hx550 multiservice pdh tdm multiplexer dacs (en) · pdf fileline code ami or hdb3 connector...

TDM SDH & PDH DACS

Features

• SDH ADM (Add and Drop Multi-

plexer) and TM (Terminal Multi-

plexer) up to 4 STM1/4 with full

VC11/VC12/VC4 cross connect

• PDH DACS (Digital Access Cross-

connect System) with full DS0

non blocking cross-connect with

up to 252E1 or 336T1

• Up to 64E1 or 36E1 tributaries

ports

• Full modular system:

- 2 slots controller CPU with SDH

and DS0 cross-connect and 2

STM1/4 slots each controler,

- 2 slots power supplies ,

- 4 mini slots

- 12 for 5U or 3 slots for 3U

• Redundant CPU, power, E1 with

hot swappable cards.

SDH Protection for

STM1/STM4 or OC3/OC12:

• MSP 1+1 with one or 2 CPU

• SNCP with one CPU

• SNCP and MSP (1+1) with 2 CPU

E1/T1 Protection:

• 1+1 with adjacent card

• PDH ULSR E1 ring

• PDH SNCP 64K ring

• Circuit protection

with external Y-Box

Redundancy :

• Dual CPU & cross-connect

• Dual power supply

Administration :

• Craft interface, Ethernet port and

in-band over TDM DS0.and SDH

EOC

• Over VT100 menu in Telnet or

SSH,

• In SNMP with CXRview GUI or the

NMS with full automatic commis-

sioning CXR-iNMS

HX9550R HIGH DENSITY

SDH AND DACS MULTIPLEXER

ACCESS SDH& PDH MUX CROSS CONNECT

HX9550R-3U

The HX9550 SDH/SONET/PDH is a Multi-Service Access Platform with:

• High density TDM/PDH multiplexer DACS supporting voice, async and sync data,

industrial copper and optical interfaces, G.SHDSL extension, dry contact and

Ethernet EoPDH bridges/router interfaces

• An economical STM-1/4 (OC-3/12) access ADH ADM/TM multiplexer with full

cross-connect with SDH link and local TDM/PDH interfaces

• TDMoE encapsulation and L2 GE switch card to transport TDM PseudoWire cir-

cuits over GE WAN together with local LAN

This equipment is a combined equipment of the QX3440 DACS with same features

and interfaces but in addition a large cross-connect DS0/E1/T1 to 4 STM1 or STM4

interfaces.

The HX9550R series is particularly designed for the utilities (power companies, oil

and gaz ), transportation , chemical industries to concentrate and to distribute mix

flow of analogue/voice , low rate async / sync, contacts … interfaces and Ethernet

over STM1/4 optical link..

HX9550R-5U

ORDERING INFORMATION

Chassis and cards Description Notes

HX9550R-5U 5U 19’’ Main unit chassis without CPU, power, E1/T1 card, 128 Mbps tributaries Deliver with rack mount 19’’ and 23’’

HX9550R-3U 3U 19’’ Main unit chassis without CPU, power, E1/T1 card, 72 Mbps tributaries Deliver with rack mount 19’’ and 23’’

HX9550R-CPU-CC4-E1 CPU card with SDH VC4/VC12/VC11 and DS0 cross-connect, 2 slots for STM1/

STM1 (OC3/OC12) SFP

Single controller card support MSP 1+1 or SNCP ring

Dual controller cards support single SNCP ring and MSP 1+1

2 for redundancy

HX9550R-SW-4E1-RING E1 ring software 4E1 or 4FOM Software Option

HX9550R-E1 1 channel E1 interface, G703/G704/CAS

Mini slot

4 Mini

slots

available

HX9550R-T1 1 channel T1 interface, G703/G704/CAS

HX9550R-MQE1-aa 4 channel E1 interface, G703/G704/CAS connector DB25, support ULSR-RING aa=75 delivered with cable 75ohms 8 BNC aa=120 with

cable 120 RJ45M

HX9550R-4E1FO-MM 4E1 Optical fiber interface, G703/G704/CAS/NonCAS, support ULSR-RING Multi-Mode 2 km

HX9550R-4E1FO-SMxx 4E1 Optical fiber interface, G703/G704/CAS/NonCAS, support ULSR-RING Single Mode 20, 50, 100, 120 km

HX9550R-RTA Bridge/Router interface: 2 Ethernet ,64 WAN, maxi throughput 4Mbps 2 x 10/100BaseT

HX9550-QFXO 4-channel FXO plug in module, w/600/900 impedance, Battery Reverse

HX9550-QFXS 4-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR

HX9550-2QEM-xx 4 channel 2W E&M plug in module

HX9550-4QEM-xx 4 channel 4W E&M plug in module

HX9550R-4E1-aa 4 channel E1 interface, G703/G704/CAS (support ULSR-RING with option) aa= 75ohms (2 BNC) or 120ohms (RJ45)

1 slot

Module

12

slots

available

HX9550R-3E1-aa 3 channel E1 interface, G703/G704/CAS support PDH-SNCP 64Kbps -RING aa= 75ohms (2 BNC) or 120ohms (RJ45)

HX9550R-4T1 4 channel T1 interface, , G703/G704/CAS

HX9550R-8G703-64K 8 channel G703 interface at 64K data rate (J64)

HX9550R-4GSH 4 channel GSHDSL modem 2 wires Remote modem MD42xx/MD44xx SH33xx and

CopperLAN in 2 wire HX9550R-2GSH 2 channel GHDSL modem 2 or 4 wires

HX9550R-8E&M 8 channel 2W/4W E&M plug in module

HX9550R-12FXS 12-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR Without Ground start and metering pulse.

HX9550R-12FXO 12-channel FXO plug in module, w/600/900 impedance, Battery Reverse

HX9550R-12FXS-M 12-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR With metering pulse.

HX9550R-12FXO-M 12-channel FXO plug in module, w/600/900 impedance, Battery Reverse

HX9550R-SW8RT Bridge/Router with switch 8 ports 10/100BaseT switch ,64 WAN Maxi throughput 8Mbps

HX9550R-TOR-8I8O 8 channels Input and 8 channels output of Dry Relay contact

HX9550R-8RS232-A 8 RS232 RJ45F Interface asynchronous HX9550R

HX9550R-8RS232-A4S 8 RS232 (2 RJ45+ 2 DB44F) asynchronous and 4 synchronous for HX9550R Include 2 cables DB44M to 2 DB25F+ 1DB9F

HX9550R-8RS485 8 RS485/RS422 RJ45 asynchronous over sync oversampling

HX9550-8RS485-TS-BUS 8 RS232/RS422/RS485 asynchronous (200-300-600-1.2k-2.4-4.8-9.6-38,4-57,6-

115,2-128k) per oversampling DCE., Terminal server and Omnibus function.

HX9550R-BR-8RS232-RJ Bridge card with 8 RS232 RJ45F Interface asynchronous HX9550R

HX9550R-TDMoE 4 E1 TDMoIP/CESoE/SAToPSN, 2 WAN Combo GE, 2 LAN GE, clock 10-7 For transport of payload. Support G.823 Traffic

HX9550R-TDMoE-S 4 E1 TDMoIP/CESoE/SAToPSN, 2 WAN Combo GE, 2 LAN GE, clock 16 x 10-9 For transport of payload and synchronization.

Support G.823 Traffic and Synchronization

HX9550R-6X21-DB25 6-channel X21/V11, n 64k, w/ DB15 adaptor

2 slots

Module

HX9550R-6V36-DB25 6-channel V36/RS422/RS485/X21-V11/V36, n 64k, w/ DB25 connector

HX9550R-24MAG-xx 24-channel Magneto plug in xx = 1G = L1 GND; 12 = L1 L2

HX9550R-24FXS 24-channel FXS plug in module, w/600/900 impedance, Battery Reverse, PLAR, w/

o Ground start and metering pulse.

Telco 50 points

HX9550R-24FXO 24-channel FXO plug in module, w/600/900 impedance, Battery Reverse, w/o

Ground start and metering pulse.

