how to use this install guide - custom sounds€¦ · notice: automotive data solutions inc. (ads)...

92
NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners. WARNING Pressing the printer icon or “quick printing” this document will print all of the guides in this compilation. Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle. Print only the pages for your vehicle using the advanced options in the Print menu. Install your Maestro RR according to the guide for your vehicle. HOW TO USE THIS INSTALL GUIDE 1 2 3 SELECT VEHICLE PRINT PAGES NEEDED

Upload: others

Post on 14-Jul-2020

10 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.

WARNINGPressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE1

2

3

SELECT VEHICLE PRINT PAGES NEEDED

Page 2: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN CC

2009-2014retains steering wheel controls, factory amplifier and analog outputs

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 3: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen cc 2009-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Page 4: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen cc 2009-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

• Plug the Radio Control cable to the aftermarket radio.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

• Do not use the BROWN /RED wire, the BROWN /YELLOW wire and the GREEN/WHITE wire of the VW1 T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPUnplug the factory Bluetooth module to use the factory steering wheel Bluetooth buttons with the aftermarket radio. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module.

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 5: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen cc 2009-2014

Automotive Data Solutions Inc. © 2014 4

C

A

G

FC

A FG

1

E

E

GREEN/WHITE (NOT CONNECTED)BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN - MUTE (-)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

PURPLE - RR SPEAKER (+)

VW1 T-HARNESS

FACTORY RADIOHARNESS

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

STEP 4

MAESTRO RR MODULE

CONNECT TOAFTERMARKET RADIO

RADIO CONTROL CABLE

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

WHITEWHITE

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

Page 6: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN EOS

2012-2014retains steering wheel controls, factory amplifier and analog outputs

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 7: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen eos 2012-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Page 8: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen eos 2012-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

• Plug the Radio Control cable to the aftermarket radio.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

• Do not use the BROWN /RED wire, the BROWN /YELLOW wire and the GREEN/WHITE wire of the VW1 T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPUnplug the factory Bluetooth module to use the factory steering wheel Bluetooth buttons with the aftermarket radio. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module.

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 9: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen eos 2012-2014

Automotive Data Solutions Inc. © 2014 4

C

A

G

FC

A FG

1

E

E

GREEN/WHITE (NOT CONNECTED)BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN - MUTE (-)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

PURPLE - RR SPEAKER (+)

VW1 T-HARNESS

FACTORY RADIOHARNESS

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

STEP 4

MAESTRO RR MODULE

CONNECT TOAFTERMARKET RADIO

RADIO CONTROL CABLE

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

WHITEWHITE

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

Page 10: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN GTI

2010-2014retains steering wheel controls, factory amplifier and analog outputs

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 11: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen gti 2010-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Page 12: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen gti 2010-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

• Plug the Radio Control cable to the aftermarket radio.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

• Do not use the BROWN /RED wire, the BROWN /YELLOW wire and the GREEN/WHITE wire of the VW1 T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPUnplug the factory Bluetooth module to use the factory steering wheel Bluetooth buttons with the aftermarket radio. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module.

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 13: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen gti 2010-2014

Automotive Data Solutions Inc. © 2014 4

C

A

G

FC

A FG

1

E

E

GREEN/WHITE (NOT CONNECTED)BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN - MUTE (-)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

PURPLE - RR SPEAKER (+)

VW1 T-HARNESS

FACTORY RADIOHARNESS

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

STEP 4

MAESTRO RR MODULE

CONNECT TOAFTERMARKET RADIO

RADIO CONTROL CABLE

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

WHITEWHITE

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

Page 14: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN GOLF

2010-2014retains steering wheel controls, factory amplifier and analog outputs

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 15: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen golf 2010-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Page 16: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen golf 2010-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

• Plug the Radio Control cable to the aftermarket radio.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

• Do not use the BROWN /RED wire, the BROWN /YELLOW wire and the GREEN/WHITE wire of the VW1 T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPUnplug the factory Bluetooth module to use the factory steering wheel Bluetooth buttons with the aftermarket radio. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module.

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 17: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen golf 2010-2014

Automotive Data Solutions Inc. © 2014 4

C

A

G

FC

A FG

1

E

E

GREEN/WHITE (NOT CONNECTED)BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN - MUTE (-)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

PURPLE - RR SPEAKER (+)

VW1 T-HARNESS

FACTORY RADIOHARNESS

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

STEP 4

MAESTRO RR MODULE

CONNECT TOAFTERMARKET RADIO

RADIO CONTROL CABLE

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

WHITEWHITE

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

Page 18: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN GOLF R

2012-2013retains steering wheel controls, factory amplifier and analog outputs

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 19: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen golf r 2012-2013

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Page 20: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen golf r 2012-2013

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

• Plug the Radio Control cable to the aftermarket radio.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

• Do not use the BROWN /RED wire, the BROWN /YELLOW wire and the GREEN/WHITE wire of the VW1 T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPUnplug the factory Bluetooth module to use the factory steering wheel Bluetooth buttons with the aftermarket radio. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module.

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 21: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen golf r 2012-2013

Automotive Data Solutions Inc. © 2014 4

C

A

G

FC

A FG

1

E

E

GREEN/WHITE (NOT CONNECTED)BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN - MUTE (-)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

PURPLE - RR SPEAKER (+)

VW1 T-HARNESS

FACTORY RADIOHARNESS

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

STEP 4

MAESTRO RR MODULE

CONNECT TOAFTERMARKET RADIO

RADIO CONTROL CABLE

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

WHITEWHITE

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

Page 22: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN JETTA

2011-2014retains steering wheel controls, factory amplifier and analog outputs

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 23: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen Jetta 2011-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Page 24: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen Jetta 2011-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

• Plug the Radio Control cable to the aftermarket radio.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

• Do not use the BROWN /RED wire, the BROWN /YELLOW wire and the GREEN/WHITE wire of the VW1 T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPUnplug the factory Bluetooth module to use the factory steering wheel Bluetooth buttons with the aftermarket radio. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module.

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 25: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen Jetta 2011-2014

Automotive Data Solutions Inc. © 2014 4

C

A

G

FC

A FG

1

E

E

GREEN/WHITE (NOT CONNECTED)BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN - MUTE (-)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

PURPLE - RR SPEAKER (+)

VW1 T-HARNESS

FACTORY RADIOHARNESS

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

STEP 4

MAESTRO RR MODULE

CONNECT TOAFTERMARKET RADIO

RADIO CONTROL CABLE

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

WHITEWHITE

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

Page 26: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN PASSAT

2010-2014retains steering wheel controls, factory amplifier and analog outputs

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 27: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen passat 2010-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Page 28: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen passat 2010-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

• Plug the Radio Control cable to the aftermarket radio.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

• Do not use the BROWN /RED wire, the BROWN /YELLOW wire and the GREEN/WHITE wire of the VW1 T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPUnplug the factory Bluetooth module to use the factory steering wheel Bluetooth buttons with the aftermarket radio. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module.

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 29: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen passat 2010-2014

Automotive Data Solutions Inc. © 2014 4

C

A

G

FC

A FG

1

E

E

GREEN/WHITE (NOT CONNECTED)BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN - MUTE (-)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

PURPLE - RR SPEAKER (+)

VW1 T-HARNESS

FACTORY RADIOHARNESS

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

STEP 4

MAESTRO RR MODULE

CONNECT TOAFTERMARKET RADIO

RADIO CONTROL CABLE

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

WHITEWHITE

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

Page 30: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-AS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN TIGUAN

2010-2014retains steering wheel controls, factory amplifier and analog outputs

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 31: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen tiguan 2010-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Page 32: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen tiguan 2010-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

• Plug the Radio Control cable to the aftermarket radio.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

• Do not use the BROWN /RED wire, the BROWN /YELLOW wire and the GREEN/WHITE wire of the VW1 T-harness.

STEP 3• Plug the aftermarket radio harnesses into the aftermarket

radio.

STEP 4• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPUnplug the factory Bluetooth module to use the factory steering wheel Bluetooth buttons with the aftermarket radio. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module.

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 33: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-AS maestro.idatalink.com

Volkswagen tiguan 2010-2014

Automotive Data Solutions Inc. © 2014 4

C

A

G

FC

A FG

1

E

E

GREEN/WHITE (NOT CONNECTED)BROWN/RED (NOT CONNECTED)BROWN/YELLOW (NOT CONNECTED)

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN - MUTE (-)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

PURPLE - RR SPEAKER (+)

VW1 T-HARNESS

FACTORY RADIOHARNESS

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

STEP 4

MAESTRO RR MODULE

CONNECT TOAFTERMARKET RADIO

RADIO CONTROL CABLE

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

WHITEWHITE

SEE AFTERMARKET RADIO GUIDE FORWIRE COLORS

Page 34: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certifi ed technician. Logos and trademarks used here in are the properties of their respective owners.

WARNINGPressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE1

2

3

SELECT VEHICLE PRINT PAGES NEEDED

Page 35: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-DS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN CC

2009-2014retains steering wheel controls, MFD, MDi, Vw BlUetooth anD More!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 36: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen cc 2009-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 5

Vehicle Wire Reference Chart 6

Radio Wire Reference Chart 7

Page 37: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen cc 2009-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

STEP 3• Access the OBDII connector located under the driver side

dashboard.

• Connect the BROWN /RED wire of the VW1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Connect the BROWN /YELLOW wire of the VW1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Do not use the GREEN/WHITE wire.

STEP 4• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 5• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle and the factory Bluetooth module must be unplugged. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module. Unplugging the MDI module will disable both factory systems.

2013 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.

2014 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.

2014 Alpine Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.

1

Page 38: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen cc 2009-2014

Automotive Data Solutions Inc. © 2014 4

INSTALLATION INSTRUCTIONS AIRBAG WARNING LIGHT

If an airbag warning light turns ON after starting the vehicle without having the airbag light plugged in, select Clear Airbag Warning to turn OFF that warning light.

Kenwood Radios:

Main Menu>>Setup>>Sources>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

Alpine Radios:

Settings>>General>>Idatalink Setup>> Maestro Module>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 39: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen cc 2009-2014

Automotive Data Solutions Inc. © 2014 5

10 11 12 13 14 15 16

12

34

56

78

9

C

A

H

FG

D

C

A

G

F

H D

1

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3

STEP 4

STEP 5

MAESTRO RR MODULE

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN (NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

DATACABLE

AUDIOCABLE

PURPLE - RR SPEAKER (+)

CONNECT TOAFTERMARKET RADIO

VW1 T-HARNESS

FACTORY RADIOHARNESS

BROWN/RED - CANHGREEN/WHITE (NOT CONNECTED)

BROWN/YELLOW - CANL

OBDII CONNECTOR

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

SEE CHART ONNEXT PAGE FORRADIO WIRECOLORS

WHITEWHITE

Page 40: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen cc 2009-2014

Automotive Data Solutions Inc. © 2014 6

VEHICLE WIRE REFERENCE CHART

WireDescription

Connector Name

ConnectorColor

ConnectorType Position Wire Color Polarity Wire

Location

CanH A ~ 16 pin 06 Orange/Black (DATA) OBDII connector, under driver side dash

CanL A ~ 16 pin 14 Orange/Brown (DATA) OBDII connector, under driver side dash

Warning: Factory Compass ModuleIf your vehicle is equipped with a factory compass module and you are installing an aftermarket radio that supplies navigation information to the MFD of the vehicle, disconnect the factory compass module located under the trunk Lid or in the right rear quarter panel in front and above the tail light.

Page 41: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen cc 2009-2014

Automotive Data Solutions Inc. © 2014 7

RADIO WIRE REFERENCE CHART

WireDescription Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Parking Light (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

Wired Remote (DATA) Blue/Yellow or 3.5 mm 3.5 mm Blue/Yellow 3.5 mm

Mute (-) Brown Pink/Black Brown Yellow/Black

Page 42: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-DS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN EOS

2012-2014retains steering wheel controls, MFD, MDi, Vw BlUetooth anD More!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 43: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen eos 2012-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 5

Vehicle Wire Reference Chart 6

Radio Wire Reference Chart 7

Page 44: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen eos 2012-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

STEP 3• Access the OBDII connector located under the driver side

dashboard.

• Connect the BROWN /RED wire of the VW1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Connect the BROWN /YELLOW wire of the VW1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Do not use the GREEN/WHITE wire.

STEP 4• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 5• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle and the factory Bluetooth module must be unplugged. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module. Unplugging the MDI module will disable both factory systems.

2013 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.

2014 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.

2014 Alpine Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.

1

Page 45: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen eos 2012-2014

Automotive Data Solutions Inc. © 2014 4

INSTALLATION INSTRUCTIONS AIRBAG WARNING LIGHT

If an airbag warning light turns ON after starting the vehicle without having the airbag light plugged in, select Clear Airbag Warning to turn OFF that warning light.

Kenwood Radios:

Main Menu>>Setup>>Sources>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

Alpine Radios:

Settings>>General>>Idatalink Setup>> Maestro Module>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 46: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen eos 2012-2014

Automotive Data Solutions Inc. © 2014 5

10 11 12 13 14 15 16

12

34

56

78

9

C

A

H

FG

D

C

A

G

F

H D

1

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3

STEP 4

STEP 5

MAESTRO RR MODULE

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN (NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

DATACABLE

AUDIOCABLE

PURPLE - RR SPEAKER (+)

CONNECT TOAFTERMARKET RADIO

VW1 T-HARNESS

FACTORY RADIOHARNESS

BROWN/RED - CANHGREEN/WHITE (NOT CONNECTED)

BROWN/YELLOW - CANL

OBDII CONNECTOR

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

SEE CHART ONNEXT PAGE FORRADIO WIRECOLORS

WHITEWHITE

Page 47: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen eos 2012-2014

Automotive Data Solutions Inc. © 2014 6

VEHICLE WIRE REFERENCE CHART

WireDescription

Connector Name

ConnectorColor

ConnectorType Position Wire Color Polarity Wire

Location

CanH A ~ 16 pin 06 Orange/Black (DATA) OBDII connector, under driver side dash

CanL A ~ 16 pin 14 Orange/Brown (DATA) OBDII connector, under driver side dash

Warning: Factory Compass ModuleIf your vehicle is equipped with a factory compass module and you are installing an aftermarket radio that supplies navigation information to the MFD of the vehicle, disconnect the factory compass module located under the trunk Lid.

