how to prepare (c) 2006, mark rosengarten do not cram. get your studying done with by the night...

How To Prepare

(c) 2006, Mark Rosengarten

DO NOT CRAM. Get your studying done with by the night before. Get a good night’s sleep and have breakfast the morning of the exam.

Use a review book with old exams, answers and explanations in it. Take the old tests and grade yourself. The questions you don’t understand why you got wrong make sure to see your teacher about.

Actively participate in any and all review classes and activities offered by your teacher.

Study vocabulary. Identify key words and use flash cards to help you remember what the meaning of those words are and the concepts behind them.

Outline for Review


1) The Atom (Nuclear, Electron Config)2) Matter (Phases, Types, Changes)3) Bonding (Periodic Table, Ionic, Covalent)4) Compounds (Formulas, Reactions, IMAF’s)

5) Math of Chemistry (Formula Mass, Gas Laws, Neutralization, etc.)

6) Kinetics and Thermodynamics (PE Diagrams, etc.)7) Acids and Bases (pH, formulas, indicators, etc.)8) Oxidation and Reduction (Half Reactions, Cells,

etc.)9) Organic Chemistry (Hydrocarbons, Families,

Reactions)

The Atom


1) Nucleons – click here for website on nucleons2) Isotopes – click here for website on isotopes3) Natural Radioactivity 4) Half-Life5) Nuclear Power6) Electron Configuration7) Development of the Atomic Model

Nucleons


Protons: +1 each, determines identity of element, mass of 1 amu, determined using atomic number, nuclear charge

Neutrons: no charge, determines identity of isotope of an element, 1 amu, determined using mass number - atomic number (amu = atomic mass unit)

3216S and 33

16S are both isotopes of S S-32 has 16 protons and 16 neutrons S-33 has 16 protons and 17 neutrons All atoms of S have a nuclear charge of +16 due

to the 16 protons.website

Isotopes


Atoms of the same element MUST contain the same number of protons.

Atoms of the same element can vary in their numbers of neutrons, therefore many different atomic masses can exist for any one element. These are called isotopes.

The atomic mass on the Periodic Table is the weight-average atomic mass, taking into account the different isotope masses and their relative abundance.

Rounding off the atomic mass on the Periodic Table will tell you what the most common isotope of that element is.

Weight-Average Atomic Mass


WAM = ((% A of A/100) X Mass of A) + ((% A of B/100) X Mass of B) + …

What is the WAM of an element if its isotope masses and abundances are: X-200: Mass = 200.0 amu, % abundance = 20.0

% X-204: Mass = 204.0 amu, % abundance =

80.0%

amu = atomic mass unit (1.66 × 10-27 kilograms/amu)

website

Most Common Isotope


The weight-average atomic mass of Zinc is 65.39 amu. What is the most common isotope of Zinc? Zn-65!

What are the most common isotopes of: Co Ag S Pb

FACT: one atomic mass unit (1.66 × 10-27 kilograms) is defined as 1/12 of the mass of an atom of C-12.

This method doesn’t always work, but it usually does. Use it for the Regents exam.

Natural Radioactivity


Alpha Decay Beta Decay Positron Decay Gamma Decay Charges of Decay Particles

Natural decay starts with a parent nuclide that ejects a decay particle to form a daughter nuclide which is more stable than the parent nuclide was.

website

Alpha Decay


The nucleus ejects two protons and two neutrons. The atomic mass decreases by 4, the atomic number decreases by 2.

23892U

Beta Decay


A neutron decays into a proton and an electron. The electron is ejected from the nucleus as a beta particle. The atomic mass remains the same, but the atomic number increases by 1.

146C

Positron Decay


A proton is converted into a neutron and a positron. The positron is ejected by the nucleus. The mass remains the same, but the atomic number decreases by 1.

5326Fe

Gamma Decay


The nucleus has energy levels just like electrons, but the involve a lot more energy. When the nucleus becomes more stable, a gamma ray may be released. This is a photon of high-energy light, and has no mass or charge. The atomic mass and number do not change with gamma. Gamma may occur by itself, or in conjunction with any other decay type.

Charges of Decay Particles


Half-Life


Half life is the time it takes for half of the nuclei in a radioactive sample to undergo decay.

Problem Types: Going forwards in time Going backwards in time Radioactive Dating

website

Going Forwards in Time


How many grams of a 10.0 gram sample of I-131 (half-life of 8 days) will remain in 24 days?

#HL = t/T = 24/8 = 3 Cut 10.0g in half 3 times: 5.00, 2.50, 1.25g

Going Backwards in Time


How many grams of a 10.0 gram sample of I-131 (half-life of 8 days) would there have been 24 days ago?

#HL = t/T = 24/8 = 3 Double 10.0g 3 times: 20.0, 40.0, 80.0 g

Radioactive Dating


A sample of an ancient scroll contains 50% of the original steady-state concentration of C-14. How old is the scroll?

50% = 1 HL 1 HL X 5730 y/HL = 5730y

Nuclear Power


Artificial Transmutation Particle Accelerators Nuclear Fission Nuclear Fusion

Artificial Transmutation


4020Ca + _____ -----> 40

19K + 11H

9642Mo + 2

1H -----> 10n + _____

Nuclide + Bullet --> New Element + Fragment(s) The masses and atomic numbers must add

up to be the same on both sides of the arrow.

Website

Particle Accelerators


Devices that use electromagnetic fields to accelerate particle “bullets” towards target nuclei to make artificial transmutation possible!

Most of the elements from 93 on up (the “transuranium” elements) were created using particle accelerators.

Particles with no charge cannot be accelerated by the charged fields.

website

Nuclear Fission


23592U + 1

0n 9236Kr + 141

56Ba + 3 10n + energy

The three neutrons given off can be reabsorbed by other U-235 nuclei to continue fission as a chain reaction

A tiny bit of mass is lost (mass defect) and converted into a huge amount of energy.

website

Chain Reaction


Nuclear Fusion


21H + 2

1H 42He + energy

Two small, positively-charged nuclei smash together at high temperatures and pressures to form one larger nucleus.

A small bit of mass is destroyed and converted into a huge amount of energy, more than even fission.

website

Electron Configuration


Basic Configuration Valence Electrons Electron-Dot (Lewis Dot) Diagrams Excited vs. Ground State What is Light?

Basic Configuration


The number of electrons is determined from the atomic number.

Look up the basic configuration below the atomic number on the periodic table. (PEL: principal energy level = shell)

He: 2 (2 e- in the 1st PEL) Na: 2-8-1 (2 e- in the 1st PEL, 8 in the 2nd and 1

in the 3rd) Br: 2-8-18-7 (2 e- in the 1st PEL, 8 in the 2nd, 18

in the 3rd and 7 in the 4th)

Valence Electrons


The valence electrons are responsible for all chemical bonding.

The valence electrons are the electrons in the outermost PEL (shell).

He: 2 (2 valence electrons) Na: 2-8-1 (1 valence electron) Br: 2-8-18-7 (7 valence electrons)

The maximum number of valence electrons an atom can have is EIGHT, called a STABLE OCTET.

Electron-Dot Diagrams


The number of dots equals the number of valence electrons.

The number of unpaired valence electrons in a nonmetal tells you how many covalent bonds that atom can form with other nonmetals or how many electrons it wants to gain from metals to form an ion.

The number of valence electrons in a metal tells you how many electrons the metal will lose to nonmetals to form an ion. Caution: May not work with transition metals.

EXAMPLE DOT DIAGRAMSClick here for website on

valence electrons and electron dot diagrams

Example Dot Diagrams


Carbon can also have this dot diagram, which ithas when it forms organic compounds.

Excited vs. Ground State


Configurations on the Periodic Table are ground state configurations.

