him son

MFG Setup :: Installation :: Contact :: Enquiry

Home » Profile

Profile

Himson Textile Engineering Industries Private Limited is the flagship company

of the Rs. 4.0 billion Himson group. Himson started its activities about 50 years

ago with only few looms to manufacture quality fabrics. Since then group

activities have grown from strength to strength. Himson first concentrated on

expansion in the loom shed and subsequently dyeing and finishing houses were added for further

growth through forward integrations. Further lace and embroidery units were established as a

move towards complementary diversification. Till this time growth was slow and steady with focus

only on textiles.

1970 Onwards In the seventies, the focus was shifted towards high growth. At this time the company saw the

opportunity of manufacturing synthetic yarn processing machineries, the market for which was

large but untapped. The seeds for this were sow with the commencement of manufacturing of up

twisting and rewinding machines and Himson Textile Engineering Industries Pvt. Ltd. came into

being. We currently manufacturing textile winding machines, textile weaving machines, draw

texturising machines, tfo twisting machines and knitting machines.

1997 Turn over Touches Rs. 3 BillionThe group's turnover started with few millions has increased to Rs. 4.0 billion in 1989-90 and the

turnover Himson textile Engg. Inds. Pvt. Ltd. has increased from Rs. 6.0 Millions in 1974 to Rs. 3.0

Billion in 1996-97.

The company manufactures a wide range of yarn processing machinery from Draw Texturing

Machines to Draw Twisting Machines. Air Texturing Machines, Two for One Twisters for filament

Yarn. Automatic Shuttle changing looms, Rapier Looms and High Speed Circular Knitting Machines.

Ancillary units manufacture precaution spindles high quality Ceramic guides/ Components, PU

Discs and Heaters for DTY / DT machines, Silk Yarn processing machines and Jute Looms.

http://www.himsonoriginal.com/mfg-setup.html

http://www.himsonoriginal.com/index.html

http://www.himsonoriginal.com/enquiry.html

http://www.himsonoriginal.com/enquiry.html#contact

http://www.himsonoriginal.com/installation.html

Tie up with Earnest Scragg U.KSince then there has been no turning back and the company

came on the fast track. But the real momentum growth was

provided in 1978, when Himson tied up with Earnest Sons

Ltd. , UK to manufacture Draw Texturising Machines in India.

Then the strategy was to the best available technology from

abroad and adapting the same to local requirements. This

strategy has been paying well and has made the company

an undisputed leader in synthetic yarn processing

machinery. This has been achieved by capturing almost

85% market share inspite of big competition from leaders.

Leadership in synthetic yarn processing machinery has been accepted by leading POY

manufactures by placing large quantity of machine orders. Himson also enjoys high reputation for

in-house research and technology developments. The real success is due to the efficient and

prompt after sales services to the customers. Himson has captured more than 70% of the

domestic market share to supply synthetic yarn machinery.

Catering Market DemandsThe increase in demand from the hosiery sector led Himson to enter into collaboration with M/S

Camber International of UK in year 1995 to manufacture High Speed Circular Knitting Machines.

Tie up with Teijin Seiki Co. Ltd. Japan.

Himson has entered into a technical collaboration with M/s Teijin Seiki Textile Machinery Co. Ltd.,

Japan in year 1998 to manufacture High speed Draw Texturising Machines, textile winding

machines, textile winder with energy conserving short heaters and auto doffing.

Acknowledgment

We acknowledgment all our success to employees staff, vendors representatives and to our

esteemed clients of all products.

The EmployeesThe company has about 1200 employees on its rolls, of which about 150 (13%) are Management /

Executive staff and 150 are Technical staff. The company has also helped develop about 150

ancillary units owned by qualified engineers. This has helped the company easily absorb the latest

technology and adapt the same to meet the global requirement.

Infrastructure The fast growth has been sustained by installing modern Computerized Numerical Controlled

Machining Centers to achieve highest accuracy and setting up a full equipped R&D Center. Further

is has a high - tech, state of the art Standard Room for verification and calibration of measuring

tools. The Standard Room is equipped with 3D CNC Coordinate Measuring Machine along with

other latest state of art machines & equipments.

Sales NetworkThe company has well - developed sales network with branch offices at Mumbai, Delhi Ahmadabad

and Ludhiana besides a corporate office at Surat. After establishing itself in India the company has

marched forward towards export market and has secured orders against global competition. The

products have been exported to Germany, U.K, Singapore, Malaysia, Africa, Nepal, Indonesia,

Bangladesh, Sri Lanka and China. Export turnover has.

Custom ManufacturingAlthough, we provide our clients with the complete range of yarn processing machineries, we also

undertake orders for customised solutions. Our team of well qualified and experienced technical

staff are capable enough to provide you with the machineries, exacting the minute details and

specifications as required by you.

In other words, we provide you with the complete solution ranging from conceptualisation to the

completion of the project. The highlight of our customised solution is that - prior to the execution

of the project, we erect a 3D model of the machinery having each and every details discussed well

in advance so that the project is executed properly as per the schedule.

Why Us?We have a competitive edge over the rest of the lot and our core strength lies in the following

factors:

State of the art manufacturing unit

Technological tieups with global giants

Product innovation based on local requirements

Team of dedicated workforce

Dynamic pricing policy

On time delivery

Excellent after sales services

Our Products

Draw Texturising Machines

HDS - CX2 | HDS - CX3 | HDS - VX3 | HDS - EX2

TFO Twisting Machines

DT - 3000 | DT - 150 / DT - 115 | DT - 90EN | Twister for Spun Yarn

Winder Machines Cheese Winder HSW- 2 | Cops Winder Machine CLV - DD

Weaving Machines Rapier Weaving Machine - Wonder | Rapier Weaving Machine - Vectra | Rapier Weaving Machine - Winner

Knitting Machines Circular Knitting Machine

http://www.himsonoriginal.com/knitting-machines.html


http://www.himsonoriginal.com/weavingmachines.html#winner

http://www.himsonoriginal.com/weaving-machines.html#vectra1

http://www.himsonoriginal.com/weaving-machines.html#wonder

http://www.himsonoriginal.com/weaving-machines.html

http://www.himsonoriginal.com/winder-machines.html#clv-dd

http://www.himsonoriginal.com/winder-machines.html#hsw-2

http://www.himsonoriginal.com/winder-machines.html

http://www.himsonoriginal.com/tfo-twisting-machines1.html#spun-yarn

http://www.himsonoriginal.com/tfo-twisting-machines1.html#dt-90

http://www.himsonoriginal.com/tfo-twisting-machines.html#dt-150


http://www.himsonoriginal.com/tfo-twisting-machines.html


http://www.himsonoriginal.com/draw-texturising1-ex2.html

http://www.himsonoriginal.com/draw-texturising1-vx3.html

http://www.himsonoriginal.com/draw-texturising-cx3.html




Installation

Committed to provide complete solution, we offer on site installation of the machineries, machine installation services, installation of textile machine. Our team of qualified engineers are capable enough to undertake on site installation and they also provide training to the staff besides free operational assistance. Being a customer focused company, we even undertake greenfield projects right from conceptualisation to its completion. Our excellent customer service has enabled us to carve a unique niche for ourselves in the industry. Today, we boast of a number of projects, which are up and running successfully at various places.

Installation of 14 N0. HDS - EX2 DRAW TEXTURISING MACHEINES

Contact

HimsonContact Person : Mr. Pratik Bachkaniwala

Address : 294, GIDC Pandesara,

Surat, Gujarat -394 221, (India)

Phone No : +(91)-(261)-2898586

Fax No : +(91)-(261)-2891748

E-mail : [email protected],

[email protected], [email protected]

Surat OfficeAddress : A.K. Road, Surat,

Gujarat -394 221, (India)

Phone No : +(91)-(261)-

2551349 / 50, 2544192

Fax : +(91)-(261)-2553013,

2553448

Mumbai OfficeAddress : 61/C Mittal Court, Nariman Point,

Mumbai - 400 021, (India)

Phone No : +(91)-(22)-22875415 / 22845038

Fax : +(91)-(22)-22042202

mailto:[email protected],[email protected]?subject=Himson%20Mail%20Through%20himsonoriginal.com



MFG Setup

We have a philosophy to see things as a whole. We regard the machine as a whole and manufacture

it as whole. At each manufacturing stages the same kind of attention and alertness prevails. Maybe

that's why the final deliverance seem so sweet and perfect.

We have a complete product manufacture cycle and so each production center serve as nerves to

the complete process of manufacturing and ensuring the rigorous checks necessary. The following

product facilitating centers shall give you an idea of magnitude of our manufacturing capabilities.

Designing CAD

AutoCAD with Auto Lips

Pro / Engineer with 3D Modeling Simulation for quick prototyping during design

development

LAN workstations with processing speed 433 Mhz with Window 98

CAM

Part Programme Optimization

DNC Linking of all CNC Machine Tools

Reverse Engineering

Product Application Center (R&D) Prototypes of all machines being manufactured

Quality Control Laboratory with

Uster Evenness Tester

Package Performance Analyzer

Instron Single Yarn Strength Tester

Motorized Wrap Reel

Projection Microscope

Crimp Rigidity Tester

Twist Tester

Hose Knitting Machine

Soxhelt Apparatus

Online Inventory Management MRP-II System Interfaced with Design and Development Control

System

Machine Facilities Flexible Manufacturing System with 19 pallets & 300 tools employing pallet Robot & Tools

Robot

CNC Machining & Turning Centers

CNC Plano Centers

Gear Manufacturing Machines

Jig Boring Machines

Cylindricals & Centerless Grinding Machines

Six Spindles Auto Lathes

CNC Swiss Auto Lathes

Sheet Metal & Fabrication Shop CNC Punch presses / Bending presses

CNC Power presses

Heavy Duty Hydraulic / Mechanical Power presses

Automatic Profile Cutting machine

MIG & TIG Welding machines

Stud Welding Machines

Assembly Shop

Large dust free area

Pneumatic tools for process contro

Hydraulic / Pneumatic presses

Spin Riveting machines

On Load Testing facility

Dynamic Balancing Machines

Metal Finishing Shop

Hard Chrome Plating

Zinc Plating

Electro less Nickel Plating

Robot Operated Ceramic Plasma Coating

Powder coating booths with Conveyeorised oven

Seven Tanks Phosphating process

Sand Blasting chamber

Vibratory Finishing machines

Testing Laboratory

Gas Oxidizing Nit riding Furnish

Quality Control Department

Certification against QMS ISO-9002

3-D Coordinate Measuring Machine

Measuring & Testing Equipments for large size components upto 2000 mm

Standard Room for in-house calibration of Measuring & Testing Equipments

Laser Interferometer for CNC machine Tools Calibration

Helium Leak Detector (Mass Spectrometer)

ISO 9002 Certified Quality System

Maintenance Cell Oscilloscope

PLC Programming Unit

Soldering Station with temperature controller having range of 0 to 450 deg. C

Electronics Dept.

Modern Labs with state of the art equipments

Windows NT Server with 20 nodes networking

Software programmer shaving proficiency in : Assembly, C, C++, VC+ and PLC

programming

Circuit maker for PCB designing

Auto CAD R-14 for detailed engineering

PCB Assembly and manufacturing

Electrical Panel assembling

Products

We manufacturer and supply textile knitting machine, industrial knitting machine, draw texturising machines, TFO twisting machines, winder machines, weaving machines, knitting machines.

Draw Texturising MachinesHDS - CX2 HDS - CX3 HDS - VX3 HDS - EX2

VIEW MORE DETAILS

TFO Twisting MachinesDT - 3000 DT - 150 / DT - 115 DT - 90ENTwister for Spun Yarn

VIEW MORE DETAILS

Winder MachinesCheese Winder HSW- 2 Cops Winder Machine CLV - DD

VIEW MORE DETAILS

Weaving MachinesRapier Weaving Machine - Wonder Rapier Weaving Machine - VectraRapier Weaving Machine - Winner

VIEW MORE DETAILS

Knitting MachinesCircular Knitting Machine

Spare & Service

The decades of experience we have in manufacturing machinery and the after sales support has

constituted a lot in our being the market leaders. Our product textile machine spare parts and textile

machine spares have becomes long lasting due to our sales support policy which adhere to one

moral line and that is : the customer should always have smile on his face when doing business with









http://www.himsonoriginal.com/winder-machines.html#clv-dd

http://www.himsonoriginal.com/winder-machines.html#hsw-2



















us.

Types of Services which we offer: Spares available for all Himson's product

Various sales & services office in the country, serves customers immediately by providing

spares & technical services.

Our team of trained technicians can reach customer site within 24 hours in the entire

country.

We take up the job of setting and upgrading of old Himson/ Scragg make machines.

With well - equipped product application center, we offer our prototype machine for

conducting various trails for the customer for developing their various products.

Sales Network

The company has well - developed sales network with branch office at MUMBAI, DELHI, AHMEDABAD

and LUDHIANA besides a corporate office at Surat. After establishing itself in India the company has

marched forward towards export market and has secured orders against global competition. The

products have been exported to Germany, U.K., Singapore, Malaysia, Africa, Nepal, Indonesia , Bangladesh, Sri Lanka and China. Export turnover has increased from Rs. 0.3 million in 1987 to Rs. 300 million in 2000.

CORPORATE OFFICEWORKS SILVASSA

Hiralal Colony,

A.K. Road,

Surat - 395008

Tel : +91-261-2553013

KIM

At Post Mota Borvana,

Tal : Mangral, Dist. - Surat,

A.K. Road, Surat - 395008

S.No. 128/P, Pragati Ind. Estate,

Village Amli, Silvassa - 395008 (D.N.H.)

