hvac buyers’ guide - marks supply · 2020-04-25 · gibson – condensing units marks supply •...

MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAU-KEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOOD-MAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTI-NENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH

MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAU-KEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH MAYTAG • GIBSON • NORDYNE • SUMMIT • COMFORTAIRE • DEFLECT-O • IMPERIAL • CONTINENTAL • ADP • HONEYWELL • WHITE-RODGERS • FANTECH • CGF • PANASONIC • GENETRON • GOODMAN • AMI • S&P • MILWAUKEE • YELLOW JACKET • MALCO • TURBO TORCH




HVAC BUYERS’ GUIDE

SPRING & SUMMER 2014

http://www.markssupply.net/


http://www.hrai.ca/

markssupply.net • Marks Supply • HVAC Product Buyers Guide

Table of Contents

markssupply.net •

Gibson Condensing Units

GIBSON JS4BD-KA/KB SERIES - 13 SEER .................. 4GIBSON JS6BD-K(A) SERIES - 13 SEER....................... 5GIBSON JS4BE SERIES - 14 SEER ............................... 6GIBSON JS6BF SERIES - 16 SEER ............................... 7

4CWHD31 • 450 in2 • WALL HANGING UNIT ................ 23CHD46 • 1,193 in2 ....................................................... 23BCDV36CF • 615 in2 ................................................... 23CLHD45 • 736 in2 ......................................................... 23CHD4 • 1,000 in2 • SPECIAL ORDER UNIT ................. 23

Continental Gas Fireplaces 23

HONEYWELL THERMOSTATS ................................28-29WHITE-RODGERS THERMOSTATS ............................. 29

Controls 28

DEFLECT-O .................................................................. 15IMPERIAL ..................................................................... 15

Ducting & Venting, Grilles & Diffusers 15GOODMAN ROOFTOP UNITS ..................................... 30BOOM TRUCK SERVICE.............................................. 30G90 & PVC GALVANIZED/STAINLESS/SATIN .............. 30AMI FIRE DAMPERS/LOUVERS .................................. 31S&P PRODUCTS .......................................................... 31

Commercial HVAC 30

XXMILWAUKEE TOOLS ...............................................32-35YELLOW JACKET ........................................................ 36UEI ................................................................................ 37MALCO ......................................................................... 38TURBO TORCH ............................................................ 39

Installation Items & Tools 32

Marks Supply Locations & Contacts (Back Page)

NORDYNE C-7 INDOOR COILS..................................... 8SUMMIT & NORDYNE COILS ........................................ 9COIL UNIT MATCH-UPS FOR GIBSON UNITS ........... 10COIL UNIT MATCH-UPS FOR MAYTAG UNITS ........... 11

Nordyne/Maytag Coil Units 8

COMFORT-AIRE “DV” SERIES MINI-SPLIT ................. 12COMFORT-AIRE “V” VMH SERIES MINI-SPLIT ........... 13COMFORT-AIRE INVERTER HEAT PUMP .................... 14

ComfortAire Mini-Splits/Heat Pump 12

GIBSON KG7S (C & L SERIES) FURNACE .............16-17GIBSON KG7S (D & M SERIES) FURNACE ............18-19GIBSON KG7T (C & L SERIES) FURNACE..............20-21

Gibson Furnaces 16

CONTINENTAL C96 SERIES ........................................ 22CONTINENTAL C97 SERIES ........................................ 22

Continental Furnaces 22

Maytag Dealerships 3

FANTECH ..................................................................... 24PANASONIC EXHAUSTS ............................................. 25HONEYWELL HUMIDIFERS ......................................... 26MEDIA FILTERS ............................................................ 26CGF PRODUCTS.......................................................... 26GENETRON REFRIGERANTS ...................................... 27

IAQ/Refrigerants 24

2

HVAC Product Buyers Guide • Marks Supply • Celebrating 50+ Years

Maytag Dealerships

www.maytaghvac.com

®Registered Trademark/™Trademark of Maytag Properties, LLC or its related companies. ©NORDYNE. All rights reserved. Manufactured under license by NORDYNE, O’Fallon, MO.

The industry's mostefficient heating andcooling system.

Maytag heating and cooling productsoffer a 12-year Worry-Free LimitedWarranty and Dependability Promise.Plus, Maytag products offer ultra-highenergy efficiency and home comfort. Weoffer the widest selection of heatingand cooling systems for yourcustomers.

DEALERSHIP OPPORTUNITIESWITH EXCLUSIVE TERRITORIESAVAILABLE. CALL US TODAY.

DEALERSHIP OPPORTUNITIES WITH EXCLUSIVE TERRITORIES AVAILABLE. CALL US TODAY.

3

http://www.maytaghvac.com


GIBS

ON

– CO

NDEN

SING

UNI

TS


Air Conditioners

markssupply.net • markssupply.net •

R-410A HIGH EFFICIENCY 13 SEER Residential System1 1/2 - 5 Ton Capacity

• R-410A Refrigerant• Designed Using Galvanized Steel• Permanently Lubricated Motor• Removable Top Grille Assembly• Liquid Line Filter Drier (Field-Installed)• Easy Compressor And Control Access• Micro-Channel Coils

Gibson JS4BD-KA/KB Series Features and Benefits

OVERALL DIMENSIONS (in.)

JS4BD 018KB 024KB 030KB 036KB 042KB 048KB 060KB

H 23 ½ 23 ½ 27 ½ 27 ½ 27 ½ 27 ½ 31 ½

W 22 ¾ 22 ¾ 22 ¾ 22 ¾ 30 ¾ 30 ¾ 30 ¾

D 22 ¾ 22 ¾ 22 ¾ 22 ¾ 30 ¾ 30 ¾ 30 ¾

PHYSICAL & ELECTRICAL SPECIFICATIONS

Model Number JS4BD 018KB 024KB 030KB 036KB 042KB 048KB 060KB

Electrical Data

Volts-Cycles-Phase (1) 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1

Total Amps 9.3 13.5 14.8 18.0 19.4 23.2 27.8

Delay Fuse Max (2) 20 25 30 35 40 50 60

Min. Circuit Ampacity 11.6 16.7 18.3 22.2 23.9 28.7 34.4

Refrigerant Suction line O.D. (all length of liquid lines are 3/8”

O.D.)

0-24 ft. 3/4” 3/4” 3/4” 3/4” 7/8” 7/8” 7/8”

25-39 ft. 3/4“ 3/4“ 3/4“ 7/8” (3) 7/8” 7/8” 1-1/8” (4)

40-75 ft. 3/4” 3/4” 3/4” 7/8” (3) 7/8” 7/8” 1-1/8” (4)

Approximate Weight (lbs)Net 109 125 138 140 179 179 188

Ship 114 130 144 146 187 187 197

(1) Operating Voltage Range: 187v min. — 253v max.(2) HACR Type Circuit Breakers may be used.(3) Requires 7/8” to 3/4” reducer from line to unit.(4) Requires 7/8” to 1-1/8” reducer from line to unit.(5) Additional charge for line sets above 15 feet.

Values based on suction line as follows with 3/8” liquid line.a)3/4” = 0.6 oz. per additional foot.b)7/8” = 0.7 oz. per additional foot.c)1 1/8 = 0.8 oz per additional foot.

Air DischargeAllow Adequate Clearance for

W

H

D

EX: JS4BD-036KB JS 4 B D - 036 K BNominal Capacity(000) BTU Electrical Code

K = 208/230-60-1

JS - Air ConditionerJT - Heat Pump

Design Series

Product

BD = Braze 13 SEER

Revision

MODEL IDENTIFICATION CODES

Warranty10-Year All-Parts*

1-Year Quality Pledge** Consumer Product Registration Required

4

http://www.gibsonhvac.com/air-conditioners.html


GIBS

ON

– CO

NDEN

SING

UNI

TS

• Celebrating 50+ Years

Air Conditioners


R-410A HIGH EFFICIENCY 13 SEER Residential System1.5 - 3 Ton Capacity

• R-410A Refrigerant• Designed Using Galvanized Steel• Permanently Lubricated Motor• Removable Top Grille Assembly• Liquid Line Filter Drier• Easy Compressor And Control Access• Micro-Channel Coils

Gibson JS6BD-K(A) Series Features and Benefits


JS6BD 018K 024K 030K 036K

H 27 ½ 27 ½ 27 ½ 35 ½

W 22-3/4 22-3/4 22-3/4 22-3/4

D 22-3/4 22-3/4 22-3/4 22-3/4


Model Number JS6BD 018K 024K 030K 036K

Electrical Data

Volts-Cycles-Phase (1) 208/230-60-1

Total Amps 8.2 10.3 10.8 16.4

Delay Fuse Max (2) 15 20 25 35

Min. Circuit Ampacity 10.1 12.7 13.3 20.1


O.D.)

15-24 ft. 3/4” 3/4” 3/4” 3/4”

25-39 ft. 3/4” 3/4“ 3/4“ 7/8” (3)

40-75 ft. 3/4” 3/4” 3/4” 7/8” (3)

Approximate Weight (lbs)Net 109 113 116 135

Ship 114 118 121 140


Values based on suction line as follows with 3/8” liquid line.

a) 3/4” = 0.6 oz. per additional foot.b) 7/8” = 0.7 oz. per additional foot.c) 1 1/8 = 0.8 oz per additional foot.


W

H

D

EX: JS6BD-036K JS 6 B D - 036 KNominal Capacity(000) BTU Electrical Code

K = 208/230-60-1


Design Series

Product

BD = Braze 13 SEER

ARevision

Warranty5-Year All-Parts

5-Year on Compressor

Weblink for Gibson AC’s found atwww.gibsonhvac.com/AcHp.htm

5


GIBS

ON

– CO

NDEN

SING

UNI

TS


Air Conditioners


GIBS

ON

– CO

NDEN

SING

UNI

TS

• R-410A Refrigerant • Micro-Channel Coils• Permanently Lubricated Motor• Removable Top Grille Assembly• Liquid Line Filter Drier (Field-Installed)• Easy Compressor And Control Access


JS4BE 018KA 024KA 030KA 036KA 042KA 048KA 060KA

H 27 31 27 35 39 39 43

W 22-3/4 22-3/4 30-3/4 30-3/4 30-3/4 30-3/4 30-3/4

D 22-3/4 22-3/4 30-3/4 30-3/4 30-3/4 30-3/4 30-3/4


Model Number JS4BD 018KA 024KA 030KA 036KA 042KA 048KA 060KA

Electrical Data

Volts-Cycles-Phase (1) 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1 208/230-60-1

Total Amps 9.9 14.4 15.0 15.1 19.4 21.3 29

Delay Fuse Max (2) 20 30 30 30 40 45 60

Min. Circuit Ampacity 12.1 17.7 18.5 18.6 23.9 26.3 35.6


O.D.)

