Mobile machines

2

Table of conTenTsTERMINATOR 4 - 5

CRAMBO 6 -7

CHIPPO 510 C 8 - 9

CHIPPO 5010 CD / 5010 C / 7010 C 10 - 11

JOKER 12 - 13

PRIMUS 14 - 15

MAXX 16 - 17

MUSTANG 18 - 19

CRIBUS 3800 20 - 21

MAGNUM 22 - 23

EASYSTAR 24 - 25

MULTISTAR M3 / M2 26 - 27

MULTISTAR L3 / L2 28 - 29

MULTISTAR L3 FLOWERDISC 30 - 31

MULTISTAR XL / XXL 32 - 33

SPLITTER 34 - 35

HURRIKAN 36 - 37

TOPTURN X 38 - 39

Single-shaft shredder

Dual-shaft shredder

Chipper

Drum screens

Star screens

Spiral shaft separator

Windsifter

Windrow turner

SHREDDING

SCREENING

SIFTING

TURNING TECHNOLOGY

Komptech GmbhKomptech is a leading international technology supplier of machinery and systems for the mechanical and biological treatment of solid waste and for the treatment of biomass as a renewable energy source.Komptech’s product portfolio includes more than 30 different machine types, enabling the company to be active in the fields of competence treatment of solid waste and treatment of biomass.Komptech products cover the major processing steps of modern waste treatment and biomass processing, namely shredding technology, screening and separation technology and composting technology.Modular construction offering different performance categories simplifies combinations for complete systems.Always the focus: innovative technology and solutions that provide a maximum of benefit for the customers.

4

5

TERMINATOR Slow-speed single-shaft shredder - pre-shredding

ShreddinG

Drive diesel motor

Type:Number of cylinders:Power:

6825 x 2470 x 2650 mm

7980 x 2550 x 3235 mm

6580 x 2850 x 3155 mm

6825 x 2470 x 2650 mm

7980 x 2550 x 3235 mm

6580 x 2850 x 3155 mm

6825 x 2470 x 2650 mm

7980 x 2550 x 3235 mm

6580 x 2850 x 3155 mm

~ 19400 kg~ 21600 kg~ 24800 kg

~ 20400 kg~ 22600 kg~ 25800 kg

~ 21300 kg~ 23500 kg~ 26700 kg

2465 mm2905 mm2920 mm

2465 mm2905 mm2920 mm

2465 mm2905 mm2920 mm

3000 mm1050 mm

max. 30 min -1

3000 mm1050 mm

max. 32 min -1

3000 mm1050 mm

max. 38 min -1

Caterpillar® C136

328 kW/446 HP

Caterpillar® C136

328 kW/446 HP

Caterpillar® C186

429 kW/583 HP

Cutter / drum

Length:Diameter:rpm:

Loading heights

Fill height:hooktrailertrack

max. discharge height (at 35° inclination):hooktrailertrack

Transport dimensions

L x W x H hook

L x W x H trailer L x W x H track

Weight

hooktrailertrack

Caterpillar® C96

242 kW/330 HP

3000 mm1050 mm

max. 30 min -1

2465 mm2905 mm2920 mm

~ 19800 kg~ 22000 kg~ 25200 kg

6825 x 2470 x 2650 mm

7980 x 2550 x 3235 mm

6580 x 2850 x 3155 mm

Caterpillar® C96

242 kW/330 HP

3000 mm1050 mm

max. 30 min -1

2465 mm2905 mm2920 mm

~ 18800 kg~ 21000 kg~ 24200 kg

6825 x 2470 x 2650 mm

7980 x 2550 x 3235 mm

6580 x 2850 x 3155 mm

to 60 t/h to 80 t/h to 100 t/hThroughput (dependent on material) to 50 t/hto 45 t/h

Technical specification 3400 3400S 5000 5000S 6000S

Roller drive on both sides

Roller drive on both sides

Roller drive on both sides

The TERMINATOR is a slow-speed single-shaft shredder for all types of waste. Robust teeth mounted on the shredding rotor and an opposing counter comb can produce coarse pre-crushing to a defined shredding size. The continuous cutting gap adjustment allows tailoring of the particle size produced to suit its subsequent use. A hydraulic drive with load-dependent speed control ensures maximum utilisation of the motor performance. The hook lift platform, tri-axle chassis and steel tracks with hydraulic drive options provide the desired degree of mobility.

