Kuwait University

College of Engineering & Petroleum

ENG202 - Statics

Homework #11

Name:

ID:

Date:

Dr. Ammar T. Al-Sayegh

Civil Engineering Department

College of Engineering & Petroleum

Kuwait University

Page 1 Dr. Ammar T. Al-Sayegh ENG202 - Statics

ID:Name: Problem:

Determine the internal normal force, shear force,

and moment at points A and B in the column.

1

Page 2

ID:Name:

Dr. Ammar T. Al-Sayegh ENG202 - Statics

Problem:

Page 3 Dr. Ammar T. Al-Sayegh ENG202 - Statics

ID:Name: Problem:

Determine the distance a as a

fraction of the beam’s length L

for locating the roller support

so that the moment in the

beam at B is zero.

2

Page 4

ID:Name:

Dr. Ammar T. Al-Sayegh ENG202 - Statics

Problem:

Page 5 Dr. Ammar T. Al-Sayegh ENG202 - Statics

ID:Name: Problem:

Determine the internal shear force

and moment at point C in the

double-overhang beam.

3

Page 6

ID:Name:

Dr. Ammar T. Al-Sayegh ENG202 - Statics

Problem:

Page 7 Dr. Ammar T. Al-Sayegh ENG202 - Statics

ID:Name: Problem:

Determine the internal

normal force, shear force,

and moment at points D and

E in the overhang beam.

Point D is located just to the

left of the roller support at B,

where the couple moment

acts.

4

Page 8

ID:Name:

Dr. Ammar T. Al-Sayegh ENG202 - Statics

Problem:

Page 9 Dr. Ammar T. Al-Sayegh ENG202 - Statics

ID:Name: Problem:

Determine the internal shear force

and moment at points D and E in the

compound beam. Pint E is located

just to the left of the 10-kN

concentrated load. Assume the

support at A is fixed and the

connection at B is a pin.

5

Page 10

ID:Name:

Dr. Ammar T. Al-Sayegh ENG202 - Statics

Problem: