huawei energy, powering the future huawei embedded … embedded power supply... · huawei embedded...
TRANSCRIPT
Huawei Energy, Powering the FutureHuawei Embedded Power Supply Catalog
HUAWEI TECHNOLOGIES CO., LTD.
Huawei embedded power products are highly reliable thanks to the high reliability design, high quality materials control, strict manufacturing control, and sound life cycle management. Huawei has comprehensive telecom power reliability test criteria and environmental devices. Its embedded power products, coupled with the main device products serve 70% of the population all around the world, covering over 150 countries. The failure rate of the products is lower than the average standard in the industry.
Huawei Network Energy power products support the PMBus protocol for intelligent power management. They also support parallel connection between multiple modules for current share, load voltage/current detection, and fault alarming.
Huawei embedded power products feature high efficiency and high power density, which are advanced in the power supply industry. These products improve customer competitiveness and reduce operating costs.
Huawei Network Energy, using its deep understanding of the telecom power industry combined with customers demands' for a highly efficient, green, energy saving future, aims to provide leading embedded power solutions for customers.
Huawei's embedded power products include isolated/non-isolated DC-DC converters, AC modules, server/storage power, communication customer power, with output power ranging from 10 W to 3 kW. Utilizing a leading research team and nine power R&D centers positioned around the world, the Huawei Network Energy team has the capability to serve customers anytime and anywhere. With more than 150 countries using our solutions already, Huawei Network Energy is dedicated to maximizing benefits for customers, and helping them to achieve their business goals.
This catalog lists key features and specifications of Huawei embedded power products. It is designed to provide you with a fast, effective means of selecting the ideal power solution for your application. Product details will be provided in technical manuals.
Efficient
Reliable
Smart
Model Naming Convention...............................................................1
Isolated DC-DC Converters.............................................................3
Standard Brick Series
GAS Sixteenth-Brick .................................................................... 3
GAE Eighth-Brick ........................................................................ 5
GDE Eighth-Brick ........................................................................ 7
GAQ Quarter-Brick ...................................................................... 9
GDQ Quarter-Brick .....................................................................11
GAQ Quarter-Brick Glue-Filled ...................................................... 13
GAH Half-Brick ......................................................................... 15
Nostandard Brick Series
GAC 15 W Single Output ............................................................. 17
GBC 25 W Single Output ............................................................. 19
GAQ 24 V Single Output ............................................................. 21
GAE Dual Output ...................................................................... 23
GAQ Dual Output ...................................................................... 25
Non-isolated DC-DC Converters..............................................29NAK 20 A Output ....................................................................... 29
NAJ 40 A Output ....................................................................... 31
NAD DOSA .............................................................................. 33
AC Module Series................................................................................37ADF 500 W .............................................................................. 37
ACM 800 W ............................................................................. 39
Server Power and Communication Custom Power..........41
Server Power Series
Blade Server Titanium Efficiency ................................................... 41
Blade Server Platinum Efficiency ................................................... 43
Rack Server Titanium Efficiency .................................................... 45
Rack Server Platinum Efficiency .................................................... 47
Communication Custom Power Series
PAC500D5412-CE ..................................................................... 49
PAC/PHD-1K2WA...................................................................... 51
PHB3000S53V5-CB ................................................................... 53
Contents
Model Naming Convention
1
Isolated DC-DC Converters
Example: GDQ33S12B-PQuarter-brick isolated digital DC-DC converter with a baseplate, 12 V rated output voltage, 33 A maximum output current, complies with PMBus communications protocol
Example: ADF42S12BAC input, full-brick digital module with a baseplate, 42 A output current, 12 V output voltage
Example: ACM16S50CFAC input, 16 A output current, single output, 50 V output voltage, customized full-brick
Model Naming Convention
GAQ XXX S XXX B P -XX
Series Output Current Outputs Output Voltage Baseplate CNT Logic Extended Code First letter G: 48 V input A: AC input
Second letter A: analog platform B: upgraded analog platform D: digital platform
Third letter H: half-brick Q: quarter-brick E: eighth-brick S: sixteenth-brick C: nonstandard-brick F: full-brick
e.g. 0A5: 0.5 A 05: 5 A 100: 100 A
S: single output
e.g. 0V9: 0.9 V 3V3: 3.3 V 05: 5 V
B: with a baseplate, no baseplate if this letter is absent
P: positive logic, negative logic if this letter is absent
One digit+one letter Digit: pin depth below board, 3.8 mm if the digit is absent 4: 4.8 mm Letter: P for a digital module indicates PMBus port; no letter indicates no additional information
Output Power Outputs Output Voltage e.g. 50: 50 W 100: 100 W
D: dual outputs
Two digits: positive and negative voltages e.g. D12: ±12 V Four digits: two voltages, with the higher voltage listed first e.g.1212: 12 V, 1.2 V
ACM XXX S XXX S F -XX
Series Output Current Outputs Output Voltage Size Package Type Extended Code First two lettersAC: AC inputHD: HVDC inputAH: AC+HVDC inputs
Third letterM: moduleL: lead frame power moduleE: ECP module
e.g. 0A5: 0.5 A05: 5 A100: 100 A
S: single output
e.g.0V9: 0.9 V3V3: 3.3 V05: 5 V
S: standard brickC: custom size
F: full-brickH: half-brickQ: quarter-brickE: eighth-brickS: sixteenth-brickT: thirty-second-brick
Output Power Outputs Output Voltage e.g. 50: 50 W100: 100 W
D: dual outputsT: three outputsM: four or more outputs
Two digits: positive and negative voltagese.g.D12: ±12 VFour digits: two voltages, with the higher voltage listed firste.g. 1212: 12 V, 1.2 V
Model Naming Convention
2
Non-isolated DC-DC Converters
Server Power and Communication Custom Power
Example: PAC500D5412-CEAC input, 500 W, 54 V and 12 V dual outputs, encased, extractor fan
Example: NAJ12S40-AAnalog point of load (POL) module without a baseplate, 12 V rated input voltage, single output, 40 A rated output current
PAC XXXX S XXXX -X X
Series Output Power Outputs Output Voltage Structure/Efficiency Heat DissipationFirst letterN: non-isolated
Second letterA: analog platformD: digital platform
Third letterK: 24 x 13.5 x 12 mm packageJ: 28 x 24 x 12 mm packageP: SIPS: vertical SMT packageD: 3D architecture
e.g.50: 50 W100: 100 W
S: single output
e.g.0V9: 0.9 V3V3: 3.3 V05: 5 V
O: open frameC: encasedT: Titanium efficiency (96%)B: Platinum efficiency(94%)
B: blower fanE: extractor fanN: natural coolingL: left-to-right air channelR: right-to-left air channel
Outputs Output VoltageD: dual outputsT: three outputs
D12: ±12 VFour digits: two voltages, with the higher voltage listed firste.g. 5312: 53 V and 12 VIf there are more than two outputs, only the two outputs with the highest power are indicated
NAJ XX S XXX B -XX
Series Input Voltage Outputs Output Current Baseplate Extended Code First letterN: non-isolated
Second letterA: analog platformD: digital platform
Third letterK: 24 x 13.5 x 12 mm packageJ: 28 x 24 x 12 mm packageP: single in-line package (SIP)S: vertical SMT packageD: 3D architecture
e.g.03: 3.3 V05: 5 V12: 12 V
S: single outputD: dual outputs
e.g.0A5: 0.5 A05: 5 A50: 50 A
B: with a baseplate,no baseplate if this letter is absent
One to two digits or letters that indicate minor differences between different products in the same platform. No code indicates no additional information
Isolated DC-DC
3
GAS Sixteenth-Brick Series
Specifications
Introduction
Features• Input undervoltage protection•Output overvoltage protection•Output overcurrent protection•Overtemperature protection•Remote On/Off control•Output voltage trim*•Remote sense*
*Unsupported by GAS08S12B
GAS series DC-DC converters are standard sixteenth-brick isolated modules that provide high efficiency and power density. They can deliver output power ranging from 30 W to 100 W as well as output voltages including 1.2 V, 3.3 V, 5 V, and 12 V. The GAS series supports primary On/Off control, remote sense, and voltage trim. The converters are applicable to telecom, data transmission, and distributed power systems, and are compliant with RoHS6 requirements.
Isolated DC-DC
Parameter Model Value Notes & Conditions Output characteristics
Line regulation GAS20S05-4 ±0.3%
Vin = 36–75 V; ImaxOthers ±0.2%
Load regulation GAS20S05-4 ±0.3% Vin = 36–75 V
Iout = 0–ImaxOthers ±0.2% Regulated voltage precision All ±3% Vin = 36–75 V
Iout = 0–Imax
Ripple and noise (pk-pk)
GBS25S1V2 100 mV Oscilloscope bandwidth: 20 MHz
GAS20S05-4 150 mV Others 200 mV
Output voltage adjustment range
GAS08S12B N/A Without trim function Others 80–110 V
Input characteristics Input voltage All 36–75 V
Maximum input current
GBS25S1V2, GBS15S3V3, GBS04S12 2 A
Vin = 36 V
Iout
= Imax
GAS25S3V3B, GAS08S12B 3.5 A GAS20S05-4 4 A
Input reflected ripple current (pk-pk)
GBS25S1V2 20 mA Oscilloscope bandwidth: 20 MHz
GBS04S12 30 mA GAS15S3V3, GAS25S3V3B 51 mA GAS08S12B 25 mA
Protection characteristics
Input undervoltage protection
GAS20S05-4 Turn-on: 32–36 V Turn-off: 30–34 V Hysteresis: 1–3 V
Others Turn-on: 31–36 V Turn-off: 30–35 V Hysteresis: 1–3 V
Output overvoltage protection
GBS25S1V2, GBS15S3V3, GBS04S12
120–150% Hiccup mode GAS25S3V3B 115–150%
GAS08S12B 115–135%
Output overcurrent protection
GBS25S1V2, GBS15S3V3, GBS04S12, GAS20S05-4
110–160% Self-recovery
GAS08S12B 110–180% GAS25S3V3B 110–150%
Overtemperature protection
GBS15S3V3 100–130°C Hysteresis: 5°C
GAS20S05-4 105–130°C Hysteresis: 5°C, self-recovery
Others 105–125°C Hysteresis: 5°C Absolute maximum ratings
Input voltage Continuous Transient (100 ms)
All 80 V 100 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C Other characteristics
Primary On/Off voltage Low level High level
All –0.7 V to +1.2 V 3.5–12 V
Negative logic
Input-to-output isolation voltage All 1500 V DC
MTBF All 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
4
GAS Sixteenth-Brick Series
Models
Pin Description
Mechanical Diagram
Top view
Side view (with a baseplate) Side view (without a baseplate)
Bottom view
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
*GAS08S12B does not have pins 5–7.
Unit: mm [in.]
Model Input Voltage Output Voltage Output Current Output Power Efficiency
GAS08S12B 36–75 V 12 V 7.5 A 90 W 93.0%
GBS04S12 36–75 V 12 V 4.2 A 50 W 91.5%
GAS20S05-4 36–75 V 5 V 20 A 100 W 92.0%
GAS25S3V3B 36–75 V 3.3 V 25 A 82.5 W 91.0%
GBS15S3V3 36–75 V 3.3 V 15 A 50 W 91.0%
GBS25S1V2 36–75 V 1.2 V 25 A 30 W 88.0%
Pin No. Function Pin No. Function 1 Vin (+) 5 Sense (–)2 On/Off 6 Trim 3 Vin (–) 7 Sense (+)4 Vout (–) 8 Vout (+)
Isolated DC-DC
5
GAE Eighth-Brick Series
Specifications
Introduction
Features• Input undervoltage protection•Output overvoltage protection•Output overcurrent protection•Output short circuit protection•Overtemperature protection•Remote On/Off control•Output voltage trim•Remote sense
GAE series DC-DC converters are standard eighth-brick isolated modules that provide high efficiency and power density. The series consists of eight modules in total. They can deliver output power ranging from 50 W to 180 W as well as output voltages including 3.3 V, 5 V, and 12 V. The series supports primary On/Off control, remote sense, and voltage trim. The converters are applicable to telecom, data transmission, and distributed power systems, with all GAE series products complying with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation
GAE15S3V3, GAE30S3V3 0.10%
Vin = 36–75 V; ImaxGAE10S05, GBE04S12, GAE08S12B ±0.2%
GAE15S12, GAE15S12B 0.30%
Load regulation GAE10S05 ±0.5%
Vin = 48 V; Iout = 0–ImaxGAE15S12, GAE15S12B ±0.3% Others ±0.2%
Regulated voltage precision
GAE10S05 3% Applicable for full range
Others 3%
Ripple and noise (pk-pk)
GAE10S05, GAE08S12, GAE08S12B, GAE15S12, GAE15S12B
50 mV Oscilloscope bandwidth: 20 MHz
GAE15S3V3, GAE30S3V3, GBE04S12 100 mV
Output voltage adjustment range All 80–110 V
Input characteristics Input voltage All 36–75 V
Maximum input current
GAE15S3V3 1.8 A
Vin = 36 V, Iout = Imax
GAE30S3V3 3.7 A GAE10S05 2.5 A GBE04S12 2.0 A GAE08S12, GAE08S12B 3.4 A GAE15S12, GAE15S12B 8 A
Input reflected ripple current (pk-pk)
GBE04S12, GAE30S3V3 30 mA
Oscilloscope bandwidth: 20 MHz
GAE15S3V3, GAE08S12, GAE08S12B 20 mA
GAE10S05 14 mA GAE15S12, GAE15S12B 50 mA
Protection characteristics Input undervoltage protection All Turn-on: 31–36 V
Turn-off: 30–35 V Hysteresis: 1–3 V
Output overvoltage protection All 120–150% Hiccup mode
Output overcurrent protection All 105–168% Hiccup mode
Overtemperature protection All 105–125°C Self-recovery
hysteresis: 10°C Absolute maximum ratings
Input voltage Continuous Transient (100 ms)
All 80 V 100 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C Other characteristics
Primary On/Off voltage Low level High level
All –0.7 V to +1.2 V 3.5–12 V
Negative logic
Input-to-output isolation voltage All 1500 V DC
MTBF All 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
6
GAE Eighth-Brick Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Mechanical DiagramUnit: mm [in.]
