highly flexible „all-in-one“ smt production systems › waupload › ... · production stop and...

24
HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS

Upload: others

Post on 24-Jun-2020

5 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

HIGHLY FLEXIBLE „ ALL- IN-ONE“ SMT PRODUC TION SYSTEMS

Page 2: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

S W I S S M A D E

SMART solutions for tomorrow’s electronic production

2

Universal equipment for all placement needs

Comprehensive component range from 01005 to 80x70 mm

Jet dispensing of surface mount adhesives and dispensing of solder paste

Up to 240 feeder lanes

Intelligent hot swap feeders with no production interruptions

Work area of up to 600x430 / 600x400 mm (23.6” x 16.9”/15.7”)

Intuitive software interface

Full traceability to component and board level

Integrated QA functions

Modular, expandable production capacity

SMART solution software and hardware

SMART solutions for tomorrow’s electronic production

Universal equipment for all placement needs Comprehensive component range from

Jet dispensing of surface mount adhesives and dispensing of solder paste

Intelligent hot swap feeders with no

Work area of up to 600x430 / 600x400 mm

Intuitive software interface Full traceability to component and board level

Modular, expandable production capacity SMART solution software and hardware

Page 3: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

S W I S S M A D E

Highly flexible SMT production

Small volumes and fast product changeovers are characteristic for today’s SMT production. Pure placement speed does not determine throughput anymore, but a vast range of features improve overall equipment e� ciency. The Paraquda o� ers

unmatched changeover times, the highest number of feeder slots per square meter in the market, intelligent kitting without production stop and the ability to combine placement, dispensing and component verifi cation all in one. Thanks to the easy

Best in class SMT production is guaranteed with high feeder capacity, intelligent kitting, combination of pick-and-place and dispensing processes, simplifi ed graphical user interface and a wide range of components handling.

integration with modern ERP and production planning systems the Paraquda is the ideal equipment for high mix production with permanent changing production schedules.

3

Page 4: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

Sophisticated graphical user interface enables intuitive programming

Touch screenAll Paraquda systems are based on Essemtec’s modern eez-Technology. The touch screen based operation enables access to all functions with your fi ngertip as well as drag and zoom.

» The easy to use software guides operators, eliminates programming errors and optimizes production planning.

S W I S S M A D E

4

Operation and programming The Paraquda ePlace software has an excellent menu structure and is very easy and intuitive to learn. All relevant information is displayed graphically. Complex CAD data is displayed as a virtual circuit board with realistic images of components and therefore comprehensible for anybody. Operators can pre-check the programs visually and get live monitoring during process.

Component library Over 200 component shapes are stored in the shape library with all relevant parameters. New shapes are easily constructed using either the fully automatic camera capture software or are easily programmed with the built-in shape generator. Data on solder paste or surface mount adhesives are directly integrated as well. Data sheets and jetting/dispensing parameters of the most commonly used fl uids are equally stored in the data base and allow a quick and reliable process setup.

Page 5: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

I N T U I T I V E S O F T WA R E

5

Universal CAD converterConverting CAD data into placing programs within seconds. Changes such as rotation, mirroring, moving or deletion of components are achieved with a few fi nger taps. Stepping up of PCBs into multi panels is equally supported. O� ine visualization of PCBs and all its components guarantees error free placement starting from the fi rst board.

Process controlAll process steps are recorded and stored in the database. The analysis of such results is a great tool to introduce process optimization for throughput and reliability.

Real time process monitorDuring production, all operations and their progress are displayed graphically and in real time on the screen giving the operator full visibility of all functions. The software is capable of multitasking, following jobs can be programmed simultaneously without process interruption.

Access control and multilingual interfaceThe integrated access control enables restrictions to certain menu items for various user groups or individuals. It is even possible to assign di� erent interface languages to di� erent users and thus reducing operator errors.

Context sensitive helpAnother great feature of the operating system is its context sensitive help. A touch of the help button from any menu opens the relevant help page describing the various menu items of that screen. Training time and user errors are equally reduced.

Page 6: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

S E T U P

6

S E T U PS E T U P

Small foot print, universal use – Swiss Made!

Much attention was given in the mechanical design to achieve high motion accuracy and high damping of the gantry. The cross bar is driven on both sides and equipped with high accuracy linear measurement systems.

