holmbury inc product overview - v7 · 2020. 1. 17. · the iso 16028 standard ... 720 bar | 10440...
TRANSCRIPT
Hydraulic Couplers and Valveswww.holmbury.com
PRODUCT OVERVIEW
Flat face couplers made to the ISO 16028 Standard
Body Sizes- 1/4” - 1”Thread Sizes - 1/4” - 1”Thread Forms -BSP, NPT, SAE, JIC, ORFS, METRICPressure Rating - 260 - 400 bar | 3770 - 5800 psi Material - Carbon SteelPlating - Zinc Nickel
Connect under pressure�at face male couplersmade to the ISO 16028 Standarddimensions
Body Sizes- 3/8” - 3/4”Thread Sizes - 3/8” - 1”Thread Forms - BSP, NPT, SAEPressure Rating - 350 bar | 5075 psiMaterial - Carbon SteelPlating - Zinc Nickel
90˚ Flat face couplers madeto the ISO 16028 Standard
Body Sizes- 1/2”Thread Sizes - 12 JIC | 06 JIC | 08 SAEPressure Rating -350 bar | 5075 psi Thread Forms - SAE, JICMaterial - Carbon SteelPlating - Zinc Nickel
High pressure �at facecouplers �tted with a safetylocking sleeve
Body Sizes- 3/8” Thread Sizes - 1/4“ - 3/8” Thread Forms - NPTPressure Rating - 720 bar | 10440 psiMaterial - Carbon SteelPlating - Zinc Nickel
HQ Series
HCP Series HP Series
H90 Series
NEW PRODUCTS
www.holmbury.com
MP Series - Multiplate couplers available in 2, 4, 6 and 8 way design
HDB Series - Decompression block to replace skid steer OEMblock
FFC Series - Replacement cartridge couplers for Faster 4BD4FH/I blocks�tted to skid steer loaders
Screw connect �at face couplers. Blow out preventer(BOP) certi�cation on sizes12|19|25|32
Body Sizes- 3/8” - 11/4”Thread Sizes - 3/8” - 11/2”Thread Forms - BSP, NPT, SAEPressure Rating - 400 - 550 bar | 5800 - 7975 psiMaterial - Carbon SteelPlating - Zinc Nickel
Heavy duty screw connect couplers
Body Sizes- 3/8” - 2”Thread Sizes - 3/8” - 2” Thread Forms - BSPPressure Rating - 250 - 500 bar | 3625 - 7250 psiMaterial - Carbon SteelPlating - Zinc Chromate
Extra heavy duty high �owcouplers
Body Sizes- 11/4”Thread Sizes - 11/4” (SAE)Connections - SAE, 3000 SAE FlangePressure Rating - 380 bar | 5500 psiMaterial - Carbon SteelPlating - Zinc Nickel
High pressure heavyduty screw connect couplers
Body Sizes- 1/4” - 2”Thread Sizes - 1/4” - 2”Thread Forms - BSP, NPT, SAEPressure Rating - 400 - 800 bar | 5800 - 11600 psiMaterial - Carbon SteelPlating - Zinc Chromate
General purpose screwconnect couplers made tothe ISO 14541 Standard
Body Sizes- 1/4” - 11/4“Thread Sizes - 1/4” - 1½”Thread Forms - BSP, NPT, SAE, METRICPressure Rating - 300 - 450 bar | 4350 - 6525 psiMaterial - Carbon SteelPlating - Zinc Chromate
Zero leakage screw connectcouplers
Body Sizes- 3/8” - 1”Thread Sizes - M14 - M52 Thread Forms - METRICPressure Rating - 300 - 420 bar | 4350 - 6100 psiMaterial - Carbon SteelPlating - Zinc Nickel
High pressure screw connectpoppet couplers made to theISO 14540 Standard
Body Sizes- 1/4” & 3/8”Thread Sizes - 1/4” & 3/8”Thread Forms - NPTPressure Rating - 720 bar |10440 psi (PSB)1000 bar |14500 psi (PSP)Material - Carbon SteelPlating - Zinc Chromate
Screw connect tipper couplers
Body Sizes- 3/4” & 1”Thread Sizes - 3/4” & 1”Thread Forms - BSPPressure Rating - 250 bar | 3625 psiMaterial - Carbon SteelPlating - Zinc Chromate
HFT Series
5000 Series
PS Series
PTC Series TC Series
PSP | PSB Series
RS | RK | RH Series
HS Series
HOLMBURY LTD - [email protected] | +44 (0) 1732 378912
Heavy duty screw connect couplers. Blowout Preventer (BOP)Certi�ed in sizes 19|25|32
Body Sizes- 3/4” - 2”Thread Sizes - 3/4” - 2”Thread Forms - NPTPressure Rating - 320 - 350 bar | 4640 - 5075 psiMaterial - Carbon SteelPlating - Zinc Chromate
Wing style screw connect brass couplers with steel nut
Body Sizes- 3/4” - 11/2“Thread Sizes - 1/2” - 1½”Thread Forms - NPTPressure Rating - 170 - 210 bar | 2465 - 3045 psiMaterial - Brass (Cast Steel sleeve)Plating - Zinc Chromate(Sleeve only)
Connect under pressure high�ow couplers �tted with asafety locking sleeve
Body Sizes- 3/8” - 1”Thread Sizes - 3/8” - 1”Thread Forms - BSPPressure Rating - 250 bar | 3625 psiMaterial - Carbon SteelPlating - Zinc Nickel
Free �ow valvelesspressure washer couplers
Body Sizes- 3/8” Thread Sizes - 3/8” Thread Forms - BSP, NPTPressure Rating - 350 bar | 5075 psiMaterial - Carbon SteelPlating - Zinc Chromate
Screw connect and pull breakcouplers interchangeablewith the DIN V series probes(Except size 19 body in Europe)
Body Sizes- 1/4” - 1” Thread Sizes - 1/4” - 1” Thread Forms - BSP, NPTPressure Rating - 230 - 300 bar | 3335 - 4350 psi Material - Carbon SteelPlating - Zinc Chromate
Poppet style couplers with a guided poppet
Body Sizes- 1/4” - 2”Thread Sizes -1/4” - 2” Thread Forms - BSP, NPTPressure Rating - 160 - 350 bar | 2320 - 5075 psiMaterial - Carbon SteelPlating - Zinc Chromate
Trailer brake couplers
Body Sizes- 1/2”Thread Sizes - 3/8”, 1/2”, M18, M20Thread Forms - BSP, METRICPressure Rating - 220 bar | 3190 psiMaterial - Carbon SteelPlating - Zinc Chromate
In-line and 90˚ rotarycouplers
Body Sizes- 1/4” - 2”Thread Sizes - 1/4” - 2”Thread Forms - BSP, NPT, SAEPressure Rating - 180 - 400 bar | 2610 - 5801 psiMaterial - Carbon SteelPlating - Zinc Chromate
LC Series
WSC Series
GGIL | GG90 Series
TB Series
HTN Series
PLC Series
F Series
PWC Series
HOLMBURY LTD - [email protected] | +44 (0) 1732 378912
Screw connect and pull breakcouplers interchangeablewith the DIN V series probes(Except size 19 body in Europe)
Body Sizes- 1/4” - 1” Thread Sizes - 1/4” - 1” Thread Forms - BSP, NPTPressure Rating - 230 - 300 bar | 3335 - 4350 psi Material - Carbon SteelPlating - Zinc Chromate
In-line check valves
Body Sizes- 1/8” - 2”Thread Sizes - 1/8” - 2”Thread Forms - BSP, NPT, SAEPressure Rating -250 - 400 bar | 2900 - 5800 psi Material - Carbon SteelPlating - Zinc Chromate
2 and 3 way high pressureball valves
Body Sizes-1/4” - 2”Thread Sizes - 1/4” - 2”Thread Forms - BSP, NPT, SAE, METRICPressure Rating -350 - 500 bar | 5075- 7250 psiMaterial - Carbon SteelPlating - Zinc Chromate