Top view
Side view (with a baseplate) Side view (without a baseplate)
Bottom view
Model Input Voltage Output Voltage Output Current Output Power Efficiency GAE08S12 36–75 V 12 V 8 A 100 W 94.0%
GAE08S12B 36–75 V 12 V 8 A 100 W 94.0% GBE04S12 36–75 V 12 V 4.2 A 50 W 91.5% GAE15S12 36–75 V 12 V 15 A 180 W 94.0%
GAE15S12B 36–75 V 12 V 15 A 180 W 94.0% GAE10S05 36–75 V 5 V 10 A 50 W 92.5%
GAE15S3V3 36–75 V 3.3 V 15 A 50 W 92.0% GAE30S3V3 36–75 V 3.3 V 30 A 100 W 94.0%
Pin No. Function Pin No. Function 1 Vin (+) 5 Sense (–)2 On/Off 6 Trim 3 Vin (–) 7 Sense (+)4 Vout (–) 8 Vout (+)
Isolated DC-DC
7
GDE Eighth-Brick Series
Specifications
Features
Introduction
• Input undervoltage protection• Output overcurrent protection• Output short circuit protection• Output overvoltage protection• Overtemperature protection• Primary On/Off control• Secondary On/Off control*• Digital voltage adjustment*• Input voltage detection*• Output voltage and current
detection*• Output power monitoring and
alarming*• Pre-bias*• Current share between two
modules* *Unsupported by GDE25S12B
The GDE series DC-DC converters are eighth-brick digital isolated modules that provide high efficiency and power density. They have a rated output voltage of 12 V. The standard eighth-brick version and PMBus-compatible version are available. The PMBus-compatible version complies with the PMBus communications protocol and is backward compatible with I2C and SMBus. The converters provide Pre-bias, output monitoring, and current share functions, and are compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation All ±0.3% Vout = 12 V DC, Pout = 500 W±17% Vin = 36–42 V; Iout = 25 A
Load regulation All ±4% Vin = 48 V; Iout = Iomin–IonomRegulated voltage precision All ±5% Vin = 42–75 V; Iout = Iomin–Ionom
±18% Vin = 36–42 V; Iout = Iomin–IonomRipple and noise (pk-pk) All 250 Oscilloscope bandwidth: 20 MHz
Output voltage range All 11.64–12.36 V Vin = 42–75 V; Iout = 25 A10–12.36 V Vin = 36–42 V; Iout = 25 A
Output voltage adjustment range GDE25S12B-P
5–12.3 V Vin = 48–75 V; voltage adjust-ment through PMBus
5–(0.2 Vin + 3.6 V) Vin = 36–48 V; voltage adjust-ment through PMBus
Input characteristics Input voltage All 36–75 V Maximum input current All 9.5 A Vin = 0–75 V; Iout = 25 AInput reflected ripple current (pk-pk)
All 100 mA Oscilloscope bandwidth: 20 MHz
Protection characteristics Input undervoltage protection All Turn-on: 32–36 V AC
Turn-off: 30–34 V AC Hysteresis: 1–3 V
Output overvoltage protection All 120–140 V Hiccup mode
Output overcurrent protection All 110–140 A Self-recovery
Overtemperature protection All 105–130°C Hysteresis: 5°C, self-recovery
Absolute maximum ratings Input voltage Continuous Transient (100 ms)
All 80 V 100 V
Ambient operating temperature All –40°C to +85°C Storage temperature All –55°C to +125°C
Absolute maximum ratings Remote On/Off voltage Low level High level
All –0.7 V to +1.2 V 3.5–12 V
Negative logic
PMBus_CTL voltage Low level High level
GDE25S12B-P 0–0.8 V 2.8–3.3 V
Active-high
Input-to-output isolation voltage All 1500 V DC
MTBF All 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
PMBus detection precision Input voltage detection precision GDE25S12B-P ±2 V
Vin = 36–75 V; Iout = 0–25 A;TA = –40°C to +85°C
Output voltage detection precision GDE25S12B-P ±0.2 V
Output current detection precision GDE25S12B-P ±2 A
Temperature detection precision GDE25S12B-P ±5°C Vin = 36–75 V; Iout = 0–25 A;
TA = –40°C to +125°C
Isolated DC-DC
8
GDE Eighth-Brick Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins 1–5: X.XX±0.05 mm [X.XXX±0.002 in.]Pins 6–13: X.XX±0.05 mm [0.025±0.002 in.]
*GDE25S12B does not provide the PMBus pins.
Mechanical DiagramUnit: mm [in.]
Bottom ViewSide View
Top View
1
2
3 4
5
68
1012
791113
Model Input Voltage Output Voltage Output Current Output Power Efficiency PMBus GDE25S12B-P 36–75 V 12 V 25 A 300 W 95.5% Yes GDE25S12B 36–75 V 12 V 25 A 300 W 95.5% No
Pin No. Function Pin No. Function Pin No. Function 1 Vin (+) 6 GND 11 ISHARE 2 On/Off 7 SA0 12 PMBus_SCL 3 Vin (–) 8 SYNC 13 PMBus_SDA 4 Vout (–) 9 NC 5 Vout (+) 10 PMBus_CTL
Isolated DC-DC
9
GAQ Quarter-Brick Series
Specifications
Introduction
Features• Input undervoltage protection• Output overvoltage protection • Output overcurrent protection• Output short circuit protection• Overtemperature protection• Remote On/Off control• Output voltage trim• Remote sense
GAQ series DC-DC converters are standard quarter-brick isolated modules that provide high efficiency and power density. The series consists of eight modules in total. They can deliver output power ranging from 80 W to 450 W as well as output voltages including 3.3 V, 5 V, 12 V, 53.5 V, and 96 V. The series supports primary On/Off control, remote sense, and voltage trim. The converters are applicable to telecom, data transmission, and distributed power systems, with all GAQ series products complying with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation GAQ37S12B-4 ±0.3%
Vin = 36–75 V; ImaxGBQ25S3V3B ±0.5% Others ±0.2%
Load regulation GAQ02S54B, GBQ25S3V3B ±0.5%
Vin = 48 V; Iout = 0–ImaxGAQ01S96B ±1% Others ±0.3%
Regulated voltage precision
GAQ02S54B 1.5% Applicable for full range
Others 3%
Ripple and noise (pk-pk)
GAQ10S12, GAQ25S3V3B 50 mV
Oscilloscope bandwidth: 20 MHz
GAQ37S12B-4 100 mV GBQ25S3V3B 20 mV GAQ40S3V3, GBQ40S3V3B
80 mV
GAQ01S96B 2000 mV GAQ20S05-4 120 mV
Output voltage adjustment range
GAQ37S12B-4 90–110% GAQ02S54B 67–106% GAQ01S96B 90–105% Others 80–110%
Input characteristics Input voltage All 36–75 V
Maximum input current
GAQ10S12, GAQ25S3V3B 4 A
Vin = 36 V, Iout = Imax
GAQ37S12B 16 A GAQ40S3V3, GBQ40S3V3B
4.05 A
GAQ02S54B 3.5 A GAQ20S05-4 3.4 A GAQ01S96B 4 A
Input reflected ripple current (pk-pk)
GAQ02S54B, GAQ01S96B 30 mA Oscilloscope bandwidth: 20 MHz GAQ37S12B-4 100 mA
Others 20 mA Protection characteristics
Input undervoltage protection
GAQ37S12B-4, GBQ25S3V3B
Turn-on: 32–36 V Turn-off: 30–35 V Hysteresis: 1–3 V
Others Turn-on: 31–36 VTurn-off: 30–35 V
Output overvoltage protection
GAQ37S12B-4 115–140% Hiccup mode
Others 120–150% Output overcurrent protection All 110–150% Hiccup mode
Overtemperature protection
GAQ37S12B-4, GBQ25S3V3B 105–125°C Self-recovery hysteresis:
5°C Others 100–130°C Absolute maximum ratings
Input voltage Continuous Transient (100 ms)
All 80 V 100 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C Other characteristics
Primary On/Off voltage Low levelHigh level
All –0.7 V to +1.2 V 3.5–12 V
Negative logic
Input-to-output isolation voltage All 1500 V DC
MTBF All 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
10
GAQ Quarter-Brick Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Mechanical DiagramUnit: mm [in.]
Top view
Side view (with a baseplate) Side view (without a baseplate)
Bottom view
Model Input Voltage Output Voltage Output Current Output Power Efficiency GAQ01S96B 36–75 V 96 V 1 A 96 W 87.0% GAQ02S54B 36–75 V 53.5 V 1.5 A 80 W 92.5% GAQ10S12 36–75 V 12 V 10 A 120 W 94.0%
GAQ37S12B-4 36–75 V 12 V 37 A 450 W 95.5% GAQ20S05-4 36–75 V 5 V 20 A 100 W 93.5% GBQ25S3V3B 36–75 V 3.3 V 25 A 82.5 W 93.5% GAQ40S3V3 36–75 V 3.3 V 40 A 132 W 93.5%
GBQ40S3V3B 36–75 V 3.3 V 40 A 132 W 93.5%
Pin No. Function Pin No. Function 1 Vin (+) 5 Sense (–)2 On/Off 6 Trim 3 Vin (–) 7 Sense (+)4 Vout (–) 8 Vout (+)
Isolated DC-DC
11
GDQ Quarter-Brick Series
Specifications
Introduction
Features• Input undervoltage protection• Output overvoltage protection• Output overcurrent protection• Output short circuit protection• Overtemperature protection• Primary On/Off control• Secondary On/Off control*• Digital voltage adjustment*• Input voltage detection*• Output voltage and current detection*• Output power monitoring and alarming• Pre-bias*• Current share between two modules*
*Unsupported by GDQ33S12B, GDQ46S12B, GDQ54S12B-4
GDQ series DC-DC converters are quarter-brick digital isolated modules that provide high efficiency and power density. They have a rated output voltage of 12 V. The standard quarter-brick version and PMBus-compatible version are available. The PMBus-compatible version complies with the PMBus communications protocol and is backward compatible with I2C and SMBus. The converters provide Pre-bias, output monitoring, and current share functions, and are compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Output voltage range
GDQ54S12B-4 11.82–12.18 V Iout = 27 A, Vin = 48 V GDQ46S12B-P, GDQ46S12B 11.88–12.12 V Vin = 48 V, Iout = 23 A
Others 11.64–12.36 V Iout = 16.5 A, Vin = 40–72 V 10.8–12.36 V Iout = 16.5 A, Vin = 36–40 V
Line regulation
GDQ54S12B-4 ±0.3% Vin = 40–60 V, Iout = Imax
GDQ46S12B-P, GDQ46S12B ±0.3% Vin = 42–75 V, Iout = Imax
±17% Vin = 36–42 V, Iout = Imax
Others ±0.2% Vin = 40–72 V, Iout = Imax
±10% Vin = 36–40 V, Iout = Imax
Load regulation GDQ54S12B ±5%
Vin = 48 V; Iout = 0–ImaxGDQ46S12B-P, GDQ46S12B ±4% Others ±0.3%
Ripple and noise (pk-pk)
GDQ46S12B-P, GDQ46S12B 500 mV Oscilloscope bandwidth: 20 MHz Others 200 mV
Input characteristics Input voltage GDQ54S12B-4 40–60 V
Others 36–75 V
Maximum input current
GDQ46S12B-P, GDQ46S12B, GDQ54S12B-4 20 A Vin = 0–60 V, Iout = Imax
Others 14 A Vin = 0–72 V, Iout = Imax
Input reflected ripple current (pk-pk)
GDQ54S12 100 mA Oscilloscope bandwidth: 20 MHz GDQ46S12B-P, GDQ46S12B 500 mA
Others 200 mA Protection characteristics
Input undervoltage protection
GDQ54S12B-4 Turn-on: 35–39 V Turn-off: 33–37 V
Hysteresis: 1–3 V GDQ46S12B-P, GDQ46S12B Turn-on: 32–36 V Turn-off: 30–34 V
Others Turn-on: 31–35.5 V Turn-off: 30–35 V
Output overvoltage protection
GDQ54S12B-4 115–140% Hiccup mode GDQ46S12B-P, GDQ46S12B 120–140%
Others 117–133%
Output overcurrent protection
GDQ46S12B-P, GDQ46S12B, GDQ54S12B-4 110–140% Hiccup mode Others 110–127%
Overtemperature protection
GDQ46S12B-P, GDQ46S12B 105–130°C Hysteresis: 5°C Others 110–130°C Hysteresis: 5°C
Absolute maximum ratings Input voltage Continuous Transient (100 ms)
All 80 V100 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C
Other characteristics Primary On/Off voltageLow level High level
GDQ46S12B-P, GDQ46S12B, GDQ54S12B-4
–0.7 V to +1.2 V3.5–12 V
Negative logic Others –0.7 V to +1.2 V
2.8–8 V Secondary On/Off voltage Low level High level
GDQ33S12B-P, GDQ46S12B-P 0–0.8 V
2.1–3.3 V
Positive logic
Input-to-output isolation voltage All 1500 V DC
MTBF All 2,500,000 hours Telcordia SR332 Method 1, Case 3; 80% load
PMBus detection precision Input voltage GDQ33S12B-P ±1 V
Vin = 36–75 V, Iout = 0–ImaxTA = –40°C to +85°C
GDQ46S12B-P ±2 V Output voltage GDQ33S12B-P/GDQ46S12B-P ±0.2 V
Output current GDQ33S12B-P ±1 A GDQ46S12B-P ±2 A
Temperature GDQ33S12B-P/GDQ46S12B-P ±5°C Vin = 36–75 V, Iout = 0–ImaxTA = –40°C to +125°C
Isolated DC-DC
12
GDQ Quarter-Brick Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.]
X.XX±0.25 mm [X.XXX±0.010 in.]Pins 1–5: X.XX±0.10 mm [X.XXX±0.004 in.]Pins 6–13: X.XX±0.05 mm [0.025±0.002 in.]
*GDQ33S12B, GDQ46S12B, and GDQ54S12B-4 do not provide the PMBus pins.
Mechanical DiagramUnit: mm [in.]
Top View
Side View
Bottom View
Model Input Voltage Output Voltage Output Current Output Power Efficiency PMBus GDQ33S12B-P 36–72 V 12 V 33 A 400 W 95.6% Yes GDQ33S12B 36–72 V 12 V 33 A 400 W 95.0% No
GDQ46S12B-P 36–75 V 12 V 46 A 550 W 96.0% Yes GDQ46S12B 36–75 V 12 V 46 A 550 W 96.0% No
GDQ54S12B-4 40–60 V 12 V 54 A 650 W 96.3% No
Pin No. Function Pin No. Function Pin No. Function 1 Vin (+) 6 SGND 11 ISHARE 2 On/Off 7 SA0 12 PMBus_SCL 3 Vin (–) 8 PMBus_ALT 13 PMBus_SDA 4 Vout (–) 9 SA1 5 Vout (+) 10 PMBus_CTL
Isolated DC-DC
13
GAQ Quarter-Brick Glue-Filled Series
Specifications
Features
Introduction
• Input undervoltage protection•Output overvoltage protection•Output overcurrent protection•Output short circuit protection•Overtemperature protection•Remote On/Off control•Output voltage trim•Basic insulation
The GAQ glue-filled series DC-DC converters are standard quarter-brick isolated modules that can operate over a wide input voltage range, and provide high power density. The series consists of two modules with an input voltage range of 8–75 V and 42–160 V respectively and 12 V, 6 A output. The series supports primary On/Off control and voltage trim. The converters are applicable to industries such as telecom, data transmission, distributed power systems, electric power, vehicle-mounted power, and rail transportation. GAQ glue-filled series products are compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation All ±0.3% Vin = 36–75 V; Imax
Load regulation All ±0.5% Vin = 48 V; Iout = 0–Imax
Regulated voltage precision All 3% Applicable for full range
Ripple and noise (pk-pk) All 150 mV Oscilloscope bandwidth:
20 MHz Output voltage adjustment range All 90–110%
Input characteristics
Input voltage GAQ06S12B-4 8–75 V TAQ06S12B-4 42–160 V
Maximum input current GAQ06S12B-4 15 A
Vin = 36 V, Iout = ImaxTAQ06S12B-4 2 A Protection characteristics
Input undervoltage protection
GAQ06S12B-4 Turn-on: 7–8 V Turn-off: 4–5 V
Hysteresis: 1–3 V TAQ06S12B-4 Turn-on: 38–42 V
Turn-off: 36–40 V Output overvoltage protection All 115–140% Hiccup mode
Output overcurrent protection All 110–150% Hiccup mode
Overtemperature protection All 105–125°C Self-recovery hysteresis:
5°C Absolute maximum ratings
Input voltage GAQ06S12B-4
80 V100 V (transient, 100 ms)
TAQ06S12B-4 170 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C
Other characteristics Primary On/Off voltage Low level High level
All –0.7 V to +1.2 V 3.5–12 V
Negative logic
Input-to-output isolation voltage
GAQ06S12B-4 3000 V DC Basic insulation
TAQ06S12B-4 2500 V DC Reinforced insulation
MTBF All 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
14
GAQ Quarter-Brick Glue-Filled Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Mechanical DiagramUnit: mm [in.]
Pin No. Function Pin No. Function 1 Vin (+) 5 Vin (–)2 Vbus (+) 6 Vout (–)3 On/Off 7 Trim4 Vbus (–) 8 Vout (+)
Model Input Voltage Output Voltage Output Current Output Power Efficiency GAQ06S12B-4 8–75 V 12 V 6 A 72 W 87.0% TAQ06S12B-4 42–160 V 12 V 6 A 72 W 91.0%
Isolated DC-DC
15
GAH Half-Brick Series
Introduction
Features
Specifications
GAH series DC-DC converters are standard half-brick isolated modules that provide high efficiency and power density. The series consists of three modules in total. They can deliver output power ranging from 100 W to 450 W as well as output voltages including 5 V, 28 V, and 48 V. The series supports primary On/Off control, remote sense, and voltage trim. The converters are applicable to telecom, data transmission, and distributed power systems, and are compliant with RoHS6 requirements.
• Input undervoltage protection•Output overvoltage protection•Output overcurrent protection•Output short circuit protection•Overtemperature protection•Remote On/Off control•Output voltage trim•Remote sense
Parameter Model Value Notes & Conditions Output characteristics
Line regulation All ±0.3% Vin = 36–75 V; Imax
Load regulation GAH16S28B, GAH30S05B ±0.3%
Vin = 48 V; Iout = 0–ImaxGAH03S48BP ±0.5%
Regulated voltage precision All 3% Applicable for full range
Ripple and noise (pk-pk)
GAH03S48BP 150 mV Oscilloscope bandwidth: 20 MHz GAH30S05B, GAH16S28B 100 mV
Output voltage adjustment range
GAH16S28B 60–118%
GAH03S48BP, GAH30S05B 90–110%
Input characteristics
Input voltage GAH16S28B 36–60 V
GAH03S48BP, GAH30S05B 36–75 V
Maximum input current
GAH30S05B, GAH03S48BP 5.5 A Vin = 36 V, Iout = Imax
GAH16S28B 16 A
Input reflected ripple current (pk-pk)
GAH30S05B 66 mA Oscilloscope bandwidth: 20 MHz GAH03S48BP 50 mA
GAH16S28B 600 mA
Protection characteristics
Input undervoltage protection All Turn-on: 31–36 V
Turn-off: 30–35 V Hysteresis: 1–3 V
Output overvoltage protection All 120–150% Hiccup mode
Output overcurrent protection
GAH03S48BP 120–180% Hiccup mode
GAH30S05B, GAH16S28B 110–150%
Overtemperature protection All 100–130°C Self-recovery
hysteresis: 5°C
Absolute maximum ratings
Input voltage Continuous Transient (100 ms)
GAH16S28B 65 V 80 V
GAH03S48BP, GAH30S05B 80 V 100 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C
Other characteristics
Primary On/Off voltageLow level High level
GAH03S48BP –0.7 V to +1.2 V 3.5–12 V Positive logic
GAH16S28B, GAH30S05B –0.7 V to +1.2 V 3.6–12 V Negative logic
Input-to-output isolation voltage All 1500 V DC
MTBF All 2,500,000 hours
Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
16
GAH Half-Brick Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Mechanical DiagramUnit: mm [in.]
Top view
Side view (with a baseplate) Side view (without a baseplate)
Bottom view
Pin No. Function Pin No. Function 1 Vin (+) 6 Sense (–) 2 On/Off 7 Trim 3 CASE 8 Sense (+) 4 Vin (–) 9 Vout (+)5 Vout (–)
Model Input Voltage Output Voltage Output Current Output Power Efficiency GAH03S48BP 36–75 V 48 V 3.125 A 150 W 93.0% GAH16S28B 36–60 V 28 V 16 A 450 W 93.0% GAH30S05B 36–75 V 5 V 30 A 150 W 92.5%
Isolated DC-DC
17
GAC 15 W Single Output Series
Specifications
Features
Introduction
• Input undervoltage protection•Output overvoltage protection•Output overcurrent protection•Output short circuit protection•Remote On/Off control•Output voltage trim
The GAC 15 W, single output series isolated modules adopt the open frame structure and industry standard packages and pins. The output voltage can be 3.3 V or 5 V and the efficiency exceeds 87%. The series supports primary On/Off control and voltage trim. The modules are applicable to telecom, data transmission, and distributed power systems, and are compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation All ±0.7% Vin = 36–75 V; Imax
Load regulation All ±0.5% Vin = 48 V; Iout = 0–Imax
Regulated voltage precision All 0.5% Applicable for full range
Ripple and noise(pk-pk) All 100 mV Oscilloscope bandwidth:
20 MHz
Output voltage adjustment range All 90–110%
Input characteristics Input voltage All 36–75 V
Maximum input
current
GAC05S3V3 0.5 A Vin = 36 V, Iout = Imax
GAC03S05 0.8 A
Input reflected ripple current (pk-pk)
GAC05S3V3 20 mA Oscilloscope bandwidth: 20 MHz GAC03S05 30 mA
Protection characteristics Input undervoltage protection All Turn-on: 31–36 V
Turn-off: 30–35 V Hysteresis: 1–3 V
Output overvoltage protection All 120–150% Hiccup mode
Output overcurrent protection All 110–170% Hiccup mode
Overtemperature protection All N/A
Absolute maximum ratings Input voltage Continuous Transient (100 ms)
All 80 V 100 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C
Other characteristics Primary On/Off voltage Low level High level
All –0.7 V to +1.2 V 3.5–12 V
Positive logic
Input-to-output isolation voltage All 1500 V DC
MTBF All 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
18
GAC 15 W Single Output Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Mechanical DiagramUnit: mm [in.]
