hypothesis and test procedures a statistical test of hypothesis consist of : 1. the null hypothesis,...
TRANSCRIPT
Hypothesis and Test Procedures A statistical test of hypothesis consist of :1. The Null hypothesis, 2. The Alternative hypothesis, 3. The test statistic and its p-value4. The rejection region5. The conclusion
1
Chapter 9 - Hypothesis Tests
0H
1H
Definition 9.1:Hypothesis testing can be used to determine whether a statement about the value of a population parameter should or should not be rejected.Null hypothesis, H0 : A null hypothesis is a claim (or statement)
about a population parameter that is assumed to be true. (the null hypothesis is either rejected or fails to be rejected.)Alternative hypothesis, H1 : An alternative hypothesis is a claim
about a population parameter that will be true if the null hypothesis is false.Test Statistic is a function of the sample data on which the decision is to be based.p-value is the probability calculated using the test statistic. The smaller the p-value, the more contradictory is the data to .
2
0H
It is not always obvious how the null and alternative hypothesis should be formulated.
When formulating the null and alternative hypothesis, the nature or purpose of the test must also be taken into account. We will examine:
1) The claim or assertion leading to the test.2) The null hypothesis to be evaluated.3) The alternative hypothesis.4) Whether the test will be two-tail or one-tail.5) A visual representation of the test itself.
In some cases it is easier to identify the alternative hypothesis first. In other cases the null is easier.
9.1 Developing Null and Alternative Hypothesis
9.1.1 Alternative Hypothesis as a Research Hypothesis
• Many applications of hypothesis testing involve an attempt to gather evidence in support of a research hypothesis.
• In such cases, it is often best to begin with the alternative hypothesis and make it the conclusion that the researcher hopes to support.
• The conclusion that the research hypothesis is true is made if the sample data provide sufficient evidence to show that the null hypothesis can be rejected.
Example 9.1: A new drug is developed with the goalof lowering blood pressure more than the existing drug.
• Alternative Hypothesis: The new drug lowers blood pressure more than the existing drug. • Null Hypothesis: The new drug does not lower blood pressure more than the existing drug.
9.1.2 Null Hypothesis as an Assumption to be Challenged
• We might begin with a belief or assumption that a statement about the value of a population parameter is true.
• We then using a hypothesis test to challenge the assumption and determine if there is statistical evidence to conclude that the assumption is incorrect.
• In these situations, it is helpful to develop the null hypothesis first.
Example 9.2 : The label on a soft drink bottle states that it contains at least 67.6 fluid ounces.
• Null Hypothesis: The label is correct. µ > 67.6 ounces.• Alternative Hypothesis: The label is incorrect. µ < 67.6 ounces.
Example 9.3: Average tire life is 35000 miles.
• Null Hypothesis: µ = 35000 miles
• Alternative Hypothesis: µ 35000 miles
9.1.3 How to decide whether to reject or accept ?The entire set of values that the test statistic may assume is
divided into two regions. One set, consisting of values that
support the and lead to reject , is called the rejection
region. The other, consisting of values that support the is
called the acceptance region. H0 always gets “=“.
Tails of a Test
9
0H
1H 0H
0H
Two-Tailed Test
Left-Tailed Test
Right-Tailed Test
Sign in = = or = or
Sign in < >
Rejection Region In both tail In the left tail In the right tail
0H
1H
9.2.1 Type I Error
Because hypothesis tests are based on sample data, we must allow for the possibility of errors. A Type I error is rejecting H0 when it is true.
The probability of making a Type I error when the
null hypothesis is true as an equality is called the
level of significance ().
Applications of hypothesis testing that only control
the Type I error are often called significance tests.
9.2 Type I & Type II Error
9.2.2 Type II Error
A Type II error is accepting H0 when it is false.
It is difficult to control for the probability of making
a Type II error, . Statisticians avoid the risk of making a Type II
error by using “do not reject H0” and not “accept H0”.
Type I and Type II Errors
CorrectDecision
Type II Error
CorrectDecisionType I ErrorReject H0
Do not reject H0
H0 True H0 FalseConclusion
Population Condition
9.3 Population Mean, , ( known and unknown )
Null Hypothesis :
Test Statistic :
13
0 0 :H
• any population, is known and n is largeor• normal population, is known and n is small
• any population, is unknown and n is large
• normal population, is unknown and n is small
xZ
n
xZ s
n
1
xt sn
v n
Alternative hypothesis Rejection Region
14
1 0:H
1 0:H
1 0:H
2 2 or ZZ z z
Z z
Z< z
Definition 9.2: p-value The p-value is the smallest significance level at which the null hypothesis is rejected.