HX9550R-PW150 Power supply module -36 to -72V 150 Watt for HX9550R only Order 2 single DC for Dual DC application

HX9550R-PW150-24 Power supply module -12 to -36V 150 Watt for HX9550R only * no support FXS

HX9550R-S-PW48 Power supply module -36 to -72V 100 Watt for HX9550R-S only Order 2 single DC for Dual DC application

HX9550R-S-PWAC Power supply module AC 110/230V 150 Watt for HX9550R-S only Only ONE AC power supply

HX9550R-FAN 2 fan chassis 1 U Power supplied by QX chassis

999-355-031 V.35 DB25 to M34F DTE Cable

999-355-030 V.35 DB25 to M34M DCE Cable

PW-230AC-48-150-xx Power supply 230Vca to -48Vcc 150W Xx= Eur/UK/USA

PROTEC-4E1 1 for 1 protection Y-Box with RJ48C connectors (4E1)

PROTEC-16E1 1 for 1 protection Y-Box with RJ48C connectors (16E1)

Configuration > 2 STM-1/4 (OC-3/12) aggregate lines per CC4 card > 4 STM-1/4 (OC-3/12) with 2 CC4 per chassis > Use STP-STM1/4-MM or SMxx or CWDM or DWDM with DDM

SDH capabilities: > Per chassis single STM-1/4 (OC-3/12) optical ring uplinks > One MSP (1+1) or SNCP for single controllers > Two MSP(1+1) or one MSP (1+1) and SNCP for dual controllers > Aggregate lines that are software configurable > SDH Cross-connect VC11/VC12/VC4 > Non-blocking cross-connect DS0= n 64 Kbps for 252E1 + 64E1 or 336T1 + 52T1 to for data and voice channel transmission for uplink site

System Clock > SSM and CLK hold over function (SDH/SONET and E1/T1) > Clock Source Internal clock, 4 aggregate lines clocks (STM-1/4 (OC-3/12)) > External clocks: 2.048MHz or 2.048Mbps for STM-1/4, 1.544M bps for OC-3/12

SDH/SONET Line Alarm SDH Line PI-LOS RS-LOF RS-TIM MS-SD MS-SF MS-AIS MS-RDI MS-REI B1-BIP B2-BIP SDH Ho-Path AU-LOP AU-AIS HP-SD HP-SF HP-UNEQ HP-PLM HP-TIM HP-RED-P HP-RDI-S HP-RDI-C HP-LOM HP-REI SDH Lo-Path TU-LOP TU-AIS LP-SD LP-SF LP-UNEQ LP-PLM LP-TIM LP-RDI-P LP-RDI-S LP-RDI-C LP-REI LP-BIP SONET Line LOS-PI, LOF-S, TIM-S, SD-L , SF-L ,AIS-L , RDI-L , REI-L UAS, B1-BIP, B2-BIP SONET STS-Path LOP-P, AIS-P, SD-P, SF-P, UNEQ-P, PLM-P, TIM-P, RDI-P-P, RDI-S-P, RDI-C-P, RDI-P-P, LOM-P, REI-P, B3-BIP-P SONET VT-Path LOP-V, AIS-V, SD-V, SF-V, UNEQ-V, PLM-V, TIM-V, RDI-P-V, RDI-S-V, RDI-C-V, REI-V, BIP-V Contains up to 300 alarm records of latest alarm types, alarm severity, date, and time.

HX9550R SDH SPECIFICATION

STM-1/4 or OC-3/12

STM-1/4 or OC-3/12

64E1 or 52T1 drops in

maximum

64E1 or 52T1 drops in

maximum 64E1 or 52T1 drops in

maximum

HX9550-A HX9550-A HX9550-A

STM-1/4 or OC-3/12

STM-1/4 or OC-3/12

MSP 1+1

MSP 1+1

Network Line Interface - E1, MQE1, 4E1 and 3E1 card

E1, MQE1, 4E1 & 3E1 cards support 1+1 protection

4E1, MQE1 and FO 4E1 cards support PDH ULSR protection

3E1 and future FO-3E1 support PDH SNCP 64K protection.