0-24 ft. 3/4” 3/4” 3/4” 3/4” 7/8” 7/8” 7/8”

25-39 ft. 3/4“ 3/4“ 3/4“ 7/8” (3) 7/8” 7/8” 1-1/8” (4)

40-75 ft. 3/4” 3/4” 3/4” 7/8” (3) 7/8” 7/8” 1-1/8” (4)

Approximate Weight (lbs)Net 124 144 179 188 198 208 223

Ship 130 151 187 197 207 217 235


Values based on suction line as follows with 3/8” liquid line.a)3/4” = 0.6 oz. per additional foot.b)7/8” = 0.7 oz. per additional foot.c)1 1/8 = 0.8 oz per additional foot.


W

H

D

R-410A HIGH EFFICIENCY 14 SEER Residential System1 1/2 - 5 Ton Capacity

Gibson JS4BE Series Features and Benefits

EX: JS4BE-036K JS 4 B E - 036 K ANominal Capacity(000) BTU Electrical Code

K = 208/230-60-1


Design Series

Product

BE = Braze 14 SEER

Revision




EX: JS6BF-036K(A,B) JS 6 B F - 036 K ANominal Capacity(000) BTU Electrical Code

K = 208/230-60-1


Design Series

Product

BD = Braze 15 - 17 SEER

Revision

6


HVAC Product Buyers Guide • Marks Supply • Celebrating 50+ Years • Celebrating 50+ Years

GIBS

ON

– CO

NDEN

SING

UNI

TS

Air Conditioners

R-410A EXTRA HIGH EFFICIENCY 16 SEER Residential System2 - 3 Ton Capacity

• R-410A Refrigerant• Copeland Scroll Compressor• Composite Base Pan• Copper Tube / Aluminum Fin Coils• Removable Top Grille Assembly• Liquid Line Filter Drier• Easy Compressor And Control Access

Gibson JS6BF Series* Features and Benefits

*SPECIAL ORDER ITEM


JS6BF 024K 030K 036K

H 35 ½ 27 ½ 39 ½

W 22 ¾ 30 ¾ 30 ¾

D 22 ¾ 30 ¾ 30 ¾


Model Number JS6BF- 024K 030K 036K

Electrical Data

Volts-Cycles-Phase (1) 208/230-60-1

Total Amps 14.1 13.7 15.1

Delay Fuse Max (2) 30 25 30

Min. Circuit Ampacity 17.5 16.9 18.6


O.D.)

0-24 ft. 3/4” 3/4” 3/4”

25-39 ft. 3/4“ 3/4“ 7/8” (3)

40-75 ft. 3/4” 3/4” 7/8” (3)

Approximate Weight (lbs)Net 164 179 198

Ship 171 187 207

Sound Rating db 74 79 79


Values based on suction line as follows with 3/8” liquid line.a) 3/4” = 0.6 oz. per additional foot.b) 7/8” = 0.7 oz. per additional foot.c) 1 1/8 = 0.8 oz per additional foot.


W

H

D

EX: JS6BF-036K(A,B) JS 6 B F - 036 K ANominal Capacity(000) BTU Electrical Code

K = 208/230-60-1


Design Series

Product

BD = Braze 15 - 17 SEER

Revision




Online resources for HVAC tips online can be found atwww.nordyneu.com

7


NORD

YNE

– CO

ILS


Indoor Coils


C7 Uncased Coil DataC7 UNCASED 1824-A 3036-A 1824-B 3036-B 3642-B 30-C 3648-C 48-C 60-C 42-D 48-D 60-D

Face Area (ft^2) 3.43 3.43 3.43 3.43 4.87 3.43 4.87 5.82 5.82 4.87 5.82 5.82

Fins per inch 20 18 20 20 20 20 20 20 20 20 20 20

W -Width(in.) 12-3/4 12-3/4 16 16 16 19-1/2 19-1/2 19-1/2 19-1/2 23 23 23

H - Height (in.) 18-1/2 18-1/2 18 18 25 18 24-1/2 28-1/2 28-1/2 23-3/4 27-3/4 27-3/4

HL - Height of Liquid Line (in.) 17-1/2 17-1/2 17-1/2 17-1/2 23-1/2 23-1/2 23-1/2 27 27 27 27 27

HS - Height of Suction Line (in.) 15-1/2 15-1/2 15-1/2 15-1/2 21-1/2 21-1/2 21-1/2 25 25 25 25 25

Connection - LiquidLine 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

Connection - Suction Line 3/4 3/4 3/4 3/4 7/8 3/4 7/8 7/8 7/8 7/8 7/8 7/8

Horizontal Drain Kit 920265 920265 920265 920265 920266 920266 920266 920267 920267 920267 920267 920267

Tube Kit for TXV 921824 921824 921825 921825 921826 921827 921828 921829 921829 921830 921831 921831

Metering Orifice Size (in.) 0.048 0.061 0.055 0.067 0.071 0.061 0.067 0.077 0.083 0.071 0.087 0.083

Nominal Airflow (CFM) (Lower Tonnage) 600 1,000 550 1,000 1,300960

1,2501,300 1,700 1,300 1,300 1,700

Nominal Airflow (CFM) (Higher Tonnage) 700 1,200 750 1,200 1,300 1,400

Pressure Drop at nom airflow (in. wc) (Lower Tonnage)

0.12 0.26 0.09 0.26 0.25

0.26

0.24

0.31 0.30 0.30 0.31 030Pressure Drop at nom airflow (in. wc) (Higher Tonnage)

0.17 0.27 0.15 0.27 0.27 0.29

C 7 BA M 0 36 U - BCoil

DesignSeries

BA = "A" Vertical Coil BH = Horizontal Multipoise Coil

Micro-Channel

Nominal Capacity(000) Btuh

C = Cased CoilU = Uncased Coil

Cabinet IdentifierA = 14-1/4" WidthB = 17-1/2" WidthC = 21" WidthD = 24-1/2" Width

Metering Device0 = Orifice

Evaporator Coil with Micro Channel

Resists corrosion and improves efficiency.

C7 Indoor Coils

W2 1/2

HS

HL

3 1/8

19 1/2

H


Did You Know? Nordyne has a dedicated website with in-depth info on micro-channel coils at

www.microchannelfacts.com

8

http://www.nordyne.com/product-innovation/micro-channel-coil

http://www.microchannelfacts.com/


SUM

MIT

& N

ORD

YNE

– CO

ILS


Indoor Coils

C7 Cased Coil DataC7 CASED 1824-A 3036-A 1824-B 3036-B 3642-B 30-C 3648-C 48-C 60-C 42-D 48-D 60-D

Face Area (ft^2) 3.43 3.43 3.43 3.43 4.87 3.43 4.87 5.82 5.82 4.87 5.82 5.82

Fins per inch 20 18 20 20 20 20 20 20 20 20 20 20

W -Width(in.) 14-1/4 14-1/4 17-1/2 17-1/2 17-1/2 21 21 21 21 24-1/2 24-1/2 24-1/2

H - Height (in.) 20-3/4 20-3/4 20-3/4 20-3/4 26-3/4 26-3/4 26-3/4 30-1/4 30-1/4 30-1/4 30-1/4 30-1/4

HL - Height of Liquid Line (in.) 17-1/2 17-1/2 17-1/2 17-1/2 23-1/2 23-1/2 23-1/2 27 27 27 27 27

HS - Height of Suction Line (in.) 15-1/2 15-1/2 15-1/2 15-1/2 21-1/2 21-1/2 21-1/2 25 25 25 25 25

Connection - LiquidLine 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8

Connection - Suction Line 3/4 3/4 3/4 3/4 7/8 3/4 7/8 7/8 7/8 7/8 7/8 7/8

Horizontal Drain Kit 920265 920265 920265 920265 920266 920266 920266 920267 920267 920267 920267 920267

Tube Kit for TXV 921824 921824 921825 921825 921826 921827 921828 921829 921829 921830 921831 921831

Metering Orifice Size (in.) 0.048 0.061 0.055 0.067 0.071 0.061 0.067 0.077 0.083 0.071 0.087 0.083

Nominal Airflow (CFM) (Lower Tonnage) 600 1,000 550 1,000 1,300960

1,2501,300 1,700 1,300 1,300 1,700

Nominal Airflow (CFM) (Higher Tonnage) 700 1,200 750 1,200 1,300 1,400

Pressure Drop at nom airflow (in. wc) (Lower Tonnage)

0.12 0.26 0.09 0.26 0.25

0.26

0.24

0.31 0.30 0.30 0.31 0.30Pressure Drop at nom airflow (in. wc) (Higher Tonnage)

0.17 0.27 0.15 0.27 0.27 0.29

Summit CA-0 Series Uncased A Coils

Summit Generic Replacement Coils

A

C

B

MODELMETERING

DEVICE

A

WIDTH

B

DEPTH

C

HEIGHT

CA024A8E2D0A3 TXV 13-1/8” 19” 14”

CA030A8E2D0A3 TXV 13-1/8” 19” 14”

CA036A8E3D0C3R TXV 16-5/8” 19” 16”

CA030A8E6D0C3 TXV 16-5/8” 19” 22”

CA048A9E7Y0E3 TXV 19-5/8” 20-1/2” 24” MODELMETERING

DEVICE

A

WIDTH

B

DEPTH

C

HEIGHT

CA024A8R1H0A3 PISTON 13-1/8” 19” 12”

CA030A8R1K0A3 PISTON 13-1/8” 19” 12”

CA036A8R3M0B3 PISTON 14-7/8” 19” 16”

CA048A865U0D3 PISTON 18” 19” 20”

CA060A86530D3 PISTON 18” 19” 20”

CA024A8R1D0A3 TXV 13-1/8” 19” 12”

CA030A8R1D0A3 TXV 13-1/8” 19” 12”

CA036A8R3D0B3 TXV 14-7/8” 19” 16”

CA048A865Z0D3 TXV 18” 19” 20”

CA060A865Z0D3 TXV 18” 19” 20”

CONNECTIONS

TONS LIQUID SUCTION

1-1/2 – 3 3/8” 3/4”

3-1/2 – 5 3/8” 7/8”

Note: Evaporator coils equipped with a15%-bleed type expansion valve must beused with condensing units not equipped with hard start components.

• Left and Right handed drain connections are standard.* Dual 3/4 FPT drains on each side is standard. * All units are Leak tested at 500 psi & then factory sealed.

* Left handed refrigerant connections are standard.* Schrader port for pressure verification is standard.* Injection molded high temperature UL approved plastic upow drain pan.* Refrigeration connections are SWAGED and factory sealed with copper caps.

9

http://www.nordyne.com/product-innovation/micro-channel-coil

http://www.ecovisionsales.ca/summit_1.htm

GIBS

ON

– CO

NDEN

SING

UNI

TS


Match-ups for Gibson units


JS6BD BUILDER SERIES – 5 YEAR WARRANTYCOND MODEL COIL MANUF COIL MODEL METERING COIL – W (in.) COIL – H (in.) COIL – D (in.) AHRI REF NO.

JS6BD-018K SUMMIT CA024A8R1H0A3 ORIFICE 13-1/8” 12 19 N/A

JS6BD-024K SUMMIT CA024A8R1H0A3 ORIFICE 13-1/8 12 19 N/A

JS6BD-030K SUMMIT CA030A8R1K0A3 ORIFICE 13-1/8 12 19 N/A

JS6BD-036K SUMMIT CA036A8R3M0B3 ORIFICE 14-7/8 16 19 N/A

JS4BD BUILDER SERIES – 10 YEAR WARRANTYMODEL COIL MANUF COIL MODEL METERING COIL – W (in.) COIL – H (in.) COIL – D (in.) AHRI REF NO.

JS4BD-018KBNORDYNESUMMIT

C7BAM01824U-BCA024A8E2D0A3

ORIFICETXV

16”13-1/8

1814

19-1/219

50550157012788



ORIFICETXV

1613-1/8

1814

19-1/219

50550224249343



ORIFICETXV

1613-1/8

1814

19-1/219

50550304249344


C7BAM03036U-BCA036A8E3D0C3R

ORIFICETXV

1616-5/8

1816

19-1/219

50550384249345


C7BAM03648U-CCA048A9E7Y0E3

ORIFICETXV

19-1/219-5/8

24-1/224

19-1/220-1/2

50550457012787


C7BAM048U-DCA048A9E7Y0E3

ORIFICETXV

2319-5/8

27-3/424

19-1/220-1/2

50809267012786

JS4BE BUILDER SERIES – 10 YEAR WARRANTYMODEL COIL MANUF COIL MODEL METERING COIL – W (in.) COIL – H (in.) COIL – D (in.) AHRI REF NO.

JS4BE-018KA SUMMIT CA030A8E6D0C3 TXV 16-5/8” 22 19 5742794

JS4BE-024KA SUMMIT CA030A8E6D0C3 TXV 16-5/8 22 19 5472793

JS4BE-030KA SUMMIT CA030A8E6D0C3 TXV 16-5/8 22 19 5742795

JS4BE-036KA SUMMIT CA048A9E7Y0E3 TXV 19-5/8 24 20-1/2 5754122

JS4BE-048KA SUMMIT CA060A9E7Y0F3 TXV 21-5/8 24 20-1/2 5742800

JS4BE-060KA SUMMIT CA060A9E7Y0FE TXV 21-5/8 24 20-1/2 4249138

GIBS

ON

– CO

NDEN

SING

UNI

TS

13 SEER GIBSON COND UNIT + NORDYNE/SUMMIT UNCASED COIL MATCH-UPS

14.5 SEER GIBSON COND UNIT + SUMMIT UNCASED COIL MATCH-UPS

W2 1/2

HS

HL

3 1/8

19 1/2

H

AHRI

MAT

CH-U

PS

THESE ARE THE MOST COMMON MATCH-UPS. AHRI CERTIFIED MATCH UPS ARE CURRENT AT THE TIME OF PUBLISHINGVISIT WWW.AHRIDIRECTORY.ORG FOR MOST UPDATED INFORMATION.SUMMIT COILS COME WITH FACTORY-INSTALLED TXVs. 10 YEAR WARRANTY APPLIES WHEN UNIT AND COIL IS REGISTERED ON LINE

AC PACKAGES INCLUDE: CONDENSING UNIT UNCASED “A” COIL NOTE: BASED ON PRODUCT AVAILABILITY. WE WILL SUPPLY EITHER NORDYNE OR SUMMIT ‘A’ COIL

AC INSTALL KIT: (SOLD SEPARATELY) DISCONNECT, WHIPKITS, PERMAGUM CONDENSER PAD -OR- WALL BRACKET, 25’ LINE SET

KEYWORD SEARCH FOR:

JS6BD SERIES : GIBBUILD JS4BD SERIES : GIBACP JS4BE SERIES : GIBREB

10

http://www.ahridirectory.org/ahridirectory/pages/home.aspx

MSA4BD VALUE SERIES – 10 YEAR WARRANTYCOND MODEL COIL MANUF COIL MODEL METERING COIL – W (in.) COIL – H (in.) COIL – D (in.) AHRI REF NO.

MSA4BD018KBNORDYNESUMMIT


ORIFICETXV

16”13-1/8

1814

19-1/219

50559057016030



ORIFICETXV

1613-1/8

1814

19-1/219

50559127016028



ORIFICETXV

1613-1/8

1814

19-1/219

50559227016026



ORIFICETXV

1616-5/8

1816

19-1/219

50559307016084



ORIFICETXV

19-1/219-5/8

24-1/224

19-1/220-1/2

50559377016024



ORIFICETXV

2319-5/8

27-3/424

19-1/220-1/2

50824387016040

PSA4BD PREMIUM SERIES – 12 YEAR WARRANTYCOND MODEL COIL MANUF COIL MODEL METERING COIL – W (in.) COIL – H (in.) COIL – D (in.) AHRI REF NO.

PSA4BD018KBNORDYNESUMMIT


ORIFICETXV

1613-1/8

1814

19-1/219

50559995190887



ORIFICETXV

1613-1/8

1814

19-1/219

50560065190888



ORIFICETXV

1613-1/8

1814

19-1/219

50560167016037



ORIFICETXV

1616-5/8

1816

19-1/219

50560247016035



ORIFICETXV

19-1/219-5/8

24-1/224

19-1/220-1/2

50560317016033



ORIFICETXV

2319-5/8

27-3/424

19-1/220-1/2

50825977016031

MSA4BE SERIES – 10 YEAR WARRANTY

MODEL COIL MANUF COIL MODEL METER-ING

COIL W (in.)

COILH (in.)

COILD (in.) AHRI REF NO.

MSA4BE018KA SUMMIT CA030A8E6D0C3 TXV 16-5/8 22 19 7017270



MSA4BE036KA SUMMIT CA048A9E7Y0E3 TXV 19-5/8 24 20-1/2 7017267

PSA4BE SERIES – 12 YEAR WARRANTY

MODEL COIL MANUF COIL MODEL METER-ING

COILW (in.)

COILH (in.)

COILD (in.) AHRI REF NO.

PSA4BE018KA SUMMIT CA030A8E6D0C3 TXV 16-5/8 22 19 7017264



PSA4BE036KA SUMMIT CA048A9E7Y0E3 TXV 19-5/8 24 20-1/2 7017265

13 SEER MAYTAG COND UNIT + NORDYNE/SUMMIT UNCASED COIL MATCH-UPS

14.5 SEER MAYTAG COND UNIT + SUMMIT UNCASED COIL MATCH-UPS


AHRI

MAT

CH-U

PS


Match-ups for Maytag units

W2 1/2

HS

HL

3 1/8

19 1/2

H

AC PACKAGE INCLUDE:

CONDENSING UNIT UNCASED “A” COIL NOTE: BASED ON PRODUCT AVAILABILITY. WE WILL SUPPLY EITHER NORDYNE OR SUMMIT ‘A’ COIL

AC INSTALL KIT: (SOLD SEPARATELY) DISCONNECT, WHIPKITS, PERMAGUM CONDENSER PAD -OR- WALL BRACKET, 25’ LINE SET

AHRI CERTIFIED MATCH UPS ARE CURRENT AT THE TIME OF PUBLISHING

VISIT WWW.AHRIDIRECTORY.ORG FOR MOST UPDATED INFORMATION.

SUMMIT COILS COME WITH FACTORY-INSTALLED TXVs.

10 & 12 YEAR WARRANTY APPLIES WHEN UNIT AND COIL IS REGISTERED ON LINE

KEYWORD SEARCH FOR

MSA4BD SERIES : MAYACP VALUE PSA4BD SERIES : MAYACP PREMIUM MSA4BE SERIES : MAYREB VALUE PSA4BE SERIES : MAYREB PREMIUM

11

http://www.ahridirectory.org/ahridirectory/pages/home.aspx

GIBS

ON

– CO

NDEN

SING

UNI

TS


Mini-Split Air Conditioners


15 SEER DUCTLESS MINI SPLITS

Single-Zone Cooling Only

• Whisper-Quiet• Super Efficient• Auto Swing• Auto Operation

• Superior Filtration• Auto Restart• Wireless Remote• Inverter Technology

COMFORT-AIRE “DV” SERIES Features and Benefits

SPECIFICATIONSDVC

095SD-0DVC

12SD-0DVC

18SD-1DVC

24SD-1

Power Supply 115-1-60 115-1-60 208/230-1-60 208/230-1-60

Cooling Capacity (BTUH) 9,000 12,000 18,000 22,000

EER 9.0 9.0 9.0 9.0

Cooling Amps 8.7 11.7 8.7 10.7

Air flow (CFM) 282/247/188 341/294/235 735/647/470 705/647/529

Fan Speeds (Cool/Heat/Fan) 3/-/3 3/-/3 3/-/3 3/-/3

Sound Level (dBa) H-M-L 39/35/28 39/35/29 42/39/31 47/45/39

Indoor Unit - Width (in.) 26-3/4 30-5/16 35-11/16 40-9/16

Indoor Unit - Height 10-1/8 10-1/8 10-7/8 12-7/16

Indoor Unit - Depth 7-1/8 7-7/16 7-13/16 8-5/8

Outdoor Unit - Width (in.) 26 26 29-15/16 33-5/16

Outdoor Unit - Height 21-9/32 21-9/32 23-1/4 27-9/16

Outdoor Unit - Depth 10-7/16 10-7/16 11-1/4 12-5/8

Indoor Unit - Net Wt/Shipping Wt. (lbs.) 15.4/17.6 16.5/20.9 19.8/25.4 26.46/33.1

Outdoor Unit - Net Wt/Shipping Wt. (lbs.) 62.8/69.5 65/71.7 76/81.6 98.1/105.8

Line Sets O.D. (inch)

Liquid Connection (flare) 1/4 1/4 1/4 3/8

Suction Connection (flare) 3/8 1/2 1/2 5/8

Maximum Line Set Length1 65.5 ft. 65.5 ft. 82 ft. 82 ft.

Maximum Elevation (outdoor)2 26 ft. 26 ft. 32 ft. 32 ft.

Outdoor Unit - Main Power Connection

Outdoor Unit - Min. Circuit Ampacity 19.0 20.0 14.0 16.0

Outdoor Unit - Max. Fuse/HACR Circ. Brkr 30A 30A 20A 25A

Recommended Connecting Cable Type 14AWG / 4 conductor

600V THHN unshielded bare copper

COM

FORT

-AIR

E

Warranty5-Year On Compressor3

1-Year On Parts

* Always follow local, state and national electrical codes1 Min. 10 ft. line set recommended2 Oil traps should be installed every 16.5 to 23 feet (5-7m) when the outdoor unit is installed above the indoor unit.3 Some limitations apply, see printed warranty for details Design, specifications and performance data subject to change without notice.

