home of subsea
DESCRIPTION
subsea facility sysemst subsea facility sysemst subsea facility sysemst vvTRANSCRIPT
TISI Library Accession List (April-June 2005) Page 1
TISI Library Accession List(April-June 2005)
ACCELERATED CORROSION TESTS ISO ISO 16701 2003 Corrosion of metals and alloys - Corrosion in artificial atmosphere -
Accelerated corrosion test involving exposure under controlled conditions of humidity clyclingand intermittent spraying of a salt solution / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ACCIDENT PREVENTION BSI BS EN 353-1 2002 Personal protective equipment against falls from a height - P.1: Guided
type fall arresters including a rigid anchor line / By British Standards Institution (BSI). London:BSI, 2002.
BS EN 354 2002 Personal protective equipment against falls from a height - Lanyards /By British Standards Institution (BSI). London: BSI, 2002.
BS EN 355 2002 Personal protective equipment against falls from a height - Energy absorbers/ By British Standards Institution (BSI). London: BSI, 2002.
BS EN 360 2002 Personal protective equipment against falls from a height -Retractable type fall arresters / By British Standards Institution (BSI). London: BSI, 2002.
IEC IEC/TR 60479-4 2004 Effects of current on human beings and livestock - P.4: Effects of
lightning strokes on human beings and livestock / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2004.
ACETYLENE
STANSA SANS 10260-3 2004 Industrial gas pipelines - P.3: Distribution of acetylene at consumer
sites / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
ACOUSTIC FILTERS IEC IEC 60862-2 2002 Surface acoustic wave (SAW) filters of assessed quality - P.2: Guidance
on use / By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2002.
ACOUSTIC MEASUREMENT
ISO ISO 3745 2003 Acoustics - Determination of sound power levels of noise sources using
sound pressure - Precision methods for anechoic and hemi-anechoic rooms / By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
STANSA SANS 10182 2004 The measurement and assessment of acoustic environment for
audiometric tests / By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 2
ACOUSTICS ISO ISO 11205 2003 Acoustics - Noise emitted by machinery and equipment - Engineering
method for the determination of emission sound pressure levels in situ at the work station andat other specified positions using sound intensit / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ACOUSTOELECTRIC DEVICES IEC IEC 61094-6 2004 Measurement microphones - P.6: Electrostatic actuators for
determination of frequency response / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
ACRYLONITRILE BUTADIENE STYRENE ISO ISO 7682 2003 Plastics piping systems for soil and waste discharge (low and high
temperature) inside buildings - Acrylonitrile-butadiene-styrene (ABS) / By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
ADHESION TESTS ISO ISO 9046 2002 Building construction - Jointing products - Determination of
adhesion/cohesion properties of sealants at constant temperature / By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2002.
ADHESIVE STRENGTH CSBTS GB/T 8642 2002 Thermal spraying - Determination of tensile adhesive strength / By
China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
ADHESIVES ISO ISO 9142 2003 Adhesives - Guide to the selection of standard laboratory ageing
conditions for testing bonded joints / By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2003.
AIR ISO ISO 10498 2004 Ambient air - Determination of sulfur dioxide - Ultraviolet fluorescence
method / By International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 15859-13 2004 Space systems - Fluid characteristics, sampling and test methods
- P.13: Breathing air / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
ISO 16000-4 2004 Indoor air - P.4: Determination of formaldehyde - Diffusive samplingmethod / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
TISI Library Accession List (April-June 2005) Page 3
AIRCRAFT PROPELLERS ISO ISO 15859-5 2004 Space systems - Fluid characteristics, sampling and test methods -
P.5: Nitrogen tetroxide propellants / By International Organization for Standardization (ISO).Geneva: ISO, 2004.
ISO 15859-6 2004 Space systems - Fluid characteristics, sampling and test methods -P.6: Monomethylhydrazine propellant / By International Organization for Standardization(ISO). Geneva: ISO, 2004.
ISO 15859-7 2004 Space systems - Fluid characteristics, sampling and test methods -P.7: Hydrazine propellant / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
ISO 15859-8 2004 Space systems - Fluid characteristics, sampling and test methods -P.8: Kerosine propellant / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
AMMONIA ISO ISO 15859-11 2004 Space systems - Fluid characteristics, sampling and test methods -
P.11: Ammonia / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ANAESTHETIC EQUIPMENT ISO ISO 5356-1 2004 Anaesthetic and respiratory equipment - Conical connectors - P.1: Cones
and sockets / By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO,2004.
ISO 7376 2003 Anaesthetic and respiratory equipment - Laryngoscopes for trachealintubation / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 8835-5 2004 Inhalational anaesthesia systems - P.5: Anaesthetic ventilators / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO/TS 16628 2003 Tracheobronchial tubes - Recommendations for size designation andlabelling / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ANGLES (METAL SECTIONS) CSBTS GB/T 13915 2002 Tolerance of angles for stampings / By China State Bureau of Quality
and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
ANIMAL FEED CSBTS GB/T 14700 2002 Determination of vitamin B1 in feeds / By China State Bureau of
Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 14701 2002 Determination of vitamin B2 in feeds / By China State Bureau of
Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 18868 2002 Method for determination of moisture, crude protein, crude fat, crude
fibre, lysine and methinione in feeds - Near infrared reflectance spectroscopy / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 4
ISO ISO 6888-3 2003 Microbiology of food and animal feeding stuffs - Horizontal method
for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and otherspecies) - P.3: Detection and MPN technique for low numbers / By International Organizationfor Standardization (ISO). Geneva; ISO, 2003.
STANSA SANS 11133-2 2004 Microbiology of food and animal feeding stuffs - Guidelines on
preparation and production of culture media - P.2: Practical guidelines on performance testingof culture media / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
ANTENNAE STANSA SANS 1252 2004 Passive antennas for the reception of VHF and UHF television and VHF
sound transmissions / By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
APPROVAL TESTING ISO ISO/IEC 15938-7 2003 Information technology - Multimedia content description
interface - P.7: Conformance testing / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ARC-WELDING EQUIPMENT
IEC IEC 60974-11 2004 Arc welding equipment - P.11: Electrode holders / By International
Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004. IEC 60974-8 2004 Arc welding equipment - P.8: Gas consoles for welding and plasma
cutting systems / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
ARGON
ISO ISO 15859-9 2004 Space systems - Fluid characteristics, sampling and test methods -
P.9: Argon / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ARITHMETIC
CSBTS GB/T 4886 2002 Control charts for arithmetic average with warning limits / By China
State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
ATOMIC ABSORPTION SPECTROPHOTOMETRY
STANSA SANS 6054 2004 Water - Chromium content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004. SANS 6171 2004 Water - Nickel content / By Standards South Africa (STANSA).
Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 5
AUDIO EQUIPMENT IEC IEC 62300 2004 Consumer audio/video equipment digital interface with plastic optical
fibre / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
AUDIO SYSTEMS IEC IEC 61937-7 2004 Digital audio - Interface for non-linear PCM encoded audio
bitstreams applying IEC 60958 - P.7: Non-linear PCM bitstreams according to the ATRAC,ATRAC2/3 and ATRAC-X formats / By International Electrotechnical Commission (IEC).2nd ed. Geneva: IEC, 2004.
IEC 62365 2004 Digital audio - Digital input-output interfacing - Transmission of digitalaudio over asynchronous transfer mode (ATM) networks / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2004.
AUDIOMETERS IEC IEC 60645-5 2004 Electroacoustics - Audiometric equipment - P.5: Instruments for the
measurement of aural acoustic impedance/admittance / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2004.
AUDIOVISUAL MATERIALS ISO ISO/IEC 14496-10 2003 Information technology - Coding of audio-visual objects -
P.10: Advanced video coding / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO/IEC 14496-14 2003 Information technology - Coding of audio-visual objects -P.14: MP4 file format / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
ISO/IEC 14496-8 2004 Information technology - Coding of audio-visual objects -P.8: Carriage of ISO/IEC 14496 contents over IP networks / By International Organizationfor Standardization (ISO). Geneva: ISO, 2004.
ISO/IEC TR 14496-9 2004 Information technology - Coding of audio-visual objects -P.9: Reference hardware description / By International Organization for Standardization (ISO).Geneva: ISO, 2004.
AUTOMATIC CONTROL SYSTEMS CSBTS GB/T 16656.34 2002 Industrial automation systems and integration - Product data
representation and exchange - P.34: Conformance testing methodology and framework:Abstract test methods for application protocol implementations / By China State Bureau ofQuality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 16656.520 2002 Industrial automation systems and integration - Product datarepresentation and exchange - P.520: Application interpreted construct: Associative draughtingelements / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 6
IEC IEC 61511-2 2003 Functional safety - Safety instrumented systems for the process
industry sector - P.2: Guidelines for the application of IEC 61511-1 / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2003.
IEC 61514-2 2004 Industrial process control systems - P.2: Methods of evaluatingthe performance of intelligent valve positioners with pneumatic outputs / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 60730-1 2003 Automatic electrical controls for household and similar use - P.1:General requirements / By International Electrotechnical Commission (IEC). 3rd ed.Geneva: IEC, 2003.
ISO ISO 9506-1 2003 Industrial automation systems - Manufacturing message specification -
P.1: Service definition / By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2003.
ISO/TS 10303-28 2003 Industrial automation systems and integration - Product datarepresentation and exchange - P.28: Implementation methods: XML representations ofEXPRESS schemas and data / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 10303-214 2003 Industrial automation systems and integration - Product datrepresentation and exchange - P.214: Application protocol: Core data for automotivemechanical design processes / By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2003.
ISO 10303-216 2003 Industrial automation systems and integration - Product datarepresentation and exchange - P.216: Application protocol: Ship moulded forms / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 10303-523 2004 Industrial automation systems and integration - Product datarepresentation and exchange - P.523: Application interpreted construct: Curve swept solid /By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15745-2 2003 Industrial automation systems and integration - Open systemsapplication integration framework - P.2: Reference description for ISO 11898-based controlsystems / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
AXIAL-THRUST BEARINGS CSBTS GB/T 307.4 2002 Rolling bearings - Thrust bearings - Tolerances / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
AXLES CSBTS GB/T 12814 2002 Axles for railway cars - Types and basic dimensions / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
BALL BEARINGS CSBTS GB/T 308 2002 Rolling bearings - Steel balls / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 7
GB/T 7217 2002 Rolling bearings - Radial ball bearings with flanged outer ring - Flangedimensions / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
BANKS ISO ISO 13616 2003 Banking and related financial services - International Bank Account
Number (IBAN) / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2003.
BAR CODES CSBTS GB/T 15425 2002 UCC/EAN - 128 bar code / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
BATH PRODUCTION IEC IEC PAS 61512-3 2004 Bath control - P.3: General and site recipe models and
representation / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
BELT DRIVES CSBTS GB/T 10412 2002 Grooved pulleys for classical and narrow V-belts (system based on
datum width) / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
ISO ISO 5287 2003 Belt drives - Narrow V-belts for the automotive industry - Fatigue test /
By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003.
BINS ISO ISO 15117-1 2004 Coal flow properties - P.1: Bin flow / By International Organization
for Standardization (ISO). Geneva: ISO, 2004.
BIOLOGICAL ANALYSIS AND TESTING STANSA SANS 10993-3 2004 Biological evaluation of medical devices - P.3: Tests for genotoxicity,
carcinogenicity and reproductive toxicity / By Standards South Africa (STANSA). Pretoria:STANSA, 2004.
BLAST-CLEANING STANSA SANS 5768 2004 Preparation of steel substrates before the application of paints and
related products - Test for the assessment of cleanliness of blast-cleaned steel surfaces - Photo-electric reflectance measurement / By Standards South Africa (STANSA). 2nd ed. Pretoria:STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 8
SANS 5775 2004 Preparation of steel substrates before the application of paints andrelated products - Surface roughness characteristics of blast-cleaned steel surfaces - Profileof blast- cleaned surfaces determined by metallographic section / By Standards South Africa(STANSA). 2nd ed. Pretoria: STANSA, 2004.
BLOOD TRANSFUSION EQUIPMENT ISO ISO 15747 2003 Plastics containers for intravenous injection / By International
Organization for Standardization (ISO). Geneva: ISO, 2003.
BOARD (PAPER) BSI BS EN 643 2002 Paper and board - European list of standard grades of recovered grades
of recovered paper and board / By British Standards Institution (BSI). London: BSI, 2002. CSBTS GB/T 4688 2002 Paper, board and pulps - Analysis of fiber furnish / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
BOATS ISO ISO 13590 2003 Small craft - Personal watercraft - Construction and system installation
requirements / By International Organization for Standardization (ISO). 2nd ed. Geneva; ISO,2003.
BRAKES CSBTS GB/T 18849 2002 Powered industrial trucks - Brake performance and components
strength / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
BRAKING CSBTS GB/T 5620 2002 Road vehicles - Braking of automative vehicles and their trailers -
Vocabulary / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
BRAKING SYSTEMS STANSA SANS 20013 2004 Uniform provisions concerning the approval of vehicles of categories
M, N and O with regard to braking / By Standards South Africa (STANSA). Pertoria:STANSA, 2004.
BREAKDOWN VOLTAGE CSBTS GB/T 507 2002 Insulating liquids - Determination of the breakdown voltage at power
frequenc / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 9
BRIDGES ISO ISO 14963 2003 Mechanical vibration and shock - Guidelines for dynamic tests and
investigations on bridges and viaducts / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
BUILDINGS IEC IEC 60364-7-712 2002 Electrical installations of buildings - P.7-712: Requirements
for special installations or locations - Solar photovoltaic (PV) power supply systems / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.
IEC 60364-4-42 2001 Electrical installations of buildings - P.4-42: Protection forsafety - Protection against thermal effects / By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC. 2001.
ISO ISO 9046 2002 Building construction - Jointing products - Determination of
adhesion/cohesion properties of sealants at constant temperature / By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2002.
ISO 22897 2003 Glass in building - Glazing and airborne sound insulation - Productdescriptions and determination of properties / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
BUOYANCY STANSA SANS 5258 2004 Buoyancy of fibre fillers for life jackets / By Standards South Africa
(STANSA). 3rd ed. Pretoria: STANSA, 2004.
BUSES STANSA SANS 20036 2004 Uniform provisions concerning the approval of large passenger
vehicles with regard to their general construction / By Standards South Africa (STANSA).Pretoria: STANSA, 2004.
SANS 20107 2004 Uniform provisions concerning the approval of double-deck largepassenger vehicles with regard to their general construction / By Standards South Africa(STANSA). Pretoria: STANSA, 2004.
CADMIUM ISO ISO 15238 2003 Solid mineral fuels - Determination of total cadmium content of coal /
By International Organization for Standardization (ISO). Geneva: ISO, 2003.
CAMPING EQUIPMENT STANSA SANS 10092 2004 Caravan parks / By Standards South Africa (STANSA). 3rd ed.
Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 10
CAPACITORS IEC IEC 60062 2004 Marking codes for resistors and capacitors / By International
Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2004.
CARAVANS ISO ISO 11555-1 2003 Road vehicles - Stabilizing devices for caravans and light trailers -
P.1: Integrated stabilizers / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
CARBON DIOXIDE ISO ISO 15859-12 2004 Space systems - Fluid characteristics, sampling and test methods -
P.12: Carbon dioxide / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
STANSA SANS 10260-4 2004 Industrial gas pipelines - P.4: Distribution of carbon dioxide at
consumer sites / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
CAST-IRON ISO ISO 6622-1 2003 Internal combustion engines - Piston rings - P.1: Rectangular rings
made of cast iron / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2003.
ISO/TR 15931 2004 Designation system for cast irons and pig irons / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2004.
CELLULAR CONCRETE BSI BS EN 990 2002 Test methods for verification of corrosion protection of reinforcement
in autoclaved aerated concrete and lightweight aggregate concrete with open structure / ByBritish Standards Institution (BSI). London: BSI, 2002.
CELLULAR MATERIALS ISO ISO 844 2004 Rigid cellular plastics - Determination of compression properties / By
International Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2004.
CENTRIFUGAL PUMPS BSI BS EN 1028-1 2002 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer -
P.1: Classification - General and safety requirements / By British Standards Institution (BSI).London: BSI, 2002.
BS EN 1028-2 2002 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer -P.2: Verification of general and safety requirements / By British Standards Institution (BSI).London: BSI, 2002.
TISI Library Accession List (April-June 2005) Page 11
CERAMICS ISO ISO 20501 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) -
Weibull statistics for strength data / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 20507 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) -Vocabular / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 20508 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) -Determination of light transmittance of ceramic films with transparent substrate / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 20509 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) -Determination of oxidation resistance of non-oxide monolithic ceramics / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
CHEESE ISO ISO 5534 2004 Cheese and processed cheese - Determination of the total solids content
(Reference method) / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2004.
CHEMICAL ANALYSIS AND TESTING ISO ISO/TR 19319 2003 Surface chemical analysis - Auger electron spectroscopy and X-ray
photoelectron spectroscopy - Determination of lateral resolution, analysis area, and sample areaviewed by the analyser / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
ISO 20341 2003 Surface chemical analysis - Secondary-ion mass spectrometry - Methodfor estimating depth resolution parameters with multiple delta-layer reference materials / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
STANSA SANS 5210 2004 Water - Nitrate and nitrite content / By Standards South Africa
(STANSA). 2nd ed. Pretoria: STANSA, 2004. SANS 5213 2004 Water - Dissolved solids content / By Standards South Africa
(STANSA). 2nd ed. Pretoria: STANSA, 2004. SANS 6050 2004 Water - Sodium content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004. SANS 6054 2004 Water - Chromium content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004. SANS 6168 2004 Water - Pretreatment for metal analysis / By Standards South Africa
(STANSA). Pretoria: STANSA, 2004.
CHROMIUM STANSA SANS 6054 2004 Water - Chromium content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 12
CLASSIFYING (DOCUMENTS) CSBTS GB/T 7027 2002 Basic principles and methods for information classifying and coding /
By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
CLEANING EQUIPMENT IEC IEC 60335-2-54 2002 Household and similar electrical appliances - Safety - P.2-54:
Particular requirements for surface-cleaning appliances for household use employing liquids orsteam / By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2004.
CLOSURES CSBTS GB/T 13251 2002 Packing containers - Closure of drums / By China State Bureau of
Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
CLOTH STANSA SANS 79 2004 Textiles - Mass per unit area of conditioned fabrics / By Standards South
Africa (STANSA). 4th ed. Pretoria: STANSA, 2004. SANS 1010 2004 Bunting / By Standards South Africa (STANSA). 3rd ed. Pretoria:
STANSA, 2004. SANS 1444-1 to 1444-8 2004 Schoolwear fabrics/ By Standards South Africa
(STANSA). 2nd ed. Pretoria: STANSA, 2004.P.1: Basic requirementsP.2: Blazer fabricsP.3: Polyester-and-woll fabricsP.4: Polyester-and-viscose fabricsP.5: Polyester-and-cotton fabricsP.6: Shirting and blouse fabricsP.7: Fabrics containing textured yarnsP.8: Warp-knitted fabrics
COAL ISO ISO 15117-1 2004 Coal flow properties - P.1: Bin flow / By International Organization
for Standardization (ISO). Geneva: ISO, 2004. ISO 15237 2003 Solid mineral fuels - Determination of total mercury content of coal /
By International Organization for Standardization (ISO). Geneva: ISO, 2003. ISO 15238 2003 Solid mineral fuels - Determination of total cadmium content of coal /
By International Organization for Standardization (ISO). Geneva: ISO, 2003.
COAL MINING STANSA SANS 10320 2004 South African guide to the systematic evaluation of coal resources and
coal reserves / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 13
COATINGS ISO ISO 8130-14 2004 Coating powders - P.14: Terminology / By International Organization
for Standardization (ISO). Geneva: ISO, 2004.
COAXIAL CABLES IEC IEC 61196-4 2004 Coaxial communication cables - P.4: Sectional specification for
radiating cables / By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC,2004.
CODING (DATA CONVERSION) ISO ISO/IEC 14496-8 2004 Information technology - Coding of audio-visual objects -
P.8: Carriage of ISO/IEC 14496 contents over IP networks / By International Organizationfor Standardization (ISO). Geneva: ISO, 2004.
ISO/IEC TR 14496-9 2004 Information technology - Coding of audio-visual objects -P.9: Reference hardware description / By International Organization for Standardization(ISO). Geneva: ISO, 2004.
ISO/IEC 14496-10 2003 Information technology - Coding of audio-visual objects -P.10: Advanced video coding / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
COLOUR-FASTNESS TESTS CSBTS GB/T 7568.4 2002 Textiles - Tests for colour fastness - Specification for polyester
adjacent fabric / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
GB/T 7568.5 2002 Textiles - Tests for colour fastness - Specification for acrylic adjacentfabric / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
GB/T 18886 2002 Textiles - Tests for fastness - Colour fastness to saliva / By ChinaState Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
COMBUSTION IEC IEC 61241-18 2004 Electrical apparatus for use in the presence of combustible dust -
P.18: Protection by encapsulation "mD" / By International Electrotechnical Commission (IEC).2nd ed. Geneva: IEC, 2004.
COMMUNICATION TECHNOLOGY CSBTS GB/T 17703.1 2002 International movement of goods governmental regulatory message -
P.1: United Nations standard - International movement of goods governmental regulatorymessage / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 14
GB/T 18784 2002 Quality of CAD/CAM data / By China State Bureau of Quality andTechnical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/Z 18786 2002 Contractor integrated technical information service (CITIS) / ByChina State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
ISO ISO/IEC 10021-1 2003 Information technology - Message Handling Systems (MHS) -
P.1: System and service overview / By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2003.
ISO 15075 2003 Transport information and control systems - In-vehicle navigationsystems - Communications message set requirements / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
COMPRESSION TESTING ISO ISO 293 2004 Plastics - Compression moulding of test specimens of thermoplastic
materials / By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO,2004.
ISO 844 2004 Rigid cellular plastics - Determination of compression properties / ByInternational Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2004.
COMPUTERIZED CONTROL CSBTS GB/T 18784 2002 Quality of CAD/CAM data / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
CONCENTRATES SAA AS 2862.1 1999 Copper, lead and zinc sulfide concentrates - Sampling - P.1: Sampling
procedures for determination of metal and moisture content / By Standards Australia (SAA).New South Wales: SAA, 1999.
CONCRETE ADMIXTURES BSI BS EN 480-13 2002 Admixtures for concrete, motar and grout - Test methods - P.13:
Reference masonry mortar for testing mortar admixtures / By British Standards Institution(BSI). London: BSI, 2002.
JSA JIS A6202 1997 Expansive additive for concrete / By Japanese Standards Association
(JSA). Tokyo: JSA, 1997.
CONICAL SHAPE
ISO ISO 5356-1 2004 Anaesthetic and respiratory equipment - Conical connectors - P.1:
Cones and sockets / By International Organization for Standardization (ISO). 3rd ed. Geneva:ISO, 2004.
TISI Library Accession List (April-June 2005) Page 15
CONSTRUCTION EQUIPMENT STANSA SANS 10085-1 2004 The design, erection, use and inspection of access scaffolding -
P.1: Steel access scaffolding / By Standards South Africa (STANSA). Pretoria: STANSA,2004.
CONSTRUCTION MATERIALS ISO ISO/TR 5660-3 2003 Reaction-to-fire tests - Heat release, smoke production and mass
loss rate - P.3: Guidance on measurement / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ISO 22897 2003 Glass in building - Glazing and airborne sound insulation - Productdescriptions and determination of properties / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
CONTAINERS ISO ISO 8362-4 2003 Injection containers and accessories - P.4: Injection vials made of moulded
glass / By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003. ISO 15747 2003 Plastics containers for intravenous injection / By International Organization
for Standardization (ISO). Geneva: ISO, 2003.
CONTROL CHARTS CSBTS GB/T 4886 2002 Control charts for arithmetic average with warning limits / By China
State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
CONTROL EQUIPMENT ISO ISO 16273 2003 Ships and marine technology - Night vision equipment for high-speed
craft - Operational and performance requirements, methods of testing and required test results /By International Organization for Standardization (ISO). Geneva: ISO, 2003.
CONVEYOR BELTS ISO ISO 284 2003 Conveyor belts - Electrical conductivity - Specification and test method /
By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003.
COOKING APPLIANCES IEC IEC 60335-2-36 2004 Household and similar electrical appliances - Safety - P.2-36:
Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements/ By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2004.
IEC 60335-2-39 2002 Household and similar electrical appliances - Safety - P.2-39:Particular requirements for commercial electric multi-purpose cooking pans / By InternationalElectrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 16
COPPER STANSA SANS 5203 2004 Water - Copper content / By Standards South Africa (STANSA).
3rd ed. Pretoria: STANSA, 2004.
CORROSION RESISTANCE ISO ISO 4404-2 2003 Petroleum and related products - Determination of the corrosion
resistance of fire-resistance hydraulic fluids - P.2: Non-aqueous fluids / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
CORROSION-RESISTANT STEELS ISO ISO 12289 2003 Aerospace - Rivets, solid, in corrosion-resisting steel - Procurement
specification / By International Organization for Standardization (ISO). Geneva: ISO, 2003.CRANES ISO ISO 4309 2004 Cranes - Wire ropes - Care, maintenance, installation, examination and
discard / By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2004. SAA AS 1418.1 2002 Cranes, hoists and winches - P.1: General requirements / By Standards
Australia (SAA). New South Wales: SAA, 2002.
CREEP TESTING JSA JIS K7116 1999 Plastics - Determination of creep behaviour - P.2: Flexural creep by
three-point loading / By Japanese Standards Association (JSA). Tokyo: JSA, 1999.CROSS-LINKED MATERIALS ISO ISO 15875-1 2003 Plastics piping systems for hot and cold water installations - Crosslinked
polyethylene (PE-X) - P.1: General / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15875-2 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.2: Pipes / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15875-3 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.3: Fittings / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
STANSA SANS 15875-2 2004 Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) - P.2: Pipes / By Standard South Africa (STANSA).Pretoria: STANSA, 2004.
SANS 15875-3 2004 Plastics piping systems for hot and cold water installations -Crosslinked polyethylene (PE-X) P.3: Fittings / By Standards South Africa (STANSA).Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 17
CYLINDRICAL SHAPE ISO ISO/TS 12180-1 2003 Geometrical Product Specifications (GPS) - Cylindricity - P.1:
Vocabulary an parameters of cylindrical form / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TS 12180-2 2003 Geometrical Product Specifications (GPS) - Cylindricity - P.2:Specification operators / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
DATA ANALYSIS IEC IEC 60300-3-2 2004 Dependability management - P.3-2: Application guide - Collection
of dependability data from the field / By International Electrotechnical Commission (IEC).2nd ed. Geneva: IEC, 2004.
ISO ISO 22029 2003 Standard file format for spectral data exchange / By International
Organization for Standardization (ISO). Geneva: ISO, 2003.
DATA REPRESENTATION CSBTS GB/T 16656.34 2002 Industrial automation systems and integration - Product data
representation and exchange - P.34: Conformance testing methodology and framework:Abstract test methods for application protocol implementations / By China State Bureauof Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 16656.520 2002 Industrial automation systems and integration - Product datarepresentation and exchange - P.520: Application interpreted construct: Associative draughtingelements / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
ISO ISO/TS 10303-28 2003 Industrial automation systems and integration - Product data
representation and exchange - P.28: Implementation methods: XML representations ofEXPRESS schemas and data / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 10303-216 2003 Industrial automation systems and integration - Product datarepresentation and exchange - P.216: Application protocol: Ship moulded forms / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 10303-523 2004 Industrial automation systems and integration - Product datarepresentation and exchange - P.523: Application interpreted construct: Curve swept solid /By International Organization for Standardization (ISO). Geneva: ISO, 2004.
DATA STRUCTURES IEC IEC/TR 61908 2004 The technology roadmap for industry data dictionary structures,
utilization and implementation / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 18
DATA TRANSMISSION IEC IEC/PAS 60603-7-3 2004 Connectors for electrocnic equipment - P.7-3: Detail
specification for 8-way, shielded, free and fixed connectors, for data transmissions withfrequencies up to 100 MHz / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
DENSITY MEASUREMENT ISO ISO 10119 2002 Carbon fibre - Determination of densit / By International Organization
for Standardization (ISO). 2nd ed. Geneva: ISO, 2002. STANSA SANS 79 2004 Textiles - Mass per unit area of conditioned fabrics / By Standards South
Africa (STANSA). 4th ed. Pretoria: STANSA, 2004.
DENTAL MATERIALS ISO ISO 16744 2003 Dentistry - Base metal materials for fixed dental restorations / By
International Organization for Standardization (ISO). Geneva: ISO, 2003.
DESIGNATIONS ISO ISO/TR 15931 2004 Designation system for cast irons and pig irons / By International
Organization for Standardization (ISO). Geneva: ISO, 2004. ISO/TS 16628 2003 Tracheobronchial tubes - Recommendations for size designation
and labelling / By International Organization for Standardization (ISO). Geneva: ISO, 2003. STANSA SANS 1700-3-2 1996 Fasteners - P.3: Forms, dimensions and designations - S.2:
Hexagon products - Widths across flats / By Standards South Africa (STANSA). Pretoria:STANSA, 1996.
DETAIL SPECIFICATION IEC IEC/PAS 60603-7-3 2004 Connectors for electrocnic equipment - P.7-3: Detail
specification for 8-way, shielded, free and fixed connectors, for data transmissions withfrequencies up to 100 MHz / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
DETERMINATION OF CONTENT CSBTS GB/T 8574 2002 Determination of potassium content for compound fertilizers - Potassium
tetraphenylborate gravimetric method / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 14700 2002 Determination of vitamin B1 in feeds / By China State Bureau ofQuality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 19
GB/T 14701 2002 Determination of vitamin B2 in feeds / By China State Bureau ofQuality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
ISO ISO 5534 2004 Cheese and processed cheese - Determination of the total solids content
(Reference method) / By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2004.
ISO/TS 9941 2003 Milk and canned evaporated milk - Determination of tin content -Spectrometric method / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
ISO 16000-4 2004 Indoor air - P.4: Determination of formaldehyde - Diffusive samplingmethod / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
STANSA SANS 5203 2004 Water - Copper content / By Standards South Africa (STANSA). 3rd ed.
Pretoria: STANSA, 2004. SANS 5207 2004 Water - Iron content / By Standards South Africa (STANSA). 3rd ed.
Pretoria: STANSA, 2004. SANS 5208 2004 Water - Lead content / By Standards South Africa (STANSA). 3rd ed.
Pretoria: STANSA, 2004. SANS 5210 2004 Water - Nitrate and nitrite content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004.
DIAGRAMS ISO ISO 14617-5 2002 Graphical symbols for diagrams - P.5: Measurement and control devices
/ By International Organization for Standardization (ISO). Geneva: ISO, 2003. ISO 14617-8 2003 Graphical symbols for diagrams - P.8: Valves and dampers / By
International Organization for Standardization (ISO). Geneva: ISO, 2003.
DIELECTRIC DEVICES IEC IEC 61337-1 2004 Filters using waveguide type dielectric resonators - P.1: Generic
specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 61337-2 2004 Filters using waveguide type dielectric resonators - P.2: Guidance
for use / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 61338-1 2004 Waveguide type dielectric resonators - P.1: Generic specification /
By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
DIMENSIONAL CHANGES BSI BS EN 318 2002 Wood based panels - Determination of dimensional changes associated
with changes in relative humidity / By British Standards Institution (BSI). London: BSI, 2002. CSBTS GB/T 8630 2002 Textiles - Determination of dimensional change in washing and
drying / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 20
DISHWASHING MACHINES IEC IEC 60436 2004 Electric dishwashers for household use - Methods for measuring
the performance / By International Electrotechnical Commission (IEC). 3rd ed. Geneva:IEC, 2004.
DISPLAY DEVICES (COMPUTERS) IEC IEC 61747-2-2 2004 Liquid crystal display devices - P.2-2: Matrix colour LCD modules
- Blank detail specification / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
IEC 61747-4-1 2004 Liquid crystal display devices - P.4-1: Matrix colour LCD modules- Essential ratings and characteristics / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
DOORS STANSA SANS 6124 2004 Wooden doors - Determination of resistance to torsion / By Standards
South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004. SANS 6182 2004 Wooden doors - Class 1 - Determination of resistance to weathering /
By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
DRAINAGE SAA AS/NZS 3500.3 2003 Plumbing and drainage - P.3: Stormwater drainage / By Standards
Australia (SAA). New South Wales: SAA, 2003. AS/NZS 3500.5 2000 National plumbing and drainage - P.5: Domestic installations / By
Standards Australia (SAA). New South Wales: SAA, 2000.
DRAINPIPES ISO ISO 7682 2003 Plastics piping systems for soil and waste discharge (low and high temperature) inside
buildings - Acrylonitrile-butadiene-styrene (ABS) / By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2003.
ISO 8770 2003 Plastics piping systems for soil and waste discharge (low and hightemperature) inside buildings - Polyethylene (PE) / By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2003.
ISO 23711 2003 Elastomeric seals - Requirements for materials for pipe joint seals usedin water and drainage applications - Thermoplastic elastomers / By International Organizationfor Standardization (ISO). Geneva: ISO, 2003.
DRILLING ISO ISO 6807 2003 Rubber hoses and hose assemblies for rotary drilling and vibration
applications - Specification / By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 21
ISO 10423 2003 Petroleum and natural gas industries - Drilling and production equipment -Wellhead and christmas tree equipment / By International Organization for Standardization(ISO). 3rd ed. Geneva: ISO, 2003.
DRILLING MACHINES ISO ISO 10423 2003 Petroleum and natural gas industries - Drilling and production equipment -
Wellhead and christmas tree equipment / By International Organization for Standardization(ISO). 3rd ed. Geneva: ISO, 2003.
ISO 14693 2003 Petroleum and natural gas industries - Drillng and well-servicingequipment / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
DROP TESTS IEC IEC/PAS 62050 2004 Board level drop test method of components for handheld
electronic products / By International Electrotechnical Commission (IEC). Geneva: IEC,2004.
DUMPERS TRUCKS ISO ISO 7132 2003 Earth-moving machinery - Dumpers - terminology and commercial
specifications / By International Organization for Standardization (ISO). 3rd ed. Geneva:ISO, 2003.
DYNAMIC TESTING ISO ISO 14963 2003 Mechanical vibration and shock - Guidelines for dynamic tests and
investigations on bridges and viaducts / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
EARPHONES ISO ISO 389-8 2004 Acoustics - Reference zero for the calibration of audiometric equipment
- P.8: Reference equivalent threshold sound pressure levels for pure tones and circumauralearphones / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ELASTOMERS ISO ISO 8871-3 2003 Elastomeric parts for parenterals and for devices for pharmaceutical use
- P.3: Determination of released-particle count / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ELECTRIC BALLASTS IEC IEC 60921 2004 Ballast for tubular fluorescent lamps - Performance requirements / By
International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 22
IEC 61347-2-3 2004 Lamp controlgear - P.2-3: Particular requirements for a.c. suppliedelectronic ballasts for fluorescent lamps / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
ELECTRIC CABLES IEC IEC 60332-1-1 2004 Tests on electric and optical fibre cables under fire conditions -
P.1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus /By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 60332-1-2 2004 Tests on electric and optical fibre cables under fire conditions - P.1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kWpre-mixed flame / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 60332-1-3 2004 Tests on electric and optical fibre cables under fire conditions -P.1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure fordetermination of flaming droplets/particles / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
IEC 60332-2-1 2004 Tests on electric and optical fibre cables under fire conditions - P.2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus /By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
ELECTRIC CONDUITS IEC IEC 60981 2004 Extra heavy-duty electrical rigid steel conduits / By International
Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004. IEC 61386-24 2004 Conduit systems for cable management - P.24: Particular
requirements - Conduit systems buried underground / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2004.
ELECTRIC CONNECTORS IEC IEC 60512-25-5 2004 Connectors for electronic equipment - Tests and measurements -
P.25-5: Test 25e - Return loss / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
IEC/PAS 60603-7-3 2004 Connectors for electrocnic equipment - P.7-3: Detailspecification for 8-way, shielded, free and fixed connectors, for data transmissions withfrequencies up to 100 MHz / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
ISO ISO 3732 2003 Road vehicles - Connectors for the electrical connection of towing and towed
vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage / ByInternational Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2003.
ELECTRIC CONTROL EQUIPMENT CSBTS GB/T 14048.3 2002 Low-voltage switchgear and controlgear - P.3: Switches, disconnectors,
switch-disconnectors and fuse-combination units / By China State Bureau of Quality andTechnical Supervision (CSBTS). Beijing: CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 23
IEC IEC/TR 62271-301 2004 High-voltage switchgear and controlgear - P.301: Dimensional
standardisation of terminals / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
STANSA SANS 60439-1 2004 Low-voltage switchgear and controlgear assemblies P.1: Type-
tested and partially type-tested assemblies / By Standards South Africa (STANSA). 3rd ed.Pretoria: STANSA, 2004.
ELECTRIC MEASUREMENT IEC IEC 62226-2-1 2004 Exposure to electric or magnetic fields in the low and intermediate
frequency range - Methods for calculating the current density and internal electric field inducedin the human body - P.2-1: Exposure to magnetic fields - 2D models / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
ELECTRIC POWER SYSTEMS IEC IEC 61800-3 2004 Adjustable speed electrical power drive systems - P.3: EMC
requirements and specific test methods / By International Electrotechnical Commission (IEC).2nd ed. Geneva: IEC, 2004.
ELECTRIC POWER TRANSMISSION LINES IEC IEC 60900 2004 Live working - Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. /
By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004. IEC 61472 2004 Live working - Minimum approach distances for a.c. systems in the
voltage range 72,5 kV to 800 kV - A method of calculation / By International ElectrotechnicalCommission (IEC). 2nd ed. Geneva: IEC, 2004.
ELECTRIC REACTORS BSI BS EN 60076-4 2002 Power transformers - P.4: Guide to the lightning impulse and
switching impulse testing - Power transformers and reactors / By British Standards Institution(BSI). London: BSI, 2002.
ELECTRIC REGULATORS IEC IEC 60730-1 2003 Automatic electrical controls for household and similar use - P.1:
General requirements / By International Electrotechnical Commission (IEC). 3rd ed. Geneva:IEC, 2003.
ELECTRIC SUPPLY METERS IEC IEC 62052-11 2003 Electricity metering equipment (AC) - General requirements, tests
and test conditions - P.11: Metering equipment / By International Electrotechnical Commission(IEC). Geneva: IEC, 2003.
TISI Library Accession List (April-June 2005) Page 24
ELECTRIC WIRES STANSA NRS 061-2 2004 Specification for overhead ground wire with optical fibre - P.2:
Installation guidelines / By Technology Standarization Department (TSD) and StandardsSouth Africa (STANSA). Pretoria: STANSA, 2004.
ELECTRICAL COMPONENTS IEC IEC 60068-2-58 2004 Environmental testing - P.2-58: Tests - Test Td: Test methods
for solderability, resistance to dissolution of metallization and to soldering heat of surfacemounting devices (SMD) / By International Electrotechnical Commission (IEC). 3rd ed.Geneva: IEC, 2004.
IEC 62137 2004 Environmental and endurance testing - Test methods for surface-mountboards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC/TR 62139 2004 Guidlines for the addition of environmental aspects in productstandards specific to TC 23 / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
ELECTRICAL CONDUCTIVITY ISO ISO 284 2003 Conveyor belts - Electrical conductivity - Specification and test method /
By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003.
ELECTRICAL ENCLOSURES STANSA SANS 60079-1 2004 Electrical apparatus for explosive gas atmospheres - P.1:
Flameproof enclosures / By Standards South Africa (STANSA). 3rd ed. Pretoria: STANSA,2004.
ELECTRICAL ENGINEERING IEC IEC 60050-141 2004 International elctrotechnical vocabulary - P.141: Polyphase systems
and circuits / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC/TR 60479-4 2004 Effects of current on human beings and livestock - P.4: Effects of
lightning strokes on human beings and livestock / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2004.
STANSA SANS 60695-11-10 2004 Fire hazard testing - P.11-10: Test flames - 50 W horizontal and
vertical flame test methods / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
ELECTRICAL EQUIPMENT BSI BS EN 50050 2001 Electrical apparatus for potentially explosive atmospheres -
Electrostatic hand-held spraying equipment / By British Standards Institution (BSI).London: BSI, 2001.
TISI Library Accession List (April-June 2005) Page 25
IEC IEC 61241-0 2004 Electrical apparatuas for use in the presence of combustible dust -
P.0: General requirements / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
IEC 61241-14 2004 Electrical apparatus for use in the presence of combustible dust -P.14: Selection and installation / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
IEC 61241-18 2004 Electrical apparatus for use in the presence of combustible dust -P.18: Protection by encapsulation "mD" / By International Electrotechnical Commission (IEC).2nd ed. Geneva: IEC, 2004.
ISO ISO 16750-2 2003 Road vehicles - Environmental conditions and testing for electrical
and electronic equipment - P.2: Electrical loads / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 16750-3 2003 Road vehicles - Environmental conditions and testing for electricaland electronic equipment - P.3: Mechanical loads / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ELECTRICAL HOUSEHOLD APPLIANCES CSBTS GB 4706.54 2002 Safety of household and similar electrical appliances - Particular
requirements for walk-behind and hand-held lawn trimmers and lawn edge trimmers / ByChina State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 60335-2-36 2004 Household and similar electrical appliances - Safety - P.2-36:
Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements/ By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2004.
IEC 60335-2-39 2002 Household and similar electrical appliances - Safety - P.2-39:Particular requirements for commercial electric multi-purpose cooking pans / By InternationalElectrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2004.
IEC 60335-2-41 2002 Household and similar electrical appliances - Safety - P.2-41:Particular requirements for pumps / By International Electrotechnical Commission (IEC). 3rd
ed. Geneva: IEC, 2002.
ELECTRICAL INSTALLATIONS CSBTS GB/T 7094 2002 Vibration (sinusoidal) test method for electrical installations in ships /
By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 60050-826 2004 International electrotechnical vocabulary - P.826: Electrical
installations / By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC,2004.
IEC 60364-7-712 2002 Electrical installations of buildings - P.7-712: Requirements forspecial installations or locations - Solar photovoltaic (PV) power supply systems / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2002.
TISI Library Accession List (April-June 2005) Page 26
ELECTRICAL INSULATING MATERIALS IEC IEC 61006 2004 Electrical insulating materials - Methods of test for the determination of
the glass transition temperature / By International Electrotechnical Commission (IEC). 2nd ed.Geneva: IEC, 2004.
IEC 62011-2 2004 Insutating materials - Industrial, rigid, moulded, laminated tubes androds of rectangulr and hexagonal cross-section, based on thermosetting resins for electricalpurposes - P.2: Methods of test / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
ELECTRICAL INSULATION IEC IEC 60505 2004 Evaluation and qualification of electrical insulation systems / By
International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC, 2004. IEC 61857-1 2004 Electrical insulation systems - Procedures for thermal evaluation -
P.1: General requirements - Low-voltage / By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2004.
IEC 61858 2004 Electrical insulation systems - Thermal evaluation of modifications toan established wire-wound EIS / By International Electrotechnical Commission (IEC). 2nd ed.Geneva: IEC, 2004.
ELECTRICAL MEASUREMENT IEC IEC 62226-1 2004 Exposure to electric or magnetic fields in the low and intermediate
frequency range - Methods for calculating the current density and internal electric field inducedin the human body - P.1: General / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
STANSA SANS 61000-4-4 2004 Electromagnetic compatibility (EMC) - P.4-4: Testing and
measurement techniques - Electrical fast transient/burst immunity test / By Standards SouthAfrica (STANSA). 2nd ed. Pretoria: STANSA, 2004.
ELECTRICAL MEASURING INSTRUMENTS IEC IEC/TR 62051-1 2004 Electricity metering - Data exchange for meter reading, tariff and
load control - Glossary of terms - P.1: Terms related to data exchange with metering equipmentusing DLMS/COSEM / By International Electrotechnical Commission (IEC). Geneva: IEC,2004.
ELECTRICAL MEDICAL EQUIPMENT IEC IEC/TR 60788 2004 Medical electrical equipment - Glossary of defined terms / By
International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 27
ELECTRICITY SUPPLY METERS IEC IEC 62053-21 2003 Electricity metering equipment (a.c.) - P.21: Static meters for active
energy (classes 1 and 2) / By International Electrotechnical Commission (IEC). Geneva: IEC,2003.
ELECTROMAGNETIC COMPATIBILITY (EMC) IEC IEC 61000-3-12 2004 Electromagnetic compatibility (EMC) - P.3-12: Limits - Limits for
harmonic currents produced by equipment connected to public low-voltage systems with inputcurrent >16 A and ≤ 75A per phase / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
IEC 61000-4-6 2003 Electromagnetic compatibility (EMC) - P.4-6: Testing andmeasurement techniques - Immunity to conducted disturbances, induced by radio-frequencyfields / By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004.
STANSA SANS 61000-4-4 2004 Electromagnetic compatibility (EMC) - P.4-4: Testing and
measurement techniques - Electrical fast transient/burst immunity test / By Standards SouthAfrica (STANSA). 2nd ed. Pretoria: STANSA, 2004.
TISI TIS 2161 2547 (2004) Personal computers and their functional components: Radio
disturbance limits /by Thai Industrial Standards Institute (TISI.). Bangkok: TISI., 2548.
ELECTROMAGNETIC RADIATION STANSA SANS 216-4-3 2004 Specification for radio disturbances and immunity measuring
apparatus and methods - P.4-3: Uncertainties, statistics and limit modelling - Statisticalconsiderations in the determination of EMC compliance of mass-produced products / ByStandards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
ELECTROMAGNETISM IEC IEC 61000-4-6 2003 Electromagnetic compatibility (EMC) - P.4-6: Testing and
measurement techniques - Immunity to conducted disturbances, induced by radio-frequencyfields / By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004.
ELECTRONIC EQUIPMENT AND COMPONENTS CSBTS GB/T 2423.22 2002 Environmental testing for electric and electronic products - P.2: Test
methods Test N: Change of temperature / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
GB/T 2424.13 2002 Environmental testing for electric and electronic products - P.2: Test methods -Guidance on change of temperature tests / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 28
IEC IEC 60297-3-101 2004 Mechanical structures for electronic equipment - Dimensions of
mechanical structures of the 482,6 mm (19 in) series - P.3-101: Subracks and associated plug-inunits / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 60297-3-102 2004 Mechanical structures for electronic equipment - Dimensions ofmechanical structures of the 482,6 mm (19 in) serires - P.3-102: Injector/extractor handle / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 60939-2-1 2004 Complete filter units for radio interference suppression - P.2-1:Blank detail specification - Passive filter units for electromagnetic interference suppression -Filters for which safety tests are required (assessment level D/DZ) / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
ELECTROSTATICS IEC IEC 61340-4-5 2004 Electrostatics - P.4-5: Standard test methods for specific
applications - Methods for characterizing the electrostatic protection of footwear and flooting incombination with a person / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
EMISSION IEC IEC 61000-3-12 2004 Electromagnetic compatibility (EMC) - P.3-12: Limits - Limits for
harmonic currents produced by equipment connected to public low-voltage systems with inputcurrent >16 A and ≤ 75A per phase / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
STANSA SANS 20047 2004 Uniform provisions concerning the approval of mopeds equipped with
a positive-ignition engine with regard to the emission of gaseous pollutants by the engine / ByStandards South Africa (STANSA). Pretoria: STANSA, 2004.
ENDURANCE TESTING IEC IEC 62137 2004 Environmental and endurance testing - Test methods for surface-mount
boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2004.
ENERGY SOURCES IEC IEC/TS 62257-3 2004 Recommendations for small renewable energy and hybrid systems
for rural electrification - P.3: Project development and management / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
ENGINEERING DRAWINGS ISO ISO 1101 2004 Geometrical Product Specifications (GPS) - Geometrical tolerancing -
Tolerances of form, orientation, location and run-out / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
TISI Library Accession List (April-June 2005) Page 29
ISO 3766 2003 Construction drawings - Simplified representation of concretereinforcement / By International Organization for Standardization (ISO).3r d ed. Geneva: ISO, 2003.
ENVIRONMENTAL ENGINEERING IEC IEC/TR 62139 2004 Guidlines for the addition of environmental aspects in product
standards specific to TC 23 / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
ENVIRONMENTAL TESTING CSBTS GB/T 2423.22 2002 Environmental testing for electric and electronic products - P.2: Test
methods Test N: Change of temperature / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 60068-2-58 2004 Environmental testing - P.2-58: Tests - Test Td: Test methods
for solderability, resistance to dissolution of metallization and to soldering heat of surfacemounting devices (SMD) / By International Electrotechnical Commission (IEC). 3rd ed.Geneva: IEC, 2004.
IEC 62137 2004 Environmental and endurance testing - Test methods for surface-mountboards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2004.
ISO ISO 16750-2 2003 Road vehicles - Environmental conditions and testing for electrical
and electronic equipment - P.2: Electrical loads / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
EPOXY RESINS ISO ISO 21048 2004 Plastics - Epoxy resins - Determination of 1,2-glycol content / By
International Organization for Standardization (ISO). Geneva: ISO, 2004.
EQUIPMENT SAFETY CSBTS GB/T 18831 2002 Safety of machinery - Interlocking devices associated with guards -
Principles for design and selection / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 61511-2 2003 Functional safety - Safety instrumented systems for the process
industry sector - P.2: Guidelines for the application of IEC 61511-1 / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2003.
IEC 62309 2004 Dependability of products containing reused parts - Requirements forfunctionality and tests / By International Electrotechnical Commission (IEC). Geneva: IEC,2004.
TISI Library Accession List (April-June 2005) Page 30
ESSENTIAL OILS ISO ISO 3809 2004 Oil and lime (cold pressed), Mexican type [Citrus aurantifolia (Christm.)
Swingle], obtained by mechanical means / By International Organization for Standardization(ISO). 3rd ed. Geneva: ISO, 2004.
ISO 8899 2003 Oil of lemon petitgrain [Citrus limon (L.) Burm. f.] / By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
EVAPORATED MILK ISO ISO/TS 9941 2003 Milk and canned evaporated milk - Determination of tin content -
Spectrometric method / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
EXPLOSIVE ATMOSPHERES IEC IEC 61241-0 2004 Electrical apparatuas for use in the presence of combustible dust -
P.0: General requirements / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
IEC 61241-14 2004 Electrical apparatus for use in the presence of combustible dust -P.14: Selection and installation / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
STANSA SANS 60079-1 2004 Electrical apparatus for explosive gas atmospheres -
P.1: Flameproof enclosures / By Standards South Africa (STANSA). 3r d ed.Pretoria: STANSA, 2004.
FABRIC TESTING STANSA SANS 79 2004 Textiles - Mass per unit area of conditioned fabrics / By Standards South
Africa (STANSA). 4th ed. Pretoria: STANSA, 2004.
FALLING-OBJECT PROTECTIVE STRUCTURES BSI BS EN 360 2002 Personal protective equipment against falls from a height - Retractable
type fall arresters / By British Standards Institution (BSI). London: BSI, 2002. BS EN 361 2002 Personal protective equipment against falls from a height - Full body
harnesses / By British Standards Institution (BSI). London: BSI, 2002.
FATIGUE TESTING ISO ISO 5287 2003 Belt drives - Narrow V-belts for the automotive industry - Fatigue test /
By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003. ISO 13003 2003 Fibre-reinforced plastics - Determination of fatigue properties under
cyclic loading conditions / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
TISI Library Accession List (April-June 2005) Page 31
FATS ISO ISO 3657 2002 Animal and vegetable fats and oils - Determination of saponification
value / By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2002.
FIBRE OPTIC CABLES IEC IEC PAS 60794-2-50 2004 Optical fibre cables - P.2-50: Indoor optical cables - Family
specification for simplex and duplex cables for use in patch cords / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
FIBRE OPTIC CONNECTORS IEC IEC 61753-053-3 2004 Fibre optic interconnecting devices and passive components
performance standard - P.053-3: Continuously variable attenuators for category U -Uncontrolled environment / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
IEC 61754-7 2004 Fibre optic connector interfaces - P.7: Type MPO connector family / ByInternational Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004.
IEC 62148-12 2004 Fibre optic active components and devices - Package and interfacestandards - P.12: Laser transmitters with a coaxial RF connector / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 62300 2004 Consumer audio/video equipment digital interface with plastic opticalfibre / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
FIBRE OPTICS IEC IEC 61300-2-44 2004 Fibre optic interconnecting devices and passive components -
Basic test and measurement procedures - P.2-44: Tests - Flexing of the strain relief of fibreoptic devices / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
FIBRES ISO ISO 13003 2003 Fibre-reinforced plastics - Determination of fatigue properties under
cyclic loading conditions / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
FIFTH WHEELS ISO ISO 4086 2001 Road vehicles - 90 semi-trailer fifth wheel kingpin - Interchangeability / By
International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2001.
FILAMENT LAMPS STANSA SANS 20037 2002 Uniform provisions concerning the approval of filament lamps for use
in approved lamp units of power-driven vehicles and of their trailers / By Standards SouthAfrica (STANSA). 2nd ed. Pretoria: STANSA, 2002.
TISI Library Accession List (April-June 2005) Page 32
FIRE ALARMS ISO ISO 12239 2003 Fire detection and fire alarm systems - Smoke alarms / By International
Organization for Standardization (ISO). Geneva: ISO, 2003.
FIRE DETECTORS ISO ISO 7240-5 2003 Fire detection and alarm systems - P.5: Point-type heat detectors / By
International Organization for Standardization (ISO). Geneva: ISO, 2003.
FIRE-RESISTANT MATERIALS ISO ISO 4404-2 2003 Petroleum and related products - Determination of the corrosion
resistance of fire-resistance hydraulic fluids - P.2: Non-aqueous fluids / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
ISO 20783-1 2003 Petroleum and related products - Determination of emulsion stabilityof fire-resistance fluids - P.1: Fluids in category HFAE / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 20783-2 2003 Petroleum and related products - Determination of emulsion stabilityof fire-resistance fluids - P.2: Fluids in category HF / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
FIRE SPRINKLERS ISO ISO 6182-11 2003 Fire protection - Automatic sprinkler systems - P.11: Requirements
and test methods for pipe hangers / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
FIRE TESTS CSBTS GB/T 5169.16 2002 Fire hazard testing for electric and electronic products - P.16: 50W
horizontal and vertical flame test methods / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 60332-1-1 2004 Tests on electric and optical fibre cables under fire conditions - P.1-1: Test
for vertical flame propagation for a single insulated wire or cable - Apparatus / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 60332-1-2 2004 Tests on electric and optical fibre cables under fire conditions - P.1-2:Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 60332-1-3 2004 Tests on electric and optical fibre cables under fire conditions - P.1-3:Test for vertical flame propagation for a single insulated wire or cable - Procedure fordetermination of flaming droplets/particles / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
IEC 60332-2-1 2004 Tests on electric and optical fibre cables under fire conditions - P.2-1:Test for vertical flame propagation for a single small insulated wire or cable - Apparatus / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 33
IEC 60332-2-2 2004 Tests on electric and optical fibre cables under fire conditions - P.2-2: Test forvertical flame propagation for a single small insulated wire or cable - Procedure for diffusionflame / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC/TS 60695-7-3 2004 Fire hazard testing - P.7-3: Toxicity of fire effluent - Use andinterpretation of test results / By International Electrotechnical Commission (IEC). 2nd ed.Geneva: IEC, 2004.
STANSA SANS 60695-11-10 2004 Fire hazard testing - P.11-10: Test flames - 50 W horizontal
and vertical flame test methods / By Standards South Africa (STANSA). Pretoria: STANSA,2004.
FITS CSBTS GB/T 304.3 2002 Spherical plain bearings - Fits / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 1101 2004 Geometrical Product Specifications (GPS) - Geometrical tolerancing -
Tolerances of form, orientation, location and run-out / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
FLAMEPROOF MATERIALS STANSA SANS 60079-1 2004 Electrical apparatus for explosive gas atmospheres
- P.1: Flameproof enclosures / By Standards South Africa (STANSA). 3r d ed.Pretoria: STANSA, 2004.
FLAMMABILITY ISO ISO 20823 2003 Petroleum and related products - Determination of the flammability
characteristics of fluids in contact with hot surfaces - Manifold ignition test / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
FLATNESS MEASUREMENT ISO ISO/TS 12781-1 2003 Geometrical Product Specifications (GPS) -
Flatness - P.1: Vocabulary and parameters of flatness / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
ISO/TS 12781-2 2003 Geometrical Product Specifications (GPS) -Flatness - P.2: Specification operators / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
FLEXIBLE PIPES ISO ISO 6807 2003 Rubber hoses and hose assemblies for rotary drill ing
and vibration applications - Specification / By International Organizationfor Standardization (ISO). 2n d ed. Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 34
ISO 10806 2003 Pipework - Fittings for corrugated metal hoses / By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
FLUORESCENT LAMPS IEC IEC 60921 2004 Ballast for tubular fluorescent lamps - Performance requirements / By
International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004. IEC 61347-2-3 2004 Lamp controlgear - P.2-3: Particular requirements for a.c. supplied
electronic ballasts for fluorescent lamps / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
FOOD PRODUCTS ISO ISO 6888-3 2003 Microbiology of food and animal feeding stuffs - Horizontal method
for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and otherspecies) - P.3: Detection and MPN technique for low numbers / By International Organizationfor Standardization (ISO). Geneva; ISO, 2003.
STANSA SANS 11133-2 2004 Microbiology of food and animal feeding stuffs - Guidelines on
preparation and production of culture media - P.2: Practical guidelines on performance testingof culture media / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
FOOTWEAR ISO ISO 17708 2003 Footwear - Test methods for whole shoe - Upper sole adhesion / By
International Organization for Standardization (ISO). Geneva: ISO, 2003. ISO 22653 2003 Footwear - Test methods for lining and insocks - Static friction / By
International Organization for Standardization (ISO). Geneva: ISO, 2003.
