how class works
DESCRIPTION
Measurement of Stream Discharge by Wading Water Resources Investigations Report 00-4036 By K. M. Nolan and R. R. Shields. How class works. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/1.jpg)
Measurement of Stream Discharge by WadingWater Resources Investigations Report 00-4036
By K. M. Nolan and R. R. Shields
![Page 2: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/2.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
How class works
• Instructions for viewing and navigating through this training class can be found in the “Intro.html” file, which is on the CD-ROM containing this presentation.
![Page 3: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/3.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Class Credit
• Listed as Training Class SW1271 with the National Training Center of U.S. Geological Survey
• Supervisor may ask to see a copy of the completed test
![Page 4: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/4.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Links to reference materials
http://wwwrcamnl.wr.usgs.gov/sws/fieldmethods
USGS memos
Linked Text
![Page 5: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/5.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Agenda• How this class works• The velocity-area concept• Making the measurement
• Measuring width • Measuring depth• Wading rod use• Measuring velocity• Site selection
• Safety• Measurement notes• Blackfoot River as an example
• Starting the measurement• The front sheet• Inside the note sheet• Job Hazard Analysis
• Horizontal angle correction• Computing subsection widt
h and depth• Recording velocity• Recording discharge
• Finalizing measurement• Mean Gage Height• Accuracy• The control• Point of zero flow• Plotting on rating
• Test• References• Acknowledgements
![Page 6: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/6.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
x Water Velocity
Cross section area
Discharge = (Area of water in cross section) x (Water velocity)
THE VELOCITY-AREA METHOD
![Page 7: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/7.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Discharge of each sub-section = Area x Average Water Velocity
Channel cross section is divided into numerous sub sections
![Page 8: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/8.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Width
Depth
Area = Width x Depth
Area of each sub-section determined by directly measuring width and depth
![Page 9: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/9.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Water velocity in each sub-sectionis estimated using a current meterto measure water velocity atselected locations
![Page 10: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/10.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Total Discharge = ((Area1 x Velocity 1) + (Area2 x Velocity2) + ….. (Arean x Velocityn))
1 2 3
Stream discharge is sum of discharges inall sub-sections
n
![Page 11: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/11.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Making the Measurement• Verticals should be spaced so
no subsection has more than 10% of the total discharge
• Ideal measurement has no more than 5% of total discharge in any subsection
• Should have between 20 and 30 subsections
• Spacing between verticals should be closer in those parts of cross section with greater depths and velocities.
![Page 12: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/12.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Measuring Cross-Section AreaWidth
![Page 13: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/13.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Measuring Cross-Section AreaWidth (cont.)
•Taglines usually have marks
• One mark every 2 ft
• Some taglines have:
• Two marks every 10 ft
• Three marks every 100 ft.
• Distances between marks are estimated or measured
![Page 14: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/14.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Measuring Cross-Section AreaDepth
•Wading rod is marked every 0.1 foot
![Page 15: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/15.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Wading Rod UseTop Setting Mechanism
![Page 16: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/16.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
10 8 6 4 2 0
2
6
5
4
3
7
8
0.6 Depth
2.6 ft.TotalDepth
0.8Depth
0.2 depth
SettingRodDepth
Scale
Rod set so meter placed at 0.6 (2.6 ft)
2.08 ft.
0.52 ft.
1.04 ft.
Wading Rod Use (cont.)
![Page 17: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/17.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Wading Rod Use (cont.) • Must estimate depth when velocity
causes “pile-up” on rod.
• Visually extend water surface to rod.
![Page 18: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/18.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Wading Rod Use• Stand beside and downstream of rod
![Page 19: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/19.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Velocity Determination
• USGS generally uses Price current meters
• AA for large depths
• Pygmy for shallow depths
Standard AA Meter
Pygmy Meter
See OSW memos 85.07 and 85.14
![Page 20: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/20.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Meter Depthrange(ft.)
Recommendedvelocity range
(ft/s)Price AA > 1.5 0.10 - 12
Pygmy 0.3 – 1.5 0.5 - 12
Meter Use
![Page 21: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/21.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Spin Tests• A spin test should be performed on
all meters:
• Before each field trip
• When performance is suspect.
• Before and after repairs
• A log of all spin tests must be maintained
• See OSW memo 89.07 for policy on spin tests
![Page 22: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/22.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Meter Performance
• Meter performance should also be checked before and after each measurement
• Spin meter and note if meter spins freely and comes to gradual stop
![Page 23: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/23.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Meter Care
• Meter care and maintenance is discussed in OSW memorandum 99.06
![Page 24: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/24.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Headset and Stopwatch
• Velocity is determined by placing meter in stream and counting number of revolutions in a measured amount of time
Stop Watch and Headset
![Page 25: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/25.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Digitizer, Aquacalc and DMX 1
• Newer units are now available that compute velocity and/or discharge
Digitizer
Aquacalc
DMX
1Use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government
![Page 26: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/26.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Marking Meter• Meter revolutions can
sometimes be counted manually by marking one meter cup.
