hot water_hot water. our element

» INSTANTANEOUS WATER HEATERS» WATER BOILERS

» SMALL WATER HEATERS» WALL MOUNTED WATER HEATERS» FREESTANDING DHW CYLINDERS

» HAND DRYERS

HOT WATEROUR ELEMENT

HOT WATER RENEWABLES CENTRAL HEATING

ISSUE 03|2009

20588_018_RZ_GB HB WW_Broschuere1 1 30.01.2009 15:23:14 Uhr0502_RZ_WW_Broschuere_interna.pdf 1 12.02.2009 09:44:27

CONTENTS

Quality is not a matter of chance 03Saving water and energy 04

Our Products

» Instantaneous water heaters 06Fully-electronic instantaneous water heaters 08Electronic instantaneous water heaters 10Hydraulically controlled instantaneous water heaters 13Mini instantaneous water heaters 16Small instantaneous water heaters 17

» Water boilers 18» Small water heaters/Taps 20» Wall mounted water heaters 28» Freestanding DHW cylinders 38» Commercial products 44

Hand dryers 46Automatic water boilers 48Instantaneous water heater cylinders 49

» Technical data, accessories 50


STIEBEL ELTRON has been synonymous with convenient household appliances since 1924.

Today, as back then, we develop products of the highest quality and with advanced

functionality. We combine innovative technology, reliable quality and partner-based

customer service for branded products in the best tradition. Our unconventional

thinking and our practical inventions, which have defined whole markets, have always

been the most important capital in our business. Today, we deploy the same enthusiasm

in the development of optimised solutions for the future as we did when we designed the

products currently on the market. The way we do business today is also characterised

by our unwillingness to rest on our laurels or choose the easy way out. Common to all

products bearing the STIEBEL ELTRON name is our goal of developing, manufacturing and

selling products and advanced systems in the faultless quality the demanding market

requires. We think that only in this way can technical products truly perform to their

optimum capability.

QUALITY IS NOT A MATTER OF CHANCE

Performance as a matter of principle | STIEBEL ELTRON supply com-fortable solutions all around the areas of water heating, renewable energies and central heating. With numerous individual components and complex system solutions, we help to make everyday life that little bit more comfortable. When considering the technology which is the best for you, you should take into account how all of the com-

ponents in your entire living space interact with each other. Whether you choose a single component or a complete system, with our high-quality products we can guarantee that STIEBEL ELTRON technology will always help you to feel more comfortable in your home. This brochure is designed to show you how we apply innovation with real understanding when it comes to domestic hot water systems.

HOT WATER RENEWABLES CENTRAL HEATING

02 | 03


CO2 emissions per annum

Electricity, decentralised

Natural gas, centralised

Heating oil, centralised

kg CO2 per annum

DHW losses per metre pipework

0 1 2 3 4 5

5 metres of pipe

10 metres of pipe

15 metres of pipe

Water (litres)Shorter distances save you money. Local water heating is very economical due to the short pipe run. Based on a copper pipe, 22 mm in diameter.

1.6 l

3.2 l

4.8 l

In terms of CO2 emissions, a local electrical warm water system comes out on top. The above consumption figures are based on a 3-person household | HEA 2007 (Germany)

More effi cient water usage | Today, hot water is largely taken for granted. Tailor-made solutions from STIEBEL ELTRON help you to lower your domestic hot water bills. The amounts of energy required to heat water varies enormously. Individual habits, the conditions in each house, and technical equipment make all the difference.

Even a modern centralised domestic hot water system is ineffective if the hot water has to travel long distances. A large part of the energy is then wasted in the form of dissi-

pated heat. This is especially the case if smaller amounts of water are used frequently. Heating the water directly at the point of use is simply more advantageous.

With electric power against the tide | Energy bills and environmental issues provide stronger reasons than ever to use electric domestic hot water systems. After all, oil and gas prices have recently increased sub-stantially. In this context, electric domestic hot water systems offer a sensible alter-native. The top convenience, extraordinary

quality and high effi ciency of our heaters offer you that little bit more. Discover for yourself, at your own leisure, the best way STIEBEL ELTRON solutions can benefi t you in your home.

The quickest way to save | The high effi -ciencies of gas or oil fi red systems almost always ‘end up in smoke’ due to their long supply lines. This is one of the disadvantages of centralised water heating systems. Even condensing boilers don't offer any scope for making further savings. Quite the opposite: According to experts, rocketing crude oil prices are expected to have a major impact on gas and fuel oil bills. It is also worth comparing systems based on their CO2 emissions. Electric domestic hot water systems also fair much better here than is generally assumed.

SAVING WATER AND ENERGYWITH TOTAL COMMITMENT

874

1,043

1,333

0 200 400 600 800 1000 1200 1400


On balance, greater effi ciency | Frequently, the real level of energy effi ciency is only discovered at the end of the year. Only then do the many cost factors, such as the domestic hot water circulation pump used in centralised systems, appear in the year-end bill. These are seldom marked down as domestic hot water costs. If you also take

into account hidden cost factors, electrical domestic hot water systems often fair better than centralised oil or gas fi red systems. In particular, decentralised electric domestic hot water systems offer even more benefi ts – they are practically maintenance-free and enable you to make simple, consumption-based cost calculations.

Comparison of energy demands

�Heat consumption(1200 kWh/a)

Heat loss

One instantaneous water heater, one small water heater and one small instantaneous water heater to the draw-off point in your home

Electric DHW cylinder, 100 l close to the draw-off point in your home

Central DHW cylinder (oil/gas heating systems) in the cellar with DHW circulation

04 | 05

Basis: Detached house, 3 persons | HEA 2007 (Germany)

1,365

1,660

3,837

0 500 1000 1500 2000 2500 3000 3500 4000 kWh/a


INSTANTANEOUS WATER HEATERS CONVENIENCE THE EASY WAY

An instantaneous water heater can deliver hot water in many different ways. Either

under hydraulic, electronic or fully-electronic control. Whatever solution you

choose – instantaneous water heaters from STIEBEL ELTRON can meet any demand.

Equally suitable for very soft or very hard water areas. One thing all models have

in common: All our instantaneous water heaters are very energy-efficient, offer a

long service life and are extremely convenient.


FULLY-ELECTRONIC INSTANTANEOUS WATER HEATERS 38.5°C 100% COMFORT

The business meeting today put me through an emotional roller coaster. At first, both

parties were really on edge. But finally, when the ice was broken, negotiations started to

roll. When I got home I had to get straight into the shower. The water soothingly massages

my neck – at just the right temperature. Hot water at first, then slightly cooler, and

then hotter once more. All at one touch of a button, just the way I like it. A sensuous

torrent of water runs down my back. I just love this particular shower program. I feel my

shoulders relax. My skin tightens up slightly, and all the stress softly ebbs away. I feel

I've earned this little bit of luxury. After all, today we managed to win a new customer.


08 | 09

Wireless comfort remote control

That quality moment | The DHE electronic comfort unit provides water controlled to the nearest degree. Allow its four functions for good health to pamper you thoroughly. Thanks to its intelligent fully-electronic control, water is always available at exactly the required temperature. On top of that, water and energy savings of up to 30 % can be made*. Any fl uctuations in pressure and temperature are actively compensated.

For maximum user convenience, you also get a hard-wired remote control, or alternatively, a wireless remote control unit. This allows you to control the DHE electronic comfort system from a different room.

Even installation is amazingly convenient: The unit fi ts in everywhere – and it can be mounted over or undersink.

DHE SLi electronic comfort

18 / 21 / 24 kW (selectable), 18 kW, 27 kW

9.2 – 13.8 l/min (subject to model)

Multifunction display

Always the precise temperature required, from + 20 °C to + 60 °C

The display shows the current water and energy consumption

Economy function ECO, fl ow rate display

Four shower programs for good health

Child-proof system

Electronic safety system with air detection

Bare-wire heating system with unvented casing

Hoseproof to IP 25

DHE

*Dependent upon pattern of use with regulated instantaneous water heaters.

30%* ENERGY AND WATER

SAVING


Pure pleasure | The DEL electronic LCD shows what it can do: Precise temperature control down to the nearest degree. You only need to turn the rotary selector until the required temperature appears in the LCD display – that’s all. The electronically-controlled in stan-taneous water heater captures the fl ow rate as well as the cold and hot water temperatures accurately and uses these details to regulate the output. It also compensates for wider pressure fl uctuations. The DEL electronic LCD unit maintains your required temperature right up to its performance limit.

Which it continues to do even if something ever goes wrong: The unit can be installed directly in your shower cubicle. The DEL system is hoseproof to IP 25 and also offers not only many economic ad-vantages, but also space-saving installations inside the shower cubicle or above the bath.

INSTANTANEOUS WATER HEATERTEMPERATURE CONTROL WITH FEELING

DEL SLi electronic LCD

18 / 21 / 24 kW (selectable), 18 kW, 27 kW


Temperature LCD

Always the precise temperature required, from + 30 °C to + 60 °C


As option with wireless remote control

For hard and soft water areas

Saves up to 30 % water and energy*

Bare-wire heating system with unvented casing

Hoseproof to IP 25

DEL

Wireless remote control LC-Display

*Dependent upon pattern of use with regulated instantaneous water heaters.


10 | 11

Shower without cold shocks | The DHB-E electronic unit offers all the major comfort settings of any electronically-controlled instan-taneous water heater. The actively-controlled output compensates for pressure fl uctuations in the water supply guaranteeing you a pleasant shower experience. Temperature fl uctuations or waiting “forever” for hot water to materialise are defi nitely a thing of the past. After all, the DHB-E electronic unit consumes up to 30 % less energy and water than hydraulically controlled units, thanks to its modern electronics.

DHB-E SLi electronic

18 / 21 / 24 kW (selectable), 11 kW, 13 kW, 18 kW, 27 kW


Constant temperature up to the output limit, from approx. + 30 °C to + 60 °C



Hoseproof to IP 25

Saves up to 30 % water and energy *

DHB-E *Dependent upon pattern of use with regulated instantaneous water heaters.


Refreshingly frugal | The DHB thermotronic represents and interest-ing entry into the comfort class. It offers the output of an advanced electronic instantaneous water heater at the price of the lower middle segment. Its energy effi ciency and the convenience of always main-taining the pre-selected DHW temperature are amongst its primary benefi ts. Temperature fl uctuations caused by output changes are prevented. As a result, the shower experience will never lead to cold shocks. The DHB thermotronic therefore represents pleasant comfort without extravagance.

Perfectly safe: The unit can be installed directly in the spray range in your shower cubicle. The DHB thermotronic is hoseproof to IP 25, and offers not only economic benefi ts, but also a space-saving installation inside the shower cubicle or above the bath.