Surat - 395008


We manufacture superior quality draw texturising machines that are used for imparting certain

useful properties in man-made yarn. These machineries ensure consecutive processing into ready

textile goods with high service characteristics. High in efficiency, our range of draw texturing

machines are available in variety of specifications and models.

HDS - CX2 : HDS - CX3 : HDS - VX3 : HDS - EX2




HDX - CX2

FeaturesThe HDS CX2 is classic straight thread line 'C' configuration machine with all invertor controlled low

guide wrap reduce the yarn tension in the texturising zone which ensures the satisfactory

processing of the finer an coarser denier yarn.

Heater and ccaling tracks are installed vertically aver the machine.

Specifications(a) Main Specifications

1) Products : Polyester 30-300 denier

2) Number of Positions : 240/264/288/312

3) Mechanical Speed : 400-1000 m/min

4) Draw Ratio : Optional setting value within the above speed Range.

5) Direction af Twist : All "Z" or all "S" or alternate "Z" and "S"

6) Dimensions : 4150 mm Height

: 5880 mm width (width over Box Creel)

: 6540 mm width (width over Rotary Creel)

: 21345 mm length (Door Closed)

(b) Utility Electricity

1) Electricity : Motor & Heater circuit

: AC 415V ± 2.5%, 50 HZ ± 0.5 HZ,

: 3 phase plus neutral supply voltage

: Earth + GND + Neutral (for safety and noise suppression)

: Motor Max. 103.1 KW

: Heater Max. 84.5 KW

: Total Max. 187.6 KW

2) Cooling air for panels : Fan Cooling

3) Air condition

(Recommendation):

Room temperature : 26± 2 0C

Humidity : 65%±5%

(c) 1st Heater - 26 Block / Machine

a) Heating System : Vapor Phase Heater

b) Heater Length : 1600 mm

c) Rated Output : 2.40 KW / Block

d) Temperature Range : 1600C - 2500C

(d) 2nd Heater - 13 Block / Machine

a) Heating System : Vapor Phase




(e) Cooling Zone - 156 Sets / Machine

a) Cooling Zone Length : 1.25 mt

(f) Twisting Unit - 312 Sets / Machine

a) Type : HITWIST - 1 Trialxial frication unit

b) Working disc : Polyurethane Dies Ø 54.5 X 9 mm.

c) Disc configuration : Standard supply Polyurethane disc -1-4-1

(g) Feed Rolls - 312 Sets / Machine

a) Nip System : Pressure Roll System

b) Yarn Traverse : Fitted at all feeds

(h) Take-up Unit - 312 Sets / Machine

a) Type : friction drive (HPS)

b) Axial & radial

disturbance: Standard (H-Frame Type)

c) Biconical angle : 30 or 90 or 180 (90 at delivery)

d) Transverse length : Max. 250 mm

e) Package diameter : Max. 265 mm

f) Package brake : Automatic braking to aid doffing.

(i) Oiling Device - 1 Sets / Machine

a) Type : Grooved lick roller

b) Roll revolution :Standard Range 2 to 7 rpm

Optional Range 4 to 22 rpm

(j) Fume Exhaust - 1 Sets / Machine

a) Place of Installation : From Top and Bottom of 1st heater

(k) Yarn Suction - 1 Sets / Machine

a) Suction System : By suction blower

b) Blower Motor : 7.5 KW

c) Tank for waste Yarn : off end side

(l) Cutter - 312 / Machine

a) Cutter : Yarn end holding type

b) Place of Installation : before the 1 FR

(m) Detector - 312 / Machine

a) Detector : Non contact type (Himson SD3)

b) Place of Installation : Between the 3 FR and the OLR

(n) Drives & Connected Power

a) Driving system : 1 set / Machine Individual drive system

b) Motors

Input : 05.50 KW X 2 sets / Machine 11.00 KW - Inverter Drive

Int : 15.00 KW X 1 sets / Machine 15.00 KW - Do-

Output : 11.00 KW X 1 sets / Machine 11.00 KW - Do-

Take up bowl : 11.00 KW X 1 sets / Machine 11.00 KW - Do-

Traverse : 11.00 KW X 1 sets / Machine 11.00 KW - Do-

Twist unit : 15.00 KW X 2 sets / Machine 30.00 KW - Do-

Ancillaries : 02.20 KW X 1 sets / Machine 02.20 KW

Fume exhaust : 01.50 KW X 2 sets / Machine 03.00 KW

Yarn suction : 07.50 KW X 1 sets / Machine 07.50 KW

Total 103.10 KW

c) 1st Heater : 64.40 KW

d) 2nd Heater : 22.10 KW

Total 84.50 KW

(p) Creel Stand - 1 Set / Machine

Standard Box Creel for POY size Ø 435 mm max.

Optional Rotary Creel.

(q) Electrical Control System - 1 Set / Machine

a) Computer Control : Micro Processor based control system for

System P.C. a) Feed roller speed control

b) Heater temperature control

c) Setting and running condition

(r) Battery back-up System

Customer's Scope : Batteries

Connecting Cable

Accessories

Battery Stands


We manufacture superior quality texturising machinery, twisting machinery that are used for

imparting certain useful properties in man-made yarn. These machineries ensure consecutive

processing into ready textile goods with high service characteristics. High in efficiency, our range of

draw texturing machines are available in variety of specifications and models.

Next »






HDX - CX3



2) Number of Positions : 240/264/288/312







: 21345 mm length (Door Closed)

(b) Utility Electricity


: AC 415V ± 2.5%, 50 HZ ± 0.5 HZ,







3) Air condition

(Recommendation):

Room temperature : 260C±2 0C

Humidity : 65%±5%

(c) 1st Heater - 26 Block / Machine

a) Heating System : Vapor Phase Heater




(d) 2nd Heater - 13 Block / Machine








a) Type : HITWIST - 1 Trialxial frication unit

b) Working disc : Polyurethane Dise Ø 54.5 X 9 mm.

c) Disc configuration : Standard supply Polyurethane disc -1-4-1





a) Type : friction drive (HPS)

b) Axial & radial

disturbance: Standard (H-Frame Type)

c) Biconical angle : 30 or 90 or 180 (90 at delivery)

d) Tranverse length : Max. 250 mm

















a) Detector : Refers Sales Questionnaire No.SQ-008 point no.(13) e.




b) Motors

Input : 05.50 KW X 2 sets / Machine 11.00 KW - Inverter Drive

Int : 15.00 KW X 1 sets / Machine 15.00 KW - Do-

Output : 11.00 KW X 1 sets / Machine 11.00 KW - Do-

Take up bowl : 11.00 KW X 1 sets / Machine 11.00 KW - Do-


Twist unit : 15.00 KW X 2 sets / Machine 30.00 KW - Do-




Total 101.70 KW



Total 66.30 KW

(p) Creel Stand - 1 Set / Machine










Connecting Cable

Accessories

Battery Stands


We manufacture superior quality texturising machine, draw twisting machine that are used for








HDS - VX3



2) Number of Positions : 240/264/288







: 23020 mm length

(b) Utility


: AC 415V ± 2.5%, 50 HZ ± 0.5 HZ,






2) Compressed Air :5.5 bars x 70 CFM for 2 aspirators

Air requirement for interlacing nozzles as per jet used.


4) Air condition

(Recommendation):

Room temperature : 26oC± 2oC

Humidity : 65%±5%

(c) 1st Heater - 24 Blocks / Machine



c) Rated Output : 2.40 KW / Block (Optional 2000 mm)

d) Temperature Range : 160oC - 250oC

(d) 2nd Heater - 12 Blocks / Machine

a) Heating System : Vapor Phase heater






b) Type : Forced Cooling


a) Type : HIMTORO-4 Tri-axial disc frication disc unit

b) Working disc : Polyurethane Ø 59 mm X 9 mm thick.

c) Guide Disc : Solid Ceramic

c) Disc configuration : 1-4-1 (Standard supply)





a) Type : Friction Drive (HPS)

b) Axial disturbance : Mechanical settable unit

c) Biconical angle : 3o or 9o or 18o (9o at delivery)




(i) Oiling Device - 1 Set / Machine




(j) Fume Exhaust - 1 Set / Machine

a) Place of Installation : From Top and Bottom of 1st heater & Cooling Plate

(k) Yarn Suction - 1 Set / Machine



c) Tank for waste Yarn : Off End side





a) Detector :




b) Motors

Input (1 FR) : 05.50 KW X 2 sets / Machine 11.00 KW - Inverter Drive

NFR : 15.00 KW X 1 sets / Machine 15.00 KW - Do-

Intermediate (2 FR) 11.00 KW X 1 sets / Machine 11.00 KW - Do-

Output (3 FR : 11.00 KW X 1 sets / Machine 11.00 KW - Do-

Take up bowl (WR) : 11.00 KW X 2 sets / Machine 11.00 KW - Do-


Twist unit (TU) : 18.50 KW X 2 sets / Machine 37.00 KW - Do-

Ancillaries (Max.) : 02.20 KW X 1 sets / Machine 02.20 KW


http://www.himsonoriginal.com/draw-texturising1-vx3.html#top%23top


Total 122.20 KW



Total 86.40 KW

(o) Maintenance Platform & Ladder 1 Set / Machine

For cleaning & Maintenance of 1st Header

(p) Maintenance Platform & Ladder 1 Set / Machine










Connecting Cable

Accessories

Battery Stands


We manufacture superior quality texturising machine, draw texturising machine that are used for








HDS - EX2



2) Number of Positions : 240/264/288






: 19940 mm length (Door closed)

(b) Utility


: AC 415V ± 2.5%, 50 HZ ± 0.5 HZ,






2) Compressed Air : 5.5 bar x 70 CFM for Suction Gun (Customer's Scope)

3) Cooling air for panels Fan Cooling

4) Air condition

(Recommendation):

Room temperature : 26oC± 2 oC

Humidity : 65%±5%

(c) 1st Heater - 120 Blocks / Machine

a) Heating System : Non Contact Electrical Heater

b) Heater Length : 0.95 m



(d) 2nd Heater - 10 Blocks / Machine

a) Heating System : Thermosyphon heater

b) Heater Length : 1.46 mm




a) Cooling Zone Length : 1.84 m

b) Type : Forced Cooling


a) Type : HIMTORO Triaxial discretion disc unit

b) Working disc : Polyurethane Ø 59 mm X 9 mm thick.

c)

Solid Ceramic

Input 6 Disc - Round type Ø 58 mm

Output Disc - Knife type Ø 55 mm

http://www.himsonoriginal.com/draw-texturising1-ex2.html#top%23top

d) Disc configuration : 1-7-1





a) Type : Friction Drive (HPS)

b) Axial disturbance : 15 mm

Biconical angle : 3o or 9o or 18o (9o at delivery)



f) Package brake : Attachment











d) Compressed Air

Assisted Suction

Gun for yarn threading





a) Detector : Non contact type (Himson SD3)




b) Motors

Input (1 FR) : 05.50 KW X 2 sets / Machine 11.00 KW - Inverter Drive

Intermediate (2 FR) : 15.00 KW X 1 sets / Machine 11.00 KW - Do-

Output (3 FR) : 11.00 KW X 1 sets / Machine 11.00 KW - Do-

Take up bowl (WR) : 11.00 KW X 1 sets / Machine 11.00 KW - Do-


Twist unit (TU) : 18.50 KW X 2 sets / Machine 37.00 KW - Do-




Total 107.20 KW



Total 144.00KW

(o) Creel Stand - 1 Set / Machine

Maintenance Platform & Ladder 1 Set / Machine

(p) Electrical Control System - 1 Set / Machine










Connecting Cable

Accessories

Battery Stands


Our range of Two For One (TFO) twisting machines are ideal for providing low and medium twist to a

wide range of yarns and differential counts. These machines are easy to operate and provide speedy

setting of spindle revolution rate. Engineered to precision, our twisters are highly energy efficient

and produce less noise. We offer twisters in various models with different twisting levels as per the

needs of customers.

Next »

DT - 3000: DT - 150 / DT - 115: DT - 90 EN : Twister For Spun Yarn





http://www.himsonoriginal.com/tfo-twisting-machines1.html

DT - 3000

Features Equipped with best quality spindles.

Most suitable for producing low & medium twist yarn of polyester, Nylon, Polypropylene and

other filament.

Adjustment ceramic overfeed roller speed for variety of yarn and twist range.

Considerable savings in power and labour cost due to its well designed drive arrangement

and ergonomic layout.

Individual Taper Mechanism gives precise build packages.

Sturdy and robust machine structure gives vibration free operation.

SpecificationsModel : DT-3000

Spindle pot : dia 220 mm / 170 mm

Spindle pitch : 340 mm

Section pitch : 1400 mm

No. of deck : Single

No. of spindle/section : 8 (4 x 2)

No. of section : 12

No. of spindles : 96

Max. mech. Spindle

speed: 10,000 R.P.M.

Spindle drive system : Tangential belt

Twist range : 60-1500 T.P.M.

Direction of twist : 'S' or 'Z' Twist changeable

Take up package dia : 250 mm

Traverse length : 250 mm

Take up tube : dia 69 x 290L or dia 57 x 290L

Mechanical yarn speed : 200 mts/min. Maximum

Technological speed : 150 mts/min. (Depending on denier & T.P.M.)

Feed package : dia 210 x 290L

Feed package fixing

method: Magnet type

Installed power : 18.5 Kw

Starting method : Soft starter for smooth starting

Tensor : Tube tensor ball type

Take up tension : Adjustable by the over feed roller speed

Machine dimension (in

mm.): (For 96 Spindles)

Height : 1685

Width : 1155

Length : 19010

» request a quote

http://www.himsonoriginal.com/enquiry.html?code=TFO+Twisting+Machines+DT+-+3000

DT - 150 / DT - 115

FeaturesState of the art individual shaft driven inverter controlled two for one machine series. All parameters

are settable through MMI making operations of the machine overly simplified. Precision control of all

parameters give excellent control over entire machine operation giving world-class yarn quality.

Equipped with best quality spindles.

Most suitable for producing low & medium twist yarn of polyester, Nylon, Polypropylene and

other filament.

Adjustment ceramic overfeed roller speed for variety of yarn and twist range.

Considerable savings in power and labour cost due to its well designed drive arrangement

and ergonomic layout.

Individual Taper Mechanism gives precise build packages.


Specifications

Model DT-150 Spindle Pot Ø150S DT-115 Spindle Pot Ø115

Spindle pot DT-150 DT-115

Spindle pitch Ø150mm Ø115mm

Section pitch 285 mm 230 mm

No. of deck 1830 1450

No. of

spindle/sectionSingle Double

No. of section 12 (6x2) 24 (6) (2x2)

No. of spindles 10 12

Max. mech.

Spindle speed10000 HPM 286

Spindle drive

systemTangential belt 13500 RPM

Max.

Mechanical

speed

80-300 Denier 80-300 Denier

Denier Range 100-5000 TPM 170 mts/min.

Twist Range 'S' or 'Z' Twist changeable 20-300 Denier

Direction of

twist210 mm 100-3000 TPM

Take up

package dia200 mm 'S' or 'L' twist changeable

Traverse

lengthØ69x230L Ø57x330 210 mm

Take up tube Individual Taper Ø69x170L or Ø57x1701

Tapering

Mechanism150 mts/min. Individual Taper

Technological

speedØ145x£90L cheese 170 mts/min

Feed package Magnet type Ø110x290L cheese

Feed package

fixing methodTube tension ball type Magnet type

Tensioner Tube tension ball type

Install Power 11.25 Kw (15 H.P.) or 18.75 kw (25 H.P.)

Power detailsInverter controlled, set through

MMI

Inverter controlled, set through

MMI

Take up 2 H.P. 2 H.P.

Over feed 2 H.P. 2 H.P.

Spindle Drive 12.5 H.P. 12.5 H.P.

Traverse 2 H.P. 2 H.P.

ControlsAll controls on MMI. All parameters

car set through Micro Processors

All controls on MMI. All parameters

car set through Micro Processors

Take up

tension

Adjustable by the over feed roller

speed

Adjustable by the over feed roller

speed

Machine

dimension

Height

1730 mm (5'-7') 2360 mm (7'-7')

Width 960 mm (1960 mm with door 960 mm (1960 mm with door

opening) opening)

Length20760 mm (21640 mm with door

opening (6S'-r) (71'')

19500 mm (20380 mm with door

opening) (63'-10'') (66'-9'')

Starting

MethodSlow start (By the star delta) Slow start (By the star delta)

Option Take up with 230 mm. Length

Tube

Take up with 230 mm. Length

Tube


Our range of Two For One (TFO) twisting machines, two for one twister machines are ideal for

providing low and medium twist to a wide range of yarns and differential counts. These machines

are easy to operate and provide speedy setting of spindle revolution rate. Engineered to precision,

our twisters are highly energy efficient and produce less noise. We offer twisters in various models

with different twisting levels as per the needs of customers.

« Back

DT - 3000: DT - 150 / DT - 115: DT - 90EN : Twister For Spun Yarn






DT - 90EN

FeaturesIn continuous Endeavour to serve the best technology to the industry, Himson has not developed a

very low cost, state of the art and most economical TFO of it's kind with almost all the features

available in world class machines.

Main Features Most suitable for producing high twist yarn of Polyester, Nylon and other sensitive

synthetics yarn like

Microfilament as well.

Considerable savings in power, labour and land & building cost. · Low yarn wastage

Adjustable overfeed roller speed for producing desired package density.

Complete ceramic thread path for superior yarn quality


Specifications

Model DT-90 RN-135 DT-90 RN-155

Spindle pot 90 mm 90 mm

No. of spindle 320 352 384 416 448 308 336 364 392 420

No. of sections 10 11 12 13 14 11 12 13 14 15

Length of machine

meter 14.7 16 17.3 18.6 20 16 17.3 18.6 20 21.2

Length of machine

feet 48 52.5 56.75 61 65.6 52.5 56.75 61 65.6 69.5

Connected power

(HP)15 15 15 20 20 15 15 15 20 20

Spindle pitch 155 mm 178 mm

Section pitch 1305 mm 1305 mm

Spindle/Section 32 (8x2x2) 28 (7x2x2)

Max. mech.

Spindle speed16000 RPM 16000 RPM

Spindle drive

systemTangential belt Tangential belt

Twist Range 800-4000 TPM 800-4000 TPM

Direction of

twist"S" or 'T' twist changeable "S" or 'Z' twist changeable

Take up

package Up to 750 gms. Up to 850 gms.

Traverse

length127 mm 145 mm

Take up Paper tube 135L x 57 dia./69 dia. Paper tube 155L x 57 dia./69 dia.

Yarn take up

speed Roll 135L x flange dia. 135 Roll 155L x flange dia. 150

(depending on

Denier & TPM)Up to 45 mts./min. Up to 45 mts./min.

Feed package 85mm dia x 240L or 270L tube 85mm dia x 240L or 270L tube

Feed package

fixing Magnet type Magnet type

Starting

method Slow start by star delta Slow start by star delta

Tansloner Tube tension ball type Tube tension ball type

Take up Adjustable by the over feed roller Adjustable by the over feed roller

tension speed speed

Machine Width (up to 40%) (up to 40%)

Machine height 550 mm (1'-8') 550 mm (1'-9')

Production

capacity1780 mm (5'-10') 1780 mm (5'-10')

RPM.Production/S

PDL/Day (kgs)RPM.

Production/S

PDUDay (kgs)

16000 5.12 x Denier/TPM 16000 5.12 x Denier/TPM



» request a quote

http://www.himsonoriginal.com/enquiry.html?code=TFO+Twisting+Machines+DT+-+90+EN

Twister For Spun Yarn

FeaturesHimson has always combined expertise and latest technology to meet the customers demands.

Pursuing such a commitment, and inconsonance with the latest trends and needs, it offers a wide

range of Two-for-One Twisters. Having opened new avenues in the production and sales of a variety

of world-class filament yarn processing machines, it now edges forward with the introduction of Two-

for-One twister model DTS-150, especially designed to serve vast Spun Yarn Textile Industries, its

range of Characteristic, comprise high productivity, less power consumption, easy operations and

less maintenance.

These high standard twisters are capable of achieving incredible tasks with regards to twisting of an

extensive range of yarns, from very coarse, to yield high-grade knotless yarns of wool, acrylic,

rayon, polestar, cotton and their blends. Stable twisting or knotless yarns allow higher efficiency in

subsequent processes and result in commendable high quality woven and knit fabrics.

DTS-150 Twisters guarantee

High quality of the yarn

High quality of package

High quality of the machine

The perfectly balanced spindle, produces high quality of the yarn which depends on the optimization

of the elements and technological parameters such as optimization of the ballon tension.

A significant characteristic of DTS-150 is high quality package building through precisely built gear

box. Fully oil-immersed cam and gear with axial and radial disturbance, precise sheet-metal cradles

with spring damping produces even density package. Optionally, fully inverter drive with servo

traverse system, settable through MMI can be also provided.

A single endless belt driving of this twister offers

Constant twist on the yarmclue to drive belt/pulley with contact area.

Constant twist on the yarn between two spindles.

Lack of impact on the rotation parts due to the structure of the joint less drive belt.

Minimum spindle down time on belt replacement

Reduced energy consumption & noise level due to the use of strategically balanced spindles

manufactured in technical collaboration with M/s. MTS-Italy.

These twisters, a product of intellectual vision and know-how have taken into consideration, every

vital detail. They have the entire yarn path equipped with ceramic guides to avoid excess abrasion

to the yarn reserve disc is plasma coated to increase the abrasion resistance.

DTS-150 TFO Twisters enjoy an ergonomic design, that incorporates a whole spectrum of

international standard features, and also requires minimum maintenance.

SpecificationsModel: DTS - 150

No. of Spindle : 192 maximum

No. of Spindle per section : 6x2-12

No. of Section : 16

Spindle Pitch : 240mm

Spindle Length : 1444mm

Spindle Speed Mechanical : 15000 R.P.M.

Tri Range : 3.5 to 50

Tom Range : 157 to 2000

With Balloon Limiter :

Cound Range (NE) : 2/10 to 2/80

Cound Range (MM) : 2/20 to 2/130

Without Ballon Limiter :

Cound Range (NE) : 2/15 to 2/80

Cound Range (MM) : 2/24 to 2/130

Twist Direction : "S" & "Z"

Tension Device : Capsule

Spindle Device : Tangential Belt with Foot Barke System

Motor H.P : 50 H.P.

Starting System Slow Start by Star Delta

Feed Package : Assemble Wound on Cheese

Traverse Length : 6".152mm

Net Wt. of Feed Package : 1000gms

Take-up Package :

Take-up : Cheese or Cone up to 50 -57'

Max. Package Dia : Max.285mm

Take-up Package wt : Max.3kg

Depends on Count :

Machine Dimension

Height: 1700mm (5-6")

Width : 850mm (2'-8')

Length : 25500mm (83'-7'192 sp.)

Winder Machines

Our range of cheese winder machine are ideal for winding variety of fabrics such as dyed and/or

grey nylon, polyester, polypropylene and other filament yarns. These machines provide accurate

control of spindle revolution and speed of traverse with built in inverter. Easy to operate, our winder

machines reduce the friction while winding and hence quality of yarn is improved. Our winder

machines are available in variety of models.

Cheese Winder HSW- 2 : Cops Winder Machine CLV - DD

http://www.himsonoriginal.com/winder-machines.html#clv-dd%23clv-dd

http://www.himsonoriginal.com/winder-machines.html#hsw-2%23hsw-2

Cheese Winder HSW- 2

Main Features Most suitable for producing precision wound packages.

Ideally suitable for dyed and/ orgrey Nylon, Polyester, Polypropylene and other filament

yarns.

Feed packages of cones, cheese, dye packages, cops and twisted yarn packages.

Highly precise traverse boxes gives winding speed up to 700 mts/min.

Anti pattering and ribbon breaking mechanism for producing best quality packages.

Gate tensioners for uniform tensioning.

Take up package weight up to 2 kgs.

Can adopt intermingling jets for producing assembly wound yarns up to 3 ply.

Lick rollers type oiling system.

Sturdy and robust machine structure gives vibration free operation. Specifications

Model HSW-2 HSW-2C HSW-2 OP

(A) No. of position 48/72 48/72 48/72

(B) No. of position/section

8 position 8 position 8 position

(C) No. of section 6 to 9 6 to 9 6 to 9

(D) Section pitch 1400 mm 1400 mm 1400 mm

(E) Spindle gauge 340 mm 340 mm 340 mm

(F) Max. mech. speed Up to 700 m/min. Up to 700 m/min. Up to 700 m/min.

Machine Dimension

(A) Overall (Door open) 14075 mm 14075 mm 14075 mm

(B) Overall (Door Closed)

13425 mm 13425 mm 13425 mm

(C) Width (Door open) 2490 mm 2490 mm 2490 mm

(D) Width (Door closed) 1300 mm 1300 mm 1300 mm

(E) Height (with hank) 1750 mm 1750 mm 1750 mm

Take up Package

(A) Type Individual bi-conical cheese

Pineapple cone Bi-conical/straight cheese

(B) Tube length 290 mm or 230 mm 230 mm 290 mm / 230 mm

(C) Tube ID Dia 69 mm x 57 mm bull nose or 57 mm x 45 mm bull nose

71.5 mm Dia. 69 mm x 57 mm (spring)

(D) Tiraverse 250 mm or 100 mm 195 mm 230 mm (Dye Sprilfg) mendreliss cradle with pressure compensator

(E) Cradle -

(F) Conicity Parallel 330' Parallel

(G) Max. package Dia. 200 150 200

(H) Taper angle 12°, 16°, 24° 12°, 16°, 24° 4, 8

(I) Crossing ratio Through inverter Through inverter Through inverter

Diling Device

(A) R.P.M. Serrated lick rollers Serrated lick rollers

(B) Type 5,8,11,13,17 5,8,11,13,17 Change by the sprocket individual roller & oil pump with lick roller separately driven through reduction motor. Ceramic coated hard chrome roller & separator guide. Driven through invertor % over feed range 0 to 40%

Overfeed Drive

(A) Type -

(B) Drive -

Supply Package

(A) Type Dye spring/cop/cone/cheese

Dye spring/cop/cone/cheese

Hank dia 600mm/cop/cone/cheese

(B) Max. tube height 440 mm 440 mm 440 mm

(C) Max. cheese dia 320 mm 320 mm 320 mm

Processing Speed

(A) Speed Up to 700 m/min. (through invertor)

Up to 700 m/min. (through invertor)

Up to 600 m/min. (through invertor)

(B) Denier Range 30-300 30-300 30-300

(C) CPM 0 to 350 (through invertor with electronic ribbon breaker)

0 to 350 (through invertor with electronic ribbon breaker)

-

» request a quote

http://www.himsonoriginal.com/enquiry.html?code=Cheese+Winder+HSW-+2

Cops Winder Machine CLV - DD

Features

Himson cops winder model CLV DD is the most economical solution for producing best wrap wound

supply packages for TFO's.

With micro-processor controlled invertor driven spindle derive is capable of producing packages of

constant tension & take up speed.

Precisely built ball screw traverse gives vibration free motion of traverse rall for producing stepless

packages of 30-300 De to suit diverse requirements.

SpecificationsNo. of spindles : 26/36/46/56/66/76 (winding positions 52/72/92/112/132/152)

Type : Double deck both sided

Spindle Gauge : 240 min.

Max. spindle speed : up to 5000 RPM

No. of spindles/section (end section)

: 8 spindle/section

No. of spindles/section (intermediate)

: 10 spindle/section

Yarn speed : up to 500 m/min.

Tension control :By invertor drive with constant reduction in spindle speed to get uniform tension through encoder

Max. stroke length : up to 300 mm adjustable

Max. Dia of take up package : 150 mm

Weight of take up package : Max. up to 1 kg.

Weight of take up package : Max. up to 1 kg.

Cop size :270 mm long x 36.8 mm ID (90 mm pot dia) 240 mm long x 32 mm ID (70 mm pot dia)

Type of supply package : Cheese / Cop / Cone

Max. dia of supply package : 220 mm

Traverse Drive : Electro-mechanical with precision ball screw (PLC controller).

Tensoner : Gate type tube tensioner with compensator

Denier Range : 30 to 150

Type of winding : Warp wound / weft wound / combination wound

Power (Installed) : 5 H.P. for main drive (56 spindles) 1 H.P. for traverse drive

Weaving Machines

Textile weaving machine like rapier weavers are specially designed to fulfill the textile industry's

requirements in regard to quality and performance. With our range of weaving machines virtually

any yarn can be woven including cotton, linen, glass fibers, jute, fancy yarns and more. High in

functionality, these machines consume less power and are maintenance free.

Next »

Rapier Weaving Machine - Wonder : Rapier Weaving Machine - Vectra : Rapier Weaving Machine - Winner





http://www.himsonoriginal.com/weavingmachines.html

Rapier Weaving Machine - Wonder

FeaturesLow cost cam beat up machine with unique design of single cam box and false Rapier drive,

specially designed for clecentralined weaving sector.

Heavy construction with steel cross-binders ensures vibration free operation even at higher speed.

Special wide width Rapier Taper will ensure weavability of all kinds of fibers. Medium to heavy fabric

with excellent cover-tactoris the specialty of this machine.

Yarn Types & Counts Range

Spun yarn of Natural & Man-made Fiber-Nm 200-3 (Ne : 120-1:8)

Filament yarn continuous or Texturized 20 den - 2000 den.

Various types of Blended, Metallic (Lumex), Glass fibers, Jute & Fancy yarns.

The superior metallurgical construction with Cast Iron side frames & cross members ensure

the smooth & reliable operation without any vibrations which can be handled by even

unskilled or conventional loom operator.

It offers shed formation possibilities by positive Tappet (for plain weave), Cam motion, Dobby (16-24 jacks) or Jacquard shedding system.

Reed Space A L

65'' (1600) 2250 4400

75'' (1900) 2550 4700

86'' (2200) 2850 5000

Specifications

Model Wonder

Speed Up to 250 RPM

Nominal Working

Width75''

Shedding

(Standard)Tappets

Shedding (Optional) Dobby/Jacquard/Cam Motion

Reed Motion Cam Driven (one side Gear Box)

Rapier Drive Motion Double band flexible

Left-off Motion Positive with Auto Control

Weft Selection Up to 8 colour

Weft Selection

Mode Programmable with Micro Processor control

Weft Detection Electronical (slide sensor)

Warp Stop Motion 6 Row Electro-Mechanical

Selvedges Leno Selvedge

Installed Power 3 HP 3 Phase Electro-Magnetic brake motor

» request a quote

http://www.himsonoriginal.com/enquiry.html?code=Repair+Weaving+Machine+-+Wonder

Rapier Weaving Machine - Vectra

FeaturesA state of the art cam driven, dwell sley, high speed weaving machine with an unequalled techno-

economic feasibility to get the best of everything in the simplest way the result of many efforts.

Thanks to its well conceived simple, state of art ergonomic design which guarantees sustained

quality & flexibility for weaving Textile articles like shirtings, Dress Materials, Furnishing, Fabrics or

any other fashion fabrics made not only from Cotton, Wool, Man made Fiber & their blends but also

from the delicate Silk, Metallic yarn, Fancy yarn etc.

Yarn Types & Counts Range

Spun yarn of Natural & Man-made Fiber-Nm 200-3 (Ne : 120-1:8)

Filament yarn continuous or Texturised 20 den-2000 den.

Various types of Blended, Metallic (Lumex), Glass fibers, Jute & Fancy yarns.

The superior metallurgical construction with steel side frames & cross members ensure the

smooth & reliable operation without any vibrations which can be handled by even unskilled

or conventional loom operator.

It offers shed formation possibilities by, Cam motion, Dobby (16-24 jacks) or Jacquard shedding system.

Reed Space A L

65'' (1650) 1978 4500

75'' (1900) 2232 4700

Specifications

Model Vectra

Speed Up to 400 RPM

Nominal Working

Width170 cm, 190 cm, 220 cm

Shedding

(Standard)Tappets


Reed Motion Conjugated Cam Driven


Left-off Motion Positive with Auto Control / Electronic optional.

Take-up Motion Continuous

Weft Selection Up to 8 colour

Weft Selection

Mode Programmable, Micro Processor control

Weft Detection Electronical (slide sensor)




Weaving Machines

Rapier weavers are specially designed to fulfill the textile industry's requirements in regard to

quality and performance. With our range of weaving machines like rapier weaving machines and

rapier weaving machinery virtually any yarn can be woven including cotton, linen, glass fibers, jute,

fancy yarns and more. High in functionality, these machines consume less power and are

maintenance free.

« Back


Rapier Weaving Machine - Wonder : Rapier Weaving Machine - Vectra : Rapier Weaving Machine - Winner





Rapier Weaving Machine - Winner

Features Unique crank-fold system for terry-weaving with semi positive pile beam attachment makes

Winner XLT Plus an ideal terry-weaving machine.

Rigid cast-iron construction & ergonomically designed machine guarantees

smooth weavability for terry-weaving with excellent control on pile height adjustment machine can be equipped for electronic let-off, Dobby shedding and jacquard shedding with card saving device.

Reed Space A L

68'' (1700) 2275 4075

76'' (1800) 2720 4520

86'' (2200) 2975 2975

Specifications

Model Winner XL T Plus

Speed Up to 200 RPM

Nominal Working

Width150, 190, 230 CM

Shedding

(Standard)Tappets


Reed Motion Crank type Fast Reed


Left-off Motion Semi Positive with Auto Control

Pilo Beam Let-off Semi-Positive Auto-Controlled

Take-up Motion Pickles Type

Reed Motion Crank Fold Type

Pile Height 2 to 10 mm

Weft Selection 06 Colour for (Jacquard Shedding)

Weft Selection 08 Colour Programmable (for Dobby Weaving)

Weft Detection Mode Mechanical




Knitting Machines

We offer quality knittings machines that provide excellent stitch and finish. Variety of knitwears with

innumerable pattern can be produced using these machines. These machines are fully automated

and are designed for perfect accuracy. Fitted with adjustable drives for speed control, our range of

knitting machines are available with variety of optional accessories.

