hosco parts catalog 2015

8/15/2019 HOSCO Parts Catalog 2015

1/50

HOSCO Musical Instrument Parts & Accessories

Catalog 2015

www.hosco.co.jp

Which

parts

do

you

need?


2/50

Terms & Conditions

Prices Prices are based on FOB Nagoya, Japan in Japanese Yen.

Prices are for distributors only and are condential.

Minimum Order Amount

JPY300,000.-(for Courier) JPY500,000.-(for Air Freight) JPY1,000,000.-(for Ocean Freight)

Minimum Handling Charge In case of shipment by Air Freight

Minimum handling charge of JPY5,000.-is required for a shipment less than JPY500.000.- (must be over JPY300,000.-)

In case of shipment by Ocean

Minimum handling charge of JPY10,000.-is required for a shipment less than JPY1,000,000.- (must be over JPY600,000.-)

Shipment Payment By Courier Service, Air freight, or Ocean By Bank T/T or Paypal (4% of total amount is charged as Paypal fee.)

INDEX

22

25-27

35-37

33

2-5

18

21

10-11

12

8

14

29

6

20

12

28

8

24

22-24

19

16-18

12-13

7-8

15

10

9

4-5

3-4

30

30

41

31

31

35-37

35-36

33

40

5, 41

30

31

32

36

39

29

40, 44

31

32, 42

35-37

39

39, 41

32

32

32

5

30

30

30

41

41

44

44

40, 44

31

44

35-36, 44

44

44

44

44

46

46

42

34

46

Parts (for Elec. Guitar)

Aluminum Ground Materials

Bodies

Bone, Carbon, Plastic, & Brass Nuts

Bone Nuts & Saddles (Pre-shaped by NC)

Bridges

Circuit Wires

Circuit Wiring Sets

Control Knobs

Endpins

Endpin Jacks

Extra Nuts,Washers,&Lock Washers

Fretwire

Machine Heads

Mounting Rings

Neck Joint Ferrules

Necks

Output Jacks

Pickguard Materials

Pickguards

Pickup Covers

Pickups (Wilkinson, Keiyo, & Others)

Plates(Jack, Control, Neck, Back)

Potentiometers

Screws & Springs

Switch Knobs

Switches

Tailpieces

Tremolo Units

Truss Rods

Truss Rod Covers

Wrenches

Parts (for Elec. Basses)

Bodies

Bridges

Control Knobs

Fretwire

Machine Heads

Misc. Bass Parts (Finger Rest & Control Plates)

Necks

Pickguards

Pickup Covers

Pickups (Wilkinson, Keiyo, & Gotoh)

Tailpieces

Truss Rods

Wrenches

Parts (Assortment)

Knobs Assortment

Nut Assortment

Saddle Assortment

Pin Assortment

Picks

Ultem Picks

Finger & Thumb Picks

Flat Picks

Mandlin Picks

Non-slip Picks

Accessories

Wild Deer Skin (Wiping Cloths)

Mutes (Violin & Cello)

Slide Bar

S.O.S. (Sound Offset Spacers)

Moiss2 Guitar Care

Parts (for Banjos & Resonator Guitars)

Armrest

Banjo Tuners

Brackets

Flanges

Resonator Attachments

Resonator Guitar Parts

Sliding Capo

T-shape Wrenches

Tailpieces

Tension Hoops

Tone Ring

Parts (for Acoustic Guitars)

Bent Herringbone Puring

Bindings (Plastic, Celluloid, & Wood)

Bone, Carbon, Plastic, & Brass Nuts

Bone & Plastic Saddles

Bone Nuts & Saddles (Pre-shaped by NC)

Bridges Pins & Endpins

Bridges (Folk, Classic, & Archtop)

Carbon Rods

Center Strips

Conversion Bushings

Extension Nut

Faceguards

Fretwire

Hide Glue

Kerfed Linings

Machine Heads

Nuts and Saddles

Pickguard Sheets

Pickguards (Acousitc & Archtop)

Position Dot Marks

Purfring Inlays

Side Positions

Tailpieces (Archtop)

Truss Rod Covers

Truss Rod Nuts

Truss Rods

Wrenches

Parts (for Mandolins, Ukuleles, & Violins)

Box Wrench

Bridges

Ebony Violin Parts

Hide Glue

Kerfed Linings

Machine Heads

Nuts

Pickguard Brackets

Pickguards

Tailpieces

Truss Rods

38

38

38

38

45

43, 45

45

45

45

43

43

42

42

42

42

43

43

43

42

42

25-26

5

11

29

6

13

28

23-24

19

16-18

5

30

41

HOSCO Parts Page Page Page


3/50

Vintage style guitar machine heads by

HOSCO New Products !!

Now, Gold version is available on Vintage

style M.head - Staggered Posts.

Not only can the Moiss absorb a moisture,

but it can release the moisture !

Metric sized CTS Pots are now available!

Various sizes are available !

Moiss2 Guitar Care

Brass Nuts

HOSCO Selected Potentiometers by

21333GS-STG1

MOISS2-GC1 MOISS2-GC2

Staggered posts

Page 6

Page 37

Page 7

Page 46

for Classical guitarfor Dreadnought guitar

22.0 mm 25.0 mm24.0 mm


4/50

HOSCO Catalog 2015Send your order via e-mail: [email protected] or fax : +81-52-796-1630

2

- HOSCO Parts - EP - Bridges -

TC Guitar Bridges

TC Bridge Cover

Guitar Bridges

String Bushing

For Humbucker with mounting ring.

The saddle height is adjustable. Screws incloud.

Baseplate : Steel (Stamped)

Saddles : Brass (Compensated)

Item# Description

HK-21CS Chrome, w/3 compensated barrel saddles

Vinatge style traditional designs.

The saddle height is adjustable. Screws included.Baseplate : Steel (Stamped)

Saddles : Brass

HK-22CS

T-21

T-40

HK-22SSS

HK-21CS

HK-23CS

T-50C

Item# Description

HK-22CS Chrome, w/3 compensated barrel saddles

HK-22SSS Compensated barrel saddle set, 3 of set

HK-23CS Chrome, w/3 barrel saddles

Fits our HK-22, HK-23, T-21, & T-40.

Material : Steel (Stamped)

Item# Description

T-50C Chrome

Vintage style traditional designs. Screws included.

Baseplate : Steel (Stamped)

Saddles : Brass

Item# Description

T-21C Chrome, w/3 threaded saddles

Item# Description

T-40C Chrome, w/6 barrel saddles

Vintage style Tune-o-matic bridge (ABR-1 type).

The adjustable intonation screws are held with a wire.

Posts & wheels included.

Bridge : Zinc

Saddles : Brass (No notch)

HK-25

HK-10

Item# Description

HK-25C Chrome

HK-25G Gold

HK-25N Nickel

*String spacing=10.4mm / Stud spacing=74.0mm

New style Tune-o-matic bridge w/unnotched saddles.

Studs & anchors included.

Bridge & saddles : Zinc

HK-120

Item# Description

HK-120C Chrome

HK-120N Nickel


For string through a solidbody. Sold individually.

Item# Description

HK-10B Black, 9.5mm dia.

HK-10G Gold

HK-10N Nickel


5/50

*You can purchase marked items with "Hosco Pachaging".

The BIG logo means it covers all of the item in the category.

The SMALL logo means it covers only one item.

*Non-Rohs compliant items

if an item has "non-Rohs" , the item is not Rohs compliant.

if an item has "conrm-Rohs" , the material is not compliant, but

the nish has no problem.

3

Synchronized Tremolo Unit JG/JM type Tremolo Unit & Bridge

MG type Tremolo Unit & Bridge

Vintage style Angled MG Arm

Guitar Vibrato

Traditional tremolo unit.

Two types of blocks are available.

Tremolo arm, mounting screws, springs,

& spring holder included.

Also, a steel block is available

individually.

Baseplate & saddles : Steel

HK-01NS

HK-41

Item# Description

HK-01NS w/Zinc diecast block

HK-01NS/SB w/Steel block

HK-01BLOCK Steel block only

*String spacing=11.0mm

HK-01BLOCK

HK-43NS HK-43NLS

HK-47A/65

Vibrato made with leaf spring.

Mounting screws included.Material : Steel & Brass (a part)

Item# Description

HK-43NS Short style, Nickel

HK-43GS Gold

HK-43NLS Long style, Nickel

HK-43GLS Gold

*Gold is also available. (MOQ: 30 pcs each)

HK-43A Arm only w/attachment parts, Nickel

Material : Steel

Material : Steel

Item# Description

HK-41 Tremolo unit, Chrome, w/screws & arm

HK-41A Tremolo arm only

HK-42 Bridge, Chrome, w/anchors

HK-42

HK-47C

HK-48C

Item# Description

HK-47C Tremolo unit, Chrome, w/screws & arm

HK-47A Tremolo arm only

HK-48C Bridge, Chrome, w/anchors

Item# Description

HK-47A/65 Tremolo arm only, ‘65 type angle

- HOSCO Parts - EP - Bridges / Tremolos -


6/50


4

- HOSCO Parts - EP - Bridges / Tailpieces -

Non Tremolo Guitar Bridges Bass Bridges

Violin Bass Tailpiece

Guitar Tailpieces

Vintage style xed Bridge with stamped saddles.

Screws included.


Adjustable bridge for PB, JB, and the other similar basses.

The string spacing is 20mm. Mounting screws included.


Adjustable bridge with spiral saddles.

The string spacing is 20mm. Mounting screws included.Baseplate : Steel

Saddles : Brass

Item# Description

T-117N Nickel

3-point bass bridge. Studs included.

Material : Zinc

Item# Description

HK-30NS Nickel, w/3 studs

Mounting screws included.

Material : Steel & Brass (a part)

Item# Description

TP-BASS For violin bass, Chrome

Vintage style Jr. bridge / tailpiece.

Allen screws can adjust the overall string length.

Material : Brass (“conrm-Rohs”)

Item# Description

HK-20BS Standard model, Black

HK-20CS Chrome

HK-20GS Gold

Item# Description

HK-TV Chrome, w/metric threaded studs (M8x1.25)

HK-TV-I Chrome, w/inch threaded studs (5/16-24)


Bar tailpiece for solidbody guitars.