• Shredding of the most difficult materials

• Rugged design as pre-shredder provides high degree of shredding

• Variable particle size by adjusting cutting gap

• Hydraulic drive with overload protection provides high level of protection against contaminants

3645 mm4140 mm4115 mm

3645 mm4140 mm4115 mm

3645 mm4140 mm4115 mm

3645 mm4140 mm4115 mm

3645 mm4140 mm4115 mm

6

7

Drive diesel motor

Type:Number of cylinders:Power:

6825 x 2470 x 2650 mm

7980 x 2550 x 3235 mm

6580 x 2850 x 3155 mm

6825 x 2470 x 2650 mm

7980 x 2550 x 3235 mm

6580 x 2850 x 3155 mm

~ 20300 kg~ 22400 kg~ 25700 kg

~ 21200 kg~ 23400 kg~ 26600 kg

3645 mm4140 mm4115 mm

3645 mm4140 mm4115 mm

22820 mm610 mm

max. 36 min -1

13480, 100, 125, 150, 180, 250, 300

Caterpillar® C136

328 kW/446 HP

Caterpillar® C186

429 kW/583 HP

Shredding tools

Number of screws:Length:Diameter:rpm:Cutting elements:Screen basket hole size (in mm)

Loading heights

Fill height:hooktrailertrack

max. discharge height (at 35° inclination:hooktrailertrack

Transport dimensions

L x W x H hookL x W x H trailer L x W x H track

Weight

hooktrailertrack

Caterpillar® C96

242 kW/330 HP

22820 mm610 mm

max. 38 min -1

13480, 100, 125, 150, 180, 250, 300

3645 mm4140 mm4115 mm

~ 19200 kg~ 21400 kg~ 24600 kg

6825 x 2470 x 2650 mm

7980 x 2550 x 3235 mm

6580 x 2850 x 3155 mm

to 60 t/h to 100 t/hThroughput (dependent on material) to 45 t/h

Technical specification 3400 5000 6000 The CRAMBO dual-shaft shredder shreds all types of wood and green waste to a fixed particle size. Slow-running screws with shredding tools minimise the fine particle and noise/dust emissions and increase resistance to contaminants. The particle size generated is adjustable by simply exchanging screen baskets. A hydraulic drive with load-dependent speed control ensures maximum utilisation of the motor performance. The hook lift platform, tri-axle chassis and steel tracks with hydraulic drive options provide the desired degree of mobility.

• High throughputs with general-purpose use

• Aggressive feed with 2820 mm long, counter-rotating shredding drums

• Variable particle size spectrum with less overlengths and low level of fine fraction

• Quick-change system for screen basket and tools – screen basket change in minutes

22820 mm610 mm

max. 41 min -1

13480, 100, 125, 150, 180, 250, 300

2465 mm2905 mm2920 mm

2465 mm2905 mm2920 mm

2465 mm2905 mm2920 mm

CRAMBO High torque slow speed dual-shaft shredder

ShreddinG

8

9

The CHIPPO 510 C is a tractor-driven drum chipper for prunings and wood trunks. The active feed system, two different rotation speeds of drum and the choice of material discharge via blower or conveyor belt make the machine a perfect all-rounder. The robust design and the use of premium components make a drive rating of up to 500 HP possible. This guarantees a throughput (output) up to 180 m³/h and that with highest product quality.

• Aktive feed with pre-compression due to two horizontal and two vertical feed drums

• Two principles of chipping: high speed for pruning, lower speed for wood trunks

• Innovative cutter mounting system with integrated automatic re-sharpening equipment

• Choice of discharge: - Conveyor belt to save energy and preserve end product quality - Flexible and precise discharge via blower with variable rotation speed

CHIPPO 510 C Drum chipper

ShreddinG

Drive

Throughput

Trunk wood hard:Trunk wood soft:Throughput (depending on material):

Chipping unit / Rotor

Length:Diameter:Feeder width:

Feeder height:Drum rotation speed:Number of blades:

Transport position

L x W x H: (without conveyor belt)

Loading heights

Fill height:Length of feed table:Discharge height of conveyor belt:Exaust pipe length:max. hight exaust pipe:Discharge range:

Drive via PTO Tractor up to 370 kW / 500 HP

to ø560 mmto ø750 mmto 180 m3/h

1640 mm2515 mm4700 mm

1500 or 2500 mm5370 mm

20 m

7167 x 2550 x 3722 mm

Technical specification

1000 mm1050 mm1000 mm

1610 mm with vertical feeder drums750 mm

400 and 560 rpm12

Weight(with conveyor belt and cran)