![Page 27: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/27.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Rating Table
• Velocity can then determined using a current-meter rating table
Partial listing of standard rating #2
![Page 28: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/28.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Rating Table Equations• Equations for standard Rating Tables:
For AA meter• V = 2.2048 R + 0.0178For pygmy meter
• V = 0.9604 R + 0.0312
R = Revolutions per second
See:• OSW Memo 99.05• Standard rating table #2 for AA meter • Standard rating table #2 for Pygmy meter
![Page 29: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/29.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Velocity from Digitizer, Aquacalc, and DMX
• Current meter digitizers Aquacalcs and DMX units have equations for rating table built in.
• These devices provide direct computation of velocity
![Page 30: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/30.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Measure velocity for at least 40 seconds
• Velocity should be measured for at least 40 seconds
• Evens out short-term velocity fluctuations
![Page 31: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/31.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Average Velocity• The goal is to represent the
average velocity in the vertical
• Measured at 0.6 the depth when depths are shallow
• Measured at 0.2 and 0.8 the depth when depths are large. These two velocities are averaged to represent average velocity in the vertical
Typical velocity profile
0
10
20
30
40
50
60
70
80
90
100
0 0.5 1 1.5
Velocity, in feet per second
Dis
tanc
e be
low
wat
er s
urfa
ce in
pe
rcen
tage
of
tota
l dep
th
![Page 32: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/32.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Velocity Measurement Methods
Guide to velocity-measurement methodsDepth, in ft. Meter Velocity Method
2.5 ft and above Type AA 0.2 and 0.8
1.5 – 2.5 Type AA 0.6
0.3 – 1.5 Pygmy 0.6
1.5 ft and above Pygmy 0.2 and 0.8
![Page 33: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/33.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Non Standard Conditions• Use of 0.6 and 0.2/0.8 methods
assume velocity profile is logarithmic.
• Velocity should decrease closer to bottom due to friction
• If velocity at 0.8 depth is greater than velocity at 0.2 depth or if velocity at 0.2 depth is twice the velocity at 0.8 depth then the velocity profile is considered abnormal and the three-point method must be used (see next slide).
![Page 34: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/34.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
0
10
20
30
40
50
60
70
80
90
100
0 0.5 1 1.5
Velocity, in feet per second
Dis
tanc
e be
low
wat
er s
urfa
ce in
pe
rcen
tage
of
tota
l dep
th
Three-Point Method• Three-point method
computed by averaging velocity measured at 0.2 and 0.8 the depth and averaging that result with velocity measured at 0.6 the depth.
![Page 35: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/35.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Site Selection• Reach should be straight
and uniform for a long enough distance to provide uniform flow through the measuring section
• Streambed should be stable and free of large rocks, weeds, and protruding obstructions.
Upstream view of excellent measuring section, Little Blackfoot River
![Page 36: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/36.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
ControlMeasurement Section
W
5W 2W
Site Selection (cont.)
• Straight and uniform for a distance long enough to support uniform flow
Rif
fle
Flow
![Page 37: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/37.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety - First
Standard PFDThrow Bag
Inflatable PFD
“Safety First, Every Job, Every Time”(Department of Interior Policy)
![Page 38: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/38.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety – On Line
http://wwwhif.er.usgs.gov/uo/safety.html
![Page 39: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/39.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety – Memo 99.32
Water Resources Division Memorandum 99.32
![Page 40: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/40.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety – miscellaneous memosMemo Number Description
Personal Floatation DevicesOP 88.01 Use of Life Jackets and Personal Flotation Devices
Confined SpaceWRD 94.30 Plan for Insuring Safe Work in Gaging Station Stilling WellsWRD 97.32 Updated Interim Safety Guidelines for Safe Entry and Work in
WRD Gaging StationsWRD 95.02 Plan for Insuring Safe Work in Gaging Station Stilling Wells –
A Follow-up to WRD Memorandum 94.30WRD 98.17 WRD Respiratory Protection Program Requirement
Safety at USGS Gaging StationsWRD 69.92 Field Installation Safety RequirementsOP 94.01 Hantavirus Infection PreventionWRD 97.32 WRD Gaging Station Stilling Wells
USGS Gaging Stations with Mercury ManometersWRD 91.58 WRD Policy on Phase-Out of ManometersWRD 92.32 WRD Policy on Phase–Out of ManometersHIF 92.14 Instructions on Disposing of Mercury ManometersOP 96.03 Supplies Information on Disposal of Mercury Manometers
Use of Government VehiclesWRD 98.25 Motor Vehicle Driver Training
Cli
ck o
n pa
ge im
age
to v
iew
mem
o
![Page 41: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/41.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety – ResponsibilitiesWRD Memo 99.32 - “Both supervisors and employees will be held accountable if safety policies are not followed.”
