huong dan lap dat & cai dat thong so cho bien tan siemens mm420

Ti liu cho ngi lp my

MICROMASTER 420 0.12 kW 11 kW

Hng dn vn hnh Thng 04/04

Cnh bo, Lu v Ch Thng 07/04

2 MICROMASTER 420 Hng dn vn hnh (Bn rt gn)

Cnh bo, lu v ch

Cc cnh bo, lu v ch c a ra m bo an ton cho ngi s dng v trnh h hi cho sn phm hoc cc b phn ca thit b c ni. Cc cnh bo, lu v ch c th p dng cho tng hot ng c lit k phn u ca cc chng lin quan v c nhc li hoc b sung ti cc phn quan trng trong cc chng ny. Hy c thng tin cn thn, v n gip bo v an ton cho chnh ngi s dng v cng s gip ko di tui th ca b bin tn MICROMASTER 420 v cc thit b i km. CNH BO Thit b ny c mc in p nguy him v iu khin cc b phn c kh quay c nguy

him cao. Nu khng tun theo cc cnh bo hoc khng thc hin theo cc hng dn trong ti liu ny th s nh hng n tui th ca my, gy nguy him cho ngi s dng hoc thit hi ln v ti sn.

Ch ngi no c trnh chuyn mn ph hp mi c vn hnh thit b ny, v ch sau khi nm c tt c cc ch an ton, cc quy trnh ci t, vn hnh v bo dng trong ti liu ny. vn hnh c thit b tt v an ton ph thuc vo vic thao tc, lp t, vn hnh v bo dng hp l.

T trn mch lc vn cn in trong vng 5 pht sau khi tt ngun nn khng c php m thit b trong khong thi gian ny. Cc t in t phng in trong khong thi gian ny.

Thit b ny c kh nng bo v qu ti ng c theo UL508C phn 42. Hy xem thng s P0610 (mc 3) v P0335. Cng c th bo v qu ti ng c bng PTC bn ngoi thng qua u vo s.

Thit b ny dng ph hp trong mch c dng khng qu 10000 A, in p ln nht 230 V / 460V khi c bo v bi cc cu ch loi H hoc K, p-t-mt hoc b iu khin ng c c bo v.

Ch dng dy ng Loi 1 60/75 oC c tit din c ghi c th trong ti liu hng dn vn hnh.

Cc u vo chnh, DC v cc u ni ng c c th c in p nguy him ngay c khi bin tn khng hot ng. Lun lun ch 5 pht thit b phng ht in sau khi tt ngun trc khi thc hin bt k ci t no.

CH Hy c cc hng dn an ton, cc cnh bo v tt c cc nhn cnh bo gn trn thit b

cn thn trc khi thc hin lp t v ci t. Hy gi tt c cc nhn cnh bo cn thn c th d dng c c v hy thay cc nhn

b mt hoc b hng. Nhit mi trng xung quanh cho php ln nht l 500C.

Mc lc Thng 07/04

MICROMASTER 420 3 Hng dn vn hnh (Bn rt gn)

Mc lc 1 Lp t c kh........................................................................................................................... 4 1.1 Khong cch lp t ...................................................................................................................4 1.2 Kch thc lp t.......................................................................................................................4 2 Lp t phn in .................................................................................................................... 5 2.1 Cc thng s k thut ..................................................................................................................5 2.2 Cc u ni mch lc .................................................................................................................6 2.3 Cc u dy iu khin...............................................................................................................6 2.4 S nguyn l ..........................................................................................................................8 3 Ci t mc nh ...................................................................................................................... 9 3.1 Kho chuyn i DIP 50/60 HZ ..................................................................................................9 4 Truyn thng .......................................................................................................................... 10 4.1 Thit lp truyn thng MICROMASTER 420 Phn mm STARTER.................................. 10 4.2 Thit lp truyn thng MICROMASTER 420 AOP.............................................................. 10 4.3 Giao din BUS (CB) ................................................................................................................. 11 5 BOP/AOP (Tu chn) ............................................................................................................. 12 5.1 Cc nt v cc chc nng ....................................................................................................... 12 5.2 Thay i cc thng s .............................................................................................................. 13 6 Ci t thng s ..................................................................................................................... 14 6.1 Ci t thng s nhanh............................................................................................................ 14 6.2 Ci t ng dng ..................................................................................................................... 16 6.2.1 Giao din ni tip USS............................................................................................................. 16 6.2.2 Chn ngun lnh...................................................................................................................... 17 6.2.3 u vo s (DIN) ..................................................................................................................... 17 6.2.4 Cc u ra s (DOUT) ............................................................................................................. 18 6.2.5 Chn gi tr im t tn s ..................................................................................................... 18 6.2.6 u vo tng t (ADC).......................................................................................................... 19 6.2.7 u ra tng t (DAC) ............................................................................................................ 19 6.2.8 Chit p xung (MOP) ............................................................................................................... 20 6.2.9 Tn s c nh (FF).................................................................................................................. 21 6.2.10 Chy nhp................................................................................................................................ 22 6.2.11 B pht hm to dc (RFG)................................................................................................ 22 6.2.12 Cc tn s quy chiu / gii hn ............................................................................................... 23 6.2.13 iu khin ng c .................................................................................................................. 23 6.2.14 Bo v bin tn / ng c ........................................................................................................ 24 6.2.15 Cc chc nng c bit ca bin tn ...................................................................................... 25 6.2.15.1 Khi ng bm......................................................................................................................... 25 6.2.15.2 T khi ng............................................................................................................................ 25 6.2.15.3 Phanh hm c kh ca ng c............................................................................................... 26 6.2.15.4 Hm mt chiu (DC) ................................................................................................................ 26 6.2.15.5 Hm hn hp ........................................................................................................................... 26 6.2.15.6 B iu khin Vdc .................................................................................................................... 26 6.2.15.7 B iu khin PID .................................................................................................................... 27 6.3 Ci t ni tip ......................................................................................................................... 28 6.4 Ci t li cc thng s mc nh ............................................................................................ 28 7 Cc ch hin th v cnh bo .......................................................................................... 29 7.1 Hin th trng thi LED............................................................................................................. 29 7.2 Cc thng bo li v cnh bo ................................................................................................ 29 8 Danh mc cc thut ng vit tt .......................................................................................... 30

Thng 07/04 1 Lp t c kh

MICROMASTER 420 Hng dn vn hnh (Bn rt gn)

4

1 Lp t c kh 1.1 Khong cch lp t

Cc b bin tn c th c lp k nhau. Trong t iu khin, nu lp cc b bin tn thnh cc hng theo chiu thng ng, th phi c khong cch thng gi l 100mm.

1.2 Kch thc lp t

Hnh 1-2 Cc kch thc lp t

Kch thc l khoan Mmen xit H W Bulng Nm C

v mm mm A 160 - 2xM4 B 174 138 4xM4

C 204 174 4xM4 2,5

Mt

bn

ca

t

in

Mt

bn

ca

t

in

2 Lp t phn in Thng 07/04


5

2 Lp t phn in 2.1 Cc thng s k thut Di in p u vo 1 AC 200 V- 240 V

2AB 11 12 13 15 17 21 21 22 23 M hiu t hng 6SE6420- 2UC 2AA1 5AA1 7AA1 5AA1 5AA1 1BA1 5BA1 2BA1 0CA1 C v A B C Cng sut ra nh mc [kW] 0,12 0,25 0,37 0,55 0,75 1,1 1,5 2,2 3,0 Dng in vo [A] 1,4 2,7 3,7 5,0 6,6 9,6 13,0 17,6 23,7 Dng in ra [A] 0,9 1,7 2,3 3,0 3,9 5,5 7,4 10,4 13,6

[A] 10 10 10 10 16 20 20 25 32 Cu ch Khuyn co loi 3NA 3803 3803 3803 3803 3805 3807 3807 3810 3812 Tit din cp u vo [mm2] 1,0-2,5 1,0-2,5 1,0-2,5 1,0-2,5 1,0-2,5 2,5-6,0 2,5-6,0 4,0-6,0 6,0-10Tit din cp u ra [mm2] 1,0-2,5 1,0-2,5 1,0-2,5 1,0-2,5 1,0-2,5 1,0-6,0 1,0-6,0 1,0-6,0 1,5-10Mmen xit cho cc u mch lc

[Nm] 1,1 1,5 2,25

Di in p u vo 3AC 200 V- 240 V

2AC 11- 12- 13- 15- 17- 21- 21- 22 23- 24- 25 M hiu t hng 6SE6420- 2UC 2AA1 5AA1 7AA1 5AA1 5AA1 1BA1 5BA1 2BA1 0CA1 0CA1 5CA1 C v A B C Cng sut ra nh mc [kW] 0,12 0,25 0,37 0,55 0,75 1,1 1,5 2,2 3,0 4,0 5,5 Dng in vo [A] 0,6 1,1 1,6 2,1 2,9 4,1 5,6 7,6 10,5 13,1 17,5 Dng in ra [A] 0,9 1,7 2,3 3,0 3,9 5,5 7,4 10,4 13,6 17,5 22,0

[A] 10 10 10 10 10 16 16 20 25 32 35 Cu ch Khuyn co loi 3NA 3803 3803 3803 3803 3803 3805 3805 3807 3810 3812 3814 Tit din cp u vo [mm2] 1,0-2,5 1,0-2,51,0-2,51,0-2,51,0-2,51,0-6,01,0-6,0 1,0-6,0 2,5-10 2,5-10 4,0-10Tit din cp u ra [mm2] 1,0-2,5 1,0-2,51,0-2,51,0-2,51,0-2,51,0-6,01,0-6,0 1,0-6,0 1,5-10 2,5-10 4,0-10Mmen xit cho cc u mch lc

[Nm] 1,1 1,5 2,25

Di in p u vo 3AC 380 V- 480 V

2AD 13- 15- 17- 21- 21- 22 23- 24 25- 27- 31 M hiu t hng 6SE6420- 2UD 7AA1 5AA1 5AA1 1AA1 5AA1 2BA1 0BA1 0BA1 5CA1 5CA1 1CA1 C v A B C Cng sut ra nh mc [kW] 0,37 0,55 0,75 1,1 1,5 2,2 3,0 4,0 5,5 7,5 11,0 Dng in vo [A] 1,1 1,4 1,9 2,8 3,9 5,0 6,7 8,5 11,6 15,4 22,5 Dng in ra [A] 1,2 1,6 2,1 3,0 4,0 5,9 7,7 10,2 13,2 19,0 26,0

[A] 10 10 10 10 10 16 16 20 20 25 32 Cu ch Khuyn co loi 3NA 3803 3803 3803 3803 3803 3805 3805 3807 3807 3810 3814 Tit din cp u vo [mm2] 1,0-2,5 1,0-2,51,0-2,51,0-2,51,0-2,51,0-6,01,0-6,0 1,5-6,0 2,5-10 4,0-10 6,0-10Tit din cp u ra [mm2] 1,0-2,5 1,0-2,51,0-2,51,0-2,51,0-2,51,0-6,01,0-6,0 1,0-6,0 1,5-10 2,5-10 4,0-10Mmen xit cho cc u mch lc

[Nm] 1,1 1,5 2,25

Thng 07/04 2 Lp t phn in


6

2.2 Cc u ni mch lc C th tip cn vi cc u ni ngun in vo v cc u ni ca ng c bng cch tho cc phn v my pha trc.

Hnh 2-1 Tho phn mt trc v

Hnh 2-1 Tho phn mt trc v my

Hnh 2-2 Cc u mch lc

2.3 Cc u dy iu khin u dy K hiu Chc nng 1 - u ngun ra +10V 2 - u ngun ra 0V 3 ADC+ u vo tng t (+) 4 ADC- u vo tng t (-) 5 DIN1 u vo s s 1 6 DIN2 u vo s s 2 7 DIN3 u vo s s 3 8 - u ra cch ly +24V/max. 100 mA 9 - u ra cch ly 0V/max. 100 mA 10 RL1-B u ra s / tip im NO 11 RL1-C u ra s / chn chung 12 DAC+ u ra tng t (+) 13 DAC- u ra tng t (-) 14 P+ Cng RS485 15 N- Cng RS485

Ni v tho SDP (BOP/AOP)

y phn v cc u ni xung

2 Lp t phn in Thng 07/04


7

2.4 S nguyn l Hnh 2-3 S nguyn l ca b bin tn

ti thun tr ti cm R le

Mch vo tng t c th c thay i to ra mt u vo

s b sung (DIN4)

ng truyn COM

T ng

u ra +24V max.100mA (cch ly) u ra 0V max.100mA (cch ly)

B

u ni in p

mt chiuDC-link

Kho chuyn mch DIP

ng truyn BOP

Ngun ngoi 24V

Thng 07/04 3 Ci t mc nh


8

3 Ci t mc nh B bin tn MCROMASTER 420 c ci t mc nh khi xut xng sao cho c th vn hnh c m khng cn ci t thm bt k thng s no na. t c iu ny, cc thng s ca ng c c kt ni vi bin tn phi c thng s nh mc ph hp vi thng s ci t mc nh (P0304, P0305, P0307, P0310) tng ng vi ng c 1LA7 4 cc ca Siemens (hy xem cc thng s nh mc ghi trn nhn). Cc thng s mc nh khc: Cc ngun lnh P0700 = 2 (u vo s, xem hnh 3-1) Ngun im t P1000 = 2 (u vo tng t, xem hnh 3-1) Ch lm mt ng c

P0335 = 0 Gii hn dng in

P0640 = 150% Tn s nh nht

P1080 = 0 Hz Tn s ln nht

P1082 = 50 Hz Thi gian tng tc

P1120 = 10 s Thi gian gim tc

P1121 = 10 s Ch iu khin

P1300 = 0

u vo/ u ra Cc u ni Thng s Chc nng u vo s s 1 5 P0701 = 1 ON/OFF1 (I/O)

u vo s s 2 6 P0702 = 12 o chiu u vo s s 3 7 P0703 = 9 Xa li u vo s 8 - u vo s ngun

3/4 P1000 =2 Tn s t u vo tng t 1/2 - u vo tng t ngun R le u vo 10/11 P0731= 52.3 Nhn dng mc nh u ra tng t 12/13 P0771 = 21 Tn s u ra

3.1 Kho chuyn i DIP 50/60 HZ Tn s nh mc mc nh cho ng c ca b bin tn MICROMASTER l 50 Hz. i vi ng c c thit k chy tn s nh mc 60Hz, cc b bin tn c th c t tn s ny nh s dng kho chuyn DIP 50/60 Hz.

V tr OFF: cc thng s mc nh ca Chu u (tn s nh mc ca ng c = 50 Hz, cng sut tnh theo kW)

V tr ON: Cc thng s mc nh ca Bc M (tn s nh mc ca ng c = 60 Hz, cng sut tnh theo hp.).

Hnh 3-1 Cc u vo tng t v s

Kho chuyn i DIP 50/60 Hz i vi ch

ci t mc nh

u vo tng t

u vo s

4 Truyn thng Thng 07/04


9

4 Truyn thng 4.1 Thit lp truyn thng MICROMASTER 420 Phn mm STARTER

thit lp cc truyn thng gia phn mm STARTER v MICROMASTER 420, cn c thm cc b phn tu chn di y: B kt ni gia b bin tn vi PC BOP nu nh cc gi tr chun USS ca b bin tn MICROMASTER 420 thay i (xem phn

6.2.1 Giao din ni tip (USS)). B kt ni gia bin tn v PC MICROMASTER 420

Cc ch ci t USS, xem phn 6.2.1 Giao din ni tip (USS)

Phn mm STARTER Vo Menu, chn Option chn Ci t Giao din PG/PC Chn Cng PC COM (USS) Vo Properties chn giao din COM1, chn tc baud (n v tc truyn d liu)

CH : Cc thng s ci t USS trong b bin tn MICROMASTER 420 phi ph hp vi ch ci t ca phn mm STARTER.

4.2 Thit lp truyn thng MICROMASTER 420 AOP Truyn thng gia AOP v MM420 da trn giao thc USS, tng t nh STARTER v

MM420. Khc vi BOP, cc thng s truyn thng thch hp phi c ci t cho c MM420 v

AOP nu nh qu trnh t ng d tm giao din khng thc hin c (xem bng 4-1). S dng cc thnh phn tu chn, AOP c th c kt ni vi cc giao din truyn thng

khc nhau (xem bng 4-1). Bng 4-1 AOP ti ng truyn BOP AOP ti ng truyn COM

Cc thng s MM420 - tc baud - a ch bus

P2010[1]

-

P2010[0] P2011

Cc thng s AOP - tc baud - a ch bus

P8553

-

P8553 P8552

Tu chn - kt ni trc tip - kt ni gin tip

Khng cn thit c tu chn Ph kin gn cnh t BOP/AOP (6SE6400-0PM00-0AA0)

Khng th Ph kin gn cnh t BOP/AOP (6SE6400-0MD00-0AA0)

Thng 07/04 4 Truyn thng


10

Khi AOP hot ng nh mt b iu khin

Thng s/ u dy AOP trn ng truyn BOP AOP trn ng truyn COM Ngun lnh

P0700 4 5

P1000 1 P1035 2032.13 (2032.D) 2036.13 (2036.D) P1036 2032.14 (2032.E) 2036.14 (2036.E)

im t tn s (MOP)

Tng tn s t MOP

Gim tn s t MOP Xa li

P2104 2032.7 2036.7

Li c th c gii tr thng qua AOP m khng ph thuc vo P0700 hoc P1000.

4.3 Giao din BUS (CB) * Cn quan st kho chuyn mch DIP. M un DeviceNet M un CANopen M un PROFIBUS

P2041[0] Chiu di PZD Gi tr trng thi/ thc Kiu truyn d liu t T_PD0_1, T_PD0_5

P2041[1] Chiu di PZD iu khin/ im t

Kiu truyn d liu T_PD0_6 R_PD0_1 R_PD0_5 R_PD0_6

P2041[2] Tc 0:125 kbaud

1:250 kbaud 2:500 kbaud

Xc nh ng truyn CANopen MM4

P2041[3] Chn on Xc nh ng truyn CANopen MM4

P2041[4] - - pht hin cc li truyn thng - tc baud

-Khng cn ci t (tr cc trng hp c bit). Hy xem cc hng dn vn hnh m un tu chn PROFIBUS

Giao din BUS (CB)

M un DeviceNet M un CANopen M un PROFIBUS

P0918 P0918 P0918*)

Tc baud c b bin tn xc nh t ng.

P2040 P2040 P2040

P2041 P2041 P2041

P2051 P2051 P2051

5 BOP/AOP (Tu chn) Thng 07/04


11

5 BOP/AOP (Tu chn)

5.1 Cc nt v cc chc nng

Bng iu khin/ Nt Chc nng ngha

Hin th

trng thi Mn hnh LCD hin th cc ch ci t hin hnh ca b bin tn.

Khi ng b bin tn

n nt ny lm cho b bin tn khi ng. Nt ny khng tc dng mc nh Kch hot nt: BOP: P0700 = 1 hoc P0719 = 1016 AOP: P0700 = 4 hoc P0719 = 40 46 trn ng truyn BOP P0700 = 5 hoc P0719 = 5056 trn ng truyn COM

Dng b bin tn

OFF1 n nt ny khin ng c dng theo c tnh gim tc c chn. Kch hot nt: hy xem nt Khi ng b bin tn. OFF2 n nt ny hai ln (hoc n mt ln v gi mt khong thi gian)

khin ng c dng t do. BOP: Nt ny lun lun c tc dng (khng ph thuc vo thng s P0700 hoc P0719)

o chiu n nt ny lm ng c o chiu quay. o chiu c hin th bng du (-) hoc im chm nhy. Nt ny khng tc dng mc nh Kch hot nt: hy xem nt Khi ng b bin tn.

Chy nhp ng c

trng thi sn sng chy, khi n nt ny, ng c khi ng v quay vi tn s chy nhp c ci t trc. ng c dng khi th nt ny ra. n nt khi ng c ang lm vic khng c tc ng g.

Nt chc

nng

Nt ny c th dng xem thm thng tin Khi ta n v gi nt ny hin th cc thng tin sau, bt u t bt k thng s no trong qu trnh vn hnh: 1. in p mt chiu trn mch DC (hin th bng d- n v V). 2. Dng in ra (A). 3. Tn s ra (Hz). 4. in p ra (hin th bng o- n v V). 5. Gi tr c chn trong thng s P0005 (Nu nh P0005 c ci t hin th bt k gi tr no trong s cc gi tr t1-4 th gi tr ny khng c hin th li). n thm s lm quay vng cc gi tr trn bng hin th. Chc nng nhy T bt k thng s no (v d rxxxx hoc Pxxxx), n nhanh nt Fn s ngay lp tc nhy n r0000, sau ngi s dng c th thay i thng s khc, nu cn thit. Nh tnh nng quay tr v r0000, n nt Fn s cho php ngi s dng quay tr v im ban u. Gii tr Nu xut hin cc cnh bo v cc thng bo li, th cc thng tin ny c th c gii tr bng cch n nt Fn.

Truy nhp thng s n nt ny cho php ngi s dng truy nhp ti cc thng s.

Tng gi tr n nt ny lm tng gi tr c hin th.

Gim gi tr n nt ny lm gim gi tr c hin th.

Trnh n

AOP Gi trnh n AOP ngay lp tc (chc nng ny ch c AOP).

Thng 07/04 5 BOP/AOP (Tu chn)


12

5.2 Thay i cc thng s V d thng s P0003- Mc truy nhp Bc Kt qu hin th

1 n truy nhp thng s

2 n n khi P0003 c hin th

3 n ti cc mc gi tr thng s

4 n hoc t gi tr mong mun ( v d: 3)

5 n xc nhn gi tr v lu li gi tr

6 Lc ny mc 3 c ci t v ngi s dng c th nhn thy tt c cc thng s t mc 1 n mc 3.

6 Ci t thng s Thng 07/04


13

6 Ci t thng s 6.1 Ci t thng s nhanh

B bin tn tng thch vi ng c nh s dng chc nng ci t thng s nhanh, v cc thng s k thut quan trng s c ci t. Ci t nhanh khng cn c thc hin nu thng s nh mc ca ng c ghi trong b bin tn FU (v d ng c tiu chun 1LA 4 cc ca Siemens) thch hp vi thng s nh mc ghi trn nhn ca ng c ang ni vo bin tn.

Cc thng s c k hiu * c kh nng ci t nhiu hn cc kh nng c lit k di y. Hy xem danh sch thng s bit thm cc kh nng ci t khc.

Gi tr mc nh

P0003 = 2 Mc truy nhp ca ngi dng* 1 1 2

Mc c bn: Cho php truy nhp ti nhng thng s thng dng nht M rng: V d truy nhp n cc cc chc nng I/O

3 Chuyn gia (ch dnh cho chuyn gia) P0010 = 1 Ci t thng s * 0

0 1

Sn sng Ci t nhanh

30 Ci t ti nh my Ch P0010 nn c 1 ci t thng s nh mc trn nhn ca ng c.

Tiu chun Chu u/ Bc M 0 0 Chu u [KW], tn s mc nh 50Hz 1 2

Bc M [hp], tn s mc nh 60Hz Bc M [kW], tn s mc nh 60Hz

Ch i vi P0100 = 0 hoc 1, gi tr P0100 c xc nh khi ci t kho chuyn DIP 2 (2) (Xem danh sch cc thng s).

P0304 = P0304 = in p nh mc ng c Thng s FUin p nh mc [V] ghi trn nhn ca ng c in p nh mc ghi trn nhn phi c kim tra, t bit c cu hnh mch Y/ m bo ph hp vi cch ni mch trn bng u ni ca ng c.

P0305 = P0305 = Dng in nh mc ng c Thng s FU

Dng in nh mc [A] ghi trn nhn ca ng c.

P0307 = P0307 = Cng sut nh mc ng c Thng s FUCng sut nh mc [kW/hp] ghi trn nhn ca ng c. Nu P0100 = 0 hoc 2, gi tr tnh theo n v kW. Nu P0100 = 1, gi tr tnh theo n v hp.

P0308 = P0308 = H s Cos nh mc ng c Thng s FU H s cng sut nh mc (cos) ghi trn nhn. Nu nh ci t l 0, gi tr c t ng tnh ton. Nu P0100 = 1,2 th P0308 khng c ngha nn khng cn nhp.

Kho chuyn mch DIP 50/60 Hz cho ch ci t

mc nh

Bt u

P0100 = ...

P0100 = 0

P0100 = 1,2

Thng 07/04 6 Ci t thng s


14

P0309 = P0309 = Hiu sut nh mc ng c Thng s FU (Hiu sut nh mc ca ng c theo [%] c ghi trn nhn) Ci t l 0, gi tr t c tnh ton.

Nu P0100 = 0 th P0309 khng c ngha, khng cn nhp.

P0310 = Tn s nh mc ng c 50.00Hz (Tn s nh mc ca ng c tnh theo [Hz] ghi trn nhn)

S i cc c t ng tnh ton li nu thng s thay i

P0311 = Tc nh mc ng c Thng s FU (Tc nh mc ca ng c tnh theo [rpm] ghi trn nhn)

Ci t l 0, gi tr t c tnh ton Ch : Cn phi nhp thng s trong trng hp iu khin vect mch kn, iu khin V/f vi FCC v b trt.

P0335 = Ch lm mt ng c 0 (Chn h thng lm mt ng c)

0 Lm mt t nhin: S dng trc g qut c gn vi ng c 1 Lm mt cng bc: S dng qut lm mt cp ngun ring

P0640 = H s qu ti ng c 150% (H s qu ti ca ng c tnh theo [%] tng ng vi P0305)

H s ny xc inh gii hn dng in vo ln nht bng a% dng in nh mc ca ng c (P0305).

P0700 = Chn ngun lnh (nhp ngun lnh) 2 0 Ci t mc nh

1 BOP (bn phm) 2 u ni 4 USS trn ng chuyn BOP 5 USS trn ng chuyn COM 6 CB trn ng chuyn COM

P1000 = La chn im t tn s 2 1 im t MOP

2 im t tng t 3 Tn s c nh 4 USS trn ng chuyn BOP 5 USS trn ng chuyn COM 6 CB trn ng chuyn COM

P1080 = Tn s nh nht 0.00Hz ( nhp tn s nh nht cho ng c, n v Hz)

t tn s ng c nh nht ti ng c s chy m khng tnh n tn s t. Gi tr c ci t y c tc dng cho c quay thun v quay ngc.

P1082 = Tn s ln nht 50.00Hz ( nhp tn s ln nht cho ng c, n v Hz)

t tn s ng c ln nht ti ng c s chy m khng tnh n tn s t. Gi tr c ci t y c tc dng cho c quay thun v quay ngc.

P1120= Thi gian tng tc 10.00s ( nhp thi gian tng tc, n v s)

Thi gian tng tc l thi gian ng c tng tc t im dng n im c tn s ln nht (P1082) khi khng dng cch tng tc c dng ng cong.

P1121 = Thi gian gim tc 10.00s ( nhp thi gian gim tc, n v s)

Thi gian gim tc l thi gian ng c gim tc t im c tn s ln nht (P1082) n im dng khi khng dng cch gim tc c dng ng cong.

P1135 = OFF3 Thi gian gim tc 5.00s ( nhp thi gian gim tc dng nhanh bng s)

Xc nh thi gian ng c gim t tn s ln nht xung trng thi dng hn thc hin lnh OFF3 .



15

P1300 = Kiu iu khin 0 ( Nhp kiu iu khin theo yu cu) 0 V/f kiu tuyn tnh 1 V/f FCC 2 V/f kiu ng parabol 3 V/f kiu c th lp trnh c P3900 = 1 Kt thc qu trnh ci t nhanh thng s 0 ( bt u qu trnh tnh ton ng c) 0 Khng ch ci t nhanh thng s (khng c qu trnh tnh ton ng c) 1 Bt u qu trnh ci t nhanh vi ch ci mc nh 2 Bt u qu trnh ci t nhanh 3 Bt u qu trnh ci t nhanh ch dnh cho cc d liu ca ng c CH Vi P3900 = 1,2,3 P0340 t t ti 1 v cc d liu ph hp c tnh ton (xem danh

sch thng s P0340). Kt thc qu trnh ci t nhanh / ci t cho h truyn ng Nu mun thc hin thm cc chc nng khc ca b bin tn, hy s dng phn Ci t

ng dng. Khch hng nn p dng cch ny i vi cc h truyn ng yu cu nhiu tnh nng hot ng cao.

6.2 Ci t ng dng Ci t ng dng iu chnh/ ti u ho s kt hp gia b bin tn v ng c cho mt ng dng c th. B bin tn c nhiu tnh nng nhng khng phi tt c cc tnh nng u cn thit cho mt ng dng c th. C th b qua cc tnh nng ny khi ci t ng dng. Phn ln cc tnh nng c th c m t y; hy xem danh sch cc thng s cho cc tnh nng ph. Cc thng s c nh du * th c nhiu ch ci t hn cc ch c lit k ra y. Hy xem danh sch thng s khi mun ci t thm cc ch khc.

Ch ci t mc nhP0003 = 3 Mc truy nhp ca ngi s dng* 1

1 Cp c bn: cho php truy cp ti cc thng s hay s dng nht 2 Cp m rng: cho php m rng kh nng truy cp, v d ti chc nng I/O ca b

bin tn. 3 Cp chuyn gia: ( ch dnh cho cc chuyn gia s dng )

6.2.1 Giao din ni tip USS P2010 = Tc baud USS 6 Cc ch ci t c th

Ci t tc baud cho truyn thng USS. 3 1200 Baud 4 2400 Baud

P2011 = a ch USS 0 5 4800 Baud Ci t a ch duy nht cho b bin tn. 6 9600 Baud 7 19200 Baud

P2012 = Chiu di PZD USS 2 8 38400 Baud Xc nh s t c di 16 bit PZD trong mt

ln truyn d liu theo kiu USS. 9 57600 Baud

P2013 = Chiu di PKW USS 127 Xc nh s t c di 16 bit PKW trong mt

ln truyn d liu theo kiu USS.

Khi ng

KT THC



16

6.2.2 Chn ngun lnh P0700 = Chn ngun lnh 2

Chn ngun lnh s 0 Ch ci t li khi xut xng 1 BOP (bn phm) 2 u ni 4 USS trn ng truyn BOP 5 USS trn ng truyn COM 6 CB trn ng truyn COM

6.2.3 u vo s (DIN) P0701 =... Chc nng u vo s s 1 1 Cc ch ci t c th u ni s 5

1 ON/OFF1 P0702 =... Chc nng u vo s s 2 12

u ni s 6 12 o chiu

P0703 =... Chc nng u vo s s 3 9 u ni s 7 9 Nhn bit li

P0704 =... Chc nng u vo s s 4 0 Thng qua u vo tng t

Cc u ni s 3, s 4 0 u vo s khng hot ng P0724 = 3

Thi gian tr i vi cc u vo s

Xc nh thi gian tr (thi gian lc)

dng cho cc u vo s.

0 1 2 3

Khng c thi gian tr Thi gian tr 2.5 ms Thi gian tr 8.2 ms Thi gian tr 12.3 ms

0 1 2 3 4 9 10111213141516172125293399

u vo s khng hot ng ON / OFF1 ON + o chiu /OFF1 OFF2- Dng t do OFF3- Gim tc nhanh Nhn bit li Chy nhp, bn phi Chy nhp, bn tri o chiu Tng MOP (Tng tn s) Gim MOP (Gim tn s) im t c nh (chn trc tip) im t c nh (chn trc tip+ ON) im t c nh (chn m nh phn + ON) Ti ch/ T xa Kch hot hm DC Li h thng bn ngoi Khng cho php im t tn s b sung Cho php ci t thng s BICO

BOP

Cc u ni

USS BOP link

USS COM link

CB COM link

iu khin tun t

Knh im t

iu khinng c

P0700 = 2

Thi gian tr: DIN Knh DIN

Chc nng ca DIN

Ch

c n

ng



17

6.2.4 Cc u ra s (DOUT)

P0731= 52.3

BI: Chc nng ca u ra s s 1

Cc ch ci t thng thng

Xc nh ngun ca u ra s s 1. 52.0 B truyn ng sn sng 0 ngP0748= 0 u ra s ca b bin tn 52.7 52.1 B truyn ng sn sng hot ng 0 ng

52.2 B truyn ng ang hot ng 0 ng

Xc nh trng thi cao/thp ca rle cho mt chc nng nht nh.

52.3 Kch hot ch pht hin li ca b truyn ng

0 ng

52.4 OFF2 hot ng 1 ng

52.5 OFF3 hot ng 1 ng 52.6 Ch hm hot ng 0 ng

0 ng 52.7 Ch cnh bo ca b truyn ng hot ng

6.2.5 Chn gi tr im t tn s P1000 = Chn Gi tr t tn s 2

0 Khng c Gi tr t chnh 1 Gi tr t MOP 2 Gi tr t tng t 3 Tn s c nh 4 USS trn ng truyn BOP 5 USS trn ng truyn COM 6 CB trn ng truyn COM

MOP

ADC

FF

USS BOP link

USS COM link

CB COM link

Gi tr t b

sung

Gi tr t

chnh

Knh im t

iu khin tun t

iu khin ng c

P1000 = 12

P1000 = 12

Knh DOUT Bin i cc DOUT

BI: Gi tr thc ca DOUT1

CO/BO: Cc DOUT trng thi



18

6.2.6 u vo tng t (ADC) P0757 = Gi tr x 1 ca nh thang ADC 0 V

P0758 = Gi tr y1 ca nh thang ADC 0.0%

Thng s ny biu th gi tr x1 bng a% ca P2000. (Tn s quy chiu).

P0759 = Gi tr x2 ca nh thang ADC 10 V

P0760 = Gi tr y2 ca nh thang ADC 100.0% Thng s ny biu th gi tr x2 bng a%

ca P2000. (Tn s quy chiu). P0761 = Chiu rng ca di cht ADC 0 V

Xc nh chiu rng ca di tn hiu cht trn u vo tng t.

6.2.7 u ra tng t (DAC) P0771 = CI: DAC 21 Xc nh chc nng ca u ra tng t t 0 n 20 mA P0773 = Hng s thi gian lc DAC 2ms Xc nh thi gian lc [ms]cho tn hiu u ra tng t.Thng s ny cho php lc DAC nh

b lc PT1. P0777 = 0.0%

Gi tr x1 ca thang t l DAC

P0778 = 0

Gi tr y1 ca thang t l DAC

P0779 = 100.0%

Gi tr x2 ca thang t l DAC

P0780 = 20

Gi tr y2 ca thang t l DAC

P0781 = Chiu rng ca di cht DAC 0 t chiu rng ca di cht theo n v

[mA] cho u ra tng t.

Knh ADC

nh thang ADC

Vng cht ADC

Chc nng xxx

Knh ADC

nh thang ADC

Vng cht ADC

im t

Chc nng

Kiu ADC



19

6.2.8 Chit p xung (MOP) P1031 = B nh im t ca MOP 0

Lu li im t ca chit p xung (MOP) hot ng trc khi ra lnh OFF hoc ngt in.

0 1

im t MOP s khng c lu li. im t MOP s c lu li. (Gi tr P1040 c cp nht)

P1032 = Khng cho php cc im t MOP m 1 Cho php t MOP c gi tr m

0 1 Khng cho php im t MOP c gi tr m.

P1040 = im t MOP 5.00 Hz Xc nh im t cho chit p xung. Thi gian tng tc v thi gian gim tc MOP c xc nh bng thng s P1120 v P1121.

Cc ch ci t c th khi chn MOP: Ch la chn Tng MOP Gim MOP

DIN P0719=0, P0700=2, P1000=1, hoc P0719=1, P0700=2 P0702=13 (DIN2) P0703=14

(DIN3)

BOP P0719=0, P0700=1, P1000=1, hoc P0719=11 Nt UP Nt DOWN

USS trn ng truyn BOP

P0719=0, P0700=4, P1000=1, hoc P0719=41

T iu khin USS r2032 Bit 13


USS trn ng truyn COM

P0719=0, P0700=5, P1000=1, hoc P0719=51



CB P0719=0, P0700=6, P1000=1, hoc P0719=61 T iu khin CB

r2090 Bit 13 T iu khin

CB r2090 Bit 14



20

6.2.9 Tn s c nh (FF) P1001 = Tn s c nh s 1 0.00 Hz

C th c chn trc tip qua DIN1 (P0701=15,16)

Khi xc nh chc nng ca cc u vo s (P0701 ti P0703), c th la chn ba kiu khc nhau cho cc tn s c nh:

P1002 = Tn s c nh s 2 5.00 Hz 15= Chn trc tip (P0701-P0703 =15) C th c chn trc tip qua DIN2 (P0702=15,16)

P1003 = Tn s c nh s 3 10.00 Hz

C th c chn trc tip qua DIN3 (P0703=15,16)

P1004 = Tn s c nh s 4 15.00 Hz

ch c bit ny, mi u vo s lun chn tn s c nh tng ng. V d: u vo s s 3 s chn tn s c nh s 3. Nu nhiu u vo hot ng cng mt lc th cc gi tr c cng li. Mt lnh ON cn c b sung. V d: FF1+FF2+FF3.

16= Chn trc tip + lnh ON (P0701-P0703=16) P1005 = 20.00HZ

Tn s c nh s 5

P1006 = 25.00 Hz

Tn s c nh s 6

ch ny, cc tn s c nh c chn ging nh cho 15, tuy nhin cc tn s ny c kt hp vi mt lnh ON. Vd. FF1+FF2+FF3

P1007 = Tn s c nh s 7 30.00 Hz 17= Chn ch m nh phn + Lnh ON ( c m BCD + ON/OFF1)

P1016 = M tn s c nh - Bit 0 1 C th chn 8 tc c nh ch ny.

Xc nh phng php la chn cc tn s

P1017= M tn s c nh - Bit 1 1

P1018 = M tn s c nh - Bit 2 25.00 Hz

DIN3 DIN2 DIN1 0 Hz FF0 0 0 0

P1001 FF1 0 0 1 P1002 FF2 0 1 0 P1003 FF3 0 1 1 P1004 FF4 1 0 0 P1005 FF5 1 0 1 P1006 FF6 1 1 0 P1007 FF7 1 1 1 .

1 Chn trc tip 2 Chn trc tip + Lnh ON 3 Chn ch m ho nh phn+ lnh ON

CH i vi cc ch ci t 2 v 3, tt c cc thng s t P1016 n P1019 phi c t ti gi tr chn b bin tn chp nhn lnh

1 Chn trc tip 2 Chn trc tip + Lnh ON



21

6.2.10 Chy nhp

P1058 = Tn s chy nhp bn phi 5.00Hz Tn s c o bng n v Hz khi ng c quay

theo chiu kim ng h ch chy nhp. P1059 = Tn s chy nhp bn tri 5.00Hz

Tn s c o bng n v Hz khi ng c quay ngc chiu kim ng h ch chy nhp.

