hydraulic hose & hose ends and fittings.pdffor ninety days after the date of purchase, discount...

DiscountDiscount

Hydraulic Hose & Hose EndsSeptember 2006 | Catalog HH609

Limited WarrantyFor ninety days after the date of purchase, Discount Hydraulic Hose.com warrants the products in this catalog to be free from defect in materials and workmanship when properly installed and maintained. Any claim for defects must be in writing and must be received within 90 days of the receipt of the product. Discount Hydraulic Hose.com must have a reasonable opportunity thereafter to examine and investigate. The customer’s exclusive remedy with respect to any claim of any kind whatsoever shall be refund of the purchase price or replacement of the product at the option of Discount Hydraulic Hose.com. In no event shall Discount Hydraulic Hose.com be liable for any incidental or consequential damages whatsoever.

DiscountCustomer Service

800-535-1302 or 215-744-2828Weekdays 8:00 to 5:30 EST

Fax:

215-744-1045

Email:

[email protected]

Discount Hydraulic Hose.com

5606 Tulip StreetPO Box 9580Philadelphia, PA 19124

On the Internet:

www.discounthydraulichose.com

Hydraulic Hose & Hose EndsSeptember, 2006

Prices Subject to Change

Hydraulic Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

General Purpose Hose . . . . . . . . . . . . . . . . . . . . . . . . 9

Truck Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Special Application Hose . . . . . . . . . . . . . . . . . . . . 14

Braided Hose Ends. . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Four-Wire Spiral “W” Hose Ends . . . . . . . . . . . . . . 22

Six-Wire Spiral “JJ” Hose Ends. . . . . . . . . . . . . . . . . 27

R7 Thermoplastic Hose Ends . . . . . . . . . . . . . . . . . 28

R4 Suction Hose Ends. . . . . . . . . . . . . . . . . . . . . . . . 30

Reusable Hose Ends . . . . . . . . . . . . . . . . . . . . . . . . . 32

Push-Lock Hose Barbs . . . . . . . . . . . . . . . . . . . . . . . 37

Multibarb Hose Ends . . . . . . . . . . . . . . . . . . . . . . . . 39

Hose Clamps and Ferrules . . . . . . . . . . . . . . . . . . . 41

Low Pressure Hose Crimpers . . . . . . . . . . . . . . . . . 42

R5 Truck Hose Ends . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Air Brake Hose Ends . . . . . . . . . . . . . . . . . . . . . . . . . 44

30R7 Fuel Line Hose Ends . . . . . . . . . . . . . . . . . . . . 45

R6 General Purpose Hose Ends . . . . . . . . . . . . . . . 45

Beadlock A/C Hose Ends . . . . . . . . . . . . . . . . . . . . . 46

Cam & Groove Hose Ends . . . . . . . . . . . . . . . . . . . . 47

Protective Sleeving & Accessories . . . . . . . . . . . . 50

Hose Assembly Equipment . . . . . . . . . . . . . . . . . . 52

Dies & Crimp Specifi cations . . . . . . . . . . . . . . . . . . 57

Thread Identifi cation . . . . . . . . . . . . . . . . . . . . . . . . 58

Contents Discount

Hydraulic Hose & Hose Ends • HH609 3Call to order: 800-535-1302

Construction: black, oil resistant Nittrile (BTR) tube with one braid of high tensile steel wire reinforcement (two braids on size -08 and larger). Oil and abrasion resistant, black Neoprene (CR) cover.

Temperature Range: -40°F to +212°F

Braided Hose Ends p. 16–21

Construction: black, oil resistant Nittrile (BTR) tube with one braid of high tensile steel wire reinforcement. Oil and abrasion resistant, black Neoprene (CR) cover.


or

Braided Hose Ends p. 16–21 Reusable Hose Ends p. 32

R17 Braided Hydraulic HoseMeets all requirements of SAE 100R17

Recommended for high pressure hydraulic oil lines. No skiving required.Half bend radius: not recommended for outdoor use.

Item # ID ODMax. PSI

Min. Burst

Min. Bend Radius Reel*

ReelPrice

(per foot)

Cut Price

(per foot)

R17-04 1/4" 0.50" 3,000 12,000 2" 800' $0.70 $0.74

R17-06 3/8" 0.66" 3,000 12,000 2½" 500' $0.96 $1.01

R17-08 1/2" 0.80" 3,000 12,000 3½" 350' $1.15 $1.21

R17-10 5/8" 1" 3,000 12,000 4" 520' $2.08 $2.19

R17-12 3/4" 1.12" 3,000 12,000 4¾" 400' $2.47 $2.60

R17-16 1" 1.48" 3,000 12,000 6" 200' $3.64 $3.83

* Reel may not contain one continuous length of hose.

R1 Braided Hydraulic HoseMeets all requirements of SAE 100R1 AT

Recommended for medium pressure hydraulic oil lines. No skiving required. Long-lasting tough cover is well suited for mobile hydraulics.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

R1-04 1/4" .53" 2,750 11,000 4" 800' $0.77 $0.81

R1-06 3/8" .69" 2,250 9,000 5" 500' $0.82 $0.86

R1-08 1/2" .82" 2,000 8,000 7" 350' $1.02 $1.07

R1-10 5/8" .94" 1,500 6,000 8" 650' $1.42 $1.49

R1-12 3/4" 1.10" 1,250 5,000 9½" 500' $1.47 $1.55

R1-16 1" 1.41" 1,000 4,000 12" 280' $2.06 $2.16


Hydraulic HoseDiscount

4 Hydraulic Hose & Hose Ends • HH609 Call to order: 800-535-1302

Construction: black, oil resistant Nittrile (BTR) tube with two braids of high tensile steel wire reinforcement. Oil and abrasion resistant, black Neoprene (CR) cover.





or

Braided Hose Ends p. 16–21 Reusable Hose Ends p. 32

R16 Braided Hydraulic HoseMeets all requirements of SAE 100R16

Recommended for high pressure hydraulic oil lines. No skiving required.Half bend radius: not recommended for outdoor use.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

R16-04 1/4" 0.55" 5,000 20,000 2" 700' $0.81 $0.85

R16-06 3/8" 0.67" 4,000 16,000 2½" 450' $1.08 $1.13

R16-08 1/2" 0.81" 3,500 14,000 3½" 320' $1.21 $1.27

R16-10 5/8" 0.93" 2,750 11,00 4" 520' $1.76 $1.86

R16-12 3/4" 1.07" 2,250 9,000 4¾" 400' $1.84 $1.93

R16-16 1" 1.37" 2,000 8,000 6" 200' $2.61 $2.74


R2 Braided Hydraulic HoseMeets all requirements of SAE 100R2 AT

Recommended for high pressure hydraulic oil lines. No skiving required. Long-lasting tough cover is well suited for mobile hydraulics.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

R2-04 1/4" 0.59" 5,000 20,000 4" 700' $0.83 $0.87

R2-06 3/8" 0.75" 4,000 16,000 5" 450' $0.99 $1.04

R2-08 1/2" 0.88" 3,500 14,000 7" 320' $1.09 $1.14

R2-10 5/8" 0.98" 2,750 11,000 8" 520' $1.53 $1.62

R2-12 3/4" 1.16" 2,250 9,000 9½" 400' $1.62 $1.70

R2-16 1" 1.50" 2,000 8,000 12" 200' $2.21 $2.33

R2-20 1¼" 1.87" 1,625 6,500 16½" 131' $6.89 $7.23

R2-24 1½" 2.17" 1,250 5,000 20" 131' $8.24 $8.42

R2-32 2" 2.66" 1,125 4,500 25" 131' $10.21 $10.72




Construction: black, oil resistant synthethic rubber tube with four spiral layers of high tensile steel wire reinforcement. Oil and abrasion resistant, gray synthetic rubber cover.


Four-Wire Spiral “W” Hose Ends p. 22–24

Construction: black, oil resistant synthethic rubber tube with four spiral layers of high tensile steel wire reinforcement. Oil and abrasion resistant, gray synthetic rubber cover.


Four-Wire Spiral “W” Hose Ends p. 22–24

4SH Spiral Hydraulic HoseMeets all requirements of DIN 20023

Recommended for petroleum and water-based hydraulic fl uids in very high pressure hydraulic lines.


Min. Burst

Min. Bend Radius Coil

CoilPrice

(per foot)

Cut Price

(per foot)

4SH-12 3/4" 1.21" 6,095 24,380 9½" 131' $6.97 $7.32

4SH-16 1" 1.50" 5,515 22,060 12" 131' $11.81 $12.40

4SH-20 1¼" 1.85" 5,000 20,000 16½" 131' $12.27 $12.89

4SH-24 1½" 2.11" 4,200 16,800 20" 131' $16.09 $16.89

4SH-32 2" 2.63" 3,625 14,500 25" 131' $20.28 $21.29

R12 Spiral Hydraulic HoseMeets all requirements of SAE 100R12



Min. Burst


CoilPrice

(per foot)

Cut Price

(per foot)

R12-06 3/8" 0.80" 4,000 16,000 5" 131' $2.88 $3.03

R12-08 1/2" 0.94" 4,000 16,000 7" 131' $3.13 $3.29

R12-12 3/4" 1.21" 4,000 16,000 9½" 131' $4.17 $4.39

R12-16 1" 1.50" 4,000 16,000 12" 131' $4.95 $5.20

R12-20 1¼" 1.85" 3,000 12,000 16½" 131' $9.38 $9.85

R12-24 1½" 2.11" 2,500 10,000 20" 131' $11.08 $11.64

R12-32 2" 2.63" 2,500 10,000 25" 131' $16.93 $17.78



Construction: black, oil resistant synthethic rubber tube with six spiral layers of high tensile steel wire reinforcement (four layers in 1" and smaller). Oil and abrasion resistant, black synthetic rubber cover.


Six-Wire Spiral “JJ” Hose Ends p. 25–26

R13 Spiral Hydraulic Hose Meets all requirements of SAE 100R13



Min. Burst


CoilPrice

(per foot)

Cut Price

(per foot)

R13-12 3/4" 1.26" 5,000 20,000 9½" 131' $8.06 $8.47

R13-16 1" 1.54" 5,000 20,000 12" 131' $12.01 $12.61

R13-20 1¼" 1.96" 5,000 20,000 16½" 131' $17.54 $18.42

R13-24 1½" 2.26" 5,000 20,000 20" 131' $20.74 $21.78

R13-32 2" 2.8" 5,000 20,000 25" 131' $26.47 $27.80




HJK 10,000psi Jack HoseRecommended for high pressure jack oil lines.


Min. Burst

Min. Bend Radius Reel

ReelPrice

(per foot)

Cut Price

(per foot)

HJK-04 1/4" 0.59" 10,000 20,000 4" 700' $1.26 $1.34

HJK-06 3/8" 0.75" 10,000 20,000 7" 450' $1.69 $1.79




Construction: Black, oil resistant Nittrile (BTR) tube with two braids of textile reinforcement, pretreated for tube and cover adhesion. Helix wires between the braids resist collapse under vacuum or bending. Oil and abrasion resistant, black Neoprene (CR) cover.


or

R4 Suction Hose Ends p. 30–31

R4 Suction & Return HoseMeets all requirements of SAE 100R4

Recommended for petroleum and water-based hydraulic fl uids in low pressure and vacuum service.


Min. Burst

Rated Suction


CoilPrice

(per foot)

Cut Price

(per foot)

R4-12 3/4" 1.24" 300 1,200 25"/hg. 5" 131' $3.20 $3.37

R4-16 1" 1.53" 250 1,000 25"/hg. 6" 131' $3.94 $4.14

R4-20 1¼" 1.78" 200 800 25"/hg. 8" 131' $4.12 $4.34

R4-24 1½" 2.07" 150 600 25"/hg. 10" 131' $4.45 $4.67

R4-32 2" 2.54" 100 400 25"/hg. 12" 131' $4.79 $5.04

Hydraulic Hose

Oil Absorbent

High performance granular liquid absorbent will help reduce hazards related to liquid spills that may lead to fi re or unsafe footing. Designed to enhance the bio-degradation of liquid spills such as hydraulic oil, gasoline, kerosene, water, grease, acids, paint, printing ink and other liquid mixtures. 40 lb. bag

ABSORB-40 $9.99

Discount


Construction: black, oil resistant Nittrile (BTR) tube with two braids of fi ber reinforcement. Oil and abrasion resistant, black Neoprene (CR) cover.



Construction: black, oil resistant Nittrile (BTR) tube with one braid of fi ber reinforcement. Oil and abrasion resistant, black Neoprene (CR) cover.


R6 General Purpose Hose Ends p. 45

R3 Hydraulic HoseMeets all requirements of SAE 100R3

Recommended for medium pressure fuel and oil lines, hydraulic return and suction lines.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

R3-04 1/4" 0.57" 1,250 5,000 3" 250' $1.66 $1.75

R3-06 3/8" 0.75" 1,125 4,500 4" 250' $1.74 $1.84

R3-08 1/2" 0.94" 1,000 4,000 5" 250' $2.38 $2.50

R3-12 3/4" 1.25" 750 3,000 6" 250' $3.45 $3.62

R3-16 1" 1.50" 565 2,250 8" 250' $4.09 $4.29

R6 General Purpose HoseMeets all requirements of SAE 100R6

Recommended for general purpose air, oil, and water lines.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

R6-04 1/4" .50" 400 1,600 2½" 250' $0.91 n/a

R6-05 5/16" .57 400 1,600 3" 250' $0.98 n/a

R6-06 3/8" .63" 400 1,600 3" 250' $1.11 $1.17

General Purpose HoseDiscount


Construction: black PVC tubing with high tensile polyester yarn reinforcement. and colored PVC cover (available in red, blue, yellow, green, and gray)

Temperature Range: -15°F to 150°F

Multibarb Hose Ends p. 39-40Clamps and Ferrules p. 41

Multipurpose Air & Water HoseRecommended for air, water, and mild water-soluble chemicals. Ideal for in-plant operations requiring color coding of hose supply lines.

Item # ID ODMax. PSI @ 70°F

Max. PSI @ 122°F Reel

Reel Price

(per foot)

Cut* Price

(per foot)

K1134-04 1/4" .500" 300 180 500' $0.35 $0.37

K1134-05 5/16" .625" 300 180 500' $0.45 $0.48

K1134-06 3/8" .625" 300 180 500' $0.42 $0.44

K1134-08 1/2" .813" 300 180 500' $0.53 $0.56

K1134-10 5/8" .906" 300 180 300' $0.69 $0.74

K1134-12 3/4" 1.125" 300 180 300' $0.96 $1.01

K1134-16 1" 1.406" 300 180 300' $1.26 $1.32

* Multipurpose Air & Water Hose only available in full reel or 100 ft. lengths

Red (K1134) available in all sizes Yellow (K1131) available in sizes -04, -06, 08, -12 and -16Blue (K1136) available in sizes -04, -06, 08, -12 and -16 Green (K1137) available in size -06 onlyGrey (K1138) available in sizes -04, -06, 08, -12 and -16

Construction: black EPDM inner tube with multi-fi ber spiral reinforcement and red EPDM outer cover.

Temperature Range: -40°F to +160°F (water up to 180°F)


Heavy Duty Red Air HoseRecommended for air and water applications where petroleum contact is limited. Also recommended for some agricultural solutions. Not recommended for hydraulic fl uids.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

1145-04400 1/4" 0.63" 300 1,200 3" 700' $0.48 $0.51

1145-05400 5/16" 0.63" 300 1,200 3¼" 700' $0.54 $0.57

1145-06400 3/8" 0.72" 300 1,200 3¼" 700' $0.60 $0.63

1145-08400 1/2" 0.88" 300 1,200 4½" 700' $0.72 $0.77

1145-10400 5/8" 1.00" 300 1,200 5¼" 700' $0.86 $0.91

1145-12400 3/4" 1.16" 300 1,200 5¾" 700' $1.08 $1.14

1145-16300 1" 1.44" 200 800 7¾" 700' $1.55 $1.63

1145-20100 1¼" 1.78" 150 600 8¾" 550' $2.06 $2.17

1145-24100 1½" 2.03" 150 600 10½" 400' $2.46 $2.58

1145-32100 2" 2.50" 150 600 14" 300' $3.25 $3.42




Construction: clear PVC tubing with high tensile polyester yarn reinforcement.

Temperature Range: 14°F to 149°F


Clear Braided PVC TubingRecommended for various machine tools and transportation of chemicals.

Item # ID OD Max. PSI CoilCoil Price

(per foot)Cut Price

(per foot)

IBR0446 1/4" .50" 142 300' $0.36 n/a

IBR0609 3/8" .63" 114 300' $0.45 n/a

IBR0812 1/2" .75" 100 300' $0.57 n/a

IBR1218 3/4" 1.06" 71 300' $1.11 n/a

IBR1621 1" 1.31" 71 200' $1.42 n/a

Construction: black, oil resistant Nittrile (BTR) tube with braided fi ber reinforcement. Oil and abrasion resistant, black Neoprene (CR) cover.


