION 62What is recommended before the command line tool nci_import is used?

A. make a backup of the Name ServerB. clear the/tmp and $IMPACT_HOME/log directoriesC. in a clustered setup all secondary servers should be switched offD. the GUI server needs to be shut down and restarted after the import



QUESTION 63What is the correct order for assessing the policy development requirements?

A. Formulate a development planIdentify any other relationship, interactions, events, or policies Review the requirementsCreate the pseudo-code or flow chart

B. Identify any other relationships interactions, events, or policies Create the pseudo-code or flow chartFormulate a development planReview the requirements

C. Create the pseudo-code or flow chartFormulate a development planIdentify any other relationships, interactions, events, or policies Review the requirements

D. Review the requirementsFormulate a development planIdentify any other relationships, interactions, events, or policies Create the pseudo-code or flow chart



QUESTION 64In order for IBM Tivoli Netcool/lmpact to start using the ObjectSetver for authentication, the server must beconfigured so that it can map the roles that the application exposes to groups and/or users managed in IBMTivoli Netcool/OMNIbus. In which directory is the guiserver.setting file located?

A. $NCHOME/bin/usersB. $NCHOME/lib/omnibusC. $NCHOME/bin/tivoli/securityD. $NCHOME/etc/tivoli-vmm4ncos



QUESTION 65What determines how the Primary server is identified in an IBM Tivoli Netcool/lmpact cluster?

A. It is the first server that joins the cluster.B. The server name is configured as primary.C. It is the first server listed in the cluster_members.xrnl file.D. The server role (primary) is defined in the server.props file.



QUESTION 66Which post installation utility creates a new instance of the IBM Tivoli Netcool/lmpact Server or configuresName Servers?

A. nciB. nci_utilityC. nci_configD. nci_configuration_utility



QUESTION 67Which ports are assigned by default to IBM Tivoli Netcool/lmpactV6.1 (Impact profile)?

A. 8080, 9080, 9086B. 4100, 4200.4300,4400C. 9080-9086, 9088, 9090-9094D. 6310-16316, 16318, 16320-16324



QUESTION 68What are three ways to assess IBM Tivoli Netcool/lmpact performance issues? (Choose three.)

A. server logsB. reporting toolsC. Installer servicesD. Self-Monitoring serviceE. enrichment status tools

F. Response Logging services

Correct Answer: ABDSection: (none)Explanation


QUESTION 69There are currently five policies defined within IBM Tivoli Netcool/lmpact V6.1 and Netcool/lmpactis being usedto launch one or more policies based upon Netcool/OMNIbus event processing requirements.

Netcool/lmpact can collect the time required to execute any policy and this capability is enabled by activatingprofiling. Which service must be configured with profiling to collect this data?

A. PolicyLoggerB. SelfMonitoringC. PolicyActivatorD. OMNIbusEventReader



QUESTION 70What must be determined when designing an IBM Tivol Netcool/lmpactV6.1 solution?

A. customer involvementB. customer requirementsC. an optimization of event throughputD. an optimization of customer procedures



QUESTION 71Which predefined policy is included as part of the Event Isolation and Correlation solution?

A. EIC_IsolateB. EIC_CorrelateC. EIC_IsolateAndCorrelateD. Opview_IsolateAndCorrelate



Explanation:

QUESTION 72When using the Command Line Interface, what is the correct syntax for displaying the number of the eventprocessor threads?

A. Select ThreadsNumber from Service where Name= Èvents';B. Select NumThreads from Service where Name= Èvent Processor';C. Select Threads = true from Service where Name= ÈvtProcessor';D. Select Threads = false from Service where Name= Èvent Processor';



QUESTION 73A policy named POLICY_01 needs to be triggered at the Impact Server NCI using the nci_trigger tool. The useris tipadmin and the password is netcool. What is the correct command line?

A. nci_trigger NCI POLICY_01B. nci_trigger NCI tipadmin/netcool POLICY_01C. nci_trigger NCI tipadmin/gglwgggYepmZ POLICY_01D. nci_trigger -server NCI -user tipadmin -password netcool -policy POLICY_01



QUESTION 74Which two steps should be emphasized when gathering the technical deployment requirements from thestakeholders so that a full technical architecture is documented and approved? (Choose two.)

A. determine the sources of dataB. determine other external integration pointsC. verify the installation of an IBM Tivoli Netcool/OMNIbus ObjectServer instanceD. verify the hard disk space requirements on the IBM Tivoli Netcool/lmpact ServerE. verify that all the necessary operating system patches and packages are installed on the IBM Tivoli Netcool/

lmpact Server

Correct Answer: ABSection: (none)Explanation


QUESTION 75A policy is created that uses different data source types like Web services, LDAP, and a SQL data source, andit is unclear what issues the policy might run into later on during operation. What should be added to the policyto make sure that the policy reaches the end of the policy code?

A. configure the DefaultExceptionHandlerB. add an if statement to check if an ActionFunction returns an errorC. add a handle for all exceptions to the policy Handle Java.lang.Exception{}D. create another policy that monitors the log file of the first policy by JRExecAction and a shell script



QUESTION 76What is the purpose of the impactAdminUser role in IBM Tivoli Netcool/lmpact V6.1 (Netcool/lmpact)?

A. to unlock files locked by other users except for tipadminB. to have access to the full Netcool/lmpact menu navigationC. to modify and delete events on the Netcool/lmpact default ObjectServerD. to have access to the full Netcool/lmpact menu navigation except for the Operator View node



QUESTION 77What does the DefaultExceptionHandler policy do?

A. It creates an event in the ObjectServer.B. It logs the exception into the PolicyLogger log.C. It stops the corresponding EventReader service.D. It writes the EventContainer into the FailedEvent data type.



QUESTION 78What is the minimum access level to view and interact with the portlet, edit personal settings, edit globalsettings, and access portlet help?

A. UserB. EditorC. AdministratorD. Privileged User



QUESTION 79What is the correct command to check a policy syntax from the NCI server instance in the command linemanager?

A. nci_policy NCI syntax $NCHOME/impact/policy.ip1B. nci_policy NCI syntax #NCHOME/impact/policy/policy.ip1C. nci_policy server1 syntax $NCHOME/impact/policy/policy.ip1D. nci_policy -name NCI syntax $NCHOME/impact/policy/policy.ip1



QUESTION 80How is an IBM Tivoli Netcool/lmpact Server Instance created?

A. using the nci_server scriptB. using the nci_new_server utilityC. using the nci_configuration_utilitytoolD. using the WebSphere Administrative Console



QUESTION 81Which statement is true if a new Netcool/OMNIbus ObjectServer field will be created using IBM Tivoli Netcool/lmpact V6.1 (Netcool/lmpact)?

A. It can be done using the function: External Data Type Editor-New Field.B. It can be done using the function: External Data Source Editor-New Field.C. It cannot be done in Netcool/lmpact and must utilize one of the tools from Netcool/OMNIbus.D. It can only be done when the ObjectServer is created, before any event data is inserted into the

ObjectServer.



QUESTION 82What are three basic troubleshooting steps for IBM Tivoli Netcool/lmpact V6.1 Server? (Choose three.)

A. install product fixes

B. utilize reporting toolsC. run the syntax checkerD. uninstall Netcool/lmpactE. utilize Netcool/lmpact Server logsF. utilize logs and tools available on the host operating system

Correct Answer: BEFSection: (none)Explanation


QUESTION 83When using the Command Line Interface, what is the correct syntax for clearing the event processor servicequeue?

A. Update set Clear = true where Name= Èvents';B. Update Service set Clear = true where Name= Èvents';C. Update Service set Clear = false where Name = Èvent Processor';D. Update Service set ClearQueue = true where Name = Èvent Processor';



QUESTION 84Which two ObjectServer fields can be added to an event to prevent IBM Tivoli Netcool/lmpact V6.1 fromprocessing the same event twice? (Choose two.)

