hoses - cspoutdoors

oil &

ga

s

For Orders: Phone 1.800.592.6940 / Fax 318.688.6487 / www.cspcatalog.com 259

Hoseseaton Water suction Hose

stratoflex 213 Hydraulic Hoses

The Eaton EH360 Water Suction and Discharge Hose is an economical, lightweight and flexible hose designed for applications in light and medium water suction and discharge operations. The SBR blend in the cover and tube is designed to provide exceptional resistance to abrasion and weathering. It incorporates a steel helical wire in the hose wall for full suction capability and is an excellent choice for construction and industrial applications.

Stratoflex 213 Hydraulic Hoses offer industry leading performance and value. Meeting or exceeding specifications, these hoses are available in the sizes, pressure ratings and long-lasting durability your hydraulic or pneumatic systems demand. Use for petroleum base hydraulic fluids and lubricating oils, diesel fuels and anti-freeze solutions. Reinforced with one fiber braid and one steel braid. Specifications SAE J1402 AI/D.O.T. FMVSS 106 AI – Air Brake. Sold by the foot.

standard duty PVc discHarge Hose50’ PVC Standard Duty, Blue, Water Discharge Hose with C-E AL. 3:1 Safety Factor. 65# Working Pressure. Operating temperature -5 – 130° F.

DHF-52 ...........................................................................Call for pricing

nortH american fire Hose Poly-tuff HosePOLY-TUFF 800 is a 100% polyester, double jacket construction hose with a high grade, single-ply, extruded synthetic rubber liner. 50’, Plain White in 1-1/2” or 2-1/2” with Factory Mutual Label.NAF-PT800-1.550W - 50’ x 1-1/2” ...............Call for pricingNAF-PT800-2.550W - 50’ x 2-1/2” ...............Call for pricing

goodyear® Pyroflex® ii Hot air BloWer Hose

diesel fuel Hoses

For conveying hot air from compressors to tanks to bulk dry material carriers. Black heat-resistant Versigard® synthetic rubber tube with a heat-resistant black Versigard® synthetic rubber with orange spiral stripe (wrapped impression) cover. Reinforced with spiral-plied synthetic fabric with wire helix.

For petroleum based hydraulic oils, anti-freeze solutions, water, hot lubricating oils, diesel fuels and air. • 1/4” through 3/4” with varying lengths

HOTAIRBLOWER300 3” Scrubber Hose ............................................................................................................................................. Call for pricingHOTAIRBLOWERASSY 3” Scrubber Hose Assembly ............................................................................................................................. Call for pricing

Part Number Description I.D. O.D. Min. Bend Radius Price

EATON200-20CXE 2” X 20’ w/Male and Female Couplings 2” 2.48” 12” Call

EATON200HOSE 2” Hose, No couplings, Sold by the Foot 2” 2.48” 12” Call

EATON300-20CXE 3” x 20’ w/Male and Female Couplings 3” 3.54” 18” Call

EATON300HOSE 3” Hose, No Couplings, Sold by the Foot 3” 3.54” 18” Call

EATON400-20CXE 4” x 20’ w/Male and Female Couplings 4” 4.58” 24” Call

EATON400HOSE 4” Hose, No couplings, Sold by the Foot 4” 4.58” 24” Call

Part Number I.D. O.D. Working Pressure Min. Bend Radius Vacuum Rating (in of Hg) Price

213-6 5/16” .62” 1500 1-1/4” 28 Call

213-8 13/32” .74 1250 1-3/4” 28 Call

213-10 1/2” .83 1000 2-1/4” 28 Call

213-16H 7/8” 1.21 400 3-1/2” 20 Call

2” x 50’ w/Female Camlock Only ............Call for pricing2” x 50’ w/KC Nipple ...............................Call for pricing3” x 50’, Add Fittings ...............................Call for pricing

DH2x50DH2x50-KCLD300

Part Number I.D. O.D. Working Pressure Min. Bend Radius Vacuum Rating (in of Hg) Price

HOTAIR300 3” 3.55” 50 psi 7” 29” Call

We offer Gates Wire Braid Hydraulic Hoses – Call our Nacogdoches store at 800-895-2743 for details and pricing.

*Only the most popular selections are listed. Many others available. Hose prices fluctuate often, please call for details and current pricing.

o

il &

ga

s

For Orders: Phone 1.800.592.6940 / Fax 318.688.6487 / www.cspcatalog.com260

Hose clamPs

Part Number Inside Diameter Outside Diameter Band Width Clamps/Box PricePUP12 3” 2” 5/8 50 $2.75

PUP16 4” 3” 5/8 25 $3.25

PUP20 5” 4” 5/8 25 $3.75

PUP24 6” 5” 5/8 25 $4.25

PUP28 7” 6” 5/8 50 $4.95

PUP32 8” 7” 5/8 50 $6.75

PuncH-lok clamPs for camlock and HosesFor conveying hot air from compressors to tanks to bulk dry material. Original stainless steel pre-formed punch-type clamp is double-wrapped and formed to a given diameter. Ready for application. (Sold by each in full boxes)

PuncH-lok P-1000 loking toolThe original “Punch-Lok Tool” is made like no other tool! Designed for fast, economical application of punch-type clamps. The portable P-1000 weighs only 2-1/2 pounds. Drop forged and double plated tempered steel construction. Made in the USA.P1-A - For 5/8” Banding ....................................................$217.95 each

PuncH-lok Banding toolForged double plated tensioning tool with built in cutter for banding and buckle applications. Used with PB-206 (.75 x .030 x 100’) stainless steel unpunched Banding Material.

PB001 ...............................................................................$129.50 each

WHiP cHecks safety caBle, Hose to HoseCan be used in many applications such as Sandblast, Textile, Wire Air hose and more. Maximum working pressure: 200 psi.

WC-1B - 1/8” x 20” .............................................................. $4.95 each

WC-2B - 1/4” x 38” .............................................................. $9.95 each

8” Frac Tank Hoses available with threaded ends in various lengths.Call for current price.

Wormgear clamPsMeets SAEJ1508 which supersedes Mil Spec WW-C-440B. Four-piece construction. Screw design: 5/16” slotted hex head. SAE 201/301 Series Stainless Steel band and housing. Screw: SAE 1018 case-hardened, hex-free Chrome Zinc-Plated Steel.

From 2-4/64” to 3”, Width 1/2” ......................... $1.50 eachFrom 1-56/64” to 5”, Width 9/16 ....................... $1.95 eachFrom 3-40/64” to 6-32/34”, Width 9/16” ........... $2.50 each

238-HS40238-HS72238-HS96

oil &

ga

s


aluminum camlocksPart Number Size Price

female nPtx

male adaPter

200A-AL 2” $4.95

300A-AL 3” $6.25

400A-AL 4” $9.25

600A-AL 6” $17.50

Part Number Size Pricefemale

couPlerx

male nPt

200B-AL 2” $7.25

300B-AL 3” $12.25

400B-AL 4” $15.95


couPlerx

Hose sHank

200C-AL 2” $8.75

300C-AL 3” $12.95

400C-AL 4” $19.95

600C-AL 6” $43.75


couPlerx

female nPt

200D-AL 2” $7.75

300D-AL 3” $12.25

400D-AL 4” $16.95

Part Number Size Pricemale adaPter

xHose sHank

200E-AL 2” $5.50

300E-AL 3” $8.95

400E-AL 4” $14.95

Part Number Size Pricedust caP couPler

200DC-AL 2” $6.95

300DC-AL 3” $10.50

400DC-AL 4” $19.25

Part Number Size Pricedust Plug adaPter

200DP-AL 2” $4.50

300DP-AL 3” $5.50

400DP-AL 4” $8.50

*Brass Camlocks Available

o

il &

ga

s


camlock accessories

Part Number Description PricePTHBS20/25 For 2” – 2.5” Camlocks $4.25

PTHBS30/40/50 For 3”, 4” & 5” Camlocks $5.75

PHTBS6080 For 6”-8” Camlocks $25.95

camlock ear assemBlyHandle, Ring and Pin – Sold by each

Part Number Description PricePTB05 2” Camlock Gasket $0.60

PTB06 2-1/2” Camlock Gasket $0.60

PTB07 3” Camlock Gasket $0.75

PTB07-5/16 3” Camlock Gasket – Extra Thick $1.50


PTB08-5/16 4” Camlock Gasket – Extra Thick $1.75


camlock gasketsBuna N: Color Code Blue. Buna N is standard. It is generally recommended for petroleum derivates, neutral or slightly acidic salt solutions, alcohols, ethers, glycols, fats, oils and greases. This compound should give good service from -40°F to +250°F.