NEW

INVERTER TECHNOLOGY

Economical Zone ControlOur “DV” Series, rated at 15 SEER, offers economical zone control

Only the room or area being used is conditioned and inverter technology matches the compressor speed to the room’s changing temperature requirements.

Wireless Remote

Easy to select temperature & modeWith the “Follow Me” feature activated, the remote detects the temperature at its location and the unit adjusts operation to reach the set point wherever the remote is located in the room.

Sleek Indoor Air Handler

Extends just 7-1/8” to 8-5/8” into the room, depending on the modelThe air handler has a self-cleaning evaporator coil with gold fin anti-corrosive coating which prevents bacteria from breeding and spreading. Not only is the air handler visually unobtrusive, it’s also so quiet you’ll forget it’s even there.

“DV” SERIESSingle Zone Cooling

12

http://aitons.com/Ductless2014/Aitons_Ductless_Mini-Split_Systems_brochure-w.pdf

14.5–19.3 SEER DUCTLESS MINI SPLITSSingle-Zone Heat PumpsApplication: Single zone models are especially suited to one room residential installations such as bedrooms, sunrooms, additions and workshops. For large spaces up to 1,550 square feet, such as offices, conference rooms, common areas, etc. the 30-36,000 BTUH models deliver big capacity with exceptional efficiency. The inverter technology automatically matches the power delivered with the load requirements for precise temperature control.

• Attractive Cabinet• Multiple Modes• Random Swing• Remote Control

• Multi-Stage Filtration• Defrost Control• Auto Restart• Defrost Control

COMFORT-AIRE “V” VMH SERIES Features and Benefits

SPECIFICATIONS VMH09SC-1** VM12SC-1** VM18SC-1** VMH24SC-1

Power Supply 208/230-1-60 208/230-1-60 208/230-1-60 208/230-1-60

Cooling Capacity (BTUH) 9,000 12,000 17,500 23,000

SEER / EER 18.30/13.05 19.30/12.15 17.50/12.00 17.10/10.20

HSPF 8.60 8.90 9.55 8.40

Cooling Amps 3.5 4.7 6.7 9.7

Dehumidifcation (Pts/Hr.) 2.3 2.5 3.6 4.7

Heating Capacity (BTUH) 9,900 13,300 17,400 23,600

Heating Amps 3.8 5.4 6.3 9.5

Air flow (CFM) 400/318/288 430/341/312 624/589/506 736/677/589

Fan Speeds (Cool/Heat/Fan) 3 3 3 3

Sound Level (dBa) H-M-L 39/34/29 39/35/31 48/45/42 48/45/42

Indoor Unit - Width (in.) 33-1/4 33-1/4 42-5/8 42-5/8

Indoor Unit - Height 11-1/4 11-1/4 12-5/8 12-5/8

Indoor Unit - Depth 6-1/2 6-1/2 8-3/16 8-3/16

Outdoor Unit - Width (in.) 29-15/16 29-15/16 33-1/4 35-7/16

Outdoor Unit - Height 23-1/4 23-1/4 27-9/16 33-7/8

Outdoor Unit - Depth 11-1/4 11-1/4 12-5/8 12-7/16

Indoor Unit - Net Wt/Ship Wt. (lbs.) 19.8/24.3 19.8/24.3 32/44.0 32.44.0

Outdoor Unit - Net Wt/Ship Wt. (lbs.) 84.9/90.4 87/92.6 110.2/119.0 136.7/147.7

Line Set O.D. (in) : Liquid Conn. (flare) 1/4 1/4 1/4 3/8

Line Set O.D. (in) : Suction Conn. (flare) 3/8 1/2 1/2 5/8

Line Set O.D. (in) : Max. Line Set Length1 66 ft. 66 ft. 82 ft. 82 ft.

Line Set O.D. (in) : Max. Elev. (outdoor)2 26 ft. 26 ft. 33 ft. 33 ft.

Outdoor Unit : Min. Circuit Ampacity 15 15 15 15

Outdoor Unit : Max. Fuse/HACR Circ. Brkr 20A 20A 20A 20A

Outdoor Unit : Recc. Conn. Cable Type 14 AWG / 4 Conductor, 600V THHN unshielded stranded bare copper


COM

FORT

-AIR

E


Mini-Split Heat Pumps

* Main power connection is 208-230V.** Energy-Star compliant models.1 Min. 10 ft. line set recommended2 Oil traps should be installed every 16.5 to 23 feet (5-7m) when the outdoor unit is installed above the indoor unit.3 Some limitations apply, see printed warranty for details Design, specifications and performance data subject to change without notice.

Warranty6-Year On Compressor3

2-Year On Parts

Comfort and EfficiencyComfort and energy efficiency combine in these attractive wall-mount mini-splits

Rated as high as 19.3 SEER, they include all the advantages of advanced inverter technology

Quiet Operation

“V” Series units are very quiet.Heavy duty compressors in the condensers are not just efficient, but they also reduce noise and vibration. Inside, the balanced fan circulates large volumes of air at minimal noise levels.

Wireless Remote

Easy to select temperature & modeWith the “Follow Me” feature activated, the remote detects the temperature at its location and the unit adjusts operation to reach the set point wherever the remote is located in the room.

Low Ambient Operation

Allows cooling when outdoor temperature falls below freezingGreat for temperature/humidity sensitive environments. Additionally, a factory installed crankcase heater keeps compressor oil warm and reduces heat loss to ambient air. Low Ambient Operation: cooling 5o - 122o F, heating 5o - 93.2o F

Sleek Indoor Air Handler

Extends just 7-1/8” to 8-5/8” into the room, depending on the modelThe air handler has a self-cleaning evaporator coil with gold fin anti-corrosive coating which prevents bacteria from breeding and spreading. Not only is the air handler visually unobtrusive, it’s also so quiet you’ll forget it’s even there.

“V” SERIESInverter Technology

13



Mini-Split Heat Pumps


COM

FORT

-AIR

E

This is a special order product

14



DUCT

ING

& V

ENTI

NG

Ducting, Venting, Registers, Grilles and Diffusers

Proudly serving the industry since 1960

Air Distribution and Venting Products

Proudly serving the industry since 1960

Air Distribution and Venting Products

METAL FLOOR

REGISTERSSIZE COLOUR

RG 0222 3” x 10” WHITE

RG 0227 4” x 10” BROWN

RG 0246 4” x 10” WHITE

SIDE WALL

GRILLESSIZE COLOUR

RG 0428 14” x 8” WHITE

RG 1438 10” x 3” WHITE

CIRCULAR

PLASTIC DIFFUSERSSIZE COLOUR

DR 04 4” WHITE

DR 05 5” WHITE

DR 06 6” WHITE

IMPROVE COMFORT & ENERGY EFFICIENCY WITH IMPERIAL PLASTIC or METAL REGISTERS, GRILLES & DIFFUSERS

15

http://www.deflecto.com/products/pc/Air-Distribution-c2.htm

http://www.imperialgroup.ca/registersgrilles.cfm

A

23 1

/2

C

34 1

/2

22 1/22 3/4

BottomPanel

25 3/822 1/2

17 1

/4

17 7

/8

28

B

19

22 1/2

24 7

/8

15

231 1/4

Front Brace

BOTTOM VIEWTOP VIEW

4 Knockouts(both sides)

1

LEFT SIDE RIGHT SIDE

3 1/43

Gas (Ø 1 5/8)

T-stat(Ø 7/8) Electric (Ø 7/8)

Vent pipe(Ø 3”)

Cond. (Ø 1 1/16)

T-stat(Ø 7/8)

Electric(Ø 7/8)

Gas(Ø 1 5/8)

Condensate(Ø 1 1/16)

Vent pipe(Ø 3”)

Flue

FRONT VIEW

CombustionAir

FLANGES

*SC Model #’s

Dimension “A”

Dimension “B”

Dimension “C”

038D-23A 14 ¼ 12 ⅝ 12 ⅞054D-24B

17 ½ 15 ⅞ 16 ⅛072D-24B072D-35C

21 19 ⅜ 19 ⅝090D-35C108D-45D

24 ½ 22 ⅞ 23 ⅛120D-45D

GIBS

ON

– CO

NDEN

SING

UNI

TS


AFUE Furnaces 92.1%


HIGH EFFICIENCY / DIRECT VENTCondensing Upflow/Horizontal Input 38,000 – 120,000 BTUH

Induced Draft – 92.1% AFUE

• 100% Fired And Tested• 30-Second Blower Delay• Hot Surface Ignitor• Color-Coded Wiring Harness

• High Static Blowers• Tubular Primary Heat Exchanger• Multi-Speed Direct Drive Blower• LP Convertible• Diagnostic Lights For Easy Troubleshooting• Incorporates Integrated Control Board

GIBSON KG7S (C and L Series) Features and Benefits

KG7SC MODEL NOS. -038D-23A -54D-24B -072D-24B 072D-35C -090D-35C -108D-45D -120D-45D

Input - Btuh (a) 38,000 54,000 72,000 72,000 90,000 108,000 120,000

Heating Capacity - Btuh 35,000 49,700 66,000 66,000 82,800 99,000 110,400

AFUE 92.1 92.1 92.1 92.1 92.1 92.1 92.1

Blower D x W 10 x 6 11 x 8 11 x 8 10 x 10 11 x 10 11 x 10 11 x 10

Motor H.P. / Speed / Type 1/3 / 4 / PSC 1/2 / 4 / PSC 1/2 / 4 / PSC 1/2 / 4 / PSC 1 / 4 / PSC 1 / 4 / PSC 1 / 4 / PSC

Motor FLA 4.80 8.20 8.20 7.50 13.75 13.75 13.75

Rated Ext. SP - In. W.C. 0.5 0.5 0.5 0.5 0.5 0.5 0.5

Temperature Rise Range - oF 30-60 30-60 35-65 35-65 35-65 40-70 40-70

Shipping Weight (lbs) 100 120 125 130 135 155 155

COM

FORT

-AIR

EGI

BSO

N –

COND

ENSI

NG U

NITS

GIBS

ON

FURN

ACES

Design Series

A = 80% Upflow/HorizontalC = 92.1% / 95.1% Upflow/HorizontalK = 80% DownflowL = 92.1% / 95.1% Downflow

KG S 090 C 23

Input Heating Capacity038 = 38,000054 = 54,000072 = 72,000090 = 90,000108 = 108,000120 = 120,000

S = Single StageT = Two Stage

Gas Furnace

C

C = StandardN = 80% AFUE Low NOxD = 90+% AFUE Low NOx

Cooling Airflow23 = 2-3 Tons24 = 2-4 Tons35 = 3-5 Tons45 = 4-5 Tons

7Cabinet Width

A = 14.25B = 17.50C = 21.00D = 24.50

B

Warranty10-Year On Parts3


3 Some limitations apply, see printed warranty for details Design, specifications and performance data subject to change without notice.


