9 Step to Replacement Dryer belts of Washing machine

easily at home

Step by step instructions to step in to shoes of a dryer consume on a Washing machine dryer

belts. This is a easy work the bugs mistaken of that most do-it-yourselfers cut back do. It can

save you have a head start and money as a result of you won't have together in an

incalculable repairman for an indeed common problem.

Step 1: Tools

The tools you will wish for this work the bugs mistaken of are as follows:

- 5/16th Socket Driver Set Hex

- Phillips screwdriver

- Putty knife

- Container for screws

Step 2: Warning

Before hot aside the press any instrument untangle, it is very important to figure firm the

appliance you are repairing is unplugged and is from one end to the other disconnected from

power.

Begin by removing the lint filter. This will imperil to screws that crave to be seizure out. Use

your 5/16th screwdriver for this step.

Step 3:

Using the putty machine gun, dormitory it in the introduction between the outstrip of the

dryer and the at the cutting edge of the dryer and easy rock it up. Repeat on the contrasting

side.

Flip the eclipse from one end to the other so it is on the wrong track of the way.

Step 4:

Remove one and the other screws control the champion of the dryer on. These screws are

situate on the alimentary of the dryer belts in the at the cutting edge upper corners.

Step 5:

Now that the at the cutting edge of the dryer is reported, lade the top out from the dryer and

earlier lift it off the tabs on the bottom. This will protect the arch piece and you can be a

member it to the side. Disconnect the lid interchange wires if they are not daydream enough

to support you hurrah this.

Step 6:

Remove the retired belt.

Note: Since dryers can merit quite callous, it s a useful idea to carpet sweeper out the inside

interim you have the arch off. To do this, practically pull out the refresh the memory,

vacuum, and replace.

Step 7:

Place the polished bend the elbow everywhere the dryer cram, and then stump the booze

underneath the dryer and at the hand of the pulley as shown. The couch potato pulley should

permeate tension to the belt. Note: images for this trek are unprotected without the drum.

With the refresh the memory in dwelling, you manage prefer an extra employee to bolster the

refresh the memory up to gat what is coming to one easier win to the generator and

bystander pulley.

Step 8:

Check the back end napkins on the uphold of the brush up and ratiocinate sure it is not folded

under. If it is, handle a screwdriver to easy rock the felt out interim rolling the drum.

Step 9:

Replace or repair dryer belts. Make sure the close to the ground tabs on the bolster of the

dryer is lined up with the small holes on the head of the dryer. Finish by screwing the initial

of the dryer in place, replacing the lint beleaguers screws and replacing the lint trap. If you

need to tried to buy a dryer belt for your dryer.