Oil and gas have played an important role throughout world history. Ancient cultures used crude oil as a substance for binding materials and as a sealant for waterproofing various surfaces. Five thousand years ago, the Summerians used asphalt to inlay mosaics in walls and floors. Mesopotamians used bitumen to line water canals, seal joints in wooden boats and to build roads. By 1500 B.C., techniques for lighting consisted of a censer or fire pan filled with oil made of a certain volatility so that it would burn slowly and not cause uncontrollable flames or explosions. Over time, the wick oil lamp replaced the fire pan using a flammable oil similar to today's kerosene lanterns.

The Chinese were the first to discover underground oil deposits in salt wells. The Chinese recognized early on the importance and potential use of oil and gas. Around 500 B.C., ancient Chinese history describes wells over 100 feet deep containing water and natural gas along the Tibetan border. The Chinese constructed extensive bamboo pipelines drawing from the wells in order to transport oil and natural gas, which was used for lighting. By 1500 A.D., the Chinese were exploring and digging wells more than 2,000 feet deep. The Romans used flaming containers of oil as weapons of war. The Romans also used oil surface deposits for burning lamps. The importance and significance in the use of oil and gas can clearly be seen dating back over thousands of years.

During the mid 13th century in what is now modern-day Azerbaijan, in the Persian city of Baku, inhabitants devised methods and collected from oil seeps in the surface. By the mid 1590's, shallow pits were dug at Baku to facilitate the collecting of oil. The hand-dug holes reached depths of up to 115 feet. The holes dug at Baku were in essence primitive oil wells, making Baku one of the first true oil fields. In 1650, Romania was the site of Europe's first commercial oil reservoir. This site was a major source of oil for Europe. More than 200 years later, Ploesti, Romania became the site of the world's first oil refinery.

The modern oil and gas industry was born in the late 19th century. In the early 1800's, merchants built damns that allowed oil to float to the waters' surface in an area within Western Pennsylvania called Oil Creek. A technique using blankets was employed placing blankets in the water, letting them soak with oil, and the oil was then retrieved by wringing out the blankets. The oil was sold for two dollars per gallon.

The invention of the kerosene lamp in the mid 1850's led to the establishment of the first U.S. oil company, the Pennsylvania Rock Oil Company. However, the first major oil company was the Standard Oil Company founded by John D. Rockefeller in 1870. Standard Oil built its first oil refinery in Pennsylvania, then later expanded its extensive operations nationwide. After a decade of fierce competition, Standard Oil became the industry's most dominant company controlling 80 percent of the distribution of all principal oil products, in particular kerosene.

In 1909 as a result of antitrust laws, federal courts ordered the break up of the Standard Oil Company dividing it up into 34 separate companies. Standard Oil dominated the first two decades of the oil and gas industry, and the U.S. accounted for more than half of the world's production until around 1950. As the industry became more global in nature, other world markets in Europe, Russia and Asia, began to play a much greater role. New industry giants emerged such as, Shell, Royal Dutch, and Anglo-Persian which later became British Petroleum.