~ 18000 kg

10

11

Expansion of the CHIPPO family is proceeding onwards. In the high-end performance range, the new CHIPPO 7010 C represents a mobile, high-performance chipper that has a large movement of radius when mounted on a 4-axle lorry and that delivers the highest of throughputs with a self-propulsion system rated at 700 HP – even with strong wood trunks. This requirement is met perfectly by the CHIPPO 5010 C in the mid-performance range. Another compact general-purpose talent, barely surpassable in terms of mobility, degree of working comfort and cost-effectiveness, goes by the name of CHIPPO 5010 CD – here the drive power is delivered directly via a special drive by a 3-axle lorry (MAN). Common to all of them are active feed system, material adjustment with two different drum speeds and selection of material discharge via blower or conveyor belt.

CHIPPO 5010 CD / CHIPPO 5010 C / CHIPPO 7010 C Drum chipper

ShreddinG

Drive

Power rating:

Throughput (dependent on material):

Chipping unit / Rotor

Length:Diameter:Feed width:

Feed height:Drum rotation speed:Number of blades:

Transport position

L x W x H: (without conveyor belt)

Loading heights

Fill height:Length of feed table:Discharge height of conveyor belt:Discharge range:

via lorry diesel engine (MAN)with special power divider

353 kW / 480 HP

to 220 m3/h

1910 mm2515 mm

~ 5 m20 m

8031 x 2550 x 4000 mm

Technical specification 5010 CD 5010 C 7010 C

1000 mm1050 mm1000 mm

1610 mm with vertical feeder drums750 mm

400 and 560 rpm12

Weight(without conveyor belt )

< 26000 kg

Splitter

Splitting force:Splitting depth:

max. 40 t1300 mm

Diesel engine Caterpillar® C13 328 kW / 446 HP

to 220 m3/h

1870 mm2515 mm~ 4,7 m

20 m

9200 x 2550 x 4020 mm

1000 mm1050 mm1000 mm

1610 mm with vertical feeder drums 750 mm

400 and 560 rpm12

32000 kg

max. 45 t1300 mm

Diesel engine Caterpillar® C18522 kW / 710 HP

to 300 m3/h

1870 mm2515 mm~ 4,7 m

20 m

9200 x 2550 x 4020 mm

1000 mm1050 mm1000 mm

1610 mm with vertical feeder drums750 mm

400 and 560 rpm12

32000 kg

max. 45 t1300 mm

• Aktive feed with pre-compression due to two horizontal and two vertical feed drums

• Two principles of chipping: high speed for pruning, lower speed for wood trunks

• Large chipping rotor (1050 mm) for precise cutting – even with strong wood trunks

• Innovative options: hydraulic wood splitter and re-sharpening mechanism

12

13

Drive diesel motor

1800 mm2440 mm

10 m2

16,5 kW

Machine dimensionsTransport position L x W x H:Total permissible weight:

Screening drumDiameter:Length:Screening area:

Feed hopper Volume:Filling length:Filling width:Infeed height:

to 35 m3/hThroughput (dependent on material)

Technical specification The JOKER screening machine is an entry-level product in the world of professional screening technology. Ease of manoeuvring (mounted on a single-axle trailer) as well as compact and robust construction are distinguishing features of the JOKER. The drum screen machine is an excellent solution for gardening and landscaping, for smaller composting sites and everywhere where mobile screen technology is used.

• Sturdy frame, mounted on easily manoeuvrable single-axle trailer

• Opposing discharge belts for fine and oversized particles reduce space requirement

• Either screen drum with fixed hole size or flexible system (core drum with quick-change screen segments)

7650 x 2550 x 3800 mm5000 kg

> 2,3 m3

2635 mm1135 mm2350 mm

JOKER Drum screen machine

ScreeninG

14

15

Drive diesel motor

1450 mm4000 mm

16 m2

38 kW

Machine dimensionsTransport position L x W x H:Total permissible weight:

Screening drumDiameter:Length:Screening area.

Feed hopper Volume:Filling length:Filling width:Infeed height:

to 70 m3/hThroughput (dependent on material)

Technical specification For more demanding throughput and screening requirements, the PRIMUS represents the next biggest size. Boasting sturdy interchangeable components and innovative features, the screening machine excels in screening performance and operating efficiency.The PRIMUS is the right solution for smaller and mid-sized composting and treatment plants, as well as for the introduction into the contracting business.