Push-Lock Hose Barbs p. 37–38 No clamp needed

Push-Lock Low Pressure HoseRecommended use: low pressure air, fuel, oil, and water lines. Also available in Blue, Gray, Red, Yellow, and Green (add 10% to price). Please specify color when ordering.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

3384-0430 1/4" .50" 250 1,000 3" 250' $0.65 $0.69

3384-0630 3/8" .62" 250 1,000 3" 250' $0.80 $0.84

3384-0830 1/2" .75" 250 1,000 5" 250' $0.95 $1.00

3384-1030 5/8" .91" 250 1,000 6" 250' $1.34 $1.41

3384-1230 3/4" 1.03" 250 1,000 7" 250' $1.65 $1.74




Construction: synthetic rubber tube with spiral multi-fi ber reinforcement and neoprene cover.


Air Brake Hose Ends p. 44

Air Brake HoseMeets all requirements of SAE J1402A and DOT, Type AII

Recommended for air brake applications.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

00482106499 3/8" 0.75" 225 900 3.5" 500' $0.93 n/a

00482106498 3/8" 0.75" 225 900 3.5" 250' $0.98 n/a

00482106451 3/8" 0.75" 225 900 3.5" 50' $1.04 n/a

00482108500 1/2" 0.88" 225 900 4" 500' $1.11 n/a

00482108498 1/2" 0.88" 225 900 4" 250' $1.20 n/a

00482108451 1/2" 0.88" 225 900 4" 50' $1.26 n/a

* 250' and 500' reels may not contain one continuous length of hose.

Construction: polychloropene barrier inner tube. Braided textile reinforcement. Oil and abrasion resistant EPDM cover.


Beadlock A/C Hose Ends p. 46

BH Air Conditioning HoseMeets all requirements for SAE J2064 Type C Class II

Recommended for R12 and R134a refrigerant application. Ideal for heavy duty truck use as well as industrial and automotive applications.

Sold in 50 foot lengths only.


Min. Burst


CoilPrice

(per foot)

Cut Price

(per foot)

BH-06 5/16" .75" 350 2,000 4" 50' $1.62 n/a

BH-08 13/32" .91" 350 2,000 4¾" 50' $1.86 n/a

BH-10 1/2" 1.00" 350 2,000 5½" 50' $2.20 n/a

BH-12 5/8" 1.13" 350 1,750 6½" 50' $2.43 n/a

Truck HoseDiscount


Construction: black, oil resistant Nittrile (BTR) tube reinforced with one fi ber braid and one steel wire braid. Braided fi ber cover.

Temperature Range: Hydraulic fl uids: -40°F to +212°FAir Brake: -40°F to +200°FHot Oil (-04 to -16): -40°F to +302°F Hot Oil (-20 to -32): -40°F to +250°F

or

R5 Truck Hose Ends p. 43Reusable Hose Ends p. 33–34

Construction: black, oil resistant Nittrile (BTR) tube with multifi ber braided reinforcement. Hypalon cover.


30R7 Fuel Line Hose Ends p. 45

30R7 Fuel Line HoseMeets all requirements of SAE 30R7

Recommended for low pressure / high temperature fuel for passenger car, light truck and small engine applications. Not intended for fuel injection applications.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

30R7-03 3/16" .41" 50 250 2" 700' $0.54 n/a

30R7-04 1/4" .50" 50 250 2½" 700' $0.62 n/a

30R7-05 5/16" .57" 50 250 2¾" 700' $0.75 n/a

30R7-06 3/8" .63" 50 250 3" 700' $0.78 n/a


R5 Truck HoseMeets all requirements of DOT1, SAE 100R5 and SAE J1402

Recommended for air brake, fuel, grease lines, high temperature petroleum oils and medium pressure hydraulic applications. Sizes -16 thru -24 are not SAE or DOT approved for air brake applications.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

R5-04 3/16" 0.51" 3,000 12,000 3" 250' $2.83 $2.97

R5-05 1/4" 0.57" 3,000 12,000 3½" 250' $2.90 $3.05

R5-06 5/16" 0.67" 2,250 9,000 4" 250' $3.34 $3.51

R5-08 13/32" 0.76" 2,000 8,000 4½" 250' $3.49 $3.67

R5-10 1/2" 0.92" 1,750 7,000 5½" 250' $4.27 $4.49

R5-12 5/8" 1.07" 1,500 6,000 6½" 250' $5.25 $5.52

R5-16 7/8" 1.23" 800 3,200 7½" 250' $5.95 $6.25

R5-20 1⁄" 1.50" 625 2,500 9" 150' $7.64 $8.03

R5-24 1⁄" 1.75" 500 2,000 10½" 100' $8.90 $9.35

R5-32 1⁄" 2.10" 350 1,400 13¼" 100' $10.94 $11.50


Truck HoseDiscount


Construction: synthetic oil-resistant thermoplastic core with tigh tensile synthetic fi ber reinforcement. Orange abrasion-resistant polyurethane cover for applications requiring a high degree of non-conductivity.


or

R7 Thermoplastic Hose Ends p. 28–29Reusable Hose Ends p. 34

R7 Twinline Thermoplastic Hose Meets all requirements of SAE 100R7

Recommended for medium pressure hydraulic lines, lubrication, medium pressure gas, and solvent. Available in black or nonconductive orange. Please specify when ordering.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

R7-04 T 1/4" 0.51" 2,750 11,000 1¼" 500' $2.47 $2.60

R7-06 T 3/8" 0.65" 2,250 9,000 2" 500' $3.35 $3.52

R7-08 T 1/2" 0.81" 2,000 8,000 3" 250' $5.05 $5.30


Construction: synthetic oil-resistant thermoplastic core with tigh tensile synthetic fi ber reinforcement. Orange abrasion-resistant polyurethane cover for applications requiring a high degree of non-conductivity.


or

R7 Thermoplastic Hose Ends p. 28–29Reusable Hose Ends p. 34

R7 Thermoplastic Hose Meets all requirements of SAE 100R7

Recommended for medium pressure hydraulic lines, lubrication, medium pressure gas, and solvent. Available in black or nonconductive orange. Please specify when ordering.


Min. Burst


ReelPrice

(per foot)

Cut Price

(per foot)

R7-02 1/8" 0.33" 2,500 10,000 1/2" 500' $0.67 $0.71

R7-03 3/16" 0.41" 3,000 12,000 3/4" 500' $0.90 $0.95

R7-04 1/4" 0.51" 2,750 11,000 1¼" 500' $1.08 $1.14

R7-05 5/16" 0.59" 2,500 10,000 1¾" 500' $1.35 $1.42

R7-06 3/8" 0.65" 2,250 9,000 2" 500' $1.40 $1.47

R7-08 1/2" 0.81" 2,000 8,000 3" 250' $2.16 $2.27


Special Application HoseDiscount


Construction: Tefl on® (PTFE) inner tube with stainless steel (type 304) braided reinforcement and outer cover.


Reusable Hose Ends p. 35–36

R14 Tefl on® (PTFE) HoseMeets all requirements of SAE 100R14A

Recommended for steam, solvents, fuels, hydraulic fl uids, most chemicals and acids. Vibration absorption and high temperature and pressure ranges make Tefl on® hose extremely versatile.


Min. Burst


CoilPrice

(per foot)

Cut Price

(per foot)

R14-04 3/16" .30" 3,000 12,000 2" 50' $1.71 $1.81

R14-05 1/4" .38" 3,000 12,000 3" 50' $2.01 $2.11

R14-06 5/16" .44" 2,500 10,000 4" 50' $2.21 $2.33

R14-07 3/8" .52" 2,000 8,000 5" 50' $2.93 $3.08

R14-08 13/32" .54" 2,000 8,000 5" 50' $2.90 $3.05

R14-10 1/2" .63" 1,500 6,000 6½" 50' $3.49 $3.67

R14-12 5/8" .76" 1,200 4,800 7½" 50' $4.32 $4.55

R14-14 3/4" .89" 1,000 4,000 8½" 50' $6.11 $6.42

R14-16 7/8" 1.03" 1,000 4,000 9" 50' $6.24 $6.56

R14-18 1" 1.22" 1,000 4,000 12" 50' $10.16 $10.67

Special Application Hose

Oil Absorbent


ABSORB-40 $9.99

Discount


FJX- 08 - 10

HOSE FITTING

FJX

Female JIC 37° Swivel

FJX-02-03 $2.10FJX-03-04 $2.20FJX-03-05 $1.99FJX-04-03 $3.43FJX-04-04 $1.82FJX-04-04 275 @ $1.64FJX-04-05 $1.87FJX-04-06 $1.88FJX-04-06 250 @ $1.70FJX-04-08 $2.02FJX-06-04 $5.73FJX-06-05 $3.53FJX-06-06 $2.15FJX-06-06 175 @ $1.94FJX-06-08 $2.16FJX-06-08 150 @ $1.96FJX-06-10 $3.07FJX-06-12 $9.40FJX-08-06 $3.11FJX-08-08 $2.81FJX-08-08 115 @ $2.54FJX-08-10 $3.18FJX-08-10 110 @ $2.86FJX-08-12 $4.49FJX-08-16 $11.30FJX-10-08 $7.35FJX-10-10 $4.90FJX-10-12 $4.66FJX-12-08 $2.87FJX-12-10 $8.80FJX-12-12 $4.63FJX-12-12 60 @ $4.17FJX-12-14 $5.92FJX-12-16 $5.87FJX-16-12 $7.27FJX-16-14 $13.70FJX-16-16 $8.11FJX-16-16 40 @ $7.30FJX-16-20 $17.30FJX-20-20 $17.71

FJXSS

316 Stainless Steel


FJXSS-04-04 $34.34FJXSS-06-06 $36.80FJXSS-06-08 $56.43FJXSS-08-08 $44.16FJXSS-08-10 $58.88FJXSS-12-12 $66.25FJXSS-16-16 $71.16

FJX45


45° Elbow

FJX45-04-04 $4.51FJX45-04-05 $5.09FJX45-04-06 $4.99FJX45-06-04 $5.37FJX45-06-06 $4.85FJX45-06-08 $5.14FJX45-08-06 $5.96FJX45-08-08 $5.15FJX45-08-10 $6.10FJX45-10-10 $8.56FJX45-10-12 $9.57FJX45-12-12 $10.23FJX45-12-16 $16.01FJX45-16-16 $17.95FJX45-20-20 $33.73

FJX90


90° Elbow

FJX90-04-04 $4.62FJX90-04-04 250 @ $4.16FJX90-04-05 $5.38FJX90-04-06 $4.66FJX90-06-04 $4.97FJX90-06-06 $4.62FJX90-06-06 150 @ $4.16FJX90-06-08 $5.12FJX90-08-06 $6.34FJX90-08-08 $5.98FJX90-08-08 100 @ $5.38FJX90-08-10 $10.61FJX90-08-12 $10.17FJX90-10-10 $8.34FJX90-10-12 $11.91FJX90-12-12 $10.23FJX90-12-12 40 @ $9.22FJX90-12-16 $14.86FJX90-16-16 $15.69FJX90-16-16 20 @ $14.12FJX90-20-20 $49.24

FJX90L


90° Elbow Long Drop

FJX90L-04-04 $4.51FJX90L-04-06 $4.69FJX90L-06-04 $7.04FJX90L-06-06 $7.45FJX90L-06-08 $5.99FJX90L-08-08 $8.40FJX90L-08-10 $7.12FJX90L-10-10 $8.34FJX90L-12-12 $9.67FJX90L-16-16 $17.16

MJ

Male JIC 37°

MJ-04-04 $1.88MJ-04-05 $1.91MJ-04-06 $2.08MJ-06-06 $2.08MJ-06-08 $2.12MJ-06-10 $4.76MJ-08-08 $2.45MJ-08-08 150 @ $2.22MJ-08-10 $2.84MJ-08-12 $5.51MJ-10-10 $3.63MJ-10-12 $4.12MJ-12-10 $8.39MJ-12-12 $3.53MJ-12-12 70 @ $3.18MJ-12-14 $4.94MJ-12-16 $5.29MJ-16-16 $6.82MJ-16-16 45 @ $6.15MJ-20-20 $11.32

MJSS

316 Stainless Steel

Male JIC 37°

MJSS-04-04 $28.06MJSS-06-06 $32.24MJSS-08-08 $37.34MJSS-12-12 $54.08MJSS-16-16 $58.20

Braided Hose EndsSteel Crimp Fittings for SAE 100R1-AT, 100R2-AT, 100R3, 100R16, and 100R17 Hydraulic Hose

Discount


Tefl on® Paste

Temp. range: -300° to 500° F

LCTS14 ¼ pt $9.94LCTS1 ½ pt $14.47LCTS2 1 pt $22.68

1/2" Tefl on® Tape

Meets military spec: MIL-T-27730A

TTA50 260" $.60TTB50 520" $.92

MP

Male Pipe (NPT)

MP-04-02 $1.61MP-04-04 $1.55MP-04-04 300 @ $1.40MP-04-06 $1.64MP-04-06 250 @ $1.49MP-04-08 $4.30MP-06-04 $1.53MP-06-06 $1.74MP-06-06 200 @ $1.57MP-06-08 $2.02MP-06-08 150 @ $1.82MP-08-04 $3.37MP-08-06 $1.94MP-08-08 $1.97MP-08-08 120 @ $1.78MP-08-12 $3.04MP-10-06 $7.73MP-10-08 $4.46MP-10-12 $4.01MP-12-08 $5.63MP-12-12 $3.54MP-12-12 70 @ $3.19MP-12-16 $6.08MP-16-12 $4.80MP-16-16 $5.46MP-16-16 40 @ $4.92MP-20-20 $12.06

MPSS

316 Stainless Steel

Male Pipe (NPT)

MPSS-04-04 $22.07MPSS-06-06 $24.79MPSS-08-08 $31.89MPSS-12-12 $49.07MPSS-16-16 $53.98

MPX

Male Pipe (NPT) Swivel

MPX-04-02 $4.33MPX-04-04 $3.22MPX-04-04 250 @ $2.91MPX-04-06 $3.88MPX-06-04 $3.37MPX-06-06 $2.97MPX-06-06 150 @ $2.68MPX-06-08 $3.68MPX-08-06 $3.68MPX-08-08 $3.16MPX-08-08 100 @ $2.85MPX-12-12 $5.20MPX-12-12 60 @ $4.69MPX-16-16 $9.91MPX-16-16 30 @ $8.92

MPX90


90° Elbow

MPX90-04-04 $5.68MPX90-04-06 $6.28MPX90-06-04 $7.46MPX90-06-06 $6.24MPX90-06-08 $7.10MPX90-08-08 $6.86MPX90-12-12 $11.80

FPX

Female Pipe (NPSM)

Swivel

FPX-03-04 $4.44FPX-04-04 $3.38FPX-06-06 $3.66FPX-08-08 $4.33FPX-12-12 $6.94FPX-16-16 $9.03FPX-20-20 $14.92

FP

Female Pipe (NPT)

FP-04-02 $3.63FP-04-04 $2.59FP-06-04 $6.12FP-06-06 $2.45FP-08-08 $2.79FP-12-12 $6.36FP-16-16 $11.68

MBX

Male O-Ring Boss Swivel

MBX-04-04 $3.55MBX-04-06 $4.00MBX-06-06 $3.16MBX-06-08 $3.75MBX-08-08 $3.81MBX-08-10 $3.93MBX-12-12 $8.32

MB

Male O-Ring Boss

MB-03-04 $2.06MB-04-04 $2.55MB-04-05 $4.08MB-04-06 $2.54MB-04-08 $5.84MB-06-06 $2.64MB-06-08 $2.38MB-06-10 $5.14MB-08-08 $2.38MB-08-10 $3.27MB-08-12 $13.00MB-10-10 $6.61MB-10-12 $5.68MB-12-10 $5.29MB-12-12 $6.40MB-16-16 $7.27

MBX90

Male O-Ring Boss Swivel

90° Elbow

MBX90-04-04 $5.47MBX90-04-06 $5.64MBX90-06-06 $6.48MBX90-06-08 $7.02MBX90-06-10 $8.96MBX90-08-08 $7.33MBX90-08-10 $7.90MBX90-08-12 $20.34MBX90-12-12 $16.69


Discount


FFX

Female Face Seal Swivel

FFX-04-04 $3.16FFX-04-06 $3.72FFX-06-04 $8.29FFX-06-06 $3.64FFX-06-08 $4.14FFX-08-06 $6.94FFX-08-08 $4.40FFX-08-10 $6.36FFX-08-12 $8.72FFX-10-08 $9.00FFX-10-10 $7.17FFX-10-12 $8.52FFX-12-10 $12.91FFX-12-12 $8.34FFX-12-16 $15.56FFX-16-16 $14.14FFX-16-20 $17.32FFX-20-20 $36.98FFX-20-24 $20.17

FFX45


45° Elbow

FFX45-04-04 $5.90FFX45-04-06 $7.48FFX45-06-06 $6.42FFX45-06-08 $8.34FFX45-08-08 $8.04FFX45-08-10 $10.55FFX45-10-10 $10.69FFX45-10-12 $13.00FFX45-12-10 $17.58FFX45-12-12 $16.64FFX45-12-16 $20.59FFX45-16-16 $19.67FFX45L-16-16 $29.84FFX45LL-16-16 $32.87FFX45-16-20 $28.54FFX45-20-20 $44.27

FFX90


90° Elbow

FFX90-04-04 $5.98FFX90-04-06 $6.84FFX90-06-06 $6.27FFX90-06-08 $8.03FFX90-08-08 $7.37FFX90-08-10 $8.74FFX90-08-12 $25.23FFX90-10-10 $10.18FFX90-10-12 $13.56FFX90-12-12 $15.96FFX90-12-16 $36.89FFX90-16-16 $18.69FFX90-20-20 $45.72