FORK TRUCKS ISO ISO 2330 2002 Fork-lift trucks - Fork arms - Technical characteristics and testing / By
International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2002.
FORMALDEHYDE ISO ISO 16000-4 2004 Indoor air - P.4: Determination of formaldehyde - Diffusive sampling
method / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
FUELS STANSA SANS 20067 2004 Uniform provisions concerning: - (i) approval of specific equipment
of motor vehicles using liquefied petroleum gases in their propulsion system; - (ii) approval ofa vehicle fitted with specific equipment for the use of liquefied petroleum gases in itspropulsion system with regard to the installation of such equipment / By Standards SouthAfrica (STANSA). Pretoria: Pretoria, 2004.
TISI Library Accession List (April-June 2005) Page 35
FUSES CSBTS GB/T 13539.1 2002 Low-voltage fuses - P.1: General requirements / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 60269-3-1 2004 Low-voltage fuses - P.3-1: Supplementary requirements for fuses
for use by unskilled persons (fuses mainly for household and similar applications) - Sections Ito IV: Examples of types of standardized fuses / By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2004.
FUSION WELDING ISO ISO 17637 2003 Non-destructive testing of welds - Visual testing of fusion-welded joints
/ By International Organization for Standardization (ISO). Geneva: ISO, 2003.
GAS CHROMATOGRAPHY ISO ISO 8974 2002 Plastics - Phenolic resins - Determination of residual phenol content by
gas chromatograph / By International Organization for Standardization (ISO). 3rd ed. Geneva:ISO, 2002.
ISO 11337 2004 Plastics - Polyamides - Determination of ε-caprolactam and ω-laurolactam by gas chromatography / By International Organization for Standardization (ISO).Geneva: ISO, 2004.
GAS PIPELINES STANSA SANS 10260-1 2004 Industrial gas pipelines - P1: Distribution of oxygen, nitrogen and
argon at consumer sites / By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA,2004.
SANS 10260-2 2004 Industrial gas pipelines - P.2: Distribution of hydrogen at consumersites / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
SANS 10260-3 2004 Industrial gas pipelines - P.3: Distribution of acetylene at consumersites / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
SANS 10260-4 2004 Industrial gas pipelines - P.4: Distribution of carbon dioxide atconsumer sites / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
GAS PIPES ISO ISO 11901-1 2003 Tools for preassing - Gas springs - P.1: General specifications / By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
GAS-POWERED DEVICES BSI BS EN 449 2002 Specification for dedicated liquefied petroleum gas appliances -
Domestic flueless space heaters (including diffusive catalytic combustion heaters) / By BritishStandards Institution (BSI). London: BSI, 2002.
TISI Library Accession List (April-June 2005) Page 36
GAS WELDING STANSA SANS 10268-4 2004 Welding of thermoplastics - Welding processes - P.4: Hot-gas
extrusion welding / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
GAS-WELDING EQUIPMENT BSI BS EN 561 2002 Gas welding equipment - Quick-action coupling with shut-off valves for
welding, cutting and allied processes / By British Standards Institution (BSI). London: BSI, 2002. STANSA SANS 1671-4 2004 Welding of thermoplastics - Machines and equipment - P.4: Hot-gas
extrusion welding / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
GATE VALVES STANSA SANS 1808-18 2004 Water supply and distribution system components - P.18: PVC-U
gate valves / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
GEAR DRIVES ISO ISO/TS 12104 2003 Road vehicles - Gearshift patterns - Manual transmissions with
power-assisted gearchange and automatic transmissions with manual-gearshift mode / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 18653 2003 Gears - Evaluation of instruments for the measurement of individualgears / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
GLASS ISO ISO 22897 2003 Glass in building - Glazing and airborne sound insulation - Product
descriptions and determination of properties / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
GLOW PLUGS ISO ISO 6550-3 2002 Road vehicles - Sheath-type glow-plugs with conical seating and their
cylinder head housing - P.3: M10 glow-plugs / By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2002.
GLYCOLS ISO ISO 21048 2004 Plastics - Epoxy resins - Determination of 1,2-glycol content / By
International Organization for Standardization (ISO). Geneva: ISO, 2004.
GRADES (QUALITY) BSI BS EN 643 2002 Paper and board - European list of standard grades of recovered grades
of recovered paper and board / By British Standards Institution (BSI). London: BSI, 2002.
TISI Library Accession List (April-June 2005) Page 37
GRAPHIC REPRESENTATION ISO ISO/TR 16044 2004 Graphic technology - Database architecture model and control
parameter coding for process control and workflow (Database AMPAC) / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2004.
GRAPHIC SYMBOLS CSBTS GB/T 16273.5 2002 Graphical symbols for use on equipment - P.5: Common symbols for
plastic machine / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
ISO ISO 14617-5 2002 Graphical symbols for diagrams - P.5: Measurement and control
devices / By International Organization for Standardization (ISO). Geneva: ISO, 2003. ISO 14617-8 2003 Graphical symbols for diagrams - P.8: Valves and dampers / By
International Organization for Standardization (ISO). Geneva: ISO, 2003.
GRAPHIC TECHNOLOGY ISO ISO 15930-4 2003 Graphic technology - Prepress digital data exchange using PDF - P.4:
Complete exchange of CMYK and spot colour printing data using PDF 1.4 (PDF/X-1a) / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 15930-5 2003 Graphic technology - Prepress digital data exchange using PDF - P.5:Partial exchange of printing data using PDF 1.4 (PDF/X-2) / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TR 16044 2004 Graphic technology - Database architecture model and controlparameter coding for process control and workflow (Database AMPAC) / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2004.
GRAPHICAL SYMBOLS ISO ISO/IEC Guide 74 2004 Graphical symbols - Technical guidelines for the consideration
of consumers' needs / By International Organization for Standardization (ISO). Geneva: ISO,2004.
HALOGENATED HYDROCARBONS CSBTS GB/T 18827 2002 1,1-Dichloro-1-fluoroethane for industrial use / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
HAND TOOLS IEC IEC 60900 2004 Live working - Hand tools for use up to 1000 V a.c. and 1 500 V d.c. /
By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 38
HEADLAMPS STANSA SANS 20008 2002 Uniform provisions concerning the approval of motor vehicle
headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped withhalogen filament lamps (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2 and/or H11) / ByStandards South Africa (STANSA). Pretoria: STANSA, 2002.
HEALTH SERVICES ISO ISO 21549-1 2004 Health informatics - Patient healthcard data - P.1: General structure /
By International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 21549-2 2004 Health informatics - Patient healthcard data - P.2: Common objects /
By International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 21549-3 2004 Health informatics - Patient healthcard data - P.3: Limited clinical
data / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
HEAT PUMPS CSBTS GB/T 18836 2002 Ducted air-conditioning (heat pump) units / By China State Bureau of
Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
HEATERS BSI BS EN 449 2002 Specification for dedicated liquefied petroleum gas appliances -
Domestic flueless space heaters (including diffusive catalytic combustion heaters) / By BritishStandards Institution (BSI). London: BSI, 2002.
HELIUM ISO ISO 15859-4 2004 Space systems - Fluid characteristics, sampling and test methods -
P.4: Helium / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
HIGH VOLTAGE IEC IEC/TR 62271-301 2004 High-voltage switchgear and controlgear - P.301: Dimensional
standardisation of terminals / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
HOISTS CSBTS GB 5226.2 2002 Safety of machinery - Electrical equipment of machines - P.32:
Requirements for hoisting machines / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
SAA AS 1418.1 2002 Cranes, hoists and winches - P.1: General requirements / By Standards
Australia (SAA). New South Wales: SAA, 2002.
TISI Library Accession List (April-June 2005) Page 39
HOLLOW SECTIONS CSBTS GB/T 6728 2002 Cold formed steel hollow sections for general structure - Dimensions,
shapes, weight and permissble deviations / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
HOUSEHOLD EQUIPMENT IEC IEC 60730-2-2 2001 Automatic electrical controls for household and similar use - P.2-2:
Particular requirements for thermal motor protectors / By International ElectrotechnicalCommission (IEC). 2nd ed. Geneva: IEC., 2001.
HOUSES ISO ISO 15928-1 2003 Houses - Description of performance - P.1: Structural safet / By
International Organization for Standardization (ISO). Geneva: ISO, 2003.
HYDRAULIC FLUIDS ISO ISO 4404-2 2003 Petroleum and related products - Determination of the corrosion
resistance of fire-resistance hydraulic fluids - P.2: Non-aqueous fluids / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
HYDRAULIC TRANSMISSION SYSTEMS ISO ISO 17559 2003 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test
methods to determine performance characteristics / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
HYDROGEN ISO ISO 15859-2 2004 Space systems - Fluid characteristics, sampling and test methods -
P.2: Hydrogen / By International Organization for Standardization (ISO). Geneva: ISO, 2004. STANSA SANS 10260-2 2004 Industrial gas pipelines - P.2: Distribution of hydrogen at consumer
sites / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
HYDROLOGY CSBTS GB/T 18522.2 2002 General specification for hydrometric instruments - P.2: Referential
operating condition / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
ICE CREAM IEC IEC 60335-2-24 2002 Household and similar electrical appliances - Safety - P.2-24:
Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers / ByInternational Electrotechnical Commission (IEC). 6th ed. Geneva: IEC, 2002.
TISI Library Accession List (April-June 2005) Page 40
IDENTIFICATION METHODS ISO ISO 14689-1 2003 Geotechnical investigation and testing - Identification and
classification of rock - P.1: Identification and description / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
IDENTITY CARDS ISO ISO/IEC 7816-6 2004 Identification cards - Integrated circuit cards - P.6: Interindustry
data elements for interchange / By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2004.
ISO/IEC 7816-8 2004 Identification cards - Integrated circuit cards - P.8: Commands forsecurity operations / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2004.
ISO/IEC 7816-9 2004 Identification cards - Integrated circuit cards - P.9: Commands forcard management / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2004.
IMPACT TESTING ISO ISO 3984 2004 Road vehicles - Rear moving barrier impact test procedure / By
International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2004.
IMPLANTS (SURGICAL)
ISO ISO 5833 2002 Implants for surgery - Acrylic resin cements / By International Organization
for Standardization (ISO). 2nd ed. Geneva: ISO, 2002. ISO 7206-10 2003 Implants for surgery - Partial and total hip-joint prostheses - P.10:
Determination of resistance to static load of modular femoral heads / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
ISO 13960 2003 Cardiovascular implants and artificial organs - Plasmafilters / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 15142-1 2003 Implants for surgery - Metal intramedullary nailing systems - P.1:Intramedullary nails / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
ISO 15142-2 2003 Implants for surgery - Metal intramedullary nailing systems - P.2:Locking components / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
IMPULSE-VOLTAGE TESTS
BSI BS EN 60076-4 2002 Power transformers - P.4: Guide to the lightning impulse and
switching impulse testing - Power transformers and reactors / By British Standards Institution(BSI). London: BSI, 2002.
TISI Library Accession List (April-June 2005) Page 41
INDUCTION MOTORS STANSA SANS 60034-26 2004 Rotating electrical machines - P.26: Effects of unbalanced voltages
on the performance of three-phase induction motors / By Standards South Africa (STANSA).Pretoria: STANSA, 2004.
INDUSTRIAL TRUCKS CSBTS GB/T 18849 2002 Powered industrial trucks - Brake performance and components
strength / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
INFORMATION ISO ISO/PAS 17684 2003 Transport information and control systems - In-vehicule navigation
systems - ITS message set translator to ASN.1 format definitions / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
ISO 18104 2003 Health informatics - Integration of a reference terminology model fornursing / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
INFORMATION EXCHANGE CSBTS GB/T 18783 2002 General purpose message / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 18785 2002 Commercial account summary message / By China State Bureau of
Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO/IEC 7816-6 2004 Identification cards - Integrated circuit cards - P.6: Interindustry
data elements for interchange / By International Organization for Standardization (ISO). 2nd
ed. Geneva: ISO, 2004. ISO/IEC 10021-2 2003 Information technology - Message Handling Systems (MHS):
Overall architecture / By International Organization for Standardization (ISO). 3rd ed. Geneva:ISO, 2003.
ISO 15745-2 2003 Industrial automation systems and integration - Open systemsapplication integration framework - P.2: Reference description for ISO 11898-based controlsystems / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 15930-4 2003 Graphic technology - Prepress digital data exchange using PDF - P.4:Complete exchange of CMYK and spot colour printing data using PDF 1.4 (PDF/X-1a) / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 15930-5 2003 Graphic technology - Prepress digital data exchange using PDF - P.5:Partial exchange of printing data using PDF 1.4 (PDF/X-2) / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 15930-6 2003 Graphic technology - Prepress digital data exchange - Use of PDF -P.6: Complete exchange of printing data suitable for colour-managed workflows using PDF 1.4(PDF/X-3) / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 42
INFORMATION SYSTEMS IEC IEC 61523-2 2002 Delay and power calculation standards - P.2: Pre-layout delay
calcultion specification for CMOS ASIC libraries / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2002.
INFORMATION TECHNOLOGY CSBTS GB/T 18238.2 2002 Information technology - Security techniques - Hash-functions - P.2:
Hash-functions using and n-bit block cipher / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 18238.3 2002 Information technology - Security techniques - Hash-functions - P.3:Dedicated hash-functions / By China State Bureau of Quality and Technical Supervision(CSBTS). Beijing: CSBTS, 2002.
ISO ISO/IEC 7816-8 2004 Identification cards - Integrated circuit cards - P.8: Commands for
security operations / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2004.
ISO/IEC 7816-9 2004 Identification cards - Integrated circuit cards - P.9: Commands forcard management / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2004.
ISO/IEC 14496-8 2004 Information technology - Coding of audio-visual objects - P.8:Carriage of ISO/IEC 14496 contents over IP networks / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
ISO/IEC 14662 2004 Information technology - Open - EDI reference model / ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.
ISO/IEC 18012-1 2004 Information technology - Home electronic system - Guidelinesfor product interoperability - P.1: Introduction / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
ISO/IEC 20113 2004 Information technology - Telecommunications and informationexchange between systems - Private Intergrated Service Network - Specification, functionalmodel and information flows - Make call request supplementary service / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2004.
ISO/IEC 20114 2004 Information technology - Telecommunications and informationexchange between systems - Private Intergrated Services Network (PISN) - Inter-exchangesignalling protocol - Make call request supplementary service / By International Organizationfor Standardization (ISO). Geneva: ISO, 2004.
ISO/IEC 20115 2004 Information technology - Telecommunications and informationexchange between systems - Private Intergrated Services Network - Use of QSIG for MessageCentre Access (MCA) profile standard / By International Organization for Standardization(ISO). Geneva: ISO, 2004.
ISO/IEC 20116 2004 Information technology - Telecommunications and informationexchange between systems - Private Intergrated Services Network - Specification, functionalmodel and information flows - Message centre monitoring and mailbox identificationsupplementary services / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
TISI Library Accession List (April-June 2005) Page 43
ISO/IEC 20117 2004 Information technology - Telecommunications and informationexchange between systems - Private Intergrated Services Network - Interexchange signallingprotocol - Message centre monitoring and mailbox identification supplementary services / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.
STANSA SANS 15504-4 2004 Information technology - Process assessment - P.4: Guidance on use
for process improvement and process capability determination / By Standards South Africa(STANSA). 2nd ed. Pretoria: STANSA, 2004.
INFORMATION THEORY IEC IEC/TR 61908 2004 The technology roadmap for industry data dictionary structures,
utilization and implementation / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
IEC/PAS 62030 2004 Digital data communications for measurement and control -Fieldbus for use in industrial control systems - S.1: MODBUS ® Application protocolspecification v.1.1a - S.2: Real-time publish-Subscribe (RTPS) wire protocol specificationversion 1.0 / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
INFRARED RADIATION CSBTS GB/T 18868 2002 Method for determination of moisture, crude protein, crude fat, crude
fibre, lysine and methinione in feeds - Near infrared reflectance spectroscop / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 61920 2004 Infrared free air applications / By International Electrotechnical
Commission (IEC). 2nd ed. Geneva: IEC, 2004.
INSULATED COATINGS IEC IEC 61086-3-1 2004 Coatings for loaded printed wire boards (conformal coatings) - P.3-
1: Specification for individual materials - Coatings for general purpose (Class 1), highreliability (Class 2) and aerospace (Class 3) / By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2004.
INSULATING COATINGS IEC IEC 61086-2 2004 Coatings for loaded printed wire boards (conformal coatings) -
P.2: Methods of test / By International Electrotechnical Commission (IEC). 2nd ed.Geneva: IEC, 2004.
INSULATING OILS CSBTS GB/T 507 2002 Insulating liquids - Determination of the breakdown voltage at power
frequenc / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 44
IEC IEC 60296 2003 Fluids for electrotechnical applications - Unused mineral insulating oils
for transformers and switchgear / By International Electrotechnical Commission (IEC). 3rd ed.Geneva: IEC, 2003.
INTEGRATED CIRCUITS IEC IEC 60747-16-10 2004 Semiconductor devices - P.16-10: Technology Approval
Schedule (TAS) for monolithic microwave integrated circuits / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 60748-1 2002 Semiconductor devices - Integrated circuits - P.1: General / ByInternational Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2002.
IEC 60748-23-1 2002 Semiconductor devices - Integrated circuits - P.23-1: Hybridintegrated circuits and film structures - Manufacturing line certification - Generic specification/ By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.
IEC 60748-23-2 2002 Semiconductor devices - Integrated circuits - P.23-2: Hybridintegrated circuits and film structures - Manufacturing line certification - Internal visualinspection and special tests / By International Electrotechnical Commission (IEC). Geneva:IEC, 2002.
IEC 60748-23-4 2002 Semiconductor devices - Integrated circuits - P.23-4: Hybridintegrated circuits and film structures - Manufacturing line certification - Blank detailspecification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2002.
ISO ISO/IEC 7816-8 2004 Identification cards - Integrated circuit cards - P.8: Commands for
security operations / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2004.
ISO/IEC 7816-9 2004 Identification cards - Integrated circuit cards - P.9: Commands forcard management / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2004.
INTERFACES IEC IEC 62365 2004 Digital audio - Digital input-output interfacing - Transmission of digital
audio over asynchronous transfer mode (ATM) networks / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2004.
ISO ISO 14915-2 2003 Software ergonomics for multimedia user interfaces - P.2: Multimedia
navigation and control / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
INTERFACES (DATA PROCESSING) IEC IEC 60488-1 2004 Higher performance protocol for the standard digital interface for
programmable instrumentation - P.1: General / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 45
ISO ISO/IEC 15938-7 2003 Information technology - Multimedia content description
interface - P.7: Conformance testing / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
INTERNAL COMBUSTION ENGINES BSI BS 7016-2 1988 Components and systems of reciprocating internal combustion engines -
P.2: Glossary of terms for main running gear / By British Standards Institution (BSI). London:BSI, 2001.
ISO ISO 6622-1 2003 Internal combustion engines - Piston rings - P.1: Rectangular rings
made of cast iron / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2003.
INTERNAL PRESSURE ISO ISO 15306 2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of
the resistance to cyclic internal pressure / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
IONS CSBTS GB/T 18809 2002 General specification for air ion measuring instruments / By China
State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
IRON CSBTS GB/T 1508 2002 Manganese ores - Determination of total iron content - Potassium
dichromate titrimetric method and 1,10- phenanthroline spectrophotometric method / By ChinaState Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
STANSA SANS 5207 2004 Water - Iron content / By Standards South Africa (STANSA). 3rd ed.
Pretoria: STANSA, 2004.
JOINTS ISO ISO 5356-1 2004 Anaesthetic and respiratory equipment - Conical connectors - P.1:
Cones and sockets / By International Organization for Standardization (ISO). 3rd ed. Geneva:ISO, 2004.
ISO 16670 2003 Timber structures - Joints made with mechanical fasteners - Quasi-staticreversed-cyclic test method / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
KARL FISCHER METHOD CSBTS GB/T 2947 2002 Determination of free water in urea and ammonium nitrate - Karl
Fischer method / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 46
GB/T 8577 2002 Determination of free water for compound fertilizers - Karl Fischermethod / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
KEROSINE ISO ISO 15859-8 2004 Space systems - Fluid characteristics, sampling and test methods -
P.8: Kerosine propellant / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
KNITTED FABRICS ISO ISO 8499 2003 Knitted fabrics - Description of defects - Vocabular / By International
Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003. STANSA SANS 5275 2004 Wales and courses per unit length in knitted textile fabrics (counting
glass method) / By Standards South Africa (STANSA). 4th ed. Pretoria: STANSA, 2004.
LABELLING (PROCESS) ISO ISO/TS 16628 2003 Tracheobronchial tubes - Recommendations for size designation and
labelling / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
LABORATORY TESTING ISO ISO 9142 2003 Adhesives - Guide to the selection of standard laboratory ageing
conditions for testing bonded joints / By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2003.
LAMP CAPS IEC IEC 60399 2004 Barrel thread for lampholders with shade holder ring / By International
Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004. IEC 60838-1 2004 Miscellaneous lampholders - P.1: General requirements and tests /
By International Electrotechnical Commission (IEC). 4th ed. Geneva: IEC, 2004.
LASERS IEC IEC 60825-2 2004 Safety of laser products - P.2: Safety of optical fibre communication
systems (OFCS) / By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC,2004.
IEC 60825-12 2004 Safety of laser products - P.12: Safety of free space opticalcommunication systems used for transmission of information / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC/TR 60825-14 2004 Safety of laser products - P.14: A user's guide / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 47
ISO ISO 11551 2003 Optics and optical instruments - Lasers and laser-related equipment -
Test method for absorptance of optical laser components / By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2003.
ISO 13695 2004 Optics and photonics - Lasers and laser-related equipment - Testmethods for the spectral characteristics of lasers / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
LEAD STANSA SANS 5208 2004 Water - Lead content / By Standards South Africa (STANSA). 3rd ed.
Pretoria: STANSA, 2004.
LEAD-ACID BATTERIES IEC IEC 60896-21 2004 Stationary lead-acid batteries - P.21: Valve regulated types -
Methods of test / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 60896-22 2004 Stationary lead-acid batteries - P.22: Valve regulated types -
Requirements / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
LIBRARY AND INFORMATION SCIENCE ISO ISO 15511 2003 Information and documentation - International Standard Identifier for
Libraries and Related Organizations (ISIL) / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ISO 15836 2003 Information and documentation - The Dublin Core metadata element set/ By International Organization for Standardization (ISO). Geneva: ISO, 2003.
LIFE JACKETS STANSA SANS 5258 2004 Buoyancy of fibre fillers for life jackets / By Standards South Africa
(STANSA). 3rd ed. Pretoria: STANSA, 2004.
LIFTS STANSA SANS 50081-70 2004 Safety rules for the construction and installation of lifts - Particular
applications for passenger and goods lifts - P.70: Accessibility to lifts for persons includingpersons with disability / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
LIFTS - INSTALLATION STANSA SANS 50081-70 2004 Safety rules for the construction and installation of lifts - Particular
applications for passenger and goods lifts - P.70: Accessibility to lifts for persons includingpersons with disabilit / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
LIGHTING - SYSTEMS ISO ISO 8995 2002 Lighting of indoor work places / By International Organization for
Standardization (ISO). 2nd ed. Geneva: ISO, 2002.
TISI Library Accession List (April-June 2005) Page 48
LIMES ISO ISO 3809 2004 Oil and lime (cold pressed), Mexican type [Citrus aurantifolia (Christm.)
Swingle], obtained by mechanical means / By International Organization for Standardization(ISO). 3rd ed. Geneva: ISO, 2004.
LINEAR DENSITY BSI BS EN 1007-2 2002 Advanced technical ceramics - Ceramic composites - Methods of
test for reinforcement - P.2: Determination of linear densit / By British Standards Institution(BSI). London: BSI, 2002.
LINEAR MEASUREMENT ISO ISO/TS 12180-1 2003 Geometrical Product Specifications (GPS) - Cylindricity -
P.1: Vocabulary an parameters of cylindrical form / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TS 12180-2 2003 Geometrical Product Specifications (GPS) - Cylindricity -P.2: Specification operators / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
LOAD CAPACITY BSI BS EN 846-4 2002 Methods of test for ancillary components for masonry - P.4:
Determination of load capacity and load-deflection characteristics of straps / By BritishStandards Institution (BSI). London: BSI, 2002.
LOW VOLTAGE CSBTS GB/T 13539.1 2002 Low-voltage fuses - P.1: General requirements / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 14048.3 2002 Low-voltage switchgear and controlgear - P.3: Switches,
disconnectors, switch-disconnectors and fuse-combination units / By China State Bureau ofQuality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 61857-1 2004 Electrical insulation systems - Procedures for thermal evaluation -
P.1: General requirements - Low-voltage / By International Electrotechnical Commission(IEC). 2nd ed. Geneva: IEC, 2004.
STANSA SANS 60439-1 2004 Low-voltage switchgear and controlgear assemblies P.1: Type-
tested and partially type-tested assemblies / By Standards South Africa (STANSA). 3rd ed.Pretoria: STANSA, 2004.
LOW-VOLTAGE EQUIPMENT IEC IEC 60269-3-1 2004 Low-voltage fuses - P.3-1: Supplementary requirements for fuses
for use by unskilled persons (fuses mainly for household and similar applications) - Sections Ito IV: Examples of types of standardized fuses / By International ElectrotechnicalCommission (IEC). 2nd ed. Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 49
LUBRICANTS CSBTS GB/T 12613.3 2002 Plain bearings - Wrapped bushes - P.3: Lubrication holes, lubrication
grooves and lubrication indentations / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
LUBRICATING SYSTEMS ISO ISO 10438-1 2003 Petroleum, petrochemical and natural gas industries - Lubrication,
shaft-sealing and control-oil systems and auxiliaries - P.1: General requirements / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 10438-2 2003 Petroleum, petrochemical and natural gas industries - Lubrication,shaft-sealing and control-oil systems and auxiliaries - P.2: Special-purpose oil systems / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 10438-3 2003 Petroleum, petrochemical and natural gas industries - Lubrication,shaft-sealing and control-oil systems and auxiliaries - P.3: General-purpose oil systems / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 10438-4 2003 Petroleum, petrochemical and natural gas industries - Lubrication,shaft-sealing and control-oil systems and auxiliaries - P.4: Self-acting gas seal support systems/ By International Organization for Standardization (ISO). Geneva: ISO, 2003.
LUMINAIRES IEC IEC 60598-1 2003 Luminaires - P.1: General requirements and tests / By International
Electrotechnical Commission (IEC). 6th ed. Geneva: IEC, 2003.
MAGNETIC-PARTICLE FLAW DETECTION ISO ISO 17638 2003 Non-destructive testing of welds - Magnetic particle testing / By
International Organization for Standardization (ISO). Geneva: ISO, 2003. STANSA SANS 9934-1 2004 Non-destructive testing - Magnetic particle testing - P.1: General
principles / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
MAN-MADE FIBRES STANSA SANS 5258 2004 Buoyancy of fibre fillers for life jackets / By Standards South Africa
(STANSA). 3rd ed. Pretoria: STANSA, 2004.
MANAGEMENT TECHNIQUES IEC IEC 60300-3-14 2004 Dependability management - P.3-14: Application guide -
Maintenance and maintenance support / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
ISO ISO 10019 2005 Guidelines for the selection of quality management system consultants
and use of their services / By International Organization for Standardization (ISO). Geneva:ISO, 2005.
TISI Library Accession List (April-June 2005) Page 50
MANGANESE ORES CSBTS GB/T 1508 2002 Manganese ores - Determination of total iron content - Potassium
dichromate titrimetric method and 1,10- phenanthroline spectrophotometric method / By ChinaState Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
MARINE ENGINES CSBTS GB/T 5745 2002 Marine disc separtor / By China State Bureau of Quality and Technical
Supervision (CSBTS). Beijing: CSBTS, 2002.
MARINE INSTRUMENTS ISO ISO 22090-2 2004 Ships and marine technology - Transmitting heading devices (THDs)
- P.2: Geomagnetic principles / By International Organization for Standardization (ISO).Geneva: ISO, 2004.
ISO 22090-3 2004 Ships and marine technology - Transmitting heading devices (THDs)- P.3: GNSS principles / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
MARKING CSBTS GB/T 10342 2002 Paper - Package and mark / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 60062 2004 Marking codes for resistors and capacitors / By International
Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2004. STANSA SANS 60034-8 2003 Rotating electrical machines - P.8: Terminal markings and direction
of rotation / By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2003.
MARKUP ISO ISO/TS 15000-1 2004 Electronic business eXtensible Markup Language (ebXML) - P.1:
Collaboration-protocol profile and agreement specification (ebCPP) / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2004.
ISO/TS 15000-2 2004 Electronic business eXtensible Markup Language (ebXML) - P.2:Message service specification (ebMS) / By International Organization for Standardization(ISO). Geneva: ISO, 2004.
ISO/TS 15000-3 2004 Electronic business eXtensible Markup Language (ebXML) - P.3:Registry information model specification (ebRIM) / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
ISO/TS 15000-4 2004 Electronic business eXtensible Markup Language (ebXML) - P.4:Registry services specification (ebRS) / By International Organization for Standardization(ISO). Geneva: ISO, 2004.
TISI Library Accession List (April-June 2005) Page 51
MASS STANSA SANS 79 2004 Textiles - Mass per unit area of conditioned fabrics / By Standards South
Africa (STANSA). 4th ed. Pretoria: STANSA, 2004.
MATERIALS IN CONTACT WITH FOOD SAA AS/NZS 4020 2002 Testing of products for use in contact with drinking water / By
Standards Australia (SAA). 4th ed. New South Wales: SAA, 2002.
MEASURING INSTRUMENTS ISO ISO 18653 2003 Gears - Evaluation of instruments for the measurement of individual
gears / By International Organization for Standardization (ISO). Geneva: ISO, 2003. STANSA SANS 216-1-4 2004 Radio disturbance and immunity measuring apparatus and methods
- P.1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment -Radiated disturbances / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
SANS 216-4-3 2004 Specification for radio disturbances and immunity measuringapparatus and methods - P.4-3: Uncertainties, statistics and limit modelling - Statisticalconsiderations in the determination of EMC compliance of mass-produced products / ByStandards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
MECHANICAL SHOCK ISO ISO 14963 2003 Mechanical vibration and shock - Guidelines for dynamic tests and
investigations on bridges and viaducts / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
MECHANICAL TESTING BSI BS EN 424 2002 Resilient floor coverings - Determination of the effect of simulated
movement of a furniture leg / By British Standards Institution (BSI). London: BSI, 2002. IEC IEC 60749-23 2004 Semiconductor devices - Mechanical and climatic test methods -
P.23: High temperature operating life / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
ISO ISO 16750-3 2003 Road vehicles - Environmental conditions and testing for electrical
and electronic equipment - P.3: Mechanical loads / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
MEDICAL EQUIPMENT BSI BS EN 405 2002 Respiratory protective devices - Valved filtering half masks to protect
against gases or gases and particles - Requirements, testing, marking / By British StandardsInstitution (BSI). London: BSI, 2002.
TISI Library Accession List (April-June 2005) Page 52
ISO ISO 7376 2003 Anaesthetic and respiratory equipment - Laryngoscopes for tracheal
intubation / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
MEDICAL INSTRUMENTS STANSA SANS 10993-3 2004 Biological evaluation of medical devices - P.3: Tests for
genotoxicity, carcinogenicity and reproductive toxicit / By Standards South Africa (STANSA).Pretoria: STANSA, 2004.
MERCURY ISO ISO 15237 2003 Solid mineral fuels - Determination of total mercury content of coal /
By International Organization for Standardization (ISO). Geneva: ISO, 2003. ISO 16772 2004 Soil quality - Determination of mercury in aqua regia soil extracts with
cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.
METADATA IEC IEC 82045-2 2004 Document management - P.2: Metadata elements and information
reference model / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. ISO ISO 15836 2003 Information and documentation - The Dublin Core metadata element set
/ By International Organization for Standardization (ISO). Geneva: ISO, 2003. ISO/IEC TR 20943-1 2003 Information technology - Procedures for achieving metadata
registry (MDR) content consistency - P.1: Data elements / By International Organization forStandardization (ISO). Geneva; ISO, 2003.
METAL COATINGS CSBTS GB/T 12599 2002 Metallic coatings - Electroplated coatings of tin - Specification and
test methods / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
METALS ISO ISO 9018 2003 Destructive tests on welds in metallic materials - Tensile test on
cruciform and lapped joints / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 16701 2003 Corrosion of metals and alloys - Corrosion in artificial atmosphere -Accelerated corrosion test involving exposure under controlled conditions of humidity clyclingand intermittent spraying of a salt solution / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
SAA AS 2862.1 1999 Copper, lead and zinc sulfide concentrates - Sampling - P.1: Sampling
procedures for determination of metal and moisture content / By Standards Australia (SAA).New South Wales: SAA, 1999.
TISI Library Accession List (April-June 2005) Page 53
AS 2862.2 1999 Copper, lead and zinc sulfide concentrates - Sampling - P.2:Experimental methods for checking the precision of sampling / By Standards Australia (SAA).New South Wales: SAA, 1999.
AS 2862.3 1999 Copper, lead and zinc sulfide concentrates - Sampling - P.3:Experimental methods for checking the bias of sampling / By Standards Australia (SAA).New South Wales: SAA, 1999.
STANSA SANS 4136 2004 Destructive tests on welds in metallic materials - Transverse tensile test
/ By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
MICROBIOLOGICAL ANALYSIS STANSA SANS 9998 2004 Water quality - Practices for evaluating and controlling microbiological
colony count media used in water quality tests / By Standards South Africa (STANSA).Pretoria: STANSA, 2004.
SANS 11133-2 2004 Microbiology of food and animal feeding stuffs - Guidelines onpreparation and production of culture media - P.2: Practical guidelines on performance testingof culture media / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
SANS 13843 2004 Water quality - Guidance on validation of microbiological methods /By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
MICROBIOLOGY ISO ISO 6888-3 2003 Microbiology of food and animal feeding stuffs - Horizontal method
for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and otherspecies) - P.3: Detection and MPN technique for low numbers / By International Organizationfor Standardization (ISO). Geneva; ISO, 2003.
MICROPHONES IEC IEC 61094-6 2004 Measurement microphones - P.6: Electrostatic actuators for
determination of frequency response / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
MICROPROCESSORS CSBTS GB/T 18787 2002 General specification for electronic book reader / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
MILK ISO ISO 5764 2002 Milk - Determination of freezing point - Thermistor cryoscope method
(Reference method) / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2002.
ISO/TS 9941 2003 Milk and canned evaporated milk - Determination of tin content -Spectrometric method / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
TISI Library Accession List (April-June 2005) Page 54
MINERALS BSI BS 6207-3 2001 Mineral insulated cables with a rated voltage not exceeding 750 V - P.3:
Guide to use / By British Standards Institution (BSI). London: BSI, 2001.
MODULUS OF ELASTICITY STANSA SANS 6015 2004 Modulus of elasticity and modulus of rupture in static bending of
fibreboards / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
MODULUS OF RUPTURE STANSA SANS 6015 2004 Modulus of elasticity and modulus of rupture in static bending of
fibreboards / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
MONOLITHIC MATERIALS ISO ISO 17565 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) - Test
method for flexural strength of monolithic ceramics at elevated temperature / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
MOPPED STANSA SANS 20047 2004 Uniform provisions concerning the approval of mopeds equipped with
a positive-ignition engine with regard to the emission of gaseous pollutants by the engine / ByStandards South Africa (STANSA). Pretoria: STANSA, 2004.
MORTARS BSI BS EN 480-13 2002 Admixtures for concrete, motar and grout - Test methods - P.13:
Reference masonry mortar for testing mortar admixtures / By British Standards Institution(BSI). London: BSI, 2002.
MOTOR VEHICLES STANSA SANS 20008 2002 Uniform provisions concerning the approval of motor vehicle
headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped withhalogen filament lamps (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1, HIR2 and/or H11) / ByStandards South Africa (STANSA). Pretoria: STANSA, 2002.
SANS 20067 2004 Uniform provisions concerning: - (i) approval of specific equipmentof motor vehicles using liquefied petroleum gases in their propulsion system;- (ii) approval of avehicle fitted with specific equipment for the use of liquefied petroleum gases in its propulsionsystem with regard to the installation of such equipment / By Standards South Africa(STANSA). Pretoria: Pretoria, 2004.
SANS 20107 2004 Uniform provisions concerning the approval of double-deck largepassenger vehicles with regard to their general construction / By Standards South Africa(STANSA). Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 55
MOULDING EQUIPMENT ISO ISO 8404 2003 Tools for moulding - Angle pins / By International Organization for
Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
MOWERS ISO ISO 17101 2004 Agricultural machinery - Rotary and flail mowers - Thrown-object test
and acceptance criteria / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
NATURAL GAS ISO ISO 10423 2003 Petroleum and natural gas industries - Drilling and production
equipment - Wellhead and christmas tree equipment / By International Organization forStandardization (ISO). 3rd ed. Geneva: ISO, 2003.
ISO 10438-1 2003 Petroleum, petrochemical and natural gas industries - Lubrication,shaft-sealing and control-oil systems and auxiliaries - P.1: General requirements / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 10438-2 2003 Petroleum, petrochemical and natural gas industries - Lubrication,shaft-sealing and control-oil systems and auxiliaries - P.2: Special-purpose oil systems / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 10438-3 2003 Petroleum, petrochemical and natural gas industries - Lubrication,shaft-sealing and control-oil systems and auxiliaries - P.3: General-purpose oil systems / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 10438-4 2003 Petroleum, petrochemical and natural gas industries - Lubrication,shaft-sealing and control-oil systems and auxiliaries - P.4: Self-acting gas seal support systems/ By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 14693 2003 Petroleum and natural gas industries - Drillng and well-servicingequipment / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 15156-2 2003 Petroleum and natural gas industries - Materials for use in H2 S-containing environments in oil and gas production - P.2: Cracking-resistant carbon and lowalloy steels, and the use of cast irons / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15156-3 2003 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - P.3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
NAVIGATION ISO ISO 15075 2003 Transport information and control systems - In-vehicle navigation
systems - Communications message set requirements / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 16273 2003 Ships and marine technology - Night vision equipment for high-speedcraft - Operational and performance requirements, methods of testing and required test results /By International Organization for Standardization (ISO). Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 56
NICKEL STANSA SANS 6171 2004 Water - Nickel content / By Standards South Africa (STANSA). Pretoria:
STANSA, 2004.
NICKEL-CADMIUM BATTERIES BSI BS EN 60993 2002 Electrolyte for vented nickel-cadmium cells / By British Standards
Institution (BSI). London: BSI, 2002.
NITRATES STANSA SANS 5210 2004 Water - Nitrate and nitrite content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004.
NITRITES STANSA SANS 5210 2004 Water - Nitrate and nitrite content / By Standards South Africa
(STANSA). 2nd ed. Pretoria: STANSA, 2004.
NITROGEN ISO ISO 15859-3 2004 Space systems - Fluid characteristics, sampling and test methods -
P.3: Nitrogen / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
NOISE (ENVIRONMENTAL) ISO ISO 11205 2003 Acoustics - Noise emitted by machinery and equipment - Engineering
method for the determination of emission sound pressure levels in situ at the work station and atother specified positions using sound intensity / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
STANSA SANS 10210 2004 Calculating and predicting road traffic noise / By Standards South
Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
NON-DESTRUCTIVE TESTING ISO ISO 17637 2003 Non-destructive testing of welds - Visual testing of fusion-welded joints
/ By International Organization for Standardization (ISO). Geneva: ISO, 2003. ISO 17638 2003 Non-destructive testing of welds - Magnetic particle testing / By
International Organization for Standardization (ISO). Geneva: ISO, 2003. STANSA SANS 3059 2004 Non-destructive testing - Penetrant testing and magnetic particle testing
- Viewing conditions / By Standards South Africa (STANSA). Pretoria: STANSA, 2004. SANS 9934-1 2004 Non-destructive testing - Magnetic particle testing - P.1: General
principles / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 57
SANS 9935 2004 Non-destructive testing - Penetrant flaw detectors - General technicalrequirements / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
SANS 12721 2004 Non-destructive testing - Thermal neutron radiographic testing -Determination of beam L/D ratio / By Standards South Africa (STANSA). Pretoria: STANSA,2004.
NUCLEAR-ELECTRIC POWER STATIONS IEC IEC 62241 2004 Nuclear power plants - Main control room - Alarm functions and
presentation / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 60709 2004 Nuclear power plants - Instrumentation and control systems important
to safety - Seperation / By International Electrotechnical Commission (IEC). 2nd ed. Geneva:IEC, 2004.
NUCLEAR FUELS ISO ISO 12800 2003 Nuclear fuel technology - Guide to the measurement of the specifc
surface area of uranium oxide powders by the BET method / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
NURSING ISO ISO 18104 2003 Health informatics - Integration of a reference terminology model for
nursing / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
OCEANGRAPHY CSBTS,. GB/T 7391 2002 Terminology of oceangraphic research ships / By China State Bureau
of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
OPTICAL FIBRES IEC IEC 60793-2-10 2004 Optical fibres - P.2-10: Product specifications - Product specification
for category A1 multimode fibres / By International Electrotechnical Commission (IEC). 2nd
ed. Geneva: IEC, 2004. IEC/TR 62048 2002 Optical fibres - Reliability - Power law theor / By International
Electrotechnical Commission (IEC). Geneva: IEC, 2002.
OPTICAL INSTRUMENTS ISO ISO 14135-1 2003 Optics and optical instruments - Specifications for telescopic sights
- P.1: General-purpose instruments / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ISO 14135-2 2003 Optics and optical instruments - Specifications for telescopic sights- P.2: High-performance instruments / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 58
OXIDATION METHODS ISO ISO 11357-6 2002 Plastics - Differential scanning calorimetry (DSC) - P.6: Determination
of oxidation induction time / By International Organization for Standardization (ISO).Geneva: ISO, 2002.
OXIDATION RESISTANCE ISO ISO 20509 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) -
Determination of oxidation resistance of non-oxide monolithic ceramics / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
OXYGEN ISO ISO 15859-1 2004 Space systems - Fluid characteristics, sampling and test methods -
P.1: Oxygen / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
PAINTS ISO ISO 16862 2003 Paints and varnishes - Evaluation of sag resistance / By International
Organization for Standardization (ISO). Geneva: ISO, 2003. ISO 21227-1 2003 Paints and varnishes - Evaluation of defects on coated surfaces using
optical imaging - P.1: General guidance / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
STANSA SANS 5768 2004 Preparation of steel substrates before the application of paints and
related products - Test for the assessment of cleanliness of blast-cleaned steel surfaces - Photo-electric reflectance measurement / By Standards South Africa (STANSA). 2nd ed. Pretoria:STANSA, 2004.
SANS 5775 2004 Preparation of steel substrates before the application of paints andrelated products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile ofblast- cleaned surfaces determined by metallographic section / By Standards South Africa(STANSA). 2nd ed. Pretoria: STANSA, 2004.
PALLETS ISO ISO 6780 2003 Flat pallets for intercontinental materials handling - Principal dimensions
and tolerances / By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO,2003.
PAPER BSI BS EN 643 2002 Paper and board - European list of standard grades of recovered grades
of recovered paper and board / By British Standards Institution (BSI). London: BSI, 2002. CSBTS GB/T 4688 2002 Paper, board and pulps - Analysis of fiber furnish / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 10342 2002 Paper - Package and mark / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 59
PAPER PULP CSBTS GB/T 4688 2002 Paper, board and pulps - Analysis of fiber furnish / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 8940.2 2002 Pulp - Preparation of laboratory sheets for the measurement of
brightness / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
GB/T 10740 2002 Pulp - Estimation of dirt and shives / By China State Bureau ofQuality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
PARTICLE BOARDS STANSA SANS 6012 2004 Thickness swelling and water absorption of fibreboards on immersion
in water / By Standards South Africa (STANSA). Pretoria: STANSA, 2004. SANS 6015 2004 Modulus of elasticity and modulus of rupture in static bending of
fibreboards / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
PARTICLE SIZE DISTRIBUTION JSA JIS R1619 1995 Testing method for size distribution of fine ceramic particles by liquid
photosedimentation method / By Japanese Standards Association (JSA). Tokyo: JSA, 1995.
PASSENGER TRANSPORT ISO ISO 3832 2002 Passenger cars - Luggage compartments - Method of measuring reference
volume / By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2002.
PENETRANT FLAW DETECTION STANSA SANS 9935 2004 Non-destructive testing - Penetrant flaw detectors - General technical
requirements / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
PERFORMANCE TESTING IEC IEC 60436 2004 Electric dishwashers for household use - Methods for measuring the
performance / By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC,2004.
ISO ISO 17559 2003 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test
methods to determine performance characteristics / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
STANSA SANS 11133-2 2004 Microbiology of food and animal feeding stuffs - Guidelines on
preparation and production of culture media - P.2: Practical guidelines on performance testingof culture media / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 60
PERSONAL PROTECTIVE EQUIPMENT BSI BS EN 353-1 2002 Personal protective equipment against falls from a height - P.1:
Guided type fall arresters including a rigid anchor line / By British Standards Institution(BSI). London: BSI, 2002.
BS EN 354 2002 Personal protective equipment against falls from a height - Lanyards/ By British Standards Institution (BSI). London: BSI, 2002.
BS EN 355 2002 Personal protective equipment against falls from a height - Energyabsorbers / By British Standards Institution (BSI). London: BSI, 2002.
BS EN 360 2002 Personal protective equipment against falls from a height -Retractable type fall arresters / By British Standards Institution (BSI). London: BSI, 2002.
BS EN 361 2002 Personal protective equipment against falls from a height - Full bodyharnesses / By British Standards Institution (BSI). London: BSI, 2002.
PESTICIDES CSBTS GB/T 8321.7 2002 Guideline for safety application of pesticides (VII) / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB 19336 2003 Abamectin technical / By China State Bureau of Quality and Technical
Supervision (CSBTS). Beijing: CSBTS, 2003.
PETROLEUM ISO ISO 10423 2003 Petroleum and natural gas industries - Drilling and production
equipment - Wellhead and christmas tree equipment / By International Organization forStandardization (ISO). 3rd ed. Geneva: ISO, 2003.
ISO 15156-2 2003 Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - P.2: Cracking-resistant carbon and lowalloy steels, and the use of cast irons / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15156-3 2003 Petroleum and natural gas industries - Materials for use in H2S -containing environments in oil and gas production - P.3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
PETROLEUM PRODUCTS ISO ISO 20783-1 2003 Petroleum and related products - Determination of emulsion stability
of fire-resistance fluids - P.1: Fluids in category HFAE / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 20783-2 2003 Petroleum and related products - Determination of emulsion stabilityof fire-resistance fluids - P.2: Fluids in category HF / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 20823 2003 Petroleum and related products - Determination of the flammabilitycharacteristics of fluids in contact with hot surfaces - Manifold ignition test / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 61
PETROLEUM TECHNOLOGY ISO ISO 15169 2003 Petroleum and liquid petroleum products - Determination of volume,
density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tankmeasurement systems / By International Organization for Standardization (ISO). Geneva: ISO,2003.
pH MEASUREMENT CSBTS GB/T 7573 2002 Textiles - Determination of pH of the aqueous extract / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
PHARMACEUTICAL TECHNOLOGY ISO ISO 8871-3 2003 Elastomeric parts for parenterals and for devices for pharmaceutical use
- P.3: Determination of released-particle count / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
PHENOLIC RESINS ISO ISO 8974 2002 Plastics - Phenolic resins - Determination of residual phenol content
by gas chromatograph / By International Organization for Standardization (ISO). 3rd ed.Geneva: ISO, 2002.
PHOTOGRAPHIC MATERIALS ISO ISO 18929 2003 Imaging materials - Wet-procesed silver-gelatin type black-and-white
photographic reflection prints - Specifications for dark storage / By International Organizationfor Standardization (ISO). Geneva: ISO, 2003.
PHYSICO-CHEMICAL METHODS ISO ISO 14594 2003 Microbeam analysis - Electron probe microanalysis - Guidelines
for the determination of experimental parameters for wavelength dispersive spectroscopy/ By International Organization for Standardization (ISO). Geneva: ISO, 2003.
PIGS (CASTINGS) ISO ISO/TR 15931 2004 Designation system for cast irons and pig irons / By International
Organization for Standardization (ISO). Geneva: ISO, 2004.
PINS (NAILS) ISO ISO 4086 2001 Road vehicles - 90 semi-trailer fifth wheel kingpin - Interchangeabilit /
By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2001.
PIPE COUPLINGS ISO ISO 23711 2003 Elastomeric seals - Requirements for materials for pipe joint seals used
in water and drainage applications - Thermoplastic elastomers / By International Organizationfor Standardization (ISO). Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 62
PIPE FITTINGS ISO ISO 8483 2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test
methods to prove the design of bolted flange joints / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 8533 2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Testmethods to prove the design of cemented or wrapped joints / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 10806 2003 Pipework - Fittings for corrugated metal hoses / By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
ISO 15590-2 2003 Petroleum and natural gas industries - Induction bends, fittings andflanges for pipeline transportation systems - P.2: Fittings / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 15874-3 2003 Plastics piping systems for hot and cold water installations -Polypropylene (PP) - P.3: Fittings / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15875-3 2003 Plastics piping systems for hot and cold water installations -Crosslinked polyethylene (PE-X) - P.3: Fittings / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
STANSA SANS 15875-3 2004 Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) P.3: Fittings / By Standards South Africa (STANSA).Pretoria: STANSA, 2004.
PIPELINES ISO ISO 9631 2003 Rubber seals - Joint rings for pipelines for hot-water supply up to 110
degrees C - Specification for the material / By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2003.
PIPES ISO ISO 8483 2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test
methods to prove the design of bolted flange joints / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 10468 2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination ofthe long-term specific ring creep stiffness under wet conditions and calculation of the wet creepfactor / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 10471 2003 Glass-reinforced thermosetting plastics - (GRP) pipes - Determinationof the long-term ultimate bending strain and the long-term ultimate relative ring deflectionunder wet conditons / By International Organization for Standardization (ISO). Geneva: ISO,2003.
ISO 14828 2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determinationof the long-term specific ring relaxation stiffness under wet conditions and calculation of thewet relaxation factor / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
TISI Library Accession List (April-June 2005) Page 63
ISO 15306 2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination ofthe resistance to cyclic internal pressure / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ISO 15874-2 2003 Plastics piping systems for hot and cold water installations - Polypropylene(PP) - P.2: Pipes / By International Organization for Standardization (ISO). Geneva: ISO,2003.
ISO 15875-2 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.2: Pipes / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15876-2 2003 Plastics piping systems for hot and cold water installations - Polybutylene(PB) - P.2: Pipes / By International Organization for Standardization (ISO). Geneva: ISO,2003.
ISO 15877-2 2003 Plastics piping systems for hot and cold water installations - Chlorinatedpoly (vinyl chloride) (PVC-C) - P.2: Pipes / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ISO 23711 2003 Elastomeric seals - Requirements for materials for pipe joint seals usedin water and drainage applications - Thermoplastic elastomers / By International Organizationfor Standardization (ISO). Geneva: ISO, 2003.
STANSA SANS 15875-2 2004 Plastics piping systems for hot and cold water installations - Crosslinked
polyethylene (PE-X) - P.2: Pipes / By Standard South Africa (STANSA). Pretoria: STANSA,2004.
SANS 15875-5 2004 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.5: Fitness for purpose of the system / By Standards South Africa(STANSA). Pretoria: STANSA, 2004.
PIPES - POLYETHYLENE STANSA SANS 15875-2 2004 Plastics piping systems for hot and cold water installations - Crosslinked
polyethylene (PE-X) - P.2: Pipes / By Standard South Africa (STANSA). Pretoria: STANSA,2004.
SANS 15875-3 2004 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) P.3: Fittings / By Standards South Africa (STANSA). Pretoria:STANSA, 2004.
SANS 15875-5 2004 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.5: Fitness for purpose of the system / By Standards South Africa(STANSA). Pretoria: STANSA, 2004.
PIPEWORK SYSTEMS ISO ISO 7671 2003 Plastics piping systems for soil and waste discharge (low and high temperature)
inside buildings - Polypropylene (PP) / By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 64
ISO 15874-5 2003 Plastics piping systems for hot and cold water installations - Polypropylene(PP) - P.5: Fitness for purpose of the system / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ISO/TS 15874-7 2003 Plastics piping systems for hot and cold water installations - Polypropylene(PP) - P.7: Guidance for the asessment of conformit / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 15875-1 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.1: General / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15875-5 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.5: Fitness for purpose of the system / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TS 15875-7 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.7: Guidance for the assessment of conformit / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
ISO 15876-1 2003 Plastics piping systems for hot and cold water installations -Polybutylene (PB) - P.1: General / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15876-5 2003 Plastics piping systems for hot and cold water installations -Polybutylene (PB) - P.5: Fitness for purpose of the system / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TS 15876-7 2003 Plastics piping systems for hot and cold water installations -Polybutylene (PB) - P.7: Guidance for the assessment of conformit / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
ISO/TS 15877-7 2003 Plastics piping systems for hot and cold water installations -Chlorinated poly(vinyl chloride) (PVC-C) - P.7: Guidance for the assessment of conformity /By International Organization for Standardization (ISO). Geneva: ISO, 2003.
STANSA SANS 15875-5 2004 Plastics piping systems for hot and cold water installations -
Crosslinked polyethylene (PE-X) - P.5: Fitness for purpose of the system / By Standards SouthAfrica (STANSA). Pretoria: STANSA, 2004.
PISTON RINGS ISO ISO 6622-1 2003 Internal combustion engines - Piston rings - P.1: Rectangular rings
made of cast iron / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2003.
PLAIN BEARINGS CSBTS GB/T 304.1 2002 Spherical plain bearings - Classification / By China State Bureau of
Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 304.3 2002 Spherical plain bearings - Fits / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 3944 2002 Spherical plain bearings - Vocabular / By China State Bureau of
Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 65
PLASTICS ISO ISO 75-1 2004 Plastics - Determination of temperature of deflection under load -
P.1: General test method / By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2004.
ISO 75-2 2004 Plastics - Determination of temperature of deflection under load -P.2: Plastics and ebonite / By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2004.
ISO 75-3 2004 Plastics - Determination of temperature of deflection under load -P.3: High-strength thermosetting laminates and long-fibre-reinforced plastics / ByInternational Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2004.
ISO 293 2004 Plastics - Compression moulding of test specimens of thermoplasticmaterials / By International Organization for Standardization (ISO). 3rd ed. Geneva:ISO, 2004.
ISO 844 2004 Rigid cellular plastics - Determination of compression properties / ByInternational Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2004.
ISO 2580-2 2003 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding andextrusion materials - P.2: Preparation of test specimens and determination of properties / ByInternational Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003.
ISO 6402-2 2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS)moulding and extrusion materials - P.2: Preparation of test specimens and determination ofproperties / By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO,2003.
ISO 10366-2 2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS)moulding and extrusion materials - P.2: Preparation of test specimens and determinationof properties / By International Organization for Standardization (ISO). 2nd ed. Geneva:ISO, 2003.
ISO 17282 2004 Plastics - Guide to the acquisition and presentation of design data / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 17771 2003 Plastics - Thermoset moulding compounds - Determination of thedegree of fibre wetting in SMC / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
JSA JIS K7100 1981 Standard atmospheres conditioning and testing of plastics / By Japanese
Standards Association (JSA). Tokyo: JSA, 1981. JIS K7116 1999 Plastics - Determination of creep behaviour - P.2: Flexural creep by
three-point loading / By Japanese Standards Association (JSA). Tokyo: JSA, 1999.
PLASTICS AND RUBBER TECHNOLOGY ISO ISO 17556 2003 Plastics - Determination of the ultimate aerobic biodegradability in soil
by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved /By International Organization for Standardization (ISO). Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 66
PLASTICS-WORKING MACHINERY CSBTS GB/T 16273.5 2002 Graphical symbols for use on equipment - P.5: Common symbols for
plastic machine / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
PNEUMATIC EQUIPMENT ISO ISO 5391 2003 Pneumatic tools and machines - Vocabulary / By International Organization
for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
PNEUMATIC TRANSMISSION SYSTEMS ISO ISO 17082 2004 Pneumatic fluid power - Valves - Data to be included in supplier literature / By
International Organization for Standardization (ISO). Geneva: ISO, 2004.
POLYAMIDES ISO ISO 11337 2004 Plastics - Polyamides - Determination of ε-caprolactam and ω-laurolactam
by gas chromatography / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
POLYBUTYLENE ISO ISO 15876-1 2003 Plastics piping systems for hot and cold water installations - Polybutylene
(PB) - P.1: General / By International Organization for Standardization (ISO). Geneva: ISO,2003.
ISO 15876-2 2003 Plastics piping systems for hot and cold water installations - Polybutylene(PB) - P.2: Pipes / By International Organization for Standardization (ISO). Geneva: ISO,2003.
ISO 15876-3 2003 Plastics piping systems for hot and cold water installations - Polybutylene(PB) - P.3: Fittings / By International Organization for Standardization (ISO). Geneva: ISO,2003.
ISO 15876-5 2003 Plastics piping systems for hot and cold water installations - Polybutylene(PB) - P.5: Fitness for purpose of the system / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TS 15876-7 2003 Plastics piping systems for hot and cold water installations - Polybutylene(PB) - P.7: Guidance for the assessment of conformity / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
POLYETHYLENE ISO ISO 8770 2003 Plastics piping systems for soil and waste discharge (low and high temperature)
inside buildings - Polyethylene (PE) / By International Organization for Standardization (ISO).2nd ed. Geneva: ISO, 2003.
ISO 15875-1 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.1: General / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 67
ISO 15875-2 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.2: Pipes / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15875-3 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.3: Fittings / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15875-5 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.5: Fitness for purpose of the system / By International Organizationfor Standardization (ISO). Geneva: ISO, 2003.
ISO/TS 15875-7 2003 Plastics piping systems for hot and cold water installations - Crosslinkedpolyethylene (PE-X) - P.7: Guidance for the assessment of conformity / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
POLYMERS ISO ISO 11357-6 2002 Plastics - Differential scanning calorimetry (DSC) - P.6: Determination
of oxidation induction time / By International Organization for Standardization (ISO).Geneva: ISO, 2002.
ISO 11357-7 2002 Plastics - Differential scanning calorimetry (DSC) - P7: Determinationof crystallization kinetics / By International Organization for Standardization (ISO).Geneva: ISO, 2002.
POLYPROPYLENE ISO ISO 7671 2003 Plastics piping systems for soil and waste discharge (low and high
temperature) inside buildings - Polypropylene (PP) / By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2003.
ISO 15874-1 2003 Plastics piping systems for hot and cold water installations - Polypropylene(PP) - P.1: General / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
ISO 15874-2 2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP)P.2: Pipes / By International Organization for Standardization (ISO). Geneva: ISO,2003.
ISO 15874-3 2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP)- P.3: Fittings / By International Organization for Standardization (ISO). Geneva: ISO,2003.
ISO 15874-5 2003 Plastics piping systems for hot and cold water installations - Polypropylene (PP)- P.5: Fitness for purpose of the system / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TS 15874-7 2003 Plastics piping systems for hot and cold water installations -Polypropylene (PP) - P.7: Guidance for the asessment of conformit / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
POLYSTYRENE ISO ISO 2897-2 2003 Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion
materials - P.2: Preparation of test specimens and determination of properties / By InternationalOrganization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 68
POLYVINYLIDENE CHLORIDE ISO ISO 15877-1 2003 Plastics piping systems for hot and cold water installations - Chlorinated poly (vinyl
chloride) (PVC-C) - P.1: General / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 15877-2 2003 Plastics piping systems for hot and cold water installations - Chlorinated poly (vinylchloride) (PVC-C) - P.2: Pipes / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO/TS 15877-7 2003 Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - P.7: Guidance for the assessment of conformity / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
POTASSIUM CSBTS GB/T 8574 2002 Determination of potassium content for compound fertilizers - Potassium
tetraphenylborate gravimetric method / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
POWER CABLES CSBTS GB/T 12706.1-12706.4 2002 Power cables with extruded insulation and their accessories
for rated voltages from 1 kV (Um =1.2 kV) up to 35 kV (Um = 40.5 kV) / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
P.1: Cables for rated voltages of 1 kV (Um = 1.2 kV) and 3 kV (Um = 3.6 kV)P.2: Cables for rated voltages from 6 kV (Um = 7.2 kV) up to 30 kV (Um = 36 kV)P.3: Cables for rated voltage of 35 kV (Um = 40.5 kV)P.4: Test requirements on accessories for cables with rated voltages from 6 kV (Um 7.2
kV) up to 35 kV Um = 40.5 kV)
POWER TRANSFORMERS BSI BS EN 60076-4 2002 Power transformers - P.4: Guide to the lightning impulse and
switching impulse testing - Power transformers and reactors / By British Standards Institution(BSI). London: BSI, 2002.
PRECAST CONCRETE BSI BS 8297 2000 Code of practice for design and installation of non-loadbearing precast
concrete cladding / By British Standards Institution (BSI). London: BSI, 2000.
PRECISION SAA AS 2862.2 1999 Copper, lead and zinc sulfide concentrates - Sampling - P.2: Experimental methods for
checking the precision of sampling / By Standards Australia (SAA). New South Wales: SAA,1999.
TISI Library Accession List (April-June 2005) Page 69
PREFERRED NUMBERS STANSA SANS 10003 2004 Preferred numbers - Series of preferred numbers / By Standards South
Africa (STANSA). Pretoria: STANSA, 2004.
PRESS TOOLS ISO ISO 11901-1 2003 Tools for preassing - Gas springs - P.1: General specifications / By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003. ISO 11901-2 1995 Tools for pressing - Gas springs - P.2: Specification of accessories /
By International Organization for Standardization (ISO). Geneva: ISO, 1995.
PRESSURE PIPES STANSA SANS 966-1 2004 Components of pressure pipe systems - P.1: Unplasticized poly (vinyl chloride)
(PVC-U) pressure pipe systems / By Standards South Africa (STANSA). 3rd ed. Pretoria: STANSA,2004.
PRESSURE REGULATORS STANSA SANS 10260-1 2004 Industrial gas pipelines - P1: Distribution of oxygen, nitrogen and
argon at consumer sites / By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA,2004.
PRESSURE TESTING ISO ISO 20623 2003 Petroleum and related products - Determination of the extreme-pressure and
anti-wear properties of fluids - Four ball method (European conditions) / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
PRESSURE VESSELS ISO ISO 14623 2003 Space systems - Pressure vessels and pressurized structures - Design
and operation / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
PRINTED-CIRCUIT BOARDS BSI BS 6221-21 2001 Printed wiring boards - P.21: Guide to the rework of unassembled boards /
By British Standards Institution (BSI). London: BSI, 2001.
PROCESS CONTROL IEC IEC 60488-1 2004 Higher performance protocol for the standard digital interface for
programmable instrumentation - P.1: General / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
IEC PAS 61512-3 2004 Bath control - P.3: General and site recipe models andrepresentation / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 70
IEC 61514-2 2004 Industrial process control systems - P.2: Methods of evaluating theperformance of intelligent valve positioners with pneumatic outputs / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC/PAS 62030 2004 Digital data communications for measurement and control -Fieldbus for use in industrial control systems - S.1: MODBUS ® Application protocolspecification v.1.1a - S.2: Real-time publish-Subscribe (RTPS) wire protocol specificationversion 1.0 / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
ISO ISO/TS 10303-35 2003 Industrial automation systems and integration - Product data
representation - Product data representation and exchange - P.35: Conformance testingmethodology and framework: Abstract test methods for standard data access interface (SDAI)implementations / By International Organization for Standardization (ISO). Geneva: ISO,2003.
ISO 10303-214 2003 Industrial automation systems and integration - Product datarepresentation and exchange - P.214: Application protocol: Core data for automotivemechanical design processes / By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2003.
ISO 15745-2 2003 Industrial automation systems and integration - Open systemsapplication integration framework - P.2: Reference description for ISO 11898-based controlsystems / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 15926-2 2003 Industrial automation systems and integration - Integration of life-cycle data for process plants including oil and gas production facilities - P.2: Data model / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
PROGRAMMING ISO ISO 14621-2 2003 Space systems - Electrical, electronic and electromechanical (EEE)
parts - P.2: Control programme requirements / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
PROGRAMMING LANGUAGES CSBTS GB/T 18792 2002 Information technology - Document description and processing
languages - HyperText Markup Language (HTML) / By China State Bureau of Quality andTechnical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 18793 2002 Information technology - Extensible Markup Language (XML) 1.0 /By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 61691-1-1 2004 Behavioural languages - P.1-1: VHDL language reference manual /
By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 61691-4 2004 Behaviour languages - P.4: Verilog® hardware description
languages / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 61691-5 2004 Behaviour languages - P.5: VITAL ASIC (application specific
integrated circuit) modeling specification / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 71
ISO ISO/IEC 9496 2003 CHILL - The ITU-T programing language / By International
Organization for Standardization (ISO). 4th ed. Geneva: ISO, 2003. ISO/TS 15000-1 2004 Electronic business eXtensible Markup Language
(ebXML) - P.1: Collaboration-protocol profile and agreement specification (ebCPP) / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO/TS 15000-2 2004 Electronic business eXtensible Markup Language(ebXML) - P.2: Message service specification (ebMS) / By International Organizationfor Standardization (ISO). Geneva: ISO, 2004.
ISO/TS 15000-3 2004 Electronic business eXtensible Markup Language(ebXML) - P.3: Registry information model specification (ebRIM) / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2004.
ISO/TS 15000-4 2004 Electronic business eXtensible Markup Language(ebXML) - P.4: Registry services specification (ebRS) / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
ISO/IEC TR 19755 2003 Information technology - Programming languages, theirenvironments and system software interfaces - Object finalization for programming languageCOBOL / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
PROSTHETIC DEVICES ISO ISO 7206-10 2003 Implants for surgery - Partial and total hip-joint prostheses -
P.10: Determination of resistance to static load of modular femoral heads / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
PROTECTIVE CLOTHING BSI BS EN 381-10 2002 Protective clothing for users of hand-held chainsaws - P.10: Test
method for upper body protectors / By British Standards Institution (BSI). London: BSI, 2002. BS EN 381-11 2002 Protective clothing for users of hand-held chainsaws - P.11:
Requirements for upper body protectors / By British Standards Institution (BSI). London:BSI, 2002.
BS EN 943-1 2002 Protective clothing against liquid and gaseous chemicals, includingliquid aerosols and solid particles - P.1: Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) and "non-gas-tight" (Type 2) chemical protective suits / ByBritish Standards Institution (BSI). London: BSI, 2002.
BS EN 943-2 2002 Protective clothing against liquid and gaseous chemicals, includingliquid aerosols and solid particles - P.2: Performance requirements for "gas-tight" (Type 1)chemical protective suits for emergency teams (ET) / By British Standards Institution (BSI).London: BSI, 2002.
ISO ISO 6942 2002 Protective clothing - Protection against heat and fire - Method of test:
Evaluation of materials and material assemblies when exposed to a source of radiant heat / ByInternational Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2002.
TISI Library Accession List (April-June 2005) Page 72
PROTOCOL IEC IEC/PAS 62030 2004 Digital data communications for measurement and control -
Fieldbus for use in industrial control systems - S.1: MODBUS ® Application protocolspecification v.1.1a - S.2: Real-time publish-Subscribe (RTPS) wire protocol specification /By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
ISO ISO/IEC 10021-6 2003 Information technology - Message Handling Systems (MHS):
Protocol specifications / By International Organization for Standardization (ISO). 3rd ed.Geneva: ISO, 2003.
ISO/IEC 14476-2 2003 Information technology - Enhanced communications transportprotocol: Specification of QoS management for simplex multicast transport / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
PUMPS IEC IEC 60335-2-41 2002 Household and similar electrical appliances - Safety - P.2-41: Particular
requirements for pumps / By International Electrotechnical Commission (IEC). 3rd ed.Geneva: IEC, 2002.
IEC 60609-1 2004 Hydraulic turbines, storage pumps and pump-turbines - Cavitationpitting evaluation - P.1: Evaluation in reaction turbines, storage pumps and pump-turbines /By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
ISO ISO 17559 2003 Hydraulic fluid power - Electrically controlled hydraulic pumps - Test
methods to determine performance characteristics / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
PURCHASING ISO ISO 3977-4 2002 Gas turbines - Procurement - P.4: Fuels and environment / By International
Organization for Standardization (ISO). Geneva: ISO, 2002. ISO 12289 2003 Aerospace - Rivets, solid, in corrosion-resisting steel - Procurement
specification / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
QUALITY IEC IEC 60300-3-2 2004 Dependability management - P.3-2: Application guide - Collection
of dependability data from the field / By International Electrotechnical Commission (IEC). 2nd ed.Geneva: IEC, 2004.
QUALITY ASSURANCE SYSTEMS JSA JIS Z9900 1994 Quality management and quality assurance standards - P.1: Guidelines
for selection and use / By Japanese Standards Association (JSA). Tokyo: JSA, 1994.
TISI Library Accession List (April-June 2005) Page 73
STANSA SANS 20013 2004 Uniform provisions concerning the approval of vehicles of
categories M, N and O with regard to braking / By Standards South Africa (STANSA).Pertoria: STANSA, 2004.
QUALITY CONTROL ISO ISO 10019 2005 Guidelines for the selection of quality management system consultants
and use of their services / By International Organization for Standardization (ISO). Geneva:ISO, 2005.
JSA JIS Z9900 1994 Quality management and quality assurance standards - P.1: Guidelines
for selection and use / By Japanese Standards Association (JSA). Tokyo: JSA, 1994. STANSA SANS 9998 2004 Water quality - Practices for evaluating and controlling microbiological
colony count media used in water quality tests / By Standards South Africa (STANSA).Pretoria: STANSA, 2004.
RADIATION PROTECTION IEC IEC 61582 2004 Radiation protection instrumentation - In vivo counters - Classification,
general requirements and test procedures for portable, transportable and installed equipment /By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
RADIO DISTURBANCES IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment -
Radio disturbance characteristics - Limits and methods of measurement / By InternationalElectrotechnical Commission (IEC). 4th ed. Geneva; IEC, 2003.
ISO ISO 11452-7 2003 Road vehicles - Component test methods for electrical disturbances
from narrowband radiated electromagnetic energy - P.7: Direct radio frequency (RF) powerinjection / By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO,2003.
STANSA SANS 216-1-4 2004 Radio disturbance and immunity measuring apparatus and methods
- P.1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment -Radiated disturbances / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
RADIOGRAPHIC TESTING STANSA SANS 12721 2004 Non-destructive testing - Thermal neutron radiographic testing -
Determination of beam L/D ratio / By Standards South Africa (STANSA). Pretoria:STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 74
RAILWAY ELECTRIC TRACTION EQUIPMENT IEC IEC 60310 2004 Railway applications - Traction transformers and inductors on
board rolling stock / By International Electrotechnical Commission (IEC). 3rd ed. Geneva:IEC, 2004.
RAILWAY VEHICLES CSBTS GB/T 12814 2002 Axles for railway cars - Types and basic dimensions / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
RAILWAY WAGONS CSBTS GB/T 18818 2002 Inspecting specification for railway wagon dumper and bulk cargo
unfreezing warehouse / By China State Bureau of Quality and Technical Supervision(CSBTS). Beijing: CSBTS, 2002.
RAW MATERIALS ISO ISO 17556 2003 Plastics - Determination of the ultimate aerobic biodegradability in soil
by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved /By International Organization for Standardization (ISO). Geneva: ISO, 2003.
REACTION TURBINES IEC IEC 60609-1 2004 Hydraulic turbines, storage pumps and pump-turbines - Cavitation
pitting evaluation - P.1: Evaluation in reaction turbines, storage pumps and pump-turbines / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2004.
READY-MIXED MATERIALS STANSA SANS 878 2004 Ready-mixed concrete / By Standards South Africa (STANSA). 4th ed.
Pretoria: STANSA, 2004.
RECEIVERS IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment -
Radio disturbance characteristics - Limits and methods of measurement / By InternationalElectrotechnical Commission (IEC). 4th ed. Geneva; IEC, 2003.
REFRACTORY MATERIALS ISO ISO 10059-2 2003 Dense, shaped refractory products - Determination of cold
compressive strength - P.2: Test with packing / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 10081-1 2003 Classification of dense shaped refractory products - P.1: Alumina-silica / By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 75
ISO 10081-2 2003 Classification of dense shaped refractory products - P.2: Basic productscontaining less than 7% residual carbon / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ISO 10081-3 2003 Classification of dense shaped refractory products - P.3: Basic productscontaining from 7 % to 50 % residual carbon / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
REFRIGERATORS IEC IEC 60335-2-24 2002 Household and similar electrical appliances - Safety - P.2-24: Particular
requirements for refrigerating appliances, ice-cream appliances and ice-makers / By InternationalElectrotechnical Commission (IEC). 6th ed. Geneva: IEC, 2002.
IEC 60335-2-89 2002 Household and similar electrical appliances - Safety - P.2-89:Particular requirements for commercial refrigerating appliances with an incorporated or remoterefrigerant condensing unit or compressor / By International Electrotechnical Commission(IEC). Geneva: IEC, 2002.
REINFORCED CONCRETE ISO ISO 3766 2003 Construction drawings - Simplified representation of concrete
reinforcement / By International Organization for Standardization (ISO). 3r d ed. Geneva:ISO, 2003.
REINFORCED PLASTICS ISO ISO 13003 2003 Fibre-reinforced plastics - Determination of fatigue properties under
cyclic loading conditions / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
REINFORCING MATERIALS ISO ISO 17771 2003 Plastics - Thermoset moulding compounds - Determination of the
degree of fibre wetting in SMC / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
RELAYS IEC IEC 61810-1 2003 Electromechanical elementary relays - P.1: General and safety
requirements / By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC,2003.
RELIABILITY IEC IEC/TR 62048 2002 Optical fibres - Reliability - Power law theory / By International
Electrotechnical Commission (IEC). Geneva: IEC, 2002.
TISI Library Accession List (April-June 2005) Page 76
REPIRATORY SYSTEMS ISO ISO 15859-13 2004 Space systems - Fluid characteristics, sampling and test methods -
P.13: Breathing air / By International Organization for Standardization (ISO). Geneva: ISO,2004.
REPRODUCTION MACHINES ISO ISO/IEC 19752 2004 Information technology - Method for the determination of
toner cartridge yield for monochromatic electrophotographic printers and multi-functiondevices that contain printer components / By International Organization for Standardization(ISO). Geneva: ISO, 2004.
RESISTANCE-WELDING EQUIPMENT STANSA SANS 5826 2004 Resistance welding equipment - Transformers - General specifications
applicable to all transformers / By Standards South Africa (STANSA). 2nd ed. Pretoria:STANSA, 2004.
RESISTORS IEC IEC 60062 2004 Marking codes for resistors and capacitors / By International Electrotechnical
Commission (IEC). 5th ed. Geneva: IEC, 2004.
RESONATORS IEC IEC 61019-1 2004 Surface acoustic wave (SAW) resonators - P.1: Generic
specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 61337-1 2004 Filters using waveguide type dielectric resonators - P.1: Generic
specification / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 61337-2 2004 Filters using waveguide type dielectric resonators - P.2: Guidance
for use / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 61338-1 2004 Waveguide type dielectric resonators - P.1: Generic specification /
By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
RESPIRATORS BSI BS EN 405 2002 Respiratory protective devices - Valved filtering half masks to protect
against gases or gases and particles - Requirements, testing, marking / By British StandardsInstitution (BSI). London: BSI, 2002.
RIVETS ISO ISO 12289 2003 Aerospace - Rivets, solid, in corrosion-resisting steel - Procurement
specification / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 77
ROAD VEHICLE COMPONENTS ISO ISO 11452-7 2003 Road vehicles - Component test methods for electrical disturbances
from narrowband radiated electromagnetic energy - P.7: Direct radio frequency (RF) powerinjection / By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO,2003.
ROAD VEHICLE ENGINEERING ISO ISO 5287 2003 Belt drives - Narrow V-belts for the automotive industry - Fatigue test /
By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003.
ROAD VEHICLES CSBTS GB/T 5620 2002 Road vehicles - Braking of automative vehicles and their trailers -
Vocabular / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
ISO ISO 3984 2004 Road vehicles - Rear moving barrier impact test procedure / By
International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2004. ISO 11452-7 2003 Road vehicles - Component test methods for electrical disturbances
from narrowband radiated electromagnetic energy - P.7: Direct radio frequency (RF) powerinjection / By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO,2003.
ISO/TS 12104 2003 Road vehicles - Gearshift patterns - Manual transmissions withpower-assisted gearchange and automatic transmissions with manual-gearshift mode / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 16750-2 2003 Road vehicles - Environmental conditions and testing for electricaland electronic equipment - P.2: Electrical loads / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 16750-3 2003 Road vehicles - Environmental conditions and testing for electricaland electronic equipment - P.3: Mechanical loads / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 16844-2 2004 Road vehicles - Tachograph systems - P.2: Recording unit, electricalinterface / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
STANSA SANS 10210 2004 Calculating and predicting road traffic noise / By Standards South
Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
ROCKS ISO ISO 14689-1 2003 Geotechnical investigation and testing - Identification and
classification of rock - P.1: Identification and description / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 78
ROLLING BEARINGS CSBTS GB/T 4661 2002 Rolling bearings - Cylindrical rollers / By China State Bureau of Quality
and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
ISO ISO 15312 2003 Rolling bearings - Thermal speed rating - Calculation and coefficients /
By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ROOFING TILES
SAA AS 2049 2002 Roof tiles / By Standards Australia (SAA). New South Wales: SAA, 2002.
AS 4046.0 2002 Methods of testing roof tiles - P.0: Introduction and list of methods / ByStandards Australia (SAA). New South Wales: SAA, 2002.
AS 4046.1 2002 Methods of testing roof tiles - M.1: Determination of distortion / By StandardsAustralia (SAA). New South Wales: SAA, 2002.
ROTATING ELECTRIC MACHINES IEC IEC 60034-11 2004 Rotating electrical machines - P.11: Thermal protection / By
International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004. STANSA SANS 60034-8 2003 Rotating electrical machines - P.8: Terminal markings and direction
of rotation / By Standards South Africa (STANSA). 2nd ed. - - Pretoria: STANSA, 2003. SANS 60034-26 2004 Rotating electrical machines - P.26: Effects of unbalanced voltages
on the performance of three-phase induction motors / By Standards South Africa (STANSA).Pretoria: STANSA, 2004.
ROUNDNESS MEASUREMENT ISO ISO/TS 12181-1 2003 Geometrical Product Specifications (GPS) - Roundness - P.1:
Vocabulary and parameter of roundness / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ISO/TS 12181-2 2003 Geometrical Product Specifications (GPS) - Roundness - P.2:Specification operators / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
ROVING (TEXTILE PROCESS) ISO ISO 15039 2003 Textile-glass rovings - Determination of solubility of size / By
International Organization for Standardization (ISO). Geneva: ISO, 2003.
SAFETY DEVICES BSI BS EN 353-1 2002 Personal protective equipment against falls from a height - P.1: Guided
type fall arresters including a rigid anchor line / By British Standards Institution (BSI). London:BSI, 2002.
TISI Library Accession List (April-June 2005) Page 79
BS EN 354 2002 Personal protective equipment against falls from a height - Lanyards /By British Standards Institution (BSI). London: BSI, 2002.
BS EN 355 2002 Personal protective equipment against falls from a height - Energyabsorbers / By British Standards Institution (BSI). London: BSI, 2002.
BS EN 361 2002 Personal protective equipment against falls from a height - Full bodyharnesses / By British Standards Institution (BSI). London: BSI, 2002.
SAFETY HARNESSES BSI BS EN 361 2002 Personal protective equipment against falls from a height - Full body
harnesses / By British Standards Institution (BSI). London: BSI, 2002.
SAFETY LINES BSI BS EN 353-1 2002 Personal protective equipment against falls from a height - P.1: Guided
type fall arresters including a rigid anchor line / By British Standards Institution (BSI). London:BSI, 2002.
SAFETY MEASURES BSI BS EN 1028-1 2002 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer -
P.1: Classification - General and safety requirements / By British Standards Institution (BSI).London: BSI, 2002.
BS EN 1028-2 2002 Fire-fighting pumps - Fire-fighting centrifugal pumps with primer -P.2: Verification of general and safety requirements / By British Standards Institution (BSI).London: BSI, 2002.
BS EN 12111 2002 Tunnelling machines - Road headers, continuous miners and impactrippers - Safety requirements / By British Standards Institution (BSI). London: BSI, 2002.
CSBTS GB 4706.54 2002 Safety of household and similar electrical appliances - Particular requirements for
walk-behind and hand-held lawn trimmers and lawn edge trimmers / By China State Bureau ofQuality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 8321.7 2002 Guideline for safety application of pesticides (VII) / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 60335-2-2 2002 Household and similar electrical appliances - Safety - P.2-2: Particular requirements
for vacuum cleaners and water-suction cleaning appliances / By International ElectrotechnicalCommission (IEC). 5th ed. Geneva: IEC, 2004.
IEC 60335-2-2 2002 Household and similar electrical appliances - Safety - P.2-2: Particular requirementsfor vacuum cleaners and water-suction cleaning appliances / By International ElectrotechnicalCommission (IEC). 5th ed. Geneva: IEC, 2002.
IEC 60335-2-7 2002 Household and similar electrical appliances - P.2-7: Particular requirementsfor washing machines / By International Electrotechnical Commission (IEC). 6th ed. Geneva:IEC, 2004.
IEC 60335-2-13 2002 Household and similar electrical appliances - Safety - P.2-13: Particular requirementsfor deep fat fryers, frying pans and similar appliances / By International ElectrotechnicalCommission (IEC). 5th ed. Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 80
IEC 60335-2-36 2004 Household and similar electrical appliances - Safety - P.2-36:Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements/ By International Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2004.
IEC 60825-12 2004 Safety of laser products - P.12: Safety of free space optical communicationsystems used for transmission of information / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
IEC 60825-2 2004 Safety of laser products - P.2: Safety of optical fibre communicationsystems (OFCS) / By International Electrotechnical Commission (IEC). 3rd ed. Geneva: IEC,2004.
IEC/TR 60825-14 2004 Safety of laser products - P.14: A user's guide / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 61810-1 2003 Electromechanical elementary relays - P.1: General and safetyrequirements / By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2003.
IEC 62115 2003 Electric toys - Safety / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
STANSA SANS 50081-70 2004 Safety rules for the construction and installation of lifts - Particular
applications for passenger and goods lifts - P.70: Accessibility to lifts for persons includingpersons with disability / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
SAFFRON ISO ISO/TS 3632-1 2003 Saffron (Crocus sativus L.) - P.1: Specification / By International
Organization for Standardization (ISO). Geneva: ISO, 2003.
SAG (DEFORMATION) ISO ISO 16862 2003 Paints and varnishes - Evaluation of sag resistance / By International
Organization for Standardization (ISO). Geneva: ISO, 2003.
SAMPLING METHODS ISO ISO 15859-1 2004 Space systems - Fluid characteristics, sampling and test methods -
P.1: Oxygen / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 15859-2 2004 Space systems - Fluid characteristics, sampling and test methods- P.2: Hydrogen / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 15859-3 2004 Space systems - Fluid characteristics, sampling and test methods -P.3: Nitrogen / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 15859-4 2004 Space systems - Fluid characteristics, sampling and test methods -P.4: Helium / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 15859-5 2004 Space systems - Fluid characteristics, sampling and test methods -P.5: Nitrogen tetroxide propellants / By International Organization for Standardization(ISO). Geneva: ISO, 2004.
TISI Library Accession List (April-June 2005) Page 81
ISO 15859-6 2004 Space systems - Fluid characteristics, sampling and test methods -P.6: Monomethylhydrazine propellant / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
ISO 15859-7 2004 Space systems - Fluid characteristics, sampling and test methods -P.7: Hydrazine propellant / By International Organization for Standardization (ISO).Geneva: ISO, 2004.
ISO 15859-9 2004 Space systems - Fluid characteristics, sampling and test methods- P.9: Argon / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 15859-10 2004 Space systems - Fluid characteristics, sampling and test methods -P.10: Water / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 15859-11 2004 Space systems - Fluid characteristics, sampling and test methodsP.11: Ammonia / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 15859-12 2004 Space systems - Fluid characteristics, sampling and test methods -P.12: Carbon dioxide / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
SAA AS 2862.1 1999 Copper, lead and zinc sulfide concentrates - Sampling - P.1: Sampling
procedures for determination of metal and moisture content / By Standards Australia (SAA).New South Wales: SAA, 1999.
AS 2862.2 1999 Copper, lead and zinc sulfide concentrates - Sampling - P.2:Experimental methods for checking the precision of sampling / By Standards Australia (SAA).New South Wales: SAA, 1999.
AS 2862.3 1999 Copper, lead and zinc sulfide concentrates - Sampling - P.3:Experimental methods for checking the bias of sampling / By Standards Australia (SAA).New South Wales: SAA, 1999.
SCAFFOLDS STANSA SANS 10085-1 2004 The design, erection, use and inspection of access scaffolding -
P.1: Steel access scaffolding / By Standards South Africa (STANSA). Pretoria: STANSA,2004.
SCHOOL UNIFORMS STANSA SANS 1444-1 to 1444-8 2004 Schoolwear fabrics / By Standards South Africa (STANSA). 2nd ed.
Pretoria: STANSA, 2004.P.1: Basic requirementsP.2: Blazer fabricsP.3: Polyester-and-woll fabricsP.4: Polyester-and-viscose fabricsP.5: Polyester-and-cotton fabricsP.6: Shirting and blouse fabricsP.7: Fabrics containing textured yarnsP.8: Warp-knitted fabrics
TISI Library Accession List (April-June 2005) Page 82
SCREWS (BELTS) ISO ISO 2342 2003 Slotted headless screws with shank / By International Organization for
Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
SEALING MATERIALS ISO ISO 9046 2002 Building construction - Jointing products - Determination of adhesion/cohesion
properties of sealants at constant temperature / By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2002.
SEALING RINGS ISO ISO 9631 2003 Rubber seals - Joint rings for pipelines for hot-water supply up to 110
degrees C - Specification for the material / By International Organization for Standardization(ISO). 2nd ed. Geneva: ISO, 2003.
SEALS ISO ISO 23711 2003 Elastomeric seals - Requirements for materials for pipe joint seals used
in water and drainage applications - Thermoplastic elastomers / By International Organizationfor Standardization (ISO). Geneva: ISO, 2003.
SEAMLESS PIPES BSI BS EN 10220 2002 Seamless and welded steel tubes - Dimensions and masses per unit length /
By British Standards Institution (BSI). London: BSI, 2002.
SECURITIES CSBTS GB/T 18238.2 2002 Information technology - Security techniques - Hash-functions -
P.2: Hash-functions using and n-bit block cipher / By China State Bureau of Quality andTechnical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 18238.3 2002 Information technology - Security techniques - Hash-functions -P.3: Dedicated hash-functions / By China State Bureau of Quality and Technical Supervision(CSBTS). Beijing: CSBTS, 2002.
SEDIMENTATION NUMBER JSA JIS R1619 1995 Testing method for size distribution of fine ceramic particles by liquid
photosedimentation method / By Japanese Standards Association (JSA). Tokyo: JSA, 1995.
SEMICONDUCTOR DEVICES IEC IEC 60749-23 2004 Semiconductor devices - Mechanical and climatic test methods -
P.23: High temperature operating life / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 83
IEC/PAS 62050 2004 Board level drop test method of components for handheldelectronic products / By International Electrotechnical Commission (IEC). Geneva: IEC,2004.
IEC/TR 62380 2004 Reliability data handbook - Universal model for relibility predictionof electronics components, PCBs and equipment / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
SENSORY ANALYSIS (FOOD) ISO ISO 13302 2003 Sensory analysis - Methods for assessing modifications to the flavour
of foodstuffs due to packaging / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
SET SCREWS ISO ISO 4026 2003 Hexagon socket set screws with flat point / By International Organization for
Standardization (ISO). 3rd ed. Geneva: ISO, 2003. ISO 4027 2003 Hexagon socket set screws with cone point / By International Organization for
Standardization (ISO). 3rd ed. Geneva: ISO, 2003. ISO 4028 2003 Hexagon socket set screws with dog point / By International Organization for
Standardization (ISO). 3rd ed. Geneva: ISO, 2003. STANSA SANS 1700-12-2 2004 Fasteners - P.12: Set screws - S.2: Hexagon socket set screws with
flat point / By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004. SANS 1700-12-5 2004 Fasteners - P.12: Set screws - S.5: Hexagon socket set screws with
cup point / By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
SHEET MATERIALS ISO ISO 9328-7 2004 Steel flat products for pressure purposes - Technical
delivery conditions - P.7: Stainless steels / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
STANSA SANS 50028-1 2004 Flat products made of steels for pressure purposes - P.1: General
requirements / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
SKIN-TREATMENT APPLIANCES IEC IEC 60335-2-27 2002 Household and similar electrical appliances - Safety - P.2-27: Particular
requirements for appliances for skin exposure to ultraviolet and infrared radiation / ByInternational Electrotechnical Commission (IEC). Geneva: IEC, 2004.
SLEEPERS SAA AS 1085.17 2003 Railway track material - P.17: Steel sleepers / By Standards Australia
(SAA). New South Wales: SAA, 2003.
TISI Library Accession List (April-June 2005) Page 84
SOCKETS (THREADED) ISO ISO 727-2 2002 Fittings made from unplasticized poly(vinyl chloride) (PVC-
U), chlorinated poly(vinyl chloride) (PVC-C) or acrylonitrile/butadiene/styrene (ABS) withplain sockets for pipes under pressure - P.2: Inch-based series / By International Organizationfor Standardization (ISO). Geneva: ISO, 2002.
SODIUM STANSA SANS 6050 2004 Water - Sodium content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004.
SOFTWARE TECHNIQUES STANSA SANS 18019 2004 Software and system engineering - Guidelines for the design and
preparation of user documentation for application software / By Standards South Africa(STANSA). Pretoria: STANSA, 2004.
SANS 19760 2004 Systems engineering - A guide for the application of ISO/IEC 15288(System life cycle processes) / By Standards South Africa (STANSA). Pretoria: STANSA,2004.
SOIL TESTING ISO ISO 16772 2004 Soil quality - Determination of mercury in aqua regia soil extracts with
cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.
SOILS ISO ISO 15800 2003 Soil quality - Characterization of soil with respect to human exposure /
By International Organization for Standardization (ISO). Geneva: ISO, 2003. ISO 16772 2004 Soil quality - Determination of mercury in aqua regia soil extracts with
cold-vapour atomic spectrometry or cold-vapour atomic fluorescence spectrometry / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.
SOLAR POWER IEC IEC 62124 2004 Photovoltaic (PV) stand-alone systems - Design verification / By International
Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC/TS 62257-3 2004 Recommendations for small renewable energy and hybrid systems
for rural electrification - P.3: Project development and management / By InternationalElectrotechnical Commission (IEC). Geneva: IEC, 2004.
SOLIDS CONTENT DETERMINATION STANSA SANS 5213 2004 Water - Dissolved solids content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004. SANS 6049 2004 Water - Suspended solids content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 85
SOLVENTS STANSA SANS 10268-5 2004 Welding of thermoplastics - Welding processes - P.5: Solvent
welding / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
SOUND BROADCASTING IEC CISPR 20 2002 Sound and television broadcast receivers and associated equipment -
Immunity characteristics - Limits and methods of measurement / By InternationalElectrotechnical Commission (IEC). 5th ed. Geneva: IEC., 2002.
SOUND INSULATION ISO ISO 22897 2003 Glass in building - Glazing and airborne sound insulation - Product
descriptions and determination of properties / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
SOUND INTENSITY ISO ISO 389-8 2004 Acoustics - Reference zero for the calibration of audiometric equipment
- P.8: Reference equivalent threshold sound pressure levels for pure tones and circumauralearphones / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
STANSA SANS 10210 2004 Calculating and predicting road traffic noise / By Standards South
Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
SPACE-HEATING SYSTEMS SAA AS/NZS 3500.4 2003 Plumbing and drainage - P.4: Heated water services / By Standards
Australia (SAA). New South Wales: SAA, 2003.
SPACE TECHNOLOGY ISO ISO 11104 2003 Space data and information transfer systems - Time code formats / By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003. ISO 14621-1 2003 Space systems - Electrical, electronic and electromechanical (EEE)
parts - P.1: Parts management / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 14621-2 2003 Space systems - Electrical, electronic and electromechanical (EEE)parts - P.2: Control programme requirements / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 14623 2003 Space systems - Pressure vessels and pressurized structures - Designand operation / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 15859-1 2004 Space systems - Fluid characteristics, sampling and test methods -P.1: Oxygen / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-2 2004 Space systems - Fluid characteristics, sampling and test methods -P.2: Hydrogen / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
TISI Library Accession List (April-June 2005) Page 86
ISO 15859-3 2004 Space systems - Fluid characteristics, sampling and test methods -P.3: Nitrogen / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-4 2004 Space systems - Fluid characteristics, sampling and test methods -P.4: Helium / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-5 2004 Space systems - Fluid characteristics, sampling and test methods -P.5: Nitrogen tetroxide propellants / By International Organization for Standardization (ISO).Geneva: ISO, 2004.
ISO 15859-9 2004 Space systems - Fluid characteristics, sampling and test methods -P.9: Argon / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-10 2004 Space systems - Fluid characteristics, sampling and test methods -P.10: Water / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-11 2004 Space systems - Fluid characteristics, sampling and test methods -P.11: Ammonia / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 15859-12 2004 Space systems - Fluid characteristics, sampling and test methods -P.12: Carbon dioxide / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
ISO 15859-13 2004 Space systems - Fluid characteristics, sampling and test methods -P.13: Breathing air / By International Organization for Standardization (ISO). Geneva: ISO,2004.
SPECIMEN PREPARATION CSBTS GB/T 8571 2002 Preparation of laboratory samples for compound fertilizers / By China
State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 2580-2 2003 Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and
extrusion materials - P.2: Preparation of test specimens and determination of properties / ByInternational Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003.
ISO 2897-2 2003 Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusionmaterials - P.2: Preparation of test specimens and determination of properties / ByInternational Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003.
ISO 6402-2 2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS)moulding and extrusion materials - P.2: Preparation of test specimens and determination ofproperties / By International Organization for Standardization (ISO). 2nd ed. Geneva: ISO,2003.
ISO 10366-2 2003 Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene(MABS) moulding and extrusion materials - P.2: Preparation of test specimens anddetermination of properties / By International Organization for Standardization (ISO). 2nd ed.Geneva: ISO, 2003.
STANSA SANS 6168 2004 Water - Pretreatment for metal analysis / By Standards South Africa
(STANSA). Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 87
SPECTACLES (EYEGLASSES) SAA AS/NZS 1067 2003 Sunglasses and fashion spectacles / By Standards Australia (SAA).
New South Wales: SAA, 2003.
SPECTROPHOTOMETRY CSBTS GB/T 18868 2002 Method for determination of moisture, crude protein, crude fat, crude
fibre, lysine and methinione in feeds - Near infrared reflectance spectroscop / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
SPRAYING (COATING) CSBTS GB/T 8642 2002 Thermal spraying - Determination of tensile adhesive strength / By
China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 17834 2003 Thermal spraying - Coatings for protection against corrosion and
oxidation at elevated temperatures / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
SPRINGS ISO ISO 11901-1 2003 Tools for preassing - Gas springs - P.1: General specifications / By
International Organization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
STAINLESS STEELS CSBTS GB/T 10127 2002 Ferric chloride crevice corrosion test of stainless steels / By China
State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. ISO ISO 9328-7 2004 Steel flat products for pressure purposes - Technical delivery
conditions - P.7: Stainless steels / By International Organization for Standardization (ISO).Geneva: ISO, 2004.
STAMPING (PRODUCTION PROCESS) CSBTS GB/T 13915 2002 Tolerance of angles for stampings / By China State Bureau of Quality
and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 13916 2002 Unnoted tolerance of shape and position for stampings / By China
State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
STANDARD ATMOSPHERE JSA JIS K7100 1981 Standard atmospheres conditioning and testing of plastics / By Japanese
Standards Association (JSA). Tokyo: JSA, 1981.
TISI Library Accession List (April-June 2005) Page 88
STANDARD DEVIATION CSBTS GB/T 6728 2002 Cold formed steel hollow sections for general structure - Dimensions,
shapes, weight and permissble deviations / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
STARTERS (LAMPS) CSBTS GB/T 1312 2002 Lampholders for tubular fluorescent lamps and starterholders / By
China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. IEC IEC 60927 2004 Auxiliaries for lamps - Starting devices (other than glow starters) -
Performance requirements / By International Electrotechnical Commission (IEC). 2nd ed.Geneva: IEC, 2004.
STATIC LOADING ISO ISO 7206-10 2003 Implants for surgery - Partial and total hip-joint prostheses - P.10:
Determination of resistance to static load of modular femoral heads / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2003.
STATISTICAL METHODS OF ANALYSIS CSBTS GB/T 8052 2002 Single and multi-level continuous sampling procedures and tables for
inspection by attributes / By China State Bureau of Quality and Technical Supervision(CSBTS). Beijing: CSBTS, 2002.
STATISTICS ISO ISO 20501 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) -
Weibull statistics for strength data / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
STEELS BSI BS EN 10220 2002 Seamless and welded steel tubes - Dimensions and masses per unit
length / By British Standards Institution (BSI). London: BSI, 2002. CSBTS GB/T 6728 2002 Cold formed steel hollow sections for general structure - Dimensions,
shapes, weight and permissble deviations / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
SAA AS 1085.17 2003 Railway track material - P.17: Steel sleepers / By Standards Australia
(SAA). New South Wales: SAA, 2003. STANSA
TISI Library Accession List (April-June 2005) Page 89
SANS 5768 2004 Preparation of steel substrates before the application of paints andrelated products - Test for the assessment of cleanliness of blast-cleaned steel surfaces -Photo-electric reflectance measurement / By Standards South Africa (STANSA). 2nd ed.Pretoria: STANSA, 2004.
SANS 5772 2004 Preparation of steel substrates before the application of paints andrelated products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile ofblast-cleaned surfaces determined by a micrometer profile gauge / By Standards South Africa(STANSA). 2nd ed. Pretoria: STANSA, 2004.
SANS 5775 2004 Preparation of steel substrates before the application of paints andrelated products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile ofblast- cleaned surfaces determined by metallographic section / By Standards South Africa(STANSA). 2nd ed. Pretoria: STANSA, 2004.
SANS 10085-1 2004 The design, erection, use and inspection of access scaffolding - P.1:Steel access scaffolding / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
STIFFNESS ISO ISO 10468 2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination
of the long-term specific ring creep stiffness under wet conditions and calculation of the wetcreep factor / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 14828 2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determinationof the long-term specific ring relaxation stiffness under wet conditions and calculation of thewet relaxation factor / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
STORAGE ISO ISO 18929 2003 Imaging materials - Wet-procesed silver-gelatin type black-and-white
photographic reflection prints - Specifications for dark storage / By International Organizationfor Standardization (ISO). Geneva: ISO, 2003.
STRAIGHTNESS MEASUREMENT ISO ISO/TS 12780-1 2003 Geometrical Product Specifications (GPS) - Straightness - P.1:
Vocabulary and parameters of straightness / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
ISO/TS 12780-2 2003 Geometrical Product Specifications (GPS) - Straightness - P.2:Specification operators / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
STRAPS BSI BS EN 846-4 2002 Methods of test for ancillary components for masonry - P.4:
Determination of load capacity and load-deflection characteristics of straps / By BritishStandards Institution (BSI). London: BSI, 2002.
TISI Library Accession List (April-June 2005) Page 90
STRUCTURAL TIMBER ISO ISO 16670 2003 Timber structures - Joints made with mechanical fasteners - Quasi-static
reversed-cyclic test method / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 22156 2004 Bamboo - Structural design / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
SULPHUR DIOXIDE ISO ISO 10498 2004 Ambient air - Determination of sulfur dioxide - Ultraviolet fluorescence
method / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
SURFACE PROPERTIES BSI BS EN 311 2002 Wood-based panels - Surface soundness - Test method / By British
Standards Institution (BSI). London: BSI, 2002.
SURFACE TREATMENT STANSA SANS 5768 2004 Preparation of steel substrates before the application of paints and
related products - Test for the assessment of cleanliness of blast-cleaned steel surfaces -Photo-electric reflectance measurement / By Standards South Africa (STANSA). 2nd ed.Pretoria: STANSA, 2004.
SANS 5772 2004 Preparation of steel substrates before the application of paints andrelated products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile ofblast-cleaned surfaces determined by a micrometer profile gauge / By Standards South Africa(STANSA). 2nd ed. Pretoria: STANSA, 2004.
SANS 5775 2004 Preparation of steel substrates before the application of paints andrelated products - Surface roughness characteristics of blast-cleaned steel surfaces - Profile ofblast- cleaned surfaces determined by metallographic section / By Standards South Africa(STANSA). 2nd ed. Pretoria: STANSA, 2004.
SURGE PROTECTION CSBTS GB/T 18802.1 2002 Surge protective devices connected to low-voltage power
distribution systems - P.1: Performance requirements and testing methods / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 61643-22 2004 Low-voltage surge protective devices - P.22: Surge protective
devices connected to telecommunications and signalling networks - Selection and applicationprinciples / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
SWITCHGEAR IEC IEC 60296 2003 Fluids for electrotechnical applications - Unused mineral insulating oils
for transformers and switchgear / By International Electrotechnical Commission (IEC). 3rd ed.Geneva: IEC, 2003.
TISI Library Accession List (April-June 2005) Page 91
IEC/TR 62271-301 2004 High-voltage switchgear and controlgear - P.301: Dimensionalstandardisation of terminals / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
STANSA SANS 60439-1 2004 Low-voltage switchgear and controlgear assemblies P.1: Type-
tested and partially type-tested assemblies / By Standards South Africa (STANSA). 3rd ed.Pretoria: STANSA, 2004.
TACHOGRAPHS ISO ISO 16844-2 2004 Road vehicles - Tachograph systems - P.2: Recording unit, electrical
interface / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
TEA CSBTS GB 18862 2002 Product of designation of origin or geographical indication - Hangzhou
white chrysanthenum / By China State Bureau of Quality and Technical Supervision (CSBTS).Beijing: CSBTS, 2002.
TECHNICAL DOCUMENTS IEC IEC 82045-2 2004 Document management - P.2: Metadata elements and information
reference model / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. ISO ISO/IEC Guide 74 2004 Graphical symbols - Technical guidelines for the consideration
of consumers' needs / By International Organization for Standardization (ISO). Geneva: ISO,2004.
TELEPHONE NETWORKS ISO ISO/IEC 20113 2004 Information technology - Telecommunications and information
exchange between systems - Private Intergrated Service Network - Specification, functionalmodel and information flows - Make call request supplementary service / By InternationalOrganization for Standardization (ISO). Geneva: ISO, 2004.
ISO/IEC 20114 2004 Information technology - Telecommunications and informationexchange between systems - Private Intergrated Services Network (PISN) - Inter-exchangesignalling protocol - Make call request supplementary service / By International Organizationfor Standardization (ISO). Geneva: ISO, 2004.
ISO/IEC 20115 2004 Information technology - Telecommunications and informationexchange between systems - Private Intergrated Services Network - Use of QSIG for MessageCentre Access (MCA) profile standard / By International Organization for Standardization(ISO). Geneva: ISO, 2004.
ISO/IEC 20116 2004 Information technology - Telecommunications and informationexchange between systems - Private Intergrated Services Network - Specification, functionalmodel and information flows - Message centre monitoring and mailbox identificationsupplementary services / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
TISI Library Accession List (April-June 2005) Page 92
ISO/IEC 20117 2004 Information technology - Telecommunications and informationexchange between systems - Private Intergrated Services Network - Interexchange signallingprotocol - Message centre monitoring and mailbox identification supplementary services / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2004.
TELEVISION BROADCASTING IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment -
Radio disturbance characteristics - Limits and methods of measurement / By InternationalElectrotechnical Commission (IEC). 4th ed. Geneva; IEC, 2003.
TELEVISION RECEIVERS IEC CISPR 13 2001 Sound and television broadcast receivers and associated equipment -
Radio disturbance characteristics - Limits and methods of measurement / By InternationalElectrotechnical Commission (IEC). 4th ed. Geneva; IEC, 2003.
CISPR 20 2002 Sound and television broadcast receivers and associated equipment -Immunity characteristics - Limits and methods of measurement / By InternationalElectrotechnical Commission (IEC). 5th ed. Geneva: IEC., 2002.
TEMPERATURE CSBTS GB/T 2423.22 2002 Environmental testing for electric and electronic products - P.2: Test
methods Test N: Change of temperature / By China State Bureau of Quality and TechnicalSupervision (CSBTS). Beijing: CSBTS, 2002.
TENSILE TESTING ISO ISO 9018 2003 Destructive tests on welds in metallic materials - Tensile test on
cruciform and lapped joints / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
STANSA SANS 4136 2004 Destructive tests on welds in metallic materials - Transverse tensile test
/ By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
TERMINAL BLOCKS BSI BS EN 60947-7-2 2002 Low-voltage switchgear and controlgear - P.7-2: Ancillary
equipment - Protective conductor terminal blocks for copper conductors / By British StandardsInstitution (BSI). London: BSI, 2002.
TERMINOLOGY CSBTS GB/T 7391 2002 Terminology of oceangraphic research ships / By China State Bureau
of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 8843 2002 Terminology of working ship / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
TISI Library Accession List (April-June 2005) Page 93
ISO ISO 7132 2003 Earth-moving machinery - Dumpers - terminology and commercial
specifications / By International Organization for Standardization (ISO). 3rd ed. Geneva:ISO, 2003.
ISO 8130-14 2004 Coating powders - P.14: Terminolog / By International Organizationfor Standardization (ISO). Geneva: ISO, 2004.
ISO 18104 2003 Health informatics - Integration of a reference terminology model fornursing / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
STANSA SANS 704 2004 Terminology work - Principles and methods / By Standards South
Africa (STANSA). Pretoria: STANSA, 2004.
TEST SPECIMENS ISO ISO 293 2004 Plastics - Compression moulding of test specimens of thermoplastic
materials / By International Organization for Standardization (ISO). 3rd ed. - - Geneva: ISO,2004.
TESTING BSI BS EN 381-10 2002 Protective clothing for users of hand-held chainsaws - P.10: Test
method for upper body protectors / By British Standards Institution (BSI). London: BSI, 2002. BS EN 391 2002 Glued laminated timber - Delamination test of glue lines / By British
Standards Institution (BSI). London: BSI, 2002. BS EN 480-13 2002 Admixtures for concrete, motar and grout - Test methods - P.13:
Reference masonry mortar for testing mortar admixtures / By British Standards Institution(BSI). London: BSI, 2002.
CSBTS GB/T 18802.1 2002 Surge protective devices connected to low-voltage power
distribution systems - P.1: Performance requirements and testing methods / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 18836 2002 Ducted air-conditioning (heat pump) units / By China State Bureau ofQuality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 60512-25-5 2004 Connectors for electronic equipment - Tests and measurements -
P.25-5: Test 25e - Return loss / By International Electrotechnical Commission (IEC). Geneva:IEC, 2004.
IEC 60896-21 2004 Stationary lead-acid batteries - P.21: Valve regulated types -Methods of test / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 61000-4-6 2003 Electromagnetic compatibility (EMC) - P.4-6: Testing andmeasurement techniques - Immunity to conducted disturbances, induced by radio-frequencyfields / By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004.
IEC 61000-4-25 2001 Electromagnetic compatibility (EMC) - P.4-25: Testing andmeasurement techniques - HEMP immunity test methods for equipment and systems / ByInternational Electrotechnical Commission (IEC). Geneva; IEC, 2001.
TISI Library Accession List (April-June 2005) Page 94
IEC 61006 2004 Electrical insulating materials - Methods of test for the determinationof the glass transition temperature / By International Electrotechnical Commission (IEC).2nd ed. Geneva: IEC, 2004.
IEC 61086-2 2004 Coatings for loaded printed wire boards (conformal coatings) -P.2: Methods of test / By International Electrotechnical Commission (IEC). 2nd ed.Geneva: IEC, 2004.
IEC 61300-1 2003 Fibre optic interconnecting devices and passive components - Basictest and measurement procedures - P.1: General and guidance / By InternationalElectrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2003.
IEC 61300-2-44 2004 Fibre optic interconnecting devices and passive components -Basic test and measurement procedures - P.2-44: Tests - Flexing of the strain relief of fibreoptic devices / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004.
IEC 61800-3 2004 Adjustable speed electrical power drive systems - P.3: EMCrequirements and specific test methods / By International Electrotechnical Commission (IEC).2nd ed. Geneva: IEC, 2004.
IEC 62011-2 2004 Insutating materials - Industrial, rigid, moulded, laminated tubes androds of rectangulr and hexagonal cross-section, based on thermosetting resins for electricalpurposes - P.2: Methods of test / By International Electrotechnical Commission (IEC).Geneva: IEC, 2004.
IEC 62150-2 2004 Fibre optic active components and devices - Test and measurementprocedures - P.2: ATM-PON transceivers / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
ISO ISO 75-1 2004 Plastics - Determination of temperature of deflection under load - P.1:
General test method / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2004.
ISO 75-2 2004 Plastics - Determination of temperature of deflection under load - P.2:Plastics and ebonite / By International Organization for Standardization (ISO). 2nd ed. - -Geneva: ISO, 2004.
ISO 75-3 2004 Plastics - Determination of temperature of deflection under load - P.3:High-strength thermosetting laminates and long-fibre-reinforced plastics / By InternationalOrganization for Standardization (ISO). 2nd ed. - - Geneva: ISO, 2004.
ISO 4309 2004 Cranes - Wire ropes - Care, maintenance, installation, examination anddiscard / By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2004.
ISO 6182-11 2003 Fire protection - Automatic sprinkler systems - P.11: Requirementsand test methods for pipe hangers / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 8483 2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Testmethods to prove the design of bolted flange joints / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 13695 2004 Optics and photonics - Lasers and laser-related equipment - Testmethods for the spectral characteristics of lasers / By International Organization forStandardization (ISO). Geneva: ISO, 2004.
ISO 15859-1 2004 Space systems - Fluid characteristics, sampling and test methods -P.1: Oxygen / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
TISI Library Accession List (April-June 2005) Page 95
ISO 15859-2 2004 Space systems - Fluid characteristics, sampling and test methods -P.2: Hydrogen / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-3 2004 Space systems - Fluid characteristics, sampling and test methods -P.3: Nitrogen / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-4 2004 Space systems - Fluid characteristics, sampling and test methods -P.4: Helium / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-5 2004 Space systems - Fluid characteristics, sampling and test methods -P.5: Nitrogen tetroxide propellants / By International Organization for Standardization (ISO).Geneva: ISO, 2004.
ISO 15859-6 2004 Space systems - Fluid characteristics, sampling and test methods -P.6: Monomethylhydrazine propellant / By International Organization for Standardization(ISO). Geneva: ISO, 2004.
ISO 15859-7 2004 Space systems - Fluid characteristics, sampling and test methods -P.7: Hydrazine propellant / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
ISO 15859-9 2004 Space systems - Fluid characteristics, sampling and test methods -P.9: Argon / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-10 2004 Space systems - Fluid characteristics, sampling and test methods -P.10: Water / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-11 2004 Space systems - Fluid characteristics, sampling and test methods -P.11: Ammonia / By International Organization for Standardization (ISO). Geneva: ISO, 2004.
ISO 15859-12 2004 Space systems - Fluid characteristics, sampling and test methods -P.12: Carbon dioxide / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 15859-13 2004 Space systems - Fluid characteristics, sampling and test methods -P.13: Breathing air / By International Organization for Standardization (ISO). Geneva: ISO,2004.
ISO 17101 2004 Agricultural machinery - Rotary and flail mowers - Thrown-object testand acceptance criteria / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
ISO 17708 2003 Footwear - Test methods for whole shoe - Upper sole adhesion / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
JSA JIS K7100 1981 Standard atmospheres conditioning and testing of plastics / By Japanese
Standards Association (JSA). Tokyo: JSA, 1981. SAA AS/NZS 4020 2002 Testing of products for use in contact with drinking water / By
Standards Australia (SAA). 4th ed. New South Wales: SAA, 2002.
TESTING CONDITIONS BSI BS EN 60086-2 2001 Primary batteries - P.2: Physical and electrical specifications / By
British Standards Institution (BSI). London: BSI, 2001. IEC IEC 62052-11 2003 Electricity metering equipment (AC) - General requirements, tests
and test conditions - P.11: Metering equipment / By International Electrotechnical Commission(IEC). Geneva: IEC, 2003.
TISI Library Accession List (April-June 2005) Page 96
TEXTILE FLOOR COVERINGS IEC IEC 61340-4-5 2004 Electrostatics - P.4-5: Standard test methods for specific
applications - Methods for characterizing the electrostatic protection of footwear andflooting in combination with a person / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
TEXTILE GLASS ISO ISO 15039 2003 Textile-glass rovings - Determination of solubility of size /
By International Organization for Standardization (ISO). Geneva: ISO, 2003.
TEXTILE PRODUCTS STANSA SANS 82 2004 Width of a textile fabric in a piece or roll / By Standards
South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2004. SANS 5102 2004 Water resistance of textile fabrics: Short period cone test/
By Standards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2004.
TEXTILE TECHNOLOGY CSBTS GB/T 18863 2002 No-iron textiles / By China State Bureau of Quality and Technical
Supervision (CSBTS). Beijing: CSBTS, 2002.
TEXTILES CSBTS GB/T 7568.4 2002 Textiles - Tests for colour fastness - Specification for
polyester adjacent fabric / By China State Bureau of Quality and Technical Supervision(CSBTS). Beijing: CSBTS, 2002.
GB/T 7573 2002 Textiles - Determination of pH of the aqueous extract / By China StateBureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 18885 2002 Technical specification for ecological textiles / By China State Bureauof Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 18886 2002 Textiles - Tests for fastness - Colour fastness to saliva / ByChina State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
ISO ISO 15039 2003 Textile-glass rovings - Determination of solubility of size /
By International Organization for Standardization (ISO). Geneva: ISO, 2003. ISO/TR 16323 2003 Textiles - Three-dimensional measuring apparatus for fabric
appearance / By International Organization for Standardization (ISO). Geneva: ISO, 2003. STANSA SANS 79 2004 Textiles - Mass per unit area of conditioned fabrics / By Standards South
Africa (STANSA). 4th ed. Pretoria: STANSA, 2004. SANS 1010 2004 Bunting / By Standards South Africa (STANSA). 3rd ed. Pretoria:
STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 97
THERMAL PROTECTION IEC IEC 60034-11 2004 Rotating electrical machines - P.11: Thermal protection /
By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004. IEC 60730-2-2 2001 Automatic electrical controls for household and similar use - P.2-2:
Particular requirements for thermal motor protectors / By International ElectrotechnicalCommission (IEC). 2nd ed. Geneva: IEC, 2001.
THERMOPLASTIC POLYMERS ISO ISO 293 2004 Plastics - Compression moulding of test specimens of thermoplastic materials / By
International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2004. ISO 10471 2003 Glass-reinforced thermosetting plastics - (GRP) pipes - Determination of the
long-term ultimate bending strain and the long-term ultimate relative ring deflection under wet conditons/ By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 14828 2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determinationof the long-term specific ring relaxation stiffness under wet conditions and calculation of thewet relaxation factor / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
STANSA SANS 1671-4 2004 Welding of thermoplastics - Machines and equipment - P.4: Hot-gas
extrusion welding / By Standards South Africa (STANSA). Pretoria: STANSA, 2004. SANS 10268-4 2004 Welding of thermoplastics - Welding processes - P.4: Hot-gas extrusion
welding / By Standards South Africa (STANSA). Pretoria: STANSA, 2004. SANS 10268-5 2004 Welding of thermoplastics - Welding processes - P.5: Solvent welding /
By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
THERMOSETTING POLYMERS ISO ISO 8483 2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test
methods to prove the design of bolted flange joints / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO 10468 2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination ofthe long-term specific ring creep stiffness under wet conditions and calculation of the wet creepfactor / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 15306 2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination ofthe resistance to cyclic internal pressure / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
TIN CSBTS GB/T 12599 2002 Metallic coatings - Electroplated coatings of tin - Specification and test
methods / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
ISO ISO/TS 9941 2003 Milk and canned evaporated milk - Determination of tin content -
Spectrometric method / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
TISI Library Accession List (April-June 2005) Page 98
TOLERANCES OF POSITION CSBTS GB/T 307.4 2002 Rolling bearings - Thrust bearings - Tolerances / By China State
Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 308 2002 Rolling bearings - Steel balls / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 13915 2002 Tolerance of angles for stampings / By China State Bureau of Quality and
Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 13916 2002 Unnoted tolerance of shape and position for stampings / By China
State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
TORSION STRENGTH STANSA SANS 6124 2004 Wooden doors - Determination of resistance to torsion / By Standards
South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
TORSION TESTING IEC IEC 61300-2-5 2002 Fibre optic interconnecting devices and passive components - Basic test
and measurement procedures - P.2-5: Tests - Torsion/Twist / By International ElectrotechnicalCommission (IEC). 2nd ed. Geneva: IEC, 2002.
TOWED ROAD VEHICLES ISO ISO 3732 2003 Road vehicles - Connectors for the electrical connection of towing and
towed vehicles - 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominalsupply voltage / By International Organization for Standardization (ISO). 4t h ed. Geneva:ISO, 2003.
ISO 4091 2003 Road vehicles - Connectors for the electrical connection of towing andtowed vehicles - Definitions, tests and requirements / By International Organization forStandardization (ISO). 3rd ed. Geneva: ISO, 2003.
TOWER CRANES ISO ISO 4306-3 2003 Cranes - Vocabulary - P.3: Tower cranes / By International
Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2003.
TOXICITY IEC IEC/TS 60695-7-3 2004 Fire hazard testing - P.7-3: Toxicity of fire effluent - Use and
interpretation of test results / By International Electrotechnical Commission (IEC). 2nd ed.Geneva: IEC, 2004.
TOYS IEC IEC 62115 2003 Electric toys - Safet / By International Electrotechnical Commission
(IEC). Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 99
TRAILERS ISO ISO 11555-1 2003 Road vehicles - Stabilizing devices for caravans and light trailers -
P.1: Integrated stabilizers / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
TRANSCEIVERS IEC IEC 62150-2 2004 Fibre optic active components and devices - Test and measurement
procedures - P.2: ATM-PON transceivers / By International Electrotechnical Commission(IEC). Geneva: IEC, 2004.
TRANSFORMERS IEC IEC 60214-2 2004 Tap-changers - P.2: Application guide / By International
Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 60296 2003 Fluids for electrotechnical applications - Unused mineral insulating oils for
transformers and switchgear / By International Electrotechnical Commission (IEC). 3rd ed.Geneva: IEC, 2003.
STANSA SANS 5826 2004 Resistance welding equipment - Transformers - General specifications
applicable to all transformers / By Standards South Africa (STANSA). 2nd ed. Pretoria:STANSA, 2004.
TRANSMITTANCE ISO ISO 20508 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) -
Determination of light transmittance of ceramic films with transparent substrate / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
TRANSPORTATION CSBTS GB/T 17703.1 2002 International movement of goods governmental regulatory message -
P.1: United Nations standard - International movement of goods governmental regulatorymessage / By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing:CSBTS, 2002.
GB/T 18818 2002 Inspecting specification for railway wagon dumper and bulk cargounfreezing warehouse / By China State Bureau of Quality and Technical Supervision(CSBTS). Beijing: CSBTS, 2002.
ISO ISO/PAS 17684 2003 Transport information and control systems - In-vehicule navigation
systems - ITS message set translator to ASN.1 format definitions / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
TUBES (PACKAGES) - BLOOD ISO ISO 3826-1 2003 Plastics collapsible containers for human blood and blood components
- P.1: Conventional containers / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 100
TUBING (MEDICAL) ISO ISO/TS 16628 2003 Tracheobronchial tubes - Recommendations for size designation and
labelling / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
UNPLASTICIZED POLYVINYL CHLORIDE STANSA SANS 966-1 2004 Components of pressure pipe systems - P.1: Unplasticized poly (vinyl
chloride) (PVC-U) pressure pipe systems / By Standards South Africa (STANSA). 3rd ed.Pretoria: STANSA, 2004.
VACUUM CLEANERS IEC IEC 60335-2-2 2002 Household and similar electrical appliances - Safety - P.2-2: Particular
requirements for vacuum cleaners and water-suction cleaning appliances / By InternationalElectrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2004.
VALVES IEC IEC 61514-2 2004 Industrial process control systems - P.2: Methods of evaluating the
performance of intelligent valve positioners with pneumatic outputs / By International ElectrotechnicalCommission (IEC). Geneva: IEC, 2004.
ISO ISO 17082 2004 Pneumatic fluid power - Valves - Data to be included in supplier literature /
By International Organization for Standardization (ISO). Geneva: ISO, 2004.
VARNISHES ISO ISO 21227-1 2003 Paints and varnishes - Evaluation of defects on coated surfaces using
optical imaging - P.1: General guidance / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
VEHICLE COMPONENTS STANSA SANS 20013 2004 Uniform provisions concerning the approval of vehicles of categories
M, N and O with regard to braking / By Standards South Africa (STANSA). Pertoria:STANSA, 2004.
VENTILATORS ISO ISO 8835-5 2004 Inhalational anaesthesia systems - P.5: Anaesthetic ventilators / By
International Organization for Standardization (ISO). Geneva: ISO, 2004.
VIBRATION ISO ISO 14963 2003 Mechanical vibration and shock - Guidelines for dynamic tests and
investigations on bridges and viaducts / By International Organization for Standardization(ISO). Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 101
VIBRATION TESTING CSBTS GB/T 7094 2002 Vibration (sinusoidal) test method for electrical installations in ships /
By China State Bureau of Quality and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
VIDEO SIGNALS IEC IEC 62375 2004 Video systems (625/50 progressive) - Video and accompanied data using the
vertical blanking interval - Analogue interface / By International Electrotechnical Commission(IEC). Genva: IEC, 2004.
VISUAL INSPECTION (TESTING) ISO ISO 17637 2003 Non-destructive testing of welds - Visual testing of fusion-welded joints /
By International Organization for Standardization (ISO). Geneva: ISO, 2003.
VITAMIN B complex CSBTS GB/T 14700 2002 Determination of vitamin B1 in feeds / By China State Bureau of Quality
and Technical Supervision (CSBTS). Beijing: CSBTS, 2002. GB/T 14701 2002 Determination of vitamin B2 in feeds / By China State Bureau of Quality
and Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
VOCABULARY CSBTS GB/T 2900.58 2002 Electrotechnical terminology - Generation, transmission and distribution
of electricity - Power system planning and management / By China State Bureau of Qualityand Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
GB/T 3944 2002 Spherical plain bearings - Vocabulary / By China State Bureau of Qualityand Technical Supervision (CSBTS). Beijing: CSBTS, 2002.
IEC IEC 60050-141 2004 International elctrotechnical vocabulary - P.141: Polyphase systems
and circuits / By International Electrotechnical Commission (IEC). Geneva: IEC, 2004. IEC 60050-826 2004 International electrotechnical vocabulary - P.826: Electrical
installations / By International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004. IEC/TR 60788 2004 Medical electrical equipment - Glossary of defined terms / By
International Electrotechnical Commission (IEC). 2nd ed. Geneva: IEC, 2004. IEC/TR 62051-1 2004 Electricity metering - Data exchange for meter reading, tariff and
load control - Glossary of terms - P.1: Terms related to data exchange with metering equipmentusing DLMS/COSEM / By International Electrotechnical Commission (IEC). Geneva: IEC,2004.
ISO ISO 4306-3 2003 Cranes - Vocabulary - P.3: Tower cranes / By International Organization
for Standardization (ISO). 3rd ed. Geneva: ISO, 2003. ISO 5391 2003 Pneumatic tools and machines - Vocabulary / By International Organization
for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
TISI Library Accession List (April-June 2005) Page 102
ISO 8499 2003 Knitted fabrics - Description of defects - Vocabular / By InternationalOrganization for Standardization (ISO). 2nd ed. Geneva: ISO, 2003.
ISO/TS 12180-1 2003 Geometrical Product Specifications (GPS) - CylindricityP.1: Vocabulary an parameters of cylindrical form / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TS 12181-1 2003 Geometrical Product Specifications (GPS) - Roundness -P.1: Vocabulary and parameter of roundness / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TS 12780-1 2003 Geometrical Product Specifications (GPS) - Straightness -P.1: Vocabulary and parameters of straightness / By International Organization forStandardization (ISO). Geneva: ISO, 2003.
ISO/TS 12781-1 2003 Geometrical Product Specifications (GPS) - FlatnessP.1: Vocabulary and parameters of flatness / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 20507 2003 Fine ceramics (advanced ceramics, advanced technical ceramics) -Vocabulary / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
STANSA SANS 857-1 2004 Welding and allied processes - Vocabulary - P.1: Metal welding
processes / By Standards South Africa (STANSA). Pretoria: STANSA, 2004. SANS 10044-1 2004 Welding - P.1: Glossary of terms / By Standards South Africa
(STANSA). 3rd ed. Pretoria: STANSA, 2004.
VOLUME MEASUREMENT ISO ISO 15169 2003 Petroleum and liquid petroleum products - Determination of volume,
density and mass of the hydrocarbon content of vertical cylindrical tanks by hybrid tankmeasurement systems / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
VULCANISED RUBBER ISO ISO 23794 2003 Rubber, vulcanized or thermoplastic - Abrasion testing - Guidance /
By International Organization for Standardization (ISO). Geneva: ISO, 2003.
WASHERS STANSA SANS 1700-16-9 2004 Fasteners - P.16: Washers - S.9: Plain washers, chamfered,
hardened, and tempered for high-strength structural bolting / By Standards South Africa(STANSA). Pretoria: STANSA, 2004.
WASHING MACHINES IEC IEC 60335-2-7 2002 Household and similar electrical appliances - P.2-7: Particular
requirements for washing machines / By International Electrotechnical Commission (IEC).6th ed. Geneva: IEC, 2004.
TISI Library Accession List (April-June 2005) Page 103
WATCH-GLASSES ISO ISO 14368-3 2003 Mineral and sapphire watch-glasses - P.3: Quanlitative criteria and
test methods / By International Organization for Standardization (ISO). Geneva: ISO, 2003.
WATCHES CSBTS GB/T 18828 2002 Diver's watches / By China State Bureau of Quality and Technical
Supervision (CSBTS). Beijing: CSBTS, 2002.
WATER ISO ISO 15859-10 2004 Space systems - Fluid characteristics, sampling and test methods -
P.10: Water / By International Organization for Standardization (ISO). Geneva: ISO, 2004. ISO 17381 2003 Water quality - Selection and application of ready-to-use test kit
methods in water analysis / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
ISO 17994 2004 Water quality - Criteria for establishing equivalence betweenmicrobiological methods / By International Organization for Standardization (ISO). Geneva:ISO, 2004.
STANSA SANS 5203 2004 Water - Copper content / By Standards South Africa (STANSA). 3rd ed.
Pretoria: STANSA, 2004. SANS 5207 2004 Water - Iron content / By Standards South Africa (STANSA). 3rd ed.
Pretoria: STANSA, 2004. SANS 5208 2004 Water - Lead content / By Standards South Africa (STANSA). 3rd ed.
Pretoria: STANSA, 2004. SANS 5210 2004 Water - Nitrate and nitrite content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004. SANS 5213 2004 Water - Dissolved solids content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004. SANS 6049 2004 Water - Suspended solids content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004. SANS 6050 2004 Water - Sodium content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004. SANS 6054 2004 Water - Chromium content / By Standards South Africa (STANSA).
2nd ed. Pretoria: STANSA, 2004. SANS 6168 2004 Water - Pretreatment for metal analysis / By Standards South Africa
(STANSA). Pretoria: STANSA, 2004. SANS 6171 2004 Water - Nickel content / By Standards South Africa (STANSA).
Pretoria: STANSA, 2004.
WATER ABSORPTION STANSA SANS 6012 2004 Thickness swelling and water absorption of fibreboards on immersion
in water / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 104
WATER HEATERS IEC IEC 60335-2-21 2002 Household and similar electrical appliances - P.2-21: Particular
requirements for storages water heaters / By International Electrotechnical Commission (IEC).5th ed. Geneva: IEC, 2004.
WATER - QUALITY ISO ISO 17994 2004 Water quality - Criteria for establishing equivalence
between microbiological methods / By International Organization for Standardization (ISO).Geneva: ISO, 2004.
WATER - QUALITY CONTROL STANSA SANS 13843 2004 Water quality - Guidance on validation of microbiological methods /
By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
WATER-RESISTANCE TESTS STANSA SANS 5102 2004 Water resistance of textile fabrics: Short period cone test / By
Standards South Africa (STANSA). 3rd ed. Pretoria: STANSA, 2004.
WATER-SUCTION CLEANING EQUIPMENT IEC IEC 60335-2-2 2002 Household and similar electrical appliances – Safety
P.2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances / ByInternational Electrotechnical Commission (IEC). 5th ed. Geneva: IEC, 2004.
WATER SUPPLY STANSA SANS 1808-18 2004 Water supply and distribution system components - P.18: PVC-U
gate valves / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
WATER SUPPLY AND WASTE SYSTEMS (BUILDINGS) ISO ISO 7671 2003 Plastics piping systems for soil and waste discharge (low and high
temperature) inside buildings - Polypropylene (PP) / By International Organization forStandardization (ISO). 2nd ed. Geneva: ISO, 2003.
SAA AS/NZS 3500.2 2003 Plumbing and drainage - P.2: Sanitary plumbing and drainage / By
Standards Australia (SAA). New South Wales: SAA, 2003. AS/NZS 3500.5 2000 National plumbing and drainage - P.5: Domestic installations / By
Standards Australia (SAA). New South Wales: SAA, 2000.
WATER TESTING ISO ISO 17381 2003 Water quality - Selection and application of ready-to-use test kit
methods in water analysis / By International Organization for Standardization (ISO). Geneva:ISO, 2003.
TISI Library Accession List (April-June 2005) Page 105
STANSA SANS 13843 2004 Water quality - Guidance on validation of microbiological methods /
By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
WEATHERING STANSA SANS 6182 2004 Wooden doors - Class 1 - Determination of resistance to weathering /
By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
WELDED JOINTS ISO ISO 9018 2003 Destructive tests on welds in metallic materials - Tensile test
on cruciform and lapped joints / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
ISO 17637 2003 Non-destructive testing of welds - Visual testing of fusion-welded joints /By International Organization for Standardization (ISO). Geneva: ISO, 2003.
ISO 17638 2003 Non-destructive testing of welds - Magnetic particle testing / ByInternational Organization for Standardization (ISO). Geneva: ISO, 2003.
STANSA SANS 4136 2004 Destructive tests on welds in metallic materials - Transverse tensile test
/ By Standards South Africa (STANSA). 2nd ed. Pretoria: STANSA, 2004.
WELDING ISO ISO/TR 22824 2003 Welding consumables - Predicted and measured FN in specifications
- A position statement of the experts of IIW Commission IX / By International Organizationfor Standardization (ISO). Geneva: ISO, 2003.
STANSA SANS 857-1 2004 Welding and allied processes - Vocabulary - P.1: Metal welding
processes / By Standards South Africa (STANSA). Pretoria: STANSA, 2004. SANS 1671-4 2004 Welding of thermoplastics - Machines and equipment - P.4: Hot-gas
extrusion welding / By Standards South Africa (STANSA). Pretoria: STANSA, 2004. SANS 6520-2 2004 Welding and allied processes - Classification of geometric
imperfections in metallic materials - P.2: Welding with pressure / By Standards South Africa(STANSA). Pretoria: STANSA, 2004.
SANS 10044-1 2004 Welding - P.1: Glossary of terms / By Standards SouthAfrica (STANSA). 3rd ed. Pretoria: STANSA, 2004.
SANS 10268-5 2004 Welding of thermoplastics - Welding processes - P.5: Solventwelding / By Standards South Africa (STANSA). Pretoria: STANSA, 2004.
WELDING PROCESSES STANSA SANS 6520-2 2004 Welding and allied processes - Classification of geometric
imperfections in metallic materials - P.2: Welding with pressure / By Standards South Africa(STANSA). Pretoria: STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 106
WELDING WITH PRESSURE STANSA SANS 6520-2 2004 Welding and allied processes - Classification of geometric
imperfections in metallic materials - P.2: Welding with pressure / By Standards South Africa(STANSA). Pretoria: STANSA, 2004.
WINCHES SAA AS 1418.1 2002 Cranes, hoists and winches - P.1: General requirements / By Standards
Australia (SAA). New South Wales: SAA, 2002.
WIRE ROPES ISO ISO 4309 2004 Cranes - Wire ropes - Care, maintenance, installation, examination and
discard / By International Organization for Standardization (ISO). 3rd ed. Geneva: ISO, 2004.
WIRES STANSA SANS 60851-5 2004 Winding wires - Test methods - P.5: Electrical properties / By
Standards South Africa (STANSA). Pretoria: STANSA, 2004.
WOOD BASED SHEET MATERIALS BSI BS EN 318 2002 Wood based panels - Determination of dimensional changes associated
with changes in relative humidit / By British Standards Institution (BSI). London: BSI, 2002.
WOODBASED SHEET MATERIALS BSI BS EN 311 2002 Wood-based panels - Surface soundness - Test method / By British
Standards Institution (BSI). London: BSI, 2002.
WORK STATIONS ISO ISO 8995 2002 Lighting of indoor work places / By International Organization for
Standardization (ISO). 2nd ed. Geneva: ISO, 2002. ISO 11205 2003 Acoustics - Noise emitted by machinery and equipment - Engineering
method for the determination of emission sound pressure levels in situ at the work station and atother specified positions using sound intensity / By International Organization for Standardization (ISO).Geneva: ISO, 2003.
WOVEN FABRICS STANSA SANS 1010 2004 Bunting / By Standards South Africa (STANSA). 3rd ed. Pretoria:
STANSA, 2004.
TISI Library Accession List (April-June 2005) Page 107
มาตรฐานผลิตภัณฑอุตสาหกรรม/มาตรฐานผลิตภัณฑชุมชนกระจก มอก. 2203 2547 กระจกลวดลาย / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 880 2547 กระจกโฟลตใส / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.กระจกโฟลต มอก. 880 2547 กระจกโฟลตใส / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.กระดาษ มผช. 430 2547 กระดาษธปูฤาษ ี / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 431 2547 กระดาษฟางขาว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 432 2547 กระดาษหญาแฝก / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 433 2547 กระดาษเปลอืกขาวโพด / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 434 2547 ผลิตภณัฑกระดาษธปูฤาษ ี / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 435 2547 ผลิตภณัฑกระดาษฟางขาว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 436 2547 ผลิตภณัฑกระดาษหญาแฝก / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1353 ล.13 2542 การทดสอบกระดาษและกระดาษแขง็ เลม 13 วธีิหาความตานแรงดดัโคง / โดย สํ านกังานมาตรฐานผลติ
ภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1353 ล.16 2542 การทดสอบกระดาษและกระดาษแขง็ เลม16 วธีิหาความตานแรงดงึเมือ่เปยก / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1353 ล.18 2542 การทดสอบกระดาษและกระดาษแขง็ เลม 18 วธีิหาความเรยีบของผวิกระดาษและกระดาษแขง็โดยวธีิ
ของเบคค / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1353 ล.5 2541 การทดสอบกระดาษและกระดาษแขง็ เลม 5 วธีิวดัคาแฟกเตอรการสะทอนแสงแบบกระจาย / โดย สํ านกั
งานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.กระดาษ - การทดสอบ มอก. 1353 ล.13 2542 การทดสอบกระดาษและกระดาษแขง็ เลม 13 วธีิหาความตานแรงดดัโคง / โดย สํ านกังานมาตรฐานผลติ
ภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1353 ล.16 2542 การทดสอบกระดาษและกระดาษแขง็ เลม16 วธีิหาความตานแรงดงึเมือ่เปยก / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1353 ล.18 2542 การทดสอบกระดาษและกระดาษแขง็ เลม 18 วธีิหาความเรยีบของผวิกระดาษและกระดาษแขง็โดยวธีิ
ของเบคค / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 108
กระดาษเปลือกขาวโพด มผช. 433 2547 กระดาษเปลอืกขาวโพด / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 437 2547 ผลิตภณัฑกระดาษเปลอืกขาวโพด / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.กระดาษฟางขาว มผช. 431 2547 กระดาษฟางขาว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 435 2547 ผลิตภณัฑกระดาษฟางขาว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.กระดาษหญาแฝก มผช. 432 2547 กระดาษหญาแฝก / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 436 2547 ผลิตภณัฑกระดาษหญาแฝก / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.กลอง มผช. 447 2547 กลองยาว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 448 2547 กลองสะบดัชยั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.การตกแตงและการประดับ มผช. 407 2547 ผลิตภณัฑฟางขาว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 408 2547 ผลิตภณัฑไมขนนุ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 409 2547 ผลิตภณัฑไมจามจรีุ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 410 2547 ผลิตภณัฑเศษไม / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 411 2547 ผลิตภณัฑกะลาตาล / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 412 2547 ผลิตภณัฑเศษผา / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 413 2547 ผลิตภณัฑผาใยบวั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 414 2547 หมอนฟกทอง / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 415 2547 พดั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 422(1) 2547 ดนิปน/ โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 424 2547 ผลิตภณัฑของจิว๋ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 425 2547 ผลิตภณัฑศลิปะบนเมลด็ขาวสาร / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 426 2547 ผลิตภณัฑศลิปะบนแกว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 427 2547 เครือ่งเขนิ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 428 2547 ผลิตภณัฑเปเปอรมาเช / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 109
การรบกวนคลื่นวิทยุ มอก. 2161 2547 คอมพวิเตอรสวนบคุคลและสวนประกอบเชงิหนาที:่ ขดีจ ํากดัสญัญาณรบกวนวทิย ุ / โดย สํ านกังานมาตร
ฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.การรบกวนทางแมเหล็กไฟฟา มอก. 2161 2547 คอมพวิเตอรสวนบคุคลและสวนประกอบเชงิหนาที:่ ขดีจ ํากดัสญัญาณรบกวนวทิย ุ / โดย สํ านกังานมาตร
ฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทฯ: สมอ., 2548.การหลอล่ืนและตัวหลอล่ืน มอก. 1796 2542 ผลิตภณัฑปโตรเลยีม - นํ ้ามนัหลอล่ืน และสารเตมิแตง - วธีิหาปรมิาณเถาซลัเฟต / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.เกสรผึ้ง มผช. 548 2547 เกสรผึง้ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.ขนม มผช. 459 2547 เคก / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 490 2547 เมลด็บวักรอบ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 504 2547 โรตกีึง่ส ําเรจ็รูป / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 524 2547 พาย / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.ขนมปง มผช. 523 2547 ขนมปงกรอบ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 526 2547 ขนมปงใสใส / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.ขนมอบกรอบ มผช. 460 2547 ขนมปงอบกรอบ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 490 2547 เมลด็บวักรอบ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มผช. 503 2547 โรตกีรอบ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.ขั้วตอ มอก. 2041 2543 สายรวมแกนและขอตอ เลม 3 สายรวมแกน 14mm และขอตอเฮอรมาโฟรไดท - อิมพแีดนซลักษณะ 50 และ 75
โอหม / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.ความเขากันไดทางแมเหล็กไฟฟา มอก. 2161 2547 คอมพวิเตอรสวนบคุคลและสวนประกอบเชงิหนาที:่ ขดีจ ํากดัสญัญาณรบกวนวทิย ุ / โดย สํ านกังานมาตร
ฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 110
ความปลอดภัย มอก. 366 2547 เตารดีไฟฟา เฉพาะดานความปลอดภยั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548. มอก. 1693 2547 เครือ่งท ํานํ ้ารอนไฟฟา นํ ้าผานรอนทนัท ีเฉพาะดานความปลอดภยั / โดย สํ านกังานมาตรฐานผลติภณัฑอุต
สาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.คอมพิวเตอร มอก. 2161 2547 คอมพวิเตอรสวนบคุคลและสวนประกอบเชงิหนาที:่ ขดีจ ํากดัสญัญาณรบกวนวทิย ุ / โดย สํ านกังานมาตร
ฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.คารบอนแบล็ก มอก. 1849 2542 สารผสมยาง - คารบอนแบลก็ - การหาคานํ ้าหนกัทีสู่ญเสยีจากความรอน / โดย สํ านกังานมาตรฐานผลติภณัฑ
อุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1850 2542 สารผสมยาง - คารบอนแบลก็ - การหาคาความแขง็ของเมด็คารบอนแบลก็ / โดย สํ านกังานมาตรฐานผลติ
ภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1851 2542 สารผสมยาง - คารบอนแบลก็ - การหาการกระจายตวัขนาดของเมด็คารบอนแบลก็ / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1853 2542 สารผสมยาง - คารบอนแบลก็(เมด็คารบอนแบลก็) - การหาปรมิาณวตัถุปลอมปน / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.เคร่ืองฆาเชื้อ มอก. 2007 2543 ความปลอดภยัของบรภิณัฑไฟฟาส ําหรับการวดั การควบคมุ และทีใ่ชในหองปฏบิตักิารทดสอบ ขอก ําหนด
เฉพาะส ําหรับหมอนึง่อดัไอนํ ้าและเครือ่งฆาเชือ้ใชกาซพษิ สํ าหรับการเตรยีมวสัดกุารแพทยและงานในหองปฏบิตักิาร / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
เคร่ืองใชไฟฟาในบาน มอก. 366 2547 เตารดีไฟฟา เฉพาะดานความปลอดภยั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548. มอก. 1039 2547หมอหงุขาวไฟฟา เฉพาะดานความปลอดภยั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.).
กรุงเทพฯ: สมอ., 2548. มอก. 1693 2547 เครือ่งท ํานํ ้ารอนไฟฟา นํ ้าผานรอนทนัท ีเฉพาะดานความปลอดภยั / โดย สํ านกังานมาตรฐานผลติภณัฑอุต
สาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 111
เคร่ืองใชสํ าหรับทารก - ผลิตภัณฑทํ าความสะอาด มอก. 2201 2547 ผลิตภณัฑท ําความสะอาดชนดิเหลวส ําหรับเครือ่งใชเดก็ออน / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาห
กรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.เคร่ืองทํ านํ้ ารอน มอก. 1693 2547 เครือ่งท ํานํ ้ารอนไฟฟา นํ ้าผานรอนทนัท ีเฉพาะดานความปลอดภยั / โดย สํ านกังานมาตรฐานผลติภณัฑอุต
สาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.เคร่ืองวัด มอก. 2006 2543 ความปลอดภยัของบรภิณัฑไฟฟาส ําหรับการวดั การควบคมุ และทีใ่ชในหองปฏบิตักิารทดสอบ ขอก ําหนด
เฉพาะส ําหรับหมอนึง่อดัไอนํ ้าส ําหรับการเตรยีมวสัดกุารแพทยและงานในหองปฏบิตักิาร / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
มอก. 2007 2543 ความปลอดภยัของบรภิณัฑไฟฟาส ําหรับการวดั การควบคมุ และทีใ่ชในหองปฏบิตักิารทดสอบ ขอก ําหนดเฉพาะส ําหรับหมอนึง่อดัไอนํ ้าและเครือ่งฆาเชือ้ใชกาซพษิ สํ าหรับการเตรยีมวสัดกุารแพทยและงานในหองปฏบิตักิาร / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
ชุดใหสารละลาย มอก. 1426 2546 ชุดใหสารละลายทางหลอดเลอืดใชคร้ังเดยีว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.).