DHB STi thermotronic

18 kW, 21 kW, 24 kW, 27 kW (subject to device)

9.2 – 13 l/min (subject to model)

Three-stage temperature pre-selection, approx. + 35, + 45, + 55 °C

Individual temperature adjustment through mixing with cold water

Constant water temperature up to the output limit



Bare-wire heating system

Hoseproof to IP 25

Saves up to 20 % water and energy compared with hydraulically regulated appliances

DHB


12 | 13

HYDRAULIC INSTANTANEOUS WATER HEATERS, EFFICIENCY IN SITU

Convenience as standard | The DHH control is the new hydraulic instantaneous water heater with a shower comfort setting. This allows you, alongside the two performance settings, to adjust the water temperature directly at the unit. The fl ow control levels out most pressure fl uctuations.

Wherever you wish to install your DHH control – below the basin or on the wall at eye-level – the user controls always remain easily and ergonomically within reach. As you would expect, the DHH control is hoseproof, which means you can also install it inside the shower cubicle.

DHH Si control

18 kW, 21 kW, 24 kW, 27 kW (subject to device)


Two-stage temperature and output selection

Shower comfort setting



Hoseproof to IP 25

DHH


HDB Si control

18 kW, 21 kW, 24 kW, 27 kW (subject to model)




Hoseproof to IP 25

Pleasure on tap | The HDB hydraulic instantaneous water heater always fi ts. It is characterised by both its ease of installation and the simplicity with which it can replace an existing unit. Its fl ow rate regulation compensates for some pressure fl uctuations. Where less water is required, its output can be reduced to 50 %.

HDB


All-in-one comfort | In diffi cult locations or where the thermal conductivity of the water is poor, it may be diffi cult to install an instantaneous water heater. Here, the DHF offers a real alternative. This hydraulically-controlled instantaneous water heater with two-stage temperature selection offers maximum performance in the tightest of spaces. The control valve even compensates for most pressure fl uctuations in the water supply, automatically.

DHF C compact control

13.2 kW, 15 kW, 18 kW, 21 kW, 24 kW (subject to model)



Optional installed in the shower area

For soft water areas

Tubular heating element with unvented casing

Compact dimensions

14 | 15

DHF C


MINI INSTANTANEOUS WATER HEATERSTRONG STAND-ALONE PERFORMANCE

Technology as you want it | Their compact size make the DNM and DHM units especially suitable for use under limited space condi-tions, either as a non-pressurised or a pres-sure- tested version. Energy is only consumed when hot water is drawn. This makes these units ideal for draw-off points that are only used occasionally.

Less is more | For example, when it comes to the water supply for your visitors' toilet. Mini instantaneous water heaters combine two benefi ts in one unit. Firstly, the convenience of a de-centralised water supply. This means, that hot water does not need be transported through long supply lines. Secondly, the hot water delivery of the unit is just right for washing your hands.

DNM

For a single draw-off point

3.5 kW, 4.4 kW, 5.7 kW (subject to model)


230 V with connecting cable


For non-pressurised installation withopen taps

Over and undersink installation

DHM

For one or several draw-off points

3.5 kW, 4.4 kW, 5.7 kW (subject to model)


230 V with connecting cable


For pressure-tested installation withpressure-tested taps

Undersink installation

Taps for the DNM | This range of low pressure taps with special spray regulator for an op-timised spray pattern supplements the open vented DNM-Mini instantaneous water heat-ers, thus creating a single perfect unit.

Twin-lever tap MAZ

Single lever mixer tap MAE

Wall mounted tap, oversink MAW

DNM DHM

Mono-lever mixer tap MAE


16 | 17

Compact power | The DHC range of hydraulically controlled pres-surized compact instantaneous water heaters, with metal-sheathed heating elements, is designed for applications, where space is limited. Regardless of whether it is installed in the shower cubicle

or under the sink, the DHC always makes sure that you will geht hot water when you need it. When installed near the point of use, the DHC will supply hot water immediately and in the exact quantity that is required.

DHC DHC U

DHC | DHC U

Hot water at any time Different heating capacities and systems for all applications

Quick and easy to install Over (DHC) and undersink (DHC U) installation

Can be sited anywhere, very compact Low energy consumption

Safety thermal cut-out VDE/GS approved

SMALL INSTANTANEOUS WATER HEATER HOT WATER DIRECTLY FROM THE SOURCE


EBK 5 GEBK 5 GA

WATER BOILERSBRINGING WATER SAFELY TO THE BOIL

small volumes – for a single cup, for example – are safely and cost-effectively brought to the boil. The discmatic® concealed element ensures long-term high-effi ciency. This is due to the element being practically always under water. Water temperatures are variably adjustable, and the unit will switch off automatically once the required temperature has been reached, right up to boiling point.

Kitchens are needed for cooking | Whenever you need boiling water instantly, our water boilers are on hand. They allow this extremely hot liquid to be handled conveniently and without risk, after all, they can generally be operated just like a normal tap. There's no need for all that pouring and repouring when brewing large volumes of tea, for example. And thus you reduce the risk of scalding. But even

EBK 5 GA automatic

5-Liter-Glasbehälter mit Chromarmatur

Kochpunkterfassung und Abschaltautomatik

Stufenlose Temperatureinstellung

discmatic®-Flächenheizsystem

230-V-Anschluss mit Schutzkontaktstecker

EBK 5 GA automatic

5 litre glass container with chrome tap

Boiling point sensor and automatic OFF control

Infi nitely variable temperature selection

discmatic® concealed element system

230 V power lead with earthed plug

EBK 5 G automatic

5 litre glass container with white lever tap




230 V power lead with earthed plug


18 | 19

EBK 5 K

A great recipe | These water boilers are manufactured from a variety of materials such as glass or plastic, and come in a range of attractive designs. Sometimes in classic chrome, sometimes with a modern plastic-coated tap.

EBK 5 K automatic

5 litre plastic container with white lever tap




230 V power cable with earthed plug


SMALL WATER HEATERS HOT WATER WHEN YOU NEED IT

Small water heaters free-up space in the kitchen. Both powerful and compact in design,

these water heaters are an affordable source of hot water. Their cost-effectiveness is

especially apparent when small volumes of water are frequently required. Their innovative

thermostop technology and the highly effective insulation ensure minimum standby

losses. The anti-drip function saves water and reduces limescale build-up on taps and

basins. That helps to keep your sink and basin clean.


A REAL HELP IN KITCHEN AND BATHROOM

Whoever said it's just a children's birthday party should come over and take a look!

Pandemonium! Thankfully we are well stocked-up. Hot water is also always available.

Before, it used to take ages, but now, simply turn on the tap and the water is hot, right

from the first drop. This water heater always has warm or hot water in supply and refills

automatically. What a red hot idea! I wish the fridge could chill things as quickly.


22 | 23

Small – but powerful | The small water heater, SNU 5 SLi dripstop comfort, convinces in many ways. The temperature inside the device can be infi nitely selected between + 35 °C and + 82 °C, enabling water of the same temperature to be drawn off at any time. The optional temperature limits, that can be set to +38, +45, +55 or +65 °C, act as anti-scalding protection or can be utilised as economy steps.

Easy operation | The exclusive mono-lever tap with retractable rinser head makes washing larger objects in your sink that much easier. The water volume and temperature can be easily adjusted with just one hand. In the form of the elegant bathroom version, the exclusive basin tap and small water heater create an ideal combination. Not only that, but one hand always remains free.

SNU 5 SLi dripstop comfort | SNU 10 SLi comfort

dripstop prevents dripping during heat-up, saves water and reduces limescale build-up on the tap (SNU 5 SLi)

thermostop to prevent radiation losses when using mixer taps, saves up to € 30 per year

5 or 10 litre undersink water heater with 2 kW or 1 kW (subject to model)

Only 0.2 kWh standby loss per day (SNU 5 SLi)

Active protection circuit for a safety installation

For a single draw-off point


Splashproof to IP 24 D

» dripstop | Prevents dripping during heat-up, saves water, reduces lime-scale build-up on taps, sink and basin.

» thermostop | Saves energy and prevents mixer taps from being heated in stand-by mode.

SNU

The MESB kitchen tap with its retractable rinser head makes it easy to wash larger objects.

Everything under control: SNU with mono-lever mixer tap MEW.


Perfect control | For assembly above the draw-off point, we recommend the SN or SH series of small water heaters, subject to whether you need to supply one or more draw-off points. These heaters are avai-lable with a capacity of 5 to 15 litres. The temperature can be infi nite-ly selected between + 35 °C and + 82 °C / + 85 °C, which means that water of that temperature is always on tap. The thermal cut-out provides a permanent, safety-fi rst maximum water temperature. This

can be set to +38, +45, +55 or +65 °C. The highly effi cient insulation of these small water heater provides perfect thermal insulation at the lowest possible energy loss. With the MEK series of taps, the SN small water heaters make a winning team. The mono-lever mixer tap and swivel spout are very easy to use. This tap gives you the perfect handle on the open small water heater in your kitchen.

SN 5, 10, 15 SLi comfort | SH 10, 15 SLi comfort

SN: Open water heater with 5, 10, 15 litre capacity (subject to model)

SH: Sealed water heater with 10/15 litre capacity (subject to model)

2.0 – 3.3 kW (subject to model)


Low stand-by consumption


+ 60 °C economy setting

SMALL WATER HEATERSALL-IN-ONE COMFORT

SN SN with MEK kitchen tap


24 | 25

Heat on tap | The SHU series of small water heaters with 5 or 10 litres capacity is ideal for supplying multiple draw-off points. The rotary selector enables the temperature to be selected at the unit between + 35 °C and + 82 °C. The thermal cut-out provides a permanent, safety-fi rst maximum water temperature. This can be set to +38, +45, +55 or +65 °C. An indicator illuminates whenever the unit is in the heat-up phase. Regardless of which mode the small water heater is currently in, it will always generate the required water temperature on a continuous basis.

SHU 5, 10 SLi comfort

Water heater with 5/10 litre capacity (subject to model)

2.0 kW


Stand-by consumption loss 0.31 / 0.36 kWh per day (subject to model)

Temperature setting at the unit: + 35 °C to + 82 °C


Active protection circuit for safety-fi rst installation (the high limit safety cut-out can be reset)

Economy setting + 60 °C

SHU

The temperature can be variably adjusted and eco-mode selected in no time at all.


Gourmet kitchen | The UFP range of small water heaters are a real hit, offering strong performance in tight spaces. Wherever small amounts of hot water are required, these open water heaters supply a single draw-off point with running hot water. The infi nitely adjustable rotary selector enables a temperature selection between + 35 °C and + 85 °C at the unit. This small water heater provides around twice its capacity of warm mixed water at + 40 °C when heated to + 65 °C.

Heater and tap from a single source | The WST-K tap and small water heater form a perfect unit. Its timelessly elegant design is an optimum fi t for the open small water heater. Its convenient tempera-ture control system and high fl ow rate make it an ideal accessory for your kitchen sink.

UFP 5 t

thermostop to prevent radiation losseswhen using mixer taps in standby mode

5 litre small water heater (open) | 2.0 kW / 230 V

Stand-by consumption loss 0.23 kWh per day


Also available as an oversink version (type UFP 5 h)

UFP with WSTK kitchen tap

UFP


26 | 27

PSH 15 Mini ID

PSH 15 Mini ID

Modern design

Easy to install

Long-term reliability

Temperature setting at the unit: + 35 °C to + 80 °C

220–230 V with electonic cord

The happy medium | Where a small cylinder is too little and a large one is too much the PSH 15 Mini ID fi lls the gap. With its variable temperature selection between + 35 and + 80 °C it is the ideal choice for bathrooms and kitchens, so that water can always be drawn at a constant temperature.

DHW CONVENIENCE IN GOOD SUPPLY

CoPro, the highest standard in corrosion pro-

tection | The PSH 15 Mini ID are manufactured from steel with a special glass coating on one side. A highly effective reactive magnesium anode ensures additional protection against corrosion. this combination is what guarantees a long service life for the water heater.


WALL MOUNTED WATER HEATERSLUXURIATE IN COSY WARMTH

Wherever large volumes of hot water are required, STIEBEL ELTRON water heaters are

on hand with the required volume. With capacities ranging from 30 to 150 litres highly

efficient thermal insulation and reliable technology, these cylinders constantly ensure

the desired quality of hot water in the bathroom, for small and very large volumes

alike. These wall mounted water heaters are a real hit thanks to their optimum levels of

efficiency and flexibility, not forgetting the option of running them in open or sealed

systems. These water heaters also leave no question unanswered when it comes to a

long service life, thanks to their top quality materials, processing technology, special

"anticor" enamel finish and active anti-corrosion protection.


A BATH FOR TWO

At last, it's the weekend. First, do a few chores, then we can take a wonderful bath together.

Today we really need some relaxation. Thankfully now, hot water doesn't travel as far

as it used to. It used to take ages. But these days, the tub fills up amazingly quickly.

I couldn't resist jumping in. It's so wonderfully warm and relaxing. All that stress dissolves

in the hot water and gradually ebbs away. Soon we'll feel refreshed and ready for the

rest of the evening. Maybe then we can find something else to do that is spontaneous

and fun!


30 | 31

Comfort on demand | The SHZ series of wall mounted water heat ers deliver hot water constantly to your home. These cylinders are available in six different sizes, between 30 and 150 litres. They all have a keypad on the digital user interface that allows you to set the temperature accurately, to the nearest degree.

The integral LCD display indicates precisely how much hot water is available. And more: The LCD display shows you all of the informa -tion you need – from energy use, to the temperature currently programmed, up to diverse data concerning the current operating status.

The SHZ series of wall mounted water heaters can be installed in open systems for single draw-off points, or in sealed systems with multiple draw-off points. The SHZ series allows you to use cost-effective off-peak rates in combination with daytime tariffs.

SHZ 30–150 LCD electronic comfort

Wall mounted water heater with 30, 50, 80, 100, 120and 150 litre (subject to model)

1.0 – 6.0 kW (subject to device and connection type)

Two heating circuits for heating up during the day and night

Rapid heat-up pushbutton

Stand-by consumption loss 0.45 – 1.05 kWh per day (subject to model)

Precise temperature control to the nearest degree

Heat content display, in litres of mixed water

For open and sealed systems

Automatic scaling indicator

Impressed current anode

Well informed: The display keeps the user post-ed on the selected temperature and operational status.

SHZ LCD


Combining convenience with effi ciency | The HFA-Z is a wall mounted water heater with a world of possibilities. A very special option is also available if it is connected as an open, non-pressurised cylinder. Not only can the HFA-Z be used as a regular wall mounted water heater, it can also be operated with a single heat-up option. In the latter operating mode, the cylinder content is heated once to a programmed temperature of your choice, i.e. up to a maximum of + 82 °C. In this mode, the heat-up is activated manually via a pushbutton.

The fi ne adjustment selector allows you to infi nitely vary the temperature at the unit itself. The special enamel coating and highly effective protective magnesium anode guarantee a long service life. This wall mounted water heater can be operated both in open and closed systems, and is available with a capacity of 30, 80, 100 or 150 litres.

IDEAS ON THE WALL

HFA-Z 30–150 universal

Wall mounted water heaters with 30, 80, 100, 150 litre (subject to model)


Two heating circuits for heating up during the day and night

Optional use of off-peak tariffs

Pushbutton for rapid heating

Stand-by consumption loss 0.5 –1.2 kWh per day (subject to model)

Variable temperature selection

For open and sealed system

Single heat-up option

HFA-Z

With the rapid heat-up facility and variable ther-mostat, temperature is simply a matter of control.


32 | 33

Open to both | The SH 30–150 S electronic series can deliver high levels of domestic hot water convenience to your home. They can be installed either as open systems for a single draw-off point or in sealed systems for multiple draw-off points. The units feature a continuously variable temperature setting. The rotary selector can also be used to set a temperature limit at + 45/+ 55 and + 65 °C.

SH 30 – 150 S electronic

Wall mounted water heaters with 30, 50, 80, 100, 120and 150 litre (subject to model)


One circuit for continuous or off-peak water heating


LED user interface

Electronic heat content display


Signal anode

With the variable temperature control you can also see the programmed heat usage.

SH S


Comfort on the wall | The SH A series of wall mounted SHW cylinders supplies suffi cient hot water to any desired place in your home. The detailed thermostat shows the exact hot water temperature at any time. The good qualities in terms of longevity are inherited from its big brother, the SH.

MORE STORAGE

SH A

Wall mounted storage water heaters with 30, 50, 80, 100, 120 and 150 litre (subject to model)


One circuit for continuous or off-peak water heating

Heat content display


Signal anode

SH A

The temperature can be variably adjusted at the unit itself.


34 | 35

A complete design | The PSH TM series of wall mounted storage water heaters, ranging in size from 30 to 200 litres, are designed to supply multiple draw-off points. The PSH TM is the hot water spring for your bathroom. It heats the cylinder content up to + 70 °C. For this, an infi nitely variable rotary selector enables the precise temperature adjustment at the device. Equipped with a protection anode and timeless design the stage is set for a long life time.

PSH TM

2 kW (subject to model and connection type)

Temperature settings + 35 °C to + 70 °C

Operation signal lamp

Protection anode

PSH TM


Always in the loop | The wall mounted water heater PSH ID offers impressively high levels of convenience and output. With its variable temperature selection it heats hot water to up to + 70 °C. The inte-grated temperature curve display keeps you constantly in the loop about the current status. With the specially enamelled cylinder and protective anode, the PSH ID is remarkably well equipped to last and happily serve your needs.

Convenient even during installation | The universal wall mount uses previous screw anchor holes for both old appliances and those of other manufacturers, ensuring that no additional holes have to be drilled.

PSH ID

30 – 200 litre

0,9 –1,8 kW (subject to model and connection type)



Protection anode

Thermometer with temperature progress display

Safety valve with back-fl ow prevention

Universal wall mounting frame

Convenient installation, thanks to the universal wall mounting frame.

PSH ID


36 | 37

Fast track to convenience | When preparing DHW the PSH comfort reduces the process at the push of a button. With the rapid heat-up facility, the unit reaches the required temperature within a short time and then automatically switches back to standard mode. The wall mounted water heater, with capacities ranging from 30 to 150 litres, delivers large volumes of mixed water in the shortest possible time.

PSH comfort

2 kW + 1 kW (subject to model and connection type)


Power switch button for quick heat-up


Protection anode

PSH comfort


FREESTANDING DHW CYLINDERS A WEALTH OF WARMTH

The large DHW cylinders from STIEBEL ELTRON can satisfy the water needs of the entire

household with ease. The highly effective insulation enables an efficient operation,

especially when using cheaper off-peak tariffs. Innovative corrosion protection combined

with minimum maintenance ensure this cylinder can be in continuous and trouble-free

use for many years. The wide range of advanced freestanding DHW cylinders even offers

a multitude of possible combinations with central heating systems, solar heating

systems and heat pumps.


ENOUGH FOR EVERYONE

Wow – that was good! I think it's great when we all do something together. Even if, later

on, it's a bit topsy-turvy at home. Though everything's just fine in the bathroom. No more

queuing in our house. We can have a bath or a shower at the same time; there's plenty

of hot water to go round. It's a real competition: Whoever finishes last, cleans the bath!


40 | 41

Impressive when it comes to quality, too | The SHW series of free-standing DHW cylinders with 200, 300 and 400 litres capacity offer enough backup to heat a whole house.

The sealed DHW heater is made of steel with a special enamel coating on the inside. Additional corrosion protection is provided by an anti-corrosion rod with signal indicator element.

This makes the SHW ideal for multiple draw-off points. The cylinder is supplied as standard with a thermometer, signal anode and variable cold water inlet. Its temperature is infi nitely variable.

Its highly effective insulation keeps heat dissipation to a minimum. With the option of operating the cylinder with the less expensive off-peak current, the SHW series of freestanding DHW cylinders are also ideal as central and economic domestic hot water solutions for domestic households and commercial use alike. All freestanding DHW cylinders are easy to retrofi t during renovation work.

SHW 200 – 400 S

Cylinder with 200, 300, 400 litre (subject to model)

2.0 – 6.0 kW universal immersion heater (subject to device and connection type)

Rapid heat-up button


Optional cost-effective off-peak operation

Infi nitely variable temperature control, approx. + 35 °C to + 82 °C

Copper immersion heater elements can be replaced individually

Signal anode

SHW S


SBS W

Two in one | More and more households are putting their faith in renewables to cover their heating demand. Freestanding cylinders SBS 800 to 1500 W from STIEBEL ELTRON can act as an important link. They enable operation with several energy sources. They are buffer and instantaneous water cylinder (in conjunction with a source for DHW heating) in one. The highly effective internal indirect coil improves hygiene, since only a small amount of DHW needs to be kept hot to supply the entire house with hot water. Supported by environmentally friendly solar energy: The additional internal indirect solar coil inside the cylinder (SBS W SOL) allows an additional re-newable source of energy to be integrated into the system. Conse-quently, this comb cylinder turns into a genuine power pack in your utility room.

The cylinder is made from steel with an internal corrugated stainless steel heat exchanger, and can be fi tted as option with highly-effective insulation for optimum energy effi ciency.

SBS 800 – 1500 W

Cylinder with 600 to 1,500 litre (subject to device)

DHW heating and buffer cylinder in one

Hygienic DHW heating in the corrugated stainless steel heat exchanger (instantaneous water heater mode)

Heat pump operation, may be combined with solar (SBS W SOL), additional heat sources and threaded immersion heaters (BGC)

Highly effective insulation

WELL SUPPLIEDFROM A STANDING START


SHW ACE

42 | 43

Generously supplied | The sealed freestanding SHW ACE DHW cylinder can hold 200, 300 or 400 litres of domestic hot water. The cylinder is sized for any number of draw-off points. An anti-corrosion rod protects the inside against corrosion. The cylinder is made of steel with a special enamel coating on the inside and is fi tted with highly effective insulation for optimum energy effi ciency.

SHW ACE 200 – 400

Cylinder with 200, 300, 400 litre (subject to model)

2 – 4 kW/230 V

2 – 6 kW/400 V

Infi nitely variable temperature control, approx. + 35 °C to + 82 °C


COMMERCIAL USE IDEAL FOR ANY BUSINESS

Equipment needs to perform quite differently when catering for many people. This is

due to higher volume demands, time constraints and sometimes also a lack of available

space. Our products for commercial use are perfectly matched to such conditions.

Reliable technology and robust construction, that can even withstand the most arduous

continuous use, are further proof of the special quality of all products made by

STIEBEL ELTRON.


HTE 5HTE 4

HAND DRYERSHYGIENE IN THE AIR

How work evaporates into thin air | The hand dryer remains the most hygienic and most economical solution for drying your hands in a washroom. You neither need to supply and wash towels nor constantly refi ll and dispose of paper towels. If required, additional fragrance sticks can even provide a fresh ambience in bathrooms and toilets. When you chose this dryer you will not only have decided upon a very hygienic alternative, but you will also save a great deal of time and money for your business. One hand is always washing and drying the other, so to speak. The HTE electronic is a real hit, not least because of its extraordinarily quiet operation. An intelligent IR proximity sensor switches the unit ON, when you hold your hands 6 to 12 cm under the air outlet. It also provides the OFF control, when you remove your hands again. The robust casing protects the delicate technical interior against damage. As does the design, as this prevents objects, such as cigarette butts, from being deposited on the casing.

HTE 4, HTE 5 electronic

1800 W connected load

HTE 4 with casing made from shock-resistant plastic

HTE 5 with a diecast aluminium casing

Air fl ow rate 146 m3/h

220 – 240 V

Operating noise 54 dB(A)

HTE 4 in alpine white

HTE 5 in signal white


HTT AMHTT SM

46 | 47

Dry in a jiffy | The HTT series of hand dryers have the strongest breath. Their enormous air fl ow rate enables them to deliver especially quick drying times. Their powerful output means that they are also one of the fastest, most economical and most hygienic of all hand dryers. Such features make HTT dryers particularly suitable for public toilets and swimming baths with high usage rates. For example, in railway stations, airports or bars/restaurants. All HTT models operate with an electronic IR proximity sensor. This switches the hand dryer ON when your hands are placed between 6 and 12 cm from the air outlet, and OFF again when you remove your hands. The robust casing is made of diecast aluminium with a tough paint fi nish that ensures it retains its hygienic look over its long service life.

HTT 4, HTT 5 turbotronic

2500 W output

HTT 4 with casing made from shock-resistant plastic

HTT 5 with a diecast aluminium casing

Air fl ow rate 250 m3/h

220 – 240 V

Operating noise 68 dB(A)

HTT 4 in alpine white

HTT 5 in signal white, silver-metallic or anthracite-metallic


SHDKA 10KA 5

HOT WATER IN S, M, L AND XXL

For commercial applications | Commercial applications aren't easy on any electric ap-pliance. However, these models are used to hard work. The KA eltroboil series of water boilers with capacities of 5 or 10 litres stand out because of their robustness. They will do their job reliably, particularly in continuous operation. The container is refi lled auto-

matically each time water is drawn. The sys-tem automatically lowers the temperature, if water is not drawn for some time. These heaters are equipped with a condensation chamber which prevents steam release. They are also fi tted with indicators to show when the unit is “ON” or the water is “boiling”.

A rounded performance | The SHD also offers commercial organisations a powerful alter-native. It offers variable temperature selection up to + 85 °C, and can supply do-mestic hot water to multiple draw-off points. The SHD can be operated in three modes: As an in -stantaneous, as a dual-circuit or as a single circuit domestic hot water cylinder, which also allows the use of pre-heated water (up to + 75 °C).

SHD 30, 100

Cylinder with 30, 100 litre (subject to model)

Stand-by consumption loss 0.45/ 0.77 kW

Infi nitely variable temperature selection, approx. + 35 °C to + 85 °C

21 kW in instantaneous water heater mode

Signal anode

KA 10 eltroboil

10 litre cylinder

High-grade stainless steel fi nish

Tin-plated copper hot water cylinder

Chrome tap valve

May be extended up to 3 tap valves

Up to 60 cups of boiling water available

KA 5 eltroboil

5 litre cylinder

Top quality stainless steel fi nish

Plastic hot water cylinder

Button valve in matt chrome fi nish

Up to 30 cups of boiling water available


SHO AC

48 | 49

Water supplied in a grand style | The SHO freestanding DHW cylinder is your company's very own hot spring. Thanks to its capacity of up to 1000 litres and a temperature which is infi nitely variable up to + 85 °C, it holds a large volume of hot water at the ready, at all times. The cylinder is equipped with a signal anode and thermometer as standard. Its automatic control unit maintains the water at the desired temperature. The sealed water heaters, the copper immersion heater elements of which are easy to replace, is ideal for any number of draw-off points. A domestic hot water circulation connection is fi tted.

SHO AC 600, 1000

Cylinder with 600, 1,000 litre (subject to model)

Single circuit operation 7.5 kW and 12 kW

Universal dual-circuit operation 6 / 12 – 18 / 18 kW

Optional cost-effective off-peak operation

Replaceable copper immersion heater elements

Infi nitely variable temperature selection from + 35 °C to + 85 °C

Thermal insulation with plastic jacket available as accessory


DATA, FACTS AND ACCESSORIESCAREFULLY POSITIONED INFORMATION


INSTANTANEOUS WATER HEATERSFULL ELECTRONIC CONTROL | ELECTRONIC CONTROL

Model DHE SLi electronic comfort DEL SLi electronic LCD

– Type DHE 18 SLi 25 A DHE 18/21/24 SLi DHE 27 SLi DEL 18 SLi 25 A DEL 18/21/24 SLi DEL 27 SLi– Part no. 189780 227490 189783 189788 227496 189791

Application

– Nominal capacity l 0.4 0.4

– For one / several draw-off points • / • • / • • / • • / • • / • • / •

– Mounting form1) Optional installation over & undersink Optional installation over & undersink

Connection details

– Type Pressure tested (sealed) Pressure tested (sealed)– Permiss. op. pressure MPa/bar 1 / 10 1 / 10– For water types2) Suitable for water with low limescale or with limescale content Suitable for water with low limescale or with limescale content– Water connections Threaded connections G ½" (finished/unfinished walls) Threaded connections G ½" (finished/unfinished walls)– Connected load3) kW 18 18/21/24 27 18 18/21/24 27– Voltage 3/PE ~ 400 V 3/PE ~ 400 V– Rated current A 26 29/31/35 39 26 29/31/35 39– Fuse protection A 25 32/32/35 40 25 32/32/35 40– Protection level IP 25 (hoseproof) IP 25 (hoseproof)– Test symbols VDE / GS VDE / GS

– DHW output (mixed water Δ ϕ 28 K) l/min 9.2 9.2/10.7/12.3 13.8 9.2 9.2/10.7/12.3 13.8

Equipment level

– Electrical flow control • • • – – –– Electrical air detection system • • • • • •– Solar power (pre-heated water) • • • • • •– Programmable set temperature 2 2 2 – – –– Fitness shower program 4 4 4 – – –

– ECO energy and water-saving feature l/min Adjustable from 4 to 15 – – –

– Automatic water volume control l Adjustable from 5 to 200 – – –– Child-proof system °C Adjustable from 20 to 60 – – –

– Suitable for plastic pipework4) • • • • • •– Temperature display Backlit multifunction LCD LCD– Temperature range °C Variable adjustment between 20 – 60 Variable adjustment between 30 – 60– Temperature limit °C Electronic adjustment between 21 – 60 Mechanical adjustment to 43– Control unit Fully electronic control Electronically controlled– Heating system Bare-wire heating system Bare-wire heating system– Colour White White

Weight and dimensions

– Dimensions (H x W x D) mm 478 x 225 x 105 478 x 225 x 105– Wet weight kg 4.5 4.5

Accessories (optional)– Valves for finished walls WKMD, WBMD (pressure fittings) WKMD, WBMD (pressure fittings)– Wireless comfort remote control • • • – – –– Hard wired comfort remote control • • • – – –– Wireless remote control – – – • • •

20588_018_RZ_GB_WW_TechDaten.ind52 52 30.01.2009 15:53:06 Uhr0502_RZ_WW_Broschuere_interna.pdf 52 12.02.2009 09:49:24

52 | 53

Model DHB-E SLi electronic DHB STi thermotronic

– Type DHB-E 11 SLi DHB-E 13 SLi DHB-E 18 SLi 25A DHB-E 18/21/24 SLi DHB-E 27 SLi DHB 18 STi DHB 21 STi DHB 24 STi DHB 27 STi– Part no. 223210 222429 270724 227483 270727 227608 227609 227610 227611

Application


– For one / several draw-off points • / • • / • • / • • / • • / • • / • • / • • / • • / •

– Mounting form¹) Optional installation over & undersink Optional installation over & undersink worktop

Connection details

– Type Pressure tested (sealed) Pressure tested (sealed)– Permiss. op. pressure MPa/bar 1 / 10 1 / 10– For water types2) Suitable for water with low limescale or with limescale content Suitable for water with low limescale or with

limescale content

– Water connections Threaded connections G ½" (finished/unfinished walls) Threaded connections G ½" (finished/unfinished walls)

– Electrical connection On top/underneath On top/underneath– Connected load3) kW 11.1 13.5 18 18/21/24 27 18 21 24 27– Voltage 3/PE ~ 400 V 3/PE ~ 400 V– Rated current A 16 19 26 29/31/35 39 26 31 35 39– Fuse protection A 16 20 25 32/32/35 40 32 32 35 40– Protection level IP 25 (hoseproof) IP 25 (hoseproof)– Test symbols VDE / GS VDE / GS– DHW output

(mixed water Δ ϕ 28 K) l/min 5.6 6.9 9.2 9.2/10.7/12.3 13.8 9.2 10.7 12.3 13.8

Equipment level

– Electronic air detection system • • • • • • • • •– Suitable for plastic pipework4) • • • • • • • • •– Temperature display Rotary selector with temperature drag Symbols– Temperature range °C Variable adjustment between 30 – 60, approx. Three-stage, approx.– Control unit Electronically controlled Electronically controlled– Heating system Bare-wire heating system Bare-wire heating system– Colour White White



Accessories

– Valves for finished walls (option) WKMD, WBMD (pressure fittings) WKMD, WBMD (pressure fittings)

– Stove conn. set (option) • • – – – • • – –

Key• Available, or yes.1) On the standard equipment, the water connections are located underneath.

Alternative design available with water connections above (mounting on finished walls).

2) For applications see equipment documentation.3) Regulations vary according to the local power supply; to be connected only

by a qualified electrician.4) For systems with plastic pipework, please observe the manufacturer's

instructions and limitations.

INSTANTANEOUS WATER HEATERSELECTRONIC CONTROL


INSTANTANEOUS WATER HEATERSHYDRAULIC CONTROL

Model DHH Si control HDB Si control

– Type DHH 12 Si DHH 18 Si DHH 21 Si DHH 24 Si DHH 27 Si HDB 18 Si HDB 21 Si HDB 24 Si HDB 27 Si– Part no. 227643 227574 227575 227576 227577 074192 074193 074194 074195

Application


– For one / severaldraw-off points • / • • / • • / • • / • • / • • / • • / • • / • • / •

– Mounting form1) Optional installation over & undersink Optional installation over & undersink2)

Connection details

– Type Pressure tested (sealed) Pressure tested (sealed)– Permiss. op. pressure MPa/bar 1 / 10 1 / 10– For water types2) Suitable for water with low limescale or with limescale content Suitable for water with low limescale or with limescale content– Water connections Threaded connections G ½" (finished/unfinished walls) Threaded connections G ½" (finished/unfinished walls)– Connected load3) kW 11.1 18 21 24 27 18 21 24 27– Voltage 3/PE ~ 400 V 3/PE ~ 400 V– Protection level IP 25 (hoseproof) IP 25 (hoseproof)– Test symbols VDE / GS VDE / GS

– DHW output(mixed water Δ ϕ 28 K) l/min 5.6 9.2 10.7 12.3 13.8 9.2 10.7 12.3 13.8

Equipment level

– Circuit breaker 2 switch positions 2 switch positions– Shower comfort switch • • • • • – – – –

– Suitable for plastic pipework4) • • • • • • • • •– Control unit Hydraulically controlled Hydraulically controlled– Heating system Bare-wire heating system Bare-wire heating system– Colour White White



Accessories

– Fittings for finished walls (option) WKMD, WBMD (pressure valves) WKMD, WBMD (pressure valves)

Key• Available, or yes.1) On the standard equipment, the water connections are located underneath.

Alternative design available with water connections above (mounting on finished walls).

2) For applications see equipment documentation.3) Regulations vary according to the local power supply; to be connected only

by a qualified electrician.4) For systems with plastic pipework, please observe the manufacturer's

instructions and limitations.


54 | 55

Model DHF C compact control

– Type DHF 13 C DHF 15 C DHF 18 C DHF 21 C DHF 24 C– Part no. 074301 074302 074303 074304 074305

Application

– Nominal capacity l 0.6– For one / several draw-off points •/• •/• •/• •/• •/•– Mounting form Optional installation over & undersink

Connection details

– Type Pressure tested (sealed)– Permiss. op. pressure MPa/bar 1 / 10

– For water types1) (soft / hard) Only suitable for water with low limescale– Water connections Threaded connections G ½" (finished/unfinished walls)– Connected load2) kW 13.2 15 18 21 24– Voltage2) 3/PE ~ 400 V– Protection level IP 24 (splash-proof)– Test symbols VDE / GS

– DHW output(mixed water Δ ϕ 25 K) l/min – – – – –

– DHW output(mixed water Δ ϕ 28 K) l/min 6.7 7.7 9.2 10.7 12.3

Equipment level

– Control unit Hydraulically controlled– Heating system Tubular heating element– Colour White


– Dimensions (H x W x D) mm 370 x 220 x 130– Wet weight kg 4.0

Accessories for DNM

– Fittings for finished walls (option) WKMD, WBMD (pressure valves)

Key• Available, or yes.1) For applications see equipment documentation.2) Regulations vary according to local power supply company; to be connected only

by a qualified electrician – except for units which are delivered ready to plug in.


MINI WATER HEATERS | COMPACT WATER HEATERS

Model DNM DHM DHC | DHC U | DHA

– Type DNM 3 DNM 4 DNM 6 DHM 3 DHM 4 DHM 6 DHC 3 U DHC 6 U DHC 3 DHC 4 DHC 6 DHC 8 DHA 4/8 L– Part no. 185411 185415 185418 220813 220814 185473 073477 073479 073478 073715 073480 073481 073716

Application

– Nominal capacity l 0.1 0.1 0.5– For one / several draw-off points •/– •/– •/– •/• •/• •/• •/• •/• •/• •/• •/• •/• •/•– Mounting form Optional installation

over & undersinkInstallation undersink Installation

undersinkInstallation oversink

Connection details

– Type Non-pressurised Pressure tested Pressure tested– Permiss. op. pressure MPa/bar 0 1 / 10 1

– For water types1) (soft / hard) •/• •/• •/• •/• •/• •/• •/– •/– •/– •/– •/– •/– •/–– Water connections Threaded

connections G ⅜"Threaded connections G ⅜"

Threaded connections G ⅜"

Threaded connections G ½"

– Connected load2) kW 3.5 4.4 5.7 3.5 4.4 5.7 3.5 5.7 3.5 4.4 5.7 8.8 4.4 – 8.8– Voltage2) 1/N/PE ~ 230 V 1/N/PE ~ 230 V 1/N/PE ~ 230 V– Protection level IP 25 (hoseproof) IP 25 (hoseproof) IP 24 (splash-proof)– Test symbols VDE / GS VDE / GS VDE / GS

– DHW output(mixed water Δ ϕ 25 K) l/min 2.0 2.5 3.3 2.0 2.5 3.3 2.0 3.3 2.0 2.5 3.3 5.0 2.5 – 5.0

– DHW output(mixed water Δ ϕ 28 K) l/min – – – – – – 1.8 2.9 1.8 2.2 2.9 4.5 2.2 – 4.5

Equipment level

– Control unit Hydraulically controlled Hydraulically controlled Hydraulically controlled– Heating system Bare-wire heating system Bare-wire heating system Tubular heating element– Colour White White White


– Dimensions (H x W x D) mm 142 x 191 x 82 142 x 191 x 82 277 x 200 x 104– Wet weight kg 1.4 1.4 2.1 2.5 2.0 2.1 2.4 2.4 2.5

Accessories for DNM

– Non-pressurised valves(optional)

MAW twin-lever wall mounted tapMAZ twin-lever basin tapMAE mono-lever basin tap

– –

Key• Available, or yes.1) For applications see equipment documentation.2) Regulations vary according to local power supply company; to be connected only

by a qualified electrician – except for units which are delivered ready to plug in.


56 | 57

WATER BOILERS

Model EBK 5 automatic

– Type EBK 5 G EBK 5 GA EBK 5 K KBA 5 automatic – Part no. 074286 074287 074288 074289

Application

– Nominal capacity l Max. 5– For one draw-off point • • • •– Mounting form Oversink unit

Connection details

– Connected load kW 2– Voltage1) 1/N/PE ~ 230 V– Protection level IP 24 (splash-proof)– Test symbols VDE / CE

Equipment level

– Cylinder material Glass Plastic– Temperature range, max. °C 100– Colour White– Type of valve 2-handle lever 3-handle 2-handle lever 3-handle– Valve casing colour White Chrome finish White Chrome finish


– Dimensions (H2) x W x D) mm 325 x 245 x 242 295 x 325 x 197– Wet weight3) kg 8.5 7.7

Accessories

– Draw-off tap (option) • • • •

Key• Available, or yes.1) Regulations vary according to local power supply company; to be connected only

by a qualified electrician – except for units which are delivered ready to plug in.2) Up to tap centre in fitted kitchens.3) Before installing ensure wall has sufficient load-bearing capacity.


SMALL WATER HEATERSFOR ONE DRAW-OFF POINT

Key• Available, or yes.1) The mixed water volume has a service temperature of 40 °C which is

based on a cold water temperature of 15 °C and a cylinder watertemperature of 65 °C (with respect to the operational state).

2) Regulations vary according to local power supply company; to be connected only by a qualified electrician – except for units which are delivered ready to plug in.

3) Including water connector (excl. taps).

Model SNU 5 SLi drip-stop comfort

SNU 10 SLi comfort

SN 5 – 15 SLi comfort UFP 5

– Type SNU 5 SLi SNU 10 SLi SN 5 SLi SN 10 SLi SN 15 SLi UFP 5 t UFP 5 h– Part no. 221121 221122 222199 221127 222193 222204 222203 222175 222158

Application

– Nominal capacity l 5 10 5 10 15 5– For one draw-off point • • • • • • • • •

– Mounting form– Oversink unit – – – • • • • – •

– Undersink unit • • • – – – – • –

Connection details

– Type Non-pressurised (open) Non-pressurised (open) Non-pressurised (open)– Mixed water vol. from 40 °C1) l 10 19 10 19 28 10

– Stand-by power consumption at 65 °C / 24 h kWh 0.20 0.32 0.21 0.31 0.37 0.23

– Connected load2) kW 2.0 1.0 2.0 2.0 3.3 2.0– Voltage 1/N/PE ~ 230 V 1/N/PE ~ 230 V 1/N/PE ~ 230 V– Protection level IP 24 (splash-proof) IP 24 (splash-proof) IP 24 (splash-proof)– Test symbols VDE / CE VDE / CE VDE / CE

Equipment level

– Plastic inner cylinder • • • • • • • • •– Temperature range °C 35 to 85 35 to 85 35 to 85– Temperature limit

adjustable to °C 38, 45, 55, 65 38, 45, 55, 65 45, 55, 65

– Economy option Eco °C 60 60 60– Colour White White White


– Dimensions (H3) x W x D) mm 421 x 263 x 230 503 x 295 x 275 421 x 263 x 230 503 x 295 x 275 601 x 316 x 295 415 x 252 x 215 415 x 252 x 215– Wet weight kg 8.1 15.0 8.1 15.1 21.7 21.7 8.1 8.1

Accessories

– Taps Valves for non-pressurised water heaters


58 | 59

SMALL WATER HEATERSFOR SEVERAL DRAW-OFF POINTS

Key• Available, or yes.1) The mixed water volume has a service temperature of 40 °C which is

based on a cold water temperature of 15 °C and a cylinder water temperature of 65 °C (with respect to the operational state).


3) Including water supply connector (excl. taps/valves).

SHOWER WATER HEATERSFOR ONE DRAW-OFF POINT

Model EB 15 SL comfort

– Type EB 15 SL – Part no. 222205 222206

Application

– Nominal capacity l 15

– For one / several draw-off points • / – • / –

– Mounting form– Oversink unit • •

– Undersink unit – –

Connection details

– Type Non-pressurised (open)– Permiss. op. pressure MPa/bar –– Mixed water volume of 40 °C1) l 28

– Stand-by power consumptionat 65 °C / 24 h kWh – –

– Connected load2) kW 2 3.3– Voltage 1/N/PE ~ 230 V– Protection level IP 24 (splash-proof)– Test symbols VDE / CE

Equipment level

– Copper inner cylinder – –– Plastic inner cylinder • •– Temperature range °C 35 to 85

– Temperature limitadjustable to °C – –

– Economy option Eco °C – –– Colour White


– Dimensions (H x W x D3)) mm 601 x 316 x 295– Wet weight kg 21.7

Accessories

– Taps Non-pressurised taps– Safety valves – –

SHU 5 – 10 SLi comfort SH 10 – 15 SLi comfort

SHU 5 SLi SHU 10 SLi SH 10 SLi SH 15 SLi222151 222199 222181 222211 222209

5 10 10 15

• /• • /• • /• • /• • /•

– – • • •

• • – – –

Pressure tested (sealed) Pressure tested (sealed)0.7 / 7 0.7 / 710 19 19 28 28

0.31 0.36 0.35 0.41 0.41

2.0 2.0 3.31/N/PE ~ 230 V 1/N/PE ~ 230 VIP 24 (splash-proof) IP 24 (splash-proof)VDE / CE VDE / CE

• • • • •– – – – –35 to 82 35 to 82

38, 45, 55, 65 38, 45, 55, 65

60 60White White

421 x 263 x 230 503 x 295 x 275 503 x 295 x 275 601 x 316 x 29510.2 18.0 18.1 25.9

– – – –SVMT KV 307, KV 40


WALL MOUNTED WATER HEATERSDUAL/SINGLE CIRCUIT WATER HEATERS

Key • Available, or yes.1) Dual-circuit system for reheating during the day, subject to demand.2) The mixed water volume has a service temperature of 40 °C which is



4) Including water inlet nozzles (excl. valves).5) Before installing ensure wall has sufficient load-bearing capacity.

Model SHZ 30 – 150 LCD electronic comfort

– Type SHZ 30 LCD SHZ 50 LCD SHZ 80 LCD SHZ 100 LCD SHZ 120 LCD SHZ 150 LCD– Part no. 185452 185453 185454 185455 185456 185457

Application

– Nominal capacity l 30 50 80 100 120 150

– For one / several draw-off points (pressure tested) • / • • / • • / • • / • • / • • / •

– For one draw-off point (non-pressurised) • • • • • •

Connection details

– Type Pressure tested (sealed)

– Operating mode– Dual/single circuit cylinder1) • • • • • •

– Permiss. op. pressure MPa/bar 0.6 / 6– Mixed water volume of 40 °C2) l 59 97 159 198 235 292

– Stand-by power consumptionat 65 °C /24 h kWh 0.45 0.52 0.66 0.77 0.92 1.05

– Connected load and voltage3) Dual-circuit operation: Single circuit operation: Single heat-up operation:1/2 kW, 2/2 kW, 1/4 kW, 2/4 kW, 3/4 kW | 1/N/PE ~ 230 V 1 kW, 2 kW, 3 kW, 4 kW | 1/N/PE ~ 230 V 1 kW, 2 kW, 3 kW, 4 kW | 1/N/PE ~ 230 V1/4 kW, 2/4 kW, 3/4 kW | 2/N/PE ~ 400 V 3 kW, 4 kW | 2/N/PE ~ 400 V 3 kW, 4 kW | 2/N/PE ~ 400 V1/6 kW, 2/6 kW, 3/6 kW | 3/N/PE ~ 400 V 6 kW | 3/N/PE ~ 400 V 6 kW | 3/N/PE ~ 400 V

– Protection level IP 25 (hoseproof)– Test symbols VDE / CE

Equipment level

– Steel inner cylinder, enamel-coated, with prot. anode • • • • • •

– Electronic control unit • • • • • •– Temperature range °C 20 to 85– Economy setting °C 40 to 65– Liquid crystal display • • • • • •– Impressed current anode • • • • • •– Colour White


– Dimensions (H x W x D4)) mm 770 x 410 x 420 740 x 510 x 510 1,050 x 510 x 510 1,050 x 510 x 510 1,210 x 510 x 510 1,445 x 510 x 510– Wet weight5) kg 53 78 118 140 165 203

Accessories

– Safety valves KV 30, KV 40 for pressure tested, fixtures for non-pressure tested usage (see page 73)


60 | 61




4) Including water supply connector (excl. valves).5) Before installing ensure wall has sufficient load-bearing capacity.

Model SH 30 – 150 S electronic HFA-Z 30 – 150 universal

– Type SH 30 S SH 50 S SH 80 S SH 100 S SH 120 S SH 150 S HFA-Z 30 HFA-Z 80 HFA-Z 100 HFA-Z 150– Part no. 073047 073048 073049 073050 073051 073052 073111 074467 074469 073114

Application

– Nominal capacity l 30 50 80 100 120 150 30 80 100 150

– For one / several draw-off points (pressure tested) • / • • / • • / • • / • • / • • / • • / • • / • • / • • / •

– For one draw-off point(non-pressurised) • • • • • • • • • •

Connection details

– Type Pressure tested (sealed) Pressure tested (sealed)– Mode of operation

– Single circuit cylinder • • • • • • – – – –

– Dual/single circuit cylinder1) – – – – – – • • • •– Permiss. op. pressure MPa/bar 0.6 / 6 0.6 / 6– Mixed water volume of 40 °C2) l 59 97 159 198 235 292 58 155 195 290– Stand-by power consumption

at 65 °C / 24 h kWh 0.45 0.52 0.66 0.77 0.92 1.05 0.5 0.72 0.86 1.2

– Connected load and voltage3) Single circuit operation:1 kW, 2 kW, 3 kW, 4 kW | 1/N/PE ~ 230 V3 kW, 4 kW | 2/N/PE ~ 400 V6 kW | 3/N/PE ~ 400 V

Dual-circuit operation: Single circuit operation:2/4 kW | 1/N/PE ~ 230 V 2 kW, 4 kW | 1/N/PE ~ 230 V 2/4 kW | 2/N/PE ~ 400 V 4 kW | 2/N/PE ~ 400 V 2/6 kW | 3/N/PE ~ 400 V 6 kW | 3/N/PE ~ 400 V

Single heat-up operation:2 kW, 4 kW | 1/N/PE ~ 230 V4 kW | 2/N/PE ~ 400 V6 kW | 3/N/PE ~ 400 V6 kW | 3/PE ~ 400 V

– Protection level IP 25 (hoseproof) IP 24 (splash-proof)– Test symbols VDE / CE VDE / CE

Equipment level

– Steel inner cylinder, enamel-coated, with prot. anode • • • • • • • • • •

– Temperature range °C 35 to 82 35 to 82– Economy option Eco °C 60 60– Signal anode • • • • • • – – – –– Hot water volume display • • • • • • – – – –– Colour White White


– Height4) mm 770 740 1,050 1,050 1,210 1,445 770 975 975 1,280– Width mm 410 510 510 510 510 510 410 510 510 510– Depth mm 420 510 510 510 510 510 420 510 510 510– Wet weight5) kg 53.0 78.0 118.0 140.0 165.0 203.0 52.6 113.0 137.5 199.0

Accessories

– Safety valves KV 30, KV 40 for pressure tested, valves for non-pressurised use (see page 73)


WALL MOUNTED STORAGE HEATERSDUAL/SINGLE CIRCUIT STORAGE HEATERS

Model SH 50 – 150 A

– Type SH 50 A SH 80 A SH 100 A SH 120 A SH 150 A SH 100 A UNI SH 120 A UNI SH 150 A UNI– Part no. 073120 073121 073122 073123 073124 073277 073194 073195

Application

– Nominal capacity l 50 80 100 120 150 100 120 150

– For one / several draw-off points (pressure tested) • / • • / • • / • • / • • / • • / • • / • • / •

– For one draw-off point (non-pressurised) • • • • • • • •

Connection details


– Operating mode– Single circuit cylinder • • • • • • • •

– Dual/single circuit cylinder1) – – – – – – – –– Permiss. op. pressure MPa/bar 0.6 / 6– Mixed water volume of 40 °C2) l 97 159 148 235 292 198 235 292

– Stand-by power consumptionat 65 °C /24 h kWh 0.53 0.75 0.89 0.93 1.25 0.89 0.93 1.25

– Connected load and voltage3) Single circuit operation: Single circuit operation: Dual-circuit operation:2 kW | 1/N/PE ~ 230 V 3 kW | 1/N/PE ~ 230 V 1.3 kW, 2.6 kW | 1/N/PE ~ 230 V 3.9 kW | 3/N/PE ~ 400 V

– Protection level IP 25 (hoseproof)– Test symbols CE

Equipment level

– Steel inner cylinder, enamel-coated, with prot. anode • • • • • • • •

– Temperature range °C 35 to 82– Economy option Eco °C 60– Signal anode – – – – – – – –– Hot water volume display – – – – – – – –– Colour White


– Height4) mm 740– Width mm 510– Depth mm 510– Wet weight5) kg 57.0 116.0 137.0 161.0 197.0 138.0 162.6 198.0

Accessories

– Safety valves KV 30, KV 40 for pressure tested




4) Including water inlet nozzles (excl. valves).5) Before installing ensure wall has sufficient load-bearing capacity.


62 | 63

WALL MOUNTED WATER HEATERS

Model PSH 30 – 200 TM

– Type PSH 30 TM PSH 50 TM PSH 80 TM PSH 100 TM PSH 120 TM PSH 150 TM PSH 200 TM– Part no. 222215 222216 222217 222218 222231 222232 222233

Application

– Nominal capacity l 30 50 80 100 120 150 200

– For one / several draw-off points (pressure tested) • / • • / • • / • • / • • / • • / • • / •

Connection details


– Operating mode– Single circuit cylinder • • • • • • •

– Dual/single circuit cylinder1) – – – – – – –– Permiss. op. pressure MPa 0.6– Mixed water volume of 40 °C2) l 56.2 101.5 144.3 186.0 227.9 291 385.3

– Stand-by power consumptionat 65 °C /24 h kWh 0.73 0.93 1.16 1.48 1.71 2.01 2.90

– Connected load and voltage3) Single circuit operation: 2 kW | 1/N/PE ~ 230 V– Protection level IP 25 (hoseproof)– Test symbols CE, VDE, EMV

Equipment level

– Steel inner cylinder, enamel-coated, with prot. anode • • • • • • •

– Temperature range °C 35 to 70– Economy option Eco °C 60– Signal anode • • • • • • •– Hot water volume display – – – – – – –– Colour White/grey


– Height4) mm 585 840 810 960 1,115 1,350 1,650– Width mm 390 470– Depth mm 390 470– Wet weight5) kg 46 71 106 130 154 191 250

Accessories

– Safety valves SV Ex ½ SV Ex ¾




4) Including water supply connector (excl. valves).5) Before installing ensure wall has sufficient load-bearing capacity.