A. TimestampB. PolicyNameC. OperatorNameD. ReprocessFlagE. SuppressionFlag



QUESTION 85Which step is required to design an IBM Tivoli Netcool/lmpact V6.1 solution?

A. design a stakeholders project planB. determine which log level is requiredC. design IBM Tivoli Netcool/OMNIbus rules filesD. architect the solution with necessary components



QUESTION 86Which function is only performed by the primary server in an IBM Tivoli Netcool/lmpact cluster?

A. Event ReaderB. Policy LoggingC. Policy ActivatorD. Data Source Adapter



QUESTION 87A SQL data type contains items referred to as display names. What is a key characteristic of the display name?

A. It is only used as a source of documentation.B. It may contain characters, digits, and spaces.C. It can be set to any valid string that the user chooses.D. It must exactly match the column name in the corresponding table.



QUESTION 88An IBM Tivoli Netcool/lmpact V6.1 system is configured to connect to a specific IBM DB2 database utilizing ausemame of db2inst1 with a password of <password>. Which method should be used to verify that Netcool/lmpact has the required access to this IBM DB2 database?

A. verify that the PolicyLogger service is able to startB. verify that the PolicyActivator service is able to startC. use the Test Connectivity button in the IBM DB2 data sourceD. examine the policy log and look for connection successful messages



QUESTION 89IBM Tivoli Netcool/lmpact V6.1 is used for event enrichment on incomplete events in Netcool/OMNIbus. Which

planning step is required to design a solution?

A. Collect read and write permissions on the external data source.B. Collect information about the entire architecture and design a policy that can be used on event enrichment.C. Identify which external data can be used to enrich events in Netcool/OMNIbus and collect write permissions

on this data.D. Identify which external data sources have information that can be used to enhance Netcool/OMNIbus

events that are incomplete.



QUESTION 90IBM Tivoli Netcool/lmpact V6.1 is being used to perform Netcool/OMNlbus event enrichment. The data used toenrich the events is stored in three tables within a single IBM DB2 database. There are columns within the threetables that contain common values. Netcool/lmpact searches each one of the tables using the contents of aspecific column and then uses three columns from each table to enrich the Netcool/OMNlbus event records.The requirement is for Netcool/lmpact to process up to 10 events per second. Netcool/lmpact has beensuccessfully enriching events at the required event rate.

It is recently noticed that all new events in the Netcool/OMNlbus event list are not enriched. It is suspected thatthere are issues with the target IBM DB2 database. Which self-monitoring function should be enabled todiagnose the problem?

A. queue statusB. service statusC. memory statusD. data type status



QUESTION 91Which IBM Tivoli Netcool/lmpact V6.1 feature allows for logical grouping of policies and associated elements?

A. RolesB. GroupsC. ProjectsD. Operator Views



QUESTION 92

Which action is executed With the Command Select Polllnterval from Service where

Name = 'DefaultEmailReader'?

A. gets the poll intervalB. sets the poll intervalC. creates a filter for the EmailReaderD. selects the filter for the DefaultEmailReader



QUESTION 93Which data source can IBM Tivoli Netcool/lmpact V6.1 read but should be avoided due to performanceconcerns?

A. FlatfileB. InformixC. Oracle DBD. ITMWebService



QUESTION 94How is more detailed logging output for Policies obtained from an IBM Tivoli Netcool/lmpact Server?

A. open the PolicyLogger Service and enable Collect ReportsB. open the EventProcessor Service and set the Service Log to Write to FileC. open the PolicyLogger Service and enable: Append Thread Name to Log File Name, Append Policy Name

to Log File Name, and Service Log Write to FileD. open the PolicyLogger Service and enable: All SQL statements, Pre-execution Action Module Parameters,

Post-execution Action Module Parameters, and All Action Module Parameters



QUESTION 95Which command line is required on UNIX to import all data, which was previously exported to the rtmpdirectory, to an Impact server named NCI using the nci_import tool?