The motion system rests on a mineral cast base designed for superior thermal stability and damping. The Paraquda systems are entirely designed and assembled in Switzerland and comply with the highest quality standards.

» Swiss Made precision machinery, high fl exibility, highest quality.

Compact formatThe Paraquda placer o� ers a capacity of up to 240 feeder lanes on less than two square meters of foot print without compromising the board size. Thanks to its compact format it o� ers excellent serviceability and easy access during production and maintenance.

Inline or stand-alone models The stand-alone version of the Paraquda is ideally suited for sophisticated electronic assembly in low volumes. All inline machines are SMEMA compatible and are equipped with a three stage conveyer for shortest transportation times.

Large board sizesBoards with dimensions of up to 600 x 430 mm/23.6” x 16.9” (stand-alone) or 600 x 400 mm/23.6” x 15.7” (inline) can be assembled. Universal brackets are available for stand-alone systems for single or double sided boards. Inline models use our time tested and reliable side edge clamps. Various support systems from single to multiple pins are available ensuring excellent assembly results. Even fl ex, rigid-fl ex boards or foils, can be handled on work holders.

High precision placement heads for all applicationsThe Paraquda production centre is equipped with high precision placement heads, each with its own drive and closed loop measurement system. The heads are designed to place all component shapes and forms. There is no need to di� erentiate between low precision chip shooting and high precision placement. This increases the overall precision, eliminates placement errors and simplifi es programming and operation.

Page 7: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

F E E D I N G S O LU T I O N S

Multitude of nozzles for a wide range of applicationsQuick nozzle changes are achieved with an integrated, fully automatic nozzle change system that can change up to four nozzles simultaneously. Standard nozzles are available for all common SMT components, but also for LED’s, bare dies, switches and a multitude of special parts. Essemtec o� ers special nozzles for customized applications with short lead times.

Optical alignmentThe Paraquda placement system is equipped with an optical fl y by alignment system. A superior placement quality is achieved through the measurement of pins for parallelism and tolerances at the same time as the orientation of the components. All parts are recognized with a programmable camera system with adaptive lighting. Teaching of new or unknown SMT parts is easily achieved with a self learning software function.

7

Page 8: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

S W I S S M A D E

4

Page 9: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

CO M P O N E N T S

9

The Paraquda placement equipment is capable to place SMD components of all sizes and pitches. Thanks to electrically driven feeders the presentation of even the

smallest components is accurate and continuously adjusted for the best pick results. Ultra fi ne pitch components such as micro BGAs and CSPs are also readily

Placeable components

DIMM CN

Big AL CNCard Slot

SOP

QFP

SOT

AL CN0402

FBGA

QFN

BGA

12060201

01005

20 mm 50 mm

Component Range

PLCC

MELF

MICRO BGA

SODLED

80 mm

High Power LED

SMT PlaceableRadiators

SpecialConnectors

Odd ShapeComponents

Smart, flexible high-mix SMT production

placed. At the other end of the spectrum the machine is capable to place large components such as heat sinks, electrolyte capacitors and further on a single platform.

Page 10: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

S E T U P

Intelligent component feeders

Essemtec’s Paraquda production system is equipped with a fast bus system that recognizes feeders automatically when loaded. New feeders are immediately included into the speed optimization algorithms and can be inserted or removed without stopping the machine (hot swap). Multicoloured LEDs indicate the status of each feeder directly on the machine.

The system checks automatically for the presence of all required components. Missing components are fl agged and can be kitted while the machine starts production already. The machine and the feeders have indicators and alarms for reels that are nearly fi nished ensuring continuous operation.

Automatic presentationAll pick-up positions are continuously monitored and the presentation of the parts to the pick nozzle is corrected when necessary to compensate any tolerances in the tape.

Maximum feeder capacityThe Paraquda system can be equipped with up to 240 feeder lanes on standalone machines (200 inline). The feeders can be mounted on all four sides of the machine. With the high number of feeders it is possible to leave common components permanently on the machine. Alternatively, it is conceivable to prepare the following job on the machine while production is running. This hot swap concept guarantees uninterrupted changeovers without expensive feeder carts and with much lower component inventory levels.

