hipath 3000 5000 v9 last changes issue 9

Siemens Enterprise Communicationswww.siemens-enterprise.com

DocumentationHiPath 3000/5000 V9Last Changes

Description

A31003-H3590-T100-09-7618

Our Quality and Environmental Management Sys-tems are implemented according to the require-ments of the ISO9001 and ISO14001 standard cer-tified by an external certification company.

Copyright © Siemens Enterprise Communications GmbH & Co. KG, 2012Hofmannstr. 51, 80200 München

Siemens Enterprise Communications GmbH & Co. KG is a Trademark Licensee of Siemens AG

Reference No.: A31003-H3590-T100-09-7618

The information provided in this document contains merely general descriptions or characteristics of performance which in case of actual use do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressly agreed in the terms of contract. Availability and technical specifications are subject to change without notice. OpenScape, OpenStage and HiPath are registered trademarks of Siemens Enterprise Communications GmbH & Co. KG. All other company, brand, product and service names are trademarks or registered trademarks of their respective holders.

Siemens Enterprise Communicationswww.siemens-enterprise.com

h3kv8_ictsTOC.fmContent

Content 0

1 Intention of this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

2 I12779: Callback from EVM menu with the digit 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.1 Entry Voice Mail for HiPath Systems, User Manual, A31003-S2550-B100-2-7619 . . . . . . . . . . . . . . . . . . . . 3

3 Correction of part numbers for IVMP4 and IVMP4R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53.1 HiPath 3000/5000 V9 service manual, A31003-H3590-S100-7-7619 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

4 I13847: Fax is not be sent using E.164 number (HiPath 3000 with OSO V3 R2.2.0), I13396: E.164 does not work with 2 digits as route prefix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.1 Configuration examples HiPath 3000/5000 V9, A31003-H3590-M102-7-7619 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

5 I13788: List of supported countries for Silent Reversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275.1 Manager E, HiPath 3000/5000 V9,

A31003-H3590-M100-7-7619 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 275.2 Feature Description, HiPath 3000/5000 V9,

A31003-H3590-F100-7-7619 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

A31003-H3590-T100-09-7618, 09/2012HiPath 3000/5000 V9, Last Changes, Description I

Content Nur für den internen Gebrauch

h3kv8_ictsTOC.fm

A31003-H3590-T100-09-7618, 09/2012II HiPath 3000/5000 V9, Last Changes, Description

introduction_z01.fm

Nur für den internen Gebrauch Intention of this document

1 Intention of this document

Overview

The document "Last Changes" consists of changes for the service documentation and the user manuals of the HiPath 3000/5000 V9. These changes were indicated after editorial deadline; therefore, they could’nt be inserted into the current documents. These changes will be inserted into the following releases.

Marks

In the changed sections of the related books you see the following marks:

● New created texts are highlighted in red.

● Deleted texts are highlighted in blue and crossed out.

A31003-H3590-T100-09-7618, 09/2012HiPath 3000/5000 V9, Last Changes, Description 1

Intention of this document Nur für den internen Gebrauch

introduction_z01.fm

A31003-H3590-T100-09-7618, 09/20122 HiPath 3000/5000 V9, Last Changes, Description

I12779_HP_EntryVoiceMail_z33.fm

I12779: Callback from EVM menu with the digit 8Entry Voice Mail for HiPath Systems, User Manual, A31003-S2550-B100-2-7619

2 I12779: Callback from EVM menu with the digit 8

2.1 Entry Voice Mail for HiPath Systems, User Manual, A31003-S2550-B100-2-7619

Mailbox/Message Retrieval

14 Modified: Section "Mailbox/Message Retrieval" in the User Manual, A31003-S2550-B100-2-7619, 09/2005

1 Enter the code to go back to the previous message/function

2 Enter the code to replay the last retrieved message

8 Enter the code while listening to a retrieved message to initiate a call to the sen-der of the message.

0 0 Enter the code to delete the last retrieved message.Once you have pressed 0, you must confirm the deletion by pressing 0 again


I12779: Callback from EVM menu with the digit 8 Nur für den internen Gebrauch

I12779_HP_EntryVoiceMail_z33.fm

Entry Voice Mail for HiPath Systems, User Manual, A31003-S2550-B100-2-7619


SachnummernIVMP4undIVMP4R_ZN_07.fm

Correction of part numbers for IVMP4 and IVMP4RHiPath 3000/5000 V9 service manual, A31003-H3590-S100-7-7619

3 Correction of part numbers for IVMP4 and IVMP4R

3.1 HiPath 3000/5000 V9 service manual, A31003-H3590-S100-7-7619

3.1 Functional and model overview of the boards

Functional overview of all boards used

3-33-106

Changed: 3.1 Functional and model overview of the boardsChanged: 3.3.6 IVMP4, IVMP4R

