hydraulic multi-stage cementing tool - tiw · pdf filehsct-350 multi-stage tool specifications...
TRANSCRIPT
Hydraulic
Multi-Stage
Cementing
Tool
HSCT-350M Cementing ToolHSCT-350M Cementing Tool
HSCT-350M ToolDouble Ball Metal to Metal Seal
HSCT-350M MULTI-STAGECEMENTING TOOL
HSCT-350MHYDRAULIC STAGE
CEMENTINGCLOSING PLUG
ISO 9001:2008 Certified
API: QR REG #9041
The TIW HSCT-350M multi-stage hydraulic cementing tool
was developed for monobore applications of the open hole
packer multi-frac system.
The stage collar design incorporates a double ball metal to
metal seal to isolate the closing sleeve from the cementing
ports. This provides a high pressure, high temperature seal.
allowing the casing above the open hole packer to be
cemented back to the surface.
The HSCT-350M stage cementing tool is opened
hydraulically with internal casing pressure, eliminating the
need for a free-fall opening cone. The tools compact design
minimizes the number of moving parts and makes the tool
easier to handle.
TIW hydraulic stage cementing tools can be opened
immediately upon displacement of the first stage plugs and
can be run with annulus casing packers and or with a liner.
Features
Tested to 103.4 MPa (15,000 PSI) at 200°C (392°F) with 22 pressure cycles
Metal to metal seals across the cementing ports on the closing sleeve
Each closing sleeve ball seal is machined to the actual dimensions of the outer sleeve to maintainprecise dimensional control and pressure integrity
Concave design eliminates any debris falling down the hole
The sleeve insert is threaded into place and is drilled up in place
Opening pressure can be altered quickly and easily by changing the number of shear pins
The closing sleeve can be closed after the operation
Minimal amounts of aluminum and rubber are the only materials encountered during drill out
MULTI-STAGE CEMENTING TOOL
HSCT-350 MULTI-STAGE TOOL SPECIFICATIONS
MULTI-STAGE CEMENTING TOOL
The above specifications are for the standard tools supplied from L-80 and P-110 material 8RD and Buttress connections.Other sizes, grades and connections are available upon request.Temperature ratings for standard nitrile seals are 135°C (275°F). Special seals are available for H S, CO and geothermal applications.2 2
Sizemm (in)
GradeWeightRange
kg/m (lb/ft)
MaximumOD
mm (in)
MaximumDrillout ID
mm (in)
Overall Lengthmm (in)
114.3(4 1/2)
139.7(5 1/2)
177.8(7)
244.5(9 5/8)
L-80
P-110
L-80
P-110
L-80
P-110
L-80
P-110
14.1-17.26(9.5-11.6)17.26-22.4(11.6-15.1)
20.83(14.0)
23.1-25.3(15.5-17.0)25.3-34.2
(17.0-23.0)34.2-38.7
(23.0-26.0)38.7-47.6
(26.0-32.0)38.7-47.6
(26.0-32.0)48.1-59.5
(32.3-40.0)59.5-69.9
(40.0-47.0)64.7-79.6
(43.5-53.5)
141.3(5.562)
168.4(6.630)
208.28(8.200)
282.6(11.250)
101.0(3.975)
98.8(3.890)124.4
(4.897)122.8
(4.835)121.3(4.77)158.7
(6.251)156.5
(6.161)156.5
(6.161)224.9
(8.855)220.7
(8.689)218.7
(8.609)
8RNDLT&C
729.0(28.7)
754.4(29.7)
789.9(31.1)
922.0(36.3)
BT&C
764.5(30.1)
789.9(31.1)
815.3(32.1)
927.1(36.5)
63.5(2.50)
76.2
Hydraulic Sleeve IDmm (in)
(3.00)
95.25(3.750)
155.6(6.150)
Closing Seat IDmm (in)
80.9(3.187)
132.2(4.063)
104.7(4.125)
196.9(7.750)
(9.3)13.84
(4.375)111.1
(2.917)74.09
(26.88)682.75
(29.28)743.71
(1.50)38.1
(2.00)50.888.9
(3 1/2)
L-80
P-110
Sizemm (in)
114.3(4 1/2)
139.7(5 1/2)
177.8(7)
244.5(9 5/8)
88.9(3 1/2)
Per Screw
4,826(700)
3,275(475)
2,482(360)
4,137(600)
4,826(700)
Range
4,826-27,580(700-4000)
6,550-19,650(950-2850)
4,964-24,822(720-3600)
8,274-24,822(1200-3600)
4,826-27,580(700-4000)
Opening PressureMPa (psi)
(138)61.4
8RND LT&C
84.5(190)74.3(167)99.2(223)93.4(210)104.6(235)164.6(370)130.8(294)175.7(395)247.3(556)186.8(420)263.3(592)391.1(880)
Safe Load Below ToolSF=1.5
1000 daN (1000 lb)
(173)
101.4(228)137.0(308)117.9(265)129.0(29.0)199.3(448)181.9(409)218.0(490)291.1(655)274.9(618)329.2(740)475.9
(1,070)
76.9BT&C
109.9(247)
MaximumInternal Pressure
SF=1.2MPa (psi)
(8,467)
59,000(8,550)80,530
(11,680)50,265(7,290)56,400(8,170)81,700
(11,850)46,890(6,800)57,920(8,400)69,915
(10,140)36,475(5,290)49,506(7,180)64,537(9,360)
47,541
76,651(11,117)
MaximumExternal Pressure
SF= 1.2MPa (psi)
(8,775)
55,022(7,980)84,395
(12,240)48,955(7,100)53,505(7,760)7,600
(11,400)44,930(6,516)55,022(7,980)66,605(9,660)37,715(5,470)42,750(6,200)51,780(7,510)
60,503
74,694(10,833)
For a complete location/contact information list visit www.tiwtools.com.
© Copyright 2014 TIW CorporationAll rights reserved TIW0048A 08/14
TIW Canada, Ltd.507-12th Ave.Nisku, Alberta T9E 7N8Tel: 780-955-2510Toll Free in Canada: 1-888-645-6610Fax: 780-955-2513E-mail: [email protected]
Calgary Sales#1750, 700 6th Avenue SWCalgary, Alberta T2P 0T8Tel: 403-263-9174Toll Free in Canada: 1-877-263-4666Fax: 403-237-5387E-mail: [email protected]