how to make ribbon heart with simple material
DESCRIPTION
A tutorial of how to make ribbon heart may arouse your interest. You can hang the ribbon heart on the wall, or hang it in the car as you like. It is really an exquisite and practical handcraft.TRANSCRIPT
How to make ribbon heart with simple material
Material you need when you are making the ribbon
heart:
A roll of red ribbon (1cm wide)
A pair of scissors
Instructions for making the ribbon heart:
Step1: cut and fold
1. You should cut four strips of ribbon by the
length of 30cm. Fold each of them by the
percentage of 11:19.
2. Cross the four strips of ribbon in sequence,
the longer part must be placed in underneath,
tighten it after you cross the ribbon and it will
form the shape of a “+”. Then fold up it with
the longer ribbon, tighten it.
A tutorial of how to make ribbon heart may arouse your interest. You can hang the ribbon heart on the wall,
or hang it in the car as you like. It is really an exquisite and practical handcraft.
Many people like to decorate their house
when an important festival is coming,
especially the new year. Because near year
means a newly start. The ribbon heart that
I introduce today can add the festive
atmosphere. Fervent and jubilant. Now go
with me to learn how to make ribbon heart.
Step2: fold triangles
1. Fold a triangle downward with the longer strip and fold another triangle upside.
2. Use the rest of three strips of ribbon to repeat the steps. Every strip of ribbon will form two
triangles. Insert it to the edge of the second triangle and tighten. Connect three strips of
ribbon in order.
Step3: form the shape of “#”
1. Pass through the fourth strips of ribbon down to
the square, and so do the other three strips of
ribbon. The shape will look like “#”. Folding 18
triangles is ok.
2. Take two“#”; connect the bilaterally two strips of
ribbon together. Take six“#” and do the same, it
will become a circle.
3. Now, you just need to adjust the shape and let it
form the shape of ribbon heart.
Step4: connect it
1. Take two ribbon hearts; switch it on the
upper and contiguous part.
2. Take“#”, connect it in the middle, and turn
the ribbon heart over, connect the other three
“#” in the same way. Take 2 “#”, connect 16
edges and it will form the shape of a round.
Two rounds are enough.
Here is the whole tutorial of how to make
ribbon heart, if you are interested in ribbon
heart, make one and hang it in your house to
welcome the New Year.
Get other décor of the ribbon heart please click:
http://www.lovehobbycraft.com/b-441-home-decor.html