HMS140S/HMS200S/HMS260S/HMS320S Stationary Storage SiloS

HMS140S/HMS200S HMS260S/HMS320S Stationary Storage SiloS

Features:• Drivetype:DC130/190/250Doublededuction,shaft-mountedreducer,24.3:1ratio.DC330three-stagereduction:belt/planetary/chainw/15-and48-toothdrivesprockets

• Steelslugfeeder:0.25in(6mm)plate,.25in(6mm)ARsteelliner

• Dual-dischargegate:4ft11inx12in(1,498.6mmx304.8mm)withelastomercompressionseals

• Steelcone:0.25in(6mm)plate,.25in(6mm)ARsteelliner

• Dragchainconveyorcapacity650ton/hr(590tonne/hr)

• Dragchainconveyor:DC130/190/25037in(939.8mm)deep.25in(6.35mm)steelplateDC33051.5in(1,308mm)deep0.375in(9mm)steelplate

• Conveyorwearoverlay:chromiumcarbidesteel0.75in(19mm)thick

• Conveyorsideliners:.50in(13mm)thickARsteel

• Siloboxframe:30in(762mm)flangebeams

• Safetygate:4in(102mm)floorstructurecloseswithclamgatefailureorlossofsiloelectricity

HMS140S/200S/260S/320S SpecificationS

EffectiveDate:October2009.Productspecificationsandpricesaresubjecttochangewithoutnoticeorobligation.Thephotographsand/ordrawingsinthisdocumentareforillustrativepurposesonly.RefertotheappropriateOperator’sManualforinstructionsontheproperuseofthisequipment.FailuretofollowtheappropriateOperator’sManualwhenusingourequipmentortootherwiseactirresponsiblymayresultinseriousinjuryordeath.TheonlywarrantyapplicabletoourequipmentisthestandardwrittenwarrantyapplicabletotheparticularproductandsaleandTerexmakesnootherwarranty,expressorimplied.Productsandserviceslistedmaybetrademarks,servicemarksortradenamesofTerexCorporationand/oritssubsidiariesintheUSAandothercountries.Allrightsarereserved.TerexisaregisteredtrademarkofTerexCorporationintheUSAandmanyothercountries.Copyright2009TerexCorporation.

Height to headshaft centerline

HMS140S 54 ft 3 in (16,530 mm)

HMS200S 62 ft 3 in (18,970 mm)

HMS260S 70 ft 3 in (21,410 mm)

HMS320S 79 ft 0.75 in (24,100 mm)

Conveyor base to headshaft

HMS140S 70 ft 9.25 in (21,580 mm)

HMS200S 81 ft 2.5625 in (24,750 mm)

HMS260S 91 ft 7.875 in (27,940 mm)

HMS320S 103 ft 2.437 in (31,460 mm)

Silo centerline to conveyor end

HMS140S 45 ft 5.875 in (13,870 mm)

HMS200S 52 ft 2 in (15,90 mm)

HMS260S 58 ft 10.5 in (17,950 mm)

HMS320S 66 ft 4.062 in (20,230 mm)

Tank height

HMS140S 26 ft 8.75 in (8,140 mm)

HMS200S 34 ft 8.75 in (10,590 mm)

HMS260S 42 ft 8.75 in (13,020 mm)

HMS320S 50 ft 8.75 in (15,460 mm)

Width between support legs, driveway 13 ft 5.5 in (4,102 mm)

Top of silo to top of slug feeder 5 ft 3.265 in (1,607 mm)

Ground level to bottom of tank 13 ft 2 in (4,013 mm)

Width between support legs, side 10 ft 11.875 in (3,350 mm)

Width between centers of silos 13 ft 9 in (4,191 mm)

operating Dimensions

Pitch

DC130/190/250 4 in (101.6 mm)

DC330 6 in (152 mm)

Rollers

DC130/190/250 1.4375 in (36.5 mm) diam.

DC330 2.75 in (70 mm) diam.

Pins

DC130/190/250 .75 in (19.1 mm)

DC330 1.00 in (25.4 mm)

Side Bars

DC130/190/250 1.75 in (44.5 mm) x .625 in (15.9 mm)

DC330 0.50 in (12.7 mm) x 2.75 in (70 mm)

Flights

DC130/190/250 .375 in (9.5 mm) thick x 6 in (152.4 mm) deep

DC330 0.75 in (19 mm) thick x 8 in (203 mm) deep x 30.5 in (775 mm) deep chrome-moly Wear Alloy-B 360 Brinell hardness

Head Sprocket

DC130/190/250 16 in (406.4 mm) diam. casting with hardened teeth to 55-60 R.E., 4.4875 in (114 mm) diam. shaft, sealed flanged bearings

DC330 26 in (660 mm) diam. Ni-hard steel on 7 in (178 mm) head shaft w/ 5.9 in (151) mm diam. sealed, pillow-block tapered roller bearings

Drag chain

0.25 in. (6 mm) steel plate

Insulation

– Top – 10 in (254 mm) thick

– Side – 5 in (127 mm) thick

– R 17.8 @ 200°F (93°C)

– R 21.7 @ 70°F (21°C)

Silo

Silo Capacities

HMS140S 140 t (127 tonnes)

HMS200S 200 t (181 tonnes)

HMS260S 260 t (236 tonnes)

HMS320S 320 t (290 tonnes)

Silo Weights

At Kingpin

HMS140S 19,200 lb (8,709 kg)

HMS200S 21,300 lb (9,662 kg)

HMS260S 24,500 lb (11,113 kg)

HMS320S 26,500 lb (12,020 kg)

At Axle

HMS140S 34,800 lb (15,785 kg)

HMS200S 37,300 lb (16,919 kg)

HMS260S 38,700 lb (17,554 kg)

HMS320S 43,700 lb (19,822 kg)

Gross

HMS140S 54,000 lb (24,494 kg)

HMS200S 58,500 lb (26,535 kg)

HMS260S 63,200 lb (28,667 kg)

HMS320S 70,200 lb (31,842 kg)

Drag Conveyor Weights

At Kingpin

DC130 9,380 lb (4,255 kg)

DC190 15,440 lb (7,003 kg)

DC250 19,200 lb (8,709 kg)

DC330 42,560 lb (19,305 kg)

At Axle

DC130 34,000 lb (15,422 kg)

DC190 39,100 lb (17,735 kg)

DC250 46,500 lb (21,092 kg)

DC330 54,880 lb (24,893 kg)

Gross

DC130 43,380 lb (19,677 kg)

DC190 54,540 lb (24,739 kg)

DC250 65,700 lb (29,801 kg)

DC330 97,440 lb (44,198 kg)

SpecificationsWeights and capacities

DC130 40-70 hp (30-56 kW)

DC190 50-100 hp (37-75 kW)

DC250 50-100 hp (37-75 kW)

DC330 60-125 hp (45-93 kW)

Motors

TerexRoadbuildingP.O.Box1985,OklahomaCity,OK73101(405)787.60201-888-TEREXRBwww.terexrb.com