Page 48: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen eos 2012-2014

Automotive Data Solutions Inc. © 2014 7

RADIO WIRE REFERENCE CHART

WireDescription Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Parking Light (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

Wired Remote (DATA) Blue/Yellow or 3.5 mm 3.5 mm Blue/Yellow 3.5 mm

Mute (-) Brown Pink/Black Brown Yellow/Black

Page 49: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-DS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN GTI

2010-2014retains steering wheel controls, MFD, MDi, Vw BlUetooth anD More!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 50: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen gti 2010-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 5

Vehicle Wire Reference Chart 6

Radio Wire Reference Chart 7

Page 51: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen gti 2010-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

STEP 3• Access the OBDII connector located under the driver side

dashboard.

• Connect the BROWN /RED wire of the VW1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Connect the BROWN /YELLOW wire of the VW1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Do not use the GREEN/WHITE wire.

STEP 4• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 5• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle and the factory Bluetooth module must be unplugged. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module. Unplugging the MDI module will disable both factory systems.

2013 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.

2014 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.

2014 Alpine Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.

1

Page 52: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen gti 2010-2014

Automotive Data Solutions Inc. © 2014 4

INSTALLATION INSTRUCTIONS AIRBAG WARNING LIGHT

If an airbag warning light turns ON after starting the vehicle without having the airbag light plugged in, select Clear Airbag Warning to turn OFF that warning light.

Kenwood Radios:

Main Menu>>Setup>>Sources>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

Alpine Radios:

Settings>>General>>Idatalink Setup>> Maestro Module>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 53: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen gti 2010-2014

Automotive Data Solutions Inc. © 2014 5

10 11 12 13 14 15 16

12

34

56

78

9

C

A

H

FG

D

C

A

G

F

H D

1

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3

STEP 4

STEP 5

MAESTRO RR MODULE

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN (NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

DATACABLE

AUDIOCABLE

PURPLE - RR SPEAKER (+)

CONNECT TOAFTERMARKET RADIO

VW1 T-HARNESS

FACTORY RADIOHARNESS

BROWN/RED - CANHGREEN/WHITE (NOT CONNECTED)

BROWN/YELLOW - CANL

OBDII CONNECTOR

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

SEE CHART ONNEXT PAGE FORRADIO WIRECOLORS

WHITEWHITE

Page 54: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen gti 2010-2014

Automotive Data Solutions Inc. © 2014 6

VEHICLE WIRE REFERENCE CHART

WireDescription

Connector Name

ConnectorColor

ConnectorType Position Wire Color Polarity Wire

Location

CanH A ~ 16 pin 06 Orange/Black (DATA) OBDII connector, under driver side dash

CanL A ~ 16 pin 14 Orange/Brown (DATA) OBDII connector, under driver side dash

Warning: Factory Compass ModuleIf your vehicle is equipped with a factory compass module and you are installing an aftermarket radio that supplies navigation information to the MFD of the vehicle, disconnect the factory compass module located under the headliner at the rear of the vehicle.

Page 55: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen gti 2010-2014

Automotive Data Solutions Inc. © 2014 7

RADIO WIRE REFERENCE CHART

WireDescription Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Parking Light (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

Wired Remote (DATA) Blue/Yellow or 3.5 mm 3.5 mm Blue/Yellow 3.5 mm

Mute (-) Brown Pink/Black Brown Yellow/Black

Page 56: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-DS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN GOLF

2010-2014retains steering wheel controls, MFD, MDi, Vw BlUetooth anD More!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 57: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF 2010-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 5

Vehicle Wire Reference Chart 6

Radio Wire Reference Chart 7

Page 58: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF 2010-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

STEP 3• Access the OBDII connector located under the driver side

dashboard.

• Connect the BROWN /RED wire of the VW1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Connect the BROWN /YELLOW wire of the VW1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Do not use the GREEN/WHITE wire.

STEP 4• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 5• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle and the factory Bluetooth module must be unplugged. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module. Unplugging the MDI module will disable both factory systems.

2013 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.

2014 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.

2014 Alpine Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.

1

Page 59: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF 2010-2014

Automotive Data Solutions Inc. © 2014 4

INSTALLATION INSTRUCTIONS AIRBAG WARNING LIGHT

If an airbag warning light turns ON after starting the vehicle without having the airbag light plugged in, select Clear Airbag Warning to turn OFF that warning light.

Kenwood Radios:

Main Menu>>Setup>>Sources>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

Alpine Radios:

Settings>>General>>Idatalink Setup>> Maestro Module>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 60: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF 2010-2014

Automotive Data Solutions Inc. © 2014 5

10 11 12 13 14 15 16

12

34

56

78

9

C

A

H

FG

D

C

A

G

F

H D

1

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3

STEP 4

STEP 5

MAESTRO RR MODULE

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN (NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

DATACABLE

AUDIOCABLE

PURPLE - RR SPEAKER (+)

CONNECT TOAFTERMARKET RADIO

VW1 T-HARNESS

FACTORY RADIOHARNESS

BROWN/RED - CANHGREEN/WHITE (NOT CONNECTED)

BROWN/YELLOW - CANL

OBDII CONNECTOR

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

SEE CHART ONNEXT PAGE FORRADIO WIRECOLORS

WHITEWHITE

Page 61: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF 2010-2014

Automotive Data Solutions Inc. © 2014 6

VEHICLE WIRE REFERENCE CHART

WireDescription

Connector Name

ConnectorColor

ConnectorType Position Wire Color Polarity Wire

Location

CanH A ~ 16 pin 06 Orange/Black (DATA) OBDII connector, under driver side dash

CanL A ~ 16 pin 14 Orange/Brown (DATA) OBDII connector, under driver side dash

Warning: Factory Compass ModuleIf your vehicle is equipped with a factory compass module and you are installing an aftermarket radio that supplies navigation information to the MFD of the vehicle, disconnect the factory compass module located under the headliner at the rear of the vehicle.

Page 62: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF 2010-2014

Automotive Data Solutions Inc. © 2014 7

RADIO WIRE REFERENCE CHART

WireDescription Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Parking Light (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

Wired Remote (DATA) Blue/Yellow or 3.5 mm 3.5 mm Blue/Yellow 3.5 mm

Mute (-) Brown Pink/Black Brown Yellow/Black

Page 63: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-DS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN GOLF R

2012-2013retains steering wheel controls, MFD, MDi, Vw BlUetooth anD More!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 64: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF r 2012-2013

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 5

Vehicle Wire Reference Chart 6

Radio Wire Reference Chart 7

Page 65: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF r 2012-2013

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

STEP 3• Access the OBDII connector located under the driver side

dashboard.

• Connect the BROWN /RED wire of the VW1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Connect the BROWN /YELLOW wire of the VW1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Do not use the GREEN/WHITE wire.

STEP 4• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 5• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle and the factory Bluetooth module must be unplugged. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module. Unplugging the MDI module will disable both factory systems.

2013 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.

2014 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.

2014 Alpine Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.

1

Page 66: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF r 2012-2013

Automotive Data Solutions Inc. © 2014 4

INSTALLATION INSTRUCTIONS AIRBAG WARNING LIGHT

If an airbag warning light turns ON after starting the vehicle without having the airbag light plugged in, select Clear Airbag Warning to turn OFF that warning light.

Kenwood Radios:

Main Menu>>Setup>>Sources>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

Alpine Radios:

Settings>>General>>Idatalink Setup>> Maestro Module>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 67: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF r 2012-2013

Automotive Data Solutions Inc. © 2014 5

10 11 12 13 14 15 16

12

34

56

78

9

C

A

H

FG

D

C

A

G

F

H D

1

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3

STEP 4

STEP 5

MAESTRO RR MODULE

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN (NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

DATACABLE

AUDIOCABLE

PURPLE - RR SPEAKER (+)

CONNECT TOAFTERMARKET RADIO

VW1 T-HARNESS

FACTORY RADIOHARNESS

BROWN/RED - CANHGREEN/WHITE (NOT CONNECTED)

BROWN/YELLOW - CANL

OBDII CONNECTOR

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

SEE CHART ONNEXT PAGE FORRADIO WIRECOLORS

WHITEWHITE

Page 68: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF r 2012-2013

Automotive Data Solutions Inc. © 2014 6

VEHICLE WIRE REFERENCE CHART

WireDescription

Connector Name

ConnectorColor

ConnectorType Position Wire Color Polarity Wire

Location

CanH A ~ 16 pin 06 Orange/Black (DATA) OBDII connector, under driver side dash

CanL A ~ 16 pin 14 Orange/Brown (DATA) OBDII connector, under driver side dash

Warning: Factory Compass ModuleIf your vehicle is equipped with a factory compass module and you are installing an aftermarket radio that supplies navigation information to the MFD of the vehicle, disconnect the factory compass module located under the headliner at the rear of the vehicle.