If electrons are given energy, they rise to higher energy levels (excited state).

If the total number of electrons matches in the configuration, but the configuration doesn’t match, the atom is in the excited state.

Na (ground, on table): 2-8-1 Example of excited states: 2-7-2, 2-8-0-1, 2-6-3

website

What Is Light?


Light is formed when electrons drop from the excited state to the ground state.

The lines on a bright-line spectrum come from specific energy level drops and are unique to each element.

EXAMPLE SPECTRUM

EXAMPLE SPECTRUM


This is the bright-line spectrum of hydrogen. The topnumbers represent the PEL (shell) change that produces the light with that color and the bottom number is thewavelength of the light (in nanometers, or 10-9 m).

No other element has the same bright-line spectrum ashydrogen, so these spectra can be used to identifyelements or mixtures of elements.

website

Development of the Atomic Model


Thompson Model Rutherford Gold Foil Experiment and Model Bohr Model Quantum-Mechanical Model

Thompson Model


The atom is a positively charged diffuse mass with negatively charged electrons stuck in it.

website

Rutherford Model


The atom is made of a small, dense, positively charged nucleus with electrons at a distance, the vast majority of the volume of the atom is empty space.

Alpha particles shotat a thin sheet of goldfoil: most go through(empty space). Somedeflect or bounce off(small + chargednucleus).

website

Bohr Model


Electrons orbit around the nucleus in energy levels (shells). Atomic bright-line spectra was the clue. Animation

Quantum-Mechanical Model


Electron energy levels are wave functions. Electrons are found in orbitals, regions of space

where an electron is most likely to be found. You can’t know both where the electron is and

where it is going at the same time. Electrons buzz around the nucleus like gnats

buzzing around your head.

Matter


1) Properties of Phases2) Types of Matter3) Phase Changes

Properties of Phases


Solids: Crystal lattice (regular geometric pattern), vibration motion only

Liquids: particles flow past each other but are still attracted to each other.

Gases: particles are small and far apart, they travel in a straight line until they hit something, they bounce off without losing any energy, they are so far apart from each other that they have effectively no attractive forces and their speed is directly proportional to the Kelvin temperature (Kinetic-Molecular Theory, Ideal Gas Theory)

Solids


The positive and negative ions alternate in the ionic crystal latticeof NaCl.

Liquids


When heated, the ions movefaster and eventuallyseparate from each other to form a liquid. The ions areloosely held together by theoppositely charged ions, butthe ions are moving too fastfor the crystal lattice to staytogether.

Gases


Since all gas molecules spread outthe same way, equal volumes of gas under equal conditions of temperature and pressure will contain equal numbers of molecules of gas. 22.4 L of any gas at STP (1.00 atm and 273K)will contain one mole (6.02 X 1023) gas molecules.

Since there is space between gasmolecules, gases are affected bychanges in pressure.

Types of Matter


Substances (Homogeneous) Elements (cannot be decomposed by chemical

change): Al, Ne, O, Br, H Compounds (can be decomposed by chemical

change): NaCl, Cu(ClO3)2, KBr, H2O, C2H6

Mixtures Homogeneous: Solutions (solvent + solute) Heterogeneous: soil, Italian dressing, etc.

Elements


A sample of lead atoms (Pb). All atoms in the sample consist of lead, so the substance is homogeneous.

A sample of chlorine atoms (Cl). All atoms in the sample consist of chlorine, so the substance is homogeneous.

website

Compounds


Lead has two charges listed, +2 and +4. This is a sample of lead (II) chloride (PbCl2). Two or more elements bonded in a whole-number ratio is a COMPOUND.

This compound is formed from the +4 version of lead. This is lead (IV) chloride (PbCl4). Notice how both samples of lead compounds have consistent composition throughout? Compounds are homogeneous!

website

Mixtures


A mixture of lead atoms and chlorine atoms. They exist in no particular ratio and are not chemically combined with each other. They can be separated by physical means.

A mixture of PbCl2 and PbCl4 formula units. Again, they are in no particular ratio to each other and can be separated without chemical change.

website

Phase Changes


Phase Change Types Phase Change Diagrams Heat of Phase Change Evaporation

Phase Change Types


website

Phase Change Diagrams


AB: Solid PhaseBC: Melting (S + L)CD: Liquid PhaseDE: Boiling (L + G)EF: Gas Phase

Notice how temperature remains constant during a phase change? That’s because the PE is changing, not the KE.

website

Heat of Phase Change


How many joules would it take to melt 100. g of H2O (s) at 0oC?

q=mHf = (100. g)(334 J/g) = 33400 J How many joules would it take to boil 100. g of H2O

(l) at 100oC? q=mHv = (100.g)(2260 J/g) = 226000 J

website

Evaporation


When the surface molecules of a gas travel upwards at a great enough speed to escape.

The pressure a vapor exerts when sealed in a container at equilibrium is called vapor pressure, and can be found on Table H.

When the liquid is heated, its vapor pressure increases.

When the liquid’s vapor pressure equals the pressure exerted on it by the outside atmosphere, the liquid can boil.

If the pressure exerted on a liquid increases, the boiling point of the liquid increases (pressure cooker). If the pressure decreases, the boiling point of the liquid decreases (special cooking directions for high elevations).

Reference Table H: Vapor Pressure of Four Liquids


website

Bonding


1) The Periodic Table2) Ions3) Ionic Bonding4) Covalent Bonding5) Metallic Bonding

The Periodic Table


Metals Nonmetals Metalloids Chemistry of Groups Electronegativity Ionization Energy

Video

Metals


Have luster, are malleable and ductile, good conductors of heat and electricity

Lose electrons to nonmetal atoms to form positively charged ions in ionic bonds

Large atomic radii compared to nonmetal atoms

Low electronegativity and ionization energy

Left side of the periodic table (except H)

Nonmetals


Are dull and brittle, poor conductors Gain electrons from metal atoms to form neg

atively charged ions in ionic bonds

Share unpaired valence electrons with other nonmetal atoms to form covalent bonds and molecules

Small atomic radii compared to metal atoms High electronegativity and ionization energy Right side of the periodic table (except Group

18)

Metalloids


Found lying on the jagged line between metals and nonmetals flatly touching the line (except Al and Po).

Share properties of metals and nonmetals (Si is shiny like a metal, brittle like a nonmetal and is a semiconductor).

Chemistry of Groups


Group 1: Alkali Metals Group 2: Alkaline Earth Metals Groups 3-11: Transition Elements Group 17: Halogens Group 18: Noble Gases

Diatomic Molecules

website

Group 1: Alkali Metals


Most active metals, only found in compounds in nature

React violently with water to form hydrogen gas and a strong base: 2 Na (s) + H2O (l) 2 NaOH (aq) + H2 (g)

1 valence electron Form +1 ion by losing that valence

electron Form oxides like Na2O, Li2O, K2O

Group 2: Alkaline Earth Metals


Very active metals, only found in compounds in nature

React strongly with water to form hydrogen gas and a base: Ca (s) + 2 H2O (l) Ca(OH)2 (aq) + H2

(g) 2 valence electrons Form +2 ion by losing those valence

electrons Form oxides like CaO, MgO, BaO

Groups 3-11: Transition Metals


Many can form different possible charges of ions If there is more than one ion listed, give the

charge as a Roman numeral after the name Cu+1 = copper (I) Cu+2 = copper (II) Compounds containing these metals can be

colored.

Group 17: Halogens


Most reactive nonmetals React violently with metal atoms to form

halide compounds: 2 Na + Cl2 2 NaCl Only found in compounds in nature Have 7 valence electrons Gain 1 valence electron from a metal to

form -1 ions Share 1 valence electron with another

nonmetal atom to form one covalent bond.

