hot melt bitumen waterproofing
TRANSCRIPT
3
Library of Birmingham
Contents
Company Overview 4
The Correct Choice 8
Radmat Support 9
System Overview 10
System Installation 12
Typical details 14
Components and Accesories 20
Other Radmat Systems 21
4
The Westfield Centre in Shepherds Bush has one of the largest roofs ever designed in central London. With a huge choice of possible waterproofing systems, PermaQuik was chosen to provide the long term security necessary to protect one of the most expensive areas of retail space in the world.
35 year material and labour guarantee
Radmat Building Products is an independent British company that provides exceptional building products to some of the most well- known projects in the world.
Within the United Kingdom Radmat is best known for supplying the PermaQuik 6100 hot melt waterproofing system through a national network of Radmat approved contractors.
PermaQuik has been used in the UK for over 15 years, and across Canada and the United States for more than 40 years. The system’s sustained high performance is guaranteed under Radmat’s recently extended 35 year warranty.
Company Overview
5
Company Overview
The Walkie Talkie building (20 Fenchurch Street, London) A comprehensive range of systems using Radmat’s PermaQuik, ParaFlex and EshaUniversal roofing membranes have been installed during the creation of the Landmark building, which includes a breathtaking ‘Sky Garden’ – one of the highest green roofs in the world.Architects: Raphael Viñoly
Bloomberg European HQ building uses PermaQuik’s Hot Melt Monolithic Waterproofing System; PQ6100, PQ2017, PQ2060/61, an ideal solution as it combined excellent waterproofing performance with toughness, durability, flexibility and strong adhesion to a variety of substrates including zero falls.
PermaQuik will last the design life of the structure
Many architects and clients have sought Radmat’s well-known technical expertise in waterproofing solutions, leading to PermaQuik being specified for:
• Government buildings where exceptional reliability and longevity are key considerations, e.g. GCHQ Cheltenham, MOD Whitehall, The Treasury, City Hall, Scottish Parliament, The Home Office
• PFI hospitals and schools where long-term performance is a fundamental requirement for underpinning the client’s 30 year-plus responsibilities for building performance
6
The new Library of Birmingham installation used PermaQuik PQ6100 Hot Melt Monolithic waterproofing system, set to deliver exceptional performance befitting of the uniquely designed structure which has set a remarkably high standard for library design.
GCHQ building, CheltenhamBeneath the central green roof at GCHQ, PermaQuik was specified to provide a lifetime of waterproofing security.
A roofing solution that is BBA Certified to last ‘the life of the building’
Company Overview
PermaQuik has been specified and used on a number of public buildings such as the Library of Birmingham (above) and the GCHQ buiding (below).
PermaQuik has also been used for schools and academies, and been independently assessed for performance and durability. This type of independent certification is of considerable benefit, and never more so than for the Building Schools for Future programme. Their documented recommendations state that the roof coverings should be independently certified to have a minimum life of 30 years.
7
Used extensively on and around the higher terrace and over the many podium levels, PermaQuik was the waterproofing choice for Olympic Village, London.
Crossrail Place, Canary WharfExtensive and densely planted gardens are the main feature in the roof terrace above the Cross Rail terminal, shops and restaurants. PermaQuik was the waterproofing choice of contractors Prater Ltd.
Blue and Green roof systems that provide first-class performance
Company Overview
PermaQuik is regularly used as the waterproofing protection beneath permanent features such as green roofs. Our system has been accredited to last the lifetime of the structure; it is fully adhered, can self heal and is widely used in zero fall applications and within water retaining structures. Very few systems provide such credentials, and these attributes should always be considered a necessity when waterproofing beneath substrates that will be extremely costly to remove.
Working in conjunction with trained horticulturists, Radmat provides a wide range of systems, from standard hand-seeded biodiverse roof gardens to options with immediate visual effect such as wildflower or sedum roof blankets.
Certificate No 97/3336
8
Technical ExpertiseOur technical staff are experts in waterproofing solutions and are passionate about sharing their knowledge with architects, clients and contractors through RIBA approved CPD courses. Contact Radmat on 01858 410 372 or email [email protected] for more details.
Notable Contracts
Used extensively on and around the higher terrace and over the many podium levels, PermaQuik was the waterproofing choice for City Hall, London.