Compatibility of feedersThe investment in feeders is protected with Essemtec’s universal feeder concept. Feeders of older generations, such as PanX and FLX are equally accepted as the most modern hyQ feeders.

» O� ine kitting, changeovers without interrup-tions, re-kitting during production, quality controlled kitting and feeders for all kinds of components, reels and sticks.

10

Page 11: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

F E E D I N G S O LU T I O N S

8 mm hyQ reel feeders Each feeder can accept various sized components starting from 01005. The electronic feeder drive is software controlled and can be adjusted to 2 and 4 mm steps. Feed speed, tape pull back, and tape acceleration are programmable for each specifi c component and hence even di� cult components are ideally presented.

>12 mm hyQ reel feeders 12 and 16 mm feeders are available in fi xed width or with variable width and have the same functionality as the 8 mm feeders. Feeders that are wider than 16 mm are adjustable to two widths availing even more fl exibility. Hence the investment in feeders can be signifi cantly reduced without impacting the capability to assemble a wide range of components.

Tray holder and automatic changer Trays can be positioned freely within the placement area, behind the transport belts or instead of feeders at the side of the machine. A fully automatic tray changer is also available that handles up to 20 JEDEC trays.

Stick feederA universal stick feeder accepts various widths and types of sticks. A largenumber of di� erent components can bemounted thanks to an adjustable vibrationfrequency as well as an individually settable feeding time.

Tape cut-o� feederTape cut-o� s are common in prototyping and NPI production. Essemtec’s unique cut-o� feeder accommodates all types of tapes and widths and can be kitted directly on the machine. The cut-o� feeders can be placed anywhere on the machine instead of the normal feeders.

Special component feedersA wide range of special feeders are available for the Paraquda, such as feeders for tall components, for through hole components such as LED’s, or bar code stickers for traceability. More details can be found in our special feeder brochure.

11

Page 12: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

S M A R T MO D U L E S

High efficiency and quality – SMART Solution

Today’s SMT manufacturers are faced with a large range of confl icting customer requirements. While margins and lead times are decreasing, production is faced with ever smaller batch sizes, customizations, smaller pitched components and fast changing production

schedules. To make matters worse, stringent requirements on traceability, moisture sensitivity, inventory accuracy and lower stocking levels are introduced. All these factors are addressed with Essemtec’s SMART solution software and hardware.

O� ine programming and feeder kittingNo expensive kitting and programming stations are required for the o� ine programming of the Paraquda. The entire functionality can be reproduced on a standard PC and is transferred via network to the machine. Kitting is preferably done with bar coding support and prevents erroneous kitting by an operator. Reduced defect rates save time and money in the long run.

12

» Raw placement speed does not guarantee an e� cient way to run SMT production. Many other parameters e� ect productivity and improve cost of ownership.

Integrated parts library The SMART combination of intelligent feeders, machines and inventory management a� ord total control of components, inventory levels, usage statistics, shelf life management and traceability. The software alarms operators ahead of time, allowing a pro-active management of the SMT production if parts are running out or if special components need kitting.

Fully automatic MSL controlIPC/JEDEC J-STD-20 specifi cation defi nes the time a moisture sensitive part is allowed in a normal production environment. Moreover, stringent documentation requirements exist for the manufacturing of medical and avionic products. Essemtec’s SMART software modules store all relevant data automatically, create records and stop the production if a part oversteps its fl oor time. In combination with our dry storage inventory systems a complete solution is created for this type of SMT production.

Page 13: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

S M A R T MO D U L E S

13

Turnkey solutionsEssemtec o� ers full turnkey solutions for SMT production including printers, dispensers, pick-and-place machines, ovens, storage systems and even handling systems. Naturally, we also have process engineers to get the lines productive quickly. Essemtec also o� ers the integration of third party equipment.

Connection to MRP/ERP systemsIn today’s SMT production, production plans and parts availability can change quickly. The timeliness of inventory data, fast access to production schedules and reliable data storage are important.

Essemtec o� ers a middle ware program to connect the production fl oor data with the enterprise management system including parts management and inventory control. There is no need to rely on expensive third party integrations and complex interfaces.