P1060 = Thi gian tng tc chy nhp 10.00s Thi gian tng tc (n v s) l khong thi gian

tn s tng t 0 n gi tr ln nht (P1082). Thi gian tng tc khi chy nhp c gii hn bi P1058 hoc P1059.

P1061 = Thi gian gim tc chy nhp 10.00s Thi gian gim tc (n v s) l khong thi gian

tn s gim t gi tr ln nht (P1082) xung 0.

6.2.11 B pht hm to dc (RFG) P1091 = Tn s nhy 1 (n v Hz) 0.00Hz Xc nh tn s nhy 1 trnh cc nh hng ca hin

tng cng hng c hc v kh cc tn s trong khong P1101 (di tn s nhy)

P1092 = Tn s nhy 2 0.00Hz P1093 = Tn s nhy 3 0.00Hz

P1094 = Tn s nhy 4 0.00Hz P1101 = Di tn s nhy (n v Hz) 2.00 Hz

P1120 = Thi gian tng tc (n v s) 10.00 s

P1121 = Thi gian gim tc (n v s) 10.00 s

P1130 = 00.0 s

on cong ban u khi tng tc theo ng cong S (n v tnh theo s)

P1131 =

00.0 s

on cong th hai khi tng tc theo ng cong S (n v tnh theo s)

P1132 = 00.0 s

on cong ban u khi gim tc theo ng cong S (n v tnh theo s)

P1133 = 00.0 s

on cong cui cng khi gim tc theo ng cong S (n v tnh theo s)

P1134 = Phng php ng cong S 0

Phng php tng gim tc theo ng cong S nn s dng v c th trnh c cc phn ng t ngt, nh gim c ng sut v h hng cho phn c. Thi gian tng tc v thi gian gim tc c ko di do phng php tng/ gim on c tuyn ng cong.

0 Lin tc lm trn 1 Khng lin tc lm trn

P1135 = Thi gian gim tc theo lnh OFF3 5.00s

f_max

P1082

P1120 P1121

f1

P1101 Di tn s nhy

Tn s nhy fvo

fra



22

6.2.12 Cc tn s quy chiu / gii hn

P1080 = Tn s nh nht (n v Hz) 0.00 Hz t tn s nh nht cho ng c [Hz], ti ng c s chy m khng ph thuc vo tn s t. Nu im t c gi tr nh hn gi tr ca thng s P1080, th tn s u ra c t P1080 v o du.

P1082 = Tn s ln nht (n v Hz) 50.00 Hz t tn s ln nht cho ng c [Hz], ti ng c s chy m khng ph thuc vo tn s t. Nu im t vt qu gi tr ca thng s P1082, th tn s u ra c gii hn. Gi tr t y c tc dng cho c hai trng hp ng c quay thun v ngc chiu kim ng h.

P2000= Tn s quy chiu (n v Hz) 50.00 Hz Tn s quy chiu (n v Hz) tng ng vi gi tr 100%. Nn thay i ch ci t khi tn s ln nht cn c gi tr ln hn 50Hz. Ch ny c t ng thay i n gi tr 60Hz nu tn s chun 60Hz c chn nh kho chuyn DIP 50/60 hoc thng s P0100. Ch : Tn s quy chiu c nh hng n tn s im t v cc im t tng t (100% P2000) cng nh cc im t tn s thng qua giao thc USS (4000H P2000) u c lin quan n gi tr ny.

6.2.13 iu khin ng c P1300 = Ch iu khin V/f 0

Dng thng s ny chn ch iu khin. i vi ch iu khin "c tnh V/f", t s gia in p ra ca bin tn vi tn s ra ca bin tn c xc nh.

0 V/f tuyn tnh 1 V/f FCC 2 V/f vi c tnh parabol (xem thm trong danh sch cc thng s)

P1310 = B tng lin tc (n v %) 50, 00% B tng in p theo % tng ng vi P0305 (dng in nh mc ca ng c) v P0350

(in tr stato) cc tn s ra thp duy tr t thng ca ng c v cc gi tr in tr c tc dng ca cun dy khng th b qua.

P1311 = B tng gia tc (n v %) 0, 0% Tng in p tng tc hm theo % tng ng vi P0305 v P0350. P1311 ch lm tng

in p khi tng tc/ gim tc v lm tng thm mmen tng tc/ hm. Nu nh thng s P1312 ch c tc dng cho qu trnh tng tc u tin sau lnh ON, th thng s P1311 c tc dng sau mi thi im m h truyn ng tng tc hoc hm.

B tng in p

Vtng thc

V b tnglin tc

f b tng (P1316)

Di gi tr

in p ra

c tnh Tuyn tnh V/f

P1310 c kch hot



23

P1312 = B tng khi khi ng (n v %) 0.0% Tng in p khi khi ng (sau lnh ON) theo % tng ng vi P0305 (dng in nh mc

ng c) hoc P0350 (in tr stato), khi s dng c tnh V/f tuyn tnh hoc bnh phng. in p tng n khi

1) t n im t ln u tin 2) im t gim n gi tr nh hn u ra b pht hm to dc tc thi.

P1320 = 0.0Hz

To tn s th nht ca lut V/f c th lp trnh c

t cc to V/f (t P1320/1321 n P1324/1325 xc nh c tnh V/f.

P1321 = 0.0Hz

To in p th nht ca lut V/f c th lp trnh c

P1322 = 0.0Hz

To tn s th hai ca lut V/f c th lp trnh c

P1323 = 0.0Hz

To in p th hai ca lut V/f c th lp trnh c

P1324 = 0.0Hz

To tn s th ba ca lut V/f c th lp trnh c

P1325 = 0.0Hz

To in p th ba ca lut V/f c th lp trnh c

P1335 = B trt (tnh theo %) 0.0%

iu chnh ng tn s ra ca bin tn sao cho tc ng c khng i khi ti ng c thay i

P1338 = H s suy gim cng hng V/f 0.00 H s suy gim cng hng V/f

6.2.14 Bo v bin tn / ng c P0290 = Ch phn ng qu ti ca b bin tn 0

Chn ch phn ng cho b bin tn i vi hin tng qu nhit bn trong. 0 Gim tn s u ra 1 Dng (F0004) 2 Gim tn s xung v tn s u ra 3 Gim tn s xung sau dng (F0004)

P0292 = Ch cnh bo nhit ca b bin tn 15oC Xc nh s chnh lch nhit (n v oC) gia ngng dng do qu nhit v ngng cnh

bo ca bin tn. Ngng cnh bo c b bin tn lu gi bn trong v ngi s dng khng th thay i c.

P0335 = Ch lm mt ng c (chn h thng lm mt cho ng c) 0 0 Lm mt t nhin: S dng qut c gn trn trc ca ng c 1 Lm mt cng bc: S dng qut lm mt c cp ngun ring

P0610 = Tc ng theo nhit ca ng c 2 Xc nh ch tc ng khi nhit ca ng c ti ngng cnh bo

0 Ch cnh bo, khng tc ng, khng dng, 1 Cnh bo v gim Imax , dng do li F0011 2 Cnh bo, khng tc ng, dng(F0011)

P0611 = Hng s thi gian theo nhit ca ng c (n v s) 100s Thi gian khi ng c n ngng gii hn nhit c tnh thng qua hng s thi gian. Gi tr cao hn th thi gian ng c n ngng gii hn nhit tng. Gi tr thng s P0611 c c tnh theo d liu ng c trong qu trnh ci t nhanh hoc c tnh thng qua thng s P0304 (xem phn tnh ton cc thng s ca ng c). Khi kt thc vic tnh ton cc thng s ca ng c trong qu trnh ci t nhanh, gi tr c lu gi c th c thay th bi gi tr cho trc ca nh sn xut ng c.



24

P0614n= Mc cnh bo qu nhit ca ng c (tnh theo %) 100.0%

Xc nh gi tr ti xut hin cnh bo A0511 (qu nhit ng c)

P0640 = H s qu ti ca ng c [%] 150,0%

Xc nh gii hn dng qu ti cho ng c, n v [%], tng ng vi P0305 (dng in nh mc ca ng c). Gi tr gii hn c ly l gi tr thp hn trong hai gi tr sau: hoc dng in ln nht ca bin tn hoc 400% dng in nh mc ca ng c (P0305).