Network Line Interface - T1 and 4T1

Fiber Optical Interface

Line Rate 2.048 Mbps ± 50 ppm Framing ITU G.704

Line Code AMI or HDB3 Connector BNC/RJ48C

Input Signal ITU G.703 to -10dB Electrical 75 ohm Coax/120 ohm twisted pair

Output Signal ITU G.703 Jitter ITU G.823

Line Rate 1.544 Mbps ± 50 bps Output Signal DSX1

Line Code AMI or B8ZS Framing D4/ESF (selectable)

Input Signal ABAM cable length up to 655 feet Connector RJ48C

4 E1 or 4 T1

Source

Wavelength

Power

Receiver Sensivity

Data Rate

Status report

Management

System gain

Line code

Detector type

Fiber type

Connector

G703, G704, CAS or Non CAS

LED or MLM Laser

Multimode 1310

Singlemode 1310 +/- 50 nm; 1550 +/- 40 nm

-26 or –8 dBm

-38 dBm at BER < 10 –10

8 Mbps (4*2Mbps)

Card type, loopback, LOS

Remote management via EOC channel

30 dB

Scrambled NRZ

PIN-FET

SC/PC or FC/PC

Protection PDH ULSR optical ring

HX9550R E1, 3 AND 4 E1/T1 CARD SPECIFICATIONS

HX9550R-4E1FO-MM 4 E1 Fibre Optic dual fibre MM 1310 13dBm for 2km, mini slot , SC/PC

HX9550R-4E1FO-SM30-SC 4 E1 Fibre Optic dual fibre SM 1310 20dBm for 30km, mini slot , SC/PC

HX9550R-4E1FO-SM50-SC 4 E1 Fibre Optic dual fibre SM 1310 30dBm for 50km, mini slot , SC/PC

HX9550R-4E1FO-SM30-FC 4 E1 Fibre Optic dual fibre SM 1310 20dBm for 30km, mini slot, FC/PC

HX9550R-4E1FO-SM20/15 4 E1 Fibre Optic dual fibre SM 1550 12dBm for 20km, mini slot , SC/PC

HX9550R-4E1FO-SM100 4 E1 Fibre Optic dual fibre SM 1550 40dBm for 100km, mini slot ,SC/PC

HX9550R-4E1FO-SM30W13 4 E1 Fibre Optic single fibre SM 1310 WDM 20dBm for 30km, mini slot, please use face to a HX9550R-4E1FO-SM30-W15, SC/PC

HX9550R-4E1FO-SM30W15 4 E1 Fibre Optic single fibre SM 1550 WDM 20dBm for 30km, mini slot , please use face to a HX9550R-4E1FO-SM30-W15, SC/PC

Co-directional Interface

Interface ITU G.703 64 Kbps co-directional interface

Connector 120ohm, RJ48

Line Distance Up to 500 meters

Loopack DTE Payload Loopback, Local Loopback

C37.94 Interface

Source LED

Wavelength 820nm 2Km reach

Connector ST/PC

Optical Budget 50 µ core/9.6 db; 62.5 µ core/ 15db

G.SHDSL Line Interface

> Up to twelve 4-port G.SHDSL cards. > Up to six cards with line power option, as the line power cards use two plug-in slots. > Full duplex with adaptive echo cancellation GSHDSL line coding. > Unconditioned 19-26 AWG twisted pair. > Line rate: 272, 400, 528, 784, 1168, 1552, 2064 for data rates n x 64 Kbps. Compatible with CopperLAN, MD42xx and SH3312 in 2 wire mode and SH3314 in 4 wire mode

DTE Interface (V.35)

DTE Interface (V.36)

DTE Interface (X21)

DTE Interface (RS232-X.50 mux.), 8 ports card asynchronous HX9550R-8RS232-A

> Data Port Up to twelve 8-ports RS232 cards with X.50 plug-in, subrate, with subrate mux

> Modes Asynchronous, Asynchronous in Mux X50 mode, Sync Oversampling

> Connector 8 RJ45

DTE Interface (RS232-X.50 mux.), 8 ports card: 8 asynchronous and 4 synchronous HX9550R-8RS232-A4S

