HOW TO BUILD A ONE-PRIM BAR STOOL

By Willy - SHS

First, right click on the ground (somewhere that you can build things) and hit create or hit the “build” button on the menu

The building window will show up, you can build a lot of things using this window.

Then select the tube and click on the ground to build it (you can click anywhere you want). The tube will appear on the place you click and the building window will also

change.

After that you change from the General tab to Object tab. Then stretch the prim to make it bigger or change it to the size you want by changing those X,Y,Z in the building window or just

holding Ctrl+ Shift and stretch it

The you change the hole size Y value to 0.50 to make the hole in the middle of the tube disappear

After that, you also have to change the profile cut begin and end values. B= 0.15 E= 0.95 The shape of the tube will be narrower in the middle

The next step is to increase the Hollow value to 85. The tube will change to a stool

Now you should apply a texture to your stool or color it

Now, go back to the General tab. At the bottom of the window, select “Sit on object” in the drop down list of “When left-clicked”

Finally, enjoy you work