htst and the feed expander
DESCRIPTION
Choosing the correct pre-treatment for your compound can be crucial for your feed output. The Feed Expander is in many ways capable of bringing your feed pellets to a higher quality level as well as improving your production process and flow.TRANSCRIPT
NEXT PAGE
Grain & Feed Milling Technology is published six times a year by Perendale Publishers Ltd of the United Kingdom.All data is published in good faith, based on information received, and while every care is taken to prevent inaccuracies, the publishers accept no liability for any errors or omissions or for the consequences of action taken on the basis of information published. ©Copyright 2010 Perendale Publishers Ltd. All rights reserved. No part of this publication may be reproduced in any form or by any means without prior permission of the copyright owner. Printed by Perendale Publishers Ltd. ISSN: 1466-3872
Digital Re-print - March | April 2011 HTST and the Feed Expander
www.gfmt.co.uk
Choosing the correct pre-treatment for your compound can be crucial for your feed output. The Feed
Expander is in many ways capable of bringing your feed pellets to a higher quality level as well as improving your production process and flow.
The Feed Expander is capable of greater throughput with lower energy cost, giving the advantages a feed pro-ducer is looking for.
The interest for opti-misation of the pelleting process by improving the pre-treatment of the compound and by fully computerized systems started back in the 1980s.
Government regu-lation in terms of spe-cific thermal processing requirements for elimina-tion of risk for salmonella and related bac-teria, and the increased demand for a higher durability of feed generated a need for HTST conditioning.
The Feed Expander is a result of the increasing need for High Temperature Short Time conditioning and is able to produce feed in an economically way meeting the increasing demand from the feed customers for durable feed as well as government regulations.
The expander processThe expander process is referred to as
a high temperature and short time process (HTST). A process primarily used for pre-treatment and conditioning of animal feed.
A traditional cascade mixer is used to raise the feed temperature to 80-90°C by means of steam. The feed is then further
conditioned in the Feed Expander by a kneading process under high pressure result-ing in an increase in the temperature of the feed.
The following are some of the advantages which can be achieved:• Better physical pellet quality, fewer fines • Elimination of bacteria, mould etc • Better activation of natural binders
inherent in raw materials
• Possibility of adding larger amounts of liquid additives, that is, fat or molasses - pellet coating may become unnecessary
• Improved digestibility of the feed • Reduction of growth inhabitants
The high temperature - up to 150°C - in the Feed Expander is obtained by the heat from friction (electrical energy transferred into thermal energy) and by steam injection directly into the screw.
With such high temperatures starch cooking is improved resulting in increased
HTST and the Feed Expander by anne Mette lorenzen, andritz Feed & Biofuels a/S, Denmark
Temperature °C
Temperature °C
Temperature
Pressure
Steam
120 °C
100 °C
85 °C
20 - 80 bar
Loss-in-weight system
Feeder screw
Conditioner
By-pass
By-pass
Feed Expander
Wing crumbler
Pellet mill
Pellets outlet
Grain&feed millinG technoloGy18 | march - april 2011
FEATURE
GFMT11.02.indd 18 30/03/2011 15:53
Grain&feed millinG technoloGy march - april 2011 | 19
MADE IN HOLLAND
AL30O
Almex b.v., Verlengde Ooyerhoekseweg 29, 7207 BJ Zutphen, The Netherlands, tel. +31 (0)575 572666, e-mail [email protected], www.almex.nl
High capacity extruders and expanders.
