hilti innovations winter 11 final

InnovationWinter 2011

KWIK HUS-EZ Screw Anchor

TE 6-A36-AVR Cordless Rotary

Hammer Drill

TE 7 Rotary Hammer

Drill

PS 30 / PS 35 Ferrodetectors

PMP 42 / PMP 42 / PMP 45

Plumb Levels

Hilti. Outperform. Outlast.Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000

Hilti (Canada) Corporation 1-800-363-4458 • www.hilti.ca2

Drill. Drive. Done. KWIK HUS and KWIK HUS-EZ Screw AnchorsKWIK HUS and KWIK HUS-EZ take screw anchor technology to the next level. Experience the ease and speed of setting, superior load values, and comprehensive approvals that are unique to Hilti.

The KWIK HUS anchor line is the direct result of decades of jobsite experience combined with the most sophisticated research and development in the industry.

KWIK HUS-EZ

KWIK HUS-EZ offers one solution for every zone: cracked concrete, uncracked concrete, concrete over metal deck and grout-filled CMU blocks in seismic and non-seismic zones.

KWIK HUS-EZ is a reliable, easy-to-set and fully-removable fastening solution developed to fulfill all your needs with a comprehensive cracked concrete and seismic ICC-ES approved portfolio from 1/4" to 3/4" and an ICC-ES approval pending for grout filled CMU blocks.

With the launch of the KWIK HUS-EZ, Hilti introduces the only 1/4" anchor with a ICC-ES approval in cracked concrete.

KWIK HUS

KWIK HUS offers you speed and ease of installation in a fully-removable screw anchor solution. With published technical data evaluated to AC 193 and an ICC-ES report for grout-filled CMU blocks pending, the KWIK HUS drives productivity while offering the approvals you need to get the job done.

Applications

• Glazing, windows and storefronts• Racking and shelving• Ledgers• Inside railing• Seismic braces• Formwork and tilt-up braces• Sill plates• Perimeter walls

Outperform and Outlast

• Quick and easy to install, with no torque wrench required

• Optimized thread design for best-in-class setting performance and superior load values

• For use with standard ANSI-tolerance drill bit; no matched tolerance drill bits are required

• KWIK HUS-EZ 1/4" to 3/4": ICC-ES for cracked and uncracked concrete, lightweight concrete over metal deck, and in seismic conditions

• ICC-ES for grout-filled CMU pending • Technical data for KWIK HUS in

concrete available in accordance with AC 193, appendix D

• IBC 2003, 2006 and 2009 compliant• Fully-removable anchoring solution• Suitable for reduced edge distances

and spacing• Attractive head with integrated

washer and clear indication of length and size

KWIK HUS/KWIK HUS-EZ Screw Anchors

Hilti. Outperform. Outlast.Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000Hilti (Canada) Corporation 1-800-363-4458 • www.hilti.ca 3

Order Information

KWIK HUS-EZDescription Hole

DiameterTotal Length

without Anchor Head

Minimum Embedment

Depth

Qty (pcs)Box

Item No.

KH-EZ 1/4" x 2-5/8" 1/4" 2-5/8" 2-1/2" 100 00418045

KH-EZ 1/4" x 3" 1/4" 3" 2-1/2" 100 00418046

KH-EZ 1/4" x 3-1/2" 1/4" 3-1/2" 2-1/2" 100 00418047

KH-EZ 3/8" x 3" 3/8" 3" 2-1/2" 50 00418057

KH-EZ 3/8" x 3-1/2" 3/8" 3-1/2" 2-1/2" 50 00418058

KH-EZ 3/8" x 4" 3/8" 4" 3-1/4" 50 00418059

KH-EZ 3/8" x 5" 3/8" 5" 3-1/4" 30 00418061

KH-EZ 1/2" x 2-1/2" 1/2" 2-1/2" 2-1/4" 30 00418070

KH-EZ 1/2" x 3-1/2" 1/2" 3-1/2" 3" 25 00418072

KH-EZ 1/2" x 4" 1/2" 4" 3" 25 00418073

KH-EZ 1/2" x 4-1/2" 1/2" 4-1/2" 4-1/4" 25 00418075

KH-EZ 1/2" x 6" 1/2" 6" 4-1/4" 25 00418077

KH-EZ 5/8" x 4" 5/8" 4" 3-1/4" 15 00418079

KH-EZ 5/8" x 5-1/2" 5/8" 5-1/2" 5" 15 00418080

KH-EZ 5/8" x 6-1/2" 5/8" 6-1/2" 5" 15 00418081

KH-EZ 3/4" x 4-1/2" 3/4" 4-1/2" 4" 10 00418083

KH-EZ 3/4" x 5-1/2" 3/4" 5-1/2" 4" 10 00418084

KH-EZ 3/4" x 7" 3/4" 7" 6 1/4" 10 00418085

KH-EZ 3/4" x 9" 3/4" 9" 6 1/4" 10 00418087

KWIK HUSDescription Hole

DiameterTotal Length

without Anchor Head

Minimum Embedment

Depth

Qty (pcs)Box

Item No.

KH 3/8" x 2-1/8" 3/8" 2-1/8" 1-5/8" 50 00434436

KH 3/8" x 3" 3/8" 3" 2-1/2" 50 00434437

KH 3/8" x 3-1/2" 3/8" 3-1/2" 2-1/2" 50 00434438

KH 3/8" x 4" 3/8" 4" 3-1/4" 50 00434439

KH 1/2" x 3" 1/2" 3" 2-1/4" 30 00434441

KH 1/2" x 4" 1/2" 4" 3" 25 00434443

KH 1/2" x 4-1/2" 1/2" 4-1/2" 4-1/4" 25 00434444

KH 1/2" x 5" 1/2" 5" 4-1/4" 25 00434445

KH 1/2" x 6" 1/2" 6" 4-1/4" 25 00434446

KH 5/8" x 4" 5/8" 4" 3-1/4" 15 00434447

KH 5/8" x 5-1/2" 5/8" 5-1/2" 5" 15 00434448

KH 3/4" x 4-1/2" 3/4" 4-1/2" 4" 10 00434450

KH 3/4" x 5-1/2" 3/4" 5-1/2" 4" 10 00434451

KH 3/4" x 7" 3/4" 7" 6-1/4" 10 00434452

KWIK HUS/KWIK HUS EZ Screw Anchors

Only Hilti has everything you need to get the job done — TE 4-A18 Cordless Rotary Hammer Drill, TE-CX Drill Bits,

SIW 18T-A Cordless High Torque Impact Wrench, HUS Anchors

and sockets

Note: More sizes available than shown in this publication. Please check our 2011 catalog or Hilti Online: www.us.hilti.com or www.hilti.ca



PS 30 / PS 35 Ferrodetectors

The problem detectors. PS 30 and PS 35 FerrodetectorsKeep your job running by detecting potential problems before they happen. The new easy-to-use Hilti PS 30 and PS 35 Ferrodetectors do just that by letting you take a quick look beneath the surface before coring and drilling.

The PS 30 locates rebar, copper pipes, and aluminum to help you identify where objects are before you drill so you can avoid destroying expensive bits or tools or cutting through structurally-relevant reinforcement.

The PS 35 takes it a step further by indicating depth of the detected object before expensive damage is done to concealed pipes or cables. And the PS 35’s maximum detection range can be set so that the tool only detects objects that could be in the way of setting anchors at a specific depth.

PS 30 and PS 35 Ferrodetectors – the problem detectors.

Technical Data PS 30 PS 35Accuracy 3/8 in (±10 mm) 3/8 in (±10 mm)

Max. depth (in) for rebar detection 4-3/4 in at > #3 rebar diameter (120 mm)

4-3/4 in at > #3 rebar diameter (120 mm)

Max. depth (in) for non-ferrous metal detection (e.g. copper, aluminium)

3 in (80 mm) 3 in (80 mm)

Protection class IP 54 IP 54

Battery life 8 h 8 h

Operating temperature 5°F to 122°F (-15°C to 50°C)

5°F to 122°F (-15°C to 50°C)

Dimensions (L x W x H) 9 x 4 x 1.75 in (23 cm x 10 cm x 4.5 cm)

9 x 4 x 1.75 in (23 cm x 10 cm x 4.5 cm)

Weight (incl. batteries) 15 oz (420 g) 15 oz (420 g)

*

* Some limitations apply. Contact Hilti for details.

Order Information

Description Package Contents Item No.