Group 18: Noble Gases


Are completely nonreactive since they have eight valence electrons, making a stable octet.

Kr and Xe can be forced, in the laboratory, to give up some valence electrons to react with fluorine.

Since noble gases do not naturally bond to any other elements, one atom of noble gas is considered to be a molecule of noble gas. This is called a monatomic molecule. Ne represents an atom of Ne and a molecule of Ne.

Diatomic Molecules(elements)


Br, I, N, Cl, H, O and F are so reactive that they exist in a more chemically stable state when they covalently bond with another atom of their own element to make two-atom, or diatomic molecules.

Br2, I2, N2, Cl2, H2, O2 and F2

The decomposition of water: 2 H2O 2 H2 + O2

Electronegativity


An atom’s attraction to electrons in a chemical bond. F has the highest, at 4.0 Fr has the lowest, at 0.7 If two atoms that are different in EN (END) from each

other by 1.7 or more collide and bond (like a metal atom and a nonmetal atom), the one with the higher electronegativity will pull the valence electrons away from the atom with the lower electronegativity to form a (-) ion. The atom that was stripped of its valence electrons forms a (+) ion.

If the two atoms have an END of less than 1.7, they will share their unpaired valence electrons…covalent bond!

website

Ionization Energy


The energy required to remove the most loosely held valence electron from an atom in the gas phase.

High electronegativity means high ionization energy because if an atom is more attracted to electrons, it will take more energy to remove those electrons.

Metals have low ionization energy. They lose electrons easily to form (+) charged ions.

Nonmetals have high ionization energy but high electronegativity. They gain electrons easily to form (-) charged ions when reacted with metals, or share unpaired valence electrons with other nonmetal atoms.

website

Ions


Ions are charged particles formed by the gain or loss of electrons. Metals lose electrons (oxidation) to form (+)

charged cations. Nonmetals gain electrons (reduction) to form (-)

charged anions. Atoms will gain or lose electrons in such a way

that they end up with 8 valence electrons (stable octet). The exceptions to this are H, Li, Be and B, which

are not large enough to support 8 valence electrons. They must be satisfied with 2 (Li, Be, B) or 0 (H).

website

Metal Ions (Cations-positive ion)


Na: 2-8-1

Na+1: 2-8

Ca: 2-8-8-2

Ca+2: 2-8-8

Al: 2-8-3

Al+3: 2-8

Note that when the atom loses its valence electron, the next lower PEL becomes the valence PEL.

Notice how the dot diagrams for metal ions lack dots! Place brackets around the element symbol and put the charge on the upper right outside!

Nonmetal Ions (Anions-negative ion)


F: 2-7 F-1: 2-8

O: 2-6 O-2: 2-8

N: 2-5 N-3: 2-8

Note how the ions all have 8 valence electrons. Also note the gained electrons as red dots. Nonmetal ion dot diagrams show 8 dots, with brackets around the dot diagram and the charge of the ion written to the upper right side outside the brackets.

Ionic Bonding


If two atoms that are different in ELECTRONEGATIVITY (END) from each other by 1.7 or more collide and bond (like a metal atom and a nonmetal atom), the one with the higher electronegativity will pull the valence electrons away from the atom with the lower electronegativity to form a (-) ion. The atom that was stripped of its valence electrons forms a (+) ion.

The oppositely charged ions attract to form the bond. It is a surface bond that can be broken by melting or dissolving in water.

Ionic bonding forms ionic crystal lattices, not molecules.

website

Example of Ionic Bonding


Covalent Bonding


If two nonmetal atoms have an END of 1.7 or less, they will share their unpaired valence electrons to form a covalent bond.

A particle made of covalently bonded nonmetal atoms is called a molecule.

If the END is between 0 and 0.4, the sharing of electrons is equal, so there are no charged ends. This is NONPOLAR covalent bonding.

If the END is between 0.5 and 1.7, the sharing of electrons is unequal. The atom with the higher EN will be - and the one with the lower EN will be + charged. This is a POLAR covalent bonding. (means “partial”)

Video

Examples of Covalent Bonding


website

Metallic Bonding


Metal atoms of the same element bond with each other by sharing valence electrons that they lose to each other.

This is a lot like an atomic game of “hot potato”, where metal kernals (the atom inside the valence electrons) sit in a crystal lattice, passing valence electrons back and forth between each other).

Since electrons can be forced to travel in a certain direction within the metal, metals are very good at conducting electricity in all phases.

website

Compounds


1) Types of Compounds2) Formula Writing3) Formula Naming4) Empirical Formulas5) Molecular Formulas6) Types of Chemical Reactions7) Balancing Chemical Reactions8) Attractive Forces

Types of Compounds


Ionic: made of metal and nonmetal ions. Form an ionic crystal lattice when in the solid phase. Ions separate when melted or dissolved in water, allowing electrical conduction (electrolytes-video). Examples: NaCl, K2O, CaBr2

Molecular: made of nonmetal atoms bonded to form a distinct particle called a molecule. Bonds do not break upon melting or dissolving, so molecular substances do not conduct electricity. EXCEPTION: Acids [H+A- (aq)] ionize in water to form H3O+ and A-, so they do conduct.

Network: made up of nonmetal atoms bonded in a seemingly endless matrix of covalent bonds with no distinguishable molecules. Very high m.p., don’t conduct.

website

Ionic Compounds


Ionic Crystal Structure, then adding heat (or dissolving in water) to breakup the crystal into a liquid composed of free-moving ions.

website

Molecular Compounds


website

Network Solids


Network solids are made of nonmetal atoms covalently bonded together to form large crystal lattices. No individual molecules can be distinguished. Examples include C (diamond) and SiO2 (quartz). Corundum (Al2O3) also forms these, even though Al is considered a metal. Network solids are among the hardest materials known. They have extremely high melting points and do not conduct electricity.

Formula Writing


The charge of the (+) ion and the charge of the (-) ion must cancel out to make the formula. Use subscripts to indicate how many atoms of each element there are in the compound, no subscript if there is only one atom of that element.

Na+1 and Cl-1 = NaCl Ca+2 and Br-1 = CaBr2

Al+3 and O-2 = Al2O3

Zn+2 and PO4-3 = Zn3(PO4)2

Try these problems!

website

Formulas to Write


Ba+2 and N-3

NH4+1 and SO4

-2

Li+1 and S-2

Cu+2 and NO3-1

Al+3 and CO3-2

Fe+3 and Cl-1

Pb+4 and O-2

Pb+2 and O-2

Formula Naming


Compounds are named from the elements or polyatomic ions that form them.

KCl = potassium chloride Na2SO4 = sodium sulfate

(NH4)2S = ammonium sulfide

AgNO3 = silver nitrate

Notice all the metals listed here only have one charge listed? So what do you do if a metal has more than one charge listed? Take a peek!

The Stock System


CrCl2 = chromium (II) chloride Try

CrCl3 = chromium (III) chloride Co(NO3)2 and

CrCl6 = chromium (VI) chloride Co(NO3)3

FeO = iron (II) oxide MnS = manganese (II) sulfide Fe2O3 = iron (III) oxide MnS2 = manganese (IV) sulfide The Roman numeral is the charge of the metal ion!

website

Empirical Formulas


Ionic formulas: represent the simplest whole number mole ratio of elements in a compound.

Ca3N2 means a 3:2 ratio of Ca ions to N ions in the compound.

Many molecular formulas can be simplified to empirical formulas Ethane (C2H6) can be simplified to CH3. This is

the empirical formula…the ratio of C to H in the molecule.

All ionic compounds have empirical formulas.

website

Molecular Formulas


The count of the actual number of atoms of each element in a molecule.

H2O: a molecule made of two H atoms and one O atom covalently bonded together.

C2H6O: A molecule made of two C atoms, six H atoms and one O atom covalently bonded together.

Molecular formulas are whole-number multiples of empirical formulas: H2O = 1 X (H2O) C8H16 = 8 X (CH2)

Calculating Molecular Formulas

Types of Chemical Reactions


Redox Reactions: driven by the loss (oxidation) and gain (reduction) of electrons. Any species that does not change charge is called the spectator ion. Synthesis Decomposition Single Replacement

Ion Exchange Reaction: driven by the formation of an insoluble precipitate. The ions that remain dissolved throughout are the spectator ions. Double Replacement

website

website

Synthesis


Two elements combine to form a compound 2 Na + O2 Na2O Same reaction, with charges added in:

2 Na0 + O20 Na2

+1O-2

Na0 is oxidized (loses electrons), is the reducing agent O2

0 is reduced (gains electrons), is the oxidizing agent

Electrons are transferred from the Na0 to the O20.

No spectator ions, there are only two elements here.

Decomposition


A compound breaks down into its original elements. Na2O 2 Na + O2

Same reaction, with charges added in: Na2

+1O-2 2 Na0 + O20

O-2 is oxidized (loses electrons), is the reducing agent Na+1 is reduced (gains electrons), is the oxidizing agent

Electrons are transferred from the O-2 to the Na+1.

No spectator ions, there are only two elements here.

Single Replacement


An element replaces the same type of element in a compound.

Ca + 2 KCl CaCl2 + 2 K Same reaction, with charges added in:

Ca0 + 2 K+1Cl-1 Ca+2Cl2-1 + 2 K0

Ca0 is oxidized (loses electrons), is the reducing agent K+1 is reduced (gains electrons), is the oxidizing agent

Electrons are transferred from the Ca0 to the K+1.

Cl-1 is the spectator ion, since it’s charge doesn’t change.

Double Replacement


The (+) ion of one compound bonds to the (-) ion of another compound to make an insoluble precipitate. The compounds must both be dissolved in water to break the ionic bonds first.

NaCl (aq) + AgNO3 (aq) NaNO3 (aq) + AgCl (s) The Cl-1 and Ag+1 come together to make the

insoluble precipitate, which looks like snow in the test tube.

No species change charge, so this is not a redox reaction.

Since the Na+1 and NO3-1 ions remain dissolved

throughout the reaction, they are the spectator ions. How do identify the precipitate?

Identifying the Precipitate


The precipitate is the compound that is insoluble. AgCl is a precipitate because Cl- is a halide. Halides are soluble, except when combined with Ag+ and others.

website

Balancing Chemical Reactions


Balance one element or ion at a time Use a pencil Use coefficients only, never change

subscripts(formulas) Revise if necessary

The coefficient multiplies everything in the formula by that amount 2 Ca(NO3)2 means that you have 2 Ca, 4 N and

12 O. Examples for you to try!website website

Reactions to Balance


___NaCl ___Na + ___Cl2

___Al + ___O2 ___Al2O3

___SO3 ___SO2 + ___O2

___Ca + ___HNO3 ___Ca(NO3)2 + ___H2

__FeCl3 + __Pb(NO3)2 __Fe(NO3)3 + __PbCl2

Attractive Forces


Molecules have partially charged ends. The + end of one molecule attracts to the - end of another molecule.

Ions are charged (+) or (-). Positively charged ions attract other to form ionic bonds, a type of attractive force.

Since partially charged ends result in weaker attractions than fully charged ends, ionic compounds generally have much higher melting points than molecular compounds.

Determining Polarity of Molecules Hydrogen Bond Attractions

Determining Polarity ofMolecules


-----------------------------------------------------------------------------

website

website

Hydrogen BondAttractions


A hydrogen bond attraction is a very strong attractive force between the H end of one polar molecule and the N, O or F end of another polar molecule. This attraction is so strong that water is a liquid at a temperature where most compounds that are much heavier than water (like propane, C3H8) are gases. This also gives water its surface tension and its ability to form a meniscus in a narrow glass tube.

website

Math of Chemistry


1) Formula Mass2) Percent Composition3) Mole Problems4) Gas Laws5) Neutralization6) Concentration7) Significant Figures and Rounding8) Metric Conversions9) Calorimetry

Formula Mass


Gram Formula Mass = sum of atomic masses of all elements in the compound

Round given atomic masses to the nearest tenth H2O: (2 X 1.0) + (1 X 16.0) = 18.0 grams/mole

Na2SO4: (2 X 23.0)+(1 X 32.1)+(4 X 16.0) = 142.1 g/mole

Now you try: BaBr2

CaSO4

Al2(CO3)3 websiteVideo

Percent Composition


What is the % composition, by mass,of each element in SiO2?

%Si = (28.1/60.1) X 100 = 46.8%%O = (2 X 16.0 = 32.0), (32.0/60.1) X 100 = 53.2%

The mass of part is the number of atoms of that element in the compound. The mass of whole is the formula mass of the compound. Don’t forget to take atomic mass to the nearest tenth! This is a problem for you to try.

website

Practice PercentComposition Problem


What is the percent by mass of each element in Li2SO4?

Mole Problems


Grams <=> Moles Molecular Formula Stoichiometry

Grams <=> Moles


How many grams will 3.00 moles of NaOH (40.0 g/mol) weigh?

3.00 moles X 40.0 g/mol = 120. g

How many moles of NaOH (40.0 g/mol) are represented by 10.0 grams?

(10.0 g) / (40.0 g/mol) = 0.250 molVideo

Molecular Formula


Molecular Formula = (Molecular Mass/Empirical Mass) X Empirical Formula

What is the molecular formula of a compound with an empirical formula of CH2 and a molecular mass of 70.0 grams/mole?

1) Find the Empirical Formula Mass: CH2 = 14.0 2) Divide the MM/EM: 70.0/14.0 = 5 3) Multiply the molecular formula by the result:

5 (CH2) = C5H10

Stoichiometry


Moles of Target = Moles of Given X (Coefficent of Target/Coefficient of given)

Given the balanced equation N2 + 3 H2 2 NH3, How many moles of H2 need to be completely reacted with N2 to yield 20.0 moles of NH3?

20.0 moles NH3 X (3 H2 / 2 NH3) = 30.0 moles H2

website

Gas Laws


Make a data table to put the numbers so you can eliminate the words.

Make sure that any Celsius temperatures are converted to Kelvin (add 273).

Rearrange the equation before substituting in numbers. If you are trying to solve for T2, get it out of the denominator first by cross-multiplying.

If one of the variables is constant, then eliminate it. Try these problems! website

websitewebsite

Gas Law Problem 1


A 2.00 L sample of N2 gas at STP is compressed to 4.00 atm at constant temp-erature. What is the new volume of the gas?

V2 = P1V1 / P2 = (1.00 atm)(2.00 L) /

(4.00 atm) = 0.500 L

Gas Law Problem 2


To what temperature must a 3.000 L sample of O2 gas at 300.0 K be heated to raise the volume to 10.00 L?

T2 = V2T1/V1

= (10.00 L)(300.0 K) / (3.000 L) = 1000. K

Gas Law Problem 3


A 3.00 L sample of NH3 gas at 100.0 kPa is cooled from 500.0 K to 300.0 K and its pressure is reduced to 80.0 kPa. What is the new volume of the gas?

V2 = P1V1T2 / P2T1

= (100.0 kPa)(3.00 L)(300. K) / (80.0 kPa)(500. K) = 2.25 L

Neutralization


10.0 mL of 0.20 M HCl is neutralized by 40.0 mL of NaOH. What is the concentration of the NaOH?