กรุงเทพฯ: สมอ., 2548.เชื้อเพลิง มอก. 950 2547 แอลกอฮอลแขง็ส ําหรับใชเปนเชือ้เพลิง / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548.เตารีด มอก. 366 2547 เตารดีไฟฟา เฉพาะดานความปลอดภยั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548.ถาดรองอาบนํ้ า มอก. 2142 2546 ถาดรองอาบนํ ้าอะครริิกเสรมิใยแกว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548.เทคโนโลยีสารสนเทศ - อุปกรณ มอก. 2161 2547 คอมพวิเตอรสวนบคุคลและสวนประกอบเชงิหนาที:่ ขดีจ ํากดัสญัญาณรบกวนวทิย ุ / โดย สํ านกังานมาตร
ฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 112
เทอรโมพลาสติก มอก. 2152 2547 พอลิไวนลิคลอไรดแขง็ผสมเสรจ็ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548.นมเปรี้ยว มอก. 2146 2546 นมเปรีย้ว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.นํ้ ามันหลอล่ืน มอก. 1796 2542 ผลิตภณัฑปโตรเลยีม - นํ ้ามนัหลอล่ืน และสารเตมิแตง - วธีิหาปรมิาณเถาซลัเฟต / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.นํ ้ายาขัดลาง มอก. 2201 2547 ผลิตภณัฑท ําความสะอาดชนดิเหลวส ําหรับเครือ่งใชเดก็ออน / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาห
กรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.นํ ้ายาทํ าความสะอาด มผช. 456 2547 ผลิตภณัฑซักแหง / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 2201 2547 ผลิตภณัฑท ําความสะอาดชนดิเหลวส ําหรับเครือ่งใชเดก็ออน / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาห
กรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.นิเวศวิทยา - การจัดการ มอก. 14061 2547 ระบบการจดัการปาไมอยางยัง่ยนื: ขอก ําหนด / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.).
กรุงเทพฯ.; สมอ., 2548.ปูนซีเมนต มอก. 15 ล.1 2547 ปนูซเีมนตปอรตแลนด เลม 1 ขอก ําหนดเกณฑคณุภาพ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม
(สมอ.). กรุงเทพฯ: สมอ., 2548.ปูนยิปซัม มอก. 188 2547 ปนูยปิซมัส ําหรับการกอสราง / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.ผลิตภัณฑทํ าความสะอาด มอก. 2201 2547 ผลิตภณัฑท ําความสะอาดชนดิเหลวส ําหรับเครือ่งใชเดก็ออน / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาห
กรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.ผลิตภัณฑปโตรเลียม มอก. 1796 2542 ผลิตภณัฑปโตรเลยีม - นํ ้ามนัหลอล่ืน และสารเตมิแตง - วธีิหาปรมิาณเถาซลัเฟต / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 113
ผาอนามัย มอก. 295 2547 ผาอนามยัใชภายนอก / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.พลาสติก มอก. 2152 2547 พอลิไวนลิคลอไรดแขง็ผสมเสรจ็ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548. มอก. 2153 2547 พอลิไวนลิคลอไรดออนผสมเสรจ็ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548.พีวีซี มอก. 2152 2547 พอลิไวนลิคลอไรดแขง็ผสมเสรจ็ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548. มอก. 2153 2547 พอลิไวนลิคลอไรดออนผสมเสรจ็ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548.โพลิยูรีเทน มอก. 2151 2547 โพลิยรีูเทนเคลอืบผิวชนดิแยกสวนผสมสองสวน / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.).
กรุงเทพฯ: สมอ., 2548.ภาชนะพลาสติก มอก. 531 2546 ภาชนะพลาสตกิส ําหรับบรรจผุลิตภณัฑเภสชัปราศจากเชือ้ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม
(สมอ.). กรุงเทพฯ: สมอ., 2548.เภสัชภัณฑ มอก. 531 2546 ภาชนะพลาสตกิส ําหรับบรรจผุลิตภณัฑเภสชัปราศจากเชือ้ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม
(สมอ.). กรุงเทพฯ: สมอ., 2548.วัสดุและอุปกรณกอสราง มอก. 15 ล.1 2547 ปนูซเีมนตปอรตแลนด เลม 1 ขอก ําหนดเกณฑคณุภาพ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม
(สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 188 2547 ปนูยปิซมัส ําหรับการกอสราง / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 880 2547 กระจกโฟลตใส / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 2202 2547 สายไฟฟาแรงดนัสงูหุมดวยฉนวนครอสลงิกดพอลิเอทลีิน สํ าหรับแรงดนัไฟฟาทีก่ ําหนดตัง้แต 60 กโิลโวลต
ถึง 115 กโิลโวลต / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 2203 2547 กระจกลวดลาย / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 114
วัสดุและอุปกรณทางการแพทย มอก. 1426 2546 ชุดใหสารละลายทางหลอดเลอืดใชคร้ังเดยีว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.).
กรุงเทพฯ: สมอ., 2548. มอก. 2007 2543 ความปลอดภยัของบรภิณัฑไฟฟาส ําหรับการวดั การควบคมุ และทีใ่ชในหองปฏบิตักิารทดสอบ ขอก ําหนดเฉพาะ
สํ าหรับหมอนึง่อดัไอนํ ้าและเครือ่งฆาเชือ้ใชกาซพษิ สํ าหรับการเตรยีมวสัดกุารแพทยและงานในหองปฏบิตักิาร /โดย สํ านกังานมาตรฐานผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
วิธีทดสอบ มอก. 1353 ล.13 2542 การทดสอบกระดาษและกระดาษแขง็ เลม 13 วธีิหาความตานแรงดดัโคง / โดย สํ านกังานมาตรฐานผลติ
ภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1353 ล.16 2542 การทดสอบกระดาษและกระดาษแขง็ เลม16 วธีิหาความตานแรงดงึเมือ่เปยก / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1353 ล.18 2542 การทดสอบกระดาษและกระดาษแขง็ เลม 18 วธีิหาความเรยีบของผวิกระดาษและกระดาษแขง็โดยวธีิ
ของเบคค / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1353 ล.5 2541 การทดสอบกระดาษและกระดาษแขง็ เลม 5 วธีิวดัคาแฟกเตอรการสะทอนแสงแบบกระจาย / โดย สํ านกั
งานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1796 2542 ผลิตภณัฑปโตรเลยีม - นํ ้ามนัหลอล่ืน และสารเตมิแตง - วธีิหาปรมิาณเถาซลัเฟต / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.เวชภัณฑ มอก. 531 2546 ภาชนะพลาสตกิส ําหรับบรรจผุลิตภณัฑเภสชัปราศจากเชือ้ / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม
(สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1426 2546 ชุดใหสารละลายทางหลอดเลอืดใชคร้ังเดยีว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.).
กรุงเทพฯ: สมอ., 2548.สายไฟฟา มอก. 2202 2547 สายไฟฟาแรงดนัสงูหุมดวยฉนวนครอสลงิกดพอลิเอทลีิน สํ าหรับแรงดนัไฟฟาทีก่ ําหนดตัง้แต 60 กโิลโวลต
ถึง 115 กโิลโวลต / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
สายรวมแกน มอก. 2039 2543 สายรวมแกนและขัว้ตอ เลม 1 คณุลักษณะทีต่องการและวธีิวดั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาห
กรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 115
มอก. 2041 2543 สายรวมแกนและขอตอ เลม 3 สายรวมแกน 14 mm และขอตอเฮอรมาโฟรไดท - อิมพแีดนซลักษณะ 50 และ75 โอหม / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
สารผสมยาง มอก. 1849 2542 สารผสมยาง - คารบอนแบลก็ - การหาคานํ ้าหนกัทีสู่ญเสยีจากความรอน / โดย สํ านกังานมาตรฐานผลติภณัฑ
อุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1850 2542 สารผสมยาง - คารบอนแบลก็ - การหาคาความแขง็ของเมด็คารบอนแบลก็ / โดย สํ านกังานมาตรฐานผลติ
ภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1851 2542 สารผสมยาง - คารบอนแบลก็ - การหาการกระจายตวัขนาดของเมด็คารบอนแบลก็ / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1853 2542 สารผสมยาง - คารบอนแบลก็(เมด็คารบอนแบลก็) - การหาปรมิาณวตัถุปลอมปน / โดย สํ านกังานมาตรฐาน
ผลิตภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 1854 2542 สารผสมยาง - คารบอนแบลก็(เมด็คารบอนแบลก็) - การหาปรมิาณฝุนคารบอนแบลก็ / โดย สํ านกังานมาตร
ฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.สารลดแรงตึงผิว มอก. 2201 2547 ผลิตภณัฑท ําความสะอาดชนดิเหลวส ําหรับเครือ่งใชเดก็ออน / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาห
กรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.สิ่งแวดลอม - การจัดการ มอก. 14061 2547 ระบบการจดัการปาไมอยางยัง่ยนื: ขอก ําหนด / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.).
กรุงเทพฯ.; สมอ., 2548.สี มอก. 2151 2547 โพลิยรีูเทนเคลอืบผิวชนดิแยกสวนผสมสองสวน / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.).
กรุงเทพฯ: สมอ., 2548.เสนใยนํ าแสง มอก. 2165 2547 เคเบลิใยแกวน ําแสง เลม 3-10: เคเบลินอกอาคาร - ขอก ําหนดคณุลักษณะเปนรายกลุม สํ าหรับเคเบลิน ําแสง
โทรคมนาคมส ําหรับรอยทอและฝงโดยตรง / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 2167 2547 เคเบลิใยแกวน ําแสง เลม 3-30: เคเบลินอกอาคาร - ขอก ําหนดคณุลักษณะเปนรายกลุม สํ าหรับเคเบลิน ําแสงโทร
คมนาคม สํ าหรับการตอขามทะเลสาบและแมนํ ้า / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 116
หมอนึ่งอัดไอนํ้ า มอก. 2006 2543 ความปลอดภยัของบรภิณัฑไฟฟาส ําหรับการวดั การควบคมุ และทีใ่ชในหองปฏบิตักิารทดสอบ ขอก ําหนด
เฉพาะส ําหรับหมอนึง่อดัไอนํ ้าส ําหรับการเตรยีมวสัดกุารแพทยและงานในหองปฏบิตักิาร / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
มอก. 2007 2543 ความปลอดภยัของบรภิณัฑไฟฟาส ําหรับการวดั การควบคมุ และทีใ่ชในหองปฏบิตักิารทดสอบ ขอก ําหนดเฉพาะส ําหรับหมอนึง่อดัไอนํ ้าและเครือ่งฆาเชือ้ใชกาซพษิ สํ าหรับการเตรยีมวสัดกุารแพทยและงานในหองปฏบิตักิาร / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
หมอหุงขาว มอก. 1039 2547 หมอหงุขาวไฟฟา เฉพาะดานความปลอดภยั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.).
กรุงเทพฯ: สมอ., 2548.หมอไอนํ้ า มอก. 2006 2543 ความปลอดภยัของบรภิณัฑไฟฟาส ําหรับการวดั การควบคมุ และทีใ่ชในหองปฏบิตักิารทดสอบ ขอก ําหนด
เฉพาะส ําหรับหมอนึง่อดัไอนํ ้าส ําหรับการเตรยีมวสัดกุารแพทยและงานในหองปฏบิตักิาร / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
มอก. 2007 2543 ความปลอดภยัของบรภิณัฑไฟฟาส ําหรับการวดั การควบคมุ และทีใ่ชในหองปฏบิตักิารทดสอบ ขอก ําหนดเฉพาะส ําหรับหมอนึง่อดัไอนํ ้าและเครือ่งฆาเชือ้ใชกาซพษิ สํ าหรับการเตรยีมวสัดกุารแพทยและงานในหองปฏบิตักิาร / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
หองนํ้ า - อุปกรณ มอก. 2141 2546 อางอาบนํ ้าอะครลิิกเสรมิใยแกว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ.,
2548. มอก. 2142 2546 ถาดรองอาบนํ ้าอะครริิกเสรมิใยแกว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548.หองปฏิบัติการ มอก. 2006 2543 ความปลอดภัยของบริภัณฑไฟฟาสํ าหรับการวัด การควบคุม และที่ใชในหองปฏิบัติ
การทดสอบ ขอกํ าหนดเฉพาะสํ าหรับหมอนึ่งอัดไอนํ้ าสํ าหรับการเตรียมวัสดุการแพทยและงานในหองปฏิบัติการ / โดย สํ านักงานมาตรฐานผลิตภัณฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
มอก. 2007 2543 ความปลอดภัยของบริภัณฑไฟฟาสํ าหรับการวัด การควบคุม และที่ใชในหองปฏิบัติการทดสอบ ขอกํ าหนดเฉพาะสํ าหรับหมอนึ่งอัดไอนํ้ าและเครื่องฆาเชื้อใชกาซพิษ สํ าหรับการเตรียมวัสดุการแพทยและงานในหองปฏิบัติการ/ โดย สํ านักงานมาตรฐานผลิตภัณฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 117
อางอาบนํ้ า มอก. 2141 2546 อางอาบนํ ้าอะครลิิกเสรมิใยแกว / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.อาหาร, สุขลักษณะ มอก. 34 2546 ขอปฏิบตัแินะน ําระหวางประเทศ: หลักการทัว่ไปเกีย่วกบัสขุลักษณะอาหาร / โดย สํ านกังานมาตรฐานผลติ
ภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.อุปกรณโทรคมนาคม มอก. 2039 2543 สายรวมแกนและขัว้ตอ เลม 1 คณุลักษณะทีต่องการและวธีิวดั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาห
กรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 2041 2543 สายรวมแกนและขอตอ เลม 3 สายรวมแกน 14mm และขอตอเฮอรมาโฟรไดท - อิมพแีดนซลักษณะ 50 และ 75
โอหม / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.อุปกรณสื่อสาร มอก. 2039 2543 สายรวมแกนและขัว้ตอ เลม 1 คณุลักษณะทีต่องการและวธีิวดั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาห
กรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 2041 2543 สายรวมแกนและขอตอ เลม 3 สายรวมแกน 14 mm และขอตอเฮอรมาโฟรไดท - อิมพแีดนซลักษณะ 50 และ
75 โอหม / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.อุปกรณอิเล็กทรอนิกส มอก. 2039 2543 สายรวมแกนและขัว้ตอ เลม 1 คณุลักษณะทีต่องการและวธีิวดั / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาห
กรรม (สมอ.). กรุงเทพฯ: สมอ., 2548. มอก. 2041 2543 สายรวมแกนและขอตอ เลม 3 สายรวมแกน 14 mm และขอตอเฮอรมาโฟรไดท - อิมพแีดนซลักษณะ 50 และ
75 โอหม / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ: สมอ., 2548.แอลกอฮอลแข็ง มอก. 950 2547 แอลกอฮอลแขง็ส ําหรับใชเปนเชือ้เพลิง / โดย สํ านกังานมาตรฐานผลติภณัฑอุตสาหกรรม (สมอ.). กรุงเทพฯ:
สมอ., 2548.
TISI Library Accession List (April-June 2005) Page 118
Alphabetical Subject Index
Subject PageAccelerated corrosion tests 1Accident prevention 1Acetylene 1Acoustic filters 1Acoustic measurement 1Acoustics 2Acoustoelectric devices 2Acrylonitrile butadiene styrene 2Adhesion tests 2Adhesive strength 2Adhesives 2Air 2Aircraft propellers 3Ammonia 3Anaesthetic equipment 3Angles (metal sections) 3Animal feed 3Antennae 4Approval testing 4Arc-welding equipment 4Argon 4Arithmetic 4Atomic absorption spectrophotometry 4Audio equipment 5Audio systems 5Audiometers 5Audiovisual materials 5Automatic control systems 5Axial-thrust bearings 6Axles 6Ball bearings 6Banks 7Bar codes 7
TISI Library Accession List (April-June 2005) Page 119
Subject PageBath production 7Belt drives 7Bins 7Biological analysis and testing 7Blast-cleaning 7Blood transfusion equipment 8Board (paper) 8Boats 8Brakes 8Braking 8Braking systems 8Breakdown voltage 8Bridges 9Buildings 9Buoyancy 9Buses 9Cadmium 9Camping equipment 9Capacitors 10Caravans 10Carbon dioxide 10Cast-iron 10Cellular concrete 10Cellular materials 10Centrifugal pumps 10Ceramics 11Cheese 11Chemical analysis and testing 11Chromium 11Classifying (documents) 12Cleaning equipment 12Closures 12Cloth 12Coal 12Coal mining 12
TISI Library Accession List (April-June 2005) Page 120
Subject PageCoatings 13Coaxial cables 13Coding (data conversion) 13Colour-fastness tests 13Communication technology 13Compression testing 14Computerized control 14Concentrates 14Concrete admixtures 14Conical shape 14Construction equipment 15Construction materials 15Containers 15Control charts 15Control equipment 15Conveyor belts 15Cooking appliances 15Copper 16Corrosion resistance 16Corrosion-resistant steels 16Cranes 16Creep testing 16Cross-linked materials 16Cylindrical shape 17Data analysis 17Data representation 17Data structures 17Data transmission 18Density measurement 18Dental materials 18Designations 18Detail specification 18Determination of content 18Diagrams 19Dielectric devices 19
TISI Library Accession List (April-June 2005) Page 121
Subject PageDimensional changes 19Dimensional measurement 20Dishwashing machines 20Display devices (computers) 20Doors 20Drainage 20Drainpipes 20Drilling 20Drilling machines 21Drop tests 21Dumpers trucks 21Dynamic testing 21Earphones 21Elastomers 21Electric ballasts 21Electric cables 22Electric conduits 22Electric connectors 22Electric control equipment 22Electric measurement 23Electric power systems 23Electric power transmission lines 23Electric reactors 23Electric regulators 23Electric supply meters 23Electric wires 24Electrical components 24Electrical conductivity 24Electrical enclosures 24Electrical engineering 24Electrical equipment 24Electrical household appliances 25Electrical installations 25Electrical insulating materials 26Electrical insulation 26
TISI Library Accession List (April-June 2005) Page 122
Subject PageElectrical measurement 26Electrical measuring instruments 26Electrical medical equipment 26Electricity supply meters 27Electromagnetic compatibility (EMC) 27Electromagnetic radiation 27Electromagnetism 27Electronic equipment and components 27Electrostatics 28Emission 28Endurance testing 28Energy sources 28Engineering drawings 28Environmental engineering 29Environmental testing 29Epoxy resins 29Equipment safety 29Essential oils 30Evaporated milk 30Expanding cement 30Explosive atmospheres 30Fabric testing 30Falling-object protective structures 30Fatigue testing 30Fats 31Fibre optic cables 31Fibre optic connectors 31Fibre optics 31Fibres 31Fifth wheels 31Filament lamps 31Fire alarms 32Fire detectors 32Fire-resistant materials 32Fire sprinklers 32
TISI Library Accession List (April-June 2005) Page 123
Subject PageFire tests 32Fits 33Flameproof materials 33Flammability 33Flatness measurement 33Flexible pipes 33Fluorescent lamps 34Food products 34Footwear 34Fork trucks 34Formaldehyde 34Fuels 34Fuses 35Fusion welding 35Gas chromatography 35Gas pipelines 35Gas pipes 35Gas-powered devices 35Gas welding 36Gas-welding equipment 36Gate valves 36Gear drives 36Glass 36Glow plugs 36Glycols 36Grades (quality) 36Graphic representation 37Graphic symbols 37Graphic technology 37Graphical symbols 37Halogenated hydrocarbons 37Hand tools 37Headlamps 38Health services 38Heat pumps 38
TISI Library Accession List (April-June 2005) Page 124
Subject PageHeaters 38Helium 38Hexagonal-head fasteners 38High voltage 38Hoists 38Hollow sections 39Household equipment 39Houses 39Hydraulic fluids 39Hydraulic transmission systems 39Hydrogen 39Hydrology 39Ice cream 39Identification methods 40Identity cards 40Impact testing 40Implants (surgical) 40Impulse-voltage tests 40Induction motors 41Industrial trucks 41Information 41Information exchange 41Information systems 42Information technology 42Information theory 43Infrared radiation 43Insulated coatings 43Insulating coatings 43Insulating oils 43Integrated circuits 44Interfaces 44Interfaces (data processing) 44Internal combustion engines 45Internal pressure 45Ions 45
TISI Library Accession List (April-June 2005) Page 125
Subject PageIron 45Joints 45Karl Fischer method 45Kerosine 46Knitted fabrics 46Labelling (process) 46Laboratory testing 46Lamp caps 46Lasers 46Lead 47Lead-acid batteries 47Library and information science 47Life jackets 47Lifts 47Lifts - Installation 47Lighting systems 47Limes 48Linear density 48Linear measurement 48Load capacity 48Low voltage 48Lubricants 49Lubricating systems 49Luminaires 49Magnetic-particle flaw detection 49Man-made fibres 49Management techniques 49Manganese ores 50Marine engines 50Marine instruments 50Marking 50Markup 50Mass 51Materials in contact with food 51Measuring instruments 51
TISI Library Accession List (April-June 2005) Page 126
Subject PageMechanical shock 51Mechanical testing 51Medical equipment 51Medical instruments 52Mercury 52Metadata 52Metal coatings 52Metals 52Microbiological analysis 53Microbiology 53Microphones 53Microprocessors 53Milk 53Minerals 54Modulus of elasticity 54Modulus of rupture 54Monolithic materials 54Mopped 54Mortars 54Motor vehicles 54Moulding equipment 55Mowers 55Natural gas 55Navigation 55Nickel 56Nickel-cadmium batteries 56Nitrates 56Nitrites 56Nitrogen 56Noise (environmental) 56Non-destructive testing 56Nuclear-electric power stations 57Nuclear fuels 57Nursing 57Oceangraphy 57
TISI Library Accession List (April-June 2005) Page 127
Subject PageOptical fibres 57Optical instruments 57Oxidation methods 58Oxidation resistance 58Oxygen 58Paints 58Pallets 58Paper 58Paper pulp 59Particle boards 59Particle size distribution 59Passenger transport 59Penetrant flaw detection 59Performance testing 59Personal protective equipment 60Pesticides 60Petroleum 60Petroleum products 60Petroleum technology 61pH measurement 61Pharmaceutical technology 61Phenolic resins 61Photographic materials 61Physico-chemical methods 61Pigs (castings) 61Pipe fittings 62Pipelines 62Pipes 62Pipes - Polyethylene 63Pipework systems 63Piston rings 64Plain bearings 64Plastics 65Plastics and rubber technology 65Plastics-working machinery 66
TISI Library Accession List (April-June 2005) Page 128
Subject PagePneumatic equipment 66Pneumatic transmission systems 66Polyamides 66Polybutylene 66Polyethylene 66Polymers 67Polypropylene 67Polystyrene 67Polyvinylidene chloride 68Potassium 68Power cables 68Power transformers 68Precast concrete 68Precision 68Preferred numbers 69Press tools 69Pressure pipes 69Pressure regulators 69Pressure testing 69Pressure vessels 69Printed-circuit boards 69Process control 69Programming 70Programming languages 70Prosthetic devices 71Protective clothing 71Protocol 72Pumps 72Purchasing 72Quality 72Quality control 73Radiation protection 73Radio disturbances 73Radiographic testing 73Railway electric traction equipment 74
TISI Library Accession List (April-June 2005) Page 129
Subject PageRailway vehicles 74Railway wagons 74Raw materials 74Reaction turbines 74Ready-mixed materials 74Receivers 74Refractory materials 74Refrigerators 75Reinforced concrete 75Reinforced plastics 75Reinforcing materials 75Relays 75Reliability 75Repiratory systems 76Reproduction machines 76Resistance-welding equipment 76Resonators 76Respirators 76Rivets 76Road vehicle components 77Road vehicle engineering 77Road vehicles 77Rocks 77Rolling bearings 78Roofing tiles 78Rotating electric machines 78Roundness measurement 78Roving (textile process) 78Safety devices 78Safety harnesses 79Safety lines 79Safety measures 79Saffron 80Sag (deformation) 80Sampling methods 80
TISI Library Accession List (April-June 2005) Page 130
Subject PageScaffolds 81School uniforms 81Screws (belts) 82Sealing materials 82Sealing rings 82Seals 82Seamless pipes 82Securities 82Sedimentation number 82Semiconductor devices 82Sensory analysis (food) 83Set screws 83Sheet materials 83Skin-treatment appliances 83Sleepers 83Sockets (threaded) 84Sodium 84Software techniques 84Soil testing 84Soils 84Solar power 84Solids content determination 84Solvents 85Sound broadcasting 85Sound insulation 85Sound intensity 85Space-heating systems 85Space technology 85Specimen preparation 86Spectacles (eyeglasses) 87Spectrophotometry 87Spraying (coating) 87Springs 87Stainless steels 87Stamping (production process) 87
TISI Library Accession List (April-June 2005) Page 131
Subject PageStandard atmosphere 87Standard deviation 88Starters (lamps) 88Static loading 88Statistical methods of analysis 88Statistics 88Steels 88Stiffness 89Storage 89Straightness measurement 89Straps 89Structural timber 90Sulphur dioxide 90Surface properties 90Surface treatment 90Surge protection 90Switchgear 90Tachographs 91Tea 91Technical documents 91Telephone networks 91Television broadcasting 92Television receivers 92Temperature 92Tensile testing 92Terminal blocks 92Terminology 92Test specimens 93Testing 93Testing conditions 95Textile floor coverings 96Textile glass 96Textile products 96Textile technology 96Textiles 96
TISI Library Accession List (April-June 2005) Page 132
Subject PageThermal protection 97Thermoplastic polymers 97Thermosetting polymers 97Tin 97Tolerances of position 98Torsion strength 98Torsion testing 98Towed road vehicles 98Tower cranes 98Toxicity 98Toys 98Trailers 99Transceivers 99Transformers 99Transmittance 99Transportation 99Tubes (packages) - Blood 99Tubing (medical) 100Unplasticized polyvinyl chloride 100Vacuum cleaners 100Valves 100Varnishes 100Vehicle components 100Ventilators 100Vibration 100Vibration testing 101Video signals 101Visual inspection (testing) 101Vitamin B complex 101Vocabulary 101Volume measurement 102Vulcanised rubber 102Washers 102Washing machines 102Watch-glasses 103
TISI Library Accession List (April-June 2005) Page 133
Subject PageWatches 103Water 103Water absorption 103Water heaters 104Water - Quality 104Water - Quality control 104Water-resistance tests 104Water supply 104Water supply and waste systems (buildings) 104Water testing 104Weathering 105Welded joints 105Welding 105Welding processes 105Welding with pressure 106Winches 106Wire ropes 106Wires 106Woodbased sheet materials 106Work stations 106Woven fabrics 106
TISI Library Accession List (April-June 2005) Page 134
บัญชีหัวเรื่องหัวเร่ือง หนากระจก 107กระจกโฟลต 107กระดาษ 107กระดาษ - การทดสอบ 107กระดาษเปลอืกขาวโพด 108กระดาษฟางขาว 108กระดาษหญาแฝก 108กลอง 108การตกแตงและการประดบั 108การรบกวนคลืน่วทิยุ 109การรบกวนทางแมเหล็กไฟฟา 109การหลอล่ืนและตวัหลอล่ืน 109เกสรผึง้ 109ขนม 109ขนมปง 109ขนมอบกรอบ 109ขัว้ตอ 109ความเขากันไดทางแมเหล็กไฟฟา 109ความปลอดภยั 110คอมพวิเตอร 110คารบอนแบลก็ 110เครือ่งฆาเช้ือ 110เครือ่งใชไฟฟาในบาน 110เครื่องใชสํ าหรับทารก - ผลติภณัฑทํ าความสะอาด 111เครื่องทํ านํ้ ารอน 111เครือ่งวดั 111ชุดใหสารละลาย 111
TISI Library Accession List (April-June 2005) Page 135
หัวเร่ือง หนาเช้ือเพลิง 111เตารดี 111ถาดรองอาบนํ ้า 111เทคโนโลยสีารสนเทศ - อุปกรณ 111เทอรโมพลาสตกิ 112นมเปรีย้ว 112นํ ้ามนัหลอล่ืน 112นํ ้ายาขดัลาง 112นํ ้ายาท ําความสะอาด 112นเิวศวทิยา - การจดัการ 112ปนูซเีมนต 112ปนูยปิซมั 112ผลติภณัฑท ําความสะอาด 112ผลติภณัฑปโตรเลยีม 112ผาอนามยั 113พลาสตกิ 113พีวซีี 113โพลิยูรีเทน 113ภาชนะพลาสตกิ 113เภสัชภณัฑ 113วสัดแุละอุปกรณกอสราง 113วสัดแุละอุปกรณทางการแพทย 114วธิทีดสอบ 114เวชภณัฑ 114สายไฟฟา 114สายรวมแกน 114สารผสมยาง 115สารลดแรงตงึผวิ 115
TISI Library Accession List (April-June 2005) Page 136
หัวเร่ือง หนาส่ิงแวดลอม - การจดัการ 115สี 115เสนใยน ําแสง 115หมอนึง่อัดไอนํ ้า 116หมอหุงขาว 116หมอไอนํ ้า 116หองนํ ้า - อุปกรณ 116หองปฏิบตักิาร 116อางอาบนํ ้า 117อาหาร, สุขลกัษณะ 117อุปกรณโทรคมนาคม 117อุปกรณส่ือสาร 117อุปกรณอิเล็กทรอนกิส 117แอลกอฮอลแขง็ 117