The strings can be installed from the front or rear.

LPT-8N has allen screws to adjust the overall string length.

Material : Aluminum alloy

Studs & anchors : Brass (“conrm-Rohs”)

Item# Description

LPT-7N/I Nickel, w/inch threaded studs (5/16-24)

LPT-7G Gold, w/metric threaded studs

LPT-7G/I Gold, w/inch threaded studs

LPT-8N Nickel, w/allen screws & hex wrench

LPT-8N/I Nickel, w/inch allen screws & hex wrench


T-105P

HK-20

T-117N

HK-30NS

TP-BASS

HK-TV

Item# Description

T-105PB Black

T-105PC Chrome

*String spacing=11.2mm

*This product is for sale

while stock lasts.

LPT-7 LPT-8


7/50








5

- HOSCO Parts - GP - Tailpiece / Bridge -

Archtop Guitar Tailpieces Archtop Guitar Bridges

Archtop Guitar Bridges w/T.O.M.

Jazz Guitar Tailpiece

Hinged model for archtop guitars.

Please refer to the drawings below for size.

Screws included.

Machined bridges for archtop guitars.

The saddle is unnotched.

F-2803 & F-2804 come with compensated saddle

and F-2805 & F-2806 come with slanted saddle.

Posts & wheels : Brass

Item# Description

F-2803 Ebony, Compensated, Chrome parts

F-2804 Ebony, Compensated, Gold parts

F-2805 Ebony, Slanted, Chrome parts

F-2806 Ebony, Slanted, Gold parts

GOTOH GE104B is installed on the contoured base.

String spacing is 10.4mm.

Bridge & saddles : Zinc

Trapeze for Django guitars w/original style plastic insert.

Both of ball-end and loop-end strings

can be used.

Material : Brass

Item# Description

F-2820 Nickel, w/Rosewood base

F-2821 Gold, w/Rosewood base

F-2820E Nickel, w/Ebony base

F-2821E Gold, w/Ebony base

175DCS/

175DGS

175DCS/175DGS

FA-CS/

FA-GS

FA-CS/

FA-GS

SSG-6CS/

SSG-6GS

SSG-6CS/

SSG-6GS

Item# Description

175DCS 175 style, Chrome

175DGS 175 style, Gold

FA-CS Byrdland style, Chrome

FA-GS Byrdland style, Gold

SSG-6CS 335 style, Chrome

SSG-6GS 335 style, Gold

F-2803, 2804

F-2820 / 2821 / 2820E / 2821E

150 L x 15 W x 23.5 H (mm)

150 L x 14 W x 23.5 H (mm)F-2805, 2806

F-2850


8/50


6

- HOSCO Parts - EP - Machine Heads -

Vintage style Bass M. Head (GOTOH )

Vintage style Guitar M. Heads (GOTOH )

Item# Description

3196NS Vintage style, Nickel

Item# Description

21333NS-STG1 Vintage style, Nickel

21333GS-STG1 Vintage style, Gold

GOTOH vintage style guitar machine heads

with “Staggered posts”.

Bushings & screws included.

Finish : Nickel , Gold

Side : 6 in line (for Right-handed)

Item# Description

3096NS Vintage style, Nickel

3196NS 3096NS

21333GS-STG1

Recommended

Par t s!GOTOH vintage style bass machine heads.

Features riveted cloverleaf keys with long stems and reverse-wind operation like the original ones.

Bushings & screws included.

Finish : Nickel only

Gear: Reverse-wind

Side : 4 in line (for Right-handed) Which is your taste?

NEW!

Flat back

Torque adjustment

Reverse-wind

Note :

As you could see from

picture, it has a lug on

the back side like the

original ones.

Therefore, precise work

might be required when

you build your bass gui-

tar using this machine

heads.

NEW!

22.0 mm 25.0 mm24.0 mm


9/50








7

- HOSCO Parts - EP - Pots -

HOSCO Selected Potentiometers by

CTS-****-S CTS-**** CTS-****-L

The metric versions have been added!

Most of the CTS pots in the musical instrument industry are

made in the inch unit system.

So even if you like the quality of the CTS pots, but if the other

pots in metric are used to your instruments,

when you install the CTS pots to the instruments, you will have

to do some minor adjustment.

In such moments, use these metric versions, and no more

extra works!

For mounting onto pickguards

If you don’t like a gap between knobs and pickguards,

please choose this short shaft.

Control pots w/regular shaft

Control pots w/regular shaft

Side-view showing the difference of each shaft’s length

For using metal knobs like TC

For mounting onto archtop guitar bodies like LP

Recommended

Par t s!

Dimension

A : 6.4

D : 6.00

L : 15.9

H : 7.5

T : 24 TEETH

Dimension

A : 19.00

D : 6.00

L : 28.6

H : 7.5

T : 24 TEETH

Dimension

A : 12.5

D : 6.00L : 22.2

H : 7.5

T : 24 TEETH

Item# Description

CTS-A250-S 250K w/Short shaft, A type

CTS-B250-S 250K w/Short shaft, B type

CTS-A500-S 500K w/Short shaft, A type

CTS-B500-S 500K w/Short shaft, B type

A type : Audio taper / B type : Linear taper

Fits our inch sized knobs. (Please refer to the page no.10-11.)

Item# Description

CTS-A500-L 500K w/Long shaft, A type

CTS-B500-L 500K w/Long shaft, B typeA type : Audio taper / B type : Linear taper


Item# Description

CTS-A250 250K w/Regular shaft, A type

CTS-B250 250K w/Regular shaft, B type

CTS-A500 500K w/Regular shaft, A type

CTS-B500 500K w/Regular shaft, B type



Item# Description

CTS-A250MM 250K w/Regular shaft, A type

CTS-B250MM 250K w/Regular shaft, B type

CTS-A500MM 500K w/Regular shaft, A type

CTS-B500MM 500K w/Regular shaft, B type


Fits our metric sized knobs. (Please refer to the page no.10-11.)

Item# Description

CTS-A1M-SS 1MEG w/Short & Solid shaft, A type

CTS-A250-SS 250K w/Short & Solid shaft, A type

A type : Audio taper


27.0 mm

33.5 mm

40.0 mm

CTS-****-SSw/short & solid shaft

CTS-****-Sw/short shaft

CTS-****-Lw/long shaft

CTS-****w/regular shaft

CTS-****w/regular shaft

Dimension

A : 9.5

D : 6.00

L : 22.2

H : 7.5

T : 24 TEETH

NEW!

The most famous potentiometers in the music industry.

Shaft : Brass


10/50


8

- HOSCO Parts - EP - Pots / Jacks -

Potentiometers Output Jacks

Mini Potentiometers

Blend PotentiometersEndpin Jacks

Push / Pull Control Potentiometers

Common pots for electric guitars. (24mm dia.)

Fits our metric sized knobs. 1 nut and 1 washer included.

The mono jack can be used for various kinds of electric gui-

tars. 2 nuts & 1 washer included.

Mini pots for electric guitars. (16mm dia.)


Blend pots control the signal mix from two sources, panning

one source to another.


Push-pull pots for electric guitars.


Item# Description

POT-250A 250K, A type

POT-250B 250K, B type

POT-500A 500K, A type


POT-25KA 25K, A type

POT-25KB 25K, B type


Item# Description

POT-2501 250K, A type


POT-5001 500K, A type



Item# Description

VR-126W250 250K

VR-126W500 500K

Item# Description

PUSH-250A 250K, A type

PUSH-250B 250K, B typePUSH-500A 500K, A type

PUSH-500B 500K, B type


POT-250/500/25K

OJ-65G

OJ-65

OJ-65S

POT-2501/5001

VR-126W

PUSH

Dimension

A : 9.2 D : 5.8

L : 19.3 H : 6.8

Dimension

A : 8.3 D : 5.8

L : 17.5 H : 6.8

Size for threaded portion

Length : 8.0mm (Mono) / 6.5mm (Stereo)

Dia. : 8.8mm

Height: 31.7mm

Dia. of Shaft for knob: 6.0mm

Dia. of Shaft for nut: 6.8mm

Height: 45.0mm

Dia. of Shaft for knob: 5.9mm

Dia. of Shaft for nut: 7.9mm

Item# Description

OJ-65 Mono

OJ-65G Mono, Gold

*Gold-plated part : Threaded portion, 1 nut, & washer

OJ-65S Stereo

Item# Description

EP-JACK Mono / Stereo, Nickel

EP-108G Stereo w/small terminals, Gold

EP-108N Nickel

Item# Description

EP-110 Stereo w/small terminals, Nickel

Can be installed from the outside of guitars.Easy and quick!

Item# Description

EP-JACK2 Mono / Stereo, Nickel

For solidbody guitars.

1 nut and 1 washer included.

EP-JACK EP-108

EP-110

EP-JACK2

*The extra nuts & washers are available.

Sold separately.

Please refer to the page no.14 for your reference!


11/50








9

- HOSCO Parts - EP - Switches -

Screws for Lever Switches

Toggle Switches

Mini Toggle Switches

Slide Switch

Switches

3-way for MG w/black plastic lever.

Screw hole spacing : 36.0mm

2 screws, 2 nuts, & 2 washers included.

High-quality 5-way switch with 4 poles.

6 terminals per pole.

Plastic knob included

3-way switch for LP style guitars and the other 2 pickup guitars.

Plastic knob, nut, & washer included.

Item# Description

SON-OFF-ONB 3-way

Item# Description

VLX91 Covered type, 5-way

2 nuts, 1 lock washer, & 1 at washer included.

3-way / 5-way lever switches.

Plastic knob included.

SON-OFF-ONB

VLX91

DM-30/50

DS-5S

YM-30/50

*Circuit kit for MG

(Item# : HK-CKMG)

is also available.

This customized switch was designed and devel-

oped by the nest guitar factory in Japan.

In fact, this switch has been tested more than

10,000 times a day on its development work.

The quality is durable enough.

Depth : 23.0mm (Useful for shallow guitars)


for DS-5S

Item# Description

DM-30 3-way w/Nickel contacts

DM-30G 3-way w/Gold contacts

DM-50 5-way w/Nickel contacts

DM-50G 5-way w/Gold contacts

DS-5S Multi half tone, 5-way w/soft lever action

YM-30 Covered type, 3-way

YM-50 Covered type, 5-way

*Mounting screws are not included except DS-5S.

Item# Description

ON-OFF-ONB On-Off-On, Black

ON-OFF-ONC On-Off-On, Chrome

ON-ON-ONB On-On-On, Black

ON-ON-ONC On-On-On, Chrome

ON-ONB On-On, Black

ON-ONC On-On, Chrome

ON-ON-ON-X On-On-On, w/Short & Round lever, Chrome

Item# Description

YM-T20 Straight w/Nickel contacts

YM-T20B YM-T20 w/Black Nickel brass knob

YM-T20C YM-T20 w/Chrome brass knob

YM-T20G YM-T20 w/Gold brass knob

YM-T20G-2 YM-T20 w/Gold-plated parts

Gold-plated : Knob, nut, washer, lever, & threaded portion

YM-T20GG Straight w/Gold contacts

YM-T70 Right angle

YM-T75 Right angle for 3-pickup guitars

Item# Description

PS06 3x6mm, for 5-way

PS07 3x6mm, for 3-way

Color : Black, Gold, & Nickel

Minimum: 100pcs each

PS06

PS07

YM-T75YM-T70YM-T20

ON-OFF-ON /

ON-ON-ON /

ON-ON

Size for threaded portion

Length : 8.0mm

Dia. : 5.8mm

a: 34.5mm / 29.0mm (ON-ON-ON-X)

b: 13.0mm

ON-ON-ON-X

a

b


12/50


10

Item# Description

KA-160 Amber, Metric

KB-160 Black, Metric

KG-160 Gold, Metric

KA-160I Amber, Inch

KB-160I Black, Inch

KG-160I Gold, InchSKA-160I Amber, Inch, w/Embossed numbers

SKB-160I Black, Inch, w/Embossed numbers

SKG-160I Gold, Inch, w/Embossed numbers

Switch Knobs Control Knobs

Choose inch knobs for american switches. Gibson style speed knobs.

Metric knobs t our Japanese-made pots.

Choose inch knobs for CTS pots.

Embossed numbers look like vintage. (SK-110I only)

Gibson style hat knobs with volume / tone plate.

Metric knobs t our Japanese-made pots.

Choose inch knobs for CTS pots.


L-330 /

L-330I (Inch size is now available!)K-110 /

SK-110I

K-160/

SK-160I

for Lever switches

Item# Description

LB-330 Black

LI-330 Ivory

LW-330 White

LB-330I Black, Inch

LI-330I Ivory, Inch

LW-330I White, Inch

LB-350 Black

LW-350 White

LB-360 Black

LW-360 White

LB-360I Black, Inch

LW-360I White, Inch

Item# Description

LB-390 Black

LI-390 Ivory

LM-390 Mint

LP-390 Parchment white

LVT-390 Vintage

LW-390 White

LB-390I Black, Inch

LI-390I Ivory, Inch

LM-390I Mint, Inch

LP-390I Parchment white, Inch

LVT-390I Vintage, Inch

LW-390I White, Inch

*Vintage color is not relic.

for Toggle switches

Item# Description

TA-340 Amber

TB-340 Black

TI-340 Ivory

TW-340 White

TBS-340 Brass, Unplated

TCH-340 Brass, Chrome

TGL-340 Brass, Gold

TA-340I Amber, Inch

TB-340I Black, Inch

TI-340I Ivory, Inch

TW-340I White, Inch

TBS-340I Brass, Unplated, Inch

TCH-340I Brass, Chrome, InchTGL-340I Brass, Gold, Inch

L-350

L-360

L-390

T-340

Back

w/Embossed Numbers

Item# Description

KA-110 Amber, Metric

KB-110 Black, Metric

KG-110 Gold, Metric

KA-110I Amber, Inch

KB-110I Black, Inch

KG-110I Gold, Inch

SKA-110I Amber, Inch, w/Embossed numbers

SKB-110I Black, Inch, w/Embossed numbers

SKG-110I Gold, Inch, w/Embossed numbers

for Volume

Item# Description

KG-130V Gold, Metric, w/Gold cap

KG-130VS Gold, Metric, w/Silver cap

KB-130V Black, Metric, w/Silver cap

KB-130VG Black, Metric, w/Gold cap

KG-130VI Gold, Inch, w/Gold cap

KG-130VSI Gold, Inch, w/Silver cap

KB-130VI Black, Inch, w/Sliver cap

KB-130VGI Black, Inch, w/Gold cap

for Tone

Item# Description

KG-130T Gold, Metric, w/Gold cap

KG-130TS Gold, Metric, w/Silver cap

KB-130T Black, Metric, w/Silver cap

KB-130TG Black, Metric, w/Gold cap

KG-130TI Gold, Inch, w/Gold cap

KG-130TSI Gold, Inch, w/Silver cap

KB-130TI Black, Inch, w/Silver cap

KB-130TGI Black, Inch, w/Gold cap

Gibson style hat knobs.


- HOSCO Parts - EP - Knobs -

K-130V

K-130T


13/50








11

Item# Description

MK-19FC Flat, Chrome

MK-19FCI Flat, Chrome, Inch

MK-19FN Flat, Nickel

MK-19FNI Flat, Nickel, Inch

MKB-18I Dome, Black, Inch

MKC-18I Dome, Chrome, Inch

MKCK-18I Dome, Cosmo BK, Inch

MKG-18I Dome, Gold, Inch

HK-MKFB Flat, Black

HK-MKFC Flat, Chrome

HK-MKFG Flat, Gold

MK-18B Round, Black

MK-18C Round, Chrome

MK-18G Round, Gold

for Volume

Item# Description

KS-260V Black w/Silver plate

KG-260V Black w/Gold plate

KS-260VI Black w/Silver plate, Inch

KG-260VI Black w/Gold plate, Inch

for Tone

Item# Description

KS-260T Black w/Silver plate

KG-260T Black w/Gold plate

KS-260TI Black w/Silver plate, Inch

KG-260TI Black w/Gold plate, Inch

for Volume

Item# Description

KB-240V Black

KI-240V Ivory

KM-240VGL Mint green w/Gold letters

KV-24V Mint green w/Black letters

KW-240V White

KB-240VI Black*

KI-240VI Ivory*

KP-240VI Parchment white*

KVT-240VI Vintage*

KW-240VI White*

Item# Description

KB-140L Large, Black

KB-140S Small, Black

KJB-500L Large, Black, w/set screw

KJB-500S Small, Black, w/set screw

Item# Description

HK-PKB Plastic dome, Black

HK-PKC Plastic dome, Chrome

KB-SB SB type, Black

KB-150 Point knob, Black

KG-150 Point knob, Gold

KBS-200 Amp knob, w/set screw, Black

KV-520 Violin bass knob w/set screw

for Tone

Item# Description

KB-240T Black

KI-240T Ivory

KM-240TGL Mint green w/Gold letters

KV-24T Mint green w/Black letters

KW-240T White

KB-240TI Black*

KI-240TI Ivory*

KP-240TI Parchment white*KVT-240TI Vintage*

KW-240TI White*

*Vintage color is not relic.

Metal Knobs

Bass Control Knobs

Other knobs

Control Knobs

Recommended

Par t s!Metal Knobs with set screw.

Our MK-18I is made by GOTOH and ts CTS pots.

Fender style ST volume / tone knobs. Metric knobs t our pots.

*marked knobs can be used for both inch & metric size.

Height : 19.0 mm

Dia. : 19.0 mm

Height : 19.0 mm

Dia. : 19.0 mm

Height : 16.3 mm

Dia. : 18.0 mm

MK-18

MK-19FMaterial : Brass (“conrm-Rohs”)

Material : Brass (“conrm-Rohs”)

KH-MKF

K-260V

K-260T

KJB-500L

HK-PKKB-SB

KBS-200 KV-520

K-150

KB-140SKB-140L

KJB-500S

K-240T

K-240V

- HOSCO Parts - EP - Knobs -


14/50


12

- HOSCO Parts - EP - Misc. / Plates -

Elec. Guitar Parts - Misc.

Elec. Guitar Parts - Misc. (Plates)

Vintage-style string retainer. Fender type.

The other jack covers.

Molded plastic neck shim.

Popular designed strap button. Sold Individually.

Traditional TC / ST style jack cover.

HK-05

HK-15

JP-20C

P-100

PD-10

LP-SW

P-101P-102

JP-32C

HK-19

HK-12

HK-10

HK-NFL

HK-40

HK-NFS

*Height: 5.3mm

String Pitch: 6.5mm

*Stopper included

*15mm dia.

*4.2mm thick

*14mm dia.

*5mm thick

*ts our elec.gutar bodies

Item# Description

HK-05C Round string tree, w/screw, Chrome

For TC and the other non-tremolo bridges.

Installed in the back of the guitar. Sold individually.

Position indicator used with Gibson style knobs.

Sold individually.

Item# Description

HK-40 Nickel

HK-40G Gold

Useful for attaching a neck to a solidbody when you don’t

use a at neck plate. (You need to make counterbore holes.)

Sold Individually.

Item# Description

HK-NFLB Neck joint ferrule, Black

HK-NFLC Chrome,

HK-NFLG Gold

HK-NFSB Neck joint ferrule, Black

HK-NFSC Chrome

HK-NFSG Gold

Item# Description

LP-SW-B Treble/Rhythm plate, Black

LP-SW-I Ivory

P-101B Back plate for toggle switch, Black

P-101I IvoryP-102B Back plate for pots, Black

P-102I Ivory

Item# Description

HK-12NS Endpin, w/screw, Nickel

Item# Description

HK-10B String bushing, Black, 9.5mm dia.

HK-10G Gold

HK-10N Nickel

Item# Description

HK-15B Jack cover, Black

HK-15C ChromeHK-15G Gold

HK-19C Jack cover, Chrome

Item# Description

JP-20C Jack cover, Square, w/screws, Chrome

JP-32C Jack cover, Round, Chrome

P-100B Plastic jack plate, Black

P-100I Ivory

Item# Description

PD-10 Plastic neck shim, Black

for LP style guitars


15/50








13

Item# Description

P-103B Back plate, No Hole, Black

P-103W White

P-104B Back plate, P=10.5mm, Black

P-104W White

P-105B Back plate, P=11.2mm, Black

P-105W White

P-105M Mint green 3 ply

- HOSCO Parts - EP - Plates / Bass Misc. -

Elec. Guitar Parts - Misc. (Plates) Elec. Bass Parts - Misc.

Fender style neck plate.


Item# Description

F-REST Finger-rest, Black

Item# Description

HK-16BCS 3-hole neck plate, w/screws, Chrome

JB style control plate. Mounting screws included.

for TC style guitars

TC style control plate. Mounting screws included.

Item# Description

JB-2CS Bass control plate, w/screws, Chrome

Item# Description

HK-16CS 3-hole neck plate, w/screws, Chrome

Item# Description

TC-07BS Control plate, w/screws, Black

TC-07CS Chrome

TC-07GS Gold

for LP style guitarsFinger-rest for JB/PB style basses.

Fender style neck plate for basses. Mounting screws included.

P-105M

P-104 F-REST

HK-16BS

JB-2CS

P-103

P-105

P-104 / 105

HK-16CS

TC-07

Bass machine heads

are appeared

at page no.6


16/50


14

Extra Nuts, Flat Washers, & Lock Washers for Pots and Jacks Minimum: 100pcs each

- HOSCO Parts - EP - Extra Parts for Electronics -


17/50








15

Item# Size (AxB) Shape Finish

WS-01G 2.1 x 8 mm #1 Gold

WS-02 2.1 X 10 mm #2

WS-20 2.4 x 13 mm #2

WS-21 2.7 x 10 mm #2

WS-03 2.7 x 13 mm #2

Finish : Chrome, Cosmo Black, Gold, & NickelWS-08 2.4 x 10 mm #2

Finish : Chrome, Cosmo Black, & Gold

WS-22 2 x 7 mm #3 (for slotted head)

Finish : Cosmo Black, Gold (Brass), & Nickel

Item# Size (AxB) Shape

WS-05 3.5 x 25 mm #2

WS-09 3.8 x 25 mm #1

Finish : Chrome, Cosmo Black, & Gold

TS-02 3 x 25 mm #3

TS-04 3.5 x 20 mm #1

Finish : Chrome, Cosmo Black, Gold, & Nickel

TS-05 3.5 x 25 mm #1

TS-06 3 x 12 mm #1


TS-08 4 x 25 mm #1



WS-04 3.5 x 25 mm #3


Finish

WS-10B 2.4 x 10 mm #3 Black only

WS-11 2.4 x 16 mm #2

WS-12 2.4 x 13 mm #2

TS-01 3 x 12 mm #3

TS-03 4 x 45 mm #3

TS-12 3 x 16 mm #3


TS-09B 2.3 x 6 mm #1 Black only

- HOSCO Parts - EP - Screw / Springs -Size (AxBmm)

Screws Minimum: 100pcs each

Shapes

#1 Flat Head #2 Round Head

#3 Oval Head

A

B

for Lever switches


PS06 3 x 6 mm #3

PS07 3 x 6 mm #2

Finish : Black, Gold, & Nickel

for Mounting rings


PS08 2.4 x 13 mm #3

PS09 2.4 x 16 mm #3

Finish : Black, Chrome, Gold, & Nickel


PSH08 2.4 x 13 mm #1

PSH09 2.4 x 16 mm #1


for Pickup mounting


PS10 2.6 x 25 mm #2

PS11 2.6 x 30 mm #2

PS12 2.6 x 35 mm #2

PS13 2.6 x 40 mm #3

PS14 3 x 20 mm #2

PS15 3 x 25 mm #2


Pickup springs

Item# Length Shape

PG08 8 mm Tapered

PG17 17 mm Tapered

PG21 21 mm Straight

PG27 27 mm Straight

PG30 30 mm Straight

PG42 42 mm Straight

Polepiece Screws

Item# Size Finish

PL19G 3 x 19 mm Gold

PL19N 3 x 19 mm Nickel

Which is for Which... A Reference List of Screws for GOTOH Parts

WS-01

35G6500/1800/1600(8)

WS-09

GTC201/202(4)

GTC510(4)

TS-06

J510-4/5/6(2)

TS-08

303-4/5/6(2), 404-4/5(2)J510B-4/5/6(4), 205B-5(5)

TS-09 BB-02(2) TS-12 RB30(1)

WS-10

BB-04(4), BB-04W(4)

TS-03

NBS-3/NBS-3H(4), SPH(2)

TS-04

WT3(4), WB2V(3), WB2P(5)

WS-11

RG15(1), RG30(1), RG130(1)

*( ) Quantity needed

WS-12

RG105(1)

TS-01

JCS-1(2), JCB-2(2), JCB-4(4)

RB20(1), CP10(2)

WS-02

SG(6), 35G(8), MA/MF(10)

M120/M120S(10), UK12(8)

GB350(4), GB707/720(4)

WS-20

SD510/SD90(12)

SDS510/SD91(7)

GBS510(4)

WS-21

SE510/SE510M/SE700/770(12)

SES510/SE701(7), UK700(8)

WS-22 (slotted)

35G510(8)

WS-03

GB1/GB2/GB29/FB3(16)

GB11W(12), GB640/GBR640(16)

GB528/GB528S (8)

TS-02

GTC101/102(5), GTC12(5)

510TA-4(5), 510TA-5(6)

201B-4(5), 203B-4(7)

WS-04

EP-A1(1), EP-B1(1)

EP-B2(1), EP-B3(1)

WS-05

GE101T/102T(6), GE101TS(6)

VSVG(6), VSV400(6),

VSV400P(6)

WS-08

SGS510/510Z(6) SGL510/

510Z(6) , SGV510/510Z(6)

SE510W/SE780(12)

TS-05

WBBO-4(3), WBBO-5(4)WBBO-6(5)

WBG-4/5/6(5), 510B-4/5/6(6)

EPR-2/EP-FR2(1), 303-4/6(5)

404-4(5), 303-5/404-5(4)

for GOTOH Machine heads

for GOTOH Bridges/Tremolos

for GOTOH Parts

Item# Description

ST-SSM M3x10mm, for 1.5mm Hex. wrench (Metric)

ST-SSI M3x10mm, for 1.27mm Hex. wrench (Inch)

Item# Size (AxB)

TS-11 2.7 x 13 mm #3


Saddle height adjustment screws

Pickguard mounting screws (Small head)


18/50


16

- HOSCO Parts - EP - Pickups -

(Made in Japan)

What is Wilkinson pickups?

Wilkinson Covered Humbuckers

Wilkinson No Cover Humbuckers

Wilkinson P-90 Style

Wilkinson Bass Pickups

Wilkinson Single Coils

The Wilkinson pickups were originally designed for Fret-King guitars

by Mr.Trevor Wilkinson in the U.K. The sound of the Wilkinson pick-

ups are based on American vintage guitars which were made in

1950s to 1960s. Today we can see many licensed Wilkinson pick-ups which are made in Korea or China, but all of our Wilkinson

pickups are made in JAPAN.

Classic style Humbucker with Nickel-silver cover. Wider Pitch.

DC Resist.: 8.43K, Reso. Peak: 7.7KHz

Mounting screws included. (Nickel-plated)

Open coil style Humbucker. Higher output than WCHV.

Wider pitch. DC Resist.: 8.66K, Reso. Peak: 6.6KHz


Rear pickup is reverse wound/reverse polarity.


Alnico V Magnets (waxed). Mounting screws included.

Item# Description

WCHV-FB Neck, Black, 9.8mm pitch

WCHV-FC Neck, Ivory (Cream)

WCHV-RB Bridge, Black, 10.5mm pitch

WCHV-RC Bridge, Ivory (Cream)

*Packaged (plastic box)

Item# Description

WHCLV-FB Neck, Black, 9.8mm pitch

WHCLV-FC Neck, Ivory (Cream)

WHCLV-RB Bridge, Black, 10.5mm pitch

WHCLV-RC Bridge, Ivory (Cream)


Item# Description

WP90V-FB Neck, DC Resist.: 5.95K, Reso. Peak: 6.8KHz, Black

WP90V-FC Neck, Ivory (Cream)

WP90V-RB Bridge, DC Resist.: 5.95K, Reso. Peak: 6.8KHz, Black

WP90V-RC Bridge, Ivory (Cream)

WP90V-HB Hot-ver, DC Resist: 5.20K, Reso. Peak: 7.4KHz, Black WP90V-HC Hot-ver, Ivory (Cream)


Item# Description

WBP-B PB style, Set, DC Resist:9.26K, Reso. Peak: 6.0KHzWBJ-NB JB style, Neck, DC Resist:7.15K, Reso. Peak: 4.8KHz

WBJ-BBJB style, Bridge


Standard version. Staggered polepieces with at top Alnico

V magnets (waxed). Middle pickup is reverse wound/reverse

polarity. Rear pickup is slightly overwound for better balance.

Mounting screws included. (Nickel-plated) String Pitch:

10.5mm

Item# Description

WCLS-NB Neck, DC Resist.: 5.20K, Reso. Peak : 7.4KHz, Black

WCLS-NW Neck, White

WCLS-NC Neck, Ivory (Cream)WCLS-MB Middle, DC Resist.: 5.20K, Reso. Peak: 7.4KHz, Black

WCLS-MW Middle, White

WCLS-MC Middle, Ivory (Cream)

WCLS-BB Bridge, DC Resist.: 6.28K, Reso. Peak : 6.1KHz, Black

WCLS-BW Bridge, White

WCLS-BC Bridge, Ivory (Cream)


Item# Description

WHS-NB Neck, DC Resist.: 6.28K, Reso. Peak : 7.4KHz, Black

WHS-NW Neck, White

WHS-NC Neck, Ivory (Cream)

WHS-MB Middle, DC Resist.: 6.28K, Reso. Peak: 7.4KHz, Black

WHS-MW Middle, White

WHS-MC Middle, Ivory (Cream)

WHS-BB Bridge, DC Resist.: 5.20K, Reso. Peak : 7.0KHz, Black WHS-BW Bridge, White

WHS-BC Bridge, Ivory (Cream)

*Packged (plastic box)

WCLS

WT-N

WHS

WCHV

WHCLV

WP90V

WT-B

WBP-B WBJ

Hotter version of the WCLS.

Front and middle pickups are recommended when you

choose Humbucker in the rear position for S-S-H.


Wilkinson for TC style GuitarsGreat combination for classical elec. sound.


String Pitch: 11.0mm (WT-B)

Item# Description

WT-N Neck, Nickel, DC Resist.: 4.66K, Reso. Peak : 12.0KHz

WT-B Bridge, Black, DC Resist.: 5.88K, Reso. Peak : 7.5KHz



19/50








17

Item# Description

SS-1W Single coil, Staggered, White

SS-1B SS-1, Black

SS-1C SS-1, Cream

SS-1M SS-1, Mint green

SS-1FW Single coil, Flat, White

SS-1FB SS-1F, Black

SS-1FC SS-1F, CreamSS-1FM SS-1F, Mint green

*including screws and springs

- HOSCO Parts - EP - Pickups -

Humbuckers

Twin-Blade Pickups

Jazz Pickups

Single Coil Pickups

Bass Pickups

The humbuckers are designed to get the real PAF sound, mak-

ing the new guitar’s tone to vintage like. CP-2 has a Nickel-sil-

ver pickup cover available in nickel and gold. CP-1 has Alnico

III magnet and CP-2 has original designed Alnico magnet “AL-

MAX” Winding with enamel wire. CP-1 is 8.4K ohms and CP-2 is

7.8K ohms. CP-2 is mounted in the D’Angelico guitars.

TDL Makes the powerful mid-range tone but the noise is ex-

tremely low. The bar magnet mounted in the rear pickup are

slanted to match the bridge to get the string’s vibration prop-

erly. Featuring Ceramic magnets. TDL-N is 8.5K ohms, TDL-B is

8K ohms.

Item# Description

CP-1 Humbucker, No Cover

CP-2N Humbucker w/Nickel cover

CP-2G CP-2 w/Gold cover


Magnet : Alnico V

Resistance : 8.0K ohms

Polepiece spacing : 10.0mm

Tone : Sweet

The best choice of the replacement for the vintage guitars.

With Alnico V magnets, staggered or at polepieces. The ex-

act materials are chosen. 5.8K ohms.

The reproductions of original bass pickups produced in 50s,makes the best balanced tone. Alnico V magnets, winding

with enamel wire, PB-1 is 8.5K ohms, CJ-1N is 7.8K ohms and

CJ-1B is 8K ohms.

Item# Description

PB-1 Dual pickup for bass

CJ-1N Single pickup for bass, Neck

CJ-1B CJ-1, Bridge


Item# Description

TDL-N Twin-Blade TL, Neck

TDL-B Twin-Blade TL, Bridge


Item# Description

JZ-NECK-G Neck, Gold

JZ-NECK-N Neck, Nickel

JZ-SIDE-G Side, Gold

JZ-SIDE-N Side, Nickel

CP-1 CP-2

JZ-NECK

TDL-N

PB-1

SS-1

JZ-SIDE

TDL-B

CJ-1

Acoustic Instruments PickupsPS-2000 system has the saddles pickup (can be cut for any

length, even for the ukuleles) with the original designed pre-

amp installed in the end-pin jack cover.

PS-700 system has 2 pure sensor contact pickups.

Item# Description

PS-700 Pure Sensor contact p.u. system*including 9V battery connector, End-pin jack

*original preamp installed to jack cover.

PS-700


20/50


21/50








19

- HOSCO Parts - EP - Pickup Covers -

Guitar Pickup Covers

Guitar Pickup Covers

PC-2/OD-ST-C

PC-TV PC-SB

OD-TE-C

OD-PB-CB PC-PM

PC-HX

PC-JM

OD-JB-CB

PC43/PV41

ST style plastic pickup covers.

P-90 style plastic pickup cover.

P-90 style plastic pickup cover.

TC style metal pickup cover.

Humbucking pickup covers.

JB style plastic bass pickup covers.

Item# Description

PC-2B 10.5mm pitch, Mat, Black

PC-2W PC-2, White

OD-ST-CB 10.5mm pitch, Gloss, Black

OD-ST-CW OD-ST-C, White

OD-ST-CM OD-ST-C, Mint

OD-ST-CI OD-ST-C, Ivory

OD-ST-CP OD-ST-C, Parchment white

Item# Description

PC-TVB Dog-ear type, Black

PC-TVI Ivory (Cream)

PC-SBB Soap-bar type, Black

PC-SBI Ivory (Cream)

*10mm pitch

Item# Description

OD-TE-CG Gold

OD-TE-CN Nickel

Item# Description

OD-PB-CB 18.8mm pitch, Gloss Black

PC-PM Non-pole type, Mat Black

Item# Description

PC-HX Non-pole type, Plastic, Black

PC43G Metal, 9.8 mm pitch, Gold

PC43N PC43, Nickel

PC41G Metal, 10.5 mm pitch, Gold

PC41N PC41, Nickel

OD-JB-CF (FRONT) OD-JB-CR (REAR)

Item# Description

OD-JB-CBF Gloss, Black, Neck

OD-JB-CBR OD-JB-CB, Bridge

OD-JB-CWF Gloss, White, Neck

OD-JB-CWR OD-JB-CW, Bridge

PC-JM-F Non-pole type, Mat Black, Neck PC-JM-R PC-JM, Bridge


22/50


20

Mounting Rings - Plastic Metal Mounting Rings

Traditional plastic mounting rings for at top guitars.

Mounting screws sold separately.

These are for standard-size humbuckers.


Material : Brass (Machined) (“conrm-Rohs”)

MR-F

MRA-MF

MR-MR

MRA-MR

MR-FF

*Flat top and bottom

*Flat top & cuved bottom

MRA-MF (FRONT)




MR/MRA-MR (REAR)

MR-R *Flat top and bottom

Item# Description

MR-FB Neck, Flat, Black

MR-FI MR-F, Ivory (Cream)MR-RB Bridge, Flat, Black

MR-RI MR-R, Ivory (Cream)

Item# Description

MRA-FB Neck, Curved, Black

MRA-FI MRA-F, Ivory (Cream)

MRA-RB Bridge, Curved, Black

MRA-RI MRA-R, Ivory (Cream)

For ST / TC type pickups. These t our pickup covers.


Material : Brass (Machined) (“conrm-Rohs”)

Item# Description

MR-1FB Neck, Curved bottom, Black MR-1FI MR-2F, Ivory (Cream)

MR-1RB Bridge, Curved bottom, Black

MR-1RI MR-2R, Ivory (Cream)

Item# Description

MR-STBS For single coil, Black

MR-STCS MR-ST, Chrome

MR-STGS MR-ST, Gold

MR-TCBS For metal covered, Black MR-TCCS MR-TC, Chrome

MR-TCGS MR-TC, Gold

*Screws included

Traditional plastic mounting rings for arched top guitars.

Mounting screws sold separately.

MRA-F

MR-1F

MR-ST

MR-TC

*Curved top and bottom


*Matches our single coil covers

*Matches OD-TE-C cover

MRA-R

MR-1R

*Curved top and bottom


*This product is for sale

while stock lasts.

Item# Description

MR-MRBS Bridge, Flat, Black

MR-MRCS MR-MR, Chrome

MRA-MFBS Neck, Arched, Black

MRA-MFCS MRA-MF, Chrome

MRA-MFGS MRA-MF, Gold

MRA-MRBS Bridge, Arched, Black

MRA-MRGS MRA-MR, Gold

MR-FFBS Flat, 1.6mmT, Black

MR-FFCS MR-FF, Chrome

MR-FFGS MR-FF, Gold

*Screws included

The MR-FF ts our plastic mount-

ing rings, if you put this on top ofthe plastic ring, you can change

the look with less weight than

normal metal mounting rings.

Also, you can use this for Hum-

bucker on ST style guitars.

Please refer to the size of our

plastic mounting rings.

(Thickness: 1.6mm)

- HOSCO Parts - EP - Mounting Rings -


23/50








21

These screws t our mounting rings.

When you order our plastic mounting rings, please don’t for-

get to purchase these screws.

Item# Description

PS08 2.4 x 13 mm, for Neck

PS09 2.4 x 16 mm, for BridgeFinish : Black, Chrome, Gold, & Nickel

PSH08 2.4x13mm, for Front

PSH09 2.4x16mm, for Rear


Screws for Mounting Rings

Circuit Kits

Capacitors

Slide Switch

High quality electronics made in Japan.

with HOSCO packaging for display.

Diagram included.

JB, PB, & MG have been added newly!

Item# Description

HK-CKJB JB type

HK-CKPB PB type

HK-CKMG MG type

HK-CKST ST type

HK-CKTC TL type

HK-CKLP-B LP type w/Black knob & plate

HK-CKLP-I LP type w/Ivory knob & plate

HK-CKJB

HK-CKMG

HK-CKTC

HK-CKST

SON-OFF-ONB

HK-CKLP-B/I

HK-CKPB

CR-223

CR-473

- HOSCO Parts - EP - Circuit Kits / Capacitors -

250K audio pot x 3

Output jack x 1

Capacitor (0.047uf) x 1

Single wire x 4

Slide switch x 2

250K audio pot x 2Output jack x 1


Single wire x 11

Ground wire x 1

250K audio pot x 2

3-way switch x 1

including knob & screws

Output jack x 1

Capacitor x 2

(0.047uf & 0.001uf)

Single wire x 5

250K audio pot x 3

5-way switch x 1(including Black & Ivory knobs & screws)

Output jack x 1


Single wire x 8

500K audio pot x 2

500K linear pot x 2

Toggle switch x 1

including knob & plate

Output jack x 1


Single wire x 8

Single conductor wire x 1

3-conductor wire x 1

250K audio pot x 2

Output jack x 1


Single wire x 4

*Oval head (+)


*Flat head (+) - Gibson style

PS08 / PS09

PSH08 / PSH09

Recommended

Par t s!


Japanese-made capacitors (Polyester Film Capacitor)

Item# Description

CR-223 0.022uf, for Humbucker

CR-473 0.047uf, for Single coil

3-way for MG w/black plastic lever.


2 screws, 2 nuts, & 2 washers included.

Item# Description

SON-OFF-ONB 3-way


24/50


22

- HOSCO Parts - EP - Pickguards / Ground Materials -

Electric Guitar Pickguards Aluminum Ground Plates

Aluminum Ground Sheets

TC Bakelite Pickguards

Material : PVC plastic

Vintage style Aluminum ground plates.

Useful for noise reduction.

Fits our Vintage series ST pickguards.

Material : AluminumWhat is the “- Vintage series -”?

Our Vintage seriese are reproduced

based on the original shape and

the position of screw holes, pot

holes, switch slot, and pickup holes.

- Vintage series -- Vintage series -

Vintage style TC pickguards

Vintage style ST pickguards

VS-60TLPG/VW VS-AGP55

AGS-SS

TC-BL-B1P

VS-57STPG/VW

VS-61STPG/MI

vw MI

VS-64TLPG/MI

VS-AGP59

AGS-ST

TC-BL-EQ

VS-59STPG/MI

VS-63STPG/MI

Vintage White 1 Ply

Vintage White 1 Ply

Mint Ivory 3 Ply

Thickness: 1.5mm Thickness: 2.6mm

(Dened Black Line)

Mint Ivory 3 Ply

Mint Ivory 3 Ply

Mint Ivory 3 Ply

Item# Description

VS-60TLPG/VW for ’59, 8 mounting holesVS-64TLPG/MI for ’64, 8 mounting holes

Aluminum ground sheets. Self-adhesive.

Useful for noise reduction.

Blank sheet is also available.

Recommended

Par t s!

Item# Description

VS-57STPG/VW for ’54-’58, 8 mounting holesVS-59STPG/MI for ’59, (’54-’58), 8 mounting holes

VS-61STPG/MI for ’60-’62, 11 mounting holes

VS-63STPG/MI for ’63-’65, (’66-’74), 11 mounting holes

Item# Description

VS-AGP55 for ’54-’58, Control area onlyVS-AGP59 for ’58-’59, 8 mounting holes

VS-AGP61 for ’60-’62, 11 mounting holes

VS-AGP63 for ’63-’65, (’66-’74), 11 mounting holes

Item# Description

AGS-SS Control area only

AGS-ST ST shape

AGS-SQ Blank, 530 x 300 mm

Item# Description

TL-BL-B1P Black 1 ply, 5 mounting holes

TL-BL-EQ Black 1 ply, No pickup hole, 5 mounting holes

In 1950’s, Bakelite was popular material for electric pickguards,

but it disappered in 1960’s. Our bakelite pickguards are for

vintage lovers.

Thickness : 2.0 mm


25/50








23

- HOSCO Parts - EP - Pickguards -

Elec. Guitar Pickguards

Pickguard Mounting Screws

Item# Color / Mounting Holes

TC-B1P Black 1 Ply (5)

TC-B3P Black 3 Ply (8)

TC-W1P White 1 Ply (5)

TC-W3P White 3 Ply (8)

TC-G3P Mint Green (8)

TC-P3P White Pearloid (8)TC-PI05 Yellowish Pearloid (8)

TC-T3P Tortoise (8)

TC-800M Tortoise/Mint (8)

Item# Color

JB-B1P Black 1 Ply

JB-B3P Black 3 Ply

JB-W1P White 1 Ply

JB-W3P White 3 Ply

JB-G3P Mint Green

JB-P3P White Pearloid

JB-PI05 Yellowish Pearloid

JB-T3P Tortoise

JB-800M Tortoise/Mint

Item# Color

LP-B3P Black 3 Ply

LP-IVO Ivory 1 Ply

*Bracket & screws are included.

Material : PVC plastic

TC Pickguards

JB Pickguards Mounting Holes: 11

LP Pickguard

Pickguard Brackets


Item# Size

TS-01 3 x 12 mm


TS-11 2.7 x 13 mm


PS-08 2.4 x 13 mm (for LP pickguards)

Finish : Black, Chrome, Gold, & Nickel


SC-B1P Black 1 Ply (8)

SC-B3P Black 3 Ply (11)

SC-W1P White 1 Ply (8)

SC-W3P White 3 Ply (11)

SC-G3P Mint Green (11)

SC-P3P White Pearloid (11)

SC-PI05 Yellowish Pearloid (11)

SC-T3P Tortoise (11)

SC-800M Tortoise/Mint (11)

ST Pickguards (S-S-S)

SC

TC

Item# Color

PB-B1P Black 1 Ply

PB-B3P Black 3 Ply

PB-W1P White 1 Ply

PB-W3P White 3 Ply

PB-G3P Mint Green

PB-P3P White Pearloid

PB-PI05 Yellowish Pearloid

PB-T3P Tortoise

PB-800M Tortoise/Mint

PB Pickguards Mounting Holes: 13

PB

JB

LP


SC-B1P-2 Black 1 Ply (8)


SC-W1P-2 White 1 Ply (8)


SC-G3P-2 Mint Green (11)

SC-P3P-2 White Pearloid (11)

SC-PI05-2 Yellowish Pearloid (11)

SC-T3P-2 Tortoise (11)

SC-800M-2 Tortoise/Mint (11)

ST Pickguards (No Holes)

SC-2











ST Pickguards (S-S-H)

SC-3











ST Pickguards (1H)

SC-4

*Color Reference

B3P: Black/White/Black

W3P: White/Black/White

G3P: Mint Green/Black/Mint

P3P: Pearloid/White/Black/White

PI05: Yellowish Pearloid/White/Black/White

T3P : Tortoise/White/Black/White

800M: Tortoise/Mint Green/Black/Mint

HK-50

Item# Finish

HK-50CS Chrome

HK-50GS Gold

Pickguard bracket for LP

Mounting screws, bolt and nut included.


26/50


24

- HOSCO Parts - EP - Pickguards -

Fender style pickguards Gibson style pickguards

Item# Color

TT-P3P Pearloid

TT-T3P Tortoise

Item# Color

TD-B3P Black 3 Ply

TD-W3P White 3 Ply

Item# Color

SG-B3P Black 3 Ply

SG-W3P White 3 Ply

Item# Color

SM-B3P Black 3 Ply

SM-W3P White 3 Ply

Item# Color

FV-B3P Black 3 Ply

FV-W3P White 3 Ply

Item# Color

FB-B3P Black 3 Ply

FB-W3P White 3 Ply

Item# Color

E1-B3P Black 3 Ply

E1-IVO Ivory

Item# Color

E3-B3P Black 3 Ply

E3-IVO Ivory

Item# Color

EX-B1P Black 1 Ply

EX-B3P Black 3 PlyEX-W1P White 1 Ply

EX-W3P White 3 Ply

Item# Color

TM-B3P Black 3Ply

TM-W3P White 3 Ply

TM-P3P Pearloid

TM-T3P Tortoise

Item# Color

JM-B3P Black 3 Ply

JM-W3P White 3 Ply

JM-G3P Mint 3 Ply

JM-P3P Pearloid

JM-T3P Tortoise

Item# Color

MU-B3P Black 3 Ply

MU-W3P White 3 Ply

MU-P3P Pearloid

MU-T3P Tortoise

Item# Color

TH-B1P Black 1 Ply

TH-B3P Black 3 Ply

TH-W1P White 1 Ply

T-Thinline Pickguards

T-Deluxe Pickguards

SG Pickguards

SG Custom Pickguards

FV Pickguards

FB Pickguards

175 Pickguards

335 Pickguards

EX Pickguards

T-Custom Pickguards

JM Pickguards

MU Pickguards

Other style pickguards

T-Humb Pickguards

MM Bass Pickguards

Item# Color

MS-B3P Black 3 Ply

MS-W3P White 3 Ply

for electric guitars. 227x390mm

Item# Color

PG-B1 Black 1 Ply

PG-B3 Black 3 Ply

PG-W1 White 1 Ply

PG-W3 White 3 Ply

PG-G3 Mint Green

PG-P3 White PerloidPG-PI05 Yellowish Perloid

PG-T3 Tortoise

PG-800M Tortoise/Mint

Pickguard Sheet Blanks

MS

MU

TH

JM

SG

SM

FV

EX

FB

E1

E3

TT

TM

TD

PG

*Color Reference

B3P: Black/White/Black

W3P: White/Black/White

G3P: Mint Green/Black/Mint

P3P: Pearloid/White/Black/White

PI05: Yellowish Pearloid/White/Black/White

T3P : Tortoise/White/Black/White

800M: Tortoise/Mint Green/Black/Mint


27/50








25

- HOSCO Parts - EP - Unfnished Bodies -

Recommended

Par t s!

ST / TC type guitar bodies just routed by NC machine.

These bodies have drilled holes for neck plate and to jack

cavity from control cavity for wiring.

Require a sanding process for nishing.

BD-PB

Electric Guitar Bodies (Unsanded) Standard Electric Guitar Bodies

Electric Bass Bodies (Unsanded)

Enlarged Photo of BD-ST

Item# Material Piece

BD-01ST or TC Mahogany 1 pc

BD-02ST or TC Mahogany 2 pcs

BD-03ST or TC Mahogany 3 pcs

BD-08ST or TC Alder 2 pcs

BD-09ST or TC Alder 3 pcsBD-09STN Alder 3 pcs

BD-18ST or TC White ash 2 pcs

for Non-tremolo

for Non-tremolo

JB / PB type bass bodies just routed by NC machine.

These bodies require a sanding process for nishing.

Item# Material Pieces

BD-04JB or PB Mahogany 1 pc

BD-05JB or PB Mahogany 2 pcs

BD-06JB or PB Mahogany 3 pcs

BD-11JB or PB Alder 2 pcsBD-12JB or PB Alder 3 pcs

BD-20JB or PB White ash 2 pcs

BD-JB

BD-ST BD-TC

HBD

HBD

These bodies are machined by NC and sanded well.

Ready for nishing process.

- ST type -

- TC type -

Ready for nishing process



HBD-112 Alder 2 pcs

HBD-11 Alder 3 pcs

HBD-16 Alder 3 pcs

*HBD-16 is not drilled for bridge.


HBD-111M Mahogany 1 pc

HBD-112M Mahogany 2 pcs



HBD-212 Alder 2 pcs

HBD-21 Alder 3 pcs

*ts HK-10 string bushings






28/50


26

- HOSCO Parts - EP - Unfnished / Finished Bodies -

Standard Electric Bass Bodies Finished Standard Elec. Guitar & Bass BodiesThese bodies are machined by CNC and sanded well.

