hypack 2012. will act as a ‘viewer’ when no dongle is present. user can display data from...
TRANSCRIPT
HYPACK 2012
Will act as a ‘Viewer’ when no dongle is present.User can display data from different projects.User can enable/disable different files.User cannot run any supporting program. Icons and menus will be disabled.
Rename a project• Open Project Manager• Click on the Project’s name• Select ‘Rename Project’• Enter a new name
Project folder is renamed. Project’s INI file is renamed. Project Manager list is
updated.
Now exports to KMZ for Google Earth
• KMZ contains zipped support files.• Previously exported to KML
KML files didn’t contain support files. If you e-mail someone a KML file, they
won’t be able to display the supporting TIF, DXF or XYZ data.
If you e-mail someone a KMZ file, they can see everything!
KTD Values can be displayed and plotted.
VDATUM info can be imported into KTD EDITOR for display!
UNIVERSAL IMPORT is dead and gone from HYPACK. (Good riddance.)
Each of the following editors now has an import parsing function.
• Border Editor• Line Editor• Target Editor• Manual Tides
Border Report• Displays Perimeter Distance and Area of BRD File• Right-click on BRD File in Project File Listing
Can display user-created symbols!• Create them in the S52 RASTER
SYMBOL EDITOR• Symbols are then available in the
DG2 EDITOR
Save Template Points to XYZ Format• Useful for importing planned line points into ADVANCED
CHANNEL DESIGN
Staggered Parallel Offsets
Start-Line Gate can be moved up/down line from 1st waypoint.• Positive/Negative offsets moves forward/backward along the line.
Create a new planned line on-the-fly in SURVEY’s Area Map window.
VDATUM routine for RTK TIDES can now determine a value if less than four nodes of a cell are populated.
• In early versions, if one of the corners of a VDATUM cell had no value (-999.00), SURVEY would not generate a VDATUM result.
• Now it can work with only one corner with a value!
You can show:• Individual sensor positions
(red)• Vessel reference point
(green)• Vessel tracking point (blue)
Check ‘Device Offsets’ in the Vessels window
Modify the ‘In Center’ Tracking Frame %
• 5 to 25%• Larger values
mean more frequent screen shifts.
Rig Move Driver• BARGE.DLL• Computes real time
distance and bearing for four points on your mobile to the ‘final’ targeted position.
Real time 3D MTX Display
Area Map Display of MTX Real Time MTX 3D Window Display
BMP/JPG Import of Dredge Profiles Located under Editors menu: DREDGE BMP
BUCKETS Program• Create Bucket
Patterns• Utilities – Dredge
Utilities menu• Creates a bucket
pattern design for crane and excavator operations.
SINGLE DAY MANUAL TIDES and MULTI-DAY MANUAL TIDES are now combined into a single program.
Built-in import from ASCII.
Delete Above/Below Line in Profile Window• Line is ‘free hand’.
Clip extents using a Border File
• Survey Window Load a BRD File Clip Inside or Outside
Dynamic Draft Adjustment routine is now available in SBMAX
• Tools – Draft Adjustment menu item.
• Same as DRAFTTABLE.DLL set-up.
Export # of Times Cell is Ensonified
32 and 64-bit versions
2D or 3D sort Older version (2D)
would lose points on vertical surfaces.
Partitions large data sets (>1,000,000 pts) in order to process huge data sets.
Original Data Set
New SORT ResultsOld SORT Results
Methods have been modified to handle complex templates.
• Philadelphia Pre and Post
• AEA 1/2/3• Norfolk• Savannah
Left Slope Center Channel Right Slope
Left Center ChannelSlope
Center Channel
Set Project Depth routine modified.
• In 2011, it maintained the top of bank points and modified the side slope.
• In 2012, it maintains the side slope and modifies the top of bank points.
2011
2012
Output Sheet to:• DXF • DGN (New)• DWG (New) GeoTIF
(New)
Export to DXF/DWG now includes BMP graphics!