Model PSH 15 – 200 ID

– Type PSH 15 MINI ID PSH 30 ID PSH 50 ID PSH 80 ID PSH 120 ID PSH 150 ID PSH 200 ID– Part no. 227468 222215 222216 222217 222231 222232 222233

Application

– Nominal capacity l 15 50 80 100 120 150 200

– For one / several draw-off points (pressure tested) • / • • / • • / • • / • • / • • / • • / •

Connection details

– Type Pressure type– Permiss. op. pressure MPa 0.6– Mixed water volume of 40 °C1) l 35.00 73.56 131.95 189.99 273.75 383.45 500.45– Stand-by power consumption

at 30–200 l/24 h kWh 0.70 0.73 0.93 1.16 1.71 2.01 2.90

– Power 220 V kW 0.30 0.90 1.35 1.80– Power 230 V kW 0.33 1.00 1.50 2.00– Voltage V 1/N/PE ~ 220 – 230– Protection level IP 24

(splash-proof)IP 25 (hoseproof)

– Test symbols CE, EMV CE, VDE, EMV

Equipment level


– Temperature range °C 35 to 80 7 to 70– Economy option Eco °C 60– Signal anode • • • • • • •– Hot water volume display • • • • • • •– Colour White White/grey


– Height2) mm 480 585 840 810 1,116 1,352 1,652– Width mm 302 390 470– Depth mm 302 390 470– Wet weight3) kg 24 46 71 106 154 191 250

Accessories

– Safety valves SV Ex ½

Key • Available, or yes.1) The mixed water volume has a service temperature of 40 °C which is


2) Including water supply connector (incl. valves).3) Before installing ensure wall has sufficient load-bearing capacity.

WALL MOUNTED WATER HEATERS


64 | 65

Model PSH 30 – 150 Comfort

– Type PSH 30 Comfort PSH 50 Comfort PSH 80 Comfort PSH 100 Comfort PSH 120 Comfort PSH 150 Comfort– Part no. 223173 223174 223175 223176 223177 223178

Application

– Nominal capacity l 30 50 80 100 120 150

– For one / several draw-off points (pressure tested) • / • • / • • / • • / • • / • • / •

Connection details


– Operating mode– Single circuit cylinder • • • • • •

– Dual/single circuit cylinder1) – – – – – –– Permiss. op. pressure MPa 0.6– Mixed water volume of 40 °C2) l 52.55 99.60 141.02 186.43 222.87 288.07

– Stand-by power consumptionat 65 °C /24 h kWh 0.52 0.69 0.72 0.84 0.91 1.21

– Connected load and voltage3) Single circuit operation: 1/N/PE ~ 230 V– Protection level IP 25 (hoseproof)– Test symbols VDE und CE, EMV

Equipment level

– Steel inner cylinder, enamel-coated, with prot. anode • • • • • •

– Temperature range °C 35 to 80– Economy option Eco °C 60– Signal anode • • • • • •– Hot water volume display – – – – – –– Colour White/grey


– Height4) mm 676 931 893 1,045 1,200 1,435– Width mm 380 475– Depth mm 380 475– Wet weight5) kg 49 75 111 135 161 199

Accessories

– Safety valves SV Ex ½ SV Ex ¾




4) Including water supply connector (incl. valves).5) Before installing ensure wall has sufficient load-bearing capacity.


Key • Available, or yes.1) Permissible heating side 0.3/3 MPa/bar.2) The mixed water volume has a service temperature of 40 °C which is


3) Regulations vary according to local power supply company; to be connected only by a qualified electrician.

4) Thermal insulation WD SBS as accessory, thickness 110 mm.5) With water connector.6) Before installing ensure the floor has sufficient load-bearing capacity.

FREESTANDING DHW CYLINDERS

Model Freestanding DHW cylinder Inst. water heating cylinder Inst. water heating cylinder

– Type SHW ACE 200 SHW ACE 300 SHW ACE 400 SBS 800 W SBS 1000 W SBS 1500 W SBS 800 W SOL SBS 1000 W SOL SBS 1500 W SOL– Part no. 070074 070075 070076 227568 227569 227570 227571 227572 227573

Application

– Nominal capacity l 200 300 400 800 1,000 1,500 800 1,000 1,500

Connection details

– Mode of operation– Single circuit cylinder • • •

Combined DHW and heating water buffer cylinder

Combined DHW and heating water buffer cylinder

– Water connection(external thread) below/above G1" / G1" G1 ¼" G1 ¼"

– DHW circulation connection G ½" – – – – – –– Heat pump connection – G1 ½" G1 ½" G2" G1 ½" G1 ½" G2"– Heating circuit connection – G1 ½" G1 ½"– Connection for opt. heat source – G1 ½" G1 ½"– Permiss. op. pressure MPa/bar 0.6 / 6 0.6 / 61) 0.6 / 61)

– Mixed water volume of 40 °C2) l 397 590 792 – – – – – –

– Stand-by power consumptionat 65 °C / 24 h kWh 1.9 2.2 2.7 – – – – – –

– Connected load andvoltage3)

Single circuit operation: 2 kW, 3 kW, 4 kW1/N/PE ~ 230 V; 6 kW3/N/PE ~ 400 V

– –

– Protection level IP 24 (splash-proof) – –– Test symbols VDE / GS – –

Equipment level

– Thermal insulation Permanently fixed/removable4) •/– •/– •/– –/• –/• –/• –/• –/• –/•

– Steel inner cylinder, enamel-coated, with prot. anode • • • – – – – – –

– Temperature range °C 35 to 82 – – – – – –

– Temperature limit can be adjusted to °C 45 to 60 – – – – – –

– Contents HE DHW l – – – 41 53 65 41 53 65– Area Solar internal indirect coil m2 – – – – – – 2.4 3.0 3.6– Colour Pearl white Thermal insulation white Thermal insulation white


– Height5) mm 1,570 1,585 1,755 1,840 2,250 2,190 1,840 2,250 2,190– Height when tilted mm – – – 1,880 2,285 2,225 1,880 2,285 2,225– Width � mm 550 650 700 790 790 1,000 790 790 1,000– Depth mm 690 790 840 910 910 1,120 910 910 1,120– Wet weight6) kg 255 368 485 950 1,175 1,736 995 1,220 1,791


66 | 67

Model Freestanding combi cylinder

Freestanding DHW cyl. with int. heat exchanger

Freestanding combi cylinder

Kitchen DHW cylinder

– Type SHW 200 S SHW 300 S SHW 400 S SHW 300 WS SHW 400 WS SB 302 S SB 402 S HT 80 S (undersink)7)

– Part no. 182120 182121 182122 185352 185353 185354 185355 074196

Application

– Nominal capacity l 200 300 400 300 400 300 400 80

Connection details

– Mode of operation– Single circuit cylinder • • • • • Optional electric flange heater9) –

– Dual/single circuit cylinder1) – – – – – Optional electric flange heater9) •

– Water connection(external thread) below/above G1" / G1" G1" / G1" G1" / G1" G ½"

– DHW circulation connection G ½" – G ½" –– Permiss. op. pressure MPa/bar 0.6 / 6 1 / 10 1 / 10 1 / 10– Mixed water volume of 40 °C2) l 397 590 792 590 792 – – 140

– Stand-by power consumptionat 65 °C / 24 h kWh 1.5 1.9 2.25 1.9 2.25 – – 1.1

– Connected load and voltage3) Dual-circuit operation: 2/4 kW, 4/4 kW | 1/N/PE ~ 230 V; 2/6 kW, 3/6 kW, 4/6 kW, 6/6 kW | 3/N/PE ~ 400 V

Single circuit operation: 2 kW, 4 kW | 1/N/PE ~ 230 V; 2 kW, 3 kW, 4 kW, 6 kW | 3/N/PE ~ 400 V

Connection for electric heater rod:

G1 ½" (in the upper third)No. of flange apertures:

2 2External flange diameter (mm):

� 210 � 210

Dual-circuit operation:1/3 kW, 2/4 kW | 1/N/PE ~ 230 V2/6 kW | 3/N/PE ~ 400 V

Single circuit operation:1, 2, 3, 4 kW | 1/N/PE ~ 400 V6 kW | 3/N/PE ~ 400 V

– Protection level IP 24 (splash-proof) IP 24 (splash-proof) – – IP 24 (splash-proof)– Test symbols VDE / GS VDE / GS – – VDE / GS

Equipment level

– Thermometer • • • • • • • –

– Thermal insulation Permanently fixed/removable •/– •/– •/– •/– •/– • /– • /– • /–

– Steel inner cylinder, enamel-coated, with prot. anode • • • • • • • •

– Display element forprotective anode • • • • • – – •

– Temperature range °C 35 to 82 35 to 82 – – 35 to 82

– Temperature limit can be adjusted to °C 45 to 60 45 to 60 – – –

– Integral heat exchanger4) m2 – – – 1.8 – – –– Colour Pure white / basalt grey Pure white / basalt grey Pure white / basalt grey White side panels


– Height5) mm 1,570 1,585 1,755 1,585 1,755 1,585 1,755 810 – 870 / 850 – 910 8)

– Width mm � 630 � 700 � 750 � 700 � 750 � 700 � 750 445 / 450 8)

– Depth mm 730 815 865 815 865 – – 550 / 600 8)

– Weight, filled with water6) kg 265 377 490 437 550 401 519 125 / 133 8)

Key • Available, or yes.1) Dual-circuit system for reheating during the day, subject to demand.2) The mixed water volume has a service temperature of 40 °C which is based on a cold

water temperature of 15 °C and a cylinder water temperature of 65 °C (with respect to the operational state).


4) Heat exchanger for the utilisation of additional energy sources, e.g. boiler operation.5) Before installing ensure wall has sufficient load-bearing capacity.6) Before installing ensure the floor has sufficient load-bearing capacity.7) The HT 80 S cylinder for mounting below can be used as a backup unit with the full

casing accessory, part no 074197.8) With full casing.