15
0
0
Using the value approach, we reject the null hypothesis, if
value for one tailed test
value for two tailed test2
and we do not reject the null hypothesis, if
value for one tailed
p H
p
p
H
p
test
value for two tailed test2
p
Example 9.4
16
The average monthly earnings for women in managerial and
professional positions is 2400. Do men in the same positions
have average monthly earnings that are higher than those for women ?
A random sampl
RM
e of 40 men in managerial and professional
positions showed 3600 and 400. Test the appropriate
hypothesis using 0.01
n
x RM s RM
Solution
17
0
1
0.01
1.The hypothesis to be tested are,
: 2400
: 2400
2.We use normal distribution 30
3. Rejection Region : Z ; 2.33
4. Test Statistic
H
H
n
z z z
0
3600 2400 18.97
400
40
Since 18.97 2.33, falls in the rejection region, we reject
and conclude that average monthly earnings for men in managerial
and professional positions are significant
xZ
s
n
H
ly higher than those for women.
18
9.4 Population Proportion, p
0 0
0
0 0
Null Hypothesis : :
ˆTest Statistic :
H p p
p pZ
p q
n
Alternative hypothesis Rejection Region
1 0:H p p
1 0:H p p
1 0:H p p
2 2 or ZZ z z
Z z
Z< z
Example 9.5
When working properly, a machine that is used to make chips for calculators
does not produce more than 4% defective chips. Whenever the machine
produces more than 4% defective chips it needs an adjustment. To check if
the machine is working properly, the quality control department at the
company often takes sample of chips and inspects them to determine if the
chips are good or defective. One such random sample of 200 chips taken
recently from the production line contained 14 defective chips. Test at the 5%
significance level whether or not the machine needs an adjustment.
19
Solution
20
0
1
0
0 0
0.05
The hypothesis to be tested are ,
: 0.04
: 0.04
Test statistic is
ˆ 0.07 0.042.17
0.04(0.96)200
Rejection Region : Z ; 1.65
Since 2.17 1.
H p
H p
p pZ
p q
n
z z z
065, falls in the rejection region, we can reject
and conclude that the machine needs an adjustment.
H
2 21 2
1 2 1 22
1 2
2 21 2
1 2 1 22
1 2
1 2
2 21 2
1 2 12
1 2
(i) if ( , ) is known and normally
distributed population
(ii) if ( , ) is unknown, large
30, 30
or ,
x x zn n
s sx x z n
n n
n n
s sx x z x
n n
2 2
1 22
21 2
s sx z
n n
21
9.5 Inferences About the Difference Between Two Population Means
9.5.1 Interval Estimation of 1 2
2 21 2
1 2 , 2 1 21 2
1 2
22 21 2
1 222 2
1 2
1 1 2 2
(iii) if ( , ) is unknown, normally distributed
population and small sample size 30, 30
with 1 1
1 1
v
s sx x t
n n
n n
s sn n
vs s
n n n n
2
22
1 2 1 2
1 2
1 22
for (ii) and (iii) cases, if ( , ) is unknown but we assume = ,
the pooled estimator is used to estimate , then the formula is given as follows:
for large sample size 30, 30 ,
pS
n n
x x z
1 2
1 2
1 2
1 2 2, 21 2
2 21 1 2 2
1 2
1 1
for small sample size 30, 30
1 1
1 1with
2
p
n n p
p
Sn n
n n
x x t Sn n
n s n sS
n n
Example 9.6 :
The scientist wondered whether there was a difference in the average daily
intakes of dairy products between men and women. He took a sample of n =50
adult women and recorded their daily intakes of dairy products in grams per day.
He did the same for adult men. A summary of his sample results is listed below.
Construct a 95% confidence interval for the difference in the average daily intakes
of daily products for men and women. Can you conclude that there is a difference
in the average daily intakes of daily products for men and women?
24
Men Women
Sample size 50 50
Sample mean 780 grams per day 762 grams per day
Sample standard deviation
35 30
Solution
25
2 22 21 2
1 2
1 22
Hence, 95% CI :
35 30780 762 1.96
50 50
18 12.78
[6.78,30.78]
Thus, we should be willin
s sx x z
n n
1 2
g to conclude that there is a difference in the
average daily intakes of daily products for men and women as
0 there is no difference between two population means
is not one of the possible value
1 2s for ( ).
Test statistics:
26
9.5.2 Hypothesis Test For the Difference between Two Populations Means, 1 2
0 1 2Null Hypothesis : : 0H
•
•
•
1 2
For two large and independent samples
and and are known.
1 2 1 2
2 21 2
1 2
x xZ
n n
1 2
1 2
For two large and independent samples
and and are unknown.
(Assume )
1 2 1 2
2 21 2
1 2
x xZ
s sn n
1 2 1 2
1 2
2 21 1 2 2
1 2
1 1
1 1with
2
p
p
x xZ
Sn n
n s n sS
n n
1 2
1 2
For two large and independent samples
and and are unknown.