AD System
MADE IN HOLLAND
Since 1883
HIGH PERFORMANCES LOW COST MAINTENANCE MAXIMUM SAFETY LONG LIFETIME WWW.CPMEUROPE.NL
CONTACT CPM/Europe BV Distelweg 89, 1031 HD Amsterdam,The Netherlands Phone +31 20 494 61 11, Fax +31 20 636 42 94, [email protected]
• Long term conditioners,
Hygieniser
• Remote roll
adjustment, Lineator
• Roll speed
measurement
• Hot start mixer
• Quick die change
The best value package with the lowest cost per tonne
CPM is again setting the standard for the future with the recently developed 7936-12 pellet mill equipped with 355 kW drive motor
Quick diechangeclamp
355 kw
Roll speed
Measurement
More than 125 years world 's leader in produc tivity
GFMT11.02.indd 19 30/03/2011 15:53
Expander. In the Feed Expander screw the material is further kneaded, compressed and heat-treated in a continuously control-led HTST (high temperature, short time) process.
By a process of pressure, kneading and friction the feed temperature is increased to for example 105°C in the Feed Expander. This temperature can even be increased to 130°C by addition of steam directly into the barrel of the expander.
The process is another alternative to double (2-stage) pelleting. Recipes can con-tain higher fat contents and in some cases downstream fat coating of pellets can be eliminated.
Rule of thumb regarding the effect of the feed expander: One tonne of mixed feed increases the temperature by 2°C at a power consumption of 1kWh.
The process pressure and the motor load are controlled by means of hydraulical adjust-ment of the screw’s variable nozzle (see Figure 1) closed, (see Figure 2) open. This con-struction ensures maximum mechanical stability and easy/quick access to the nozzle and the screw. The pressure and the temperature in the nozzle as well as the degree of open-ing are continuously registered and monitored in the process control.
Heating of the product in the Feed Expander screw is obtained by heat of fric-tion (electrical energy), and by steam injection directly into the screw. The process pressure, temperature, and distribution of steam and friction energy are chosen depending on
which product improve-ment is required.
The product is dis-charged from the expander directly to the pellet mill die or to the cooler if pelleting is not required.
The Feed Expander offers several benefits such as animal performance improvements, lower feed moisture, more flexible feed formulation, improved feed hygiene, increased pellet mill throughput, manipulation of feed bulk density and particle size, ability to crumble without pelleting and longer pellet die life.
The Feed Expander is a great alternative to the traditional conditioning technology.
a larger capacity of the pellet mill and fewer blockages and longer lifetime on pelletmill wear parts due to smoother flow with expanded compound. Higher feed temperatures giving an extra safe-guard against Salmonella and a noticeable improvement in physical pellet quality are just some of the advantages obtained from the process.
Functional principle The Feed Expander can be compared
with a simple extruder screw where the die plate has been exchanged with a hydraulically operated nozzle. By regu-lating the nozzle gap, the temperature
and pressure to which the feed is subjected in the screw section can be controlled.
The feed mixture is preheated in a cas-cade mixer to 80°C as used in traditional pelletizing and thereafter fed to the Feed
gelatinisation making it possible for the par-ticles/mixture to absorb more liquid (steam, fat/oil, molasses) and to improve the binding properties. This makes it possible to com-pose feed formulas without considering the binding properties of the raw material thus the natural binders in the raw material are activated on a higher level.
At the outlet of the expander the mixture expands once in atmospherical conditions due to the high pressure (10-80 bars) in the Feed Expander, causing evaporation of moisture to a level just enough for an optimal pelleting process and at the same time resulting in feed pellets with a lower moisture content meeting the demand for pellets with longer durability.
Benefits are not only met in the physical improvement, elimination of bacteria and improved digestibility of compound feed, but also process-wise.
Expansion of compound also results in fewer fines, meaning less recirculation,
FRAME:Via Bertella, 2 - 40064Ozzano Emilia (BO) Italy
Tel.: 0039 051 798107Fax: 0039 051 796300
From individual silos to complete storage & handlingfacilities, FRAME one of Europe’s largest manufacturers of storage silos,provide total solutions for your storage requirements, with flat bottom silos up to 18,000 m³ &
hopper bottom silos up to 4,300 m³ capacity & a full range of accessories to suit. Check our web site & contact us now to see how we can offer the complete package of design, manufacture & erection of your storage facility.