Winter measurementSnake River near Moran, WY
![Page 42: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/42.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety - PFDs
See WRD Memo 99.32• Personal Flotation Devices (PFDs) must be worn
unless the job hazard analysis states otherwise.
Standard PFD Suspender-type PFD
![Page 43: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/43.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
• Protection against hypothermia is required when conditions warrant.
• WRD Safety Home Page contains information on protection against hypothermia
• Use of cold water protective Personal Flotation Devices increases protection against hypothermia
Float Coat
Safety- Hypothermia
![Page 44: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/44.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety - Rescue• Look downstream and think
rescue
Downstream view of measurement section, Clark Fork, near Gold Cr., MT
![Page 45: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/45.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety - Rescue • Throw bags contain a line that can be thrown to colleagues who need help.
• See Mississippi report on use of multi-person field trips
![Page 46: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/46.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Wading Safely
• When wading, proceed carefully
• Use wading rod to probe bottom ahead of you
![Page 47: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/47.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Wading Safely (cont.)
• Wade carefully and think about hazards downstream
•How would you execute a self-rescue at this site?•Have a plan before you begin
![Page 48: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/48.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety – Conditions Around You
Be aware of potentially dangerous conditions upstream and downstream• Ice• Debris• Dam Releases• Boats
Snake River near Moran, WY
![Page 49: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/49.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety – Measuring Width
Laser distance meter
• Use laser distance meter, rather than a tag line, to measure channel width and distances when boat traffic is possible
![Page 50: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/50.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety - Traction• Use of felt soles or metal cleats on the
bottom of your waders can significantly improve traction.
• Be careful, felt bottoms can become slick if algae is present.
![Page 51: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/51.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety - Waders
• Belts can prevent waders from rapidly filling with water, if you fall below the water level.
Belt
![Page 52: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/52.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Safety--In-Pool Training
![Page 53: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/53.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Measurement Notes9-275-F UNITED STATES Meas. No…………(Rev. 10-81) DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY Comp. by………….
WATER RESOURCES DIVISION
Sta. No………………….. DISCHARGE MEASUREMENT NOTES Checked by………………………………………………………………………………………………………………………Date…………….., 19…………………… Party……………………………………………………………Width……………. Area………………… Vel………… G.H………………… Disch……………………Method……….. No. secs…………….. G.H. change………… in ………..hrs. Susp…………….Method coef……….. Hor. Angle coef…………… Susp. Coef…………………. Meter No…………Type of meter……………. Date rated …………………………. Tag checked …………………………..Meter …………. Ft. above bottom of wt. Spin before meas…………….. after …………………………Meas. Plots……….. % diff. From ……….. rating. Levels obtained …………………………………..
Gage Readings Water Quality MeasurementsTime Inside ADR Graphic Outside No……….. Yes………. Time ……….……………………………………………………….……. Samples Collected……………………………………………………..……. No………. Yes……….. Time………………………………………………………………..…… Method Used………………………………………………………….. EDI……… EWI………. Other………..……………………………………………………. …… SEDIMENT SAMPLE………………………………………………………….. No………… Yes……… Time……....………………………………………………………….. Method Used EDI……….. EWI……… Other……….Weighted M.G.H. ………………………………… BIOLOGICAL SAMPLESG. H. Correction ………………………………….. Yes………………….. Time……………….Correct M.G.H. …………………………………. No…………….……. Type………………
Check bar chain found……………………………….. changed to …………………… at ……………..
![Page 54: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/54.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Measurement Notes -Example
• The process of filling out measurement note sheets will be examined by following a measurement made on the North Fork Blackfoot River on September 13, 1999
Upstream view, North Fork, Blackfoot River
Gage House
![Page 55: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/55.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
N. Fk. Blackfoot River
Downstream View Upstream View
![Page 56: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/56.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Gage House
![Page 57: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/57.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Starting the MeasurementN. Fork Blackfoot River
• Discussion of measurement
• Overview of gage site
![Page 58: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/58.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Selecting Measuring Section
![Page 59: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/59.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Measuring Section
Downstream view showing control riffle
![Page 60: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/60.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Stringing Tagline
![Page 61: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/61.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Meter and Rod Setup
![Page 62: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/62.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Meter and Rod Setup (cont.)
![Page 63: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/63.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Determining Subsection Spacing
• Remember, try to have no more than 5% of flow in any one subsection
![Page 64: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/64.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Assessing Subsection Spacing
• Can keep track of sectioning by using rating to estimate what discharge will be.
![Page 65: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/65.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Assessing Subsection Spacing (cont.)
• Try to monitor flow in each section as you proceed.
• It is most important to monitor flow in the deepest/fastest subsections to judge compliance to the 5% rule.