Table 3-1 HiPath 3000 - Functional Overview of All Boards Used

Board Part number Model

Central Board

CBCC S30810-Q2935-A401 HiPath 3550/HiPath 3350

CBRC S30810-Q2935-Z301 HiPath 3500/HiPath 3300

CBSAP S30810-Q2314-X HiPath 3800

CMA S30807-Q6931-X HiPath 3550/HiPath 3350/HiPath 3500/HiPath 3300

CMS S30807-Q6928-X HiPath 3000

CUC S30777-Q750-X HiPath 3550

CUCR S30777-Q750-Z HiPath 3500

CUP S30777-Q751-X HiPath 3350

CUPR S30777-Q751-Z HiPath 3300

DBSAP S30807-Q6722-X HiPath 3800

IMODN S30807-Q6932-X100 HiPath 3000

LIM S30807-Q6930-X HiPath 3000

LIMS S30807-Q6721-X HiPath 3800

LUNA2 S30122-K7686-A1 S30122-K7686-M1

HiPath 3800

MMC S30122-X8002-X10 HiPath 3000

PSUP S30122-K5658-M HiPath 3350

RGMOD S30124-X5109-X HiPath 3800 (for selected countries only)


Correction of part numbers for IVMP4 and IVMP4R Nur für den internen Gebrauch


HiPath 3000/5000 V9 service manual, A31003-H3590-S100-7-7619

UPSC-D S30122-K5660-A300S30122-K5660-M300

HiPath 3550/HiPath 3350

UPSC-DR S30122-K7373-A900S30122-K7373-M900

HiPath 3500/HiPath 3300






Peripheral boardsNote: The HiPath 3550, HiPath 3350, HiPath 3500 and HiPath 3300 peripheral boards must be firmly inserted into their slots; otherwise contact problems can cause board failure.

16SLA S30810-Q2923-X HiPath 3550/HiPath 3350 (not for U.S.)

4SLA S30810-Q2923-X200 HiPath 3550/HiPath 3350 (not for U.S.)

8SLA S30810-Q2923-X100 HiPath 3550/HiPath 3350

8SLAR S30810-K2925-Z HiPath 3500/HiPath 3300

DIU2U S30810-Q2216-X HiPath 3800 (for U.S. only)

DIUN2 S30810-Q2196-X HiPath 3800

DIUT2 S30810-Q2226-X100 HiPath 3800

HXGR3 S30810-K2943-Z HiPath 3500/HiPath 3300

HXGS3 S30810-Q2943-X HiPath 3550/HiPath 3350

HXGS3 S30810-Q2943-X1 HiPath 3550/HiPath 3350

HXGS3 S30810-K2943-Z1 HiPath 3500/HiPath 3300

IVMN8 S30122-H7688-X100 HiPath 3800

IVMNL S30122-H7688-X HiPath 3800

IVMP4 S30122-Q7721-X HiPath 3550/HiPath 3350

IVMP4R S30122-K7721-X HiPath 3500/HiPath 3300

IVMP8 S30122-Q7379-X100 HiPath 3350 (not for U.S.)

IVMP8R S30122-K7379-Z100 HiPath 3300 (not for U.S.)

IVMS8 S30122-Q7379-X HiPath 3550/HiPath 3350

IVMS8R S30122-K7379-Z HiPath 3500/HiPath 3300

SLA16N S30810-Q2929-X100 HiPath 3550

SLA24N S30810-Q2929-X HiPath 3550

SLAD4 S30810-H2956-X100 HiPath 3550/HiPath 3350

SLAD8 S30810-H2956-X200 HiPath 3550/HiPath 3350

SLAD8R S30810-K2956-X300 HiPath 3500/HiPath 3300

SLAD16 S30810-Q2957-X HiPath 3550/HiPath 3350

SLC16N S30810-Q2193-X100 HiPath 3550 (not for U.S.)

SLCN S30810-Q2193-X300 HiPath 3800 (not for U.S.)

SLMA S30810-Q2191-C300 HiPath 3800







SLMA2 S30810-Q2246-X HiPath 3800(for selected countries only)

SLMA8 S30810-Q2191-C100 HiPath 3800

SLMAE S30810-Q2225-X200 HiPath 3800

SLMAE8 S30810-Q2225-X100 HiPath 3800

SLMAV8 S30810-Q2227-X100 HiPath 3800

SLMAV24 S30810-Q2227-X200 HiPath 3800

SLMO2 S30810-Q2168-X10 HiPath 3800

SLMO24 S30810-Q2901-X HiPath 3550

SLMO8 S30810-Q2168-X100 HiPath 3800

SLU8 S30817-Q922-A301 HiPath 3550/HiPath 3350

SLU8R S30817-K922-Z301 HiPath 3550/HiPath 3300

STLS2 S30817-Q924-B313 HiPath 3550/HiPath 3350 (not for U.S.)

STLS4 S30817-Q924-A313 HiPath 3550/HiPath 3350

STLS4R S30817-K924-Z313 HiPath 3500/HiPath 3300

STLSX2 S30810-Q2944-X100 HiPath 3550/HiPath 3350

STLSX4 S30810-Q2944-X HiPath 3550/HiPath 3350

STLSX4R S30810-K2944-Z HiPath 3500/HiPath 3300

STMD3 S30810-Q2217-X10 HiPath 3800

STMI2 S30810-Q2316-X100 HiPath 3800

TCAS-2 S30810-Q2945-X HiPath 3550(for selected countries only)

TCASR-2 S30810-K2945-X HiPath 3500(for selected countries only)

TLA2 S30817-Q923-Bxxx HiPath 3550/HiPath 3350 (not for U.S.)

TLA4 S30817-Q923-Axxx HiPath 3550/HiPath 3350 (not for U.S.)

TLA4R S30817-Q923-Zxxx HiPath 3550/HiPath 3300 (not for U.S.)

TLA8 S30817-Q926-Axxx HiPath 3550/HiPath 3350 (not for U.S.)

TLANI2 S30810-H2953-X1xx HiPath 3550/HiPath 3350

TLANI4 S30810-H2953-Xxx HiPath 3550/HiPath 3350

TLANI8 S30810-H2954-X1xx HiPath 3550/HiPath 3350

TLANI4R S30810-K2953-X2xx HiPath 3500/HiPath 3300

TM2LP S30810-Q2159-Xxxx HiPath 3800






TMANI S30810-Q2327-X HiPath 3800

TMANI-IM S30810-Q2327-X1 HiPath 3800

TMANI-BRA S30810-Q2327-X82 HiPath 3800

TMC16 S30810-Q2485-X HiPath 3800(for selected countries only)

TMCAS S30810-Q2938-X HiPath 3550(for selected countries only)

T MCAS-2 S30810-Q2946-X HiPath 3800(for selected countries only)

TMDID S30810-Q2452-X HiPath 3800 (for U.S. only)

TMDID2 S30810-Q2197-T HiPath 3800(for selected countries only)

TMEW2 S30810-Q2292-X100 HiPath 3800

TMGL4 S30810-Q2918-X HiPath 3550/HiPath 3350 (for U.S. only)

TMGL4R S30810-K2918-Z HiPath 3500/HiPath 3300 (for U.S. only)

TMQ4 S30810-Q2917-X HiPath 3550/HiPath 3350 (for U.S. only)

TS2N (old: TS2) S30810-Q2913-X300 HiPath 3550 (not for U.S.)

TS2R S30810-K2913-Z300 HiPath 3500 (not for U.S.)

TST1 S30810-Q2919-XS30810-K2919-Z

HiPath 3550 (for U.S. only)HiPath 3500 (for U.S. only)







Options

ALUM4 S30817-Q935-A HiPath 3550/HiPath 3350

ANI4 S30807-Q6917-Axxx HiPath 3550/HiPath 3350 (for selected countries only)

ANI4R S30807-Q6917-Z103 HiPath 3500/HiPath 3300 (for selected countries only)

EVM S30807-Q6945-X HiPath 3550/HiPath 3350/HiPath 3500/Hi-Path 3300

EXM S30817-Q902-B401 HiPath 3550/HiPath 3350

EXMNA S30817-Q6923-X HiPath 3550/HiPath 3350 (for U.S. only)

EXMR S30122-K7403-Z HiPath 3500/HiPath 3300

GEE12 S30817-Q951-Axxx HiPath 3550/HiPath 3350 (not for U.S.)



HOPE S30122-Q7078-XS30122-Q7079-X

HiPath 3550/HiPath 3350 (for U.S. only)

MPPI (Product of

BEYERTONE GmbH)

S30122-K5380-X200 HiPath 3550/HiPath 3350 (not for U.S.)

MPPI (Product of

BEYERTONE GmbH)

S30122-K7275-B HiPath 3000

OPAL C39195-A7001-B130 HiPath 3550/HiPath 3350

OPALR C39195-A7001-B142 HiPath 3500/HiPath 3300

PFT1/PFT4 S30777-Q539-XS30777-Q540-X

HiPath 3800 (not for U.S.)

PDM1 S30807-Q5692-X100 HiPath 3550/HiPath 3350/HiPath 3500/Hi-Path 3300

REALS S30807-Q6629-X HiPath 3800

STBG4 S30817-Q934-A HiPath 3550/HiPath 3350 (France only)

STRB S30817-Q932-A HiPath 3550/HiPath 3350

STRBR S30817-Q932-Z HiPath 3500/HiPath 3300

UAM S30122-X7217-X HiPath 3550/HiPath 3350 (not for U.S.)

UAMR S30122-X7402-Z HiPath 3500/HiPath 3300 (not for U.S.)






V24/1 S30807-Q6916-X100 HiPath 3550/HiPath 3350 (not for U.S.)







Overview of all board models used

Table 3-2 HiPath 3000 - Overview of All Boards Models Used

Board Part number FunctionHiPath 3800 AMOM S30807-K5480-Xxxx Opto-electronic converterCBSAP S30810-Q2314-X Central boardCMS S30807-Q6928-X Central boardDBSAP S30807-Q6722-X Central boardDIU2U S30810-Q2216-X Peripheral board (for U.S. only)DIUN2 S30810-Q2196-X Peripheral boardDIUT2 S30810-Q2226-X100 Peripheral boardIMODN S30807-Q6932-X100 Central boardIVMN8 S30122-H7688-X100 Peripheral boardIVMNL S30122-H7688-X Peripheral boardLIMS S30807-Q6721-X Central boardLUNA2 S30122-K7686-A1

S30122-K7686-M1 Central board

MMC S30122-X8002-X10 Central board MPPI (Product of

BEYERTONE GmbH)

S30122-K7275-B Option

PFT1/PFT4 S30777-Q539-XS30777-Q540-X

Option (not for U.S.)

REALS S30807-Q6629-X Option RGMOD S30124-X5109-X Central board (for selected countries

only) SLCN S30810-Q2193-X300 Peripheral board (not for U.S.) SLMA S30810-Q2191-C300 Peripheral boardSLMA2 S30810-Q2246-X Peripheral board (for selected countries

only) SLMA8 S30810-Q2191-C100 Peripheral boardSLMAE S30810-Q2225-X200 Peripheral board SLMAE8 S30810-Q2225-X100 Peripheral board SLMAV8 S30810-Q2227-X100 Peripheral boardSLMAV24 S30810-Q2227-X200 Peripheral boardSLMO2 S30810-Q2168-X10 Peripheral boardSLMO8 S30810-Q2168-X100 Peripheral board




STMD3 S30810-Q2217-X10 Peripheral boardSTMI2 S30810-Q2316-X100 Peripheral boardTM2LP S30810-Q2159-Xxxx Peripheral boardTMC16 S30810-Q2485-X Peripheral board (for selected countries

only)T MCAS-2 S30810-Q2946-X Peripheral board (for selected countries

only)TMDID S30810-Q2452-X Peripheral board (for U.S. only)TMDID2 S30810-Q2197-T Peripheral board (for selected countries

only) TMEW2 S30810-Q2292-X100 Peripheral boardTMANI S30810-Q2327-X Peripheral boardTMANI-IM S30810-Q2327-X1 Peripheral boardTMANI-BRA S30810-Q2327-X82 Peripheral board


Board Part number Function





HiPath 3550Note: The HiPath 3550, HiPath 3350, HiPath 3500 and HiPath 3300 peripheral boards must be firmly inserted into their slots; otherwise contact problems can cause board failure.ALUM4 S30817-Q935-A OptionANI4 S30807-Q6917-Axxx Option (for selected countries only)CBCC S30810-Q2935-A401 Central boardCMA S30807-Q6931-X Central boardCMS S30807-Q6928-X Central boardCUC S30777-Q750-X Central boardEVM S30807-Q6945-X OptionEXM S30817-Q902-B401 OptionEXMNA S30817-Q6923-X Option (for U.S. only)GEE12 S30817-Q951-Axxx Option (not for U.S.) GEE16 S30817-Q951-Axxx Option (not for U.S.) GEE50 S30817-Q951-Axxx Option (not for U.S.) HOPE S30122-Q7078-X

S30122-Q7079-XOption (for U.S. only)

HXGS3 S30810-Q2943-X Peripheral boardHXGS3 S30810-Q2943-X1 Peripheral boardIMODN S30807-Q6932-X100 Central boardIVMP4 S30122-Q7721-X Peripheral boardIVMS8 S30122-Q7379-X Peripheral boardLIM S30807-Q6930-X Central boardMMC S30122-X8002-X10 Central boardMPPI (Product of

BEYERTONE GmbH)

S30122-K5380-X200 (not for U.S.) S30122-K7275-B

Option

OPAL C39195-A7001-B130 Cable PDM1 S30807-Q5692-X100 OptionSLA8N S30810-Q2929-X200 Peripheral board (not for U.S.) SLA16N S30810-Q2929-X100 Peripheral boardSLAD4 S30810-H2956-X100 Peripheral boardSLAD8 S30810-H2956-X200 Peripheral boardSLAD16 S30810-Q2957-X Peripheral boardSLA24N S30810-Q2929-X Peripheral board






SLC16N S30810-Q2193-X100 Peripheral board (not for U.S.) SLMO24 S30810-Q2901-X Peripheral boardSLU8 S30817-Q922-A301 Peripheral boardSTBG4 S30817-Q934-A Option (France only)STLS2 S30817-Q924-B313 Peripheral board (not for U.S.) STLS4 S30817-Q924-A313 Peripheral boardSTLSX2 S30810-Q2944-X100 Peripheral boardSTLSX4 S30810-Q2944-X Peripheral boardSTRB S30817-Q932-A OptionTCAS-2 S30810-Q2945-X Peripheral board (for selected countries

only) TLA2 S30817-Q923-Bxxx Peripheral board (not for U.S.) TLA4 S30817-Q923-Axxx Peripheral board (not for U.S.) TLA8 S30817-Q926-Axxx Peripheral board (not for U.S.) TLANI2 S30810-H2953-X1xx Peripheral boardTLANI4 S30810-H2953-Xxx Peripheral boardTLANI8 S30810-H2954-X1xx Peripheral boardTMAMF S30810-Q2587-A400 Peripheral board (for selected countries

only)TMCAS S30810-Q2938-X Peripheral board (for selected countries

only)TMGL4 S30810-Q2918-X Peripheral board (for U.S. only)TMQ4 S30810-Q2917-X Peripheral board (for U.S. only)TST1 S30810-Q2919-X Peripheral board (for U.S. only)TS2N (old: TS2) S30810-Q2913-X300 Peripheral board (not for U.S.) UAM S30122-X7217-X Option (not for U.S.) UPSC-D S30122-K5660-A300

S30122-K5660-M300Central board

V24/1 S30807-Q6916-X100 Option (not for U.S.) 4SLA S30810-Q2923-X200 Peripheral board (not for U.S.) 8SLA S30810-Q2923-X100 Peripheral board16SLA S30810-Q2923-X Peripheral board (not for U.S.)







HiPath 3350Note: The HiPath 3550, HiPath 3350, HiPath 3500 and HiPath 3300 peripheral boards must be firmly inserted into their slots; otherwise contact problems can cause board failure. ALUM4 S30817-Q935-A OptionANI4 S30807-Q6917-Axxx Option (for selected countries only)CBCC S30810-Q2935-A401 Central boardCMA S30807-Q6931-X Central boardCMS S30807-Q6928-X Central boardCUP S30777-Q751-X Central boardEVM S30807-Q6945-X OptionEXM S30817-Q902-B401 OptionEXMNA S30817-Q6923-X Option (for U.S. only)GEE12 S30817-Q951-Axxx Option (not for U.S.) GEE16 S30817-Q951-Axxx Option (not for U.S.) GEE50 S30817-Q951-Axxx Option (not for U.S.) HOPE S30122-Q7078-X

S30122-Q7079-XOption (for U.S. only)

HXGS3 S30810-Q2943-X Peripheral boardHXGS3 S30810-Q2943-X1 Peripheral boardIMODN S30807-Q6932-X100 Central boardIVMP4 S30122-Q7721-X Peripheral boardIVMP8 S30122-Q7379-X100 Peripheral board (not for U.S.) IVMS8 S30122-Q7379-X Peripheral boardLIM S30807-Q6930-X Central boardMMC S30122-X8002-X10 Central boardMPPI (Product of

BEYERTONE GmbH)

S30122-K5380-X200 (not for U.S.) S30122-K7275-B

Option

OPAL C39195-A7001-B130 CablePDM1 S30807-Q5692-X100 OptionPSUP S30122-K5658-M Central boardSLAD4 S30810-H2956-X100 Peripheral boardSLAD8 S30810-H2956-X200 Peripheral boardSLAD16 S30810-Q2957-X Peripheral boardSLU8 S30817-Q922-A301 Peripheral board






STBG4 S30817-Q934-A Option (France only)STLS2 S30817-Q924-B313 Peripheral board (not for U.S.) STLS4 S30817-Q924-A313 Peripheral boardSTLSX2 S30810-Q2944-X100 Peripheral boardSTLSX4 S30810-Q2944-X Peripheral boardSTRB S30817-Q932-A OptionTLA2 S30817-Q923-Bxxx Peripheral board (not for U.S.) TLA4 S30817-Q923-Axxx Peripheral board (not for U.S.) TLA8 S30817-Q926-Axxx Peripheral board (not for U.S.) TLANI2 S30810-H2953-X1xx Peripheral boardTLANI4 S30810-H2953-Xxx Peripheral boardTLANI8 S30810-H2954-X1xx Peripheral boardTMGL4 S30810-Q2918-X Peripheral board (for U.S. only)TMQ4 S30810-Q2917-X Peripheral board (for U.S. only)UAM S30122-X7217-X Option (not for U.S.) UPSC-D S30122-K5660-A300


V24/1 S30807-Q6916-X100 Option (not for U.S.) 4SLA S30810-Q2923-X200 Peripheral board (not for U.S.) 8SLA S30810-Q2923-X100 Peripheral board16SLA S30810-Q2923-X Peripheral board (not for U.S.)







HiPath 3500Note: The HiPath 3550, HiPath 3350, HiPath 3500 and HiPath 3300 peripheral boards must be firmly inserted into their slots; otherwise contact problems can cause board failure.ANI4R S30807-Q6917-Z103 Option (for selected countries only)CBRC S30810-Q2935-Z401 Central boardCMA S30807-Q6931-X Central boardCMS S30807-Q6928-X Central boardCUCR S30777-Q750-Z Central boardEVM S30807-Q6945-X OptionEXMR S30122-K7403-Z OptionHXGR3 S30810-K2943-Z Peripheral boardIMODN S30807-Q6932-X100 Central boardIVMP4R S30122-K7721-X Peripheral boardIVMS8R S30122-K7379-Z Peripheral boardLIM S30807-Q6930-X Central boardMMC S30122-X8002-X10 Central boardMPPI (Product of

BEYERTONE GmbH)


OPALR C39195-A7001-B142 Cable PDM1 S30807-Q5692-X100 OptionSLAD8R S30810-K2956-X300 Peripheral boardSLU8R S30817-K922-Z301 Peripheral boardSTLS4R S30817-K924-Z313 Peripheral boardSTLSX4R S30810-K2944-Z Peripheral boardSTRBR S30817-Q932-Z OptionTCASR-2 S30810-K2945-X Peripheral board (for selected countries

only) TLA4R S30817-Q923-Zxxx Peripheral board (not for U.S.) TLANI4R S30810-K2953-X2xx Peripheral boardTMGL4R S30810-K2918-Z Peripheral board (for U.S. only)TST1 S30810-K2919-Z Peripheral board (for U.S. only)TS2R S30810-K2913-Z300 Peripheral board (not for U.S.) UAMR S30122-X7402-Z Option (not for U.S.) UPSC-DR S30122-K7373-A900







8SLAR S30810-K2925-Z Peripheral board







HiPath 3300Note: The HiPath 3550, HiPath 3350, HiPath 3500 and HiPath 3300 peripheral boards must be firmly inserted into their slots; otherwise contact problems can cause board failure. 8SLAR S30810-K2925-Z Peripheral boardANI4R S30807-Q6917-Z103 Option (for selected countries only)CBRC S30810-Q2935-Z401 Central board CMA S30807-Q6931-X Central boardCMS S30807-Q6928-X Central boardCUPR S30777-Q751-Z Central boardEVM S30807-Q6945-X OptionEXMR S30122-K7403-Z OptionHXGR3 S30810-K2943-Z Peripheral boardIMODN S30807-Q6932-X100 Central boardIVMP4R S30122-K7721-X Peripheral boardIVMP8R S30122-K7379-Z100 Peripheral board (not for U.S.) IVMS8R S30122-K7379-Z Peripheral boardLIM S30807-Q6930-X Central boardMMC S30122-X8002-X10 Central boardMPPI (Product of

BEYERTONE GmbH)


OPALR C39195-A7001-B142 Cable PDM1 S30807-Q5692-X100 OptionSLAD8R S30810-K2956-X300 Peripheral boardSLU8R S30817-K922-Z301 Peripheral boardSTLS4R S30817-K924-Z313 Peripheral boardSTLSX4R S30810-K2944-Z Peripheral boardSTRBR S30817-Q932-Z OptionTLA4R S30817-Q923-Zxxx Peripheral board (not for U.S.) TLANI4R S30810-K2953-X2xx Peripheral boardTMGL4R S30810-K2918-Z Peripheral board (for U.S. only)UAMR S30122-X7402-Z Option (not for U.S.) UPSC-DR S30122-K7373-A900







3.3.6 IVMP4, IVMP4R

Introduction

The following boards are used for the integrated voice mail functionality in HiPath Xpressions Compact in V2.5 and later:

● IVMP4 (Integrated Voice Mail Point) S30122-Q7004-X13S30122-Q7721-X: für HiPath 3550 and HiPath 3350 (wall housing)

Bild 3-1 IVMP4

● IVMP4R (Integrated Voice Mail Point Rack) S30122-K7004-Z13S30122-K7721-X: für Hi-Path 3500 and HiPath 3300 (19-inch housing)

Figure 3-2 IVMP4R





Up to 30 mailboxes are available with a total storage capacity of four hours. The boards can also be used for Music on Hold and announcements.