Top view
Side view
Model Input Voltage Output Voltage Output Current Output Power Efficiency GAC05S3V3 36–75 V 3.3 V 4.5 A 15 W 87.5% GAC03S05 36–75 V 5 V 3 A 15 W 88.0%
Pin No. Function Pin No. Function 1 On/Off 4 Vout (+) 2 Vin (–) 5 Trim 3 Vin (+) 6 Vout (–)
Isolated DC-DC
19
GBC 25 W Single Output Series
Specifications
Introduction
Features• Input undervoltage protection•Output overvoltage protection•Output overcurrent protection•Output short circuit protection•Overtemperature protection•Remote On/Off control•Output voltage trim
The GBC 25 W, single output series isolated modules adopt the open frame structure and industry standard packages and pins. The output voltage can be 3.3 V, 5 V, or 12 V and the efficiency exceeds 86%. The series supports primary On/Off control and voltage trim. The converters are applicable to telecom, data transmission, and distributed power systems, and are compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation GBC06S3V3P ±0.2%
Vin = 36–75 V; ImaxGBC05S05P ±1% GBC2A1S12P ±0.1%
Load regulation GBC06S3V3P ±0.5%
Vin = 48 V; Iout = 0–ImaxGBC05S05P ±1% GBC2A1S12P ±0.2%
Regulated voltage precision All 3% Applicable for full range
Ripple and noise (pk-pk)
GBC06S3V3P 100 mV Oscilloscope bandwidth: 20 MHz GBC05S05P 75 mV
GBC2A1S12P 60 mV Output voltage adjustment range All 90–110%
Input characteristics Input voltage All 36–75 V
Maximum input current GBC06S3V3P, GBC05S05P 1 A
Vin = 36 V, Iout = Imax
GBC2A1S12P 0.75 A
Input reflected ripple current (pk-pk)
GBC05S05P 50 mA Oscilloscope bandwidth:20 MHz GBC06S3V3P,
GBC2A1S12P 40 mA
Protection characteristics Input undervoltage protection All Turn-on: 31–36 V
Turn-off: 30–35 V Hysteresis: 1–3 V
Output overvoltage protection
GBC06S3V3P 118–150% Hiccup mode
GBC05S05P 120–170% GBC2A1S12P 115–140% Latch-off
Output overcurrent protection
GBC06S3V3P 110–200% Hiccup mode GBC05S05P 110–170%
GBC2A1S12P 110–190%
Overtemperature protection
GBC06S3V3P, GBC05S05P 100–125°C Self-recovery hysteresis:
5°C GBC2A1S12P 115–135°C
Absolute maximum ratings Input voltage Continuous Transient (100 ms)
All 80 V100 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C Other characteristics
Primary On/Off voltage Low level High level
All –0.7 V to +1.2 V 3.5–12 V
Positive logic
Input-to-output isolation voltage All 1500 V DC
MTBF All 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
20
GBC 25 W Single Output Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.] *The width of GBC06S3V3P and GBC05S05P is 35.6 [1.40].
Mechanical DiagramUnit: mm [in.]
Top view
Side view
Pin No. Function Pin No. Function 1 On/Off 4 Vout (+)2 Vin (–) 5 Vout (–)3 Vin (+) 6 Trim
Model Input Voltage Output Voltage Output Current Output Power Efficiency GBC2A1S12P 36–75 V 12 V 2.1 A 25 W 88.5% GBC05S05P 36–75 V 5 V 5 A 25 W 87.0%
GBC06S3V3P 36–75 V 3.3 V 6 A 20 W 86.0%
Isolated DC-DC
21
GAQ 24 V Single Output Series
Specifications
Features
Introduction
• Input undervoltage protection•Output overvoltage protection•Output overcurrent protection•Output short circuit protection•Overtemperature protection•Remote On/Off control•Output voltage trim
The GAQ 24 V single output isolated converter adopts the open frame structure. The converter can deliver power up to 72 W, achieving an output efficiency of up to 92.5%. It supports primary On/Off control and voltage trim. The module is applicable to telecom, data transmission, and distributed power systems, and is compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation GAQ03S24 ±3% Vin = 36–75 V; Imax
Load regulation GAQ03S24 ±3% Vin = 48 V; Iout = 0–Imax
Regulated voltage precision GAQ03S24 3% Applicable for full range
Ripple and noise (pk-pk) GAQ03S24 300 mV Oscilloscope bandwidth: 20 MHz
Output voltage adjustment range GAQ03S24 66–100%
Input characteristics
Input voltage GAQ03S24 36–75 V
Maximum input current GAQ03S24 2.4 A Vin = 36 V, Iout = Imax
Input reflected ripple current (pk-pk) GAQ03S24 30 mA Oscilloscope bandwidth: 20
MHz
Protection characteristics
Input undervoltage protection GAQ03S24 Turn-on: 31–36 V Turn-off: 30–35 V Hysteresis: 1–3 V
Output overvoltage protection GAQ03S24 110–140% Hiccup mode
Output overcurrent protection GAQ03S24 110–170% Hiccup mode
Overtemperature protection GAQ03S24 110–130°C Self-recovery hysteresis: 5°C
Absolute maximum ratings Input voltage Continuous Transient (100 ms)
GAQ03S24 80 V 100 V
Ambient operating temperature GAQ03S24 –40°C to +85°C
Storage temperature GAQ03S24 –55°C to +125°C
Other characteristics Primary On/Off voltage Low level High level
GAQ03S24 –0.7 V to +1.2 V 3.5–12 V
Positive logic
Input-to-output isolation voltage GAQ03S24 1500 V DC
MTBF GAQ03S24 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
22
GAQ 24 V Single Output Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Mechanical DiagramUnit: mm [in.]
Top view
Side view
Model Input Voltage Output Voltage Output Current Output Power Efficiency GAQ03S24 36–75 V 24 V 3 A 72 W 92.5%
Pin No. Function Pin No. Function 1 Vin (+) 4 Vout (–)2 On/Off 5 Trim 3 Vin (–) 6 Vout (+)
Isolated DC-DC
23
GAE Dual Output Series
Specifications
Features
Introduction
• Input undervoltage protection•Output overvoltage protection•Output overcurrent protection•Output short circuit protection•Overtemperature protection•Remote On/Off control•Output voltage trim
The GAE dual output DC-DC isolated converter provides high efficiency and power density. The total power of two outputs is 30 W and the output voltage is ±12 V. The converter supports the primary On/Off control function. The converter is applicable to telecom, data transmission, and distributed power systems, and is compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation GAE30D12 ±0.3% Vin = 36–75 V, Vout = 12 V, Imax
±2% Vin = 36–75 V, Vout = –12 V, Imax
Load regulation GAE30D12 ±0.5% Vin = 48 V, Iout = 0–Imax
Vout = 12 V
±3% Vin = 48 V, Iout = 0–ImaxVout = –12 V
Regulated voltage precision GAE30D12 3% Applicable for full range,
Vout = 12 V
Ripple and noise (pk-pk) GAE30D12 150 mV Oscilloscope bandwidth: 20 MHz
Output voltage adjustment range GAE30D12 70–105% Vout = 12 V
Input characteristics Input voltage GAE30D12 36–75 V Maximum input current GAE30D12 1.25 A Vin = 36 V, Pout = 30 W
Input reflected ripple current (pk-pk) GAE30D12 30 mA Oscilloscope bandwidth: 20
MHz
Protection characteristics Input undervoltage protection GAE30D12 Turn-on: 31–36 V
Turn-off: 30–35 V Hysteresis: 1–3 V
Output overvoltage protection GAE30D12 116–138% Hiccup mode
Output overcurrent protection GAE30D12 120–240% Hiccup mode (±12 V)
Overtemperature protection
GAE30D12 110–130°C Hysteresis: 5°C
Absolute maximum ratings Input voltage Continuous Transient (100 ms)
GAE30D12 80 V 100 V
Ambient operating temperature GAE30D12 –40°C to +85°C
Storage temperature GAE30D12 –55°C to +125°C Other characteristics
Primary On/Off voltage Low level High level
GAE30D12 –0.7 V to +1.2 V 3.5–12 V
Positive logic
Input-to-output isolation voltage GAE30D12 1500 V DC
MTBF GAE30D12 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
24
GAE Dual Output Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Mechanical DiagramUnit: mm [in.]
Top view
Side view
Model Input Voltage Output Voltage Output Current Output Power Efficiency GAE30D12 36–75 V ±12 V 1.25 A 30 W 86.5%
Pin No. Function Pin No. Function 1 Vin (+) 5 COM 2 On/Off 6 Trim 3 Vin (–) 7 Vout (+)4 Vout (–)
Isolated DC-DC
25
GAQ Dual Output Series
Specifications
Introduction
Features• Input undervoltage protection•Output overvoltage protection•Output overcurrent protection•Output short circuit protection•Overtemperature protection•Remote On/Off control•Output voltage trim*
*Unsupported by GAQ100D1233B
GAQ dual output series isolated DC-DC converters provide high efficiency and power density. The series consists of four converters in total. The total power of the two outputs can achieve 45 W to 100 W. The output voltage combinations supported are 3.3 V/1.2 V, 3.3 V/1.5 V, ±12 V, and 12 V/3.3 V. The series supports the primary On/Off control function. The converters are applicable to telecom, data transmission, and distributed power systems, and are compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation GAQ65D12 ±0.3% Vin = 36–75 V; ImaxOthers ±1.0%
Load regulation
GAQ65D12 ±0.5%
Vin = 48 V; Iout = 0–ImaxGAQ45D3312, GAQ45D3315 ±1.5%
GAQ100D1233B ±1% Regulated voltage precision All ±3% Applicable for full range
Ripple and noise (pk-pk)
GAQ45D3312, GAQ45D3315 50 mV Oscilloscope bandwidth:
20 MHz GAQ65D12 75 mV
GAQ100D1233B 200 mV Oscilloscope bandwidth:
20 MHz, Vout = 12 V
100 mV Oscilloscope bandwidth: 20 MHz, Vout = 3.3 V
Output voltage adjustment range
GAQ100D1233B N/A Others 80–110%
Input characteristics
Input voltage GAQ100D1233B 38–75 V Others 36–75 V
Maximum input current
GAQ45D3312, GAQ45D3315 2.0 A Vin = 36 V
Iout1 = Imax Iout2 = Imax GAQ100D1233B 5 A
GAQ65D12 2.7 A
Input reflected ripple current (pk-pk)
GAQ65D12 30 mA Oscilloscope bandwidth: 20 MHz
GAQ45D3312, GAQ45D3315 GAQ100D1233B
20 mA
Protection characteristics
Input undervoltage protection
GAQ100D1233B Turn-on: 30–35 V Turn-off: 33–38 V Hysteresis: 1–5 V
Others Turn-on: 31–36 V Turn-off: 30–35 V Hysteresis: 1–3 V
Output overvoltage protection
GAQ65D12 120–140%
Hiccup mode GAQ45D3312, GAQ45D3315 120–150%
GAQ100D1233B 112–150%
Output overcurrent protection
GAQ45D3312 113–175% Hiccup mode, Vout = 3.3 V 115–170% Hiccup mode, Vout = 1.2 V
GAQ45D3315 113–175% Hiccup mode, Vout = 3.3 V 125–180% Hiccup mode, Vout = 1.5 V
GAQ65D12 120–180% Hiccup mode, Vout = 12 V
GAQ100D1233B 125–255% Hiccup mode, Vout = 12 V 116–167% Hiccup mode, Vout = 3.3 V
Overtemperature protection
GAQ45D3312, GAQ45D3315 110–135°C
Self-recovery hysteresis: 5°C GAQ65D12 115–135°C
GAQ100D1233B 105–130°CAbsolute maximum ratings
Input voltage Continuous Transient (100 ms)
All 80 V 100 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C Other characteristics
Primary On/Off voltage Low level High level
All –0.7 V to +1.2 V 3.5–12 V
Positive logic
Input-to-output isolation voltage All 1500 V DC
MTBF All 2,500,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
Isolated DC-DC
26
GAQ Dual Output Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Mechanical DiagramUnit: mm [in.]
Top view
Side view
Model Input Voltage Output Voltage Output Current Output Power Efficiency GAQ65D12 36–75 V ±12 V 2.7 A 65 W 90.0%
GAQ45D3312 36–75 V 3.3 V & 1.2 V 8 A & 13 A 45 W 88.0% GAQ45D3315 36–75 V 3.3 V & 1.5 V 8 A & 12 A 45 W 88.0%
GAQ100D1233B 38–75 V 12 V & 3.3 V 15 A & 4 A 100 W 92.5%
Pin No. Function Pin No. Function 1 Vin (+) 5 COM 2 On/Off 6 Trim 3 Vin (–) 7 Vout (+)4 Vout (–)
Isolated DC-DC
27
GAQ100D1233B
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Pin No. Function Pin No. Function 1 Vin (+) 6 V12-CTL 2 On/Off 7 SDA 3 Vin (–) 8 SCL 4 Vout2 (3.3 V+) 9 Vout1 (12 V+) 5 GND
Non-isolatedDC-DC
29
NAK 20 A Output Series
Introduction
Specifications
Features• Input undervoltage protection•Output overvoltage protection•Output short circuit protection•Output overcurrent protection•Overtemperature protection•Remote On/Off control•Remote sense*•SMT reflow soldering
*Unsupported by NAK12S20-C
The NAK series consists of high-performance, non-isolated SMT converters that feature a wide input voltage range, high current density, and full protection. The converters provide an output current of 20 A and support any output voltage within the specified range. The series can be used for powering distributed power architecture (DPA) and intermediate bus architecture (IBA) in telecom equipment, digital communication equipment, servers, network equipment, and industry equipment. NAK series products are compliant with RoHS6 requirements.