• Efficient operation with large filling hopper, steep side walls prevent bridging

• Optimal servicing with easy accessibility to all power units and simple drum change system

• Either screen drum with fixed hole size or flexible system (with quick-change screen segments)

9750 x 2550 x 4000 mm9000 kg

> 3,0 m3

2900 mm1340 mm2640 mm

PRIMUS Drum screen machine

ScreeninG

16

17

DriveDiesel motor: Power input: Diesel generator:

1800 mm4500 mm22,5 m2

62,5 kW--

Machine dimensionsTransport position L x W x H:Total permissible weight:

Screening drumDiameter: Length: Screening area:

Feed hopper Volume:Filling length:Filling width:Infeed height:

to 120 m3/hThroughput (dependent on material)

Technical specification MAXX MAXX E The MAXX drum screen machine was conceived for use in mid to large-sized composting plants. Its rugged structure and high-performance components make it suitable for almost any screen application and it represents a professional solution for contracting companies. Extremely rugged hopper design, hydraulic straight line travel control of the hopper belt and automatic fill level control for the screen drum ensure smooth operation. The MAXX E electric version is particularly energy efficient.

11250 x 2550 x 4000 mm16000 kg

> 5,0 m3

4000 mm1675 mm2800 mm

• DRUMGRIP drive concept with robustness of a chain and quietness of a friction drive

• Options: - Drum screen with fixed mesh size - Flexible system with changeable screen segments - Special drum with anti-soil bars for residual waste screening

• MAXX integral option: combination of drum screen and compact separator for light contaminants

MAXX Drum screen machine

ScreeninG

1800 mm4500 mm22,5 m2

-26 kW53 kVA

to 120 m3/h

11250 x 2550 x 4000 mm16000 kg

> 5,0 m3

4000 mm1675 mm2800 mm

18

19

DriveDiesel motor: Power input: Diesel generator:

2000 mm5500 mm

30 m2

70 kW--

Machine dimensionsTransport position L x W x H: Total permissible weight:

Screening drumDiameter: Length: Screening area:

Feed hopper Volume:Filling length:Filling width:Infeed height:

to 160 m3/hThroughput (dependent on material)

Technical specification MUSTANG MUSTANG S MUSTANG E MUSTANG SE Continuous performance in tough conditions characterises the MUSTANG. The MUSTANG’s excellent performance is well suited to address a wide range of applications in large plants where high throughputs and screening are required. Rugged, reliable and equipped with modern motor technology and a high level of operator comfort, the MUSTANG meets even the highest demands of customers. A version of the MUSTANG S is available with a higher power rating on request. The MUSTANG E electric version is particularly energy efficient.

• DRUMGRIP drive concept with robustness of a chain and quietness of a friction drive

• >5 m3 hopper capacity for continual working, 30 m2 screen area and 1m wide discharge belts (MUSTANG S) for high throughputs

• Options: - Screen drum with fixed hole size - Flexible system with exchangeable screen segments - Special drum with anti-dirt strips for screening residual waste

11950 x 2550 x 4000 mm 16000 kg

> 5,0 m3

4000 mm1675 mm2800 mm

2000 mm5500 mm

30 m2

96,5 kW--

to 160 m3/h

11950 x 2550 x 4000 mm 16000 kg

> 5,0 m3

4000 mm1675 mm2800 mm

MUSTANG Drum screen machine

ScreeninG

2000 mm5500 mm

30 m2

-30 kW53 kVA

to 160 m3/h

11950 x 2550 x 4000 mm 16000 kg

> 5,0 m3

4000 mm1675 mm2800 mm

2000 mm5500 mm

30 m2

-30 kW53 kVA

to 160 m3/h

11950 x 2550 x 4000 mm 16000 kg

> 5,0 m3

4000 mm1675 mm2800 mm

20

21

2200 mm6000 mm

38 m2

Machine dimensionsTransport position L x W x H:Total permissible weight:

Screen drumDiameter:Length:Screening area:

Feed hopper Volume:Filling length:Filling width:Infeed height:

to 225 m3/hThroughput (dependent on material)

Technical specification

• Largest mobile drum screen as a central axle trailer

• Electrical drive of all components for highest energy efficiency

• New drum drive concept without chain via patented “WHEELGRIP“

• High degree of maintainability with optimal accessibility and no-maintenance solutions

11950 x 2550 x 4000 mm 18000 kg

> 5,0 m3

> 4000 mm1675 mm2950 mm

CRIBUS 3800 Drum screen machine

ScreeninG

The CRIBUS 3800 redefines the term mobile drum screen. Numerous innovations create a machine with the highest level of functionality and cost-effectiveness and at the same time set new benchmarks. The drive system represents the foundation for the extremely high degree of cost-effectiveness - everything on the CRIBUS is driven electrically, from the hopper to the discharge belts. This minimizes the energy, wear and servicing costs of the whole machine, supported by the newly developed direct "WHEELGRIP" drum drive.