![Page 66: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/66.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Starting the Measurement – The Second Subsection
![Page 67: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/67.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Job Hazard Analysis
Job Hazard Analysis for North Fork Blackfoot River Site
![Page 68: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/68.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Front Sheet
Summarizes: 1. Measurement
results2. Gage operation3. Channel conditions4. Evidence of high-
water5. Water Samples
taken during visit
9-275-F UNITED STATES Meas. No…………(Rev. 10-81) DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY Comp. by………….
WATER RESOURCES DIVISION
Sta. No ………….……. DISCHARGE MEASUREMENT NOTES Checked by…………………………………..…………………………………………………………………………….……Date……….. ……………… Party……………..………………………………….. ……..………………Width……..…. Area……..……… Vel……….G.H……………………….…… Disch…….……………Method………….. No. secs…..…….... G.H. change…..…. in …...…..hrs. Susp. .………..……Method coef……….. Hor. Angle coef…………… Susp. Coef…………………. Meter No………..Type of meter……………. Date rated …………………………. Tag checked …………………………..Meter …………. Ft. above bottom of wt. Spin before meas…………….. after …………………………Meas. Plots……….. % diff. From ……….. rating. Levels obtained …………………………………..
Gage Readings Water Quality MeasurementsTime Inside ADR Graphic Outside No……….. Yes………. Time ……….……………………………………………………….……. Samples Collected……………………………………………………..……. No………. Yes……….. Time………………………………………………………………..…… Method Used………………………………………………………….. EDI……… EWI………. Other………..……………………………………………………. …… SEDIMENT SAMPLE………………………………………………………….. No………… Yes……… Time……....………………………………………………………….. Method Used EDI……….. EWI……… Other……….Weighted M.G.H. ………………………………… BIOLOGICAL SAMPLESG. H. Correction ………………………………….. Yes………………….. Time……………….Correct M.G.H. …………………………………. No…………….……. Type………………
Check bar chain found……………………………….. changed to …………………… at ……………..Wading, cable, ice, boat, upstr., downstrn., side bridge……………. Feet, mile, above, below gage.Measurement rated exellent (2%), good (5%), fair (8%), poor (over 8%); based on the following cond.Flow……………………………………………………………………………………………………….Cross section………………………………………………………………………………………………Control…………………………………………………………………………………………………….Gage operating………………………………………… Weather………………………………………..Intake/Orifice cleaned…………… Air……………..oC@……….. Water……………oC@…………….Record removed……………… Extreme Indicator: Max………………… Min…………………………Manometer N2 Presure Tank……………… Feed………… Bbl rate………………………….. per min.CSG checked………………………………….. Stick reading……………………………………………Observer……………………………………………………………………………………………………HWM……………………………………………………………………. outside, in wellRemarks…………………………………………………………………………………………………….………………………………………………………………………………………………………………………………………………………………………………………………………………………………G.H. of zero flow………………… ft. Sheet No…………………… of ………………….. sheets
![Page 69: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/69.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
9-275-F UNITED STATES Meas. No…37……(Rev. 10-81) DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY Comp. by…RRS…. WATER RESOURCES DIVISION
Sta. No…12338300 DISHARGE MEASUREMENT NOTES Checked by.Q ck……N.F. Blackfoot R. ab. Dry Gulch nr. Ovando, MT…………........................................………………Date…09/13….., 1999…………………… Party…Shields (m/n), M. Nolan, K. Thompson…………..…Width…110……. Area…139…………… Vel…1.47… G.H…2.79………… Disch…205……...………Method…0.6….. No. secs…29 ……….. G.H. change…0…… in …1…..hrs. Susp…Rod…...….Method coef…---….. Hor. Angle coef…---……… Susp. Coef……---…………... Meter No…272409…Type of meter…AA-Mag. Date rated …July 1999…………. Tag checked ………N/A………....………..Meter …-----…. Ft. above bottom of wt. Spin before meas…4' 30"…….. after ……O.K.…….…………Meas. Plots…-16….. % diff. From …Rt. #1….. rating. Levels obtained ……No………………………..