FFX90M


90° Elbow Medium

FFX90M-04-04 $8.78FFX90M-06-06 $9.31FFX90M-08-08 $10.41FFX90M-10-10 16.17FFX90M-12-12 $22.26FFX90M-16-16 $19.91

FFX90L


90° Elbow Long

FFX90L-04-04 $7.13FFX90L-06-06 $8.01FFX90L-08-08 $8.50FFX90L-08-10 $18.56FFX90L-10-10 16.17FFX90L-12-12 $16.11FFX90L-16-16 $22.54

MF

Male Face Seal

MF-04-04 $2.84MF-06-06 $3.30MF-06-08 $23.37MF-08-08 $3.83MF-08-10 $5.18MF-10-10 $7.00MF-10-12 $6.30MF-12-12 $13.99MF-12-16 $38.39MF-16-16 $18.25

FS 4000

O-Ring for Face Seal

FS4000-04 $0.11FS4000-06 $0.15FS4000-08 $0.18FS4000-10 $0.21FS4000-12 $0.31FS4000-16 $0.40FS4000-20 $0.58FS4000-24 $0.30

MS

Male SAE 45°

MS-06-06 $4.02MS-12-12 $8.15

FSX

Female SAE 45° Swivel

FSX-04-06 $3.66FSX-06-06 $2.65FSX-12-12 $5.81

FSX45


45° Elbow

FSX45-06-06 $6.06FSX45-12-12 $8.90

FSX90


90° Elbow

FSX90-06-06 $6.61FSX90-12-12 $9.76


Discount


FBSPX

British Parallel Pipe

Female Swivel 60° Cone

FBSPX-04-04 $3.53FBSPX-06-06 $2.97FBSPX-06-08 $3.46FBSPX-08-08 $4.39FBSPX-08-10 $10.34FBSPX-10-10 $7.30FBSPX-12-12 $6.18FBSPX-16-16 $9.17FBSPX-20-20 $28.71

FBSPX45



45° Elbow

FBSPX45-04-04 $8.06FBSPX45-06-06 $9.03FBSPX45-08-08 $10.41FBSPX45-10-10 $17.46FBSPX45-12-12 $15.26FBSPX45-16-16 $23.91FBSPX45-20-20 $56.95

FBSPX90



45° Elbow

FBSPX90-04-04 $10.61FBSPX90-06-06 $9.74FBSPX90-08-08 $10.29FBSPX90-08-10 $25.15FBSPX90-10-10 $11.75FBSPX90-12-12 $25.58FBSPX90-16-16 $20.76

MBSPT

British Standard Pipe

Male 60° Cone

MBSPT-04-04 $2.36MBSPT-06-06 $2.39MBSPT-08-08 $3.64MBSPT-12-12 $4.98MBSPT-16-16 $7.48

MBSPP British Parallel Pipe

Male 60° Cone

MBSPP-04-04 $5.75MBSPP-06-06 $2.93MBSPP-06-08 $21.83MBSPP-08-08 $4.25MBSPP-10-10 $35.17MBSPP-12-12 $11.65MBSPP-16-16 $16.00

FBFPX

British Flat Face Seat

Female Swivel

FBFPX-06-06 $7.01FBFPX-06-08 $8.39FBFPX-08-08 $12.30FBFPX-12-12 $32.99

C61

Code 61 Flange

C61-08-08 $10.98C61-08-12 $11.81C61-12-12 $11.73C61-12-16 $18.61C61-16-16 $14.76C61-16-20 $15.52C61-20-20 $25.11

C6145

Code 61 Flange

45° Elbow

C6145-08-08 $15.85C6145-08-12 $24.67C6145-12-12 $19.96C6145-12-16 $20.34C6145-16-16 $25.18C6145-16-20 $32.14C6145-20-20 $32.19

C6190

Code 61 Flange

90° Elbow

C6190-08-08 $18.51C6190-08-12 $20.02C6190-12-12 $20.14C6190-12-16 $20.37C6190-16-16 $26.62C6190-16-20 $27.93C6190-16-24 $27.19C6190-20-20 $31.70

61SF-KIT

Code 61 Split

Flange Kit

61SF-KIT-08 $5.4161SF-KIT-12 $4.0961SF-KIT-16 $4.4961SF-KIT-20 $5.4861SF-KIT-24 $7.2861SF-KIT-32 $7.9561SF-KIT-40 $14.5261SF-KIT-48 $22.8261SF-KIT-56 $98.0361SF-KIT-64 $115.22


Discount



MENDER

Hose Mender

MENDER-06 $5.32MENDER-08 $5.80

SHELL

Shell Only

SHELL-04 $0.75SHELL-06 $0.92SHELL-08 $1.16SHELL-10 $1.26SHELL-12 $1.71SHELL-16 $1.99

MT

Male Flareless

Compression

MT-04-04 $4.28MT-04-05 $4.90MT-06-05 $4.73MT-06-06 $4.65MT-06-08 $5.20MT-08-08 $6.25MT-08-10 $6.75MT-12-12 $9.95MT-16-16 $14.13

GT

Female Grease Trap

GT-04-08 $5.27GT-06-08 $5.39

KAR

Karcher Pressure Wash

Female Swivel

KAR-04-22 $4.53KAR-06-22 $4.43

FW

Female Weld Fitting

FW-03-04 $3.38FW-04-04 $2.22FW-04-05 $2.75FW-04-06 $2.64FW-06-06 $2.70FW-06-08 $2.54FW-08-08 $3.18FW-08-10 $3.77FW-12-12 $4.22FW-16-16 $12.12

MIX

Male Inverted Flare Swivel

MIX-04-03 $5.04MIX-04-04 $6.01MIX-04-05 $6.05MIX-04-06 $6.51MIX-05-05 $9.31MIX-05-06 $8.02MIX-06-04 $6.08MIX-06-05 $6.64MIX-06-06 $6.41MIX-06-07 $7.01MIX-06-08 $6.51MIX-08-08 $7.51MIX-08-10 $8.12

MIX45


45° Elbow

MIX45-04-03 $6.45MIX45-04-04 $6.06MIX45-04-05 $6.77MIX45-04-06 $6.93MIX45-05-05 $8.99MIX45-05-06 $7.96MIX45-06-04 $6.22MIX45-06-05 $5.43MIX45-06-06 $6.42MIX45-06-07 $7.01MIX45-06-08 $6.31MIX45-08-08 $6.65

MIX90


90° Elbow

MIX90-03-04 $5.72MIX90-04-03 $6.66MIX90-04-04 $6.31MIX90-04-05 $5.47MIX90-04-06 $5.56MIX90-05-05 $9.39MIX90-05-06 $9.45MIX90-06-04 $8.43MIX90-06-05 $5.63MIX90-06-06 $7.12MIX90-06-07 $8.58MIX90-06-08 $8.52MIX90-08-08 $8.63

MW

Stand Tube

North American

MW-04-04 $3.28MW-04-05 $5.39MW-04-06 $3.90MW-06-06 $3.24MW-06-08 $3.70MW-08-08 $4.15MW-08-10 $4.64MW-12-12 $14.00MW-16-16 $13.48

MMSP

Metric Stand Tube

MMSP-04-06 $6.70MMSP-04-08 $6.26MMSP-04-10 $6.28MMSP-05-10 $6.39MMSP-05-12 $6.44MMSP-06-10 $7.25MMSP-06-12 $7.29MMSP-06-14 $7.59MMSP-08-15 $7.47MMSP-08-16 $7.61MMSP-08-18 $7.68MMSP-10-18 $8.48MMSP-10-20 $8.65MMSP-12-20 $8.79MMSP-12-22 $8.94MMSP-12-25 $9.13MMSP-16-25 $11.73MMSP-16-28 $11.93MMSP-16-30 $12.56

Discount



Note: Part numbers for our metric (DIN) hose ends have changed.

MDINLX- 08 - 22

HOSE FITTING (MM)

MDINLX

Male DIN Light

Universal Seat

MDINLX-04-14 $4.62MDINLX-04-16 $7.83MDINLX-06-18 $4.92MDINLX-08-22 $4.71MDINLX-10-26 $4.82MDINLX-12-30 $4.70MDINLX-16-36 $5.64

FDINLXFemale Swivel DIN Light

Universal Seat

FDINLX-04-12 $6.02FDINLX-04-14 $5.69FDINLX-04-16 $6.08FDINLX-06-18 $3.64FDINLX-08-22 $4.18FDINLX-10-26 $5.43FDINLX-12-30 $5.92FDINLX-16-36 $8.21

FDINLX45Female Swivel DIN Light

Universal Seat 45° Elbow

FDINLX45-04-14 $15.10FDINLX45-04-16 $14.49FDINLX45-04-18 $9.78FDINLX45-06-18 $8.90FDINLX45-08-22 $10.29FDINLX45-10-26 $15.62FDINLX45-12-30 $16.86FDINLX45-16-36 $19.90

FDINLX90Female Swivel DIN Light


FDINLX90-04-14 $12.89FDINLX90-04-16 $14.29FDINLX90-04-18 $9.95FDINLX90-06-18 $9.16FDINLX90-08-22 $10.36FDINLX90-10-26 $15.98FDINLX90-12-30 $17.12FDINLX90-16-36 $19.95

MDINHX

Male DIN Heavy

Universal Seat

MDINHX-04-16 $14.59MDINHX-04-18 $5.91MDINHX-06-22 $5.98MDINHX-08-24 $6.05MDINHX-10-30 $6.48MDINHX-12-36 $6.65MDINHX-16-42 $6.75

FDINHXFemale Swivel DIN Heavy

Universal Seat

FDINHX-04-16 $6.34FDINHX-04-18 $6.23FDINHX-06-20 $13.00FDINHX-06-22 $4.15FDINHX-08-24 $4.63FDINHX-10-30 $5.43FDINHX-12-36 $8.07FDINHX-16-42 $36.75

FDINHX45Female Swivel DIN Heavy


FDINHX45-04-18 $9.95FDINHX45-06-22 $10.15FDINHX45-08-24 $11.88FDINHX45-10-30 $14.56FDINHX45-12-36 $17.60FDINHX45-16-42 $20.24

FDINHX90Female Swivel DIN Heavy


FDINHX90-04-18 $10.03FDINHX90-06-22 $15.11FDINHX90-08-24 $15.43FDINHX90-10-30 $14.78FDINHX90-12-36 $22.52FDINHX90-16-42 $37.62

FJISX

Female JIS 30° Swivel

FJISX-04-04 $2.93FJISX-06-06 $3.29FJISX-08-08 $3.49FJISX-10-12 $17.22FJISX-12-12 $8.78FJISX-16-16 $11.74

FKOMX

Komatsu

Female JIS 30° Swivel

FKOMX-04-14 $7.94FKOMX-06-18 $9.16FKOMX-08-22 $9.33FKOMX-10-24 $13.10FKOMX-12-30 $12.68FKOMX-16-33 $18.38FKOMX-20-36 $82.07

Discount


Four-Wire Spiral “W” Hose EndsSteel Crimp Fittings for 4SH and SAE 100R12 Spiral Hose

Note: In sizes -02, -03, -04, -05, -08, and -10, the threads of SAE 37° fl are and SAE 45° fl are are the same. However, the sealing sur-face angles are not the same.

FJX- 12 - 16 W

HOSE FITTING

FJX


FJX-06-06W $5.14FJX-06-08W $4.51FJX-08-08W $6.77FJX-08-10W $7.34FJX-10-10W $6.75FJX-12-10W $6.96FJX-12-12W $7.09FJX-12-14W $13.05FJX-12-16W $14.30FJX-16-12W $18.69FJX-16-16W $13.98FJX-16-20W $20.37FJX-20-20W $26.21FJX-20-24W $58.68FJX-24-24W $30.82FJX-32-32W $68.75

FJXSS


Stainless Steel

FJXSS-12-12W $85.92FJXSS-16-16W $112.90FJXSS-20-20W $213.53FJXSS-24-24W $238.08FJXSS-32-32W $397.61

FJX45


45° Elbow

FJX45-06-06W $14.11FJX45-06-08W $14.84FJX45-08-08W $15.98FJX45-08-10W $16.83FJX45-10-10W $12.13FJX45-12-12W $23.64FJX45-12-16W $28.52FJX45-16-16W $33.04FJX45-16-20W $35.41FJX45-20-20W $49.09FJX45-20-24W $50.85FJX45-24-24W $56.98FJX45-32-32W $88.98

FJX90


90° Elbow

FJX90-06-06W $11.60FJX90-08-08W $12.42FJX90-08-10W $16.73FJX90-12-12W $21.46FJX90-12-16W $28.52FJX90-16-16W $29.98FJX90-16-20W $35.41FJX90-20-20W $44.60FJX90-20-24W $52.61FJX90-24-24W $60.27FJX90-32-32W $92.10

FJX90L


90° Elbow Long

FJX90L-08-08W $10.67FJX90L-08-10W $9.59FJX90L-16-16W $34.71

MJ

Male JIC 37°

MJ-06-06W $4.37MJ-06-08W $5.72MJ-08-08W $5.24MJ-08-10W $7.79MJ-12-12W $9.79MJ-12-16W $10.36MJ-16-16W $16.31MJ-16-20W $18.37MJ-20-20W $19.08MJ-20-24W $44.20MJ-24-24W $30.13MJ-32-32W $68.74

MPMale Pipe (NPT)

MP-06-06W $3.34MP-06-08W $3.81MP-08-08W $4.41MP-10-08W $5.45MP-10-12W $5.72MP-12-12W $5.90MP-12-16W $10.09MP-16-16W $8.90MP-16-20W $17.32MP-20-20W $24.04MP-20-24W $23.95MP-24-24W $27.11MP-32-32W $42.15

MPSSMale Pipe (NPT)

Stainless Steel

MPSS-08-08W $55.02MPSS-12-12W $72.09MPSS-16-16W $87.16MPSS-20-20W $159.73MPSS-24-24W $181.88MPSS-32-32W $306.80

Discount



FFX


FFX-06-06W $6.79FFX-08-08W $7.08FFX-08-10W $7.42FFX-10-10W $9.41FFX-12-12W $10.88FFX-12-16W $16.45FFX-16-16W $13.83FFX-16-20W $34.26FFX-20-20W $34.23FFX-20-24W $69.70FFX-24-24W $49.84

FFX45


45° Elbow

FFX45-06-06W $13.66FFX45-08-08W $13.96FFX45-08-10W $14.78FFX45-10-10W $16.54FFX45-12-12W $19.90FFX45-12-16W $23.35FFX45-16-16W $24.18FFX45-16-20W $39.01FFX45-20-20W $35.65FFX45-20-24W $58.54FFX45-24-24W $57.73

FFX90


90° Elbow

FFX90-06-06W $8.04FFX90-08-08W $8.37FFX90-08-10W $9.21FFX90-10-10W $11.03FFX90-12-12W $21.78FFX90-12-16W $28.69FFX90-16-16W $25.79FFX90-16-20W $43.09FFX90-20-20W $36.93FFX90-20-24W $62.33FFX90-24-24W $69.37

FFX90L


90° Elbow Long

FFX90L-06-06W $11.88FFX90L-08-08W $9.40FFX90L-12-12W $20.06FFX90L-16-16W $42.67FFX90L-20-20W $49.09

FFX90M


90° Elbow Medium

FFX90M-16-16W $19.59

FBSPX



FBSPX-06-06W $3.98FBSPX-08-08W $5.04FBSPX-12-12W $7.60FBSPX-16-16W $9.70FBSPX-20-20W $38.23

FBSPX45



45° Elbow

FBSPX45-06-06W $9.02FBSPX45-08-08W $10.30FBSPX45-12-12W $16.71FBSPX45-16-16W $20.28

FBSPX90



90° Elbow

FBSPX90-06-06W $8.94FBSPX90-08-08W $6.95FBSPX90-12-12W $13.17FBSPX90-16-16W $20.47

MB

Male O-Ring Boss

MB-12-12W $9.79MB-16-16W $12.72MB-16-20W $22.56MB-20-20W $15.66

FW

Female Weld Fitting

FW-12-12W $9.57

GT

Grease Trap Female

GT-06-08-W $10.16

Discount



C61

Code 61 Flange

C61-08-08W $11.56C61-08-12W $23.22C61-12-12W $13.16C61-12-16W $14.21C61-16-16W $18.36C61-16-20W $18.45C61-20-20W $21.12C61-20-24W $25.39C61-24-24W $35.50C61-24-32W $89.60C61-32-32W $51.69

C6122

Code 61 Flange

22° Elbow

C6122-12-12W $21.24C6122-12-16W $21.64C6122-16-16W $26.50C6122-16-20W $22.94C6122-20-20W $36.21C6122-20-24W $34.15C6122-24-24W $48.86C6122-32-32W $73.02

C6130

Code 61 Flange

30° Elbow


C6145

Code 61 Flange

45° Elbow

C6145-08-12W $19.86C6145-12-12W $18.87C6145-12-16W $18.55C6145-16-16W $24.19C6145-16-20W $22.95C6145-20-20W $32.12C6145-20-24W $34.15C6145-24-24W $41.41C6145-24-32W $61.80C6145-32-32W $69.38

C6160

Code 61 Flange

60° Elbow


C6190

Code 61 Flange

90° Elbow


61SF-KIT

Code 61 Split

Flange Kit


Discount



C62Code 62 Flange

C62-12-12W $20.90C62-12-16W $36.50C62-16-16W $26.67C62-20-20W $34.81C62-20-24W $49.60C62-24-24W $42.45C62-32-32W $60.67

C6222Code 62 Flange

22° Elbow

C6222-12-12W $33.13C6222-12-16W $30.63C6222-16-16W $24.66C6222-16-20W $30.94C6222-20-20W $45.90C6222-20-24W $43.24C6222-24-24W $56.04

C6230Code 62 Flange

30° Elbow


C6245Code 62 Flange

45° Elbow

C6245-12-12W $26.16C6245-12-16W $28.12C6245-16-16W $31.55C6245-16-20W $33.88C6245-20-20W $47.32C6245L-20-20W $118.74C6245-20-24W $46.90C6245-24-24W $55.33C6245-32-32W $77.69

C6290Code 62 Flange

90° Elbow


62SF-KITCode 62 Split Flange Kit

62SF-KIT-08 $9.9062SF-KIT-12 $7.3962SF-KIT-16 $9.1962SF-KIT-20 $12.0062SF-KIT-24 $16.4862SF-KIT-32 $28.96

CATCaterpillar Flange

CAT-12-12W $20.12CAT-12-16W $23.84CAT-16-16W $24.12CAT-16-20W $29.14CAT-20-20W $39.34CAT-20-24W $47.40CAT-24-24W $54.40

CAT45Caterpillar Flange

45° Elbow

CAT45-12-12W $29.65CAT45-16-16W $40.09CAT45-20-20W $48.29

CAT90Caterpillar Flange

90° Elbow

CAT90-12-12W $24.70CAT90-16-16W $30.90CAT90-20-20W $40.93CAT90-20-24W $44.74CAT90-24-24W $78.84

CAT Split Flange Half

CAT-12H $10.98CAT-16H $11.89CAT-20H $12.94CAT-24H $16.75CAT-32H $21.95

Discount


Discount


Six-Wire Spiral “JJ” Hose EndsSteel Crimp Fittings for SAE 100R13 Spiral Hose

Hydraulic O-Ring Assortment

A full assortment of O-rings for split fl ange, face seal, and straight thread (ORB) connectors. Everything is contained in handy steel case. Keep one near your sales counter and one in your service area.

DRG24 Hydraulic O-Ring Assortment $154.32

Kit contains 288 O-rings:• Split Flange, twelve of each size -08 thru -32• Straight Thread (ORB), twelve of each size -04 thru -32• Face Seal, twelve of each size -04 thru -24

Note: In sizes -02, -03, -04, -05, -08, and -10, the threads of SAE 37° fl are and SAE 45° fl are are the same. However, the sealing sur-face angles are not the same.

FJX- 12 - 16 JJ

HOSE FITTING

FJXFemale JIC 37° Swivel

FJX-20-20JJ $36.76FJX-24-24JJ $49.95FJX-32-32JJ $80.76

MJMale JIC 37°

MJ-20-20JJ $36.05MJ-24-24JJ $53.13MJ-32-32JJ $90.83

MPMale Pipe (NPT)

MP-20-20JJ $27.08MP-24-24JJ $37.78MP-32-32JJ $63.64

FFX Female Face Seal Swivel

FFX-20-20JJ $33.40FFX-24-24JJ $41.26

C61 Code 61 Flange

C61-20-20JJ $33.63C61-24-24JJ $43.79C61-24-32JJ $51.07C61-32-32JJ $79.63

C62 Code 62 Flange

C62-20-20JJ $40.13C62-24-24JJ $48.11C62-24-32JJ $61.97C62-32-32JJ $96.91

61SF-KIT

Code 61 Split

Flange Kit


62SF-KIT

Code 62 Split Flange Kit

62SF-KIT-08 $9.9062SF-KIT-12 $7.3962SF-KIT-16 $9.1962SF-KIT-20 $12.0062SF-KIT-24 $16.4862SF-KIT-32 $28.96

Discount


3903-540

JIC 37° Female Swivel

Most sizes (except 3/8") are dual seat, will fi t JIC 37° and SAE 45°

Hose JIC Item # SST Pusher* Price

1/8" 3/16" 3903-02543 4599-FP017 $6.951/8" 1/4" 3903-02544 4599-FP010 $4.573/16" 1/4" 3903-03544 4599-FP011 $2.873/16" 5/16" 3903-03545 4599-FP001 $3.541/4" 1/4" 3903-04544 4599-FP012 $2.921/4" 5/16" 3903-04545 4599-FP013 $3.001/4" 3/8" 3903-04546 4599-FP013 $3.125/16" 5/16" 3903-05545 4599-FP013 $3.425/16" 3/8" 3903-05546 4599-FP013 $3.223/8" 3/8" 3903-06546 4599-FP015 $3.533/8" 1/2" 3903-06548 4599-FP005 $3.661/2" 1/2" 3903-08548 4599-FP016 $4.471/2" 5/8 3903-08550 4599-FP006 $4.53

3903-A00

SAE 45° Female Swivel

For all other sizes, use JIC 37° Female Swivel

Hose SAE Item # SST Pusher* Price

3/8" 3/8" 3903-06A06 4599-FP014 $6.88

3903-500

JIC 37° Male


3/16" 1/4" 3903-03504 4599-MP001 $4.541/4" 1/4" 3903-04504 4599-MP002 $4.541/4" 3/8" 3903-04506 4599-MP005 $6.985/16" 3/8" 3903-05506 4599-MP004 $7.653/8" 3/8" 3903-06506 4599-MP005 $5.573/8" 1/2" 3903-06508 4599-MP007 $6.051/2" 1/2" 3903-08508 4599-MP008 $6.051/2" 5/8 3903-08510 4599-MP009 $6.27

3903-600

JIC 37° Female Swivel 45° Elbow


1/4" 1/4" 3903-04604 4599-TP204 $12.115/16" 3/8" 3903-05606 4599-TP206 $13.183/8" 3/8" 3903-06606 4599-TP206 $14.271/2" 1/2" 3903-08608 4599-TP308 $18.11

3903-640



1/8" 1/4" 3903-02644 4599-SP038 $13.413/16" 1/4" 3903-03644 4599-TP204 $13.411/4" 1/4" 3903-04644 4599-TP204 $13.341/4" 5/16" 3903-04645 4599-TP205 $16.191/4" 3/8" 3903-04646 4599-TP206 $15.585/16" 3/8" 3903-05646 4599-TP206 $16.003/8" 3/8" 3903-06646 4599-TP206 $13.823/8" 1/2" 3903-06648 4599-TP208 $16.061/2" 1/2" 3903-08648 4599-TP308 $16.421/2" 5/8 3903-08650 4599-TP310 $21.41

3903-840

JIC 37° Female Swivel 90° Long Drop Elbow


1/4" 1/4" 3903-04844 4599-TP204 $11.235/16" 3/8" 3903-05846 4599-TP206 $16.423/8" 3/8" 3903-06846 4599-TP206 $16.903/8" 1/2" 3903-06848 4599-TP208 $17.061/2" 1/2" 3903-08848 4599-TP308 $18.821/2" 5/8 3903-08850 4599-TP310 $20.58

R7 Thermoplastic Hose EndsCan be crimped or swaged • Use with SAE 100R7 Thermoplastic Hose

Discount


R7 Thermoplastic Hose EndsCan be crimped or swaged • Use with SAE 100R7 Thermoplastic Hose

3903-100

Male Pipe (NPT)

Hose NPT Item # SST Pusher* Price

1/8" 1/8" 3903-02102 4599-MP023 $2.111/8" 1/4" 3903-02104 4599-MP026 $6.853/16" 1/8" 3903-03102 4599-MP001 $2.263/16" 1/4" 3903-03104 4599-MP004 $2.751/4" 1/8" 3903-04102 4599-MP002 $2.351/4" 1/4" 3903-04104 4599-MP004 $2.291/4" 3/8" 3903-04106 4599-MP005 $2.545/16" 1/4" 3903-05104 4599-MP004 $2.665/16" 3/8" 3903-05106 4599-MP005 $3.343/8" 1/4" 3903-06104 4599-MP005 $2.853/8" 3/8" 3903-06106 4599-MP005 $2.663/8" 1/2" 3903-06108 4599-MP009 $3.531/2" 3/8" 3903-08106 4599-MP008 $4.091/2" 1/2" 3903-08108 4599-MP009 $3.29

3903-0140


Hose NPT Item # SST Pusher* Price

1/8" 1/8" 3903-02142 4599-MP027 $9.733/16" 1/4" 3903-03144 4599-MP003 $7.361/4" 1/4" 3903-04144 4599-MP003 $6.535/16" 1/4" 3903-05144 4599-MP003 $8.703/8" 3/8" 3903-06146 4599-MP006 $7.231/2" 1/2" 3903-08148 4599-MP010 $8.74

3903-240

Female Pipe (NPSM) Swivel

Hose NPSM Item # SST Pusher* Price

1/8" 1/4" 3903-02244 4599-FP024 $5.543/16" 1/4" 3903-03244 4599-FP002 $4.771/4" 1/4" 3903-04244 4599-FP002 $5.925/16" 1/4" 3903-05244 4599-FP013 $7.173/8" 3/8" 3903-06246 4599-FP004 $6.271/2" 1/2" 3903-08248 4599-FP018 $7.39

3903-D00

Male O-Ring Boss

Hose ORB Item # SST Pusher* Price

3/16" 1/4" 3903-03D04 4599-MP001 $6.241/4" 1/4" 3903-04D04 4599-MP004 $7.201/4" 5/16" 3903-04D05 4599-MP002 $7.201/4" 3/8" 3903-04D06 4599-MP004 $5.09

3903-400

O-Ring Face Seal Female Swivel

Hose ORS Item # SST Pusher* Price

1/4" 1/4" 3903-04404 4599-MP045 $10.755/16" 3/8" 3903-05406 4599-MP037 $12.963/8" 3/8" 3903-06406 4599-MP037 $12.993/8" 1/2" 3903-06408 4599-MP046 $23.811/2" 1/2" 3903-08408 4599-MP046 $15.26

3903-470

O-Ring Face Seal Female Swivel 90° Elbow

Hose ORS Item # SST Pusher* Price

1/4" 1/4" 3903-04474 4599-TP204 $13.605/16" 3/8" 3903-05476 4599-TP206 $16.223/8" 3/8" 3903-06476 4599-TP206 $13.86

Discount


R4 Suction Hose EndsSteel crimp fi ttings and hose barbs for SAE 100R4 Suction & Return Hose

Ferrule

Item # Hose Price

112-400 ¾" $1.63116-400 1" $1.94120-400 1¼ $2.31124-400 1½" $3.67132-400 2" $5.18

NPT

Male Pipe

Item # Hose MP Price

112-112 ¾" ¾" $2.51112-116 ¾" 1" $4.54116-116 1" 1" $4.25120-120 1¼ 1¼" $8.48124-124 1½" 1½" $12.36132-132 2" 2" $22.99

ORB

O-Ring Boss - Male

Item # Hose MB Price

112-712 ¾" ¾" $4.24116-716 1" 1" $6.94120-720 1¼ 1¼" $11.58

JIC

37° Flare - Female Swivel

Item # Hose FJX Price

112-612 ¾" ¾" $4.05112-614 ¾" ⁄" $6.18112-616 ¾" 1" $6.18116-616 1" 1" $6.18120-620 1¼ 1¼" $13.59124-624 1½" 1½" $19.46132-632 2" 2" $46.12

JIC

37° Flare - Male

Item # Hose MJ Price

112-512 ¾" ¾" $2.90112-514 ¾" ⁄" $4.64112-516 ¾" 1" $5.03116-516 1" 1" $5.53120-520 1¼ 1¼" $10.42

Code 61

Flange

Item # Hose C61 Price

112-G12 ¾" ¾" $13.82116-G16 1" 1" $18.61120-G20 1¼ 1¼" $31.16124-G24 1½" 1½" $35.89132-G32 2" 2" $47.80

Code 61

Flange 45°


124-G54 1½" 1½" $43.74132-G62 2" 2" $63.15140-G62 2½" 2" $90.44

Code 61

Flange 90°


120-G80 1¼ 1¼" $40.83124-G84 1½" 1½" $44.86124-G92 1½" 2" $49.40132-G92 2" 2" $66.33132-G96 2" 2½" $82.17140-G92 2½" 2" $93.87

Discount


HAS

Male Pipe (NPT)

Item # MP Hose Price

HAS-2 1/2" 1/2" $1.44HAS-3 3/4" 3/4" $1.50HAS-4 1" 1" $1.72HAS-5 1¼" 1¼". $2.20HAS-6 1½" 1½" $2.50HAS-8 2" 2" $3.04HAS-10 2½" 2½" $6.56HAS-12 3" 3" $7.80HAS-16 4" 4" $11.52

HRS

Male Pipe (NPT) Reducer


HRS-4x3 1" 3/4" $4.04HRS-5x4 1¼" 1" $5.06HRS-6x5 1½" 1¼" $4.61HRS-8x6 2" 1½" $5.83HRS-10x8 2½" 2" $10.88HRS-12x10 3" 2½" $12.80HRS-16x12 4" 3" $28.10

HES

Male Pipe (NPT) Expander


HES-3x4 3/4" 1" $2.95HES-4x5 1" 1 ¼" $3.72HES-5x6 1 ¼" 1 ½" $3.97HES-6x8 1 ½" 2" $7.20HES-8x10 2" 2 ½" $11.36HES-10x12 2 ½" 3" $13.96HES-12x16 3" 4" $28.10

HAPS

Zinc-Plated Male Pipe (NPT)


HAPS-2 1/2" 1/2" $1.60HAPS-3 3/4" 3/4" $1.66HAPS-4 1" 1" $2.01HAPS-5 1¼" 1¼". $2.40HAPS-6 1½" 1½" $2.79HAPS-8 2" 2" $3.36HAPS-10 2½" 2½" $7.04HAPS-12 3" 3" $8.57HAPS-16 4" 4" $13.12

HCPS

Zinc-Plated Hose Mender

Item # Hose Price

HCPS-38 3/8" $2.53HCPS-2 1/2" 1.41HCPS-3 3/4" 1.64HCPS-4 1" 1.83HCPS-5 1¼" 2.88HCPS-6 1½" 2.85HCPS-8 2" 3.78HCPS-10 2 ½" 6.72HCPS-12 3" 7.68HCPS-16 4" 12.80

CN-100

Male Pipe (NPT) with Clamshell


C12N-112 3/4" 3/4" $10.14C16N-116 1" 1" $11.14C20N-120 1 ¼" 1 ¼" $15.78C24N-124 1 ½" 1 ½" $33.31C32N-132 2" 2" $38.20

3500

Male Pipe (NPT) with Hex


3501 1/4" 1/8" $2.213502 1/4" 1/4" $1.743504 1/4" 3/8" $2.353505 3/8" 1/4" $1.983506 3/8" 3/8" $1.983508 3/8" 1/2" $2.853509 1/2" 1/4" $2.243510 1/2" 3/8" $2.323512 1/2" 1/2" $2.443511 1/2" 3/4" $3.803513 3/4" 1/2" $4.183514 3/4" 3/4" $3.833515 3/4" 1" $7.253516 1" 3/4" $6.853518 1" 1" $5.663519 1 ¼" 1 ¼" $8.53

TBC

T-Bolt Clamp

Stainless steel band, carbon steel bolt

Item # Hose OD Price

Min. Max.TBC131 1.19" 1.44" $4.26TBC150 1.38" 1.56" $2.72TBC175 1.63" 1.81" $2.72TBC188 1.75" 1.94" $2.72TBC200 1.88" 2.06" $2.72TBC225 2.13" 2.31" $2.72TBC238 2.25" 2.44" $2.72TBC250 2.38" 2.56" $2.78TBC256 2.34" 2.63" $2.78TBC263 2.41" 2.69" $2.88TBC275 2.53" 2.81" $2.88TBC288 2.66" 2.94" $2.88TBC300 2.78" 3.06" $2.88TBC312 2.91" 3.19" $2.88TBC325 3.03" 3.31" $2.88TBC350 3.28" 3.56" $3.01TBC375 3.53" 3.81" $3.01TBC400 3.78" 4.06" $3.01TBC425 4.03" 4.31" $3.01

R4 Suction Hose EndsSteel crimp fi ttings and hose barbs for SAE 100R4 Suction & Return Hose

Discount


R1

Use only with SAE 100R1AT Hydraulic Hose

R1-100Male Pipe (NPT)

Item # Hose NPT Price

R1-04-104 1/4" 1/4" $5.61R1-06-104 3/8" 1/4" $6.08R1-06-106 3/8" 3/8" $7.34R1-08-108 1/2" 1/2" $8.75R1-12-112 3/4" 3/4" $13.87R1-16-116 1" 1" $24.87

R1-600


Item # Hose JIC Price

R1-04-604 1/4" 1/4" $6.62R1-06-606 3/8" 3/8" $7.80R1-08-608 1/2" 1/2" $11.24R1-12-612 3/4" 3/4" $18.10R1-16-616 1" 1" $28.80

