i year syllabus 2013-14.pdf

8/10/2019 I year syllabus 2013-14.pdf

1/40

1

Scheme of Study for I year B.Tech. / M.Tech. (5-Year Integrated) Programmesfor the students to be admitted from 2011-12 onwards

SEMESTER-ICommon to

BCE/BME/BMT/BCS/BIT/BCH/MST/MCM/MAM/MAU/MCH/BEE/BEC/BEI/BIC/BBT/BBE/BBI/MPS/MCS/MIC/MNN/MBI/MBT

Sl.No Code No Subject Period Per week Credit

L T P C

1CEN101/101R01/101R02

Strategies in Communication 2 1 -- 3

2CMA102/102R01

Engineering MathematicsI 3 1 -- 4

3CCS103/103R01

Programming in C 3 1 -- 4

4

CPY104/104R01

CCM104/104R01

Engineering Physics/

Engineering Chemistry4/4 -- -- 4/4

5

CCE105R01/

CCE105/105R01

Engineering Mechanics/

Engineering Drawing3/2 1/0 0/4 4/4

6

CCE106/106R01

CEE106/106R01

Basic Civil Engineering/

Electrical Sciences2/3 -- -- 2/3

7

CME107/

CCE107/107R01

Basic Mechanical Engineering/

Environmental Studies2/2 -- 0/1 2/3

8CCS108/108R01

Programming in C Lab -- -- 3 2

9

CPY109/

CCM109/

Engineering Physics Lab/

Engineering Chemistry Lab-- -- 3/3

2/2

10

CME110/

CCE110/

Engineering practice/

Computer Aided Drawing Lab-- -- 3/3 2/2

11CEN111/

Indian culture and ethics 1/0 -- -- 1/0

Total 20/19 4/3 9/14 30/31


2/40

SEMESTER-II

Sl.No Code No Subject Period Per week CreditL T P C

1CEN201/201R01

Technical Communication 2 1 -- 3

2CMA202/202R01

Engineering MathematicsII 3 1 -- 4

3CCS203/203R01

Programming in C++ 3 1 -- 4

4

CCM204/204R01

CPY204/204R01

Engineering Chemistry/

Engineering Physics4/4 -- -- 4/4

5

CCE205/205R01

CCE205/205R01

Engineering Drawing/

Engineering Mechanics

2/3 0/1 4/0 4/4

6

CEE206/206R01

CCE206/206R01

Electrical Sciences/

Basic Civil Engineering3/2 -- -- 3/2

7

CCE207/207R01/207R02

CME207

Environmental Studies/

Basic Mechanical Engineering2/2 -- 1/0 3/2

8CCS208/208R01

Programming in C++ Lab-- -- 3 2

9CCM209

CPY209

Engineering Chemistry Lab/

Engineering Physics Lab-- -- 3/3 2/2

10

CCE210

CME210

Computer Aided Drawing Lab/

Engineering Practice-- -- 3/3 2/2

11CEN211

Indian Culture and Ethics 0/1 -- -- 0/1

Total 19/20 3/4 14/9 31/30

2


3/40

3

CEN101/101R01/101R02STRATEGIES IN COMMUNICATION

L T P C2 1 - 3


4/40

4

OBJECTIVES

English I Strategies in Communication undertakes to introduce B.Tech.students to the general aspects of communication, with special emphasis on Scientific

discourse. In Unit I seven literary texts are introduced as communication models to beused for training students in LSRW skills through their active discussion, role play andpresentation. Unit II is concerned with speech practice in various interpersonalinteractions. Some basic rules to pronunciation are also introduced. Unit III deals withdeveloping reading skills through comprehension, note-making and summarizing.Unit IV concerns itself with writing at micro level -- various vocabulary and grammaticalfeatures of writing. Unit V aims at introducing students to discourse features andparagraph writing. At the end of the course, the learners will be able to use all the fourskills listening, speaking, reading and writing with confidence on various topics ofgeneral interest.

METHODOLOGYThere will be less and less of teacher talking and more and more of student

participation in terms of pair/small group/large group discussions and seminarpresentations.

EVALUATIONThere will be no questions on the theories of communication. Students will write

10 assignments and 3 tests at the formative stage. There will be a summativeexamination of 3 hours. The formative and summative tests will be so designed thatthey will help assess the learning outcome of the programme in terms ofstudent performance.

UNIT I: TEXTS1. Resolution and IndependenceWilliam Wordsworth2. The Turning Point of My LifeA.J. Cronin3. My Vision for IndiaA.P.J. Abdul Kalam4. Profession for WomenVirginia Woolf5. A Cup of TeaKatherine Mansfield6. Never, Never, NestCedric Mount7. RefundFritz Karinthy (Adapted by Percival Wilde)

(TO BE USED FOR TRAINING STUDENTS IN LSRW SKILLS THROUGHROLE PLAY, PRESENTATION etc.)


5/40

5

UNIT II: SPEECH PRACTICEA. Some basic rules to Spoken English

1. Introduction to Phonetic Symbols2. Pronunciation of Initial, Medial and Final /r/, /-ture/, and /-tion-sion-cion/3. Different ways in which f sound gets represented

4. Silent letters5. Word and sentence stress rules6. Punctuation as a guide to pause7. Intonation8. Accent Neutralization

B. Interpersonal Interaction1. Greeting2. Introductions3. Making requests4. Seeking permission, advice, suggestions5. Asking for information

6. Congratulating7. Apologizing8. Asking for and giving personal information9. Complaining without offending

(FOR INTERNAL ASSESSMENT ONLY)

UNIT III: READING1. Comprehension2. Note-making and summarizing

UNIT IV: WRITING: MICRO STRUCTURESpecial application of Vocabulary and Grammatical elements in Science and

Technology1. ConcordSubject -Verb; Noun - Pronoun2. Appropriate Verb Forms: aspects, questions and negatives, active-passive3. Use of Modal Auxiliaries4. Disambiguating words/phrases/sentences5. Tightening the rambling sentences with regard to simplicity, clarity and

precision6. IndianismsWords, Sentence patterns7. Analytical Reasoning and Language Use


6/40

6

UNIT V: WRITING: MACRO STRUCTURE1. Cohesion and Coherence

2. Discourse patterns/strategiesnarration, description, process writing,

enumeration, Classification, definition, comparison and contrast, cause

and effect, and argument

3. Paragraph Writing: Topic Sentence and its expansion

4. Essay Writing

Text Book: Strategies in CommunicationSASTRA Publication

Reference Books:

1. Bhatnagar, R.P. and Rajul Bhargava. 2008 (1989). English for CompetitiveExaminations. Chennai: Macmillan India Limited.

2. Gadasalli, Raj. 2004. Lets Speak American English. Bangalore: Vipra Center.

3. Mohan, Krishna and Meera Banerji. 2009 (1990). Developing CommunicationSkills. Chennai: Macmillan Publishers India Ltd.


7/40

7

CMA102/102R01ENGINEERING MATHEMATICS I(COMMON FOR ALL BRANCHES)

L T P C3 1 0 4

Course Objectives:1. To acquire skills in using Trigonometric functions in applications.2. To acquire mathematical skills in solving higher degree equations, locating

roots, transforming equations from one domain to the other.3. To appreciate mathematical construction of evolutes and envelopes in

engineering courses like Mechanics and Engineering Drawing.4. To understand how functions of several variables constitute engineering

optimisation.5. To comprehend the involvement of improper and multiple integrals in

engineering problems with notations and tables.6. To evaluate multiple integrals that occur frequently in engineering problems.

At the end of the course, students will be confident to apply variousmathematical concepts to engineering science.

UNIT I: Trigonometry 15 PERIODS

Expansions of sin nand cos n in powers of sin and cos Expansions

of sin n and cosn in terms of sines and cosines of multiples of Hyperbolic andInverse hyperbolic functions Logarithm of complex numbers separation of complex

functions into real and imaginary partssimple problems.

UNIT II : Theory of equations & Algebra 15 PERIODS

Theory of Equations : Introduction surds and irrational roots simple problems equations whose roots are in A.P,G.P and in H.P Relations between the roots andcoefficients Symmetric functions Formation of equations Decreasing andIncreasing the rootsTransformation of equationsReciprocal equationsDescartesrule of Signs.

Algebra: Binomial, Exponential and Logarithmic Series(without proof) Problems onsummation, coefficient and approximations.


8/40

8

UNIT III : Differential Calculus &Functions of several variables 15 PERIODS

Differential Calculus: The nth derivative of a function Leibnitz theorem Simple

problems. Curvature of a curve Radius of Curvature (Cartesian, Polar, Paramatricand Implicit form) Evolutes Involutes Envelopes(one parameter and twoparameter)Evolute as the envelope of normals.

Functions of several variables:Maxima and Minima of functions of twovariables(proofs of theorems are not included) Constrained Maxima and Minima Lagranges method ofmultipliers.

UNIT IV: Improper and Multiple Integrals 15 PERIODS

Improper Integrals : Concept of improper integrals with examples Definition of Betaand Gamma integrals Relation between them Properties of Beta and Gammaintegrals with proofs Evaluation of definite integrals in terms of Beta and GammaintegralsSimple applications(evaluation of double and triple integrals).Multiple Integrals: Double Integrals Evaluations Change of order of integration Triple integrals(problems involving Jacobians are not included)Simple applications .

Text Book:

1. Engineering Mathematics I, SASTRA University Publications, (RevisedEdition 2007)

Reference Books:

1. Engineering Mathematics for first year,T.VEERARAJAN,5TH

Edition, TataMcGraw Hill, 2006

2. Advanced Engineering Mathematics, Erwin Kreyszig, 8th

Edition, John Wileyand Sons(ASIA) Pvt limited 2003


9/40

9

CCS103/103R01

Programming in C

L T P C

3 1 0 4

Objective:

To understand the designs of programming

To develop the problem solving skills

To be able to develop a C Program for a given problem

Unit I 15 Periods

Introduction to Computer Problem Solving: Introduction-Problem solvingaspect, top down design, implementation of algorithms, program verification, efficiencyand analysis of algorithms. Designing Programs (Illustrations must be in Clanguage): Understanding the programs purpose, examples, body, and testing anddomain knowledge. Variables, Data Types, and Arithmetic Expressions: Workingwith Variables, Understanding Data Types and Constants, Working with ArithmeticExpressions. Program Looping: for Statement, while Statement, do Statement.Making Decisions: if Statement, switch Statement, Boolean Variables, ConditionalOperator. Applications: counting, summing a set of numbers, finding factorial, sinefunction computation, reversing the digits of an integer, base conversion, character tonumber conversion.

Unit II 15 Periods

Working with Arrays: Defining an Array, Initializing Arrays, Character Arrays,Multidimensional Arrays, Variable-Length Arrays. Working with Functions: Defining aFunction, Arguments and Local Variables, Returning Function Results, FunctionsCalling Functions, Functions and Arrays, Global Variables, Automatic and StaticVariables, Recursive Functions. Applications of Arrays and Functions: removal ofduplicates from an ordered array, partitioning an array, sorting by diminishing increment,binary search, keyword searching in a text, stack operation, computing the prime factorsof an integer.

Unit III 15 Periods

Working with Structures: A Structure for Storing the Date, Functions andStructures, Initializing Structures, Arrays of Structures, Structures ContainingStructures, Structures Containing Arrays, Structure Variants. Character Strings: Arraysof Characters, Variable-Length Character Strings, Escape Characters, More on


10/40

10

Constant Strings, Character Strings, Structures, and Arrays, Character Operations.Pointers: Defining a Pointer Variable, Using Pointers in Expressions, Working withPointers and Structures, The Keyword const and Pointers, Pointers and Functions,Pointers and Arrays, Operations on Pointers. Operations on Bits: Bit Operators, BitFields. The Preprocessor: The #define Statement, The #include Statement,

Conditional Compilation. More on Data Types: Enumerated Data Types, The typedefStatement, Data Type Conversions. Applications of structures, character stringsand pointers: Left and right justification of text, text line editing, linked list search,linked list insertion and deletion.

Unit IV 15 Periods

Working with Larger Programs: Dividing a Program into Multiple Files,Communication between Modules, Other Utilities for Working with Larger Programs.Input and Output Operations in C: Character I/O: getchar and putchar, FormattedI/O: printf and scanf, Input and Output Operations with Files, Special Functions for

Working with Files. Miscellaneous and Advanced Features: Miscellaneous LanguageStatements, Working with Unions, The Comma Operator, Type Qualifiers, Command-Line Arguments, and Dynamic Memory Allocation. Debugging Programs: Debuggingwith the Preprocessor, Debugging Programs with gdb. Application of file I/O: creationand processing of text and binary files with and without command line arguments.

Text Books:1. Stephen G. Kochan, Programming in C,Third Edition, CBS publishers and

distributors, 2001.

2. How to solve it by Computer, R. G. Dromey, Pearson Education, 2009.

3. Mathias Felleisen, Robert Bruce Findler, Matthew Flatt, Shriram Krishnamurthi ,

How toDesign Programs, PrenticeHall of India Pvt. Ltd., 2004.

Reference Books:1. Brian W. Kernighan and Dennis M. Ritchie, The C programming Language,

Second Edition, PrenticeHall, 1998 .

2. C Programming A Modern approach by K.N.King, W.W. Norton Company,

London, 2008.


11/40

11

CPY104/104R01/CPY204/204R01ENGINEERING PHYSICS

(COMMON FOR ALL BRANCHES)

L T P C

4 0 0 4

UNIT I: QUANTUM PHYSICS 15 PERIODSBreak Down of Classical Physics Plancks Quantum Theory Dual Nature ofRadiation Matter Wave : De Broglie Hypothesis Wave Packet De BroglieWavelength- Thomsons Experiment Uncertainty Principle The Wave Function Time Dependent and Independent Schrdinger EquationsProbability Interpretation ofthe Wave Function - Particle in One Dimensional Infinite Square Well QuantumMechanical Tunneling- Time Dependent Perturbation Theory.

UNIT II: SEMICONDUCTING AND NANO MATERIALS 15 PERIODS

Electrical and Thermal Conductivity of Metals - Types of Semiconductor - ChargeCarrier Density in Intrinsic Semiconductors Doping of Semiconductors CarrierDensities in Doped Semiconductors Fermi Dirac Formalism Conductivity ofSemiconductors Hall effect Experimental Determination of Carrier Concentrationand Mobility

Nanomaterials Synthesis, Properties, Energy Level 0D, 1D & 2D Materials SmartMaterials, Exhibiting Ferroelectric, Piezoelectric, Opto electric Behavior ShapeMemory Alloys Types, Structure, Temperature Induced Transformation, StressInduced Transformation, Functional Properties, Advantages, Disadvantages and

Applications

UNIT III: INTRODUCTION TO SPECTROSCOPY 15 PERIODSIntroduction to Absorption & Emission Spectroscopy: Nature of ElectromagneticRadiation Electromagnetic Spectrum Atomic Energy LevelsMolecular ElectronicEnergy LevelsVibrational Energy LevelsRaman EffectNuclear Spin BehaviourElectron Spin BehaviourX-Ray Energy Levels - Franck-Condon principle

UV & VIS Spectrophotometry, Instrumentation: Radiation Sources DetectorsMonochromatorsDouble-Beam Instruments.

Infrared Spectrophotometry: Correlation of IR Spectra with Molecular Structure DetectorsSample Handling. Raman SpectroscopyTheorySources & Detectors


12/40

12

UNIT IV: LASER AND MICROSCOPES 15 PERIODSBasic Principles of Laser action Conditions for Laser action Nd YAG , CO2,

Semiconductor laser Applications of Lasers in Medicine, Engineering ,Communication and Computer peripherals 3D profiling Holography 3D Images Recording and Reconstruction of Images(Quantitative treatment only).

Optical Microscope Metallurgical Microscope Electron Microscope ScanningElectron MicroscopeTransmission Electron MicroscopeAtomic Force MicroscopeScanning Tunneling Microscope

Text Books1. A.MarikaniEngineering Physics, PHI Learning Pvt Ltd., 2009.

2. G.Vijaykumari-Engineering physics, Vikas Publishing Pvt.Ltd.2nd Edition 2007.

Reference books1. S.I. Gupta, V . Kumar, R . C . Sharma, E l e m e n t s o f S p e c t r o s c o p y ,P r a g a t i

Prakashan 2007.

2. M. ArumugamEngineering Physics, Anuradha Agencies 3rd Edition 2008.

3. R.K.Gaur & S.L. Gupta Engineering Physics, Dhanpat Rai & Sons 8th

Edition2001.

4. B.B.Laud-Lasers and NonLinear Optics 2nd

Edition Wiley Eastern Limited

G. Aruldhass- Engineering Physics, PHI Learning Pvt Ltd. 2010.


13/40

13

CCE105R01 /CCE205/205R01

ENGINEERING MECHANICS

L T P C

3 1 - 4Unit I Equilibrium of Particles 15 Periods

Frames of reference- Force Systems Resolution and addition of forces, resultant ofseveral concurrent forces, Forces in 3D, Equations of equilibrium of particle in 2D and3D - Lames theorem.

Unit II Equilibrium of Rigid Bodies 15 Periods

Moment of a force about a point moments and couples - Varignons theorem -equivalent force systems-resultant of non-concurrent force systems parallel forces.

Equations of equilibrium of rigid bodies in 2D and 3D. Applications: Beams types ofsupports, loads and reactions. Concept of internal forces. Analysis of pin jointed trussesMethod of sections and joints.

Unit III Friction 15 Periods

Laws of frictionsimple contact friction - cone of frictionbelt frictionwedge frictionscrew jack.Properties of areas: Centroid of line, area and volume Composite areas hollowsections Center of gravity of regular solids conehemisphere. Second moment ofareas Parallel axis theorem perpendicular axis theorem. Method of integration forM.I of areas triangle, circle, semi circle, quadrant of a circle. Composite sections Tee section, I section, Z section.

Unit IV Dynamics of Particles 15 Periods

Displacement, velocity and acceleration and their relationship rectilinear andCurvilinear motion - rectangular components, Tangent and normal acceleration. Motionin a circular path. Newtons laws Applications. Work energy principle- impulse andmomentum principle. Applications.


14/40

14

Text Books1. Beer.F.P and Johnston.E.R, Vector Mechanics for EngineersStatics and

Dynamics, McGraw Hill International Book Company, 2002.

