hydraulic cylinders - bimba manufacturing · lightweight hydraulic cylinder designed specifically...

1.126All product is sold F.O.B. shipping point. Prices are subject to change without notice.

MAGNET (prefix M)Example: HM-096-DZ• 4" stroke or greater required• Overall length increases by 0.25"• 1-1/16" Bore• 1-1/2" Bore • 2" Bore FLUOROELASTOMER SEALS (V)• Specify for compatibility• 1-1/16" Bore • 1-1/2" Bore • 2" Bore

OPTIONS continued...

Enter Stroke Length as 3rd Digit

The Bimba “500” is a precision built, compact,lightweight hydraulic cylinder designed specifically forhydraulic use only, at pressures up to 500 psi.

• Rated 500 PSI Hydraulic (non-shock), Double Acting

EXTRA EXTENSION (EE), PER INCH OF EXTENSION:• 1-1/16" Bore• 1-1/2" Bore• 2" BorePORTS ROTATED 90 DEGREES (K) (no charge)

OPTIONS:

Hydraulic CylindersHEX-STUD® madefrom heat treatedalloy steel. In caseof failure due tooverload, thehexagon portionwill remain in rodand can be easilyremoved

Sintered bronzepiston rod guidebushing

“O” ring “O” ring

Sintered bronzepivot bushing

Buna N rod wiperseal assures drydrip free pistonrod

Block V sealwith backup washer

Piston rod –hard chromeplated

Filled PTFEbearing

Buna N hydraulic service sealswith back up washers

Piston rod pilotedinto piston –threaded andriveted

High strengthaluminum alloyendcaps & piston

TIE-BANDS reinforceboth ends of type 304stainless steel bodyrolled in a groove onthe periphery of eachend cap doublingjoint strength

LeatherBack-uprings

1.127 For Technical Assistance: 800-442-4622

Standard AirCylinders

Three-PositionCylinders

CushionCylinders

MRS®

CylindersNon-Rotating

CylindersPC

CylindersAll Stainless

Non-RepairableAll StainlessRepairable

Z Line AirCylinders

Rod LockCylinders

500 HydraulicCylinders

RepairableHole PunchCylinders

All product is sold F.O.B. shipping point. Prices are subject to change without notice.

“500” Hydraulic Cylinders

MODEL/PRICE DESCRIPTION/WEIGHT (lbs.) DIMENSIONS

H-17 -DBZFront Block MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke – 12"Base Weight: 1.00Adder Per Inch of Stroke: .10


H-09 -DBZFront Block MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke – 12"Base Weight: .57Adder Per Inch of Stroke: .06

H-09 -DUZ Universal Mount – Double End or Rear PivotStandard Stroke Lengths: 1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke – 32"Optional Accessories:D-8316 Mounting BracketD-8322-A Pivot BracketD-8309-A ClevisBase Weight: .50Adder Per Inch of Stroke: .06

H-09 -DZ Nose MountStandard Stroke Lengths: 1", 2", 3", 4", 5", 6", 7"Maximum Stroke – 12"Optional Accessory:D-8316 Mounting BracketBase Weight: .43Adder Per Inch of Stroke: .06

1-1/2" Bore “500” Hydraulic CylindersPush Force = 1.77 x psi · Pull Force = 1.57 x psi

1-1/16" Bore “500” Hydraulic CylindersPush Force = .886 x psi · Pull Force = .776 x psi




H-17 -DUZ Universal Mount – Double End or Rear PivotStandard Stroke Lengths: 1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke – 32"Optional Accessories:D-8318 Mounting BracketD-8324-A Pivot BracketD-8311-A ClevisBase Weight: .95Adder Per Inch of Stroke: .10

H-17 -DZ Nose MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke – 12"Optional Accessory:D-8318 Mounting BracketBase Weight: .84Adder Per Inch of Stroke: .10


H-31 -DBZFront Block MountStandard Stroke Lengths:1", 2", 3", 4", 5", 6"Maximum Stroke – 12"Base Weight: 1.90Adder Per Inch of Stroke: .24

H-31 -DUZ Universal Mount – Double End or Rear PivotStandard Stroke Lengths: 1", 2", 3", 4", 5", 6", 7", 8", 9", 10",11", 12"Maximum Stroke – 32"Optional Accessories:D-8319 Mounting BracketD-8325-A Pivot BracketD-8313-A ClevisBase Weight: 1.75Adder Per Inch of Stroke: .24

1-1/2" Bore “500” Hydraulic Cylinders (continued)

Push Force = 1.77 x psi · Pull Force = 1.57 x psi

2" Bore “500” Hydraulic CylindersPush Force = 3.14 x psi · Pull Force = 2.83 x psi




CushionCylinders

MRS®


CylindersPC



Z Line AirCylinders

Rod LockCylinders






H-31 -DZNose MountStandard Stroke Lengths: 1", 2", 3", 4", 5", 6"Maximum Stroke – 12"Optional Accessory:D-8319 Mounting BracketBase Weight: 1.63Adder Per Inch of Stroke: .24

Bore “500” Hydraulic Cylinders (continued)

Push Force = 3.14 x psi · Pull Force = 2.83 x psi

“500” Hydraulic Cylinder Accessories

D-8316

Mounting Bracket

1-1/16" Bore Accessories

D-8309-A

Rod Clevis

D-8322-A

Pivot Bracket

D-2545

Mounting Nut


“500” Hydraulic Cylinder Accessories continued

D-8318

Mounting Bracket

1-1/2" Bore Accessories

D-8311-A

Rod Clevis

D-8324-A

Pivot Bracket

D-8484

Mounting Nut

D-8319

Mounting Bracket

2" Bore Accessories

D-8313-A

Rod Clevis

D-8325-A

Pivot Bracket

D-508

Mounting Nut




CushionCylinders

MRS®


CylindersPC



Z Line AirCylinders

Rod LockCylinders




“500” Hydraulic Cylinder Accessories continued

Hex-Stud

1-1/16" BoreD-6583

1-1/2" BoreD-6636

2" BoreD-6637

hydraulic cylinders - bimba manufacturing · lightweight hydraulic cylinder designed specifically...

Documents