~Article information by the Library of Congress

a Brief History of tHe oil and gas industry

oil &

ga

s


PiPe and Hose fittings

Part Number Size PriceAR – MAle ADAPTeR x FeMAle NPT

AR3040AL 3” Male Adapter to 4” Female NPT $28.95

AR4030AL 4” Male Adapter to 3” Female NPT $28.95

BR – FEmAlE CouplER x mAlE NpT

BR3020AL 3” Female Coupler x 2” Male NPT $28.95



DA – FeMAle COuPleR x MAle ADAPTeR

DA3020AL 3” Female Coupler x 2” Male Adapter $22.50





SA – SPOOl ADAPTeR

SA2030AL 2” Male Adapter to 3” Male Adapter $24.95

SA300-AL 3” Male Adapter to 3” Male Adapter $26.95



DD – FeMAle COuPleR x FeMAle COuPleR

DD200AL 2” Female Coupler x 2” Female Coupler $18.50



DD304OAL 3” Female Coupler x 4” Female Coupler $32.25



FR – MAle ADAPTeR x MAle NPT

FR3020AL 3” Male Adapter x 2” Male NPT $24.95



reducing adaPters and couPlers, aluminum

DABR

AR

SA

FRDD

o

il &

ga

s



Part Number Description PriceBL1121F050 1/2” Steel Coupling $1.25

BL1121F075 3/4” Steel Coupling $1.75

BL1121F200 2” Steel Coupling $19.95

BL1121F250 2-1/2” Steel Coupling $16.95



Black steel couPlings – scHedule 40

Part Number Description PriceBL1101F100 1” 90° Elbow $2.75

BL1101F200 2” 90° Elbow $6.95

BL1101F300 3” 90° Elbow $26.50

BL1101F400 4” 90° Elbow $94.50

BL1102F200 2” 45° Elbow $10.25

BL1102F300 3” 45° Elbow $75.50

Black steel elBoWs – scHedule 40

Part Number Description PriceBL1103F075 3/4” Steel “L” $3.75

BL1103F100 1” Steel “L” $5.95

BL1103F200 2” Steel “L” $9.95

BL1103F300 3” Steel “L” $68.95

Black steel street elBoW “l” – scHedule 40, male to female

Part Number Description PriceBL105F050 1/2” Black Steel $1.95

BL1105F075 3/4” Black Steel $2.75

BL1105F100 1” Black Steel $4.50

BL1105F150 1-1/2” Black Steel $12.50



BL1105F400 4” Black Steel $114.50

Black steel t’s – scHedule 40

Part Number Description PriceRSS25 2” Long Thin Strainer $13.95

RHS25 2” Round Hole Strainer $13.50



RSS35 3” Round Hole Strainer – long $34.95

*Other Strainers Available

strainers – cold-rolled steel-Plated

*Prices subject to change

oil &

ga

s


*Prices subject to change


Part Number Description PriceBL339F050X200 1/2” x 2” Steel Nipple $1.55

BL339F1/2X3 1/2” x 3” Steel Nipple $1.65

BL339F050X4 1/2” x 4” Steel Nipple $1.95


BL339F050XCL 1/2” x Close Steel Nipple $1.35

BL339F075XCL 3/4” x Close Steel Nipple $1.50


BL339F3/4X3 3/4” x 3” Steel Nipple $1.95






BL339F100XCL 1” x Close Steel Nipple $2.50

BL339F100X200 1” x 2” Steel Nipple $2.65



BL339F150XCL 1-1/2” x Close Steel Nipple $3.25


BL339F150X200 1-1/2” x 2” Steel Nipple $2.75

BL339F150X600 1-1/2” x 6” Steel Nipple $6.25





BL339F250XCL 2-1/2” x Close Steel Nipple $11.50









Black steel niPPles– scHedule 40

Part Number Description PriceDIST1 1/2” Hose Barb x 1/2” Male NPT $3.25

DIST10 1” Hose Barb x 1” Male NPT $4.95

DIST20 1-1/2” Hose Barb x 1-1/2” Male NPT $8.95


DIST30 2-1/2” Hose Barb x 2-1/2” Male NPT $18.95


Hose BarB to male nPt – kc niPPles

o

il &

ga

s



Part Number Description PriceBL339XH025X400 1/4” x 4” Steel Nipple $2.50

BL339XH050400 1/2” x 4” Steel Nipple $3.75

BL339XH200X400 2” x 4” Steel Nipple $18.25









Black steel niPPles– scHedule 80, Welded

Part Number Description PriceSW339200X050 2” x 1/2” Nipple Swage $27.95

SW339200X100 2” x 1” Nipple Swage $29.95




*Other Sizes Available

*Schedule 160 Swage Nipples Available

sWage niPPles – scHedule 40

Part Number Description PriceBL383F150X075 1-1/2” x 3/4” Hex Bushing $4.95

BL383F150X100 1-1/2” x 1” Hex Bushing $4.50

BL383F200X050 2” x 1/2” Hex Bushing $4.75

BL383F200X075 2” x 3/4” Hex Bushing $4.25

BL383F200X100 2” x 1” Hex Bushing $5.50

BL383F200X125 2” x 1-1/4” Hex Bushing $5.50








Black Hex BusHings – scHedule 40

Part Number Description PriceBL1205TH300 3” Flange – 150 psi $45.50

BL1205TH400 4” Flange – 150 psi $52.75

steel flanges – 150 lB rated

oil &

ga

s


floW Products

Part Number Size Price100-2A 2” - Figure 100 $44.95

100-3A 3” - Figure 100 $69.95

100-4A 4” - Figure 100 $86.95

100-6A 6” - Figure 100 $235.95

100-8A 8” - Figure 100 $439.95

intercHangeaBle Hammer unions – tHreaded, forged steel

Forged brass ball valves combine reliable operation with maximum economy. Metal handle, threaded ends, floating ball. 600 PSI NSCWP. Recommended for water, oil or gas.

Wafer Valve with aluminum bronze disc. Ideal butterfly valve for trucks, trailers, tanks, or anywhere a compact butterfly valve may be desirable. Designed with notches in the body, to guide flange bolts during installation, and to keep the valve aligned with the flange during use. A two piece stem allows for maximum flow values, and for repair of butterfly valve parts without special tools. Ductile Iron – Epoxy Coated, Buna Seat, 200 PSI NSCWP

Full line of Interchangeable Hammer unions Available.Call for more information

Part Number Size Price94A-101-01 1/4” Ball Valves $4.25

94A-102-01 3/8” Ball Valve $5.75

94A-103-01 1/2” Ball Valve $5.95

94A-104-01 3/4” Ball Valve $8.95

94A-105-01 1” Ball Valve $17.50

94A-106-01 1-1/4” Ball Valve $27.95

94A-107-01 1-1/2” Ball Valve $30.95

94A-108-01 2” Ball Valve $46.95

94A-110-01 3” Ball Valve $132.25

94A-112-01 4” Ball Valve $214.95

Ball ValVes

Part Number Size PriceBF3LNAD1BL 3” Butterfly Valve – Wafer $63.25

BF4LNAD1BL 4” Butterfly Valve – Wafer $88.95



Butterfly ValVes

Economical hammer union with precision machined metal-to-metal sealing surfaces. Recommended for water, oil or gas up to 1,000 PSI NSCWP. End connections are threaded, butt weld Schedule 80 (XH). Metal seated.

o

il &

ga

s


floW Products

• Class 125• 150 psi

Part Number Size PriceGV075 3/4” $9.95

GV100 1” $14.95

GV200 2” $39.95

GV300 3” $98.95

GV400 4” $172.75

Brass gate ValVes• WOG Non-Shock• Non Rising Stem

Part Number Size PriceSC075 3/4” $9.95

SC100 1” $14.50

SC200 2” $45.95

SC300 3” $139.95

SC400 4” $191.95

Brass cHeck ValVes – 125 lBs

clear PVc niPPle lock-toP filter socks

3” x 6” .................................................$69.00 each4” x 6” .................................................$89.00 each

200 Micron ............................................$7.95 each400 Micron ............................................$7.95 each600 Micron ............................................$7.95 each

PVC Beveled and Threaded on Both Ends

Lock-Top Filter Bags offer a plastic collar for better fit and easier disposal. For applications that require reinforced plastic seals or have certain disposal requirements. As an added feature, all seams and the collar are sonically welded, greatly enhancing filtration quality, reducing or eliminating leaks and bypass that may have occurred with sewn seams. Mesh

NIPPLE-10-CLEARNIPPLE-4X6-CLEAR

PEM-200-P2-POLPEM-400-P2-POLPEM-600-P2-POL

other useful Supplies For oil & Gas Are Available in other Sections of This Catalog:

Abrasives .......................................................................................................................................................167-173Confined Space Equipment .................................................................................................................................. 334Emergency Eyewash Stations ............................................................................................................................... 355Fall protection ...............................................................................................................................................328-334First Aid Kits & Cabinets ................................................................................................................................351-352FR Clothing .......................................................................................................................................................... 286Gloves ...........................................................................................................................................................315-323Hard Hats & Accessories ................................................................................................................................324-327Hazardous Material Handling ........................................................................................................................287-288Hearing protection: Ear plugs & Ear muffs .....................................................................................................310-314Lockout/Tagout .............................................................................................................................................335-338Respiratory protection ...................................................................................................................................297-299Safety Glasses & Goggles ...............................................................................................................................300-308Spill Kits & Sorbents ............................................................................................................................................ 363Tie Downs & Tow Straps ................................................................................................................................373-374Tools ..............................................................................................................................................................148-166Wheel Chocks ...................................................................................................................................................... 371

oil &

ga

s


frac tank suPPliessPlitter ValVe and “tees”

SplVlV 8” Splitter Valve..................................................$850.00 each41212 8” Tee .................................................................$975.00 each

domestic standard frac tank couPlings

HH-2 8” Domestic Wing Nut ......................................$160.00 eachHH-1SW 8” Domestic male Sub x Weld-on .....................$160.00 eachHH-4SW 8” Domestic Female Sub x Weld-on .................$179.95 each

HH-2 HH-1SW

HH-4SW

SPLVLV

41212

frac tank WrencH

FTW ................................................................................... $64.95 each

8” Frac Tank Hoses available with threaded ends in various lengths. Call for current price.

780375 w/VEE Head ............................................................................................................................................................................. $89.95 each780376 w/Roller Head ........................................................................................................................................................................ $136.95 eachVEE Head Assembly780305 .................................................................................................................................................................................................... $45.95 each

sumner fold-a-Jack• 2,500 lb (1,135 kg) capacity• Folds up for storage ease • Carrying handle for ease of transporting• 1” (2.5 cm) square tube base construction • Quick-action lock washer for quick height positioning • Patented Fall Guard™ feature allows 1” (25 mm) safety zone around lockwasher • 1-1/2” (38 mm) Acme fine adjustment thread – the largest in the industry • Large, convenient adjustment handle • Set screw for double margin of safety • Set screw can lock jack head to stand for secure transportation• Jack independently load tested for quality assurance • CE rated • Backed by over forty years of jack stand manufacturing experience781300 ...............................................................................$99.95 each

sumner Pro Jack• Formed steel legs • 2,000 lb (900 kg) capacity • Priced for all budgets • Strut tension plate for superior lateral support• Quick-action lock washer for fast height positioning • Patented Fall Guard™ feature allows 1” (2.5 cm) safety zone around lock washer • 1-1/2” (38 mm) Acme fine adjustment thread – the largest in the industry • Large, convenient adjustment handle • Set screw for double margin of safety • Set screw can lock jack head to stand for secure transportation• Jack independently load tested for quality assurance • CE rated • Backed by over forty years of jack stand manufacturing experience

sumner HeaVy duty Jack

780471 .............................................................................. $98.95 each

• 2,500 lb (1,135 Kg) capacity• 3,500 lb (1,580 kg) capacity for Heavy Duty Plus Jack• Strut tension plate for superior lateral support• 1” (2.5 cm) square tube base construction• Built for heavy use & abuse• Quick-action lock washer for fast height positioning• Patented Fall Guard™ feature allows 1” (25 mm) safety zone around lock washer• 1-1/2” (38 mm) Acme fine adjustment thread – the largest in the industry• Large, convenient adjustment handle• Set screw for double margin of safety• Set screw can lock jack head to stand for transportation – no loose pieces• Jack independently load tested for quality assurance• CE rated• Backed by over forty years of jack stand manufacturing experience

o

il &

ga

s


gas detectors

sgc docking station

gas cliP tecHnologies single gas monitors

gas cliP tecHnologies multi-gas cliP

All in one docking station designed for maximum testing efficiency and portability. Housed in a rugged Pelican© case with robust USB memory, this station will be able to accurately test and record all monitor data while reducing the testing time and gas usage.• Test 4 units at one time, up to 12 instruments in a minute• Easy 1 button operation• Robust rechargeable internal battery, hundreds of tests before recharging• Internal gas cylinder regulator and pressure gauge• 2 GB USB memory for bump test and event log storage• Optional unit configuration and firmware updates via GCT Manager Software• Rugged Pelican© case• No computer required to operate

With unmatched sensor reliability and adjustable alarm set points, the Gas Clip H2S monitor features real-time gas reading capability and a 50% larger battery capacity. Unit tests full function self-test on activation and every 20 hours; continuous automatic battery and sensor tests. Optional two-way IR comms for event downloads, bump tests & updates.

SGC-DoCK .......................................................................................................................................................................................... $1,895.95 each

Co Gas monitor ...................................................................................................................................................................$159.95 eachH2S Gas monitor, Yellow ......................................................................................................................................................$159.95 eachH2S Gas monitor w/Hibernate Feature ........................................................................................................................... $185.95 each

orange 4 Gas monitor only, Infrared Sensor ...................................................................................................... $699.95 eachorange 4 Gas monitor only, with pellistor Sensor, 25 Hour Run Time ................................................................ $575.95 eachorange 4 Gas monitor w/pump ...................................................................................................................... $1,095.00 eachCalibration Cap .................................................................................................................................................... $10.00 eachConfined Space Kit w/58 l Quad Gas ................................................................................................................. $615.00 each12V Vehicle Charger ............................................................................................................................................. $29.95 eachDocking Station .............................................................................................................................................. $1,995.00 each

Designed and tested to provide worker safety in the harshest working conditions. Each and every portable gas detector is tested 100% of the time, not just a random sample of units. 2 Year Monitor• Unmatched sensor reliability for H2S, CO, & O2• Adjustable alarm set points and real-time gas reading capability• 50% larger battery capacity• ppm resolution for H2S sensor and display• Two-way IR communication for event downloads, bump tests & updates• Programmable unit identification• Calibration optional• “Bump check” confirmation/identification

Battery life for months instead of hours. Tests for the presence of combustible gases, H2S, CO, and O2. Multi Gas Clip (MGC) has the longest battery life of any portable gas detector. The MGC can go a full 2 months without a charge, even without ever having to be turned off. Shut down the unit nightly and the battery can last up to 4 months. Clip-On. The MGC also eliminates the need to frequently calibrate portable gas detectors. It can go 6 months without being calibrated.

• 2 month battery life (continuous run time)• 6 month calibration cycle• Will work in inert environments, no need for oxygen• Simple to use• Bump/Calibration reminders• Docking station compatible• Programmable user ID

SGC-CSGC-HSGC-pluS

mGCmGC-pmGC-pump-IRmGC-CAlCApmGC-CSmGC-V-CHARGER1mGC-DoCK

mGC-DoCK

SGC-pluS

mGC-pump-IR

SGC-H

*Calibration Gas and the full line of accessories are available. Call for details and pricing.

oil &

ga

s


gas detectors

msa altair® 4x multigas detector

msa 25’ clear tuBing msa regulator for test gas Bottle

The ALTAIR® 4X Multigas Detector surpasses industry standards in several crucial areas. Its four-year sensor life is 60% longer than the industry average, while its 24-hour run time exceeds the industry average by 71%. This versatile portable detector is a perfect match for industries ranging from fire fighting to welding, and its digital sensor output makes it less likely to suffer from RF interference. The unit features exclusive MotionAlert™, which lets others know if the user has become immobile, and InstantAlert™, a manual alarm that alerts others of potentially dangerous situations. This rugged unit is designed to withstand a drop of up to 20 feet and uses less than half as much calibration gas as the industry average.

• For monitor testing • For ALTAIR Maintenance Free Single-Gas Detector

ALTAIR-4X - 4X Monitor Only ................................................................................................................................................................. $940.00 eachAlTAIR-4x-KIT - 4x monitor w/Kit (Co, o2, H2S, lEl Calibration Kit) .....................................................................................................$2,350.00 each10048280 - Calibration Check Gas .......................................................................................................................................................... $285.00 each

KIT Description: Single-case Solution for calibrating MSA gas sensors and gas detectors. Lightweight, rugged, and easy to transport and store.

BW tecHnologies H2s monitors

BW tecHnologies gasalert microcliP xt

Designed with durability and comfort in mind, the GasAlert Extreme reliably monitors for any single gas hazard within its range of available toxic gas models. With easy on/off operation, this single gas detector offers extended longevity with a two year field replaceable battery and sensor. Calibration is a simple automatic procedure and is compatible with BW Technologies by Honeywell’s MicroDock II automatic test and calibration system. A wide range of user options, multi-language display and datalogging functionality make the GasAlert Extreme an ideal solution for many applications.

GA24xTH ............................................................................................................................................................................................... $159.95 each

Yellow 4 Gas monitor .......................................................................................................................................$699.95 each

10030325 .......................................................................... $12.00 each 467895 .............................................................................$195.00 each

• Direct, real-time readings on large LCD• Operates through consecutive shifts – exceptional battery run-time• Secure and accurate history with datalogging option• Full function self-test of sensor, battery status, circuit integrity and audible/visual alarms on start up• Bright wide-angled visual alarm bars• Built-in concussion-proof boot• Water-resistant

Detects Hydrogen Sulphide, Carbon Monoxide, Oxygen and combustibles (%LEL). Designed for use in tough environments. IP 66/67 rating and built-in concussion-proof boot. Loud audible, visual and vibrational alarms for use in high noise locations. Easy use with minimal training. Simple one button operation, intuitive interface and continuous LCD showing real-time gas concentrations. Lithium polymer battery provides long run time (10 hours), whilst benchmark sensors ensure accurate, high-performance detection of flammable, toxic and Oxygen gas hazards. Works with BW Technologies by Honeywell’s MicroDock II automatic test and calibration system. Device offers a variety of user defined options including; Auto zero on start up, Oxygen auto calibration on start up, force bump test when overdue and the choice of 5 languages

• Dependable multigas detector tests for LEL, oxygen, carbon monoxide and hydrogen sulfide• Economical construction saves users more than 50% on calibration gas, replacement sensors and maintenance• Four-year sensor life means detector lasts 60% longer than the industry average• Unit uses 50% less calibration gas per minute than the average detectors within the industry• Two-tox CO/H2S sensor removes practically all cross-channel interference• Large buttons and high-contrast screen make operation easy in low-light conditions• Ribbed rubber housing provides secure grip and high durability• Unit features 95+ db alarm and ultra-bright LEDs• Exclusive end-of-sensor warning cautions user when unit’s sensor needs to be changed• MotionAlert option tells others that user has become immobile• InstantAlert provides manual alarm to alert others of a dangerous situation

MC2-XWHM-Y-NA

o

il &

ga

s


gas detection & testing suPPlies

PH test striPs9590-0001 ......................................................................... $29.95 each0-14 ColorpHast – 100 Strips per Poly Box

Hydrometers

rae colorimetric gas detection tuBes and PumP

A hydrometer is an instrument used to measure the specific gravity (or relative density) of liquids; that is, the ratio of the density of the liquid to the density of the water. Made of glass, these hydrometers consist of a cylindrical stem and a weighted bulb to make it float upright.

Perform quick, on-the-spot measurement of specific toxic and combustible substances with this traditional, low-cost solution. The hand pump features a spring-less piston to accurately draw 50 and 100cc samples. The single-use colorimetric gas detection tubes change color in direct correlation to the concentration of gas present. No calibration is required, and the ergonomic pump can be used even with multiple layers of gloves. 10 tubes per pack.

11522A 7” Hydrometer – Scale 1.000 to 1.250 ............. $69.95 each1160425B Hydrometer Carry Case ................................... $99.95 each085725E Graduated Cylinder – Nalgene 250 ml ............. $59.95 each

11522A 1160425B 085725E

*All types of Hydrometers Available. Call for more information.

kolor kut gasoline gauging and Water finding PasteKolor Kut’s pink paste turns to red upon contact with gasoline, jet fuels, crude oil, kerosene, diesel and some hydrocarbon-based solvents.KK01 - 3 oz Tube for Water1-11 ..................................................................................... $4.50 each12+ ...................................................................................... $4.15 eachKK02 - 2.25 oz Jar for Gasoline1-11 ..................................................................................... $4.85 each12+ ...................................................................................... $4.50 each

Part Number Parameter Std Range of Measurement Price/Pack

RAE-10-103-06 Hydrogen Sulfide 1-7 ppmv $39.75

RAE-10-103-10 Hydrogen Sulfide 2.5-60 ppmv $39.75





RAE-10-103-40 Hydrogen Sulfide 0.1-2% $39.75

RAE-10-103-50 Hydrogen Sulfide 2-40% $39.75

RAE-10-104-50 Carbon Dioxide 1-20% $39.75

*RAE-10-109-20 Nitrogen Oxide 1-50 ppmv $39.75

RAE-10-117-10 Nitrogen Dioxide 0.5-30 ppmv $39.75

RAE-10-120-10 Water Vapor 2-10 lbs/MMCF $39.75

RAE-10-120-20 Water Vapor 6-40 lbs/MMCF $39.75

RAE-010-0001-000 Sniffer Set, Hand Pump $225.00

*Contains 5 Colorimetric Tubes and 5 Pre-Tubes for a total of 5 Measurements.

Full line of RAe Tubes available. Call for details on any not listed here

gasoila Water finding Paste

WT25................................................................................... $4.95 each12+ ...................................................................................... $3.85 each

• Nominal blade thickness .019”• Extra large winding drum provides rapid line recovery• Special hook ring with ribbed face at zero• Leather thong is provided to use through eye at rear

oil &

ga

s


lufkin atlas® cHrome clad® / nuBian® douBle duty oil gauging taPes

lufkin gauging taPes

Part Number Size Graduations PriceCN1290SF590 1/2” x 25’ Instantaneous feet and Inches to 1/8ths $117.95

CN1293SF/590 1/2” x 50’ Instantaneous feet and inches to 1/8ths $132.95

CN1294SF590 1/2” x 66’ Instantaneous feet and inches to 1/8ths $165.95

taPes

*Other Atlas Chrome Clad® / Nubian® Double Duty Tapes Available.

Part Number Size Fits Tape PriceOCN1290SF590 1/2” x 25’ CN1290SF590 $57.25

OCN1293SF/590 1/2” x 50’ CN1293SF/590 $73.95

OCN1294SF590 1/2” x 66’ CN1294SF590 $102.95

refills

*Other Atlas Chrome Clad® / Nubian® Double Duty Refills Available.

lufkin atlas® nuBian® oil gauging taPes

Part Number Size Graduations Price1290SF590 1/2” x 25’ Instantaneous feet and Inches to 1/8ths $125.75

O1290SF590 1/2” x 25’ Refill for 1290SF590 $65.95

• Chrome Clad® for dark (heavy oils)• Nubian® for light (clear oils)• Made of heavy gauge 1/2” (13mm x .012” (0.33mm) steel• Black markings bonded to steel recessed beneath multiple layers of nickel• Chrome electroplating provides greater resistance to wear and corrosion• All tapes read right to left• Heavy-duty frame designed for years of rugged use• All frames include a grounding strap• Two arm reels for short lengths• Snap-swivel hook on front end of tape for a plumb bob (sold separately)• Plumb bob must be ordered separately: The last part of the part number indicates the style of the plumb bob the tape is made to accept.

• Ideal for gauging clear oils• Etched background• Blade protected by flowed-on epoxy coating• Raised bright steel markings are clearly legible• All tapes read right to left• Heavy-duty frame designed for years of rugged use• All frames include a grounding strap• Plumb bob must be ordered separately

C2276D 1/4” x 100’ Chrome Clad ® blade, E1 Blade Style ............................................................................................................... $247.50 eachC2276mE 1/4” (6mm) x 100’ (30m) Chrome Clad ® blade, E2 Blade Style .......................................................................................... $312.95 eachoC2276D 1/4” x 100’ Refill Blade for C2276D .................................................................................................................................... $213.95 eachoC2276mE 1/4” (6mm) x 100’ (30m) Refill Blade for C2276mE ............................................................................................................ $226.95 each

lufkin derrick cHrome clad® taPes• Nominal blade thickness .019”• Extra large winding drum provides rapid line recovery• Special hook ring with ribbed face at zero• Leather thong is provided to use through eye at rear

590 Inage bob; cylindrical shape, 1” x 6-3/4”, tapered point tip ...................................................................................................... $34.95 each590G Graduated in inches to 1/8ths, blunt point ............................................................................................................................... $45.95 each590Gm Graduated millimeters with centimeters numbered, tapered point tip ..................................................................................... $49.95 each* Metric and english Available

lufkin PlumB BoBs20 oz, Solid Brass -- For use in heavy oils

590Gm590 590G

o

il &

ga

s


u.s. taPe gauging suPPlies

u.s. taPe derrick taPeDerrick Tapes feature a plastic yellow safety handle, long crank arm to speed retraction, and corrosion resistant frame. Made in USA

Double Duty Gauging tapes have a chrome plated blade with a black strip along the bottom edge making it useful for working with both dark and light oils/liquids. The coating on the blade helps reduce the wear caused by harsh chemicals and tough working conditions. Complete tapes under 75’ are housed in the small frame. Made in USA.

Plated Gauging tapes are ideal for use in dark oils or liquids. The coating on the blade makes them corrosion and wear resistant for use in harsh environments. Complete tapes under 75’ are housed in the small frame. Made in USA.

little Joe® gauge line WiPer“Little Joe” ® Line Wipers have proven the best solution for avoiding problems and keeping your oil gauging tapes in great shape. Built with rugged die cast aluminum alloy, “Little Joe” ® Line Wipers have been serving the oil level gauging industry since 1955.

LITTLE JOE ..........................................................................$16.95 each

u.s. taPe douBle duty gauging taPes u.s. taPe Plated gauging taPes

Line Wiper ............................................................. $14.95 each

u.s. taPe line WiPers

u.s. taPe PlumB BoBs

Cleans tape as you roll it up. (Compares to Little Joe)

1/2” X 25’ Tape ................................................ $99.95 each1/2” x 25’ Refill ................................................ $54.95 each1/2” x 50’ Tape .............................................. $119.95 each1/2” x 50’ Refill ................................................ $69.95 each

20 oz Brass, English ............................ $33.25 each20 oz Brass, Metric ............................ $46.95 each

1/4” x 100’ Tape .................................................$239.95 each1/4” x 100’ Refill ................................................$189.95 each

1/2” X 25’ Tape .............................................. $112.25 each1/2” x 25’ Refill ................................................ $59.95 each1/2” x 50’ Tape .............................................. $132.50 each1/2” x 50’ Refill ................................................ $82.50 each

58814589145882058920

5889958891

5962559725

58813589135881958919

u.S. Tape oil Gauging and Derrick tapes are strong and durable with a corrosion resistant frame. The frames feature a safety yel-low plastic handle and longer crank arm to speed retraction (oil gauges come with grounding wire and clip).

oil Gauging tape blades come in different blade styles and lengths for different needs and refills are compatible with competitors frames. The 3 rivet end assembly makes them durable and dependable. Derrick, Plated, Double Duty, and Black Etched blades have an abrasion and chemical resistant coating.

u.S. Tape oil Gauging and Derrick tapes meet or exceed the requirements of the American petroleum Institute. NIST certification is available.

58877

*Only the most popular selections are listed. Full line of u.S. Tape products available.

Call for details and pricing.

Wooden tank gage sticks

GS - 6 = 6’ ...............................................$13.95 eachGS - 8 = 8’ ..............................................$13.95 eachGS - 14 = 14’ ...........................................$34.50 each

oil &

ga

s


3M Scotchkote Liquid Epoxy Coatings 323 is a two-part system designed to protect steel pipe and other metal surfaces from the harsh affects of corrosion. Available in Quart and Gallon Kits.

3m scotcHkote 323

PiPeline coatings

3m17574 - Quart Kit .......................................................Call for pricing

3M Scotchkote Hot Melt Patch Compound 226P is a heat bondable polymeric coating in stick form designed for plant and field repair of Scotchkote Fusion Bonded Epoxy coatings. Scotchkote Hot Melt Patch Compound 226P is ideal for repairing minor pinholes and abrasions.

3m scotcHkote Hot melt PatcH comPound 226P

3M226P - 5 lb Box .............................................................$194.50 eachdenso Protal 7200Denso Protal 7200 is a fast cure, high build pipeline coating. It is VOC free, 100% solids epoxy coating specially formulated to compliment FBE coated pipe. It is a high build liquid coating that is brush or spray applied in one coat in the field or shop. It cures very fast to allow quick handling and backfill times. Used for protection of girth welds, tie-ins, welds for boring applications, station piping, fittings, fabrications and rehabilitation of existing pipelines.

Denso-7200 Denso Coating .....................................Call for pricingDenso-AP Applicator Pads ...................................Call for pricingDenso-Hardner Hardener for Denso Protal ...................Call for pricing

PoWercrete J

ocr modified lead-free tHread comPound

Powercrete J is a two-part epoxy polymer coating designed for use on bare steel pipeline girth welds, as well as the rehabilitation of existing pipelines. Due to its excellent corrosion, mechanical, and abrasion properties, Powercrete J is the corrosion coating of choice for pipelines operating up to 130◦ (55◦ C).

306 OCR Modified is a superior thread compound for casing, tubing, and line pipe that meets the performance requirements of API RP 5A3/ISO 13678. 306 OCR Modified was researched and field-tested long before others were on the drawing board. Having the same appearance, consistency and sealing properties of API thread compounds, 306 OCR Modified is used with excellent results during hydrostatic testing, and in downhole service. It contains corrosion and H2S inhibitors to eliminate thread corrosion and pitting. The component materials used in the manufacture of 306 OCR Modified meet or exceed performance objectives stated for API thread compounds.

PowercreteJ-2 2 lb Kit ........................................Call for pricingPowercreteJ-4 4 lb Kit ........................................Call for pricingPowercreteJ-4-BPART 4 lb Part B Only ...........................Call for pricing

18 lbs.....................................................................................................................................................$67.95 each

rd-6 coating system (Polyguard)Polyguard RD-6 Coating System consists of a geotextile backed protective pipeline coating applied over a companion liquid adhesive and a slip-plane outerwrap. Corrosion protection comes from a rubberized bitumen coating. Bonded to the outside surface of this coating is a strong, tightly woven, polypropylene geotextile, which provides non-shielding properties plus exceptional strength. It is suitable for use with pipeline external surface temperatures not exceeding 145◦ (63◦ C). RD-6 has been used since 1988, with extraordinary results for effective corrosion protection all through the intervening years.RD-6 4” x 50’ Roll ...................................................Call for pricingRD-6-6 6” x 50’ Roll ....................................................Call for pricing

306

3m scotcHraP 50 All-Weather Corrosion Protection TapeThis 10 mil polyvinyl chloride (PVC) tape with a high-tach adhesive provides a corrosion and impact resistant seal for all-weather protection of metal piping systems above and below ground. Scotchrap has excellent UV resistance and a temperature rating of 176◦ (80◦ C). 3M Scotchrap 50 tape performs over a wide temperature range and is resistant to impact, abrasion and punctures. *NOTe 3M Scotchrap Primer should be used with all corrosion protection tapes. *Primers available for above coatings and epoxies.

2” x 100’ Unprinted 10/cs ................................$16.95 per roll4” x 100’ Unprinted 12/cs ..............................$34.95 per roll

3M00013 3M10646

o

il &

ga

s


• American pattern half round pipeliner file, bastard cut • Used on concave, convex and flat surfaces • Rounded on 1 side, flat on opposite • Back is single cut • Flat side is single cut

nicHolson Half round PiPeliner file

PiPeline construction suPPlies

05190 14” Half Round Pipeliner File .................................$49.95 each

mr. Heater all PurPose ProPane torcH31” Total length - 400,000 BTU’s of power with a 10’ hose assembly. Needle valve adjustment allows accurate fuel regulation for flame control. Lightweight and easy to use. Comfortable, ergonomic handle grip. P.O.L. fitting allows attachment to any propane cylinder. For outdoor use only.

F272601 .............................................................................$59.95 each mg9 maP-Pro™ Hand torcH cylinder Higher burn temperature and heat transfer than standard propane. The Bernzomatic MAP-Pro™ Hand Torch Cylinder contains premium fuel suited for a variety of job site projects including soldering large copper pipes, brazing and heat treating. Constructed of durable steel, the slim, lightweight cylinder is easy to grip and maneuver. Flame temperature in air is 3,730 degrees Fahrenheit.

14.1 oz Cylinder .............................................. $9.95 each

tx-9 ProPane Hand torcH cylinder The Propane Hand Torch Cylinder is designed to fuel standard hand torches in order to complete jobs such as light soldering, softening putty and paint, removing rusty bolts and nuts, and thawing frozen locks. Constructed of durable steel, the slim, lightweight cylinder is easy to grip and maneuver. Flame temperature in air is 3,600 degrees Fahrenheit.

14.1 oz Cylinder ....................................$6.95 each

Bernzomatic ul100 solid Brass torcH – Pencil torcH• Adjustable flame control knob for ease in switching between different applications • Solid brass burn tube for durability • Ignites with a sparker for dependable ignition • Standard pencil flame

BRNZ19900 .........................................................................$25.95 each

Bernzomatic ts4000 trigger start torcH• Swirl flame provides a hotter, more efficient flame • Instant on/off trigger igniter with simple one- handed operation • Lock button keeps torch lit for finger-free use • Cast aluminum body for durability

BRNZTS4000 .......................................................................$49.95 each

Bernzomatic ts3000t Quick fire self-igniting torcH• Adjustable flame control knob for ease in switching between different applications • Instant-on trigger igniter for easy lighting • General purpose flame

BRNZTS3000 .......................................................................$32.95 each

Black stallion fire BlanketsFor applications with heavy sparks, spatter and slag.

B-WFG18-6x6 6’ x 6’ ................................................... $25.95 eachB-WFG18-6x8 6’ x 8’ ................................................... $34.95 eachB-WFG18-10x10 10’ x 10’ ................................................ $78.95 each

B-NFG24-8x10 8’ x 10’ ................................................. $95.50 each

18 oz - White Fiberglass

24 oz – Gold Fiberglass

BRNZ-MAPPBRNZ-PROPANE

oil &

ga

s


irWin cast aluminum PiPe WrencHes• Heavy-duty cast aluminum housing is 40% lighter than cast iron and easier to maneuver• I-Beam handle and wide design provides better weight distribution• Drop-forged jaw is heat-treated to resist distortion or breakage• Easy-spin adjusting nut is heat-treated for durability• Hammer head design provides a flat surface for hammering• Features a Lifetime Guarantee

2074112 12” .......................................................................................................................................................................................... $50.95 each 2074114 14” .......................................................................................................................................................................................... $52.50 each2074118 18” .......................................................................................................................................................................................... $66.50 each2074124 24” .........................................................................................................................................................................................$103.25 each2074136 36” .........................................................................................................................................................................................$167.25 each

PiPeline construction suPPlies

irWin cast iron PiPe WrencHes• Constructed from the highest grade cast iron, forged and heat treated to ensure maximum durability.• Unique hammer head design provides a flat surface for hammering• Easy-spin adjusting nut is heat-treated for durability• Wide I-beam handle design provides better weight distribution• Drop-forged jaw is heat-treated to resist distortion or breakage• Hardened teeth provide tremendous bite• Housing constructed of heavy-duty cast iron274105 8” ............................................................................................................................................................................................. $21.95 each274101 10” ............................................................................................................................................................................................ $22.50 each274106 12” ............................................................................................................................................................................................ $28.75 each274102 14” ............................................................................................................................................................................................ $29.50 each274103 18” ............................................................................................................................................................................................ $37.00 each274104 24” ............................................................................................................................................................................................ $53.25 each274107 36” ...........................................................................................................................................................................................$109.50 each274108 48” ...........................................................................................................................................................................................$164.25 each

seymour fence Pliers

2T-1900 ............................................................................ $16.75 each

Multi-purpose fence pliers are 10-1/2” alloy steel and feature a forged steel handle.

crescent HeaVy-duty fence tool Pliers

193610CVSMN ................................................................. $27.25 each

PiPe stands

PS412 ................................................................................ $69.95 each

• Should not be used to hammer hardened materials• 2 staple grips in nose• Corrugated hammer head with heavy prong to easily reach and pull rusty staples• Special opening in head allows both wire and staple to be gripped• 2 electronically induction hardened durable wire cutters• Made of forged alloy tool steel• Polished head• Stretches wire tight before fastening• 10-7/16” Length

• Medium Pipe Stand, to support pipe lengths with a diameter of 4” - 12” • Measures 9” high, 3/8” thick • Polyethylene • Crush tested at the Alberta Research Council

ringers rougHneck gloVes• TPR impact protection on top of hand and full length of fingers• High Visibility for Increased Safety• CE Rated 4232, Level 2 Cut and Puncture Resistance• TefLoc Grip System on Palm & Fingers Resists Oil & Enhances Grip• Extended Neoprene Wrist Closure with SuperCuff Technology276-08 Small ...........................................................$34.95 pair276-09 Medium .......................................................$34.95 pair276-10 Large ............................................................$34.95 pair276-11 X-Large.........................................................$34.95 pair276-12 XX-Large ......................................................$34.95 pair

o

il &

ga

s


model 535 tHreading macHineThe Model 535 maintains the ruggedness of the industry workhorse, while adding the features that makes the threading operation more productive. A large chip tray and oil reservoir make the 535 ideal for longer uninterrupted threading. The 535 features a high clearance carriage, making the threading operation easier, and a generous top cover area that is ideal for keeping tools and work related materials handy. The 535 is designed around maximum uptime with the upgrades that matter most to the pipe working professional. Users also benefit from the part commonality between the 535, the 535A Automatic and other RIDGID equipment.

RID93287 1/2”-2” NpT w/850 Cutter, 36 Rpm, 115v ...........................................................................................................Call For Current Pricing

RID94432 Top Cover Assembly ...........................................................................................................................................Call For Current Pricing

ridgid tools

Complete line of RIDGID tools available:Hand Threaders, Dies & Die Heads, Cutter Wheels, etc.

See Tools Section for Additional Products

*Please contact one of our Sales Professionals for current pricing.

Features:• Large 1.75 gallon oil tray.• 100% larger chip tray.• Generous top cover for keeping tools and fittings handy.• High clearance carriage.• Speed chuck with rocker-action jaws centers and grips work piece instantly.• Can be used with geared threaders Models 141 and 161.• Uses Model 816/817 semiautomatic, Model 815A self-opening or Model 811A quick-opening die heads.• Length gauge for quick, accurate cut-off.• Approved by CSA to CSA and UL standards.

Specifications:• Pipe Capacity: 1/8”-2” (3mm-50mm) 2 1/2”-4” (62mm-100mm), 4”-6” (100mm-150mm) with 141 and 161 geared threaders.• Bolt Capacity: 1/4”-2” (6mm-50mm).• Motor: 1/2 HP, single-phase, 115V, 50/60 Hz, 15 amp reversible universal motor. (36 RPM)• Switches: FOR/OFF/REV and Integral safety foot switch.• Chuck: Speed Chuck™ with replaceable rocker-action jaw inserts (3).• Rear Centering Device: Cam-action, turns with chuck.• Cutters: self-centering, full-floating. • Spindle Speed: 36 RPM standard (no load), 54 RPM model also available (Call for details).• Reamer: 5-flute cone, RH, 1/8”-2” (3mm-50mm).• Oil Pump: Self-priming gerotor oil pump.• RH/LH combination reamer available.

Standard Equipment:• One No. 811A universal, quick-opening die head.• One set 1/2”-3/4” universal alloy dies.• One set 1”-2” universal alloy dies.• One No. 820 cutter.• One No. 341 reamer.• One gallon of premium extreme performance thread cutting oil.• Four hex wrenches. • One spare E-1032 cutter wheel.

oil &

ga

s


RIDGID pipe Wrenches are world-renowned for their unsurpassed toughness and serviceability. The original heavy-duty pipe wrench has earned the confidence of pipe professionals for over 80 years because it does the job right the first time. RIDGID pipe Wrenches are also available in a wide variety of purpose-built configurations, in cast-iron and aluminum for lighter weight.

ridgid PiPe WrencHes

ridgid tools

HeaVy-duty PiPe cutters

RID32820 - 2A HD 1/8”- 2” ................................................................$195.95 eachRID32830 - 3S HD 1”- 3” ...................................................................$338.50 eachRID32840 - 4S HD 2”- 4” ...................................................................$509.50 eachRID32850 - 6S HD 4”- 6” ...................................................................$717.25 each

model 700 Hand PoWer driVe

RID41935 1/8” 2” Capacity - 115v ..................................................$1,975.00 each

RID31010 10” ........................................................................................ $28.95 eachRID31015 12” ........................................................................................ $33.25 eachRID31020 14” ........................................................................................ $36.95 eachRID31025 18” ........................................................................................ $53.75 eachRID31030 24” ........................................................................................ $84.95 eachRID31035 36” ...................................................................................... $182.50 eachRID31040 48” ...................................................................................... $280.50 eachRID31045 60” ...................................................................................... $416.75 each

cast-iron PiPe WrencHes

RID31090 10” ........................................................................................ $44.75 eachRID47057 12” ........................................................................................ $53.95 eachRID31095 14” ........................................................................................ $59.95 eachRID31100 18” ........................................................................................ $75.50 eachRID31105 24” ...................................................................................... $120.50 eachRID31110 36” ...................................................................................... $215.25 eachRID31115 48” ...................................................................................... $421.95 each

cast-aluminum PiPe WrencHes

• Swirl flame provides a hotter, more efficient fast, clean pipe cutting by hand or power.• Extra-long shank protects adjustment threads, while an extra-large handle is provided for quick, easy adjustment.• Can be converted to 3-wheel cutter by replacing rollers with cutter wheel, or the 2A and 4S can be ordered as 3-wheel model for use in areas where a complete turn is not possible.• Second handle on 3-S, 4-S and 6-S makes two-man leverage possible on large pipe sizes.

• Swirl flame provides a hotter, more efficient fast, clean pipe cutting by hand or power.• Extra-long shank protects adjustment threads, while an extra-large handle is provided for quick, easy adjustment.• Can be converted to 3-wheel cutter by replacing rollers with cutter wheel, or the 2A and 4S can be ordered as 3-wheel model for use in areas where a complete turn is not possible.• Second handle on 3-S, 4-S and 6-S makes two-man leverage possible on large pipe sizes.

o

il &

ga

s


For more than 140 years, the Marsh Bellofram name has been synonymous with the design, manufacture and supply of the highest quality pressure gauges and thermometers, with a portfolio that has developed into the most comprehensive gauge line in the world. Marsh Instruments pressure gauges are used in countless applications where accuracy, dependability and durability are essential. Whether a standard or a specially designed pressure gauge, Marsh Bellofram stands ready to provide a highly rugged precision instrument, adaptable to wherever pressure or temperature measurements are required.

marsH Bellofram gauges

Pressure gauges

63mm Severe Service GaugesMarsh Bellofram 63 mm liquid filled severe service gauges are expressly designed to provide reliable pressure measurements in harsh and demanding industrial and OEM environments, particularly where pulsation and vibration are a concern. High pressure ranges offer a Helical Bourdon Tube for longer gauge life and increased durability.The gauges are filled with glycerin to offer a dampening effect, while reducing pointer flutter, as well as offering significant shock reduction to instrument-grade components. They also lubricate internal components, effectively reducing risk of corrosion. These all stainless steel liquid-filled gauges feature a ventable top fill plug for pressure relief and ease of venting after installation. They can be mounted on either a horizontal or vertical plane. Units are hermetically sealed for reliable operation in harsh or dirty environments, while reducing the chance of leaks and ease of refilling in the field.

• Glycerin filled• Three standard mounting options: LM, CB and U-Clamp• Copper alloy internal components• Available pressure ranges to 10,000 psi (Call for prices and information)• Helical Bourdon Tube• Hermetically sealed

Part Number Connection Range PriceJ7612P 1/4 NPT 30” Hg VAC to 30 psi $21.95

J7648P 1/4 NPT 0 to 100 psi $19.95

J7658P 1/4 NPT 0 to 300 psi $19.95

General Service GaugesMarsh Bellofram general service steel case gauges are cost-effective, general purpose instruments, designed for reliable pressure measurements and suitable for use with water, oil, air, gas or other noncorrosive media. Note: The gauges are available in five different dial sizes, and offer highly repeatable pressure measurements from vacuum/compound through 5,000 psi – Call for more information on gauges not listed here.

Part Number Size Thread location Scale Standard Connection Range PriceJ5046 2-1/2” Center Back psi/kPa 1/8 NPT 0 to 60 psi $13.95

J5048 2-1/2” Center Back psi/kPa 1/8 NPT 0 to 100 psi $13.95

oil &

ga

s


Vacuum truck suPPlies

Part Number Size/Style Price130-10 1-1/4” Compression Fitting $7.95

130-15 1-1/2” Compression Fitting $8.25

130-20 2” Compression Fitting $8.50

NIPPLE-10-CLEAR 3” x 10” Beveled, Threaded Nipple $69.00

NIPPLE-4X6-CLEAR 4” x 6” Beveled, Threaded Nipple $89.00

4pVCpluG pVC Threaded plug – Schedule 40 $3.95

PVC4-80TH pVC Cleaner – 1/2 pint $19.95

pVC-GluE pVC Glue –1/2 pint $6.75

• Discharges potentially dangerous static electricity from equipment when properly grounded.• Specially compounded rubber conducts static electricity. • Resists weathering, abrasion and tearing.

gates static straP

90331 ................................................................................ $12.95 each

The Retract-A-Clamp® coiled static grounding and bonding assemblies provide a cost effective and easy-to-use system. The assembly incorporates 20 feet of corrosion resistant, orange vinyl coated coiled cable and our Model REB2960 clamp and cable lug. Eliminates tangled bonding and grounding assemblies that lie on the floor and present a tripping hazard. Coiled assemblies neatly and compactly retract out of the way when not in use. The coiled plated steel cable is bright orange PVC coated for high visibility.

tufflite retract-a-clamP® grounding caBle

7610K68 20’ Cable with Clamp ....................................... $68.75 eachREB2960 Replacement Clamp.......................................... $26.50 each

A safety inflation cage is mandatory in any shop for tubeless

and multi-piece rims. Constructed of heavy gauge steel welded to a steel base. Guards against blown lock rings, exploding rims and ruptured tire explosions when used properly. These cages meet OSHA safety requirements. (29-CFR Part 1910-177)

ascot tire cage – safety inflation cage

TC-4 Tire Cage, 4-Bar – Inflation Cage ...........................$650.00 each coxreels® static discHarge caBle reel

SD-35 35’ Static Discharge Cable Reel ............................$227.95 each*All types of COxReelS available.

“Static Discharge” spring driven cable reels are built heavy-duty and designed for long-lasting performance. They are specifically designed to be used in combustible environments where the static buildup could ignite a spark and subsequent explosion. Static discharge or grounding reels are commonly paired with fuel hose reels.

• 3/32” Dia. 7 Strand x 7 Wire Galvanized Steel Cable• High Visibility Orange Vinyl Cable Cover• Solid Rubber Cable Stop• Includes Cable, Stop & 50 Amp Grounding Clamp• Non-Sparking Locking Ratchet Secures Cable At Desired Length• Non-Corrosive Stainless Steel Spring, Brass, Pawl & Zinc Plated Ratchet• Multi-Position Arm Guide

PVc fittings – for sigHt glass

Part Number Size/Style PricePVC401.25-FT 1-1/4” ID – Schedule 40 Clear pVC plastic Tubing $6.50 per foot

PVC401.5-FT 1-1/2” ID – Schedule 40 Clear pVC plastic Tubing $7.75 per foot

PVC402-FT 2” ID – Schedule 40 Clear pVC plastic Tubing $10.25 per foot

PVC403-FT 3” ID – Schedule 40 Clear pVC plastic Tubing $27.95 per foot

clear PVc sigHt glass

o

il &

ga

s


Part Number Description Price1010-0100 Standard Wing Nut Assembly – 5/8 $22.95

1010-0001 5/8” Zinc Plated Wing Nut $8.95

1010-0002 Greaseable Wing Nut Assembly $24.95

1010-0003 Zinc Recessed Washer $2.50

1021-0000B 5/8” x 5” Zinc Plated Eyebolt $8.95

1021-0000P Zinc Plated Clevis Pin $2.25

1021-0000R Zinc Plated Roll Pin $0.45

1076-0000 6” Stainless Steel Float Ball $44.95

1089-0001 4” Rubber Seat (fits 4.5” oD pipe) $46.25

1090-0000 3.5” Clamp-on Rubber Seat (fits 3.5” oD pipe) $27.95

1090-0001 Clamp for 1090-0000 Seat $3.95

1010-7000 20” Manway w/6” neck $280.50

cHandler sHutoff and manWay Parts

Vacuum truck suPPlies

*Manways and Gasket Material for Manways Available. Call for details.

Part Number Description Price1049-0000MZ 1-1/2” Brass Pressure Valve $56.95

1050-0000MZ 2” Brass Pressure Valve $61.95

1035-0000MZ 1-1/2” Brass Vacuum Relief Valve $32.75

1041-0000MZ 4” Brass Lever Valve, FM NPT x FM NPT $216.50

1060-0000MZ 6” Brass Lever Valve, FM NPT x FM NPT $376.50

cHandler ValVes

*RV Series Vacuum Pumps (“Jurop Pumps) Available. Call for more information.

sWiVel for Vacuum truck suPPlies330FxFAl Swivel Joint – 3” Female x Female ....................................................................................... $367.50 each3RKOBU Swivel Repair Kit ................................................................................................................... $24.95 each

Square Gasket

Clevis Pin

Eye Bolt

Roll Pin Wing Nut

GreasableWing Nut Assembly

Washer

Rubber Seat

Brass Lever Valve Brass Pressure Valve Vacuum Relief Valve

Float Balls

hoses - cspoutdoors

Documents