2. Rajasekaran.S and Sankarasubramanian.G, Fundamental of Engineering Mechanics,

Vikas Publishing House Pvt. Ltd., 2008.

Reference Books

1. Ferdinand.L.Singer, Engineering Mechanics (Statics and Dynamics), Harper RowPublishers.2007.

2. Meriam.J.L and Kraige.L.G, Engineering Mechanics (Statics and Dynamics), JohnWiley and Sons.2001.

3. Shames.I.H, Engineering Mechanics (Statics and Dynamics), PrenticeHall of India-New Delhi,2004.

4. Timoshenko.S.P and Young.D.H, Engineering Mechanics, McGraw Hill Book Co.Ltd.2003.


15/40

15

CCE106/106R01 / CCE206/206R01

BASIC CIVIL ENGINEERING

L T P C2 - - 2

UNIT I: Civil Engineering Materials 8 Periods

Branches of Civil Engineering Civil Engineering materials stones, Bricks, Steel,Cement, Concrete, Timber and plasticsdifferent types.

UNIT II: Surveying 7 periods

Surveying: Types, classification, measurement of distancesanglesdetermination ofareasLevellingSimple problemsTotal stationRemote Sensing,

UNIT III: Building components 8 Periods

Foundations Bearing capacity Requirement of good foundations Types, Stonemasonry. Brick MasonryBeams, columns, Lintels, roofingFlooringDifferent typesonlyInterior designlandscaping.

UNIT IV: Mechanics and structures 7 periods

Mechanics: Forces, stress, strain, Elasticitysimple problemsBridges, dams, roadsdifferent typesRailways-permanent way -components. .

Text Book:

1. M.S. Palanichamy, C. Shanmugham, Basic Civil Engineering and BasicMechanical Engineering, Tata McGrawHill Publishing Company Ltd., 2000.

Reference Books

1. Natarajan. K.V, Basic Civil Engg., Dhanalakshmi Publications, Chennai,2005

2. Ramamrutham, Basic Civil Engineering, Dhanpat Rai Publishing Company

(P),Ltd., 1999.

3. Satheesh Gopi,Basic Civil Engineering Pearson Publications,2010.


16/40

16

CME107/ /CME207

BASIC MECHANICAL ENGINEERING

L T P C

2 0 0 2


17/40

17

UNIT I: Energy Resources and Power Plants 17 Periods

Conventional and non-conventional energy resources applications Power

plants steam, hydel, nuclear, gas turbine, combined cycles. Steam Boilers -

modern high pressure boilers. Steam turbines - types operating principle.

Refrigeration and Air-conditioning principles of operation of refrigerator and

air- conditioner.

I.C. Engines-typesworking principles of 2-stroke and 4-stroke enginesfuel

injection systemsignition systemscooling and lubrication systems.

UNIT II: Manufacturing Technology 13

Periods Machining Operations in lathe, drilling and shaping, introduction to CNC

machining. Formingprinciples of forgingrollingextrusionsheet metal forming

drawing. Foundry Process pattern making - casting. Welding principles

types.

Text Book:

1.K. Venugopal and V. Prabu Raja, Basic Mechanical Engineering,

AnuradhaPublications, 2007.

Reference Books

1. T.J.Prabhu, V.Jaiganesh and S. Jebaraj, Basic Mechanical

Engineering,SCITECH Publications Ltd., 2001.

2. R,K.Rajput, Thermal Engineering, Lakshmi publishers, 2010

3. S.K.Hajra Chowdri, Elements of Workshop Technology Vol.I&II, Asia Publishing

House


18/40

18

CCS108/

Programming in C Lab

1. Programs using Input, output and assignment statements

2. Programs using Branching statements

3. Programs using Looping statements

4. Programs using Functions

5. Programs using Arrays

6. Programs using Structures

7. Programs using strings

L T P C

0 0 3 2

8. Programs using Pointers (both data pointers and function pointers)

9. Programs using dynamic memory allocation

10. Programs using Recursion

11. Programs using Files

12. Dividing a large program into multiple files


19/40

19

CPY109/ /CPY209

ENGINEERING PHYSICS LAB(Common for I year students)

L T P C0 0 3 2

List of Experiments(Any 12 experiments)

1. Four probe methodMeasurement of Resistivity of material.

2. Hall effectMeasurement of carrier concentration and mobility of

semiconductor.

3. Measurement of dielectric constant of material using parallel plate capacitor.

4. Logic gates AND, OR, NOT, NAND and NOR construction and truth table

verification using discrete components.

5. SpectrometerDetermination of wavelength by using diffraction grating

6. Newtons Rings Method - Radius of Curvature of the Lens.

7. Lees Disc method Determination of Thermal Conductivity of the Bad

Conductor.

8. Transistor Characteristics - Common Emitter Configuration.

9. Optical Fibers - Measurement of Numerical Aperture and Attenuation.

10. Calibration of Ammeter using Potentiometer.

11. Laser Grating - Determination of wavelength of He-Ne Laser.

12. Non-Destructive Testing (Demo).

13. Thermistor - Variation of Resistance with Temperature and find the Energy gap.

14. Ultrasonic InterferometerDetermination of velocity of Ultrasonic waves in

liquids and Compressibility of Liquids.


20/40

20

CME110/ / CME210/

ENGINEERINGPRACTICE

L T P C0 0 3 2

List of Exercises

1. Angle Fitting by filing of Steel flats

2. Fabrication of a Tray from G. I sheet

3. Forging of round rod to square Rod

4. Welding of Lap and Butt joints

5. Preparation of Mould cavity

6. (a) Dismantling, study and assembly of I.C. Engines

(b) Dismantling, study and assembly automobile gearbox

7. Study of power distribution and domestic electric appliances

(a) Power distribution setup

(b) Measure of insulation using megger

(c) Efficiency of electric kettle

8. Study of domestic wiring

(a) Staircase wiring(b) Fluorescent lamp wiring(c) Ceiling fan wiring

9. Design of regulated power supply and demonstration of its working


21/40

21

10. (a) Measurement of passive components R, L & C using bridges

(b) Measurement of amplitude, frequency and phase angle ofstandard waveforms using Cathode Ray Oscilloscope (CRO)