Ready for nishing process.

3 piece Alder bodies painted in high gloss.

ST, TC, PB, & JB type bodies.

Available colors are mentioned below.- PB type -

- JB type -



HBD

2TS

VWH

SBL

CAR

FRD

3TS

BLK

SFG

HBD


HBD-312 Alder 2 pcsHBD-31 Alder 3 pcs


HBD-412 Alder 2 pcs

HBD-41 Alder 3 pcs









Color options

2TS: 2 Tone Sunburst 3TS: 3 Tone SunburstBLK: Black VWH: Vintage White

SFG: Surf Green CAR: Candy Apple Red

FRD: Fiesta Red SBL: Sonic Blue


29/50








27

- HOSCO Parts - EP - TC Bodies w/Bindings -

TC “Laminated” Bodies with Bindings TC Bodies with BindingsThese bodies are already sanded for nishing. These bodies are already sanded for nishing.

2 piece Alder body laminated top & back with fancy wood.

with ivory-colored bindings.

Binding size: 6mm wide x 2mm thick

2 piece-bodies w/bindings.

Binding size: 6mm wide x 2mm thick

Item# Description

BD-02TC-BD Mahogany, Ivory-colored Bindings

BD-08TC-BD Alder, Ivory-colored Bindings

BD-HKA

BD-CMP

BD-BMP

BD-BMA

BD-BBG

BD-02TC-BD

BD-08TC-BD

Item# Description

BD-BBG Bubinga

BD-BMA Burl mahoganyBD-BMP Bird’s eye maple

BD-CMP Curly maple

BD-HKA Hawaiian koa

String Bushing

HK-10

For string through a solidbody. Sold individually.

Item# Description

HK-10B Black, 9.5mm dia.

HK-10G Gold

HK-10N Nickel


30/50


28

Maple 1P necks with skunk stripe.

9.5” (240mm) radius with Medium-jumbo fretwire.

Item# Type Fret Finish

HNK-11/95R ST 21F Unnished

HNK-21/95R TC 21F Unnished

Maple necks with Rosewood ngerboard.

9.5” (240mm) radius with Medium-jumbo fretwire.


HNK-12/95R ST 21F UnnishedHNK-22/95R TC 21F Unnished

- HOSCO Parts - EP - Necks -

ST / TC type Elec. Guitar Necks PB / JB type Elec. Bass Necks

Both of Unnished and Finished is available.

Finished necks are done in clear polyurethane.

SBB23 Small fretwire is used for 185R and 305R necks.

Both of Unnished and Finished is available.

Finished necks are done in clear polyurethane.

SBB213 Jumbo fretwire is used.

HF-M3 Medium-jumbo fretwire is used for 9.5”R (240R) necks.

JB style maple necks with block inlays & bindings.

Unnished only.

Recommended

Par t s!

HNK-11 HNK-31

HNK-41

HNK-32

HNK-42

HNK-41/BLACK-B

HNK-42/PEARL-W

HNK-22

HNK-12

HNK-21


The ngerboard of unnished maple 1P neck is nished in sealer.



HNK-11 ST 21F Unnished

HNK-11F ST 21F Finished

HNK-11/22 ST 22F Unnished

HNK-11/22F ST 22F Finished

HNK-21 TC 21F UnnishedHNK-21F TC 21F Finished

HNK-21/22 TC 22F Unnished

HNK-21/22F TC 22F Finished


HNK-12 ST 21F Unnished

HNK-12F ST 21F Finished

HNK-12/22 ST 22F Unnished

HNK-12/22F ST 22F Finished

HNK-22 TC 21F UnnishedHNK-22F TC 21F Finished

HNK-22/22 TC 22F Unnished

HNK-22/22F TC 22F Finished

String Scale Nut Width Radius

HNK-11/95R & 12/95R 648mm 42mm 240R

HNK-21/95R & 22/95R 648mm 42mm 240R

HNK-11,12, 21, & 22 648mm 42mm 185R

HNK-11/22 & 12/22 648mm 42mm 305R

HNK-21/22 & 22/22 648mm 42mm 305R

HNK-31 & 32 864mm 41mm 240R

HNK-41 & 42 864mm 38mm 240R


HNK-32 PB 20F Unnished

HNK-32F PB 20F Finished

HNK-42 JB 20F Unnished

HNK-42F JB 20F Finished


HNK-31 PB 20F Unnished

HNK-31F PB 20F Finished

HNK-41 JB 20F Unnished

HNK-41F JB 20F Finished



The ngerboard of unnished maple 1P neck is nished in sealer.

Item# Fingerboard Inlays Bindings

HNK-41/BLACK-B Maple 1P Black Black

HNK-42/PEARL-W Rosewood Pearloid White


31/50








29

- HOSCO Parts - GP - Fretwire -

Recommended

Par t s!

Fretwire for Stringed Instruments

(Set of 30 w/Hosco packaging)Various kinds of fretwire is available. The regular models are

made of Nickel-silver.

Each fretwire is cut in 50cm long and curved slightly to install

onto fretboard easily.

Hardness: HV-175

The minimum order q’ty that we require was 30kg as rolled

fretwire before. However, we have started to sell the fretwire

at the small q’ty. One packaging consists of 30 fretwires and

the weight is approx. 600gram.

Also, the “Slightly Curved” is very helpful to install frets to n -

gerboard.

Good Point Of The “Slightly Curved” Cutted Fretwire

Please try this!

Rolled Fretwire (Min.30kg)Item# Crown A B C D E

FW-202 Jumbo 2.65 1.15 2.75 0.5 0.95

FW-214 Medium 2.4 1.2 2.8 0.6 0.95

FW-215 Jumbo 2.9 1.3 3.0 0.6 0.95 (Same as HF-J1)

FW-216 Jumbo 2.8 1.3 3.2 0.6 0.95

*If you would l ike to order rolled fretwire at the other sizes, please don’t hesitate to contact us!

A- Width of Crown

B- Height of Crown

C- Total Height

D- Width of Tang

E- Width of Tang w/Studs

*All the sizes above are in metric.

Reference

* HF-S1 is good as replacement frets for Martin and

Yamaha guitars.

** HF-S2 is good as replacement frets for Yamaha

guitars.

*** HF-M1 is good as replacement frets for Gibsonguitars.

**** HF-M3 has the same specication as the frets

that Fender uses. (Except width of tang)

Item# Crown A B C D E Reference

HF-S1 Small Standard 2.0 0.9 2.5 0.5 0.8 *

HF-S2 Small Standard 2.0 1.1 2.6 0.5 0.8 **

HF-M1 Medium Standard 2.4 1.4 2.9 0.5 0.8 ***

HF-M2 Medium Standard 2.4 1.3 2.8 0.6 0.95

HF-M3 Medium Standard 2.62 1.17 2.77 0.53 0.99 ****

HF-J1 Jumbo 2.9 1.3 3.0 0.6 0.95

HF-U1 for Mandolins, Banjos, & Ukuleles 1.4 0.6 1.9 0.45 (for at ngerboard)

HF-U2 for Mandolins, Banjos, & Ukuleles 1.1 0.85 2.0 0.45 (for at ngerboard)


32/50


30

- HOSCO Parts - GP - Truss Rods -

Carbon Fiber Neck Rods Truss Rod Washers

Truss Rod Nuts

Truss Rod Covers

These carbon rods will prevent necks from twisting.

You will experience very light weight!

Square shaped washer has became available.

Item# Description

TRW-SQ5 Square shaped, 5mm dia. hole

TRW-SQ6 6mm dia. hole

Fender -style

Item# Description

TRW-RD Round shaped, 5mm dia. hole

Gibson -style

Item# Description

TRW-HM5 Half-moon shaped, 5mm dia. hole

TRW-HM6 6mm dia. hole

Item# Description Weight

DM-CF1S 480 x 9.5 x 3.2 mm 24.4g

DM-CF1L 630 x 9.5 x 3.2 mm 32.0g

DM-CF2S 480 x 6.5 x 5.1 mm 25.0g

DM-CF2L 630 x 6.5 x 5.1 mm 32.8g

Traditional one-way style.

Nut & washer is not included.

Please refer to the nuts and washers on the right.

These truss rods can be adjusted with 5mm allen wrench.

Nut & washer is included.

Truss rod cover screws are sold separately.

Please order these truss rod covers with WS-02 screws.

Item# Total Length Description

F-2714 405 mm for Acoustic guitars

*Sizes are overall length including a truss rod nut.

Item# Description

WS-02 2.1 x 10 mm, Roundhead


DM-CF1&2

Truss Rods

Martin -style Truss Rods w/Aluminum U-channel

Truss Rod Cover Screw

Fender -style (Rod dia. 5mm)

Item# Length

F-TRF453 453mm

F-TRF587 587mm

Gibson -style (Rod dia. 5mm)

Item# Length

F-TRG438 438mm

F-TRG453 453mm

F-TRG550 550mm

F-TRG587 587mm


F-TRF

F-TRG

F-2714

TRW-SQ

TRW-RD

TRW-HM

TRN-10

TRT-60

F-4007 DM-802 DM-803 DM-804 DM-805

TRT-61 TRT-62 TRT-63

TRN-11 TRN-12 TRN-13(“non-Rohs”)

TRN-14(“non-Rohs”)

w/M5 hole

Item# Description Wrench Length

TRN-10 Bullet, Chrome 4 mm 25 mm

TRN-11 Cylinder, Nickel 5 mm 25 mm

TRN-12 Cylinder, Nickel, Slotted 20 mm

TRN-13 Hex Brass 8 mm 8 mm

TRN-14 Hex Brass 7 mm

Item# Description Wrench Length

TRT-60 Bullet, Nickel, M6 4 mm 25 mm

TRT-60G Bullet, Gold, M6 4 mm 25 mm

TRT-61 Cylinder, Nickel, M6 5 mm 25 mm

TRT-62 Slotted, Nickel, M6 25 mm

TRT-63 w/3.4 mm dia. side holes, M6 20 mm

Item# Description

F-4007 Bell shape, Black 2 Ply

DM-802 Black 2 PlyDM-803 Black 2 Ply

DM-804 Bell shape, Black 2 Ply w/letters

DM-805 Bell shape, Black 2 Ply w/letters

w/M6 hole


33/50








31

- HOSCO Parts - GP - Bindings / Binding Glue / Lining / Rosette -

BindingsCAB plastic is Cellulose-Acetate-Butyrate.

It was developed regarding safety instead of ammable

celluloid. Compared with ABS plastic, it is easier to bend

and harder to fade the color.

Please refer to the material chart below.



Binding Materials

Ivoroid (Celluloid)

Black (CAB or ABS Plastic)

Ivory (CAB or ABS Plastic)

White (CAB or ABS Plastic)

Tortoise (Celluloid)

Pearloid (Celluloid)

>>>1,350mm long x 1.5mm thick

Material: Celluloid

>6mm wide

Color Item#

Tortoise F-CT6015

Pearloid F-WP6015

Item# Description

F-P1515BWB 1,700 x 1.5 x 1.5mm (BK/WH/BK)

F-P1515WBW 1,700 x 1.5 x 1.5mm (WH/BK/WH)

F-P1510BW 1,700 x 1.5 x 1.0mm (BK/WH)F-P6015BWB 1,700 x 6.0 x 1.5mm (BK/WH/BK)

F-P6015WBW 1,700 x 6.0 x 1.5mm (WH/BK/WH)

F-P6010BW 1,700 x 6.0 x 1.0mm (BK/WH)


Material: ABS Plastic

>6mm wide >7mm wide

Color Item# Item#

Black F-AB6015 F-AB7015

Ivory F-AI6015 F-AI7015

White F-AW6015 F-AW7015


>6mm wide >7mm wide >10mm wide

Color Item# Item# Item#

Ivoroid F-5000 F-5003 F-5002

>10mm wide

Color Item#

Black F-AB1015

Ivory F-AI1015

White F-AW1015

Material: PVC Plastic

If you are not familiar with PVC bindings, please ask us for a

sample to test before you order.

Laminated Bindings

BWB BWB BWB

Kerfed Linings

Herringbone

KL3-UK-MA

143203D 151311H

171744D

KL1-SP/MA KL2-MA

These linings have a veneer on the back side.

They are very exible, so it’s easy to handle.

Sold as set of 4.

Item# Description

KL1-SP/MA 740 x 17 x 5mm, 2 pcs of each Spruce & Maho

KL2-MA 740 x 17 x 6mm, 4 pcs of Mahogany

KL3-UK-MA 700 x 10 x 4mm, 2 pcs of Mahogany

Beautiful Herringbone Rosette, Puring, and Back Strip is available.

Puring is curved for Dreadnought and it is sold as set of 2.

Item# Description

143203D Rosette, 126mm (inner dia.), 1.5mm thick 171744D Curved puring for Dreadnought, 1.5mm thick,

Set of 2

151311H Back strip, 530(L) x 4.5(W) x 3.0(T) mm

consists of 3 pieces

Minimum: 200pcs

Expiration : 1 year (plastic bottle)

date : 2-3 years (aluminum pack)

Item# Description

H-BG20AL Binding Glue, 20g w/aluminum packaging

H-BG20 Binding Glue, 20g

The super glue for our CAB bindings is now available.

1 package is enough for 1 guitar.

If there are oil, rubbish, and dust on an adhesion surface,

please wipe off with solvent such as alcohol or aceton.

Binding Glue

Note:

Because of the product’s proper-

ties, we ship this glue by ocean

freight only. Please confirm rules

and regulations for import to your

country before you order.

Please keep the glues

in a dark and cool place.

H-BG20AL

H-BG20


34/50


32

>>4mm diameter

Item# Description

MOP-4 Genuine Mother of Pearl

ABL-4 Genuine Abalone

DOT-IP-4.0 Acrylic White PearloidBPO-4 Black-lip Pearl Oyster

>>3mm diameter

Item# Description



DOT-IP-3.0 Acrylic White Pearloid

BPO-3 Black-lip Pearl Oyster

>>2mm diameter

Item# Description





>>5mm diameter

Item# Description





>>6mm diameter

Item# Description





Kluson style 3 on Plate M. Heads (GOTOH )

Conversion Bushings

Position Dot Marks Minimum: 100pcs each

Luminous Side Dot Materials

Genuine Abalone Puring Inlays

Pre-Cut Genuine M.O.P. Postion Marks

Side Dot Materials

2052NS*Including bushings

2052NSA

Item# Description

2052NS Nickel, w/White buttons

2052NSA 2052NS for slotted peghead

For installing GOTOH SD series machine heads to 10mm

diameter peg holes for Gotoh SG series machine heads.

These materials glow even in the dark scene like a concert

stage.

Item# Description

F-5030 Straight, 25.0 long x 1.6 wide x 1.6 thick (mm)

F-5031 Curved, 25.0 long x 1.6 wide x 1.6 thick (mm)

Item# Description

MOP-LP-C Block type, Set of 10

MOP-LP-S Crown type, Set of 9

Item# Color

BU-CBB Black

BU-CBN Nickel

BU-CBG Gold

Dot type Material: Acrylic /Celluloid

>>3.0mm dia.

Item# Description

DOT-S-BL3.0 Black with Luminous

DOT-S-WL3.0 White with Luminous

DOT-S-L3.0 Luminous only

>>2.0mm dia.

Item# Description

DOT-S-L2.0 Luminous only

Item# Description

DOT-SIDE-W White, 200mm long x 2.0mm dia, Material: Acety

DOT-SIDE-B Black, 200mm long x 2.0mm dia, Material: Acety

DOT-SIDE-W

F-5030

MOP-LP-C

MOP-LP-S

F-5031

DOT-SIDE-B

Beautiful 2.0mm thick pre-cut round dots.

- HOSCO Parts - GP - M.Head / Puring / Inlays / Dots -

Minimum: 100pcs eachPurings

DM-701

DM-702

Item# Color

DM-701 Abalone

DM-702 Pearloid

Material : Celluloid

>>>1,400mm long x 1.5mm thick x 1.5mm wide

15pcs per a set


35/50








33

- HOSCO Parts - GP - Shaped & Slotted Bones -

Shaped & Slotted Bone Materials

These nuts & saddles will save you a lot of work because each nut

and saddle are almost shaped and sanded.

All you will need to do is only minor adjustment!

Also, even if you purchase these in bulk, they will be packed in a

plastic bag with the reference sheet!

Nuts

Item# Length x Height x Thickness

HSB-NM1 43/44 x 9/10 x 5.8mm

HSB-NM2 44/45 x 9/10 x 5.7mmHSB-NS1 43 x 5 x 3.4mm (Curved top & bottom)

HSB-NG1 44 x 9.3 x 5mm

Saddles for Acoustic Guitars

Item# Length x Height x Thickness

HSB-ST1 71 x 9.2 x 3.1mm

HSB-SG1 71 x 11 x 3.3mm

HSB-SG2 79 x 9.5 x 7mm

- Reference sheet -

for Acoustic Guitars (Martin-style)

for Taylor-style

for Gibson-style

for Gibson-style (Adjustable type)

for Electric Guitars (Fender-style)

for Electric Guitars (Gibson-style)

Enlarged Photo of HSB Nuts

for Acoustic Guitars (Martin-style)

HSB-NM1

HSB-ST1

HSB-SG1

HSB-SG2

HSB-NS1

HSB-NG1

NG1 NM2 NM1

HSB-NM2


36/50


34

- HOSCO Parts - GP - Sound Offset Spacers -

Sound Offset SpacersDesign based on MTS theory

What is S.O.S.?

S.O.S. improves the intonation at

each fret.Easy installation to your instruments.

Designed and based on MTS theory

(Patent no. 4383272) to t major and

standard musical instruments simply.

Installation: Set S.O.S. between strings

and ngerboard side by nut.

What is MTS theory?

MTS is an ultimate guitar tuning system based on the laws

of physics.

All fretted instruments have fatal problem. That is, when

player pressed the strings at the fret, the string tension is up

and tone will be a little bit sharp, though the frets are set on

the correct position.Forerunners know this problem and they

tried to improve the pitch with compensated saddle and or

separated saddle.This kind of approach improves the pitch,

but not perfect.

MTS theory succeeded in improving the pitch as correct

as possible with Japanese technology.

Inventor, Minehara reserached all kind of problems be-

tween string tension and pitch gap. He tested various kind of

standard guitar strings in the world and checked these ten-

sions in his labo. Finally, he derived one formula to calculate

the corrected (offset) value from string material, guitar scale

and string height. The offset value means the adjustment

length from the original scale length. Adjustement length isnot only distance between nut and 12th fret but also 12th fret

to saddle for each string.

MTS can be applied to majority of the fretted instruments

and improve the pitch at each fret.

S.O.S was developed by Hosco with MTS theory(under

licensed). As S.O.S. is set at the nut area, it effects to improve

the pitch at the low fret area only. However, most of guitar

players feel its improvement well, because low fret area has a

big pitch gap.

Item# Scale String Material S.O.S. Thickness (4th/1st)

SOS-US1 340-350mm Nylon 1.4mm(3rd)/1.3mmSOS-US2 340-350mm Nylgut 1.4mm(3rd)/1.3mm

SOS-UC1 380-390mm Nylon 1.4mm(3rd)/1.3mm

SOS-UC2 380-390mm Nylgut 1.4mm(3rd)/1.3mm

For Soprano

For Soprano

For Concert

For Concert


SOS-CG1 640-650mm Nylon 1.6mm/1.6mm


SOS-EG1 628-650mm Nickel 1.3mm/1.2mm


SOS-AG1 643-650mm Bronze 1.3mm/1.2mm

SOS-US / SOS-UC

SOS-AG

SOS-EG

SOS-CG

For Acoustic

For Electric

For Classic


37/50








35

- HOSCO Parts - GP - Bone Nuts & Saddles -

Bone Nuts (Blank)

Item# Length Height Thickness

F-3401 83mm 8mm 2.4mm

F-3402 83mm 12mm 2.4mm

F-3403 83mm 12mm 6mm

F-3404 102mm 12mm 2.4mm

F-3405 83mm 8mm 3.2mm

F-3406 83mm 12mm 3.2mm

F-3

hosco parts catalog 2015

Documents