COMMERCIAL: HAND DRYERS

Model HTE electronic HTT turbotronic

– Type HTE 4 electronic HTE 5 electronic HTT 4 WS turbotronic– Part no. 073007 073008 074464– Colour Alpine white Off-white, RAL 9003 Alpine white

Connection details

– Connected load kW 1.8 2.6– Voltage V 220 – 240 220 – 240– Frequency Hz 50 50 / 60– Protection level/class IP 23 (splash-proof) / II (double-insulated) IP 23 (splash-proof) / II (double-insulated)– Air flow rate m3/h 146 250– Operating noise dB(A) 54 68


– Dimensions (H x W x D) mm 250 x 238 x 230 266 x 257 x 230 250 x 238 x 230– Weight kg 2.5 4.0 2.7

Model HTT turbotronic

– Type HTT 5 WS turbotronic HTT 5 SM turbotronic HTT 5 AM turbotronic– Part no. 074465 182053 182052– Colour Off-white, RAL 9003 Silver metallic Anthracite metallic

Connection details

– Connected load kW 2.6– Voltage V 220 – 240– Frequency Hz 50 / 60– Protection level/class IP 23 (splash-proof) / II (double-insulated) – Air flow rate m3/h 250– Operating noise dB(A) 68


– Dimensions (H x W x D) mm 266 x 257 x 230– Weight kg 4.2


68 | 69

COMMERCIAL: WATER BOILERS

Key• Available, or yes.1) Available as long as stocks last.

Model KA 5 – 10 eltroboil KA 15 – 50 eltromat®

– Type KA 5 KA 10 KA 151) KA 501)

– Part no. 221377 221378 071030 071031

Application

– Nominal capacity l 5 10 15 50– For one draw-off point • • • •– Mounting form Oversink unit Oversink unit

Connection details

– Connected load kW 2.3 2.8 3.3– Voltage 1/N/PE ~ 230 V 1/N/PE ~ 230 V– Protection level IP 22 (drip-proof) IP 24 D (splash-proof)– Test symbols – VDE/CE

Equipment level

– Cylinder material Plastic Copper, tin plated Copper– Temperature permanently set to Boiling point Boiling point– Colour Stainless steel White


– Dimensions (H x W x D) mm 501 x 337 x 203 585 x 397 x 432 500 x 410 x 420 1,000 x 410 x 420– Wet weight kg 15.5 36.0 28.8 71.8

Accessories

– Collecting tray • • – –– Tap (optional extra)) – • – –– KNS tap – – • •– FV fill valve – – • •– Drain outlet • • • •


COMMERCIAL: INSTANTANEOUS WATER HEATERS FREESTANDING DHW CYLINDERS

Key• Available, or yes.1) Dual-circuit system for reheating during the day, subject to demand.2) The mixed water volume has a service temperature of 40 °C which is based on a cold

water temperature of 15 °C and a storage water temperature of 65 °C (with respect to the operational state).

3) Regulations vary according to local power supply company; to be connected only by a qualified electrician.

4) Including water supply connector.5) Before installing ensure floor has sufficient load-bearing capacity.

Model Inst. water heating cyl. Freestanding combi cylinder Freestanding cylinder

– Type SHD 30 S SHD 100 S SB 602 AC SB 1002 AC SB 650/3 AC SHO AC 600 SHO AC 1000– Part no. 073059 073060 071554 071282 003039 001414 003352 001415 003353

Application

– Nominal capacity l 30 100 600 1,000 650 600 1,000

– For one / several draw-off points (pressure tested) • / • • / • • / • • / • • / • • / • • / • • / • • / •

Connection details

– Type Pressure tested (sealed) Pressure tested (sealed) Pressure tested (sealed)– Mode of operation

– Inst. water heating cylinder • • – – – – – – – – Single circuit operation – – Optional electric flange heater (special accessory) • – • – – Dual/single circuit cylinder1) • • Optional electric flange heater (special accessory) – • – •

– Water connection(external thread) below/above G ½" G1 ½" / G2" G 1½ "/ G1½" G 1½" / G2"

– DHW circulation connection – – G ½" G ½"– Permiss. op. pressure MPa/bar 0.6 / 6 1 / 10 0.6 / 6– Mixed water volume of 40 °C2) l 59 195 – – – 1,060 1,860

– Stand-by power consumptionat 65 °C / 24 h kWh 0.45 0.77 – – – 4.6 5.7

– Connected load andvoltage3)

Inst. water heating cyl. op.:3.5/21 kW | 3/PE ~ 400 VDual-circuit operation:3.5/21 kW | 3/PE ~ 400 VSingle circuit operation:21 kW | 3/PE ~ 400 V

Connection for electric heater rod:

G1 ½" (in the upper third)No. of flange apertures:

2 2 3External flange diameter (mm):

� 280 � 280 � 280

7.5 kW3/PE ~ 400 V

6/12 kW, 12/12 kW3/N/PE ~ 400 V

12 kW3/PE ~ 400 V

9/18 kW, 18/18 kW 3/N/PE ~ 400 V

– Protection level IP 25 (hoseproof) – – – IP 24 (splash-proof) – Test symbols VDE / CE – – – VDE / CE

Equipment level

– Thermometer – – • • – • •– Removable thermal insulation – – • • • • •


– Display element for prot. anode • • – – – • •– Temperature range °C 35 to 85 – – – 35 to 85

– Temperature limit adjustable to °C – – – – – 45 / 60

– Economy option Eco °C 60 – – – – –– Colour White


– Height4) x width mm 770 x 410 1,050 x 510 1,685 x � 750 2,525 x � 750 1,725 x � 750 1,685 x � 750 2,525 x � 750– Depth mm 420 510 790 790 830 1,000 1,000– Wet weight5) kg 54.3 140.1 754 1,212 840 760 1,231

Special accessories

– Safety valves KV 30, KV 40 – – – – –– Foam thermal insulation – – WD 612 WD 1012 WD 650 WD 611 WD 1011


70 | 71

VALVES/TAPS FOR OPEN DHW CYLINDERS AND WATER HEATERS

For kitchens | mounted on the sink

For kitchens | mounted on the sink For kitchens | mounted over the sink

* For non-pressurised operation.

Type WST-K WUM WUT MESL MES

– Part. no. 074428 222433 222432 222442 222440– Description Sink mixer tap with

swivel spout,eyelet for plug chain,flexible water connection hoses, exclusive design

Twin-lever sink mixer tap with swivel spout, eyelet for plug chain, exclusive design

Sink mixer tap with swivel spout,eyelet for plug chain,exclusive design

Mono-lever sink mixer tap for single hole installation. Cast spout with perlator and endstop, brass body, chrome finish exclusive design

Mono-lever sink mixer tap with swivel spout,spout reach 230 mm,exclusive design

– Optional combinations SNU 5 SL, UFP 5 t, SNU 10 SL

Type MESB WKM MEK

– Part. no. 222441 222434 222443– Description Mono-lever sink mixer tap with removable

rinser head, spout reach 244 mm,exclusive design

Twin-lever wall mounted kitchenmixer tap with swivel spout, spout reach 160 mm, exclusive design

Mono-lever wall mounted kitchenmixer tap with swivel cast spout, spout reach 185 mm, exclusive design

– Optional combinations SNU 5 SL, UFP 5 t, SNU 10 SL UFP 5 h, SN 5 SL, SN 10 SL, SN 15 SL, SHZ LCD*, SH SL*, HFA-Z*, SNZ 80 S 2/3


VALVES/TAPS FOR OPEN DHW CYLINDERS AND WATER HEATERS

For bathrooms | for basins

For bathrooms | for showers For bathrooms | for baths

* For non-pressurised operation.

Type WST-W WST WSM MEW

– Part. no. 074427 222430 222431 222439– Description Basin mixer tap with swivel

spout, eyelet for plug chain, exclusive design

Basin mixer tap with swivel spout, eyelet for plug chain,exclusive design

Twin-lever basin mixer tap with swivel spout and lift rod drain set, exclusive design

Mono-lever basin mixer tap with fixed cast spout and lift rod drain set, exclusive design

– Optional combinations SNU 5 SL, UFP 5 t, SNU 10 SL

Type WDM MED WBM MEB

– Part. no. 222435 222444 222436 222445– Description Twin-lever shower-wall mixer

tap with metal shower hose, 1,500 mm, shower hand set, exclusive design

Mono-lever shower wall mixer tap with metal shower hose, 1,500 mm, shower hand set, exclusive design

Twin-lever bath wall mixer tap with metal shower hose, 1,250 mm, and shower hand set, exclusive design

Mono-lever bath wall mixer tap with metal shower hose, 1,250 mm, and showerhand set, exclusive design

– Optional combinations EB 15 S, SN 15 SL, SHZ LCD*, SH SL*, HFA-Z*, SNZ 80 S 2/3 SHZ LCD*, SH SL*, HFA-Z*, SNZ 80 S 2/3


72 | 73

Type WBMD WKMD

– Part. no. 222438 222437– Description Twin-lever bath wall mixer tap with metal

shower hose, 1,250 mm, and shower hand set, exclusive design

Twin-lever, kitchen wall mixer tap with swivel spout, 160 mm spout reach, exclusive design

– Optional combinations DHE, DEL, DHB E, DHB UNI, HDB, DHF-C DHE, DEL, DHB E, DHB UNI, HDB, DHF-C

VALVES/TAPS FOR INSTANTANEOUS WATER HEATERS

For bathrooms | for baths For kitchens | oversink

SAFETY ASSEMBLIESFOR SEALED DHW CYLINDERS

Type KV 30 KV 40 KV 307 TA 260

– Part. no. 000826 000828 000757 003466– Description Safety assembly, 6 bar op.

pressure, with a funnelSafety assembly, 6 bar op. pressure with pressure reducing valve up to 10 bar and a funnel

Safety assembly, 7 bar op. pressure, with a in funnel.

Thermostatic valve for central pre-mixing. Only to be used conjunction with safety assemblies.

– Optional combinations SH 10 S, SH 15 S, SHZ 30 – 150 LCD, SH 30 – 150 S, HFA-Z 30 – 150, SHD 30 – 100 S


Legal notice | The information in this brochure cannot be guaranteed to be error-free, despite careful checking. The statements concerning equipment and equipment characteristics are non-binding. The equipment features that are described in this brochure are not considered to be agreed conditions of our products. Individual equipment characteristics may differ or may even be removed, due to the ongoing development of our products. Information concerning the latest equipment characteristics can be obtained from our sales advisors. The illustrations in the brochure are merely application examples. The illustrations also contain installation components, accessories and special equipment that are not part of the standard delivery. Reprinting of all, or part, of this brochure only with the publisher's express permission.


hot water_hot water. our element

Documents