Why PermaQuik? Radmat has been at the forefront of the expansion of hot melt technology in Europe for the past 15 years, and in North America for the last 40 years. At Radmat we frequently work with architects, clients, main contractors, and our approved contractor network, to improve the quality of our offer. This has led to a huge growth in the use of hot melts technology. Working closely with Shell UK, Radmat have developed a blended bitumen that is workable at considerably lower temperatures, and has reduced packaging to minimise any excess site waste.
Whilst many companies may look to copy the Radmat formula, many will not succeed. Given the importance of a watertight building, PermaQuik will always be the proven solution.
ProductionThe PermaQuik 6100 monolithic membrane and its associated products are fully certified for quality. With manufacturing bases for PermaQuik in Ontario Canada, and Lancashire England, we have the ability to supply our products quickly and efficiently to a worldwide list of clients. Within each region we have looked to gain independent accreditation for our products and processes. In the United Kingdom PermaQuik is independently approved by the British Board of Agrément (BBA), certificate No. 97/3336, and is now coming to its fifth issue. The certificate states that once installed PermaQuik will continue to perform and remain weathertight for the design life of the structure to which it is applied.
The Correct Choice
Westfield Shopping Centre The Buchan Group
Scottish Parliament Enric Miralles & RMJM
St Barts New Hospital HQK International
Chiswick Park Richard Rogers Partnership
The People Building Hemel Hempstead Fletcher Priests Architects
The Deep Terry Farrell & Partners
St. Mary Magdalene Academy Feilden Clegg Bradley Studios
The Home Office London Terry Farrell & Partners
City Hall Foster + Partners
Canary Wharf BP 3 & 4 Terry Farrell & Partners
Mossbourne Academy Richard Rogers Partnership
University College London Hospital Llewellyn Davies
GCHQ Cheltenham Gensler
Tower Place Foster & Partners
Manchester Civil Justice Centre Denton Corker Marshall
New Hospital PFI Nightingale Associates
Bishops Square Foster + Partners
Derby New Hospital PFI Nightingale Associates
MOD Headquarters Whitehall HOK International
Radmat Building Products Ltd,Holland House, Valley Way,Rockingham Road,Market HarboroughLeicestershireLE16 7PS
t: 01858 410 372e: [email protected]: https://radmat.com
This drawing (in electronic or paper format) and the copyright thereon are the property of RadmatBuilding Products Ltd and must not be reproduced in part or in whole or passed on to others withoutpermission.· *U-values are indicative, for project specific U values contact [email protected]· For NBS Specifications contact [email protected]· For further product information go to https://radmat.com/category/product-data/· Do not scale from .PDF files of this drawing, only scale from .DWG files.· All dimensions in mm unless otherwise noted· FLOORMATE™, PERIMATE™, STYROFOAM™, XENERGY™ are Trademarks of DDP Specialty
Electronic Materials US, Inc. (“DDP”) or an affiliated company of DDP
Drawn:
Date:
Drawing No:
Scale:
Revision:
IndicativeU-value*(W/m²K)
InsulationThickness
(mm)
CompleteSystemWeight(kg/m²)
0.30 80 133.81
0.24 105 134.66
0.19 130 135.51
0.17 145 136.02
0.15 175 137.04
0.13 205 138.06
0.11235
(105 + 130) 139.08
0.10260
(130 + 130) 139.93
Regulatory, Standards & Guidance Compliance
Building Regulations Design Fire Wind Thermal Drainage/Blue Roof Green Roof
The Building Regulations 2010(England and Wales)
(as amended)
The Building (Scotland)Regulations 2004 (as amended)
The Building Regulations(Northern Ireland) 2012
(as amended)
BS EN 1992-1-1:2004+A1:2014Eurocode 2: Design of concrete
structures. General rules andrules for buildings
BS6229:2018 Flat roofs withcontinuously supported flexible
waterproof coverings.Code of practice
BS 8217 : 2005 Reinforcedbitumen membranes for roofing.