Scour Face Volumes
Z-Value at bottom (back) edge.
Z-Value at top (front) edge.Width
1. Generate a Channel (CHN)2. Save your CHN3. Go to TIN vs CHN volumes.
Improved 2-D Sectional Displays
New TIN vs CHN Volume Options• Output ‘Fill’ values• Output ‘Overdepth’ and ‘Contour
Overdepth’ for all CHNs• Group data in report by:
Faces Zones, Sections Zones and Sections
Pre-modeling rotations to get better detail on vertical faces
Before creating the TIN, your data is projected onto a 2D surface. This can create problems when you have vertical walls, as data points with vastly different z-values get projected near the same point.
By rotating the model before projecting it onto the 2D surface, you can get a better model in vertical areas.
Without 3D Adjustment With 3D Adjustment
In Modify – 3D TIN, rotate your tin so that all data points will project onto a 2D surface. Then re-generate the TIN
New color schemes• S-52 (old)• Bathy Blue• Red-yellow-green
Available for display in:• HYPACK SHELL• SURVEY• HYPLOT• ENC EDITOR
Traditional S-52Traditional S-52
Bathy BlueBathy Blue
Red-Yellow-GreenRed-Yellow-Green
User can elect to remove contours not associated with shallow, deep or safety contour.
Pilot Planning Tool• Update chart after
modifying: Tide value Keel clearance Safety margin beneath
keel.• Search for objects that
do not provide minimum clearance.
Rewritten for HYPACK 2012 Better design tools for side
slopes, vertical walls and horizontal shelves.
Converts PLN to CHN Generate planned lines Bring in existing planned
lines and output lines with template info.
Rewritten for HYPACK 2012 Improved to eliminate gaps
between lines and solid fills after moving vertices.
Smooth individual contours. Reduce number of points. Select sections of contours
for smoothing/reduction.
Maintains a history of tests
Replaces TEXT TO XY Program Converts from/to
• X-Y• X-Y-Z• Lat-Long (WGS-84)• Lat-Long (Local Datum)• Lat-Long-Ellipsoid Height WGS84• Lat-Long-Ellipsoid Height Local
32 and 64-bit versions Can sub-divide into
grids and review individual cells
Multiple Un-Do
SIDE SCAN SURVEY• Log Cable Out to HSX File• Log Towfish Parameters
TARGETING & MOSAICING• Multiple ‘un-do’ in Phase I• Use of Multi-core
processors• Auto-smoothing of
heading, track line and bottom track
Surface Sound Velocity Alarm
Range Uncertainty Incorporated into TPU
Shore View Windows Moves to Left or Right
Even more MB Systems available!
Color code track lines with GPS Quality
Save and read offset configuration files
True Heave: Input multiple files
POSPAC/F-180: Select fields to import
Recalculate positions and RTK Tides using updated project geodesy.
Min/Max Speed Filter All display styles are now
available in enhanced graphics.
Multiple transducer data can be color-coded by beam.
Patch Test• Resize windows• Delete previous tests
Survey Window• Display TGT files• Clip data using a BRD file
Utilizes 64-bit processors. Expanded memory access
allows for loading larger files.
CLOUD incorporated into Stage 3
Both 32-bit and 64-bit versions of MBMAX are distributed in HYPACK 2012
Read parameters, tide info and SV info are combined on a single ‘Settings’ page.
Offsets can be stored and quickly recalled.
Different settings can be applied to different files.
Stage 1 allows the user to review raw parameters:
• Tracklines• Speed over ground• Heave-pitch-roll• Tide (conventional, RTK,
true or averaged)
Stage 2 is the area-based (swath) editing.
• New and improved spike filter.
• Can display unlimited number of beams per ping.
Survey window with cloud section boundaries
CLOUD window
Profile window
Stage 3 is now ‘merged’ with Stage 2!
Phase 3