hindu institute of technology, sonepathitsonepat.org/wp-content/uploads/2019/02/mandatory... ·...
TRANSCRIPT
1
MANDATORY DISCLOSURE
I. NAME OF THE INSTITUTION
Hindu Institute of Technology, Industrial area, Near Cygnus J.K. Hindu Hospital, Sonepat-131001(Haryana) Phone No.- 0130- 2212156, 2212957, 9467282393 E-Mail Address: [email protected]
II. NAME AND ADDRESS OF THE TRUST/SOCIETY
The Sonepat Hindu Educational & Charitable Society,
Hindu Vidyapeeth, Kath Mandi,
Sonepat
III. NAME AND ADDRESS OF THE DIRECTOR
Mr. Gulshan Singla
Hindu Institute of Technology, Industrial Area, Sonepat-131001(Haryana)
Phone No.(Off)- 0130- 2212156, 2212957
Phone No.(Resi)- 9416306251
E-Mail Address: [email protected]
IV. NAME OF THE AFFILIATING BOARD/UNIVERSITY
State Board of Technical Education, Haryana and Approved by AICTE
(ALL INDIA COUNCIL FOR TECHNICAL EDUCATION), New Delhi
3
V. GOVERNANCE
Members of the Board and Advisory Academic Body and their Background:-
Frequency of the Board Meetings and Academic Advisory Body- 3 to 6 Months
Organizational Chart and Process
NAME AND ADDRESS OF THE MEMBERS OF THE GOVERNING BODY AS PER THE COMPOSITION
PRESCRIBED BY AICTE(Society)
S. No
Name
Position
Qualifi-
cation
Present Professiona
l position/ Occupation
Telephone
Numbers
Address
01
Pawan
Kumar
Gupta
President Graduate Business Man 09896276778 -do- M/s Durga Parsad
Kanwal Singh,34 Anaj
Mandi,Sonepat
02 Mr. Ashok
Garg
Secretary Graduate Business Man 09215338590 -do- H.No.65,Sector-
15,Sonepat
03
Mr. Jai
Kanwar Jain
Tearsurer 10+2 Business Man 9416013089 -do- H.no. 283/24,Kiran
Bhawan,Tirth
Market,Sonepat
VI. PROGRAMMES
Name of the Programmes approved by the AICTE
Computer Engineering
Electrical Engineering
Electronics & Communication Engineering
Civil Engineering
Mechanical Engineering
Name of the Programmes accredited by the AICTE
NIL
Details of each Program
Sr. No Courses No. of Duration Fee
Seats (Yearly)
1 Electrical Engg. 60 3 Years 31,990/-
2 Computer Engg. 60 3 Years 31,990/-
3 Electronics & Comm. 60 3 Years 31,990/-
Engg.
4 Civil Engg. 60 3 Years 31,990/-
5 Mechanical Engg. 60 3 Years 31,990/-
4
Note : 10% extra seats will be added for drop out candidates.
VII. Nature and Extent of Involvement of Faculty and Students in Academic affairs/Improvements The Faculty is fully involved in daily academic activities of students like Providing extra time for their problems, Identifying lagging students and special attention for them, Class tests, Viva’s , Presentations using Multimedia Projectors, Quiz’s.
Student Feedback on Institutional Governance/ Faculty Performance
This is the routine process of the Institution.
5
VIII. PROFILE OF DIRECTOR/PRINCIPAL WITH QUALIFICATIONS, TOTAL
EXPERIENCE, AGE AND DURATION OF EMPLOYMENT AT THE
INSTITUTE CONCERNED
Phone No.(Off)- 0130- 2212156, 2212957
Phone No.(Resi)- 9416306251
E-Mail Address: [email protected], [email protected]
BIO DATA
Objective:
I look forward to build my career with Hard Work, Dedication and Devotion to assign job in the field of Administration and teaching.
Work Experience:
Presently working as Principal at Hindu Institute of Technology (HIT), Sonepat.
19 monthnExperience as Principal at B.M. Institute of Polytechnic (Jagdishpur) from
May 2011-DEC 2012 .
09 month Experience as Principal at Modish Institute of Polytechnic (MIP) Punhana (Mewat) from Aug.2010 – April 2011.
22 month Experience as Principal at L.R. Institute of technology and Management(LRITM) Deeghot (Palwal) from Oct.2008 –July 2010
5 month Experience as an Asstt. Professor at N.C.College of Engg., Israna (Panipat) from June 2008-Oct. 2008.
8 months Experience as Sr. Lecturer at N.C.College of Engg., Israna (Panipat) from
Sept.2007-May 2008.
3-years Experience as Lecturer at N.C.College of Engg., Israna (Panipat) from
Aug.2004-Aug.2007.
5-1/2 years Experience under Technical Education Haryana(Govt. Polytechnic for Women , Fbd.) from April 1999-July 2004.
1.6 Years Experience as a System Engineer at System Software group (S.S.G) Delhi from Oct..1997-March 1999.
6
Technical Skills:
Languages Visual Basic 6.0
Operating System MS-DOS 6.0,Windows 98,Windows 2000/XP
RDBMS Oracle 8.0,MS-Access,
Package Known MS Office
Educational Qualifications:
Life Time Member of Indian Society For Technical Education (ISTE)
Persuing Ph.D in Computer Science & Engg. (Registration – May 2009)
M.Tech Integrated ( Computer Science & Engineering ) July 1997. from Moscow
State Academy of Instrument Engg. and Computer Science with Grade “GOOD”
(Under INDO – USSR Scholarship Scheme )
10+2 From Hindu College Sonipat with 72%
Matriculation from Hindu High School Sonipat with Distinction (75.8%) . Job Responsibilities:
Responsible for successful Inspection of new Polytechnic MSIP from AICTE.
Responsible for successful inspection of New Polytechnics LRITM , MIP from AICTE and DTE(Haryana).
Administration both at Institute and Departmental level.
Admission In-charge at N.C.C.E.,LRITM, MIP and BMIP.
Policy planning, monitoring & evaluation both at Departmental and Institutional level
Plan and Implement Faculty development activities
Students Assessment and evaluation including examination work of the Institution.
Providing Students with Guidance and Counselling and helping in their personal, ethical moral and overall character development.
Developing, updating and maintaining MIS of the College.
Active member of NBA (Computer Science & Engg., 2005 at N.C.C.E.)
Active member of NBA (IT,2006 at N.C.C.E.)
Time -Table (2004-2005 at N.C.C.E.)
Subject Co-ordinator of Concerned Subject. ( N.C.C.E.)
Lab –incharge of Visual Programming Lab.( N.C.C.E.)
Convenor of Faculty Development Program (N.C.C.E.)
Convenor of Student Counseling (N.C.C.E.)
Member of discipline committee(N.C.C.E)
Member of purchase committee.(2003-2004) (G.P.W. Faridabad )
Co-ordinator of Horticultural Deptt. (2000-2002) (G.P.W. Faridabad )
Conducted Educational Tours . (2001-04)
Attended (STC) Twice short Term Courses at TTTI Chandigarh (2001-02)
Attended (STC) at HIPA Gurgaon (2003)
Subjecs Taught:
Computer Architecture and Organisation , Software Project Management , Fundamental of Computer and Programming in C , Computer Hardware Technologies
7
Paper Presented:
Attended the 2
nd International Conference on “Reliability, Quality and Infocom
Technology,” ICRQIT-2006 held on December 02-04, 2006 at Delhi University.
Attended & presented paper on “IT : Solving Problems and Enhancing Performance in Education”, in the national conference on Information Technology and Its Applications at
Bharti Vidyapeeth College of Engg., Paschim Vihar , New Delhi on 13
th th -14 April 2006
Attended a National Level Seminar on IT in Education- Needs, Concerns, Gaps & Solutions at NCCE, Israna, Panipat on March 25-26, 2006.
Attended and presented paper on “ Study of various Image Compression Techniques ”, organized by Indian Society of Information Theory & Applications ( ISITA) on Information Technology : Setting trends in Modern Era at NCCE, Israna on March 18-20, 2006.
Attended a national conference on “Challenges for Technology and Management in the Knowledge Millenuium” at JIET, Jind on March 2-3, 2006.
Presented Paper on “Lattice-valued finite Automata”th
in the national conference held at RIMT institute of Engg. And Technology Mandi Govindgarh on 29 March ,2008
Personal Details:
Father’s Name : Sh. Sat Pal Singla
Date Of Birth : 7 May.1972
Martial Status : Married
Languages known : English , Hindi and Russian
(Gulshan Singla)
IX. FEE
Details of fee, as approved by State fee Committee, for the
institution. First Semester/Third Semester(DET-L)
Tuition Fee 11740.00
Caution Money (Security Fee Refundable) 1500.00
Development Fee 3520.00
Student Fund 1200.00
Additional Charge 1340.00
Examination Fee: 250.00
Counseling Fee 200.00
Prospectus 250.00
Total 20000.00
Second / Fourth / Sixth Semester:
Tuition Fee 11740.00
Examination Fee: 250.00
Total 11990.00
Third Semester:
Tuition Fee 11740.00
Development Fee 3520.00
Student Fund 1200.00
Additional Charge 1340.00
Examination Fee: 250.00
Total 18050.00
Fifth Semester:
Tuition Fee 11740.00
Development Fee 3520.00
Student Fund 1200.00
Additional Charge 1340.00
Examination Fee: 250.00
Placement Prospects 500.00
Total 18550.00
Total Three Years Fee = 92570.00
Total Two Years Fee = 62530.00
Time schedule for payment of fee for the entire programme
st
Installment (July-August) nd
Installment (January- Feb.)