Multiplate couplers
Body Sizes- 3/8”-1/2“Plate Connections- 2 - 8Thread Sizes - 1/2” - 3/4”Thread Forms - BSP, NPT, SAE,METRICPressure Rating -350 bar | 5075 psi Material (Couplers) - Carbon SteelPlating (Couplers) - Zinc Nickel
Replacement cartridge couplersfor the Faster 4BD4FH/4BD4FI
Body Sizes- 1/2”Thread Sizes - 46mm or 48mmThread Forms - METRICPressure Rating - 350 bar | 5075 psi Material - Carbon SteelPlating - Zinc Nickel
Hose burst valves
Body Sizes- 1/4” - 1”Thread Sizes - 1/4” - 1”Thread Forms - BSPPressure Rating - 350 bar | 5075 psi Material - Carbon SteelPlating - Zinc Chromate
Decompression block couplers
Body Sizes- 1/2”- 3/4“Pressure Rating -350 bar | 5075 psi Material (Couplers) - Carbon SteelPlating (Couplers) - Zinc Nickel
Range of accessories availableincluding:
Dust caps & plugsParking stationsSeal kitsRepair kitsValve handlesValve locking kits
MP Series
DTP SeriesBVC2 | BVC3 Series
HDB Series
Accessories
CV Series VPC Series
HOLMBURY INC - [email protected] | +1 (866) 465-6287
Diagnostic test point couplers made to the ISO 15171-1 Standard
Body Sizes- 1/8” Thread Sizes - 1/8” - 3/8”Thread Forms - BSP, NPT, SAE, METRICPressure Rating -400 bar | 5800 psiMaterial - Carbon SteelPlating - Zinc Chromate
FFC Series
Stainless steel couplers made dimensionally to the ISO 16028Standard (Standard applies upto 1” body)
Body Sizes- 1/4” - 11/2”Thread Sizes - 1/4” - 2”Thread Forms - BSP, NPT, SAEPressure Rating - 100 - 300 bar | 1450 - 4350 psiMaterial - AISI 316
Stainless steel ISO A couplers made dimensionally tothe ISO 7241:2014(E) Series A Standard
Body Sizes- 1/4” - 2”Thread Sizes - 1/4” - 2”Thread Forms - BSP, NPTPressure Rating -90 - 300 bar | 1305 - 4350 psi Material - Stainless Steel
Stainless steel heavy dutyhigh pressure screw connectcouplers
Body Sizes- 1/4” - 1½”Thread Sizes - 1/4” - 1½”Thread Forms - BSP, NPT, SAEPressure Rating -365 - 700 bar | 5300 - 10150 psi Material - AISI 316
Stainless steel in-line and 90˚ rotary couplers
Body Sizes- 1/4” - 2”Thread Sizes - 1/4” - 2”Thread Forms - BSP, NPTPressure Rating -150 - 350 bar | 5075 psi Material - AISI 316
Stainless steel general purposescrew connect couplersmade dimensionally to the ISO 14541 Standard
Body Sizes- 1/4” - 11/4” Thread Sizes - 1/4” - 1½” Thread Forms - BSP, NPT, SAEPressure Rating - 140 - 300 bar | 2030 - 4350 psiMaterial - AISI 316
Stainless steel ISO B couplers made dimensionally tothe ISO 7241:2014(E) Series B Standard
Body Sizes- 1/8” - 2”Thread Sizes - 1/8” - 2”Thread Forms - BSP, NPTPressure Rating -90 - 300 bar | 1305 - 4350 psi Material - Stainless Steel
Stainless steel in-line check valves
Body Sizes- 1/8” - 2”Thread Sizes - 1/8” - 2”Thread Forms - BSP, NPTPressure Rating - 180 - 350 bar | 2610 - 5075 psiMaterial - AISI 316
Stainless steel 2 and 3 way high pressure ball valves