30 kW53 KVA

3

DriveElectrical power input:Diesel generator:Cylinders:

22

23

Drive diesel motor

2200 mm7465 mm

47 m2

96,5 kW

Machine dimensionsTransport position L x W x H:Total permissible weight:

Screening drumDiameter: Length: Screening area:

Feed hopper Volume:Filling length:Filling width:Filling height:

to 200 m3/hThroughput (dependent on material)

Technical specification The MAGNUM is the largest mobile drum screen machine in the Komptech product range. Following a technical upgrade, the machine now boasts a functional design and impressive technical features. The drum drive, for example, has been revamped - now the smooth, low-wear Drumgrip® drive system is used on both inlet and outlet sides. Irrespective of whether the machine is used for waste screening, composting or for the treatment of biomass, the MAGNUM always delivers performance in the range of stationary drum screen systems, but with the benefits of a mobile machine - here today, there tomorrow but always ready for use immediately and hence extremely cost-effective.

14040 x 2550 x 4000 mm26000 kg

bis 7 m3

4400 mm1675 mm3100 mm

MAGNUM Drum screen machine

ScreeninG

• DRUMGRIP drive concept - robust, smooth and low-wear

• Fully mobile with 2-axle semi-trailer design

• Choice of: - Screen drum with fixed hole size - Flexible system with exchangeable screen segments - Special drum with anti-dirt bars for screening residual waste - Split screen drum for 3-fraction screening

24

25

Throughput Power input:

5863 x 1000 mm / 5,86 m²3600 mm3300 mm

12 - 27,5 kW

Machine dimensions

Transport position L x W x H:Total permissible weight:

Screen range

Length x width / area:Oversized particle discharge height:Fine particle discharge height:

Screen section (standard)

to 150 m3/hThroughput (dependent on material)

Technical specification The rugged and easily mounted EASYSTAR star screen deck separates compost, bark, biomass, etc. into oversized and undersized particles – extremely reliable and with low noise levels. With its easily mounted footrest substructure, the simple hook lift version allows quick and flexible semi-mobile use.When used in conjunction with a shredder, overlengths (shredded waste wood, green waste, root wood, etc. ) are cut off effectively, resulting in simple, cost-effective material treatment.

• Quickly deployable with mounting on a hook lift platform

• High throughput with precise selectivity – even with moist materials

• Simple speed control at the screen deck to change particle size in seconds

• Ideal for removal of overlengths in conjunction with shredder

6700 x 2500 x 2700 mm approx. 4500 kg

Undersized particles0/60...80 mm

Oversized particles> 60...80 mm

EASYSTAR Star screen machine

ScreeninG

More screen sections as option

26

27

Drive

Power input:

Drive diesel generator:

2132 x 1138 mm / 2,42 m2

3591 x 1138 mm / 4,08 m2

4100 mm

3200 mm

3200 mm

46 kW

53 kVA

Machine dimensions

Transport position L x W x H:

Working position L x W x H:

Total permissible weight:

Screen segments

Coarse screen length x width / area:

Fine screen length x width / area:

Oversized particle discharge height:

Medium particle discharge height:

Fine particle discharge height:

Screen section (standard)

to 120 m3/hThroughput (dependent on material)

Technical specification MULTISTAR M3 MULTISTAR M2 The MULTISTAR M3/M2 star screen machine offers professional technology for the mid and upper performance ranges. A high degree of mobility with mounting on two-axle central trailer, a 5 m³ loading hopper with low loading height and three separate folding discharge belts at the machine end are additional features of the M3 (M2: two fractions). The diesel-electric drive (electric available optionally) and the intelligent control with self-explanatory graphics provide a comfortable working environment. Servicing and maintenance work is simple and quick with the extendable motor unit, large side flaps and completely retractable fine screen deck.