Non-isolated DC-DC
Parameter Model Value Notes & Conditions Output characteristics
Line regulation NAK12S20-C
1% Vin = 9–14 V, Imax
NAK03S20-A Vin = 3.0–5.5 V, Imax
Load regulation NAK12S20-C
1% Vin = 12 V, Iout = 0–Imax
NAK03S20-A Vin = 3.3 V/5.0 V, Iout = 0–Imax
Regulated voltage precision
NAK12S20-C 2% Applicable for full range
NAK03S20-A 3%
Ripple and noise (pk-pk) All 150 mV Oscilloscope bandwidth:
20 MHz
Input characteristics
Input voltage NAK12S20-C 9–14 V
NAK03S20-A 3.0–5.5 V
Protection characteristics
Input undervoltage protection
NAK12S20-C Turn-on: 6.5–8.5 V Turn-off: 5.0–7.0 V
Hysteresis: 0.3 V NAK03S20-A Turn-on: 7–8.5 V
Turn-off: 6–7.5 V
Output overvoltage protection All 110–120% Self-recovery
Output overcurrent protection
NAK03S20-A 22–50 A Hiccup mode
NAK12S20-C 22–40 A
Overtemperature protection All 115–135°C Self-recovery hysteresis: 5°C
Absolute maximum ratings
Input voltage (continuous)
NAK12S20-C 16 V
NAK03S20-A 5.5 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C
Other characteristics Primary On/Off voltage Low level High level
All –0.3 V to +0.5 V 2.0–5.0 V
Positive logic
MTBF All 2,500,000 hours Telcordia SR332, 80% load, 300 LFM, TA = 40°C
30
Non-isolatedDC-DC
NAK 20 A Output Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.05 mm [X.XXX±0.002 in.]
*NAK12S20-C does not have pin 6.
Mechanical DiagramUnit: mm [in.]
Bottom view Side view
Pin No. Function Pin No. Function 1 Vin 5 SGND 2 GND 6 SENSE+ 3 Vout 7 On/Off 4 Trim
Model Input Voltage Output Voltage Output Current Output Power Efficiency Remarks NAK03S20-A 3–3.5 V 0.9–3.3 V 20 A 66 W 95.0% With remote senseNAK12S20-C 9–14 V 0.7–5.3 V 20 A 100 W 93.5% Without remote sense
Non-isolatedDC-DC
31
NAJ 40 A Output Series
Introduction
Specifications
Features• Input undervoltage protection•Output overvoltage protection•Output short circuit protection•Output overcurrent protection•Overtemperature protection•Remote On/Off control•Remote sense*•SMT reflow soldering•Parallel connections between
multiple modules
*Unsupported by NAJ12S40-D
The NAJ series consists of high-performance, non-isolated SMT converters that feature a wide input voltage range, high current density, and full protection. The converters provide an output current of 40 A, support parallel connection, and support any output voltage within the specified range. The series can be used for powering DPA and IBA in telecom equipment, digital communication equipment, servers, network equipment, and industry equipment. NAJ series products are compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation All 1% Vin = 9–14 V, Imax
Load regulation All 1% Vin = 12 V, Iout = 0–Imax
Regulated voltage precision All 2% Applicable for full range
Ripple and noise (pk-pk) All 150 mV Oscilloscope bandwidth:
20 MHz
Input characteristics Input voltage All 9–14 V
Protection characteristics Input undervoltage protection All Turn-on: 7–9 V
Turn-off: 5–7 V Hysteresis: 2 V
Output overvoltage protection All 110–140% Self-recovery
Output overcurrent protection All 44–70 A Hiccup mode
Overtemperature protection All 115–135°C Self-recovery hysteresis:
5°C
Absolute maximum ratings Input voltage (continuous) All 16 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C
Other characteristics Primary On/Off voltage Low level High level
All –0.3 V to +0.5 V 0.86–3.0 V
Positive logic
MTBF All 2,500,000 hours Telcordia SR332, 80% load, 300 LFM, TA = 40°C
32
Non-isolatedDC-DC
NAJ 40 A Output Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.05 mm [X.XXX±0.002 in.]*NAJ12S40-D does not have pin 10 or pin 12.
Mechanical DiagramUnit: mm [in.]
Bottom view Side view
Pin No. Function Pin No. Function Pin No. Function
1 Vin 6 V
in 11 On/Off
2 GND 7 FB 12 SENSE+
3 Vout
8 CLOCKOut 13 ISHARE
4 Vout
9 FSYN 14 SGND
5 GND 10 SENSE– 15 TRIM
Model Input Voltage Output Voltage Output Current Output Power Efficiency Remarks NAJ12S40-D 9–14 V 0.7–3.3 V 40 A 132 W 93.5% Without remote senseNAJ12S40-E 9–14 V 0.7–3.3 V 40 A 132 W 93.5% With remote sense
Non-isolatedDC-DC
33
NAD DOSA Standard Series
Introduction
Specifications
Features• Input undervoltage protection•Output overvoltage protection•Output short circuit protection•Output overcurrent protection•Overtemperature protection•Remote On/Off control•Remote sense•SMT reflow soldering
The NAD series consists of high-performance, non-isolated SMT converters that feature a wide input voltage range, high current density, and full protection. The converters provide an output current of 10 A, 20 A, or 40 A and support any output voltage within the specified range. The series can be used for powering DPA and IBA in telecom equipment, digital communication equipment, servers, network equipment, and industry equipment. NAD series products are compliant with RoHS6 requirements.
Parameter Model Value Notes & Conditions Output characteristics
Line regulation All 1% Vin = 9–14 V, Imax
Load regulation All 1% Vin = 12 V, Iout = 0–Imax
Regulated voltage precision All 3% V Applicable for full
range
Ripple and noise (pk-pk)
All 30 mV Vout ≤ 1.2 VOscilloscope band-width: 20 MHz
All 60 mV Vout > 1.2 VOscilloscope band-width: 20 MHz
Input characteristics Input voltage All 9–14 V
Protection characteristics Input undervoltage protection All Turn-on: 6.5–8.5 V
Turn-off: 5.0–7.0 V Hysteresis: 2 V
Output overvoltage protection All 110–130% Self-recovery
Output overcurrent protection
NAD12S10-A 10–25 A
Hiccup mode NAD12S20-A 22–38 A
NAD12S40-A 44–70 A
Overtemperature protection All 115–135°C Self-recovery
hysteresis: 5°C
Absolute maximum ratings Input voltage (continuous) All 16 V
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C
Other characteristics Primary On/Off voltage Low level High level
All –0.3 V to +0.5 V 2.0–5.0 V
Positive logic
MTBF All 2,500,000 hours Telcordia SR332, 80% load, 300 LFM, TA = 40°C
34
Non-isolatedDC-DC
NAD DOSA Standard Series
Models
Pin Description
Mechanical Diagram
NAD12S10-A
Unit: mm [in.]
Bottom view Side view
Model Input Voltage Output Voltage Output Current Output Power Efficiency Remarks
NAD12S10-A 9–14 V 0.7–5.3 V 10 A 50 W 95.5% With remote sense
NAD12S20-A 9–14 V 0.7–2.0 V 20 A 40 W 92.5% With remote sense
NAD12S40-A 9–14 V 0.7–2.0 V 40 A 80 W 92.5% With remote sense
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.05 mm [X.XXX±0.002 in.]
Pin No. Function Pin No. Function Pin No. Function 1 On/Off 5 VS+ 9 NC 2 Vin 6 Trim 10 PGOOD 3 GND 7 GND 14 NC 4 Vout 8 NC 16 NC
Non-isolatedDC-DC
35
Pin Description
Mechanical Diagram
NAD12S20-A
Unit: mm [in.]
Bottom view Side view
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.05 mm [X.XXX±0.002 in.]
Pin No. Function Pin No. Function Pin No. Function 1 On/Off 5 Trim 9 PG 2 Vin 6 Vout 10 NC 3 NC 7 VS+ 14 SIG_GND4 GND 8 VS–
36
Non-isolatedDC-DC
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.05 mm [X.XXX±0.002 in.]
Mechanical Diagram
NAD12S40-A
Unit: mm [in.]
Bottom view Side view
Pin No. Function Pin No. Function Pin No. Function 1 On/Off 6 Trim 11 SIG_GND2 Vin 7 VS+ 12 VS– 3 NC 8 GND 16 PG 4 GND 9 NC 17 NC 5 Vout 10 GND 19 NC
AC Module
37
ADF 500 W Series
Specifications
Introduction
Features• Input undervoltage protection• Input overvoltage protection•Output overvoltage protection•Output overcurrent protection•Overtemperature protection•Remote On/Off control•Output voltage trim
The ADF 500 W series full-brick power module is available in three models, with output voltages of 48 V, 28 V, and 12 V and an output power of 500 W. The ADF 500 W modules support a wide input AC/DC range, heat dissipation using a shell or heat sink, and parallel connections between multiple modules. They also support PMBus communication and related protection functions. Their surge protection complies with IEC/EN61000-4-5. The ADF 500 W modules are TUV-, UL-, and CE-certified and can be applied to industrial, communication, wireless, detection instrument, and LED scenarios.
AC Module
Parameter Model Value Notes & Conditions Output characteristics
Line regulation All ± 0.3% Vout = 12 V DC, Pout = 500 WLoad regulation All ± 0.8% Regulated voltage precision All ± 3% Applicable for full range
Ripple and noise(pk-pk)
ADF10S48B
550 mV –5°C ≤ TA ≤ +85°COscilloscope bandwidth: 20 MHz
800 mV –25°C ≤ TA < –5°C –40°C ≤ TA< –25°C Oscilloscope bandwidth: 20 MHz
ADF18S28B
320 mV –5°C ≤ TA ≤ +85°COscilloscope bandwidth: 20 MHz
640 mV –25°C ≤ TA< –5°C–40°C ≤ TA< –25°COscilloscope bandwidth: 20 MHz
ADF42S12B-A 240 mV –5°C ≤ TA < +85°C–40°C ≤ TA < –5°COscilloscope bandwidth: 20 MHz
Output voltage adjustment range
ADF10S48B 36–55 V The output voltage can be adjusted by I2C or trim. Trim is recommended.
ADF18S28B 20–32 V ADF42S12B-A 11.4–12.6 V
Input characteristics Input voltage All 90–290 V AC Maximum input current All 8 A Vin = 90 V AC, 100% load
Power factor All 0.95 Vin = 110/220 V AC, 100% load Protection characteristics
Input undervoltage protection All
Turn-on: 90 V AC Turn-off: 74–85 V AC
Hysteresis: 5°C
Input overvoltage protection All
Turn-on: 290 V AC Turn-off: 295–310 V AC
Hysteresis: 5°C
Output overvoltage protection
ADF10S48B 59.5 V Latch-off ADF18S28B 37 V Latch-off ADF42S12B-A 15.5 V Latch-off
Output overcurrent protection All 105–150 A Self-recovery
Overtemperature protection
ADF10S48B, ADF42S12B-A 90°C Hysteresis: 5°C, self-recovery
ADF18S28B 95°C Hysteresis: 5°C, self-recovery Absolute maximum ratings
Ambient operating temperature All –40°C to +85°C
Storage temperature All –55°C to +125°C Other characteristics
Primary On/Off voltage Low level High level
All 0–0.8 V 2.4–3.5 V
Negative logic
Input voltage precision All ± 10 V Vin = 90–290 V AC
AUX All 10–14 V Trim All 0–2.5 V
MTBF All 1,200,000 hours Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
AC Module
38
ADF 500 W Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.] 38
Mechanical DiagramUnit: mm [in.]
Top View Side View
Bottom View
Pin No. Function Pin No. Function Pin No. Function Pin No. Function 1 AC1 6 –BC 11 COM 16 SCL 2 AC2 7 +V
out 12 AUX 17 ALERT
3 SP 8 – Vout
13 CB 18 CNT 4 R 9 +S 14 ENA 19 TRIM 5 +BC 10 –S 15 SDA 20 ADDR
Model Input Voltage Output Voltage Output Current Output Power Efficiency ADF10S48B 90–290 V AC 48 V 10 A 500 W 92%ADF18S28B 90–290 V AC 28 V 18 A 500 W 92%
ADF42S12B-A 90–290 V AC 12 V 42 A 500 W 91%
AC Module
39
Specifications
Introduction
Features• Input undervoltage protection• Input overvoltage protection•Output overvoltage protection•Output overcurrent protection•Overtemperature protection•Remote On/Off control•Output voltage trim
The ACM 800 W full-brick power module has an output voltage of 50 V and an output power of 800 W. The ACM 800 W module supports a wide AC/DC input range, heat dissipation using a shell or heat sink, and parallel connections between multiple modules. It also supports PMBus communication and related protection functions. Its surge protection complies with IEC/EN61000-4-5. The ACM 800 W module is TUV-, UL-, and CE-certified and can be applied to industrial, communication, wireless, detection instrument, and LED scenarios.