(Assume )
27
•
• For two small and independent samples taken from two normally distributed populations.
1 2 1 2
2 21 2
1 2
22 21 2
1 22 22 2
1 2
1 1 2 2
1 11 1
x xt
s sn n
s sn n
vs s
n n n n
1 2 1 2
1 2
1 2
1 1
2
p
x xt
Sn n
v n n
1 2
1 2
For two small and independent samples
and and are unknown.
(Assume )
Alternative hypothesis Rejection Region
28
1 1 2: 0H
1 1 2: 0H
1 1 2: 0H
2 2 or ZZ z z
Z z
Z< z
Example 9.7
29
A university conducted an investigation to determine whether
car ownership affects academic achievement was based on two
random samples of 100 male students, each drawn from the
student body. The grad 1
1
2 221 2
2
e point average for the 100 non
owners of cars had an average and variance equal to 2.70
and 0.36 as opposed to 2.54 and 0.40 for the
100 car owners. Do the data present sufficient
n
x
s x s
n
evidence to
indicate a difference in the mean achievements between car owners
and non owners of cars? Test using 0.05
Solution
30
0 1 2
1 1 2
1 2 1 2
2 21 2
1 2
The hypothesis to be tested are ,
: 0
: 0
Therefore, test statistic is
2.70 2.54 1.84
0.36 0.40
100 100
H
H
x xZ Z
s s
n n
z=-1.96 z=+1.96
Do NotReject H 0
00 Reject HReject H
2 2 0.05 2 0.025Rejection Region : Z or Z ; 1.96z z z z
0Since 1.84 does not exceed 1.96 and not less than 1.96, we fail to reject
and that is, there is not sufficient evidence to declare that there is a difference
in the average academic achievement for
H
the two groups.
1 1 2 21 2
21 2
ˆ ˆ ˆ ˆ1 1ˆ ˆ
p p p pp p z
n n
32
9.6 Inferences About the Difference Between Two Population Proportion,
9.6.1 Interval Estimation of
1 2p p
1 2p p
Example 9.8:A researcher wanted to estimate the difference between the percentages of users of two toothpastes who will never switch to another toothpaste. In a sample of 500 users of Toothpaste A taken by this researcher, 100 said that the will never switch to another toothpaste. In another sample of 400 users of Toothpaste B taken by the same researcher, 68 said that they will never switch to another toothpaste. Construct a 97% confidence interval for the difference between the proportions of all users of the two toothpastes who will never switch.
33
Solutions
Toothpaste A : n1 = 500 and x1 = 100
Toothpaste B : n2 = 400 and x2 = 68
The sample proportions are calculated;
Thus, with 97% confidence we can state that the difference between the two
population proportions is between -0.026 and 0.086.
34
1 2
1 1 2 21 2
1 22
100 68ˆ ˆ0.20; 0.17
500 400
A 97% confidence interval ;
ˆ ˆ ˆ ˆ(1 ) (1 )ˆ ˆ
0.20(0.80) 0.17(0.83)0.20 0.17 2.17
500 400
0.03 0.05628
[ 0.026,0.086]
p p
p p p pp p Z
n n
35
9.6.2 Hypothesis Test For the Difference between Two Population Proportion, 1 2p p
0 1 2
1 2 1 2 1 2
1 2
1 2
1 2 1 2
1 2
Null Hypothesis : : 0
Test Statistics :
ˆ ˆˆ where
ˆ ˆ ˆ ˆ(1 ) (1 )
ˆ ˆ
1 1ˆ ˆ
H p p
p p p p x xZ p
n np p p pn n
p p p pZ
pqn n
36
Alternative hypothesis Rejection Region
1 1 2: 0H p p
1 1 2: 0H p p
1 1 2: 0H p p
2 2 or ZZ z z
Z z
Z< z
Example 9.9:Reconsider Example 9.8, At the significance level 1%, can we conclude that the proportion of users of Toothpaste A who will never switch to another toothpaste is higher than the proportion of users of Toothpaste B who will never switch to anothertoothpaste?
37
Solution
38
0 1 2 1 2
1 1 2 1 2
1 2 1 2
1 2
The hypothesis to be tested are ,
: 0 is not greater than
: 0 is greater than
Therefore, test statistic is
ˆ ˆ 0.20 0.17
1 1ˆ ˆ
H p p p p
H p p p p
p p p pZ Z
pqn n
0.01
0
0 1.15
1 1(0.187)(0.813)
500 400
Rejection Region : Z ; 2.33
Since 1.15 2.33, we fail to reject and therefore, we conclude that the
proportions of users of Toothpaste A who will
z z
H
never switch to another toothpaste
is not greater than the proportion of users of Toothpaste B who will never switch
to another toothpaste.