i. rationale for regulation country rationale ......iec 60335-2-35 (2002-10) idt remark class 0...

1

THAILAND

I. RATIONALE FOR REGULATION

COUNTRY RATIONALE FOR REGULATION

Thailand Consumer Protection.

II. REGULATION BODY

COUNTRY REGULATORY BODY

Thailand Thai Industrial Standards Institute (TISI) under the Ministry of Industry.

III. LEGISLATIVE FRAMEWORK

COUNTRY LEGISLATIVE FRAMEWORK

Thailand Industrial Product Standards Act. (1968) Industrial Product Standards Act(No.2), B.E. 2522 (1997) Industrial Product Standards Act(No.3), B.E. 2522 (1997) Industrial Product Standards Act(No.4), B.E. 2531 (1989) Industrial Product Standards Act(No.5), B.E. 2535 (1992) Industrial Product Standards Act(No.6), B.E. 2548 (2005) Industrial Product Standards Act(No.7), B.E. 2558 (2015)

2

IV. MANDATORY STANDARDS

REVISED MATRIX ON MANDATORY STANDARDS FOR THAILAND (AS OF July 16, 2020)

No.

Product type or grouping

STANDARDS

Domestic Standards Please tick

box if mandatory

Relevant International Standards

Extent of Alignment

State reason if MOD

Indicate whether requires:

Safety (S), Environment (E),

EMC,

or combination

HS Code

1 Incandescent Tungsten Filament Lamps

Effective date: January 11, 2021

TIS 4 Part 1-2529 (1986)2558 (2015)

IEC 60064 (1993)

IEC 60432-1 (1999)

IEC 60432-1 Ed 2.2 (2012)

NEQ

MOD

Cabs E26, E26d and E26/50x39 are not allowed.

S 8539.22.91 8539.22.93 8539.29.50 8539.29.90 8539.22.92 8539.22.99 8539.29.60

2 PVC insulated Copper cables TIS 11 Part 1-2553 (2010) TIS 11 Part 2-2553 (2010) TIS 11 Part 3-2553 (2010) TIS 11 Part 4-2553 (2010) TIS 11 Part 5-2553 (2010)

TIS 11 Part 101-2553 (2010) 2559(2016)

Effective date: Nov 24, 2020

IEC 60227-1 Ed 3.0 (2007) IEC 60227-2 Ed 2.0 (1997) Am 1 (2003) IEC 60227-3 Ed 2.1 (1997) IEC 60227-4 Ed 2.1 (1997) IEC 60227-5 Ed 2.2 (2003)

All Parts of IEC 60227

MOD

MOD

IDT

IDT

IDT

MOD

Part 1-2553 (2010)

Addition: Subclause 3.4 Packaging

Modification : Subclause 4.1.2

Replace “- two-core cable: no prefer colour scheme;” with “- two-core cable: blue, brown scheme;”

S 8544.49.41 8544.49.42 8544.49.49

3 Ballast for fluorescent lamps TISI 23-2558 (2015) IEC 61347-2-8 (2002), Am 1 (2006)

MOD (Editorial modification)

S 8504.10.00

3

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

4 Starters for fluorescent lamps TIS 183-2547 (2004) IEC 60155 Ed

4.0 (1993), Am.1

(1995)

IDT - S 8536.50.99

5 PVC insulated aluminium cables TIS 293-2541 (1998) - - No IEC standard available

S 8544.49.41

8544.49.42

8544.49.49

6 Lampholders for tubular fluorescent lamps and starterholders

TIS 344-2549 (2006) IEC 60400 Ed

6.2 (2004)

IDT - S 8536.61.10 8536.61.91

7 Electric irons TIS 366-2547 (2004) IEC 60335-2-3 (2002)

IDT Remark Class 0 appliances and class 0I appliances shall comply with Annex P of IEC 60335-1.

S 8516.40.90

8 Motor-compressors : safety requirements

TIS 812-2558 (2015) IEC 60335-2-34 Ed 5.0 (2012)

IDT Remark

Class 0 appliances and class 0I appliances shall comply with Annex P of IEC 60335-1.

