how to install felt cushion 3-in-1 underlayment
DESCRIPTION
This illustrated guide will show you with detailed step-by-step pictures how to install Felt Cushion 3-in-1 Flooring Underlayment. (Available here: http://bit.ly/1w1ulw5)TRANSCRIPT
Step 1: Clean Subfloor subfloor needs to be free of dirt or
debris prior to installation
• Check your subfloor for these negative signs
• Cracks
• Holes
• Protruding objects
• Unevenness
• moisture
Step 2: Roll Out Underlayment
• Tape side next to the wall
• Vapor Barrier side against subfloor
Roll out the right way
• Make sure tape strip is next to the wall and overlapping film is towards open room
Step 3: Cut Section cut your section, because of the felt be
sure to use sharp blades
Step 4: Roll out Next Section roll out next row directly next to
previous row in same manner
Step 5: Butt next Section
• Butt section close to the first row
• Should be covering the overlapping film
Step 6: Remove Tape
• Remove tape liner & secure overlapping film to it
Step 7: Cut another section cut your next section to proceed
onward with installation
Step 8: Continue Installation install flooring by sections following
manufacturers instructions
Thank you
• Contact us:
www.bestlaminate.com 1-800-520-0961
Facebook.com/Bestlaminate
@Bestlaminate