Body Sizes- 1/4” - 2”Thread Sizes - 1/4” - 2”Pressure Rating -250 - 500 bar | 3625 - 7250 psi Thread Forms - BSP, NPTMaterial - AISI 316
HSS Series
IAS Series
PTS Series
SRIL | SR90 Series BVS2 | BVS3 Series
CVS Series
IBS Series
SHS Series
HOLMBURY INC - [email protected] | +1 (866) 465-6287
ISO A couplers made to theISO 7241:2014 (E) Series A Standard
Body Sizes-1/4” - 2”Thread Sizes - 1/4” - 2”Thread Forms - BSP, NPT, SAE, METRICPressure Rating - 130 - 350 bar | 1885 - 5075 psiMaterial - Carbon SteelPlating - Zinc Chromate | Optional Zinc Nickel
ISO B couplers made to theISO 7241:2014 (E) Series B Standard
Body Sizes- 1/8” - 2” Thread Sizes - 1/8” - 2” Thread Forms - BSP, NPT, SAEPressure Rating - 90 - 300 bar | 1300 - 4350 psiMaterial - Carbon SteelPlating - Zinc Chromate | Optional Zinc Nickel
Connect under pressurefemale couplers (Connectswith IA and DIN Series1/2” male)
Body Sizes- 1/2” Thread Sizes - 1/2” Thread Forms - METRICPressure Rating - 300 bar | 4350 psiMaterial - Carbon SteelPlating - Zinc Chromate
Connect under pressureISO A couplers made to theISO 7241-2014 (E) Series A Standard
Body Sizes- 1/2” Thread Sizes -1/2” Thread Forms - BSPPressure Rating - 250 bar | 3625 psiMaterial - Carbon SteelPlating - Zinc Chromate
DIN style couplers also known commonly as “ag coupling”.Made to the ISO 7241:2014 (E)Series A and ISO 5675 Standards
Body Sizes- 1/2”Thread Sizes - 1/2”Thread Forms - BSP, NPT, SAEPressure Rating - 250 bar | 3625 psi Material - Carbon SteelPlating - Zinc Chromate | Optional Zinc Nickel
ISO B brass couplers to theISO 7241-2014 (E) Series B Standard dimensionally
Body Sizes- 1/4” - 1”Thread Sizes -1/4” - 1”Thread Forms - BSP, NPTPressure Rating - 100 - 200 bar | 1450 - 2900 psiMaterial - Brass
ISO A push / pull couplers(Connects with IA and DIN Series 1/2” male)
Body Sizes-1/2”Thread Sizes - 1/2”Thread Forms - BSP, NPT, SAE, METRICPressure Rating - 250 bar | 3625 psiMaterial - Carbon SteelPlating - Zinc Chromate
Poppet and ball style couplers made to the ISO 5675 Standard (Standard only on 1/2” worldwide& 3/4“ in Europe)
Body Sizes- 1/4” - 1”Thread Sizes - 1/4” - 1”Thread Forms - BSP, NPT, SAEPressure Rating - 230 - 350 bar | 3335 - 5075 psiMaterial - Carbon SteelPlating - Zinc Chromate| Optional Zinc Nickel
IA Series
IB Series
IAP Series
IAPC Series DINV | DINB Series
P Series
IBB Series
DINV 12 | DINB 12
www.holmbury.com
HOLMBURY LTD HOLMBURY INCPremier House, 1 Vale Rise Tonbridge, Kent, TN9 1TB
Tel: +44 (0) 1732 378912Fax: +44 (0) 1732 357666Email: [email protected]: www.holmbury.com/gb
33801 Curtis Blvd, Suite 104 Eastlake, OH 44095
Tel: +1 (866) 465-6287Fax: +1 (440) 578-1073Email: [email protected]: www.holmbury.com/us
Connect with quality - Connect with Holmbury
HOLMBURY GROUP
The information in this publication is for guidance only and is not binding.
© Holmbury Group. All rights reserved
Issue 2a HBI
Distributor details: