i physicsp i llinois george gollin, victoria alcpg, july 2004 1 things that go bump in the pipe:...
TRANSCRIPT
![Page 1: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/1.jpg)
George Gollin, Victoria ALCPG, July 20041IPhysicsPIllinois
Things that go bump in the pipe: understanding acoustic signatures
of NLC rf cavity breakdown
George Gollin
Department of Physics
University of Illinois at Urbana-Champaign
LCRD 2.15
![Page 2: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/2.jpg)
George Gollin, Victoria ALCPG, July 20042IPhysicsPIllinois
Can we learn more about NLC rf cavity breakdown through acoustic signatures of
breakdown events?
1. Who is participating
2. Acoustic properties of heat-annealed Copper
3. Modeling and reconstruction
4. Conclusions
![Page 3: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/3.jpg)
George Gollin, Victoria ALCPG, July 20043IPhysicsPIllinois
Who is participating at UIUC
Joe Calvey (undergraduate)
Michael Davidsaver (undergraduate)
George Gollin (professor, physics)
Mike Haney (engineer, runs HEP electronics group)
Justin Phillips (undergraduate)
Jeremy Williams (postdoc)
Erik Wright (grad student)
Bill O’Brien (professor, EE)
We discuss progress and plans from time to time with Marc Ross at SLAC.
Haney’s PhD is in ultrasound imaging techniques; O’Brien’s group pursues a broad range of acoustic sensing/imaging projects in biological, mechanical,… systems
![Page 4: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/4.jpg)
George Gollin, Victoria ALCPG, July 20044IPhysicsPIllinois
This is what we’re studying
Harry Carter sent us a five-cell structure from Fermilab’s NLC structure factory.
We need to understand its acoustic properties.
Start by pinging copper dowels with ultrasound transducers in order to learn the basics.
![Page 5: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/5.jpg)
George Gollin, Victoria ALCPG, July 20045IPhysicsPIllinois
Copper dowels from Fermilab NLC Structure Factory
NLC structures are heat-brazed together; heating creates crystal grains (domains) which modify the acoustic properties of copper.
Harry had previously sent a pair of copper dowels from their structure manufacturing stock: one was heat-treated, one is untreated.
Marc also sent us a (small) single crystal copper dowel.
#2 is heat-treated…
…#1 is not.
We cut each dowel into three different lengths.
![Page 6: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/6.jpg)
George Gollin, Victoria ALCPG, July 20046IPhysicsPIllinois
Speed of sound and grain structure…
Close-up of one of the (heat-treated) dowel #2 sections.
Note the grain patterns visible at the copper’s surface.
Grain structure is not visible on the surface of dowel #1.
Speed of sound measurement:
vs = 4737 m/sec (no grains)
vs = 4985 m/sec (with grains)
![Page 7: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/7.jpg)
IPhysicsPIllinois
Transducer setup
We can listen for echoes returning to the transducer which fires pings into the copper, or listen to the signal received by a second transducer.
HV pulser
scope trigger
transducer signal
copper dowel Tektronix +WaveStar, also NI PCI-5112 + LabVIEW
+
#1 #2
![Page 8: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/8.jpg)
IPhysicsPIllinois
Transducer setup, on the bench
#1 #2
![Page 9: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/9.jpg)
9IPhysicsPIllinois
Scattering/attenuation at 1.8 MHz in copper
Piezoelectric transducer behaves like a damped 1.8 MHz oscillator.
A “ping” launched into a copper dowel will bounce back and forth, losing energy through
• absorption in the transducer
• scattering of acoustic energy out of the ping
• absorption of acoustic energy by the copper.
69 mm
25 mm
dowel ping
~15 mm
![Page 10: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/10.jpg)
George Gollin, Victoria ALCPG, July 200410IPhysicsPIllinois
Scattering is much more important than attenuationSingle transducer: ping, then listen to baseline “noise” as pulse travels in copper, pumping energy into acoustic baseline “glow.”
At ~5 mm per sec, full scale corresponds to 12 m acoustic path inside the heat-treated (grainy) dowel. The “glow” lasts a long time.
100 sec5 mV
Full scale ~2.4 milliseconds. Lots of round-trips!
![Page 11: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/11.jpg)
George Gollin, Victoria ALCPG, July 200411IPhysicsPIllinois
Condensed matter, as done by folks in HEP
Our model: regular (rectangular, 2D, 3D) grids of mass points connected by springs. Transducer is an array of points driven in unison, with damping.
Speeds of propagation for pressure and shear waves are determined by k1, k2, and k1/k2. We use k2 = k1/2.
We can vary spring constants arbitrarily in order to introduce dislocations and grains: our grain boundaries have smaller spring constants.
k1
k1
k2
k2
![Page 12: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/12.jpg)
IPhysicsPIllinois
Propagation of a 50% shear, 50% compression wave, copper without grains
Note the different propagation speeds.
![Page 13: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/13.jpg)
IPhysicsPIllinois
Propagation of a 50% shear, 50% compression wave, copper without grains
Note the different propagation speeds.