• Separation into three-fractions (two-fractions on M2) with discharge of all fractions at the machine end

• High throughput with precise selectivity with the CLEANSTAR system

• High degree of flexibility by changing particle size in seconds

• MULTISTAR M2: separation of contaminants with an optional windsifter

11500 x 2550 x 4000 mm

13000 x 11000 x 4100 mm

17000 kg

Fine size: 0/10...25 mm

Medium size: 10...25/60...80 mm

Coarse size: > 60...80 mm

More screen section as option

> 5 m3

4000 mm

1675 mm

2800 mm

Feed hopper

Volume:

Filling length:

Filling width:

Filling height:

-

4522 x 1138 mm / 5,14 m2

3500 mm

-

3200 mm

34 kW

53 kVA

to 100 m3/h

11750 x 2550 x 4000 mm

15000 x 7000 x 4000 mm

17000 kg

Undersized particles Oversized particles

or 0/30...50 mm - > 30...50

More screen section as option

> 5 m3

4000 mm

1675 mm

2800 mm

MULTISTAR M3 / M2 Star screen machine

ScreeninG

28

29

Drive

Diesel generator:

3198 x 1200 mm / 3,83 m²

5852 x 1220 mm / 7,13 m²

3200 mmm

to 3600 mm

to 3200 mm

60 kVA

Machine dimensions

Transport position L x W x H:

Total permissible weight:

Screen segments

Coarse screen length x width / area:

Fine screen length x width / area:

Oversized particle discharge height:

Medium particle discharge height:

Fine particle discharge height:

Screen section (standard)

to 180 m3/hThroughput (dependent on material)

Technical specification MULTISTAR L3 MULTISTAR L2 Ease of operation and high-quality components mean the Multistar L3/L2 star screen mobile unit is perfect for continuous operation within large plants. Separation into three fractions (two-fractions on the L2) takes place in one operation – with wind sifting and metal separation on request. The CLEANSTAR system guarantees a high level of selectivity irrespective of material moisture. Unique flexibility with screen fractions produced – change of particle sizes is possible at the press of a button.

• Separation into three-fractions (L2: two-fractions), wind sifting, metal separation in one compact machine

• 7 m³ hopper, wide discharge belts for convenient working

• High throughput with precise selectivity – even with moist materials

• Simple speed control at the screen deck to change particle size in seconds

11400 x 2550 x 4000 mm

approx. 19000 kg

Fine size: 0/10...25 mm

Medium size: 10...25/60...80 mm

Coarse size: > 60...80 mm

More screen sections as option

approx. 7 m3

3600 mm

1250 mm

3500 mm

Feed hopper

Volume:

Filling length:

Filling width:

Filling height:

-

5863 x 1200 m / 7,03 m²

-

to 3600 mm

to 3200 mm

40 kVA

to 150 m3/h

10750 x 2550 x 4000 mm

approx. 19000 kg

Undersized particles Oversized particles

0/60...80 mm - > 60...80

More screen sections as option

approx. 7 m3

3600 mm

1250 mm

3500 mm

MULTISTAR L3 / L2 Star screen machine

ScreeninG

30

31

DriveDiesel generator:

6992 x 1250 mm / 8,74 m²5852 x 1220 mm / 7,13 m²

2650 mmto 3600 mmto 3200 mm

60 kVA

Machine dimensionsTransport position L x W x H:Total permissible weight:

Screen segmentsLength x width, coarse screen:Length x width, fine screen:Oversized particle discharge height:Medium particle discharge height:Fine particle discharge height:

Screen section (standard)

to 30 t/hThroughput (dependent on material)

Technical specification The MULTISTAR L3 FLOWERDISC is an essential requirement in the treatment of bulky and commercial waste. With the combination of disc screen and star screen, a high degree of fine inert fraction is separated, as are medium and coarse fractions for the generation of refused derived fuels - in just one operation.A conveyor belt is used for direct feed onto the 7 m FLOWERDISC deck which in turn feeds the 6 m long star screen, this ensures quality high-performance and throughput.

• Separation into three fractions in one operation

• FLOWERDISC disc screen deck system: rugged and protected from contaminants for coarse screening

• Star screen deck: with CLEANSTAR cleaning system for precise fine screening

• Fully mobile with mounting on a two-axle central trailer

11250 x 2550 x 4000 mm approx. 21000 kg

Fine size: 0 / 10...25 mm Medium size: 10...25 / 60...80 (100) mm Coarse size: > 60...80 (100) mm

MULTISTAR L3 FLOWERDISC Star screen machine with disc separator

ScreeninG

32

33

Drive

Diesel generator:

3997 x 1200 mm / 4,7 m²

5852 x 1200 mm / 7,0 m²

3000 mm

to 3600 mm

to 3200 mm

80 kVA

Machine dimensions

Transport position L x W x H:

Total permissible weight:

Screen segments

Coarse screen length x width / area:

Fine screen length x width / area:

Oversized particle discharge height:

Medium particle discharge height:

Fine particle discharge height:

Screen section (standard)

to 250 m3/hThroughput (dependent on material)

Technical specification MULTISTAR XL MULTISTAR XXL The MULTISTAR XL and XXL is the premium range of high-performance star screens available from Komptech. They have been designed for the most demanding operations where the requirements are for highest throughputs, whilst retaining the benefits of mobility. Mounting onto a two-axle semi-trailer ensures mobility. Interchangeable components for continual operation, large screen decks with wide discharge belts and appropriate motorisation all safeguard throughput. The end result: Unbeatable operational costs at full loading.

• Absolute high-performance machines for large plants

• XL 7 m³ and XXL 12 m³ hopper, 1m to 1,3 m wide discharge belts for ease of operation

• High throughput with precise selectivity – even with moist materials

• Simple speed control at the screen deck to change particle size in seconds

12850 x 2550 x 4000 mm

approx. 21000 kg

Fine particle: 0/10...25 mm

Medium particle: 10...25/60...80 mm

Oversized particles: > 60...80 mm

More screen sections as option

approx. 7 m3

3600 mm

1250 mm

3500 mm

Feed hopper

Volume:

Filling length:

Filling width:

Filling height:

5064 x 1200 mm / 6,1 m²

8911 x 1220 mm / 10,9 m²

3600 mm

to 3600 mm

to 3200 mm

97 kVA

to 400 m3/h

13700 x 2550 x 4000 mm

approx. 26000 kg

Fine particle: 0/10...25 mm

Medium particle: 10...25/60...80 mm

Oversized particles: > 60...80 mm

More screen sections as option

approx. 12 m3

4000 and 5800 mm (fillable on both sides)

1250 mm

3700 mm

MULTISTAR XL / XXL Star screen machine

ScreeninG

34

35

Machine dimensionsTransport position L x W x H:Total permissible weight:

Screen segmentsScreen shafts:Screen area: square, triangularL x W :Discharge height A:Discharge height B:Feed height:

Throughput (dependent on material)

The new SPLITTER is a compact spiral shaft separator whose features open up a wide range of applications for material difficult to screen and high in contraries. Normally positioned after a shredder, the SPLITTER separates out coarse fractions and overlengths from pre-shredded fractions. The separating cut is selectable in the range 60 to 300 mm. Depending on the variant, the efficiency of the overall process can be increased with automatic return of the coarse fractions into a shredder interfaced downstream. A further important side effect is the generation of an uniform material flow into the following treatment.

• System for separation of most difficult materials (with contraries)

• Greatest screening performance over the smallest area, screening process is completely free of blockages and wrap-arounds

• Up to 3 fractions in one operation

• Sturdy, simple and wear-resistant technology

• Low power requirement and very low noise mode of operation

DrivePower input:Drive diesel generator:

9 6 m2

2500 x 2500 mm2300 mm / 3500 mm

5500 mm2500 mm

10 kW12 kVA

at density 100 kg/m3 to 100 m3/hat density 500 kg/m3 to 80 m3/hat density 1000 kg/m3 to 60 m3/h

hook TRAILER

9000 x 2500 x 2500 mm7000 kg

9 4,5 m2

2500 x 2500 mm2300 mm / 3500 mm

5500 mm2500 mm

16,5 kW20 kVA

9000 x 2500 x 4000 mm12000 kg

SPLITTER Spiral shaft separator

SiebunG

Technical specification

Screen sections 0 - 80 / 1000 - 120 / 150

0 - 80 / 1000 - 120 / 150

36

37

to 1200 mmadjustable from 1950 mm to 2250 mm

28 kW53 kVA

Machine dimensions

Transport position length x width x height:Total permissible weight:

Feed

Width feed belt:Feed height:

to 40 m3/hThroughput (dependent on material)

Technical specification hURRIkAN hURRIkAN S The mobile HURRIKAN and HURRIKAN S high-performance windsifters allow effective cleaning of over-sized screened particles.The patented “pressure-suction” principle is used to separate lightweight materials with a high degree of selectivity. The quality of the recyclable over-sized particles can be improved by using magnet separation and separation of rolling particles.