Code of practice
NHBC Standards, Chapter 7.1Flat roofs and balconies
LRWA Hot Melt Code of Practice
BS 476-3:2004 Fire tests onbuilding materials and structures.Classification and method of testfor external fire exposure to roofs
BS EN 13501-5:2005+A1:2009Fire classification of constructionproducts and building elements.Classification using data fromexternal fire exposure to roofs
tests
DD ENV 1187:2002 Testmethods for external fire
exposure to roofs
BS EN 13501-1 : 2007 Fireclassification of construction
products and building elements.Classification using test data
from reaction to fire tests
BS EN 1991-1-4:2005+A1:2010Eurocode 1 Eurocode 1. Actionson structures. General actions.
Wind actions
BRE DIG 311 Wind scour ofgravel ballast on roofs
ETAG 031-1 Guideline for European technical approval ofinverted roof insulation kits. Part 1: general (ETAG 031)BS5250:2011+A1:2016 Code of practice for control of
condensation in buildings
BS EN 15026:2007 Hygrothermal performance of buildingcomponents and building elements. Assessment of
moisture transfer by numerical simulation
BS EN 13164 : 2012 Thermal insulation products forbuildings. Factory made extruded polystyrene foam
(XPS) products.
BS EN ISO 6946 : 2007 Building components andbuilding elements. Thermal resistance and thermal
transmittance. Calculation method
BRE Report BR 443 : 2006 Thermal performanceof buildings
BS EN 12056-3:2000 Gravitydrainage systems inside
buildings. Roof drainage, layoutand calculation
GRO Code of Best Practice
BS EN 13948: 2007 Thisstandard, entitled ‘Flexible sheets
for waterproofing. Bitumen,plastic and rubber sheets for roofwaterproofing. Determination ofresistance to root penetration
BBA Certification 97/3336 J
Durability Statement Life of the Building
Inverted Roof üZero Falls üGreen Roof üBlue Roof ü
General Design InformationUpstand Heights
Perimeter Upstands 150mmDoor Thresholds 75mmPenetrations 150mm
Fire Performance Statement
Unrestricted under the National BuildingRegulations (EXT.F.AA & Broof t4)
CR
24/01/2020
1:5 @ A3
-
RAD-PQ-122PermaQuik Inverted Tall Upstand Detail
Radmat ProTherm XENERGY™ MinK Water Flow Reducing Layerin accordance with Radmat NBS specification J31/130 & 354
Radmat ProTherm G XENERGY™ ULTRA™ (XPS) Extruded PolystyreneInsulation Boards to achieve required U-value in accordance with RadmatNBS specification J31/130 & 340
Radmat PermaQuik PQ6100 Hot Melt Waterproofing Systemin accordance with Radmat NBS specification J31/130 & 353Structural Deck prepared in accordance withRadmat NBS Specification J31/110
Radmat ProTherm RockFace A2 Upstand insulation, thickness inaccordance with Radmat NBS Specification J31/342
20-40mm Rounded washed stone ballast to perimeter
InStar or equivalent Paving Support in accordance with Radmat NBSspecification J31/374
Concrete Paving Minimum 80kg/m² in accordance with RadmatNBS specification J31/370
EPDM Membrane sealed by external walling contractor toPermaQuik using either Radmat PQ-T1520 double-sided tape orSikaPrimer AFP with SikaBond TF Plus-N.
Flats, Residential Care Premises, Student Accommodation &Hospitals below 18m in England & Wales (11m in Scotland),and all other building types: Radmat ProTherm SD UpstandInsulation board. See PDS for specification and methods ofattachment. Thickness in accordance with NBS J31/342.
Flats, Residential Care Premises, Student Accommodation &Hospitals 18m and above in England & Wales (11m in
Scotland): Radmat ProTherm RockFace A2 Upstand Insulationboard. See PDS for specification and methods of attachment.
Thickness in accordance with NBS J31/342.
Radmat ProTherm SD Upstandinsulation, thickness in accordance with
Radmat NBS Specification J31/342
Upstand Insulation
Radmat Protection Sheet in accordance with Radmat NBSspecification J31/780
Min.100mm150mm
AboveFFL
Radmat EshaBase / AluBase Waterproofing(Type in accordance with specification) lappedonto PermaQuik PQ6100 by a minimum of 100mm
9
For instant support call Radmat on: 01858 410 372
Radmat Support
Radmat offers extensive technical support at all stages of the construction process, enabling the development of appropriate and efficient design solutions for a wide range of building projects.
We are committed to make available first-class materials, installed by an approved list of contractors and agree designs that are both practical and cost effective.