Optional administration of HiPath Xpressions Compact is also possible via the board’s Ethernet (10/100BaseT) interface.

For detailed information on HiPath Xpressions Compact, startup and administration, see the manual for the product.

Switches and LEDs

> HiPath Xpressions Compact supports a central voice mail functionality in a HiPath 3000/5000 network. All stations can use the central voice mail server. HiPath Xpressions Compact may be used as a central announcement device in a network system with V6.0 SMR-06 or later.

> Only one IVMP4 or IVMP4R may be installed per system. For thermal reasons, the IVMP4 board may only be used in slots 5, 7, and 9 (lower slots) in HiPath 3550 (wall housing).Only slot 5 can be used for the IVMP4 board in HiPath 3350 (wall housing).

Figure 3-3 IVMP4, IVMP4R

2

50

X1 = con-nection to CUC/CUCR/CUP/CUPR

Lockout switch

LED (green)LED (yellow)

X410

2

X3 = LAN connector, 8-pin RJ45jack

X3

X1




Lockout switch settings

● Pressed = free (default)

● Not pressed = locked: existing connections remain active, new connections are locked.

– The yellow LED lights up when all connections are ended and the board is effectively locked.

– The yellow LED flashes when a lockout request is entered (via lockout switch or soft-ware) but at least one call is still active.

To reset the board to the default state, activate the lockout switch twice within the first 10 s of board startup.

Assignment of the RJ45 jack X3

The Ethernet (10/100BaseT) interface is accessed via the 8-pin RJ45 jack X3.

RJ45 Jack X3Pin

Signal Description

1 Tx + Transmit +

2 Tx – Transmit –

3 Rx + Receive +

4 – Not used

5 – Not used

6 Rx – Receive –

7 – Not used

8 – Not used

Table 3-3 IVMP4, IVMP4R - Assignment of the RJ45 Jack X3 (LAN Connector)





LED statuses and their meanings

LEDyellow

LEDgreen

Meaning Action

During Startup and Initialization

Off Off 1 Boot procedure (lasts approx. 60 s)

On On 2 LED test (lasts approx. 10 s)

On Off 3 Lockout switch state signaling by yellow LED (lasts approx. 5 s): ● blocked = On● free = Off

Possibly check if board was de-activated using HiPath 3000/5000 Manager E or lockout switch.

Off

Flashing (500/

500 ms)

Off 4 Hard disk test, application startup (depending on hard disk status, lasts approx. 2 - 9 minutes)

Off On 5a Standby mode after successful boot

On Off 5b Board locked or board error oc-curred

Check whether board was deac-tivated using HiPath 3000/5000 Manager E or lockout switch. Change board if faulty.

During Operation

Off On Idle (no call)

Flashing (500/

500 ms)

Off At least one active port (call)

Flashing (500/

500 ms)

Flashing (500/

500 ms)

Lockout switch activated during a call

On Off Board locked or board error occurred Check whether board was deac-tivated using HiPath 3000/5000 Manager E or lockout switch.Change board if faulty.

Flashing (100/

100 ms)

Off Upgrade process active

Table 3-4 IVMP4, IVMP4R - LED Statuses


I13847_I13396_ZN01_ZN05.fm

I13847: Fax is not be sent using E.164 number (HiPath 3000 with OSO V3 R2.2.0), I13396: Configuration examples HiPath 3000/5000 V9, A31003-H3590-M102-7-7619

4 I13847: Fax is not be sent using E.164 number (HiPath 3000 with OSO V3 R2.2.0), I13396: E.164 does not work with 2 digits as route prefix

4.1 Configuration examples HiPath 3000/5000 V9, A31003-H3590-M102-7-7619

4.19.1 Gateway Node (Node with direct CO access)

1. "E164 numbering scheme" system-wide flag is activated.

