Ink free Yes

Characters per second 750

Can sizes All standard beverage can sizes

Line speed Max. 100,000 products per hour

Text 20 standard fonts, special unicode support on request

Graphics & logos bmp (monochrome), plt

MRC (1-D and 2-D codes) Yes

Operating temperature 5-35°C @ full speed (optional up to 45°C)

Humidity Max. 90% RH, non-condensing

Ingress protection laser, safeguard IP65

Ingress protection chiller, controller IP55

Ingress protection DPX fume extraction IP46

Laser wavelength 1059 – 1065nm

Safety guard material Stainless steel / aluminum hard anodized

USB1.1 port (Laser) Yes

RS232 port (Laser) Yes

Ethernet (10/100 Mbit) (Laser) Yes

Ethernet/IP Optional

Power requirement 100-240VAC, 50-60Hz, 1120VA max.

Power consumption 420VA average (70VA idle)

Laser source life time 100,000 hours (MTBF)

Dimensions 1998mm length, 454mm width, 1640-2040mm height (Guard dimension)

Weight of overall system Water-cooled (DPX1500): 460 kg (1014 lbs)

Vision System Preparation Integration brackets for Cognex Insight 2000 and Insight 7900 available

Guard door locking Optional

Laser Class 1 Yes

Coding lines Two lines, 15 alphanumeric characters per line

Inputs & Outputs

Guard Door Monitoring Two channels for guard door interface

Product Detect Inputs Light Sensor (differential or single-ended)

Product Speed Inputs Shaft Encoder (differential or single-ended)

Machine Control Inputs / Outputs Inputs: Laser Start, Mark Enable, Print Go, Machine Preparation Outputs: Printer Ready, Laser Busy, Compile OK, Door and Flow Sensor Info Optional: 1 Programmable Input, 1 Programmable Output

Fume Extraction Inputs / Outputs Inputs: Vacuum ON, Outputs: Vacuum OK, Door Info

Cooling Inputs / Outputs Input: Air/Chiller On, Outputs: Chiller OK, Air OK

Beacon Outputs 4 Colour Beacon 24V

Beverage Can Coding System Indelible coding. Higher productivity.

Highlights1. Continuous marking of up to 100,000 cans per

hour with one system

2. Purpose-built solution for coding onto aluminium beverage cans

3. Designed for harsh beverage environments and full wash-downs

4. Compliant to Laser Class 1 standards* with required documentation

5. Fast and simple can format changes

6. Prepared for customer vision system integration

7. Improved productivity as unplanned interventions are significantly reduced

8. Simplified optic cleaning

*Compliant to EN60825 part 1+4 F720i/0518 All performance related figures and claims quoted in this document were obtained under specific conditions and may only be replicated under similar conditions. For specific product details, you should contact your Domino Sales Advisor. This document does not form part of any terms and conditions between you and Domino.

www.domino-printing.com

7912 + -40

030

2062

1516

549

140 -060

419 + -40

030

804 -0 15

5

Technical specification

For more detailed information, visit www.domino-printing.com

F720i Fibre Laser High-quality, permanent coding at outstanding production speeds

Camera integration Prepared for customer vision system installation

DPX Fume Extraction Helps to ensure a stable laser printing process

Guarded safety System fully compliant with Laser Class 1 standards**

Your benefits at a glance• Purpose-built beverage solution

• Clearly readable, indelible codes and reduced product holds

• Reduction in consumable costs and cleaning downtime

• Safety compliant with Laser Class 1 standards.

Images may include optional extras or upgrades. Print quality may differ depending on consumables, printer, substrates and other factors. Images and photographs do not form any part of any terms and conditions between you and Domino.

Simpler, Faster, SaferChange the way you are coding your beverage cans

Purpose-built solution from a single sourceDomino understands your needs and has designed a turnkey solution specifically for your beverage production environment: the Beverage Can Coding System. The system includes the industry-leading F720i Fibre Laser.

Now, beverage plants have the opportunity to have perfect traceability codes on every can with almost zero maintenance and no fluids required. The laser is a simple solution, which once running, becomes an almost invisible piece of technology. You will receive a completely documented plug-and-play solution from a single source.

Integrated Beverage Can Coding System

Quick change systemEasily switch to different can formats

Lens protection moduleLens protection to sustain highest print quality and simplify cleaning

Beverage environment Suitable for full wash-down and 100% speed in up to 45°C *

Greater protection through integrationInnovative production solutions often involve equipment sourced from different suppliers, leading to complex integration procedures. The custom designed guarding for this solution ensures improved protection for operators by preventing laser light emission.

Improve production efficiencyFluids-based coding technologies not only tie up monetary resources but can also involve long cleaning and refill procedures, which leads to coder downtime, negatively impacting Overall Equipment Efficiency (OEE). To improve line efficiency, managers can opt for a high-speed laser solution that does not require operator intervention for fluids replenishment.

Simplify your codingCoding errors and the costs associated with recalls or product holds are a problem for beverage companies. A major source of code inconsistency is the unreliable nature of conventional coding technology in high condensation environments. This issue calls for a simplified and reliable coding solution.

Brand protection & legal compliance Clean and clear indelible marking, ideal for compliance purposes and brand protection on aluminium cans. Marketing promotions are also possible with virtually no font, code or graphic restrictions.

DPX Fume Extraction The DPX helps to ensure a stable laser printing process and helps to keep dust from the optics.

Camera integration Simplified integration of a Cognex vision system by provision of custom-fit brackets.

Guarded safety and flexible options The Domino developed protection guard ensures safety compliance with Laser Class 1 standards.**

The system will be supplied with documentation for easy integration. Integrate the Beverage Can Coding System into your PLC or choose the optional plug-and-play safety locking version for maximum laser safety.

Surface integrity The F720i is perfectly suited for engraving homogeneous dots into aluminium which result in very clear high-quality codes. With precise control of pulse energy and intensity, under standard settings the surface is engraved by 11.5µm which is typically 5% of the material thickness, ensuring high surface integrity.

Increased productivity Improved efficiency through the adoption of low intervention technology.Designed for the needs of a 24/7 production process.

F720i Fibre LaserHigh-speed coding Domino’s power concentration achieves high-quality codes on concave surfaces at high-speeds.One system can mark up to 100,000 cans per hour, with over 20 characters per can.

Sustainable manufacturing Sustainable, environmentally friendly form of coding by eliminating the need for chemicals from the coding process.

*with optional chiller**Compliant to EN60825 part 1+4

Lens protection module Optimal protection of the beam guidance against contamination by a protective glass.

Quick and easy changing of the protective glass itself without tools, even during full operation.

Quick change systemSystem designed for easy and quick changes for all standard beverage can sizes.

Beverage environment For easy cleaning the system can be fully washed down and run at 100% speed with a permitted ambient temperature of up to 45°C .