16

http://www.gibsonhvac.com/gas-furnaces.html

A

23 1

/2C

34 1

/2

22 1/22 3/4

BottomPanel

25 3/822 1/2

17 1

/4

17 7

/8

28

B

19

22 1/2

24 7

/8

15

231 1/4

Front Brace

BOTTOM VIEWTOP VIEW


1


3 1/43

Gas (Ø 1 5/8)


Vent pipe(Ø 3”)

Cond. (Ø 1 1/16)

T-stat(Ø 7/8)

Electric(Ø 7/8)

Gas(Ø 1 5/8)


Vent pipe(Ø 3”)

Flue

FRONT VIEW

CombustionAir

FLANGES

*SC Model #’s

Dimension “A”

Dimension “B”

Dimension “C”

038D-23A 14 ¼ 12 ⅝ 12 ⅞054D-24B

17 ½ 15 ⅞ 16 ⅛072D-24B072D-35C

21 19 ⅜ 19 ⅝090D-35C108D-45D

24 ½ 22 ⅞ 23 ⅛120D-45D

GAS FURNACE DIMENSIONSKG7SC 90+ Upflow/Horizontal Series

GAS FURNACE COMPONENTS92.1% AFUECondensing UpflowHorizontal Units

GIBSON KG7S (C and L Series)


GIBS

ON

FURN

ACES


92.1% AFUE Furnaces

Blower Assembly

Blower Door Switch

BurnerAssembly

Control Board

FinishFlange

FlameSensor

Gas ManifoldGas Valve

Igniter

Inducer Assembly

Main Air Limit Switch

Pressure Switch(Inducer)

Pressure Switch - Condensate(‘B’, ‘C’, & ‘D’ cabinets only)

Roll-OutSwitch

Transformer

Vent Limit Switch

17


GIBS

ON

– CO

NDEN

SING

UNI

TS


95.1% AFUE Furnaces


HIGH EFFICIENCY SINGLE STAGE – 95.1% AFUECondensing Upflow/Horizontal Input 38,000 – 120,000 BTUH


• High Static Blowers• Tubular Primary Heat Exchanger• Multi-Speed Direct Drive Blower• LP Convertible• Diagnostic Lights For Easy Troubleshooting• Incorporates Integrated Control Board

GIBSON KG7S (D and M Series) Features and Benefits

KG7SD MODEL NOS. -038D-23B -054D-24B -072D-35C -090D-35C -108D-4SD 120D-45D

Input - Btuh (a) 38,000 54,000 72,000 72,000 108,000 120,000

Heating Capacity - Btuh 36,100 51,300 68,400 85,500 102,600 114,000

AFUE 95.0 95.0 95.0 95.0 95.0 95.0

Blower D x W 10 x 8 11 x 8 10 x 10 10 x 10 11 x 10 11 x 10

Motor H.P. / Speed / Type 1/2 - 4 - PSC 1/2 - 4 - PSC 1/2 - 4 - PSC 1 - 4 - PSC 1 - 4 - PSC 1 - 4 - PSC

Motor FLA 8.6 8.6 8.0 13.75 13.75 13.75

Rated Ext. SP - In. W.C. 0.5 0.5 0.5 0.5 0.5 0.5

Temperature Rise Range - oF 30-60 30-60 35-65 35-65 40-70 40-70

Shipping Weight (lbs) 100 120 130 135 155 155

COM

FORT

-AIR

EGI

BSO

N –

COND

ENSI

NG U

NITS

GIBS

ON

FURN

ACES

Design Series

KG S 090 C 23

Input Heating Capacity038 = 38,000054 = 54,000072 = 72,000090 = 90,000108 = 108,000*118 = 118,000120 = 120,000


Gas Furnace

D

C = StandardN = 80% AFUE Low NOxD = 90+% AFUE Low NOx

Cooling Airflow23 = 2-3 Tons24 = 2-4 Tons35 = 3-5 Tons45 = 4-5 Tons

7Cabinet Width

A = 14.25B = 17.50C = 21.00D = 24.50

B

A = 80% Upflow/HorizontalC = 92.1% / 95.1% Upflow/HorizontalK = 80% DownflowL = 92.1% / 95.1% DownflowQ = 96.4% AFUE Upflow/HorizontalD = 95.0% Single Stage Upflow/HorizontalM = 95.0% Single Stage Downflow

* 118 = 118,000 for SM Models A

23 1

/2

C

34 1

/2

22 1/22 3/4

BottomPanel

25 3/822 1/2

17 1

/4

17 7

/8

28

B

19

22 1/2

24 7

/8

15

231 1/4

Front Brace

BOTTOM VIEWTOP VIEW


1


3 1/4

Gas (Ø 1 5/8)


Vent pipe(Ø 3”)

Cond. (Ø 1 1/16)

T-stat(Ø 7/8)

Electric(Ø 7/8)

Gas(Ø 1 5/8)


Vent pipe(Ø 3”)

Combustion Air

FRONT VIEW

FLANGES

*SD Upflow / Horizontal FurnacesModel #’s Dim. -A- Dim -B- Dim -C-038D-24B

17 1/2 15 7/8 16 1/8054D-24B072D-35C

21 19 3/8 19 5/8090D-35C108D-45D

24 1/2 22 7/8 23 1/8120D-45D

NOTE: Dimensions shown in inches.

GIBS

ON

– CO

NDEN

SING

UNI

TSCO

MFO

RT-A

IRE

GIBS

ON

– CO

NDEN

SING

UNI

TSGI

BSO

N FU

RNAC

ES




MEETS ONTARIO BUILDING CODE

18


A

23 1

/2

C

34 1

/2

22 1/22 3/4

BottomPanel

25 3/822 1/2

17 1

/4

17 7

/8

28

B

19

22 1/2

24 7

/8

15

231 1/4

Front Brace

BOTTOM VIEWTOP VIEW


1


3 1/4

Gas (Ø 1 5/8)


Vent pipe(Ø 3”)

Cond. (Ø 1 1/16)

T-stat(Ø 7/8)

Electric(Ø 7/8)

Gas(Ø 1 5/8)


Vent pipe(Ø 3”)

Combustion Air

FRONT VIEW

FLANGES

*SD Upflow / Horizontal FurnacesModel #’s Dim. -A- Dim -B- Dim -C-038D-24B

17 1/2 15 7/8 16 1/8054D-24B072D-35C

21 19 3/8 19 5/8090D-35C108D-45D

24 1/2 22 7/8 23 1/8120D-45D

NOTE: Dimensions shown in inches.

HIGH EFFICIENCY SINGLE STAGE 95% AFUECondensing UpflowHorizontal Input 38,000 – 120,000 BTUH

GAS FURNACE DIMENSIONS

KG7S 95.0 Upflow/Horizontal Series

GIBSON KG7S (D and M Series)


GIBS

ON

FURN

ACES


95.0% AFUE Furnaces

BurnerAssembly

FinishFlange

FlameSensor

Igniter

Roll-OutSwitch

Gas ValveFurnace Control Board

Pressure Switch(Condensate)

Transformer

Blower Assembly

Blower Door SwitchInducer Assembly

Pressure Switch(Inducer)

Inducer Limit Switch

Main Air Limit Switch

19


GIBS

ON

– CO

NDEN

SING

UNI

TS


95.1% AFUE Furnaces


TWO STAGE, FIXED SPEED ECM

Condensing Upflow/Horizontal – 95.1 AFUEInput 60,000 – 120,000 BTUH


• High Static Blowers• Tubular Primary Heat Exchanger• Variable Speed Blower Kit (optional)• LP Convertible• Diagnostic Lights For Easy Troubleshooting• Incorporates Integrated Control Board• Energy Efficient Brushless DC (ECM) motor

GIBSON KG7T (C and L Series) Features and Benefits

KG7TC/TL MODEL NOS. -060D-23B -080D-35C -100D-35C -120D-45D

Input - Btuh (a) 60,000 j/ 39,000 80,000 / 52,000 100,000 / 65,000 120,000 / 78,000

Heating Capacity - Btuh 57,000 / 37,050 76,000 / 49,400 95,000 / 61,750 114,000 / 74,100

AFUE 95.1 95.1 95.1 95.1*

Blower D x W 11 x 8 11 x 10 11 x 10 11 x 10

Motor H.P. / Speed / Type 1/2 - BLDC 3/4 - BLDC 3/4 - BLDC 1 - BLDC

Motor FLA 6.2 8.7 8.7 11.7

Rated Ext. SP - In. W.C. 0.5 0.5 0.5 0.5

Temperature Rise Range - oF 30-60 35-65 35-65 40-70

Shipping Weight (lbs) 125 135 145 160

• TL 120 is 94.8% AFUENote: all models are 115V, 60Hz. Gas Connections are 1/2” N.P.T. AFUE = Annual Fuel Utilization Efficiency.(a) Ratings to 2,000 ft. Over 2,000 ft. reduce 4% for each 1,000 ft. above sea level.

COM

FORT

-AIR

EGI

BSO

N –

COND

ENSI

NG U

NITS

GIBS

ON

FURN

ACES

Design Series

A = 80% C = 92.1% / 95.1% K = 80% L = 92.1% / 95.1%

KG T 090 C 23

Input Heating Capacity060 = 60,000080 = 80,000100 = 100,000120 = 120,000


Gas Furnace

C

C = StandardD = 90+% AFUE Low NOx

Cooling Airflow23 = 2-3 Tons24 = 2-4 Tons35 = 3-5 Tons45 = 4-5 TonsV = VSB

7

Cabinet WidthB = 17.50C = 21.00D = 24.50

B

A

23 1

/2

C

34 1

/2

22 1/22 3/4

BottomPanel

25 3/822 1/2

17 1

/4

17 7

/8

28

B

19

22 1/2

24 7

/8

15

231 1/4

Front Brace

BOTTOM VIEWTOP VIEW


1


3 1/4

Gas (Ø 1 5/8)


Vent pipe(Ø 3”)

Cond. (Ø 1 1/16)

T-stat(Ø 7/8)

Electric(Ø 7/8)

Gas(Ø 1 5/8)


Vent pipe(Ø 3”)

Combustion Air

FRONT VIEW

FLANGES

*TC 95.1% Furnace

Cabinet Size

Dim. “A”

Dim.“B”

Dim.“C”

‘B’ Cabinet 17 1/2 15 7/8 16 1/8‘C’ Cabinet 21 19 3/8 19 5/8‘D’ Cabinet 24 1/2 22 7/8 23 1/8

NOTES:Dimensions shown in inches.