> Data Port Up to twelve 8-ports RS232 cards with X.50 plug-in, subrate, with subrate mux

> Connector 2 RJ45 + 2 DB44F with 2 cable DB44M to 2 DB25F and 1 DB9F

DTE Interface RS485/RS422, 8 ports card asynchronous HX9550R-8RS485

> Data Port Up to twelve 8-asynchronoud ports RS485/RS232/RS422 cards

> Connector 8 RJ45

DTE Interface RS485/RS422, 8 ports card asynchronous HX9550R-8RS485-TS-BUS

> Data Port Up to twelve 8-asynchronoud ports RS485/RS232/RS422 cards

> Connector 8 RJ45

> Asynchrous mode (200-300-600-1.2k-2.4-4.8-9.6-38,4-57,6-115,2-128k) par oversampling DCE en RJ45 pour HX9550,

> Terminal server founction

> Omnibus, supports DNP3 and Modbus protocols

DTE Interface (Data Bridge Card) 8 ports RS232 asynchronous Multipoint

> Data Port Up to twelve 8-port data bridge card (each card supports up to 120 DS0 for data bridge)

> Feature 20 end points per multi-drop circuit to into a logical ended 56K or 64K channel

Per port supports bridge function to N remote Trib. Site (N=1~20)

> Data Rate Asynchronous, supports 1200 to 19200 bps asynchronous data via oversampling channel

Bridge function one port with one DS-0 to many (Maximum is 20 for remote Tributary data box )

20 drops for each DS0 to remote Tributary data box and 8 ports RS232 shared the 128 channels.

Dry Contact interface card: 2 versions HX9550R-TOR-8I-8O and HX9550R-TOR-8I-8O-HV

Dry Contact Outputs 8 pairs per card with screw

Insulation resistance 100M ohms.

Support Normal Closed/Open,

Max Current 5A, maxi voltage 100Vdc or 250Vac (HX9550R-TOR-8I-8O version)

Max Current 2A, maxi voltage 220Vdc or 250Vac (HX9550R-TOR-8I-8O-HV version)

Dry Contact mode: IP-Mode Collect data and send alarm to console ou TRAP to SNMP/CXRview over CPU

IP-Mode Received order from console or SNMP/CXRview over CPU

TDM-Mode transmit dry contact change over E1. Use 1 TS for 1 port or 4 contacts

Dry Contact Inputs 8 pairs per card : 2 port of 4 pairs , 2 RJ45

Internal resistance: Standard version 1K and -HV version 100K

3mA for current activation, 1,5mA for current deactivation, maxi 4mA

> Data Port Up to six 6-port DTE V.35 cards or 1 port

> Data Rate n x 64 Kbps

> Connector DB25F (optional conversion cable DB25S to M34 connector)

> Data Port Up to six 6-port DTE V36 cards or 1 port > Data Rate n x 64 Kbps, support asynchronous with over sampling > Connector DB25F (optional conversion cable DB25S to M34 connector)

> Data Port Up to six 6-port DTE X21/V11 cards or 1 port > Data Rate n x 64 Kbps

> Connector DB15F

HX9550R SERIAL INTERFACES - PRODUCT SPECIFICATIONS

HX9550R VOICE INTERFACES - PRODUCT SPECIFICATIONS

Voice Card (8 E&M and 4&M for HX9550RS only)

Voice Card (12 FXS, 12 FXO, 24 FXS, 24 FXO, QFXS, QFXO)

Connector RJ11, Telco50 for 24 ports

Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF

Encoding A-law or µ-law, user selectable together for all

Impedance Balanced 600 or 900 ohms (selectable together for all)

Longitudinal Rejection 55 dB

Longitudinal Max 2.5 volts peak AC

Loss Adjustment 7 to -16 dB / 0.5 step transmit & receive

Signal/ Distortion > 46dB with 1004 Hz, 0dBm input

Frequency Response - 0.25 to -1 dB from 300 to 3400 Hz

FXS Loop Feed Nominal - 48Vdc with 10mA current limit

FXO Ringing REN 0.1B (AC)

FXS Ringing 1REN at 5K meters per port

16.5Hz, 20Hz, 25Hz, 50Hz, user selectable for all

86 v rms (sine wave), 2 sec on 4 sec off, or 1 sec on 2 sec off optional for PLAR

Signaling Metering pulse 12KHz, 16KHz, Metering level 0dBm, -24dBm

Signaling Bit Programable

All in-band signaling tones are carried transparently by the digitizing process. All in-band signaling tones are carried transparently

by the digitizing process.