Detailed DesignAssistance with detailed design includes: • CAD drawings • Condensation analysis • Hydraulic resistance • Wind loadings and uplift • Drainage fall/dispersal calculations • NBS format specifications
Tender DocumentationRadmat can assist with the compilation of roofing tender documentation for each building project, will provide a list of roofing contractors approved for the system and can also provide realistic cost advice at project planning stage installed PermaQuik will continue to perform and remain weathertight for the design life of the structure to which it is applied. Within Canada, PermaQuik is approved by the Canadian Government specification board (CGSB) under 37-GP-50M Standard for ‘Hot applied rubberised asphalt for roofing and waterproofing’.
Approved ContractorsThe PermaQuik system is installed by a national network of Radmat contractors. These specialist trade contractors are trained and frequently monitored by Radmat technical personnel to maintain the high quality of service expected. During the design stage we either provide technical drawings and calculations for the contractors or we review and sign-off their details to ensure all elements of the build are fully checked.
Site VisitsWe provide on-site assessment of the installation process, firstly to determine that the substrate is acceptable and thereafter to ensure that the application of PermaQuik 6100 is carried out correctly and in line with our recommendations.
WarrantyAfter the acceptable completion of the works, and following an independent electronic test, we will issue either a Standard or 35 year Gold single source workmanship and materials warranty.
Data SheetsProduct, health and safety and material data sheets are available from Radmat on request or can be downloaded from our website at www.radmat.com.
10
PermaQuik 6100 monolithic membrane roofing system is a one part, hot applied, seamless rubberised self-healing membrane made from bitumen, natural rubbers, and a blend of polymers, further reinforced with a high tensile polyester fabric. This mix combines excellent waterproofing performance with toughness, flexibility, and strong adhesion to a variety of substrates.
The membrane joins to form a fully sealed monolithic bond when areas of previously laid PermaQuik are lapped with new hot material. This allows the upstands to be installed first, giving other trades the ability to swiftly progress with the fabric of the building. It also enables work to stop and start as required without affecting the quality of the finished membrane. PermaQuik will even self-heal minor damage and is also designed to accept a high degree of structural movement.
PermaQuik provides the main waterproofing protection to any number of building types. Routinely specified as the preferred roofing solution, it is widely used beneath green roof installations, on ground floor plazas and in areas where long term weather tightness is a necessity.
PermaQuik can be installed to site working temperatures of -18°C and after installation the membrane will immediately remain unaffected by rain, wind or snow. PermaQuik has been independently certified by the BBA to perform on a zero falls construction and has a durability statement of lifetime of structure.
Seamless monolithic bond
System Overview
Offers long-term protection under roof gardens
11
Benefits• Quick and straightforward to apply
• Completely seamless to form a monolithic bond
• Water cannot track under the membrane – therefore enabling any damage to be traced quickly and easily repaired
• Adheres readily to any sound concrete, brickwork, timber or steel, and will effectively cover corners and any minor surface irregularities or protrusions
• Can be applied in temperatures down to -18ºC (unlike conventional bitumen/asphalt membranes which require temperatures above freezing
• Excellent low-temperature flexibility and adhesion characteristics
• No on-site curing time required
• When used over construction or bridging joints, without the need for specific detailing, the membrane is flexible enough to accommodate minor structural movements that are likely to occur
• Membrane interleaved with a reinforcement sheet gives triple protection to flashings/penetrations
• Once covered with a protection sheet, the waterproofed area can be immediately opened up to following trades
• Will self heal minor damage under applied loads
• Membrane functions efficiently when applied to roofs with zero falls
• Membrane has been independently assessed to last the lifetime of the structure.
The mixed-use development of Principal Place, comprising of a 15-storey office building (home to Amazon HQ) 20,000 square foot of retail space and a 50-storey luxury residential tower, used PermaQuik extensively throughout the development because of its durabliity for the brown and green roofs.
System Overview
12
Typical working surface
Sweep to remove debris
Apply Radmat Surface Conditioner
Although roof areas will vary from project to project, a typical installation procedure for an inverted roof terrace is described below to illustrate the use of the PermaQuik system.
PermaQuik and Texsa Root Barrier are installed (right) on The Forge, London. This residentiial project is a mixture of Blue and Green Roofs, PermaQIk will ensure watertightness and durability to last the design life of the building.
System Installation
Suitable Substrates1. In situ structural concrete to BS 8110, density to be no less than
2100kg/m3 and with no more than 5% moisture by volume when fully cured after a period of 14-21 days. Concrete should be wood float, wood trowelled or a similar finish but not power floated or tamped.
2. Precast concrete (structural grade)
3. Dense concrete blocks
4. Metal, timber boarding, WBP or marine plywood
5. Cement-bonded particle board
6. High-strength modified screed
7. Foamglas cellular insulation
Concrete Substrate PreparationTypically, the cleaning of a concrete surface will commence with a thorough sweep of all dirt and construction debris and then cleaning with a blower. Do NOT power wash with water.
All concrete surfaces must be left dry, frost free, free of voids, laitance or any other matter that may impair the high bond or performance of the membrane. Contact Radmat for advice on the effective removal of more difficult contaminants such as form-release agents or curing compounds.
The resultant surface should be uniform and lightly roughened to increase the bond achieved by the membrane.
After cleaning and any necessary repair work the concrete substrate should be primed with Radmat Surface Conditioner, a high penetration primer, spray or roller applied at the rate of 7-12m2/litre. Allow the primer to dry thoroughly. Metal, plywood and wood boarding need not be primed.
13
Install first layer
Apply 1st layer in 1m wide bays.
Install reinforcement layer.
Install final layer with protection sheet.
Check thickness of system.
System Installation
ApplicationAfter the concrete substrate has been primed, heat the blocks of PermaQuik 6100 in a double-lined oil or air type melter to a temperature of 150°C - 180°C and mix slowly. The application of PermaQuik should not proceed during inclement weather and rain soaked surfaces should be thoroughly dry before the first layer is applied.
The membrane should be installed on all the vertical surfaces prior to application of the horizontal surfaces. Ensure that when applied the material is returned onto the flat by a minimum of 150mm. Using a squeegee apply the first layer of membrane to the main areas of the substrate to a minimum thickness of 3mm. Work to a bay size of approximate 1m wide but allow to extend this to accommodate the 75mm overlap.
Apply PermaQuik PQ2016 fleece reinforcement, overlapped by 75mm, and brush into the membrane. Ensure there are no air pockets or creases. On the same day apply a second coat of PermaQuik to a minimum thickness of 3mm fully encapsulating the fabric reinforcement within the membrane.
A Radmat protection sheet should then be brush-rolled into the membrane surface as quickly as possible while it is still tacky and warm. All protection sheet edges should overlap by a minimum 75mm and sealed with PermaQuik. Once installed the waterproofed area can be accessed by operatives to install the subsequent coverings.
TestingBefore the application of any insulation or covering materials the roof area should undergo either an electronic roof integrity test or a flood test. Any damaged areas will be highlighted and can be easily repaired. PermaQuik 6100 is a thermoplastic material, therefore the heat from the new material will reactivate the existing membrane to fuse both layers together, forming a monolithic barrier.
CoveringsAfter the successful application of the PermaQuik membrane it can either be left exposed, provided a suitable protection layer is incorporated, or covered by insulation and a variety of materials including our MedO range of green roof systems.