ACM 800 W Series
Parameter Model Value Notes & Conditions Output characteristics
Line regulation ACM16S50CF ± 1% Load regulation ACM16S50CF ± 2% Regulated voltage precision ACM16S50CF ± 0.5% Applicable for full range
Ripple and noise (pk-pk) ACM16S50CF
500 mV 90 V AC ≤ Vin ≤ 264 V AC190 V DC ≤ Vin ≤ 400 V DC–5°C ≤ TB ≤ +100°C
750 mV 264 V AC < Vin ≤ 300 V AC–40°C ≤ TB < –5°C
150 mV TB = 25°CVin = 220 V AC
Output voltage adjustment range ACM16S50CF 42–57.6 V
The output voltage can be adjusted by I2C or trim. Trim is recommended.
AC input characteristics
Input voltage ACM16S50CF 90–300 V AC 90–290 V AC
Maximum input current ACM16S50CF 11 A Vin = 90 V AC, 100% load
Power factor ACM16S50CF 0.99 TB = 25°CVin = 110/220 V AC, 100% load
DC input characteristics Input voltage ACM16S50CF 190–400 V DC Maximum input current ACM16S50CF 5 A Vin = 90 V AC, 100% load
Protection characteristics
Input undervoltage protection ACM16S50CF
Turn-on: 90 V AC Turn-off: 85 V AC Hysteresis: 5 V
Turn-on: 190 V DC Turn-off: 185 V DC Hysteresis: 5 V
Input overvoltage protection ACM16S50CF
Turn-on: 290 V AC Turn-off: 300 V AC Hysteresis: 5 V
Turn-on: 405 V DC Turn-off: 415 V DC Hysteresis: 5 V
Output overvoltage protection ACM16S50CF 58–60 V Self-recovery
Output overcurrent protection ACM16S50CF 17.5 A Self-recovery
Overtemperature protection ACM16S50CF 100°C Hysteresis: 5°C, self-recovery
Absolute maximum ratings Baseplate tem-perature TB
ACM16S50CF –40°C to +100°C
Ambient tempera-ture TA
ACM16S50CF –40°C to +85°C
Other characteristics Remote On/Off voltage Low level High level
ACM16S50CF –0.3 V to +0.8 V 2.4–3.6 V
Negative logic
AUX ACM16S50CF 10–14 V Trim ACM16S50CF 0–2.5 V
MTBF ACM16S50CF 1,200,000 hours TB: 25°C, Telcordia SR332 Method 1 Case 3; normal input, rated output, 80% load
AC Module
40
ACM 800 W Series
Models
Pin Description
TolerancesDimensions: X.X±0.5 mm [X.XX±0.02 in.] X.XX±0.25 mm [X.XXX±0.010 in.]Pins: X.XX±0.10 mm [X.XXX±0.004 in.]
Mechanical DiagramUnit: mm [in.]
Top View
Side View
Bottom View
Model Input Voltage Output Voltage Output Current Output Power Efficiency ACM16S50CF 90–300 V AC 50 V 16 A 800 W 93%
Pin No. Function Pin No. Function Pin No. Function Pin No. Function 1 AC1 7 AUX 13 RST 19 BC (+) 2 AC2 8 GND 14 SDA 20 RLYC 3 SP 9 SCL 15 ALERT 21 RLYP 4 V
out (+) 10 CNT 16 ACF
5 Vout
(–) 11 ADDR 17 TRIM 6 CB 12 18 BC (–)
Communication Custom Power
41
Introduction
Specifications
Features• Input undervoltage protection• Input overvoltage protection •Output overvoltage protection•Output short circuit protection•Output overcurrent protection•Overtemperature protection•Supports PMBus communications
protocol•Applicable to TT, TN, IT power
distribution systems•N+1 redundancy (N ≤ 7)•Parallel connections between
multiple modules
The PAC2000S12-TE blade server power module supports AC and HVDC inputs. It provides Titanium efficiency and supports N+1 redundancy and hot swapping. The power module also supports PMBus communication and related protection functions. The surge protection mechanism is compliant with IEC/EN61000-4-5. The PAC2000S12-TE can be applied to servers, storage equipment, high performance and reliability servers, routers, network switches, and telecom equipment.
Blade Server Titanium Efficiency Power Module
Communication Custom Power
Parameter Model Value Notes & Conditions Output characteristics
Output voltage range PAC2000S12-TE 12–12.6 V
Output power PAC2000S12-TE 2000 W Vin = 198–264 V ACVin = 200–300 V DC
Line regulation PAC2000S12-TE ± 1% Applicable for full range Load regulation PAC2000S12-TE ± 2.5% Rated input, Pout = 0–2000 W Regulated voltage precision PAC2000S12-TE ± 2.5% Applicable for full range
Output voltage ripple (pk-pk) PAC2000S12-TE 150 mV Oscilloscope bandwidth: 20
MHz Input characteristics
Input voltage PAC2000S12-TE 100–240 V AC @50/60 Hz; 240 V DC
Maximum input current PAC2000S12-TE 15 A
Power factor PAC2000S12-TE 0.98 Vin = 220 V AC; 100% load Protection characteristics
Input undervoltage protection PAC2000S12-TE
Turn-on: 85 V AC Turn-off: 90 V AC
Hysteresis: 5 V, self-recovery Turn-on: 175 V DC Turn-off: 180 V DC
Input overvoltage protection PAC2000S12-TE
Turn-on: 280 V AC Turn-off: 275 V AC
Hysteresis: 5 V, self-recovery Turn-on: 310 V DC Turn-off: 305 V DC
Output overvoltage protection PAC2000S12-TE 13.5–15 V Latch-off
Output overcurrent protection PAC2000S12-TE 100–125% Latch-off
Overtemperature protection PAC2000S12-TE 61°C No input, self-recovery
Absolute maximum ratings Ambient operating temperature PAC2000S12-TE –5°C to +60°C
Storage temperature PAC2000S12-TE –40°C to +85°C Other characteristics
PMBus communication PAC2000S12-TE
Monitoring of input voltage/current/power and output voltage/current/power; alarming
Surge protection PAC2000S12-TE
Differential mode: 2 kV; common mode: 4 kV
IEC61000-4-5 compliant
Differential mode: 2.5 kV; common mode: 2.5 kV
ITU-T compliant
MTBF PAC2000S12-TE 500,000 hours Telcordia SR332, 100% load, TA = 25°C
42
Communication Custom Power
Blade Server Titanium Efficiency Power Module
Models
Pin Description
Tolerances±0.50 [0.020 in.] (≤ 63 [2.48])±1.00 [0.040 in.] (> 63 [2.48])
Mechanical DiagramUnit: mm [in.]
Top View
Front View
Left View
Right View
Back View
P1 P12P4 P8
ABCD
1
P2 P3 P5 P6 P7 P9 P10 P11
2 34
Pin Signal Description Pin Signal Description P1–P6 12 V 12 V output D2 PRESENT Presence signal P7–12 GND 12 V ground A3 DCOK 12 V output normal
A1 A0 Address 0 B3 ACOK AC input normal B1 A1 Address 1 C3 PS_INTERRUPT PSU output interruption signal C1 A2 Address 2 D3 PSON PSU on/off control signal D1 PS_KILL PSU shutdown signal A4 N/A Reserved A2 SCL PMBus clock signal B4 I_Monitor 12 V output current share signal B2 SDA PMBus data signal C4 Sense+ 12 V output remote sense (+) C2 GND PMBus signal ground D4 Sense– 12 V output remote sense (–)
Model Input Voltage Output Voltage Output Current Output Power Efficiency
PAC2000S12-TE 90–264 V AC,190–300 V DC 12 V 163 A 2000 W 96%
Communication Custom Power
43
Specifications
• Input overvoltage protection• Input undervoltage protection •Output overcurrent protection•Output short circuit protection•Output overvoltage protection•Overtemperature protection•Supports PMBus communications
protocol•Applicable to TT, TN, IT power
distribution systems*•N+N or N+M redundancy•Parallel connections between
multiple modules *Unsupported by PDC2500S12-CE
Blade Server Platinum Efficiency Power Module
Introduction
Features
The blade server Platinum power series consists of three AC-DC and one DC-DC products that can provide power ranging from 2000 W, 2500 W, and 3000 W. The products support N+1 redundancy and hot swapping. They also support PMBus communication and related protection functions. Their surge protection mechanism complies with IEC/EN61000-4-5 and ITU-TK.21. The blade server Platinum power series can be applied to storage equipment, high performance and reliability servers, routers, network switches, and telecom equipment.
Parameter Model Value Notes & Conditions Output characteristics
Output voltage range All 12.0–12.8 V
Output power
PAC3000S12-CE PHD3000S12-CE 3000 W
Vin = 90–175 V AC; Pomax = 1200 WVin = 175–200 V AC; Pomax = 2500 WVin = 200–264 V AC; Pomax = 3000 W
PAC2000S12-CE 2000 W Vin = 90–200 V AC; Pomax = 800 WVin = 200–220 V AC; Pomax = 1800 WVin = 220–264 V AC; Pomax = 2000 W
PDC2500S12-CE 2500 W Vin = 38–40 V DC; Pomax = 2200 WVin = 40–72 V DC; Pomax = 2500 W
Line regulation All ± 1% Vin = 90–264 V AC; Pout = MaxLoad regulation All –2.4% to +1.2% Vin = 220 V AC; Pout = 0–MaxOutput voltage ripple (pk-pk) All 150 mV Oscilloscope bandwidth: 20 MHz
Input characteristics
Input voltage
PAC3000S12-CE PAC2000S12-CE
90–264 V AC@50/60 Hz
PHD3000S12-CE 260–400 V DC PDC2500S12-CE 38.4–72 V
Maximum input current
PAC2000S12-CE 10 A Vin = 220 V AC, Pout = MaxPAC3000S12-CE 16 A Vin = 220 V AC, Pout = MaxPDC2500S12-CE 80 A Vin = 38–72 V; Pout = MaxPHD3000S12-CE 16 A
Power factor PAC3000S12-CE PAC2000S12-CE PDC2500S12-CE
0.98 Vin = 220 V AC, Pout = Max
PHD3000S12-CE Protection characteristics
Input overvoltage protection
PAC2000S12-CE PAC3000S12-CE
Turn-on: 275 V AC Turn-off: 280 V AC Self-recovery, hysteresis: 5 V
PDC2500S12-CE Turn-on: 77 V DC Turn-off: 82 V DC Self-recovery, hysteresis: 2 V
PHD3000S12-CE Turn-on: 405 V DC Turn-off: 400 V DC Self-recovery, hysteresis: 5 V
Input undervoltage protection PDC2500S12-CE Turn-on: 36 V DC
Turn-off: 34 V DC Hysteresis: 2 V
Output overvoltage protection All 15 V Latch-off
Output overcurrent protection
PAC3000S12-CE PHD3000S12-CE 256–300 A
Latch-off PAC2000S12-CE 170–200 A PDC2500S12-CE 213–250 A
Overtemperature protection All 50°C Self-recovery
Absolute maximum ratings
Ambient operating temperature
PAC3000S12-CE PHD3000S12-CE –5°C to +50°C
PAC2000S12-CE –5°C to +60°C PDC2500S12-CE 0–50°C
Storage temperature All –40°C to +85°C
Other characteristics PMBus communication All Monitoring of input voltage/current/power
and output voltage/current/power; alarming
Surge protection
PAC2000S12-CE PHD3000S12-CE
Differential mode: 2.5 kV; common mode: 2.5 kV
IEC61000-4-5 compliant
PAC3000S12-CE Differential mode: 6 kV; common mode: 6 kV
IEC61000-4-5 and ITU-TK.21 compliant
PDC2500S12-CE Differential mode: 2.5 kV; common mode: 4 kV
IEC61000-4-5 compliant
MTBF All 500,000 hours Telcordia SR332, Vin = 220 V AC,100% load, TA = 25°C
44
Communication Custom Power
Blade Server Platinum Efficiency Power Module
Models
Pin Description
Mechanical DiagramUnit: mm [in.]