A. ./nci_import NCI /tmp/NCI_exportB. ./nci_import -all NCI /tmp/NCI_export

C. ./nci_import NCI -importdir /tmp/NCI_exportD. ./nci_import - impactserver NCI /tmp/NCI export



QUESTION 96When implementing an event enrichment solution in IBM Tivoli Netcool/lmpact V6.1, which adaptor is used toconnect to an external database?

A. Data LibraryB. Data SourceC. Data ProviderD. Data Connector



QUESTION 97Which item is a valid IBM Tivoli Netcool/lmpact Programming Language (PL) control structure?

A. ifB. forC. gotoD. case



QUESTION 98Which IBM Tivoli Netcool/lmpact V6.1 elements can be managed with projects?

A. LinksB. ServicesC. FunctionsD. Name Servers



QUESTION 99A Web service developer is trying to interface to IBM Tivoli Netcool/lmpact V6.1 and is having troubleconnecting to the Web services listener. Which two actions should be taken? (Choose two.)

A. check if a firewall is blocking accessB. check if the PolicyLogger service is up and runningC. check if the EventProcessor server is up and runningD. check if the Command Line Access service is runningE. check if the endpoint being used is correct using nci_findendpoint



QUESTION 100What are two Operator View types? (Choose two.)

A. BasicB. ActionC. InternalD. AdvancedE. Escalation

Correct Answer: ADSection: (none)Explanation


QUESTION 101What is recommended for a production installation of IBM Tivoli Netcool/lmpact V6.1?

A. There should be as many GUI Servers installed as Impact Servers.B. Each Impact Server should have a GUI Server installed on the same server.C. The GUI Server and the Impact Server should be installed on the same server.D. The GUI Server and the Impact Server should be installed on separate servers.



QUESTION 102Which tab is used to define a new data type within the Event Automation section of the GUI?

A. Data ViewB. Data TypeC. Data Model

D. Data Source



QUESTION 103Which function allows policies to execute external scripts/commands?

A. ActivateB. ReturnEventC. JRExecActionD. UpdateEventQueue



QUESTION 104Which role is required to log into the GUI and edit Operator Views?

A. impactSuperUserB. impactOpViewUserC. impactOperatorViewUserD. impactOpViewAdminUser



QUESTION 105If there is no opportunity to access the IBM Tivoli Netcool/lmpact V6.1 user interface, where is it verified if anImpact Server is up and running after startup?

A. netcool.logB. startWAS.outC. SystemOut.logD. NCI_policylogger.log



QUESTION 106

What is the purpose of an Electronic Service Request?

A. maintain Netcool/lmpact data sourcesB. collect Netcool/lmpact Operator View detailsC. recover Netcool/OMNIbus enrichment server eventsD. open, update, and report on problem management reports



QUESTION 107What is required before the command line tool nci_import can be used?

A. The EAR file needs to be redeployed.B. The target Netcool/lmpact Server needs to be running.C. The Netcool/lmpact Server needs to have logging enabled.D. A new project needs to be created into which the new content can be imported.



QUESTION 108How is it determined which policies are executed by which EventContainers?

A. EventReader restriction filterB. EventProcessor service log optionC. EventReader Polling Interval settingD. EventProcessor Maximum Number of Threads setting



QUESTION 109Which configuration item from the IBM Tivoli Netcool/lmpact Data Model is used within an OMNIbus EventReader configuration?

A. Data ItemB. Data TypeC. Data SourceD. Data Type Cache Settings

Correct Answer: CSection: (none)

Explanation


QUESTION 110What are three sources that can be managed by the event processor? (Choose three.)

A. HTML event listenerB. flat file event listenerC. XML message readerD. database event readerE. OMNIbus event readerF. OMNIbus event listener

Correct Answer: DEFSection: (none)Explanation


QUESTION 111Which three steps are needed to install the Web Service Client for IBM Tivoli Monitoring integrations? (Choosethree.)