11. Study & Testing of PC Hardware

12. Setting various bonds using bricks

13. Pipe fittings and fixtures in field


22/40

21

CEN111/ CEN211/

INDIAN CULTURE & ETHICS

L T P C1 0 0 1

Our Cultural HeritageDharma: Ethical Values- Truth- Non-violence.ServiceSacrifice - LoveUniversal BrotherhoodHonesty- Work Ethics- DutyToleranceSwadharma- SelfknowledgeSelf improvement.The individual and SocietyThe Beautiful and the GoodReligion: NeedUniversalityinter- religious understanding

Scientific Humanism

Reference Books:

1. Radhakrishnan. S - Indian Religion (Orient Paper Backs).

2. Jawaharlal NehruThe Discovery of India : Chapters 3&4(OUP)

3. David Frawley- Hinduism; The Eternal Tradition; Chapter 1.6 (Voice of India, NewDelhi)


23/40

22

CEN201/201R01

TECHNICAL COMMUNICATION

OBJECTIVES

L T P C

2 1 0 3

English II: Technical Communication focuses on developing proficiency ofB.Tech. students in communication skills specific to their studies and likely demand intheir workplace thereafter. Unit I introduces communication models where certainsignificant features like Courtesy, Body Language, Cultural differences can be gainedindirectly by their participation in discussion, role play and presentation. Unit IIintroduces them to the full import of technical communication, Unit III to the specialfeatures of listening. Unit IV exposes the learner to the intricacies of speaking and UnitV to the special features of technical writing.

At the end of the course learners will be able to use English for all purposes oftechnical communication make effective interpersonal interactions, make effectivepresentations and write various types of reports in appropriate format.

METHODOLOGYTeachers will be guides on the sides, than sages on the stage. Students will

learn the intricacies of technical communication through their active participation inpair/small group/large group discussions and seminar presentations.

EVALUATIONThere will be no questions on theory. Students will do 10 assignments and three

tests at the formative stage and one comprehensive summative examination of 3 hoursat the end of the course. The formative and summative tests are designed to assess theoutcome of the programme in terms of student performance.

Unit I: TEXTS1. On Saying PleaseA.G. Gardiner

2. Mr. Know AllSomerset Maugham

3. Notes on English CharacterE.M. Forster

4. ScienceDestroyer or CreatorJ. Bronowski

5. The Technological EngineAlvin Toffler

6. Dear DepartedStanley Houghton

7. Hour of TruthPercival Wilde

Unit II: Nature of Technical Communication1. Definition, importance and process2. 6c s of Communication


24/40

23

3. Maslows hierarchy of needs, The you attitude,Use of positive language,Confidence versus Sarcasm

4. Importance of Technical Communication5. General and Technical Communication6. Process of Communication

7. Levels of Communication Interpersonal/Organizational/Mass8. Flow of CommunicationDownward/Upward/Horizontal

Unit III: Listening Comprehension (For internal assessment only)1. Listening Process2. Barriers to Listening3. Types of Listening4. Characteristics of a good listener5. Listening and Note-taking6. Training in Listening

Unit IV: Professional Speaking (For internal assessment only)1. Audience Analysis2. Organizing a speech3. Delivering a speech: Presentation Strategies4. Interview Techniques5. Group Discussion

Unit V: Professional Writing1. Trans-coding -- from verbal to visual & from visual to verbal2. Editing, Proof reading, Referencing3. Proposals

4. User manual and Product description5. Reportsfeasibility, market survey, project6. Conference paper/journal article writing in IEEE Format7. Memos and E-mails8. Advertisement Writing


25/40

24

Text BookTechnical Communication. SASTRA Publication.

Reference Books:

i. Gerson, Sharon J and Steven M. Gerson. 2007. Technical Writing:

Process and Product. Delhi: Pearson Prentice Hall.

ii. Raman, Meenakshi and Sangeetha Sharma. 2004. Technical

Communication: Principles and Practice. New Delhi: OUP.

iii. Rizvi, Ashraf. 2006. Effective Technical Communication. New Delhi:

Tata Mc Graw Hill Publication Company Ltd.


26/40

25

CMA202/202R01

ENGINEERING MATHEMATICS II(COMMON FOR ALL BRANCHES)

L T P C

3 1 0 4


27/40

26

Course Objectives:

1.To recognize differential equations arising from science / engineering problems

and develop methods to solve it.2.To represent data in matrix form ; to interpret eigen values of matrices physically andgeometrically ; to program various matrix operations.3.Computations of various Vector Calculusoperations

- To physically interpret vector operators and to solve problems.- To evaluate multiple integrals that occur frequently in physical

and engineering problems.4.To interpret Mathematically various three-dimensional surfaces by equations whichforms the basis for Computer Graphics.

At the end of the course, students will have skills in mathematically

modeling practical problems and solving them.

UNIT I- Ordinary Differential Equations 15PERIODS

First order first degree ODEs - Bernoullis Differential equation ExactODEs- First order higher degree ODEs - solvable for p,x,y Clairauts form

Application in Electrical circuits current inductive circuits capacitance circuits orthogonal trajectoriessolving second and higher order ordinary differential equationswith constant coefficientsparticular integrals of various functions Eulers differentialequations with variable coefficients simultaneous differential equations with constant

coefficientsmethod of variation of parameters .

UNIT II- Matrix Algebra 15PERIODS

Introduction Inverse of a matrix by elementary transformation Linearindependence and dependence of vectors- Eigen values and Eigen vectors propertiesof Eigen values and Eigen vectors with proofs Cayley Hamilton theorem(withoutproof)

Finding higher powers and Inverse of the matrix by using Cayley Hamilton theorem Similarity transformation Diagonalisation of a matrix by similarity transformation

Orthogonal matrix Diagonalisation of a matrix by orthogonal reduction QuadraticFormsNature of Quadratic formsreduction of Quadratic form to Canonical form.


28/40

27

UNIT III - VECTOR CALCULUS 15 PERIODS

Vector differentiation - Gradient , Divergence and CurlGeometrical andPhysical Interpretation(without proof)Irrotational and Solenoidal vector fieldsvectoroperator identities without proofVector integration definitionsimple problems online, surface and volume integralsGreens theorem ,Stokestheorem and Gauss

Divergence theorem (without proof)verifications and applications.