S 8414.30.90

9 Electrical Switches TIS 824-2551 (2008) IEC 60669-1 Ed

3.1 (2000) and

Am 2 (2006)

IDT S 8536.50.61

8536.50.69

8536.50.99

4

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

10 Grills, toasters and similar portable cooking appliances

TIS 1641-2552(2009) IEC 60335-2-9 Ed 5.2 (2006)

MOD Sub-clause 6.1 Modification :

Appliances shall be class I, class II or class III.

S 8516.60.90

8516.72.00

8516.79.90

11 Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs)

TIS 909-2548 (2005) IEC 61009-1 (2003)

MOD TIS 909-2548

Sub-clause 1

Replace

“for rated voltages not exceeding 440 V a.c.;”

with

“for rated voltages between 220 and 440 V a.c.;”

Sub-clause 5.3.1

Delete the second row of the table in subclause 5.3.1

Sub-clause 9.22.1.3 Replace the testing temperature

“25 oC 3

oC”

with

“37 oC 3

oC”

S 8536.30.90 8536.50.20

5

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

12 AC electric fans : safety requirements

TIS 934-2558 (2015) IEC 60335-2-80 Ed 2.2 (2008)

IDT Remark


S 8414.51.10 8414.51.91 8414.51.99 8414.59.30 8414.59.41 8414.59.49 8414.59.50 8414.59.91 8414.59.99

13 Double-Capped Fluorescent lamps : safety specification

TIS 956-2557 (2014) Effective Date: Oct 3, 2017

IEC 61195 (1999)

Am 1(2012)

MOD

(Editorial modification)

S 8539.31.10 8539.31.20

14 Electric rice-cookers : safety requirements

TIS 1039-2547 (2004) IEC 60335-2-15 (2002-07)

MOD

(Editorial modification)

Remark


S 8516.60.10

6

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

15 Mains operated electronic and related apparatus for household and similar general use : safety requirements

TIS 1195-2536 (1993) IEC 60065 (1985) Am.1 (1989

MOD TIS 1195-2536

Sub-clause 9.1.1

the current measured shall not exceed 0.3 mA (peak)

S 8504 40.30

8518.10.11

8518.10.19

8518.21.10

8518.21.90

8518.22.10

8518.22.90

8518.40.40

8518.40.90

8518.50.10

8518.50.20

8518.50.90

8519.30.00

8519.81.10

8519.81.20

8519.81.30

8519.81.69

8519.81.79

8519.81.99

8519.89.20

8521.10.90

8521.90.19

8521.90.99

8527.12.00

7

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

8527.13.10

8527.13.90

8527.19.20

8527.19.90

8528.71.11

8528.71.19

8528.71.91

8528.71.99

8528.72.91

8528.72.92

8528.72.99

8528.73.00

9207.10.00

9207.90.00

16 Uninterruptible power system TIS 1291 Part 1-2553 (2010) TIS 1291 Part 2-2553 (2010) TIS 1291 Part 3-2555 (2012)

IEC 62040-1 Ed 1.0 (2008) IEC 62040-2 Ed 2.0 (2005)

IEC 62040-3 Ed 1.0 (1999)

IDT

IDT

IDT

- S 8504.40.11

8504.40.19

17 Tumbler dryers : safety requirements

TIS 1389-2559 (2016) IEC 60335-2-11 Ed 7.1 (2012)


S 8451.21.00

8451.29.00

8

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

18 Washing machines : safety requirements

TIS1463-2556 (2013) IEC 60335-2-7 Ed 7.0 (2008-06)


S 8450.11.10 8450.11.90 8450.12.10 8450.12.90 8450.19.11 8450.19.19 8450.19.91 8450.19.99 8450.20.00

9

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

19 Electric fryers: safety requirements

TIS 1509-2547 (2004) IEC 60335-2-13 Ed 5.0 (2002) IEC 60335-2-15 Ed5.0 (2002)

MOD

MOD

TIS 1509-2547 Clause 1 Scope of the Standard cover fryers, frying pans and similar appliances as defined in Subclause 3.101,3.102 and 3.103 Note 102: Scope of the Standard does not cover high frequency-heating electric fryers. Subclause 3.101 Definition of electric fryers. Subclause 3.102 Definition of electric deep-fryers. Subclause 3.103 Definition of electric frying pans. Clause 6 Classified electric fryers into 3 classes; 0I, I and II.

Remark class 0I appliances shall comply with Annex P of IEC 60335-1

S 8516.60.90

10

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

20 Instantaneous water heaters :safety requirements

TIS 1693-2547 (2004)

-

IEC 60335-2-35 (2002-10)


S 8516.10.11

8516.10.19

21 Microwave ovens safety requirements

TIS 1773-2548 (2005)

IEC 60335-2-25 Ed.5.0 (2002)


S 8516.50.00

11

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

22 Lighting and similar equipment : radio disturbance limits

TIS 1955-2551 (2008) CISPR 15 Ed 7.1 (2007)


EMC 8504.10.00 8504.31.93 8504.31.99 8504.40.30 8539.31.10 8539.31.20 8539.31.30 8539.31.90 8539.39.10 8539.39.30 8539.39.90 8539.50.00 9405.10.91 9405.10.92 9405.10.99 9405.20.90 9405.30.00 9405.40.20 9405.40.40 9405.40.50 9405.40.60 9405.40.99 9405.60.90

23 Appliances for skin or hair care : safety requirement

TIS 1985-2549 (2006) IEC 60335-2-23 Ed 5.0 (2003)


S 8516.31.00 8516.32.00 8516.33.00 8516.79.90

12

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

24 Electric thermo pots TIS 2062-2558 (2015) IEC 60335-2-15 Ed 6 (2012)


TIS 2062-2558

Contents of the standard deals with thermo pots only.

Remark


S 8516.79.90

25 Room Air Conditioners Environment Requirement

: Energy Efficiency

TIS 2134-2553(2002) No Reference - - E 8415.10.10

8415.82.91

8415.90.19

26 Household refrigerators : environmental requirements : energy efficiency

TIS 2186-2547 (2004) No Reference - - E 8418.10.10 8418.21.00 8418.69.30

13

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

27 Household refrigerators : safety requirements

TIS 2214-2548 (2005) IEC 60335-2-24 Ed 6.0 (2002)

MOD TIS 2214-2548

Subclause 5.7

Addition

“Appliances used in Thailand are testes at the ambient temperature for appliances used in warm damp equable climates”

Subclsuse 6.1

Addition

“Appliances used in Thailand shall be class 0I, class I class II and Class III”

Remark

class 0I appliances shall comply with Annex P of IEC 60335-1.

S 8418.10.11 8418.10.19 8418.21.00 8418.21.90

28 Secondary cells and batteries containing alkaline or other non-acid electrolytes - safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications

TIS 2217-2548 (2005) IEC 62133 Ed.1.0 (2002)

IDT - S 8507.30.90 8507.40.90 8507.50.90 8507.60.10 8507.60.90

14

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

29 Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part 1 : general rules

Effective date: January 11, 2021

TIS 2425-2552 (2009) 2560 (2017)

IEC 61008-1 Ed.2.1 (2002)


Subclause 5.3.3 Replacement:

“Standard values of rated residual operating current are

0.006 - 0.01 - 0.01 - 0.015 - 0.3 - 0.5 A.”

S 8536.30.90 8536.50.20

30 Ballasts for tubular fluorescent lamps: energy efficiency requirements

TIS 2337-2557 (2014) IEC 62442-1 (2011)

NEQ - E 8504.10.00

31 Self-Ballasts for general Lighting service

TIS 2234-2557 (2014) IEC 60968 (2012) MOD (Editorial modification)

S 8539.31.30

32 Single-capped fluorescent lamps TIS 2235-2557 (2014) IEC 61199 (2011) MOD (Editorial modification)

S 8539.31.10 8539.31.20 8539.31.90

33 Cord extention sets TIS 2432-2555 (2012) IEC 60884-2-7 (2011)

MOD Plug and socket Configuration-conform with TISI 166

S 8544.42.94 8544.42.96 8544.42.97

34 Portable Power Bank – Safety Requirements

Effective date: November 17, 2020

TIS 2879-2560 (2017) - - No IEC standard available, but used IEC 60950 and IEC 62133 as the references.

S 8507.30.90

8507.40.90

8507.50.90

8507.60.90

15

No.


STANDARDS


box if mandatory


Extent of Alignment

State reason if MOD



EMC,

or combination

HS Code

35 Plugs and Sock-Outlets for household and similar purposes

Effective date: November 12, 2020

TIS 166-2549 (2006) IEC 60884-1 (2002)

- - S 8544.42

8536.69

16

V. MODE OF REGULATION AND TYPES OF CONFORMITY ASSESSMENT REGIMES

COUNTRY TYPES OF CON-FORMITY ASSESS-

MENT REGIMES

MODE OF REGULATION

Thailand Certification Product Certification System of TISI consists of two phases:

1. License Granting

Granting a license is based on:

1.1 The results of tests which are conducted on products in accordance with the application standards.

Consideration on this matter may be:

(1) Product testing by designated laboratories, or

(2) Product testing by testing laboratories being accreditation to ISO/IEC 17025, or

(3) Product testing by testing at manufacturer’s premises under supervision of TISI.

1.2 The results of manufacturer’s quality control system assessment according to specified conditions.

Consideration on this matter may be:

(1) Factory visit for quality control system assessment, or

(2) Acceptation of quality system certificates, or

(3) Acceptation of CoC from the ASEAN Listed CB.

2. Surveillance

After granting a license, the licensee will be followed up by:

2.1 Product sampling from factories for testing,

2.2 Product sampling from market for testing,

2.3 Product sampling for testing each import,

2.4 Factory visit for audit.

17

VI. FLOWCHART OF MEMBER COUNTRIES’ REGIME

Processes Acceptance of Scheme Type 5 product certification

1. Acceptance of Certification

Procedure

a) Supplier submits application, technical documents to lised CAB ;

b) Listed CAB performs type 5 certification and issue CoC; c) Supplier submits CoC, Technical document, Factory

audit report and type test report to Thai Importer.

2. Product registration/

approval

a) Thai Importer submits CoC, Technical document, Factory audit report and type test report to TISI (Regulatory Authority);

b) TISI reviews the submitted documents including CoC; c) TISI grants registration/product approval and/or

registration mark. (max 5 days)

3. Place in market

4. Surveillance audit & market

surveillance

a) Thai Importer affix registration mark on the product; b) Place the product in the market

a) Factory surveillance by listed CAB; b) Factory surveillance audit report evaluation by TISI; c) Market surveillance by TISI.

18

VII. MAINS VOLTAGE, FREQUENCY AND MAINS PLUG CONFIGURATION

Country Mains

Voltage and Tolerance

Mains Frequency

and Tolerance

Applicable Legislation

Mains Plug Configuration

Domestic Standard

Please tick box if

mandatory

Relevant International

Standard

Extent of Alignment

-

Diagram of Mains Plug Configuration-

Thailand Bangkok Metropolitan Area

230 volts 1 phase 2 wires with earth tolerance Max 237 V and Min 214 V

50 Hz

± 1%

NA TIS 166-2535 - - -

TIS 166-2547(2004)

Other Areas

220 volts 1 phase 2 wires tolerance Max 240 V and Min 200 V

Bangkok Metropolitan Area


50 Hz

± 1%

NA - - - -

Other Areas


19

VIII. Marking/Logo

Voluntary certification mark Mandatory certification mark

IX. Other information

None

X. CONTACT PERSON

Country Contact Person and Address

Thailand Mr.Sathaporn Rungrattanaubol Standards Division Thai Industrial Standards Institute (TISI), Ministry of Industry, Rama VI Street, Bangkok 10400 Thailand Telephone (662) 202 3495, Telefax (662) 202 3495 E-mail : [email protected]
mailto:[email protected]

i. rationale for regulation country rationale ......iec 60335-2-35 (2002-10) idt remark class 0...

Documents