14
Typical Details
Inverted Roof Build-up
Inverted Biodiverse Green Roof
Inverted Wildflower Green Roof (Insulated Upstand)
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
PermaQuik PQ6100 Hot Melt Waterproofing System
Structural Deck
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
PermaQuik PQ6100 Hot Melt Waterproofing System
Structural Deck
MedO GM40 Biodiverse Substrate
MedO D25 Drainage & Reservoir Board
MedO G11 Filtration Fleece
MedO Seed Mix or Plug-Plants
Log Piles, Sand Piles and Boulders habitat provision
Gravel Stop Retention Barrier
Gravel Fire & Vegetation Break, comprising 20-40mm Rounded Washed Stone or concrete paver
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
PermaQuik PQ6100 Hot Melt Waterproofing System
Structural Deck
MedO Wildflower Seed Mix, Plug Plants or Pre-Grown Blanket
MedO D25 Drainage & Reservoir Board
MedO G11 Filtration Fleece
Gravel Fire & Vegetation Break, comprising 20-40mm Rounded Washed Stone or Concrete Paver
Radmat ProTherm Rockface A2 or SD Upstand Board
MedO GM30 Wildflower Substrate
15
Inverted Extensive Green Roof (Pre-grown)
Blue Roof Control Outlet Extensive Green Roof
Blue Roof Bedded Continuous Pavers
Typical Details
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
PermaQuik PQ6100 Hot Melt Waterproofing System
Structural Deck
MedO GM20 Extensive Substrate
MedO D25 Drainage & Reservoir Board
MedO G11 Filtration Fleece
Radmat MedO SedumPlus Pre-Grown Blanket
Gravel Stop Retention Barrier
Gravel Fire & Vegetation Break, comprising 20-40mm Rounded Washed Stone or Concrete Paver
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Radmat 370 RootSafe Texsa Black Mineral
PermaQuik PQ6100 Hot Melt Waterproofing System
Structural Deck
MedO Substrate
MedO D25 Drainage & Reservoir Board
MedO G11 Filtration Fleece
MedO MedO Plug Plants, Seed Mix or Pre-Grown Blanket
Radmat Inspection Chamber with lid
Min 500mm Non-Vegetative Barrier
SWG Blue Roof Geocell, wrapped in G12 Filter Fleece
PQ2060/2061 Detailing Membrane
Radmat Outlet with Control Orifice and Integrated Overflow Pipe
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Radmat 370 RootSafe Texsa Black Mineral
PermaQuik PQ6100 Hot Melt Waterproofing System
Structural Deck
Concrete Paving
Sand bedding for Pavers
SWG Blue Roof Geocell, wrapped in G12 Geotextile Filter Fleece
Aggregate sub-base
MedO G11 Filtration Fleece
16
Insulated SFS Upstand Detail
Rainwater Outlet Details
Pitch Pocket Details
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 SL
Protection Sheet
Cover flashing
ProTherm RockFace A2 or ProTherm SD Upstand insulation board
20-40mm rounded washed stone ballast to perimeter
Structural Deck
PermaQuik PQ6100 Hot Melt Waterproofing System
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
Structural Deck
PermaQuik PQ6100 Hot Melt Waterproofing System
PQ2060/2061 Detailing Membrane
Rainwater Outlet with leaf guard
Inspection Chamber
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
Structural Deck
PermaQuik PQ6100 Hot Melt Waterproofing System
PQ2060/2061 Detailing Membrane
20-40mm rounded washed stone ballast to perimeter
Typical Details
17
Hot Pipe Penetration Detail
Cold Pipe Penetration Detail
Protection Sheet
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
Structural Deck
PermaQuik PQ6100 Hot Melt Waterproofing System
EshaBase Sand /AluBase XL to form waterproofing seal
20-40mm rounded washed stone ballast to perimeter
Shock Absorption Pad
Metal capping
Threads sealed with mastic as bolts tightened
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
Proprietary Cowling
EshaFlex 370 FireSafe Black Mineral-faced Protection Sheet
20-40mm rounded washed stone ballast to perimeter
Structural Deck
PermaQuik PQ6100 Hot Melt Waterproofing System
Stainless Steel Jubilee Clip
PQ2060/2061Detailing Membrane Metal Pipe Sleeve mechanically-fixed to structural
deck to receive waterproofing membrane
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
Proprietary Cowling
EshaFlex 370 FireSafe Black Mineral-faced Protection Sheet
20-40mm rounded washed stone ballast to perimeter
PQ2060/2061 Detailing Membrane
PermaQuik PQ6100 Hot Melt Waterproofing System
Stainless Steel Jubilee Clip
Metal Pipe Sleeve mechanically-fixed to structuraldeck to receive waterproofing
Structural Deck
Typical Details
Plinth Detail
Concrete Paving Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 SL
Protection Sheet
Structural Deck
EPDM Membrane sealed by external walling contractor to PermaQuik
ProTherm RockFace A2 or ProTherm SD Upstand insulation board