UNIT IV - ANALYTICAL GEOMETRY OF THREE DIMENSIONS 15 PERIODS

The Plane Angle between the planes The Straight Line Symmetricalform of the equations of a Line Transformation of the equations of a line fromunsymmetrical form to the symmetrical formCoplanar LinesSkew LinesShortestdistance between two linesThe SphereEquation of tangent plane to a Sphere at agiven point on itOrthogonal Spheres.

Text Book:

Engineering Mathematics II SASTRA University Publications, (Revised Edition 2007)

Reference Books:

1. Engineering Mathematics Volume II, M.K.Venkataraman,National publishingCompany ,India 2001.

2. Engineering Mathematics for first year, T.VEERARAJAN,5TH Edition, Tata McGrawHill, 2006

3. Engineering Mathematics Volume III, P.Kandasamy and others, S.Chand, 2006.4.. Advanced Engineering Mathematics, Erwin Kreyszig, 8th Edition, John Wiley and

Sons(ASIA) pvt limited 20035. Advanced Calculus , Volume I, S. Arumugam, A.Thangapandi Issac, New

Gamma Publishing House,20076. Algebra, Narayanan ,T.K.Manicavachagom Pillai, Ganapathy, S.V. Publishers, 2005


29/40

28

CCS203/203R01

PROGRAMMING IN C++

L T P C3 1 0 4

Objective: To Understand the concepts of OOP

To apply OOP in solving problems

To develop a C++ program for a given problem.

Unit I 15 Periods

Introduction: Fundamentals of object oriented programming procedure oriented

programming Vs. object oriented programming (OOP), Object oriented programmingconcepts Classes, reusability, encapsulation, inheritance, polymorphism, dynamicbinding, message passing. C++ Programming Basics: Output Using cout,directives, input with cin, type bool, setw Manipulator,type Conversions. Functions:returning values from functions, reference arguments, overloaded function, inlinefunction, default arguments, returning by reference.

Unit II 15 Periods

Object And Classes: Implementation of Class in C++, C++ Objects As Physical Object,C++ Object As Data Types, Constructor, Object As Function Arguments, the

Default Copy Constructor, returning Object From Function, Structures And Classes,Classes Objects And Memory Static Class Data, Const Data and Classes. Arrays andString Arrays Fundamentals:Arrays as Class Member Data, Arrays Of Object, String,the standard C++ String Class. Operator Overloading: Overloading Unary Operators,Overloading of Binary Operators, Data Conversion, Pitfalls of Operators Overloading

And Conversion, Keywords Explicit And Mutable.

Unit III 15 Periods

Inheritance: Concept of Inheritance, Derived Class And Base Class, DerivedClass Constructors, Overriding Member Function, Inheritance In The English Distance

Class, Class Hierarchies, Inheritance And Graphics Shapes, Public And PrivateInheritance, Levels Of Inheritance, Multiple Inheritance, Ambiguity In MultiplyInheritance, Aggregation: Classes Within Classes, Inheritance And programDevelopment. Pointers: Addresses and pointer, The Address-Of Operator &, Pointerand Arrays, Pointer and Fraction, Pointer And C- Types String. Memory Management:New And Delete, Pointers to Objects, Debugging pointers. Virtual Function: Virtual


30/40

29

Function, Friend Function, Static Function, Assignment And Copy Initialization,This Pointer, Dynamic Type Information.

Unit IV 15 Periods

Streams and Files: Streams Classes, Stream Errors. Disk File I/O with Streams, FilePointers, Error Handling in File I/O, File I/O With Member Function, Overloading theExtraction And Insertion Operators, Memory As A Stream Object, Command line

Arguments, and Printer Out put. Templates and Exceptions: Function Templates,Class Templates Exceptions. Multi file Programming: Reasons for multi-fileprogramming, creating multi-file program, A very long number class, A high rise elevatorsimulation

Text Book

1. Robert Lafore, Object oriented programming in C++ (Third Edition), Galgotia

publishers private limited, New Delhi, 2009.

Reference Books1. Mastering C++ by KR Venugopal and Rajkumar, T Ravishankar; Tata McGraw

Hill Publishing Co. Ltd., New Delhi, 1997.

2. C++: An introduction to programming by Jense Liberty, Tim Keogh: BPB

Publications, New Delhi,2001.

3. C++ Primier by Stephen Parata , TMH Publishing Co. Ltd., New Delhi,2000.


31/40

30

CCM104/104R01/CCM204/204R01ENGINEERING CHEMISTRY

L T P C

4 0 0 4

UNIT I: 15 Periods

WATER TREATMENT: Hardness of water, Complexometric determination of hardness

of water EDTA method, Problems on hardness calculation; Specifications for boiler

feed water, Boiler problems Scales and sludges, Boiler corrosion, Caustic

embrittlement, Priming & foaming; Various internal treatment procedures of boiler water;

External treatment methods LimeSoda process, Zeolite process, Ion exchange

process; Specifications for drinking water, Treatment of water for domestic use;

Desalination of brackish water Electro dialysis, Reverse osmosis; Waste water

treatment Aeration, Trickling filter, Activated sludge process.

UNIT II: 15 Periods

HIGH POLYMERS: Monomers and their functionality, Nomenclature of polymers,

Classification of polymers; Types of polymerization Chain (addition) and step-growth

(condensation) polymerization; Plastics, Compounding of plastics; Fabrication

techniques Compression, injection and transfer molding; Preparation and uses ofsome thermoplastic (Rosin. Shellac, Cellulose derivates, Vinyl resins, Polyamides

Nylons and Kevlar) and thermosetting (Phenoplasts, Amino resins, Polyester resins,

Alkyd resins, Epoxy resins, Polyurethanes, Silicones) resins; Structure property

relationship in polymers- Physical state- Chemical resistance and strength of polymers;

Foamed, Reinforced and Conducting polymers.

