A Hilco Global CompanyVested in Your Success

www.hilcoind.com

Tuesday, January 19th • 11:00 am Local TimeBelton, South Carolina

WEBCAST/ONSITE AUCTIONHilco® Industrial

Complete Precision MetalStamping Facility

with Servo Feed Lines

Hilco® Industrial

Powered by

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)2

HilcoTM Industrial

2008

STRAIGHT SIDE 2-POINT PRESS1 – KOMATSU MODEL E2G400 400 TON STRAIGHT SIDE TWO-POINT

PRESS, S/N 10166 (2008), Stroke 16”, Strokes per Minute 20 to 40Variable, T-slotted Bolster Plate 61” x 122” x 7.5” Thick, Die Height toBolster 36.22”, Motorized Slide Adjustment 12.2”, Window in Uprights 63”Wide, Floor Standing, Touch Screen Controls, Shadow 8 Wintriss LightCurtains, Tie Rod Frame, New London Motorized Conveyor

AUCTION DATE

TUESDAY, JANUARY 19TH

BEGINNING AT 11AM LOCAL TIMEVERY SHORT AUCTION SALE –PLEASE BE PROMPT

PREVIEw DATE

MONDAY, JANUARY 18TH

8AM TO 4PM LOCAL TIMEFor eArlIer InspeCtIon, pleAse ContACt ken plAnet At +1 248-238-7988 or emAIl kplAnet@HIlCoGloBAl.Com

AUCTION &  PREVIEw LOCATION399 BROYLES AVE. BELTON, SC 29627

See Videos of Presses and Coil Feed LinesUnder Power on our Website

www.hilcoind.com/SuDanSC

FURTHER INFORMATION• A 16% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENT

IS MADE BY MEANS OF CASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANKLETTER OF GUARANTEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE.AN 18% BUYER'S PREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENTIS MADE BY CREDIT CARD (ACCEPTED FOR INVOICES OF $2000 OR LESS), ORWHEN PAYMENT IS RECEIVED AFTER 48 HOURS OF SALE CLOSE. AN 18%BUYER'S PREMIUM WILL BE CHARGED FOR ALL BIDSPOTTER PURCHASES WITHNO DISCOUNT FOR PROMPT PAYMENT. ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINE IS FRIDAY, FEBRUARY 12TH WITH HOURS OF REMOVAL BETWEEN8AM TO 4PM MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEAD-LINE ARE SUBJECT TO FINES OF $500 PER DAY.

MACHINERY &  EQUIPMENT

KEN PLANET +1 248-238-7988 • KPLANET@HILCOGLOBAL.COMPAYMENT INFORMATION

LESIA JOSEPH 616-328-6892 • LJOSEPH@HILCOGLOBAL.COMHILCO ACCOUNTS RECEIVABLE AT AR-GR@HILCOGLOBAL.COMCUSTOMER SERVICE

+1 877-37-HILCO • +1 616-732-1800 • INFO@HILCOIND.COM

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our website at www.hilcoind.com for any changes to

date, sale process, terms and conditions and list of available assets.

WEBCAST/ONSITE AUCTION

STRAIGHT SIDE 2-POINT PRESS

Complete Facility Availablewith Real Estate & Equipment

See Page 6 for Details.

Powered by

For more information, please visit us on the web at www.hilcoind.com/SuDanSC 3

STRAIGHT SIDE DOUBLE CRANK PRESSES • GAP FRAME PRESSES

STRAIGHT SIDE DOUBLE CRANK PRESSES1 – BLOW PRESS MODEL SC2-300-96-48 300 TON STRAIGHT

SIDE DOUBLE CRANK PRESS, S/N SDG-300-304-92 (1992),Stroke 8", Strokes per Minute 0-80 Variable, Bed 48" x 96", T-slotted Slide 48" x 96", Shut Height 24" to T-Slotted Bolster,Motorized Slide Adjustment 10", Window in Uprights 32" W x 20"H, Floor Standing, Tie Rod Frame, Twin End Drive, Single BackGeared, Air Clutch and Brake, Console Control with GemcoSeries 1992 Press Set Controller, Triad Light Curtains

1 – NIAGARA MODEL SC2-200-72-36 200 TON STRAIGHT SIDEDOUBLE CRANK PRESS, S/N 38087, Stroke 10", Strokes perMInute 25-50 Variable, Bed 36" x 72", T-slotted Slide, Shut HeightApprox. 24", Motorized Adjustment 10", T-slotted Bolster Plate 5"Thick, Window in Uprights 24" W x 20" H, Air Clutch and Brake,Jobber Plus Control, Contrinex Light Curtains

GAP FRAME PRESSES2 – KOMATSU MODEL OBW250 250 TON TWO-POINT GAP FRAME PRESSES,

S/Ns 10116 & 10113 (Both 1988), Stroke 11.81", Strokes per Minute 20-40 Variable,Bolster 106.20" x 37.40" x 7.09", Slide 82.68" x 27.56", Die Height 21.65" to Bolster,Motorized Slide Adjustment 4.72", Triad Light Curtains

1 – STAMTEC MODEL G2-200 200 TON TWO-POINT GAP FRAME PRESS, S/N S70569 (1997), Stroke 9.85”, Strokes per Minute 25-45 Variable, Bolster 94.56”x 33.1”, Slide 72.89” x 25.61”, Die Height 19.7”, Motorized Slide Adjustment 4.7",Air Clutch & Brake, Gemco Press Monitor, Relay Controls, Triad Light Curtains

2 – STAMTEC MODEL G2-110 110 TON TWO-POINT GAP FRAME PRESSES, S/Ns 0162 & 0156, Stroke 7.09", Strokes per Minute 35-65 Variable, Bolster 70.8"x 25.6", Slide 55.11" x 19.68", Die Height 17.75", Motorized Slide Adjustment3.94", Press Monitor, Omni Link #805 Touch Screen Control, Wintriss HoneywellShadow VII Light Curtains

1 – STAMTEC MODEL G1-60-S 60 TON SINGLE-POINT GAP FRAME PRESS, S/N 0357 (1995), Stroke 4.73", Strokes per Minute 35-90 Variable, Bolster PlateApprox. 19.7" x 35.46" x 3.5" Thick, Slide Approx. 14" x 19.7", Die Height 11.82”,Slide Adjustment 2.96", 7.5 HP Motor, Triad Light Curtains, Rapid Air PressMounted #104-CJ Servo Feed, S/N 116780, Width 4"

SERVO COIL FEED LINES • COIL CRADLES • AIR FEED–STRAIGHTENERS

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)4

2012 2012

2012

SERVO COIL FEED LINES1 – DALLAS 20,000-LB. X 48" X .075" CAPACITY SERVO COIL FEED

LINE (2012), Reel Model DJR-20,000 x 48, S/N 22934 (2012),Powered Hold Down Arm, 60" Max. Coil OD, 20" to 24" ID, HydraulicExpansion, Six Coil Keepers, Travelling Coil Car, #LC-20,000 x 48",S/N 22935, 32" – 60" OD, 5 HP Motor & Hydraulic Power Unit,Straightener Model DPS-3 1/2-7-48 Power Straightener, S/N 22932,Threader & Peeler, 10’ x 40” Threading Table, Dallas DRFM-448 ServoFeed, S/N 22933, Dallas Industries Touch Screen Smart Controls

1 – DALLAS MODEL DRFPS-324-RH .080" X 24" / .104” X 12” CAPAC-ITY SERVO FEEDER/ STRAIGHTENER, S/N 22816 (2010), Model #PTS-282-RH 7-Roll Straightener, S/N 22817, Dallas Tuff Servo TouchScreen Control, Emerson/Control Techniques Unidrive, Cabinet Base

1 – DALLAS MODEL DRFPS-418-RH 18" X .125" CAPACITY SERVOFEED/STRAIGHTENER, S/N 21796 (2002), Feed Rolls 4" Diameter,Dallas Tuffserv Programmable Controller, Dallas #PTS-2 1/4-7-18Pull-Through Straightener, S/N 21797, Cascade Rolls, Cabinet Base,Passline Height 44" +/- 5"

1 – DALLAS MODEL DPR-10000X36 10,000-LB. X 36"W CAPACITYCOIL REEL, S/N 18708 (1995), Hold Down Arm, 60" Max. Coil OD,20" to 24" ID, Hydraulic Expansion, Six Keepers, Loop Control Arm

1 – DALLAS DPR-12000-48 12,000-LB. X 48" CAPACITY COIL REEL,S/N 18417 (1993), 60" Max. Coil OD, 20" to 24" ID Hydraulic Mandrel

COIL CRADLES1 – ROWE MODEL 8030J 8,000 LB CAPACITY COIL CRADLE, S/N 28091

(1988), Coil Width 30" Max, Coil OD 50" Max2 – ROWE MODEL 4030J 4,000 LB CAPACITY COIL CRADLES, S/Ns 29104

