huawei firewall usg5300 configuring system parameters
DESCRIPTION
Leading Huawei networking products distributor-huanetwork.com Huawei Firewall USG5300 Configuring System ParametersTRANSCRIPT
Huawei Firewall USG5300: Configuring System Parameters
This describes the configurations of system parameters, including the language
mode, system name, system time, login prompt, and command level.
1 Changing the Language Mode
The USG5300 can provide the help information either in English or in Chinese. The
language mode can be changed from English to Chinese or from Chinese to English.
Run the following command to change the language mode from Chinese to English:
language-mode English
Run the following command to change the language mode from English to Chinese:
language-mode Chinese
2 Defining the System Name
The system name of the USG5300 is displayed in the command prompt. Then, you can
modify the name as required.
Run the following command to enter the system view:
system-view
Run the following command to define the system name:
sysname sysname
3 Configuring the System Time
An accurate system clock is needed to ensure interworking with other devices. The
USG5300 supports the configuration of the time zone and the daylight saving time.
Run the following command to configure the Universal Time Coordinated (UTC) standard
time:
clock datetime HH:MM:SS YYYY/MM/DD
Run the following command to configure the local time zone:
clock timezone zone-name { add | minus } offset
Run the following command to configure the daylight time:
clock summer-time zone-name { one-off | repeating } start-time start-date end-time end-
date offset
4 Configuring the Prompt Information
Prompt information is the information that the system prompts when a user logs in to the
USG5300, passes login authentication, and starts interactive configuration.1
Run the following command to enter the system view:
system-view
Run the following command to configure the title prompt information during login
authentication:
header login { file file-name | information information-text }
Run the following command to configure the title text when the interactive configuration is
started:
header shell { file file-name | information information-text }
5 Configuring Command Levels
All commands are classified into the following four levels: Visit, Monitoring, Configuration
and Management. The four levels are numbered from 0 to 3. The administrator can
specify the level and the view where the command is located as required.
Run the following command to enter the system view:
system-view
Run the following command to configure the level of a command in a view:
command-privilege level level view view command
Each command is configured with a default view and a level. Generally, you do not need
to reconfigure them.
6 Locking the Configuration Interface
To prohibit unauthorized users from operating the terminal when you leave the operation
terminal temporarily, you can lock the configuration interface. When locking the
configuration interface, you need to specify the password and confirm it. To unlock the
interface, you must enter the correct password to operate the user interface.
Run the following command to lock the user interface:
lock
7 Displaying Status Information about the System
You can run the display commands in any view to collect system status information.
Run the following command to display the system version:
display version
Run the following command to display the system clock:
display clock2
Run the following command to display terminal users:
display users [ all ]
Run the following command to display the starting and ending configuration information:
display saved-configuration
Run the following command to display the configuration information on the current view:
display this
Run the following command to display the configuration information on the current
configuration information:
display current-configuration [ interface interface-type [ interface-number ] | configuration
[ configuration-type ] ] [ | { begin | exclude | include } regular-expression ]
Run the following command to display debugging status:
display debugging [ interface { interface-type interface-number } ] [ module-name ]
Run the following command to display technical support information:
display diagnostic-information
Run the following command to view the Equipment Serial Number(ESN):
display firewall esn
More related:
Huawei next generation firewall comprehensively reslove enterprise security
Huawei Mid-low-end firewall - USG2000 series unified security gateway
More Huawei products and Reviews you can visit: http://www.huanetwork.com/blog
Huanetwork.com is a world leading Huawei networking products distributor, we wholesale
original new Huawei networking equipments, including Huawei switches, Huawei routers,
Huaweisymantec security products, Huawei IAD, Huawei SFP and other Huawei networking
products. Our customers include telecom operators, Huawei resellers, ISP and system integrators.
Right now most of our sales are contributed by regular customers
Our website: http://www. hu anetwork.com 3
Telephone: +852-30501940
Email: [email protected]
Address: 23/F Lucky Plaza, 315-321 Lockhart Road, Wanchai, Hongkong
4