UNIT III: 12 Periods

CORROSION & CORROSION CONTROL: Electrode potentials and Electrochemical

series, Galvanic cells and Electrolytic cells, Chemical and Electrochemical corrosion,

Factors influencing corrosion, Mechanism of rusting of iron in acid neutral and alkaline

environments, Differential metal corrosion, Differential aeration, Atmospheric and soil

corrosion. Anodic and cathodic protection, Electroplating, Electroless plating,


32/40

31

Anodization, Corrosion inhibitors, Importance of selection of materials and design of

structural patterns in corrosion control.

UNIT IV 18 Periods

ENGINEERING MATERIALS: Superconductors Superconductivity and temperature,Types of superconductors, Superconducting cuprates, Applications of superconductors

(superconducting magnets, catalysis, gas sensors, electronic components); Lubricants

Role of a lubricant, Classification of lubricants (Synthetic lubricants, Liquid lubricants,

Semi-solid and Solid lubricants), Viscosity index, Cloud point, Pour point, Flash point;

Anti-stiction agents for Micro Electromechanical Systems (MEMS); Plating on plastics

for printed circuit boards.

NANOMATERIALS: Definition of nanomaterials, Surface-to-Volume ratio, Types of

nanomaterials (metal, semiconductor, polymer nanomaterials; quantum dots, nano films

and nanowires), Size and shape - dependent optical, electrical, thermal and mechanical

properties; Applications of nanomaterials (examples in health care, electronics and

textile industry).

Textbook:

1. R.Gopalan, D.Venkappayya and Sulochana Nagarajan, A Textbook of Engineering

Chemistry,Vikas Publishing House, New Delhi, 3

rd

edition (2006)

Reference Books:

1. J.C. Kuriacose and J. Rajaraman, Chemistry in Engineering & Technology,Vol I &

II. Tata McGraw Hill Publishing Company, New Delhi (1984)

2. Mark Ratner & Daniel Ratner, NanotechnologyA Gentle Introduction to the Next

Big Idea, Pearson Education(Low price Edition) (2005)


33/40

32

CCE105/105R01/CCE205/205R01

ENGINEERING DRAWING

L T P C

2 0 4 4

Unit I: Basics of Engineering drawing and Curves 15 Periods

Importance of drawing in engineering applications Use of drafting instruments BISspecifications lettering and dimensioning Geometric construction Conic sections:ellipse, parabola and hyperbola. Cycloids-epicycloids and hypocycloid. Involutes-triangle, square and circle.

UnitII: Projection of points, lines and Solids 15 Periods

General principles of orthographic projections First angle projection projection ofpoints located in all quadrantsprojection of straight lines located in the first quadrant:determination of true lengths and true inclinations Projections of Solids-prisms,

pyramids, cylinders and cones (Truncated solids not included) change of positionmethod and change of reference line method.

UnitIII: Section of solids and Development of lateral surfaces 15 Periods

Section of solids- true shape of sections development of lateral surfaces of solids-prisms, pyramids, cylinders and cones.

UnitIV: Isometric projection and building drawing 15 Periods

Principles of Isometric projectionIsometric projections of simple and truncated solids,

prisms, cylinders and cones. Introduction to building drawing: simple problem onresidential buildings (up to three rooms).

Text Books

1. K.Venugopal, Engineering Drawing, New Age International (P)Limited, 2010

2. K.V.Natarajan, Atext book of Engineering Drawing Graphics, DhanalakshmiPublishers, Chennai, 2008.

Reference Books

1. K.R.Gopalakrishna, Engineering Drawing,(Vol I& II) Subas Publications,2008

2. N.D.Bhatt, Engineering Drawing,Charotar Publishing house, 2003

3. Dhananjay AJolhe, Engineering Graphics, McGRaw-Hill Publishing Company, Ltd,2009.


34/40

33

CEE106/106R01 /CEE206/206R01

ELECTRICAL SCIENCES

L T P C

3 0 0 3

UNIT I: 15 PERIODS

DC circuits: Definition and units of voltage, current, potential difference, power, energy,resistance, conductance, resistivity- Ohms law-Kirchhoffs law- series circuits-parallelcircuits-series parallel circuits-simple problems on Ohms law and series parallelcircuits- Mesh and Nodal analysis-simple problems.AC fundamentals: Concepts of ac-Definition of terms, cycle, frequency, time period,amplitude, instantaneous value, average value, rms value, maximum value, form factorand peak factor.

Magnetic circuitsDefinition of magneto motive force (m.m.f), flux and reluctance-analysis of simple series(compound) magnetic circuits-problems. Leakage coefficient- comparison betweenelectric and magnetic circuits. Faradays law of electromagnetic induction-Lenzs law-statically and dynamically induced e.m.f-self and mutually inductances-energy stored inthe magnetic field of an inductor-force on a current carrying element in a magnetic field-Fleming right and left hand rules-simple problems.

UNIT II: 10 PERIODS

Basic Electronic Devices: Semi conductor P-N junction diode- working principle-V-I

characteristics, zener diode -zener breakdown-V-I characteristics, Bipolar junctiontransistor- Modes of operation-input, output characteristics, Junction Field Effecttransistor- working principle- drain and transfer characteristics, Special diodes- varactordiode, Photo diode, Sckotty diode, tunnel diode

UNIT III: 10 PERIODS

Unit and systems- Basic Need for measurement of physical quantities, units formeasurement, systems of units-SI: fundamental and derived units.Measurement of Parameters: Different methods of measuring low, medium and highresistances, measurement of inductance & capacitance with the help of AC Bridges, Q

Meter.Cathode Ray Oscilloscope: Basic CRO circuit (Block Diagram), Cathode ray tube(CRT) & its components , application of CRO in measurement , Measurement of phasedifference and frequency of a sinusoidal ac voltage, Lissajous Pattern, Dual Trace &Dual Beam Oscilloscopes.


35/40

34

UNIT IV: 10 PERIODS

Communication: Signals- analog and digital, need for modulation-amplitudemodulation, Frequency modulation-Phase modulation - pulse modulation techniques-Digital modulation- ASK, FSK, PSK MODEM

(Block diagram approach):Radio, TV, Picture tube- television camera and scanning- TVsignal transmission- micro wave system- satellite communication - fibre opticcommunication- ISDN

Reference Books:

1. B.L.Theraja, Fundamentals of Electrical and Electronics Engineering, S.Chand &

Co., New Delhi, 1997

2. K.A.Muraleedharan & R.Muthusubramanian, Basic Electrical, Electronics and

computer engineering, Tata McGraw-Hill 1997.