20-40mm rounded washed stone ballast to perimeter
PQ2060/2061 Detailing Membrane
Parapet Outlet with Leaf Guard
PermaQuik PQ6100 Hot Melt Waterproofing System
18
Parapet Outlet Detail
Insulated Upstand with Termination Bar
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
GRP or Lead apron flashing mechanically-fixed at 150mm centres, sealed
ProTherm RockFace A2 or ProTherm SD Upstand insulation board
20-40mm rounded washed stone ballast to perimeter
Structural Deck
PermaQuik PQ6100 Hot Melt Waterproofing System
Waterproof concrete, sealed concrete or cladding over by others
Parapet Upstand Detail
Concrete Paving Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRAProtection Sheet
Structural Deck
EPDM Membrane sealed by external walling contractor to PermaQuik
ProTherm RockFace A2 or ProTherm SD Upstand insulation board
20-40mm rounded washed stone ballast to perimeter
PermaQuik PQ6100 Hot Melt Waterproofing System
Typical Details
Waterproofing General Cracks up to 6mm
Waterproofing Expansion Joints up to 12mmPermaQuik PQ6100
Hot Melt Waterproofing System
PermaQuik PQ6100 Hot Melt Waterproofing System
Radflex 125 Expansion Joint Reinforcement Strip
Joint Filler Material
Structural Deck
Waterproofing Expansion Joints greater than 12mm
19
Joint Details
Change of Level Details
Un-insulated Upstand with Termination Bar
PQ2060/2061 Detailing Membrane
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
Termination bar mechanically-fixed at 150mm centres, sealed with Shell Tixophalte bituminous compound
EshaFlex 370 FireSafe Black Mineral-faced Protection Sheet
20-40mm rounded washed stone ballast to perimeter
Structural Deck
PermaQuik PQ6100 Hot Melt Waterproofing System
Waterproof concrete, sealed concrete or cladding over by others
Concrete Paving
Paving Support
ProTherm XPS X MK Water Flow Reducing Layer
ProTherm G XPS X 300 ULTRA
Protection Sheet
ProTherm RockFace A2 or ProTherm SD Upstand insulation board
20-40mm rounded washed stone ballast to perimeter
Structural Deck
PermaQuik PQ6100 Hot Melt Waterproofing System
Corrosion-resistant counter-flashing
Typical Details
20
A bitumen primer that is roller-applied to concrete surfaces to improve the adhesion of PermaQuik monolithic membrane PQ6100. EshaPrimer is a quick drying solution designed to penetrate and seal a variety of porous surfaces.
EshaPrimer
Radmat Red Primer High penetration synthetic primer intended for use on concrete and various porous substrates.
High Bond Polymer Primer A quick drying green synthetic rubber based primer for use with hot melt waterproofing systems designed to penetrate and seal a variety of porous surfaces including masonry, concrete, cementitious screed/renders, existing waterproofing and structural steelwork.
A two-coat rubberised bitumen membrane, formulated from bitumen, natural and synthetic rubbers and fillers. Applied to an overall nominal 6mm thickness, it is used as the main waterproofing for roofing, podiums, plaza decks and under green roofs.
PermaQuik Monolithic Membrane PQ6100
A lightweight polyester fabric, used as reinforcement for the PermaQuik monolithic membrane PQ 6100. It is designed to accommodate minor structural movement and shrinkage cracks.
PermaQuik Reinforcing Fabric 2017
Lightweight uncured neoprene rubber strip, malleable under gentle hand pressure, and used as flashing reinforcement to upstands, junctions between dissimilar materials and expansion joints.
PermaQuik Detailing Membrane PQ2060/61
A lightweight SBS oxidised bitumen membrane with a polyester core, used to protect the surface of the PermaQuik monolithic membrane PQ6100. Allows early foot traffic access to the roof.
Radmat Standard Protection Sheet
A light duty reinforced bitumen membrane used to temporarily protect the surface of the PermaQuik PQ6100 membrane. Allows early foot traffic access to the roof. It has a bituminous glass fabric as lining and is suitable as an access sheet over PQ6100.
Radmat PQ1800 Protection Sheet
An APP plastomeric bitumen-based waterproofing membrane, with anti-root treatment for blue/green roofing with non-woven polyester felt reinforcement. Used to protect the surface of the PermaQuik monolithic membrane.
Radmat 370 RootSafe Texsa Black Mineral
A UV stable SBS modified elastomeric bitumen felt reinforced with a polyester fabric, used to protect the surface of the PermaQuik monolithic membrane PQ 6100. It is highly resistant to puncturing, has excellent tensile strength, is extremely flexible, and with slate grey granules, provides an aesthetically attractive roof appearance.
EshaFlex 370 Plain
A water vapour permeable membrane installed over extruded polystyrene insulation that allows the overall depth to be reduced without loss of performance.
Protherm XPS X MK Water Flow Reducing Layer
The thinnest available XPS for inverted roofs. A unique rigid, closed cell, extruded polystyrene board with integral high density skin.
ProTherm G XPS X 300 ULTRA
Components & Accessories
An APP plastomeric bitumen-based waterproofing membrane, with anti-root treatment for blue/green roofing with non-woven polyester felt reinforcement. Used to protect the surface of the PermaQuik monolithic membrane.
Radmat Root Barrier P
A double sided butyl rubber adhesive compound that provides an effective means of sealing and jointing EPDM membranes glass, steel, Plexiglas, polycarbonate, wood, aluminium, PVC and many other construction materials to PermaQuik PQ6100.
PQ-T1520 Double Sided Sealing Tape
21
For the new Scottish Parliament, specifying the correct waterproof membrane for this unique building was of utmost importance for Enric Miralles & RMJM. PermaQuik was chosen for its proven track record. PermaQuik was also widely used beneath the intensive green roofs of the buildings.
Manufactured from Polypropylene, SWB/G Geocells are load bearing modular units, providing attenuation as part of a Blue Roof system that is designed to manage and control incident rainfall at a rate in line with the SuDS strategy or the attenuation requirements for a development.
Blue Roof Geocells
Radmat DM10HD is a high-density drainage element for roof and podium areas requiring vehicular access or high volumes of pedestrian access, including motorised wheelchairs and mobility scooters.
MedO DM10HD Drainage Element
Radmat DM12 is a drainage board consisting of a non woven needle punched geotextile filter layer thermally bonded to one side of a 1.2mm deep HDPE (High Density Polyethylene) cuspated core. DM12 is effectively impermeable one side. The textile filter has a flap extending beyond the core on one edge.
MedO DM12 Drainage Board
Radmat DCM25 is a heavy duty drainage element with incorporated protection properties for the use in intensive green roof applications or in hard landscape applications.
MedO DCM25 Drainage Board
Unique rigid, closed cell, extruded polystyrene board with integral high density skin. Zero Ozone Depletion Potential and a Global Warming Potential (GWP) of less than 5.
ProTherm G XPS X 300/500/700 SL
VIP Inverted Roof Insulation. State of the art Vacuum Insulation Panels allowing the thinnest possible construction.
ProTherm Quantum® PLUS+
Used to thermally insulate and protect upstand walls in inverted flat roof systems. Manufactured from a CO2 blown extruded polystyrene foam factory laminated to a 6mm thick weather resistant high impact facing board.
ProTherm SD Upstand Board
Components & Accessories
VIP Inverted Roof Insulation. State of the art Vacuum Insulation Panels allowing the thinnest possible construction.
ProTherm RockFace A2
Engineered to meet the demand for a Class A1 inverted roof insulation board for use on roofs, roof terraces and balconies. Suitable for use with any inverted roof waterproofing membrane including hot melt, liquid applied, reinforced bitumen membrane or single ply membrane.
ProTherm FOAMGLAS® INVATHERMTM
The Forge, London. Blue Roof Attenuation System
22
MedO Green Roof System
ParaFlex Cold Applied System
Call 01858 410 372for instant help or more information or visit:www.radmat.com
100 Liverpool Street, London. ProTherm Quantum PLUS+ VIP Inverted Roof Insulation System
For technical assistance please email: [email protected]
Radmat Systems
Radmat has a range of systems that can be used in isolation or integrated with PermaQuik.
Blue Roof System – SWB Blue Roof Geocells provides attenuation as part of a Blue Roof system that is designed to manage and control incident rainfall at a rate in line with the SuDS strategy or the attenuation requirements for a development.
ParaFlex – a cold applied liquid resin waterproofing system that has unique fast-curing properties and can be laid at temperatures as low as -5°C.
MedO – our green roof solution suitable for extensive, semi-intensive, intensive and biodiverse green roofing systems.
ProTherm Quantum® PLUS+ – VIP inverted roof insulation. An innovative insulation system that can revolutionise a construction build. With a dramatic reduction in depth and no loss of thermal performance.