Summary Information - Blackfoot Measurement
![Page 70: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/70.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Gage equipment 1
Gage Readings Water Quality MeasurementsTime Inside DCP Graphic Outside No…x….. Yes………. Time ……….…1130……........……2.79……2.79……2.79......2.78 +/-.02 Samples Collected……………………………………………………..…..…. No…x…... Yes……….. Time…………1200…………………………2.79………………..….….. Method Used1230…………………………2.79……………………..... EDI……… EWI………. Other………..……………………………………………………. …… .. SEDIMENT SAMPLE1245………………2.79………………2.79….2.78 +/-.02 No…x…… Yes……… Time……....………………………………………………………….. .. Method Used EDI……….. EWI……… Other……….Weighted M.G.H. … 2.79………………...........…………... BIOLOGICAL SAMPLESG. H. Correction ……………………….......………….. ... Yes………………….. Time…………….Correct M.G.H. ………………………........………….... No………x……..…. Type……………
Check bar chain found…………N/A………………….. changed to …………………… at ……………..Wading, cable, ice, boat, upstr., downstrn., side bridge…100……. Feet, mile, above, below gage.Measurement rated excellent (2%), good (5%), fair (8%), poor (over 8%); based on the following cond.Flow……Steady/Uniform……………………………………………………………………………….Cross section………Cobble/Gravel……………………………………………………………………Control……Riffle - 250 ft. below gage/ No algae or debris………………….……………………….Gage operating………Yes……………………………… Weather…Clear……………………………..Intake/Orifice cleaned…O.K.…… Air…20………..oC@…1130.. Water…10.8……oC@…1300…….Record removed……………… Extreme Indicator: Max………………… Min…………………………Manometer N2 Presure Tank…N/A……… Feed………… Bbl rate………………………….. per min.CSG checked……N/A……………………….. Stick reading……………………………………………Observer……………………………………………………………………………………………………HWM……………………………………………………………………. outside, in wellRemarks…Documented for training……Used Current Meter Digitizer with standard rating #2………………………………………………………………………………………………………………………………………………………………………………………………………………………………………G.H. of zero flow………………… ft. Sheet No………1…………… of ……2………….. sheets
1Use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government
Summary Information - Blackfoot Measurement (cont.)
![Page 71: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/71.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Inside the note sheet
.0 .10 .20 .30 .40 .50 .60 .70 .75
River at--Anglecoef-ficient
Dist.Frominitialpoint
Width Depth Observationdepth
Revolutions
Time inseconds
VELOCITYAt MeanPoint in vert- ical
Ad-justedforhor.Angleor
Area Discharge .
.0 .10 .20 .30 .40 .50 .60 .70 .75
.80
0.85
.90
.92
.94
.96
.97
.98
.99
1.00
.99
.98
.97
.96
.94
.92
.90
.85
.80
![Page 72: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/72.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Recording Width and Depth
Anglecoef-ficient
Dist.Frominitialpoint
Width Depth Observationdepth
Revolutions
Time inseconds
VELOCITYAt MeanPoint in vert- ical
Ad-justedforhor.Angleor
Area Discharge .
• Distance from initial point - usually measured from left bank
• Depth - usually measured directly using a wading rod.
![Page 73: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/73.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Recording Angle Correction
Anglecoef-ficient
Dist.Frominitialpoint
Width Depth Observationdepth
Revolutions
Time inseconds
VELOCITYAt MeanPoint in vert- ical
Ad-justedforhor.Angleor
Area Discharge .
• Angle coefficient- correction applied if flow is not perpendicular to the cross section
• Needed because we must determine flow normal to the stream cross section.
• Angle of the current can be assessed by observing floating particles in the water
• Correction can be determined using measurement note sheet as guide (see next slide)
![Page 74: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/74.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Determining a horizontal angle correction
Point of origin Read angle correction here
Tagline or tapeNoteSheet
![Page 75: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/75.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Computing width and depth of individual subsections
• Example of computing sub-section width
• Assume the following measurements applied
• Starting point - 0 feet
• Next point - 1 feet
• Next point - 3 feet
• Next point - 5 feet
0 1 3 5
Meter locations
![Page 76: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/76.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Recording Width
• Width at point 0 = (1 - 0)/2 = 0.5
• Width at point 1 - (3 - 0)/2 = 1.5
• Width at point 3 = (5 - 1)/2 = 2.0
0 1 3 5
1.5
2
Meter locations (ft.)
Widths
0.5
?
![Page 77: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/77.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Recording Width and Depth
0 1 3 5
1.5
2
Meter locations
Widths
0.5
?
Depth, in this example, is zero, therefore no flow
Note: See table from Rantz (1982) for help estimating velocity when edge of water is
vertical.
![Page 78: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/78.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Recording Width and Depth (cont.)
• Data from the North Fork Blackfoot RiverAngle
coef-ficient
Dist.Frominitialpoint
Width Depth Observation depth
REW 1135106 1.0 0 ----104 3.0 0.55 0.6100 5.0 .62
94 5.0 .62
90 5.0 .72
84 5.0 .90
80 4.0 1.20
76 4.0 1.40
72 3.5 1.45
69 3.5 1.60
![Page 79: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/79.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Recording Velocity
Anglecoef-ficient
Dist.Frominitialpoint
Width Depth Observationdepth
Revolutions
Time inseconds
VELOCITYAt MeanPoint in vert- ical
Ad-justedforhor.Angleor
Area Discharge .
• Velocity measured for at least 40 sec.
• Rating table for meter is used to determine velocity “at point”
• Any needed horizontal angle correction is applied to velocity
![Page 80: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/80.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Recording Velocity (cont.)Anglecoef-ficient
Dist.Frominitialpoint
Width Depth Observationdepth
Revolutions
Time inseconds
VELOCITYAt MeanPoint in vert- ical
Ad-justedforhor.Angleor
Area Discharge .
• Velocity measured at a
single point is entered in the “At Point” column
• If velocity is measured at more than one point in the vertical the mean must be computed.
![Page 81: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/81.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Checking Meter Condition
• Condition of meter should be checked periodically to make sure debris is not affecting performance
![Page 82: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/82.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Velocity from Rating Table
See OSW memo 99.05 for the most recent ratings for AA and pygmy meters.
Partial listing of standard rating #2
![Page 83: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/83.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Recording Discharge• Data from North Fork Measurement
Angle coef-ficient
Dist. From initial point
Width
Depth
Observation depth
Revolutions
Time in seconds
VELOCITY At Mean Point in vert- ical
Adjusted for hor. Angle
Area
Discharge .
REW 1135 106 1.0 0 ---- ---- ----- --- ---- --- 0 0 104 3.0 0.55 0.6 19 41 1.04 1.65 1.7 100 5.0 .62 22 41.3 1.19 3.1 3.7 94 5.0 .62 19 40 1.07 3.1 3.3 90 5.0 .72 18 42.3 0.96 3.6 3.4 84 5.0 .90 26 40.7 1.43 4.5 6.4 80 4.0 1.20 29 40.7 1.59 4.8 7.6 76 4.0 1.40 32 40 1.78 5.6 10.0 72 3.5 1.45 34 40.9 1.85 5.08 9.4 69 3.5 1.60 30 40.8 1.64 5.6 9.2 65 3.5 1.56 33 40.3 1.82 5.46 10.0 62 3.5 1.45 34 40.6 1.86 5.08 9.5 58 3.5 1.40 32 40.4 1.76 4.90 8.6 55 3.5 1.55 33 40.6 1.81 5.43 9.8 51 3.5 1.42 32 41 1.74 4.97 8.6 48 3.5 1.50 34 40.9 1.85 5.25 9.7 44 3.5 1.40 36 40 2.00 4.9 9.8 1215 41 3.5 1.40 30 40 1.67 4.9 8.2 37 3.5 1.45 32 40.8 1.75 5.08 8.9
![Page 84: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/84.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
1215 41 3.5 1.40 30 40 1.67 4.9 8.2 37 3.5 1.45 32 40.8 1.75 5.08 8.9 34 3.5 1.45 32 41 1.74 5.08 8.8 30 3.5 1.50 20 40.3 1.55 5.25 8.1 27 3.5 1.58 28 41.1 1.52 5.53 8.4 23 3.5 1.80 28 40.1 1.56 6.3 9.8 20 4.0 1.80 17 41 0.93 7.2 6.7 15 5.0 1.80 21 40.5 1.16 9.0 10.4 10 5.0 1.60 21 40.9 1.15 8.0 9.2 5 5.0 1.10 12 42 0.65 5.5 3.6 1226 0 4.5 1.0 0.6 5 45.2 0.26 4.5 1.8 LEW -4 2.0 0 ----- --- ------ --- ---- ---- 0 0 110 110 139.4 204.6 110 110 139 205
Finalizing Measurement
• Include finish time
Finish time
Total widthTotal of all widths
Total areaTotal discharge
• Sum width, area and discharge
Intermediatetime
![Page 85: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/85.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Finalizing Measurement (cont.)
• Record left edge of water, finish time, etc.
• A check of the discharge computation later revealed a discharge of 205 cubic feet per second
• Illustrates value of checking measurements
![Page 86: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/86.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Finalizing Measurement (cont.)
• Fill in Width, Area, Velocity, Gage height, and Discharge on Front Sheet
• Average velocity is (Discharge / Area)9-275-F UNITED STATES Meas. No…………(Rev. 10-81) DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY Comp. by………….
WATER RESOURCES DIVISION
Sta. No ………….……. DISCHARGE MEASUREMENT NOTES Checked by…………………………………..…………………………………………………………………………….……Date……….. ……………… Party……………..………………………………….. ……..………………Width……..…. Area……..……… Vel……….G.H……………………….…… Disch…….……………Method………….. No. secs…..…….... G.H. change…..…. in …...…..hrs. Susp. .………..……Method coef……….. Hor. Angle coef…………… Susp. Coef…………………. Meter No………..Type of meter……………. Date rated …………………………. Tag checked …………………………..Meter …………. Ft. above bottom of wt. Spin before meas…………….. after …………………………Meas. Plots……….. % diff. From ……….. rating. Levels obtained …………………………………..
![Page 87: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/87.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Finalizing Measurement (cont.)