Job Preparation

Quality Control

Process Control ERP Database

Goods Entry

Central Storage

Prototyping/Low Volume

Highly flexibleInline Production

Line Storage& Feeder Setup

Job Preparation

Quality Control

Process Control ERP Database

Goods Entry

Central Storage

Prototyping/Low Volume

Highly flexibleHighly flexibleInline ProductionInline Production

Line Storage& Feeder Setup

TraceabilityTraceability for each component and each PCB is increasing in importance, not only for medical or military products. Essemtec’s SMART solution software have full traceability built-in from the get go.

Page 14: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

S M A R T A D D - O N S

14

Quality control and add-on processes included

The Paraquda plattforms o� er addtionally a full range of add-on features in a compact and high quality machine. The machine can be expanded with the following functions.

The Paraquda o� ers the ability to be equipped with a wide variety of dispensing valves for solder paste, adhesives or dam & fi ll materials. Prototypes are easily assembled without the need of stencils reducing your turnaround time considerably. Expensive stepped stencils can be eliminated with the dispensing of additional solder paste. SMT adhesive is dispensed for parts that require additional fi xation during soldering or to improve their drop test reliability. The combination of the various processes is carried out automatically and the machine o� ers easy setup for combined processes. The software is the same as the high speed jet dispenser Scorpion also manufactured by Essemtec and o� ers identical professional high speed dispensing solutions.

I am also a dispenser!

The optional component verifi cation unit increases the quality of fi nished boards and reduces defect rates. Resistors, capacitors, inductors and diodes are measured before placement or after a reel change. Tolerances can be set individually per component. Assembly task requiring records of the actual component value, or precise component matching can be achieved as used in high end audio, implantable medical devices or space and defense applications.

I am also a measurement unit!

Expensive assembly defects caused by the placement of wrong components are completely eliminated with our intelligent feeders and feeder bus system in conjunction with our inventory control software and bar code assisted kitting concept. The humidity controlled storage towers ensure proper stocking of MSL sensitive parts and ensure that no long term failures can creep in.

I am a QC engineer!

» Expand the functionality of your SMT pick-and-place system into a fully loaded SMT production centre.

Page 15: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

„ A L L - I N - O N E “

15

„All-in-one“ SMT production system

The Paraquda system can be ordered in various confi gurations:

„All-in-one“ stand-alone SMT production system Ideally suited for mid volume/high mix production with up to 240 feeder lanes and the possibility to jet and dispense adhesives or solder paste. Available with a 2-axis or 4-axis placement head.

Paraquda

„All-in-one“ inline SMT production system Ideally suited for mid volume/high mix production with up to 200 feeder lanes and interfacing with other SMEMA compatible pre and post processing equipment.

Paraquda-MFC

„All-in-one“ SMT production system Highly fl exible manufacturing solution for high and mid volume applications with up to 360 feeder lanes and the possibility to combine multiple processes like adhesive and solder paste dispensing with pick-and-place in one production system.

Paradoble

Integrated highly fl exible SMT turnkey lineTurnkey SMT manufacturing solution with up to 360 feeder lanes with all features for a SMART manufacturing solution. Optionally dispensing valves can be integrated even on pick-and-place systems.

Para-Line

Page 16: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in
Page 17: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

A new generation SMT pick-and-place machine, designed for the highly flexible SMT production with higher throughput. Places chips, fine pitch and odd-shape

components and dispenses - all in one machine. Operation and programming using new intuitive ePlace user interface.

Page 18: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

S W I S S M A D E

18

Essemtec support and services – global, local help

We are here to help you if needed. Essemtec has experienced, globally distributed service engineers that maintain and support over 6000 installations worldwide.

Context sensitive help All machines are based on our eez-technology (essemtec easy) and include online manuals with context sensitive help. Wherever you are in the user interface, simply touch the help button and the needed explanation pops up.

Trainings Dedicated equipment and process training takes place during installation. Follow up training for new employees and brush up courses can be provided at our training centers or directly at your site. Computer based training courses are also available for self assessed learning.

Regional support and spare part hubs Local service sta� will support you on a daily basis and ensure that necessary spare parts are with you in the shortest possible time.

Hotline support 24/7 Furthermore, our thoroughly trained hotline engineers will answer your questions around the clock and quickly resolve most issues via phone.

Remote accessWith the customer’s permission, our hotline engineers are able to access Essemtec equipment without jeopardizing the safety of the machine or humans around it. A thorough look at the log fi les usually is enough to fi nd the root cause of any given issue quickly and to initiate appropriate action.

Maintenance Get a maintenance contract directly after the warranty period ends. Benefi t from properly maintained equipment and spare parts at a reduced price.

Application support Our application support can help you to fi nd the right solution for all your problems. We have highly skilled, cross functional teams in most areas of SMT production. Our solutions may entail process development for jet dispensing or simulating oven profi les for a given substrate load. Furthermore we do not shy away from hardware modifi cations, special tooling & automation, customized nozzles as well as other specialities.

Lowest cost of ownershipEssemtec machines are designed with the entire assembly process in mind to achieve lowest cost of ownership. Price and placement speed are only two factors in the COO calculation and must be weighed up against others. These include reliability and low maintenance time, number of serviceable parts, quick job setup, fast changeover times, low defect rates, operational e� ciency and reduced waste cost for dispensing applications.

» Do you have a particularly tricky SMT application?

Page 19: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

Essemtec AG • Mosenstrasse 20 • CH-6287 Aesch/LU • Switzerland

Phone: +41 (0)41 919 60 60 • Fax: +41 (0)41 919 60 50 • [email protected] • www.essemtec.com

Sp

eci

fica

tio

ns

PARAQUDA G2 SMD Pick & Place System

Version 1.2, April 2015

Configuration PARA-4-G2 PARA-4C-G2 PARA-2-G2 PARA-2C-G2 PARA-DOBLE-G2

Machine base

Standalone type �

� Inline type

� �

Signal tower (3 color) � � � � � Interior lighting LED � � � � �

PCB Handling

Magnetic PCB holder �

� Inline conveyor 3 stage

� �

Conveyor width adjustment

Manual or auto

Manual or auto

Only Auto adjustment

SMEMA interface

� �

Conveyor batch mode

Control and software

Machine PC with Windows 8.1 and touch screen

� � � � �

Software Language De/E/Pol/Cn/Es � � � � �

Remote support software � � � � �

Alignment systems

Automatic fiducial recognition � � � � � Cognex SMD4 vision � � � � � Multi Field of View (MFOV)

Dispensing valves1) (Max. cartridge size)

Time/pressure valve (30 cm3) Archimedean screw valve (30 cm3) Piezo Flow valve (10 cm3)

Jet valve (30 cm3)

P-Jet valve (10 cm3)

Various Bad mark sensing with vision � � � � � Universal CAD conversion � � � � � Automatic Placement constraints � � � � � Process Improvement tool � � � � � Calibration set P&P / Dispensing � � � � �

� standard feature optional feature

Specifications

PARA-4-G2 PARA-4C-G2 PARA-2-G2 PARA-2C-G2 PARA-DOBLE-G2

Productivity

Theoretical speed / cycle time 15’000 cph / 0.24 sec. 10’500 cph / 0.24 sec. 30’000 cph / 0.24

sec.

Max. placement speed / cycle time 12’000 cph / 0.3 sec. 8’400 cph / 0.3 sec. 24’000 cph / 0.3 sec.

Max. speed mixed PCB (IPC 9850A) 8’400 cph 6’000 cph 12’000 cph

Changeover idle time < 1min (loading job, adjust conveyor, restart production)

Feeder Feeder capacity (8 mm tape) 240 up to 200 2) 240 up to 200 2) up to 400 2)

Feeder type hyQ or CLM, programmable, intelligent, cassette or single feeder

Components Component size range 01005 - 40 x 40 mm incl. leads; with MFOV up to 80 x 70 mm

Mass moment of inertia 60g x cm2

Min. lead pitch 0.3 mm (12 mil)

Min. ball diameter / pitch 0.2 mm Min. component height > 0 mm

Max. component height 18 mm (25 mm) 3)

Process height Up to ± 18 mm (0.71”) from zero height (other heights on request)

Accuracy Linear encoder resolution (x, y) 0.04 µm

Rotation axis resolution 0.007° (for all axes)

Overall placement accuracy (x,y) Chips 51 µm (3σ)4)

Overall placement accuracy (x,y) QFP 39 µm (3σ)4)