PS 30 Ferrodetector Includes tool, hand strap, pouch, 2 markers, (4) “AAA” batteries and operating instructions in cardboard box

00407920

PS 35 Ferrodetector Includes tool, hand strap, pouch, 2 markers, (4) “AAA” batteries and operating instructions in an impact-resistant plastic tool box

00407960

Applications

PS 30 Applications • Locate rebar, copper or EMT in

concrete• Locate copper or EMT in brick walls

PS 35 Applications • Locate rebar, copper or EMT in

concrete, CMU, or brick• Locate copper or EMT in brick walls• Determine the position and depth

of existing rebar for post-installed rebar connections

• Check concrete cover over reinforcement for trouble-free anchor setting


• Easy-to-read red and green LED indicator lights

• Single button operation• Durable rubber casing, designed to

withstand tough jobsite conditions • Unrivaled accuracy

FLEET MANAGEMENT


PMP 42 / PML 42 / PMP 45 Plumb Levels

Rugged and reliable lasers. PMP 45 Plumb and Square Laser, PML 42 Line Laser and PMP 42 Plumb LaserWith one-button tool operation and Pulse Power technology, the latest Hilti lasers drive productivity and maximize versatility. Hilti’s innovative Impact Protection System provides assurance that your PML 42, PMP 42 and PMP 45 lasers will outperform – even under the toughest jobsite conditions. And since Hilti offers the industry’s best service, including laser calibration, you can be confident that your Hilti laser is both rugged and reliable.

Technical Data PMP 45 PMP 42 PML 42Laser functions Transferring vertical and horizontal

points, plumbing, and squaringTransferring points Leveling and aligning

Self-leveling range ±5° ±5° ±5°

Dimensions (L x W x H) 4-1/5" x 2-1/2" x 3-3/4" (107mm x 65mm x 96mm)

4-1/5" x 2-1/2" x 3-3/4" (107mm x 65mm x 96mm)

4-1/5" x 2-1/2" x 3-3/4" (107mm x 65mm x 96mm)

Weight 14.56 ounces (413 grams) 15.16 ounces (430 grams) 15.16 ounces (430 grams)

Battery type Alkaline Alkaline Alkaline

Operating time with alkaline battery 30 h 50 h 30 h

IP protection class (except battery compartment)

IP 54 IP 54 IP 54

Laser class Class II Class II Class II

Measuring distance Min / max 3' (1m)/100’ (30m) Min / max 3' (1m)/100’ (30m) Min / max 3' (1m)/100’ (30m)

Accuracy at 30’ (10m) ± 1/8” (3mm) ± 1/8” (3mm) ± 1/8” (3mm)

Self-leveling time <3 sec <3 sec <3 sec

Operating temperature range 14° F to + 122° F (–10° C to + 50° C)

14° F to + 122° F (–10° C to + 50° C)

14° F to + 122° F (–10° C to + 50° C)

Order Information


PMP 45 Plumb and Square Laser

Includes: tool, removable foot, pouch, (4 ) AA batteries and operating instructions in a cardboard box

00411281

PMP 42 Plumb Laser Includes: tool, pouch, (4 ) AA batteries and operating instructions in a cardboard box

00411282

PML 42 Line Laser Includes: tool, pouch, (4 ) AA batteries and operating instructions in a cardboard box

00411283

Outperform

• PMP 42 and PMP 45: ideal shape and brightness of beam provides maximum visibility

• PMP 42 and PMP 45: fixed foot with integrated magnets attach to drywall tracks

• Hilti calibration service for highest tool accuracy

• PMP 45: five laser beams for maximum versatility

• PML 42 / PMP 42: two laser beams for ease of use

• PML 42 / PMP 42: small, pocket-sized design ideal for use in tight spots

• PML 42: brightest beam on the market for maximum visibility

Outlast

• Rugged housing for greater durability

• Impact Protection System helps protect the core of the tool and maximizes durability; laser module protected 100% of the time

• Supported by Hilti Lifetime Service which includes 2 year No Cost Coverage



Firestop Installation Tracking Software

Order Information

Description Quantity Item No.

Firestop Installation Tracking Software – initial set up 1 03470420

Take control of your barriers. Firestop Installation Tracking SoftwareThe new Firestop Installation Tracking Software (FITS) enables you to document and manage code required barrier integrity in your facilities using any web-enabled device.

Applications

• Documented barrier integrity for occupant safety


• Support compliance with code required life safety inspections

• Barrier database can be maintained and expanded throughout the life of facilities

• Integrated permitting process including photo documentation

• Accessible from any web-enabled device

• Accessible by multiple designated users


CP 653 Speed Sleeve

Safety or speed? You don't have to choose.CP 653 Speed SleeveThe CP 653 Speed Sleeve is a ready-to-use, one-step cable management device that maximizes productivity while minimizing smoke migration. Extremely low L-ratings combined with quick and easy installation make the CP 653 the best value on the market. And now the Hilti solution that you know and trust is available in a Buy American compliant version.

We know that life safety is your priority. It's our priority too.

Technical Data 2" 4"OD (device only) 2.3" 4.3"

OD (flange) 4.7" 6.7"

ID 1.7" 3.7"

Total length 12.4" 12.4"

Weight (device and flanges) 1.5 lbs 2.6 lbs

Temperature resistance 22°F to 212°F (-30°C to 100°C)

22°F to 212°F (-30°C to 100°C)

Intumescent activation Approx. 320°F (160°C) Approx. 320°F (160°C)

Expansion ratio (unrestricted) 1:40 1:40

Metal Steel with zinc coating Steel with zinc coating

Plastic ABS ABS

Fabric Glass-fiber Glass-fiber

Approvals California State Fire Marshall City of New YorkTested in accordance with:

Order Information (Buy American version)

Description Quantity Item No.

CP 653 2" Speed Sleeve B.A. 1 02008603

CP 653 4" Speed Sleeve B.A. 1 02008604

Outperform

• Round openings can be created via hole saws or core bits

• “Spin on” flanges promote fast product installation

• Cables do not need to be inserted in a uniform height to comply with the firestop detail

• Opening and closing the device is easy

• Constrictive smoke seal limits smoke migration

Outlasts

• Robust smoke seal fabric tested to 250 open-close cycles

BuyAmericancompliantNo. 4485-1200:138

MEA 413-07-MUL 1479; ASTM E 814



TE 6-A36-AVR Cordless Rotary Hammer Drill

Do more, cord less. TE 6-A36-AVR Cordless Rotary Hammer DrillExperience battery power at its best with the comfort and convenience of the new TE 6-A36-AVR Rotary Hammer Drill.

Hilti Cordless Power Care (CPC) sets the standard for impressive battery capacity with less weight. Exceptionally low vibration makes the tool less tiring to work with over long periods. Now you can do more and cord less.

Technical Data TE 6-A36-AVRRated voltage 36 V Li-Ion

Hammering speed under no load 5283 blows/min

Drilling speed 1040 rpm

Single impact energy 1.5 ft-lb

Drilling range 3/16" – 3/4"

Optimum drilling range 1/4" – 5/8"

Dimensions (L x W x H) 13.5" x 3.7" x 8.5"

Weight 8.8 lbs

Battery capacity 3.0 Ah

Order Information


TE 6-A36 AVR Performance Package

Includes tool, (2) B 36 Li-Ion 3.0-Ah batteries, C 4/36-ACS Li-Ion (TPS) charger in an impact-resistant plastic tool box, plus the following TE-C3X drill bits: (1) 3/8" x 6", (1) 5/8" x 6" and (2) 1/2" x 6"

03471835

TE 6-A36 AVR Trade Package

Includes tool, (2) B 36 Li-Ion 3.0-Ah batteries, C 4/36-ACS Li-Ion (TPS) charger in an impact-resistant plastic tool box, plus (1) TE-C3X Performance Bit Pack (3/16" x 6", 1/4" x 6", 5-16" x 6", 3/8" x 6", 1/2" x 6" and 5/8" x 8")

03471837

TE 6-A36 AVR Professional Kit

Includes tool, TE DRS-6-A dust removal system, (2) B 36 Li-Ion 3.0-Ah batteries, C 4/36-ACS Li-Ion (TPS) charger in an impact-resistant plastic tool box, plus the following TE-C3X drill bits: (1) 3/8" x 6", (1) 5/8" x 6" and (2) 1/2" x 6"

03471838

TE 6-A36-AVR and WSR 36-A 36V Combo

Includes (1) TE 6-A36-AVR Cordless Hammer Drill, (1) WSR 18-A 18 V Reciprocating Saw, (2) B 36 Li-Ion 3.0-Ah batteries, C 4/36-ACS Li-Ion (TPS) charger and (1) small Hilti tool bag, plus the following TE-C3X drill bits: (1) 3/8" x 6", (1) 5/8" x 6" and (2) 1/2" x 6"

03471839

Applications

• Repetitive anchor hole drilling in all directions in concrete and masonry. Overall drilling range 3/16" – 3/4". Optimum drilling range 1/4" – 5/8"

• Occasional drilling in wood, steel and plastics using optional chuck adapter

Outlast

• High efficiency motor for longer life • CPC battery technology helps

protect the battery, switch and motor for increased durability

• Robust battery cells for longer battery life

• Supported by Hilti Lifetime Service which includes 2-year No-Cost Coverage

Outperform

• Best-in-class performance-to-weight ratio, ideal for drilling in all directions

• Efficient hammering mechanism for superior drilling performance up to 5/8” diameter

• Corded drilling performance in cordless tool

• High battery capacity – drills more holes per battery charge than other cordless rotary hammers in the same class

• Superior working comfort due to Active Vibration Reduction (AVR)

• Virtually dustless drilling with the new TE DRS-6A dust removal accessory

• Perfectly matched with Hilti TE-C drill bits to provide accurate anchor holes

*


FLEET MANAGEMENT


TE 7 Rotary Hammer Drill

*


FLEET MANAGEMENT

Tough on concrete. Easy on you. TE 7 Rotary Hammer DrillRugged, compact and convenient, the new Hilti TE 7 is engineered with a powerful and efficient motor and an innovative hammering mechanism for superior drilling performance. Whether you are drilling 3/16" or 9/16", the new Hilti TE 7 Rotary Hammer Drill is the best tool in its class.

Weighing in at less than 7 lbs, the TE 7 keeps you drilling non-stop with minimal effort and maximum comfort. With an impressive power-to-weight ratio and the lowest vibration in its class, it’s easy to see why the TE 7 Rotary Hammer Drill is quickly becoming the professionals’ tool of choice.

Technical Data TE 7Rated input 710 W

Hammer speed under no load 4980 blows/min

Drilling speed 1050 rpm

Single impact energy 1.33 ft-lb

Drilling range 3/16" - 1"

Optimum range 1/4" -5/8"

Dimensions (L x W x H) 12.6" x 3" x 8.5"

Weight 6.4 lbs

Order Information


TE 7 Performance Package

Includes tool in an impact resistant plastic tool box plus the following TE-C3X drill bits: (1) 1/4" x 6", (1) 3/8" x 6" and (2) 1/2" x 6"

03471571

TE 7 Grounded Performance Package

Includes tool in an impact resistant plastic tool box plus the following TE-C3X drill bits: (1) 1/4" x 6", (1) 3/8" x 6" and (2) 1/2" x 6"

03471572

TE 7 + DRS Performance Package

Includes tool, dust removal system (DRS) in an impact resistant plastic tool box plus the following TE-C3X drill bits: (1) 1/4" x 6", (1) 3/8" x 6" and (2) 1/2" x 6"

03471833

TE 7 Trade Pack Includes tool in an impact resistant plastic tool box and (1) TE-C3X Performance Bit Pack (3/16" x 6", 1/4" x 6", 5-16" x 6", 3/8" x 6", 1/2" x 6" and 5/8" x 8")

03471834

Applications

• Repetitive anchor hole drilling in all directions in concrete and masonry

• Occasional drilling in wood, steel and plastics using optional chuck adapter

• Optional, self contained dust removal system (TE DRS-M) for virtually dust free drilling

Outperform

• Optimal performance-to-weight ratio, ideal for drilling in all directions

• Hammering mechanism specially designed for superior drilling performance up to 5/8”

• Perfectly matched with Hilti TE-CX drill bits to provide accurate anchor holes

Outlast

• High efficiency motor for longer life • Supported by Hilti Lifetime Service

which includes 2 year No-Cost Coverage



TE-YX and TE-Y Hammer Drill Bits

Faster drilling with more durability. TE-YX and TE-Y Hammer Drill Bits Hilti takes carbide hammer drill bits to the next level by radically improving our best-in-class TE-YX bits and introducing a completely new line of TE-Y bits.

With a symmetrical full carbide head, the new TE-YX can take the punishment of repetitive rebar hits. With a newly designed fluting system, the TE-YX also removes dust quicker than ever and reduces the weight of the bit. This means your Hilti combihammer works even more efficiently and productively.

If you don’t expect to hit rebar, our new TE-Y line offers unparalleled drilling speed. With a contoured head and carbide blade, the TE-Y drill bit is designed to slice through concrete and get dust from the hole to the surface as quickly as possible.

With these two new innovations, Hilti is putting the key to drilling productivity in your hands.

Applications

TE-YX• Optimal for drilling in reinforced

concrete• Hammer drilling in concrete,

reinforced concrete, masonry, and other natural materials

• Drilling anchor holes and doweling for structural work

• Penetrations for pipes, gas lines, conduits, and cables

TE-Y• Optimal for drilling in non-

reinforced concrete• Hammer drilling in concrete,

reinforced concrete when rebar can be avoided, masonry, and natural stone

• Drilling anchor holes and doweling for structural work

• Penetrations for pipes, gas lines, conduits, and cables

Rugged carbide blade placement allows for long bit life in materials without rebar

Contoured head and carbide blade allow immediate dust transfer from the hole to the flutes in hard and soft base materials such as concrete, CMU, limestone, and granite

Steep flutes allow for better dust transportation and faster drilling

Full symmetrical carbide head reduces jamming on rebar

Wear marks indicate anchor hole tolerance and drill bit warranty for easy replacement

Convex connection end for optimal transfer of higher impact energies of Hilti combihammers

Triple fluted helical for better dust removal and faster drilling

TE-YX Hammer Drill Bit

TE-Y Hammer Drill Bit


Positioning concrete form panels just got easier. X-FS FormstopThe new X-FS Formstop is a fast and simple form panel solution for concrete professionals, and speeds installation up to five times versus traditional drilling methods. It’s designed to aid in the precise positioning of concrete wall form panels before concrete is poured. Proper positioning of concrete wall or column forms is critical to allow proper flow of concrete in and around rebar.

Thanks to the new X-FS Formstop, your job just got easier.

Order Information

Description Qty Item No.

X-FS C 52Formstop device with pre-mounted X-C 52 (2" fastener).

100 00407346

X-FS MX Formstop device without pre-mounted nail. For use with DX 460-MX 72 magazine tool for maximized productivity.

100 00408022

X-FS C 52 Formstop Combo 1000 fasteners and cartridges

1000 03467220

DX 460-F8 Formstop (1K) Package Includes DX 460 tool and 1000 fasteners and cartridges

1000 03467221

DX 460-F8 Formstop (5K) Package Includes DX 460 tool and 5000 fasteners and cartridges

5000 03467222

DX 460-MX Formstop and X-CT Package* Includes DX 460-MX tool, 1000 X-FS MX Formstop, 1000 X-C 52 MX and 1000 X-CT 62 MX fasteners and cartridges

See pkg details

03467303

X-FS MX Includes 1000 X-FS MX Formstop and 1000 X-C 52 MX fasteners and cartridges

1000 03467566

Outlast

• Polyethylene plastic will not corrode after concrete is poured

• Ribbed surface bonds well with concrete

• Top portion tapers inward to reduce overall stress on the X-FS body from panel impact and when concrete is poured

• High impact plastic withstands low temperatures

Applications

• Position and alignment of concrete wall form panels

• Column positioning

Outperform

• Four to five times faster installation than traditional drilling methods

• Easy installation using the DX 460 or DX 36 Powder-Actuated Tools

• Suitable for dynamic and static loads

• X-FS “tophat” design compensates for overdrive due to various base material hardness

Technical Data X-FSFastener length 2" (X-C 52)

Formstop material Polyethylene

X-FS Formstop

* X-CT fastener is a unique, break away nail designed for formwork applications facilitating the simple installation and removal of 2x4 kicker plates.



Abrasives

Order Information

Cutting Abrasives Diameter Thickness Arbor Type Pack qty

Item No.

Cut-off wheel 4-1/2" 4.5" 0.045" 7/8" 1 25 SP: 00436655 UP: 00436656

Cut-off wheel 6" 6" 0.045" 7/8" 1 25 SP: 00436659 UP: 00436660

Chop saw blade 12" 12" 3/32" 1" 1 10 SP: 00436730 UP: 00436731

Chop saw blade 14" 14" 3/32" 1" 1 10 SP: 00436732 UP: 00436733

Grinding Abrasives Diameter Thickness Arbor Type Pack qty

Item No.

Grinding wheel 4-1/2" 4.5" 1/4" 7/8" 27 10 SP: 00436691 UP: 00436692

Grinding wheel 7" 7" 1/4" 7/8" 27 10 SP: 00436697 UP: 00436698

Grinding Abrasives with hub

Diameter Thickness Arbor Type Pack qty

Item No.

Grinding wheel 4-1/2" with hub

4.5" 1/4" 7/8" 27 (hub)

10 SP: 00436701 UP: 00436702

Grinding wheel 7" with hub

7" 1/4" 7/8" 27 (hub)

10 SP: 00436707 UP: 00436708

Finishing Abrasives Diameter Thickness Arbor Type Pack qty

Item No.

Flap disc 4-1/2" with hub

4.5" G60 5/8"-11

27 (hub)

10 SP: 00438396 UP: 00438397

Flap disc 5" with hub

5" G60 5/8"-11

27 (hub)

10 SP: 00438403 UP: 00438404

The metalworker’s choice. Abrasives Hilti introduces a complete selection of high quality abrasives. The new and improved line up was developed to deliver the most value per cut while driving maximum performance.

Made with high quality abrasives which do not contain iron, sulfur or chlorine Hilti wheels will not contaminate stainless steel. Whether you are cutting, grinding, blending or finishing metal, Hilti has the product you need.

Choosing between Superior Performance and Universal Performance

The Superior Performance (SP) line will deliver the fastest cut and material removal rate.

The Universal Performance (UP) line offers the best value for money, without jeopardizing the high performance you expect.

Applications

• Cutting angle irons, pipes, rebar, metal stud, stock

• Grinding welds, beveling, deburing• Cutting and notching: cleaning root

pass, pipeline welds, light grinding• Surface finishing, blending,

grinding irregular shapes• Serial cutting of rebar, studs,

steel beams and rails

Outperform

• Contaminant-free abrasives allow cutting in metal and stainless steel

• Consistent performance due to computer controlled abrasive grit size distribution

• Fast and precise start up thanks to multi-layers of fiber glass mesh

Outlast

• Dense bond structure provides higher resistance against breakage

• Self-sharpening effect provides longer wheel life

• Rigorous quality control

DS-BB Masonry Diamond BladesHilti Online

Hilti, Inc. (U.S.) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000 Hilti (Canada) Corporation 1-800-363-4458 www.hilti.ca

Hilti. Outperform. Outlast.

The latest Hilti has to offer, right at your fingertips.Order, manage your account, access the latest product information and more.

Visit the new Hilti Online

We took a good thing and made it even better. A fresh look and new navigation features make finding what you are looking for quick and easy.

www.us.hilti.comwww.hilti.ca

Become a fan.From product updates and industry news to cool videos and interactive polls, our new Facebook page is the place to be to chat with other industry professionals and catch the latest breaking news from Hilti.

www.facebook.com/HiltiNorthAmerica

Watch and share.Our new YouTube channel features videos of our most innovative new products and how-to demonstrations from the experts. Check it out to see the latest from Hilti.

www.youtube.com/HiltiNorthAmerica

Lifetime Service



NO COSTS

MANUFACTURER’SWARRANTY

REPAIR COST LIMIT

LIFETIME SERVICE

2 Years up to

Lifetime Lifetime

Tool Coverage Summary

Hilti tool repairWhen a tool goes down, Hilti understands your need to get it back on the job quickly. That is why we strive to repair and return your tool in 5 working days or less.

The process is simple:1. Call Hilti Customer Service (U.S. 1-800-879-8000, Canada 1-800-363-4458, Guam 1-671-646-0930, Puerto Rico 1-787-936-7060).2. Answer a few simple questions and your shipping documents/label will be faxed

or emailed to you within minutes.3. Package your tool for shipping, your shipping documents/label, the box and

give the packaged tool to your delivery person or drop it off at the nearest shipping location. Shipping methods vary depending upon region.