#H MaVa = #OH MbVb, so Mb = #H MaVa / #OH Vb

= (1)(0.20 M)(10.0 mL) / (1) (40.0 mL) = 0.050 M

How many mL of 2.00 M H2SO4 are needed to completely neutralize 30.0 mL of 0.500 M KOH?

website

Concentration


Molarity Parts per Million Percent by Mass Percent by Volume

Molarity


What is the molarity of a 500.0 mL solution of NaOH (FM = 40.0) with 60.0 g of NaOH (aq)? Convert g to moles and mL to L first! M = moles / L = 1.50 moles / 0.5000 L = 3.00 M

How many grams of NaOH does it take to make 2.0 L of a 0.100 M solution of NaOH (aq)? Moles = M X L = 0.100 M X 2.0 L = 0.200 moles Convert moles to grams: 0.200 moles X 40.0 g/mol = 8.00

g

website

Parts Per Million


100.0 grams of water is evaporated and analyzed for lead. 0.00010 grams of lead ions are found. What is the concentration of the lead, in parts per million?

ppm = (0.00010 g) / (100.0 g) X 1 000 000 = 1.0 ppm If the legal limit for lead in the water is 3.0 ppm,

then the water sample is within the legal limits (it’s OK!)

Percent by Mass


A 50.0 gram sample of a solution is evaporated and found to contain 0.100 grams of sodium chloride. What is the percent by mass of sodium chloride in the solution?

% Comp = (0.100 g) / (50.0 g) X 100 = 0.200%

Percent By Volume


Substitute “volume” for “mass” in the above equation.

What is the percent by volume of hexane if 20.0 mL of hexane are dissolved in benzene to a total volume of 80.0 mL?

% Comp = (20.0 mL) / (80.0 mL) X100 = 25.0%

Sig Figs and Rounding


How many Significant Figures does a number have?

What is the precision of my measurement?

How do I round off answers to addition and subtraction problems?

How do I round off answers to multiplication and division problems?

How many Sig Figs?

Start counting sig figs at the first non-zero. All digits except place-holding zeroes are sig

figs.

Measurement # of Sig Figs

234 cm 3

67000 cm 2

_ 45000 cm

4

560. cm 3

560.00 cm 5

Measurement # of Sig Figs

0.115 cm 3

0.00034 cm 2

0.00304 cm 3

0.0560 cm 3

0.00070700 cm 5


website

What Precision?


A number’s precision is determined by the furthest (smallest) place the number is recorded to.

6000 mL : thousands place 6000. mL : ones place 6000.0 mL : tenths place 5.30 mL : hundredths place 8.7 mL : tenths place 23.740 mL : thousandths place

Rounding with addition and subtraction


Answers are rounded to the least precise place.

1) 4.732 cm 2) 17.440 mL 3) 32.0 MW 16.8 cm 3.895 mL + 0.0059 MW + 0.781 cm + 16.77 mL --------------- ---------- -------------- 22.313 cm 38.105 mL 32.0059 MW 22.3 cm 38.11 mL 32.0 MW

Rounding with multiplicationand division


Answers are rounded to the fewest number of significant figures.

1) 37.66 KW 2) 14.922 cm 3) 98.11 kg x 2.2 h x 2.0 cm x 200 m ---------- ----------- ---------- 82.852 KWh 29.844 cm2 19 622 kgm 83 KWh 30. cm2 20 000 kgm

website

Metric Conversions


Determine how many powers of ten difference there are between the two units (no prefix = 100) and create a conversion factor. Multiply or divide the given by the conversion factor.

How many kg are in 38.2 cg?

(38.2 cg) /(100000 cg/kg) = 0.000382 km

How many mL in 0.988 dL?

(0.988 dg) X (100 mL/dL) = 98.8 mL

Calorimetry


This equation can be used to determine any of the variables here. You will not have to solve for C, since we will always assume that the energy transfer is being absorbed by or released by a measured quantity of water, whose specific heat is given above.

Solving for q Solving for m Solving for DT

website

Solving for q


How many joules are absorbed by 100.0 grams of water in a calorimeter if the temperature of the water increases from 20.0oC to 50.0oC?

q = mCDT = (100.0 g)(4.18 J/goC)(30.0oC) = 12500 J

Solving for m


A sample of water in a calorimeter cup increases from 25oC to 50.oC by the addition of 500.0 joules of energy. What is the mass of water in the calorimeter cup?

q = mCDT, so m = q / CDT = (500.0 J) / (4.18 J/goC)(25oC) = 4.8 g

Solving for DT


If a 50.0 gram sample of water in a calorimeter cup absorbs 1000.0 joules of energy, how much will the temperature rise by?

q = mCDT, so DT = q / mC = (1000.0 J)/(50.0 g)(4.18 J/goC) = 4.8oC

If the water started at 20.0oC, what will the final temperature be? Since the water ABSORBS the energy, its temperature will

INCREASE by the DT: 20.0oC + 4.8oC = 24.8oC

Kinetics and Thermodynamics


1) Reaction Rate2) Heat of Reaction3) Potential Energy Diagrams4) Equilibrium5) Le Châtelier’s Principle6) Solubility Curves

Reaction Rate


Reactions happen when reacting particles collide with sufficient energy (activation energy) and at the proper angle.

Anything that makes more collisions in a given time will make the reaction rate increase. Increasing temperature Increasing concentration (pressure for gases) Increasing surface area (solids)

Adding a catalyst makes a reaction go faster by removing steps from the mechanism and lowering the activation energy without getting used up in the process.

website

website

Heat of Reaction


Reactions either absorb PE (endothermic, +DH) or release PE (exothermic, -DH)

Exothermic, PEKE, Temp

Endothermic, KEPE, Temp

Rewriting the equation with heat included:

4 Al(s) + 3 O2(g) 2 Al2O3(s) + 3351 kJ

N2(g) + O2(g) +182.6 kJ 2 NO(g)

Potential Energy Diagrams


Steps of a reactions: Reactants have a certain amount of PE stored

in their bonds (Heat of Reactants) The reactants are given enough energy to

collide and react (Activation Energy) The resulting intermediate has the highest

energy that the reaction can make (Heat of Activated Complex)

The activated complex breaks down and forms the products, which have a certain amount of PE stored in their bonds (Heat of Products)

Hproducts - Hreactants = DH EXAMPLES

websiteVideo

Making a PE Diagram


X axis: Reaction Coordinate (time, no units) Y axis: PE (kJ) Three lines representing energy (Hreactants, Hactivated

complex, Hproducts) Two arrows representing energy changes:

From Hreactants to Hactivated complex: Activation Energy From Hreactants to Hproducts : DH

ENDOTHERMIC PE DIAGRAM EXOTHERMIC PE DIAGRAM

Endothermic PE Diagram


If a catalyst is added?

Endothermic with Catalyst


The red line represents the catalyzed reaction.

Exothermic PE Diagram

(c) 2006, Mark RosengartenWhat does it look like with a catalyst?

Exothermic with a Catalyst


The red line represents the catalyzed reaction. Lower A.E. and faster reaction time!

Equilibrium


When the rate of the forward reaction equals the rate of the reverse reaction.

Examples of Equilibrium


Solution Equilibrium: when a solution is saturated, the rate of dissolving equals the rate of precipitating. NaCl (s) Na+1 (aq) + Cl-1 (aq)

Vapor-Liquid Equilibrium: when a liquid is trapped with air in a container, the liquid evaporates until the rate of evaporation equals the rate of condensation. H2O (l) H2O (g)

Phase equilibrium: At the melting point, the rate of solid turning to liquid equals the rate of liquid turning back to solid. H2O (s) H2O (l)

Le Châtelier’s Principle


If a system at equilibrium is stressed, the equilibrium will shift in a direction that relieves that stress.

A stress is a factor that affects reaction rate. Since catalysts affect both reaction rates equally, catalysts have no effect on a system already at equilibrium.

Equilibrium will shift AWAY from what is added Equilibrium will shift TOWARDS what is removed. This is because the shift will even out the change in

reaction rate and bring the system back to equilibrium

NEXT Video

website

Steps to Relieving Stress


1) Equilibrium is subjected to a STRESS. 2) System SHIFTS towards what is removed from

the system or away from what is added. The shift results in a CHANGE OF CONCENTRATION

for both the products and the reactants. If the shift is towards the products, the

concentration of the products will increase and the concentration of the reactants will decrease.

If the shift is towards the reactants, the concentration of the reactants will increase and the concentration of the products will decrease.

NEXT

Examples


For the reaction N2(g) + 3H2(g) 2 NH3(g) + heat Adding N2 will cause the equilibrium to shift RIGHT,

resulting in an increase in the concentration of NH3 and a decrease in the concentration of N2 and H2.

Removing H2 will cause a shift to the LEFT, resulting in a decrease in the concentration of NH3 and an increase in the concentration of N2 and H2.

Increasing the temperature will cause a shift to the LEFT, same results as the one above.

Decreasing the pressure will cause a shift to the LEFT, because there is more gas on the left side, and making more gas will bring the pressure back up to its equilibrium amount.

Adding a catalyst will have no effect, so no shift will happen.

Solubility Curves


Solubility: the maximum quantity of solute that can be dissolved in a given quantity of solvent at a given temperature to make a saturated solution.

Saturated: a solution containing the maximum quantity of solute that the solvent can hold. The limit of solubility.

Supersaturated: the solution is holding more than it can theoretically hold OR there is excess solute which precipitates out. True supersaturation is rare.

Unsaturated: There are still solvent molecules available to dissolve more solute, so more can dissolve.

How ionic solutes dissolve in water: polar water molecules attach to the ions and tear them off the crystal. LIKE DISSOLVES LIKE

website

Solubility


Solubility: go to the temperature and up to the desired line, then across to the Y-axis. This is how many g of solute are needed to make a saturated solution of that solute in 100g of H2O at that particular temperature.

At 40oC, the solubility of KNO3 in 100g of water is 64 g. In 200g of water, double that amount. In 50g of water, cut it in half.

Video

Supersaturated


If 120 g of NaNO3 are added to 100g of water at 30oC:

1) The solution would be SUPERSATURATED, because there is more solute dissolved than the solubility allows

2) The extra 25g would precipitate out

3) If you heated the solution up by 24oC (to 54oC), the excess solute would dissolve.

Unsaturated


If 80 g of KNO3 are added to 100g of water at 60oC:

1) The solution would be UNSATURATED, because there is less solute dissolved than the solubility allows

2) 26g more can be added to make a saturated solution

3) If you cooled the solution down by 12oC (to 48oC), the solution would become saturated

How Ionic Solutes Dissolve in Water


Water solvent molecules attach to the ions (H end to the Cl-, O end to the Na+)

Water solvent holds the ions apart and keeps the ions from coming back together

Acids and Bases


1) Formulas, Naming and Properties of Acids2) Formulas, Naming and Properties of Bases3) Neutralization4) pH5) Indicators6) Alternate Theories

Formulas, Naming and Properties of Acids


Arrhenius Definition of Acids: molecules that dissolve in water to produce H3O+ (hydronium) as the only positively charged ion in solution.

HCl (g) + H2O (l) H3O+ (aq) + Cl-

Properties of Acids Naming of Acids Formula Writing of Acids

Properties of Acids


Acids react with metals above H2 on Table J to form H2(g) and a salt.

Acids have a pH of less than 7. Dilute solutions of acids taste sour. Acids turn phenolphthalein CLEAR, litmus

RED and bromthymol blue YELLOW. Acids neutralize bases. Acids are formed when acid anhydrides

(NO2, SO2, CO2) react with water for form acids. This is how acid rain forms from auto and industrial emissions.

Naming of Acids


Binary Acids (H+ and a nonmetal) hydro (nonmetal) -ide + ic acid

HCl (aq) = hydrochloric acid Ternary Acids (H+ and a

polyatomic ion) (polyatomic ion) -ate +ic acid

HNO3 (aq) = nitric acid

(polyatomic ion) -ide +ic acid HCN (aq) = cyanic acid

(polyatomic ion) -ite +ous acid HNO2 (aq) = nitrous acid

Formula Writing of Acids


Acids formulas get written like any other. Write the H+1 first, then figure out what the negative ion is based on the name. Cancel out the charges to write the formula. Don’t forget the (aq) after it…it’s only an acid if it’s in water!

Hydrosulfuric acid: H+1 and S-2 = H2S (aq)

Carbonic acid: H+1 and CO3-2 = H2CO3 (aq)

Chlorous acid: H+1 and ClO2-1 = HClO2 (aq)

Hydrobromic acid: H+1 and Br-1 = HBr (aq) Hydronitric acid: Hypochlorous acid: Perchloric acid:

Formulas, Naming and Properties of Bases


Arrhenius Definition of Bases: ionic compounds that dissolve in water to produce OH- (hydroxide) as the only negatively charged ion in solution.

NaOH (s) Na+1 (aq) + OH-1 (aq)

Properties of Bases Naming of Bases Formula Writing of Bases

Properties of Bases


Bases react with fats to form soap and glycerol. This process is called saponification.

Bases have a pH of more than 7. Dilute solutions of bases taste bitter. Bases turn phenolphthalein PINK, litmus BLUE and

bromthymol blue BLUE. Bases neutralize acids. Bases are formed when alkali metals or alkaline

earth metals react with water. The words “alkali” and “alkaline” mean “basic”, as opposed to “acidic”.

Naming of Bases


Bases are named like any ionic compound, the name of the metal ion first (with a Roman numeral if necessary) followed by “hydroxide”.Fe(OH)2 (aq) = iron (II) hydroxide

Fe(OH)3 (aq) = iron (III) hydroxide

Al(OH)3 (aq) = aluminum hydroxide

NH3 (aq) is the same thing as NH4OH:

NH3 + H2O NH4OH

Also called ammonium hydroxide.

Formula Writing of Bases


Formula writing of bases is the same as for any ionic formula writing. The charges of the ions have to cancel out.

Calcium hydroxide = Ca+2 and OH-1 = Ca(OH)2 (aq) Potassium hydroxide = K+1 and OH-1 = KOH (aq) Lead (II) hydroxide = Pb+2 and OH-1 = Pb(OH)2 (aq)

Lead (IV) hydroxide = Pb+4 and OH-1 = Pb(OH)4 (aq)

Lithium hydroxide = Copper (II) hydroxide = Magnesium hydroxide =

Neutralization


H+1 + OH-1 HOH Acid + Base Water + Salt (double replacement) HCl (aq) + NaOH (aq) HOH (l) + NaCl (aq) H2SO4 (aq) + KOH (aq) 2 HOH (l) + K2SO4 (aq) HBr (aq) + LiOH (aq) H2CrO4 (aq) + NaOH (aq) HNO3 (aq) + Ca(OH)2 (aq) H3PO4 (aq) + Mg(OH)2 (aq)

website

pH


A change of 1 in pH is a tenfold increase in acid or base strength.

A pH of 4 is 10 times more acidic than a pH of 5. A pH of 12 is 100 times more basic than a pH of 10.

website

Indicators


At a pH of 2:

Methyl Orange = red

Bromthymol Blue = yellow

Phenolphthalein = colorless

Litmus = red

Bromcresol Green = yellow

Thymol Blue = yellow

Methyl orange is red at a pH of 3.2 and below and yellow at a pH of 4.4 and higher. In between the two numbers, it is an intermediate color that is not listed on this table.

website

Alternate Theories


Arrhenius Theory: acids and bases must be in aqueous solution.

Alternate Theory: Not necessarily so! Acid: proton (H+1) donor…gives up H+1 in a reaction. Base: proton (H+1) acceptor…gains H+1 in a reaction.

HNO3 + H2O H3O+1 + NO3-1

Since HNO3 lost an H+1 during the reaction, it is an acid.

Since H2O gained the H+1 that HNO3 lost, it is a base.

Website-video

Oxidation and Reduction


1) Oxidation Numbers2) Identifying OX, RD and SI Species3) Agents4) Writing Half-Reactions5) Balancing Half-Reactions6) Activity Series7) Voltaic Cells8) Electrolytic Cells9) Electroplating

Oxidation Numbers


Elements have no charge until they bond to other elements. Na0, Li0, H2

0. S0, N20, C60

0

The formula of a compound is such that the charges of the elements making up the compound all add up to zero.

The symbol and charge of an element or polyatomic ion is called a SPECIES.

Determine the charge of each species in the following compounds:

NaCl KNO3 CuSO4 Fe2(CO3)3

Video

website

Identifying OX, RD, SI Species


Ca0 + 2 H+1Cl-1 Ca+2Cl-12 + H2

0

Oxidation = loss of electrons. The species becomes more positive in charge. For example, Ca0 Ca+2, so Ca0 is the species that is oxidized.

Reduction = gain of electrons. The species becomes more negative in charge. For example, H+1 H0, so the H+1 is the species that is reduced.

Spectator Ion = no change in charge. The species does not gain or lose any electrons. For example, Cl-1 Cl-1, so the Cl-1 is the spectator ion.

website

website

Agents


Ca0 + 2 H+1Cl-1 Ca+2Cl-12 + H2

0

Since Ca0 is being oxidized and H+1 is being reduced, the electrons must be going from the Ca0 to the H+1.

Since Ca0 would not lose electrons (be oxidized) if H+1 weren’t there to gain them, H+1 is the cause, or agent, of Ca0’s oxidation. H+1 is the oxidizing agent.

Since H+1 would not gain electrons (be reduced) if Ca0 weren’t there to lose them, Ca0 is the cause, or agent, of H+1’s reduction. Ca0 is the reducing agent.

Writing Half-Reactions


Ca0 + 2 H+1Cl-1 Ca+2Cl-12 + H2

0

Oxidation: Ca0 Ca+2 + 2e- Reduction: 2H+1 + 2e- H2

0

The two electrons lost by Ca0 are gained by the two H+1 (each H+1 picks up an electron).

PRACTICE SOME!

Video

Practice Half-Reactions


Don’t forget to determine the charge of each species first!

4 Li + O2 2 Li2O Oxidation Half-Reaction: Reduction Half-Reaction:

Zn + Na2SO4 ZnSO4 + 2 Na Oxidation Half-Reaction: Reduction Half-Reaction:

Balancing Half-Reactions


Ca0 + Fe+3 Ca+2 + Fe0

Ca’s charge changes by 2, so double the Fe. Fe’s charge changes by 3, so triple the Ca.

3 Ca0 + 2 Fe+3 3 Ca+2 + 2 Fe0

Try these: __Na0 + __H+1 __Na+1 + __H2

0

(hint: balance the H and H2 first!)

__Al0 + __Cu+2 __Al+3 + __Cu0

website

Activity Series


For metals, the higher up the chart the element is, the more likely it is to be oxidized. This is because metals like to lose electrons, and the more active a metallic element is, the more easily it can lose them.

For nonmetals, the higher up the chart the element is, the more likely it is to be reduced. This is because nonmetals like to gain electrons, and the more active a nonmetallic element is, the more easily it can gain them.

Metal Activity


Metallic elements start out with a charge of ZERO, so they can only be oxidized to form (+) ions.

The higher of two metals MUST undergo oxidation in the reaction, or no reaction will happen.

The reaction 3 K + FeCl3 3 KCl + Fe WILL happen, because K is being oxidized, and that is what Table J says should happen.

The reaction Fe + 3 KCl FeCl3 + 3 K will NOT happen.

3 K0 + Fe+3Cl-13

REACTION

Fe0 + 3 K+1Cl-1

NO REACTION

Voltaic Cells


Produce electrical current using a spontaneous redox reaction

Used to make batteries! Materials needed: two beakers, piece of the oxidized

metal (anode, - electrode), solution of the oxidized metal, piece of the reduced metal (cathode, + electrode), solution of the reduced metal, porous material (salt bridge), solution of a salt that does not contain either metal in the reaction, wire and a load to make use of the generated current!

Use Reference Table J to determine the metals to use Higher = (-) anode Lower = (+) cathode

Animation

Animation

Making Voltaic Cells


Create

Your

Own

Cell!!!!

More

Info!!!

How It Works


The Zn0 anode loses 2 e-, which go up the wire and through the load. The Zn0 electrode gets smaller as the Zn0 becomes Zn+2 and dissolves into solution. The e- go into the Cu0, where they sit on the outside surface of the Cu0 cathode and wait for Cu+2 from the solution to come over so that the e- can jump on to the Cu+2 and reduce it to Cu0. The size of the Cu0 electrode increases. The negative ions in solution go over the salt bridge to the anode side to complete the circuit.

Since Zn is listed above Cu, Zn0 will be oxidized when it reacts with Cu+2. The reaction: Zn + CuSO4 ZnSO4 + Cu

You Start At The Anode


Vital to make a batteryIs this electrochemistryYou take two half-cellsAnd connect them up so wellWith a load to power in between

You need to have electrodes you seeFull of that metallicityLet electrons flowAcross the salt bridge we go!Allowing us to make electricity

We start the anodeElectrons are lost thereAnd go through the wireAnd through the load on fireThey get to the cathodeAnd reduce the cationsAnd the anions go through the salt bridgeBack to where…WHERE?

Make Your Own Cell!!!


Electrolytic Cells


Use electricity to force a nonspontaneous redox reaction to take place.

Uses for Electrolytic Cells: Decomposition of Alkali Metal Compounds Decomposition of Water into Hydrogen and

Oxygen Electroplating

Differences between Voltaic and Electrolytic Cells: ANODE: Voltaic (-)

Electrolytic (+) CATHODE: Voltaic (+) Electrolytic (-) Voltaic: 2 half-cells, a salt bridge and a load Electrolytic: 1 cell, no salt bridge, IS the load

Website & Video

Video

Decomposing AlkaliMetal Compounds


2 NaCl 2 Na + Cl2

The Na+1 is reduced at the (-) cathode, picking up an e- from the battery

The Cl-1 is oxidized at the (+) anode, the e- being pulled off by the battery (DC)

Decomposing Water


2 H2O 2 H2 + O2

The H+ is reduced at the (-) cathode, yielding H2 (g), which is trapped in the tube.

The O-2 is oxidized at the (+) anode, yielding O2 (g), which is trapped in the tube.

Electroplating


The Ag0 is oxidized to Ag+1 when the (+) end of the battery strips its electrons off.

The Ag+1 migrates through the solution towards the (-) charged cathode (ring), where it picks up an electron from the battery and forms Ag0, which coats on to the ring.

Organic Chemistry


1) Hydrocarbons2) Substituted Hydrocarbons3) Organic Families4) Organic Reactions

Hydrocarbons


Molecules made of Hydrogen and Carbon Carbon forms four bonds, hydrogen forms one bond Hydrocarbons come in three different homologous

series: Alkanes (single bond between C’s, saturated) Alkenes (1 double bond between 2 C’s, unsaturated) Alkynes (1 triple bond between 2 C’s, unsaturated)

These are called aliphatic, or open-chain, hydrocarbons.