Page 69: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen golF r 2012-2013

Automotive Data Solutions Inc. © 2014 7

RADIO WIRE REFERENCE CHART

WireDescription Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Parking Light (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

Wired Remote (DATA) Blue/Yellow or 3.5 mm 3.5 mm Blue/Yellow 3.5 mm

Mute (-) Brown Pink/Black Brown Yellow/Black

Page 70: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-DS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN JETTA

2011-2014retains steering wheel controls, MFD, MDi, Vw BlUetooth anD More!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 71: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Jetta 2011-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 5

Vehicle Wire Reference Chart 6

Radio Wire Reference Chart 7

Page 72: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Jetta 2011-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

STEP 3• Access the OBDII connector located under the driver side

dashboard.

• Connect the BROWN /RED wire of the VW1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Connect the BROWN /YELLOW wire of the VW1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Do not use the GREEN/WHITE wire.

STEP 4• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 5• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle and the factory Bluetooth module must be unplugged. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module. Unplugging the MDI module will disable both factory systems.

2013 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.

2014 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.

2014 Alpine Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.

1

Page 73: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Jetta 2011-2014

Automotive Data Solutions Inc. © 2014 4

INSTALLATION INSTRUCTIONS AIRBAG WARNING LIGHT

If an airbag warning light turns ON after starting the vehicle without having the airbag light plugged in, select Clear Airbag Warning to turn OFF that warning light.

Kenwood Radios:

Main Menu>>Setup>>Sources>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

Alpine Radios:

Settings>>General>>Idatalink Setup>> Maestro Module>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 74: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Jetta 2011-2014

Automotive Data Solutions Inc. © 2014 5

10 11 12 13 14 15 16

12

34

56

78

9

C

A

H

FG

D

C

A

G

F

H D

1

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3

STEP 4

STEP 5

MAESTRO RR MODULE

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN (NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

DATACABLE

AUDIOCABLE

PURPLE - RR SPEAKER (+)

CONNECT TOAFTERMARKET RADIO

VW1 T-HARNESS

FACTORY RADIOHARNESS

BROWN/RED - CANHGREEN/WHITE (NOT CONNECTED)

BROWN/YELLOW - CANL

OBDII CONNECTOR

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

SEE CHART ONNEXT PAGE FORRADIO WIRECOLORS

WHITEWHITE

Page 75: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Jetta 2011-2014

Automotive Data Solutions Inc. © 2014 6

VEHICLE WIRE REFERENCE CHART

WireDescription

Connector Name

ConnectorColor

ConnectorType Position Wire Color Polarity Wire

Location

CanH A ~ 16 pin 06 Orange/Black (DATA) OBDII connector, under driver side dash

CanL A ~ 16 pin 14 Orange/Brown (DATA) OBDII connector, under driver side dash

Warning: Factory Compass ModuleIf your vehicle is equipped with a factory compass module and you are installing an aftermarket radio that supplies navigation information to the MFD of the vehicle, disconnect the factory compass module located under the trunk Lid.

Page 76: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Jetta 2011-2014

Automotive Data Solutions Inc. © 2014 7

RADIO WIRE REFERENCE CHART

WireDescription Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Parking Light (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

Wired Remote (DATA) Blue/Yellow or 3.5 mm 3.5 mm Blue/Yellow 3.5 mm

Mute (-) Brown Pink/Black Brown Yellow/Black

Page 77: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-DS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN PASSAT

2010-2014retains steering wheel controls, MFD, MDi, Vw BlUetooth anD More!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 78: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Passat 2010-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 5

Vehicle Wire Reference Chart 6

Radio Wire Reference Chart 7

Page 79: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Passat 2010-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

STEP 3• Access the OBDII connector located under the driver side

dashboard.

• Connect the BROWN /RED wire of the VW1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Connect the BROWN /YELLOW wire of the VW1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Do not use the GREEN/WHITE wire.

STEP 4• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 5• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle and the factory Bluetooth module must be unplugged. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module. Unplugging the MDI module will disable both factory systems.

2013 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.

2014 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.

2014 Alpine Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.

1

Page 80: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Passat 2010-2014

Automotive Data Solutions Inc. © 2014 4

INSTALLATION INSTRUCTIONS AIRBAG WARNING LIGHT

If an airbag warning light turns ON after starting the vehicle without having the airbag light plugged in, select Clear Airbag Warning to turn OFF that warning light.

