how to install floor muffler ultra seal underlayment
DESCRIPTION
This illustrated guide will show you with detailed step-by-step pictures how to install Floor Muffler Ultraseal 2mm Flooring Underlayment. (Available here: http://bit.ly/VOCeta)TRANSCRIPT
How to Install Floor Muffler Underlayment
A Flooring Guide by Bestlaminate
Save Money!
• Save 25-50% on your floor installation cost by doing it yourself!
Supply List:
• Enough Floor Muffler Underlayment
• Flooring
• Broom
• Tape
• Utility Knife
Step 1: Clean Subfloor is Necessary
Make sure subfloor is spic and span - free of loose debris and dirt.
• Subfloor must be in good repair, free of obstacles, and dry.
Step 2: Subfloor Inspection
Signs of a bad subfloor:
• Your subfloor might need repair if it has these signs:
– Cracks
– Holes
– Protruding objects
– Unevenness
Step 3: Getting Started
• Roll out Floor Muffler Underlayment directly next to wall.
Step 4: Install Against the Wall
– Install with tape strip side next to wall
– Install with overlapping -film toward the open room.
Step 5: Parallel Installation
• Install parallel to the wall in the same direction as you plan to install the flooring planks.
Step 6: Cut Underlayment
• Cut Underlayment to fit when section is completed
Step 7: Unfold Film
• Before installing next roll, be sure to unfold film to join with new roll.
Step 8: Keep on Rolling
• Roll out the next roll of FloorMuffler UltraSeal in same orientation of previous row.
Step 9: Keeping it Together
• Make sure that the foam seams are butted together.
Step 10: Overlap Warning
• Overlap only the excess film and not the edges of the underlayment
Step 11: Remove and Stick
• Remove the adhesive liner and stick the foam to the film overlap.
Acclimate Your Flooring
• 48 hours before installation
Step 12: Keep Going
• Install the flooring per manufacturer’s instructions plank by plank completing your room a section at a time.
www.bestlaminate.com
Facebook.com/Bestlaminate
Twitter.com/Bestlaminate