X. ADMISSION
Number of seats sanctioned with the year of approval
S. No Course(s) Previous Intake Revised Intake Period of Approval
01 Electrical Engg. 60 60
02 Computer Engg. 60 60
03 Electronics & Comm. Engg. 60 60
04 Civil Engg. 60 60
05 Mechanical Engg. 60 60
Total 300 300
XI. ADMISSION PROCEDURE
Mention the admission criteria
Admission is strictly on the basis of D.T.E., Haryana Rules
Distribution of seats for different categories is as per notification of Directorate of Technical Education, Haryana
Calendar for admission against vacant seats is decided by DTE
and all information is given at website www.techeduhry.nic.in
XII. CRITERIA AND WEIGHTAGES FOR ADMISSION
Admission is strictly on the basis of D.E.T. instructions and if seats still remains vacant admission will be made on the basis of merit of qualifying exam (10
th or 12
th (PCM) or ITI (2 years).
1
2
12
XV. INFORMATION ON INFRASTRUCTURE AND OTHER
RESOURCES AVAILABLE
LIBRARY:
S.N
Course(s)
Number of
Number of volumes
Journals
titles of the o books
National International
1. Electrical Engg. 340 2690 01 --
2. Computer Engg. 412 3600 03 --
3. Inst. & Control Engg 125 1300 -- --
4. Electronics & 578 4390 02 --
Comm. Engg
5. Applied Science 156 3495 -- --
6. Mechanical Engg. 446 3580 02 --
General Books 22 -- --
13
LABORATORY:
(Name of Major Labs & Equipment)
Chemistry Lab
S.N. Name of Items
1 Measuring Cylinder 25 ml
2 Measuring Cylinder 50 ml
3 Abel's Flash Point Apparatus
4 Measuring Flask 100 ml
5 Measuring Flask250 ml
6 Measuring flask 500 ml
7 Measuring Flask 1000 ml
8 Test Tubes
9 KOH
10 Filter Paper
11 Bunsen burner
12 LPG Cylinders
13 CuSO4
14 Dropper
15 Conc. H2SO4
16 pH meter
17 Test Tube Holder
18 Oxalic Acid
19 Test Tube Stand
20 Na2CO3
21 Phenolphthalene
22 HCl
23 NaOH
24 Acetic Acid
25 Acetyl Chloride
26 Redwood Viscometer
14
27 Electric Balance
28 Large Tong
29 Small Tong
30 Dessicator 6"
31 China Dish
32 Stop Watch Digital
33 Thermometer
34 Glass Rod
35 Glass Funnel
36 Wire Guaze
37 Tripod Stand
38 Burette 50 ml
39 Pipette
40 Beaker 500 ml
41 Beaker250 ml
42 Beaker 100 ml
43 Titration Flask 250 ml
44 Muffle Furnace
45 NH3 Solution
46 Distilled Water
47 Starch
48 KI
49 Kerosene Oil
50 NH4Cl
51 Benzoic Acid
52 Methyl Orange
53 AgNO3
54 Na2S2O3
55 CaSO4
56 Fehling Solution A
57 Fehling Solution B
15
58 Litmus Soln blue
59 Litmus Soln red
60 NaCl
61 Boric Acid
62 Aniline
63 Benzaldehyde
64 Formic Acid
65 Glacial Acetic Acid
66 N Phenyl Anthranilic Acid
67 N N Dimethyl Aniline
68 Nitric Acid
69 Phenol
70 Schiff"s Reagent
71 Amm. Nickel Sulphate
72 CaCo3
73 CaSO4
74 CaCl2
75 Mercuric Oxide
76 Mercuric Chloride
77 Nickel Sulphate
78 2-Naphthol
79 K2Cr2O7
80 KMnO4
81 Sodium Thiosulphate
82 Stannous Chloride
83 Sodium metal
84 Sodium Bicarbonate
85 Salicylic Acid
16
Physics Lab
S.N. Name of Items
1 Verniers callipers
2 Graves appratus
3 Screw gauge
4 Wire
5 Spherometer
6 Convex mirror
7 Spherical bob
8 Clamp stand
9 thread
10 stop watch
11 Capillary tube
12 cantilever
13 slotted wt.
14 Clamp
15 barometer
16 Convex lens (0.5cm)
17 Convex lens(0.15cm)
18 Optical needle
19 Uprights
20 Optical bench
21 Convex lens(30cm)
22 Power supply
23 Voltameter
24 Ammeter
25 Rheostat
26 Resistance box (0-5000
27 One way key
28 Galvanometer
29 Milimeter
17
30 High resistance box(0-5000
31 Thrermameter
32 Simple pendulum
33 Metallic cylinder
34 Microscope
35 Glass strip
36 PN -junction Diode
37 Beaker
38 Two way key
39 Resistance coil
Electrical Machine and B.E.E Lab
S No. Description
1 DC Power Supply (0-30V)
2 Rheostate 50 ohm Rheostate 100 ohm Rheostate 200 ohm Rheostate 300 ohm
3 Galvanometer
4 Wattmeter 150 watt Wattmeter 300 watt Wattmeter 375 watt Wattmeter 700 watt Wattmeter 3 ph, 12KW
5 Auto T/F 1 ph Auto T/F 3 ph
6 Multimeter Digital Multimeter Ananlog
7 Tong Tester
8 Power factor 1 ph Power factor 3 ph
9 Single phase load arrangement
10 Inductor Choke
11 Experimental pannel
12 Capacitors
13 Inductor Box
14 Ammeter 0-1 A Ammeter 0-1.5 A Ammeter 0-2 A Ammeter 0-3 A Ammeter 0-5A Ammeter 0-10 A
18
Ammeter 0-15 A Ammeter 0-20 A Ammeter 50 mA Ammeter 100 mA Ammeter 250 mA Ammeter 500 mA
15 Voltmeter 0-30 V Voltmeter 0-50v Voltmeter 0-60V Voltmeter 0-300V Voltmeter 0-500V Voltmeter 0-600V Voltmeter 0-650 V
16 Screw Driver Set
17 T/F 1 ph T/F 3 ph
18 Megger
19 Energymeter 1 ph Energymeter 3 ph
20 Techometer Digital Techometer Analog
21 Power Diode unit
22 Phase Sequence Indiacator
23 Lamps 100 watt Lamps 200 watt
24 Frequency meter digital
25 LCR meter
26 3ph synch. Motor
27 3 ph slipring I.M with starter
28
3 ph squirrel cage I.M with D.O.L Starter
29
DC Shunt Motor Coupled with 3 Ph I.M and Star/Delta starter
30 DC Series Motor
31
DC Shunt Motor with 4 point Starter
32
3 ph Alternator Coupled with DC Shunt motor
33 I.M 1 ph
34
Pannel: Speed control of DC motor with motor
35 General Pannel
36 Control Pannel BEE Lab
37 Main Control Pannel
19
ELECTRICAL PROJECT LAB S. NO NAME of ITEM
1 Side Cutting Plier
2 Nose Plier
3 Screw Drivers
4 Wire Stripper & Cutter
5 Hammer
6 Soldering Iron (35 W)
7 Soldering Iron Stand
8 Soldering Paste
9 Desoldering Pump
10 Hand Hexa
11 Continuity Tester
12 Multimeter
12 Regulared DC Power Supply
13 Auto Transformer, 1-phase
14 Frequency Generator
15 C. R. O
Electrical WorkShop
S No. Description
1 Combination plier
2 Screw Driver
3 S/w 1 way,5A S/w 2 way,5A
4 Socket outlet, 5A Socket outlet, 15A
5 Fuse, 6A
6 Indiactor S/W type
7 Ceiling Rose
8 Door Bell
9 Lamp Holder, Pendent
Lamp Holder, Angle
10 Electric Iron Simple Electric Iron Automatic
11 Wire Striper
12 Iron Connector
13 3 pin plug, 5A 3 pin plug, 15A
14 Bell push button
15 Spanners of Different Sizes
16 Scissor
17 Capacitor, 2.5mfd
18 Ball bearing
19 Tape Scale
20 Varnish 500ml
21 Tube light Fitting
22 DPIC
23 Earth Tester
24 Neon Tester
25 Automatic Toaster
26 Gang Box
27 wooden Board 5" x 7"
28 Junction Box
29 Round Block
30 Screw Wrinch
31 Hand Saw
32 Hammer
33 Sumbay
34 Chiessel
35 Soldering Iron
36 Soldering Road
37 Multimeter
38 Center Punch
39 Drill Bit
40 Tap
41 Tap handle
42 Allen Key
43 Oil Gun
20
21
S No. Description
44 Fuse Kit Kat - 16 Amp
45 Fuse Kit Kat - 32 Amp
46 Extension Board
47 Cooler Pump
48 Plate Cooler Pump
49 Pressure Plate
50 Lamday
51 Couplling
52 Rotary S/w
53 Series testing board
54 Pedastal Fan Set
55 Energy Meter
56 Blow Lamp
57 Super Enammeled Wire Roll
58 Leathered Paper
59 Panceline Sheet 13 X 9
60 Panceline Sheet 8 x 8
61 Panceline Sheet 5 x 7
62 MCB-25 A
63
ELCB
64
Volt Meter 0-300 V
65
Volt Meter 0-50 V
66
Ammeter 0-5 A
67
Ammeter 0-2.5 A
68
Winding Machine
69
Energy Meter Single Phase
70
DOL Starter
71
Star Delta Starter
72
Earth Tester
73
Contactor 3 Phase
74
Contactor Control Training Board
75
Electric Iron
76
Electric Iron Automatic
77
Electric Kettle
78
Refrigerator
79
Raw Material for transformer
windings ( Core, Wire, Bobbin etc.)
22
S No.