• At high throughputs more than 90% selectivity can be achieved by precise adjustment of settings to material properties

• High-performance S-version with enlarged suction section (two suction blowers)

• Available as mobile version with integrated diesel generator or as electrically driven stationary version

• Compatible with most commercially available mobile screening units

8300 x 2550 x 4000 mm6500 kg

Drive

Power input:Diesel generator:

to 1200 mmadjustable from 1950 mm to 2250 mm

47 kW66 kVA

to 60 m3/h

11000 x 2550 x 4000 mm10000 kg

HURRIKAN Windsifter

SiftinG

38

39

5000 mm

Machine dimensions

Transport position L x W x Htrack:wheel:*wheels dismantled / crane loading

Weighttrack:wheel:

max. intake width

to 3500 m3/hThroughput (dependent on material)

Technical specification ToPTURN X53 ToPTURN X60 ToPTURN X67

5350 x 2540 x 2900 mm5350 x 3000* x 2900 mm

approx. 13200 kg approx. 12500 kg

Motor diesel motor

Type:Power:

The TOPTURN X has been designed for the highest of demands. Utilising hydrostatic drive, combined with a solid telescopic frame allows full mobility on any terrain. Optimal working conditions for the driver and ideal rotting conditions in the windrows with a large, hydraulically-driven turning drum guarantee smooth operation. The choice of three models allows the selection of the right machine size for any plant.

• wheel drive for optimal traction and quick alignment track caterpillar drive for maximum mobility on insecure ground

• TT roller for optimal windrow shape, perfect mixing (X53) X roller for high throughput, low deterioration costs

• Can immediately be brought from the transport position into the working position with pivotable cabin

• Optional: Side displacement unit for optimal site space utilisation

approx. 6,5 m2max. windrow cross-section

max. windrow height

Roller diameter

Hydrostatic traction drive

I: 0-4 km/hI: 0-4 km/h II: 0-7 km/h

Travelling gear

track:wheel:

2400 mm

1200 mm

C9242 kW / 330 HP

C9242 kW / 330 HP

6050 x 2540 x 3300 mm6050 x 3000* x 3300 mm

approx. 14700 kg approx. 14000 kg

5700 mm

2800 mm

approx. 8,5 m2

1400 mm

Hydrostatic traction drive (I standard, II optional)

I: 0-4 km/hI: 0-4 km/h II: 0-6 km/h

to 3500 m3/h

C13328 kW / 446 HP

6750 x 3000** x 3400 mm6750 x 3000** x 3400 mm

**drive, blades and service steps demounted

approx. 19000 kg approx. 19000 kg

6400 mm

3100 mm

approx. 10,5 m2

1750 mm

Hydrostatic traction drive (I standard, II optional)

I: 0-3 km/h II: 0-6 km/hI: 0-4 km/h II: 0-8 km/h

to 4500 m3/h

TOPTURN X Self-propelled compost turner for triangular windrows

turninG technoloGy

KOMPTECH GmbHA-8130 Frohnleiten, Kühau 37[t] +43 3126 505 - 0[f] +43 3126 505 - 505info@komptech.com

KOMPTECH Vertriebsgesellschaft Deutschland mbHD-59302 Oelde, Herrenstraße 7[t] +49 2522 93 45 - 0[f] +49 2522 831 841info@komptech.de

KOMPTECH UK Ltd.Forge End, Lodge Farm, Kineton, Warwickshire, CV35 0JH[t] +44 1926 64 29 72[f] +44 1926 64 29 71info.uk@komptech.com

KOMPTECH Anlagenbau GmbHA-1020 WienWehlistraße 150/ Top II[t] +43 1 219 91 31 - 0[f] +43 1 219 91 31 - 10anlagenbau@komptech.com

KOMPTECH Scandinavia ABBox 1294SE-17125 SolnaSweden[t] +46 8 519 33 - 000[f] +46 8 519 33 - 149info@komptech.se

VergärungTechnology for a better environment

www.komptech.com

Technical information is subject to change due to continued development. E-04-2010

Komptech GmbHKühau 37A-8130 Frohnleiten[t] +43 3126 505 - 0[f] +43 3126 505 - 505[e] info@komptech.com

Komptech UK Ltd.Forge End, Lodge Farm, Kineton, Warwickshire, CV35 0JH[t] +44 1926 64 29 72[f] +44 1926 64 29 71[e] info.uk@komptech.com