how to upgrade dvr nvr new firmware - w box · pdf filestandard operation procedure! how to...
TRANSCRIPT
STANDARD OPERATION PROCEDURE
How to Upgrade DVR / NVR New Firmware
T E C H N O L O G I E S
BOX
0E-4500GMD 0E-81TMD 0E-161TMD 0E-41T1UD 0E-82T1UD 0E-162T1UD 0E-41TP1UN 0E-82TP1UN 0E-162TP15UN
FOR TECHNICAL SUPPORT: 1-888-668-8808
STANDARD OPERATION PROCEDURE
You can upgrade the firmware by either of the following two methods. 1. Upgrade via Web Browser 2. Upgrade via USB Flash Disk
Note : The SimpleDDNS function should be available for W Box VMS mobile app in Nov. 2015. Before that, the devices can be visit through SimpleDDNS by web browser. Please choose other DDNS services for the W Box VMS mobile app if necessary.
Upgrade via Web Browser Before Upgrading: The following device and accessories are required to finish firmware upgrading: 1. DVR / NVR device; 2. CAT5 network cable; 3. PC/ laptop; 4. New firmware package (digicap.dav file);
Step1: Download the new FW to the computer from the website. Unzip and you will have a digicap.dav file.
Step2: Connect the computer to the DVR/NVR with CAT5 network cable directly. NOTE: The cable should be connected to the LAN interface of the DVR/NVR rear panel.
STANDARD OPERATION PROCEDURE
Step3: Change your computer’s IP to 192.0.0.128, the same network segment with the DVR/NVR (our devices’ default IP is 192.0.0.64).
NOTE: If the device IP address has been changed, the computer’s IP should be changed to the same segment with the device.
STANDARD OPERATION PROCEDURE
Step4: Open web browser, input the IP address of the device and then press Enter. The login interface appears.
Input the user name and password, and click the Login. NOTE: The default IP address is 192.0.0.64.
The default user name is admin, and password is wbox123. Install the WebComponents.exe if it requires.
NOTE: The bowser needs to be closed when installing the plug-‐in. Step5: Navigate to Configuration-‐Maintenance. In Remote Upgrade, click Browse and choose the new firmware file (digicap.dav).
STANDARD OPERATION PROCEDURE
Click Upgrade. Wait several minutes. The device will reboots automatically after upgrading.
Step6: Login the device via web browser. Click Default to restore all parameters to default settings.
STANDARD OPERATION PROCEDURE
Upgrade via USB Flash Disk Before Upgrading: The following device and accessories are required to finish firmware upgrading: 1. DVR / NVR device; 2. VGA / HDMI monitor; 3. PC/ laptop; 4. USB flash disk (with 30MB or above memory available); 5. New firmware package (digicap.dav file);
Step1: Download the new FW to the computer from the website. Unzip and you will have a digicap.dav file. Copy the digicap.dav to the USB Flash disk.
STANDARD OPERATION PROCEDURE
Step2: Insert the USB disk into the USB port of the DVR / NVR. NOTE: You can either use the front panel USB port or rear panel USB port.
Front panel of DVR / NVR
Rear panel of DVR / NVR
Step3: Connect the monitor to the DVR/NVR. Turn on the DVR /NVR. Navigate the local menu to Menu-‐Maintenance-‐Upgrade
Select the update file from the flash disk.
STANDARD OPERATION PROCEDURE
Click the Upgrade button to start upgrading. After the upgrading is complete, reboot the NVR to activate the new firmware.
Step4: Navigate the local menu to Menu-‐Maintenance-‐ Default Click the OK button to restore the default settings.
Note : The SimpleDDNS function should be available for W Box VMS mobile app in Nov. 2015. Before that, the devices can be visited through SimpleDDNS by web browser. Please choose other DDNS services for the W Box VMS mobile app if necessary.
FOR TECHNICAL SUPPORT: 1-888-668-8808