GIBS

ON

– CO

NDEN

SING

UNI

TSCO

MFO

RT-A

IRE

GIBS

ON

– CO

NDEN

SING

UNI

TSGI

BSO

N FU

RNAC

ES




20


A

23 1

/2

C

34 1

/2

22 1/22 3/4

BottomPanel

25 3/822 1/2

17 1

/4

17 7

/8

28

B

19

22 1/2

24 7

/8

15

231 1/4

Front Brace

BOTTOM VIEWTOP VIEW


1


3 1/4

Gas (Ø 1 5/8)


Vent pipe(Ø 3”)

Cond. (Ø 1 1/16)

T-stat(Ø 7/8)

Electric(Ø 7/8)

Gas(Ø 1 5/8)


Vent pipe(Ø 3”)

Combustion Air

FRONT VIEW

FLANGES

*TC 95.1% Furnace

Cabinet Size

Dim. “A”

Dim.“B”

Dim.“C”

‘B’ Cabinet 17 1/2 15 7/8 16 1/8‘C’ Cabinet 21 19 3/8 19 5/8‘D’ Cabinet 24 1/2 22 7/8 23 1/8

NOTES:Dimensions shown in inches.

TWO STAGEFIXED SPEED ECMCondensing UpflowHorizontal Units

GAS FURNACE DIMENSIONS

KG7T 95.1% Upflow/Horizontal Series

GIBSON KG7T (C and L Series)


GIBS

ON

FURN

ACES


95.1% AFUE Furnaces

AIRFLO

W

12345678

BurnerAssembly

FinishFlange

FlameSensor

Igniter

Roll-OutSwitch

Gas ValveFurnace Control Board

Pressure Switches(Condensate)

Transformer

Motor Control Board

Blower Assembly

Motor Choke(C & D cabinets only)

Blower Door Switch

Inducer Assembly

Pressure Switches(Inducer)

Motor Control Box

Inducer Limit SwitchMain Air Limit Switch

21


GIBS

ON

– CO

NDEN

SING

UNI

TS


Gas Furnaces


96% & 97% AFUETWO-STAGE WITH ECMThe Only Residential Gas Furnace, Proudly Made in Canada

• Innovative Heating Solutions Made in Canada• 92, 95.3 - 97.1% AFUE, 2-Stage Variable Motor• C96 & C97 Meets OPA Rebate Criteria

CONTINENTAL C96 & C97 SERIES Features and Benefits

CABINET DIMENSIONS (in.) INPUT OUTPUT CFM

AFUE MOTORS WIDTH DEPTH HEIGHTHIGH FIRE

LOW FIRE

HIGH FIRE

LOW FIRE

MAX MIN

C97 SeriesCTV060T3A 97.1% 1/2hp ECM 2.3 17-1/2 31 32-7/8 60,000 35,000 58,260 34,956 1125 600

CTV080T3A 97% 1/2hp ECM 2.3 17-1/2 31 32-7/8 80,000 48,000 77,600 46,560 1125 800

C96 Series

CPV045T2A 95.3% 1/3hp ECM 2.3 17-1/2 29-1/2 32-7/8 45,000 27,000 42,885 25,730 950 600

CPV060T3A 95.3% 1/2hp ECM 2.3 17-1/2 29-1/2 32-7/8 60,000 35,000 57,180 34,308 1125 600

CPV080T3A 95.3% 1/2hp ECM 2.3 17-1/2 29-1/2 32-7/8 80,000 48,000 76,240 45,744 1125 600

CPV100T5A 96% 3/4hp ECM 2.3 22-1/2 29-1/2 32-7/8 100,000 60,000 96,000 57,600 1875 750

CPV120T5A 95.3% 1hp ECM 2.3 22-1/2 29-1/2 32-7/8 120,000 72,000 114,360 68,616 1875 750

EFFICIENCY (AFUE)

2-STAGESUREVIEW WINDOW

ECM 2.3 MOTOR

PRIMARY ALUMINIZED

HEAT EXCHANGER

PRIMARY STAINLESS

STEEL HEAT EXCHANGER

SECONDARY STAINLESS

STEEL HEAT EXCHANGER

LED SERVICE LIGHTS

OPTIONAL UV LIGHT

AIR PURIFIER

WHISPER QUIET/

INSULATED CABINET

MADE IN CANADA

C97 Series 97%

C96 Series 96%

COM

FORT

-AIR

EGI

BSO

N –

COND

ENSI

NG U

NITS

GIBS

ON

FURN

ACES

GIBS

ON

– CO

NDEN

SING

UNI

TSCO

MFO

RT-A

IRE

GIBS

ON

– CO

NDEN

SING

UNI

TSGI

BSO

N FU

RNAC

ESGI

BSO

N –

COND

ENSI

NG U

NITS

COM

FORT

-AIR

EGI

BSO

N –

COND

ENSI

NG U

NITS

GIBS

ON

FURN

ACES

GIBS

ON

– CO

NDEN

SING

UNI

TSCO

MFO

RT-A

IRE

GIBS

ON

– CO

NDEN

SING

UNI

TSCO

NTIN

ENTA

L FU

RNAC

ES

C96 Series96% AFUE

C97 Series97% AFUE

W415-1005_CONT_IOM_e_draft.indd - W415-1005_CONT 2STG FU... http://www.napoleonproducts.com/downloads/continental-hvac/manuals...

7 of 68 3/4/2013 10:26 AM

TOP

LEFT SIDE

INPUTK/Btu/hr

WidthA

DepthB

HeightC

Supply Air(F x G)

Return Air(D x E)

45 17-1/2 29-1/2 32-7/8 16 x 19-1/2 14 x 22

60 17-1/2 29-1/2 32-7/8 16 x 19-1/2 14 x 22

80 17-1/2 29-1/2 32-7/8 16 x 19-1/2 14 x 22

100 22-1/2 29-1/2 32-7/8 21-1/2 x 19-1/2 14 x 22

120 22-1/2 29-1/2 32-7/8 16 x 19-1/2 14 x 22

DIM

ENSI

ON

S (IN

.)

RIGHT SIDE

Ask your Marks Supply Rep for technical info on the C92, C95, C96 and C97 Series Furnaces


Lifetime – Heat Exchanger** Consumer Product Registration Required


22

http://continentalheatingandcooling.com/products/c97/

http://continentalheatingandcooling.com/products/9600-series/


ADP

AIR

HAND

LERS

/ UN

IT H

EATE

RS


Gas Fireplaces

INPUTK/Btu/hr

WidthA

DepthB

HeightC

Supply Air(F x G)

Return Air(D x E)

45 17-1/2 29-1/2 32-7/8 16 x 19-1/2 14 x 22

60 17-1/2 29-1/2 32-7/8 16 x 19-1/2 14 x 22

80 17-1/2 29-1/2 32-7/8 16 x 19-1/2 14 x 22

100 22-1/2 29-1/2 32-7/8 21-1/2 x 19-1/2 14 x 22

120 22-1/2 29-1/2 32-7/8 16 x 19-1/2 14 x 22


CONT

INEN

TAL

FIRE

PLAC

ES


Ask about our other in-stock models!

Wall Hanging Fireplace with trendy wall hanging design

450 sq. in. viewing area (30 x 15”)

Electronic ignition with battery backup comes standard

Exclusive Topaz CRYSTALINETM ember bed

Available with rear direct venting

CWHD31

WALL HANGING FIREPLACE

1,193 sq. in. viewing area with clean, contemporary design

Electronic ignition standard, available with direct rear venting

Exclusive PHAZER® glowing log set with charcoal and glowing embers

Switch our log set with the optional River Rock media tray

CHD46

736 sq. in. viewing area (41.5 x 17.75”)

Exclusive Topaz CRYSTALINETM ember bed

Clean, contemporary design


CLHD45

BCDV36CF

615 sq. in. viewing area

Exclusive PHAZER® glowing log set with charcoal and glowing embers

Switch our log set with the optional River Rock media tray

BCDV36CF

Massive 1,000 sq. in. viewing area

Available as a See-Thru or Three-Sided Peninsula model

Features a log burner or a linear topaz glass burner


CHD4NEW

SPECIAL

ORDER

Continental Gas FireplacesLuxurious warmth with style!

23

http://www.continentalfireplaces.com/continental_fireplace_stove_insert_brochures/gas_fireplaces_brochure/gas_fireplaces_brochure.html

INDO

OR

AIR

QUA

LITY


Ventilation


VHR100R Heat Recovery Ventilator

• 5”(125mm)ovalductconnectionswithintegratedairflowmeasurement

• Removablescrewterminalforeasyconnection

• Lightweight:Only39lbs(17.7kg)includingcore

• Supercompactsize• Topportdesignfitsintightspaces• IncludesEZ-Mountwallbracket• Aluminumheatrecoverycore• Multiplespeedoperation• Internalrecirculationdefrost

Proper Ventilation isaneverydayneed

Heat Recovery Ventilators Dryer Boosters Inline Fans

SHR6904SHR6905R

SHR11004SHR11005R

SHR8004SHR14104

SHR8005RSHR14105R

Light Commercial Heat Recovery Ventilators

VHR1404VHR2004

SHR1504SHR2004

Flex100H VHR70R DBF4XLT FG-EC

Eco-Touch™ProgrammableTouchScreen Wall Control

• Indoorrelativehumiditydisplay• Preferencesfordesiredindoor

relativehumidity• ECOModewillautomatically

choosethebestoperatingsettingsbasedonthehome’scurrentconditions

• LCDbacklittouchscreen• Ventilationmovementisdisplayed

onscreen• Nobatterytoreplace

Mark Supply Guide.indd 1 2/24/2014 9:26:28 AM

INDO

OR

AIR

QUA

LITY

MEETS ONTARIO BUILDING CODE

SPECIAL ORDER

24

http://residential.fantech.net/residential-products/indoor-air-quality/


INDO

OR

AIR

QUA

LITY


Ventilators and Filters 25

https://panasonic.ca/english/ventilationfans/whisperceiling.asp

https://panasonic.ca/english/ventilationfans/whispersense.asp

https://panasonic.ca/english/ventilationfans/whisperfit.asp


Humidifiers and Ventilators


HE225 WHOLE-HOUSE BYPASS HUMIDIFIER

Universal Parts Buyers Guide is Now Available!

In stock universal HVAC parts, tools and consumables at our eight locations.