CIRCULAR KNITTING MACHINE

Specifications

The Quattro III SystemStandard Features

Electronic needle fault detection

handrack unit

Uniwave element + cam lubrication

Three sets of inch 'stop' start buttons

Safety door switch · Timed internal needle + sinker blower system

Digitally controlled AC drive

Bottom blower and top fans (Lint removal)

Collective stitch cam adjustment

Digital display unit featuring : Run speed display, roll size stop, shift counter with totalizing

and pre-set readout

*Require mains air

Optional Extras

Positive yarn feeding device with yarn brakes + knot catchers

Additional top or bottom fans · Plating feeders

Alternative Creel assemblies

Conversions

Cylinder for changing gauge

Interchangeable cam box cams for different fabric structures

Other Options + accessories available on request.

Specifications

Machine

Diamete

r

Gauge needles per inch

13 14 16 18 20 22 24 26 28 32 36 40

12 480 528 600 672 744 816 888 960 1032 1176 1344 1464

13 528 576 648 720 792 888 960 1032 1128 1272 1464 1584

14 576 600 696 792 864 960 1032 1200 1200 1392 1584 1704

15 600 648 744 840 936 1032 1128 1128 1296 1488 1680 1848

16 648 696 792 888 984 1104 1200 1296 1392 1584 1800 1968

17 696 744 840 960 1056 1152 1272 1368 1464 1680 1920 2088

18 744 792 888 1008 1128 1224 1344 1464 1560 1800 2016 2208

19 768 840 960 1056 1176 1296 1416 1536 1656 1896 2136 2352

20 816 864 1008 1128 1248 1368 1488 1608 1728 1992 2256 2472

21 864 912 1056 1176 1296 1440 1560 1704 1824 2088 2376 2592

22 888 960 1104 1248 1368 1512 1656 1776 1920 2184 2472 2712

23 936 1008 1152 1296 1440 1584 1728 1872 2016 2280 2592 2856

24 984 1056 1200 1368 1512 1656 1800 1968 2112 2400 2688 2976

25 1008 1080 1248 1392 1560 1704 1848 2016 2184 2472 2784 3096

26 1068 1104 1296 1488 1656 1800 1968 2112 2280 2592 2928 3216

28 1128 1224 1392 1560 1728 1920 2088 2256 2448 2784 3120 3480

30 1224 1296 1488 1728 1944 2088 2256 2448 2640 3000 3360 3744

32 1296 1392 1584 1800 1992 2184 2376 2592 2784 3192 2576 3984

34 1368 1488 1704 1896 2112 2328 2544 2760 2952 3384 3816 4224

36 1464 1560 1800 2016 2232 2472 2688 2904 3144 3576 4032 4488

Quattro III Jersey

The convertible Quattro 3 high production jersey machine is totally convertible to Plush, 3 Thread

Fleece and to Ultra High Speed plain jersey knitting.

Standard Features

Two track cylinder camming

Off line yarn feeding


Timed internal needle and sinker blowing system

Bottom blower and top fans for complete lint removal

Ultra positive feed with knot catchers

Fully tubed creels

Optional Extras

Three or four track cylinder camming

Knit, tuck and miss cams for the production of all single jersey fabrics.

Conversion kit for Ultra High Speed plain jersey production.

Conversion kits to knit plush and 3 End Fleece fabrics.

Lycra feeder attachment and positive feed equipment.

Cylinder and elements for changing gauge

40'' bale size

Alternative creel assemblies

Jersey 13 to 40 NPI

Diameter

12 13 14 15 16

1

7

1

8

1

9

2

0

2

1

2

2

2

3

2

4

2

5

2

6

2

8

3

0

3

2 34 36

Qty of feeds

36 39 42 45 48

5

1

5

4

5

7

6

0

6

3

6

6

6

9

7

2

7

5

7

8

8

4

9

0

9

6

10

2

10

8

Ma

x

rp

m

Jersey 10

0 92 85 80 75

7

0

6

6

6

3

6

0

5

7

5

4

5

2

5

0

4

8

4

6

4

3

4

0

3

7 35 33

Ultra

HS

13

7

12

6

11

6

11

0

10

3

9

6

9

0

8

6

8

2

7

8

7

4

7

1

6

8

6

6

6

3

5

9

5

5

5

1 48 45

Quattro III Plush

The convertible Quattro 3 Plush machine is totally convertible to 3 end Fleece, Jersey and to Ultra

high speed plain jersey.

Standard Features

Single Track cylinder camming for the production of quality terry and velour fabrics




Fully tubed creels

Optional Extras

4 track camming

Additional camming for reverse plated polar fleece fabrics

Conversion kits to knit 3 end Fleece Jersey and Ultra High Speed plain jersey.

Lycra feeder attachment and positive feed equipment.

Cylinder and elements for changing gauge · 40'' bale size


Plush 18 to 28 NPI

Diameter 24 26 30 32 34 36

Qty of feeds 36 39 45 48 51 54

Max rpm 28 26 24 22 21 20

Quattro III Fleece

The convertible Quattro 3 Fleece machine is totally convertible to Plush, Jersey and to Ultra High

Speed plain jersey knitting.

Standard Features

Four track cylinder camming enabling the production of 1x1, 2x1 and 3x1 inlay

Quality Plating as an alternative

Off line yarn feeding





Optional Extras

Conversion kits to knit Plush, Jersey and Ultra High Speed plain jersey.

Lycra feeder attachment and positive feed equipment

Additional cams for jacquard effect

Cylinder and elements for changing gauge

40'' bale size


Jersey 13 to 24 NPI

Diamete

r 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 28 30 32 34 36

Qty of

Fleece

feeds 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 28 30 32 34 36

Max rpm 80 74 69 64 60 56 53 51 48 46 44 42 40 38 37 35 32 30 28 26

Quattro

Dimensions

(mm)

31'' to 36'' 24'' to 30'' 19'' to 24'' 12'' to 18''

A 1955 1803 1651 1500

B 2780 2780 2780 2780

C 1840 1840 1840 1840

D 1762 1610 1457 1303

E 2438 2286 2134 1982

F 2272 2120 1968 1815

Weight Approx

Quattro III 12''-18'' 1400 kgs

Quattro 19''-24'' 1450 kgs

Quattro 25''-30'' 1500 kgs

Quattro 31''-36'' 1550 kgs

him son

Documents

twisting machines

textile winding machines

rewinding machines

silk yarn processing

draw texturing machines

air texturing machines

dty dt machines

high growth