Description
80
3 Phase connection armoured
cable
81
Ceiling Fan
82
Table Fan
83
Soldering Iron
84
Washing Machine
85
Water Cooler
ELECTRICAL IECD LAB
S. NAME of ITEM
NO 1 Screw Driver
2 Plier
3 Wire Cutter
4 Hygrometer
5 Soldering Iron
6 Desoldering Pump
7 Hammer
8 Hand Drill Machine
9 Tacho Meter
10 Iron Tester
11 Soldering Iron Stand
12 Resistance Box
13 Multimeter
14 Decade Condenser Box
15 Earth Tester
16 Inductor Box
17 Meggar
18 Distortion Meter
19 Pipe Ranch
20 Microprocessor Trainer Kit
21 Voltmeter
22 Ammeter
23 Galvanometer
24 Rheostat
25 L-C Meter
26 Digital Frequency Counter
27
Light Activated Turn-off Switch
Kit
28 Regulared DC Power Supply
29 Frequency Generator
30 C. R. O
31 Voltage Stablizer
32 Auto Transformer, 1-phase
23
S. NAME of ITEM
NO 33 Auto Transformer, 3-phase
34 BCD to Seven Segment Kit
35 S C R Kit
36 Power Diode
37 Variable Resistance Kit
38 Illumination Control Using SCR
39
VI Characteristics of TRIAC &
DIAC
40 SCR, UJT Based Timer Circuit
MECHANICAL ENGINEERING DEPARTMENT
LIST OF FACILITIES
WORKSHOP
Sr. No Particulars
1 Scale
2 Hammer 800gm
3 Hammer 1Kg
4 Cold Chisel
5 Try Square
6 Double Cut Bastered File
7 Triangular File
8 Round File
9 Center Punch
10 Chipping Hammer
11 Apron
12 Goggles
13 Gloves
14 Spark Lighter
15 Cable
16 Hose (Act+Oxy)
17 Welding Table
18 Steel Tape
19 Welding Torch
20 Wood Handle
21 Cutting Torch
22 Welding Holder
23 Welding Set 200 Amp.
24 Welding Screen
25 Bench Vice
26 MIG Welding M/c
27 TIG Welding M/c
28 Spot Welding M/c
29 Gas Cylinder
30 Plier
31 Straight Peen Hammer
24
Fitting Shop
S. no Name of Items
1 Flat File Bastard 300 mm
2 Flat File Smooth 300 mm
3 Flat File Bastard 200mm
4 Round File 200 mm
5 Triangular File 150 mm
6 Triangular File 200 mm
7 Half Round File 250 mm
8 Square File 200mm
9 Ball Pin Hammer Lbs
10 Oil Cane
11 Steel Rule 300mm
12 Try Square 150 mm
13 Center Punch 100 mm
14 Hand Hacksaw Frame
15 Surface Plate
16 Vernier Height Gauge
17 Vernier Caliper 150 mm
18 Spring Divider
19 V Block Set
20 Outside Caliper 150 mm
21 Inside Caliper 150 mm
22 Micro meter 0-25mm
23 C-Clamp
24 Combination Set
25 Drilling M/c 12mm
26 Marking Block
27 Bench Vice 3 No
28 Pipe Vice 3 No
29 Number Punch 3 mm
30 Chisels
31 Drill Set 1-12mm
32 Tap And Die Set Metric
33 Working Bench 6'x4'
34 Screw Driver Set
35 Spanner Set 12/12, 12/19
36 Ratchet Brace
37 Hand Drilling M/c 13 mm
38 Scriber
39 Hand Drilling M/c 6 mm
40 Knife Edge File
41 Allen Key Set
42 Adjustable Wrench
43 Pipe Wrench
44 Tap Wrench
45 Die Handle
46 Circular Die
47 Drill Bit in mm
48 Grip Plier
49 Drill M/c Vice
25
50 Polishers 1/2 hp
51 Needle File Set
52 Feeler Gauge
53 Radius Gauge
54 Thread Pitch Gauge
55 Hand Vice
56 Sine Bar 100mm
57 Dial Gauge
58 Plug Gauge
59 Dial Vernier
60 Ratchet Die
61 Plier
Sheet Metal Shop/Paint Shop
Sr. No Particulars
1 Sheet Gauge
2 Scale
3 Try Square
4 Tin Cutter
5 L Square
6 Plastic Hammer
7 Oil Cane
8 Bench Vice
9 Air Compressor with Spray Gun
10 Painting Brush Diff. Size
11 Scrapper
Turning and Machine Shop
Sr. Particulars
1 Shaper Machine
2 Surface Grinder
3 UGM Grinder
4 Horizontal Milling Machine
5 Vertical Milling Machine
6 Planer Machine
7 Power Hacksaw
8 Pedestal Grinder
9 Lathe Machine 6'
10 Redial Drill Machine
11 Machine Vice
12 Magnetic Chuck
13 V Block
14 Universal Dividing Head
15 Out Side Caliper
16 Inside Caliper
17 Odd Leg Caliper
18 Divider
19 Screw Driver
26
20 Vernier Caliper (Ordinary)
21 Vernier Caliper (Mitoyo)
22 Combination Set
23 Revolving Center MT-3, MT-2
24 Parting Tool Holder
25 Knurling Tool
26 Tool Holder
27 Surface Gauge
28 Boring Bar
29 Tool Bit 1/2"X4"
30 Tool Bit 3/8X3"
31 Tool Bit 5/16X3"
32 Try Square 6"
33 Hand Hacksaw Frame
34 Center Punch
35 Plier
36 Steel Rule
37 Smooth File 12"
38 2nd Cut File 8"
39 Bench Vice
40 Ring Spanner
41 Almirah
42 Pipe Wrench
43 Power Hacksaw Blade
44 Grinding Wheel
45 Hand Hacksaw Blade
46 Counter Shank Drill
47 Spanner Set (mm size)
48 Socket Sleeve MT-2-3
49 Socket Slave MT-3-4
50 Socket Sleeve MT-4-5
51 End Mill Cutter
52 T Slot Cutter
53 Tool Bit 1"X8"
54 Drill Chuck 13mm
55 Grinding Dresser
56 Side & Face Cutter
57 Plane Milling Cutter
58 Drill Set
59 Steel Tape (3mtr.)
27
Carpentry and Pattern shop
Sr. Particulars
1 Steel Scale
2 Marking Gauge (Aluminum)
3 Marking Gauge (Wood)
4 Try Square
5 Steel Tape
6 Mortise Chisels (Diff. Size)
7 Metal Jack Planer
8 Wooden Planer
9 Claw Hammer
10 Ball Peen Hammer
11 Screw Driver
12 Pincer
13 Rasp File
14 Oil Stone
15 Hand Drill Machine
16 Auger
17 Firmer Chisel
18 Circular Saw
19 Wood Working Lathe Machine
20 Bench Vice (Carpentry)
21 Electric Planer
22 File ( 12" Flat Bastard )
23 Plastic Chisel Handel
24 Bevel Scale
25 Hand Saw
CNC and CIM Lab
Sr. No Particulars
1 Stabilizer
2 CNC Turn
3 Allen Key
4 Double ended Spanner
5 Screw Driver 600.
6 Oil Can
7 63 mm Brush
8 Fuses
9 Billets (Raw Material)
10 Dead Center
11 Essential Key( Control Box, Lathe Chuck,
M/c Cover)
12 Computers
13 UPS
14 X Milling Machine
15 Screw Driver
16 End mill cutter (16,12,10,8,6,5,4,3mm)
28
17 Center Drill (5.5,8,10,12mm)
18 Flat Drill
19 Slot Drill
20 Strip Bar
21 Panel Box Key
22 Bit 13 Ring Type
23 Oil Gun
24 Collet Holder
25 Collar (Diff. Size)
26 Key Handle for tool bars
27 Open ended tool bar key
28 Hardware Lock Key
29 M Tab Software
30 Key Board
31 Oil Pump machine
32 Catalogues
33 File ( 12" Flat Bastard )
Forging Shop
Sr. Particulars
1 Steel Rule
2 Hacksaw Frame
3 Hammer (Small)
4 Hammer (Big) Double Face
5 Hammer (Sladge)
6 Hammer (Cross Peen )
7 Try Square 6"
8 Centre Punch
9 Fuller
10 Flatter
11 Tongs 12"
12 Tongs 18"
13 Chisel
14 Blower
15 Forging Furnace
16 Anvil
17 Swage Block
29
LAB: Automobile
S. No. NAME OF THE APPARATUS
01 Plier
02 Nose Plier
03 Petrol Engine 2 Strike
04 Power Steering Assembly
05 Screw Adj. Plier
06 Spanner Set
07 Double Opened End Spanner
08 Socket Set + Wrench Set
09 Screw Driver Set
10 T-Socket 12 No., T-Socket 8 No.
11 Diesel Engine 4 Stroke
12 Rack & Pinion Steering System
13 Fuel Injector Pump (Multi Cylinder)
14 Battery Charger
15 Hydraulic Jack
16 Crank shaft
17 Fuel Injector Pump (Single Cylinder)
18 Bearing Puller
19 Petrol Engine 4 Stroke
20 Cam Shaft
21 Carburetor System
22 Pressure Plate
23 Clutch Plate
24 Cylinder Block 2 Stroke
25 Connecting Rod
26 Cylinder Block 4 stroke
27 Steering Extension Shaft
28 Multimeter
29 Battery (Panasonic 12 V)
30 Piston
31 Cam Shaft (1 C 4 S)
32 Hydrometer
LAB: Hydraulic Machines
S. No. NAME OF THE
APPARATUS
01 Apparatus to determine
coefficient of friction of pipes
02 Lever Safety Valve
03 Venturimeter & Orificemeter
set-up
04 Bernoulli’s Apparatus
05 Centrifugal Pump Model
06 Pelton Wheel Turbine Model
07 Francis Turbine Model
08 Pressure Gauge
09 Spring loaded safety Valve
10 Hydraulic Press Model
11 Hydraulic Jack
12 Sprit level
13 U-Tube Manometer
LAB: Installation Testing & Maintenance
S. No. NAME OF THE APPARATUS QUANTITY
01 Chain Pulley (1 ton) 02
02 Pipe Wrench (Socket type 14”) 02
03 Torque Wrench 250-600 mm 012Set
04 Torque Wrench 150-400 mm 02 Set
LAB: Inspection & Quality Control
S. No. NAME OF THE APPARATUS QUANTITY
01 Vernier Caliper 02
02 Vernier Caliper (Digital) 02
03 Vernier Height Gauge 01
04 Depth Micrometer 02
05 Digital Micrometer 02
06 Ball End Micrometer 02
07 Flat End Micrometer 02
08 Gear Roller Tester 01
09 Dial Gauge 04
10 Puppy Dial 02
11 Angle Plate 02
12 Calipers (Inside) 05
13 Calipers (Outside) 05
14 Try Square 8” 06
30
31
15 Gear Tooth Vernier 01
16 Bevel Protractor 02
17 Combination Set 02
18 Sine Bar 02
19 Plug Gauge 02
20 Ring Gauge 02
21 Snap Gauge 02
22 Radius Gauge 02
23 Feeler Gauge 04
24 Thread Gauge 02
LAB: Materials & Metallurgy
S. No. NAME OF THE APPARATUS QUANTITY
01 Digital Muffle Furnace 02
02 Metallurgical Microscope 02
LAB: Applied Mechanics
S.No. NAME OF THE APPARATUS QUANTITY
01 Glass plane 02
02 Jib crane 02
03 Inclined plane for coeff. Of friction 02
04 Screw Jack 02
05 Simply supported beam apparatus 02
06 Straight plane for coeff. Of friction 02
07 Gravesand
’ apparatus
s 02
08 Winch Crab 02
09 Worm and Worm Wheel 02
10 Weight 1kg 23
11 Weight 500gm 08
12 Weight 100gm 04
13 Weight 50gm 24
14 Weight pan 03
15 Weight 20gm 20
16 Weight 200gm 10
32
LAB: Refrigeration & Air Conditioning
S. No. NAME OF THE APPARATUS QUANTITY
01 Rotary Compressor 02
02 Refrigerator 165lt 01
03 Flaring Tool 01
04 Curving Plier 01
05 Cutting Tool for Copper Tube 01
06 Pinch of Tool 01
07 Swaging & Brazing Tool 01
08 Refrigeration Apparatus 01
09 Thermostat Switch 01
10 LP/HP Cut out switch 01
11 Overload Protector 01
12 Filter 01
13 Drier 01
LAB: Thermodynamics
S. No. NAME OF THE APPARATUS QUANTITY
01 2-S Petrol Engine (model) 01
02 2-S Diesel Engine(model) 01
03 4-S Petrol Engine(model) 01
04 4-S Diesel Engine(model) 01
05 Solex Carburetor(model) 01
06 Shut off Valve 01
07 Surface Condenser 01
08 Separating & Throttling 01 Calorimeter
09 Bomb Calorimeter 01
10 Digital temperature Indicator 01
11 Voltage controller 01
12 Glass tubes 13
13 Orsat apparatus 01
14 Babcock & Wilcox 01 Boiler(model)
15 Lancashire Boiler(model) 01
16 Common Rail Injection System 01
17 Ignition System of 01 Automobile(Battery)
18 Parallel Flow Jet Condenser 01
19 Ejector Condenser 01
20 Evaporator Condenser 01
21 Morse Test kit 01
22 Rope Brake Dynamometer 01
23 Air/Steam Pressure turbine 01
24 Redwood viscometer 01
25 Tach/dual/volt analyzer 01
26 Xenon Timing Flash Gun(2004) 01
27 Mechanical Temperature Gauge 01
33
LAB: Strength of Materials
S. No. NAME OF THE APPARATUS
01 Enkay Torsion Testing Machine
02 Enkay Universal Testing Machine
03 Enkay Spring Testing Machine
04 Impact Testing Machine
05 Rockwell Hardness Tester Apparatus
06 Job Holder
07 Pointer Diamond
08 Master Piece for Hardness
CIVIL ENGINEERING DEPARTMENT
LAB- WATER SUPPLY & WASTE WATER ENGG.
S. No. Description
1 Turbidimeter (3.5 Digit Display
range upto 1000 NTU with manual)
2 PH meter (Indication 3.5 to 4 LED
display, Operation Manual)
3 Conductivity meter (Indication 3.5 to
4 LED display, Operation Manual)
4 Inspection chamber (model)
5 Septik tank (model)
6 Biogas plant (model)
LAB- SURVEYING –I, II
S. No. Description
1 Transit theodolite (vernier type with 20sec
accuracy)
2 Optical square (made of brass)
3 Measuring Chain-30m
4 Measuring Chain-20m
5 Plain Table With Accessories(750x600mm)
6 Abney Level(125mm Size)
7 Ghat Tracer(Made Of Steel Pipe)
8 Prismatic Compass(Brass) 100mm Size &
Aluminium Stand
9 Survey Compass(100mm)
10 Cross Staff Head(100mm Size) Brass
11 Survey Umbrella(2m Dia)
12 Tangent Clinometer
13 Levelling Staves(Telescopic) Export Quality 4m In
Four Sections
34
14 Auto Level Ds-2010
15 Dumpy Level(230mm)
16 Ranging Rod(3m)
17 Measuring Tapes (20m Size) Metallic
18 Wooden Pegs
19 Planimeter Completer With All Accessories
LAB- CONCRETE TECHNOLOGY
S. No. Description
1 Electrically heated oven (thermostatically
controlled,30x30x30cm of 28ltrs capacity, stainless
steel, upto temp.250˚C)
2 Blaine air permeability apparatus(for fineness of
cement)
3 Slump cone & its accessories (for determining
workability of cement)
4 Compaction factor apparatus (for determining
workability )
5 Concrete cube moulds (15cm) CI
6 Set of sieves (Brass Frame, 20cm dia.)
(4.75,4.00,3.25,2.8,2.36,2.00,1.4,1.00mm,850,600mi
cron)
7 Flakiness index apparatus
8 Elongation index apparatus
9 Bulk density apparatus
Density Basket (3,15,30 lt)
10 Needle vibrator(vibrating pin=350mm
long&25mm dia.) , 1HP motor
LAB- SOIL & FOUNDATION ENGINEERING
S. No. Description
1 Soil exploration equipment (augers head 38mm
dia.)
2 Rapid moisture meter (50%)
3 Sand replacement method apparatus(small-
115mm dia. Sand pouring, container and metal
tray 30cm sq. and 5cm deep with 10cm hole in
center)
4 Core cutter apparatus(as per IS 2720 part XX1X-
1966)
5 Liquid limit device and
Plastic limit device
6 Pycnometer with burette(1000ml
7 Compaction apparatus using light
compaction(compaction mould mild steel,150mm
int.dia.x127.3mm ht. X 2250cc with collar & rammer of
4.89kgX450mm control fall)
35
LAB- CONSTRUCTION MATERIAL
S. Description
No.
1 Vicat needle apparatus
2 Le chatlier mould
3 Compression testing machine(1000KN
capacity)
4 Cube models 7.07cms cube loose base plate
5 Weighing balance 10kg
6 90 micron sieve brass with lid and pan
ELECTRONICS & COMMUNICATION ENGINEERING
DEPARTMENT
Analog Eltx. Lab:
S.No. Name of item
1 Function Generator/Signal Generator
2 Auto Transformer
3 Bread Board
4 Ammeter
5 Voltmeter
6 Emitter follower kit
7 DC Power supply
8 Multimeter
9 Desoldering Pump
10 Soldering Iron
11 Screw Driver Set
12 Solder wire role
13 Flux Box
14 Op-Amp Parameter Kit
15 Op-Amp Application Kit
16 Op-Amp Trainer kit
17 CRO & CRO Probe
18 Wire stripper
19 Twizzer
20 Crystal Oscillator Kit
36
21 Wein Bridge Oscillator Kit
22 Hartley Oscillator Kit
23 Phase Shift Oscillator Kit
24 Tuned Amplifier Kit
25 CE Amplifier Kit
26
Integrating,Differentiating & Clamping Kit
27 P-N Junction Diode Characteristics kit
28 Zener Diode Characteristics kit
29 Push -Pull Amplifier Kit
30 Two Stage Transistor Amplifier Kit
31 Two Stage RC Coupled Amplifier Kit
32 JFET Characteristics kit
33 Single Ended Amplifier kit
34 Transistor Characteristics kit
35 Multivibrator Bi-stable Kit
36 Multivibrator Astable Kit
37 Nose Plier
38 Flexible wire Roll
39 Single stage RC Coupled Amplifier Kit
40 Transformer (9-0-9)
41 Hex Saw
Communication Lab S.No. Name of item
1. Microwave
Klystron Power Supply
Bench
a Klystron Mount
b Klystron Tube
C Variable Atten.
d Slotted Section with Probe Carriage
e Tunable Probe
f Solid State VSWR Meter
g Frequency Meter
h Pyramidal Horn
i Isolator/Circulator
j Magic Tee
k Multi hole Directional Coupler
l Matched terination
m W/G Detector Mount
n Co-axial Adoptor
37
o W/G Stand
p Detector Diode
q Microwave Main Cord For KP-1010 Supply
r Klystron Power Supply variable
2 Fibre optic Trainer Kit
3 T.V. Kit(B& W)
4 T.V. Kit(Colour)
5 T.V. (Texla)
6 T.V. Picture Tube (B& W)
7 T.V. Picture Tube (Colour)
8 Old T.V. (20' B.W.)
9 T.V. Cabinet
10 T.V. Cabinet For Colour T.V.
11 T.V. feeder Wire
12 Colour T.V.( New)
13 Sound Column(Speaker)
14 Stereo Casstte Amplifier
15 Mike Ahtja
16 Horn Speaker
17 Stand
18 Pattern generator (BW)
19 Pattern generator (Colour)
20 Radio(KCHIBO 10 Band)
21 Audio Cassette
22 Telephone Set(Push Button)
23 AF Oscillator(Tropicion)
24 AM Modulator/ Demodulator KIT
25 FM Generator(1012)
26 CRO
27 AM/FM Generator
28 Radio Recevier Kit
29 PAM Kit
30 PPM Kit
31 PWM Kit
32 FM Generator Kit
33 O/P Power Meter
34 Pa System
35 Satillite Receiver
36 Regulated DC Power Supply
37 Stereo Amplifier Kit
38 Stero amplifier
39 DB Step Attenuator
40 AC MilliVoltmeter
41 Dc Micro Voltammeter
42 AF-RF Signal Generator
38
43 RF Signal Generator
44 Pulse Generator
45 Spot Freq. Audio Oscillator
46 LCR Meter
47 Step Down Transformer
48 CRO Probe
49 Soldering Iron
50 IC 741
51 Digital Multimeter
52 Analog Multimeter
53 LED
54 Potentiometer
55 PCM Kit
56 Dish Antenna Kit
57 DTMF Tele phone kit
Digital & Microprocessor Lab:
Sr. No. Name of item
1 microprocessor8085
2 microprocessor8086
3 Stepper motor controller card
4 ADC card
5 8051 microcontroller
6 Digital I/O interface card
7 Dual DAC
8 Elevator simulator card
9 Regulated Dc power supply
10 Keyboard interfcae card
11 Ic tester interfcace card
12 Multimeter(DIGITAL)
13 DC microvolt-ammeter
14 AC millivoltmeter
15 Electronic volt ohm meter
16 Soldering iron
17 Sine square wave oscillator
18 Condenser Box
19 Transistor curve Tracer
20 Logic conroller interfcae card
21 Opto coupler interface card
22 Printer
23 P-III Computer
39
M.O.E.E. Lab
Sr. No. Name of item
1 Digital LCR meter
2 Distortion meter
3 Desoldering pump
4 Frequency counter
5 LCR meter
6 PA systm
7 Multimeter
8 Screw Driver ser
9 Soldering Iron
10 Tape Recorder
11 TV
12 Video Game
13 VCD player
14 Wire Stripper
15 Wire cutter
16 Inverter
17 Stereo Amplifier
18 Ammeter
19 ADC
20 Bread board
21 CRO
22 CRO Probe
23 Camel cutter
24 Drilling Machine
25 DAC
26 Dual power supply
27 DC speed Control System
28 Function Generator
29 Hygrometer
30 IC regulated Power supply
31 Iron stand
32
Linear displacement trainer kit
33 LVDT &induction kit
34 Linear system simulation kit
35 LDR Kit
36 Microcontroller kit
37 plier
38 Pulse generator
39 PID controller
40 Programmer kit
41 PH meter
42 Rotational speed trainer kit
43 Relay control system
44 Signal generator
45 Strain gauge kit
46 Steel cutter
47 Sound level meter
48 Syncho Tx/Rx kit
49 Stepper motor kit
50 Sphygrmanometer
51 Thermal trainer kit
52 Torque/pressure kit
53 Temp/Thermocouple kit
54 Usb card
55 U tube
56 Screw Driver
57 Volt meter
58 Vernier caliper
Electronic Workshop Lab
S.No. Name of item
1 Bench vice
2 Continuty tester
3 Drill machine electric
4 Hand drill machine
5 De soldering wire
6 De soldering wick
7 De soldering pump
8 Fecl3
9 Hammer
10 Claw Hammer
11 Hacksaw
12 Multimeter(Analog)
13 Plier
14 Round Spanner
15 Camel cutter
16 Spanner Set
17 Soldering Iron
18 Soldering Iron stand
19 Solder wire
20 Screw driver
21 Tinning Pot.
22 Twizzer
23 Transformer
24 Cooper Clad Sheet
25 Wire Stripper
40
26 Steel Cutter
27 Digital Multimeter
28 Stabilizer
29 Nose Plier
GAMES AND SPORTS FACILITY
Indoor Games : Table Tennis, Badminton
Outdoor games : Volley Ball, Basket Ball, Cricket, Football etc.
EXTRA CURRICULAR ACTIVITIES
Annual Function, Quiz, Debates etc.
DETAILS OF ACADEMIC FACILITIES
Description No. Size in Sqm
Class Room 15 1088
Tutorial Room 04 132
Drawing Hall 01 132
Laboratories 26 2056
Computer Centre 01 150 (Total Area)
Workshop 01 204
Library 01 350
Seminar Hall 01 132
Additional Workshop 01 198
Reading Room in Library 01 65
CURRICULUM FOR EACH OF THE PROGRAMMES AS APPROVED BY THE BOARD/UNIVERSITY STUDY
AND EVALUATION SCHEME FOR DIPLOMA PROGRAMME
Visit the link for Syllabus and Study Scheme http://hsbte.org.in/syllabus
XVI. Enrollment of students in the last 3 years
Name of running Institutes /Training
Centres
Types of Course /
Training Year of
establishment of
Institute
Sanctioned intake
Total number of
students enrolled in
the
institute
(Certificate /Diploma
/ UG/PG etc.)
Hindu Institute of Technology, Sonepat
Diploma 1994 1020 205
XVII. LoA and subsequent EoA till the current Academic Year.
F.No. North-West/1-731858632/2012/EOA Date: 10 May
2012
To,
The Financial Commissioner &
Principal Secretary (Technical)
Govt. of Haryana,
Room No. 503/5,
Sector -17 New
Secretariat,
Chandigarh-160017
Sub: Extension of approval for the academic year 2012-13
Ref: Application of the Institution for Extension of approval for
the academic year 2012-13 Sir/Madam,
In terms of the provisions under the All India Council for Technical Education (Grant of
Approvals for Technical Institutions) Regulations 2010 notified by the Council vide
notification number F-No.37-3/Legal/2010 dated 10/12/2010 and amendment vide
notification number F-No.37-3/Legal/2011 dated 30/09/2011 and norms standards,
procedures and conditions prescribed by the Council from time to time, I am directed to
convey the approval to
Regional Office North-West Application Id 1-731858632
Permanent Id 1-463560831
Name of the Institute HINDU INSTITUTE OF
TECHNOLOGY Institute Address INDUSTRIAL AREA, SONEPAT, SONEPAT,
Haryana, 131001
Name of the
Society/Trust
THE SONEPAT HINDU
EDUCATIONAL &
CHARITABLE
SOCIETY,SONEPAT
Society/Trust Address HINDU COLLEGE,ROHTAK
ROAD,SONEPAT,SONEPAT,SONEPAT,Haryana,131 001
Institute Type Unaided - Private
Opted for change from
Women to Co-ed
No Opted for change of
name
No Opted for change of
site
No
Change from Women to
Co-ed approved
Not Applicable Change of name
Approved
Not Applicable Change of site
Approved
Not Applicable
to conduct following courses with the intake indicated below for the academic year 2012-13
Application Number: 1-731858632* Page 1 of 4
Note: This is a Computer generated Extension of Approval Letter. No signature is required. Letter Printed On:18 May 2012.
Printed By : AIC003246
Application Id: 1- 731858632
Cour
se
Full
/Par
t T
ime
Affiliatin
g Body
Inta
ke
2011
-12
Inta
ke
Appro
ved
for
12-1
3
NR
I
PIO
Fore
ign C
oll
abora
tion
Program Shi ft Lev
el
ENGINE
ERING
AND
TECHNO
LOGY
1st
Shi ft
DIP
LO
MA
COM
PUT
ER
ENG
INEE
RIN
G
FULL TIME DIRECTOR
ATE OF
TECHNICA
L
EDUCATIO
N,
CHANDIGA
RH
90 90 No No No
ENGINE
ERING
AND
TECHNO
LOGY
1st
Shi ft
DIP
LO
MA
ELE
CTRI
CAL
ENG
INEE
RIN
G
FULL TIME DIRECTOR
ATE OF
TECHNICA
L
EDUCATIO
N,
CHANDIGA
RH
60 60 No No No
ENGINE
ERING
AND
TECHNO
LOGY
1st
Shi ft
DIP
LO
MA
ELE
CTR
ONI CS &
COM
MUN
ICAT
ION
ENG
G
FULL TIME DIRECTOR
ATE OF
TECHNICA
L
EDUCATIO
N,
CHANDIGA
RH
120 120 No No No
ENGINE
ERING
AND
TECHNO
LOGY
1st
Shi ft
DIP
LO
MA
INST
RUM
ENT
ATI
O N &
CON
TRO
L
ENG
INEE
RIN
G
FULL TIME DIRECTOR
ATE OF
TECHNICA
L
EDUCATIO
N,
CHANDIGA
RH
30 0 No No No
ENGINE
ERING
AND
TECHNO
LOGY
1st
Shi ft
DIP
LO
MA
MEC
HANI
CAL
ENG
INEE
RIN
G
FULL TIME DIRECTOR
ATE OF
TECHNICA
L
EDUCATIO
N,
CHANDIGA
RH
120 120 No No No
ENGINE
ERING
AND
TECHNO
LOGY
1st
Shi ft
DIP
LO
MA
CIVI
L
ENG
INEE
RIN
G
FULL TIME DIRECTOR
ATE OF
TECHNICA
L
EDUCATIO
N,
CHANDIGA
RH
60 60 No No No
Application Number: 1-731858632* Page 2 of 4
Note: This is a Computer generated Extension of Approval Letter. No signature is required. Letter Printed On:18 May 2012.
Printed By : AIC003246
Application Id: 1- 731858632
Cour
se
Full
/Par
t T
ime
Affiliatin
g Body
Inta
ke
2011
-12
Inta
ke
Appro
ved
for
12-1
3
NR
I
PIO
Fore
ign C
oll
abora
tion
Program Shi ft Lev
el
ENGINE
ERING
AND
TECHNO
LOGY
1st
Shi ft
DIP
LO
MA
AUT
OMO
BILE
ENG
INEE
RIN
G
FULL TIME DIRECTOR
ATE OF
TECHNICA
L
EXAMINAT
ION
HARYANA
0 0 No No No
The above mentioned approval is subject to the condition that HINDU INSTITUTE OF TECHNOLOGY shall follow
and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and
the undertaking / affidavit given by the institution along with the application submitted by the
institution on portal.
In case of any differences in content in this Computer generated Extension of Approval Letter,
the content/information as approved by the Executive Council / General Council as available on
the record of AICTE shall be final and binding.
Strict compliance of Anti-Ragging Regulation:- Approval is subject to strict compliance of
provisions made in AICTE Regulation notified vide F. No. 37-3/Legal/AICTE/2009 dated July
1, 2009 for Prevention and Prohibition of Ragging in Technical Institutions. In case Institution
fails to take adequate steps to Prevent Ragging or fails to act in accordance with AICTE
Regulation or fails to punish perpetrators or incidents of Ragging, it will be liable to take any
action as defined under clause 9(4) of the said Regulation.
(Dr. K P Isaac)
Member Secretary, AICTE
Copy to:
1. The Regional Officer,
All India Council for
Technical Education Plot No.
1310, Sector 42-B
Chandigarh-160 036
2. The Director Of Technical Education,
Haryana
3. The Registrar,
DIRECTORATE OF TECHNICAL EDUCATION, CHANDIGARH
4. The Principal / Director,
HINDU INSTITUTE OF
TECHNOLOGY
INDUSTRIAL AREA,
SONEPAT,SONEPAT,
Haryana,131001
Application Number: 1-731858632* Page 3 of 4
Note: This is a Computer generated Extension of Approval Letter. No signature is required. Letter Printed On:18 May 2012.
Printed By : AIC003246
5. The Secretary / Chairman,
THE SONEPAT HINDU EDUCATIONAL &
CHARITABLE SOCIETY,SONEPAT HINDU
COLLEGE,ROHTAK ROAD,SONEPAT,
SONEPAT,SONEPAT,
Haryana,131001
6. Guard File(AICTE)
Application Number: 1-731858632* Page 4 of 4
Note: This is a Computer generated Extension of Approval Letter. No signature is required. Letter Printed On:18 May 2012.
Printed By : AIC003246
F.No. North-West/1-1362104003/2013/EOA Date: 19-Mar-
2013
To,
The Financial Commissioner &
Principal Secretary (Technical)
Govt. of Haryana,
Room No. 503/5,
Sector -17 New
Secretariat,
Chandigarh-160017
Sub: Extension of approval for the academic year 2013-14
Ref: Application of the Institution for Extension of approval for
the academic year 2013-14 Sir/Madam,
In terms of the provisions under the All India Council for Technical Education (Grant of
Approvals for Technical Institutions) Regulations 2012 notified by the Council vide
notification number F-No.37-3/Legal/2012 dated 27/09/2012 and norms standards, procedures
and conditions prescribed by the Council from time to time, I am directed to convey the
approval to
Regional Office North-West Application Id 1-1362104003
Permanent Id 1-463560831
Name of the Institute HINDU INSTITUTE OF
TECHNOLOGY Institute Address INDUSTRIAL AREA, SONEPAT, SONEPAT,
Haryana, 131001
Name of the
Society/Trust
THE SONEPAT HINDU
EDUCATIONAL &
CHARITABLE
SOCIETY,SONEPAT
Society/Trust Address HINDU COLLEGE,ROHTAK
ROAD,SONEPAT,SONEPAT,SONEPAT,Haryana,131 001
Institute Type Unaided - Private
Opted for change from
Women to Co-ed
No Opted for change of
name
No Opted for change of
site
No
Change from Women to
Co-ed approved
Not Applicable Change of name
Approved
Not Applicable Change of site
Approved
Not Applicable
to conduct following courses with the intake indicated below for the academic year 2013-14
Application Number: 1-1362104003* Page 1 of 3
Note: This is a Computer generated Extension of Approval Letter. No signature is required. Letter Printed On:28 March 2013.
Printed By : AIC003246
Application Id: 1-1362104003 Course
Full
/Par
t T
ime
Affiliating Body
Inta
ke
2012
-13
Inta
ke
Appro
ved
for
13-1
4
NR
I
PIO
Fore
ign C
oll
abora
tion
Program Shift Level
ENGINEERING
AND
TECHNOLOGY
1st Shift DIPLOMA CIVIL
ENGINEERING
FULL
TIME
Directorate of
Technical Education,
60 120 No No No
ENGINEERING
AND
TECHNOLOGY
1st Shift DIPLOMA COMPUTER
ENGINEERING
FULL
TIME
Directorate of
Technical Education,
90 60 No No No
ENGINEERING
AND
TECHNOLOGY
1st Shift DIPLOMA ELECTRICAL
ENGINEERING
FULL
TIME
Directorate of
Technical Education,
60 60 No No No
ENGINEERING
AND
TECHNOLOGY
1st Shift DIPLOMA ELECTRONICS &
COMMUNICATI
ON ENGG
FULL
TIME
Directorate of
Technical Education,
120 60 No No No
ENGINEERING
AND
TECHNOLOGY
1st Shift DIPLOMA MECHANICAL
ENGINEERING
FULL
TIME
Directorate of
Technical Education,
120 120 No No No
Validity of the course details may be verified at www.aicte-india.org>departments>approvals
The above mentioned approval is subject to the condition that HINDU INSTITUTE OF TECHNOLOGY shall follow
and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and
the undertaking / affidavit given by the institution along with the application submitted by the
institution on portal.
In case of any differences in content in this Computer generated Extension of Approval Letter,
the content/information as approved by the Executive Council / General Council as available on
the record of AICTE shall be final and binding.
Application Number: 1-1362104003* Page 2 of 3
Note: This is a Computer generated Extension of Approval Letter. No signature is required. Letter Printed On:28 March 2013.
Printed By : AIC003246
Strict compliance of Anti-Ragging Regulation:- Approval is subject to strict compliance of
provisions made in AICTE Regulation notified vide F. No. 37-3/Legal/AICTE/2009 dated July
1, 2009 for Prevention and Prohibition of Ragging in Technical Institutions. In case Institution
fails to take adequate steps to Prevent Ragging or fails to act in accordance with AICTE
Regulation or fails to punish perpetrators or incidents of Ragging, it will be liable to take any
action as defined under clause 9(4) of the said Regulation.
(Dr. Kuncheria P. Isaac)
Member Secretary, AICTE
Copy to:
1. The Regional Officer,
All India Council for
Technical Education Plot No.
1310, Sector 42-B
Chandigarh-160 036
2. The Director Of Technical Education, Haryana
3. The Registrar,
Directorate of Technical Education,
4. The Principal / Director,
HINDU INSTITUTE OF
TECHNOLOGY
INDUSTRIAL AREA,
SONEPAT,SONEPAT,
Haryana,131001
5. The Secretary / Chairman,
THE SONEPAT HINDU EDUCATIONAL &
CHARITABLE SOCIETY,SONEPAT HINDU
COLLEGE,ROHTAK ROAD,SONEPAT,
SONEPAT,SONEPAT,
Haryana,131001
6. Guard File(AICTE)
Application Number: 1-1362104003* Page 3 of 3
Note: This is a Computer generated Extension of Approval Letter. No signature is required. Letter Printed On:28 March 2013.
Printed By : AIC003246
F.No. North-West/1-2016738150/2014/EOA Date: 11-Mar-
2014
To,
The Financial Commissioner &
Principal Secretary (Technical)
Govt. of Haryana,
Room No. 503/5,
Sector -17 New
Secretariat,
Chandigarh-160017
Sub: Extension of approval for the academic year 2014-15
Ref: Application of the Institution for Extension of approval for
the academic year 2014-15 Sir/Madam,
In terms of the provisions under the All India Council for Technical Education (Grant of
Approvals for Technical Institutions) Regulations 2012 notified by the Council vide
notification number F-No.37-3/Legal/2012 dated 27/09/2012 and norms standards, procedures
and conditions prescribed by the Council from time to time, I am directed to convey the
approval to
Regional Office North-West Application Id 1-2016738150
Permanent Id 1-463560831
Name of the Institute HINDU INSTITUTE OF
TECHNOLOGY Institute Address INDUSTRIAL AREA, SONEPAT, SONEPAT,
Haryana, 131001
Name of the
Society/Trust
THE SONEPAT HINDU
EDUCATIONAL &
CHARITABLE
SOCIETY,SONEPAT
Society/Trust Address HINDU COLLEGE,ROHTAK
ROAD,SONEPAT,SONEPAT,SONEPAT,Haryana,131 001
Institute Type Unaided - Private
Opted for change from
Women to Co-ed
No Opted for change of
name
No Opted for change of
site
No
Change from Women to
Co-ed approved
Not Applicable Change of name
Approved
Not Applicable Change of site
Approved
Not Applicable
to conduct following courses with the intake indicated below for the academic year 2014-15
Application Number: 1-2016738150* Page 1 of 3
Note: This is a Computer generated Letter of Approval.No signature is required. Letter Printed On:26 May 2014
Printed By : aic003246
Application Id: 1-2016738150 Course
Full
/Par
t T
ime
Affiliating Body
Inta
ke
2013
-14
Inta
ke
Appro
ved
for
14-1
5
NR
I A
ppro
val
sta
tus
PIO
Appro
val
sta
tus
Fore
ign C
oll
abora
tion
Appro
val
sta
tus
Program Shift Level
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA CIVIL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
120 120 No No N
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA COMPUTER
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
60 60 No No N
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA ELECTRICAL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
60 60 No No N
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA ELECTRONICS &
COMMUNICATION
ENGG
FULL
TIME
Directorate of
Technical
Education,
60 60 No No N
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA MECHANICAL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
120 120 No No N
Validity of the course details may be verified at www.aicte-india.org>departments>approvals
The above mentioned approval is subject to the condition that HINDU INSTITUTE OF TECHNOLOGY shall follow
and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and
the undertaking / affidavit given by the institution along with the application submitted by the
institution on portal.
In case of any differences in content in this Computer generated Extension of Approval Letter,
the content/information as approved by the Executive Council / General Council as available on
the record of AICTE shall be final and binding.
Application Number: 1-2016738150* Page 2 of 3
Note: This is a Computer generated Letter of Approval.No signature is required. Letter Printed On:26 May 2014
Printed By : aic003246
Strict compliance of Anti-Ragging Regulation:- Approval is subject to strict compliance of
provisions made in AICTE Regulation notified vide F. No. 37-3/Legal/AICTE/2009 dated July
1, 2009 for Prevention and Prohibition of Ragging in Technical Institutions. In case Institution
fails to take adequate steps to Prevent Ragging or fails to act in accordance with AICTE
Regulation or fails to punish perpetrators or incidents of Ragging, it will be liable to take any
action as defined under clause 9(4) of the said Regulation.
(Dr. Kuncheria P. Isaac)
Member Secretary, AICTE
Copy to:
1. The Regional Officer,
All India Council for Technical
Education Plot No. 1A, 5th
Floor, DTE(Pb..) Building,
Dakshin Mark, Sector 36-A, Chandigarh-160 036
2. The Director Of Technical Education, Haryana
3. The Principal / Director,
HINDU INSTITUTE OF
TECHNOLOGY
INDUSTRIAL AREA,
SONEPAT,SONEPAT,
Haryana,131001
4. The Secretary / Chairman,
THE SONEPAT HINDU EDUCATIONAL &
CHARITABLE SOCIETY,SONEPAT HINDU
COLLEGE,ROHTAK ROAD,SONEPAT,
SONEPAT,SONEPAT,
Haryana,131001
5. Guard File(AICTE)
Application Number: 1-2016738150* Page 3 of 3
Note: This is a Computer generated Letter of Approval.No signature is required. Letter Printed On:26 May 2014
Printed By : aic003246
F.No. North-West/1-2454355179/2015/EOA Date: 07-Apr-2015
To,
The Financial Commissioner &
Principal Secretary (Technical)
Govt. of Haryana,
Room No. 503/5,
Sector -17 New
Secretariat,
Chandigarh-160017
Sub: Extension of approval for the academic year 2015-16
Ref: Application of the Institution for Extension of approval for
the academic year 2015-16 Sir/Madam,
In terms of the provisions under the All India Council for Technical Education (Grant of
Approvals for Technical Institutions) Regulations 2012 notified by the Council vide
notification number F-No.37-3/Legal/2012 dated 27/09/2012 and norms standards, procedures
and conditions prescribed by the Council from time to time, I am directed to convey the
approval to
Regional Office North-West Application Id 1-2454355179
Permanent Id 1-463560831
Name of the Institute HINDU INSTITUTE OF
TECHNOLOGY Institute Address INDUSTRIAL AREA, SONEPAT, SONEPAT,
Haryana, 131001
Name of the
Society/Trust
THE SONEPAT HINDU
EDUCATIONAL &
CHARITABLE
SOCIETY,SONEPAT
Society/Trust Address HINDU COLLEGE,ROHTAK
ROAD,SONEPAT,SONEPAT,SONEPAT,Haryana,131 001
Institute Type Unaided - Private
Opted for change from
Women to Co-ed
No Opted for change of
name
No Opted for change of
site
No
Change from Women to
Co-ed approved
Not Applicable Change of name
Approved
Not Applicable Change of site
Approved
Not Applicable
To conduct following courses with the intake indicated below for the academic year 2015-16
Application Number: 1-2454355179* Page 1 of 3
Note: This is a Computer generated Letter of Approval.No signature is required. Letter Printed On:11 April 2015
Printed By : AIC003246
Application Id: 1-2454355179 Course
Full
/Par
t T
ime
Affiliating Body
Inta
ke
2014
-15
Inta
ke
Appro
ved
for
15-1
6
NR
I A
ppro
val
sta
tus
PIO
Appro
val
sta
tus
Fore
ign C
oll
abora
tion
Appro
val
sta
tus
Program Shift Level
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA CIVIL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
120 120 NA NA
NA
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA COMPUTER
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
60 60 NA NA
NA
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA ELECTRICAL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
60 60 NA NA
NA
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA ELECTRONICS &
COMMUNICATION
ENGG
FULL
TIME
Directorate of
Technical
Education,
60 60 NA NA
NA
ENGINEERING
AND
TECHNOLOGY
1st
Shift
DIPLOMA MECHANICAL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
120 120 NA NA
NA
Note: Validity of the course details may be verified at www.aicte-
india.org>departments>approvals
The above mentioned approval is subject to the condition that HINDU INSTITUTE OF TECHNOLOGY shall follow
and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and
the undertaking / affidavit given by the institution along with the application submitted by the
institution on portal.
In case of any differences in content in this Computer generated Extension of Approval Letter,
the content/information as approved by the Executive Council / General Council as available on
the record of AICTE shall be final and binding.
Strict compliance of Anti-Ragging Regulation:- Approval is subject to strict compliance of
provisions made in AICTE Regulation notified vide F. No. 37-3/Legal/AICTE/2009 dated July
1, 2009 for Prevention and Prohibition of Ragging in Technical Institutions. In case Institution
fails to take adequate steps to Prevent Ragging or fails to act in accordance with AICTE
Regulation or fails to punish perpetrators or incidents of Ragging, it will be liable to take any
action as defined under clause 9(4) of the said Regulation.
Application Number: 1-2454355179* Page 2 of 3
Note: This is a Computer generated Letter of Approval.No signature is required. Letter Printed On:11 April 2015
Printed By : AIC003246
Dr. Avinash S
Pant Actg
Chairman,
AICTE
Copy to:
1. The Regional Officer,
All India Council for Technical
Education Plot No. 1A, 5th
Floor, DTE(Pb..) Building,
Dakshin Mark, Sector 36-A, Chandigarh-160 036
2. The Director Of Technical Education, Haryana
3. The Registrar, Directorate of Technical Education,
4. The Principal / Director, HINDU INSTITUTE OF
TECHNOLOGY
INDUSTRIAL AREA,
SONEPAT,SONEPAT,
Haryana,131001
5. The Secretary / Chairman,
THE SONEPAT HINDU EDUCATIONAL &
CHARITABLE SOCIETY,SONEPAT HINDU
COLLEGE,ROHTAK ROAD,SONEPAT,
SONEPAT,SONEPAT,
Haryana,131001
6. Guard File(AICTE)
Application Number: 1-2454355179* Page 3 of 3
Note: This is a Computer generated Letter of Approval.No signature is required. Letter Printed On:11 April 2015
Printed By : AIC003246
F.No. North-West/1-2816419699/2016/EOA Date: 05-Apr-2016
To,
The Financial Commissioner &
Principal Secretary (Technical)
Govt. of Haryana,
Room No. 503/5,
Sector -17 New
Secretariat,
Chandigarh-160017
Sub: Extension of approval for the academic year 2016-17
Ref: Application of the Institution for Extension of approval for
the academic year 2016-17 Sir/Madam,
In terms of the provisions under the All India Council for Technical Education (Grant of
Approvals for Technical Institutions) Regulations 2012 notified by the Council vide notification
number F-No.37-3/Legal/2012 dated 27/09/2012 and norms standards, procedures and
conditions prescribed by the Council from time to time, I am directed to convey the approval to
Regional Office North-West Application Id 1-2816419699
Name of the Institute HINDU INSTITUTE OF
TECHNOLOGY Permanent Id 1-463560831
Name of the
Society/Trust
THE SONEPAT HINDU
EDUCATIONAL &
CHARITABLE
SOCIETY,SONEPAT
Institute Address INDUSTRIAL AREA, SONEPAT, SONEPAT, Haryana, 131001
Institute Type Unaided - Private Society/Trust Address HINDU COLLEGE,ROHTAK
ROAD,SONEPAT,SONEPAT,SONEPAT,Haryana,131 001
Opted for change from
Women to Co-ed and Vice
versa
No Opted for change of
name
No Opted for change of
site
No
Change from Women to
Co-ed approved and Vice
versa
Not Applicable Change of name
Approved
Not Applicable Change of site
Approved
Not Applicable
To conduct following courses with the intake indicated below for the academic year 2016-17
Application Id: 1-2816419699 Course
Full
/Par
t
Tim
e
Affiliating Body
Inta
ke
2015
-16
Inta
ke
Appro
ved
for
2016
-
17
NR
I
Appro
val
stat
us
PIO
/
FN
/
Gulf
quota
Appro
va
l st
atus
Fore
ign
Coll
abor
ario
n/T
w
inin
g
Pro
gra
m
Appro
val
stat
us*
All India Council for Technical Education
(A Statutory body under Ministry of HRD, Govt. of India)
7th Floor, Chandralok Building, Janpath, New Delhi- 110 001
PHONE: 23724151/52/53/54/55/56/57 FAX: 011-23724183 www.aicte-India.org
Program Shift Level
ENGINEERIN G
AND
1st
Shift
DIPL
OMA
CIVIL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
120 120 NA NA NA
Application Number: 1-2816419699 Page 1 of 3
Note: This is a Computer generated Report.No signature is required. Letter Printed On:22 April 2016
Printed By : aic003246
TECHNOLO
GY
ENGINEERIN G
AND
TECHNOLO GY
1st
Shift
DIPL
OMA
COMPUTER
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
60 60 NA NA NA
ENGINEERIN G
AND
TECHNOLO GY
1st
Shift
DIPL
OMA
ELECTRICAL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
60 60 NA NA NA
ENGINEERIN G
AND
TECHNOLO GY
1st
Shift
DIPL
OMA
ELECTRONICS
&
COMMUNICATI
ON ENGG
FULL
TIME
Directorate of
Technical
Education,
60 60 NA NA NA
ENGINEERIN G
AND
TECHNOLO GY
1st
Shift
DIPL
OMA
MECHANICAL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education,
120 120 NA NA NA
The above mentioned approval is subject to the condition that HINDU INSTITUTE OF TECHNOLOGY shall follow
and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and
the undertaking / affidavit given by the institution along with the application submitted by the
institution on portal.
In case of any differences in content in this Computer generated Extension of Approval Letter,
the content/information as approved by the Executive Council / General Council as available on
the record of AICTE shall be final and binding.
Strict compliance of Anti-Ragging Regulation:- Approval is subject to strict compliance of
provisions made in AICTE Regulation notified vide F. No. 37-3/Legal/AICTE/2009 dated July
1, 2009 for Prevention and Prohibition of Ragging in Technical Institutions. In case Institution
fails to take adequate steps to Prevent Ragging or fails to act in accordance with AICTE
Regulation or fails to punish perpetrators or incidents of Ragging, it will be liable to take any
action as defined under clause 9(4) of the said Regulation.
Note: Validity of the course details may be verified at www.aicte-india.org
Dr. Avinash S Pant Vice -
Chairman, AICTE
Copy to:
All India Council for Technical Education
(A Statutory body under Ministry of HRD, Govt. of India)
7th Floor, Chandralok Building, Janpath, New Delhi- 110 001
PHONE: 23724151/52/53/54/55/56/57 FAX: 011-23724183 www.aicte-India.org
1. The Regional Officer, All India Council for Technical
Education Plot No. 1A, 5th
Floor, DTE(Pb..) Building,
Dakshin Mark, Sector 36-A, Chandigarh-160 036
2. The Director Of Technical Education,
Application Number: 1-2816419699 Page 2 of 3
Note: This is a Computer generated Report.No signature is required. Letter Printed On:22 April 2016
Printed By : aic003246
Haryana
3. The Registrar, Directorate of Technical Education,
4. The Principal / Director, HINDU INSTITUTE OF
TECHNOLOGY
INDUSTRIAL AREA,
SONEPAT,SONEPAT,
Haryana,131001
5. The Secretary / Chairman,
THE SONEPAT HINDU EDUCATIONAL &
CHARITABLE SOCIETY,SONEPAT HINDU
COLLEGE,ROHTAK ROAD,SONEPAT,
SONEPAT,SONEPAT,
Haryana,131001
6. Guard File(AICTE)
All India Council for Technical Education
(A Statutory body under Ministry of HRD, Govt. of India)
7th Floor, Chandralok Building, Janpath, New Delhi- 110 001
PHONE: 23724151/52/53/54/55/56/57 FAX: 011-23724183 www.aicte-India.org
Application Number: 1-2816419699 Page 3 of 3
Note: This is a Computer generated Report.No signature is required. Letter Printed On:22 April 2016
Printed By : aic003246
F.No. North-West/1-3330503850/2017/EOA Date: 30-Mar-2017
To,
The Financial Commissioner &
Principal Secretary (Technical)
Govt. of Haryana,
Room No. 503/5,
Sector -17 New
Secretariat,
Chandigarh-160017
Sub: Extension of approval for the academic year 2017-18
Ref: Application of the Institution for Extension of approval for
the academic year 2017-18 Sir/Madam,
In terms of the provisions under the All India Council for Technical Education (Grant of
Approvals for Technical Institutions) Regulations 2016 notified by the Council vide
notification number F.No.AB/AICTE/REG/2016 dated 30/11/2016 and norms standards,
procedures and conditions prescribed by the Council from time to time, I am directed to
convey the approval to
Permanent Id 1-463560831 Application Id 1-3330503850
Name of the Institute HINDU INSTITUTE OF
TECHNOLOGY Institute Address INDUSTRIAL AREA, SONEPAT, SONEPAT,
Haryana, 131001
Name of the
Society/Trust
THE SONEPAT HINDU
EDUCATIONAL &
CHARITABLE
SOCIETY,SONEPAT
Society/Trust Address HINDU COLLEGE,ROHTAK
ROAD,SONEPAT,SONEPAT,SONEPAT,Haryana,131 001
Institute Type Unaided - Private Region North-West
Opted for change from
Women to Co-ed and Vice
versa
No Opted for change of
name
No Opted for change of
site
No
Change from Women to
Co-ed approved and Vice
versa
Not Applicable Change of name
Approved
Not Applicable Change of site
Approved
Not Applicable
All India Council for Technical Education (A Statutory body under Ministry of
HRD, Govt. of India)
Nelson Mandela MargVasant Kunj,
New Delhi-110067 PHONE: 23724151/52/53/54/55/56/57
FAX: 011-23724183 www.aicte-India.org
Opted for Conversion from
degree to diploma
No Opted for Conversion from
diploma to degree
No Conversion (degree to
diploma or vice-a-
versa) Approved
Not Applicable
To conduct following courses with the intake indicated below for the academic year 2017-18
Application Id: 1-3330503850 Course
Full
/Par
t T
ime
Affiliatin
g Body
Inta
ke
2016
-17
Inta
ke
Appro
ved
for
2017
-18
NR
I A
ppro
val
sta
tus
PIO
/ F
N /
Gulf
quo
ta/
OC
I/
Appro
val
sta
tus
Fore
ign
Coll
abora
rion/T
win
ing
Pro
gra
m A
ppro
val
stat
us*
Program Shift Level
Application Number: 1-3330503850 Page 1 of 3
Note: This is a Computer generated Report.No signature is required. Letter Printed On:7 April 2017
Printed By : AIC003246
ENGINEERIN G
AND
TECHNOLO GY
1st
Shift
DIPL
OMA
CIVIL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education
120 120 NA NA NA
ENGINEERIN G
AND
TECHNOLO GY
1st
Shift
DIPL
OMA
COMPUTER
ENGINEERING
FULL
TIME
Directorate of
Technical
Education
60 60 NA NA NA
ENGINEERIN G
AND
TECHNOLO GY
1st
Shift
DIPL
OMA
ELECTRICAL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education
60 60 NA NA NA
ENGINEERIN G
AND
TECHNOLO GY
1st
Shift
DIPL
OMA
ELECTRONICS
&
COMMUNICATI
ON ENGG
FULL
TIME
Directorate of
Technical
Education
60 60 NA NA NA
ENGINEERIN G
AND
TECHNOLO GY
1st
Shift
DIPL
OMA
MECHANICAL
ENGINEERING
FULL
TIME
Directorate of
Technical
Education
120 120 NA NA NA
The above mentioned approval is subject to the condition that HINDU INSTITUTE OF TECHNOLOGY shall follow
and adhere to the Regulations, guidelines and directions issued by AICTE from time to time and
the undertaking / affidavit given by the institution along with the application submitted by the
institution on portal.
In case of any differences in content in this Computer generated Extension of Approval Letter,
the content/information as approved by the Executive Council / General Council as available on
the record of AICTE shall be final and binding.
Strict compliance of Anti-Ragging Regulation:- Approval is subject to strict compliance of
provisions made in AICTE Regulation notified vide F. No. 37-3/Legal/AICTE/2009 dated July
1, 2009 for Prevention and Prohibition of Ragging in Technical Institutions. In case Institution
fails to take adequate steps to Prevent Ragging or fails to act in accordance with AICTE
Regulation or fails to punish perpetrators or incidents of Ragging, it will be liable to take any
action as defined under clause 9(4) of the said Regulation.
Note: Validity of the course details may be verified at www.aicte-india.org
All India Council for Technical Education (A Statutory body under Ministry of
HRD, Govt. of India)
Nelson Mandela MargVasant Kunj,
New Delhi-110067 PHONE: 23724151/52/53/54/55/56/57
FAX: 011-23724183 www.aicte-India.org
Copy
to:
1. The Regional Officer,
All India Council for Technical
Education Plot No. 1A, 5th Floor,
DTE(Pb..) Building,
Dakshin Mark, Sector 36-A,
Chandigarh-160 036
2. The Director Of Technical Education**,
Prof. A.P Mittal
Member Secretary, AICTE
Application Number: 1-3330503850 Page 2 of 3
Note: This is a Computer generated Report.No signature is required. Letter Printed On:7 April 2017
Printed By : AIC003246
Haryana
3. The Registrar**, Directorate of Technical Education
4. The Principal / Director, HINDU INSTITUTE OF
TECHNOLOGY INDUSTRIAL
AREA, SONEPAT,SONEPAT,
Haryana,131001
5. The Secretary / Chairman,
THE SONEPAT HINDU EDUCATIONAL &
CHARITABLE SOCIETY,SONEPAT HINDU
COLLEGE,ROHTAK ROAD,SONEPAT,
SONEPAT,SONEPAT,
Haryana,131001
6. Guard File(AICTE)
Note: ** - Approval letter copy will not be communicated through post/email. However, provision is made in the portal for downloading
Approval letter through Authorized login credentials allotted to concerned DTE/Registrar.
Application Number: 1-3330503850 Page 3 of 3
Note: This is a Computer generated Report.No signature is required. Letter Printed On:7 April 2017 Printed
By : AIC003246
All India Council for Technical Education (A Statutory body under Ministry of
HRD, Govt. of India)
Nelson Mandela MargVasant Kunj,
New Delhi-110067 PHONE: 23724151/52/53/54/55/56/57
FAX: 011-23724183 www.aicte-India.org