Customer is responsible for in-band signaling compatibility between a telephone and a switch, or between a PBX and a switch.

Connector RJ45 connector

Alarm Conditioning CGA busy after 2.5 seconds of LOS, LOF

Encoding A-law or µ-law, user selectable together for all

Impedance Balanced 600 or 900 ohms

Longitudinal Rejection 55 dB

Longitudinal Max 2.5 volts peak AC

Loss Adjustment 0, 3, 6, or 9 dB transmit & receive

Gain Adjustment 7 to -16 dB transmit & receive

Signal/Distortion > 46dB with 1004 Hz, 0dBm input

Frequency Response - 0.25 to -1 dB from 300 to 3400 Hz

Signaling Type 1, Type 2, Type 3, Type 4, and Type 5, A side and B side

All in-band signaling tones are carried transparently by the digitizing process.

Customer is responsible for in-band signaling compatibility between a telephone and a switch, or between a PBX and a switch.

E&M Signaling bits

NOTE: * = Don't care.

E&M

M - Tx E - Rx

A B C D A B C D

Normal IDLE - ON HOOK 0 0 0 1 0 0 * *

ACTIVE - OFF HOOK 1 1 0 1 1 1 * *

A-Bit Invert IDLE - ON HOOK 1 1 0 1 1 1 * *

ACTIVE - OFF HOOK 0 0 0 1 0 0 * *

Signaling bits FXS/FXO

NOTE 1: * = Don’t care.

NOTE 2: INVERT means the 0

&1 of the A-Bit are inverted.

FXS FXO

Tx Rx Tx Rx

PLAR OFF/ON PLAR OFF PLAR ON

A B C D A B C D A B C D A B C D A B C D

Normal ON HOOK 0 1 0 1 0 * * *

OFF HOOK 1 1 0 1 1 1 * *

A-Bit Invert ON HOOK 1 1 0 1 1 * * *

OFF HOOK 0 1 0 1 0 1 * *

Normal NO RING * 1 * * 0 * * * 0 1 1 *

RING 0 0 * * 1 1 * * 0 0 1 *

A-Bit Invert NO RING * 1 * * 1 * * * 0 1 1 *

RING 0 0 * * 0 1 * * 0 0 1 *

Normal Battery * * * 0 * * * 0 * * * 0

Reverse Battery * * * 1 * * * 1 * * * 1

HX9550R ROUTER/BRIDGE, TS AND TDMOE CARDS

Number of ports 2 LAN ports, 64 WAN from 1 to 32 IT

Interface 2 * 10/100BaseT

Connector 2 RJ45

Function One Bridge and Router

Routing Protocol Static, RIP-I, RIP-II, OSPF

VLAN Transparent au VLAN or Tagging or VLAN mapping per IT

Protocols TCP/IP, PPP, MLPPP, HDLC,HDLC Cisco, Frame Relay

Rates per WAN n* 64K channelized over E1/T1 up to 2Mbps

Up to 4Mbps in MLPPP

Function Server et Relay DHCP, QoS

Protocol Rapid Spanning Tree Protocoles 802.1w

Security NAT, NAPT, Firewall

Management Over the HX9550R or IN-Band over 1 TS or over Ethernet

Router/Bridge (1 mini slot)

Router/Bridge with 8ports Swich (1 slot)

Number de ports 8 ports LAN, 64 WAN de 1 à 32 IT

Interface 8 * 10/100BaseT

Connector 8 RJ45

Function One bridge, Router, Switch

Routing Protocol Static, RIP-I, RIP-II, OSPF

VLAN Transparent au VLAN or Tagging or Mapping the VLAN per IT

Protocol TCP/IP, PPP, MLPPP, HDLC,HDLC Cisco, Frame Relay

Rates per WAN n* 64K channelized over E1/T1 up to 2Mbps

Up to 8Mbps in MLPPP

Function Server et Relay DHCP, QoS

Protocol Rapid Spanning Tree Protocoles 802.1w

Security NAT, NAPT, Firewall

Management over HX9550R ou In-Band over 1 TS or over Ethernet

Terminal Server Interface(1 mini slot)

Connector One DB-44 conversion cable to one DB-9 and two DB-25 connectors

Ports One Async RS232 port, two Async/Sync RS232 ports.