Total Solutions for Grain Storage
Grain&feed millinG technoloGy20 | march - april 2011
Figure 1 Figure 2
FEATURE
GFMT11.02.indd 20 30/03/2011 15:53
Grain&feed millinG technoloGy march - april 2011 | 21
Process technology, machinery, and complete plants for the animal feed industry
ANDRITZ FEED & BIOFUELEurope, Asia, and South America: [email protected] and Canada: [email protected] www.andritz.com
Lifland, Iceland. A complete process ing line for animal feed pro-duction. With this greenfield plant (capacity 50,000 t/a), Lifland will cover nearly 60% of total animal feed production in Iceland. The turnkey feed plant star ted pro-ducing in October 2010.
Together, we make it work!
■ New process lines and plants ■ Process equipment upgrades and replacements ■ Spare and wear parts ■ Service and maintenance programs ■ Optimization and support■ Leading technologies ■ Global presence ■ Local service
Save money and improve quality
www.perten.com
DA 7300 On-Line
VICTAM 2011
Booth C043
The road to profitabilityhas never been clearerOur well proven bench top DA 7200 and the DA 7300 On-Line NIR analyzers improve quality and profitability of your feed.
• Save on ingredients & reduce waste • Optimize moisture content • Improve feed quality and consistency
Learn more about our NIR feed analysis systems, visit www.perten.com
BPRV (Barrel Pressure Release Valve)(PATENT REGISTERED MACHINE)
Features• No watse factory space by installing on 2nd barrel from fi nal.• Convenient and easy control of DENSITY OF FEED by valve control.• Maintenance Free from Machine (Very Lower cost)• Saving power energy by circulation heat energy to Conditioner from
barrel and down main motor torque 10~20%.• BPRV can be installing on Existing Extruder.
Usage: For improvement to make sinkable feed (adjust slow/fast sinking) and help consistent feed production very easily!Also, enhance digesting of fi sh feed by enough cooking and show fast growing rate of fi sh.
YONG BOK CHO / PRESIDENT
Tel: +82 104112 8833 +82 53 3512323
Email: [email protected]
We can supply also these items:Twin/single extruder, barrel, sleeve & screw, die plate, etc
MARU_90x132.indd 1 24/03/2011 11:02
GFMT11.02.indd 21 30/03/2011 15:53
Only from Tapco, the two most popularbucket designs in the world!
For North American style elevators: theclassic CC-HD design. For European styleelevators: the Super EuroBucket.
Do you need more capacity? Consider theTapco 8" and 9" CC-HD Super Capacitybuckets. Our 9" projection cups provide
25% more capacity than the 8" buckets at avery cost effective price.
Wear and tear is a fact of life in many elevators. Tapco urethane buckets are knownfor their exceptional wear characteristics.Our nylon buckets are extremely strong,yet lightweight. If you are not using Tapcobuckets, you are not getting the most out ofyour elevator!
Tapco elevator bolts have been specificallydesigned to work with nonmetallic buckets.To achieve the most secure assembly, useTapco fanged elevator bolts and self-lockingnuts. Tapco stocks over 14 million bolts in six styles. If you wouldlike to improve your elevator performance, contact Tapco or visitwww.tapcoinc.com.
� Precise Discharge Consistent profile shape assures uniform dischargecharacteristics over the entire bucket range.
FLATCOUNTERSUNK
HEADElevator Bolt
� Tough & FlexibleInjection molded polyethylene “gives” or “yields” to
bypass obstructions in your elevator, allowing thebucket to return to its original shape.
� Unequaled StrengthThick walls and prime virgin engineered
resins provide exceptional strength.
� � Accurate & ReliableCapacity Ratings
Equal or greater carrying
capacity ofequivalent
size steelbuckets.
Roundedfront lip aids
in filling of bucket.
� Cost EfficientPrime virgin resins give unsurpassed bucket life
for maximum return on investment.
� Perfect FitDirect replacement of existing steel and plasticbuckets. No modifications to your elevator are needed.
� Ease of InstallationLighter weight aids in mounting buckets andreduces load on belt and running components.Nonmetallic materials eliminate hazardous sharpedges of steel buckets.
� Increased Safety Non-metallic materials eliminatethe possibility of explosion-causingsparking from bent and torn steel buckets.
� Ordered Today, Shipped Today900,000 buckets in stock worldwide in more than64 sizes, 12 styles & 6 materials for fast delivery.
How Tapco Buckets Make a World of Differencein Your Elevator Facility
The color blue, when used in connection with elevator buckets, is a U.S. registered trademark owned by Tapco Inc. Super EuroBucket ™ is a registered trademark of Tapco Inc. © 2010 Tapco Inc.® All rights reserved.
FANGED HEADElevator Bolt
STYLE SUPER EUROBUCKET™ and STYLE CC-HD Polyethylene Elevator Buckets (pictured)
Tel.: +1 314 739 9191 • +1 800 AT-TAPCO (+1 800 288 2726) • Fax: +1 314 739 5880 • www.tapcoinc.com
ELEVATOR BUCKETS - ELEVATOR BOLTS
St. Louis, Missouri U.S.A.
� Profitable, High-Speed HandlingTested and provendesigns allow adirect, compact discharge path forimproved, high-speedperformance.
®
WorldOfDiffSEB_HD_Oct2010 10/25/10 11:40 AM Page 1
GFMT11.02.indd 3 30/03/2011 15:53
Innovations for a better world.
A hammer blow to your operating costs. The hammer mill Granulex™ is the new
dynamic grinding machine from Buhler. Designed for ultimate power, Granulex™
delivers high capacity grinding up to 75 t/h. Swiss-made reliability and supreme
ease of maintenance minimize downtime, so you can make maximum use of
this productivity. It’s an investment in quality that is sure to show a rapid return –
and deliver a hammer blow to your operating costs. For more information, visit
www.buhlergroup.com.
GranulexTM
High capacity hammer mill.
Powerful 400 kW motor for high
capacity grinding.
Largest screen area of any 400 kW
hammer mill reduces wear of
screens and hammers.
Screens and hammers designed for
replacement by a single person in
less than 30 minutes.
Smooth running sliding doors on
both sides for fast and easy
maintenance.
Closed machine housing
preventing dust settlements and
easy to clean, plain surfaces.
Visit us at Victam in Cologne, Germany, hall 6, booth D041/E041
DFZP_210x297_Granulex.indd 1 03.02.2011 07:41:43GFMT11.02.indd 62 30/03/2011 15:56
NEXT PAGEPREVIOUS PAGE
GFMT11.02.indd 61 30/03/2011 15:56
When you think Sorting, think Satake.
GFMT11.02.indd 2 30/03/2011 15:53
PREVIOUS PAGEwww.gfmt.co.uk
LINKS• Seethefullissue• VisittheGFMTwebsite
• ContacttheGFMTTeam
• SubscribetoGFMT
ThisdigitalRe-printispartoftheMarch|April2011editionofGrain&FeedMillingTechnologymagazine.Contentfromthemagazineisavailabletoviewfree-of-charge,bothasafullonlinemagazineonourwebsite,andasanarchiveofindividualfeaturesonthedocstocwebsite.Pleaseclickheretoviewourotherpublicationsonwww.docstoc.com.
Topurchaseapapercopyofthemagazine,ortosubscribetothepapereditionpleasecontactourCirculationandSubscriptionsManageronthelinkadove.
INFORMATIONFORADVERTISERS-CLICKHERE
Article reprintsAll Grain & Feed Milling Tecchnology feature articles can be re-printed as a 4 or 8 page booklets (these have been used as point of sale materials, promotional materials for shows and exhibitions etc).
If you are interested in getting this article re-printed please contact the GFMT team for more information on - Tel: +44 1242 267707 - Email: [email protected] or visit www.gfmt.co.uk/reprints