PCB Min. PCB dimensions

20 x 20mm (0.8” x 0.8")

50 x 50 mm (2” x 2")

20 x 20 mm (0.8” x 0.8")

50 x 50 mm (2” x 2")

Max. PCB dimensions 600 x 430 mm (23.6” x 16.9”)

600 x 400 mm (23.6” x 15.7”)

600 x 430 mm (23.6” x 16.9”)

600 x 400 mm (23.6” x 15.7”)

Extended PCB (less feeders) on request

PCB thickness 0.5 - 3.5 mm (0.02” - 0.13”)

0.5 - 5 mm (0.02” - 0.2")

0.5 - 3.5 mm (0.02” - 0.13”)

0.5 - 5 mm (0.02”-0.2")

PCB edge clearance

3.0 – 5.0 mm (0.11 – 0.2”)

(varies with PCB thickness)

Top side 3.0 mm (0.11”) / Bottom

side 5.0 mm (0.2”)

3.0 – 5.0 mm (0.11 – 0.2”) (varies with

PCB thickness)

Top side 3.0 mm (0.11”) Bottom side 5.0 mm (0.2”)

Max. Board weight 4kg (8.8 lb)

Clearance below PCB 40 mm (1.57")

Page 20: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

PARAQUDA SMD Pick & Place System

Page 2 of 2

Sp

eci

fica

tio

ns

1) Consult PARAQUDA G2 System Description for possible valve configurations 2) Varies depending board size 3) On request 4) Depending on placement speed, up to 4 different speed modes available. Only applicable to zero height and above mentioned temperature and humidity range

For more information ask for the PARAQUDA G2 System Description We reserve the right to make changes without notice

PARA-4-G2 PARA-4C-G2 PARA-2-G2 PARA-2C-G2 PARA-DOBLE-G2

Machine dimensions

Machine footprint 130 x 145 cm (51.2" x 57.1”) 304 x 145 cm

(118.1" x 57.1")

Operating floor space 210 x 225 cm (82.6” x 88.6”) 380 x 225 cm

(149.6" x 88.6") Machine height 145 cm (57.1”) / 185cm (72.8”) incl. light tower

Machine weight 1’260 kg (2’778 lb) w/o feeder / 1'450 kg (3'197 lb) with feeder 1'450 kg (3'197 lb)

per module

Conveyor height SMEMA: 940 – 965 mm (37” – 38”)

Supplies Electrical 230V / 50Hz or 110V / 60Hz

Power consumption 1 kW 2 kW

Entry Fuse 13A / 230V 13A / 230V per

module

Min. wire cross selection 1.5 mm2 1.5mm2 per module

Earth TN-S

Electrical connector 230V: CEE-16, 16A, 230V, 3P L+N+PE 6h, blue color

110V: CEE-16, 16A, 110V, 3P L+N+PE 4h, yellow color

Compressed air 6-7 bar, clean and filtered, not condensed, ISO 8573-1: class 3 (max part diameter 5 µm, dew point < -20°C, oil ≤ 1 mg/m3 )

Air consumption Max. 60 Nl / min. Max. 60 Nl / min. per

module

Air connection diameter 8 mm 8 mm per module

Environment Temperature 22 - 25°C

Relative humidity 50 - 70%

Noise level 75 dB (A) max.

Page 21: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

The Paraquda-family o� ers proven features and plug & play options that

make it even more fl exible for process control.

2-axis placement head, up to 8‘400 cph* (Paraquda2)

4-axis placement head, up to 12‘000 cph* (Paraquda4)

Up to 240 feeder lanes

Component range 01005 to 80x70 mm, height up to 25 mm

2 dispensing valves can be integrated

Intuitive, easy operation using the platform ePlace

Job and quality management integrated

Feeder exchange during production

Paraquda2 has the same options and fl exibility as Paraquda4 *max. placement speed

P&P head exchange from

Paraquda2 to Paraquda4

Rental of 4-axis placement

head for Paraquda2

The new Paraquda is a fast and accurate placer & dispenser The Paraquda features easy programming and set-up, an intelligent feeder and inventory concept and enables changeover with no downtime.