• 2 year No-Cost Coverage • Lifetime Repair Cost Limit • Lifetime Manufacturers

Warranty

Laser Measuring and Positioning Systems; CPC Lithium-Ion Systems; Rotary Hammer Drills; Combihammers; Demolition Hammers; Diamond Coring Systems; DG 150 Diamond Grinding System; GX 120, DX 600N, DX 462, DX 460, DX 351, DX 76, DX 36, DX 35, DX E72

• 1 year No-Cost Coverage • Lifetime Repair Cost Limit • Lifetime Manufacturers

Warranty

NiMH and NiCd Cordless Systems; Reciprocating Saws; Jig Saws; Circular Saws; 5" to 7" Angle Grinders; Screwdrivers; Impact tools; GX 100-E, DX 860, R4DWX-S; P 3500, and P 8000 Dispensers

• Lifetime Repair Cost Limit • Lifetime Manufacturers

Warranty

4-1/2" Angle Grinders; Gas Saws

No-Cost Coverage for up to 2 years

With Hilti tools you incur absolutely no repair costs for up to 2 years from the date of purchase. This includes:

• Inbound and return shipping

• Labor costs

• Repair or replacement of any defective parts as well as parts subject to wear and tear*

• Servicing when indicated by the service indicator light on the tool

• Functional check, adjustments and safety check after every repair

• One calibration per year of Hilti laser tools during the 2 year no-cost period

Lifetime Repair Cost Limit

After reaching the end of the 1 or 2 year No-Cost period, you pay a maximum of 30% of the corresponding new tool’s list price per repair. If the cost of the repair is below this limit, you only pay the actual cost of the repair.

Plus• An extended 6 month no

cost period for tools with an initial 2 year No-Cost Coverage period, and 3 months for tools with an initial 1 year No-Cost cCoverage period

• No cost inbound shipping

• No cost calibration with laser tool repairs

Lifetime Manufacturers Warranty

Hilti repairs or replaces the Hilti tool, at no cost, if there is damage to the tool due to defects in materials or workmanship.

Limitations

• No-Cost Coverage excludes damage due to abuse, or use not in accordance with the tool operator’s manual.

• Lifetime Manufacturer’s Warranty and Lifetime Repair Cost Limit offered as long as replacement parts remain available.

• Refurbished batteries may be used as a no cost replacement part.

* Pistons, spring clips and buffers for powder-actuated fastening tools are excluded from the no-cost wear and tear coverage.

Hilti Tool Fleet Management

Tool Fleet ManagementMaximum Productivity. Everyday.

Tool Fleet Management offers our customers the opportunity to drive up to 50% more profit from their tool management processes by improving jobsite productivity and removing administrative costs.

Features and Benefits

Another innovation from Hilti that delivers value and performanceContact your Hilti Account Manager today for a personalized Tool Fleet Management presentation or call toll free to schedule an appointment.*Available for select tool models. Coming soon in Canada

$Fixed Monthly CostsNo money upfront, while avoiding unexpected repair and replacement costs

No-Cost RepairsFast, quality repairs, free of charge for the entire period of use

Labeling and TrackingPersonalized tools with total online transparency

Timely ExchangeKeeps you equipped with up-to-date tools for top productivity and safety

Theft CoverageReduces financial risk and makes replacement of tools easy in case of theft

Loan Service*Loaner tools minimize downtime in the event of repairs




*ISO 14001 US Only

P.O. Box 21148, Tulsa, OK 74121 • Hilti, Inc. (US) 1-800-879-8000 www.us.hilti.com • en español 1-800-879-5000Hilti (Canada) Corporation 1-800-363-4458 www.hilti.ca • Hilti is an equal opportunity employer • Hilti is a registered trademark of Hilti, Corp.©Copyright 2010 by Hilti, Inc. • PS27 3471665 • 11/10 • SM

The data contained in this literature was current as of the date of publication. Updates and changes may be made based on later testing. If verification is needed that the data is still current, please contact the Hilti Technical Support Specialists at 1-800-879-8000. All published load values contained in this literature represent the results of testing by Hilti or test organizations. Local base materials were used. Because of variations in materials, on-site testing is necessary to determine performance at any specific site. Printed in the United States

hilti innovations winter 11 final

Documents