• Fill in Width, Area, Velocity, Gage height, and Discharge o Front Sheet
• Average velocity is (Discharge / Area)9-275-F UNITED STATES Meas. No…37……(Rev. 10-81) DEPARTMENT OF THE INTERIOR
GEOLOGICAL SURVEY Comp. by…RRS…. WATER RESOURCES DIVISION
Sta. No…12338300 DISHARGE MEASUREMENT NOTES Checked by.Q ck……N.F. Blackfoot R. ab. Dry Gulch nr. Ovando, MT…………........................................………………Date…09/13….., 1999…………………… Party…Shields (m/n), M. Nolan, K. Thompson…………..…Width…110……. Area…139…………… Vel…1.47… G.H…2.79………… Disch…205……...………Method…0.6….. No. secs…29 ……….. G.H. change…0…… in …1…..hrs. Susp…Rod…...….Method coef…---….. Hor. Angle coef…---……… Susp. Coef……---…………... Meter No…272409…Type of meter…AA-Mag. Date rated …July 1999…………. Tag checked ………N/A………....………..Meter …-----…. Ft. above bottom of wt. Spin before meas…4' 30"…….. after ……O.K.…….…………Meas. Plots…-16….. % diff. From …Rt. #1….. rating. Levels obtained ……No………………………..
![Page 88: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/88.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Finalizing Measurement (cont.)• Read gage
• Record times and gage heights recorded during measurement on front sheet.
Gage Readings Water Quality Measurements Time Inside DCP Graphic Outside No…x….. Yes………. Time ……….… 1130……........……2.79……2.79……2.79......2.78 +/-.02 Samples Collected 1135 ...(s) …….... (2.79) …………………………..…..…. No…x…... Yes……….. Time………… 1200………………………….........………………..….….. Method Used 1226....(e)..………(2.79) .……………………………..... EDI……… EWI………. Other……….. 1230…………………………2.79………………. …… .. SEDIMENT SAMPLE 1245………………2.79………………2.79….2.78 +/-.02 No…x…… Yes……… Time…….... ………………………………………………………….. .. Method Used EDI……….. EWI……… Other………. Weighted M.G.H. … 2.79………………...........…………... BIOLOGICAL SAMPLES G. H. Correction ……………………….......………….. ... Yes………………….. Time……………. Correct M.G.H. ………………………........………….... No………x……..…. Type……………
![Page 89: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/89.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Determining Mean Gage Height
• Compute mean gage height for measurement, if needed
• Mean gage height should be computed if change in stage is greater than 0.15 feet or if change in stage has not been uniform during measurement
• Weighting can be done using either partial discharge or time as the weighting factor
• See Discharge Measurements, Part 2 in training class SW4230 for a description of how weighting should be done.
![Page 90: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/90.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Measurements During Rapidly Changing Stage
• Weighted mean gage height is not truly applicable when stage is changing rapidly
• You can reduce measurement time using the following procedures in the order listed:1. Use only the 0.6-depth method2. Reduce velocity-observation time to about 20-30 seconds3. Reduce the number of subsections to 15 – 18
• Using any of the shortcuts listed above will reduce measurement accuracy• See further discussion in SW4230
![Page 91: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/91.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Finalizing Measurement (cont.)
Check bar chain found……………………………….. changed to …………………… at ……………..Wading, cable, ice, boat, upstr., downstrn., side bridge……………. Feet, mile, above, below gage.Measurement rated exellent (2%), good (5%), fair (8%), poor (over 8%); based on the following cond.Flow……………………………………………………………………………………………………….Cross section………………………………………………………………………………………………Control…………………………………………………………………………………………………….Gage operating………………………………………… Weather………………………………………..Intake/Orifice cleaned…………… Air……………..oC@……….. Water……………oC@…………….Record removed……………… Extreme Indicator: Max………………… Min…………………………Manometer N2 Presure Tank……………… Feed………… Bbl rate………………………….. per min.
Downstream view through Blackfoot measuring reach
![Page 92: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/92.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Assessing Measurement
• Assessing accuracy of measurement
• Semi-quantitative based upon:
1. Cross section uniformity
2. Velocity uniformity
3. Stream bed conditions
4. Etc.
See “Determination of Error in Individual Discharge Measurements” by Sauer and Meyer announced in OSW memo 93.14
Blackfoot measuring section
![Page 93: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/93.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Assessing Measurement (cont.)
MeasurementRating
Percent off from truedischarge
Excellent Within 2
Good Within 5
Fair Within 8
Poor Greater than 8
![Page 94: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/94.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Finalizing Measurement -- The Control
• Very important – Observations of control forms basis for developing shifts to ratings
• The control that is in effect during the measurement must be identified
ChannelControl
RiffleSection Control
ChannelControl
Water Surface
Stream Bottom
![Page 95: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/95.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Finalizing Measurement -- The Control (cont.)
Section Control Section Control drowning out-- Channel becoming control
![Page 96: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/96.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Check bar chain found…………N/A………………….. changed to …………………… at ……………..Wading, cable, ice, boat, upstr., downstrn., side bridge…100……. Feet, mile, above, below gage.Measurement rated excellent (2%), good (5%), fair (8%), poor (over 8%); based on the following cond.Flow……Steady/Uniform……………………………………………………………………………….Cross section………Cobble/Gravel……………………………………………………………………Control……Riffle - 250 ft. below gage/ No algae or debris………………….……………………….