Essemtec Switzerland

Mosenstrasse 20

6287 Aesch, Lu

Phone: +41 (0)41 919 60 60

Email: [email protected]

„Upgrade / Rent 2 nozzles“ Min. dotsize: Ø 0.4mm with T6 solder paste

Speed up to 80‘000 dots/h

Placement accuracy XY dots: 51 µm @ 3σ

Common solder paste type T4, T5, T6 and T7

Pneumatic actuator

High speed solder paste jetting

Page 22: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

Operation and programmingThe Paraquda ePlace software has an excellent menu structure and is very easy and intuitive to learn. All relevant information is displayed graphically. Complex CAD data is displayed as a virtual circuit board with realistic images of components and therefore comprehensible for anybody. Operators can pre-check the programs visually. Live

monitoring during production.

The new Essemtec Paraquda high speed placer and dispenser

High precision placement heads for all applicationsThe Paraquda placement system is equipped with an optical fl y by alignment system. A superior placement quality is achieved through the measurement of pins for parallelism and tolerances at the same time as the orientation of the components. All parts are recognized with a programmable camera system with adaptive lighting. Teaching of new or unknown SMT parts is easily achieved with a self learning software function.

February 2015, concept: FlS, text: MoS, layout: ErD, © by Essemtec

Dispensing on pick-and-place systemsThe Paraquda o� ers the ability to be equipped with a wide variety of dispensing valves for solder paste, adhesives or dam & fi ll materials. Prototypes are easily assembled without the need of stencils reducing your turnaround time considerably. Expensive stepped stencils can be eliminated with the dispensing of additional solder paste. The same software is used as on the Scorpion and o� ers identical professional high speed dispensing solutions.

Best in class SMT production is guaranteed with high feeder capacity, intelligent kitting, combina-tion of pick-and-place and dispensing processes, and a wide range of component handling.

Page 23: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

A D D - O N VA LU E S

19

Essemtec – more than machines

Today’s business is not predictable anymore. Essemtec gives you more fl exibility to adjust

your equipment set to match the actual economic situation.

Software licensing program Try before you buy! All our SMART suite software modules can be licensed for a limited period at a nominal fee. Experience your productivity gain fi rst hand before you decide to invest in one or all modules. We are convinced that the cost savings will quickly justify the additional investment.

Investment protection Essemtec o� ers predefi ned investment protection programs. If the additional modules do not fi t your growing requirements and you need faster or di� erent machines simply trade in your current equipment for a predefi ned attractive price and get the latest equipment for your next bold move.

Modular approach Hardware and software is fully modular and can be added when needed. Add-on functions to your existing Essemtec products in the fi eld and get more out of your installed equipment base at a small additional cost.

Financing We can help you to get local fi nancing for your new equipment. Simply contact our local specialists for such cases.

Rental programs Feeders and even complete machines can be rented for a certain time to overcome production peaks without the need of a full investment. If you decide to keep the feeders or machines, a large part of the rental fee will be applied towards the purchase price. (Not available in all countries).

Investment protectionEssemtec o� ers predefi ned investment protection programs. If the additional modules do not fi t your growing requirements and you need faster or di� erent machines simply trade in your current equipment for a predefi ned attractive price and get the latest equipment for your next bold move.

Page 24: HIGHLY FLEXIBLE „ALL-IN-ONE“ SMT PRODUCTION SYSTEMS › waUpload › ... · production stop and the ability to combine placement, dispensing and component verifi cation all in

CO N TAC T U S

Essemtec AGMosenstrasse 20CH-6287 Aesch/LUSwitzerlandPhone: +41 (0)41 919 60 60Fax: +41 (0)41 919 60 [email protected]

For a complete list of all representatives and more product information please visit our website: www.essemtec.com

Your local Essemtec partner:

Become a fan:

Disclaimer:The information contained in this brochure is for general information purposes only. The information is provided by Essemtec and whilst we endeavour to keep the information up-to-date and correct, we make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability. Essemtec reserves the right to alter any product or service. Aesch, December 2014

Copyright Information:All materials contained in this brochure are copyright © Essemtec AG, Switzerland. This information is issued to provide outline information only. Use, application or reproduction for any purpose or formation of any order or contract is prohibited unless agreed by Essemtec. Concept: MaZ Text: FrB Layout: ErD