6.2.15 Cc chc nng c bit ca bin tn 6.2.15.1 Khi ng bm P1200 = Khi ng bm (Flying start - FS) 0

Khi ng b bin tn khi ng c ang quay bng cch thay i nhanh chng tn s ra ca b bin tn cho n khi xc nh c tc thc ca ng c.

0 Ch FS khng c kch hot 1 Ch FS lun lun c kch hot, khi ng theo chiu im t 2 Ch FS c kch hot, nu trong trng hp c cp ngun tr li, gii tr li, OFF2

th khi ng theo chiu im t 3 Ch FS c kch hot, nu trong trng hp gii tr li, OFF2 th khi ng theo

chiu im t 4 Ch FS lun lun c kch hot, ch theo chiu im t 5 Ch FS c kch hot, nu trong trng hp c cp ngun tr li, gii tr li, OFF2

th ch khi ng theo chiu im t 6 Ch FS c kch hot, nu trong trng hp gii tr li, OFF2 th ch khi ng theo

chiu im t P1202 = Dng ng c trong ch khi ng bm (tnh theo %) 100%

Xc nh dng in tm kim cho ch khi ng khi ng c ang quay. P1203 = Di tm kim trong ch khi ng bm (tnh theo %) 100%

t h s tn s ra thay i theo trong ch khi ng bm ng b vi ng c ang quay.

6.2.15.2 T khi ng P1210 = T khi ng 1

t cu hnh chc nng t khi ng 0 Khng tc dng 1 Li c gii tr sau khi cp ngun tr li 2 Khi ng li sau s c mt ngun 3 Khi ng li sau s c thp p li hoc cc li khc 4 Khi ng li sau s c thp p li 5 Khi ng li sau s c mt ngun v cc li khc

6 Khi ng li sau s c thp p/ mt ngun hoc li khc

Ngng cnh bo

Gim I_max

Ngng dng

Tc ng theo nhit ca ng c P0610



25

6.2.15.3 Phanh hm c kh ca ng c P1215 = BI: Kch hot phanh hm ngoi 0

0 Phanh hm ng c hot ng 1 Phanh hm khng hot ng CH Mun iu khin phanh hm bng u ra

r le s th:P0731 = 14 (hy xem phn 6.2.4 "Cc u ra s).

P1216 = Thi gian tr nh phanh (n v s) 1.0s Xc nh khong thi gian m b bin tn chy vi tn s nh nht P1080 sau khi t ho v

trc khi bt u tng tc. P1217 = Thi gian hm sau khi gim tc (n v s) 1.0s Xc nh thi gian b bin tn chy tn s nh nht (P1080) sau khi gim tc

6.2.15.4 Hm mt chiu (DC) P1232 = Dng hm DC (theo %) 100%

Xc nh mc dng hm DC theo % tng ng vi dng in nh mc ca ng c (P0305).

P1233 = Thi gian hm DC 0s Xc nh khong thi gian m hm bng dng DC c kch hot sau lnh OFF1 hoc OFF3.

6.2.15.5 Hm hn hp P1236 = Dng in cho hm hn hp (theo %) 0%

Xc nh mc dng in DC t ln trn sng AC sau khi vt qu ngng in p DC t cho hm hn hp. Gi tr dng nhp theo [%] tng ng vi dng in nh mc ca ng c (P0305). (hy xem phn 6.2.15.6).

Nu P1254 = 0 :

Ngng in p t cho hm hn hp UDC_Comp = 1,13 x 2 Vmains = 1,13 2 P0210 Hoc: Ngng in p t cho hm hn hp UDC_Comp = 0,98.r1242

6.2.15.6 B iu khin Vdc P1240 =... Cu hnh ca b iu khin Vdc 1

Kch hot/ khng kch hot b iu khin Vdc. 0 B iu khin Vdc khng hot ng 1 Kch hot b iu khin Vdc-max

P1254 =... T ng pht hin cc mc lm vic Vdc 1 Kch hot/ khng kch hot ch t pht hin cc

mc lm vic cho b iu khin Vdc cc chc nng khc nhau.

0 Khng c kch hot 1 c kch hot

Kch hot b iu khin Vdc-max

VDC r1242

fthc t fthc t

ft

A0911



26

6.2.15.7 B iu khin PID P2200 =... BI: Kch hot b iu khin PID 0.0

Ch PID cho php ngi s dng kch hot/ khng kch hot b iu khin PID. Ch ci t ti gi tr 1 s kch hot b iu khin PID vng kn v s t ng loi b thi gian tng tc/gim tc c t trc P1120 v P1121 cng im t tn s thng thng.

P2253 =... CI: im t PID 0.0 Xc nh ngun im t cho u vo PID

P2254 =... CI: Ngun PID b tr 0.0 Chn ngun b tr cho im t PID. Tn hiu ny c nhn vi h s b tr v cng vo vi gi tr im t PID.

P2257 =... Thi gian tng tc cho im t PID 1.00s t thi gian tng tc cho im t PID

P2258 =... 1.00s

Thi gian gim tc cho im t PID t thi gian gim tc cho im t PID

P2264 =... CI: Tn hiu phn hi PID 755.0 Chn ngun cho tn hiu phn hi PID.

P2267 =... Gi tr tn hiu phn hi PID ln nht 100.00%t gii hn trn cho gi tr tn hiu phn hi theo [%]

P2268 =... Gi tr tn hiu phn hi PID nh nht 0.00% t gii hn di cho gi tr tn hiu phn hi theo [%]

P2280 =... H s t l ca b iu khin PID 3.000 Cho php ngi s dng ci t h s t l cho b iu khin PID

P2285 =... Hng s thi gian tch phn PID 0.000s Ci t hng s thi gian tch phn cho b iu khin PID

P2291 =... Gii hn trn ca u ra PID 100.00%t gii hn trn cho u ra ca b iu khin PID theo [%]

P2292 =... Gii hn di ca u ra PID 0.00% t gii hn di cho u ra ca b iu khin PID theo [%]

V d: Thng s Thng s dng vn bn V d Thng s P2200 BI: Kch hot b iu khin PID P2200 = 1.0 B iu khin PID hot ng P2253 CI: im t PID P2253=2224 PID-FF1 P 2264 CI: Gi tr phn hi PID P2264=755 ADC P 2267 Gi tr phn hi PID ln nht P2267 Hiu chnh theo ng dng P2268 Gi tr phn hi PID nh nht P2268 Hiu chnh theo ng dng P2280 H s t l ca b iu khin PID P2280 Xc nh bi qu trnh ti u ho P2285 Hng s thi gian tch phn PID P2285 Xc nh bi qu trnh ti u ho P2291 Gii hn trn ca u ra PID P2291 Hiu chnh theo ng dng P2292 Gii hn di ca u ra PID P2292 Hiu chnh theo ng dng

iu khin ng c

PIDra



27

6.3 Ci t ni tip Gi tr thng s ci t hin thi c th c chuyn sang b bin tn MICROMASTER 440 nh b phn mm STARTER hoc b DRIVEMONITOR (hy xem phn 4.1 Thit lp truyn thng MICROMASTER 420 STARTER). Cc ng dng in hnh ca cch ci t ni tip gm: 1. Nu mt s h truyn ng phi ci t theo cng mt cu hnh v c cng mt s chc nng.

Phi thc hin ci t nhanh/ ng dng (ci t ln u) cho h truyn ng u tin. Sau cc gi tr thng s c chuyn n cc h truyn ng khc.