Tolerances±0.50 [0.020 in.] (≤ 63 [2.48])±1.00 [0.040 in.] (> 63 [2.48])
[4.2
9]10
9.0
116.
0[4.
57]
126.
0 [4
.96]
4.5
[0.1
8]
113.
9 [4
.48]
2.5
[0.1
0]
SnapLed
Top View
Output Connector
3.8
[0.1
5]
276.8 [10.90] 26.7 [1.05]8.3 [0.33]
18.4
[0.7
2]
Left View
Output Connector
PAC2000S12-CE&PAC3000S12-CE
PDC2500S12-CE
PHD3000S12-CE
Front View
Front View
Front View
Back View
P1 P12P4 P8
ABCD
1
P2 P3 P5 P6 P7 P9 P10 P11
23 4
Model Input Voltage Output Voltage Output Current Output Power Efficiency PAC2000S12-CE 90–264 V AC 12 V 162.6 A 2000 W 94.5% PAC3000S12-CE 90–264 V AC 12 V 244 A 3000 W 94.5% PDC2500S12-CE 38.4–72 V DC 12 V 203.3 A 2500 W 94.0% PHD3000S12-CE 260–400 V DC 12 V 244 A 3000 W 94.0%
Pin Signal Description Pin Signal Description P1–P6 12 V 12 V output D2 PRESENT Presence signal P7–12 GND 12 V ground A3 DCOK 12 V output normal
A1 A0 Address 0 B3 ACOK AC input normal B1 A1 Address 1 C3 PS_InTERRUPT Power output interruption signal C1 A2 Address 2 D3 PSON Power on/off control signal D1 PS_KILL Power supply shutdown signal A4 N/A Reserved A2 SCL PMBus clock signal B4 I_Monitor 12 V output current share signal B2 SDA PMBus data signal C4 Sense+ 12 V output remote sense (+) C2 GND PMBus signal ground D4 Sense– 12 V output remote sense (–)
Communication Custom Power
45
Introduction
Specifications
Features• Input undervoltage protection• Input overvoltage protection•Output overvoltage protection•Output short circuit protection•Output overcurrent protection•Overtemperature protection•Supports PMBus communications
protocol•Applicable to TT, TN, IT power
distribution systems•N+1 redundancy (N ≤ 5)•Parallel connections between
multiple modules
The rack server Titanium 750 W power module provides up to 96% efficiency of use, and supports N+1 redundancy and hot swapping. The power module supports AC and HVDC inputs, and also supports PMBus communication and related protection functions. Its surge protection mechanism complies with IEC/EN61000-4-5. The rack server power series can be applied to servers, storage equipment, high performance and reliability servers, routers, network switches, and telecom equipment.
Rack Server Titanium Efficiency Series
Parameter Model Value Notes & Conditions Output characteristics
Output voltage range PAC750D1212-TE 11.85–12.45 V 11.4–12.6 V@12VSB
Vin = 180–264 V AC;Pout = MaxVin = 180–300 V DC;Pout = Max
Output power PAC750D1212-TE 750 W Vin = 180–264 V AC;Pout = MaxVin = 180–300 V DC;Pout = Max
Regulated voltage precision PAC750D1212-TE 3% V Applicable for full range
Output voltage ripple (pk-pk) PAC750D1212-TE 120 mV Oscilloscope bandwidth:
20 MHz
Input characteristics
Input voltage PAC750D1212-TE 180–264 V AC@50/60 Hz; 180–300 V DC
Maximum input current PAC750D1212-TE 4.1 A Vin = 230 V AC;
Pout = 750 W
Power factor PAC750D1212-TE 0.97 Vin = 230 V AC; Pomax
Protection characteristics Input undervoltage protection PAC750D1212-TE Turn-on: 172 V AC
Turn-off: 165 V AC Hysteresis: 5 V
Input overvoltage protection PAC750D1212-TE Turn-on: 275 V AC
Turn-off: 280 V AC Hysteresis: 5 V
Output overvoltage protection PAC750D1212-TE 15 V Latch-off
Output overcurrent protection PAC750D1212-TE 73–93 A, 2.5–3 A Latch-off
Overtemperature protection PAC750D1212-TE 55°C Self-recovery
Absolute maximum ratings Ambient operating temperature PAC750D1212-TE 5–55°C
Storage temperature PAC750D1212-TE –40°C to +85°C
Other characteristics
PMBus communication PAC750D1212-TE
Monitoring of input voltage/current/power and output voltage/current/power; alarming
Surge protection PAC750D1212-TE Differential mode: 1 kV, common mode: 2 kV IEC61000-4-5 compliant
MTBF PAC750D1212-TE 500,000 hours Telcordia SR332, 80% load, 300 LFM, TA = 40°C
46
Communication Custom Power
Rack Server Titanium Efficiency Series
Models
Pin Description
Tolerances±0.50 [0.020 in.] (≤ 63 [2.48])±1.00 [0.040 in.] (> 63 [2.48])
Mechanical DiagramUnit: mm [in.]
Left View
196.5±0.5 [7.74±0.01]
1.6
[0.0
6]
Right View
31.0 [1.22] 190.5±0.5 [7.50±0.01]
8.3
[0.3
3]
Top View
227.0 [8.94]
194.2±0.4 [7.64±0.01]11.4 [0.44]
1.4
[0.0
6]83
.5 [3
.29]
Barcode
Product Nameplate
Input terminal
A
Bottom View
Front View
14.0
[0.5
5]12
.5 [0
.49]
38.4
±0.4
[1.5
1±0.
01]
40.5
±0.4
[1.5
9±0.
01]
86.4±0.4 [3.40±0.01]
3.2
[0.1
3]35
.0 [1
.38]
A
113142632 31 30 29 28 27
33 34 3935 36 37 38 6451 52
Top View
Bottom View
P1 (GND)
P3 (GND)
P2(12V)
P4(12V)
S1
S7
S6
S12
Pin Signal Description Pin Signal Description 01–13, 52–64 12 V 12 V primary output 32 SCL I2C clock cable
14–26, 39–51 GND 12 V and 12VSB ground 33 PSON Signal that remotely controls the on/off of the 12 V output
27 A2 I2C address signal 2 34 I-MON Current share signal 28 A1 I2C address signal 1 35 PSOK 12 V primary output normal 29 A0 I2C address signal 0 36 PRESENT Power module presence signal (short pin)30 GND I2C signal ground 37 12VSB Power supply standby output 31 SDA I2C data cable 38 PS_InTERRUPT I2C interruption signal
Model Input Voltage Output Voltage Output Current Output Power Efficiency PAC750D1212-TE 180–264 V AC, 180–300 V DC 12 V/12 V 62.5 A/2 A 750 W 96%
Communication Custom Power
47
Introduction
Specifications
Features• Input undervoltage protection• Input overvoltage protection•Output overvoltage protection•Output short circuit protection•Output overcurrent protection•Overtemperature protection•Supports PMBus communications
protocol•Applicable to TT, TN, IT power
distribution systems•N+1 redundancy (N ≤ 5)•Parallel connections between
multiple modules
The rack server Platinum power module series provides two power levels: 750 W and 460 W. The series supports AC and HVDC inputs, N+1 redundancy, and hot swapping. It also supports PMBus communication and related protection functions. Its surge protection mechanism complies with IEC/EN61000-4-5. The rack server power series can be applied to servers, storage equipment, high performance and reliability servers, routers, network switches, and telecom equipment.
Rack Server Platinum Efficiency Series
Parameter Model Value Notes & Conditions Output characteristics
Output voltage range All 11.85–12.45 V
11.4–12.6 V@12VSB
Vin = 90–264 V AC;Pout = MaxVin = 192–288 V DC;Pout = Max
Output power
PAC750D1212-CE 750 W Vin = 90–264 V AC;Pout = MaxVin = 192–288 V DC;Pout = Max
PAC460D1212-CE 460 W Vin = 90–264 V AC;Pout = MaxVin = 192–288 V DC;Pout = Max
Regulated voltage precision All 3% Applicable for full range
Output voltage ripple (pk-pk) All 120 mV
Oscilloscope bandwidth:
20 MHz Input characteristics
Input voltage All 90–264 V AC@50/60 Hz; 192–288 V DC
Maximum input current
PAC750D1212-CE 10 A Vin = 230 V AC; Pout = 750 W PAC460D1212-CE 6 A Vin = 230 V AC; Pout = 460 W
Power factor All 0.97 Vin = 230 V AC; Pomax
Protection characteristics Input undervoltage protection All Turn-on: 89 V AC
Turn-off: 84 V AC Hysteresis: 5 V
Input overvoltage protection All Turn-on: 275 V AC
Turn-off: 280 V AC Hysteresis: 5 V
Output overvoltage protection All 15 V Latch-off
Output overcurrent protection
PAC750D1212-CE 73–93 A, 2.5–3 A Latch-off
PAC460D1212-CE 43–53 A, 2.5–3 A
Overtemperature protection All 55°C Self-recovery
Absolute maximum ratings Ambient operating temperature All –5°C to +55°C
Storage temperature All –40°C to +85°C Other characteristics
PMBus communication All
Monitoring of input voltage/current/power and output voltage/current/power; alarming
Surge protection All Differential mode: 2.5 kV; common mode: 2.5 kV
IEC61000-4-5 compliant
MTBF All 500,000 hours Telcordia SR332, 80% load,300 LFM, TA = 40°C
48
Communication Custom Power
Rack Server Platinum Efficiency Series
Models
Pin Description
Tolerances±0.50 [0.020 in.] (≤ 63 [2.48])±1.00 [0.040 in.] (> 63 [2.48])
Mechanical DiagramUnit: mm [in.]
Left View
196.5±0.5 [7.74±0.01]1.
6 [0
.06]
Right View
31.0 [1.22] 190.5±0.5 [7.50±0.01]
8.3
[0.3
3]
Top View
227.0 [8.94]
194.2±0.4 [7.64±0.01]11.4 [0.44]
1.4
[0.0
6]83
.5 [3
.29]
Barcode
Product Nameplate
Input terminal
A
Bottom View
Front View
14.0
[0.5
5]12
.5 [0
.49]
38.4
±0.4
[1.5
1±0.
01]
40.5
±0.4
[1.5
9±0.
01]
86.4±0.4 [3.40±0.01]
3.2
[0.1
3]35
.0 [1
.38]
A
113142632 31 30 29 28 27
33 34 3935 36 37 38 6451 52
Top View
Bottom View
P1 (GND)
P3 (GND)
P2(12V)
P4(12V)
S1
S7
S6
S12
Pin Signal Description Pin Signal Description 01–13, 52–64 12 V 12 V primary output 32 SCL I2C clock cable
14–26, 39–51 GND 12 V and 12VSB ground 33 PSON Remotely controls the on/off of 12 V primary output
27 A2 I2C address signal 2 34 I-MON Current share signal
28 A1 I2C address signal 1 35 PSOK 12 V primary output normal
29 A0 I2C address signal 0 36 PRESENT Power module presence signal (short pin)
30 GND I2C signal ground 37 12VSB Power supply standby output
31 SDA I2C data cable 38 PS_InTERRUPT I2C interruption signal
Model Input Voltage Output Voltage Output Current Output Power Efficiency PAC750D1212-CE 90–264 V AC, 192–288 V DC 12 V/12 V 62.5 A/2 A 750 W 94% PAC460D1212-CE 90–264 V AC, 192–288 V DC 12 V/12 V 38.3 A/2 A 460 W 94%
Communication Custom Power
49
Introduction
Specifications
Features•Output overvoltage protection•Output short circuit protection•Output overcurrent protection•Overtemperature protection•Supports I2C communications
protocol•Hot-swappable•Applicable to TT, TN, IT power
distribution systems•N+1 redundancy
The PAC500D5412-CE enclosed, swappable AC-DC POE power can operate over an input voltage range of 90–290 V AC. Two outputs, 53.5 V and 12 V, are isolated, and the total output power is 500 W (53.5 V DC/380 W; 12 V/120 W). Heat is dissipated by the fan through front and rear air channels. The surge protection mechanism complies with IEC61000-4-5 and ITU-TK.21. The power module can be applied to switches, routers, and access devices that require 12 V and 48 V dual power supplies.
PAC500D5412-CE
Parameter Model Value Notes & Conditions Output characteristics
Output voltage range PAC500D5412-CE 51.89–55.11 V
11.4–12.6 V
Output power PAC500D5412-CE 53.5 V@380 W 12 V@120 W
Regulated voltage precision PAC500D5412-CE
53.5 V@±3% Vin = 90–290 V AC;Pout = 500 W12 V@±5%
Line regulation PAC500D5412-CE ± 1% Vin = 90–290 V AC;Pout = 500 W
Load regulation PAC500D5412-CE ± 3% Vin = 220 V AC;Pout = 0–500 W
Output voltage ripple (pk-pk) PAC500D5412-CE 53.5 V@500 mV
12 V@200 mV Oscilloscope bandwidth: 20 MHz
Input characteristics
Input voltage PAC500D5412-CE 90–290 V AC@50/60 Hz
Maximum input current PAC500D5412-CE 7 A
Power factor PAC500D5412-CE 0.95 Vin = 220 V AC/110 V AC; 100% load
Protection characteristics Output overvoltage protection PAC500D5412-CE For 53.5 V: 57–60 V
For 12 V: 13.4–15 V Latch-off
Output overcurrent protection PAC500D5412-CE For 53.5 V: 8–10 A
For 12 V: 12–16 A Latch-off
Overtemperature protection PAC500D5412-CE 70°C Self-recovery
Absolute maximum ratings Ambient operating temperature PAC500D5412-CE –25°C to +55°C
Storage temperature PAC500D5412-CE –40°C to +85°C
Other characteristics
I2C communication PAC500D5412-CE
Monitoring of input voltage/current/power and output voltage/current/power; alarming
Surge protection PAC500D5412-CE Differential mode: 6 kV; common mode: 6 kV
IEC61000-4-5 and ITU- TK.21 compliant
MTBF PAC500D5412-CE 250,000 hours Telcordia SR332, Vin = 220 V AC, 100% load, TA = 25°C
50
Communication Custom Power
PAC500D5412-CE
Models
Pin Description
Tolerances± 0.50 [0.02 in.] (≤ 63 [2.48])± 1.00 [0.04 in.] (> 63 [2.48])
Mechanical DiagramUnit: mm [in.]
38.9 [1.53]
58.4 [2.30]66.9 [2.63]
18.0 [0.71] 10.0 [0.39] 9.3[0.37]195.4±0.2 [7.69±0.00]
21.0 [0.83]
57.2 [2.25]90.0±0.2 [3.54±0.00]
3.6 [0.14]14.6 [0.57]
10.0 [0.39]
87.0 [3.43]
Top View
Bottom View
Right View
Grounding
Output connector
Back View
Front View
70.6
[2.7
8]18
.7[0
.74]
4.0[
0.16
]14
.0[0
.55]
Input connector (IEC 320 C14)
61.6
[2.4
3]33
.6[1
.32]
21.2 [0.83]
36.7 [1.44]31.2 [1.23]
43.2 ±0.2[1.70±0.00]
19.8 [0.78]6.4 [0.25]
30.0 [1.18]39.8±0.2 [1.57±0.00]
Pin Signal Description Pin Signal Description Pin Signal Description
P1 48 V+ 53.5 V DC output A5 PS_KILL Short pin, power module hot swap
signal C5 A1 I2C EEPROM
address
P2 48 V– 53.5 V DC output B1, B2, B3 NC C6 PRESENT Presence signal
P3 12 V+ 12 V DC output B4 WP Pin that controls whether E-label
write protection is enabled
D1, D2 NC
P4 12 V GND 12 V DC output B5 NC D3 PG-12 V Signal indicating 12 V power normal/faulty
A1, A2, A6 NC B6 A2 I2C EEPROM
address D4 3.3 V 3.3 V power from system board to supply to I2C chip inside the power module
A3 Share-48 V 48 V load sharing C1, C2, C3 NC D5 I2C-SDA I2C data signal
A4 PG-48 V Signal indicating
48 V power normal/faulty
C4 A0 I2C EEPROM address D6 I2C-SCL I2C clock signal
Model Input Voltage Output Voltage Output Current Output Power Efficiency PAC500D5412-CE 90–290 V AC 53.5 V, 12 V 7.1 A, 10 A 500 W 87%
Communication Custom Power
51
PAC/PHD-1K2WA Series
Introduction
Specifications
Features• Input overvoltage protection•Output overvoltage protection•Output short circuit protection•Output overcurrent protection•Overtemperature protection•Supports I2C communications
protocol•Hot-swappable•Applicable to TT, TN, IT power
distribution systems•N+1 redundancy
The PAC/PHD-1K2WA series efficiently converts AC or HVDC input into DC power. The modules can operate over a voltage range of 90–290 V AC, and 188–400 V DC, providing a total rated output power of 1200 W. The series supports protection functions related to I2C communication. Heat is dissipated by the fan through front and rear air channels. The surge protection mechanism complies with IEC61000-4-5 and ITU. The series can be applied to switches and routers.
Parameter Model Value Notes & Conditions Output characteristics
Output voltage range PAC-1K2WA PHD-1K2WA
11.64–12.36 V 3.0–3.8 V
Output power PAC-1K2WA PHD-1K2WA 1200 W Vin = 176–290 V AC
Vin = 188–290 V DC PAC-1K2WA 800 W Vin = 90–176 V AC
Regulated voltage precision
PAC-1K2WA PHD-1K2WA ± 3% Applicable for full range
Line regulation PAC-1K2WA PHD-1K2WA ± 1% Vout = 12 V
Load regulation PAC-1K2WA PHD-1K2WA ± 3% Vout = 12 V
Output voltage ripple (pk-pk)
PAC-1K2WA PHD-1K2WA
200 mV Oscilloscope bandwidth: 20 MHz 300 mV
Input characteristics
Input voltage PAC-1K2WA 90–290 V AC@50/60 Hz
PHD-1K2WA 188–400 V DC
Power factor PAC-1K2WA 0.99 Vin = 220 V AC/110 V AC; 100% load
Protection characteristics
Input overvoltage protection
PAC-1K2WA Turn-on: 290–300 V AC Turn-off: 300–310 V AC Self-recovery hysteresis: 5 V
PHD-1K2WA Turn-on: 400–415 V DC Turn-off: 410–425 V DC Self-recovery hysteresis: 5 V
Output overvoltage protection
PAC-1K2WA PHD-1K2WA 13.8–16 V Latch-off
Output overcurrent protection
PAC-1K2WA PHD-1K2WA 110–125 A Hiccup mode, self-recovery
Overtemperature protection
PAC-1K2WA PHD-1K2WA 50°C Self-recovery hysteresis: 5 V
Absolute maximum ratings Ambient operating temperature
PAC-1K2WA PHD-1K2WA –25°C to +55°C
Storage temperature PAC-1K2WA PHD-1K2WA –40°C to +85°C
Other characteristics
I2C communication PAC-1K2WA PHD-1K2WA
Monitoring of input voltage/current/power and output voltage/ current/power; alarming
Surge protection PAC-1K2WA PHD-1K2WA
Differential mode: 2 kV; common mode: 4 kV IEC61000-4-5 compliant
Differential mode: 2.5 kV; common mode: 2.5 kV
ITU-T compliant
MTBF PAC-1K2WA PHD-1K2WA 250,000 hours Telcordia SR332, Vin = 220 V
AC, 100% load, TA = 25°C
52
Communication Custom Power
PAC/PHD-1K2WA Series
Models
Pin Description
Tolerances± 0.50 [0.020 in.] (≤ 63 [2.48])± 1.00 [0.040 in.] (> 63 [2.48])
Mechanical DiagramUnit: mm [in.]
PAC-1K2WAPHD-1K2WAFront View Front View
Top View
Left View
Back View
A
B
C(2:3)
B
B(1:1)
A(1:2)
Model Input Voltage Output Voltage Output Power Efficiency PAC-1K2WA 90–290 V AC, 188–290 V DC 12 V 1200 W 94%PHD-1K2WA 188–400 V DC 12 V 1200 W 94%
Pin Signal Description Pin Signal Description P1, P2, P3 GND 12 V output ground B1 A2 I2C EEPROM address
D1 A0 I2C EEPROM address B3 3V3 3.3 V power system D2 I2C-SDA I2C data signal B4 Alarm Input disconnection alarm D3 N/A Reserved A2 Pr Power supply D4 I_SHARE 12 V current share signal A3 PSKILL Short pin C1 A1 I2C EEPROM address P4, P5, P6 12 V 12 V output C2 I2C-SCL I2C clock signal A1, A4, B2, C3 N/A C4 PG 12 V normal/failed
Communication Custom Power
53
PHB3000S53V5-CB
Introduction
Specifications
Features• Input overvoltage protection•Output overvoltage protection•Output short circuit protection•Output overcurrent protection•Overtemperature protection•Supports CAN communications
protocol•Hot-swappable•Applicable to TT, TN, IT power
distribution systems•N+1 redundancy
The PHB3000S53V5-CB is a highly efficient power module that supports an AC input of 90–290 V and an HVDC input of 188–400 V. It provides an output voltage of 53.5 V DC and rated output power of 3000 W. Heat is dissipated by the fan through front and rear air channels. The surge protection mechanism complies with IEC61000-4-5. The module can be applied to switches and routers.
Parameter Model Value Notes & Conditions Output characteristics
Output voltage 53–54 V DC
Output power PHB3000S53V5-CB 3000 W Vin = 170–290 V AC,
188–400 V DC
1500 W Vin > 170 V AC
Regulated voltage precision PHB3000S53V5-CB ± 1% Applicable for full range
Line regulation PHB3000S53V5-CB ± 1% Vout = 53.5 V DC
Load regulation PHB3000S53V5-CB ± 1% Vout = 53.5 V DC, Iout > 1 A
Output voltage ripple (pk-pk) PHB3000S53V5-CB
200 mV Oscilloscope bandwidth: 20 MHz 300 mV
Input characteristics
Input voltage PHB3000S53V5-CB 90–290 V AC@50/60 Hz
188–400 V DC
Power factor PHB3000S53V5-CB 0.99 Vin = 208 V AC, 220 V AC, 230 V AC, 240 V AC (50/60 Hz), 100% load
Protection characteristics
Input overvoltage protection PHB3000S53V5-CB
Turn-on: 290–300 V ACTurn-off: 300–310 V AC Self-recovery hysteresis:
5 V Turn-on: 400 V DC Turn-off: 410 V DC
Output overvoltage protection PHB3000S53V5-CB 57–60 V Latch-off
Output overcurrent protection PHB3000S53V5-CB 60–70 A
Overtemperature protection PHB3000S53V5-CB 60°C Self-recovery
Absolute maximum ratings Ambient operating temperature PHB3000S53V5-CB –5°C to +55°C
Storage temperature PHB3000S53V5-CB –40°C to +70°C
Other characteristics
CAN communication PHB3000S53V5-CB
Monitoring of input voltage/current/power and output voltage/current/power; alarming
Surge protection PHB3000S53V5-CB Differential mode: ±2 kV; common mode: ±2 kV
IEC61000-4-5 compliant
MTBF PHB3000S53V5-CB 250,000 hours Telcordia SR332, Vin = 220 V AC, 240 V DC, 380 V DC, 100% load, TA = 25°C
54
Communication Custom Power
PHB3000S53V5-CB
Models
Pin Description
Tolerances±0.50 [0.020 in.] (≤ 63 [2.48])±1.00 [0.040 in.] (> 63 [2.48])
Mechanical DiagramUnit: mm [in.]
Model Input Voltage Output Voltage Output Current Output Power Efficiency PHB3000S53V5-CB 90–290 V AC, 188–400 V DC 53.5 V 56.1 A 3000 W 95.5%
Pin Signal Description Pin Signal Description Pin Signal Description A1 ON/OFF3 Output control switch 3 B4 ON/OFF2 Output control switch 2 D5 ADDR4 Address 4
A2 ON/OFF4 Output control switch 4 B5 ON/OFF1 Output control switch 1 D6 ADDR0 Address 0
A3 NC B6 ADDR2 Address 2 E1 CAN_H_1 H channel 1
A4 Ishare+ Current share + C1, C2, C3, C4 NC E2,
E4 NC
A5 Ishare– Current share – C5 ADDR5 Address 5 E3 CAN_H_0 H channel 0
A6 ADDR3 Address 3 C6 ADDR1 Address 1 E5 ENABLE Output enable
B1 Present Presence signal D1 CAN_L_1 L channel 1 E6 ADDR_GND
Address ground
B2 GND Ground D2, D4 NC B3 NC D3 CAN_L_0 L channel 0
Copyright © Huawei Technologies Co., Ltd. 2016. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd.
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders.
The information in this document may contain predictive statements including, without limitation, statements regarding the future financial and operating results, future product portfolio, new technology, etc. Therefore, such information is provided for reference purposes only and constitutes neither an offer nor an acceptance. Huawei may change the information at any time without notice.
Huawei Technologies Co., Ltd.
Huawei Industrial BaseBantian, LonggangShenzhen 518129
People's Republic of ChinaVersion number: 20160708-A-1.0
www.huawei.com
Trademarks Notice
Disclaimer