A. run the installerB. extractthewsc.zipC. start the JRExec serverD. verify the JDK is availableE. modify the Situation ActionsF. start the OMNIbus event reader

Correct Answer: ABDSection: (none)Explanation


QUESTION 112The DSA XML data type mapping information is stored in which XML configuration file?

A. $IMPACT_HOME/dsa/binB. $IMPACT_HOME/dsa/XmlDsaC. $IMPACT_HOME/dsa/XmlinstallD. $IMPACT_HOME/dsa/Xmlconfig



QUESTION 113An IBM Tivoli Netcool/lmpact system must process a maximum of 30 ObjectServer events per second. Whatcan be used to verify that this requirement is being met?

A. enable Self-Monitoring and examine the resulting ObjectServer events for events/sec valuesB. examine events/sec messages by using the View Service Log feature of the PolicyLogger serviceC. examine events/sec messages by using the View Service Log feature of the EventProcessor serviceD. examine events/sec messages by using the View Service Log feature of the OMNIbus EventReader service



QUESTION 114When using IBM Tivoli Netcool/lmpact V6.1 to insert a synthetic (or meta) event into Netcool/OMNlbus, whichfunction can be used?

A. SendEventB. EventlnsertC. InsertEventD. ReturnEvent



QUESTION 115Which administration scripts allow the IBM Tivoli Netcool/lmpact Server to start and stop independently of theEmbedded WebSphere Application Server?

A. eWAS start and eWAS stopB. nci_server and nci_shutdownC. impact_start and impact_stopD. server start and server shutdown



QUESTION 116What is the output of the nci_export command?

A. a tar fileB. anxmlfileC. a directoryD. a comma delimited file



QUESTION 117Which two options are required to execute the ncijrigger tool? (Choose two.)

A. server_nameB. policy_nameC. project_nameD. encrypted user_idE. encrypted password

Correct Answer: ABSection: (none)Explanation


QUESTION 118What is the procedure to create a new data source?

A. System Configuration > New Data SourceB. System Configuration > New Data Model > New Data SourceC. System Configuration > Event Automation > Settings > New Data SourceD. System Configuration > Event Automation > Data Model > Data Model tab > New Data Source



QUESTION 119Which three instant messaging programs are supported by the IBM Tivoli Netcool/lmpact Jabber Service?(Choose three.)

A. IRCB. AIMC. XMLD. MSNE. XMPPF. Yahoo

Correct Answer: BDFSection: (none)Explanation


Explanation:

QUESTION 120Which command should be executed to collect log files for debugging issues?

A. $NCHOME/bin/nci_collect_logB. $NCHOME/bin/nci_collect_logsC. $NCHOME/impact/bin/ nci_collect_logD. $NCHOME/impact/bin/nci_collect_logs



QUESTION 121Which two options are supported using IBM Tivoli Netcool/lmpact Data Source Adapters? (Choose two.)

A. JMSB. data modelingC. XinY processingD. instant messagingE. Web services security



QUESTION 122How many data sources are used to create a policy that enriches IBM Tivoli Netcool/OMNIbus events from aremote Oracle database?

A. one data source for the remote Oracle data sourceB. two data sources: one for the ObjectServer and one for the remote Oracle database C three data sources

for the alerts.status table, alerts journal table and the alerts.details tableC. four data sources for OMNIbus, the alerts.status table and the remote Oracle database plus the table from

where the data is gathered



QUESTION 123The volume of events that the operators have to resolve must be reduced. All the events from six servicecenters funnel through one central ObjectServer. The ObjectServer does not have access to the servicelocation information, however the information is stored locally in an IBM DB2 database. The operators shouldonly see critical events from specific service center locations.

Which two key IBM Tivoli Netcool/lmpact V6.1 functional categories apply?

A. SchedulingB. Web ServicesC. Event NotificationD. Event EnrichmentE. Event Suppression




ibm certified deployment professional - tivoli … certified deployment professional - tivoli...

Documents