3. W.D.Cooper and A.D.Helfrick, Electronic Instrumentation and measurement

techniques, - Third edition, Prentice Hall of India, 1991.

4. A.K.Sawhney, A course in Electrical and Electronic measurements and

Instruments, Dhanpat Rai & Sons , 17th

Edition, 2000.

5. G. Kennedy, Electronic Communication Systems, McGraw Hill, 1984.

6. Anokh Singh, A K Chhabra, Principles of communication Engineering, S. Chand

Publications, 3 rd Rev.edition. 1991.

7. R.S.Sedha Text book of applied electronics, Chand & Co.Ltd.,1987


36/40

35

CCE107/107R01 /CCE207/207R01/207R02ENVIRONMENTAL STUDIES

L T P C

2 0 1 3

UNIT I : Natural Resources 8 Periods

Renewable and non-renewable resourcesAssociated problemsForest Resourcesmineral resourceswater resources - Food resources - Energy resources(Renewableand non-renewable) - Land resources - Role of intellectuals in conservation of naturalresources .

UNIT II :Eco-systems 8 Periods

Concept of an ecosystem - Structure of ecosystems Elements in living and non-livingsystems Energy laws, biotic structure Bio diversity & importance Conservation of

Bio diversity - Categories of organisms, feeding and non-feeding relationship Nutrient cycles.

UNIT III: Pollution 7 Periods

Air pollution and their impact primary and secondary pollutants control strategiesIndoor pollutantsglobal warmingInternational Treaties.

UNIT IV :Human Population and the Environment 7 Periods

Population growth, variation among nations - Women and Child Welfare GlobalAtmospheric changes - Public awareness.

Field Work: Visit to a local area to document environmental assets river / forest /grassland / hill / mountain - Visit to a local polluted site Urban / Rural / Industrial /

Agricultural - Study of common plants, insects, birds - Study of simple ecosystems pond, river, hill slopes, etc.


37/40

36

Text Books

1. A Hand Book of Environmental Studies UG Course MaterialCompiled by Faculty ofSchool of Civil Engineering, SASTRA University, 2004.

2. Bharucha Erach (Ed), Text Book for Environmental Studies, UGC, New Delhi, 2004.

3. P.D. Sharma, Ecology and Environment, Rastogi Publications, New Delhi, 2009.

4. Anubha Kaushik &: C.P Kaushik Environmental Science and Engg by, New AgeInternational Pvt. Ltd. 2008.

.Reference Books:

1. Anjaneyulu Y, Introduction to Environmental Science, BS Publications, Hyderabad,2004.

2. Bharucha Erach, Textbook of Environmental Studies for Undergraduate Courses,

University Press, 20093. Daniel B, Botkin et.al, Environmental Science, John Wiley & Sons, 2000.

4. Meenakshi. P, Elements of Environmental Science and Engineering, PrenticeHallof India, New Delhi, 2006.

5. William P,Cunnigham et.al, Principles of Environmental Science, Tata McGraw HillEdition, 2002.


38/40

37

CCS208/208R01

Programming in C++ Lab

L T P C0 0 3 2

1. Programs using branching

2. Programs using multidimensional arrays

3. Programs using function overloading, inline functions

4. Programs using classes and objects (array as data members, array objects)

5. Programs using constructors and destructors

6. Programs using String class

7. Programs using operator overloading

8. Programs for data conversion using overloading

9. Programs using inheritance

10. Programs using virtual functions, friend functions

11. Programs using templates

12. Programs using files

13. Dividing a large program into multiple files


39/40

38

CCM109/ /CCM209/ENGINEERING CHEMISTRY LAB

LIST OF EXPERIMENTS L T P C

0 0 3 2

1. Determination of total hardness of water by EDTA method.

2. Estimation of Chemical Oxygen Demand (COD) in wastewater.

3. Estimation of sodium and calcium ions in water by flame photometry.

4. Estimation of iron (II) using diphenylamine indicator (DichrometryInternal indicator

method).

5. Estimation of chloride ion using potassium chromate indicator (Mohrsmethod)

6. Determination of pH of a solution and pH metric titration.

7. Preparation of polystyrene by free radical polymerization.

8. Determination of molecular weight of a high polymerViscometry.

9. Determination of single electrode potential.

10. Determination of iron (II) using potentiometer (Redox titration).

11. Determination of equivalent conductance at infinite dilution for a strong electrolyte

(NaCl).

12. Conductometric titration of strong acid Vs strong base (Neutralization titration).

13. Conductometric titration of barium chloride Vs sodium sulphate (Precipitation titration).

14. Determination of corrosion rate and inhibition efficiency of an inhibitor for mild steel in

hydrochloric acid medium (Mass loss method).

(Any 12 experiments from the above list)


40/40

39

CCE110/ /BCCCCE210/

COMPUTER AIDED DRAWING LAB

L T P C

0 0 3 2

List of Exercises using AutoCAD Software

1. Introduction to AutoCAD

2. Basic commands of AutoCAD

3. Modifying commands

4. Editing commands

5. Changing Object Properties

6. Text and Dimensioning

7. Drawing Information

8. Orthographic and Isometric Drawing

9. 3-D Drawing

10. 3-D Model -Wire frame model, Surface model, Solid Model

Text Books:1. Gopalakrishnan K.R. 1983 Engineering Drawing (I and II) Subhas

Stores, Avenue Road, Bangalore, 2008.

2. Natararjan K.V., A text book of Engineering Drawing, DhanalakshmiPublications, Chennai, 2008.

Reference Books:1. Parkinson, A.C. Intermediate Engineering DrawingsELBS.,2009

2. Venugopal K., Engineering Drawing and Graphics, New ageinternational (P) Ltd., Chennai,2010.

3. Narayana K.L., Kannaiah, P & Venkata Reddy K. Machine Drawing, NewAgeInternations,(P) Ltd., Chennai,2007.

4. M.B.Shah and B.C.Rana. Engineering Drawing, Pearson Publications,2010.

5. Dhananjay AJolhe, Engineering Graphics, McGraw-Hill PublishingCompany, Ltd,

2009.

i year syllabus 2013-14.pdf

Documents