& 27633 (Both 1987), Coil Width 30" Max, Coil OD 50" Max1 – ROWE MODEL A-10-2-J 2,000 LB CAPACITY COIL CRADLE &

STRAIGHTENER, S/N 21215, Coil Width 10" Max, Coil Thickness .020" –.105", OD 40" Max, 7-Roll Straightener, Entry & Exit Pinch Rolls

AIR FEED-STRAIGHTENERS2 – AIR FEEDS INC. MODEL AF-5 30" WIDE X 18" STROKE PNEUMATIC

COIL FEEDER/ STRAIGHTENERS, S/Ns 921210 & 921216 (Both 1992),Capacity .280", Cylinder Bore 5" Diameter, 5-Roll Pull-Through Straightener,Pneumatic Pinch Feed Rolls, Cabinet Base

1 – AIR FEEDS INC. MODEL AF-4 24" WIDTH X 18" STROKE PNEUMATICCOIL FEEDER/ STRAIGHTENER, S/N 90422 (1990), Thickness Capacity.140", 18" Stroke, Cylinder Bore 4" Diameter, 5-Roll Pull-ThroughStraightener, Cabinet Base

Partial Listing Only, Please Visit Our Websitewww.hilcoind.com/SuDanSC

For Complete Lot Catalog

INSPECTION • CNC TUBE BENDER • ROLLING STOCK • TOOL ROOM

For more information, please visit us on the web at www.hilcoind.com/SuDanSC 5

INSPECTION1 – MITUTOYO MODEL BRIGHT BRT-916 COORDINATE MEASURING

MACHINE, S/N 0071711 (1998), Travels: X=35.63", Y=63.19",Z=23.82", Renishaw #PH9 Probe, Probe S/N M98819, JoystickControl, Renishaw #PHC9 Probe Head Control, Renishaw #PH10DProbe Head Drive, Mitutoyo Corp #UC220 Controller, S/N 700111, DellComputer, Printer, Integrated Quality Serial Key, S/N 80934, CMMManager Version 2.3.0.0

1 – RENISHAW MODEL PH9 CMM PROBE, S/N 0G01931 – RAYCO LAYOUT FIXTURE1 – 36" X 36" X 6 1/2" GRANITE SURFACE PLATEQUANTITY OF INSPECTION EQUIPMENT, Including: Meyer Pin GaugeSets, Block Gauge Set, Mitutoyo Digital Height Gauges, Mitutoyo Digimatic& Fowler Calipers, Mitutoyo Digital Micrometers, Mitutoyo & StarrettProtractors, Mitutoyo Depth Gauge, Extech Non-Contact Thermometer,Comm 2000 Sharp Edge Tester, Torque Wrenches, Extech Sound LevelMeter

CNC TUBE BENDER1 – COMCO MODEL KB-50ND CNC TUBE BENDER, S/N K-05x06

(2006), Diameter Capacity 50.8 mm (2”), Pro Face PLC Control,2500mm (98.43") Tube Max. Length, 200mm (7.87") Bending Radius,Yaskawa AC Servo Motor, 2-Hi Bending Capability

ROLLING STOCK1 – HOIST MODEL E200 15,000-LB. ELECTRIC FORKLIFT TRUCK (2001), Max Lift 118”, 3-Stage Mast, Back Tilt 7°, Forks 60”,

Front Tires 28 x 14 x 22, Rear Tires 22 x 8 x 161 – CATERPILLAR MODEL M100A 10,000-LB. ELECTRIC FORKLIFT TRUCK, S/N 07FG00061 (1991), 3-Stage Mast, Forks 48”,

Front Tires 22 x 12 x 16, Rear Tires 18 x 8 x 12 1/21 – CATERPILLAR 3,500 LB CAPACITY FORKLIFT TRUCK1 – CATERPILLAR MODEL F30 3,000 LB. ELECTRIC FORKLIFT TRUCK, S/N 05DB03871 (1991), Max Lift 154", 3-Stage Mast,

Forks 42", Meter Indicates 4,521 Hours5 – HOBART/C&D/POWER BOSS BATTERY CHARGERS, 18 Cell, 36 Volt1 – KENT MODEL KA 33 SS ELECTRIC WALK BEHIND FLOOR SCRUBBER, S/N 963669254, Width 33", Battery Charger1 – 36" X 48" PLATFORM FORKLIFT CAGE1 – FORD MODEL F-150 TRITON STX 4X4 PICKUP TRUCK, S/N 1FTRX14W27FA44662 (2007), Odometer Reads 70,650 Miles,

Supercab, Four Wheel Drive, Manual Doors & Windows, Bed Length 6' 6", 8-Cylinder Gasoline Engine

TOOL ROOM EQUIPMENT1 – VICTOR MODEL 1020AH 10" X 20" HYDRAULIC SURFACE GRINDER, S/N 9923033, 10" x 20" Electro Magnetic Chuck,

Programmable Controller, Coolant System, Spindle 3 HP, Hydraulic Unit 1 HP, Cross Feed 1/5 HP, Coolant Pump 1/8 HP 1 – REID MODEL 1426 6" X 12" SURFACE GRINDER, S/N 20783, Hitachi Electromagnetic Chuck1 – MIGHTY TURN MODEL MSH-1430G ENGINE LATHE, S/N 321962 (2002), Swing 14” Centers 30”, 1.5" Spindle Bore, 3 HP,

60-2,000 RPM, Tail Stock, Cross Slide, Steady Rest, 6 1/4" 3-Jaw Chuck, Hole Through Spindle 1.75" 1 – BRIDGEPORT 1-1/2 HP VARIABLE SPEED VERTICAL MILLING MACHINE, S/N 136857 (1970), Table 9" x 48", Anilam 2-Axis DRO 1 – POWERMATIC MODEL 140 VERTICAL BAND SAW, S/N 7-1197, Table 16" x 16"

2006

WELDERS • PLANT FACILITIES & SUPPORT • REAL ESTATE

To schedule an auction, please call Hilco Industrial  at 1-877-37-HILCO (44526)6

WELDERS1 – CUSTOM DESIGNED & FABRICATED 125 KVA PNEUMATIC PRESS TYPE

RESISTANCE WELDER, Technitron Series T2050 Weld Controller, Palm ButtonControls, Roman #SM125 Weld Power Source, Bed & Upper Platen 12" x 30"

1 – NORTRONIC 120 KVA CUSTOM PNEUMATIC PRESS TYPE RESISTANCEWELDER, Interlock Industries Model 108 Weld Controller, Throat 14"

1 – 125 KVA CUSTOM PNEUMATIC TYPE RESISTANCE WELDER, WTC Series 400Controller, S/N 211014-1, Roman 125 KVA Weld Transformer

QUANTITY OF: Assorted Welding Accessories

PLANT FACILITIES1 – COMPAIR MODEL 6075 75-HP ROTARY SCREW AIR COMPRESSOR,

S/N V9H43060, with Dri-Aire Air Dryer 1 – MGM TYPE HT 30 KVA DRY TYPE TRANSFORMER, S/N 9804-30D-163-5,

Voltage 480 – 240 / 120 CT, 3 Ph, 60 Hz, Catalog HT30A3K2SH2 – TJ SNOW MODEL 150AC 1.5 TON CHILLERS, S/Ns 3779 & 3649

PLANT SUPPORT1 – WEIGH TRONIX MODEL DS6060-10 10,000 LB CAPACITY PLATFORM SCALE,

S/N 6196A, Platform Size 60" x 60", National Controls Inc Scale Read Out, #A250,S/N SR91881101, Parts Platform 14" x 12" & Read Out

1 – ATI MODEL LPEC6872M PALLET STRETCH WRAPPER, S/N 611181 – MILLER MODEL SYNCROWAVE 250 CC/AC-DC WELDING POWER SOURCE,

S/N KK072831, KW 11.4, Ph 1, Volts 200/230/460, Mask, Foot Pedal, Two (2)WeldTek Guns, Miller Gas Powered Water Cooler, #KK073190, Stock #043094

1 – 24" X 72" X 5" THICK T-SLOTTED BOLSTER PLATE1 – QTY 18 – RISERS, Includes: (8) 7" x 3" x 48", (10) 1 1/4" x 7" x 48"QUANTITY OF Die Parallels, Isolation Pads, Die Clamps & Hold Down ToolingPLANT SUPPORT EQUIPMENT, Including: Pallet & Die Storage Racking, Zebra#ZM400 & Z4MPlus Label Printers, 1.5 HP Chillers, Belt/Disc Sander, Powermatic DrillPress, Demagnetizer, Steel Layout & Welding Tables, Shim Stock, Eye Bolts, RiggingChain, Chicago Riveters, Dengensha #VNW-S8-DRLH Parts Feeders, Letter/NumberPunch Set, Banding Cart, Clinching Tools, Pallet Jacks, Maillis Model MT 450 PoweredStrapping Machine, S/N 145150042 (2015), Hand Tools, Metal Shears, PneumaticGrinders, Grease Guns, 2-Ton Bottle Jacks, Reamers & Taps, Tool Boxes, Kurt AnglockVise, Plastic Collapsible Containers, Office Furniture

REAL ESTATE

399 Broyles Ave. • Belton, SC 29627

Contact Ken Planet for additional information

+1 248-238-7988 or email kplanet@hilcoglobal.com

LAND & BUILDINGZoned IndustrialLand Area 4.32 AcresBuilding 23,000 SF Office 2,000 SF Production 10,000 SF Warehouse 11,000 SF

BUILDING SPECIFICATIONS• Built 1988 • Additions: 1993 & 2012• Steel & Masonry Construction• Reinforced Concrete Foundation

• Gabled Metal Roof• (2) Dock High Doors• (2) Drive In Doors

For more information, please visit us on the web at hilcoind.com/SuDanIndustrial 7

2004

CompletePrecisionStampingFacility

including Presses up to1,000 Ton Capacity with

Servo Feed Lines, Welding Cells, Assembly & Inspection Equipment

• Presses up to 1000 Ton x 144” Bed /

Floor Standing – Blow / Komatsu /

Minster / Brown & Boggs

• Servo Feed Lines up to 30,000 Lb x

48” x .135” by Dallas

• CMM & Tensile Tester, Tool Room, welding,

Rolling Stock, Inspection & Quality

Complete Facility with Cranes, Scrap Conveyor Line,

Real Estate & Equipment isAvailable Immediately

UPCOMING FEBRUARY SALE

269 Kay Industrial Dr., Orion, MI

February 4TH • 10AM LOCAL TIMEPREVIEW: February 3rd 8AM-4PM

2003

Forwarding Service Requested

PresortedFirst Class MailU.S. PostagePAID

Detroit, Mich.Permit No. 2655

HILCO Industrial is a division of Hilco Global • Headquarters 5 Revere Drive, Ste. 206 • Northbrook, IL 60062 • All rights reserved

Hilco Industrial, LLC South Carolina Auctioneer & License: Tim Pfister License #AUC.4364 • SC License #AF.4008 • IL  License #444.000215

Printed in USA • SUD5033 • Please visit our website at www.hilcoind.com to review our complete terms and conditions.

Terms of SaleA 16% buyer's premium will be charged on all assets when pay-ment is made by means of cash, cashier’s check, company check(with bank letter of guarantee) or wire transfer within 48 hours ofsale close. An 18% buyer's premium will be charged on all assetswhen payment is made by credit card (accepted for invoices of$2000 or less), or when payment is received after 48 hours of saleclose. An 18% buyer's premium will be charged for all BidSpotterpurchases with no discount for prompt payment. Everything willbe sold to the highest bidder for cash, in accordance with theAuctioneer’s customary “Terms of Sale”, copies of which will beposted on the premises of the sale and subject to additional termsannounced the day of sale. All items will be sold “as is, where-is”without any warranties, expressed or implied. Although obtainedfrom sources deemed reliable, the Auctioneer makes no warrantyor guarantee to the accuracy of the information herein contained.Bidders are encouraged to thoroughly inspect the items on whichthey intend to bid prior to sale. Absolutely no items will beremoved until the day after the conclusion of the sale and paymentis made in full. Subject to additions, deletions and prior sale. Forupdated information, please visit our website at www.hilcoind.comfor any changes to date, sale process, terms and conditions andlist of available assets.

Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURSAFTER THE AUCTION CLOSES. Payment is to be made to HilcoIndustrial, LLC. Payment Options: VISA, Mastercard Discoveraccepted – if invoice total is $2,000 or less; Wire Transfer;Certified Check; or Company Check (with Bank letter of guaran-tee – see sample letter below). All sales are subject to sales tax.Purchasers claiming exemptions from taxes must provide proofsatisfactory to the Auctioneer of their entitlement to claim suchexemptions. Please see complete terms and conditions on ourwebsite, www.hilcoind.com.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee willbe valid for purchases made at the Auction of Su-Dan- SC onJanuary 19, 2016.

FollowUs on:

A Hilco Global Company

Vested in Your Success

31555 W. Fourteen Mile Road, Suite 301Farmington Hills, MI 48334Ph: 248-254-9999Fx: 248-254-9995www.hilcoind.com

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

WEBCAST/ONSITE AUCTIONHilcoTM Industrial

Tuesday, January 19th • 11:00 am Local TimeBelton, South Carolina

Complete Precision MetalStamping Facility

with Servo Feed Lines