2. Khi thay th cc bin tn MICROMASTER 420.

6.4 Ci t li cc thng s mc nh P0010 =30 Ci t thng s 0

30 Ch ci t khi xut xng (mc nh)

P0970 =1 Ci t li ch ci t mc nh 0

0 Khng ci t mc nh 1 Ci t li thng s mc nh

B bin tn thc hin ch ci t li thng s mc nh (ko di khong 10 s) v sau t ng thot ra khi ch ny ng thi t li cc thng s sau:

P0970=0: Khng ci t mc nh P0010=0: Sn sng lm vic

KHI NG

KT THC

BUSY

Thng 7/04 7 Cc ch hin th v cnh bo


28

7 Cc ch hin th v cnh bo 7.1 Hin th trng thi LED

Cha c u ni ngun Li do qu nhit b bin tn

Sn sng hot ng

Cnh bo gii hn dng. C 2 n LED cng nhy chm.

Li ca b bin tn ngoi cc li c lit k di y.

Cc cnh bo khc. Hai n LED nhy chm lun phin.

Bin tn ang hot ng Dng do thp p/ Cnh bo thp p

Li qu dng B truyn ng khng trng thi sn sng

Li qu p

ROM b li. C 2 n LED u nhp nhy nhanh cng mt lc.

Li do qu nhit ng c

RAM b li. C 2 n LED u nhp nhy nhanh lun phin.

7.2 Cc thng bo li v cnh bo Li ngha li Cnh bo ngha F0001 Li qu dng A0501 Gii hn dng F0002 Li qu p A0502 Gii hn qu p F0003 Li thp p A0503 Gii hn thp p F0004 Qu nhit bin tn A0504 Qu nhit ca bin tn F0005 Qu ti I2t ca bin tn A0505 Qu ti I2t ca bin tn F0011 Qu ti ng c I2t A0506 Li chu k mang ti ca bin tn F0041 Li xc nh d liu ng c A0511 Qu nhit ng c I2t F0051 Li thng s EEPROM F0052 Li phn Cng sut bin tn

A0541 Ch nhn dng ng c c kch hot

F0060 ASIC li A0600 Cnh bo lm vic qu mc RTOS F0070 Li gi tr im t CB A0700- F0071 Khng c d liu cho USS (ng truyn

RS485) trong thi gian khng truyn d liu A0709 Cnh bo CB

A0710 Li truyn thng CB F0072 Khng c d liu cho USS (ng truyn RS232) trong thi gian khng truyn d liu A0711 Li cu hnh CB

F0080 u vo tng t -mt tn hiu u vo F0085 Li t bn ngoi

A0910 B iu khin Vdc-max khng c kch hot

F0101 Trn b nh bin tn A0911 B iu khin Vdc-max c kch hot

F0221 Gi tr phn hi PID thp hn gi tr nh nht A0920 Cc thng s ADC khng c t hp l

F0222 Gi tr phn hi PID ln hn gi tr ln nht A0921 Cc thng s DAC khng c t hp l

A0922 B bin tn khng ni ti F0450 Li cc ch kim tra BIST (ch ch dch v) A0923 Yu cu chy nhp tri phi ng thi

Cc n LED hin th trng thi ca b truyn ng in

Nhp nhy nhanh khong 0.3 giy Nhp nhy chm khong 1giy

8 Danh mc cc thut ng vit tt Thng 7/05


29

8 Danh mc cc thut ng vit tt STT Thut ng vit tt Dng y ting Anh Thut ng ting Vit 1 AC Alternating Current Dng xoay chiu 2 ADC nalog Digital Converter B bin i tng t/s 3 AOP Advanced Operator Pannel Bng iu khin .. 4 ASIC Application Specific ICs Mch tch hp IC ci cc ng

dng c th 5 BCD Binary-Coded Decimal M thp - nh phn 6 BI Binector Input Gi tr u vo ca BICO dng bit 7 BICO Binector/Conector Cng ngh ca Siemens kt ni cc

khu khc nhau ca h iu khin bn trong b bin tn MICROMASTER

9 BO Binector Output Gi tr u ra ca BICO dng bit 10 BOP Basic Operator Panel Bng vn hnh c bn 11 BOP link ng truyn BOP 12 CAN Controller Area Network Mng truyn thng CAN 13 CB Comunication Board Mun truyn thng 14 CB Bus Interface Giao din bus 16 CI Connector Input Gi tr u vo ca BICO dng t

(s thc) 17 CO Connector Output Gi tr u ra ca BICO dng t

(s thc) 18 COM Change-over/Common Chn chung ca rle c 1 tip im

thng ng v mt tip im thng m

20 CT Constant Torque Mmen khng i 21 DAC Digital Analog Converter B bin i s tng t 27 DAC1 Digital Analog Converter 1 B bin i s tng t s 1 28 DAC2 Digital Analog Converter 2 B bin i s tng t s 2 24 DIN Digital Input u vo s 25 DIP DIP switch Kho chuyn mch dng DIP 26 DOUT Digital Output u ra s 27 EEPROM Electrical erasable programmable

read-only memory B nh cng c th xo v ghi li bng in

28 FCC Flux Current Control iu khin dng t thng 29 FF Fixed Frequency Tn s c nh 30 Fn Function Phm chc nng 31 FU-spec FU-specification Thng s FU ph thuc vo cng

sut nh mc ca bin tn 32 LCD Liquid Crystal Display Mn hnh tnh th lng 33 LED Light Emiting diode Diode pht quang 34 MHB Motor Holding Brake Phanh hm ngoi 35 MOP Motor Potentiometer Chit p xung 36 NO Normally Opened Tip im thng m 37 OFF1 Controlled STOP Chc nng lm cho ng c dng

theo c tnh gim tc c chn. 38 OFF2 Free torque motor STOP Chc nng lm cho ng c dng

t do 39 OFF3 Emergency STOP Chc nng lm cho ng c gim

tc nhanh 40 P Setting parameter Thng s ci t 41 PC Personal Computer My tnh

Thng 7/04 8 Danh mc cc thut ng vit tt


30

42 PC COM- PC Communication Cng truyn thng ca my tnh 43 PG Programmer My lp trnh 44 PI Propotional integral Khu tch phn t l 45 PID Proportional Integral Derivative Khu vi tch phn t l 46 PZD Process Data X l d liu 47 r Monitoring parameter Thng s quan st 48 RAM Random Acess Memory B nh truy cp ngu nhin 49 ROM Read-only Memory B nh ch c 50 RTOS Real time operating system H iu hnh hot ng thi gian

thc 51 USS Universial Series Interface Giao din ni tip 52 VDC DC link Voltage in p mt chiu DC link 53 VT Variable Torque Mmen thay i

Vn phng i din Siemens AG Vit nam Ban T ng ha v Truyn ng (A&D) H Ni: Tng 8 Ta nh Hng Hi - 1 o Duy Anh - ng a H Ni. T: 577 6688 Fax: 577 6699 Tp. H Ch Minh: Tng 2 Ta nh Landmark 5B Tn c Thng Q1 T: 825 1900 Fax: 825 1580

31

Lp t c khKhong cch lp tKch thc lp t

Lp t phn inCc thng s k thutCc u ni mch lcCc u dy iu khinS nguyn l

Ci t mc nhKho chuyn i DIP 50/60 HZ

Truyn thngMICROMASTER 420 PCMICROMASTER 420 AOPGiao din BUS (CB)

BOP/AOP (Tu chn)Cc nt v cc chc nngThay i cc thng s

Ci t thng sCi t thng s nhanhCi t ng dngGiao din ni tip USSChn ngun lnhu vo s (DIN)Cc u ra s (DOUT)Chn gi tr im t tn su vo tng t (ADC)u ra tng t (DAC)Chit p xung (MOP)Tn s c nh (FF)Chy nhpB pht hm to dc (RFG)Cc tn s quy chiu / gii hniu khin ng cBo v bin tn / ng cCc chc nng c bit ca bin tnKhi ng bmT khi ngPhanh hm c kh ca ng cHm mt chiu (DC)Hm hn hpB iu khin VdcB iu khin PID

Ci t ni tipCi t li cc thng s mc nh

Cc ch hin th v cnh boHin th trng thi LEDCc thng bo li v cnh bo

Thut ng vit tt

huong dan lap dat & cai dat thong so cho bien tan siemens mm420

Documents