Universal Parts Buyers Guide

Parts Now

INDO

OR

AIR

QUA

LITY

MODEL DESCRIPTION

HE40-6501 16” X 25” X 1” PLEATED FILTER

16” X 25” X 4” EPHC PLEATED FILTER

JOIL1636 16” X 35.5” JOIST

16” X 25” X 4” EXTERNAL FISHLOCK

GF-12880 MEDIA REPLACEMENT FILTER FOR SPACEGAUARD 2200 & 2250

GF-13156 MEDIA REPLACEMENT FILTER FOR SPACEGUARD 2400

MEDIA FILTERS

HUMIDIFIERS

26

http://www.forwardthinking.honeywell.com/products/humidification/humidification_products.html

http://www.cgfproducts.com/catalog/GeneralAire-IAQ-Products/Humidifiers-Legacy/Model-1042LH-DME-DMM/


Honeywell Refrigerant Guide

REFR

IGER

ANTS

R

MODEL DESCRIPTION

HE40-6501 16” X 25” X 1” PLEATED FILTER

16” X 25” X 4” EPHC PLEATED FILTER

JOIL1636 16” X 35.5” JOIST

16” X 25” X 4” EXTERNAL FISHLOCK

GF-12880 MEDIA REPLACEMENT FILTER FOR SPACEGAUARD 2200 & 2250

GF-13156 MEDIA REPLACEMENT FILTER FOR SPACEGUARD 2400

27

http://www.honeywell-refrigerants.com/americas/

SECT

ION

markssupply.net • Marks Supply • HVAC Buyers Guide • Spring/Summer 2014

CONT

ROLS

• Selectable to 5-1-1 (Weekdays, Saturday, Sunday) or 5-2 (Weekdays, Weekend)

• Adaptive Intelligent RecoveryTM

• Temperature Range Stops

HONEYWELL • TH6110D1021FOCUS PRO 6000 SERIES

Honeywell 6300-Series Programmable FocusProWi-Fi Thermostat

TH6320WF1005 3H/2C7-day programming Multi-Stage WiFi EnabledLargest backlit display in its class

Honeywell 8300-Series Programmable VisionProWi-Fi Thermostat

TH8320WF1029 3H/2C3 Heat, 2 Cool Zones, Energy SavingWiFi Enabled, 7-Day ProgrammingRemote Access and Control

Ask your rep on how to join Honeywell’s Loyalty Program (Contractor Pro)

Honeywell 1000-Series Non-Programmable Thermostat

TH1110DH1003 1H/1C

1 Heat, 1 Cool Zone Auto-On Fan

Wi-Fi Thermostats

Controls

markssupply.net • Marks Supply • HVAC Product Buyers Guide markssupply.net •

28

http://www.forwardthinking.honeywell.com/products/thermostats/thermostat_products.html

Spring/Summer 2014 • HVAC Buyers Guide • Marks Supply • Celebrating 50+ Years

CONT

ROLS

29

• Universal Staging • 24-Volt or Millivolt

• 7-Day or 5+1+1 Day Programmable or Non-Programmable Thermostat

• Multistage 2 Heat/2 Cool or Heat Pump 3 Heat/2 Cool

WHITE-RODGERS • 1F95-127790 SERIES+ BLUE TOUCHSCREEN

The All-New VisionPRO® 8000

• Works in virtually any residential or light commercial setting• Three flexible ways to install, solving a variety of wiring issues• Plain language, on-screen setup helps reduce install errors• On-screen dealer information displays with customizable alerts

PRESTIGE IAQ COMFORT SYSTEMS

• Residential or Light Commercial Use• Diagnostics and selectable staging options• Customizable service reminders• Up to 4H/2C Heat Pump or 3H/2C Conventional• Work with RedLINK accessories

NEW PRODUCTS ADDED TO INVENTORY

Controls


29

http://www.forwardthinking.honeywell.com/products/thermostats/thermostat_products.html

http://www.emersonclimate.com/EN-US/PRODUCTS/THERMOSTATS/Pages/thermostats.aspx

SECT

ION


Commercial HVAC


CONT

INEN

TAL

FIRE

PLAC

ESIN

DOO

R AI

R Q

UALI

TYCO

NTIN

ENTA

L FI

REPL

ACES

COM

MER

CIAL

HVA

C

Marks Supply is your source for reliable and cost-effective fabricated spiral duct and fittings.G90 & PVC Galvanized Steel • Stainless Steel • Satin • 4 - 48” diam.

30

http://www.goodmanmfg.com/CommercialProducts/PackagedUnits/nbspnbspnbsp3to6Ton/tabid/1297/Default.aspx

HVAC Product Buyers Guide • Marks Supply • Celebrating 50+ Years • Celebrating 50+ Years • Celebrating 50+ Years

Commercial HVAC

WallMuraux

Tube AxialHélicoïdes Tubulaires

R

S LC L2/L3 GED/GSD CWD DDT

Spun Aluminum Roof TopVentilateurs de toit en aluminium repoussé

oof TopVentilateurs de toit

ARE/ARS TXD TXB DB eRED/RED LPD

HRSB TUB UBB/UBS/UBX KSF TH

T

S & P C a n a d aWORLD CLASS VENTILATION TECHNOLOGY

ECHNOLOGIE DE VENTILATION DE NIVEAU INTERNATIONAL

QUICK REFERENCE GUIDE DE REFERENCE

CSF

TDB

COM

MER

CIAL

HVA

C

31

http://www.airmanagementinc.ca/

http://www.solerpalaucanada.com/

SECT

ION

Milwaukee


CONT

INEN

TAL

FIRE

PLAC

ESIN

DOO

R AI

R Q

UALI

TYCO

NTIN

ENTA

L FI

REPL

ACES

COM

MER

CIAL

HVA

CSE

CTIO

NCO

NTIN

ENTA

L FI

REPL

ACES

INDO

OR

AIR

QUA

LITY

CONT

INEN

TAL

FIRE

PLAC

ESIN

STAL

LATI

ON

ITEM

S &

TO

OLS

48-22-0305 - Milwaukee Folding Jab Saw

48-22-0223 - Milwaukee PVC/ABS Hand Saw

49-22-4145 - Milwaukee 10-pc Plumbers Ice Hardened™ Hole Saw Kit

49-22-4155- Milwaukee 18-pc Master Plumbers Ice Hardened™ Hole Saw Kit

49-56-9080 - Milwaukee 8 Pc Plumbers Big Hawg® Hole Cutter Kit

DESCRIPTION1" Ice Hardened™ Hole Saw1-1/4" Ice Hardened™ Hole Saw1-3/8" Ice Hardened™ Hole Saw1-1/2" Ice Hardened™ Hole Saw1-3/4" Ice Hardened™ Hole Saw2" Ice Hardened™ Hole Saw2-1/8" Ice Hardened™ Hole Saw2-1/4" Ice Hardened™ Hole Saw2-1/2" Ice Hardened™ Hole Saw

PART #49-56-004349-56-006249-56-007249-56-008249-56-010249-56-011749-56-012749-56-013249-56-0147

DESCRIPTION2-5/8" Ice Hardened™ Hole Saw2-3/4" Ice Hardened™ Hole Saw3" Ice Hardened™ Hole Saw3-1/4" Ice Hardened™ Hole Saw3-5/8" Ice Hardened™ Hole Saw4" Ice Hardened™ Hole Saw4-1/8" Ice Hardened™ Hole Saw4-3/4" Ice Hardened™ Hole Saw

PART #49-56-015849-56-016349-56-017349-56-018349-56-019749-56-021349-56-021749-56-0237

ICE HARDENED™HOLE SAWS & KITS

49-22-0030 - Milwaukee 3-Piece Selfeed Bit Plumbers Set

48-43-0610 - Milwaukee 12" 18 TPI Hack Saw Blade



48-42-2311 - Milwaukee Jig Saw Blade Bi-Metal 10 Teeth per Inch 4" Length

48-42-0421 - Milwaukee Jig Saw Blade High Carbon Steel 6 Teeth per Inch 4" Length

48-42-0640 - Milwaukee Jig Saw Blade High Carbon Steel 10 Teeth per Inch 4" Length

48-22-0012 - Milwaukee Compact Hack Saw

TXV

33 WWW.MARKSSUPPLY.NET Images of product shown may not be an accurate representation of actual product sold. Marks Supply reserves the right to substitute illustrated product without notice.

TOOLS & INSTRUMENTS


INST

ALLA

TIO

N IT

EMS

& T

OO

LS32

http://www.milwaukeetool.com/

• Celebrating 50+ Years • Celebrating 50+ Years

Milwaukee

MARKS SUPPLY INC. • FALL 2012 34

48-28-1040 - Milwaukee 12" x 7/16" Universal QUIK-LOK™ Extension

49-56-8000 - Milwaukee 1/4" x 4" High Speed Steel Pilot Bit

49-56-7055 - Milwaukee Large Quick Change Arbor, 7/16"

49-56-7010 - Milwaukee Small Arbor, 3/8"

DESCRIPTION6" 5 TPI The Ax™ Sawzall® Blade (5 Pk)9" 5 TPI The Ax™ Sawzall® Blade (5 Pk)12" 5 TPI The Ax™ Sawzall® Blade (5 Pk)9" 8 TPI The Wrecker™ Sawzall® Blade (5 Pk)6" 5 TPI Sawzall® Blades (5 Pk)9" 5 TPI Sawzall® Blades (5 Pk)12" 5 TPI Sawzall® Blades (5 Pk)Rough-In Sawzall® Blade (5 Pk)6" 14 TPI Sawzall® Blades (5 Pk)6" 18 TPI Sawzall® Blades (5 Pk)9" 18 TPI Sawzall® Blades (5 Pk)12" 18 TPI Sawzall® Blades (5 Pk)6" 24 TPI Sawzall® Blades (5 Pk)8" 10/14 TPI Sawzall® Blades (5 Pk)9" Carbide Grit Sawzall® Blade (3 Pk)9" Diamond Grit The Torch™ Sawzall® Blade6" Diamond Grit The Torch™ Sawzall® Blade

PART #48-00-502148-00-502648-00-502748-00-570648-00-503548-00-503648-00-503748-00-161048-00-518248-00-518448-00-518848-00-518948-00-518648-00-519348-00-143048-00-145048-00-1440

SAWZALL® BLADES

48-25-1002 - Milwaukee 1" Selfeed Bit

48-25-1122 - Milwaukee 1-1/8" Selfeed Bit

48-25-2562 - Milwaukee 2-9/16" Selfeed Bit

48-28-6870 - Milwaukee Feed Screw Coarse Thread

48-89-9110 - Milwaukee Step Drill Bit, 8 Hole, 9/16" to 1" by 1/16" - Hole Enlarging

48-89-9130 - Milwaukee Step Drill Bit, 12 Hole, 3/16" to 7/8" by 1/16"

48-89-8965 - Milwaukee Step Drill Bit, 10 Hole, 13/16" to 1-3/8" by 1/16"

