For more information or to place an order call 1-800-461-5581 or visit napoleonheatingandcooling.com

Hybrid SeriesHMF 100 Wood / Electric Combination Fuel Furnace

Unit shown with optional Napoleon® Diffusion Plenum (Model HMFK-DP)

All specifications and designs can change without notice to allow for on-going product improvement. Images may not be exactly as shown. Consult your owners manual for current information. Check all local and national building codes and gas regulations. Napoleon® is a registered trademark of Wolf Steel Ltd.

• 24 Napoleon Road, Barrie, Ontario, Canada L4M 0G8• 103 Miller Drive, Crittenden, Kentucky, USA 41030• 7200 Trans Canada Highway, Montreal, Quebec, Canada H4T 1A3

Authorized Dealer

Printed in Canada11/2011

Tel: 705-721-1212 Fax: 705-722-6031napoleonheatingandcooling.com

High efficiency, high quality and state-of-the-art engineering are the key elements behind our Napoleon® Hybrid Series furnaces. The HMF100 is designed as a wood burning ‘stand alone’ furnace but with an optional electric heating module.

Convenience is maximized with an automatic control with thermostat, providing a long burn time up to 8 hours. The high temperature refractory lined firebox creates kiln like temperatures for maximum efficiency and lower emmissions. Four stainless steel secondary air tubes mix the precise amount of air, super heating and burning off the flue gasses completing the combustion process and optimizing efficiency. This allows for an extraordinary clean burn and less trips to the wood pile.

Hybrid SeriesHMF 100 Wood / Electric Combination Fuel Furnace

Napoleon® Exclusive Features• Firebox capable of handling 18” long wood• Heats up to 1800 sq. ft.• Glass door with air wash system comes standard• Certified to EPA standards at 3.6 g/hr• 1.9 cubic foot firebox capacity• Average output of 40,000 BTU/hr• Optional 10KW Electrical Furnace Module• Switches automatically from primary wood burn to electric module• Cleaner combustion promoted by 4 separate stainless steel secondary air tubes• Three flexible return air configurations• Can be configured as wood only furnace or wood/electric combination furnace• Filter rack and filter included• 6” Clearance to combustibles for furnace back and sides• Convenient leveling legs are standard• Integrated thermostatic air control and manual air control lever make for fully adjustable burn rates from low to high setting or anywhere in between.

Hybrid Series Specifications Hybrid 100

Maximum input capacity (wood) 76,000 BTU’s

Maximum output capacity (wood) 65,000 BTU’s

Average output capacity (wood) 40,000 BTU’s

220V Electric furnace module (optional) 10KW, 30,000BTU’s

Efficiency (wood) 86%

EPA Emissions (wood) 3.6 grams per hour

Blower 4 Speed- 500-700 CFM

Flue Diameter 6”

Type of chimney

High Temperature Chimney certified to 2100 F for wood burning appliances, listed to UL 103HT (USA) and ULC S629 (Canada)

Maximum log length 18”

Loading capacity 1.9 cu.ft

Furnace dimensions (complete with blower)

29” W x 29” D x 45” H

Clearance 6” back/sides

Firebox dimensions 25 7/8” W x 14” D x 22” H

Firebox front opening 17 1/8” W x 9 1/2” H

Hot air plenum dimensions 22” W x 7 1/2” D

Cold air plenum dimensions 14” W x 9 1/2” H

CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS: UL 391-2010, CSA-B366.1-11, UL1995-2005/CSA C22.2 NO.236-05

HMF100 Image shown right and

on front cover