The two Async/Sync ports can be configured independently

Data Rate Async: 1.2kbps, 2.4kbps, 4.8kbps, 9.6kbps, 19.2kbps, 38.4kbps

Sync: 64 kbps

Layer 2 Protocol of RS232 Async raw data

Layer 2 Protocol of RS232 Sync PPP

Terminal Server Function Supports Telnet

Router Function RIP-I, RIP-II, Static Route

TDMoE PseudoWire emulation(1 slot) Please read the dedicate documentation

WAN 2 Combo Gigabit Ethernet(GbE) Interface

LAN 2 RJ45 10/100/1000 BaseT port

PseudoWire Mode CESoPSN, SAToP and AAL1 (TDMoPSN)

256 bundle with protection, mini 1 TS maxi 2Mbps

TDM capacity 4 E1 of backplane card.

Packet Delay Variation: Unframed T1 up to 340 ms, Framed T1: Up to 256 ms

E1:up to 256 ms, Framed T1 with CAS: Up to 192 ms

Packet transparency support for all types of packet types including IEEE 802.1q VLAN and 802.1ad (Q-in-Q)

Physical /Electrical

Clock Source Internal, E1/T1 Line, SSM modes, External E1 or T1 depending on CPU model, no SSM on external.

Alarm Relay Alarm Relay, Fuse alarm, and performance alarm, maxi current 1A at 24Vdc and 0.625A at 48Vdc

System Configuration Parameters Active Configuration, Stored Configuration, and Default Configuration (Stored in Non-volatile Memory)

Supervisor RS232, VT100 - front panel

10/100 Base-T, Ethernet on CPU front panel

In-band 64 Kbps in HDLC/PPP

Telnet, SSH v2, SNMP v1 and v3

Performance Monitor

Diagnostics Test Line

Certifications

Compliance ITU G.703, G.704, G.706, G.732, G.736, G.823, G.826, G.711, G.712,

G.775, O.151, V.11, V.28, V.54

IETF SNMP v.3 (RFC2571~2575)

Dimensions HX9550R-5U is 5U 19’’ 432 x 223 x 220 mm (W x H x D)

HX9550R-3U is a 3U 19’’ 438 x 132 x 224 mm (W x H x D)

Power HX9550R-5U Single or Dual -48V DC (-36 to –72V) , 150 Watts max.

Single or Dual –24V DC (-12 to –36V) , 150 Watts max. Mix not permitted

Single or Dual –150V DC 150 Watts max. Mix not permitted

HX9550R-3U Single or Dual -48V DC (-36 to –72V) 100 Watts max

Single 110/230V AC 150 Watts max

Weight HX9550R-5U : 7kg HX9550R-3U : 5kg (Chassis only)

Temperature -5 to 55°C

Humidity 0-95%RH (non-condensing)

Mounting Desk-top stackable, 19” /23” rack mountable

Line Power Supply (For G.SHDSL card only) Available only with DC power.

(For G.SHDSL card only) 60 mA constant current source, selectable peak voltage of 190 Vdc

Performance Registers Last 24 hours performance in 15 minutes interval and last 7 days in 24 hours summary

Separate Registers 12 MDSL ports, network, user, and remote site

Performance Reports Reports include MDSL port unsync Date & Time, Errored Second, Unavailable Second,

E1 Bursty Errored Second, Severe Errored Second, Degraded Minutes, and Controlled Slip Second. Also

available in Statistics (%).