R1-500

JIC 37° Male


R1-04-504 1/4" 1/4" $10.02R1-06-506 3/8" 3/8" $10.75R1-08-508 1/2" 1/2" $10.80R1-12-512 3/4" 3/4" $16.31R1-16-516 1" 1" $34.66

R2

Use only with SAE 100R2AT Hydraulic Hose



R2-04-102 1/4" 1/8 $6.77R2-04-104 1/4" 1/4" $5.10R2-06-106 3/8" 3/8" $6.67R2-08-106 1/2" 3/8" $8.47R2-08-108 1/2" 1/2" $7.95R2-08-112 1/2" 3/4" $15.82R2-12-112 3/4" 3/4" $12.61R2-16-116 1" 1" $22.61R2-20-120 1¼" 1¼" $32.80R2-24-124 1½" 1½" $83.99

R2-600JIC 37° Female Swivel


R2-04-604 1/4" 1/4" $6.02R2-04-605 1/4" 5/16 $10.46R2-04-606 1/4" 3/8" $7.36R2-06-606 3/8" 3/8" $7.09R2-06-608 3/8" 1/2" $8.45R2-08-608 1/2" 1/2" $10.22R2-08-610 1/2" 5/8" $11.96R2-12-610 3/4" 5/8" $21.18R2-12-612 3/4" 3/4" $16.45R2-12-614 3/4" 7/8 $31.69R2-16-616 1" 1" $26.18R2-20-620 1¼" 1¼" $50.67R2-24-624 1½" 1½" $80.84

316 Stainless Steel


R2-04-604SS 1/4" 1/4" $42.39R2-06-606SS 3/8" 3/8" $49.50R2-08-608SS 1/2" 1/2" $63.06R2-12-612SS 3/4" 3/4" $118.80R2-16-616SS 1" 1" $140.05

R2-680



R2-04-684 1/4" 1/4" $10.94R2-06-686 3/8" 3/8" $14.72R2-08-688 1/2" 1/2" $16.84R2-08-690 1/2" 5/8" $18.59R2-12-692 3/4" 3/4" $28.16R2-16-696 1" 1" $43.81

R2-660



R2-04-664 1/4" 1/4" $12.15R2-06-666 3/8" 3/8" $13.75R2-08-668 1/2" 1/2" $15.61R2-08-670 1/2" 5/8" $17.83R2-12-672 3/4" 3/4" $22.05R2-16-676 1" 1" $35.29

R2-500

JIC 37° Male


R2-04-504 1/4" 1/4" $9.11R2-04-505 1/4" 5/16 $9.20R2-04-506 1/4" 3/8" $12.64R2-06-506 3/8" 3/8" $9.77R2-06-508 3/8" 1/2" $10.57R2-08-508 1/2" 1/2" $9.82R2-08-510 1/2" 5/8" $9.43R2-12-512 3/4" 3/4" $14.83R2-16-516 1" 1" $31.51

Reusable Hose EndsField-attachable hose fi ttings (no crimping required)

Discount


R5

Use only with SAE 100R5 Truck Hose

R5-600



R5-04-604 3/16" 1/4" $2.88R5-05-605 1/4" 5/16" $3.66R5-06-606 5/16" 3/8" $4.10R5-06-608 5/16" 1/2" $8.61R5-08-608 13/32" 1/2" $5.50R5-10-608 1/2" 1/2" $13.10R5-10-610 1/2" 5/8" $7.85R5-12-612 5/8" 3/4" $12.21R5-16-616 7/8" 1" $16.08

R5-680



R5-04-684 3/16" 1/4" $7.71R5-05-685 1/4" 5/16" $9.30R5-06-686 5/16" 3/8" $9.71R5-08-688 13/32" 1/2" $10.10R5-10-690 1/2" 5/8" $14.35

R5-660



R5-04-664 3/16" 1/4" $7.36R5-05-665 1/4" 5/16" $9.82R5-06-666 5/16" 3/8" $10.87R5-08-668 13/32" 1/2" $11.45R5-10-670 1/2" 5/8" $15.45R5-12-672 5/8" 3/4" $21.32R5-16-676 7/8" 1" $32.40

R5-500JIC 37° Male


R5-04-504 3/16" 1/4" $3.83R5-05-505 1/4" 5/16" $6.50R5-06-506 5/16" 3/8" $4.19R5-08-508 13/32" 1/2" $6.10R5-10-510 1/2" 5/8" $7.94R5-12-512 5/8" 3/4" $14.05R5-16-516 7/8" 1" $14.47

R5-100

Male Pipe (NPT)


R5-04-102 3/16" 1/8" $2.09R5-04-104 3/16" 1/4" $2.55R5-05-104 1/4" 1/4" $2.75R5-06-104 5/16" 1/4" $3.02R5-06-106 5/16" 3/8" $3.89R5-08-106 13/32" 3/8" $4.23R5-08-108 13/32" 1/2" $4.81R5-10-108 1/2" 1/2" $6.15R5-10-112 1/2" 3/4" $10.72R5-12-112 5/8" 3/4" $9.86

R5-400


Item # Hose SAE Price

R5-06-406 5/16" 3/8" $4.17R5-12-412 5/8" 3/4" $23.12

R5-480

SAE 45° Female Swivel 45° Elbow


R5-06-486 5/16" 3/8" $9.71R5-12-492 5/8" 3/4" $18.69

R5-460

SAE 45° Female Swivel 90° Elbow


R5-06-466 5/16" 3/8" $10.64

R5-300 SAE 45° Male


R5-04-304 3/16" 1/4" $2.14R5-06-306 5/16" 3/8" $3.05R5-08-308 13/32" 1/2" $3.91R5-12-312 5/8" 3/4" $5.20


Discount


R5 Continued

Use only with SAE 100R5 Truck Hose

R5-B00 Inverted Flare Male Swivel

Item # Hose MIX Price

R5-04-B04 3/16" 1/4" $5.73R5-05-B05 1/4" 5/16" $6.68R5-06-B06 5/16" 3/8" $6.70R5-08-B08 13/32" 1/2" $7.88

R5-E00 Inverted Flare Male Swivel

90° Elbow

Item # Hose MIX Price

R5-04-E04 3/16" 1/4" $7.30R5-05-E05 1/4" 5/16" $7.85R5-06-E06 5/16" 3/8" $8.40

R7

Use only with SAE 100R7 Thermoplastic Hose

R7-600



R7-04-604 1/4" 1/4" $4.08R7-04-605 1/4" 5/16" $4.29R7-04-606 1/4" 3/8" $5.04R7-06-606 3/8" 3/8" $5.36R7-06-608 3/8" 1/2" $5.42R7-08-608 1/2" 1/2" $6.91R7-08-610 1/2" 5/8" $7.22R7-12-612 3/4" 3/4" $15.14R7-16-616 1" 1" $15.69

R7-680



R7-06-686 3/8" 3/8" $5.83

R7-660



R7-04-664 1/4" 1/4" $6.71R7-06-666 3/5" 3/8" $10.45R7-08-668 1/2" 1/2" $11.91

R7-500

JIC 37° Male


R7-04-504 1/4" 1/4" $4.65R7-06-506 3/8" 3/8" $6.44R7-06-508 3/8" 1/2" $6.94R7-08-508 1/2" 1/2" $6.04R7-08-510 1/2" 5/8" $7.70


Item # Hose Pipe Price

R7-04-104 1/4" 1/4" $3.75R7-04-106 1/4" 3/8" $4.34R7-06-106 3/8" 3/8" $4.60R7-08-106 1/2" 3/8" $5.82R7-08-108 1/2" 1/2" $6.38R7-12-112 3/4" 3/4" $7.96R7-16-116 1" 1" $13.32


Discount


R14

Use only with SAE 100R14 Tefl on® (PTFE) Hose

190600JIC 37° Female Swivel

Item # JIC Hose Price

63-190600-4 1/4" 3/16" $6.0563-190600-5 5/16" 1/4" $7.7463-190600-6 3/8" 5/16" $7.7263-190600-8 1/2" 13/32" $10.2563-190600-10 5/8" 1/2" $12.0263-190600-12 3/4" 5/8" $15.5763-190600-16 1" 7/8" $20.53

190773JIC 37° Female Swivel 45°


190773-3S 3/16" 1/8" $15.98190773-4S 1/4" 3/16" $11.23190773-6S 3/8" 5/16" $12.67190773-8S 1/2" 13/32" $13.80190773-10S 5/8" 1/2" $16.36190773-12S 3/4" 5/8" $18.56190773-16S 1" 7/8" $33.64

190772JIC 37° Female Swivel 90° Elbow


190772-3S 3/16" 1/8" $15.64190772-4S 1/4" 3/16" $10.95190772-5S 5/16" 1/4" $11.41190772-6S 3/8" 5/16" $11.52190772-8S 1/2" 13/32" $12.57190772-10S 5/8" 1/2" $16.36190772-12S 3/4" 5/8" $18.56190772-16S 1" 7/8" $33.64

190990SAE 45° Female Swivel

Item # SAE Hose Price

63-190990-4 1/4" 3/16" $6.4263-190990-5 5/16" 1/4" $6.6663-190990-6 3/8" 5/16" $7.1963-190990-8 1/2" 13/32" $8.6063-190990-10 5/8" 1/2" $12.0563-190990-12 3/4" 5/8" $15.33

FC9171SAE 45° Female Swivel 90° Elbow

Item # SAE Hose Price

FC9171-0606S 3/8" 5/16" $11.50FC9171-1212S 3/4" 5/8" $15.33

Note: In sizes -02, -03, -04, -05, -08, and -10, the threads of SAE 37° fl are and SAE 45° fl are are the same. However, the sealing surface angles are not the same.

191074 Compression Ball Sleeve

Item # Tube Hose Price

38-191074-8 1/2" 13/32" $35.8538-191074-10 5/8" 1/2" $12.0538-191074-12 3/4" 5/8" $30.73


Discount



R14 Continued

Use only with SAE 100R14 Tefl on® (PTFE) Hose

190627Male Pipe (NPT)

Item # NPT Hose Price

38-190627-2-4 1/8" 3/16" $5.8338-190627-4-4 1/4" 3/16" $5.7338-190627-4-5 1/4" 1/4" $8.3838-190627-4-6 1/4" 5/16" $6.5838-190627-6-6 3/8" 5/16" $7.8338-190627-6-8 3/8" 13/32" $9.3238-190627-8-10 1/2" 1/2" $9.6438-190627-12-12 3/4" 5/8" $12.0438-190627-16-16 1" 7/8" $18.53

FC9062 Inverted Flare Male Swivel

Item # MI Hose Price

FC9062-0404S 1/4" 3/16" $8.89FC9062-0505S 5/16" 1/4" $9.62FC9062-0606S 3/8" 5/16" $8.31FC9062-0808S 1/2" 13/32" $9.60FC9062-1010S 5/8" 1/2" $11.07FC9062-1212S 3/4" 5/8" $12.16

FC9063 Inverted Flare Male Swivel

45° Elbow


FC9063-0404S 1/4" 3/16" $8.09FC9063-0505S 5/16" 1/4" $9.07FC9063-0606S 3/8" 5/16" $9.72FC9063-0808S 1/2" 13/32" $10.39FC9063-1010S 5/8" 1/2" $12.85FC9063-1212S 3/4" 5/8" $13.07

190950 Inverted Flare Male Swivel

90° Elbow


190950-4S 1/4" 3/16" $16.41190950-5S 5/16" 1/4" $15.17190950-6S 3/8" 5/16" $9.68190950-8S 1/2" 13/32" $17.30190950-10S 5/8" 1/2" $18.35190950-12S 3/4" 5/8" $21.04

900568Replacement Sleeve

Sleeve is good for only one use. Must be re-placed when fi tting is re-used.

Item # Hose ID Price

900568-03B 1/8" $4.50900568-04B 3/16" $6.03900568-05B 1/4" $6.10900568-06B 5/16" $5.95900568-08B 13/32" $6.43900568-10B 1/2" $7.72900568-12B 5/8" $8.56900568-16B 7/8" $11.95

Tefl on® PasteThread Sealant


LCTS14 ¼ pint $9.94LCTS1 ½ pint $14.47LCTS2 1 pint $22.68

Tefl on® Tape

1/2" wide

Meets military specifi cation MIL-T-27730A

TTA50 260" $.60TTB50 520" $.92

Discount


Push-Lock Hose BarbsBrass fi ttings for Push-Lock Low Pressure Hose

271Male Pipe (NPT) Swivel


271-0404 1/4 1/4 $2.28271-0604 3/8 1/4 $2.34271-0606 3/8 3/8 $2.61271-0806 1/2 3/8 $2.84271-0808 1/2 1/2 $3.45271-1212 3/4 3/4 $5.10

272Male Pipe (NPT)


272-0402 1/4 1/8 $.71272-0404 1/4 1/4 $.84272-0406 1/4 3/8 $.72272-0502 5/16 1/8 $.94272-0504 5/16 1/4 $1.09272-0602 3/8 1/8 $.91272-0604 3/8 1/4 $.84272-0606 3/8 3/8 $.99272-0608 3/8 1/2 $1.55272-0612 3/8 3/4 $3.50272-0804 1/2 1/4 $1.22272-0806 1/2 3/8 $1.14272-0808 1/2 1/2 $1.55272-0812 1/2 3/4 $2.67272-1006 5/8 3/8 $2.61272-1008 5/8 1/2 $2.54272-1012 5/8 3/4 $3.27272-1208 3/4 1/2 $2.67272-1212 3/4 3/4 $2.54272-1612 1 3/4 $6.52272-1616 1 1 $7.64

273Male Pipe (NPT) 90°


273-0402 1/4 1/8 $1.57273-0404 1/4 1/4 $1.83273-0604 3/8 1/4 $1.83273-0606 3/8 3/8 $2.36273-0806 1/2 3/8 $2.97273-0808 1/2 1/2 $3.45273-1212 3/4 3/4 $6.40

274Female Pipe (NPT)


274-0402 1/4 1/8 $1.40274-0404 1/4 1/4 $1.07274-0406 1/4 3/8 $2.41274-0502 5/16 1/8 $1.19274-0504 5/16 1/4 $1.32274-0602 3/8 1/8 $1.24274-0604 3/8 1/4 $1.22274-0606 3/8 3/8 $1.50274-0608 3/8 1/2 $1.65274-0804 1/2 1/4 $2.27274-0806 1/2 3/8 $1.70274-0808 1/2 1/2 $1.65274-0812 1/2 3/4 $4.39274-1008 5/8 1/2 $1.88274-1212 3/4 3/4 $3.45

278Female Pipe (NPSM) Swivel

Ballseat Type


278-0402 1/4 1/8 $2.49278-0404 1/4 1/4 $1.43278-0406 1/4 3/8 $2.26278-0604 3/8 1/4 $2.21278-0606 3/8 3/8 $2.72278-0808 1/2 1/2 $3.17278-0812 1/2 3/4 $4.39278-1212 3/4 3/4 $6.14


Gasket Type


280-0402 1/4 1/8 $2.94280-0404 1/4 1/4 $1.95280-0604 3/8 1/4 $2.31280-0606 3/8 3/8 $3.05280-0608 3/8 1/2 $4.26280-0808 1/2 1/2 $3.86280-1212 3/4 3/4 $7.13

296

Hose Mender

Item # Hose Price

296-0404 1/4 $1.07296-0505 5/16 $1.09296-0606 3/8 $1.24296-0808 1/2 $1.62296-1010 5/8 $2.51296-1212 3/4 $3.05

Discount


Push-Lock Hose BarbsBrass fi ttings for Push-Lock Low Pressure Hose

Note: In sizes -02, -03, -04, -05, -08, and -10, the threads of SAE 37° fl are and SAE 45° fl are are the same. However, the sealing surface angles are not the same.

282

SAE 45° Flare Male

Item # Hose Tube Price

282-0407 1/4 1/4 $1.52282-0408 1/4 5/16 $1.24282-0610 3/8 3/4 $1.83282-0812 1/2 1/2 $3.02282-1217 3/4 3/4 $5.96

284

SAE 45° Flare Female Swivel


284-0410 1/4 3/8 $1.85284-0510 5/16 3/8 $1.88284-0610 3/8 3/8 $1.52284-1217 3/4 3/4 $4.44

287

SAE 45° / JIC 37° Flare Female Swivel

(Dual Angle Seat)


287-0407 1/4 1/4 $1.45287-0408 1/4 5/16 $1.55287-0612 3/8 1/2 $2.46287-0812 1/2 1/2 $1.95287-0814 1/2 5/8 $3.30287-1014 5/8 5/8 $3.43

286

JIC 37° Flare Male


286-0407 1/4 1/4 $1.45286-0409 1/4 3/4 $22.78286-0609 3/8 3/8 $2.26286-0812 1/2 1/2 $2.74286-1217 3/4 3/4 $5.61

288

JIC 37° Flare Female Swivel


288-0409 1/4 3/8 $1.83288-0509 5/16 3/8 $2.26288-0609 3/8 3/8 $1.55288-1217 3/4 3/4 $4.04

290

Inverted Flare Male Swivel


290-0406 1/4 3/16 $2.11290-0407 1/4 1/4 $1.62290-0408 1/4 5/16 $1.73290-0508 5/16 5/16 $2.18290-0510 5/16 3/8 $2.79290-0608 3/8 5/16 $1.88290-0610 3/8 3/8 $1.98290-0812 1/2 1/2 $3.27290-1014 5/8 5/8 $4.52

292

Inverted Flare Female


292-0406 1/4 3/16 $1.68292-0407 1/4 1/4 $1.65292-0408 1/4 5/16 $1.60292-0608 3/8 5/16 $2.51292-0610 3/8 3/8 $2.13292-0812 1/2 1/2 $3.35

294

Rigid Tube Shank, North American


294-0403 1/4 3/16 $1.35294-0404 1/4 1/4 $.91294-0405 1/4 5/16 $1.14294-0505 5/16 5/16 $6.90294-0606 3/8 3/8 $1.27294-0808 1/2 1/2 $1.88294-1010 5/8 5/8 $3.33294-1212 3/4 3/4 $3.27

294MRigid Tube Shank, Metric


294M-0406 1/4 6mm $1.40294M-0408 1/4 8mm $1.47294M-0610 3/8 10mm $1.52294M-0612 3/8 12mm $1.52294M-0815 1/2 15mm $2.01294M-1018 5/8 18mm $2.06294M-1222 3/4 22mm $2.94

Discount


102Male Pipe (NPT)


102-0202 1/8 1/8 $.66102-0204 1/8 1/4 $.81102-0302 3/16 1/8 $.53102-0304 3/16 1/4 $.71102-0402 1/4 1/8 $.61102-0404 1/4 1/4 $.53102-0406 1/4 3/8 $.94102-0408 1/4 1/2 $1.70102-0502 5/16 1/8 $.66102-0504 5/16 1/4 $.71102-0506 5/16 3/8 $1.07102-0602 3/8 1/8 $.84102-0604 3/8 1/4 $.52102-0606 3/8 3/8 $.84102-0608 3/8 1/2 $1.42102-0612 3/8 3/4 $2.39102-0804 1/2 1/4 $1.02102-0806 1/2 3/8 $.89102-0808 1/2 1/2 $1.22102-0812 1/2 3/4 $2.11102-1006 5/8 3/8 $1.22102-1008 5/8 1/2 $1.50102-1012 5/8 3/4 $2.21102-1208 3/4 1/2 $1.65102-1212 3/4 3/4 $1.85102-1612 1 3/4 $2.51102-1616 1 1 $4.39102-2012 1-1/4 3/4 $4.19102-2016 1-1/4 1 $4.32

103Male Pipe (NPT) Swivel


103-0404 1/4 1/4 $2.28103-0604 3/8 1/4 $2.36103-0606 3/8 3/8 $2.56103-0806 1/2 3/8 $2.89103-0808 1/2 1/2 $3.66103-1212 3/4 3/4 $4.75

104Female Pipe (NPT)


104-0202 1/8 1/8 $.79104-0204 1/8 1/4 $1.42104-0302 3/16 1/8 $.74104-0304 3/16 1/4 $1.22104-0402 1/8 1/8 $.64104-0404 1/4 1/4 $.84104-0406 1/4 3/8 $1.07104-0502 1/8 1/8 $1.09104-0504 1/4 1/4 $1.22104-0506 3/8 3/8 $1.47104-0602 3/8 1/8 $.94104-0604 3/8 1/4 $.86104-0606 3/8 3/8 $1.19104-0608 3/8 1/2 $1.93104-0804 1/2 1/4 $1.02104-0806 1/2 3/8 $1.52104-0808 1/2 1/2 $1.85104-1212 3/4 3/4 $3.33104-1612 1 3/4 $2.97104-1616 1 1 $5.48



124-0202 1/8 1/8 $.96124-0302 3/16 1/8 $.96124-0304 3/16 1/4 $1.09124-0402 1/4 1/8 $1.04124-0404 1/4 1/4 $.91124-0406 1/4 3/8 $1.24124-0504 5/16 1/4 $1.09124-0506 5/16 3/8 $1.40124-0604 3/8 1/4 $.99124-0606 3/8 3/8 $1.29124-0608 3/8 1/2 $2.01124-0806 1/2 3/8 $1.45124-0808 1/2 1/2 $1.88124-1212 3/4 3/4 $2.87



129-0302 3/16 1/8 $1.35129-0402 1/4 1/8 $1.35129-0404 1/4 1/4 $1.55129-0406 1/4 3/8 $2.18129-0502 5/16 1/8 $1.73129-0504 5/16 1/4 $1.68129-0506 5/16 3/8 $2.51129-0602 3/8 1/8 $1.45129-0604 3/8 1/4 $1.50129-0606 3/8 3/8 $1.93129-0804 1/2 1/4 $1.93129-0806 1/2 3/8 $2.59129-0808 1/2 1/2 $3.07129-1006 5/8 3/8 $3.63129-1008 5//8 1/2 $4.39129-1208 3/4 1/2 $5.99129-1212 3/4 3/4 $7.39129-1612 1 3/4 $8.38129-1616 1 1 $9.87



139-0402 1/4 1/8 $2.84139-0404 1/4 1/4 $2.89139-0602 3/8 1/2 $2.18139-0604 3/8 1/4 $1.93139-0606 3/8 3/8 $3.00139-0804 1/2 1/4 $3.63139-0806 1/2 3/8 $3.00139-0808 1/2 1/2 $4.16

Multibarb Hose EndsBrass hose barbs for low pressure air/water hose

Fasten all hose barbs securely with hose clamps or ferrules (page 41).

Discount


Multibarb Hose EndsBrass hose barbs for low pressure air/water hose

142 SAE 45° Flare Male


142-0307 3/16 1/4 $1.14142-0407 1/4 1/4 $.84142-0410 1/4 3/8 $.91142-0508 5/16 5/16 $1.45142-0610 3/8 3/8 $.91142-0612 3/8 1/2 $1.52142-0812 1/2 1/2 $1.85

143SAE 45° / JIC 37° Dual Angle Seat

Female Swivel


143-0307 3/16 1/4 $1.02143-0407 1/4 1/4 $.99143-0408 1/4 5/16 $1.19143-0508 5/16 5/16 $1.24143-0612 3/8 1/2 $1.80143-0812 1/2 1/2 $1.90143-0814 1/2 5/8 $2.36

144



144-0306 3/16 3/16 $1.04144-0410 1/4 3/8 $1.22144-0510 5/16 3/8 $1.32144-0610 3/8 3/8 $1.32144-0812 1/2 1/2 $2.13

Fasten all hose barbs securely with hose clamps or ferrules (page 41).

145 JIC 37° Female Swivel


145-0609 3/8 3/8 $1.22

172NPSM x NPT Adapter

Item # NPSM NPT Price

172-0202 1/8 1/8 $.41172-0402 1/4 1/8 $.30172-0404 1/4 1/4 $.32172-0604 3/8 1/4 $.49172-0606 3/8 3/8 $.62172-0608 3/8 1/2 $.83172-0806 1/2 3/8 $.56172-0808 1/2 1/2 $.92172-1212 3/4 3/4 $1.11

176Male Pipe (NPT) Union

Item # Pipe Price

176-0202 1/8 $1.09176-0404 1/4 $1.22176-0505 5/16 $1.75176-0606 3/8 $1.90176-0808 1/2 $2.89

177

Hose Mender Elbow

Item # Hose Price

177-0404 1/4 $1.42177-0505 5/16 $1.80177-0606 3/8 $1.83177-0808 1/2 $2.56

178

Hose Mender

Item # Hose Price

178-0202 1/8 $.74178-0303 3/16 $.66178-0404 1/4 $.61178-0505 5/16 $.76178-0606 3/8 $.79178-0808 1/2 $1.12178-1010 5/8 $1.52178-1212 3/4 $1.70178-1616 1 $2.51

179Mender Tee

Item # Hose Price

179-0303 3/16 $1.93179-0404 1/4 $1.83179-0505 5/16 $2.16179-0606 3/8 $2.18179-0808 1/2 $3.17179-1010 5/8 $4.87179-1212 3/4 $6.07

Discount


Brass Ferrule (Air)BFM for medium weight hose

Sold in packages of 50

Item # ID Dies (5111A Crimper) Price

BFM478 0.478 R41 / P41 / P42 $10.00BFM500 0.500 R40 / P40 $13.00BFM525 0.252 R39 / P39 $13.00BFM531 0.531 R39 / P39 $13.50BFM562 0.561 R37 / P38 $14.50BFM593 0.593 R36 / P37 $15.00BFM625 0.625 R35 / P36 $15.50BFM656 0.656 R34 / P35 $16.50BFM687 0.687 R33 / P34 $16.50BFM718 0.718 R31 / P32 $17.50BFM718B 0.718 R31 / P32 $17.00BFM750 0.750 R30 / P31 $17.50BFM750B 0.750 R30 / P31 $17.00BFM781 0.781 R29 / P30 $18.50BFM781B 0.781 R29 / P30 $18.00BFM812 0.812 R28 / P29 $19.00

Brass Ferrule (Air)

BFL for light weight hose



BFL380 0.380 R44 / P45 $6.50BFL400 0.400 R44 / P44 $10.50BFL410 0.410 R43 / P44 $7.00BFL450 0.450 R41 / P42 $7.00BFL500 0.500 R40 / P41 $7.00BFL525 0.525 R39 / P40 $7.00BFL548 0.548 R38 / P39 $7.00BFL564 0.564 R37 / P38 $10.00BFL575 0.575 R37 / P38 $7.00BFL600 0.600 R36 / P37 $8.00BFL625 0.625 R36 / P36 $8.50BFL650 0.650 R34 / P35 $9.00BFL675 0.675 R34 / P34 $9.50BFL725 0.725 R31 / P32 $9.50BFL750 0.750 R30 / P32 $10.00BFL775 0.775 R31 / P31 $17.00

Brass Ferrule (Fluid)

BFMW for medium weight water hose



BF800 0.800 R28 / P29 $7.00BF825 0.825 R27 / P28 $7.25BF850 0.850 R26 / P27 $6.50BFW875 0.875 R25 / P26 $8.25BFW900 0.900 R24 / P25 $8.25BFW975 0.975 R21 / P22 $10.00BFW1025 1.025 R19 / P20 $10.50BFW1175 1.175 R13 / P14 $11.75BFMW1050 1.050 R18 / P19 $15.50BFMW1100 1.100 R16 / P17 $11.75BFMW1150 1.150 R15 / P15 $12.50BFMW1225 1.225 R11 / P12 $15.50BFMW1275 1.275 R9 / P10 $33.25BFMW1400 1.400 R4 / P5 $33.75BFMW1500 1.500 -- / P1 $20.25

1/2" Stainless Steel Band Clamp

Item # Diameter Range Price

B6H .38 – .88" $.38B8H .44 – 1" $.38B10H .56 – 1.06" $.38B12H .56 – 1.25" $.39B16H .69 – 1.5" $.39B20H .75 – 1.75" $.40B24H 1.06 – 2" $.40B28H 1.31 – 2.25" $.41B32H 1.56 – 2.5" $.41B36H 1.81 – 2.75" $.41B40H 2.06 – 3" $.48B44H 2.31 – 3.25" $.52B48H 2.56 – 3.5" $.52B52H 2.81 – 3.75" $.57B56H 3.06 – 4" $.57B60H 3.31 – 4.25" $.59B64H 2.5 – 4.5" $.59B72H 3 – 5" $.63B80H 3.5 – 5.5" $.66B88H 4 – 6" $.73B96H 4.5 – 6.5" $.84B104H 5 – 7" $.84

Hose Clamps and FerrulesUse with Brass Hose Barbs

Discount


Low Pressure Hose CrimpersBrass ferrules only • Not for use with high pressure hose and fi ttings

Hose Crimper

This Hose Crimper provides “big tool” crimping advantages at a fraction of the cost. Rugged, portable and easy to use.

855 Hose CrimperIncludes fi ve dies, from .49" to .71"

$138.00

855A Hose CrimperIncludes fi ve dies, from .447" to .671"

$138.00

Replacement Dies $19.80

Die # Hose OD Die # Hose OD

856-10 .385 – .406" 856-1 .640 – .671"856-7 .447 – .468" 856-5 .690 – .710"856-4 .490 – .520" 856-8 .760 – .781"856-3 .540 – .562" 856-9 .820 – .843"856-2 .590 – .625"

Large Hose Crimper

Crimps 1/2" to 1" ID hoses with larger outside diameters, from 11/16" to 1½". Crimps standard brass or aluminum ferrules. Order separare dies for each hose diameter.

860 Large Hose Crimper $164.00

Dies (sold separately) $24.00

Die # Hose OD Die # Hose OD

861-22 11/16" 861-32 1"861-23 23/32" 861-33 1-1/32"861-24 3/4" 861-34 1-1/16"861-25 25/32" 861-36 1-1/8"861-26 13/16" 861-38 1-3/16"861-27 27/32" 861-40 1-1/4"861-28 7/8" 861-42 1-5/16"861-29 29/32" 861-44 1-3/8"861-30 15/16" 861-46 1-7/16"861-31 32/32" 861-48 1-1/2"

5111A Hose Crimper $690.00

Dies (sold separately)Available in ribbed or plainSee page 36 for size selection.

$112.00

Manually-Operated Brass Ferrule Crimper

Crimps all ferrules shown on previous page. Dies are available with plain or ribbed surface (see ferrules for die selection).

Height (with handle upright): 27"Base: 8" x 3"Weight: 29 pounds

Dies not included.

Discount


R5 Truck Hose Endsfor SAE 100R5 Truck Hose

FJX- 08 - 06 R5

HOSE FITTING

MPMale Pipe (NPT)

MP-04-02 R5 $1.94MP-04-04 R5 $2.48MP-06-04 R5 $2.60MP-06-06 R5 $2.48MP-08-06 R5 $5.15MP-08-08 R5 $5.47MP-16-12 R5 $14.64MP-16-16 R5 $24.96MP-20-20 R5 $25.61MP-24-24 R5 $27.51MP-32-32 R5 $33.53

FJX


FJX-04-04 R5 $2.28FJX-04-05 R5 $5.54FJX-06-04 R5 $3.79FJX-06-05 R5 $3.79FJX-06-06 R5 $2.79FJX-08-06 R5 $5.49FJX-08-08 R5 $5.87FJX-16-12 R5 $13.94FJX-16-16 R5 $15.03FJX-20-20 R5 $18.60FJX-24-24 R5 $37.09FJX-32-32 R5 $54.92

FJX45Female JIC 37° Swivel

45° Elbow

FJX45-04-04 R5 $5.51FJX45-06-06 R5 $4.59FJX45-08-06 R5 $6.90FJX45-08-08 R5 $6.66FJX45-16-16 R5 $21.27

FJX90


90° Elbow

FJX90-04-04 R5 $4.88FJX90-04-06 R5 $4.74FJX90-08-06 R5 $7.75FJX90-08-08 R5 $8.36FJX90-16-16 R5 $22.18

MIXMale Inverted Flare Swivel

MIX-05-03 R5 $6.32MIX-08-08 R5 $8.38

MIX45


45° Elbow

MIX45-08-08 R5 $8.91

MIX90Male Inverted Flare Swivel

90° Elbow

MIX90-08-08 R5 $8.91

Tefl on® Paste


LCTS14 ¼ pt $9.94LCTS1 ½ pt $14.47LCTS2 1 pt $22.68

1/2" Tefl on® Tape

Meets military spec: MIL-T-27730A

TTA50 260" $.60TTB50 520" $.92

Discount


Sleeve


38-300 3/8" $1.0438-301 1/2" $1.89

Nut


38-306 3/8" $1.3638-307 1/2" $1.80

Nut

for Spring Guard


38-312 3/8" $1.3938-313 1/2" $2.28

Nut & Spring Assembly


38-015 3/8" $2.2938-016 1/2" $4.00

Male Connector

Body Only


38-324 3/8" 1/4" $1.8938-325 3/8" 3/8" $1.9638-326 3/8" 1/2" $2.1238-327 1/2" 3/8" $6.9338-328 1/2" 1/2" $3.76

Male Connector


38-333 3/8" 1/4" $5.4038-334 3/8" 3/8" $5.0438-335 3/8" 1/2" $6.2138-336 1/2" 3/8" $7.5638-337 1/2" 1/2" $7.75

Male Connector

with Spring Guard

Item # Hose MIP Price

38-342 3/8" 1/4" $6.5038-343 3/8" 3/8" $6.3938-344 3/8" 1/2" $6.8238-345 1/2" 3/8" $8.4838-346 1/2" 1/2" $8.69

Spring


38-351 3/8" $.7138-352 1/2" $1.46

Union


38-318 3/8" $14.1238-319 1/2" $24.40

Female Connector

Item # Hose ABS Price

38-357 3/8" 3/4-20 $10.7438-358 1/2" 7/8-20 $12.84

Female Connector

with Adapter


38-363 3/8" 1/4" $11.0038-364 1/2" 3/8" $21.14

Adapter

Item # ABS Pipe Price

38-369 3/4-20 1/4" $1.3238-368 3/4-20 3/8" $1.2038-372 3/4-20 1/2" $1.8038-370 7/8-20 3/8" $1.5638-371 7/8-20 1/2" $3.38

Air Brake Hose EndsReusable fi ttings for Air Brake Hose

Discount


R6 General Purpose Hose EndsReusable fi ttings for SAE 100R6 General Purpose Hose

MPMale Pipe (NPT)


183-4084 1/4 1/4 $3.25183-4086 1/4 3/8 $4.63183-5094 5/16 1/4 $4.55183-5096 5/16 3/8 $6.70183-6104 3/8 1/4 $3.70183-6106 3/8 3/8 $3.98183-6018 3/8 1/2 $6.78

FPXFemale Pipe (NPSM) Swivel


185-4084 1/4 1/4 $4.87185-4086 1/4 3/8 $6.21185-5094 5/16 1/4 $6.25185-6104 3/8 1/4 $5.56185-6106 3/8 3/8 $6.78

MPMale Pipe (NPT)


38-800 3/16 1/8 $1.0038-802 1/4 1/8 $.6832-377 1/4 1/4 $.8838-806 5/16 1/8 $.6038-808 5/16 1/4 $1.2038-810 3/8 1/8 $.9932-381 3/8 1/4 $1.1632-382 3/8 3/8 $1.9932-383 1/2 3/8 $1.4432-384 1/2 1/2 $2.0932-182 5/8 3/8 $3.0932-385 5/8 1/2 $2.1432-387 3/4 1/2 $2.2232-388 3/4 3/4 $3.0432-185 1 3/4 $6.71

MPMale Pipe (NPT) 90°


38-860 1/4 1/8 $1.9938-862 5/16 1/8 $1.8038-364 5/16 1/4 $21.1438-866 3/8 1/8 $2.0338-868 3/8 1/4 $1.9332-186 3/8 3/8 $4.6232-187 1/2 3/8 $6.1932-191 1/2 1/2 $8.2432-188 5/8 3/8 $5.6932-189 5/8 1/2 $6.6332-190 3/4 1/2 $7.43

MIXMale Inverted Flare


38-828 5/16 1/4 $1.4938-830 5/16 5/16 $.9832-832 5/16 3/8 $1.9638-834 3/8 5/16 $1.8038-836 3/8 3/8 $2.57

MIXMale Inverted Flare 90°


38-873 5/16 5/16 $6.6538-874 3/8 3/8 $4.25

30R7 Fuel Line Hose EndsHose barbs for SAE 30R7 Fuel Line Hose

Discount


BL-TFS

O-Ring Female Swivel

BL06-06TFS $3.33BL08-08TFS $3.65BL10-10TFS $4.13BL12-12TFS $5.98

BL-TF45 O-Ring Female Swivel 45°

BL06-06TF45T $3.54BL08-08TF45T $4.13BL10-10TF45T $4.96BL12-12TF45T $6.93

BL-TF90 O-Ring Female Swivel 90°

BL06-06TF90T $4.01BL08-08TF90T $4.13BL10-10TF90T $4.96BL12-12TF90T $6.93

BL-TMS O-Ring Male Swivel

BL06-06TMS $4.01BL08-08TMS $4.13BL10-10TMS $4.62BL12-12TMS $6.61

BL-TM45 O-Ring Male Swivel 45°

BL06-06TM45T $3.29BL08-08TM45T $3.52BL10-10TM45T $4.05BL12-12TM45T $5.98

BL-TM90 O-Ring Male Swivel 90°

BL06-06TM90T $3.86BL08-08TM90T $4.05BL10-10TM90T $4.77BL12-12TM90T $13.61

BL-MOR

Insert “O” Ring Male

BL06-06MOR $4.45BL08-08MOR $5.17BL10-10MOR $5.43BL12-12MOR $6.47

BL-MOR45 Insert “O” Ring Male 45°

BL06-06MOR45 $5.09BL08-08MOR45 $5.30BL10-10MOR45 $5.89BL12-12MOR45 $6.93

BL-MOR90 Insert “O” Ring Male 90°

BL06-06MOR90 $5.09BL08-08MOR90 $5.89BL10-10MOR90 $6.78BL12-12MOR90 8.99

BL-RMHose Mender/Splicer

BL06-06RM $3.58BL08-08RM $3.96BL10-10RM $4.09BL12-12RM $4.73

BL-MV Compression Repair

Coupling

BL06-06MV $7.00BL08-08MV $7.78BL10-10MV $9.48BL12-12MV $12.21

ACF AC Ferrule

ACF06 $0.59ACF06 REDUCED $0.59ACF08 $0.76ACF08 REDUCED $0.76

ACF10 $0.81

ACF10 REDUCED $0.81

ACF12 $1.02

ACF12 REDUCED $1.02

BL-BR

Braze On for Beadlock

System

BL06-06BR $3.82BL08-08BR $4.41BL10-10BR $4.45BL12-12BR $5.38

Braze On Service Ports

ACP39 $1.72

ACP350 $1.72

ACP348 $1.72

ACPM12A $2.23

ACP351 $1.72ACP352 $2.23

Beadlock A/C Hose EndsAluminum crimp fi ttings for BH Air Conditioning Hose

Discount


Specifi cations

Our alumunium and brass cam and groove fi ttings are designed to interchange with all product manufactured to Mil-C-27487F.

No standard exists for 1/2" and 8" fi ttings, and generally these sizes do not interchange with other manufacturers.

Body Size

Max. Working Pressure

(Aluminum and Brass)

Max. Working Pressure

(Polyproylene)

1/2" 150 psi 125 psi

3/4" 250 psi 125 psi

1" 250 psi 125 psi

1¼" 250 psi 100 psi

1½" 250 psi 100 psi

2" 250 psi 100 psi

2½" 150 psi 100 psi

3" 125 psi 70 psi

4" 100 psi ?

5" 75 psi n/a

6" 75 psi n/a

8" ? n/a

Pressure ratings with standard seals at 70°F.

Polypropylene cam and groove should not be mixed aluminum fi ttings.

Aluminum and brass couplings ship with Buna-N gaskets.

Polypropylene couplings ship with EPDM gaskets. Polyproylene is not recommended for use with Tefl on® (PTFE) gaskets.

Type AMale Adapter x Female NPT

Aluminum

Size Item # Price

1/2" 50-A-AL $5.043/4" x 1/2" 7550-A-AL $6.403/4" 75-A-AL $5.321" 100-A-AL $6.321¼" 125-A-AL $8.161½" 150-A-AL $8.202" 200-A-AL $9.562½" 250-A-AL $14.763" 300-A-AL $17.044" 400-A-AL $38.605" 500-A-AL $65.166" 600-A-AL $77.168" 800-A-AL $212.08

Brass

Size Item # Price

1/2" 50-A-BR $7.163/4" x 1/2" 7550-A-BR $12.123/4" 75-A-BR $7.881" 100-A-BR $8.601¼" 125-A-BR $14.761½" 150-A-BR $15.242" 200-A-BR $19.522½" 250-A-BR $36.163" 300-A-BR $35.404" 400-A-BR $77.725" 500-A-BR $131.206" 600-A-BR $180.60

Polypropylene

Size Item # Price

3/4" x 1/2" PPA50 $3.803/4" PPA75 $3.801" PPA100 $4.721½" x 1¼" PPA125 $4.321½" PPA150 $4.762" PPA200 $5.603" PPA300 $12.604" PPA400 $20.72

Type BFemale Coupler x Male NPT

Aluminum

Size Item # Price

1/2" 50-B-AL $13.283/4" 75-B-AL $13.281" 100-B-AL $14.241½" 150-B-AL $16.322" 200-B-AL $19.803" 300-B-AL $32.244" 400-B-AL $49.365" 500-B-AL $80.686" 600-B-AL $113.928" 800-B-AL $626.08

Brass

Size Item # Price

1/2" 50-B-BR $17.083/4" 75-B-BR $20.961" 100-B-BR $22.841½" 150-B-BR $31.402" 200-B-BR $37.603" 300-B-BR $67.524" 400-B-BR $98.88

Polypropylene

Size Item # Price

3/4" x 1/2" PPB50 $9.563/4" PPB75 $9.561" PPB100 $10.881½" x 1¼" PPB125 $12.761½" PPB150 $12.602" PPB200 $15.523" PPB300 $26.124" PPB400 $52.48

SAFETY NOTICE

Cam and groove couplings should never be used for compressed air or steam service!

Cam & Groove Hose EndsDiscount


Cam & Groove Hose Ends

Type CFemale Coupler x Hose Shank

Aluminum

Size Item # Price

1/2" 50-C-AL $11.203/4" 75-C-AL $12.721" 100-C-AL $13.201½" 150-C-AL $16.362" 200-C-AL $18.803" 300-C-AL $29.964" 400-C-AL $44.605" 500-C-AL $76.246" 600-C-AL $112.568" 800-C-AL $444.64

Brass

Size Item # Price

1/2" 50-C-BR $19.883/4" 75-C-BR $20.961" 100-C-BR $23.321½" 150-C-BR $31.602" 200-C-BR $38.043" 300-C-BR $65.124" 400-C-BR $99.366" 600-C-BR $323.16

Polypropylene

Size Item # Price

3/4" x 1/2" PPC50 $9.563/4" PPC75 $9.561" PPC100 $10.881¼" PPC125 $12.761½" x 1¼" PPC125-1 $12.761½" PPC150 $12.602" PPC200 $15.523" PPC300 $26.124" PPC400 $52.48

Type DFemale Coupler x Female NPT

Aluminum

Size Item # Price

1/2" 50-D-AL $13.003/4" 75-D-AL $13.401" 100-D-AL $13.561½" 150-D-AL $17.562" 200-D-AL $18.643" 300-D-AL $30.884" 400-D-AL $45.845" 500-D-AL $81.686" 600-D-AL $107.568" 800-D-AL $476.40

Brass

Size Item # Price

1/2" 50-D-BR $19.283/4" 75-D-BR $21.201" 100-D-BR $23.321½" 150-D-BR $31.162" 200-D-BR $36.403" 300-D-BR $64.644" 400-D-BR $105.045" 500-D-BR $199.606" 600-D-BR $259.48

Polypropylene

Size Item # Price

3/4" x 1/2" PPD50 $9.563/4" PPD75 $9.561" PPD100 $10.881½" x 1¼" PPD125 $12.761½" PPD150 $12.602" PPD200 $15.523" PPD300 $26.124" PPD400 $52.48

Type EMale Adapter x Hose Shank

Aluminum

Size Item # Price

1/2" 50-E-AL $7.083/4" x 1/2" 7550-E-AL $6.203/4" 75-E-AL $7.241" 100-E-AL $7.281¼" 125-E-AL $9.481½" 150-E-AL $9.002" 200-E-AL $11.842½" 250-E-AL $17.723" 300-E-AL $20.684" 400-E-AL $41.805" 500-E-AL $67.166" 600-E-AL $81.688" 800-E-AL $340.28

Brass

Size Item # Price

1/2" 50-E-BR $12.403/4" 75-E-BR $12.401" 100-E-BR $15.721¼" 125-E-BR $21.521½" 150-E-BR $21.682" 200-E-BR $27.522½" 250-E-BR $46.603" 300-E-BR $47.084" 400-E-BR $90.326" 600-E-BR $256.64

Polypropylene

Size Item # Price

3/4" x 1/2" PPE50 $4.203/4" PPE75 $4.201" PPE100 $4.921¼" PPE125 $4.921½" x 1¼" PPE125-1 $4.921½" PPE150 $5.442" PPE200 $6.363" PPE300 $15.684" PPE400 $20.72

SAFETY NOTICE


Discount


Type FMale Adapter x Male NPT

Aluminum

Size Item # Price

1/2" 50-F-AL $5.243/4" x 1/2" 7550-F-AL $9.563/4" 75-F-AL $6.401" 100-F-AL $8.121¼" 125-F-AL $9.841½" 150-F-AL $9.922" 200-F-AL $11.922½" 250-F-AL $21.123" 300-F-AL $23.164" 400-F-AL $42.245" 500-F-AL $74.886" 600-F-AL $93.968" 800-F-AL $276.76

Brass

Size Item # Price

1/2" 50-F-BR $9.083/4" x 1/2" 7550-F-BR $15.403/4" 75-F-BR $9.801" 100-F-BR $12.881¼" 125-F-BR $19.281½" 150-F-BR $18.602" 200-F-BR $23.762½" 250-F-BR $45.643" 300-F-BR $52.284" 400-F-BR $82.966" 600-F-BR $232.88

Polypropylene

Size Item # Price

3/4" x 1/2" PPF50 $4.203/4" PPF75 $4.201" PPF100 $4.921½" x 1¼" PPF125 $4.921½" PPF150 $4.922" PPF200 $7.123" PPF300 $15.684" PPF400 $20.72

Type DCDust Cap

Aluminum

Size Item # Price

1/2" 50-DC-AL $11.763/4" 75-DC-AL $13.001" 100-DC-AL $13.201½" 150-DC-AL $16.362" 200-DC-AL $16.683" 300-DC-AL $22.284" 400-DC-AL $31.605" 500-DC-AL $52.686" 600-DC-AL $79.408" 800-DC-AL $326.68

Brass

Size Item # Price

1/2" 50-DC-BR $15.083/4" 75-DC-BR $18.001" 100-DC-BR $23.081½" 150-DC-BR $28.802" 200-DC-BR $30.683" 300-DC-BR $44.524" 400-DC-BR $61.765" 500-DC-BR $152.08

Polypropylene

Size Item # Price

3/4" PPH75 $9.561" PPH100 $10.521½" PPH150 $12.602" PPH200 $15.523" PPH300 $24.684" PPH400 $38.32

Dust caps and plugs are not to be used in pressure applications for safety and environmental reasons.

Type DPDust Plug

Aluminum

Size Item # Price

3/4" 75-DP-AL $6.721" 100-DP-AL $7.481¼" 125-DP-AL $8.881½" 150-DP-AL $9.522" 200-DP-AL $9.762½" 250-DP-AL $13.643" 300-DP-AL $14.324" 400-DP-AL $21.805" 500-DP-AL $39.966" 600-DP-AL $45.648" 800-DP-AL $190.56

Brass

Size Item # Price

1/2" 50-DP-BR $11.883/4" 75-DP-BR $11.881" 100-DP-BR $10.961¼" 125-DP-BR $18.361½" 150-DP-BR $19.042" 200-DP-BR $20.842½" 250-DP-BR $28.523" 300-DP-BR $30.004" 400-DP-BR $50.406" 600-DP-BR $213.84

Polypropylene

Size Item # Price

3/4" PPP75 $3.801" PPP100 $4.721½" PPP150 $4.762" PPP200 $6.163" PPP300 $12.604" PPP400 $16.32

Dust caps and plugs are not to be used in pressure applications for safety and environmental reasons.

SAFETY NOTICE


Cam & Groove Hose EndsDiscount


Nylon Abrasion Sleeve

Flexible nylon sleeve protects hose from abrasion and allows bundling of hose lines. Max. OD of hose ends must allowed for if fi ttings are to be covered.

Item # ID Price1

NGB-0106 .76" $1.00NGB-0121 1.05" $1.17NGB-0128 1.19" $1.18NGB-0201 1.29" $1.30NGB-0218 1.63" $1.58NGB-0226 1.79" $1.70NGB-0310 2.11" $1.86NGB-0402 2.59" $2.51NGB-0418 2.91" $2.66NGB-0526 3.70" $3.83

1 Price listed per foot.

Plastic Protective Coil

Chemical and UV ray resistant plastic coil protects hose from abrasion and external damage.

Item # ID Price1

NFSXG16 .50" $.67NFSXG20 .62" $.91NFSXG25 .75" $1.30NFSXG32 .94" $1.89NFSXG40 1.25" $2.77NFSXG50 1.50" $3.61NFSXG63 1.94" $4.97NFSXG75 2.37" $7.11NFSXG90 2.62" $9.17NFSXG110 3.19" $10.99

1 Per foot. Sold in 66 ft. lengths only (NFSXG110 sold in 33 ft. lengths).

Steel Wire Protective Coil

Rust resistant steel wire protects hose cover from abrasion and accidental damage.

Item # ID Price1

SG-1S .61" $.82SG-12S .67" $.89SG-2S .75" $.83SG-14S .85" $.85SG-3S .91" $.87SG-4S 1.04" $1.25SG-5S 1.18" $2.04SG-6S 1.34" $1.65SG-7S 1.66" $1.97SG-9S 1.87" $2.41SG-82 2.13" $2.31SG-10S 2.38" $3.63SG-11S 2.88" $6.89

1 Per foot. Sold in 20' lengths only.

Hose-Bend Restrictors

Reduces bending stress near the hose fi tting, preventing damage and extending the life of the hose. No adhesive or clamp needed. Designed to work with a variety of hydraulic and pressure-washer hoses.

Item # ID Length Price

HB20 .616" 5¼" $2.75HB40 .668" 5¾" $2.90HB60 .750" 6½" $2.95HB80 .815" 7" $3.10HB100 .871" 7¾" $3.90

Steel Protective Coil

Rust resistant steel coil for use where hose lines are subjected to excessive abrasion, kinking, or accidental damage.

Item # ID Price1

HA-1S .50" $1.69HA-13S .57" $2.07HA-2S .63" $1.97HA-3S .75" $1.97HA-4S .88" $2.17HA-5S 1.03" $2.87HA-14S 1.13" $2.93HA-6S 1.22" $2.76HA-7S 1.47" $3.94HA-9S 1.69" $5.51HA-8S 1.91" $4.81HA-15S 2.00" $8.26HA-10S 2.13" $7.78HA-11S 2.56" $9.94HA-12S 2.75" $12.17

1 Per foot. Sold in 20' lengths only.

Protective Sleeving & AccessoriesDiscount


Hose Strap Steel w/ rubber coating

Provides support for long hose lengths, or to insure proper hose routing where abrasion, moving parts or heat may exist.

Item # ID Price

COV0509 .25" $.95COV0709 .37" $.95COV0809 .44" $.95COV0913 .50" $.95COV1013 .56" $.95COV1113 .63" $.95COV1213 .68" $.95COV1313 .75" $.95COV1413 .81" $.95COV1513 .87" $.95COV1613 .93" $.95COV1713 1.00" $.95COV2017 1.18" $.95COV2117 1.25" $.95COV2317 1.37" $.95COV2517 1.50" $1.60COV2617 1.56" $1.60COV2917 1.75" $1.60COV3117 1.87" $1.70COV3217 1.93" $1.70COV3317 2.00" $1.80COV3417 2.15" $1.90COV3817 2.65" $2.10

Fire Jacket Protective Wrap

Silicone rubber coating over fi berglass (no asbestos) protects hose and tubing from high temperatures or molten splash.• Iron oxide red color• Temp. range: -65° to 500° F• 3" wide

Item # Length Price

4055-3 50 feet $392.00

Fire Tape

Used to seal the ends of fi re sleeve to prevent fraying.• Iron oxide red color• Temp. range: -45° to 3800° F• 1" wide

Item # Length Price

FTH100 12 yards $41.44

Fire Jacket Protective Sleeve

Silicone rubber coating over fi berglass (no asbestos) protects hose and tubing from high temperatures or molten splash.• Iron oxide red color• Temp. range: -65° to 500° F

Each sleeve is 50' in length

Item # Hose Size Price

0610-04 1/4" $149.561010-06 3/8" $155.931310-08 1/2" $186.131610-10 5/8" $210.001910-12 3/4" $237.062210-14 7/8" $280.002510-16 1" $319.763210-20 1-1/4" $362.253810-24 1-1/2" $404.254510-28 1-3/4" $488.255110-32 2" $551.25

Protective Sleeving & Accessories

Oil Absorbent


ABSORB-40 $9.99

Discount


SST Hand Swaging ToolThis portable hand-operated hose machine produces smooth, uniform coupling surfaces, without raised edge or ridges common in other coupling methods. The SST Hand Swaging Tool can be attached to a bench vise or directly to a table with separate mounting bracket. Dies and pushers sold separately.

$249.95

Use only with Thermoplastic

Hose and Fittings.

SST Swaging Tool Dies

4540-302 $52.634540-303 $52.634540-304 $52.634540-305 $52.634540-306 $52.634540-308 $52.63

Female Pushers

4599-FP001 $23.784599-FP002 $23.784599-FP004 $22.184599-FP005 $23.784599-FP006 $23.784599-FP010 $23.784599-FP011 $23.784599-FP012 $23.784599-FP013 $23.784599-FP014 $23.784599-FP015 $23.784599-FP016 $23.784599-FP017 $23.684599-FP018 $26.424599-FP024 $30.71

Male Pushers

4599-MP001 $18.964599-MP002 $18.964599-MP003 $18.964599-MP004 $18.964599-MP005 $18.964599-MP006 $18.964599-MP007 $18.964599-MP008 $18.964599-MP009 $18.964599-MP010 $18.964599-MP023 $18.944599-MP037 $40.024599-MP045 $40.024599-MP046 $40.02

Bent Tube Pushers

4599-TP204 $62.364599-TP205 $62.364599-TP206 $62.364599-TP208 $62.364599-TP308 $82.344599-TP310 $82.34

DT71500

Air Conditioning Hose Crimper

The lightweight hand-held hydraulic press is very portable and ideal for shop and fi eld applications. Kit comes in custom molded and includes a complete set of dies covering hoses -06, -08, -10, -12 and reduced barrier -06, -08, -10, and -12. The dies snap quickly into the press. No pins or screws needed.

$639.80

Use only with Air Conditioning Hose and Fittings

Hose Assembly EquipmentDiscount


D100H $1375.00 Includes a manual pump and

steel carrying case (see above).

D100 Series Dies sold separately.

D100P $1595.00Includes a pneumatic pump and steel carrying case (see above).


D100S $895.00 Requires a 10,000 psi hydraulic

pump (not included).


Portable Power anywhere you need it

The D-100 is the ultimate portable hose assembly tool, allowing you to make perfect, precise crimps anywhere you need to work.

Features

Crimps two-wire hose up to 1" ID with standard dies. Double Angle (DA) dies allow crimping of two-wire hose up to 1¼"ID and four-wire hose up to 1" ID.

Fully adjustable direct-reading metric micrometer allows precise setting of crimp diameters (+/- .1 mm).

Accomodates a wide range of hose and fi tting types. No shims or spacers needed.

Removable pusher and spring-loaded die sets allow easy loading, even with bent tube and special fi ttings.

Three models let you choose between air power, manual power, or an existing hydraulic pump.

The open design provides excellent operator visibility.

The lightweight D100-S weighs only 45 lbs. , and the D100-H and D100-P are 85 lbs. each.

The D100 uses the same dies (sold separately) as the electric-powered D105 Compact Hose Crimper.

Steel carrying case holds the crimper, pump, and a full compliment of dies.



Common features(D165, D205 and D305)

Fully adjustable direct-reading metric micrometer allows precise setting of crimp diameters (+/- .1 mm).

Accomodates a wide range of hose and fi tting types. No shims or spacers needed.

Removable pusher and spring-loaded die sets allow easy loading, even with bent tube and special fi ttings.

Foot pedal keeps both hands free to handle hose.

Adjustable retraction stop limits ram retractions for quick repetitive crimps.

Adjustable coupling stop for accurate, repetitive positioning of the assembly inside the dies.

Electric-powered hydraulic pump included.

Dies sold separately.

D165Compact Hose Crimper, $2250.00

This is our newest crimper, and one we expect to be very popular. The D165 combines the small footprint and effi ciency features of the D105 with a strong 60-ton cylinder, increasing capacity to 1¼" four-wire hose. Dies are sold separately.

Crimps all hydraulic hose up to 1¼" ID four-wire with standard dies. No double angle dies needed.

60 tons max cylinder force.

1 hp, 110V electric pump

Approximately 450 crimps per hour. (1/2" 100R2 AT hose with one piece fi tting)

Overall dimensions: 22" x 12" x 22" high

Weight: 140 lbs.

Hose Assembly Equipment

D165-CABCrimper Cabinet, $199.00

This versatile steel cabinet is pre-drilled for mounting our D165 Hose Crimper (sold separately). There is plenty of storage for dies, hose ends, and more.


Locking doors for security.

Two adjustable shelves.

Discount


D305Super-Duty Hose Crimper (call for pricing)

The D305 has enough power for every crimping task. The horizontal feed allows handling of heavy hoses. The automatic cycle completes the crimp operation and retracts ram when crimp is complete. Press the advance once and the rest is fully automatic. Dies are sold separately.

Crimps two-wire, four-wire, and six-wire hydraulic hoses up to 2" ID.

D305 Series dies (sold separately) interchange with Dayco® NP100 Series dies.

110 tons max. cylinder force.

3 hp, 220V one phase electric pump. 3 hp, 220V three phase pump also available.



Weight: 750 lbs.

D205Heavy-Duty Hose Crimper, $3975.00

The D205 combines the production features of our compact crimpers with the extra crimping power for larger hoses. The open design, vertical feed and standard worklight provide excellent operator visibility. Dies are sold separately.

Crimps hose up to 1½" ID with standard dies. Double Angle (DA) dies facilitate crimping of hose up to 2" ID.


2 hp, 220V electric pump. 1 hp, 110V pump also available.



Weight: 270 lbs.

Hose Assembly Equipment

D-Series Die Sets (Sold separately)

We off er a wide range of standard dies for most hydraulic hose assembly tasks. Two-piece “slide in” die design for easy set-up. Double Angle (DA) Dies extend the capabilities of the D100 Series and D205 Crimpers. See page 57 for standard dies. Custom die sizes available upon request.

Discount


Industrial Cutting PowerThis industrial cut-off saw cuts up 4" ID six-wire hose. The 2 HP single-phase electric motor achieves 3,400 RPM maximum cutting speed, and the abrasive cutting wheel (sold separately) leaves a straight and smooth edge for easy assembly. A built-in work vise holds hose securely for cutting. This saw can also be used to cut metal or masonry. Shipping weight 35 lbs.

Item # Description Price

CS14 Hose Cut-Off Saw $99.70CS14-5B Set of fi ve cutting wheels $29.95

Computer-Controlled Crimping Power!

The fully programmable CC60 Hose Crimper is the most advanced crimper to be featured in our catalog. This is state-of-the-art crimping technology, designed for continuous use in a production environment.

CC60 Features

Crimps hydraulic hose up to 2" ID and industrial hose up to 4" ID.

Crimps in both manual and fully automatic modes.

Foot pedal control (not shown) keeps both hands free to handle hose.

Accepts Custom Crimp® 84S, 99S and 145S dies. Also accepts FinnPower® P20 and P32 dies.


7.5 HP 230V 3-phase pump standard. (440V 3-phase pump also available)



Weight: 579 lbs.

Call our sales consultant for pricing and confi guration.

Optional Die Storage and Machine Stand holds up to 16 dies.

Fully programmable controls give the operator complete and accurate control.



Suggested Dies for D100, D165 and D205 Hose Crimpers

Standard dies sizes are listed below. Custom sizes are available upon request.

Hose Type D100 (All models) D165 D205

1/4" one or two-wire D100-14MM/RED $150 D100-14MM/RED $150 D200-14MM/RED $210

3/8" one or two-wire D100-17MM/ORANGE $150 D100-17MM/ORANGE $150 D200-17MM/ORANGE $210

1/2" one or two-wire D100-20MM/YELLOW $150 D100-20MM/YELLOW $150 D200-20MM/YELLOW $210

1/2" four-wire D100-24MM/GREEN $150 D100-24MM/GREEN $150 D200-24MM/GREEN $210

5/8" one or two-wire D100-24MM/GREEN $150 D100-24MM/GREEN $150 D200-24MM/GREEN $210

3/4" one or two-wire D100-28MM/BLUE $150 D100-28MM/BLUE $150 D200-28MM/BLUE $210

3/4" four-wire D100-32MM/BLACK $150 D100-32MM/BLACK $150 D200-32MM/BLACK $210

1" one or two-wire D100-35MM/PURPLE $150 D100-35MM/PURPLE $150 D200-35MM/PURPLE $210

1" four-wire D100DA-40MM* $295 D100-40MM/BLACK $150 D200-40MM/BLACK $210

1¼" one or two-wire D100DA-44MM* $295 D100-44MM/SILVER $150 D200-44MM/SILVER $210

1¼" four-wire N/A D100-51MM/BLACK $150 D200-51MM/BLACK $210

1½" four-wire N/A N/A D200DA-59MM* $395

2" four-wire N/A N/A D200DA-72MM* $395

* Double Angle (DA) Dies require additional double angle tooling, sold separately.

Dies & Crimp Specifi cations

Braided Hose Ends

SAE 100R1 AT Hydraulic Hose

Hose ID Crimp Diameter

R1-04 1/4" 14.22 mm (.56")R1-06 3/8" 18.80 mm (.74")R1-08 1/2" 21.84 mm (.86")R1-10 5/8" 25.40 mm (1.00")R1-12 3/4" 28.96 mm (1.14")R1-16 1" 36.32 mm (1.43")R1-20 1¼" 46.48 mm (1.83")

SAE 100R2 AT Hydraulic Hose



SAE 100R16 Hydraulic Hose





R17-04 ⁄" 14.48 mm (.57")R17-06 ⁄" 17.53 mm (.69")R17-08 ⁄" 21.08 mm (.83")R17-10 ⁄" 26.87 mm (1.058")R17-12 ⁄" 29.72 mm (1.17")R17-16 1" 36.83 mm (1.45")

HJK 10,000ps Jack Hose


HJK-04 ⁄" 16.10 mm (.634")HJK-06 ⁄" 18.92 mm (.745")

Thermoplastic Hose Ends

SAE 100R7 Thermoplastic Hose


R7-02 ⁄" 9.09 mm (.358")R7-03 ⁄" 12.14 mm (.478")R7-04 ⁄" 14.10 mm (.555")R7-05 ⁄" 16.00 mm (.630")R7-06 ⁄" 17.14 mm (.675")R7-08 ⁄" 20.95 mm (.825")

Four-Wire Spiral “W” Hose Ends



R12-08 ⁄" 25.65 mm (1.01")R12-12 ⁄" 33.53 mm (1.32")R12-16 1" 41.40 mm (1.63")R12-20 1⁄" 51.94 mm (2.045")R12-24 1⁄" 60.32 mm (2.375")R12-32 2" 73.28 mm (2.885")

Discount


Dash SizeNominal

SizePipe Thread

JIC 37° Flare

SAE 45° Flare

O–Ring BossO-Ring

Face Seal

Dash size is most commonly represented in sixteenths of

an inch.

Not the actual thread dimension.

Usually refers to pipe size (ID) or

tubing size (OD).

–02 ⁄" ⁄ – 27 ⁄ – 24 ⁄ – 24 ⁄ – 24 n/a

–03 ⁄" n/a ⁄ – 24 ⁄ – 24 ⁄ – 24 n/a

–04 ⁄" ⁄ – 18 ⁄ – 20 ⁄ – 20 ⁄ – 20 ⁄ – 18

–05 ⁄" n/a ⁄ – 20 ⁄ – 20 ⁄ – 20

–06 ⁄" ⁄ – 18 ⁄ – 18 ⁄ – 18 ⁄ – 18 ⁄ – 16

–07 ⁄" n/a n/a 1 ⁄ – 16 n/a n/a

–08 ⁄" ⁄ – 14 ⁄ – 16 ⁄ – 16 ⁄ – 16 ⁄ – 16

–10 ⁄" n/a ⁄ – 14 ⁄ – 14 ⁄ – 14 1 – 14

–12 ⁄" ⁄ – 14 1 ⁄ – 12 1 ⁄ – 14 1 ⁄ – 12 1⁄ – 12

–14 ⁄" n/a 1 ⁄ – 12 1 ⁄ – 12 1 ⁄ – 12 n/a

–16 1" 1 – 11⁄ 1 ⁄ – 12 1 ⁄ – 12 1 ⁄ – 12 1 ⁄ – 12

–20 1 ⁄" 1 ⁄ – 11 ⁄ 1 ⁄ – 12 n/a 1 ⁄ – 12 1 ⁄ – 12

–24 1 ⁄" 1 ⁄ – 11 ⁄ 1 ⁄ – 12 n/a 1 ⁄ – 12 2 – 12

–32 2" 2 – 11 ⁄ 2 ⁄ – 12 n/a 2 ⁄ – 12 n/a

PIPE THREADS

There are several variations of pipe threads. Thread forms include the Dryseal American Standard Taper Pipe Thread (NPT), the National Pipe Straight Threads for Mechanical Joints (NPSM) and the dryseal American Fuel Internal Straight Pipe Thread (NPSF). Each series is normally identifi ed by the abbreviated letter designation.

The NPT thread is recommended for hydraulic service. This thread series is used on both male and female ends and forms a seal by the interference fi t at the root and crest of the mating threads. The NPT male also has an internal chamfer of 30° which allows it to seal at the seat with female NPSM pipe swivels.

The NPSM is a straight pipe thread and sealing is obtained by the mating of the 30° seats of the male and female ends.

SAE THREADS

37° Flared Fittings (JIC): The JIC (Joint Industry Conference) seals are obtained by the mating of two beveled metal surfaces. The function of the threads is simply to draw these two surfaces together. This style is used particularly in high pressure systems. As illustrated below, both the bevel on the male and the seat in the female are machined to 37°.

45° Flared Fittings (SAE): SAE fl ared fi ttings seal in the same manner as described for JIC, however the mating surfaces are machined at 45°. These couplings are usually used for low pressure applications such as refrigerant and fuel lines in conjunction with copper tubing which fl ares easily to 45°.

Straight Thread O-Ring Boss: The O-ring Boss fi tting is a modifi cation of the male JIC where the beveled 37° nose has been removed and a groove has been machined between the threads and the hex in which an O-ring is seated. The female is a port which has been tapped to the proper straight thread size and chamfered at the port face to provide an O-ring seat. The seal is made when the O-ring is trapped between port chamfer, thread under-cut, and the male.

O-Ring Face Seal (OFS): The O-ring Face Seal uses an O-ring (SAE J515) in a groove on the male face side. This is mated to fl at face with an O-ring on the female swivel side, forming a seal without metal deformation much the same as an SAE four bolt split fl ange connection without the bolts. The O-ring face seal connection has been tested to SAE J343 tests and procedures and meets or exceeds SAE J1453 specifi cations. This connector has proven its superiority in leak resistance, ease of installation, high operating pressure, increased torque tolerance and reusability with its ability to be connected and disconnected frequently.

Thread Identifi cationNorth American Ports and Connectors

Discount


hydraulic hose & hose ends and fittings.pdffor ninety days after the date of purchase, discount...

Documents