2. Country code is always filled at CO route.

3. Location number is set at this route.

4. International prefix should always be filled-in.

5. Following pairs of LCR rules are needed:

● 0CZ LCR dial plan with Dialing Rule: A and Route: CO

● 0C00[Country code]-Z LCR dial plan with Dialing Rule: D[National prefix]E3A and Route: CO

6. Numbering Plan: System check

7. CO route: Route prefix: 0

8. Networking Route: Route prefix: -

9. Networking Route: 2nd trunk code: 0

10. OSO Route: Route prefix: -

11. OSO Route: 2nd trunk code: 0

4-1424-142

Changed: 4.19.1 Gateway Node (Node with direct CO access)Changed: 4.19.2 Sub node (Node without direct CO access)

> Any single digit number can be used as LCR access code. The same digit should be applied to the CO route prefix and the 2nd trunk code of the networking route.


I13847: Fax is not be sent using E.164 number (HiPath 3000 with OSO V3 R2.2.0), I13396:

I13847_I13396_ZN01_ZN05.fm

Configuration examples HiPath 3000/5000 V9, A31003-H3590-M102-7-7619

4.19.2 Sub node (Node without direct CO access)

1. "E164 numbering scheme" system-wide flag is activated.

2. Country code is always filled-in at CO route (although no CO trunks are available).

3. Location number flag is set at this route.

4. International prefix should always be filled-in.

5. Following pairs of LCR rules are needed:

● 0CZ LCR dial plan with Dialing Rule: E1A and Route: Networking

● 0C00[Country code]-Z LCR dial plan with Dialing Rule: E1A and Route: Networking

6. Numbering Plan: System check

7. CO route: Route prefix: 0

8. Networking Route: Route prefix: -

9. Networking Route: 2nd trunk code: 0

10. OSO Route: Route prefix: -

11. OSO Route: 2nd trunk code: 0

> Any single digit number can be used as LCR access code. The same digit should be applied to the CO route prefix and the 2nd trunk code of the networking route.


I13788_SilentReversalCountries_ZN_04.fm

I13788: List of supported countries for Silent ReversalManager E, HiPath 3000/5000 V9, A31003-H3590-M100-7-7619

5 I13788: List of supported countries for Silent Reversal

5.1 Manager E, HiPath 3000/5000 V9, A31003-H3590-M100-7-7619

9.4.4.6 Area: Station flags

......

Silent-Reversal flag (not in the USA)

Silent reversal on MSI trunk at call start and end via the central office for precise call detail re-cording. Is required only in the following countries: AUS, CHN, IND, MAL, PHI, THA, SIN, IDS, IM (Vietnam, Hong Kong, Myanmar). Is supported in the following countries: Argentina, Turkey, Brasil, India, Australia, Singapore, Malaysia, Thailand, New Zealand, Taiwan, Korea, China, In-donesia, Philippines, Spain, United Kingdom.

For IM countries with silent reversal, the silent reversal debounce timer in the MSI port tem-plates is not set as the default and must be set to 200 ms.

.....

9-65 Changed: 9.4.4.6 Area: Station flags


I13788: List of supported countries for Silent Reversal Nur für den internen Gebrauch

I13788_SilentReversalCountries_ZN_04.fm

Feature Description, HiPath 3000/5000 V9, A31003-H3590-F100-7-7619

5.2 Feature Description, HiPath 3000/5000 V9, A31003-H3590-F100-7-7619

12.1 Silent Reversal at Start and End of Call

Implementing features, see also Manager E Silent Reversal at Start and End of Call

Definition

Many countries use silent reversal to mark the beginning and end of outgoing calls on loop start trunks. These criteria are used for time recording within central call detail recording. This is par-ticularly important when exact tracking of call charges is required (as in a hotel).

The feature can be configured per circuit.

Model-Specific Data

Dependencies/Restrictions

12-1 Changed: 12.1 Silent Reversal am Gesprächsbeginn und bei Gesprächsende

Subject HiPath 3800 HiPath 3550HiPath 3500

HiPath 3350HiPath 3300

Feature available in x x x

Hardware requirements TM2LP TLA2/4/8 + GEE12TLA4R

Software requirements V5.0 or later V1.0 or later V1.0 or later

General requirements Loop start trunk

Subject Dependency/Restriction

Silent Reversal In countries where silent reversal is not signaled at the end of a call, the call duration is determined by the calling party hanging up the phone.

Supported countries Silent Reversal is supported in the following countries: Argentina, Turkey, Brasil, India, Australia, Singapore, Malaysia, Thailand, New Zealand, Taiwan, Korea, China, Indonesia, Philippines, Spain, Unit-ed Kingdom.


hipath 3000 5000 v9 last changes issue 9

Documents

hipath systems

number hipath

v9 service manual

configuration examples

document nur fr den

document1 intention

evm menu

documentoverviewthe