Alarm Queue Containing 40 alarm records which record the latest alarm type, location, and date & time

Threshold Bursty Seconds, Severely Errored Second, Degraded Minutes

Loopback E1/T1 interface (Line Loopback, Payload Loopback, Local Loopback)

GSHDSL interface (Payload Loopback, Local loopback)

Test Pattern E1/T1 interface (215-1 PRBS, 3-in-24, 1-in-8, 2-in-8, 1:1 patterns)

GSHDSL/DTE interface (211-1 BERT)

HX9550R-5U EN55022 Class A, EN50024, FCC Part 15 Class A, FCC Part 68, CS-03, IEC60950, UL60950, IEC

61850-3, IEEE 1613

IEC 61850-3 and IEEE1613: with -48Vdc(150W) power module , w/o Magneto card

HX9550R-3U EN55022 Class A, EN50024, EN300 386, FCC Part 15 Class A, FCC Part 68, CS-03, IEC60950-1,

EN60950-1

IEC 61850-3 and IEEE1613: with -48Vdc(150W) power module , w/o Magneto card

HX9550R SYSTEM - PRODUCT SPECIFICATIONS

HX9550R-5U HX9550R-3U

SDH Number of SFP 4 STM1 or STM4 4 STM1 or STM4

Nb of SNCP ring 1 1

Multiplexer Cross-Connect E1 252 E1 +64E1 252 E1 +36E1

Nb long slots 12 5

Nb mini slots 4 4

Max E1 tributaries 64 36

Max T1 tributaries 52 24

APPLICATION & PROTECTION 1+1

PDH-ULSR RING PROTECTION

PDH ULSR Ring protection for E1 or n x E1

This protection is working with framed E1 and will protect a full E1 or several E1 in parallel and in Ring infrastructure.

This mode of protection is supported by the 4E1, MQE1 and Fiber-optic QE1 card only but only with HX9550R equipment, even E1

can be forward over any E1 PDH/SDH equipment over a clear channel transmission.

The transmission is Unidirectional, then the Working path is using the one direction of the E1 ring pipe and the Protection path will

use the reverse direction or the codirectional pair of the E1 pipe when the ring will be cut.

TS can be dropped and inserted at any node of the ring to create several “point to point connection” of x TS. The E1 ULSR ring can

transport maximum 31 “point to point links” over the ring.

The switching of the protection is based on LOF, LOS , AIS or the bad quality signal.

A ULSR ring with QX3440/HX9550R can support several E1 rings protection, but each HX9550R of this ring can also support

other rings with other HX9550R independently.

CAPABILITIES

• Use one E1 with protection in co-directional path

• Up to 16 E1 ring per chassis

• Use 4E1, mini 4 E1 and mini 4 E1 over fiber

• Recovery time of full traffic <250ms

• Recommended number of nodes per ring 15

• Drop insert of voice, data, Ethernet over PDH traffic

APPLICATION ILLUSTRATION PDH SNCP-64K PROTECTION

PDH SCNP protection for TS (64K) or n x TS

This protection mode is working with framed signal and will protect independently one TS (64kbps)

or n TS. This SNCP protection is based on Ring infrastructure.

This protection is supported by the 3E1 and a future Fiber-optic 3E1 cards only.

This mode of protection can work with QX3440, HX9500R and HX9550R, but the E1 links can be

forwarded over any PDH or SDH equipment in clear channel transmission.

The PDH SNCP protection can be set with Unidirectional or Bidirectional transmission.

The Working traffic and Protection traffic are always transmitted together over an E1 working path

and an E1 protection path.

In case of interruption of the Working path the concerned HX9550R will generate AIS-TS in each

protected TS, to order the switch on both end of the SNCP pipe.

This protection is very efficient and is avoiding the loss of data.

The HX9550R can support many TS ring protection between the same HX9550R or with other

HX9550R toward different directions by using sometime the same E1 for some section of the rings.

CXR Anderson Jacobson

Rue de l'Ornette

28410 Abondant - France

T +33 (0) 237 62 87 90

F +33 (0) 237 62 88 01

email: [email protected]

Smart Solutions for Smart Networks

www.cxr.com

hx550 multiservice pdh tdm multiplexer dacs (en) · pdf fileline code ami or hdb3 connector...

Documents