Count the number of carbons and add the appropriate suffix! website

Vocabulary



Nucleon – particle found in the nucleus of an atom – includes the proton and neutron only – equal to the mass number of an atomIsotope – atoms of the same element which have the same atomic number but different mass numberAtomic Number - equal to the number of protons in the nucleus of an atomMass Number - equal to the sum of the protons and neutrons in the nucleus of an atom.Nuclear charge - equal to the number of protons in the nucleus of an atom.Alpha Particle – A radioactive particle equivalent to a helium nucleus (2 protons, 2 neutrons) - Mass of 4 and a +2 chargeBeta Particle – A radioactive particle equivalent to an electron. Has no mass and -1 chargePositron – A radioactive particle equivalent to an positively charged electron. Has no mass and +1 chargeGamma Rays – High energy light given off during a nuclear process – Have no mass or chargeFission – A nuclear reaction where a large nucleus breaks up into smaller ones. This is what happens in nuclear power plantsFusion - process where two or more small nuclei combine to form a larger nucleus. Fusion is the reverse process of nuclear fission


Valence Electron – Electrons in the outermost energy level (furthest away from the nucleus) – Generally the only electrons involved in chemical reactions.Electron Dot Diagram (EDD) – Symbol of an element surrounded by dots which represent valence elctronsStable Octet - The octet rule is a rule that states that atoms tend to combine in such a way that they each have eight electrons in their valence shells, giving them the same electronic configuration as a noble gas.Bright Line Spectrum - When electrons jump from the excited state to the ground state, the electrons emit energy in the form of light, producing a bright-line spectrum. Each element has its own unique bright-line spectrum. Orbital- Regions of the most probable electron location in the wave-mechanical model of the atomSolid – phase of matter with a definite shape and volume and low entropy – particles arranged in a regular geometric pattern


Liquid – phase of matter that has a definite volume but takes shape of its containerGas – phase of matter that takes the shape of & fills its entire container – has high entropy.Element - substances that are composed of atoms that have the same atomic number. Elements cannot be broken down by chemical change.Compound - substance composed of two or more different elements that are chemically combined in a fixed proportion. A chemical compound can be broken down by chemical means.Mixture - composed of two or more different substances that can be separated by physical means.When different substances are mixed together, a homogeneous or heterogeneous mixture is formed.Homogeneous Mixture – Components are evenly distributed – Also called solutions.Heterogeneous Mixture – Components are unevenly distributed


Solution - a homogeneous mixture of a solute dissolved in a solventMelting – a phase change in which a solid changes to a liquidBoiling – the process of rapidly converting a liquid to its gaseous (vapor) state, typically by heating the liquid to a temperature called its boiling point.Boiling Point - temperature at which the vapor pressure is equal to the pressure of the gas above it.Freezing - a phase change in which a liquid cools and changes to a solidCondensation - a phase change in which a gas cools and changes to a liquidSublimation - When a solid can change directly into a gas skipping the liquid phaseEvaporation – a phase change in which a liquid changes to a gasExothermic – process which releases energy causing the temperature of its surroundings to increase


Endothermic – process which absorbs energy causing the temperature of its surroundings to decreaseHeat of Fusion – Amount of heat in Joules or KF required to melt 1 gram of ice to waterHeat of Vaporization - Amount of heat in Joules or KF required to vaporize 1 gram of water to vaporMetals – Found on the left side of the Periodic table – Are malleable, ductile, lustrous, good conductors and form positive ionsMalleable – can be pounded into thin sheetsDuctile – can be stretched into wireLuster - shinyNonmetals – Found on the right side of the Periodic table – Are brittle, dull, poor conductors and form negative ionsMetalloids – have the properties of both metals and nonmetals – found along the stair-step lineIonization energy – amount of energy required to remove the most loosely held electron in an atom – Values found on table S


Electronegativity – The attraction a nucleus has for electrons in a bond – Values found on Table S – Fluorine has highestAlkali metals – Group 1 metals - Most active metals, only found in compounds in nature – Form +1 ionsAlkaline Earth Metals – Group 2 metals - Very active metals, only found in compounds in nature – Form +2 ionsTransition Metals – Groups 3-11 - Many can form different possible charges of ions - Compounds containing these metals can be colored.Halogens – Group 17 nonmetals – Most reactive nonmetals – Fluorine most activeNoble Gases - Are completely nonreactive since they have eight valence electrons, making a stable octet.Diatomic Elements - Br2, I2, N2, Cl2, H2, O2 and F2

Ions - charged particles formed by the gain or loss of electrons.


Positive Ion – Formed when an atom, usually a metal, loses 1 or more electronsNegative Ion – Formed when an atom, usually a nonmetal, gains 1 or more electrons.Ionic bond – bond that forms when a metal transfers valence electrons to a nonmetal. Covalent bond – bond that forms when nonmetals share valence electronsMetallic Bond – Bond that forms between metal atoms such as in copper wire – Described as “positve ions in a sea of mobile electrons”Ionic Compound - made of metal and nonmetal ions. Molecular Compound - made of nonmetal atoms bonded to form a distinct particle called a molecule. REDOX Reaction – Short for oxidation-reduction - driven by the loss (oxidation) and gain (reduction) of electrons.


Oxidation – loss of electrons – oxidation number increasesReduction – gain of electrons – oxidation number decreasesPrecipitate – compound that forms as a result of a double replacement reaction which is insoluble in waterIntermolecular Attractive Forces(IMAF) – force of attraction between molecules such as hydrogen bonding, dipole-dipole, etc…Hydrogen Bond – A special type of dipole-dipole attraction that occurs when hydrogen is bonded to N, O or F.Gram Formula Mass - sum of atomic masses of all elements in the compound – equal to the mass of one mole of a compoundCatalyst – speeds up a chemical reaction by lowering the activation energy.Activation Energy – amount of energy needed to start a reactionHeat of Reaction(DH) – amount of heat absorbed or released during a chemical reaction


Chemical Equilibrium – When the rate of the forward and reverse reactions are equalSolubility - the maximum quantity of solute that can be dissolved in a given quantity of solvent at a given temperatureArrhenius Acid - molecules that dissolve in water to produce H+ or H3O+ (hydronium) as the only positively charged ion in solution.Arrhenius Base - molecules that dissolve in water to produce OH- (hydroxide) as the only negatively charged ion in solution.Bronsted-Lowry Acid – proton (H+) donorBronsted-Lowry Base – proton (H+) acceptorVoltaic cell - Produce electrical current using a spontaneous redox reaction – used to make batteriesElectrolytic cell - Use electricity to force a nonspontaneous redox reaction to take place.Anode – electrode at which oxidation occursCathode – electrode at which reduction occurs


Salt bridge – allows for the movement of ionsHydrocarbons - Molecules made of Hydrogen and CarbonAlkanes – saturated hydrocarbons with only single bonds between carbon atomsAlkenes – unsaturated hydrocarbons with at least one double bond between carbon atomsAlkynes – unsaturated hydrocarbons with at least one triple bond between carbon atomsEsterification - reaction between an alcohol and organic acid which produces an ester and waterFermentation – reaction of a sugar with an enzyme that produces alcohol and CO2

Polymerization – process of joining many small molecules(monomers) to make a large molecule(polymer).Saponification – A fat or oil reacts with a strong base and produces a soap


Isomer – compounds that have the same chemical formula but different structures

how to prepare (c) 2006, mark rosengarten do not cram. get your studying done with by the night...

Documents

atomic mass unit3216s

mark rosengartenwam

mark rosengartenisotopesc

mark rosengartenoutline

mark rosengartennucleonsc

mark rosengartenprotons

mark rosengartenatoms

mark rosengartendo