Kenwood Radios:

Main Menu>>Setup>>Sources>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

Alpine Radios:

Settings>>General>>Idatalink Setup>> Maestro Module>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 81: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Passat 2010-2014

Automotive Data Solutions Inc. © 2014 5

10 11 12 13 14 15 16

12

34

56

78

9

C

A

H

FG

D

C

A

G

F

H D

1

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3

STEP 4

STEP 5

MAESTRO RR MODULE

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN (NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

DATACABLE

AUDIOCABLE

PURPLE - RR SPEAKER (+)

CONNECT TOAFTERMARKET RADIO

VW1 T-HARNESS

FACTORY RADIOHARNESS

BROWN/RED - CANHGREEN/WHITE (NOT CONNECTED)

BROWN/YELLOW - CANL

OBDII CONNECTOR

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

SEE CHART ONNEXT PAGE FORRADIO WIRECOLORS

WHITEWHITE

Page 82: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Passat 2010-2014

Automotive Data Solutions Inc. © 2014 6

VEHICLE WIRE REFERENCE CHART

WireDescription

Connector Name

ConnectorColor

ConnectorType Position Wire Color Polarity Wire

Location

CanH A ~ 16 pin 06 Orange/Black (DATA) OBDII connector, under driver side dash

CanL A ~ 16 pin 14 Orange/Brown (DATA) OBDII connector, under driver side dash

Warning: Factory Compass ModuleIf your vehicle is equipped with a factory compass module and you are installing an aftermarket radio that supplies navigation information to the MFD of the vehicle, disconnect the factory compass module located under the trunk Lid.

Page 83: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen Passat 2010-2014

Automotive Data Solutions Inc. © 2014 7

RADIO WIRE REFERENCE CHART

WireDescription Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Parking Light (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

Wired Remote (DATA) Blue/Yellow or 3.5 mm 3.5 mm Blue/Yellow 3.5 mm

Mute (-) Brown Pink/Black Brown Yellow/Black

Page 84: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

OPTIONAL ACCESSORIESNone

PROGRAMMED FIRMWAREADS-RR(SR)-VW01-DS

PRODUCTS REQUIREDiDatalink Maestro RR Radio Replacement InterfaceiDatalink Maestro VW1 Installation Harness

INSTALL GUIDEVOLkSWAGEN TIGUAN

2010-2014retains steering wheel controls, MFD, MDi, Vw BlUetooth anD More!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certified technician. Logos and trademarks used here in are the properties of their respective owners.

Page 85: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen tigUan 2010-2014

Automotive Data Solutions Inc. © 2014 2

WELCOME

NEED HELP?

Congratulations on the purchase of your iDatalink Maestro RR Radio replacement solution. You are now a few simple steps away from enjoying your new car radio with enhanced features. Before starting your installation, please ensure that your iDatalink Maestro module is programmed with the correct fi rmware for your vehicle and that you carefully review the install guide.

Please note that Maestro RR will only retain functionalities that were originally available in the vehicle.

1 866 427-2999

[email protected]

maestro.idatalink.com/supportwww.12voltdata.com/forum

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 5

Vehicle Wire Reference Chart 6

Radio Wire Reference Chart 7

Page 86: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen tigUan 2010-2014

Automotive Data Solutions Inc. © 2014 3

INSTALLATION INSTRUCTIONS STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from aftermarket radio main harness to the VW1 T-harness and match the wire functions.

STEP 2

• Connect the factory harness to the VW1 T-harness.

• Mate the male and female 4 pin WHITE connectors of the VW1 T-harness.

• Do not use any of the RCA plugs (WHITE, GRAY, GREEN & PURPLE) of the VW1 T-harness.

STEP 3• Access the OBDII connector located under the driver side

dashboard.

• Connect the BROWN /RED wire of the VW1 T-harness to the wire located at pin 6 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Connect the BROWN /YELLOW wire of the VW1 T-harness to the wire located at pin 14 of the OBDII connector. (See the vehicle wire chart reference for wire colors)

• Do not use the GREEN/WHITE wire.

STEP 4• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Plug the Data cable to the data port of the aftermarket radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio jack of the aftermarket radio.

STEP 5• Connect all the harnesses to the Maestro RR module then

proceed to module setup.

The module is now ready to be used.

Insert the aftermarket radio in the dashboard housing and test all the functionalities.

Reassemble the dashboard carefully.

OEM BLUETOOTH SETUPOnly one Bluetooth system can be set for hands free calling. This must be determined before installation. Both the factory and aftermarket systems can be used for Bluetooth audio streaming. If the aftermarket Bluetooth is chosen for hands free calling, the aftermarket microphone must be installed in the vehicle and the factory Bluetooth module must be unplugged. In most vehicles, it is located under the passenger seat. If the vehicle is equipped with Bluetooth but there is no Bluetooth module under the passenger’s seat then the Bluetooth system is built into the MDI module. Unplugging the MDI module will disable both factory systems.

2013 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned OFF by default. To turn ON the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The Radio will turn on and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select ON. Press the return arrow then scroll to the bottom of the page select FINISH.

2014 Kenwood Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the setup screen will appear. Scroll to the bottom and select the vehicle set up menu by pressing SET. Go to the option OEM Bluetooth and select OFF.

2014 Alpine Radios:

For these radio models, the OEM Bluetooth is turned ON by default. To turn OFF the OEM Bluetooth, insert the key into the ignition and turn it to the ACC position. The radio will turn ON and the main screen will appear. Select the settings button, in the top right corner, then select GENERAL. Select INTEGRATION SETUP then select HANDS FREE CONNECTION. Two options will be available ON or OFF, select OFF.

1

Page 87: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen tigUan 2010-2014

Automotive Data Solutions Inc. © 2014 4

INSTALLATION INSTRUCTIONS AIRBAG WARNING LIGHT

If an airbag warning light turns ON after starting the vehicle without having the airbag light plugged in, select Clear Airbag Warning to turn OFF that warning light.

Kenwood Radios:

Main Menu>>Setup>>Sources>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

Alpine Radios:

Settings>>General>>Idatalink Setup>> Maestro Module>>Volkswagen Setup>>Vehicle Features>>Clear Airbag Warning

TROUBLESHOOTING TIPS:

• To reset the module back to its factory settings, turn the key to the OFF position then disconnect all connectors from the module. Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will fl ash RED rapidly (this may take up to 10 seconds). Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds.

• For technical assistance call 1-866-427-2999 or e-mail “[email protected]”. Visit us at “maestro.idatalink.com/support” and “www.12voltdata.com/forum/”

1

Page 88: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen tigUan 2010-2014

Automotive Data Solutions Inc. © 2014 5

10 11 12 13 14 15 16

12

34

56

78

9

C

A

H

FG

D

C

A

G

F

H D

1

WIRING DIAGRAMSTEP 1

STEP 2

STEP 3

STEP 4

STEP 5

MAESTRO RR MODULE

WHITE - LF SPEAKER (+)WHITE/BLACK - LF SPEAKER (-)GRAY - RF SPEAKER (+)GRAY/BLACK - RF SPEAKER (-)GREEN - LR SPEAKER (+)GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUNDRED - ACCESSORY (+)

BROWN (NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

(NOT CONNECTED)

ORANGE - PARKING LIGHT (+)PURPLE/WHITE - REVERSE LIGHT (+)LTGREEN - E-BRAKE (-)

BLUE/WHITE - AMP. TURN ON (+)

MAINHARNESS

DATACABLE

AUDIOCABLE

PURPLE - RR SPEAKER (+)

CONNECT TOAFTERMARKET RADIO

VW1 T-HARNESS

FACTORY RADIOHARNESS

BROWN/RED - CANHGREEN/WHITE (NOT CONNECTED)

BROWN/YELLOW - CANL

OBDII CONNECTOR

WIRES FROMVEHICLE

YELLOW/BLACK - FOOT BRAKEPINK - VEHICLE SPEED

SEE CHART ONNEXT PAGE FORRADIO WIRECOLORS

WHITEWHITE

Page 89: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen tigUan 2010-2014

Automotive Data Solutions Inc. © 2014 6

VEHICLE WIRE REFERENCE CHART

WireDescription

Connector Name

ConnectorColor

ConnectorType Position Wire Color Polarity Wire

Location

CanH A ~ 16 pin 06 Orange/Black (DATA) OBDII connector, under driver side dash

CanL A ~ 16 pin 14 Orange/Brown (DATA) OBDII connector, under driver side dash

Warning: Factory Compass ModuleIf your vehicle is equipped with a factory compass module and you are installing an aftermarket radio that supplies navigation information to the MFD of the vehicle, disconnect the factory compass module located under the headliner at the rear of the vehicle.

Page 90: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

ADS-RR(SR)-VW01-DS maestro.idatalink.com

Volkswagen tigUan 2010-2014

Automotive Data Solutions Inc. © 2014 7

RADIO WIRE REFERENCE CHART

WireDescription Polarity Wire Color on Maestro

T-Harness Wire Color on Alpine cable Wire Color on Kenwood cable Wire Color on Pioneer cable

Parking Light (+) Orange N/A Orange/White Orange/White

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A Pink

Wired Remote (DATA) Blue/Yellow or 3.5 mm 3.5 mm Blue/Yellow 3.5 mm

Mute (-) Brown Pink/Black Brown Yellow/Black

Page 91: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and
Page 92: HOW TO USE THIS INSTALL GUIDE - Custom Sounds€¦ · NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certi ed technician. Logos and

HRN-RR-VW1

www.idatalinkmaestro.com

1111111111 1111 6 27780 00611 6

Does it work with my car7 Fondionne-t-il avec mon auto?

;.Funciona con mi coche?