TOOLS & INSTRUMENTS


INST

ALLA

TIO

N IT

EMS

& T

OO

LS


33


SECT

ION

Milwaukee


CONT

INEN

TAL

FIRE

PLAC

ESIN

DOO

R AI

R Q

UALI

TYIN

STAL

LATI

ON

ITEM

S &

TO

OLS

2404-‐22 M12 FUEL™ 1/2" Hammer Drill/Driver Kit Includes: (1) M12 FUEL ½” Hammer Drill/Driver (2404-‐20), (1) M12 RedLithium 2.0 Compact BaJery Pack (48-‐11-‐2420), (1) M12 RedLithium XC 4.0 Extended Capacity BaJery Pack (48-‐11-‐2440), (1) M12 Lithium-‐ion BaJery Charger (48-‐59-‐2401), (1) Belt Clip, (1) Carrying Case

2453-‐22 M12 FUEL™ 1/4" Hex Impact Driver Kit Includes: (1) M12 FUEL ¼” Hex Impact Driver (2453-‐20), (2) M12 RedLithium 2.0 Compact BaJery Pack (48-‐11-‐2420), (1) M12 Lithium-‐ion BaJery Charger (48-‐59-‐2401), (1) Belt Clip, (1) Carrying Case

2604-‐22 M18 FUEL™ 1/2" Hammer Drill/Driver Kit Includes: (1) M18 FUEL ½” Hammer Drill/Driver (2604-‐20), (2) M18 RedLithium XC 4.0 Extended Capacity BaJery Pack (48-‐11-‐1840), (1) M18 & M12 MulX-‐Voltage Charger (48-‐59-‐1812), (1) Carrying Case, (1) Side Handle

2720-‐22 M18 FUEL™ SAWZALL® ReciprocaJng Saw Kit Includes: (1) M18 FUEL Sawzall ReciprocaXng Saw (2720-‐20), (2) M18 RedLithium XC 4.0 Extended Capacity BaJery Pack (48-‐11-‐1840), (1) M18 & M12 MulX-‐Voltage Charger (48-‐59-‐1812), (1) Blade, (1) Carrying Case

2792-‐20 M18™ Jobsite Radio/Charger with Bluetooth Includes: (1) M18 Jobsite Radio/Charger, (1) 16" Auxiliary Input Cord, (2) AAA BaJeries

!

Available at Select Locations!!

New from!

2420-‐22 M12™ HACKZALL® Recip Saw Kit Includes: (1) M12 Hackzall Recip Saw (2420-‐20), (2) M12 RedLithium BaJery (48-‐11-‐2401), (1) M12 Lithium-‐ion BaJery Charger (48-‐59-‐2401), (1) Contractor Bag, (1) Metal Blade, (1) Wood Blade


INST

ALLA

TIO

N IT

EMS

& T

OO

LS34


Milwaukee


A Sampler of Milwaukee Tools – In Stock!

M18 1/2” Compact Impact Wrench with Pin Detent Kit (2652-22)

Sawzall® Reciprocal Saw Kit (6519-31)

1/2” Hole-Hawg® Drill 300/1200 RPM Kit (1676-6)

M12™ Cordless Lithium-Ion PVC Shear Kit (2470-21)

1/2” D-Handle Right Angle Drill Kit (3107-6)

M12™ Cordless Lithium-Ion Copper Tubing Cutter Kit (2471-21)

Powerful 500-RPM motor, cuts 10x faster than conventional cutters

Kit Includes

M12 Cordless Lithium-Ion Copper Tubing Cutter • M12 Redlithium Battery • M12 Lithium-Ion Battery Charger • Carrying Case

Powerful 7A motor, delivers trigger speed control in two ranges + reverse

Kit Includes

1/2” D-Handle Right Angle Drill Kit • 3/16” Socket Wrench • 9/16” Open-End Wrench • RAD Assembly • Side Handle

Powerful motor, cuts up to 2” sched-ule 40 PVC in 3 seconds

Kit Includes

2470 M12 Cordless Lithium-Ion PVC Shear • One (1) 12V Lithium-Ion Battery30-Minute Charger • Carrying Case

Powerful 7.5A motor, delivers 300RPM and 1,200 RPM with reverse

Kit Includes

1/2” Hole-Hawg Drill 300/1200 RPM Kit • Pipe Handle • Carrying Case

Powerful 12A Motor, deliver 0–3,000SPM for high performance

Kit Includes

Sawzall Reciprocal Saw • Carrying Case

Milwaukee 4-Pole Frameless Motor, features a robust design for long life

Kit Includes

M18 1/2” Compact Impact Wrench with Pin • (2) M18 Compact REDLITHIUM Batteries • M18 LIthium-Ion Battery Charger • Carrying Case


INST

ALLA

TIO

N IT

EMS

& T

OO

LS


35


SECT

ION

Yellow JacketCO

NTIN

ENTA

L FI

REPL

ACES

INDO

OR

AIR

QUA

LITY

CONT

INEN

TAL

FIRE

PLAC

ESCO

MM

ERCI

AL H

VAC

SECT

ION

CONT

INEN

TAL

FIRE

PLAC

ESIN

DOO

R AI

R Q

UALI

TYCO

NTIN

ENTA

L FI

REPL

ACES

INST

ALLA

TIO

N IT

EMS

& T

OO

LSSE

CTIO

NCO

NTIN

ENTA

L FI

REPL

ACES

INDO

OR

AIR

QUA

LITY

CONT

INEN

TAL

FIRE

PLAC

ESCO

MM

ERCI

AL H

VAC

SECT

ION

CONT

INEN

TAL

FIRE

PLAC

ESIN

DOO

R AI

R Q

UALI

TYCO

NTIN

ENTA

L FI

REPL

ACES

INST

ALLA

TIO

N IT

EMS

& T

OO

LSIN

STAL

LATI

ON

ITEM

S &

TO

OLS


36

http://www.yellowjacket.com/


UEI


Marks Supply has recently stocked up on HVAC parts!

We stock all the HVAC parts you need, when you need them.

Ask your rep for a copy of the “Parts Now’ Buyers Guide today!




Parts Now

DID YOU KNOW?

INST

ALLA

TIO

N IT

EMS

& T

OO

LS


37

http://www.ueitest.com/

SECT

ION

MalcoIN

STAL

LATI

ON

ITEM

S &

TO

OLS

DB1 DEAD BLOW HAMMER

M2001 / M2002M2001 • Max2000 AVIATION SNIPS (LEFT)M2002 • Max2000 AVIATION SNIPS (RIGHT)

C5R5-BLADE CRIMPER

A1 / A3A1 • 7/32” SCRATCH AWL A3 • 3/8” SCRATCH AWL

SH3 18 oz. LEATHER GRIPPED SHEET METAL HAMMER

M2005 Max2000 BULLDOG SNIP

S2R HAND SEAMERS WITH FORGED STEEL JAWS

CDR DUCT RIPPER

RH4 12 oz. LEATHER GRIPPED SHEET METAL HAMMER

M2006 / M2007M2006 • Max2000 OFFSET AVIATION SNIPS (L)M2007 • Max2000 OFFSET AVIATION SNIPS (R)

PC1 / PT1PC1 • PEX TO WIRE CLIPS TOOL PT1 • PEX TO WIRE TOOL

HHD-SERIES MAGNETIC HEX DRIVERS1/4” – HHD1T, HHD1 • 5/16” – HHD2T, HHD23/8” – HHD3T, HHD3

BHE10 / BHE6BHE10 • 10” POWER DRIVER EXTENSIONBHE6 • 6” POWER DRIVER EXTENSION

12F / 18F / 24F FOLDING TOOL (12”/18”/24”)

WT9SG

T HANDLE HEX KEY

HC1 2” – 2” HOLE CUTTER

INST

ALLA

TIO

N IT

EMS

& T

OO

LS


38

http://malcoproducts.com/


Turbo Torch

It’s called

Professional Grade for a reason.

TurboTorch X-3BTorch Kit Swirl, for B-Tank, Air Acetylene (X-3B)

TurboTorch 245-03PRegulator, NitrogenDOT/TC-Certified

TurboTorch X-3BTorch Kit Swirl, MAP-PRO/LP Gas, Deluxe Portable Torch Kit, DOT/TC Certified (PL-DLXPT)

TurboTorch TDLX2003MCTorch Kit Kit with Metal Tote(0426-0111)

TurboTorch TX500Torch Swirl, MAP-PRO/LP Gas, Self-Lighting

TurboTorch 0386-0835High Heat Kit with Self Light Tip(Tank Holder sold separately)(PL-8ADLX-B)

TurboTorch TX503Torch Swirl, MAP-PRO/LP Gas, Self-Lighting

TurboTorch 0916-0122CMT-2 14.1 OZ MAP-PRO Gas Cylinder (Disposable Tank)

Marks Supply carries a wide selection of TurboTorch equipment.


BHE10 / BHE6BHE10 • 10” POWER DRIVER EXTENSIONBHE6 • 6” POWER DRIVER EXTENSION

12F / 18F / 24F FOLDING TOOL (12”/18”/24”)

WT9SG

T HANDLE HEX KEY

HC1 2” – 2” HOLE CUTTER

INST

ALLA

TIO

N IT

EMS

& T

OO

LS


39

http://www.victortechnologies.com/turbotorch

Subsection Heading

BURLINGTON

MISSISSAUGA

LONDON NIAGARA FALLS

GUELPH

KITCHENER

OWEN SOUND

KINCARDINE

GODERICH

ALLISTON

WOODSTOCKHAMILTON

NANTICOKE

CHATHAM

SARNIA

TOBERMORY

COLLINGWOOD

GRAVENHURST

AURORA

BARRIE

TORONTO

BRANTFORD

WINDSOR

Rely on our experienceTake advantage of our over 50 years of proven track record in the industry. Our highly trained, knowledgeable product specialists are only one phone call or click away, ready and waiting to save you time and money.

Eight locationsWith eight convenient locations to choose from,

you are never far away from what you need.Special order parts always come with

reliable delivery dates, and our fleet of delivery trucks will get them there on time!

Servicing all of Southern OntarioBurlington • Niagara Falls

Windsor • London • BrantfordKitchener • Guelph • Mississauga

HVAC Spring Buyers Guide. Copyright 2014 Marks Supply.

Kitchener • 300 Arnold Street • 1.888.578.5761Guelph • 55 Arrow Road • 1.800.661.1060Brantford • 590 Elgin Street • 1.800.265.0703Burlington • 3424 Landmark Road • 1.800.387.7125Niagara Falls • 4735 Kent Avenue • 1.800.308.1688London • 1050 Elias Street • 1.800.265.5964Windsor • 3235 Jefferson Blvd. • 1.866.655.0008Mississauga • 1119 Matheson Blvd. E. • 1.855.210.6285

Wide Assortment of Universal HVAC Parts Available at Our Eight Convenient Locations!


Get your copy today in-store !



Parts Now


hvac buyers’ guide - marks supply · 2020-04-25 · gibson – condensing units marks supply •...

Documents