Finalizing Measurement – Describing channel conditions
![Page 97: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/97.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Finalizing measurement - Point of Zero Flow
• Point of zero flow (also called Gage Height of zero flow)• Useful in developing stage-discharge relation (rating)
• First approximation for scale offset• Can be used as another point on the rating
• Represented by the lowest (deepest) point on section control
Record removed……………… Extreme Indicator: Max………………… Min…………………………Manometer N2 Presure Tank……………… Feed………… Bbl rate………………………….. per min.CSG checked………………………………….. Stick reading……………………………………………Observer……………………………………………………………………………………………………HWM……………………………………………………………………. outside, in wellRemarks…………………………………………………………………………………………………….………………………………………………………………………………………………………………………………………………………………………………………………………………………………G.H. of zero flow………………… ft. Sheet No…………………… of ………………….. sheets
![Page 98: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/98.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Point of Zero Flow (cont.)
Gage Pool
Include Velocity Head
Deepest Point on Control
Control Section Perpendicular to Flow
Control Section
Gage Pool
Flow
![Page 99: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/99.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Point of Zero Flow (cont.)
North Fork Blackfoot River
![Page 100: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/100.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Point of Zero Flow (cont.)
Another example
![Page 101: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/101.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
High Water Marks
• Look for high-water marks
• Important aid in working streamflow record
• Allow you to verify peak stages recorded between visits to site
Record removed……………… Extreme Indicator: Max………………… Min…………………………Manometer N2 Presure Tank……………… Feed………… Bbl rate………………………….. per min.CSG checked………………………………….. Stick reading……………………………………………Observer……………………………………………………………………………………………………HWM……………………………………………………………………. outside, in wellRemarks…………………………………………………………………………………………………….………………………………………………………………………………………………………………………………………………………………………………………………………………………………G.H. of zero flow………………… ft. Sheet No…………………… of ………………….. sheets
High-water marks on North Fork staff gage
![Page 102: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/102.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Measurement and the Stage-Discharge Relation
• Compute how far measurement plots from rating and plot on rating
Sta. No…12338300 DISHARGE MEASUREMENT NOTES Checked by.Q ck……N.F. Blackfoot R. ab. Dry Gulch nr. Ovando, MT…………........................................………………Date…09/13….., 1999…………………… Party…Shields (m/n), M. Nolan, K. Thompson…………..…Width…110……. Area…139…………… Vel…1.47… G.H…2.79………… Disch…205……...………Method…0.6….. No. secs…29 ……….. G.H. change…0…… in …1…..hrs. Susp…Rod…...….Method coef…---….. Hor. Angle coef…---……… Susp. Coef……---…………... Meter No…272409…Type of meter…AA-Mag. Date rated …July 1999…………. Tag checked ………N/A………....………..Meter …-----…. Ft. above bottom of wt. Spin before meas…4"30"…….. after ……O.K.…….…………Meas. Plots…-16….. % diff. From …Rt. #1….. rating. Levels obtained ……No………………………..
![Page 103: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/103.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Test • Click on image on the left to start Excel file containing the test.
• You will have to allow Excel the use of macros for the test to function properly
• You should open the Excel file as “read only”.
• You can install the Excel Viewer, if you do not have Excel on your computer
• Clicking here will start installation
![Page 104: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/104.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Wading Discharge Measurements Using the Mid-Section Method
ByK. Michael Nolan and Ronald R. Shields
Listed as Training Class SW1271 with National Training Center of U.S. Geological Survey
QuitView selected referencesAcknowledgements
![Page 105: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/105.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
Selected References• Buchanan, T.J., and Somers, W.P., 1969, Discharge measurements at gaging
stations: USGS Techniques of Water-Resources Investigations, Book 3, Chapter A8, 65 p. (In revision)
• International Organization for Standardization, 1983, Measurement of liquid flow in open channels, Handbook 16, 518 p.
• Nolan, K.M. and others, Surface-water field techniques training class, USGS WRIR 98-4252, (http://wwwrcamnl.wr.usgs.gov/sws/fieldmethods)
• Rantz, S.E., 1982, Measurement and Computation of Streamflow:Volumes I and II, USGS Water Supply Paper 2175, 631 p.
• V.B.Sauer and R.W. Meyer, Determination of Error in Individual Discharge Measurements”, USGS Open-file report 92-144
Quit
![Page 106: How class works](https://reader038.vdocuments.site/reader038/viewer/2022102702/56814348550346895dafc1e0/html5/thumbnails/106.jpg)
AgendaWater Resources Investigations Report 00-4036 Test
AcknowledgementsThe authors would like to thank Glen Hess, Vern Sauer, and Lucky Sultz for their review of preliminary versions of this report. We appreciated the help of Ken Thompson during field work at the North Fork Blackfoot River. Funding for production and distribution of this report was provided by the Safety Committee of the Water Resources Division.
Quit