![Page 14: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/14.jpg)
IPhysicsPIllinois
Propagation of a 50% shear, 50% compression wave, copper with grains
Note the disruption of the wave fronts due to scattering!
![Page 15: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/15.jpg)
IPhysicsPIllinois
Propagation of a 50% shear, 50% compression wave, copper with grains
Note the disruption of the wave fronts due to scattering!
![Page 16: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/16.jpg)
IPhysicsPIllinois
Simulated transducer response, some months ago
(We are presently refining our transducer modeling…)
![Page 17: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/17.jpg)
17IPhysicsPIllinois
3-D model we’re working with right now
4 “perfect” transducers, one acoustic excitation spot.
A flaw: transducers are TOO good.
movie plane
transducer
excitation
transducer
transducer
transducer
![Page 18: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/18.jpg)
18IPhysicsPIllinois
The main difficulty…Our general approach has been to assume “perfect knowledge” of the behavior of the copper at the transducers:
• transducer knows about individual motions of each of the individual mass points it touches (a real transducer returns a signal based on the average of all points)
• transducer returns velocity vector of surface points (ours don’t [though this kind exists]: we only measure the component normal to the transducer face
Discarding information degrades our naïve reconstruction algorithm’s performance considerably. (This is what we’re working on now.)
But here’s a look at our naïve approach anyway: it gives an idea of how surprisingly well things work with very limited information.
![Page 19: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/19.jpg)
IPhysicsPIllinois
Acoustic excitation, viewed in one horizontal sliceWe’ll record what the simulated transducers “hear” then try playing it back into the copper to see if we generate a peak in the intensity somewhere which corresponds to the original excitation.
(grain-free “Cu”)
![Page 20: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/20.jpg)
IPhysicsPIllinois
Acoustic excitation, viewed in one horizontal sliceWe’ll record what the simulated transducers “hear” then try playing it back into the copper to see if we generate a peak in the intensity somewhere which corresponds to the original excitation.
(grain-free “Cu”)
![Page 21: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/21.jpg)
IPhysicsPIllinois
Drive transducer signals back into copperNow use measurements from perfect transducers to drive acoustic signals back into the copper… look for an intensity peak:
(grain-free “Cu”)
![Page 22: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/22.jpg)
IPhysicsPIllinois
Drive transducer signals back into copperNow use measurements from perfect transducers to drive acoustic signals back into the copper… look for an intensity peak:
(grain-free “Cu”)
![Page 23: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/23.jpg)
IPhysicsPIllinois
Acoustic excitation, copper with grains
650 grains total; grain size is random, but typically one wavelength
![Page 24: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/24.jpg)
IPhysicsPIllinois
Acoustic excitation, copper with grains
650 grains total; grain size is random, but typically one wavelength
![Page 25: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/25.jpg)
IPhysicsPIllinois
Drive transducer signals back into grainy copper
It still works. BUT these transducers have unrealistic properties: model assumes perfect knowledge of movement of surface everywhere at transducer face. Real transducers don’t work this well.
![Page 26: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/26.jpg)
IPhysicsPIllinois
Drive transducer signals back into grainy copper
It still works. BUT these transducers have unrealistic properties: model assumes perfect knowledge of movement of surface everywhere at transducer face. Real transducers don’t work this well.
![Page 27: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/27.jpg)
27IPhysicsPIllinois
What we are working on
• More realistic modeling of transducer performance
real transducers are insensitive to shear waves, and only provide sums of amplitudes over entire transducer surface.
• Refinement of reconstruction algorithm. So far we find t0 and initial position using something like an autofocus algorithm:
use receiver transducers to “drive” signals backwards in time into copper; find time of maximum rms deviation from constant amplitude.
a real transducer only reports average amplitude over sensor face: it doesn’t project sound backwards in a realistic manner (it produces a narrow beam)
• Measurements of real NLC structure properties
![Page 28: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/28.jpg)
28IPhysicsPIllinois
DOE support
DOE is funding LCRD 2.15!
•$25k FY04
•$35k FY05
•$35k FY06
•Support goes for a mix of instrumentation (more electronics, transducers,…) and student salaries
![Page 29: I PhysicsP I llinois George Gollin, Victoria ALCPG, July 2004 1 Things that go bump in the pipe: understanding acoustic signatures of NLC rf cavity breakdown](https://reader035.vdocuments.site/reader035/viewer/2022062421/56649f445503460f94c65a26/html5/thumbnails/29.jpg)
George Gollin, Victoria ALCPG, July 200429IPhysicsPIllinois
Closing comments• We are working on understanding the reconstruction
limitations imposed by real-world transducers. Most of our modeling to date has assumed our transducers give us perfect information about the Cu surface under the transducer. Reconstruction/resolution is going to be worse with nothing but compression wave sensing, averaged over the entire transducer face.
• We are working at reconciling 3D model predictions with real data.
• We are beginning to work with the 5-cell NLC structure on loan from Fermilab.
• How well will this work? Stay tuned!